drivers/net/e1000/e1000_main.c

   1 /*******************************************************************************
   2
   3   Intel PRO/1000 Linux driver
   4   Copyright(c) 1999 - 2006 Intel Corporation.
   5
   6   This program is free software; you can redistribute it and/or modify it
   7   under the terms and conditions of the GNU General Public License,
   8   version 2, as published by the Free Software Foundation.
   9
  10   This program is distributed in the hope it will be useful, but WITHOUT
  11   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  12   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  13   more details.
  14
  15   You should have received a copy of the GNU General Public License along with
  16   this program; if not, write to the Free Software Foundation, Inc.,
  17   51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  18
  19   The full GNU General Public License is included in this distribution in
  20   the file called "COPYING".
  21
  22   Contact Information:
  23   Linux NICS <linux.nics@intel.com>
  24   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
  25   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  26
  27 *******************************************************************************/
  28
  29 #include "e1000.h"
  30
  31 char e1000_driver_name[] = "e1000";
  32 static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
  33 #ifndef CONFIG_E1000_NAPI
  34 #define DRIVERNAPI
  35 #else
  36 #define DRIVERNAPI "-NAPI"
  37 #endif
  38 #define DRV_VERSION "7.2.9-k4"DRIVERNAPI
  39 char e1000_driver_version[] = DRV_VERSION;
  40 static char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
  41
  42 /* e1000_pci_tbl - PCI Device ID Table
  43  *
  44  * Last entry must be all 0s
  45  *
  46  * Macro expands to...
  47  *   {PCI_DEVICE(PCI_VENDOR_ID_INTEL, device_id)}
  48  */
  49 static struct pci_device_id e1000_pci_tbl[] = {
  50         INTEL_E1000_ETHERNET_DEVICE(0x1000),
  51         INTEL_E1000_ETHERNET_DEVICE(0x1001),
  52         INTEL_E1000_ETHERNET_DEVICE(0x1004),
  53         INTEL_E1000_ETHERNET_DEVICE(0x1008),
  54         INTEL_E1000_ETHERNET_DEVICE(0x1009),
  55         INTEL_E1000_ETHERNET_DEVICE(0x100C),
  56         INTEL_E1000_ETHERNET_DEVICE(0x100D),
  57         INTEL_E1000_ETHERNET_DEVICE(0x100E),
  58         INTEL_E1000_ETHERNET_DEVICE(0x100F),
  59         INTEL_E1000_ETHERNET_DEVICE(0x1010),
  60         INTEL_E1000_ETHERNET_DEVICE(0x1011),
  61         INTEL_E1000_ETHERNET_DEVICE(0x1012),
  62         INTEL_E1000_ETHERNET_DEVICE(0x1013),
  63         INTEL_E1000_ETHERNET_DEVICE(0x1014),
  64         INTEL_E1000_ETHERNET_DEVICE(0x1015),
  65         INTEL_E1000_ETHERNET_DEVICE(0x1016),
  66         INTEL_E1000_ETHERNET_DEVICE(0x1017),
  67         INTEL_E1000_ETHERNET_DEVICE(0x1018),
  68         INTEL_E1000_ETHERNET_DEVICE(0x1019),
  69         INTEL_E1000_ETHERNET_DEVICE(0x101A),
  70         INTEL_E1000_ETHERNET_DEVICE(0x101D),
  71         INTEL_E1000_ETHERNET_DEVICE(0x101E),
  72         INTEL_E1000_ETHERNET_DEVICE(0x1026),
  73         INTEL_E1000_ETHERNET_DEVICE(0x1027),
  74         INTEL_E1000_ETHERNET_DEVICE(0x1028),
  75         INTEL_E1000_ETHERNET_DEVICE(0x1049),
  76         INTEL_E1000_ETHERNET_DEVICE(0x104A),
  77         INTEL_E1000_ETHERNET_DEVICE(0x104B),
  78         INTEL_E1000_ETHERNET_DEVICE(0x104C),
  79         INTEL_E1000_ETHERNET_DEVICE(0x104D),
  80         INTEL_E1000_ETHERNET_DEVICE(0x105E),
  81         INTEL_E1000_ETHERNET_DEVICE(0x105F),
  82         INTEL_E1000_ETHERNET_DEVICE(0x1060),
  83         INTEL_E1000_ETHERNET_DEVICE(0x1075),
  84         INTEL_E1000_ETHERNET_DEVICE(0x1076),
  85         INTEL_E1000_ETHERNET_DEVICE(0x1077),
  86         INTEL_E1000_ETHERNET_DEVICE(0x1078),
  87         INTEL_E1000_ETHERNET_DEVICE(0x1079),
  88         INTEL_E1000_ETHERNET_DEVICE(0x107A),
  89         INTEL_E1000_ETHERNET_DEVICE(0x107B),
  90         INTEL_E1000_ETHERNET_DEVICE(0x107C),
  91         INTEL_E1000_ETHERNET_DEVICE(0x107D),
  92         INTEL_E1000_ETHERNET_DEVICE(0x107E),
  93         INTEL_E1000_ETHERNET_DEVICE(0x107F),
  94         INTEL_E1000_ETHERNET_DEVICE(0x108A),
  95         INTEL_E1000_ETHERNET_DEVICE(0x108B),
  96         INTEL_E1000_ETHERNET_DEVICE(0x108C),
  97         INTEL_E1000_ETHERNET_DEVICE(0x1096),
  98         INTEL_E1000_ETHERNET_DEVICE(0x1098),
  99         INTEL_E1000_ETHERNET_DEVICE(0x1099),
 100         INTEL_E1000_ETHERNET_DEVICE(0x109A),
 101         INTEL_E1000_ETHERNET_DEVICE(0x10A4),
 102         INTEL_E1000_ETHERNET_DEVICE(0x10B5),
 103         INTEL_E1000_ETHERNET_DEVICE(0x10B9),
 104         INTEL_E1000_ETHERNET_DEVICE(0x10BA),
 105         INTEL_E1000_ETHERNET_DEVICE(0x10BB),
 106         /* required last entry */
 107         {0,}
 108 };
 109
 110 MODULE_DEVICE_TABLE(pci, e1000_pci_tbl);
 111
 112 int e1000_up(struct e1000_adapter *adapter);
 113 void e1000_down(struct e1000_adapter *adapter);
 114 void e1000_reinit_locked(struct e1000_adapter *adapter);
 115 void e1000_reset(struct e1000_adapter *adapter);
 116 int e1000_set_spd_dplx(struct e1000_adapter *adapter, uint16_t spddplx);
 117 int e1000_setup_all_tx_resources(struct e1000_adapter *adapter);
 118 int e1000_setup_all_rx_resources(struct e1000_adapter *adapter);
 119 void e1000_free_all_tx_resources(struct e1000_adapter *adapter);
 120 void e1000_free_all_rx_resources(struct e1000_adapter *adapter);
 121 static int e1000_setup_tx_resources(struct e1000_adapter *adapter,
 122                              struct e1000_tx_ring *txdr);
 123 static int e1000_setup_rx_resources(struct e1000_adapter *adapter,
 124                              struct e1000_rx_ring *rxdr);
 125 static void e1000_free_tx_resources(struct e1000_adapter *adapter,
 126                              struct e1000_tx_ring *tx_ring);
 127 static void e1000_free_rx_resources(struct e1000_adapter *adapter,
 128                              struct e1000_rx_ring *rx_ring);
 129 void e1000_update_stats(struct e1000_adapter *adapter);
 130
 131 static int e1000_init_module(void);
 132 static void e1000_exit_module(void);
 133 static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
 134 static void __devexit e1000_remove(struct pci_dev *pdev);
 135 static int e1000_alloc_queues(struct e1000_adapter *adapter);
 136 static int e1000_sw_init(struct e1000_adapter *adapter);
 137 static int e1000_open(struct net_device *netdev);
 138 static int e1000_close(struct net_device *netdev);
 139 static void e1000_configure_tx(struct e1000_adapter *adapter);
 140 static void e1000_configure_rx(struct e1000_adapter *adapter);
 141 static void e1000_setup_rctl(struct e1000_adapter *adapter);
 142 static void e1000_clean_all_tx_rings(struct e1000_adapter *adapter);
 143 static void e1000_clean_all_rx_rings(struct e1000_adapter *adapter);
 144 static void e1000_clean_tx_ring(struct e1000_adapter *adapter,
 145                                 struct e1000_tx_ring *tx_ring);
 146 static void e1000_clean_rx_ring(struct e1000_adapter *adapter,
 147                                 struct e1000_rx_ring *rx_ring);
 148 static void e1000_set_multi(struct net_device *netdev);
 149 static void e1000_update_phy_info(unsigned long data);
 150 static void e1000_watchdog(unsigned long data);
 151 static void e1000_82547_tx_fifo_stall(unsigned long data);
 152 static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev);
 153 static struct net_device_stats * e1000_get_stats(struct net_device *netdev);
 154 static int e1000_change_mtu(struct net_device *netdev, int new_mtu);
 155 static int e1000_set_mac(struct net_device *netdev, void *p);
 156 static irqreturn_t e1000_intr(int irq, void *data);
 157 static boolean_t e1000_clean_tx_irq(struct e1000_adapter *adapter,
 158                                     struct e1000_tx_ring *tx_ring);
 159 #ifdef CONFIG_E1000_NAPI
 160 static int e1000_clean(struct net_device *poll_dev, int *budget);
 161 static boolean_t e1000_clean_rx_irq(struct e1000_adapter *adapter,
 162                                     struct e1000_rx_ring *rx_ring,
 163                                     int *work_done, int work_to_do);
 164 static boolean_t e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
