Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
[pandora-kernel.git] / drivers / net / ethernet / broadcom / sb1250-mac.c
1 /*
2  * Copyright (C) 2001,2002,2003,2004 Broadcom Corporation
3  * Copyright (c) 2006, 2007  Maciej W. Rozycki
4  *
5  * This program is free software; you can redistribute it and/or
6  * modify it under the terms of the GNU General Public License
7  * as published by the Free Software Foundation; either version 2
8  * of the License, or (at your option) any later version.
9  *
10  * This program is distributed in the hope that it will be useful,
11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
13  * GNU General Public License for more details.
14  *
15  * You should have received a copy of the GNU General Public License
16  * along with this program; if not, write to the Free Software
17  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
18  *
19  *
20  * This driver is designed for the Broadcom SiByte SOC built-in
21  * Ethernet controllers. Written by Mitch Lichtenberg at Broadcom Corp.
22  *
23  * Updated to the driver model and the PHY abstraction layer
24  * by Maciej W. Rozycki.
25  */
26
27 #include <linux/bug.h>
28 #include <linux/module.h>
29 #include <linux/kernel.h>
30 #include <linux/string.h>
31 #include <linux/timer.h>
32 #include <linux/errno.h>
33 #include <linux/ioport.h>
34 #include <linux/slab.h>
35 #include <linux/interrupt.h>
36 #include <linux/netdevice.h>
37 #include <linux/etherdevice.h>
38 #include <linux/skbuff.h>
39 #include <linux/init.h>
40 #include <linux/bitops.h>
41 #include <linux/err.h>
42 #include <linux/ethtool.h>
43 #include <linux/mii.h>
44 #include <linux/phy.h>
45 #include <linux/platform_device.h>
46 #include <linux/prefetch.h>
47
48 #include <asm/cache.h>
49 #include <asm/io.h>
50 #include <asm/processor.h>      /* Processor type for cache alignment. */
51
52 /* Operational parameters that usually are not changed. */
53
54 #define CONFIG_SBMAC_COALESCE
55
56 /* Time in jiffies before concluding the transmitter is hung. */
57 #define TX_TIMEOUT  (2*HZ)
58
59
60 MODULE_AUTHOR("Mitch Lichtenberg (Broadcom Corp.)");
61 MODULE_DESCRIPTION("Broadcom SiByte SOC GB Ethernet driver");
62
63 /* A few user-configurable values which may be modified when a driver
64    module is loaded. */
65
66 /* 1 normal messages, 0 quiet .. 7 verbose. */
67 static int debug = 1;
68 module_param(debug, int, S_IRUGO);
69 MODULE_PARM_DESC(debug, "Debug messages");
70
71 #ifdef CONFIG_SBMAC_COALESCE
72 static int int_pktcnt_tx = 255;
73 module_param(int_pktcnt_tx, int, S_IRUGO);
74 MODULE_PARM_DESC(int_pktcnt_tx, "TX packet count");
75
76 static int int_timeout_tx = 255;
77 module_param(int_timeout_tx, int, S_IRUGO);
78 MODULE_PARM_DESC(int_timeout_tx, "TX timeout value");
79
80 static int int_pktcnt_rx = 64;
81 module_param(int_pktcnt_rx, int, S_IRUGO);
82 MODULE_PARM_DESC(int_pktcnt_rx, "RX packet count");
83
84 static int int_timeout_rx = 64;
85 module_param(int_timeout_rx, int, S_IRUGO);
86 MODULE_PARM_DESC(int_timeout_rx, "RX timeout value");
87 #endif
88
89 #include <asm/sibyte/board.h>
90 #include <asm/sibyte/sb1250.h>
91 #if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
92 #include <asm/sibyte/bcm1480_regs.h>
93 #include <asm/sibyte/bcm1480_int.h>
94 #define R_MAC_DMA_OODPKTLOST_RX R_MAC_DMA_OODPKTLOST
95 #elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
96 #include <asm/sibyte/sb1250_regs.h>
97 #include <asm/sibyte/sb1250_int.h>
98 #else
99 #error invalid SiByte MAC configuration
100 #endif
101 #include <asm/sibyte/sb1250_scd.h>
102 #include <asm/sibyte/sb1250_mac.h>
103 #include <asm/sibyte/sb1250_dma.h>
104
105 #if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
106 #define UNIT_INT(n)             (K_BCM1480_INT_MAC_0 + ((n) * 2))
107 #elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
108 #define UNIT_INT(n)             (K_INT_MAC_0 + (n))
109 #else
110 #error invalid SiByte MAC configuration
111 #endif
112
113 #ifdef K_INT_PHY
114 #define SBMAC_PHY_INT                   K_INT_PHY
115 #else
116 #define SBMAC_PHY_INT                   PHY_POLL
117 #endif
118
119 /**********************************************************************
120  *  Simple types
121  ********************************************************************* */
122
123 enum sbmac_speed {
124         sbmac_speed_none = 0,
125         sbmac_speed_10 = SPEED_10,
126         sbmac_speed_100 = SPEED_100,
127         sbmac_speed_1000 = SPEED_1000,
128 };
129
130 enum sbmac_duplex {
131         sbmac_duplex_none = -1,
132         sbmac_duplex_half = DUPLEX_HALF,
133         sbmac_duplex_full = DUPLEX_FULL,
134 };
135
136 enum sbmac_fc {
137         sbmac_fc_none,
138         sbmac_fc_disabled,
139         sbmac_fc_frame,
140         sbmac_fc_collision,
141         sbmac_fc_carrier,
142 };
143
144 enum sbmac_state {
145         sbmac_state_uninit,
146         sbmac_state_off,
147         sbmac_state_on,
148         sbmac_state_broken,
149 };
150
151
152 /**********************************************************************
153  *  Macros
154  ********************************************************************* */
155
156
157 #define SBDMA_NEXTBUF(d,f) ((((d)->f+1) == (d)->sbdma_dscrtable_end) ? \
158                           (d)->sbdma_dscrtable : (d)->f+1)
159
160
161 #define NUMCACHEBLKS(x) (((x)+SMP_CACHE_BYTES-1)/SMP_CACHE_BYTES)
162
163 #define SBMAC_MAX_TXDESCR       256
164 #define SBMAC_MAX_RXDESCR       256
165
166 #define ETHER_ADDR_LEN          6
167 #define ENET_PACKET_SIZE        1518
168 /*#define ENET_PACKET_SIZE      9216 */
169
170 /**********************************************************************
171  *  DMA Descriptor structure
172  ********************************************************************* */
173
174 struct sbdmadscr {
175         uint64_t  dscr_a;
176         uint64_t  dscr_b;
177 };
178
179 /**********************************************************************
180  *  DMA Controller structure
181  ********************************************************************* */
182
183 struct sbmacdma {
184
185         /*
186          * This stuff is used to identify the channel and the registers
187          * associated with it.
188          */
189         struct sbmac_softc      *sbdma_eth;     /* back pointer to associated
190                                                    MAC */
191         int                     sbdma_channel;  /* channel number */
192         int                     sbdma_txdir;    /* direction (1=transmit) */
193         int                     sbdma_maxdescr; /* total # of descriptors
194                                                    in ring */
195 #ifdef CONFIG_SBMAC_COALESCE
196         int                     sbdma_int_pktcnt;
197                                                 /* # descriptors rx/tx
198                                                    before interrupt */
199         int                     sbdma_int_timeout;
200                                                 /* # usec rx/tx interrupt */
201 #endif
202         void __iomem            *sbdma_config0; /* DMA config register 0 */
203         void __iomem            *sbdma_config1; /* DMA config register 1 */
204         void __iomem            *sbdma_dscrbase;
205                                                 /* descriptor base address */
206         void __iomem            *sbdma_dscrcnt; /* descriptor count register */
207         void __iomem            *sbdma_curdscr; /* current descriptor
208                                                    address */
209         void __iomem            *sbdma_oodpktlost;
210                                                 /* pkt drop (rx only) */
211
212         /*
213          * This stuff is for maintenance of the ring
214          */
215         void                    *sbdma_dscrtable_unaligned;
216         struct sbdmadscr        *sbdma_dscrtable;
217                                                 /* base of descriptor table */
218         struct sbdmadscr        *sbdma_dscrtable_end;
219                                                 /* end of descriptor table */
220         struct sk_buff          **sbdma_ctxtable;
221                                                 /* context table, one
222                                                    per descr */
223         dma_addr_t              sbdma_dscrtable_phys;
224                                                 /* and also the phys addr */
225         struct sbdmadscr        *sbdma_addptr;  /* next dscr for sw to add */
226         struct sbdmadscr        *sbdma_remptr;  /* next dscr for sw
227                                                    to remove */
228 };
229
230
231 /**********************************************************************
232  *  Ethernet softc structure
233  ********************************************************************* */
234
235 struct sbmac_softc {
236
237         /*
238          * Linux-specific things
239          */
240         struct net_device       *sbm_dev;       /* pointer to linux device */
241         struct napi_struct      napi;
242         struct phy_device       *phy_dev;       /* the associated PHY device */
243         struct mii_bus          *mii_bus;       /* the MII bus */
244         int                     phy_irq[PHY_MAX_ADDR];
245         spinlock_t              sbm_lock;       /* spin lock */
246         int                     sbm_devflags;   /* current device flags */
247
248         /*
249          * Controller-specific things
250          */
251         void __iomem            *sbm_base;      /* MAC's base address */
252         enum sbmac_state        sbm_state;      /* current state */
253
254         void __iomem            *sbm_macenable; /* MAC Enable Register */
255         void __iomem            *sbm_maccfg;    /* MAC Config Register */
256         void __iomem            *sbm_fifocfg;   /* FIFO Config Register */
257         void __iomem            *sbm_framecfg;  /* Frame Config Register */
258         void __iomem            *sbm_rxfilter;  /* Receive Filter Register */
259         void __iomem            *sbm_isr;       /* Interrupt Status Register */
260         void __iomem            *sbm_imr;       /* Interrupt Mask Register */
261         void __iomem            *sbm_mdio;      /* MDIO Register */
262
263         enum sbmac_speed        sbm_speed;      /* current speed */
264         enum sbmac_duplex       sbm_duplex;     /* current duplex */
265         enum sbmac_fc           sbm_fc;         /* cur. flow control setting */
266         int                     sbm_pause;      /* current pause setting */
267         int                     sbm_link;       /* current link state */
268
269         unsigned char           sbm_hwaddr[ETHER_ADDR_LEN];
270
271         struct sbmacdma         sbm_txdma;      /* only channel 0 for now */
272         struct sbmacdma         sbm_rxdma;
273         int                     rx_hw_checksum;
274         int                     sbe_idx;
275 };
276
277
278 /**********************************************************************
279  *  Externs
280  ********************************************************************* */
281
282 /**********************************************************************
283  *  Prototypes
284  ********************************************************************* */
285
286 static void sbdma_initctx(struct sbmacdma *d, struct sbmac_softc *s, int chan,
287                           int txrx, int maxdescr);
288 static void sbdma_channel_start(struct sbmacdma *d, int rxtx);
289 static int sbdma_add_rcvbuffer(struct sbmac_softc *sc, struct sbmacdma *d,
290                                struct sk_buff *m);
291 static int sbdma_add_txbuffer(struct sbmacdma *d, struct sk_buff *m);
292 static void sbdma_emptyring(struct sbmacdma *d);
293 static void sbdma_fillring(struct sbmac_softc *sc, struct sbmacdma *d);
294 static int sbdma_rx_process(struct sbmac_softc *sc, struct sbmacdma *d,
295                             int work_to_do, int poll);
296 static void sbdma_tx_process(struct sbmac_softc *sc, struct sbmacdma *d,
297                              int poll);
298 static int sbmac_initctx(struct sbmac_softc *s);
299 static void sbmac_channel_start(struct sbmac_softc *s);
300 static void sbmac_channel_stop(struct sbmac_softc *s);
301 static enum sbmac_state sbmac_set_channel_state(struct sbmac_softc *,
302                                                 enum sbmac_state);
303 static void sbmac_promiscuous_mode(struct sbmac_softc *sc, int onoff);
304 static uint64_t sbmac_addr2reg(unsigned char *ptr);
305 static irqreturn_t sbmac_intr(int irq, void *dev_instance);
306 static int sbmac_start_tx(struct sk_buff *skb, struct net_device *dev);
307 static void sbmac_setmulti(struct sbmac_softc *sc);
308 static int sbmac_init(struct platform_device *pldev, long long base);
309 static int sbmac_set_speed(struct sbmac_softc *s, enum sbmac_speed speed);
310 static int sbmac_set_duplex(struct sbmac_softc *s, enum sbmac_duplex duplex,
311                             enum sbmac_fc fc);
312
313 static int sbmac_open(struct net_device *dev);
314 static void sbmac_tx_timeout (struct net_device *dev);
315 static void sbmac_set_rx_mode(struct net_device *dev);
316 static int sbmac_mii_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
317 static int sbmac_close(struct net_device *dev);
318 static int sbmac_poll(struct napi_struct *napi, int budget);
319
320 static void sbmac_mii_poll(struct net_device *dev);
321 static int sbmac_mii_probe(struct net_device *dev);
322
323 static void sbmac_mii_sync(void __iomem *sbm_mdio);
324 static void sbmac_mii_senddata(void __iomem *sbm_mdio, unsigned int data,
325                                int bitcnt);
326 static int sbmac_mii_read(struct mii_bus *bus, int phyaddr, int regidx);
327 static int sbmac_mii_write(struct mii_bus *bus, int phyaddr, int regidx,
328                            u16 val);
329
330
331 /**********************************************************************
332  *  Globals
333  ********************************************************************* */
334
335 static char sbmac_string[] = "sb1250-mac";
336
337 static char sbmac_mdio_string[] = "sb1250-mac-mdio";
338
339
340 /**********************************************************************
341  *  MDIO constants
342  ********************************************************************* */
343
344 #define MII_COMMAND_START       0x01
345 #define MII_COMMAND_READ        0x02
346 #define MII_COMMAND_WRITE       0x01
347 #define MII_COMMAND_ACK         0x02
348
349 #define M_MAC_MDIO_DIR_OUTPUT   0               /* for clarity */
350
351 #define ENABLE          1
352 #define DISABLE         0
353
354 /**********************************************************************
355  *  SBMAC_MII_SYNC(sbm_mdio)
356  *
357  *  Synchronize with the MII - send a pattern of bits to the MII
358  *  that will guarantee that it is ready to accept a command.
