drivers/net/fddi/defxx.c

   1 /*
   2  * File Name:
   3  *   defxx.c
   4  *
   5  * Copyright Information:
   6  *   Copyright Digital Equipment Corporation 1996.
   7  *
   8  *   This software may be used and distributed according to the terms of
   9  *   the GNU General Public License, incorporated herein by reference.
  10  *
  11  * Abstract:
  12  *   A Linux device driver supporting the Digital Equipment Corporation
  13  *   FDDI TURBOchannel, EISA and PCI controller families.  Supported
  14  *   adapters include:
  15  *
  16  *              DEC FDDIcontroller/TURBOchannel (DEFTA)
  17  *              DEC FDDIcontroller/EISA         (DEFEA)
  18  *              DEC FDDIcontroller/PCI          (DEFPA)
  19  *
  20  * The original author:
  21  *   LVS        Lawrence V. Stefani <lstefani@yahoo.com>
  22  *
  23  * Maintainers:
  24  *   macro      Maciej W. Rozycki <macro@linux-mips.org>
  25  *
  26  * Credits:
  27  *   I'd like to thank Patricia Cross for helping me get started with
  28  *   Linux, David Davies for a lot of help upgrading and configuring
  29  *   my development system and for answering many OS and driver
  30  *   development questions, and Alan Cox for recommendations and
  31  *   integration help on getting FDDI support into Linux.  LVS
  32  *
  33  * Driver Architecture:
  34  *   The driver architecture is largely based on previous driver work
  35  *   for other operating systems.  The upper edge interface and
  36  *   functions were largely taken from existing Linux device drivers
  37  *   such as David Davies' DE4X5.C driver and Donald Becker's TULIP.C
  38  *   driver.
  39  *
  40  *   Adapter Probe -
  41  *              The driver scans for supported EISA adapters by reading the
  42  *              SLOT ID register for each EISA slot and making a match
  43  *              against the expected value.
  44  *
  45  *   Bus-Specific Initialization -
  46  *              This driver currently supports both EISA and PCI controller
  47  *              families.  While the custom DMA chip and FDDI logic is similar
  48  *              or identical, the bus logic is very different.  After
  49  *              initialization, the     only bus-specific differences is in how the
  50  *              driver enables and disables interrupts.  Other than that, the
  51  *              run-time critical code behaves the same on both families.
  52  *              It's important to note that both adapter families are configured
  53  *              to I/O map, rather than memory map, the adapter registers.
  54  *
  55  *   Driver Open/Close -
  56  *              In the driver open routine, the driver ISR (interrupt service
  57  *              routine) is registered and the adapter is brought to an
  58  *              operational state.  In the driver close routine, the opposite
  59  *              occurs; the driver ISR is deregistered and the adapter is
  60  *              brought to a safe, but closed state.  Users may use consecutive
  61  *              commands to bring the adapter up and down as in the following
  62  *              example:
  63  *                                      ifconfig fddi0 up
  64  *                                      ifconfig fddi0 down
  65  *                                      ifconfig fddi0 up
  66  *
  67  *   Driver Shutdown -
  68  *              Apparently, there is no shutdown or halt routine support under
  69  *              Linux.  This routine would be called during "reboot" or
  70  *              "shutdown" to allow the driver to place the adapter in a safe
  71  *              state before a warm reboot occurs.  To be really safe, the user
  72  *              should close the adapter before shutdown (eg. ifconfig fddi0 down)
  73  *              to ensure that the adapter DMA engine is taken off-line.  However,
  74  *              the current driver code anticipates this problem and always issues
  75  *              a soft reset of the adapter     at the beginning of driver initialization.
  76  *              A future driver enhancement in this area may occur in 2.1.X where
  77  *              Alan indicated that a shutdown handler may be implemented.
  78  *
  79  *   Interrupt Service Routine -
  80  *              The driver supports shared interrupts, so the ISR is registered for
  81  *              each board with the appropriate flag and the pointer to that board's
  82  *              device structure.  This provides the context during interrupt
  83  *              processing to support shared interrupts and multiple boards.
  84  *
  85  *              Interrupt enabling/disabling can occur at many levels.  At the host
  86  *              end, you can disable system interrupts, or disable interrupts at the
  87  *              PIC (on Intel systems).  Across the bus, both EISA and PCI adapters
  88  *              have a bus-logic chip interrupt enable/disable as well as a DMA
  89  *              controller interrupt enable/disable.
  90  *
  91  *              The driver currently enables and disables adapter interrupts at the
  92  *              bus-logic chip and assumes that Linux will take care of clearing or
  93  *              acknowledging any host-based interrupt chips.
  94  *
  95  *   Control Functions -
  96  *              Control functions are those used to support functions such as adding
  97  *              or deleting multicast addresses, enabling or disabling packet
  98  *              reception filters, or other custom/proprietary commands.  Presently,
  99  *              the driver supports the "get statistics", "set multicast list", and
 100  *              "set mac address" functions defined by Linux.  A list of possible
 101  *              enhancements include:
 102  *
 103  *                              - Custom ioctl interface for executing port interface commands
 104  *                              - Custom ioctl interface for adding unicast addresses to
 105  *                                adapter CAM (to support bridge functions).
 106  *                              - Custom ioctl interface for supporting firmware upgrades.
 107  *
 108  *   Hardware (port interface) Support Routines -
 109  *              The driver function names that start with "dfx_hw_" represent
 110  *              low-level port interface routines that are called frequently.  They
 111  *              include issuing a DMA or port control command to the adapter,
 112  *              resetting the adapter, or reading the adapter state.  Since the
 113  *              driver initialization and run-time code must make calls into the
 114  *              port interface, these routines were written to be as generic and
 115  *              usable as possible.
 116  *
 117  *   Receive Path -
 118  *              The adapter DMA engine supports a 256 entry receive descriptor block
 119  *              of which up to 255 entries can be used at any given time.  The
 120  *              architecture is a standard producer, consumer, completion model in
 121  *              which the driver "produces" receive buffers to the adapter, the
 122  *              adapter "consumes" the receive buffers by DMAing incoming packet data,
 123  *              and the driver "completes" the receive buffers by servicing the
 124  *              incoming packet, then "produces" a new buffer and starts the cycle
 125  *              again.  Receive buffers can be fragmented in up to 16 fragments
 126  *              (descriptor     entries).  For simplicity, this driver posts
 127  *              single-fragment receive buffers of 4608 bytes, then allocates a
 128  *              sk_buff, copies the data, then reposts the buffer.  To reduce CPU
 129  *              utilization, a better approach would be to pass up the receive
 130  *              buffer (no extra copy) then allocate and post a replacement buffer.
 131  *              This is a performance enhancement that should be looked into at
 132  *              some point.
 133  *
 134  *   Transmit Path -
 135  *              Like the receive path, the adapter DMA engine supports a 256 entry
 136  *              transmit descriptor block of which up to 255 entries can be used at
 137  *              any     given time.  Transmit buffers can be fragmented in up to 255
 138  *              fragments (descriptor entries).  This driver always posts one
 139  *              fragment per transmit packet request.
 140  *
 141  *              The fragment contains the entire packet from FC to end of data.
 142  *              Before posting the buffer to the adapter, the driver sets a three-byte
 143  *              packet request header (PRH) which is required by the Motorola MAC chip
 144  *              used on the adapters.  The PRH tells the MAC the type of token to
 145  *              receive/send, whether or not to generate and append the CRC, whether
 146  *              synchronous or asynchronous framing is used, etc.  Since the PRH
 147  *              definition is not necessarily consistent across all FDDI chipsets,
 148  *              the driver, rather than the common FDDI packet handler routines,
 149  *              sets these bytes.
 150  *
 151  *              To reduce the amount of descriptor fetches needed per transmit request,
 152  *              the driver takes advantage of the fact that there are at least three
 153  *              bytes available before the skb->data field on the outgoing transmit
 154  *              request.  This is guaranteed by having fddi_setup() in net_init.c set
 155  *              dev->hard_header_len to 24 bytes.  21 bytes accounts for the largest
 156  *              header in an 802.2 SNAP frame.  The other 3 bytes are the extra "pad"
 157  *              bytes which we'll use to store the PRH.
 158  *
 159  *              There's a subtle advantage to adding these pad bytes to the
 160  *              hard_header_len, it ensures that the data portion of the packet for
 161  *              an 802.2 SNAP frame is longword aligned.  Other FDDI driver
 162  *              implementations may not need the extra padding and can start copying
 163  *              or DMAing directly from the FC byte which starts at skb->data.  Should
 164  *              another driver implementation need ADDITIONAL padding, the net_init.c
 165  *              module should be updated and dev->hard_header_len should be increased.
 166  *              NOTE: To maintain the alignment on the data portion of the packet,
 167  *              dev->hard_header_len should always be evenly divisible by 4 and at
 168  *              least 24 bytes in size.
 169  *
 170  * Modification History:
 171  *              Date            Name    Description
 172  *              16-Aug-96       LVS             Created.
 173  *              20-Aug-96       LVS             Updated dfx_probe so that version information
 174  *                                                      string is only displayed if 1 or more cards are
 175  *                                                      found.  Changed dfx_rcv_queue_process to copy
 176  *                                                      3 NULL bytes before FC to ensure that data is
 177  *                                                      longword aligned in receive buffer.
 178  *              09-Sep-96       LVS             Updated dfx_ctl_set_multicast_list to enable
 179  *                                                      LLC group promiscuous mode if multicast list
 180  *                                                      is too large.  LLC individual/group promiscuous
 181  *                                                      mode is now disabled if IFF_PROMISC flag not set.
 182  *                                                      dfx_xmt_queue_pkt no longer checks for NULL skb
 183  *                                                      on Alan Cox recommendation.  Added node address
 184  *                                                      override support.
 185  *              12-Sep-96       LVS             Reset current address to factory address during
 186  *                                                      device open.  Updated transmit path to post a
 187  *                                                      single fragment which includes PRH->end of data.
 188  *              Mar 2000        AC              Did various cleanups for 2.3.x
 189  *              Jun 2000        jgarzik         PCI and resource alloc cleanups
 190  *              Jul 2000        tjeerd          Much cleanup and some bug fixes
 191  *              Sep 2000        tjeerd          Fix leak on unload, cosmetic code cleanup
 192  *              Feb 2001                        Skb allocation fixes
 193  *              Feb 2001        davej           PCI enable cleanups.
 194  *              04 Aug 2003     macro           Converted to the DMA API.
 195  *              14 Aug 2004     macro           Fix device names reported.
 196  *              14 Jun 2005     macro           Use irqreturn_t.
 197  *              23 Oct 2006     macro           Big-endian host support.
 198  *              14 Dec 2006     macro           TURBOchannel support.
 199  *              01 Jul 2014     macro           Fixes for DMA on 64-bit hosts.
 200  */
 201
 202 /* Include files */
 203 #include <linux/bitops.h>
 204 #include <linux/compiler.h>
 205 #include <linux/delay.h>
 206 #include <linux/dma-mapping.h>
 207 #include <linux/eisa.h>
 208 #include <linux/errno.h>
 209 #include <linux/fddidevice.h>
 210 #include <linux/interrupt.h>
 211 #include <linux/ioport.h>
 212 #include <linux/kernel.h>
 213 #include <linux/module.h>
 214 #include <linux/netdevice.h>
 215 #include <linux/pci.h>
 216 #include <linux/skbuff.h>
 217 #include <linux/slab.h>
 218 #include <linux/string.h>
 219 #include <linux/tc.h>
 220
 221 #include <asm/byteorder.h>
 222 #include <asm/io.h>
 223
 224 #include "defxx.h"
 225
 226 /* Version information string should be updated prior to each new release!  */
 227 #define DRV_NAME "defxx"
 228 #define DRV_VERSION "v1.11"
 229 #define DRV_RELDATE "2014/07/01"
 230
 231 static char version[] =
 232         DRV_NAME ": " DRV_VERSION " " DRV_RELDATE
 233         "  Lawrence V. Stefani and others\n";
 234
 235 #define DYNAMIC_BUFFERS 1
 236
 237 #define SKBUFF_RX_COPYBREAK 200
 238 /*
 239  * NEW_SKB_SIZE = PI_RCV_DATA_K_SIZE_MAX+128 to allow 128 byte
 240  * alignment for compatibility with old EISA boards.
 241  */
 242 #define NEW_SKB_SIZE (PI_RCV_DATA_K_SIZE_MAX+128)
 243
 244 #ifdef CONFIG_EISA
 245 #define DFX_BUS_EISA(dev) (dev->bus == &eisa_bus_type)
 246 #else
 247 #define DFX_BUS_EISA(dev) 0
 248 #endif
 249
 250 #ifdef CONFIG_TC
 251 #define DFX_BUS_TC(dev) (dev->bus == &tc_bus_type)
 252 #else
 253 #define DFX_BUS_TC(dev) 0
 254 #endif
 255
 256 #ifdef CONFIG_DEFXX_MMIO
 257 #define DFX_MMIO 1
 258 #else
 259 #define DFX_MMIO 0
 260 #endif
 261
 262 /* Define module-wide (static) routines */
 263
 264 static void             dfx_bus_init(struct net_device *dev);
 265 static void             dfx_bus_uninit(struct net_device *dev);
 266 static void             dfx_bus_config_check(DFX_board_t *bp);
 267
 268 static int              dfx_driver_init(struct net_device *dev,
 269                                         const char *print_name,
 270                                         resource_size_t bar_start);
 271 static int              dfx_adap_init(DFX_board_t *bp, int get_buffers);
 272
 273 static int              dfx_open(struct net_device *dev);
 274 static int              dfx_close(struct net_device *dev);
 275
 276 static void             dfx_int_pr_halt_id(DFX_board_t *bp);
 277 static void             dfx_int_type_0_process(DFX_board_t *bp);
 278 static void             dfx_int_common(struct net_device *dev);
 279 static irqreturn_t      dfx_interrupt(int irq, void *dev_id);
 280
 281 static struct           net_device_stats *dfx_ctl_get_stats(struct net_device *dev);
 282 static void             dfx_ctl_set_multicast_list(struct net_device *dev);
 283 static int              dfx_ctl_set_mac_address(struct net_device *dev, void *addr);
 284 static int              dfx_ctl_update_cam(DFX_board_t *bp);
 285 static int              dfx_ctl_update_filters(DFX_board_t *bp);
 286
 287 static int              dfx_hw_dma_cmd_req(DFX_board_t *bp);
 288 static int              dfx_hw_port_ctrl_req(DFX_board_t *bp, PI_UINT32 command, PI_UINT32 data_a, PI_UINT32 data_b, PI_UINT32 *host_data);
 289 static void             dfx_hw_adap_reset(DFX_board_t *bp, PI_UINT32 type);
 290 static int              dfx_hw_adap_state_rd(DFX_board_t *bp);
 291 static int              dfx_hw_dma_uninit(DFX_board_t *bp, PI_UINT32 type);
 292
 293 static int              dfx_rcv_init(DFX_board_t *bp, int get_buffers);
 294 static void             dfx_rcv_queue_process(DFX_board_t *bp);
 295 #ifdef DYNAMIC_BUFFERS
 296 static void             dfx_rcv_flush(DFX_board_t *bp);
 297 #else
 298 static inline void      dfx_rcv_flush(DFX_board_t *bp) {}
 299 #endif
 300
 301 static netdev_tx_t dfx_xmt_queue_pkt(struct sk_buff *skb,
 302                                      struct net_device *dev);
 303 static int              dfx_xmt_done(DFX_board_t *bp);
 304 static void             dfx_xmt_flush(DFX_board_t *bp);
 305
 306 /* Define module-wide (static) variables */
 307
 308 static struct pci_driver dfx_pci_driver;
 309 static struct eisa_driver dfx_eisa_driver;
 310 static struct tc_driver dfx_tc_driver;
 311
 312
 313 /*
 314  * =======================
 315  * = dfx_port_write_long =
 316  * = dfx_port_read_long  =
 317  * =======================
 318  *
 319  * Overview:
 320  *   Routines for reading and writing values from/to adapter
 321  *
 322  * Returns:
 323  *   None
 324  *
 325  * Arguments:
 326  *   bp         - pointer to board information
 327  *   offset     - register offset from base I/O address
 328  *   data       - for dfx_port_write_long, this is a value to write;
 329  *                for dfx_port_read_long, this is a pointer to store
 330  *                the read value
 331  *
 332  * Functional Description:
 333  *   These routines perform the correct operation to read or write
 334  *   the adapter register.
 335  *
 336  *   EISA port block base addresses are based on the slot number in which the
 337  *   controller is installed.  For example, if the EISA controller is installed
 338  *   in slot 4, the port block base address is 0x4000.  If the controller is
 339  *   installed in slot 2, the port block base address is 0x2000, and so on.
 340  *   This port block can be used to access PDQ, ESIC, and DEFEA on-board
 341  *   registers using the register offsets defined in DEFXX.H.
 342  *
 343  *   PCI port block base addresses are assigned by the PCI BIOS or system
 344  *   firmware.  There is one 128 byte port block which can be accessed.  It
 345  *   allows for I/O mapping of both PDQ and PFI registers using the register
 346  *   offsets defined in DEFXX.H.
 347  *
 348  * Return Codes:
 349  *   None
 350  *
 351  * Assumptions:
 352  *   bp->base is a valid base I/O address for this adapter.
 353  *   offset is a valid register offset for this adapter.
 354  *
 355  * Side Effects:
 356  *   Rather than produce macros for these functions, these routines
 357  *   are defined using "inline" to ensure that the compiler will
 358  *   generate inline code and not waste a procedure call and return.
 359  *   This provides all the benefits of macros, but with the
 360  *   advantage of strict data type checking.
 361  */
 362
 363 static inline void dfx_writel(DFX_board_t *bp, int offset, u32 data)
 364 {
 365         writel(data, bp->base.mem + offset);
 366         mb();
 367 }
 368
 369 static inline void dfx_outl(DFX_board_t *bp, int offset, u32 data)
 370 {
 371         outl(data, bp->base.port + offset);
 372 }
 373
 374 static void dfx_port_write_long(DFX_board_t *bp, int offset, u32 data)
 375 {
 376         struct device __maybe_unused *bdev = bp->bus_dev;
 377         int dfx_bus_tc = DFX_BUS_TC(bdev);
 378         int dfx_use_mmio = DFX_MMIO || dfx_bus_tc;
 379
 380         if (dfx_use_mmio)
 381                 dfx_writel(bp, offset, data);
 382         else
 383                 dfx_outl(bp, offset, data);
 384 }
 385
 386
 387 static inline void dfx_readl(DFX_board_t *bp, int offset, u32 *data)
 388 {
 389         mb();
 390         *data = readl(bp->base.mem + offset);
 391 }
 392
 393 static inline void dfx_inl(DFX_board_t *bp, int offset, u32 *data)
 394 {
 395         *data = inl(bp->base.port + offset);
 396 }
 397
 398 static void dfx_port_read_long(DFX_board_t *bp, int offset, u32 *data)
 399 {
 400         struct device __maybe_unused *bdev = bp->bus_dev;
 401         int dfx_bus_tc = DFX_BUS_TC(bdev);
 402         int dfx_use_mmio = DFX_MMIO || dfx_bus_tc;
 403
 404         if (dfx_use_mmio)
 405                 dfx_readl(bp, offset, data);
 406         else
 407                 dfx_inl(bp, offset, data);
 408 }
 409
 410
 411 /*
 412  * ================
 413  * = dfx_get_bars =
 414  * ================
 415  *
 416  * Overview:
 417  *   Retrieves the address range used to access control and status
 418  *   registers.
 419  *
 420  * Returns:
 421  *   None
 422  *
 423  * Arguments:
 424  *   bdev       - pointer to device information
 425  *   bar_start  - pointer to store the start address
 426  *   bar_len    - pointer to store the length of the area
 427  *
 428  * Assumptions:
 429  *   I am sure there are some.