 165                                        struct e1000_rx_ring *rx_ring,
 166                                        int *work_done, int work_to_do);
 167 #else
 168 static boolean_t e1000_clean_rx_irq(struct e1000_adapter *adapter,
 169                                     struct e1000_rx_ring *rx_ring);
 170 static boolean_t e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
 171                                        struct e1000_rx_ring *rx_ring);
 172 #endif
 173 static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
 174                                    struct e1000_rx_ring *rx_ring,
 175                                    int cleaned_count);
 176 static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
 177                                       struct e1000_rx_ring *rx_ring,
 178                                       int cleaned_count);
 179 static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd);
 180 static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
 181                            int cmd);
 182 void e1000_set_ethtool_ops(struct net_device *netdev);
 183 static void e1000_enter_82542_rst(struct e1000_adapter *adapter);
 184 static void e1000_leave_82542_rst(struct e1000_adapter *adapter);
 185 static void e1000_tx_timeout(struct net_device *dev);
 186 static void e1000_reset_task(struct net_device *dev);
 187 static void e1000_smartspeed(struct e1000_adapter *adapter);
 188 static int e1000_82547_fifo_workaround(struct e1000_adapter *adapter,
 189                                        struct sk_buff *skb);
 190
 191 static void e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp);
 192 static void e1000_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid);
 193 static void e1000_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid);
 194 static void e1000_restore_vlan(struct e1000_adapter *adapter);
 195
 196 static int e1000_suspend(struct pci_dev *pdev, pm_message_t state);
 197 #ifdef CONFIG_PM
 198 static int e1000_resume(struct pci_dev *pdev);
 199 #endif
 200 static void e1000_shutdown(struct pci_dev *pdev);
 201
 202 #ifdef CONFIG_NET_POLL_CONTROLLER
 203 /* for netdump / net console */
 204 static void e1000_netpoll (struct net_device *netdev);
 205 #endif
 206
 207 extern void e1000_check_options(struct e1000_adapter *adapter);
 208
 209 static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
 210                      pci_channel_state_t state);
 211 static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev);
 212 static void e1000_io_resume(struct pci_dev *pdev);
 213
 214 static struct pci_error_handlers e1000_err_handler = {
 215         .error_detected = e1000_io_error_detected,
 216         .slot_reset = e1000_io_slot_reset,
 217         .resume = e1000_io_resume,
 218 };
 219
 220 static struct pci_driver e1000_driver = {
 221         .name     = e1000_driver_name,
 222         .id_table = e1000_pci_tbl,
 223         .probe    = e1000_probe,
 224         .remove   = __devexit_p(e1000_remove),
 225 #ifdef CONFIG_PM
 226         /* Power Managment Hooks */
 227         .suspend  = e1000_suspend,
 228         .resume   = e1000_resume,
 229 #endif
 230         .shutdown = e1000_shutdown,
 231         .err_handler = &e1000_err_handler
 232 };
 233
 234 MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
 235 MODULE_DESCRIPTION("Intel(R) PRO/1000 Network Driver");
 236 MODULE_LICENSE("GPL");
 237 MODULE_VERSION(DRV_VERSION);
 238
 239 static int debug = NETIF_MSG_DRV | NETIF_MSG_PROBE;
 240 module_param(debug, int, 0);
 241 MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
 242
 243 /**
 244  * e1000_init_module - Driver Registration Routine
 245  *
 246  * e1000_init_module is the first routine called when the driver is
 247  * loaded. All it does is register with the PCI subsystem.
 248  **/
 249
 250 static int __init
 251 e1000_init_module(void)
 252 {
 253         int ret;
 254         printk(KERN_INFO "%s - version %s\n",
 255                e1000_driver_string, e1000_driver_version);
 256
 257         printk(KERN_INFO "%s\n", e1000_copyright);
 258
 259         ret = pci_register_driver(&e1000_driver);
 260
 261         return ret;
 262 }
 263
 264 module_init(e1000_init_module);
 265
 266 /**
 267  * e1000_exit_module - Driver Exit Cleanup Routine
 268  *
 269  * e1000_exit_module is called just before the driver is removed
 270  * from memory.
 271  **/
 272
 273 static void __exit
 274 e1000_exit_module(void)
 275 {
 276         pci_unregister_driver(&e1000_driver);
 277 }
 278
 279 module_exit(e1000_exit_module);
 280
 281 static int e1000_request_irq(struct e1000_adapter *adapter)
 282 {
 283         struct net_device *netdev = adapter->netdev;
 284         int flags, err = 0;
 285
 286         flags = IRQF_SHARED;
 287 #ifdef CONFIG_PCI_MSI
 288         if (adapter->hw.mac_type > e1000_82547_rev_2) {
 289                 adapter->have_msi = TRUE;
 290                 if ((err = pci_enable_msi(adapter->pdev))) {
 291                         DPRINTK(PROBE, ERR,
 292                          "Unable to allocate MSI interrupt Error: %d\n", err);
 293                         adapter->have_msi = FALSE;
 294                 }
 295         }
 296         if (adapter->have_msi)
 297                 flags &= ~IRQF_SHARED;
 298 #endif
 299         if ((err = request_irq(adapter->pdev->irq, &e1000_intr, flags,
 300                                netdev->name, netdev)))
 301                 DPRINTK(PROBE, ERR,
 302                         "Unable to allocate interrupt Error: %d\n", err);
 303
 304         return err;
 305 }
 306
 307 static void e1000_free_irq(struct e1000_adapter *adapter)
 308 {
 309         struct net_device *netdev = adapter->netdev;
 310
 311         free_irq(adapter->pdev->irq, netdev);
 312
 313 #ifdef CONFIG_PCI_MSI
 314         if (adapter->have_msi)
 315                 pci_disable_msi(adapter->pdev);
 316 #endif
 317 }
 318
 319 /**
 320  * e1000_irq_disable - Mask off interrupt generation on the NIC
 321  * @adapter: board private structure
 322  **/
 323
 324 static void
 325 e1000_irq_disable(struct e1000_adapter *adapter)
 326 {
 327         atomic_inc(&adapter->irq_sem);
 328         E1000_WRITE_REG(&adapter->hw, IMC, ~0);
 329         E1000_WRITE_FLUSH(&adapter->hw);
 330         synchronize_irq(adapter->pdev->irq);
 331 }
 332
 333 /**
 334  * e1000_irq_enable - Enable default interrupt generation settings
 335  * @adapter: board private structure
 336  **/
 337
 338 static void
 339 e1000_irq_enable(struct e1000_adapter *adapter)
 340 {
 341         if (likely(atomic_dec_and_test(&adapter->irq_sem))) {
 342                 E1000_WRITE_REG(&adapter->hw, IMS, IMS_ENABLE_MASK);
 343                 E1000_WRITE_FLUSH(&adapter->hw);
 344         }
 345 }
 346
 347 static void
 348 e1000_update_mng_vlan(struct e1000_adapter *adapter)
 349 {
 350         struct net_device *netdev = adapter->netdev;
 351         uint16_t vid = adapter->hw.mng_cookie.vlan_id;
 352         uint16_t old_vid = adapter->mng_vlan_id;
 353         if (adapter->vlgrp) {
 354                 if (!adapter->vlgrp->vlan_devices[vid]) {
 355                         if (adapter->hw.mng_cookie.status &
 356                                 E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) {
 357                                 e1000_vlan_rx_add_vid(netdev, vid);
 358                                 adapter->mng_vlan_id = vid;
 359                         } else
 360                                 adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
 361
 362                         if ((old_vid != (uint16_t)E1000_MNG_VLAN_NONE) &&
 363                                         (vid != old_vid) &&
 364                                         !adapter->vlgrp->vlan_devices[old_vid])
 365                                 e1000_vlan_rx_kill_vid(netdev, old_vid);
 366                 } else
 367                         adapter->mng_vlan_id = vid;
 368         }
 369 }
 370
 371 /**
 372  * e1000_release_hw_control - release control of the h/w to f/w
 373  * @adapter: address of board private structure
 374  *
 375  * e1000_release_hw_control resets {CTRL_EXT|FWSM}:DRV_LOAD bit.