359  *
360  *  Input parameters:
361  *         sbm_mdio - address of the MAC's MDIO register
362  *
363  *  Return value:
364  *         nothing
365  ********************************************************************* */
366
367 static void sbmac_mii_sync(void __iomem *sbm_mdio)
368 {
369         int cnt;
370         uint64_t bits;
371         int mac_mdio_genc;
372
373         mac_mdio_genc = __raw_readq(sbm_mdio) & M_MAC_GENC;
374
375         bits = M_MAC_MDIO_DIR_OUTPUT | M_MAC_MDIO_OUT;
376
377         __raw_writeq(bits | mac_mdio_genc, sbm_mdio);
378
379         for (cnt = 0; cnt < 32; cnt++) {
380                 __raw_writeq(bits | M_MAC_MDC | mac_mdio_genc, sbm_mdio);
381                 __raw_writeq(bits | mac_mdio_genc, sbm_mdio);
382         }
383 }
384
385 /**********************************************************************
386  *  SBMAC_MII_SENDDATA(sbm_mdio, data, bitcnt)
387  *
388  *  Send some bits to the MII.  The bits to be sent are right-
389  *  justified in the 'data' parameter.
390  *
391  *  Input parameters:
392  *         sbm_mdio - address of the MAC's MDIO register
393  *         data     - data to send
394  *         bitcnt   - number of bits to send
395  ********************************************************************* */
396
397 static void sbmac_mii_senddata(void __iomem *sbm_mdio, unsigned int data,
398                                int bitcnt)
399 {
400         int i;
401         uint64_t bits;
402         unsigned int curmask;
403         int mac_mdio_genc;
404
405         mac_mdio_genc = __raw_readq(sbm_mdio) & M_MAC_GENC;
406
407         bits = M_MAC_MDIO_DIR_OUTPUT;
408         __raw_writeq(bits | mac_mdio_genc, sbm_mdio);
409
410         curmask = 1 << (bitcnt - 1);
411
412         for (i = 0; i < bitcnt; i++) {
413                 if (data & curmask)
414                         bits |= M_MAC_MDIO_OUT;
415                 else bits &= ~M_MAC_MDIO_OUT;
416                 __raw_writeq(bits | mac_mdio_genc, sbm_mdio);
417                 __raw_writeq(bits | M_MAC_MDC | mac_mdio_genc, sbm_mdio);
418                 __raw_writeq(bits | mac_mdio_genc, sbm_mdio);
419                 curmask >>= 1;
420         }
421 }
422
423
424
425 /**********************************************************************
426  *  SBMAC_MII_READ(bus, phyaddr, regidx)
427  *  Read a PHY register.
428  *
429  *  Input parameters:
430  *         bus     - MDIO bus handle
431  *         phyaddr - PHY's address
432  *         regnum  - index of register to read
433  *
434  *  Return value:
435  *         value read, or 0xffff if an error occurred.
436  ********************************************************************* */
437
438 static int sbmac_mii_read(struct mii_bus *bus, int phyaddr, int regidx)
439 {
440         struct sbmac_softc *sc = (struct sbmac_softc *)bus->priv;
441         void __iomem *sbm_mdio = sc->sbm_mdio;
442         int idx;
443         int error;
444         int regval;
445         int mac_mdio_genc;
446
447         /*
448          * Synchronize ourselves so that the PHY knows the next
449          * thing coming down is a command
450          */
451         sbmac_mii_sync(sbm_mdio);
452
453         /*
454          * Send the data to the PHY.  The sequence is
455          * a "start" command (2 bits)
456          * a "read" command (2 bits)
457          * the PHY addr (5 bits)
458          * the register index (5 bits)
459          */
460         sbmac_mii_senddata(sbm_mdio, MII_COMMAND_START, 2);
461         sbmac_mii_senddata(sbm_mdio, MII_COMMAND_READ, 2);
462         sbmac_mii_senddata(sbm_mdio, phyaddr, 5);
463         sbmac_mii_senddata(sbm_mdio, regidx, 5);
464
465         mac_mdio_genc = __raw_readq(sbm_mdio) & M_MAC_GENC;
466
467         /*
468          * Switch the port around without a clock transition.
469          */
470         __raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, sbm_mdio);
471
472         /*
473          * Send out a clock pulse to signal we want the status
474          */
475         __raw_writeq(M_MAC_MDIO_DIR_INPUT | M_MAC_MDC | mac_mdio_genc,
476                      sbm_mdio);
477         __raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, sbm_mdio);
478
479         /*
480          * If an error occurred, the PHY will signal '1' back
481          */
482         error = __raw_readq(sbm_mdio) & M_MAC_MDIO_IN;
483
484         /*
485          * Issue an 'idle' clock pulse, but keep the direction
486          * the same.
487          */
488         __raw_writeq(M_MAC_MDIO_DIR_INPUT | M_MAC_MDC | mac_mdio_genc,
489                      sbm_mdio);
490         __raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, sbm_mdio);
491
492         regval = 0;
493
494         for (idx = 0; idx < 16; idx++) {
495                 regval <<= 1;
496
497                 if (error == 0) {
498                         if (__raw_readq(sbm_mdio) & M_MAC_MDIO_IN)
499                                 regval |= 1;
500                 }
501
502                 __raw_writeq(M_MAC_MDIO_DIR_INPUT | M_MAC_MDC | mac_mdio_genc,
503                              sbm_mdio);
504                 __raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, sbm_mdio);
505         }
506
507         /* Switch back to output */
508         __raw_writeq(M_MAC_MDIO_DIR_OUTPUT | mac_mdio_genc, sbm_mdio);
509
510         if (error == 0)
511                 return regval;
512         return 0xffff;
513 }
514
515
516 /**********************************************************************
517  *  SBMAC_MII_WRITE(bus, phyaddr, regidx, regval)
518  *
519  *  Write a value to a PHY register.
520  *
521  *  Input parameters:
522  *         bus     - MDIO bus handle
523  *         phyaddr - PHY to use
524  *         regidx  - register within the PHY
525  *         regval  - data to write to register
526  *
527  *  Return value:
528  *         0 for success
529  ********************************************************************* */
530
531 static int sbmac_mii_write(struct mii_bus *bus, int phyaddr, int regidx,
532                            u16 regval)
533 {
534         struct sbmac_softc *sc = (struct sbmac_softc *)bus->priv;
535         void __iomem *sbm_mdio = sc->sbm_mdio;
536         int mac_mdio_genc;
537
538         sbmac_mii_sync(sbm_mdio);
539
540         sbmac_mii_senddata(sbm_mdio, MII_COMMAND_START, 2);
541         sbmac_mii_senddata(sbm_mdio, MII_COMMAND_WRITE, 2);
542         sbmac_mii_senddata(sbm_mdio, phyaddr, 5);
543         sbmac_mii_senddata(sbm_mdio, regidx, 5);
544         sbmac_mii_senddata(sbm_mdio, MII_COMMAND_ACK, 2);
545         sbmac_mii_senddata(sbm_mdio, regval, 16);
546
547         mac_mdio_genc = __raw_readq(sbm_mdio) & M_MAC_GENC;
548
549         __raw_writeq(M_MAC_MDIO_DIR_OUTPUT | mac_mdio_genc, sbm_mdio);
550
551         return 0;
552 }
553
554
555
556 /**********************************************************************
557  *  SBDMA_INITCTX(d,s,chan,txrx,maxdescr)
558  *
559  *  Initialize a DMA channel context.  Since there are potentially
560  *  eight DMA channels per MAC, it's nice to do this in a standard
561  *  way.
562  *
563  *  Input parameters:
564  *         d - struct sbmacdma (DMA channel context)
565  *         s - struct sbmac_softc (pointer to a MAC)
566  *         chan - channel number (0..1 right now)
567  *         txrx - Identifies DMA_TX or DMA_RX for channel direction
568  *      maxdescr - number of descriptors
569  *
570  *  Return value:
571  *         nothing
572  ********************************************************************* */
573
574 static void sbdma_initctx(struct sbmacdma *d, struct sbmac_softc *s, int chan,
575                           int txrx, int maxdescr)
576 {
577 #ifdef CONFIG_SBMAC_COALESCE
578         int int_pktcnt, int_timeout;
579 #endif
580
581         /*
582          * Save away interesting stuff in the structure
583          */
584
585         d->sbdma_eth       = s;
586         d->sbdma_channel   = chan;
587         d->sbdma_txdir     = txrx;
588
589 #if 0
590         /* RMON clearing */
591         s->sbe_idx =(s->sbm_base - A_MAC_BASE_0)/MAC_SPACING;
592 #endif
593
594         __raw_writeq(0, s->sbm_base + R_MAC_RMON_TX_BYTES);
595         __raw_writeq(0, s->sbm_base + R_MAC_RMON_COLLISIONS);
596         __raw_writeq(0, s->sbm_base + R_MAC_RMON_LATE_COL);
597         __raw_writeq(0, s->sbm_base + R_MAC_RMON_EX_COL);
598         __raw_writeq(0, s->sbm_base + R_MAC_RMON_FCS_ERROR);
599         __raw_writeq(0, s->sbm_base + R_MAC_RMON_TX_ABORT);
600         __raw_writeq(0, s->sbm_base + R_MAC_RMON_TX_BAD);
601         __raw_writeq(0, s->sbm_base + R_MAC_RMON_TX_GOOD);
602         __raw_writeq(0, s->sbm_base + R_MAC_RMON_TX_RUNT);
603         __raw_writeq(0, s->sbm_base + R_MAC_RMON_TX_OVERSIZE);
604         __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_BYTES);
605         __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_MCAST);
606         __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_BCAST);
607         __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_BAD);
608         __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_GOOD);
609         __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_RUNT);
610         __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_OVERSIZE);
611         __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_FCS_ERROR);
612         __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_LENGTH_ERROR);
613         __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_CODE_ERROR);
614         __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_ALIGN_ERROR);
615
616         /*
617          * initialize register pointers
618          */
619
620         d->sbdma_config0 =
621                 s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_CONFIG0);
622         d->sbdma_config1 =
623                 s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_CONFIG1);
624         d->sbdma_dscrbase =
625                 s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_DSCR_BASE);
626         d->sbdma_dscrcnt =
627                 s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_DSCR_CNT);
628         d->sbdma_curdscr =
629                 s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_CUR_DSCRADDR);
630         if (d->sbdma_txdir)
631                 d->sbdma_oodpktlost = NULL;
632         else
633                 d->sbdma_oodpktlost =
634                         s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_OODPKTLOST_RX);
635
636         /*
637          * Allocate memory for the ring
638          */
639
640         d->sbdma_maxdescr = maxdescr;
641
642         d->sbdma_dscrtable_unaligned = kcalloc(d->sbdma_maxdescr + 1,
643                                                sizeof(*d->sbdma_dscrtable),
644                                                GFP_KERNEL);
645
646         /*
647          * The descriptor table must be aligned to at least 16 bytes or the
648          * MAC will corrupt it.