 430  *
 431  * Side Effects:
 432  *   None
 433  */
 434 static void dfx_get_bars(struct device *bdev,
 435                          resource_size_t *bar_start, resource_size_t *bar_len)
 436 {
 437         int dfx_bus_pci = dev_is_pci(bdev);
 438         int dfx_bus_eisa = DFX_BUS_EISA(bdev);
 439         int dfx_bus_tc = DFX_BUS_TC(bdev);
 440         int dfx_use_mmio = DFX_MMIO || dfx_bus_tc;
 441
 442         if (dfx_bus_pci) {
 443                 int num = dfx_use_mmio ? 0 : 1;
 444
 445                 *bar_start = pci_resource_start(to_pci_dev(bdev), num);
 446                 *bar_len = pci_resource_len(to_pci_dev(bdev), num);
 447         }
 448         if (dfx_bus_eisa) {
 449                 unsigned long base_addr = to_eisa_device(bdev)->base_addr;
 450                 resource_size_t bar;
 451
 452                 if (dfx_use_mmio) {
 453                         bar = inb(base_addr + PI_ESIC_K_MEM_ADD_CMP_2);
 454                         bar <<= 8;
 455                         bar |= inb(base_addr + PI_ESIC_K_MEM_ADD_CMP_1);
 456                         bar <<= 8;
 457                         bar |= inb(base_addr + PI_ESIC_K_MEM_ADD_CMP_0);
 458                         bar <<= 16;
 459                         *bar_start = bar;
 460                         bar = inb(base_addr + PI_ESIC_K_MEM_ADD_MASK_2);
 461                         bar <<= 8;
 462                         bar |= inb(base_addr + PI_ESIC_K_MEM_ADD_MASK_1);
 463                         bar <<= 8;
 464                         bar |= inb(base_addr + PI_ESIC_K_MEM_ADD_MASK_0);
 465                         bar <<= 16;
 466                         *bar_len = (bar | PI_MEM_ADD_MASK_M) + 1;
 467                 } else {
 468                         *bar_start = base_addr;
 469                         *bar_len = PI_ESIC_K_CSR_IO_LEN;
 470                 }
 471         }
 472         if (dfx_bus_tc) {
 473                 *bar_start = to_tc_dev(bdev)->resource.start +
 474                              PI_TC_K_CSR_OFFSET;
 475                 *bar_len = PI_TC_K_CSR_LEN;
 476         }
 477 }
 478
 479 static const struct net_device_ops dfx_netdev_ops = {
 480         .ndo_open               = dfx_open,
 481         .ndo_stop               = dfx_close,
 482         .ndo_start_xmit         = dfx_xmt_queue_pkt,
 483         .ndo_get_stats          = dfx_ctl_get_stats,
 484         .ndo_set_rx_mode        = dfx_ctl_set_multicast_list,
 485         .ndo_set_mac_address    = dfx_ctl_set_mac_address,
 486 };
 487
 488 /*
 489  * ================
 490  * = dfx_register =
 491  * ================
 492  *
 493  * Overview:
 494  *   Initializes a supported FDDI controller
 495  *
 496  * Returns:
 497  *   Condition code
 498  *
 499  * Arguments:
 500  *   bdev - pointer to device information
 501  *
 502  * Functional Description:
 503  *
 504  * Return Codes:
 505  *   0           - This device (fddi0, fddi1, etc) configured successfully
 506  *   -EBUSY      - Failed to get resources, or dfx_driver_init failed.
 507  *
 508  * Assumptions:
 509  *   It compiles so it should work :-( (PCI cards do :-)
 510  *
 511  * Side Effects:
 512  *   Device structures for FDDI adapters (fddi0, fddi1, etc) are
 513  *   initialized and the board resources are read and stored in
 514  *   the device structure.
 515  */
 516 static int dfx_register(struct device *bdev)
 517 {
 518         static int version_disp;
 519         int dfx_bus_pci = dev_is_pci(bdev);
 520         int dfx_bus_tc = DFX_BUS_TC(bdev);
 521         int dfx_use_mmio = DFX_MMIO || dfx_bus_tc;
 522         const char *print_name = dev_name(bdev);
 523         struct net_device *dev;
 524         DFX_board_t       *bp;                  /* board pointer */
 525         resource_size_t bar_start = 0;          /* pointer to port */
 526         resource_size_t bar_len = 0;            /* resource length */
 527         int alloc_size;                         /* total buffer size used */
 528         struct resource *region;
 529         int err = 0;
 530
 531         if (!version_disp) {    /* display version info if adapter is found */
 532                 version_disp = 1;       /* set display flag to TRUE so that */
 533                 printk(version);        /* we only display this string ONCE */
 534         }
 535
 536         dev = alloc_fddidev(sizeof(*bp));
 537         if (!dev) {
 538                 printk(KERN_ERR "%s: Unable to allocate fddidev, aborting\n",
 539                        print_name);
 540                 return -ENOMEM;
 541         }
 542
 543         /* Enable PCI device. */
 544         if (dfx_bus_pci && pci_enable_device(to_pci_dev(bdev))) {
 545                 printk(KERN_ERR "%s: Cannot enable PCI device, aborting\n",
 546                        print_name);
 547                 goto err_out;
 548         }
 549
 550         SET_NETDEV_DEV(dev, bdev);
 551
 552         bp = netdev_priv(dev);
 553         bp->bus_dev = bdev;
 554         dev_set_drvdata(bdev, dev);
 555
 556         dfx_get_bars(bdev, &bar_start, &bar_len);
 557
 558         if (dfx_use_mmio)
 559                 region = request_mem_region(bar_start, bar_len, print_name);
 560         else
 561                 region = request_region(bar_start, bar_len, print_name);
 562         if (!region) {
 563                 printk(KERN_ERR "%s: Cannot reserve I/O resource "
 564                        "0x%lx @ 0x%lx, aborting\n",
 565                        print_name, (long)bar_len, (long)bar_start);
 566                 err = -EBUSY;
 567                 goto err_out_disable;
 568         }
 569
 570         /* Set up I/O base address. */
 571         if (dfx_use_mmio) {
 572                 bp->base.mem = ioremap_nocache(bar_start, bar_len);
 573                 if (!bp->base.mem) {
 574                         printk(KERN_ERR "%s: Cannot map MMIO\n", print_name);
 575                         err = -ENOMEM;
 576                         goto err_out_region;
 577                 }
 578         } else {
 579                 bp->base.port = bar_start;
 580                 dev->base_addr = bar_start;
 581         }
 582
 583         /* Initialize new device structure */
 584         dev->netdev_ops                 = &dfx_netdev_ops;
 585
 586         if (dfx_bus_pci)
 587                 pci_set_master(to_pci_dev(bdev));
 588
 589         if (dfx_driver_init(dev, print_name, bar_start) != DFX_K_SUCCESS) {
 590                 err = -ENODEV;
 591                 goto err_out_unmap;
 592         }
 593
 594         err = register_netdev(dev);
 595         if (err)
 596                 goto err_out_kfree;
 597
 598         printk("%s: registered as %s\n", print_name, dev->name);
 599         return 0;
 600
 601 err_out_kfree:
 602         alloc_size = sizeof(PI_DESCR_BLOCK) +
 603                      PI_CMD_REQ_K_SIZE_MAX + PI_CMD_RSP_K_SIZE_MAX +
 604 #ifndef DYNAMIC_BUFFERS
 605                      (bp->rcv_bufs_to_post * PI_RCV_DATA_K_SIZE_MAX) +
 606 #endif
 607                      sizeof(PI_CONSUMER_BLOCK) +
 608                      (PI_ALIGN_K_DESC_BLK - 1);
 609         if (bp->kmalloced)
 610                 dma_free_coherent(bdev, alloc_size,
 611                                   bp->kmalloced, bp->kmalloced_dma);
 612
 613 err_out_unmap:
 614         if (dfx_use_mmio)
 615                 iounmap(bp->base.mem);
 616
 617 err_out_region:
 618         if (dfx_use_mmio)
 619                 release_mem_region(bar_start, bar_len);
 620         else
 621                 release_region(bar_start, bar_len);
 622
 623 err_out_disable:
 624         if (dfx_bus_pci)
 625                 pci_disable_device(to_pci_dev(bdev));
 626
 627 err_out:
 628         free_netdev(dev);
 629         return err;
 630 }
 631
 632
 633 /*
 634  * ================
 635  * = dfx_bus_init =
 636  * ================
 637  *
 638  * Overview:
 639  *   Initializes the bus-specific controller logic.
 640  *
 641  * Returns:
 642  *   None
 643  *
 644  * Arguments:
 645  *   dev - pointer to device information
 646  *
 647  * Functional Description:
 648  *   Determine and save adapter IRQ in device table,
 649  *   then perform bus-specific logic initialization.
 650  *
 651  * Return Codes:
 652  *   None
 653  *
 654  * Assumptions:
 655  *   bp->base has already been set with the proper
 656  *       base I/O address for this device.
 657  *
 658  * Side Effects:
 659  *   Interrupts are enabled at the adapter bus-specific logic.
 660  *   Note:  Interrupts at the DMA engine (PDQ chip) are not
 661  *   enabled yet.
 662  */
 663
 664 static void dfx_bus_init(struct net_device *dev)
 665 {
 666         DFX_board_t *bp = netdev_priv(dev);
 667         struct device *bdev = bp->bus_dev;
 668         int dfx_bus_pci = dev_is_pci(bdev);
 669         int dfx_bus_eisa = DFX_BUS_EISA(bdev);
 670         int dfx_bus_tc = DFX_BUS_TC(bdev);
 671         int dfx_use_mmio = DFX_MMIO || dfx_bus_tc;
 672         u8 val;
 673
 674         DBG_printk("In dfx_bus_init...\n");
 675
 676         /* Initialize a pointer back to the net_device struct */
 677         bp->dev = dev;
 678
 679         /* Initialize adapter based on bus type */
 680
 681         if (dfx_bus_tc)
 682                 dev->irq = to_tc_dev(bdev)->interrupt;
 683         if (dfx_bus_eisa) {
 684                 unsigned long base_addr = to_eisa_device(bdev)->base_addr;
 685
 686                 /* Get the interrupt level from the ESIC chip.  */
 687                 val = inb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0);
 688                 val &= PI_CONFIG_STAT_0_M_IRQ;
 689                 val >>= PI_CONFIG_STAT_0_V_IRQ;
 690
 691                 switch (val) {
 692                 case PI_CONFIG_STAT_0_IRQ_K_9:
 693                         dev->irq = 9;
 694                         break;
 695
 696                 case PI_CONFIG_STAT_0_IRQ_K_10:
 697                         dev->irq = 10;
 698                         break;
 699
 700                 case PI_CONFIG_STAT_0_IRQ_K_11:
 701                         dev->irq = 11;
 702                         break;
 703
 704                 case PI_CONFIG_STAT_0_IRQ_K_15:
 705                         dev->irq = 15;
 706                         break;
 707                 }
 708
 709                 /*
 710                  * Enable memory decoding (MEMCS0) and/or port decoding
 711                  * (IOCS1/IOCS0) as appropriate in Function Control
 712                  * Register.  One of the port chip selects seems to be
 713                  * used for the Burst Holdoff register, but this bit of
 714                  * documentation is missing and as yet it has not been
 715                  * determined which of the two.  This is also the reason
 716                  * the size of the decoded port range is twice as large
 717                  * as one required by the PDQ.
 718                  */
 719
 720                 /* Set the decode range of the board.  */
 721                 val = ((bp->base.port >> 12) << PI_IO_CMP_V_SLOT);
 722                 outb(base_addr + PI_ESIC_K_IO_ADD_CMP_0_1, val);
 723                 outb(base_addr + PI_ESIC_K_IO_ADD_CMP_0_0, 0);
 724                 outb(base_addr + PI_ESIC_K_IO_ADD_CMP_1_1, val);
 725                 outb(base_addr + PI_ESIC_K_IO_ADD_CMP_1_0, 0);
 726                 val = PI_ESIC_K_CSR_IO_LEN - 1;
 727                 outb(base_addr + PI_ESIC_K_IO_ADD_MASK_0_1, (val >> 8) & 0xff);
 728                 outb(base_addr + PI_ESIC_K_IO_ADD_MASK_0_0, val & 0xff);
 729                 outb(base_addr + PI_ESIC_K_IO_ADD_MASK_1_1, (val >> 8) & 0xff);
 730                 outb(base_addr + PI_ESIC_K_IO_ADD_MASK_1_0, val & 0xff);
 731
 732                 /* Enable the decoders.  */
 733                 val = PI_FUNCTION_CNTRL_M_IOCS1 | PI_FUNCTION_CNTRL_M_IOCS0;
 734                 if (dfx_use_mmio)
 735                         val |= PI_FUNCTION_CNTRL_M_MEMCS0;
 736                 outb(base_addr + PI_ESIC_K_FUNCTION_CNTRL, val);
 737
 738                 /*
 739                  * Enable access to the rest of the module
 740                  * (including PDQ and packet memory).
 741                  */
 742                 val = PI_SLOT_CNTRL_M_ENB;
 743                 outb(base_addr + PI_ESIC_K_SLOT_CNTRL, val);
 744
 745                 /*
 746                  * Map PDQ registers into memory or port space.  This is
 747                  * done with a bit in the Burst Holdoff register.
 748                  */
 749                 val = inb(base_addr + PI_DEFEA_K_BURST_HOLDOFF);
 750                 if (dfx_use_mmio)
 751                         val |= PI_BURST_HOLDOFF_V_MEM_MAP;
 752                 else
 753                         val &= ~PI_BURST_HOLDOFF_V_MEM_MAP;
 754                 outb(base_addr + PI_DEFEA_K_BURST_HOLDOFF, val);
 755
 756                 /* Enable interrupts at EISA bus interface chip (ESIC) */
 757                 val = inb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0);
 758                 val |= PI_CONFIG_STAT_0_M_INT_ENB;
 759                 outb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0, val);
 760         }
 761         if (dfx_bus_pci) {
 762                 struct pci_dev *pdev = to_pci_dev(bdev);
 763
 764                 /* Get the interrupt level from the PCI Configuration Table */
 765
 766                 dev->irq = pdev->irq;
 767
 768                 /* Check Latency Timer and set if less than minimal */
 769
 770                 pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &val);
 771                 if (val < PFI_K_LAT_TIMER_MIN) {
 772                         val = PFI_K_LAT_TIMER_DEF;
 773                         pci_write_config_byte(pdev, PCI_LATENCY_TIMER, val);
 774                 }
 775
 776                 /* Enable interrupts at PCI bus interface chip (PFI) */
 777                 val = PFI_MODE_M_PDQ_INT_ENB | PFI_MODE_M_DMA_ENB;
 778                 dfx_port_write_long(bp, PFI_K_REG_MODE_CTRL, val);
 779         }
 780 }
 781
 782 /*
 783  * ==================
 784  * = dfx_bus_uninit =
 785  * ==================
 786  *
 787  * Overview:
 788  *   Uninitializes the bus-specific controller logic.
 789  *
 790  * Returns:
 791  *   None
 792  *
 793  * Arguments:
 794  *   dev - pointer to device information
 795  *
 796  * Functional Description:
 797  *   Perform bus-specific logic uninitialization.
 798  *
 799  * Return Codes:
 800  *   None
 801  *
 802  * Assumptions:
 803  *   bp->base has already been set with the proper
 804  *       base I/O address for this device.
 805  *
 806  * Side Effects:
 807  *   Interrupts are disabled at the adapter bus-specific logic.
 808  */
 809
 810 static void dfx_bus_uninit(struct net_device *dev)
 811 {
 812         DFX_board_t *bp = netdev_priv(dev);
 813         struct device *bdev = bp->bus_dev;
 814         int dfx_bus_pci = dev_is_pci(bdev);
 815         int dfx_bus_eisa = DFX_BUS_EISA(bdev);
 816         u8 val;
 817
 818         DBG_printk("In dfx_bus_uninit...\n");
 819
 820         /* Uninitialize adapter based on bus type */
 821
 822         if (dfx_bus_eisa) {
 823                 unsigned long base_addr = to_eisa_device(bdev)->base_addr;
 824
 825                 /* Disable interrupts at EISA bus interface chip (ESIC) */
 826                 val = inb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0);
 827                 val &= ~PI_CONFIG_STAT_0_M_INT_ENB;
 828                 outb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0, val);
 829         }
 830         if (dfx_bus_pci) {
 831                 /* Disable interrupts at PCI bus interface chip (PFI) */
 832                 dfx_port_write_long(bp, PFI_K_REG_MODE_CTRL, 0);
 833         }
 834 }
 835
 836
 837 /*
 838  * ========================
 839  * = dfx_bus_config_check =
 840  * ========================
 841  *
 842  * Overview:
 843  *   Checks the configuration (burst size, full-duplex, etc.)  If any parameters
 844  *   are illegal, then this routine will set new defaults.
 845  *
 846  * Returns:
 847  *   None
 848  *
 849  * Arguments:
 850  *   bp - pointer to board information
 851  *
 852  * Functional Description:
 853  *   For Revision 1 FDDI EISA, Revision 2 or later FDDI EISA with rev E or later
 854  *   PDQ, and all FDDI PCI controllers, all values are legal.
 855  *
 856  * Return Codes:
 857  *   None
 858  *
 859  * Assumptions:
 860  *   dfx_adap_init has NOT been called yet so burst size and other items have
 861  *   not been set.
 862  *
 863  * Side Effects:
 864  *   None
 865  */
 866
 867 static void dfx_bus_config_check(DFX_board_t *bp)
 868 {
 869         struct device __maybe_unused *bdev = bp->bus_dev;
 870         int dfx_bus_eisa = DFX_BUS_EISA(bdev);
 871         int     status;                         /* return code from adapter port control call */
 872         u32     host_data;                      /* LW data returned from port control call */
 873
 874         DBG_printk("In dfx_bus_config_check...\n");
 875
 876         /* Configuration check only valid for EISA adapter */
 877
 878         if (dfx_bus_eisa) {
 879                 /*
 880                  * First check if revision 2 EISA controller.  Rev. 1 cards used
 881                  * PDQ revision B, so no workaround needed in this case.  Rev. 3
 882                  * cards used PDQ revision E, so no workaround needed in this
 883                  * case, either.  Only Rev. 2 cards used either Rev. D or E
 884                  * chips, so we must verify the chip revision on Rev. 2 cards.
 885                  */
 886                 if (to_eisa_device(bdev)->id.driver_data == DEFEA_PROD_ID_2) {
 887                         /*
 888                          * Revision 2 FDDI EISA controller found,
 889                          * so let's check PDQ revision of adapter.
 890                          */
 891                         status = dfx_hw_port_ctrl_req(bp,
 892                                                                                         PI_PCTRL_M_SUB_CMD,
 893                                                                                         PI_SUB_CMD_K_PDQ_REV_GET,
 894                                                                                         0,
 895                                                                                         &host_data);
 896                         if ((status != DFX_K_SUCCESS) || (host_data == 2))
 897                                 {
 898                                 /*
 899                                  * Either we couldn't determine the PDQ revision, or
 900                                  * we determined that it is at revision D.  In either case,
 901                                  * we need to implement the workaround.
 902                                  */
 903
 904                                 /* Ensure that the burst size is set to 8 longwords or less */
 905
 906                                 switch (bp->burst_size)
 907                                         {
 908                                         case PI_PDATA_B_DMA_BURST_SIZE_32:
 909                                         case PI_PDATA_B_DMA_BURST_SIZE_16:
 910                                                 bp->burst_size = PI_PDATA_B_DMA_BURST_SIZE_8;
 911                                                 break;
 912
 913                                         default:
 914                                                 break;
 915                                         }
 916
 917                                 /* Ensure that full-duplex mode is not enabled */
 918
 919                                 bp->full_duplex_enb = PI_SNMP_K_FALSE;
 920                                 }
 921                         }
 922                 }
 923         }
 924
 925
 926 /*
 927  * ===================
 928  * = dfx_driver_init =
 929  * ===================
 930  *
 931  * Overview:
 932  *   Initializes remaining adapter board structure information
 933  *   and makes sure adapter is in a safe state prior to dfx_open().
 934  *
 935  * Returns:
 936  *   Condition code
 937  *
 938  * Arguments:
 939  *   dev - pointer to device information
 940  *   print_name - printable device name
 941  *
 942  * Functional Description:
 943  *   This function allocates additional resources such as the host memory
 944  *   blocks needed by the adapter (eg. descriptor and consumer blocks).
 945  *       Remaining bus initialization steps are also completed.  The adapter
 946  *   is also reset so that it is in the DMA_UNAVAILABLE state.  The OS
 947  *   must call dfx_open() to open the adapter and bring it on-line.
 948  *
 949  * Return Codes:
 950  *   DFX_K_SUCCESS      - initialization succeeded
 951  *   DFX_K_FAILURE      - initialization failed - could not allocate memory
 952  *                                              or read adapter MAC address
 953  *
 954  * Assumptions:
 955  *   Memory allocated from pci_alloc_consistent() call is physically
 956  *   contiguous, locked memory.
 957  *
 958  * Side Effects:
 959  *   Adapter is reset and should be in DMA_UNAVAILABLE state before
 960  *   returning from this routine.