 376  * For ASF and Pass Through versions of f/w this means that the
 377  * driver is no longer loaded. For AMT version (only with 82573) i
 378  * of the f/w this means that the network i/f is closed.
 379  *
 380  **/
 381
 382 static void
 383 e1000_release_hw_control(struct e1000_adapter *adapter)
 384 {
 385         uint32_t ctrl_ext;
 386         uint32_t swsm;
 387         uint32_t extcnf;
 388
 389         /* Let firmware taken over control of h/w */
 390         switch (adapter->hw.mac_type) {
 391         case e1000_82571:
 392         case e1000_82572:
 393         case e1000_80003es2lan:
 394                 ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
 395                 E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
 396                                 ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
 397                 break;
 398         case e1000_82573:
 399                 swsm = E1000_READ_REG(&adapter->hw, SWSM);
 400                 E1000_WRITE_REG(&adapter->hw, SWSM,
 401                                 swsm & ~E1000_SWSM_DRV_LOAD);
 402         case e1000_ich8lan:
 403                 extcnf = E1000_READ_REG(&adapter->hw, CTRL_EXT);
 404                 E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
 405                                 extcnf & ~E1000_CTRL_EXT_DRV_LOAD);
 406                 break;
 407         default:
 408                 break;
 409         }
 410 }
 411
 412 /**
 413  * e1000_get_hw_control - get control of the h/w from f/w
 414  * @adapter: address of board private structure
 415  *
 416  * e1000_get_hw_control sets {CTRL_EXT|FWSM}:DRV_LOAD bit.
 417  * For ASF and Pass Through versions of f/w this means that
 418  * the driver is loaded. For AMT version (only with 82573)
 419  * of the f/w this means that the network i/f is open.
 420  *
 421  **/
 422
 423 static void
 424 e1000_get_hw_control(struct e1000_adapter *adapter)
 425 {
 426         uint32_t ctrl_ext;
 427         uint32_t swsm;
 428         uint32_t extcnf;
 429
 430         /* Let firmware know the driver has taken over */
 431         switch (adapter->hw.mac_type) {
 432         case e1000_82571:
 433         case e1000_82572:
 434         case e1000_80003es2lan:
 435                 ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
 436                 E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
 437                                 ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
 438                 break;
 439         case e1000_82573:
 440                 swsm = E1000_READ_REG(&adapter->hw, SWSM);
 441                 E1000_WRITE_REG(&adapter->hw, SWSM,
 442                                 swsm | E1000_SWSM_DRV_LOAD);
 443                 break;
 444         case e1000_ich8lan:
 445                 extcnf = E1000_READ_REG(&adapter->hw, EXTCNF_CTRL);
 446                 E1000_WRITE_REG(&adapter->hw, EXTCNF_CTRL,
 447                                 extcnf | E1000_EXTCNF_CTRL_SWFLAG);
 448                 break;
 449         default:
 450                 break;
 451         }
 452 }
 453
 454 int
 455 e1000_up(struct e1000_adapter *adapter)
 456 {
 457         struct net_device *netdev = adapter->netdev;
 458         int i;
 459
 460         /* hardware has been reset, we need to reload some things */
 461
 462         e1000_set_multi(netdev);
 463
 464         e1000_restore_vlan(adapter);
 465
 466         e1000_configure_tx(adapter);
 467         e1000_setup_rctl(adapter);
 468         e1000_configure_rx(adapter);
 469         /* call E1000_DESC_UNUSED which always leaves
 470          * at least 1 descriptor unused to make sure
 471          * next_to_use != next_to_clean */
 472         for (i = 0; i < adapter->num_rx_queues; i++) {
 473                 struct e1000_rx_ring *ring = &adapter->rx_ring[i];
 474                 adapter->alloc_rx_buf(adapter, ring,
 475                                       E1000_DESC_UNUSED(ring));
 476         }
 477
 478         adapter->tx_queue_len = netdev->tx_queue_len;
 479
 480 #ifdef CONFIG_E1000_NAPI
 481         netif_poll_enable(netdev);
 482 #endif
 483         e1000_irq_enable(adapter);
 484
 485         clear_bit(__E1000_DOWN, &adapter->flags);
 486
 487         mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ);
 488         return 0;
 489 }
 490
 491 /**
 492  * e1000_power_up_phy - restore link in case the phy was powered down
 493  * @adapter: address of board private structure
 494  *
 495  * The phy may be powered down to save power and turn off link when the
 496  * driver is unloaded and wake on lan is not enabled (among others)
 497  * *** this routine MUST be followed by a call to e1000_reset ***
 498  *
 499  **/
 500
 501 void e1000_power_up_phy(struct e1000_adapter *adapter)
 502 {
 503         uint16_t mii_reg = 0;
 504
 505         /* Just clear the power down bit to wake the phy back up */
 506         if (adapter->hw.media_type == e1000_media_type_copper) {
 507                 /* according to the manual, the phy will retain its
 508                  * settings across a power-down/up cycle */
 509                 e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg);
 510                 mii_reg &= ~MII_CR_POWER_DOWN;
 511                 e1000_write_phy_reg(&adapter->hw, PHY_CTRL, mii_reg);
 512         }
 513 }
 514
 515 static void e1000_power_down_phy(struct e1000_adapter *adapter)
 516 {
 517         /* Power down the PHY so no link is implied when interface is down *
 518          * The PHY cannot be powered down if any of the following is TRUE *
 519          * (a) WoL is enabled
 520          * (b) AMT is active
 521          * (c) SoL/IDER session is active */
 522         if (!adapter->wol && adapter->hw.mac_type >= e1000_82540 &&
 523            adapter->hw.media_type == e1000_media_type_copper) {
 524                 uint16_t mii_reg = 0;
 525
 526                 switch (adapter->hw.mac_type) {
 527                 case e1000_82540:
 528                 case e1000_82545:
 529                 case e1000_82545_rev_3:
 530                 case e1000_82546:
 531                 case e1000_82546_rev_3:
 532                 case e1000_82541:
 533                 case e1000_82541_rev_2:
 534                 case e1000_82547:
 535                 case e1000_82547_rev_2:
 536                         if (E1000_READ_REG(&adapter->hw, MANC) &
 537                             E1000_MANC_SMBUS_EN)
 538                                 goto out;
 539                         break;
 540                 case e1000_82571:
 541                 case e1000_82572:
 542                 case e1000_82573:
 543                 case e1000_80003es2lan:
 544                 case e1000_ich8lan:
 545                         if (e1000_check_mng_mode(&adapter->hw) ||
 546                             e1000_check_phy_reset_block(&adapter->hw))
 547                                 goto out;
 548                         break;
 549                 default:
 550                         goto out;
 551                 }
 552                 e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg);
 553                 mii_reg |= MII_CR_POWER_DOWN;
 554                 e1000_write_phy_reg(&adapter->hw, PHY_CTRL, mii_reg);
 555                 mdelay(1);
 556         }
 557 out:
 558         return;
 559 }
 560
 561 void
 562 e1000_down(struct e1000_adapter *adapter)
 563 {
 564         struct net_device *netdev = adapter->netdev;
 565
 566         /* signal that we're down so the interrupt handler does not
 567          * reschedule our watchdog timer */
 568         set_bit(__E1000_DOWN, &adapter->flags);
 569
 570         e1000_irq_disable(adapter);
 571
 572         del_timer_sync(&adapter->tx_fifo_stall_timer);
 573         del_timer_sync(&adapter->watchdog_timer);
 574         del_timer_sync(&adapter->phy_info_timer);
 575
 576 #ifdef CONFIG_E1000_NAPI
 577         netif_poll_disable(netdev);
 578 #endif
 579         netdev->tx_queue_len = adapter->tx_queue_len;
 580         adapter->link_speed = 0;
 581         adapter->link_duplex = 0;
 582         netif_carrier_off(netdev);
 583         netif_stop_queue(netdev);
 584
 585         e1000_reset(adapter);
 586         e1000_clean_all_tx_rings(adapter);
 587         e1000_clean_all_rx_rings(adapter);
 588 }
 589
 590 void
 591 e1000_reinit_locked(struct e1000_adapter *adapter)
 592 {
 593         WARN_ON(in_interrupt());
 594         while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
 595                 msleep(1);
 596         e1000_down(adapter);
 597         e1000_up(adapter);
 598         clear_bit(__E1000_RESETTING, &adapter->flags);
 599 }
 600
 601 void
 602 e1000_reset(struct e1000_adapter *adapter)
 603 {
 604         uint32_t pba, manc;
 605         uint16_t fc_high_water_mark = E1000_FC_HIGH_DIFF;
 606
 607         /* Repartition Pba for greater than 9k mtu
 608          * To take effect CTRL.RST is required.