649          */
650         d->sbdma_dscrtable = (struct sbdmadscr *)
651                              ALIGN((unsigned long)d->sbdma_dscrtable_unaligned,
652                                    sizeof(*d->sbdma_dscrtable));
653
654         d->sbdma_dscrtable_end = d->sbdma_dscrtable + d->sbdma_maxdescr;
655
656         d->sbdma_dscrtable_phys = virt_to_phys(d->sbdma_dscrtable);
657
658         /*
659          * And context table
660          */
661
662         d->sbdma_ctxtable = kcalloc(d->sbdma_maxdescr,
663                                     sizeof(*d->sbdma_ctxtable), GFP_KERNEL);
664
665 #ifdef CONFIG_SBMAC_COALESCE
666         /*
667          * Setup Rx/Tx DMA coalescing defaults
668          */
669
670         int_pktcnt = (txrx == DMA_TX) ? int_pktcnt_tx : int_pktcnt_rx;
671         if ( int_pktcnt ) {
672                 d->sbdma_int_pktcnt = int_pktcnt;
673         } else {
674                 d->sbdma_int_pktcnt = 1;
675         }
676
677         int_timeout = (txrx == DMA_TX) ? int_timeout_tx : int_timeout_rx;
678         if ( int_timeout ) {
679                 d->sbdma_int_timeout = int_timeout;
680         } else {
681                 d->sbdma_int_timeout = 0;
682         }
683 #endif
684
685 }
686
687 /**********************************************************************
688  *  SBDMA_CHANNEL_START(d)
689  *
690  *  Initialize the hardware registers for a DMA channel.
691  *
692  *  Input parameters:
693  *         d - DMA channel to init (context must be previously init'd
694  *         rxtx - DMA_RX or DMA_TX depending on what type of channel
695  *
696  *  Return value:
697  *         nothing
698  ********************************************************************* */
699
700 static void sbdma_channel_start(struct sbmacdma *d, int rxtx)
701 {
702         /*
703          * Turn on the DMA channel
704          */
705
706 #ifdef CONFIG_SBMAC_COALESCE
707         __raw_writeq(V_DMA_INT_TIMEOUT(d->sbdma_int_timeout) |
708                        0, d->sbdma_config1);
709         __raw_writeq(M_DMA_EOP_INT_EN |
710                        V_DMA_RINGSZ(d->sbdma_maxdescr) |
711                        V_DMA_INT_PKTCNT(d->sbdma_int_pktcnt) |
712                        0, d->sbdma_config0);
713 #else
714         __raw_writeq(0, d->sbdma_config1);
715         __raw_writeq(V_DMA_RINGSZ(d->sbdma_maxdescr) |
716                        0, d->sbdma_config0);
717 #endif
718
719         __raw_writeq(d->sbdma_dscrtable_phys, d->sbdma_dscrbase);
720
721         /*
722          * Initialize ring pointers
723          */
724
725         d->sbdma_addptr = d->sbdma_dscrtable;
726         d->sbdma_remptr = d->sbdma_dscrtable;
727 }
728
729 /**********************************************************************
730  *  SBDMA_CHANNEL_STOP(d)
731  *
732  *  Initialize the hardware registers for a DMA channel.
733  *
734  *  Input parameters:
735  *         d - DMA channel to init (context must be previously init'd
736  *
737  *  Return value:
738  *         nothing
739  ********************************************************************* */
740
741 static void sbdma_channel_stop(struct sbmacdma *d)
742 {
743         /*
744          * Turn off the DMA channel
745          */
746
747         __raw_writeq(0, d->sbdma_config1);
748
749         __raw_writeq(0, d->sbdma_dscrbase);
750
751         __raw_writeq(0, d->sbdma_config0);
752
753         /*
754          * Zero ring pointers
755          */
756
757         d->sbdma_addptr = NULL;
758         d->sbdma_remptr = NULL;
759 }
760
761 static inline void sbdma_align_skb(struct sk_buff *skb,
762                                    unsigned int power2, unsigned int offset)
763 {
764         unsigned char *addr = skb->data;
765         unsigned char *newaddr = PTR_ALIGN(addr, power2);
766
767         skb_reserve(skb, newaddr - addr + offset);
768 }
769
770
771 /**********************************************************************
772  *  SBDMA_ADD_RCVBUFFER(d,sb)
773  *
774  *  Add a buffer to the specified DMA channel.   For receive channels,
775  *  this queues a buffer for inbound packets.
776  *
777  *  Input parameters:
778  *         sc - softc structure
779  *          d - DMA channel descriptor
780  *         sb - sk_buff to add, or NULL if we should allocate one
781  *
782  *  Return value:
783  *         0 if buffer could not be added (ring is full)
784  *         1 if buffer added successfully
785  ********************************************************************* */
786
787
788 static int sbdma_add_rcvbuffer(struct sbmac_softc *sc, struct sbmacdma *d,
789                                struct sk_buff *sb)
790 {
791         struct net_device *dev = sc->sbm_dev;
792         struct sbdmadscr *dsc;
793         struct sbdmadscr *nextdsc;
794         struct sk_buff *sb_new = NULL;
795         int pktsize = ENET_PACKET_SIZE;
796
797         /* get pointer to our current place in the ring */
798
799         dsc = d->sbdma_addptr;
800         nextdsc = SBDMA_NEXTBUF(d,sbdma_addptr);
801
802         /*
803          * figure out if the ring is full - if the next descriptor
804          * is the same as the one that we're going to remove from
805          * the ring, the ring is full
806          */
807
808         if (nextdsc == d->sbdma_remptr) {
809                 return -ENOSPC;
810         }
811
812         /*
813          * Allocate a sk_buff if we don't already have one.
814          * If we do have an sk_buff, reset it so that it's empty.
815          *
816          * Note: sk_buffs don't seem to be guaranteed to have any sort
817          * of alignment when they are allocated.  Therefore, allocate enough
818          * extra space to make sure that:
819          *
820          *    1. the data does not start in the middle of a cache line.
821          *    2. The data does not end in the middle of a cache line
822          *    3. The buffer can be aligned such that the IP addresses are
823          *       naturally aligned.
824          *
825          *  Remember, the SOCs MAC writes whole cache lines at a time,
826          *  without reading the old contents first.  So, if the sk_buff's
827          *  data portion starts in the middle of a cache line, the SOC
828          *  DMA will trash the beginning (and ending) portions.
829          */
830
831         if (sb == NULL) {
832                 sb_new = netdev_alloc_skb(dev, ENET_PACKET_SIZE +
833                                                SMP_CACHE_BYTES * 2 +
834                                                NET_IP_ALIGN);
835                 if (sb_new == NULL) {
836                         pr_info("%s: sk_buff allocation failed\n",
837                                d->sbdma_eth->sbm_dev->name);
838                         return -ENOBUFS;
839                 }
840
841                 sbdma_align_skb(sb_new, SMP_CACHE_BYTES, NET_IP_ALIGN);
842         }
843         else {
844                 sb_new = sb;
845                 /*
846                  * nothing special to reinit buffer, it's already aligned
847                  * and sb->data already points to a good place.
848                  */
849         }
850
851         /*
852          * fill in the descriptor
853          */
854
855 #ifdef CONFIG_SBMAC_COALESCE
856         /*
857          * Do not interrupt per DMA transfer.
858          */
859         dsc->dscr_a = virt_to_phys(sb_new->data) |
860                 V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize + NET_IP_ALIGN)) | 0;
861 #else
862         dsc->dscr_a = virt_to_phys(sb_new->data) |
863                 V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize + NET_IP_ALIGN)) |
864                 M_DMA_DSCRA_INTERRUPT;
865 #endif
866
867         /* receiving: no options */
868         dsc->dscr_b = 0;
869
870         /*
871          * fill in the context
872          */
873
874         d->sbdma_ctxtable[dsc-d->sbdma_dscrtable] = sb_new;
875
876         /*
877          * point at next packet
878          */
879
880         d->sbdma_addptr = nextdsc;
881
882         /*
883          * Give the buffer to the DMA engine.
884          */
885
886         __raw_writeq(1, d->sbdma_dscrcnt);
887
888         return 0;                                       /* we did it */
889 }
890
891 /**********************************************************************
892  *  SBDMA_ADD_TXBUFFER(d,sb)
893  *
894  *  Add a transmit buffer to the specified DMA channel, causing a
895  *  transmit to start.
896  *
897  *  Input parameters:
898  *         d - DMA channel descriptor
899  *         sb - sk_buff to add
900  *
901  *  Return value:
902  *         0 transmit queued successfully
903  *         otherwise error code
904  ********************************************************************* */
905
906
907 static int sbdma_add_txbuffer(struct sbmacdma *d, struct sk_buff *sb)
908 {
909         struct sbdmadscr *dsc;
910         struct sbdmadscr *nextdsc;
911         uint64_t phys;
912         uint64_t ncb;
913         int length;
914
915         /* get pointer to our current place in the ring */
916
917         dsc = d->sbdma_addptr;
918         nextdsc = SBDMA_NEXTBUF(d,sbdma_addptr);
919
920         /*
921          * figure out if the ring is full - if the next descriptor
922          * is the same as the one that we're going to remove from
923          * the ring, the ring is full
924          */
925
926         if (nextdsc == d->sbdma_remptr) {
927                 return -ENOSPC;
928         }
929
930         /*
931          * Under Linux, it's not necessary to copy/coalesce buffers
932          * like it is on NetBSD.  We think they're all contiguous,
933          * but that may not be true for GBE.
934          */
935
936         length = sb->len;
937
938         /*
939          * fill in the descriptor.  Note that the number of cache
940          * blocks in the descriptor is the number of blocks
941          * *spanned*, so we need to add in the offset (if any)
942          * while doing the calculation.
943          */
944
945         phys = virt_to_phys(sb->data);
946         ncb = NUMCACHEBLKS(length+(phys & (SMP_CACHE_BYTES - 1)));
947
948         dsc->dscr_a = phys |
949                 V_DMA_DSCRA_A_SIZE(ncb) |
950 #ifndef CONFIG_SBMAC_COALESCE
951                 M_DMA_DSCRA_INTERRUPT |
952 #endif
953                 M_DMA_ETHTX_SOP;
954
955         /* transmitting: set outbound options and length */
956
957         dsc->dscr_b = V_DMA_DSCRB_OPTIONS(K_DMA_ETHTX_APPENDCRC_APPENDPAD) |
958                 V_DMA_DSCRB_PKT_SIZE(length);
959
960         /*
961          * fill in the context
962          */
963
964         d->sbdma_ctxtable[dsc-d->sbdma_dscrtable] = sb;
965
966         /*
967          * point at next packet
968          */
969
970         d->sbdma_addptr = nextdsc;
971
972         /*
973          * Give the buffer to the DMA engine.