 961  */
 962
 963 static int dfx_driver_init(struct net_device *dev, const char *print_name,
 964                            resource_size_t bar_start)
 965 {
 966         DFX_board_t *bp = netdev_priv(dev);
 967         struct device *bdev = bp->bus_dev;
 968         int dfx_bus_pci = dev_is_pci(bdev);
 969         int dfx_bus_eisa = DFX_BUS_EISA(bdev);
 970         int dfx_bus_tc = DFX_BUS_TC(bdev);
 971         int dfx_use_mmio = DFX_MMIO || dfx_bus_tc;
 972         int alloc_size;                 /* total buffer size needed */
 973         char *top_v, *curr_v;           /* virtual addrs into memory block */
 974         dma_addr_t top_p, curr_p;       /* physical addrs into memory block */
 975         u32 data;                       /* host data register value */
 976         __le32 le32;
 977         char *board_name = NULL;
 978
 979         DBG_printk("In dfx_driver_init...\n");
 980
 981         /* Initialize bus-specific hardware registers */
 982
 983         dfx_bus_init(dev);
 984
 985         /*
 986          * Initialize default values for configurable parameters
 987          *
 988          * Note: All of these parameters are ones that a user may
 989          *       want to customize.  It'd be nice to break these
 990          *               out into Space.c or someplace else that's more
 991          *               accessible/understandable than this file.
 992          */
 993
 994         bp->full_duplex_enb             = PI_SNMP_K_FALSE;
 995         bp->req_ttrt                    = 8 * 12500;            /* 8ms in 80 nanosec units */
 996         bp->burst_size                  = PI_PDATA_B_DMA_BURST_SIZE_DEF;
 997         bp->rcv_bufs_to_post    = RCV_BUFS_DEF;
 998
 999         /*
1000          * Ensure that HW configuration is OK
1001          *
1002          * Note: Depending on the hardware revision, we may need to modify
1003          *       some of the configurable parameters to workaround hardware
1004          *       limitations.  We'll perform this configuration check AFTER
1005          *       setting the parameters to their default values.
1006          */
1007
1008         dfx_bus_config_check(bp);
1009
1010         /* Disable PDQ interrupts first */
1011
1012         dfx_port_write_long(bp, PI_PDQ_K_REG_HOST_INT_ENB, PI_HOST_INT_K_DISABLE_ALL_INTS);
1013
1014         /* Place adapter in DMA_UNAVAILABLE state by resetting adapter */
1015
1016         (void) dfx_hw_dma_uninit(bp, PI_PDATA_A_RESET_M_SKIP_ST);
1017
1018         /*  Read the factory MAC address from the adapter then save it */
1019
1020         if (dfx_hw_port_ctrl_req(bp, PI_PCTRL_M_MLA, PI_PDATA_A_MLA_K_LO, 0,
1021                                  &data) != DFX_K_SUCCESS) {
1022                 printk("%s: Could not read adapter factory MAC address!\n",
1023                        print_name);
1024                 return DFX_K_FAILURE;
1025         }
1026         le32 = cpu_to_le32(data);
1027         memcpy(&bp->factory_mac_addr[0], &le32, sizeof(u32));
1028
1029         if (dfx_hw_port_ctrl_req(bp, PI_PCTRL_M_MLA, PI_PDATA_A_MLA_K_HI, 0,
1030                                  &data) != DFX_K_SUCCESS) {
1031                 printk("%s: Could not read adapter factory MAC address!\n",
1032                        print_name);
1033                 return DFX_K_FAILURE;
1034         }
1035         le32 = cpu_to_le32(data);
1036         memcpy(&bp->factory_mac_addr[4], &le32, sizeof(u16));
1037
1038         /*
1039          * Set current address to factory address
1040          *
1041          * Note: Node address override support is handled through
1042          *       dfx_ctl_set_mac_address.
1043          */
1044
1045         memcpy(dev->dev_addr, bp->factory_mac_addr, FDDI_K_ALEN);
1046         if (dfx_bus_tc)
1047                 board_name = "DEFTA";
1048         if (dfx_bus_eisa)
1049                 board_name = "DEFEA";
1050         if (dfx_bus_pci)
1051                 board_name = "DEFPA";
1052         pr_info("%s: %s at %saddr = 0x%llx, IRQ = %d, Hardware addr = %pMF\n",
1053                 print_name, board_name, dfx_use_mmio ? "" : "I/O ",
1054                 (long long)bar_start, dev->irq, dev->dev_addr);
1055
1056         /*
1057          * Get memory for descriptor block, consumer block, and other buffers
1058          * that need to be DMA read or written to by the adapter.
1059          */
1060
1061         alloc_size = sizeof(PI_DESCR_BLOCK) +
1062                                         PI_CMD_REQ_K_SIZE_MAX +
1063                                         PI_CMD_RSP_K_SIZE_MAX +
1064 #ifndef DYNAMIC_BUFFERS
1065                                         (bp->rcv_bufs_to_post * PI_RCV_DATA_K_SIZE_MAX) +
1066 #endif
1067                                         sizeof(PI_CONSUMER_BLOCK) +
1068                                         (PI_ALIGN_K_DESC_BLK - 1);
1069         bp->kmalloced = top_v = dma_zalloc_coherent(bp->bus_dev, alloc_size,
1070                                                     &bp->kmalloced_dma,
1071                                                     GFP_ATOMIC);
1072         if (top_v == NULL)
1073                 return DFX_K_FAILURE;
1074
1075         top_p = bp->kmalloced_dma;      /* get physical address of buffer */
1076
1077         /*
1078          *  To guarantee the 8K alignment required for the descriptor block, 8K - 1
1079          *  plus the amount of memory needed was allocated.  The physical address
1080          *      is now 8K aligned.  By carving up the memory in a specific order,
1081          *  we'll guarantee the alignment requirements for all other structures.
1082          *
1083          *  Note: If the assumptions change regarding the non-paged, non-cached,
1084          *                physically contiguous nature of the memory block or the address
1085          *                alignments, then we'll need to implement a different algorithm
1086          *                for allocating the needed memory.
1087          */
1088
1089         curr_p = ALIGN(top_p, PI_ALIGN_K_DESC_BLK);
1090         curr_v = top_v + (curr_p - top_p);
1091
1092         /* Reserve space for descriptor block */
1093
1094         bp->descr_block_virt = (PI_DESCR_BLOCK *) curr_v;
1095         bp->descr_block_phys = curr_p;
1096         curr_v += sizeof(PI_DESCR_BLOCK);
1097         curr_p += sizeof(PI_DESCR_BLOCK);
1098
1099         /* Reserve space for command request buffer */
1100
1101         bp->cmd_req_virt = (PI_DMA_CMD_REQ *) curr_v;
1102         bp->cmd_req_phys = curr_p;
1103         curr_v += PI_CMD_REQ_K_SIZE_MAX;
1104         curr_p += PI_CMD_REQ_K_SIZE_MAX;
1105
1106         /* Reserve space for command response buffer */
1107
1108         bp->cmd_rsp_virt = (PI_DMA_CMD_RSP *) curr_v;
1109         bp->cmd_rsp_phys = curr_p;
1110         curr_v += PI_CMD_RSP_K_SIZE_MAX;
1111         curr_p += PI_CMD_RSP_K_SIZE_MAX;
1112
1113         /* Reserve space for the LLC host receive queue buffers */
1114
1115         bp->rcv_block_virt = curr_v;
1116         bp->rcv_block_phys = curr_p;
1117
1118 #ifndef DYNAMIC_BUFFERS
1119         curr_v += (bp->rcv_bufs_to_post * PI_RCV_DATA_K_SIZE_MAX);
1120         curr_p += (bp->rcv_bufs_to_post * PI_RCV_DATA_K_SIZE_MAX);
1121 #endif
1122
1123         /* Reserve space for the consumer block */
1124
1125         bp->cons_block_virt = (PI_CONSUMER_BLOCK *) curr_v;
1126         bp->cons_block_phys = curr_p;
1127
1128         /* Display virtual and physical addresses if debug driver */
1129
1130         DBG_printk("%s: Descriptor block virt = %p, phys = %pad\n",
1131                    print_name, bp->descr_block_virt, &bp->descr_block_phys);
1132         DBG_printk("%s: Command Request buffer virt = %p, phys = %pad\n",
1133                    print_name, bp->cmd_req_virt, &bp->cmd_req_phys);
1134         DBG_printk("%s: Command Response buffer virt = %p, phys = %pad\n",
1135                    print_name, bp->cmd_rsp_virt, &bp->cmd_rsp_phys);
1136         DBG_printk("%s: Receive buffer block virt = %p, phys = %pad\n",
1137                    print_name, bp->rcv_block_virt, &bp->rcv_block_phys);
1138         DBG_printk("%s: Consumer block virt = %p, phys = %pad\n",
1139                    print_name, bp->cons_block_virt, &bp->cons_block_phys);
1140
1141         return DFX_K_SUCCESS;
1142 }
1143
1144
1145 /*
1146  * =================
1147  * = dfx_adap_init =
1148  * =================
1149  *
1150  * Overview:
1151  *   Brings the adapter to the link avail/link unavailable state.
1152  *
1153  * Returns:
1154  *   Condition code
1155  *
1156  * Arguments:
1157  *   bp - pointer to board information
1158  *   get_buffers - non-zero if buffers to be allocated
1159  *
1160  * Functional Description:
1161  *   Issues the low-level firmware/hardware calls necessary to bring
1162  *   the adapter up, or to properly reset and restore adapter during
1163  *   run-time.
1164  *
1165  * Return Codes:
1166  *   DFX_K_SUCCESS - Adapter brought up successfully
1167  *   DFX_K_FAILURE - Adapter initialization failed
1168  *
1169  * Assumptions:
1170  *   bp->reset_type should be set to a valid reset type value before
1171  *   calling this routine.
1172  *
1173  * Side Effects:
1174  *   Adapter should be in LINK_AVAILABLE or LINK_UNAVAILABLE state
1175  *   upon a successful return of this routine.
1176  */
1177
1178 static int dfx_adap_init(DFX_board_t *bp, int get_buffers)
1179         {
1180         DBG_printk("In dfx_adap_init...\n");
1181
1182         /* Disable PDQ interrupts first */
1183
1184         dfx_port_write_long(bp, PI_PDQ_K_REG_HOST_INT_ENB, PI_HOST_INT_K_DISABLE_ALL_INTS);
1185
1186         /* Place adapter in DMA_UNAVAILABLE state by resetting adapter */
1187
1188         if (dfx_hw_dma_uninit(bp, bp->reset_type) != DFX_K_SUCCESS)
1189                 {
1190                 printk("%s: Could not uninitialize/reset adapter!\n", bp->dev->name);
1191                 return DFX_K_FAILURE;
1192                 }
1193
1194         /*
1195          * When the PDQ is reset, some false Type 0 interrupts may be pending,
1196          * so we'll acknowledge all Type 0 interrupts now before continuing.
1197          */
1198
1199         dfx_port_write_long(bp, PI_PDQ_K_REG_TYPE_0_STATUS, PI_HOST_INT_K_ACK_ALL_TYPE_0);
1200
1201         /*
1202          * Clear Type 1 and Type 2 registers before going to DMA_AVAILABLE state
1203          *
1204          * Note: We only need to clear host copies of these registers.  The PDQ reset
1205          *       takes care of the on-board register values.
1206          */
1207
1208         bp->cmd_req_reg.lword   = 0;
1209         bp->cmd_rsp_reg.lword   = 0;
1210         bp->rcv_xmt_reg.lword   = 0;
1211
1212         /* Clear consumer block before going to DMA_AVAILABLE state */
1213
1214         memset(bp->cons_block_virt, 0, sizeof(PI_CONSUMER_BLOCK));
1215
1216         /* Initialize the DMA Burst Size */
1217
1218         if (dfx_hw_port_ctrl_req(bp,
1219                                                         PI_PCTRL_M_SUB_CMD,
1220                                                         PI_SUB_CMD_K_BURST_SIZE_SET,
1221                                                         bp->burst_size,
1222                                                         NULL) != DFX_K_SUCCESS)
1223                 {
1224                 printk("%s: Could not set adapter burst size!\n", bp->dev->name);
1225                 return DFX_K_FAILURE;
1226                 }
1227
1228         /*
1229          * Set base address of Consumer Block
1230          *
1231          * Assumption: 32-bit physical address of consumer block is 64 byte
1232          *                         aligned.  That is, bits 0-5 of the address must be zero.
1233          */
1234
1235         if (dfx_hw_port_ctrl_req(bp,
1236                                                         PI_PCTRL_M_CONS_BLOCK,
1237                                                         bp->cons_block_phys,
1238                                                         0,
1239                                                         NULL) != DFX_K_SUCCESS)
1240                 {
1241                 printk("%s: Could not set consumer block address!\n", bp->dev->name);
1242                 return DFX_K_FAILURE;
1243                 }
1244
1245         /*
1246          * Set the base address of Descriptor Block and bring adapter
1247          * to DMA_AVAILABLE state.
1248          *
1249          * Note: We also set the literal and data swapping requirements
1250          *       in this command.
1251          *
1252          * Assumption: 32-bit physical address of descriptor block
1253          *       is 8Kbyte aligned.
1254          */
1255         if (dfx_hw_port_ctrl_req(bp, PI_PCTRL_M_INIT,
1256                                  (u32)(bp->descr_block_phys |
1257                                        PI_PDATA_A_INIT_M_BSWAP_INIT),
1258                                  0, NULL) != DFX_K_SUCCESS) {
1259                 printk("%s: Could not set descriptor block address!\n",
1260                        bp->dev->name);
1261                 return DFX_K_FAILURE;
1262         }
1263
1264         /* Set transmit flush timeout value */
1265
1266         bp->cmd_req_virt->cmd_type = PI_CMD_K_CHARS_SET;
1267         bp->cmd_req_virt->char_set.item[0].item_code    = PI_ITEM_K_FLUSH_TIME;
1268         bp->cmd_req_virt->char_set.item[0].value                = 3;    /* 3 seconds */
1269         bp->cmd_req_virt->char_set.item[0].item_index   = 0;
1270         bp->cmd_req_virt->char_set.item[1].item_code    = PI_ITEM_K_EOL;
1271         if (dfx_hw_dma_cmd_req(bp) != DFX_K_SUCCESS)
1272                 {
1273                 printk("%s: DMA command request failed!\n", bp->dev->name);
1274                 return DFX_K_FAILURE;
1275                 }
1276
1277         /* Set the initial values for eFDXEnable and MACTReq MIB objects */
1278
1279         bp->cmd_req_virt->cmd_type = PI_CMD_K_SNMP_SET;
1280         bp->cmd_req_virt->snmp_set.item[0].item_code    = PI_ITEM_K_FDX_ENB_DIS;
1281         bp->cmd_req_virt->snmp_set.item[0].value                = bp->full_duplex_enb;
1282         bp->cmd_req_virt->snmp_set.item[0].item_index   = 0;
1283         bp->cmd_req_virt->snmp_set.item[1].item_code    = PI_ITEM_K_MAC_T_REQ;
1284         bp->cmd_req_virt->snmp_set.item[1].value                = bp->req_ttrt;
1285         bp->cmd_req_virt->snmp_set.item[1].item_index   = 0;
1286         bp->cmd_req_virt->snmp_set.item[2].item_code    = PI_ITEM_K_EOL;
1287         if (dfx_hw_dma_cmd_req(bp) != DFX_K_SUCCESS)
1288                 {
1289                 printk("%s: DMA command request failed!\n", bp->dev->name);
1290                 return DFX_K_FAILURE;
1291                 }
1292
1293         /* Initialize adapter CAM */
1294
1295         if (dfx_ctl_update_cam(bp) != DFX_K_SUCCESS)
1296                 {
1297                 printk("%s: Adapter CAM update failed!\n", bp->dev->name);
1298                 return DFX_K_FAILURE;
1299                 }
1300
1301         /* Initialize adapter filters */
1302
1303         if (dfx_ctl_update_filters(bp) != DFX_K_SUCCESS)
1304                 {
1305                 printk("%s: Adapter filters update failed!\n", bp->dev->name);
1306                 return DFX_K_FAILURE;
1307                 }
1308
1309         /*
1310          * Remove any existing dynamic buffers (i.e. if the adapter is being
1311          * reinitialized)
1312          */
1313
1314         if (get_buffers)
1315                 dfx_rcv_flush(bp);
1316
1317         /* Initialize receive descriptor block and produce buffers */
1318
1319         if (dfx_rcv_init(bp, get_buffers))
1320                 {
1321                 printk("%s: Receive buffer allocation failed\n", bp->dev->name);
1322                 if (get_buffers)
1323                         dfx_rcv_flush(bp);
1324                 return DFX_K_FAILURE;
1325                 }
1326
1327         /* Issue START command and bring adapter to LINK_(UN)AVAILABLE state */
1328
1329         bp->cmd_req_virt->cmd_type = PI_CMD_K_START;
1330         if (dfx_hw_dma_cmd_req(bp) != DFX_K_SUCCESS)
1331                 {
1332                 printk("%s: Start command failed\n", bp->dev->name);
1333                 if (get_buffers)
1334                         dfx_rcv_flush(bp);
1335                 return DFX_K_FAILURE;
1336                 }
1337
1338         /* Initialization succeeded, reenable PDQ interrupts */
1339
1340         dfx_port_write_long(bp, PI_PDQ_K_REG_HOST_INT_ENB, PI_HOST_INT_K_ENABLE_DEF_INTS);
1341         return DFX_K_SUCCESS;
1342         }
1343
1344
1345 /*
1346  * ============
1347  * = dfx_open =
1348  * ============
1349  *
1350  * Overview:
1351  *   Opens the adapter
1352  *
1353  * Returns:
1354  *   Condition code
1355  *
1356  * Arguments:
1357  *   dev - pointer to device information
1358  *
1359  * Functional Description:
1360  *   This function brings the adapter to an operational state.
1361  *
1362  * Return Codes:
1363  *   0           - Adapter was successfully opened
1364  *   -EAGAIN - Could not register IRQ or adapter initialization failed
1365  *
1366  * Assumptions:
1367  *   This routine should only be called for a device that was
1368  *   initialized successfully.
1369  *
1370  * Side Effects:
1371  *   Adapter should be in LINK_AVAILABLE or LINK_UNAVAILABLE state
1372  *   if the open is successful.
1373  */
1374
1375 static int dfx_open(struct net_device *dev)
1376 {
1377         DFX_board_t *bp = netdev_priv(dev);
1378         int ret;
1379
1380         DBG_printk("In dfx_open...\n");
1381
1382         /* Register IRQ - support shared interrupts by passing device ptr */
1383
1384         ret = request_irq(dev->irq, dfx_interrupt, IRQF_SHARED, dev->name,
1385                           dev);
1386         if (ret) {
1387                 printk(KERN_ERR "%s: Requested IRQ %d is busy\n", dev->name, dev->irq);
1388                 return ret;
1389         }
1390
1391         /*
1392          * Set current address to factory MAC address
1393          *
1394          * Note: We've already done this step in dfx_driver_init.
1395          *       However, it's possible that a user has set a node
1396          *               address override, then closed and reopened the
1397          *               adapter.  Unless we reset the device address field
1398          *               now, we'll continue to use the existing modified
1399          *               address.
1400          */
1401
1402         memcpy(dev->dev_addr, bp->factory_mac_addr, FDDI_K_ALEN);
1403
1404         /* Clear local unicast/multicast address tables and counts */
1405
1406         memset(bp->uc_table, 0, sizeof(bp->uc_table));
1407         memset(bp->mc_table, 0, sizeof(bp->mc_table));
1408         bp->uc_count = 0;
1409         bp->mc_count = 0;
1410
1411         /* Disable promiscuous filter settings */
1412
1413         bp->ind_group_prom      = PI_FSTATE_K_BLOCK;
1414         bp->group_prom          = PI_FSTATE_K_BLOCK;
1415
1416         spin_lock_init(&bp->lock);
1417
1418         /* Reset and initialize adapter */
1419
1420         bp->reset_type = PI_PDATA_A_RESET_M_SKIP_ST;    /* skip self-test */
1421         if (dfx_adap_init(bp, 1) != DFX_K_SUCCESS)
1422         {
1423                 printk(KERN_ERR "%s: Adapter open failed!\n", dev->name);
1424                 free_irq(dev->irq, dev);
1425                 return -EAGAIN;
1426         }
1427
1428         /* Set device structure info */
1429         netif_start_queue(dev);
1430         return 0;
1431 }
1432
1433
1434 /*
1435  * =============
1436  * = dfx_close =
1437  * =============
1438  *
1439  * Overview:
1440  *   Closes the device/module.