 609          */
 610
 611         switch (adapter->hw.mac_type) {
 612         case e1000_82547:
 613         case e1000_82547_rev_2:
 614                 pba = E1000_PBA_30K;
 615                 break;
 616         case e1000_82571:
 617         case e1000_82572:
 618         case e1000_80003es2lan:
 619                 pba = E1000_PBA_38K;
 620                 break;
 621         case e1000_82573:
 622                 pba = E1000_PBA_12K;
 623                 break;
 624         case e1000_ich8lan:
 625                 pba = E1000_PBA_8K;
 626                 break;
 627         default:
 628                 pba = E1000_PBA_48K;
 629                 break;
 630         }
 631
 632         if ((adapter->hw.mac_type != e1000_82573) &&
 633            (adapter->netdev->mtu > E1000_RXBUFFER_8192))
 634                 pba -= 8; /* allocate more FIFO for Tx */
 635
 636
 637         if (adapter->hw.mac_type == e1000_82547) {
 638                 adapter->tx_fifo_head = 0;
 639                 adapter->tx_head_addr = pba << E1000_TX_HEAD_ADDR_SHIFT;
 640                 adapter->tx_fifo_size =
 641                         (E1000_PBA_40K - pba) << E1000_PBA_BYTES_SHIFT;
 642                 atomic_set(&adapter->tx_fifo_stall, 0);
 643         }
 644
 645         E1000_WRITE_REG(&adapter->hw, PBA, pba);
 646
 647         /* flow control settings */
 648         /* Set the FC high water mark to 90% of the FIFO size.
 649          * Required to clear last 3 LSB */
 650         fc_high_water_mark = ((pba * 9216)/10) & 0xFFF8;
 651         /* We can't use 90% on small FIFOs because the remainder
 652          * would be less than 1 full frame.  In this case, we size
 653          * it to allow at least a full frame above the high water
 654          *  mark. */
 655         if (pba < E1000_PBA_16K)
 656                 fc_high_water_mark = (pba * 1024) - 1600;
 657
 658         adapter->hw.fc_high_water = fc_high_water_mark;
 659         adapter->hw.fc_low_water = fc_high_water_mark - 8;
 660         if (adapter->hw.mac_type == e1000_80003es2lan)
 661                 adapter->hw.fc_pause_time = 0xFFFF;
 662         else
 663                 adapter->hw.fc_pause_time = E1000_FC_PAUSE_TIME;
 664         adapter->hw.fc_send_xon = 1;
 665         adapter->hw.fc = adapter->hw.original_fc;
 666
 667         /* Allow time for pending master requests to run */
 668         e1000_reset_hw(&adapter->hw);
 669         if (adapter->hw.mac_type >= e1000_82544)
 670                 E1000_WRITE_REG(&adapter->hw, WUC, 0);
 671
 672         if (e1000_init_hw(&adapter->hw))
 673                 DPRINTK(PROBE, ERR, "Hardware Error\n");
 674         e1000_update_mng_vlan(adapter);
 675         /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
 676         E1000_WRITE_REG(&adapter->hw, VET, ETHERNET_IEEE_VLAN_TYPE);
 677
 678         e1000_reset_adaptive(&adapter->hw);
 679         e1000_phy_get_info(&adapter->hw, &adapter->phy_info);
 680
 681         if (!adapter->smart_power_down &&
 682             (adapter->hw.mac_type == e1000_82571 ||
 683              adapter->hw.mac_type == e1000_82572)) {
 684                 uint16_t phy_data = 0;
 685                 /* speed up time to link by disabling smart power down, ignore
 686                  * the return value of this function because there is nothing
 687                  * different we would do if it failed */
 688                 e1000_read_phy_reg(&adapter->hw, IGP02E1000_PHY_POWER_MGMT,
 689                                    &phy_data);
 690                 phy_data &= ~IGP02E1000_PM_SPD;
 691                 e1000_write_phy_reg(&adapter->hw, IGP02E1000_PHY_POWER_MGMT,
 692                                     phy_data);
 693         }
 694
 695         if ((adapter->en_mng_pt) &&
 696             (adapter->hw.mac_type >= e1000_82540) &&
 697             (adapter->hw.mac_type < e1000_82571) &&
 698             (adapter->hw.media_type == e1000_media_type_copper)) {
 699                 manc = E1000_READ_REG(&adapter->hw, MANC);
 700                 manc |= (E1000_MANC_ARP_EN | E1000_MANC_EN_MNG2HOST);
 701                 E1000_WRITE_REG(&adapter->hw, MANC, manc);
 702         }
 703 }
 704
 705 /**
 706  * e1000_probe - Device Initialization Routine
 707  * @pdev: PCI device information struct
 708  * @ent: entry in e1000_pci_tbl
 709  *
 710  * Returns 0 on success, negative on failure
 711  *
 712  * e1000_probe initializes an adapter identified by a pci_dev structure.
 713  * The OS initialization, configuring of the adapter private structure,
 714  * and a hardware reset occur.
 715  **/
 716
 717 static int __devinit
 718 e1000_probe(struct pci_dev *pdev,
 719             const struct pci_device_id *ent)
 720 {
 721         struct net_device *netdev;
 722         struct e1000_adapter *adapter;
 723         unsigned long mmio_start, mmio_len;
 724         unsigned long flash_start, flash_len;
 725
 726         static int cards_found = 0;
 727         static int global_quad_port_a = 0; /* global ksp3 port a indication */
 728         int i, err, pci_using_dac;
 729         uint16_t eeprom_data = 0;
 730         uint16_t eeprom_apme_mask = E1000_EEPROM_APME;
 731         if ((err = pci_enable_device(pdev)))
 732                 return err;
 733
 734         if (!(err = pci_set_dma_mask(pdev, DMA_64BIT_MASK)) &&
 735             !(err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK))) {
 736                 pci_using_dac = 1;
 737         } else {
 738                 if ((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK)) &&
 739                     (err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK))) {
 740                         E1000_ERR("No usable DMA configuration, aborting\n");
 741                         goto err_dma;
 742                 }
 743                 pci_using_dac = 0;
 744         }
 745
 746         if ((err = pci_request_regions(pdev, e1000_driver_name)))
 747                 goto err_pci_reg;
 748
 749         pci_set_master(pdev);
 750
 751         err = -ENOMEM;
 752         netdev = alloc_etherdev(sizeof(struct e1000_adapter));
 753         if (!netdev)
 754                 goto err_alloc_etherdev;
 755
 756         SET_MODULE_OWNER(netdev);
 757         SET_NETDEV_DEV(netdev, &pdev->dev);
 758
 759         pci_set_drvdata(pdev, netdev);
 760         adapter = netdev_priv(netdev);
 761         adapter->netdev = netdev;
 762         adapter->pdev = pdev;
 763         adapter->hw.back = adapter;
 764         adapter->msg_enable = (1 << debug) - 1;
 765
 766         mmio_start = pci_resource_start(pdev, BAR_0);
 767         mmio_len = pci_resource_len(pdev, BAR_0);
 768
 769         err = -EIO;
 770         adapter->hw.hw_addr = ioremap(mmio_start, mmio_len);
 771         if (!adapter->hw.hw_addr)
 772                 goto err_ioremap;
 773
 774         for (i = BAR_1; i <= BAR_5; i++) {
 775                 if (pci_resource_len(pdev, i) == 0)
 776                         continue;
 777                 if (pci_resource_flags(pdev, i) & IORESOURCE_IO) {
 778                         adapter->hw.io_base = pci_resource_start(pdev, i);
 779                         break;
 780                 }
 781         }
 782
 783         netdev->open = &e1000_open;
 784         netdev->stop = &e1000_close;
 785         netdev->hard_start_xmit = &e1000_xmit_frame;
 786         netdev->get_stats = &e1000_get_stats;
 787         netdev->set_multicast_list = &e1000_set_multi;
 788         netdev->set_mac_address = &e1000_set_mac;
 789         netdev->change_mtu = &e1000_change_mtu;
 790         netdev->do_ioctl = &e1000_ioctl;
 791         e1000_set_ethtool_ops(netdev);
 792         netdev->tx_timeout = &e1000_tx_timeout;
 793         netdev->watchdog_timeo = 5 * HZ;
 794 #ifdef CONFIG_E1000_NAPI
 795         netdev->poll = &e1000_clean;
 796         netdev->weight = 64;
 797 #endif
 798         netdev->vlan_rx_register = e1000_vlan_rx_register;
 799         netdev->vlan_rx_add_vid = e1000_vlan_rx_add_vid;
 800         netdev->vlan_rx_kill_vid = e1000_vlan_rx_kill_vid;
 801 #ifdef CONFIG_NET_POLL_CONTROLLER
 802         netdev->poll_controller = e1000_netpoll;
 803 #endif