974          */
975
976         __raw_writeq(1, d->sbdma_dscrcnt);
977
978         return 0;                                       /* we did it */
979 }
980
981
982
983
984 /**********************************************************************
985  *  SBDMA_EMPTYRING(d)
986  *
987  *  Free all allocated sk_buffs on the specified DMA channel;
988  *
989  *  Input parameters:
990  *         d  - DMA channel
991  *
992  *  Return value:
993  *         nothing
994  ********************************************************************* */
995
996 static void sbdma_emptyring(struct sbmacdma *d)
997 {
998         int idx;
999         struct sk_buff *sb;
1000
1001         for (idx = 0; idx < d->sbdma_maxdescr; idx++) {
1002                 sb = d->sbdma_ctxtable[idx];
1003                 if (sb) {
1004                         dev_kfree_skb(sb);
1005                         d->sbdma_ctxtable[idx] = NULL;
1006                 }
1007         }
1008 }
1009
1010
1011 /**********************************************************************
1012  *  SBDMA_FILLRING(d)
1013  *
1014  *  Fill the specified DMA channel (must be receive channel)
1015  *  with sk_buffs
1016  *
1017  *  Input parameters:
1018  *         sc - softc structure
1019  *          d - DMA channel
1020  *
1021  *  Return value:
1022  *         nothing
1023  ********************************************************************* */
1024
1025 static void sbdma_fillring(struct sbmac_softc *sc, struct sbmacdma *d)
1026 {
1027         int idx;
1028
1029         for (idx = 0; idx < SBMAC_MAX_RXDESCR - 1; idx++) {
1030                 if (sbdma_add_rcvbuffer(sc, d, NULL) != 0)
1031                         break;
1032         }
1033 }
1034
1035 #ifdef CONFIG_NET_POLL_CONTROLLER
1036 static void sbmac_netpoll(struct net_device *netdev)
1037 {
1038         struct sbmac_softc *sc = netdev_priv(netdev);
1039         int irq = sc->sbm_dev->irq;
1040
1041         __raw_writeq(0, sc->sbm_imr);
1042
1043         sbmac_intr(irq, netdev);
1044
1045 #ifdef CONFIG_SBMAC_COALESCE
1046         __raw_writeq(((M_MAC_INT_EOP_COUNT | M_MAC_INT_EOP_TIMER) << S_MAC_TX_CH0) |
1047         ((M_MAC_INT_EOP_COUNT | M_MAC_INT_EOP_TIMER) << S_MAC_RX_CH0),
1048         sc->sbm_imr);
1049 #else
1050         __raw_writeq((M_MAC_INT_CHANNEL << S_MAC_TX_CH0) |
1051         (M_MAC_INT_CHANNEL << S_MAC_RX_CH0), sc->sbm_imr);
1052 #endif
1053 }
1054 #endif
1055
1056 /**********************************************************************
1057  *  SBDMA_RX_PROCESS(sc,d,work_to_do,poll)
1058  *
1059  *  Process "completed" receive buffers on the specified DMA channel.
1060  *
1061  *  Input parameters:
1062  *            sc - softc structure
1063  *             d - DMA channel context
1064  *    work_to_do - no. of packets to process before enabling interrupt
1065  *                 again (for NAPI)
1066  *          poll - 1: using polling (for NAPI)
1067  *
1068  *  Return value:
1069  *         nothing
1070  ********************************************************************* */
1071
1072 static int sbdma_rx_process(struct sbmac_softc *sc, struct sbmacdma *d,
1073                             int work_to_do, int poll)
1074 {
1075         struct net_device *dev = sc->sbm_dev;
1076         int curidx;
1077         int hwidx;
1078         struct sbdmadscr *dsc;
1079         struct sk_buff *sb;
1080         int len;
1081         int work_done = 0;
1082         int dropped = 0;
1083
1084         prefetch(d);
1085
1086 again:
1087         /* Check if the HW dropped any frames */
1088         dev->stats.rx_fifo_errors
1089             += __raw_readq(sc->sbm_rxdma.sbdma_oodpktlost) & 0xffff;
1090         __raw_writeq(0, sc->sbm_rxdma.sbdma_oodpktlost);
1091
1092         while (work_to_do-- > 0) {
1093                 /*
1094                  * figure out where we are (as an index) and where
1095                  * the hardware is (also as an index)
1096                  *
1097                  * This could be done faster if (for example) the
1098                  * descriptor table was page-aligned and contiguous in
1099                  * both virtual and physical memory -- you could then
1100                  * just compare the low-order bits of the virtual address
1101                  * (sbdma_remptr) and the physical address (sbdma_curdscr CSR)
1102                  */
1103
1104                 dsc = d->sbdma_remptr;
1105                 curidx = dsc - d->sbdma_dscrtable;
1106
1107                 prefetch(dsc);
1108                 prefetch(&d->sbdma_ctxtable[curidx]);
1109
1110                 hwidx = ((__raw_readq(d->sbdma_curdscr) & M_DMA_CURDSCR_ADDR) -
1111                          d->sbdma_dscrtable_phys) /
1112                         sizeof(*d->sbdma_dscrtable);
1113
1114                 /*
1115                  * If they're the same, that means we've processed all
1116                  * of the descriptors up to (but not including) the one that
1117                  * the hardware is working on right now.
1118                  */
1119
1120                 if (curidx == hwidx)
1121                         goto done;
1122
1123                 /*
1124                  * Otherwise, get the packet's sk_buff ptr back
1125                  */
1126
1127                 sb = d->sbdma_ctxtable[curidx];
1128                 d->sbdma_ctxtable[curidx] = NULL;
1129
1130                 len = (int)G_DMA_DSCRB_PKT_SIZE(dsc->dscr_b) - 4;
1131
1132                 /*
1133                  * Check packet status.  If good, process it.
1134                  * If not, silently drop it and put it back on the
1135                  * receive ring.
1136                  */
1137
1138                 if (likely (!(dsc->dscr_a & M_DMA_ETHRX_BAD))) {
1139
1140                         /*
1141                          * Add a new buffer to replace the old one.  If we fail
1142                          * to allocate a buffer, we're going to drop this
1143                          * packet and put it right back on the receive ring.
1144                          */
1145
1146                         if (unlikely(sbdma_add_rcvbuffer(sc, d, NULL) ==
1147                                      -ENOBUFS)) {
1148                                 dev->stats.rx_dropped++;
1149                                 /* Re-add old buffer */
1150                                 sbdma_add_rcvbuffer(sc, d, sb);
1151                                 /* No point in continuing at the moment */
1152                                 printk(KERN_ERR "dropped packet (1)\n");
1153                                 d->sbdma_remptr = SBDMA_NEXTBUF(d,sbdma_remptr);
1154                                 goto done;
1155                         } else {
1156                                 /*
1157                                  * Set length into the packet
1158                                  */
1159                                 skb_put(sb,len);
1160
1161                                 /*
1162                                  * Buffer has been replaced on the
1163                                  * receive ring.  Pass the buffer to
1164                                  * the kernel
1165                                  */
1166                                 sb->protocol = eth_type_trans(sb,d->sbdma_eth->sbm_dev);
1167                                 /* Check hw IPv4/TCP checksum if supported */
1168                                 if (sc->rx_hw_checksum == ENABLE) {
1169                                         if (!((dsc->dscr_a) & M_DMA_ETHRX_BADIP4CS) &&
1170                                             !((dsc->dscr_a) & M_DMA_ETHRX_BADTCPCS)) {
1171                                                 sb->ip_summed = CHECKSUM_UNNECESSARY;
1172                                                 /* don't need to set sb->csum */
1173                                         } else {
1174                                                 skb_checksum_none_assert(sb);
1175                                         }
1176                                 }
1177                                 prefetch(sb->data);
1178                                 prefetch((const void *)(((char *)sb->data)+32));
1179                                 if (poll)
1180                                         dropped = netif_receive_skb(sb);
1181                                 else
1182                                         dropped = netif_rx(sb);
1183
1184                                 if (dropped == NET_RX_DROP) {
1185                                         dev->stats.rx_dropped++;
1186                                         d->sbdma_remptr = SBDMA_NEXTBUF(d,sbdma_remptr);
1187                                         goto done;
1188                                 }
1189                                 else {
1190                                         dev->stats.rx_bytes += len;
1191                                         dev->stats.rx_packets++;
1192                                 }
1193                         }
1194                 } else {
1195                         /*
1196                          * Packet was mangled somehow.  Just drop it and
1197                          * put it back on the receive ring.
1198                          */
1199                         dev->stats.rx_errors++;
1200                         sbdma_add_rcvbuffer(sc, d, sb);
1201                 }
1202
1203
1204                 /*
1205                  * .. and advance to the next buffer.
1206                  */
1207
1208                 d->sbdma_remptr = SBDMA_NEXTBUF(d,sbdma_remptr);
1209                 work_done++;
1210         }
1211         if (!poll) {
1212                 work_to_do = 32;
1213                 goto again; /* collect fifo drop statistics again */
1214         }
1215 done:
1216         return work_done;
1217 }
1218
1219 /**********************************************************************
1220  *  SBDMA_TX_PROCESS(sc,d)
1221  *
1222  *  Process "completed" transmit buffers on the specified DMA channel.
1223  *  This is normally called within the interrupt service routine.
1224  *  Note that this isn't really ideal for priority channels, since
1225  *  it processes all of the packets on a given channel before
1226  *  returning.
1227  *
1228  *  Input parameters:
1229  *      sc - softc structure
1230  *       d - DMA channel context
1231  *    poll - 1: using polling (for NAPI)
1232  *
1233  *  Return value:
1234  *         nothing
1235  ********************************************************************* */
1236
1237 static void sbdma_tx_process(struct sbmac_softc *sc, struct sbmacdma *d,
1238                              int poll)
1239 {
1240         struct net_device *dev = sc->sbm_dev;
1241         int curidx;
1242         int hwidx;
1243         struct sbdmadscr *dsc;
1244         struct sk_buff *sb;
1245         unsigned long flags;
1246         int packets_handled = 0;
1247
1248         spin_lock_irqsave(&(sc->sbm_lock), flags);
1249
1250         if (d->sbdma_remptr == d->sbdma_addptr)
1251           goto end_unlock;
1252
1253         hwidx = ((__raw_readq(d->sbdma_curdscr) & M_DMA_CURDSCR_ADDR) -
1254                  d->sbdma_dscrtable_phys) / sizeof(*d->sbdma_dscrtable);
1255
1256         for (;;) {
1257                 /*
1258                  * figure out where we are (as an index) and where
1259                  * the hardware is (also as an index)
1260                  *
1261                  * This could be done faster if (for example) the
1262                  * descriptor table was page-aligned and contiguous in
1263                  * both virtual and physical memory -- you could then
1264                  * just compare the low-order bits of the virtual address
1265                  * (sbdma_remptr) and the physical address (sbdma_curdscr CSR)
1266                  */
1267
1268                 curidx = d->sbdma_remptr - d->sbdma_dscrtable;
1269
1270                 /*
1271                  * If they're the same, that means we've processed all
1272                  * of the descriptors up to (but not including) the one that
1273                  * the hardware is working on right now.
1274                  */
1275
1276                 if (curidx == hwidx)
1277                         break;
1278
1279                 /*
1280                  * Otherwise, get the packet's sk_buff ptr back
1281                  */
1282
1283                 dsc = &(d->sbdma_dscrtable[curidx]);
1284                 sb = d->sbdma_ctxtable[curidx];
1285                 d->sbdma_ctxtable[curidx] = NULL;
1286
1287                 /*
1288                  * Stats
1289                  */
1290
1291                 dev->stats.tx_bytes += sb->len;
1292                 dev->stats.tx_packets++;
1293
1294                 /*
1295                  * for transmits, we just free buffers.
1296                  */
1297
1298                 dev_kfree_skb_irq(sb);
1299
1300                 /*
1301                  * .. and advance to the next buffer.
1302                  */
1303
1304                 d->sbdma_remptr = SBDMA_NEXTBUF(d,sbdma_remptr);
1305
1306                 packets_handled++;
1307
1308         }
1309
1310         /*
1311          * Decide if we should wake up the protocol or not.
1312          * Other drivers seem to do this when we reach a low
1313          * watermark on the transmit queue.