1441  *
1442  * Returns:
1443  *   Condition code
1444  *
1445  * Arguments:
1446  *   dev - pointer to device information
1447  *
1448  * Functional Description:
1449  *   This routine closes the adapter and brings it to a safe state.
1450  *   The interrupt service routine is deregistered with the OS.
1451  *   The adapter can be opened again with another call to dfx_open().
1452  *
1453  * Return Codes:
1454  *   Always return 0.
1455  *
1456  * Assumptions:
1457  *   No further requests for this adapter are made after this routine is
1458  *   called.  dfx_open() can be called to reset and reinitialize the
1459  *   adapter.
1460  *
1461  * Side Effects:
1462  *   Adapter should be in DMA_UNAVAILABLE state upon completion of this
1463  *   routine.
1464  */
1465
1466 static int dfx_close(struct net_device *dev)
1467 {
1468         DFX_board_t *bp = netdev_priv(dev);
1469
1470         DBG_printk("In dfx_close...\n");
1471
1472         /* Disable PDQ interrupts first */
1473
1474         dfx_port_write_long(bp, PI_PDQ_K_REG_HOST_INT_ENB, PI_HOST_INT_K_DISABLE_ALL_INTS);
1475
1476         /* Place adapter in DMA_UNAVAILABLE state by resetting adapter */
1477
1478         (void) dfx_hw_dma_uninit(bp, PI_PDATA_A_RESET_M_SKIP_ST);
1479
1480         /*
1481          * Flush any pending transmit buffers
1482          *
1483          * Note: It's important that we flush the transmit buffers
1484          *               BEFORE we clear our copy of the Type 2 register.
1485          *               Otherwise, we'll have no idea how many buffers
1486          *               we need to free.
1487          */
1488
1489         dfx_xmt_flush(bp);
1490
1491         /*
1492          * Clear Type 1 and Type 2 registers after adapter reset
1493          *
1494          * Note: Even though we're closing the adapter, it's
1495          *       possible that an interrupt will occur after
1496          *               dfx_close is called.  Without some assurance to
1497          *               the contrary we want to make sure that we don't
1498          *               process receive and transmit LLC frames and update
1499          *               the Type 2 register with bad information.
1500          */
1501
1502         bp->cmd_req_reg.lword   = 0;
1503         bp->cmd_rsp_reg.lword   = 0;
1504         bp->rcv_xmt_reg.lword   = 0;
1505
1506         /* Clear consumer block for the same reason given above */
1507
1508         memset(bp->cons_block_virt, 0, sizeof(PI_CONSUMER_BLOCK));
1509
1510         /* Release all dynamically allocate skb in the receive ring. */
1511
1512         dfx_rcv_flush(bp);
1513
1514         /* Clear device structure flags */
1515
1516         netif_stop_queue(dev);
1517
1518         /* Deregister (free) IRQ */
1519
1520         free_irq(dev->irq, dev);
1521
1522         return 0;
1523 }
1524
1525
1526 /*
1527  * ======================
1528  * = dfx_int_pr_halt_id =
1529  * ======================
1530  *
1531  * Overview:
1532  *   Displays halt id's in string form.
1533  *
1534  * Returns:
1535  *   None
1536  *
1537  * Arguments:
1538  *   bp - pointer to board information
1539  *
1540  * Functional Description:
1541  *   Determine current halt id and display appropriate string.
1542  *
1543  * Return Codes:
1544  *   None
1545  *
1546  * Assumptions:
1547  *   None
1548  *
1549  * Side Effects:
1550  *   None
1551  */
1552
1553 static void dfx_int_pr_halt_id(DFX_board_t      *bp)
1554         {
1555         PI_UINT32       port_status;                    /* PDQ port status register value */
1556         PI_UINT32       halt_id;                                /* PDQ port status halt ID */
1557
1558         /* Read the latest port status */
1559
1560         dfx_port_read_long(bp, PI_PDQ_K_REG_PORT_STATUS, &port_status);
1561
1562         /* Display halt state transition information */
1563
1564         halt_id = (port_status & PI_PSTATUS_M_HALT_ID) >> PI_PSTATUS_V_HALT_ID;
1565         switch (halt_id)
1566                 {
1567                 case PI_HALT_ID_K_SELFTEST_TIMEOUT:
1568                         printk("%s: Halt ID: Selftest Timeout\n", bp->dev->name);
1569                         break;
1570
1571                 case PI_HALT_ID_K_PARITY_ERROR:
1572                         printk("%s: Halt ID: Host Bus Parity Error\n", bp->dev->name);
1573                         break;
1574
1575                 case PI_HALT_ID_K_HOST_DIR_HALT:
1576                         printk("%s: Halt ID: Host-Directed Halt\n", bp->dev->name);
1577                         break;
1578
1579                 case PI_HALT_ID_K_SW_FAULT:
1580                         printk("%s: Halt ID: Adapter Software Fault\n", bp->dev->name);
1581                         break;
1582
1583                 case PI_HALT_ID_K_HW_FAULT:
1584                         printk("%s: Halt ID: Adapter Hardware Fault\n", bp->dev->name);
1585                         break;
1586
1587                 case PI_HALT_ID_K_PC_TRACE:
1588                         printk("%s: Halt ID: FDDI Network PC Trace Path Test\n", bp->dev->name);
1589                         break;
1590
1591                 case PI_HALT_ID_K_DMA_ERROR:
1592                         printk("%s: Halt ID: Adapter DMA Error\n", bp->dev->name);
1593                         break;
1594
1595                 case PI_HALT_ID_K_IMAGE_CRC_ERROR:
1596                         printk("%s: Halt ID: Firmware Image CRC Error\n", bp->dev->name);
1597                         break;
1598
1599                 case PI_HALT_ID_K_BUS_EXCEPTION:
1600                         printk("%s: Halt ID: 68000 Bus Exception\n", bp->dev->name);
1601                         break;
1602
1603                 default:
1604                         printk("%s: Halt ID: Unknown (code = %X)\n", bp->dev->name, halt_id);
1605                         break;
1606                 }
1607         }
1608
1609
1610 /*
1611  * ==========================
1612  * = dfx_int_type_0_process =
1613  * ==========================
1614  *
1615  * Overview:
1616  *   Processes Type 0 interrupts.
1617  *
1618  * Returns:
1619  *   None
1620  *
1621  * Arguments:
1622  *   bp - pointer to board information
1623  *
1624  * Functional Description:
1625  *   Processes all enabled Type 0 interrupts.  If the reason for the interrupt
1626  *   is a serious fault on the adapter, then an error message is displayed
1627  *   and the adapter is reset.
1628  *
1629  *   One tricky potential timing window is the rapid succession of "link avail"
1630  *   "link unavail" state change interrupts.  The acknowledgement of the Type 0
1631  *   interrupt must be done before reading the state from the Port Status
1632  *   register.  This is true because a state change could occur after reading
1633  *   the data, but before acknowledging the interrupt.  If this state change
1634  *   does happen, it would be lost because the driver is using the old state,
1635  *   and it will never know about the new state because it subsequently
1636  *   acknowledges the state change interrupt.
1637  *
1638  *          INCORRECT                                      CORRECT
1639  *      read type 0 int reasons                   read type 0 int reasons
1640  *      read adapter state                        ack type 0 interrupts
1641  *      ack type 0 interrupts                     read adapter state
1642  *      ... process interrupt ...                 ... process interrupt ...
1643  *
1644  * Return Codes:
1645  *   None
1646  *
1647  * Assumptions:
1648  *   None
1649  *
1650  * Side Effects:
1651  *   An adapter reset may occur if the adapter has any Type 0 error interrupts
1652  *   or if the port status indicates that the adapter is halted.  The driver
1653  *   is responsible for reinitializing the adapter with the current CAM
1654  *   contents and adapter filter settings.
1655  */
1656
1657 static void dfx_int_type_0_process(DFX_board_t  *bp)
1658
1659         {
1660         PI_UINT32       type_0_status;          /* Host Interrupt Type 0 register */
1661         PI_UINT32       state;                          /* current adap state (from port status) */
1662
1663         /*
1664          * Read host interrupt Type 0 register to determine which Type 0
1665          * interrupts are pending.  Immediately write it back out to clear
1666          * those interrupts.
1667          */
1668
1669         dfx_port_read_long(bp, PI_PDQ_K_REG_TYPE_0_STATUS, &type_0_status);
1670         dfx_port_write_long(bp, PI_PDQ_K_REG_TYPE_0_STATUS, type_0_status);
1671
1672         /* Check for Type 0 error interrupts */
1673
1674         if (type_0_status & (PI_TYPE_0_STAT_M_NXM |
1675                                                         PI_TYPE_0_STAT_M_PM_PAR_ERR |
1676                                                         PI_TYPE_0_STAT_M_BUS_PAR_ERR))
1677                 {
1678                 /* Check for Non-Existent Memory error */
1679
1680                 if (type_0_status & PI_TYPE_0_STAT_M_NXM)
1681                         printk("%s: Non-Existent Memory Access Error\n", bp->dev->name);
1682
1683                 /* Check for Packet Memory Parity error */
1684
1685                 if (type_0_status & PI_TYPE_0_STAT_M_PM_PAR_ERR)
1686                         printk("%s: Packet Memory Parity Error\n", bp->dev->name);
1687
1688                 /* Check for Host Bus Parity error */
1689
1690                 if (type_0_status & PI_TYPE_0_STAT_M_BUS_PAR_ERR)
1691                         printk("%s: Host Bus Parity Error\n", bp->dev->name);
1692
1693                 /* Reset adapter and bring it back on-line */
1694
1695                 bp->link_available = PI_K_FALSE;        /* link is no longer available */
1696                 bp->reset_type = 0;                                     /* rerun on-board diagnostics */
1697                 printk("%s: Resetting adapter...\n", bp->dev->name);
1698                 if (dfx_adap_init(bp, 0) != DFX_K_SUCCESS)
1699                         {
1700                         printk("%s: Adapter reset failed!  Disabling adapter interrupts.\n", bp->dev->name);
1701                         dfx_port_write_long(bp, PI_PDQ_K_REG_HOST_INT_ENB, PI_HOST_INT_K_DISABLE_ALL_INTS);
1702                         return;
1703                         }
1704                 printk("%s: Adapter reset successful!\n", bp->dev->name);
1705                 return;
1706                 }
1707
1708         /* Check for transmit flush interrupt */
1709
1710         if (type_0_status & PI_TYPE_0_STAT_M_XMT_FLUSH)
1711                 {
1712                 /* Flush any pending xmt's and acknowledge the flush interrupt */
1713
1714                 bp->link_available = PI_K_FALSE;                /* link is no longer available */
1715                 dfx_xmt_flush(bp);                                              /* flush any outstanding packets */
1716                 (void) dfx_hw_port_ctrl_req(bp,
1717                                                                         PI_PCTRL_M_XMT_DATA_FLUSH_DONE,
1718                                                                         0,
1719                                                                         0,
1720                                                                         NULL);
1721                 }
1722
1723         /* Check for adapter state change */
1724
1725         if (type_0_status & PI_TYPE_0_STAT_M_STATE_CHANGE)
1726                 {
1727                 /* Get latest adapter state */
1728
1729                 state = dfx_hw_adap_state_rd(bp);       /* get adapter state */
1730                 if (state == PI_STATE_K_HALTED)
1731                         {
1732                         /*
1733                          * Adapter has transitioned to HALTED state, try to reset
1734                          * adapter to bring it back on-line.  If reset fails,
1735                          * leave the adapter in the broken state.
1736                          */
1737
1738                         printk("%s: Controller has transitioned to HALTED state!\n", bp->dev->name);
1739                         dfx_int_pr_halt_id(bp);                 /* display halt id as string */
1740
1741                         /* Reset adapter and bring it back on-line */
1742
1743                         bp->link_available = PI_K_FALSE;        /* link is no longer available */
1744                         bp->reset_type = 0;                                     /* rerun on-board diagnostics */
1745                         printk("%s: Resetting adapter...\n", bp->dev->name);
1746                         if (dfx_adap_init(bp, 0) != DFX_K_SUCCESS)
1747                                 {
1748                                 printk("%s: Adapter reset failed!  Disabling adapter interrupts.\n", bp->dev->name);
1749                                 dfx_port_write_long(bp, PI_PDQ_K_REG_HOST_INT_ENB, PI_HOST_INT_K_DISABLE_ALL_INTS);
1750                                 return;
1751                                 }
1752                         printk("%s: Adapter reset successful!\n", bp->dev->name);
1753                         }
1754                 else if (state == PI_STATE_K_LINK_AVAIL)
1755                         {
1756                         bp->link_available = PI_K_TRUE;         /* set link available flag */
1757                         }
1758                 }
1759         }
1760
1761
1762 /*
1763  * ==================
1764  * = dfx_int_common =
1765  * ==================
1766  *
1767  * Overview:
1768  *   Interrupt service routine (ISR)
1769  *
1770  * Returns:
1771  *   None
1772  *
1773  * Arguments:
1774  *   bp - pointer to board information
1775  *
1776  * Functional Description:
1777  *   This is the ISR which processes incoming adapter interrupts.
1778  *
1779  * Return Codes:
1780  *   None
1781  *
1782  * Assumptions:
1783  *   This routine assumes PDQ interrupts have not been disabled.
1784  *   When interrupts are disabled at the PDQ, the Port Status register
1785  *   is automatically cleared.  This routine uses the Port Status
1786  *   register value to determine whether a Type 0 interrupt occurred,
1787  *   so it's important that adapter interrupts are not normally
1788  *   enabled/disabled at the PDQ.
1789  *
1790  *   It's vital that this routine is NOT reentered for the
1791  *   same board and that the OS is not in another section of
1792  *   code (eg. dfx_xmt_queue_pkt) for the same board on a
1793  *   different thread.
1794  *
1795  * Side Effects:
1796  *   Pending interrupts are serviced.  Depending on the type of
1797  *   interrupt, acknowledging and clearing the interrupt at the
1798  *   PDQ involves writing a register to clear the interrupt bit
1799  *   or updating completion indices.
1800  */
1801
1802 static void dfx_int_common(struct net_device *dev)
1803 {
1804         DFX_board_t *bp = netdev_priv(dev);
1805         PI_UINT32       port_status;            /* Port Status register */
1806
1807         /* Process xmt interrupts - frequent case, so always call this routine */
1808
1809         if(dfx_xmt_done(bp))                            /* free consumed xmt packets */
1810                 netif_wake_queue(dev);
1811
1812         /* Process rcv interrupts - frequent case, so always call this routine */
1813
1814         dfx_rcv_queue_process(bp);              /* service received LLC frames */
1815
1816         /*
1817          * Transmit and receive producer and completion indices are updated on the
1818          * adapter by writing to the Type 2 Producer register.  Since the frequent
1819          * case is that we'll be processing either LLC transmit or receive buffers,
1820          * we'll optimize I/O writes by doing a single register write here.
1821          */
1822
1823         dfx_port_write_long(bp, PI_PDQ_K_REG_TYPE_2_PROD, bp->rcv_xmt_reg.lword);
1824
1825         /* Read PDQ Port Status register to find out which interrupts need processing */
1826
1827         dfx_port_read_long(bp, PI_PDQ_K_REG_PORT_STATUS, &port_status);
1828
1829         /* Process Type 0 interrupts (if any) - infrequent, so only call when needed */
1830
1831         if (port_status & PI_PSTATUS_M_TYPE_0_PENDING)
1832                 dfx_int_type_0_process(bp);     /* process Type 0 interrupts */
1833         }
1834
1835
1836 /*
1837  * =================
1838  * = dfx_interrupt =
1839  * =================
1840  *
1841  * Overview:
1842  *   Interrupt processing routine
1843  *
1844  * Returns:
1845  *   Whether a valid interrupt was seen.
1846  *
1847  * Arguments:
1848  *   irq        - interrupt vector
1849  *   dev_id     - pointer to device information
1850  *
1851  * Functional Description:
1852  *   This routine calls the interrupt processing routine for this adapter.  It
1853  *   disables and reenables adapter interrupts, as appropriate.  We can support
1854  *   shared interrupts since the incoming dev_id pointer provides our device
1855  *   structure context.
1856  *
1857  * Return Codes:
1858  *   IRQ_HANDLED - an IRQ was handled.
1859  *   IRQ_NONE    - no IRQ was handled.
1860  *
1861  * Assumptions:
1862  *   The interrupt acknowledgement at the hardware level (eg. ACKing the PIC
1863  *   on Intel-based systems) is done by the operating system outside this
1864  *   routine.
1865  *
1866  *       System interrupts are enabled through this call.
1867  *
1868  * Side Effects:
1869  *   Interrupts are disabled, then reenabled at the adapter.
1870  */
1871
1872 static irqreturn_t dfx_interrupt(int irq, void *dev_id)
1873 {
1874         struct net_device *dev = dev_id;
1875         DFX_board_t *bp = netdev_priv(dev);
1876         struct device *bdev = bp->bus_dev;
1877         int dfx_bus_pci = dev_is_pci(bdev);
1878         int dfx_bus_eisa = DFX_BUS_EISA(bdev);
1879         int dfx_bus_tc = DFX_BUS_TC(bdev);
1880
1881         /* Service adapter interrupts */
1882
1883         if (dfx_bus_pci) {
1884                 u32 status;
1885
1886                 dfx_port_read_long(bp, PFI_K_REG_STATUS, &status);
1887                 if (!(status & PFI_STATUS_M_PDQ_INT))
1888                         return IRQ_NONE;
1889
1890                 spin_lock(&bp->lock);
1891
1892                 /* Disable PDQ-PFI interrupts at PFI */
1893                 dfx_port_write_long(bp, PFI_K_REG_MODE_CTRL,
1894                                     PFI_MODE_M_DMA_ENB);
1895
1896                 /* Call interrupt service routine for this adapter */
1897                 dfx_int_common(dev);
1898
1899                 /* Clear PDQ interrupt status bit and reenable interrupts */
1900                 dfx_port_write_long(bp, PFI_K_REG_STATUS,
1901                                     PFI_STATUS_M_PDQ_INT);
1902                 dfx_port_write_long(bp, PFI_K_REG_MODE_CTRL,
1903                                     (PFI_MODE_M_PDQ_INT_ENB |
1904                                      PFI_MODE_M_DMA_ENB));
1905
1906                 spin_unlock(&bp->lock);
1907         }
1908         if (dfx_bus_eisa) {
1909                 unsigned long base_addr = to_eisa_device(bdev)->base_addr;
1910                 u8 status;
1911
1912                 status = inb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0);
1913                 if (!(status & PI_CONFIG_STAT_0_M_PEND))
1914                         return IRQ_NONE;
1915
1916                 spin_lock(&bp->lock);
1917
1918                 /* Disable interrupts at the ESIC */
1919                 status &= ~PI_CONFIG_STAT_0_M_INT_ENB;
1920                 outb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0, status);
1921
1922                 /* Call interrupt service routine for this adapter */
1923                 dfx_int_common(dev);
1924
1925                 /* Reenable interrupts at the ESIC */
1926                 status = inb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0);
1927                 status |= PI_CONFIG_STAT_0_M_INT_ENB;
1928                 outb(base_addr + PI_ESIC_K_IO_CONFIG_STAT_0, status);
1929
1930                 spin_unlock(&bp->lock);
1931         }
1932         if (dfx_bus_tc) {
1933                 u32 status;
1934
1935                 dfx_port_read_long(bp, PI_PDQ_K_REG_PORT_STATUS, &status);
1936                 if (!(status & (PI_PSTATUS_M_RCV_DATA_PENDING |
1937                                 PI_PSTATUS_M_XMT_DATA_PENDING |
1938                                 PI_PSTATUS_M_SMT_HOST_PENDING |
1939                                 PI_PSTATUS_M_UNSOL_PENDING |
1940                                 PI_PSTATUS_M_CMD_RSP_PENDING |
1941                                 PI_PSTATUS_M_CMD_REQ_PENDING |
1942                                 PI_PSTATUS_M_TYPE_0_PENDING)))
1943                         return IRQ_NONE;
1944
1945                 spin_lock(&bp->lock);
1946
1947                 /* Call interrupt service routine for this adapter */
1948                 dfx_int_common(dev);
1949
1950                 spin_unlock(&bp->lock);
1951         }
1952
1953         return IRQ_HANDLED;
1954 }
1955
1956
1957 /*
1958  * =====================
1959  * = dfx_ctl_get_stats =
1960  * =====================
1961  *
1962  * Overview:
1963  *   Get statistics for FDDI adapter
1964  *
1965  * Returns:
1966  *   Pointer to FDDI statistics structure
1967  *
1968  * Arguments:
1969  *   dev - pointer to device information
1970  *
1971  * Functional Description:
1972  *   Gets current MIB objects from adapter, then
1973  *   returns FDDI statistics structure as defined
1974  *   in if_fddi.h.