 804         strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
 805
 806         netdev->mem_start = mmio_start;
 807         netdev->mem_end = mmio_start + mmio_len;
 808         netdev->base_addr = adapter->hw.io_base;
 809
 810         adapter->bd_number = cards_found;
 811
 812         /* setup the private structure */
 813
 814         if ((err = e1000_sw_init(adapter)))
 815                 goto err_sw_init;
 816
 817         err = -EIO;
 818         /* Flash BAR mapping must happen after e1000_sw_init
 819          * because it depends on mac_type */
 820         if ((adapter->hw.mac_type == e1000_ich8lan) &&
 821            (pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) {
 822                 flash_start = pci_resource_start(pdev, 1);
 823                 flash_len = pci_resource_len(pdev, 1);
 824                 adapter->hw.flash_address = ioremap(flash_start, flash_len);
 825                 if (!adapter->hw.flash_address)
 826                         goto err_flashmap;
 827         }
 828
 829         if (e1000_check_phy_reset_block(&adapter->hw))
 830                 DPRINTK(PROBE, INFO, "PHY reset is blocked due to SOL/IDER session.\n");
 831
 832         if (adapter->hw.mac_type >= e1000_82543) {
 833                 netdev->features = NETIF_F_SG |
 834                                    NETIF_F_HW_CSUM |
 835                                    NETIF_F_HW_VLAN_TX |
 836                                    NETIF_F_HW_VLAN_RX |
 837                                    NETIF_F_HW_VLAN_FILTER;
 838                 if (adapter->hw.mac_type == e1000_ich8lan)
 839                         netdev->features &= ~NETIF_F_HW_VLAN_FILTER;
 840         }
 841
 842 #ifdef NETIF_F_TSO
 843         if ((adapter->hw.mac_type >= e1000_82544) &&
 844            (adapter->hw.mac_type != e1000_82547))
 845                 netdev->features |= NETIF_F_TSO;
 846
 847 #ifdef NETIF_F_TSO6
 848         if (adapter->hw.mac_type > e1000_82547_rev_2)
 849                 netdev->features |= NETIF_F_TSO6;
 850 #endif
 851 #endif
 852         if (pci_using_dac)
 853                 netdev->features |= NETIF_F_HIGHDMA;
 854
 855         netdev->features |= NETIF_F_LLTX;
 856
 857         adapter->en_mng_pt = e1000_enable_mng_pass_thru(&adapter->hw);
 858
 859         /* initialize eeprom parameters */
 860
 861         if (e1000_init_eeprom_params(&adapter->hw)) {
 862                 E1000_ERR("EEPROM initialization failed\n");
 863                 goto err_eeprom;
 864         }
 865
 866         /* before reading the EEPROM, reset the controller to
 867          * put the device in a known good starting state */
 868
 869         e1000_reset_hw(&adapter->hw);
 870
 871         /* make sure the EEPROM is good */
 872
 873         if (e1000_validate_eeprom_checksum(&adapter->hw) < 0) {
 874                 DPRINTK(PROBE, ERR, "The EEPROM Checksum Is Not Valid\n");
 875                 goto err_eeprom;
 876         }
 877
 878         /* copy the MAC address out of the EEPROM */
 879
 880         if (e1000_read_mac_addr(&adapter->hw))
 881                 DPRINTK(PROBE, ERR, "EEPROM Read Error\n");
 882         memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len);
 883         memcpy(netdev->perm_addr, adapter->hw.mac_addr, netdev->addr_len);
 884
 885         if (!is_valid_ether_addr(netdev->perm_addr)) {
 886                 DPRINTK(PROBE, ERR, "Invalid MAC Address\n");
 887                 goto err_eeprom;
 888         }
 889
 890         e1000_get_bus_info(&adapter->hw);
 891
 892         init_timer(&adapter->tx_fifo_stall_timer);
 893         adapter->tx_fifo_stall_timer.function = &e1000_82547_tx_fifo_stall;
 894         adapter->tx_fifo_stall_timer.data = (unsigned long) adapter;
 895
 896         init_timer(&adapter->watchdog_timer);
 897         adapter->watchdog_timer.function = &e1000_watchdog;
 898         adapter->watchdog_timer.data = (unsigned long) adapter;
 899
 900         init_timer(&adapter->phy_info_timer);
 901         adapter->phy_info_timer.function = &e1000_update_phy_info;
 902         adapter->phy_info_timer.data = (unsigned long) adapter;
 903
 904         INIT_WORK(&adapter->reset_task,
 905                 (void (*)(void *))e1000_reset_task, netdev);
 906
 907         e1000_check_options(adapter);
 908
 909         /* Initial Wake on LAN setting
 910          * If APM wake is enabled in the EEPROM,
 911          * enable the ACPI Magic Packet filter
 912          */
 913
 914         switch (adapter->hw.mac_type) {
 915         case e1000_82542_rev2_0:
 916         case e1000_82542_rev2_1:
 917         case e1000_82543:
 918                 break;
 919         case e1000_82544:
 920                 e1000_read_eeprom(&adapter->hw,
 921                         EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data);
 922                 eeprom_apme_mask = E1000_EEPROM_82544_APM;
 923                 break;
 924         case e1000_ich8lan:
 925                 e1000_read_eeprom(&adapter->hw,
 926                         EEPROM_INIT_CONTROL1_REG, 1, &eeprom_data);
 927                 eeprom_apme_mask = E1000_EEPROM_ICH8_APME;
 928                 break;
 929         case e1000_82546:
 930         case e1000_82546_rev_3:
 931         case e1000_82571:
 932         case e1000_80003es2lan:
 933                 if (E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_FUNC_1){
 934                         e1000_read_eeprom(&adapter->hw,
 935                                 EEPROM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
 936                         break;
 937                 }
 938                 /* Fall Through */
 939         default:
 940                 e1000_read_eeprom(&adapter->hw,
 941                         EEPROM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
 942                 break;
 943         }
 944         if (eeprom_data & eeprom_apme_mask)
 945                 adapter->eeprom_wol |= E1000_WUFC_MAG;
 946
 947         /* now that we have the eeprom settings, apply the special cases
 948          * where the eeprom may be wrong or the board simply won't support
 949          * wake on lan on a particular port */
 950         switch (pdev->device) {
 951         case E1000_DEV_ID_82546GB_PCIE:
 952                 adapter->eeprom_wol = 0;
 953                 break;
 954         case E1000_DEV_ID_82546EB_FIBER:
 955         case E1000_DEV_ID_82546GB_FIBER:
 956         case E1000_DEV_ID_82571EB_FIBER:
 957                 /* Wake events only supported on port A for dual fiber
 958                  * regardless of eeprom setting */
 959                 if (E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_FUNC_1)
 960                         adapter->eeprom_wol = 0;
 961                 break;
 962         case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
 963         case E1000_DEV_ID_82571EB_QUAD_COPPER:
 964                 /* if quad port adapter, disable WoL on all but port A */
 965                 if (global_quad_port_a != 0)
 966                         adapter->eeprom_wol = 0;
 967                 else
 968                         adapter->quad_port_a = 1;
 969                 /* Reset for multiple quad port adapters */
 970                 if (++global_quad_port_a == 4)
 971                         global_quad_port_a = 0;
 972                 break;
 973         }
 974
 975         /* initialize the wol settings based on the eeprom settings */
 976         adapter->wol = adapter->eeprom_wol;
 977
 978         /* print bus type/speed/width info */
 979         {
 980         struct e1000_hw *hw = &adapter->hw;
 981         DPRINTK(PROBE, INFO, "(PCI%s:%s:%s) ",
 982                 ((hw->bus_type == e1000_bus_type_pcix) ? "-X" :
 983                  (hw->bus_type == e1000_bus_type_pci_express ? " Express":"")),
 984                 ((hw->bus_speed == e1000_bus_speed_2500) ? "2.5Gb/s" :
 985                  (hw->bus_speed == e1000_bus_speed_133) ? "133MHz" :
 986                  (hw->bus_speed == e1000_bus_speed_120) ? "120MHz" :
 987                  (hw->bus_speed == e1000_bus_speed_100) ? "100MHz" :
 988                  (hw->bus_speed == e1000_bus_speed_66) ? "66MHz" : "33MHz"),