1314          */
1315
1316         if (packets_handled)
1317                 netif_wake_queue(d->sbdma_eth->sbm_dev);
1318
1319 end_unlock:
1320         spin_unlock_irqrestore(&(sc->sbm_lock), flags);
1321
1322 }
1323
1324
1325
1326 /**********************************************************************
1327  *  SBMAC_INITCTX(s)
1328  *
1329  *  Initialize an Ethernet context structure - this is called
1330  *  once per MAC on the 1250.  Memory is allocated here, so don't
1331  *  call it again from inside the ioctl routines that bring the
1332  *  interface up/down
1333  *
1334  *  Input parameters:
1335  *         s - sbmac context structure
1336  *
1337  *  Return value:
1338  *         0
1339  ********************************************************************* */
1340
1341 static int sbmac_initctx(struct sbmac_softc *s)
1342 {
1343
1344         /*
1345          * figure out the addresses of some ports
1346          */
1347
1348         s->sbm_macenable = s->sbm_base + R_MAC_ENABLE;
1349         s->sbm_maccfg    = s->sbm_base + R_MAC_CFG;
1350         s->sbm_fifocfg   = s->sbm_base + R_MAC_THRSH_CFG;
1351         s->sbm_framecfg  = s->sbm_base + R_MAC_FRAMECFG;
1352         s->sbm_rxfilter  = s->sbm_base + R_MAC_ADFILTER_CFG;
1353         s->sbm_isr       = s->sbm_base + R_MAC_STATUS;
1354         s->sbm_imr       = s->sbm_base + R_MAC_INT_MASK;
1355         s->sbm_mdio      = s->sbm_base + R_MAC_MDIO;
1356
1357         /*
1358          * Initialize the DMA channels.  Right now, only one per MAC is used
1359          * Note: Only do this _once_, as it allocates memory from the kernel!
1360          */
1361
1362         sbdma_initctx(&(s->sbm_txdma),s,0,DMA_TX,SBMAC_MAX_TXDESCR);
1363         sbdma_initctx(&(s->sbm_rxdma),s,0,DMA_RX,SBMAC_MAX_RXDESCR);
1364
1365         /*
1366          * initial state is OFF
1367          */
1368
1369         s->sbm_state = sbmac_state_off;
1370
1371         return 0;
1372 }
1373
1374
1375 static void sbdma_uninitctx(struct sbmacdma *d)
1376 {
1377         if (d->sbdma_dscrtable_unaligned) {
1378                 kfree(d->sbdma_dscrtable_unaligned);
1379                 d->sbdma_dscrtable_unaligned = d->sbdma_dscrtable = NULL;
1380         }
1381
1382         if (d->sbdma_ctxtable) {
1383                 kfree(d->sbdma_ctxtable);
1384                 d->sbdma_ctxtable = NULL;
1385         }
1386 }
1387
1388
1389 static void sbmac_uninitctx(struct sbmac_softc *sc)
1390 {
1391         sbdma_uninitctx(&(sc->sbm_txdma));
1392         sbdma_uninitctx(&(sc->sbm_rxdma));
1393 }
1394
1395
1396 /**********************************************************************
1397  *  SBMAC_CHANNEL_START(s)
1398  *
1399  *  Start packet processing on this MAC.
1400  *
1401  *  Input parameters:
1402  *         s - sbmac structure
1403  *
1404  *  Return value:
1405  *         nothing
1406  ********************************************************************* */
1407
1408 static void sbmac_channel_start(struct sbmac_softc *s)
1409 {
1410         uint64_t reg;
1411         void __iomem *port;
1412         uint64_t cfg,fifo,framecfg;
1413         int idx, th_value;
1414
1415         /*
1416          * Don't do this if running
1417          */
1418
1419         if (s->sbm_state == sbmac_state_on)
1420                 return;
1421
1422         /*
1423          * Bring the controller out of reset, but leave it off.
1424          */
1425
1426         __raw_writeq(0, s->sbm_macenable);
1427
1428         /*
1429          * Ignore all received packets
1430          */
1431
1432         __raw_writeq(0, s->sbm_rxfilter);
1433
1434         /*
1435          * Calculate values for various control registers.
1436          */
1437
1438         cfg = M_MAC_RETRY_EN |
1439                 M_MAC_TX_HOLD_SOP_EN |
1440                 V_MAC_TX_PAUSE_CNT_16K |
1441                 M_MAC_AP_STAT_EN |
1442                 M_MAC_FAST_SYNC |
1443                 M_MAC_SS_EN |
1444                 0;
1445
1446         /*
1447          * Be sure that RD_THRSH+WR_THRSH <= 32 for pass1 pars
1448          * and make sure that RD_THRSH + WR_THRSH <=128 for pass2 and above
1449          * Use a larger RD_THRSH for gigabit
1450          */
1451         if (soc_type == K_SYS_SOC_TYPE_BCM1250 && periph_rev < 2)
1452                 th_value = 28;
1453         else
1454                 th_value = 64;
1455
1456         fifo = V_MAC_TX_WR_THRSH(4) |   /* Must be '4' or '8' */
1457                 ((s->sbm_speed == sbmac_speed_1000)
1458                  ? V_MAC_TX_RD_THRSH(th_value) : V_MAC_TX_RD_THRSH(4)) |
1459                 V_MAC_TX_RL_THRSH(4) |
1460                 V_MAC_RX_PL_THRSH(4) |
1461                 V_MAC_RX_RD_THRSH(4) |  /* Must be '4' */
1462                 V_MAC_RX_RL_THRSH(8) |
1463                 0;
1464
1465         framecfg = V_MAC_MIN_FRAMESZ_DEFAULT |
1466                 V_MAC_MAX_FRAMESZ_DEFAULT |
1467                 V_MAC_BACKOFF_SEL(1);
1468
1469         /*
1470          * Clear out the hash address map
1471          */
1472
1473         port = s->sbm_base + R_MAC_HASH_BASE;
1474         for (idx = 0; idx < MAC_HASH_COUNT; idx++) {
1475                 __raw_writeq(0, port);
1476                 port += sizeof(uint64_t);
1477         }
1478
1479         /*
1480          * Clear out the exact-match table
1481          */
1482
1483         port = s->sbm_base + R_MAC_ADDR_BASE;
1484         for (idx = 0; idx < MAC_ADDR_COUNT; idx++) {
1485                 __raw_writeq(0, port);
1486                 port += sizeof(uint64_t);
1487         }
1488
1489         /*
1490          * Clear out the DMA Channel mapping table registers
1491          */
1492
1493         port = s->sbm_base + R_MAC_CHUP0_BASE;
1494         for (idx = 0; idx < MAC_CHMAP_COUNT; idx++) {
1495                 __raw_writeq(0, port);
1496                 port += sizeof(uint64_t);
1497         }
1498
1499
1500         port = s->sbm_base + R_MAC_CHLO0_BASE;
1501         for (idx = 0; idx < MAC_CHMAP_COUNT; idx++) {
1502                 __raw_writeq(0, port);
1503                 port += sizeof(uint64_t);
1504         }
1505
1506         /*
1507          * Program the hardware address.  It goes into the hardware-address
1508          * register as well as the first filter register.
1509          */
1510
1511         reg = sbmac_addr2reg(s->sbm_hwaddr);
1512
1513         port = s->sbm_base + R_MAC_ADDR_BASE;
1514         __raw_writeq(reg, port);
1515         port = s->sbm_base + R_MAC_ETHERNET_ADDR;
1516
1517 #ifdef CONFIG_SB1_PASS_1_WORKAROUNDS
1518         /*
1519          * Pass1 SOCs do not receive packets addressed to the
1520          * destination address in the R_MAC_ETHERNET_ADDR register.
1521          * Set the value to zero.
1522          */
1523         __raw_writeq(0, port);
1524 #else
1525         __raw_writeq(reg, port);
1526 #endif
1527
1528         /*
1529          * Set the receive filter for no packets, and write values
1530          * to the various config registers
1531          */
1532
1533         __raw_writeq(0, s->sbm_rxfilter);
1534         __raw_writeq(0, s->sbm_imr);
1535         __raw_writeq(framecfg, s->sbm_framecfg);
1536         __raw_writeq(fifo, s->sbm_fifocfg);
1537         __raw_writeq(cfg, s->sbm_maccfg);
1538
1539         /*
1540          * Initialize DMA channels (rings should be ok now)
1541          */
1542
1543         sbdma_channel_start(&(s->sbm_rxdma), DMA_RX);
1544         sbdma_channel_start(&(s->sbm_txdma), DMA_TX);
1545
1546         /*
1547          * Configure the speed, duplex, and flow control
1548          */
1549
1550         sbmac_set_speed(s,s->sbm_speed);
1551         sbmac_set_duplex(s,s->sbm_duplex,s->sbm_fc);
1552
1553         /*
1554          * Fill the receive ring
1555          */
1556
1557         sbdma_fillring(s, &(s->sbm_rxdma));
1558
1559         /*
1560          * Turn on the rest of the bits in the enable register
1561          */
1562
1563 #if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
1564         __raw_writeq(M_MAC_RXDMA_EN0 |
1565                        M_MAC_TXDMA_EN0, s->sbm_macenable);
1566 #elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
1567         __raw_writeq(M_MAC_RXDMA_EN0 |
1568                        M_MAC_TXDMA_EN0 |
1569                        M_MAC_RX_ENABLE |
1570                        M_MAC_TX_ENABLE, s->sbm_macenable);
1571 #else
1572 #error invalid SiByte MAC configuration
1573 #endif
1574
1575 #ifdef CONFIG_SBMAC_COALESCE
1576         __raw_writeq(((M_MAC_INT_EOP_COUNT | M_MAC_INT_EOP_TIMER) << S_MAC_TX_CH0) |
1577                        ((M_MAC_INT_EOP_COUNT | M_MAC_INT_EOP_TIMER) << S_MAC_RX_CH0), s->sbm_imr);
1578 #else
1579         __raw_writeq((M_MAC_INT_CHANNEL << S_MAC_TX_CH0) |
1580                        (M_MAC_INT_CHANNEL << S_MAC_RX_CH0), s->sbm_imr);
1581 #endif
1582
1583         /*
1584          * Enable receiving unicasts and broadcasts
1585          */
1586
1587         __raw_writeq(M_MAC_UCAST_EN | M_MAC_BCAST_EN, s->sbm_rxfilter);
1588
1589         /*
1590          * we're running now.
1591          */
1592
1593         s->sbm_state = sbmac_state_on;
1594
1595         /*
1596          * Program multicast addresses
1597          */
1598
1599         sbmac_setmulti(s);
1600
1601         /*
1602          * If channel was in promiscuous mode before, turn that on
1603          */
1604
1605         if (s->sbm_devflags & IFF_PROMISC) {
1606                 sbmac_promiscuous_mode(s,1);
1607         }
1608
1609 }
1610
1611
1612 /**********************************************************************
1613  *  SBMAC_CHANNEL_STOP(s)
1614  *
1615  *  Stop packet processing on this MAC.