1975  *
1976  *   Note: Since the FDDI statistics structure is
1977  *   still new and the device structure doesn't
1978  *   have an FDDI-specific get statistics handler,
1979  *   we'll return the FDDI statistics structure as
1980  *   a pointer to an Ethernet statistics structure.
1981  *   That way, at least the first part of the statistics
1982  *   structure can be decoded properly, and it allows
1983  *   "smart" applications to perform a second cast to
1984  *   decode the FDDI-specific statistics.
1985  *
1986  *   We'll have to pay attention to this routine as the
1987  *   device structure becomes more mature and LAN media
1988  *   independent.
1989  *
1990  * Return Codes:
1991  *   None
1992  *
1993  * Assumptions:
1994  *   None
1995  *
1996  * Side Effects:
1997  *   None
1998  */
1999
2000 static struct net_device_stats *dfx_ctl_get_stats(struct net_device *dev)
2001         {
2002         DFX_board_t *bp = netdev_priv(dev);
2003
2004         /* Fill the bp->stats structure with driver-maintained counters */
2005
2006         bp->stats.gen.rx_packets = bp->rcv_total_frames;
2007         bp->stats.gen.tx_packets = bp->xmt_total_frames;
2008         bp->stats.gen.rx_bytes   = bp->rcv_total_bytes;
2009         bp->stats.gen.tx_bytes   = bp->xmt_total_bytes;
2010         bp->stats.gen.rx_errors  = bp->rcv_crc_errors +
2011                                    bp->rcv_frame_status_errors +
2012                                    bp->rcv_length_errors;
2013         bp->stats.gen.tx_errors  = bp->xmt_length_errors;
2014         bp->stats.gen.rx_dropped = bp->rcv_discards;
2015         bp->stats.gen.tx_dropped = bp->xmt_discards;
2016         bp->stats.gen.multicast  = bp->rcv_multicast_frames;
2017         bp->stats.gen.collisions = 0;           /* always zero (0) for FDDI */
2018
2019         /* Get FDDI SMT MIB objects */
2020
2021         bp->cmd_req_virt->cmd_type = PI_CMD_K_SMT_MIB_GET;
2022         if (dfx_hw_dma_cmd_req(bp) != DFX_K_SUCCESS)
2023                 return (struct net_device_stats *)&bp->stats;
2024
2025         /* Fill the bp->stats structure with the SMT MIB object values */
2026
2027         memcpy(bp->stats.smt_station_id, &bp->cmd_rsp_virt->smt_mib_get.smt_station_id, sizeof(bp->cmd_rsp_virt->smt_mib_get.smt_station_id));
2028         bp->stats.smt_op_version_id                                     = bp->cmd_rsp_virt->smt_mib_get.smt_op_version_id;
2029         bp->stats.smt_hi_version_id                                     = bp->cmd_rsp_virt->smt_mib_get.smt_hi_version_id;
2030         bp->stats.smt_lo_version_id                                     = bp->cmd_rsp_virt->smt_mib_get.smt_lo_version_id;
2031         memcpy(bp->stats.smt_user_data, &bp->cmd_rsp_virt->smt_mib_get.smt_user_data, sizeof(bp->cmd_rsp_virt->smt_mib_get.smt_user_data));
2032         bp->stats.smt_mib_version_id                            = bp->cmd_rsp_virt->smt_mib_get.smt_mib_version_id;
2033         bp->stats.smt_mac_cts                                           = bp->cmd_rsp_virt->smt_mib_get.smt_mac_ct;
2034         bp->stats.smt_non_master_cts                            = bp->cmd_rsp_virt->smt_mib_get.smt_non_master_ct;
2035         bp->stats.smt_master_cts                                        = bp->cmd_rsp_virt->smt_mib_get.smt_master_ct;
2036         bp->stats.smt_available_paths                           = bp->cmd_rsp_virt->smt_mib_get.smt_available_paths;
2037         bp->stats.smt_config_capabilities                       = bp->cmd_rsp_virt->smt_mib_get.smt_config_capabilities;
2038         bp->stats.smt_config_policy                                     = bp->cmd_rsp_virt->smt_mib_get.smt_config_policy;
2039         bp->stats.smt_connection_policy                         = bp->cmd_rsp_virt->smt_mib_get.smt_connection_policy;
2040         bp->stats.smt_t_notify                                          = bp->cmd_rsp_virt->smt_mib_get.smt_t_notify;
2041         bp->stats.smt_stat_rpt_policy                           = bp->cmd_rsp_virt->smt_mib_get.smt_stat_rpt_policy;
2042         bp->stats.smt_trace_max_expiration                      = bp->cmd_rsp_virt->smt_mib_get.smt_trace_max_expiration;
2043         bp->stats.smt_bypass_present                            = bp->cmd_rsp_virt->smt_mib_get.smt_bypass_present;
2044         bp->stats.smt_ecm_state                                         = bp->cmd_rsp_virt->smt_mib_get.smt_ecm_state;
2045         bp->stats.smt_cf_state                                          = bp->cmd_rsp_virt->smt_mib_get.smt_cf_state;
2046         bp->stats.smt_remote_disconnect_flag            = bp->cmd_rsp_virt->smt_mib_get.smt_remote_disconnect_flag;
2047         bp->stats.smt_station_status                            = bp->cmd_rsp_virt->smt_mib_get.smt_station_status;
2048         bp->stats.smt_peer_wrap_flag                            = bp->cmd_rsp_virt->smt_mib_get.smt_peer_wrap_flag;
2049         bp->stats.smt_time_stamp                                        = bp->cmd_rsp_virt->smt_mib_get.smt_msg_time_stamp.ls;
2050         bp->stats.smt_transition_time_stamp                     = bp->cmd_rsp_virt->smt_mib_get.smt_transition_time_stamp.ls;
2051         bp->stats.mac_frame_status_functions            = bp->cmd_rsp_virt->smt_mib_get.mac_frame_status_functions;
2052         bp->stats.mac_t_max_capability                          = bp->cmd_rsp_virt->smt_mib_get.mac_t_max_capability;
2053         bp->stats.mac_tvx_capability                            = bp->cmd_rsp_virt->smt_mib_get.mac_tvx_capability;
2054         bp->stats.mac_available_paths                           = bp->cmd_rsp_virt->smt_mib_get.mac_available_paths;
2055         bp->stats.mac_current_path                                      = bp->cmd_rsp_virt->smt_mib_get.mac_current_path;
2056         memcpy(bp->stats.mac_upstream_nbr, &bp->cmd_rsp_virt->smt_mib_get.mac_upstream_nbr, FDDI_K_ALEN);
2057         memcpy(bp->stats.mac_downstream_nbr, &bp->cmd_rsp_virt->smt_mib_get.mac_downstream_nbr, FDDI_K_ALEN);
2058         memcpy(bp->stats.mac_old_upstream_nbr, &bp->cmd_rsp_virt->smt_mib_get.mac_old_upstream_nbr, FDDI_K_ALEN);
2059         memcpy(bp->stats.mac_old_downstream_nbr, &bp->cmd_rsp_virt->smt_mib_get.mac_old_downstream_nbr, FDDI_K_ALEN);
2060         bp->stats.mac_dup_address_test                          = bp->cmd_rsp_virt->smt_mib_get.mac_dup_address_test;
2061         bp->stats.mac_requested_paths                           = bp->cmd_rsp_virt->smt_mib_get.mac_requested_paths;
2062         bp->stats.mac_downstream_port_type                      = bp->cmd_rsp_virt->smt_mib_get.mac_downstream_port_type;
2063         memcpy(bp->stats.mac_smt_address, &bp->cmd_rsp_virt->smt_mib_get.mac_smt_address, FDDI_K_ALEN);
2064         bp->stats.mac_t_req                                                     = bp->cmd_rsp_virt->smt_mib_get.mac_t_req;
2065         bp->stats.mac_t_neg                                                     = bp->cmd_rsp_virt->smt_mib_get.mac_t_neg;
2066         bp->stats.mac_t_max                                                     = bp->cmd_rsp_virt->smt_mib_get.mac_t_max;
2067         bp->stats.mac_tvx_value                                         = bp->cmd_rsp_virt->smt_mib_get.mac_tvx_value;
2068         bp->stats.mac_frame_error_threshold                     = bp->cmd_rsp_virt->smt_mib_get.mac_frame_error_threshold;
2069         bp->stats.mac_frame_error_ratio                         = bp->cmd_rsp_virt->smt_mib_get.mac_frame_error_ratio;
2070         bp->stats.mac_rmt_state                                         = bp->cmd_rsp_virt->smt_mib_get.mac_rmt_state;
2071         bp->stats.mac_da_flag                                           = bp->cmd_rsp_virt->smt_mib_get.mac_da_flag;
2072         bp->stats.mac_una_da_flag                                       = bp->cmd_rsp_virt->smt_mib_get.mac_unda_flag;
2073         bp->stats.mac_frame_error_flag                          = bp->cmd_rsp_virt->smt_mib_get.mac_frame_error_flag;
2074         bp->stats.mac_ma_unitdata_available                     = bp->cmd_rsp_virt->smt_mib_get.mac_ma_unitdata_available;
2075         bp->stats.mac_hardware_present                          = bp->cmd_rsp_virt->smt_mib_get.mac_hardware_present;
2076         bp->stats.mac_ma_unitdata_enable                        = bp->cmd_rsp_virt->smt_mib_get.mac_ma_unitdata_enable;
2077         bp->stats.path_tvx_lower_bound                          = bp->cmd_rsp_virt->smt_mib_get.path_tvx_lower_bound;
2078         bp->stats.path_t_max_lower_bound                        = bp->cmd_rsp_virt->smt_mib_get.path_t_max_lower_bound;
2079         bp->stats.path_max_t_req                                        = bp->cmd_rsp_virt->smt_mib_get.path_max_t_req;
2080         memcpy(bp->stats.path_configuration, &bp->cmd_rsp_virt->smt_mib_get.path_configuration, sizeof(bp->cmd_rsp_virt->smt_mib_get.path_configuration));
2081         bp->stats.port_my_type[0]                                       = bp->cmd_rsp_virt->smt_mib_get.port_my_type[0];
2082         bp->stats.port_my_type[1]                                       = bp->cmd_rsp_virt->smt_mib_get.port_my_type[1];
2083         bp->stats.port_neighbor_type[0]                         = bp->cmd_rsp_virt->smt_mib_get.port_neighbor_type[0];
2084         bp->stats.port_neighbor_type[1]                         = bp->cmd_rsp_virt->smt_mib_get.port_neighbor_type[1];
2085         bp->stats.port_connection_policies[0]           = bp->cmd_rsp_virt->smt_mib_get.port_connection_policies[0];
2086         bp->stats.port_connection_policies[1]           = bp->cmd_rsp_virt->smt_mib_get.port_connection_policies[1];
2087         bp->stats.port_mac_indicated[0]                         = bp->cmd_rsp_virt->smt_mib_get.port_mac_indicated[0];
2088         bp->stats.port_mac_indicated[1]                         = bp->cmd_rsp_virt->smt_mib_get.port_mac_indicated[1];
2089         bp->stats.port_current_path[0]                          = bp->cmd_rsp_virt->smt_mib_get.port_current_path[0];
2090         bp->stats.port_current_path[1]                          = bp->cmd_rsp_virt->smt_mib_get.port_current_path[1];
2091         memcpy(&bp->stats.port_requested_paths[0*3], &bp->cmd_rsp_virt->smt_mib_get.port_requested_paths[0], 3);
2092         memcpy(&bp->stats.port_requested_paths[1*3], &bp->cmd_rsp_virt->smt_mib_get.port_requested_paths[1], 3);
2093         bp->stats.port_mac_placement[0]                         = bp->cmd_rsp_virt->smt_mib_get.port_mac_placement[0];
2094         bp->stats.port_mac_placement[1]                         = bp->cmd_rsp_virt->smt_mib_get.port_mac_placement[1];
2095         bp->stats.port_available_paths[0]                       = bp->cmd_rsp_virt->smt_mib_get.port_available_paths[0];
2096         bp->stats.port_available_paths[1]                       = bp->cmd_rsp_virt->smt_mib_get.port_available_paths[1];
2097         bp->stats.port_pmd_class[0]                                     = bp->cmd_rsp_virt->smt_mib_get.port_pmd_class[0];
2098         bp->stats.port_pmd_class[1]                                     = bp->cmd_rsp_virt->smt_mib_get.port_pmd_class[1];
2099         bp->stats.port_connection_capabilities[0]       = bp->cmd_rsp_virt->smt_mib_get.port_connection_capabilities[0];
2100         bp->stats.port_connection_capabilities[1]       = bp->cmd_rsp_virt->smt_mib_get.port_connection_capabilities[1];
2101         bp->stats.port_bs_flag[0]                                       = bp->cmd_rsp_virt->smt_mib_get.port_bs_flag[0];
2102         bp->stats.port_bs_flag[1]                                       = bp->cmd_rsp_virt->smt_mib_get.port_bs_flag[1];
2103         bp->stats.port_ler_estimate[0]                          = bp->cmd_rsp_virt->smt_mib_get.port_ler_estimate[0];
2104         bp->stats.port_ler_estimate[1]                          = bp->cmd_rsp_virt->smt_mib_get.port_ler_estimate[1];
2105         bp->stats.port_ler_cutoff[0]                            = bp->cmd_rsp_virt->smt_mib_get.port_ler_cutoff[0];
2106         bp->stats.port_ler_cutoff[1]                            = bp->cmd_rsp_virt->smt_mib_get.port_ler_cutoff[1];
2107         bp->stats.port_ler_alarm[0]                                     = bp->cmd_rsp_virt->smt_mib_get.port_ler_alarm[0];
2108         bp->stats.port_ler_alarm[1]                                     = bp->cmd_rsp_virt->smt_mib_get.port_ler_alarm[1];
2109         bp->stats.port_connect_state[0]                         = bp->cmd_rsp_virt->smt_mib_get.port_connect_state[0];
2110         bp->stats.port_connect_state[1]                         = bp->cmd_rsp_virt->smt_mib_get.port_connect_state[1];
2111         bp->stats.port_pcm_state[0]                                     = bp->cmd_rsp_virt->smt_mib_get.port_pcm_state[0];
2112         bp->stats.port_pcm_state[1]                                     = bp->cmd_rsp_virt->smt_mib_get.port_pcm_state[1];
2113         bp->stats.port_pc_withhold[0]                           = bp->cmd_rsp_virt->smt_mib_get.port_pc_withhold[0];
2114         bp->stats.port_pc_withhold[1]                           = bp->cmd_rsp_virt->smt_mib_get.port_pc_withhold[1];
2115         bp->stats.port_ler_flag[0]                                      = bp->cmd_rsp_virt->smt_mib_get.port_ler_flag[0];
2116         bp->stats.port_ler_flag[1]                                      = bp->cmd_rsp_virt->smt_mib_get.port_ler_flag[1];
2117         bp->stats.port_hardware_present[0]                      = bp->cmd_rsp_virt->smt_mib_get.port_hardware_present[0];
2118         bp->stats.port_hardware_present[1]                      = bp->cmd_rsp_virt->smt_mib_get.port_hardware_present[1];
2119
2120         /* Get FDDI counters */
2121
2122         bp->cmd_req_virt->cmd_type = PI_CMD_K_CNTRS_GET;
2123         if (dfx_hw_dma_cmd_req(bp) != DFX_K_SUCCESS)
2124                 return (struct net_device_stats *)&bp->stats;
2125
2126         /* Fill the bp->stats structure with the FDDI counter values */
2127
2128         bp->stats.mac_frame_cts                         = bp->cmd_rsp_virt->cntrs_get.cntrs.frame_cnt.ls;
2129         bp->stats.mac_copied_cts                        = bp->cmd_rsp_virt->cntrs_get.cntrs.copied_cnt.ls;
2130         bp->stats.mac_transmit_cts                      = bp->cmd_rsp_virt->cntrs_get.cntrs.transmit_cnt.ls;
2131         bp->stats.mac_error_cts                         = bp->cmd_rsp_virt->cntrs_get.cntrs.error_cnt.ls;
2132         bp->stats.mac_lost_cts                          = bp->cmd_rsp_virt->cntrs_get.cntrs.lost_cnt.ls;
2133         bp->stats.port_lct_fail_cts[0]          = bp->cmd_rsp_virt->cntrs_get.cntrs.lct_rejects[0].ls;
2134         bp->stats.port_lct_fail_cts[1]          = bp->cmd_rsp_virt->cntrs_get.cntrs.lct_rejects[1].ls;
2135         bp->stats.port_lem_reject_cts[0]        = bp->cmd_rsp_virt->cntrs_get.cntrs.lem_rejects[0].ls;
2136         bp->stats.port_lem_reject_cts[1]        = bp->cmd_rsp_virt->cntrs_get.cntrs.lem_rejects[1].ls;
2137         bp->stats.port_lem_cts[0]                       = bp->cmd_rsp_virt->cntrs_get.cntrs.link_errors[0].ls;
2138         bp->stats.port_lem_cts[1]                       = bp->cmd_rsp_virt->cntrs_get.cntrs.link_errors[1].ls;
2139
2140         return (struct net_device_stats *)&bp->stats;
2141         }
2142
2143
2144 /*
2145  * ==============================
2146  * = dfx_ctl_set_multicast_list =
2147  * ==============================
2148  *
2149  * Overview:
2150  *   Enable/Disable LLC frame promiscuous mode reception
2151  *   on the adapter and/or update multicast address table.
2152  *
2153  * Returns:
2154  *   None
2155  *
2156  * Arguments:
2157  *   dev - pointer to device information
2158  *
2159  * Functional Description:
2160  *   This routine follows a fairly simple algorithm for setting the
2161  *   adapter filters and CAM:
2162  *
2163  *              if IFF_PROMISC flag is set
2164  *                      enable LLC individual/group promiscuous mode
2165  *              else
2166  *                      disable LLC individual/group promiscuous mode
2167  *                      if number of incoming multicast addresses >
2168  *                                      (CAM max size - number of unicast addresses in CAM)
2169  *                              enable LLC group promiscuous mode
2170  *                              set driver-maintained multicast address count to zero
2171  *                      else
2172  *                              disable LLC group promiscuous mode
2173  *                              set driver-maintained multicast address count to incoming count
2174  *                      update adapter CAM
2175  *              update adapter filters
2176  *
2177  * Return Codes:
2178  *   None
2179  *
2180  * Assumptions:
2181  *   Multicast addresses are presented in canonical (LSB) format.
2182  *
2183  * Side Effects:
2184  *   On-board adapter CAM and filters are updated.
2185  */
2186
2187 static void dfx_ctl_set_multicast_list(struct net_device *dev)
2188 {
2189         DFX_board_t *bp = netdev_priv(dev);
2190         int                                     i;                      /* used as index in for loop */
2191         struct netdev_hw_addr *ha;
2192
2193         /* Enable LLC frame promiscuous mode, if necessary */
2194
2195         if (dev->flags & IFF_PROMISC)
2196                 bp->ind_group_prom = PI_FSTATE_K_PASS;          /* Enable LLC ind/group prom mode */
2197
2198         /* Else, update multicast address table */
2199
2200         else
2201                 {
2202                 bp->ind_group_prom = PI_FSTATE_K_BLOCK;         /* Disable LLC ind/group prom mode */
2203                 /*
2204                  * Check whether incoming multicast address count exceeds table size
2205                  *
2206                  * Note: The adapters utilize an on-board 64 entry CAM for
2207                  *       supporting perfect filtering of multicast packets
2208                  *               and bridge functions when adding unicast addresses.
2209                  *               There is no hash function available.  To support
2210                  *               additional multicast addresses, the all multicast
2211                  *               filter (LLC group promiscuous mode) must be enabled.
2212                  *
2213                  *               The firmware reserves two CAM entries for SMT-related
2214                  *               multicast addresses, which leaves 62 entries available.
2215                  *               The following code ensures that we're not being asked
2216                  *               to add more than 62 addresses to the CAM.  If we are,
2217                  *               the driver will enable the all multicast filter.
2218                  *               Should the number of multicast addresses drop below
2219                  *               the high water mark, the filter will be disabled and
2220                  *               perfect filtering will be used.