 989                 ((hw->bus_width == e1000_bus_width_64) ? "64-bit" :
 990                  (hw->bus_width == e1000_bus_width_pciex_4) ? "Width x4" :
 991                  (hw->bus_width == e1000_bus_width_pciex_1) ? "Width x1" :
 992                  "32-bit"));
 993         }
 994
 995         for (i = 0; i < 6; i++)
 996                 printk("%2.2x%c", netdev->dev_addr[i], i == 5 ? '\n' : ':');
 997
 998         /* reset the hardware with the new settings */
 999         e1000_reset(adapter);
1000
1001         /* If the controller is 82573 and f/w is AMT, do not set
1002          * DRV_LOAD until the interface is up.  For all other cases,
1003          * let the f/w know that the h/w is now under the control
1004          * of the driver. */
1005         if (adapter->hw.mac_type != e1000_82573 ||
1006             !e1000_check_mng_mode(&adapter->hw))
1007                 e1000_get_hw_control(adapter);
1008
1009         strcpy(netdev->name, "eth%d");
1010         if ((err = register_netdev(netdev)))
1011                 goto err_register;
1012
1013         /* tell the stack to leave us alone until e1000_open() is called */
1014         netif_carrier_off(netdev);
1015         netif_stop_queue(netdev);
1016
1017         DPRINTK(PROBE, INFO, "Intel(R) PRO/1000 Network Connection\n");
1018
1019         cards_found++;
1020         return 0;
1021
1022 err_register:
1023         e1000_release_hw_control(adapter);
1024 err_eeprom:
1025         if (!e1000_check_phy_reset_block(&adapter->hw))
1026                 e1000_phy_hw_reset(&adapter->hw);
1027
1028         if (adapter->hw.flash_address)
1029                 iounmap(adapter->hw.flash_address);
1030 err_flashmap:
1031 #ifdef CONFIG_E1000_NAPI
1032         for (i = 0; i < adapter->num_rx_queues; i++)
1033                 dev_put(&adapter->polling_netdev[i]);
1034 #endif
1035
1036         kfree(adapter->tx_ring);
1037         kfree(adapter->rx_ring);
1038 #ifdef CONFIG_E1000_NAPI
1039         kfree(adapter->polling_netdev);
1040 #endif
1041 err_sw_init:
1042         iounmap(adapter->hw.hw_addr);
1043 err_ioremap:
1044         free_netdev(netdev);
1045 err_alloc_etherdev:
1046         pci_release_regions(pdev);
1047 err_pci_reg:
1048 err_dma:
1049         pci_disable_device(pdev);
1050         return err;
1051 }
1052
1053 /**
1054  * e1000_remove - Device Removal Routine
1055  * @pdev: PCI device information struct
1056  *
1057  * e1000_remove is called by the PCI subsystem to alert the driver
1058  * that it should release a PCI device.  The could be caused by a
1059  * Hot-Plug event, or because the driver is going to be removed from
1060  * memory.
1061  **/
1062
1063 static void __devexit
1064 e1000_remove(struct pci_dev *pdev)
1065 {
1066         struct net_device *netdev = pci_get_drvdata(pdev);
1067         struct e1000_adapter *adapter = netdev_priv(netdev);
1068         uint32_t manc;
1069 #ifdef CONFIG_E1000_NAPI
1070         int i;
1071 #endif
1072
1073         flush_scheduled_work();
1074
1075         if (adapter->hw.mac_type >= e1000_82540 &&
1076             adapter->hw.mac_type < e1000_82571 &&
1077             adapter->hw.media_type == e1000_media_type_copper) {
1078                 manc = E1000_READ_REG(&adapter->hw, MANC);
1079                 if (manc & E1000_MANC_SMBUS_EN) {
1080                         manc |= E1000_MANC_ARP_EN;
1081                         E1000_WRITE_REG(&adapter->hw, MANC, manc);
1082                 }
1083         }
1084
1085         /* Release control of h/w to f/w.  If f/w is AMT enabled, this
1086          * would have already happened in close and is redundant. */
1087         e1000_release_hw_control(adapter);
1088
1089         unregister_netdev(netdev);
1090 #ifdef CONFIG_E1000_NAPI
1091         for (i = 0; i < adapter->num_rx_queues; i++)
1092                 dev_put(&adapter->polling_netdev[i]);
1093 #endif
1094
1095         if (!e1000_check_phy_reset_block(&adapter->hw))
1096                 e1000_phy_hw_reset(&adapter->hw);
1097
1098         kfree(adapter->tx_ring);
1099         kfree(adapter->rx_ring);
1100 #ifdef CONFIG_E1000_NAPI
1101         kfree(adapter->polling_netdev);
1102 #endif
1103
1104         iounmap(adapter->hw.hw_addr);
1105         if (adapter->hw.flash_address)
1106                 iounmap(adapter->hw.flash_address);
1107         pci_release_regions(pdev);
1108
1109         free_netdev(netdev);
1110
1111         pci_disable_device(pdev);
1112 }
1113
1114 /**
1115  * e1000_sw_init - Initialize general software structures (struct e1000_adapter)
1116  * @adapter: board private structure to initialize
1117  *
1118  * e1000_sw_init initializes the Adapter private data structure.
1119  * Fields are initialized based on PCI device information and
1120  * OS network device settings (MTU size).
1121  **/
1122
1123 static int __devinit
1124 e1000_sw_init(struct e1000_adapter *adapter)
1125 {
1126         struct e1000_hw *hw = &adapter->hw;
1127         struct net_device *netdev = adapter->netdev;
1128         struct pci_dev *pdev = adapter->pdev;
1129 #ifdef CONFIG_E1000_NAPI
1130         int i;
1131 #endif
1132
1133         /* PCI config space info */
1134
1135         hw->vendor_id = pdev->vendor;
1136         hw->device_id = pdev->device;
1137         hw->subsystem_vendor_id = pdev->subsystem_vendor;
1138         hw->subsystem_id = pdev->subsystem_device;
1139
1140         pci_read_config_byte(pdev, PCI_REVISION_ID, &hw->revision_id);
1141
1142         pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word);
1143
1144         adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
1145         adapter->rx_ps_bsize0 = E1000_RXBUFFER_128;
1146         hw->max_frame_size = netdev->mtu +
1147                              ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
1148         hw->min_frame_size = MINIMUM_ETHERNET_FRAME_SIZE;
1149
1150         /* identify the MAC */
1151
1152         if (e1000_set_mac_type(hw)) {
1153                 DPRINTK(PROBE, ERR, "Unknown MAC Type\n");
1154                 return -EIO;
1155         }
1156
1157         switch (hw->mac_type) {
1158         default:
1159                 break;
1160         case e1000_82541:
1161         case e1000_82547:
1162         case e1000_82541_rev_2:
1163         case e1000_82547_rev_2:
1164                 hw->phy_init_script = 1;
1165                 break;
1166         }
1167
1168         e1000_set_media_type(hw);
1169
1170         hw->wait_autoneg_complete = FALSE;
1171         hw->tbi_compatibility_en = TRUE;
1172         hw->adaptive_ifs = TRUE;
1173
1174         /* Copper options */
1175
1176         if (hw->media_type == e1000_media_type_copper) {
1177                 hw->mdix = AUTO_ALL_MODES;
1178                 hw->disable_polarity_correction = FALSE;
1179                 hw->master_slave = E1000_MASTER_SLAVE;
1180         }
1181
1182         adapter->num_tx_queues = 1;
1183         adapter->num_rx_queues = 1;
1184
1185         if (e1000_alloc_queues(adapter)) {
1186                 DPRINTK(PROBE, ERR, "Unable to allocate memory for queues\n");
1187                 return -ENOMEM;
1188         }
1189
1190 #ifdef CONFIG_E1000_NAPI
1191         for (i = 0; i < adapter->num_rx_queues; i++) {
1192                 adapter->polling_netdev[i].priv = adapter;
1193                 adapter->polling_netdev[i].poll = &e1000_clean;
1194                 adapter->polling_netdev[i].weight = 64;
1195                 dev_hold(&adapter->polling_netdev[i]);
1196                 set_bit(__LINK_STATE_START, &adapter->polling_netdev[i].state);
1197         }
1198         spin_lock_init(&adapter->tx_queue_lock);
1199 #endif
1200
1201         atomic_set(&adapter->irq_sem, 1);
1202         spin_lock_init(&adapter->stats_lock);
1203
1204         set_bit(__E1000_DOWN, &adapter->flags);
1205
1206         return 0;
1207 }
1208
1209 /**
1210  * e1000_alloc_queues - Allocate memory for all rings
1211  * @adapter: board private structure to initialize
1212  *
1213  * We allocate one ring per queue at run-time since we don't know the
1214  * number of queues at compile-time.  The polling_netdev array is
1215  * intended for Multiqueue, but should work fine with a single queue.