1616  *
1617  *  Input parameters:
1618  *         s - sbmac structure
1619  *
1620  *  Return value:
1621  *         nothing
1622  ********************************************************************* */
1623
1624 static void sbmac_channel_stop(struct sbmac_softc *s)
1625 {
1626         /* don't do this if already stopped */
1627
1628         if (s->sbm_state == sbmac_state_off)
1629                 return;
1630
1631         /* don't accept any packets, disable all interrupts */
1632
1633         __raw_writeq(0, s->sbm_rxfilter);
1634         __raw_writeq(0, s->sbm_imr);
1635
1636         /* Turn off ticker */
1637
1638         /* XXX */
1639
1640         /* turn off receiver and transmitter */
1641
1642         __raw_writeq(0, s->sbm_macenable);
1643
1644         /* We're stopped now. */
1645
1646         s->sbm_state = sbmac_state_off;
1647
1648         /*
1649          * Stop DMA channels (rings should be ok now)
1650          */
1651
1652         sbdma_channel_stop(&(s->sbm_rxdma));
1653         sbdma_channel_stop(&(s->sbm_txdma));
1654
1655         /* Empty the receive and transmit rings */
1656
1657         sbdma_emptyring(&(s->sbm_rxdma));
1658         sbdma_emptyring(&(s->sbm_txdma));
1659
1660 }
1661
1662 /**********************************************************************
1663  *  SBMAC_SET_CHANNEL_STATE(state)
1664  *
1665  *  Set the channel's state ON or OFF
1666  *
1667  *  Input parameters:
1668  *         state - new state
1669  *
1670  *  Return value:
1671  *         old state
1672  ********************************************************************* */
1673 static enum sbmac_state sbmac_set_channel_state(struct sbmac_softc *sc,
1674                                                 enum sbmac_state state)
1675 {
1676         enum sbmac_state oldstate = sc->sbm_state;
1677
1678         /*
1679          * If same as previous state, return
1680          */
1681
1682         if (state == oldstate) {
1683                 return oldstate;
1684         }
1685
1686         /*
1687          * If new state is ON, turn channel on
1688          */
1689
1690         if (state == sbmac_state_on) {
1691                 sbmac_channel_start(sc);
1692         }
1693         else {
1694                 sbmac_channel_stop(sc);
1695         }
1696
1697         /*
1698          * Return previous state
1699          */
1700
1701         return oldstate;
1702 }
1703
1704
1705 /**********************************************************************
1706  *  SBMAC_PROMISCUOUS_MODE(sc,onoff)
1707  *
1708  *  Turn on or off promiscuous mode
1709  *
1710  *  Input parameters:
1711  *         sc - softc
1712  *      onoff - 1 to turn on, 0 to turn off
1713  *
1714  *  Return value:
1715  *         nothing
1716  ********************************************************************* */
1717
1718 static void sbmac_promiscuous_mode(struct sbmac_softc *sc,int onoff)
1719 {
1720         uint64_t reg;
1721
1722         if (sc->sbm_state != sbmac_state_on)
1723                 return;
1724
1725         if (onoff) {
1726                 reg = __raw_readq(sc->sbm_rxfilter);
1727                 reg |= M_MAC_ALLPKT_EN;
1728                 __raw_writeq(reg, sc->sbm_rxfilter);
1729         }
1730         else {
1731                 reg = __raw_readq(sc->sbm_rxfilter);
1732                 reg &= ~M_MAC_ALLPKT_EN;
1733                 __raw_writeq(reg, sc->sbm_rxfilter);
1734         }
1735 }
1736
1737 /**********************************************************************
1738  *  SBMAC_SETIPHDR_OFFSET(sc,onoff)
1739  *
1740  *  Set the iphdr offset as 15 assuming ethernet encapsulation
1741  *
1742  *  Input parameters:
1743  *         sc - softc
1744  *
1745  *  Return value:
1746  *         nothing
1747  ********************************************************************* */
1748
1749 static void sbmac_set_iphdr_offset(struct sbmac_softc *sc)
1750 {
1751         uint64_t reg;
1752
1753         /* Hard code the off set to 15 for now */
1754         reg = __raw_readq(sc->sbm_rxfilter);
1755         reg &= ~M_MAC_IPHDR_OFFSET | V_MAC_IPHDR_OFFSET(15);
1756         __raw_writeq(reg, sc->sbm_rxfilter);
1757
1758         /* BCM1250 pass1 didn't have hardware checksum.  Everything
1759            later does.  */
1760         if (soc_type == K_SYS_SOC_TYPE_BCM1250 && periph_rev < 2) {
1761                 sc->rx_hw_checksum = DISABLE;
1762         } else {
1763                 sc->rx_hw_checksum = ENABLE;
1764         }
1765 }
1766
1767
1768 /**********************************************************************
1769  *  SBMAC_ADDR2REG(ptr)
1770  *
1771  *  Convert six bytes into the 64-bit register value that
1772  *  we typically write into the SBMAC's address/mcast registers
1773  *
1774  *  Input parameters:
1775  *         ptr - pointer to 6 bytes
1776  *
1777  *  Return value:
1778  *         register value
1779  ********************************************************************* */
1780
1781 static uint64_t sbmac_addr2reg(unsigned char *ptr)
1782 {
1783         uint64_t reg = 0;
1784
1785         ptr += 6;
1786
1787         reg |= (uint64_t) *(--ptr);
1788         reg <<= 8;
1789         reg |= (uint64_t) *(--ptr);
1790         reg <<= 8;
1791         reg |= (uint64_t) *(--ptr);
1792         reg <<= 8;
1793         reg |= (uint64_t) *(--ptr);
1794         reg <<= 8;
1795         reg |= (uint64_t) *(--ptr);
1796         reg <<= 8;
1797         reg |= (uint64_t) *(--ptr);
1798
1799         return reg;
1800 }
1801
1802
1803 /**********************************************************************
1804  *  SBMAC_SET_SPEED(s,speed)
1805  *
1806  *  Configure LAN speed for the specified MAC.
1807  *  Warning: must be called when MAC is off!
1808  *
1809  *  Input parameters:
1810  *         s - sbmac structure
1811  *         speed - speed to set MAC to (see enum sbmac_speed)
1812  *
1813  *  Return value:
1814  *         1 if successful
1815  *      0 indicates invalid parameters
1816  ********************************************************************* */
1817
1818 static int sbmac_set_speed(struct sbmac_softc *s, enum sbmac_speed speed)
1819 {
1820         uint64_t cfg;
1821         uint64_t framecfg;
1822
1823         /*
1824          * Save new current values
1825          */
1826
1827         s->sbm_speed = speed;
1828
1829         if (s->sbm_state == sbmac_state_on)
1830                 return 0;       /* save for next restart */
1831
1832         /*
1833          * Read current register values
1834          */
1835
1836         cfg = __raw_readq(s->sbm_maccfg);
1837         framecfg = __raw_readq(s->sbm_framecfg);
1838
1839         /*
1840          * Mask out the stuff we want to change
1841          */
1842
1843         cfg &= ~(M_MAC_BURST_EN | M_MAC_SPEED_SEL);
1844         framecfg &= ~(M_MAC_IFG_RX | M_MAC_IFG_TX | M_MAC_IFG_THRSH |
1845                       M_MAC_SLOT_SIZE);
1846
1847         /*
1848          * Now add in the new bits
1849          */
1850
1851         switch (speed) {
1852         case sbmac_speed_10:
1853                 framecfg |= V_MAC_IFG_RX_10 |
1854                         V_MAC_IFG_TX_10 |
1855                         K_MAC_IFG_THRSH_10 |
1856                         V_MAC_SLOT_SIZE_10;
1857                 cfg |= V_MAC_SPEED_SEL_10MBPS;
1858                 break;
1859
1860         case sbmac_speed_100:
1861                 framecfg |= V_MAC_IFG_RX_100 |
1862                         V_MAC_IFG_TX_100 |
1863                         V_MAC_IFG_THRSH_100 |
1864                         V_MAC_SLOT_SIZE_100;
1865                 cfg |= V_MAC_SPEED_SEL_100MBPS ;
1866                 break;
1867
1868         case sbmac_speed_1000:
1869                 framecfg |= V_MAC_IFG_RX_1000 |
1870                         V_MAC_IFG_TX_1000 |
1871                         V_MAC_IFG_THRSH_1000 |
1872                         V_MAC_SLOT_SIZE_1000;
1873                 cfg |= V_MAC_SPEED_SEL_1000MBPS | M_MAC_BURST_EN;
1874                 break;
1875
1876         default:
1877                 return 0;
1878         }
1879
1880         /*
1881          * Send the bits back to the hardware
1882          */
1883
1884         __raw_writeq(framecfg, s->sbm_framecfg);
1885         __raw_writeq(cfg, s->sbm_maccfg);
1886
1887         return 1;
1888 }
1889
1890 /**********************************************************************
1891  *  SBMAC_SET_DUPLEX(s,duplex,fc)
1892  *
1893  *  Set Ethernet duplex and flow control options for this MAC
1894  *  Warning: must be called when MAC is off!
1895  *
1896  *  Input parameters:
1897  *         s - sbmac structure
1898  *         duplex - duplex setting (see enum sbmac_duplex)
1899  *         fc - flow control setting (see enum sbmac_fc)
1900  *
1901  *  Return value:
1902  *         1 if ok
1903  *         0 if an invalid parameter combination was specified
1904  ********************************************************************* */
1905
1906 static int sbmac_set_duplex(struct sbmac_softc *s, enum sbmac_duplex duplex,
1907                             enum sbmac_fc fc)
1908 {
1909         uint64_t cfg;
1910
1911         /*
1912          * Save new current values
1913          */
1914
1915         s->sbm_duplex = duplex;
1916         s->sbm_fc = fc;
1917
1918         if (s->sbm_state == sbmac_state_on)
1919                 return 0;       /* save for next restart */
1920
1921         /*
1922          * Read current register values
1923          */
1924
1925         cfg = __raw_readq(s->sbm_maccfg);
1926
1927         /*
1928          * Mask off the stuff we're about to change
1929          */
1930
1931         cfg &= ~(M_MAC_FC_SEL | M_MAC_FC_CMD | M_MAC_HDX_EN);
1932
1933
1934         switch (duplex) {
1935         case sbmac_duplex_half:
1936                 switch (fc) {
1937                 case sbmac_fc_disabled:
1938                         cfg |= M_MAC_HDX_EN | V_MAC_FC_CMD_DISABLED;
1939                         break;
1940
1941                 case sbmac_fc_collision:
1942                         cfg |= M_MAC_HDX_EN | V_MAC_FC_CMD_ENABLED;
1943                         break;
1944
1945                 case sbmac_fc_carrier:
1946                         cfg |= M_MAC_HDX_EN | V_MAC_FC_CMD_ENAB_FALSECARR;
1947                         break;
1948
1949                 case sbmac_fc_frame:            /* not valid in half duplex */
1950                 default:                        /* invalid selection */
1951                         return 0;
1952                 }
1953                 break;
1954
1955         case sbmac_duplex_full:
1956                 switch (fc) {
1957                 case sbmac_fc_disabled:
1958                         cfg |= V_MAC_FC_CMD_DISABLED;
1959                         break;
1960
1961                 case sbmac_fc_frame:
1962                         cfg |= V_MAC_FC_CMD_ENABLED;
1963                         break;
1964
1965                 case sbmac_fc_collision:        /* not valid in full duplex */
1966                 case sbmac_fc_carrier:          /* not valid in full duplex */
1967                 default:
1968                         return 0;
1969                 }
1970                 break;
1971         default:
1972                 return 0;
1973         }
1974
1975         /*
1976          * Send the bits back to the hardware
1977          */
1978
1979         __raw_writeq(cfg, s->sbm_maccfg);
1980
1981         return 1;
1982 }
1983
1984
1985
1986
1987 /**********************************************************************
1988  *  SBMAC_INTR()
1989  *
1990  *  Interrupt handler for MAC interrupts
1991  *
1992  *  Input parameters:
1993  *         MAC structure
1994  *
1995  *  Return value:
1996  *         nothing
1997  ********************************************************************* */
1998 static irqreturn_t sbmac_intr(int irq,void *dev_instance)
1999 {
2000         struct net_device *dev = (struct net_device *) dev_instance;
2001         struct sbmac_softc *sc = netdev_priv(dev);
2002         uint64_t isr;
2003         int handled = 0;
2004
2005         /*
2006          * Read the ISR (this clears the bits in the real
2007          * register, except for counter addr)
2008          */
2009
2010         isr = __raw_readq(sc->sbm_isr) & ~M_MAC_COUNTER_ADDR;
2011
2012         if (isr == 0)
2013                 return IRQ_RETVAL(0);
2014         handled = 1;
2015
2016         /*
2017          * Transmits on channel 0
2018          */
2019
2020         if (isr & (M_MAC_INT_CHANNEL << S_MAC_TX_CH0))
2021                 sbdma_tx_process(sc,&(sc->sbm_txdma), 0);
2022
2023         if (isr & (M_MAC_INT_CHANNEL << S_MAC_RX_CH0)) {
2024                 if (napi_schedule_prep(&sc->napi)) {
2025                         __raw_writeq(0, sc->sbm_imr);
2026                         __napi_schedule(&sc->napi);
2027                         /* Depend on the exit from poll to reenable intr */
2028                 }
2029                 else {
2030                         /* may leave some packets behind */
2031                         sbdma_rx_process(sc,&(sc->sbm_rxdma),
2032                                          SBMAC_MAX_RXDESCR * 2, 0);
2033                 }
2034         }
2035         return IRQ_RETVAL(handled);
2036 }
2037
2038 /**********************************************************************
2039  *  SBMAC_START_TX(skb,dev)
2040  *
2041  *  Start output on the specified interface.  Basically, we
2042  *  queue as many buffers as we can until the ring fills up, or
2043  *  we run off the end of the queue, whichever comes first.