2221                  */
2222
2223                 if (netdev_mc_count(dev) > (PI_CMD_ADDR_FILTER_K_SIZE - bp->uc_count))
2224                         {
2225                         bp->group_prom  = PI_FSTATE_K_PASS;             /* Enable LLC group prom mode */
2226                         bp->mc_count    = 0;                                    /* Don't add mc addrs to CAM */
2227                         }
2228                 else
2229                         {
2230                         bp->group_prom  = PI_FSTATE_K_BLOCK;    /* Disable LLC group prom mode */
2231                         bp->mc_count    = netdev_mc_count(dev);         /* Add mc addrs to CAM */
2232                         }
2233
2234                 /* Copy addresses to multicast address table, then update adapter CAM */
2235
2236                 i = 0;
2237                 netdev_for_each_mc_addr(ha, dev)
2238                         memcpy(&bp->mc_table[i++ * FDDI_K_ALEN],
2239                                ha->addr, FDDI_K_ALEN);
2240
2241                 if (dfx_ctl_update_cam(bp) != DFX_K_SUCCESS)
2242                         {
2243                         DBG_printk("%s: Could not update multicast address table!\n", dev->name);
2244                         }
2245                 else
2246                         {
2247                         DBG_printk("%s: Multicast address table updated!  Added %d addresses.\n", dev->name, bp->mc_count);
2248                         }
2249                 }
2250
2251         /* Update adapter filters */
2252
2253         if (dfx_ctl_update_filters(bp) != DFX_K_SUCCESS)
2254                 {
2255                 DBG_printk("%s: Could not update adapter filters!\n", dev->name);
2256                 }
2257         else
2258                 {
2259                 DBG_printk("%s: Adapter filters updated!\n", dev->name);
2260                 }
2261         }
2262
2263
2264 /*
2265  * ===========================
2266  * = dfx_ctl_set_mac_address =
2267  * ===========================
2268  *
2269  * Overview:
2270  *   Add node address override (unicast address) to adapter
2271  *   CAM and update dev_addr field in device table.
2272  *
2273  * Returns:
2274  *   None
2275  *
2276  * Arguments:
2277  *   dev  - pointer to device information
2278  *   addr - pointer to sockaddr structure containing unicast address to add
2279  *
2280  * Functional Description:
2281  *   The adapter supports node address overrides by adding one or more
2282  *   unicast addresses to the adapter CAM.  This is similar to adding
2283  *   multicast addresses.  In this routine we'll update the driver and
2284  *   device structures with the new address, then update the adapter CAM
2285  *   to ensure that the adapter will copy and strip frames destined and
2286  *   sourced by that address.
2287  *
2288  * Return Codes:
2289  *   Always returns zero.
2290  *
2291  * Assumptions:
2292  *   The address pointed to by addr->sa_data is a valid unicast
2293  *   address and is presented in canonical (LSB) format.
2294  *
2295  * Side Effects:
2296  *   On-board adapter CAM is updated.  On-board adapter filters
2297  *   may be updated.
2298  */
2299
2300 static int dfx_ctl_set_mac_address(struct net_device *dev, void *addr)
2301         {
2302         struct sockaddr *p_sockaddr = (struct sockaddr *)addr;
2303         DFX_board_t *bp = netdev_priv(dev);
2304
2305         /* Copy unicast address to driver-maintained structs and update count */
2306
2307         memcpy(dev->dev_addr, p_sockaddr->sa_data, FDDI_K_ALEN);        /* update device struct */
2308         memcpy(&bp->uc_table[0], p_sockaddr->sa_data, FDDI_K_ALEN);     /* update driver struct */
2309         bp->uc_count = 1;
2310
2311         /*
2312          * Verify we're not exceeding the CAM size by adding unicast address
2313          *
2314          * Note: It's possible that before entering this routine we've
2315          *       already filled the CAM with 62 multicast addresses.
2316          *               Since we need to place the node address override into
2317          *               the CAM, we have to check to see that we're not
2318          *               exceeding the CAM size.  If we are, we have to enable
2319          *               the LLC group (multicast) promiscuous mode filter as
2320          *               in dfx_ctl_set_multicast_list.
2321          */
2322
2323         if ((bp->uc_count + bp->mc_count) > PI_CMD_ADDR_FILTER_K_SIZE)
2324                 {
2325                 bp->group_prom  = PI_FSTATE_K_PASS;             /* Enable LLC group prom mode */
2326                 bp->mc_count    = 0;                                    /* Don't add mc addrs to CAM */
2327
2328                 /* Update adapter filters */
2329
2330                 if (dfx_ctl_update_filters(bp) != DFX_K_SUCCESS)
2331                         {
2332                         DBG_printk("%s: Could not update adapter filters!\n", dev->name);
2333                         }
2334                 else
2335                         {
2336                         DBG_printk("%s: Adapter filters updated!\n", dev->name);
2337                         }
2338                 }
2339
2340         /* Update adapter CAM with new unicast address */
2341
2342         if (dfx_ctl_update_cam(bp) != DFX_K_SUCCESS)
2343                 {
2344                 DBG_printk("%s: Could not set new MAC address!\n", dev->name);
2345                 }
2346         else
2347                 {
2348                 DBG_printk("%s: Adapter CAM updated with new MAC address\n", dev->name);
2349                 }
2350         return 0;                       /* always return zero */
2351         }
2352
2353
2354 /*
2355  * ======================
2356  * = dfx_ctl_update_cam =
2357  * ======================
2358  *
2359  * Overview:
2360  *   Procedure to update adapter CAM (Content Addressable Memory)
2361  *   with desired unicast and multicast address entries.
2362  *
2363  * Returns:
2364  *   Condition code
2365  *
2366  * Arguments:
2367  *   bp - pointer to board information
2368  *
2369  * Functional Description:
2370  *   Updates adapter CAM with current contents of board structure
2371  *   unicast and multicast address tables.  Since there are only 62
2372  *   free entries in CAM, this routine ensures that the command
2373  *   request buffer is not overrun.
2374  *
2375  * Return Codes:
2376  *   DFX_K_SUCCESS - Request succeeded
2377  *   DFX_K_FAILURE - Request failed
2378  *
2379  * Assumptions:
2380  *   All addresses being added (unicast and multicast) are in canonical
2381  *   order.
2382  *
2383  * Side Effects:
2384  *   On-board adapter CAM is updated.
2385  */
2386
2387 static int dfx_ctl_update_cam(DFX_board_t *bp)
2388         {
2389         int                     i;                              /* used as index */
2390         PI_LAN_ADDR     *p_addr;                /* pointer to CAM entry */
2391
2392         /*
2393          * Fill in command request information
2394          *
2395          * Note: Even though both the unicast and multicast address
2396          *       table entries are stored as contiguous 6 byte entries,
2397          *               the firmware address filter set command expects each
2398          *               entry to be two longwords (8 bytes total).  We must be
2399          *               careful to only copy the six bytes of each unicast and
2400          *               multicast table entry into each command entry.  This
2401          *               is also why we must first clear the entire command
2402          *               request buffer.
2403          */
2404
2405         memset(bp->cmd_req_virt, 0, PI_CMD_REQ_K_SIZE_MAX);     /* first clear buffer */
2406         bp->cmd_req_virt->cmd_type = PI_CMD_K_ADDR_FILTER_SET;
2407         p_addr = &bp->cmd_req_virt->addr_filter_set.entry[0];
2408
2409         /* Now add unicast addresses to command request buffer, if any */
2410
2411         for (i=0; i < (int)bp->uc_count; i++)
2412                 {
2413                 if (i < PI_CMD_ADDR_FILTER_K_SIZE)
2414                         {
2415                         memcpy(p_addr, &bp->uc_table[i*FDDI_K_ALEN], FDDI_K_ALEN);
2416                         p_addr++;                       /* point to next command entry */
2417                         }
2418                 }
2419
2420         /* Now add multicast addresses to command request buffer, if any */
2421
2422         for (i=0; i < (int)bp->mc_count; i++)
2423                 {
2424                 if ((i + bp->uc_count) < PI_CMD_ADDR_FILTER_K_SIZE)
2425                         {
2426                         memcpy(p_addr, &bp->mc_table[i*FDDI_K_ALEN], FDDI_K_ALEN);
2427                         p_addr++;                       /* point to next command entry */
2428                         }
2429                 }
2430
2431         /* Issue command to update adapter CAM, then return */
2432
2433         if (dfx_hw_dma_cmd_req(bp) != DFX_K_SUCCESS)
2434                 return DFX_K_FAILURE;
2435         return DFX_K_SUCCESS;
2436         }
2437
2438
2439 /*
2440  * ==========================
2441  * = dfx_ctl_update_filters =
2442  * ==========================
2443  *
2444  * Overview:
2445  *   Procedure to update adapter filters with desired
2446  *   filter settings.
2447  *
2448  * Returns:
2449  *   Condition code
2450  *
2451  * Arguments:
2452  *   bp - pointer to board information
2453  *
2454  * Functional Description:
2455  *   Enables or disables filter using current filter settings.
2456  *
2457  * Return Codes:
2458  *   DFX_K_SUCCESS - Request succeeded.
2459  *   DFX_K_FAILURE - Request failed.
2460  *
2461  * Assumptions:
2462  *   We must always pass up packets destined to the broadcast
2463  *   address (FF-FF-FF-FF-FF-FF), so we'll always keep the
2464  *   broadcast filter enabled.
2465  *
2466  * Side Effects:
2467  *   On-board adapter filters are updated.
2468  */
2469
2470 static int dfx_ctl_update_filters(DFX_board_t *bp)
2471         {
2472         int     i = 0;                                  /* used as index */
2473
2474         /* Fill in command request information */
2475
2476         bp->cmd_req_virt->cmd_type = PI_CMD_K_FILTERS_SET;
2477
2478         /* Initialize Broadcast filter - * ALWAYS ENABLED * */
2479
2480         bp->cmd_req_virt->filter_set.item[i].item_code  = PI_ITEM_K_BROADCAST;
2481         bp->cmd_req_virt->filter_set.item[i++].value    = PI_FSTATE_K_PASS;
2482
2483         /* Initialize LLC Individual/Group Promiscuous filter */
2484
2485         bp->cmd_req_virt->filter_set.item[i].item_code  = PI_ITEM_K_IND_GROUP_PROM;
2486         bp->cmd_req_virt->filter_set.item[i++].value    = bp->ind_group_prom;
2487
2488         /* Initialize LLC Group Promiscuous filter */
2489
2490         bp->cmd_req_virt->filter_set.item[i].item_code  = PI_ITEM_K_GROUP_PROM;
2491         bp->cmd_req_virt->filter_set.item[i++].value    = bp->group_prom;
2492
2493         /* Terminate the item code list */
2494
2495         bp->cmd_req_virt->filter_set.item[i].item_code  = PI_ITEM_K_EOL;
2496
2497         /* Issue command to update adapter filters, then return */
2498
2499         if (dfx_hw_dma_cmd_req(bp) != DFX_K_SUCCESS)
2500                 return DFX_K_FAILURE;
2501         return DFX_K_SUCCESS;
2502         }
2503
2504
2505 /*
2506  * ======================
2507  * = dfx_hw_dma_cmd_req =
2508  * ======================
2509  *
2510  * Overview:
2511  *   Sends PDQ DMA command to adapter firmware
2512  *
2513  * Returns:
2514  *   Condition code
2515  *
2516  * Arguments:
2517  *   bp - pointer to board information
2518  *
2519  * Functional Description:
2520  *   The command request and response buffers are posted to the adapter in the manner
2521  *   described in the PDQ Port Specification:
2522  *
2523  *              1. Command Response Buffer is posted to adapter.
2524  *              2. Command Request Buffer is posted to adapter.
2525  *              3. Command Request consumer index is polled until it indicates that request
2526  *         buffer has been DMA'd to adapter.
2527  *              4. Command Response consumer index is polled until it indicates that response
2528  *         buffer has been DMA'd from adapter.
2529  *
2530  *   This ordering ensures that a response buffer is already available for the firmware
2531  *   to use once it's done processing the request buffer.
2532  *
2533  * Return Codes:
2534  *   DFX_K_SUCCESS        - DMA command succeeded
2535  *       DFX_K_OUTSTATE   - Adapter is NOT in proper state
2536  *   DFX_K_HW_TIMEOUT - DMA command timed out
2537  *
2538  * Assumptions:
2539  *   Command request buffer has already been filled with desired DMA command.
2540  *
2541  * Side Effects:
2542  *   None
2543  */
2544
2545 static int dfx_hw_dma_cmd_req(DFX_board_t *bp)
2546         {
2547         int status;                     /* adapter status */
2548         int timeout_cnt;        /* used in for loops */
2549
2550         /* Make sure the adapter is in a state that we can issue the DMA command in */
2551
2552         status = dfx_hw_adap_state_rd(bp);
2553         if ((status == PI_STATE_K_RESET)                ||
2554                 (status == PI_STATE_K_HALTED)           ||
2555                 (status == PI_STATE_K_DMA_UNAVAIL)      ||
2556                 (status == PI_STATE_K_UPGRADE))
2557                 return DFX_K_OUTSTATE;
2558
2559         /* Put response buffer on the command response queue */
2560
2561         bp->descr_block_virt->cmd_rsp[bp->cmd_rsp_reg.index.prod].long_0 = (u32) (PI_RCV_DESCR_M_SOP |
2562                         ((PI_CMD_RSP_K_SIZE_MAX / PI_ALIGN_K_CMD_RSP_BUFF) << PI_RCV_DESCR_V_SEG_LEN));
2563         bp->descr_block_virt->cmd_rsp[bp->cmd_rsp_reg.index.prod].long_1 = bp->cmd_rsp_phys;
2564
2565         /* Bump (and wrap) the producer index and write out to register */
2566
2567         bp->cmd_rsp_reg.index.prod += 1;
2568         bp->cmd_rsp_reg.index.prod &= PI_CMD_RSP_K_NUM_ENTRIES-1;
2569         dfx_port_write_long(bp, PI_PDQ_K_REG_CMD_RSP_PROD, bp->cmd_rsp_reg.lword);
2570
2571         /* Put request buffer on the command request queue */
2572
2573         bp->descr_block_virt->cmd_req[bp->cmd_req_reg.index.prod].long_0 = (u32) (PI_XMT_DESCR_M_SOP |
2574                         PI_XMT_DESCR_M_EOP | (PI_CMD_REQ_K_SIZE_MAX << PI_XMT_DESCR_V_SEG_LEN));
2575         bp->descr_block_virt->cmd_req[bp->cmd_req_reg.index.prod].long_1 = bp->cmd_req_phys;
2576
2577         /* Bump (and wrap) the producer index and write out to register */
2578
2579         bp->cmd_req_reg.index.prod += 1;
2580         bp->cmd_req_reg.index.prod &= PI_CMD_REQ_K_NUM_ENTRIES-1;
2581         dfx_port_write_long(bp, PI_PDQ_K_REG_CMD_REQ_PROD, bp->cmd_req_reg.lword);
2582
2583         /*
2584          * Here we wait for the command request consumer index to be equal
2585          * to the producer, indicating that the adapter has DMAed the request.
2586          */
2587
2588         for (timeout_cnt = 20000; timeout_cnt > 0; timeout_cnt--)
2589                 {
2590                 if (bp->cmd_req_reg.index.prod == (u8)(bp->cons_block_virt->cmd_req))
2591                         break;
2592                 udelay(100);                    /* wait for 100 microseconds */
2593                 }
2594         if (timeout_cnt == 0)
2595                 return DFX_K_HW_TIMEOUT;
2596
2597         /* Bump (and wrap) the completion index and write out to register */
2598
2599         bp->cmd_req_reg.index.comp += 1;
2600         bp->cmd_req_reg.index.comp &= PI_CMD_REQ_K_NUM_ENTRIES-1;
2601         dfx_port_write_long(bp, PI_PDQ_K_REG_CMD_REQ_PROD, bp->cmd_req_reg.lword);
2602
2603         /*
2604          * Here we wait for the command response consumer index to be equal
2605          * to the producer, indicating that the adapter has DMAed the response.
2606          */
2607
2608         for (timeout_cnt = 20000; timeout_cnt > 0; timeout_cnt--)
2609                 {
2610                 if (bp->cmd_rsp_reg.index.prod == (u8)(bp->cons_block_virt->cmd_rsp))
2611                         break;
2612                 udelay(100);                    /* wait for 100 microseconds */
2613                 }
2614         if (timeout_cnt == 0)
2615                 return DFX_K_HW_TIMEOUT;
2616
2617         /* Bump (and wrap) the completion index and write out to register */
2618
2619         bp->cmd_rsp_reg.index.comp += 1;
2620         bp->cmd_rsp_reg.index.comp &= PI_CMD_RSP_K_NUM_ENTRIES-1;
2621         dfx_port_write_long(bp, PI_PDQ_K_REG_CMD_RSP_PROD, bp->cmd_rsp_reg.lword);
2622         return DFX_K_SUCCESS;
2623         }
2624
2625
2626 /*
2627  * ========================
2628  * = dfx_hw_port_ctrl_req =
2629  * ========================
2630  *
2631  * Overview:
2632  *   Sends PDQ port control command to adapter firmware
2633  *
2634  * Returns:
2635  *   Host data register value in host_data if ptr is not NULL
2636  *
2637  * Arguments:
2638  *   bp                 - pointer to board information
2639  *       command        - port control command
2640  *       data_a         - port data A register value
2641  *       data_b         - port data B register value
2642  *       host_data      - ptr to host data register value
2643  *
2644  * Functional Description:
2645  *   Send generic port control command to adapter by writing
2646  *   to various PDQ port registers, then polling for completion.
2647  *
2648  * Return Codes:
2649  *   DFX_K_SUCCESS        - port control command succeeded
2650  *   DFX_K_HW_TIMEOUT - port control command timed out
2651  *
2652  * Assumptions:
2653  *   None
2654  *
2655  * Side Effects:
2656  *   None
2657  */
2658
2659 static int dfx_hw_port_ctrl_req(
2660         DFX_board_t     *bp,
2661         PI_UINT32       command,
2662         PI_UINT32       data_a,
2663         PI_UINT32       data_b,
2664         PI_UINT32       *host_data
2665         )
2666
2667         {
2668         PI_UINT32       port_cmd;               /* Port Control command register value */
2669         int                     timeout_cnt;    /* used in for loops */
2670
2671         /* Set Command Error bit in command longword */
2672
2673         port_cmd = (PI_UINT32) (command | PI_PCTRL_M_CMD_ERROR);
2674
2675         /* Issue port command to the adapter */
2676
2677         dfx_port_write_long(bp, PI_PDQ_K_REG_PORT_DATA_A, data_a);
2678         dfx_port_write_long(bp, PI_PDQ_K_REG_PORT_DATA_B, data_b);
2679         dfx_port_write_long(bp, PI_PDQ_K_REG_PORT_CTRL, port_cmd);
2680
2681         /* Now wait for command to complete */
2682
2683         if (command == PI_PCTRL_M_BLAST_FLASH)
2684                 timeout_cnt = 600000;   /* set command timeout count to 60 seconds */
2685         else
2686                 timeout_cnt = 20000;    /* set command timeout count to 2 seconds */
2687
2688         for (; timeout_cnt > 0; timeout_cnt--)
2689                 {
2690                 dfx_port_read_long(bp, PI_PDQ_K_REG_PORT_CTRL, &port_cmd);
2691                 if (!(port_cmd & PI_PCTRL_M_CMD_ERROR))
2692                         break;
2693                 udelay(100);                    /* wait for 100 microseconds */
2694                 }
2695         if (timeout_cnt == 0)
2696                 return DFX_K_HW_TIMEOUT;
2697
2698         /*
2699          * If the address of host_data is non-zero, assume caller has supplied a
2700          * non NULL pointer, and return the contents of the HOST_DATA register in
2701          * it.
2702          */
2703
2704         if (host_data != NULL)
2705                 dfx_port_read_long(bp, PI_PDQ_K_REG_HOST_DATA, host_data);
2706         return DFX_K_SUCCESS;
2707         }
2708
2709
2710 /*
2711  * =====================
2712  * = dfx_hw_adap_reset =
2713  * =====================
2714  *
2715  * Overview:
2716  *   Resets adapter
2717  *
2718  * Returns:
2719  *   None
2720  *
2721  * Arguments:
2722  *   bp   - pointer to board information
2723  *   type - type of reset to perform
2724  *
2725  * Functional Description:
2726  *   Issue soft reset to adapter by writing to PDQ Port Reset
2727  *   register.  Use incoming reset type to tell adapter what
2728  *   kind of reset operation to perform.
2729  *
2730  * Return Codes:
2731  *   None
2732  *
2733  * Assumptions:
2734  *   This routine merely issues a soft reset to the adapter.
2735  *   It is expected that after this routine returns, the caller
2736  *   will appropriately poll the Port Status register for the
2737  *   adapter to enter the proper state.