1216  **/
1217
1218 static int __devinit
1219 e1000_alloc_queues(struct e1000_adapter *adapter)
1220 {
1221         int size;
1222
1223         size = sizeof(struct e1000_tx_ring) * adapter->num_tx_queues;
1224         adapter->tx_ring = kmalloc(size, GFP_KERNEL);
1225         if (!adapter->tx_ring)
1226                 return -ENOMEM;
1227         memset(adapter->tx_ring, 0, size);
1228
1229         size = sizeof(struct e1000_rx_ring) * adapter->num_rx_queues;
1230         adapter->rx_ring = kmalloc(size, GFP_KERNEL);
1231         if (!adapter->rx_ring) {
1232                 kfree(adapter->tx_ring);
1233                 return -ENOMEM;
1234         }
1235         memset(adapter->rx_ring, 0, size);
1236
1237 #ifdef CONFIG_E1000_NAPI
1238         size = sizeof(struct net_device) * adapter->num_rx_queues;
1239         adapter->polling_netdev = kmalloc(size, GFP_KERNEL);
1240         if (!adapter->polling_netdev) {
1241                 kfree(adapter->tx_ring);
1242                 kfree(adapter->rx_ring);
1243                 return -ENOMEM;
1244         }
1245         memset(adapter->polling_netdev, 0, size);
1246 #endif
1247
1248         return E1000_SUCCESS;
1249 }
1250
1251 /**
1252  * e1000_open - Called when a network interface is made active
1253  * @netdev: network interface device structure
1254  *
1255  * Returns 0 on success, negative value on failure
1256  *
1257  * The open entry point is called when a network interface is made
1258  * active by the system (IFF_UP).  At this point all resources needed
1259  * for transmit and receive operations are allocated, the interrupt
1260  * handler is registered with the OS, the watchdog timer is started,
1261  * and the stack is notified that the interface is ready.
1262  **/
1263
1264 static int
1265 e1000_open(struct net_device *netdev)
1266 {
1267         struct e1000_adapter *adapter = netdev_priv(netdev);
1268         int err;
1269
1270         /* disallow open during test */
1271         if (test_bit(__E1000_TESTING, &adapter->flags))
1272                 return -EBUSY;
1273
1274         /* allocate transmit descriptors */
1275         if ((err = e1000_setup_all_tx_resources(adapter)))
1276                 goto err_setup_tx;
1277
1278         /* allocate receive descriptors */
1279         if ((err = e1000_setup_all_rx_resources(adapter)))
1280                 goto err_setup_rx;
1281
1282         err = e1000_request_irq(adapter);
1283         if (err)
1284                 goto err_req_irq;
1285
1286         e1000_power_up_phy(adapter);
1287
1288         if ((err = e1000_up(adapter)))
1289                 goto err_up;
1290         adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
1291         if ((adapter->hw.mng_cookie.status &
1292                           E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) {
1293                 e1000_update_mng_vlan(adapter);
1294         }
1295
1296         /* If AMT is enabled, let the firmware know that the network
1297          * interface is now open */
1298         if (adapter->hw.mac_type == e1000_82573 &&
1299             e1000_check_mng_mode(&adapter->hw))
1300                 e1000_get_hw_control(adapter);
1301
1302         return E1000_SUCCESS;
1303
1304 err_up:
1305         e1000_power_down_phy(adapter);
1306         e1000_free_irq(adapter);
1307 err_req_irq:
1308         e1000_free_all_rx_resources(adapter);
1309 err_setup_rx:
1310         e1000_free_all_tx_resources(adapter);
1311 err_setup_tx:
1312         e1000_reset(adapter);
1313
1314         return err;
1315 }
1316
1317 /**
1318  * e1000_close - Disables a network interface
1319  * @netdev: network interface device structure
1320  *
1321  * Returns 0, this is not allowed to fail
1322  *
1323  * The close entry point is called when an interface is de-activated
1324  * by the OS.  The hardware is still under the drivers control, but
1325  * needs to be disabled.  A global MAC reset is issued to stop the
1326  * hardware, and all transmit and receive resources are freed.
1327  **/
1328
1329 static int
1330 e1000_close(struct net_device *netdev)
1331 {
1332         struct e1000_adapter *adapter = netdev_priv(netdev);
1333
1334         WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
1335         e1000_down(adapter);
1336         e1000_power_down_phy(adapter);
1337         e1000_free_irq(adapter);
1338
1339         e1000_free_all_tx_resources(adapter);
1340         e1000_free_all_rx_resources(adapter);
1341
1342         /* kill manageability vlan ID if supported, but not if a vlan with
1343          * the same ID is registered on the host OS (let 8021q kill it) */
1344         if ((adapter->hw.mng_cookie.status &
1345                           E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
1346              !(adapter->vlgrp &&
1347                           adapter->vlgrp->vlan_devices[adapter->mng_vlan_id])) {
1348                 e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
1349         }
1350
1351         /* If AMT is enabled, let the firmware know that the network
1352          * interface is now closed */
1353         if (adapter->hw.mac_type == e1000_82573 &&
1354             e1000_check_mng_mode(&adapter->hw))
1355                 e1000_release_hw_control(adapter);
1356
1357         return 0;
1358 }
1359
1360 /**
1361  * e1000_check_64k_bound - check that memory doesn't cross 64kB boundary
1362  * @adapter: address of board private structure
1363  * @start: address of beginning of memory
1364  * @len: length of memory
1365  **/
1366 static boolean_t
1367 e1000_check_64k_bound(struct e1000_adapter *adapter,
1368                       void *start, unsigned long len)
1369 {
1370         unsigned long begin = (unsigned long) start;
1371         unsigned long end = begin + len;
1372
1373         /* First rev 82545 and 82546 need to not allow any memory
1374          * write location to cross 64k boundary due to errata 23 */
1375         if (adapter->hw.mac_type == e1000_82545 ||
1376             adapter->hw.mac_type == e1000_82546) {
1377                 return ((begin ^ (end - 1)) >> 16) != 0 ? FALSE : TRUE;
1378         }
1379
1380         return TRUE;
1381 }
1382
1383 /**
1384  * e1000_setup_tx_resources - allocate Tx resources (Descriptors)
1385  * @adapter: board private structure
1386  * @txdr:    tx descriptor ring (for a specific queue) to setup
1387  *
1388  * Return 0 on success, negative on failure
1389  **/
1390
1391 static int
1392 e1000_setup_tx_resources(struct e1000_adapter *adapter,
1393                          struct e1000_tx_ring *txdr)
1394 {
1395         struct pci_dev *pdev = adapter->pdev;
1396         int size;
1397
1398         size = sizeof(struct e1000_buffer) * txdr->count;
1399         txdr->buffer_info = vmalloc(size);
1400         if (!txdr->buffer_info) {
1401                 DPRINTK(PROBE, ERR,
1402                 "Unable to allocate memory for the transmit descriptor ring\n");
1403                 return -ENOMEM;
1404         }
1405         memset(txdr->buffer_info, 0, size);
1406
1407         /* round up to nearest 4K */
1408
1409         txdr->size = txdr->count * sizeof(struct e1000_tx_desc);
1410         E1000_ROUNDUP(txdr->size, 4096);
1411
1412         txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
1413         if (!txdr->desc) {
1414 setup_tx_desc_die:
1415                 vfree(txdr->buffer_info);
1416                 DPRINTK(PROBE, ERR,
1417                 "Unable to allocate memory for the transmit descriptor ring\n");
1418                 return -ENOMEM;
1419         }
1420
1421         /* Fix for errata 23, can't cross 64kB boundary */
1422         if (!e1000_check_64k_bound(adapter, txdr->desc, txdr->size)) {
1423                 void *olddesc = txdr->desc;
1424                 dma_addr_t olddma = txdr->dma;
1425                 DPRINTK(TX_ERR, ERR, "txdr align check failed: %u bytes "
1426                                      "at %p\n", txdr->size, txdr->desc);
1427                 /* Try again, without freeing the previous */
1428                 txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
1429                 /* Failed allocation, critical failure */
1430                 if (!txdr->desc) {
1431                         pci_free_consistent(pdev, txdr->size, olddesc, olddma);
1432                         goto setup_tx_desc_die;
1433                 }
1434
1435                 if (!e1000_check_64k_bound(adapter, txdr->desc, txdr->size)) {
1436                         /* give up */
1437                         pci_free_consistent(pdev, txdr->size, txdr->desc,
1438                                             txdr->dma);
1439                         pci_free_consistent(pdev, txdr->size, olddesc, olddma);
1440                         DPRINTK(PROBE, ERR,
1441                                 "Unable to allocate aligned memory "
1442                                 "for the transmit descriptor ring\n");
1443                         vfree(txdr->buffer_info);
1444                         return -ENOMEM;
1445                 } else {
1446                         /* Free old allocation, new allocation was successful */
1447                         pci_free_consistent(pdev, txdr->size, olddesc, olddma);
1448                 }
1449         }
1450         memset(txdr->desc, 0, txdr->size);
1451
1452         txdr->next_to_use = 0;
1453         txdr->next_to_clean = 0;
1454         spin_lock_init(&txdr->tx_lock);
1455
1456         return 0;
1457 }
1458
1459 /**
1460  * e1000_setup_all_tx_resources - wrapper to allocate Tx resources
1461  *                                (Descriptors) for all queues
1462  * @adapter: board private structure
1463  *
1464  * Return 0 on success, negative on failure
1465  **/
1466
1467 int
1468 e1000_setup_all_tx_resources(struct e1000_adapter *adapter)
1469 {
1470         int i, err = 0;
1471
1472         for (i = 0; i < adapter->num_tx_queues; i++) {
1473                 err = e1000_setup_tx_resources(adapter, &adapter->tx_ring[i]);
1474                 if (err) {
1475                         DPRINTK(PROBE, ERR,
1476                                 "Allocation for Tx Queue %u failed\n", i);
1477                         for (i-- ; i >= 0; i--)
1478                                 e1000_free_tx_resources(adapter,
1479                                                         &adapter->tx_ring[i]);
1480                         break;
1481                 }
1482         }
1483
1484         return err;
1485 }
1486
1487 /**
1488  * e1000_configure_tx - Configure 8254x Transmit Unit after Reset
1489  * @adapter: board private structure
1490  *
1491  * Configure the Tx unit of the MAC after a reset.