2044  *
2045  *  Input parameters:
2046  *
2047  *
2048  *  Return value:
2049  *         nothing
2050  ********************************************************************* */
2051 static int sbmac_start_tx(struct sk_buff *skb, struct net_device *dev)
2052 {
2053         struct sbmac_softc *sc = netdev_priv(dev);
2054         unsigned long flags;
2055
2056         /* lock eth irq */
2057         spin_lock_irqsave(&sc->sbm_lock, flags);
2058
2059         /*
2060          * Put the buffer on the transmit ring.  If we
2061          * don't have room, stop the queue.
2062          */
2063
2064         if (sbdma_add_txbuffer(&(sc->sbm_txdma),skb)) {
2065                 /* XXX save skb that we could not send */
2066                 netif_stop_queue(dev);
2067                 spin_unlock_irqrestore(&sc->sbm_lock, flags);
2068
2069                 return NETDEV_TX_BUSY;
2070         }
2071
2072         spin_unlock_irqrestore(&sc->sbm_lock, flags);
2073
2074         return NETDEV_TX_OK;
2075 }
2076
2077 /**********************************************************************
2078  *  SBMAC_SETMULTI(sc)
2079  *
2080  *  Reprogram the multicast table into the hardware, given
2081  *  the list of multicasts associated with the interface
2082  *  structure.
2083  *
2084  *  Input parameters:
2085  *         sc - softc
2086  *
2087  *  Return value:
2088  *         nothing
2089  ********************************************************************* */
2090
2091 static void sbmac_setmulti(struct sbmac_softc *sc)
2092 {
2093         uint64_t reg;
2094         void __iomem *port;
2095         int idx;
2096         struct netdev_hw_addr *ha;
2097         struct net_device *dev = sc->sbm_dev;
2098
2099         /*
2100          * Clear out entire multicast table.  We do this by nuking
2101          * the entire hash table and all the direct matches except
2102          * the first one, which is used for our station address
2103          */
2104
2105         for (idx = 1; idx < MAC_ADDR_COUNT; idx++) {
2106                 port = sc->sbm_base + R_MAC_ADDR_BASE+(idx*sizeof(uint64_t));
2107                 __raw_writeq(0, port);
2108         }
2109
2110         for (idx = 0; idx < MAC_HASH_COUNT; idx++) {
2111                 port = sc->sbm_base + R_MAC_HASH_BASE+(idx*sizeof(uint64_t));
2112                 __raw_writeq(0, port);
2113         }
2114
2115         /*
2116          * Clear the filter to say we don't want any multicasts.
2117          */
2118
2119         reg = __raw_readq(sc->sbm_rxfilter);
2120         reg &= ~(M_MAC_MCAST_INV | M_MAC_MCAST_EN);
2121         __raw_writeq(reg, sc->sbm_rxfilter);
2122
2123         if (dev->flags & IFF_ALLMULTI) {
2124                 /*
2125                  * Enable ALL multicasts.  Do this by inverting the
2126                  * multicast enable bit.
2127                  */
2128                 reg = __raw_readq(sc->sbm_rxfilter);
2129                 reg |= (M_MAC_MCAST_INV | M_MAC_MCAST_EN);
2130                 __raw_writeq(reg, sc->sbm_rxfilter);
2131                 return;
2132         }
2133
2134
2135         /*
2136          * Progam new multicast entries.  For now, only use the
2137          * perfect filter.  In the future we'll need to use the
2138          * hash filter if the perfect filter overflows
2139          */
2140
2141         /* XXX only using perfect filter for now, need to use hash
2142          * XXX if the table overflows */
2143
2144         idx = 1;                /* skip station address */
2145         netdev_for_each_mc_addr(ha, dev) {
2146                 if (idx == MAC_ADDR_COUNT)
2147                         break;
2148                 reg = sbmac_addr2reg(ha->addr);
2149                 port = sc->sbm_base + R_MAC_ADDR_BASE+(idx * sizeof(uint64_t));
2150                 __raw_writeq(reg, port);
2151                 idx++;
2152         }
2153
2154         /*
2155          * Enable the "accept multicast bits" if we programmed at least one
2156          * multicast.
2157          */
2158
2159         if (idx > 1) {
2160                 reg = __raw_readq(sc->sbm_rxfilter);
2161                 reg |= M_MAC_MCAST_EN;
2162                 __raw_writeq(reg, sc->sbm_rxfilter);
2163         }
2164 }
2165
2166 static int sb1250_change_mtu(struct net_device *_dev, int new_mtu)
2167 {
2168         if (new_mtu >  ENET_PACKET_SIZE)
2169                 return -EINVAL;
2170         _dev->mtu = new_mtu;
2171         pr_info("changing the mtu to %d\n", new_mtu);
2172         return 0;
2173 }
2174
2175 static const struct net_device_ops sbmac_netdev_ops = {
2176         .ndo_open               = sbmac_open,
2177         .ndo_stop               = sbmac_close,
2178         .ndo_start_xmit         = sbmac_start_tx,
2179         .ndo_set_rx_mode        = sbmac_set_rx_mode,
2180         .ndo_tx_timeout         = sbmac_tx_timeout,
2181         .ndo_do_ioctl           = sbmac_mii_ioctl,
2182         .ndo_change_mtu         = sb1250_change_mtu,
2183         .ndo_validate_addr      = eth_validate_addr,
2184         .ndo_set_mac_address    = eth_mac_addr,
2185 #ifdef CONFIG_NET_POLL_CONTROLLER
2186         .ndo_poll_controller    = sbmac_netpoll,
2187 #endif
2188 };
2189
2190 /**********************************************************************
2191  *  SBMAC_INIT(dev)
2192  *
2193  *  Attach routine - init hardware and hook ourselves into linux
2194  *
2195  *  Input parameters:
2196  *         dev - net_device structure
2197  *
2198  *  Return value:
2199  *         status
2200  ********************************************************************* */
2201
2202 static int sbmac_init(struct platform_device *pldev, long long base)
2203 {
2204         struct net_device *dev = dev_get_drvdata(&pldev->dev);
2205         int idx = pldev->id;
2206         struct sbmac_softc *sc = netdev_priv(dev);
2207         unsigned char *eaddr;
2208         uint64_t ea_reg;
2209         int i;
2210         int err;
2211
2212         sc->sbm_dev = dev;
2213         sc->sbe_idx = idx;
2214
2215         eaddr = sc->sbm_hwaddr;
2216
2217         /*
2218          * Read the ethernet address.  The firmware left this programmed
2219          * for us in the ethernet address register for each mac.
2220          */
2221
2222         ea_reg = __raw_readq(sc->sbm_base + R_MAC_ETHERNET_ADDR);
2223         __raw_writeq(0, sc->sbm_base + R_MAC_ETHERNET_ADDR);
2224         for (i = 0; i < 6; i++) {
2225                 eaddr[i] = (uint8_t) (ea_reg & 0xFF);
2226                 ea_reg >>= 8;
2227         }
2228
2229         for (i = 0; i < 6; i++) {
2230                 dev->dev_addr[i] = eaddr[i];
2231         }
2232
2233         /*
2234          * Initialize context (get pointers to registers and stuff), then
2235          * allocate the memory for the descriptor tables.
2236          */
2237
2238         sbmac_initctx(sc);
2239
2240         /*
2241          * Set up Linux device callins
2242          */
2243
2244         spin_lock_init(&(sc->sbm_lock));
2245
2246         dev->netdev_ops = &sbmac_netdev_ops;
2247         dev->watchdog_timeo = TX_TIMEOUT;
2248
2249         netif_napi_add(dev, &sc->napi, sbmac_poll, 16);
2250
2251         dev->irq                = UNIT_INT(idx);
2252
2253         /* This is needed for PASS2 for Rx H/W checksum feature */
2254         sbmac_set_iphdr_offset(sc);
2255
2256         sc->mii_bus = mdiobus_alloc();
2257         if (sc->mii_bus == NULL) {
2258                 err = -ENOMEM;
2259                 goto uninit_ctx;
2260         }
2261
2262         sc->mii_bus->name = sbmac_mdio_string;
2263         snprintf(sc->mii_bus->id, MII_BUS_ID_SIZE, "%x", idx);
2264         sc->mii_bus->priv = sc;
2265         sc->mii_bus->read = sbmac_mii_read;
2266         sc->mii_bus->write = sbmac_mii_write;
2267         sc->mii_bus->irq = sc->phy_irq;
2268         for (i = 0; i < PHY_MAX_ADDR; ++i)
2269                 sc->mii_bus->irq[i] = SBMAC_PHY_INT;
2270
2271         sc->mii_bus->parent = &pldev->dev;
2272         /*
2273          * Probe PHY address
2274          */
2275         err = mdiobus_register(sc->mii_bus);
2276         if (err) {
2277                 printk(KERN_ERR "%s: unable to register MDIO bus\n",
2278                        dev->name);
2279                 goto free_mdio;
2280         }
2281         dev_set_drvdata(&pldev->dev, sc->mii_bus);
2282
2283         err = register_netdev(dev);
2284         if (err) {
2285                 printk(KERN_ERR "%s.%d: unable to register netdev\n",
2286                        sbmac_string, idx);
2287                 goto unreg_mdio;
2288         }
2289
2290         pr_info("%s.%d: registered as %s\n", sbmac_string, idx, dev->name);
2291
2292         if (sc->rx_hw_checksum == ENABLE)
2293                 pr_info("%s: enabling TCP rcv checksum\n", dev->name);
2294
2295         /*
2296          * Display Ethernet address (this is called during the config
2297          * process so we need to finish off the config message that
2298          * was being displayed)
2299          */
2300         pr_info("%s: SiByte Ethernet at 0x%08Lx, address: %pM\n",
2301                dev->name, base, eaddr);
2302
2303         return 0;
2304 unreg_mdio:
2305         mdiobus_unregister(sc->mii_bus);
2306         dev_set_drvdata(&pldev->dev, NULL);
2307 free_mdio:
2308         mdiobus_free(sc->mii_bus);
2309 uninit_ctx:
2310         sbmac_uninitctx(sc);
2311         return err;
2312 }
2313
2314
2315 static int sbmac_open(struct net_device *dev)
2316 {
2317         struct sbmac_softc *sc = netdev_priv(dev);
2318         int err;
2319
2320         if (debug > 1)
2321                 pr_debug("%s: sbmac_open() irq %d.\n", dev->name, dev->irq);
2322
2323         /*
2324          * map/route interrupt (clear status first, in case something
2325          * weird is pending; we haven't initialized the mac registers
2326          * yet)
2327          */
2328
2329         __raw_readq(sc->sbm_isr);
2330         err = request_irq(dev->irq, sbmac_intr, IRQF_SHARED, dev->name, dev);
2331         if (err) {
2332                 printk(KERN_ERR "%s: unable to get IRQ %d\n", dev->name,
2333                        dev->irq);
2334                 goto out_err;
2335         }
2336
2337         sc->sbm_speed = sbmac_speed_none;
2338         sc->sbm_duplex = sbmac_duplex_none;
2339         sc->sbm_fc = sbmac_fc_none;
2340         sc->sbm_pause = -1;
2341         sc->sbm_link = 0;
2342
2343         /*
2344          * Attach to the PHY
2345          */
2346         err = sbmac_mii_probe(dev);
2347         if (err)
2348                 goto out_unregister;
2349
2350         /*
2351          * Turn on the channel
2352          */
2353
2354         sbmac_set_channel_state(sc,sbmac_state_on);
2355
2356         netif_start_queue(dev);
2357
2358         sbmac_set_rx_mode(dev);
2359
2360         phy_start(sc->phy_dev);
2361
2362         napi_enable(&sc->napi);
2363
2364         return 0;
2365
2366 out_unregister:
2367         free_irq(dev->irq, dev);
2368 out_err:
2369         return err;
2370 }
2371