2738  *
2739  * Side Effects:
2740  *   Internal adapter registers are cleared.
2741  */
2742
2743 static void dfx_hw_adap_reset(
2744         DFX_board_t     *bp,
2745         PI_UINT32       type
2746         )
2747
2748         {
2749         /* Set Reset type and assert reset */
2750
2751         dfx_port_write_long(bp, PI_PDQ_K_REG_PORT_DATA_A, type);        /* tell adapter type of reset */
2752         dfx_port_write_long(bp, PI_PDQ_K_REG_PORT_RESET, PI_RESET_M_ASSERT_RESET);
2753
2754         /* Wait for at least 1 Microsecond according to the spec. We wait 20 just to be safe */
2755
2756         udelay(20);
2757
2758         /* Deassert reset */
2759
2760         dfx_port_write_long(bp, PI_PDQ_K_REG_PORT_RESET, 0);
2761         }
2762
2763
2764 /*
2765  * ========================
2766  * = dfx_hw_adap_state_rd =
2767  * ========================
2768  *
2769  * Overview:
2770  *   Returns current adapter state
2771  *
2772  * Returns:
2773  *   Adapter state per PDQ Port Specification
2774  *
2775  * Arguments:
2776  *   bp - pointer to board information
2777  *
2778  * Functional Description:
2779  *   Reads PDQ Port Status register and returns adapter state.
2780  *
2781  * Return Codes:
2782  *   None
2783  *
2784  * Assumptions:
2785  *   None
2786  *
2787  * Side Effects:
2788  *   None
2789  */
2790
2791 static int dfx_hw_adap_state_rd(DFX_board_t *bp)
2792         {
2793         PI_UINT32 port_status;          /* Port Status register value */
2794
2795         dfx_port_read_long(bp, PI_PDQ_K_REG_PORT_STATUS, &port_status);
2796         return (port_status & PI_PSTATUS_M_STATE) >> PI_PSTATUS_V_STATE;
2797         }
2798
2799
2800 /*
2801  * =====================
2802  * = dfx_hw_dma_uninit =
2803  * =====================
2804  *
2805  * Overview:
2806  *   Brings adapter to DMA_UNAVAILABLE state
2807  *
2808  * Returns:
2809  *   Condition code
2810  *
2811  * Arguments:
2812  *   bp   - pointer to board information
2813  *   type - type of reset to perform
2814  *
2815  * Functional Description:
2816  *   Bring adapter to DMA_UNAVAILABLE state by performing the following:
2817  *              1. Set reset type bit in Port Data A Register then reset adapter.
2818  *              2. Check that adapter is in DMA_UNAVAILABLE state.
2819  *
2820  * Return Codes:
2821  *   DFX_K_SUCCESS        - adapter is in DMA_UNAVAILABLE state
2822  *   DFX_K_HW_TIMEOUT - adapter did not reset properly
2823  *
2824  * Assumptions:
2825  *   None
2826  *
2827  * Side Effects:
2828  *   Internal adapter registers are cleared.
2829  */
2830
2831 static int dfx_hw_dma_uninit(DFX_board_t *bp, PI_UINT32 type)
2832         {
2833         int timeout_cnt;        /* used in for loops */
2834
2835         /* Set reset type bit and reset adapter */
2836
2837         dfx_hw_adap_reset(bp, type);
2838
2839         /* Now wait for adapter to enter DMA_UNAVAILABLE state */
2840
2841         for (timeout_cnt = 100000; timeout_cnt > 0; timeout_cnt--)
2842                 {
2843                 if (dfx_hw_adap_state_rd(bp) == PI_STATE_K_DMA_UNAVAIL)
2844                         break;
2845                 udelay(100);                                    /* wait for 100 microseconds */
2846                 }
2847         if (timeout_cnt == 0)
2848                 return DFX_K_HW_TIMEOUT;
2849         return DFX_K_SUCCESS;
2850         }
2851
2852 /*
2853  *      Align an sk_buff to a boundary power of 2
2854  *
2855  */
2856 #ifdef DYNAMIC_BUFFERS
2857 static void my_skb_align(struct sk_buff *skb, int n)
2858 {
2859         unsigned long x = (unsigned long)skb->data;
2860         unsigned long v;
2861
2862         v = ALIGN(x, n);        /* Where we want to be */
2863
2864         skb_reserve(skb, v - x);
2865 }
2866 #endif
2867
2868 /*
2869  * ================
2870  * = dfx_rcv_init =
2871  * ================
2872  *
2873  * Overview:
2874  *   Produces buffers to adapter LLC Host receive descriptor block
2875  *
2876  * Returns:
2877  *   None
2878  *
2879  * Arguments:
2880  *   bp - pointer to board information
2881  *   get_buffers - non-zero if buffers to be allocated
2882  *
2883  * Functional Description:
2884  *   This routine can be called during dfx_adap_init() or during an adapter
2885  *       reset.  It initializes the descriptor block and produces all allocated
2886  *   LLC Host queue receive buffers.
2887  *
2888  * Return Codes:
2889  *   Return 0 on success or -ENOMEM if buffer allocation failed (when using
2890  *   dynamic buffer allocation). If the buffer allocation failed, the
2891  *   already allocated buffers will not be released and the caller should do
2892  *   this.
2893  *
2894  * Assumptions:
2895  *   The PDQ has been reset and the adapter and driver maintained Type 2
2896  *   register indices are cleared.
2897  *
2898  * Side Effects:
2899  *   Receive buffers are posted to the adapter LLC queue and the adapter
2900  *   is notified.
2901  */
2902
2903 static int dfx_rcv_init(DFX_board_t *bp, int get_buffers)
2904         {
2905         int     i, j;                                   /* used in for loop */
2906
2907         /*
2908          *  Since each receive buffer is a single fragment of same length, initialize
2909          *  first longword in each receive descriptor for entire LLC Host descriptor
2910          *  block.  Also initialize second longword in each receive descriptor with
2911          *  physical address of receive buffer.  We'll always allocate receive
2912          *  buffers in powers of 2 so that we can easily fill the 256 entry descriptor
2913          *  block and produce new receive buffers by simply updating the receive
2914          *  producer index.
2915          *
2916          *      Assumptions:
2917          *              To support all shipping versions of PDQ, the receive buffer size
2918          *              must be mod 128 in length and the physical address must be 128 byte
2919          *              aligned.  In other words, bits 0-6 of the length and address must
2920          *              be zero for the following descriptor field entries to be correct on
2921          *              all PDQ-based boards.  We guaranteed both requirements during
2922          *              driver initialization when we allocated memory for the receive buffers.
2923          */
2924
2925         if (get_buffers) {
2926 #ifdef DYNAMIC_BUFFERS
2927         for (i = 0; i < (int)(bp->rcv_bufs_to_post); i++)
2928                 for (j = 0; (i + j) < (int)PI_RCV_DATA_K_NUM_ENTRIES; j += bp->rcv_bufs_to_post)
2929                 {
2930                         struct sk_buff *newskb;
2931                         dma_addr_t dma_addr;
2932
2933                         newskb = __netdev_alloc_skb(bp->dev, NEW_SKB_SIZE,
2934                                                     GFP_NOIO);
2935                         if (!newskb)
2936                                 return -ENOMEM;
2937                         /*
2938                          * align to 128 bytes for compatibility with
2939                          * the old EISA boards.
2940                          */
2941
2942                         my_skb_align(newskb, 128);
2943                         dma_addr = dma_map_single(bp->bus_dev,
2944                                                   newskb->data,
2945                                                   PI_RCV_DATA_K_SIZE_MAX,
2946                                                   DMA_FROM_DEVICE);
2947                         if (dma_mapping_error(bp->bus_dev, dma_addr)) {
2948                                 dev_kfree_skb(newskb);
2949                                 return -ENOMEM;
2950                         }
2951                         bp->descr_block_virt->rcv_data[i + j].long_0 =
2952                                 (u32)(PI_RCV_DESCR_M_SOP |
2953                                       ((PI_RCV_DATA_K_SIZE_MAX /
2954                                         PI_ALIGN_K_RCV_DATA_BUFF) <<
2955                                        PI_RCV_DESCR_V_SEG_LEN));
2956                         bp->descr_block_virt->rcv_data[i + j].long_1 =
2957                                 (u32)dma_addr;
2958
2959                         /*
2960                          * p_rcv_buff_va is only used inside the
2961                          * kernel so we put the skb pointer here.
2962                          */
2963                         bp->p_rcv_buff_va[i+j] = (char *) newskb;
2964                 }
2965 #else
2966         for (i=0; i < (int)(bp->rcv_bufs_to_post); i++)
2967                 for (j=0; (i + j) < (int)PI_RCV_DATA_K_NUM_ENTRIES; j += bp->rcv_bufs_to_post)
2968                         {
2969                         bp->descr_block_virt->rcv_data[i+j].long_0 = (u32) (PI_RCV_DESCR_M_SOP |
2970                                 ((PI_RCV_DATA_K_SIZE_MAX / PI_ALIGN_K_RCV_DATA_BUFF) << PI_RCV_DESCR_V_SEG_LEN));
2971                         bp->descr_block_virt->rcv_data[i+j].long_1 = (u32) (bp->rcv_block_phys + (i * PI_RCV_DATA_K_SIZE_MAX));
2972                         bp->p_rcv_buff_va[i+j] = (bp->rcv_block_virt + (i * PI_RCV_DATA_K_SIZE_MAX));
2973                         }
2974 #endif
2975         }
2976
2977         /* Update receive producer and Type 2 register */
2978
2979         bp->rcv_xmt_reg.index.rcv_prod = bp->rcv_bufs_to_post;
2980         dfx_port_write_long(bp, PI_PDQ_K_REG_TYPE_2_PROD, bp->rcv_xmt_reg.lword);
2981         return 0;
2982         }
2983
2984
2985 /*
2986  * =========================
2987  * = dfx_rcv_queue_process =
2988  * =========================
2989  *
2990  * Overview:
2991  *   Process received LLC frames.
2992  *
2993  * Returns:
2994  *   None
2995  *
2996  * Arguments:
2997  *   bp - pointer to board information
2998  *
2999  * Functional Description:
3000  *   Received LLC frames are processed until there are no more consumed frames.
3001  *   Once all frames are processed, the receive buffers are returned to the
3002  *   adapter.  Note that this algorithm fixes the length of time that can be spent
3003  *   in this routine, because there are a fixed number of receive buffers to
3004  *   process and buffers are not produced until this routine exits and returns
3005  *   to the ISR.
3006  *
3007  * Return Codes:
3008  *   None
3009  *
3010  * Assumptions:
3011  *   None
3012  *
3013  * Side Effects:
3014  *   None
3015  */
3016
3017 static void dfx_rcv_queue_process(
3018         DFX_board_t *bp
3019         )
3020
3021         {
3022         PI_TYPE_2_CONSUMER      *p_type_2_cons;         /* ptr to rcv/xmt consumer block register */
3023         char                            *p_buff;                        /* ptr to start of packet receive buffer (FMC descriptor) */
3024         u32                                     descr, pkt_len;         /* FMC descriptor field and packet length */
3025         struct sk_buff          *skb = NULL;                    /* pointer to a sk_buff to hold incoming packet data */
3026
3027         /* Service all consumed LLC receive frames */
3028
3029         p_type_2_cons = (PI_TYPE_2_CONSUMER *)(&bp->cons_block_virt->xmt_rcv_data);
3030         while (bp->rcv_xmt_reg.index.rcv_comp != p_type_2_cons->index.rcv_cons)
3031                 {
3032                 /* Process any errors */
3033                 dma_addr_t dma_addr;
3034                 int entry;
3035
3036                 entry = bp->rcv_xmt_reg.index.rcv_comp;
3037 #ifdef DYNAMIC_BUFFERS
3038                 p_buff = (char *) (((struct sk_buff *)bp->p_rcv_buff_va[entry])->data);
3039 #else
3040                 p_buff = bp->p_rcv_buff_va[entry];
3041 #endif
3042                 dma_addr = bp->descr_block_virt->rcv_data[entry].long_1;
3043                 dma_sync_single_for_cpu(bp->bus_dev,
3044                                         dma_addr + RCV_BUFF_K_DESCR,
3045                                         sizeof(u32),
3046                                         DMA_FROM_DEVICE);
3047                 memcpy(&descr, p_buff + RCV_BUFF_K_DESCR, sizeof(u32));
3048
3049                 if (descr & PI_FMC_DESCR_M_RCC_FLUSH)
3050                         {
3051                         if (descr & PI_FMC_DESCR_M_RCC_CRC)
3052                                 bp->rcv_crc_errors++;
3053                         else
3054                                 bp->rcv_frame_status_errors++;
3055                         }
3056                 else
3057                 {
3058                         int rx_in_place = 0;
3059
3060                         /* The frame was received without errors - verify packet length */
3061
3062                         pkt_len = (u32)((descr & PI_FMC_DESCR_M_LEN) >> PI_FMC_DESCR_V_LEN);
3063                         pkt_len -= 4;                           /* subtract 4 byte CRC */
3064                         if (!IN_RANGE(pkt_len, FDDI_K_LLC_ZLEN, FDDI_K_LLC_LEN))
3065                                 bp->rcv_length_errors++;
3066                         else{
3067 #ifdef DYNAMIC_BUFFERS
3068                                 struct sk_buff *newskb = NULL;
3069
3070                                 if (pkt_len > SKBUFF_RX_COPYBREAK) {
3071                                         dma_addr_t new_dma_addr;
3072
3073                                         newskb = netdev_alloc_skb(bp->dev,
3074                                                                   NEW_SKB_SIZE);
3075                                         if (newskb){
3076                                                 my_skb_align(newskb, 128);
3077                                                 new_dma_addr = dma_map_single(
3078                                                                 bp->bus_dev,
3079                                                                 newskb->data,
3080                                                                 PI_RCV_DATA_K_SIZE_MAX,
3081                                                                 DMA_FROM_DEVICE);
3082                                                 if (dma_mapping_error(
3083                                                                 bp->bus_dev,
3084                                                                 new_dma_addr)) {
3085                                                         dev_kfree_skb(newskb);
3086                                                         newskb = NULL;
3087                                                 }
3088                                         }
3089                                         if (newskb) {
3090                                                 rx_in_place = 1;
3091
3092                                                 skb = (struct sk_buff *)bp->p_rcv_buff_va[entry];
3093                                                 dma_unmap_single(bp->bus_dev,
3094                                                         dma_addr,
3095                                                         PI_RCV_DATA_K_SIZE_MAX,
3096                                                         DMA_FROM_DEVICE);
3097                                                 skb_reserve(skb, RCV_BUFF_K_PADDING);
3098                                                 bp->p_rcv_buff_va[entry] = (char *)newskb;
3099                                                 bp->descr_block_virt->rcv_data[entry].long_1 = (u32)new_dma_addr;
3100                                         }
3101                                 }
3102                                 if (!newskb)
3103 #endif
3104                                         /* Alloc new buffer to pass up,
3105                                          * add room for PRH. */
3106                                         skb = netdev_alloc_skb(bp->dev,
3107                                                                pkt_len + 3);
3108                                 if (skb == NULL)
3109                                         {
3110                                         printk("%s: Could not allocate receive buffer.  Dropping packet.\n", bp->dev->name);
3111                                         bp->rcv_discards++;
3112                                         break;
3113                                         }
3114                                 else {
3115                                         if (!rx_in_place) {
3116                                                 /* Receive buffer allocated, pass receive packet up */
3117                                                 dma_sync_single_for_cpu(
3118                                                         bp->bus_dev,
3119                                                         dma_addr +
3120                                                         RCV_BUFF_K_PADDING,
3121                                                         pkt_len + 3,
3122                                                         DMA_FROM_DEVICE);
3123
3124                                                 skb_copy_to_linear_data(skb,
3125                                                                p_buff + RCV_BUFF_K_PADDING,
3126                                                                pkt_len + 3);
3127                                         }
3128
3129                                         skb_reserve(skb,3);             /* adjust data field so that it points to FC byte */
3130                                         skb_put(skb, pkt_len);          /* pass up packet length, NOT including CRC */
3131                                         skb->protocol = fddi_type_trans(skb, bp->dev);
3132                                         bp->rcv_total_bytes += skb->len;
3133                                         netif_rx(skb);
3134
3135                                         /* Update the rcv counters */
3136                                         bp->rcv_total_frames++;
3137                                         if (*(p_buff + RCV_BUFF_K_DA) & 0x01)
3138                                                 bp->rcv_multicast_frames++;
3139                                 }
3140                         }
3141                         }
3142
3143                 /*
3144                  * Advance the producer (for recycling) and advance the completion
3145                  * (for servicing received frames).  Note that it is okay to
3146                  * advance the producer without checking that it passes the
3147                  * completion index because they are both advanced at the same
3148                  * rate.
3149                  */
3150
3151                 bp->rcv_xmt_reg.index.rcv_prod += 1;
3152                 bp->rcv_xmt_reg.index.rcv_comp += 1;
3153                 }
3154         }
3155
3156
3157 /*
3158  * =====================
3159  * = dfx_xmt_queue_pkt =
3160  * =====================
3161  *
3162  * Overview:
3163  *   Queues packets for transmission
3164  *
3165  * Returns:
3166  *   Condition code
3167  *
3168  * Arguments:
3169  *   skb - pointer to sk_buff to queue for transmission
3170  *   dev - pointer to device information
3171  *
3172  * Functional Description:
3173  *   Here we assume that an incoming skb transmit request
3174  *   is contained in a single physically contiguous buffer
3175  *   in which the virtual address of the start of packet
3176  *   (skb->data) can be converted to a physical address
3177  *   by using pci_map_single().
3178  *
3179  *   Since the adapter architecture requires a three byte
3180  *   packet request header to prepend the start of packet,
3181  *   we'll write the three byte field immediately prior to
3182  *   the FC byte.  This assumption is valid because we've
3183  *   ensured that dev->hard_header_len includes three pad
3184  *   bytes.  By posting a single fragment to the adapter,
3185  *   we'll reduce the number of descriptor fetches and
3186  *   bus traffic needed to send the request.
3187  *
3188  *   Also, we can't free the skb until after it's been DMA'd
3189  *   out by the adapter, so we'll queue it in the driver and
3190  *   return it in dfx_xmt_done.
3191  *
3192  * Return Codes:
3193  *   0 - driver queued packet, link is unavailable, or skbuff was bad
3194  *       1 - caller should requeue the sk_buff for later transmission
3195  *
3196  * Assumptions:
3197  *       First and foremost, we assume the incoming skb pointer
3198  *   is NOT NULL and is pointing to a valid sk_buff structure.
3199  *
3200  *   The outgoing packet is complete, starting with the
3201  *   frame control byte including the last byte of data,
3202  *   but NOT including the 4 byte CRC.  We'll let the
3203  *   adapter hardware generate and append the CRC.
3204  *
3205  *   The entire packet is stored in one physically
3206  *   contiguous buffer which is not cached and whose
3207  *   32-bit physical address can be determined.
3208  *
3209  *   It's vital that this routine is NOT reentered for the
3210  *   same board and that the OS is not in another section of
3211  *   code (eg. dfx_int_common) for the same board on a
3212  *   different thread.
3213  *
3214  * Side Effects:
3215  *   None
3216  */
3217
3218 static netdev_tx_t dfx_xmt_queue_pkt(struct sk_buff *skb,
3219                                      struct net_device *dev)
3220         {
3221         DFX_board_t             *bp = netdev_priv(dev);
3222         u8                      prod;                           /* local transmit producer index */
3223         PI_XMT_DESCR            *p_xmt_descr;           /* ptr to transmit descriptor block entry */
3224         XMT_DRIVER_DESCR        *p_xmt_drv_descr;       /* ptr to transmit driver descriptor */
3225         dma_addr_t              dma_addr;
3226         unsigned long           flags;
3227
3228         netif_stop_queue(dev);
3229
3230         /*
3231          * Verify that incoming transmit request is OK
3232          *
3233          * Note: The packet size check is consistent with other
3234          *               Linux device drivers, although the correct packet
3235          *               size should be verified before calling the
3236          *               transmit routine.
3237          */
3238
3239         if (!IN_RANGE(skb->len, FDDI_K_LLC_ZLEN, FDDI_K_LLC_LEN))
3240         {
3241                 printk("%s: Invalid packet length - %u bytes\n",
3242                         dev->name, skb->len);
3243                 bp->xmt_length_errors++;                /* bump error counter */
3244                 netif_wake_queue(dev);
3245                 dev_kfree_skb(skb);
3246                 return NETDEV_TX_OK;                    /* return "success" */
3247         }
3248         /*
3249          * See if adapter link is available, if not, free buffer
3250          *
3251          * Note: If the link isn't available, free buffer and return 0
3252          *               rather than tell the upper layer to requeue the packet.
3253          *               The methodology here is that by the time the link
3254          *               becomes available, the packet to be sent will be
3255          *               fairly stale.  By simply dropping the packet, the
3256          *               higher layer protocols will eventually time out
3257          *               waiting for response packets which it won't receive.
3258          */
3259
3260         if (bp->link_available == PI_K_FALSE)
3261                 {
3262                 if (dfx_hw_adap_state_rd(bp) == PI_STATE_K_LINK_AVAIL)  /* is link really available? */
3263                         bp->link_available = PI_K_TRUE;         /* if so, set flag and continue */
3264                 else
3265                         {
3266                         bp->xmt_discards++;                                     /* bump error counter */
3267                         dev_kfree_skb(skb);             /* free sk_buff now */
3268                         netif_wake_queue(dev);
3269                         return NETDEV_TX_OK;            /* return "success" */
3270                         }
3271                 }
3272
3273         /* Write the three PRH bytes immediately before the FC byte */
3274
3275         skb_push(skb, 3);
3276         skb->data[0] = DFX_PRH0_BYTE;   /* these byte values are defined */
3277         skb->data[1] = DFX_PRH1_BYTE;   /* in the Motorola FDDI MAC chip */
3278         skb->data[2] = DFX_PRH2_BYTE;   /* specification */
3279
3280         dma_addr = dma_map_single(bp->bus_dev, skb->data, skb->len,
3281                                   DMA_TO_DEVICE);
3282         if (dma_mapping_error(bp->bus_dev, dma_addr)) {
3283                 skb_pull(skb, 3);
3284                 return NETDEV_TX_BUSY;
3285         }
3286
3287         spin_lock_irqsave(&bp->lock, flags);
3288
3289         /* Get the current producer and the next free xmt data descriptor */
3290
3291         prod            = bp->rcv_xmt_reg.index.xmt_prod;
3292         p_xmt_descr = &(bp->descr_block_virt->xmt_data[prod]);
3293
3294         /*
3295          * Get pointer to auxiliary queue entry to contain information
3296          * for this packet.
3297          *
3298          * Note: The current xmt producer index will become the
3299          *       current xmt completion index when we complete this
3300          *       packet later on.  So, we'll get the pointer to the
3301          *       next auxiliary queue entry now before we bump the
3302          *       producer index.
3303          */
3304
3305         p_xmt_drv_descr = &(bp->xmt_drv_descr_blk[prod++]);     /* also bump producer index */
3306
3307         /*
3308          * Write the descriptor with buffer info and bump producer
3309          *
3310          * Note: Since we need to start DMA from the packet request
3311          *               header, we'll add 3 bytes to the DMA buffer length,
3312          *               and we'll determine the physical address of the
3313          *               buffer from the PRH, not skb->data.
3314          *
3315          * Assumptions:
3316          *               1. Packet starts with the frame control (FC) byte
3317          *                  at skb->data.
3318          *               2. The 4-byte CRC is not appended to the buffer or
3319          *                      included in the length.
3320          *               3. Packet length (skb->len) is from FC to end of
3321          *                      data, inclusive.
3322          *               4. The packet length does not exceed the maximum
3323          *                      FDDI LLC frame length of 4491 bytes.
3324          *               5. The entire packet is contained in a physically
3325          *                      contiguous, non-cached, locked memory space
3326          *                      comprised of a single buffer pointed to by
3327          *                      skb->data.
3328          *               6. The physical address of the start of packet
3329          *                      can be determined from the virtual address
3330          *                      by using pci_map_single() and is only 32-bits
3331          *                      wide.
3332          */
3333
3334         p_xmt_descr->long_0     = (u32) (PI_XMT_DESCR_M_SOP | PI_XMT_DESCR_M_EOP | ((skb->len) << PI_XMT_DESCR_V_SEG_LEN));
3335         p_xmt_descr->long_1 = (u32)dma_addr;
3336
3337         /*
3338          * Verify that descriptor is actually available
3339          *
3340          * Note: If descriptor isn't available, return 1 which tells
3341          *       the upper layer to requeue the packet for later
3342          *       transmission.
3343          *
3344          *       We need to ensure that the producer never reaches the
3345          *       completion, except to indicate that the queue is empty.
3346          */
3347
3348         if (prod == bp->rcv_xmt_reg.index.xmt_comp)
3349         {
3350                 skb_pull(skb,3);
3351                 spin_unlock_irqrestore(&bp->lock, flags);
3352                 return NETDEV_TX_BUSY;  /* requeue packet for later */
3353         }
3354
3355         /*
3356          * Save info for this packet for xmt done indication routine
3357          *
3358          * Normally, we'd save the producer index in the p_xmt_drv_descr
3359          * structure so that we'd have it handy when we complete this
3360          * packet later (in dfx_xmt_done).  However, since the current
3361          * transmit architecture guarantees a single fragment for the
3362          * entire packet, we can simply bump the completion index by
3363          * one (1) for each completed packet.
3364          *
3365          * Note: If this assumption changes and we're presented with
3366          *       an inconsistent number of transmit fragments for packet
3367          *       data, we'll need to modify this code to save the current
3368          *       transmit producer index.
3369          */
3370
3371         p_xmt_drv_descr->p_skb = skb;
3372
3373         /* Update Type 2 register */
3374
3375         bp->rcv_xmt_reg.index.xmt_prod = prod;
3376         dfx_port_write_long(bp, PI_PDQ_K_REG_TYPE_2_PROD, bp->rcv_xmt_reg.lword);
3377         spin_unlock_irqrestore(&bp->lock, flags);
3378         netif_wake_queue(dev);
3379         return NETDEV_TX_OK;    /* packet queued to adapter */
3380         }
3381
3382
3383 /*
3384  * ================
3385  * = dfx_xmt_done =
3386  * ================
3387  *
3388  * Overview:
3389  *   Processes all frames that have been transmitted.
3390  *
3391  * Returns:
3392  *   None
3393  *
3394  * Arguments:
3395  *   bp - pointer to board information
3396  *
3397  * Functional Description:
3398  *   For all consumed transmit descriptors that have not
3399  *   yet been completed, we'll free the skb we were holding
3400  *   onto using dev_kfree_skb and bump the appropriate
3401  *   counters.
3402  *
3403  * Return Codes:
3404  *   None
3405  *
3406  * Assumptions:
3407  *   The Type 2 register is not updated in this routine.  It is
3408  *   assumed that it will be updated in the ISR when dfx_xmt_done
3409  *   returns.
3410  *
3411  * Side Effects:
3412  *   None
3413  */
3414
3415 static int dfx_xmt_done(DFX_board_t *bp)
3416         {
3417         XMT_DRIVER_DESCR        *p_xmt_drv_descr;       /* ptr to transmit driver descriptor */
3418         PI_TYPE_2_CONSUMER      *p_type_2_cons;         /* ptr to rcv/xmt consumer block register */
3419         u8                      comp;                   /* local transmit completion index */
3420         int                     freed = 0;              /* buffers freed */
3421
3422         /* Service all consumed transmit frames */
3423
3424         p_type_2_cons = (PI_TYPE_2_CONSUMER *)(&bp->cons_block_virt->xmt_rcv_data);
3425         while (bp->rcv_xmt_reg.index.xmt_comp != p_type_2_cons->index.xmt_cons)
3426                 {
3427                 /* Get pointer to the transmit driver descriptor block information */
3428
3429                 p_xmt_drv_descr = &(bp->xmt_drv_descr_blk[bp->rcv_xmt_reg.index.xmt_comp]);
3430
3431                 /* Increment transmit counters */
3432
3433                 bp->xmt_total_frames++;
3434                 bp->xmt_total_bytes += p_xmt_drv_descr->p_skb->len;
3435
3436                 /* Return skb to operating system */
3437                 comp = bp->rcv_xmt_reg.index.xmt_comp;
3438                 dma_unmap_single(bp->bus_dev,
3439                                  bp->descr_block_virt->xmt_data[comp].long_1,
3440                                  p_xmt_drv_descr->p_skb->len,
3441                                  DMA_TO_DEVICE);
3442                 dev_kfree_skb_irq(p_xmt_drv_descr->p_skb);
3443
3444                 /*
3445                  * Move to start of next packet by updating completion index
3446                  *
3447                  * Here we assume that a transmit packet request is always
3448                  * serviced by posting one fragment.  We can therefore
3449                  * simplify the completion code by incrementing the
3450                  * completion index by one.  This code will need to be
3451                  * modified if this assumption changes.  See comments
3452                  * in dfx_xmt_queue_pkt for more details.
3453                  */
3454
3455                 bp->rcv_xmt_reg.index.xmt_comp += 1;
3456                 freed++;
3457                 }
3458         return freed;
3459         }
3460
3461
3462 /*
3463  * =================
3464  * = dfx_rcv_flush =
3465  * =================
3466  *
3467  * Overview:
3468  *   Remove all skb's in the receive ring.
3469  *
3470  * Returns:
3471  *   None
3472  *
3473  * Arguments:
3474  *   bp - pointer to board information
3475  *
3476  * Functional Description:
3477  *   Free's all the dynamically allocated skb's that are
3478  *   currently attached to the device receive ring. This
3479  *   function is typically only used when the device is
3480  *   initialized or reinitialized.
3481  *
3482  * Return Codes:
3483  *   None
3484  *
3485  * Side Effects:
3486  *   None
3487  */
3488 #ifdef DYNAMIC_BUFFERS
3489 static void dfx_rcv_flush( DFX_board_t *bp )
3490         {
3491         int i, j;
3492
3493         for (i = 0; i < (int)(bp->rcv_bufs_to_post); i++)
3494                 for (j = 0; (i + j) < (int)PI_RCV_DATA_K_NUM_ENTRIES; j += bp->rcv_bufs_to_post)
3495                 {
3496                         struct sk_buff *skb;
3497                         skb = (struct sk_buff *)bp->p_rcv_buff_va[i+j];
3498                         if (skb) {
3499                                 dma_unmap_single(bp->bus_dev,
3500                                                  bp->descr_block_virt->rcv_data[i+j].long_1,
3501                                                  PI_RCV_DATA_K_SIZE_MAX,
3502                                                  DMA_FROM_DEVICE);
3503                                 dev_kfree_skb(skb);
3504                         }
3505                         bp->p_rcv_buff_va[i+j] = NULL;
3506                 }
3507
3508         }
3509 #endif /* DYNAMIC_BUFFERS */
3510
3511 /*
3512  * =================
3513  * = dfx_xmt_flush =
3514  * =================
3515  *
3516  * Overview:
3517  *   Processes all frames whether they've been transmitted
3518  *   or not.
3519  *
3520  * Returns:
3521  *   None
3522  *
3523  * Arguments:
3524  *   bp - pointer to board information
3525  *
3526  * Functional Description:
3527  *   For all produced transmit descriptors that have not
3528  *   yet been completed, we'll free the skb we were holding
3529  *   onto using dev_kfree_skb and bump the appropriate
3530  *   counters.  Of course, it's possible that some of
3531  *   these transmit requests actually did go out, but we
3532  *   won't make that distinction here.  Finally, we'll
3533  *   update the consumer index to match the producer.
3534  *
3535  * Return Codes:
3536  *   None
3537  *
3538  * Assumptions:
3539  *   This routine does NOT update the Type 2 register.  It
3540  *   is assumed that this routine is being called during a
3541  *   transmit flush interrupt, or a shutdown or close routine.
3542  *
3543  * Side Effects:
3544  *   None
3545  */
3546
3547 static void dfx_xmt_flush( DFX_board_t *bp )
3548         {
3549         u32                     prod_cons;              /* rcv/xmt consumer block longword */
3550         XMT_DRIVER_DESCR        *p_xmt_drv_descr;       /* ptr to transmit driver descriptor */
3551         u8                      comp;                   /* local transmit completion index */
3552
3553         /* Flush all outstanding transmit frames */
3554
3555         while (bp->rcv_xmt_reg.index.xmt_comp != bp->rcv_xmt_reg.index.xmt_prod)
3556                 {
3557                 /* Get pointer to the transmit driver descriptor block information */
3558
3559                 p_xmt_drv_descr = &(bp->xmt_drv_descr_blk[bp->rcv_xmt_reg.index.xmt_comp]);
3560
3561                 /* Return skb to operating system */
3562                 comp = bp->rcv_xmt_reg.index.xmt_comp;
3563                 dma_unmap_single(bp->bus_dev,
3564                                  bp->descr_block_virt->xmt_data[comp].long_1,
3565                                  p_xmt_drv_descr->p_skb->len,
3566                                  DMA_TO_DEVICE);
3567                 dev_kfree_skb(p_xmt_drv_descr->p_skb);
3568
3569                 /* Increment transmit error counter */
3570
3571                 bp->xmt_discards++;
3572
3573                 /*
3574                  * Move to start of next packet by updating completion index
3575                  *
3576                  * Here we assume that a transmit packet request is always
3577                  * serviced by posting one fragment.  We can therefore
3578                  * simplify the completion code by incrementing the
3579                  * completion index by one.  This code will need to be
3580                  * modified if this assumption changes.  See comments
3581                  * in dfx_xmt_queue_pkt for more details.
3582                  */
3583
3584                 bp->rcv_xmt_reg.index.xmt_comp += 1;
3585                 }
3586
3587         /* Update the transmit consumer index in the consumer block */
3588
3589         prod_cons = (u32)(bp->cons_block_virt->xmt_rcv_data & ~PI_CONS_M_XMT_INDEX);
3590         prod_cons |= (u32)(bp->rcv_xmt_reg.index.xmt_prod << PI_CONS_V_XMT_INDEX);
3591         bp->cons_block_virt->xmt_rcv_data = prod_cons;
3592         }
3593
3594 /*
3595  * ==================
3596  * = dfx_unregister =
3597  * ==================
3598  *
3599  * Overview:
3600  *   Shuts down an FDDI controller
3601  *
3602  * Returns:
3603  *   Condition code
3604  *
3605  * Arguments:
3606  *   bdev - pointer to device information
3607  *
3608  * Functional Description:
3609  *
3610  * Return Codes:
3611  *   None
3612  *
3613  * Assumptions:
3614  *   It compiles so it should work :-( (PCI cards do :-)
3615  *
3616  * Side Effects:
3617  *   Device structures for FDDI adapters (fddi0, fddi1, etc) are
3618  *   freed.
3619  */
3620 static void dfx_unregister(struct device *bdev)
3621 {
3622         struct net_device *dev = dev_get_drvdata(bdev);
3623         DFX_board_t *bp = netdev_priv(dev);
3624         int dfx_bus_pci = dev_is_pci(bdev);
3625         int dfx_bus_tc = DFX_BUS_TC(bdev);
3626         int dfx_use_mmio = DFX_MMIO || dfx_bus_tc;
3627         resource_size_t bar_start = 0;          /* pointer to port */
3628         resource_size_t bar_len = 0;            /* resource length */
3629         int             alloc_size;             /* total buffer size used */
3630
3631         unregister_netdev(dev);
3632
3633         alloc_size = sizeof(PI_DESCR_BLOCK) +
3634                      PI_CMD_REQ_K_SIZE_MAX + PI_CMD_RSP_K_SIZE_MAX +
3635 #ifndef DYNAMIC_BUFFERS
3636                      (bp->rcv_bufs_to_post * PI_RCV_DATA_K_SIZE_MAX) +
3637 #endif
3638                      sizeof(PI_CONSUMER_BLOCK) +
3639                      (PI_ALIGN_K_DESC_BLK - 1);
3640         if (bp->kmalloced)
3641                 dma_free_coherent(bdev, alloc_size,
3642                                   bp->kmalloced, bp->kmalloced_dma);
3643
3644         dfx_bus_uninit(dev);
3645
3646         dfx_get_bars(bdev, &bar_start, &bar_len);
3647         if (dfx_use_mmio) {
3648                 iounmap(bp->base.mem);
3649                 release_mem_region(bar_start, bar_len);
3650         } else
3651                 release_region(bar_start, bar_len);
3652
3653         if (dfx_bus_pci)
3654                 pci_disable_device(to_pci_dev(bdev));
3655
3656         free_netdev(dev);
3657 }
3658
3659
3660 static int __maybe_unused dfx_dev_register(struct device *);
3661 static int __maybe_unused dfx_dev_unregister(struct device *);
3662
3663 #ifdef CONFIG_PCI
3664 static int dfx_pci_register(struct pci_dev *, const struct pci_device_id *);
3665 static void dfx_pci_unregister(struct pci_dev *);
3666
3667 static DEFINE_PCI_DEVICE_TABLE(dfx_pci_table) = {
3668         { PCI_DEVICE(PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_FDDI) },
3669         { }
3670 };
3671 MODULE_DEVICE_TABLE(pci, dfx_pci_table);
3672
3673 static struct pci_driver dfx_pci_driver = {
3674         .name           = "defxx",
3675         .id_table       = dfx_pci_table,
3676         .probe          = dfx_pci_register,
3677         .remove         = dfx_pci_unregister,
3678 };
3679
3680 static int dfx_pci_register(struct pci_dev *pdev,
3681                             const struct pci_device_id *ent)
3682 {
3683         return dfx_register(&pdev->dev);
3684 }
3685
3686 static void dfx_pci_unregister(struct pci_dev *pdev)
3687 {
3688         dfx_unregister(&pdev->dev);
3689 }
3690 #endif /* CONFIG_PCI */
3691
3692 #ifdef CONFIG_EISA
3693 static struct eisa_device_id dfx_eisa_table[] = {
3694         { "DEC3001", DEFEA_PROD_ID_1 },
3695         { "DEC3002", DEFEA_PROD_ID_2 },
3696         { "DEC3003", DEFEA_PROD_ID_3 },
3697         { "DEC3004", DEFEA_PROD_ID_4 },
3698         { }
3699 };
3700 MODULE_DEVICE_TABLE(eisa, dfx_eisa_table);
3701
3702 static struct eisa_driver dfx_eisa_driver = {
3703         .id_table       = dfx_eisa_table,
3704         .driver         = {
3705                 .name   = "defxx",
3706                 .bus    = &eisa_bus_type,
3707                 .probe  = dfx_dev_register,
3708                 .remove = dfx_dev_unregister,
3709         },
3710 };
3711 #endif /* CONFIG_EISA */
3712
3713 #ifdef CONFIG_TC
3714 static struct tc_device_id const dfx_tc_table[] = {
3715         { "DEC     ", "PMAF-FA " },
3716         { "DEC     ", "PMAF-FD " },
3717         { "DEC     ", "PMAF-FS " },
3718         { "DEC     ", "PMAF-FU " },
3719         { }
3720 };
3721 MODULE_DEVICE_TABLE(tc, dfx_tc_table);
3722
3723 static struct tc_driver dfx_tc_driver = {
3724         .id_table       = dfx_tc_table,
3725         .driver         = {
3726                 .name   = "defxx",
3727                 .bus    = &tc_bus_type,
3728                 .probe  = dfx_dev_register,
3729                 .remove = dfx_dev_unregister,
3730         },
3731 };
3732 #endif /* CONFIG_TC */
3733
3734 static int __maybe_unused dfx_dev_register(struct device *dev)
3735 {
3736         int status;
3737
3738         status = dfx_register(dev);
3739         if (!status)
3740                 get_device(dev);
3741         return status;
3742 }
3743
3744 static int __maybe_unused dfx_dev_unregister(struct device *dev)
3745 {
3746         put_device(dev);
3747         dfx_unregister(dev);
3748         return 0;
3749 }
3750
3751
3752 static int dfx_init(void)
3753 {
3754         int status;
3755
3756         status = pci_register_driver(&dfx_pci_driver);
3757         if (!status)
3758                 status = eisa_driver_register(&dfx_eisa_driver);
3759         if (!status)
3760                 status = tc_register_driver(&dfx_tc_driver);
3761         return status;
3762 }
3763
3764 static void dfx_cleanup(void)
3765 {
3766         tc_unregister_driver(&dfx_tc_driver);
3767         eisa_driver_unregister(&dfx_eisa_driver);
3768         pci_unregister_driver(&dfx_pci_driver);
3769 }
3770
3771 module_init(dfx_init);
3772 module_exit(dfx_cleanup);
3773 MODULE_AUTHOR("Lawrence V. Stefani");
3774 MODULE_DESCRIPTION("DEC FDDIcontroller TC/EISA/PCI (DEFTA/DEFEA/DEFPA) driver "
3775                    DRV_VERSION " " DRV_RELDATE);
3776 MODULE_LICENSE("GPL");