2372 static int sbmac_mii_probe(struct net_device *dev)
2373 {
2374         struct sbmac_softc *sc = netdev_priv(dev);
2375         struct phy_device *phy_dev;
2376         int i;
2377
2378         for (i = 0; i < PHY_MAX_ADDR; i++) {
2379                 phy_dev = sc->mii_bus->phy_map[i];
2380                 if (phy_dev)
2381                         break;
2382         }
2383         if (!phy_dev) {
2384                 printk(KERN_ERR "%s: no PHY found\n", dev->name);
2385                 return -ENXIO;
2386         }
2387
2388         phy_dev = phy_connect(dev, dev_name(&phy_dev->dev), &sbmac_mii_poll, 0,
2389                               PHY_INTERFACE_MODE_GMII);
2390         if (IS_ERR(phy_dev)) {
2391                 printk(KERN_ERR "%s: could not attach to PHY\n", dev->name);
2392                 return PTR_ERR(phy_dev);
2393         }
2394
2395         /* Remove any features not supported by the controller */
2396         phy_dev->supported &= SUPPORTED_10baseT_Half |
2397                               SUPPORTED_10baseT_Full |
2398                               SUPPORTED_100baseT_Half |
2399                               SUPPORTED_100baseT_Full |
2400                               SUPPORTED_1000baseT_Half |
2401                               SUPPORTED_1000baseT_Full |
2402                               SUPPORTED_Autoneg |
2403                               SUPPORTED_MII |
2404                               SUPPORTED_Pause |
2405                               SUPPORTED_Asym_Pause;
2406         phy_dev->advertising = phy_dev->supported;
2407
2408         pr_info("%s: attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n",
2409                 dev->name, phy_dev->drv->name,
2410                 dev_name(&phy_dev->dev), phy_dev->irq);
2411
2412         sc->phy_dev = phy_dev;
2413
2414         return 0;
2415 }
2416
2417
2418 static void sbmac_mii_poll(struct net_device *dev)
2419 {
2420         struct sbmac_softc *sc = netdev_priv(dev);
2421         struct phy_device *phy_dev = sc->phy_dev;
2422         unsigned long flags;
2423         enum sbmac_fc fc;
2424         int link_chg, speed_chg, duplex_chg, pause_chg, fc_chg;
2425
2426         link_chg = (sc->sbm_link != phy_dev->link);
2427         speed_chg = (sc->sbm_speed != phy_dev->speed);
2428         duplex_chg = (sc->sbm_duplex != phy_dev->duplex);
2429         pause_chg = (sc->sbm_pause != phy_dev->pause);
2430
2431         if (!link_chg && !speed_chg && !duplex_chg && !pause_chg)
2432                 return;                                 /* Hmmm... */
2433
2434         if (!phy_dev->link) {
2435                 if (link_chg) {
2436                         sc->sbm_link = phy_dev->link;
2437                         sc->sbm_speed = sbmac_speed_none;
2438                         sc->sbm_duplex = sbmac_duplex_none;
2439                         sc->sbm_fc = sbmac_fc_disabled;
2440                         sc->sbm_pause = -1;
2441                         pr_info("%s: link unavailable\n", dev->name);
2442                 }
2443                 return;
2444         }
2445
2446         if (phy_dev->duplex == DUPLEX_FULL) {
2447                 if (phy_dev->pause)
2448                         fc = sbmac_fc_frame;
2449                 else
2450                         fc = sbmac_fc_disabled;
2451         } else
2452                 fc = sbmac_fc_collision;
2453         fc_chg = (sc->sbm_fc != fc);
2454
2455         pr_info("%s: link available: %dbase-%cD\n", dev->name, phy_dev->speed,
2456                 phy_dev->duplex == DUPLEX_FULL ? 'F' : 'H');
2457
2458         spin_lock_irqsave(&sc->sbm_lock, flags);
2459
2460         sc->sbm_speed = phy_dev->speed;
2461         sc->sbm_duplex = phy_dev->duplex;
2462         sc->sbm_fc = fc;
2463         sc->sbm_pause = phy_dev->pause;
2464         sc->sbm_link = phy_dev->link;
2465
2466         if ((speed_chg || duplex_chg || fc_chg) &&
2467             sc->sbm_state != sbmac_state_off) {
2468                 /*
2469                  * something changed, restart the channel
2470                  */
2471                 if (debug > 1)
2472                         pr_debug("%s: restarting channel "
2473                                  "because PHY state changed\n", dev->name);
2474                 sbmac_channel_stop(sc);
2475                 sbmac_channel_start(sc);
2476         }
2477
2478         spin_unlock_irqrestore(&sc->sbm_lock, flags);
2479 }
2480
2481
2482 static void sbmac_tx_timeout (struct net_device *dev)
2483 {
2484         struct sbmac_softc *sc = netdev_priv(dev);
2485         unsigned long flags;
2486
2487         spin_lock_irqsave(&sc->sbm_lock, flags);
2488
2489
2490         dev->trans_start = jiffies; /* prevent tx timeout */
2491         dev->stats.tx_errors++;
2492
2493         spin_unlock_irqrestore(&sc->sbm_lock, flags);
2494
2495         printk (KERN_WARNING "%s: Transmit timed out\n",dev->name);
2496 }
2497
2498
2499
2500
2501 static void sbmac_set_rx_mode(struct net_device *dev)
2502 {
2503         unsigned long flags;
2504         struct sbmac_softc *sc = netdev_priv(dev);
2505
2506         spin_lock_irqsave(&sc->sbm_lock, flags);
2507         if ((dev->flags ^ sc->sbm_devflags) & IFF_PROMISC) {
2508                 /*
2509                  * Promiscuous changed.
2510                  */
2511
2512                 if (dev->flags & IFF_PROMISC) {
2513                         sbmac_promiscuous_mode(sc,1);
2514                 }
2515                 else {
2516                         sbmac_promiscuous_mode(sc,0);
2517                 }
2518         }
2519         spin_unlock_irqrestore(&sc->sbm_lock, flags);
2520
2521         /*
2522          * Program the multicasts.  Do this every time.
2523          */
2524
2525         sbmac_setmulti(sc);
2526
2527 }
2528
2529 static int sbmac_mii_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
2530 {
2531         struct sbmac_softc *sc = netdev_priv(dev);
2532
2533         if (!netif_running(dev) || !sc->phy_dev)
2534                 return -EINVAL;
2535
2536         return phy_mii_ioctl(sc->phy_dev, rq, cmd);
2537 }
2538
2539 static int sbmac_close(struct net_device *dev)
2540 {
2541         struct sbmac_softc *sc = netdev_priv(dev);
2542
2543         napi_disable(&sc->napi);
2544
2545         phy_stop(sc->phy_dev);
2546
2547         sbmac_set_channel_state(sc, sbmac_state_off);
2548
2549         netif_stop_queue(dev);
2550
2551         if (debug > 1)
2552                 pr_debug("%s: Shutting down ethercard\n", dev->name);
2553
2554         phy_disconnect(sc->phy_dev);
2555         sc->phy_dev = NULL;
2556         free_irq(dev->irq, dev);
2557
2558         sbdma_emptyring(&(sc->sbm_txdma));
2559         sbdma_emptyring(&(sc->sbm_rxdma));
2560
2561         return 0;
2562 }
2563
2564 static int sbmac_poll(struct napi_struct *napi, int budget)
2565 {
2566         struct sbmac_softc *sc = container_of(napi, struct sbmac_softc, napi);
2567         int work_done;
2568
2569         work_done = sbdma_rx_process(sc, &(sc->sbm_rxdma), budget, 1);
2570         sbdma_tx_process(sc, &(sc->sbm_txdma), 1);
2571
2572         if (work_done < budget) {
2573                 napi_complete(napi);
2574
2575 #ifdef CONFIG_SBMAC_COALESCE
2576                 __raw_writeq(((M_MAC_INT_EOP_COUNT | M_MAC_INT_EOP_TIMER) << S_MAC_TX_CH0) |
2577                              ((M_MAC_INT_EOP_COUNT | M_MAC_INT_EOP_TIMER) << S_MAC_RX_CH0),
2578                              sc->sbm_imr);
2579 #else
2580                 __raw_writeq((M_MAC_INT_CHANNEL << S_MAC_TX_CH0) |
2581                              (M_MAC_INT_CHANNEL << S_MAC_RX_CH0), sc->sbm_imr);
2582 #endif
2583         }
2584
2585         return work_done;
2586 }
2587
2588
2589 static int __devinit sbmac_probe(struct platform_device *pldev)
2590 {
2591         struct net_device *dev;
2592         struct sbmac_softc *sc;
2593         void __iomem *sbm_base;
2594         struct resource *res;
2595         u64 sbmac_orig_hwaddr;
2596         int err;
2597
2598         res = platform_get_resource(pldev, IORESOURCE_MEM, 0);
2599         BUG_ON(!res);
2600         sbm_base = ioremap_nocache(res->start, resource_size(res));
2601         if (!sbm_base) {
2602                 printk(KERN_ERR "%s: unable to map device registers\n",
2603                        dev_name(&pldev->dev));
2604                 err = -ENOMEM;
2605                 goto out_out;
2606         }
2607
2608         /*
2609          * The R_MAC_ETHERNET_ADDR register will be set to some nonzero
2610          * value for us by the firmware if we're going to use this MAC.
2611          * If we find a zero, skip this MAC.
2612          */
2613         sbmac_orig_hwaddr = __raw_readq(sbm_base + R_MAC_ETHERNET_ADDR);
2614         pr_debug("%s: %sconfiguring MAC at 0x%08Lx\n", dev_name(&pldev->dev),
2615                  sbmac_orig_hwaddr ? "" : "not ", (long long)res->start);
2616         if (sbmac_orig_hwaddr == 0) {
2617                 err = 0;
2618                 goto out_unmap;
2619         }
2620
2621         /*
2622          * Okay, cool.  Initialize this MAC.
2623          */
2624         dev = alloc_etherdev(sizeof(struct sbmac_softc));
2625         if (!dev) {
2626                 printk(KERN_ERR "%s: unable to allocate etherdev\n",
2627                        dev_name(&pldev->dev));
2628                 err = -ENOMEM;
2629                 goto out_unmap;
2630         }
2631
2632         dev_set_drvdata(&pldev->dev, dev);
2633         SET_NETDEV_DEV(dev, &pldev->dev);
2634
2635         sc = netdev_priv(dev);
2636         sc->sbm_base = sbm_base;
2637
2638         err = sbmac_init(pldev, res->start);
2639         if (err)
2640                 goto out_kfree;
2641
2642         return 0;
2643
2644 out_kfree:
2645         free_netdev(dev);
2646         __raw_writeq(sbmac_orig_hwaddr, sbm_base + R_MAC_ETHERNET_ADDR);
2647
2648 out_unmap:
2649         iounmap(sbm_base);
2650
2651 out_out:
2652         return err;
2653 }
2654
2655 static int __exit sbmac_remove(struct platform_device *pldev)
2656 {
2657         struct net_device *dev = dev_get_drvdata(&pldev->dev);
2658         struct sbmac_softc *sc = netdev_priv(dev);
2659
2660         unregister_netdev(dev);
2661         sbmac_uninitctx(sc);
2662         mdiobus_unregister(sc->mii_bus);
2663         mdiobus_free(sc->mii_bus);
2664         iounmap(sc->sbm_base);
2665         free_netdev(dev);
2666
2667         return 0;
2668 }
2669
2670 static struct platform_driver sbmac_driver = {
2671         .probe = sbmac_probe,
2672         .remove = __exit_p(sbmac_remove),
2673         .driver = {
2674                 .name = sbmac_string,
2675                 .owner  = THIS_MODULE,
2676         },
2677 };
2678
2679 static int __init sbmac_init_module(void)
2680 {
2681         return platform_driver_register(&sbmac_driver);
2682 }
2683
2684 static void __exit sbmac_cleanup_module(void)
2685 {
2686         platform_driver_unregister(&sbmac_driver);
2687 }
2688
2689 module_init(sbmac_init_module);
2690 module_exit(sbmac_cleanup_module);