1492  **/
1493
1494 static void
1495 e1000_configure_tx(struct e1000_adapter *adapter)
1496 {
1497         uint64_t tdba;
1498         struct e1000_hw *hw = &adapter->hw;
1499         uint32_t tdlen, tctl, tipg, tarc;
1500         uint32_t ipgr1, ipgr2;
1501
1502         /* Setup the HW Tx Head and Tail descriptor pointers */
1503
1504         switch (adapter->num_tx_queues) {
1505         case 1:
1506         default:
1507                 tdba = adapter->tx_ring[0].dma;
1508                 tdlen = adapter->tx_ring[0].count *
1509                         sizeof(struct e1000_tx_desc);
1510                 E1000_WRITE_REG(hw, TDLEN, tdlen);
1511                 E1000_WRITE_REG(hw, TDBAH, (tdba >> 32));
1512                 E1000_WRITE_REG(hw, TDBAL, (tdba & 0x00000000ffffffffULL));
1513                 E1000_WRITE_REG(hw, TDT, 0);
1514                 E1000_WRITE_REG(hw, TDH, 0);
1515                 adapter->tx_ring[0].tdh = ((hw->mac_type >= e1000_82543) ? E1000_TDH : E1000_82542_TDH);
1516                 adapter->tx_ring[0].tdt = ((hw->mac_type >= e1000_82543) ? E1000_TDT : E1000_82542_TDT);
1517                 break;
1518         }
1519
1520         /* Set the default values for the Tx Inter Packet Gap timer */
1521
1522         if (hw->media_type == e1000_media_type_fiber ||
1523             hw->media_type == e1000_media_type_internal_serdes)
1524                 tipg = DEFAULT_82543_TIPG_IPGT_FIBER;
1525         else
1526                 tipg = DEFAULT_82543_TIPG_IPGT_COPPER;
1527
1528         switch (hw->mac_type) {
1529         case e1000_82542_rev2_0:
1530         case e1000_82542_rev2_1:
1531                 tipg = DEFAULT_82542_TIPG_IPGT;
1532                 ipgr1 = DEFAULT_82542_TIPG_IPGR1;
1533                 ipgr2 = DEFAULT_82542_TIPG_IPGR2;
1534                 break;
1535         case e1000_80003es2lan:
1536                 ipgr1 = DEFAULT_82543_TIPG_IPGR1;
1537                 ipgr2 = DEFAULT_80003ES2LAN_TIPG_IPGR2;
1538                 break;
1539         default:
1540                 ipgr1 = DEFAULT_82543_TIPG_IPGR1;
1541                 ipgr2 = DEFAULT_82543_TIPG_IPGR2;
1542                 break;
1543         }
1544         tipg |= ipgr1 << E1000_TIPG_IPGR1_SHIFT;
1545         tipg |= ipgr2 << E1000_TIPG_IPGR2_SHIFT;
1546         E1000_WRITE_REG(hw, TIPG, tipg);
1547
1548         /* Set the Tx Interrupt Delay register */
1549
1550         E1000_WRITE_REG(hw, TIDV, adapter->tx_int_delay);
1551         if (hw->mac_type >= e1000_82540)
1552                 E1000_WRITE_REG(hw, TADV, adapter->tx_abs_int_delay);
1553
1554         /* Program the Transmit Control Register */
1555
1556         tctl = E1000_READ_REG(hw, TCTL);
1557         tctl &= ~E1000_TCTL_CT;
1558         tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
1559                 (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
1560
1561         if (hw->mac_type == e1000_82571 || hw->mac_type == e1000_82572) {
1562                 tarc = E1000_READ_REG(hw, TARC0);
1563                 /* set the speed mode bit, we'll clear it if we're not at
1564                  * gigabit link later */
1565                 tarc |= (1 << 21);
1566                 E1000_WRITE_REG(hw, TARC0, tarc);
1567         } else if (hw->mac_type == e1000_80003es2lan) {
1568                 tarc = E1000_READ_REG(hw, TARC0);
1569                 tarc |= 1;
1570                 E1000_WRITE_REG(hw, TARC0, tarc);
1571                 tarc = E1000_READ_REG(hw, TARC1);
1572                 tarc |= 1;
1573                 E1000_WRITE_REG(hw, TARC1, tarc);
1574         }
1575
1576         e1000_config_collision_dist(hw);
1577
1578         /* Setup Transmit Descriptor Settings for eop descriptor */
1579         adapter->txd_cmd = E1000_TXD_CMD_IDE | E1000_TXD_CMD_EOP |
1580                 E1000_TXD_CMD_IFCS;
1581
1582         if (hw->mac_type < e1000_82543)
1583                 adapter->txd_cmd |= E1000_TXD_CMD_RPS;
1584         else
1585                 adapter->txd_cmd |= E1000_TXD_CMD_RS;
1586
1587         /* Cache if we're 82544 running in PCI-X because we'll
1588          * need this to apply a workaround later in the send path. */
1589         if (hw->mac_type == e1000_82544 &&
1590             hw->bus_type == e1000_bus_type_pcix)
1591                 adapter->pcix_82544 = 1;
1592
1593         E1000_WRITE_REG(hw, TCTL, tctl);
1594
1595 }
1596
1597 /**
1598  * e1000_setup_rx_resources - allocate Rx resources (Descriptors)
1599  * @adapter: board private structure
1600  * @rxdr:    rx descriptor ring (for a specific queue) to setup
1601  *
1602  * Returns 0 on success, negative on failure
1603  **/
1604
1605 static int
1606 e1000_setup_rx_resources(struct e1000_adapter *adapter,
1607                          struct e1000_rx_ring *rxdr)
1608 {
1609         struct pci_dev *pdev = adapter->pdev;
1610         int size, desc_len;
1611
1612         size = sizeof(struct e1000_buffer) * rxdr->count;
1613         rxdr->buffer_info = vmalloc(size);
1614         if (!rxdr->buffer_info) {
1615                 DPRINTK(PROBE, ERR,
1616                 "Unable to allocate memory for the receive descriptor ring\n");
1617                 return -ENOMEM;
1618         }
1619         memset(rxdr->buffer_info, 0, size);
1620
1621         size = sizeof(struct e1000_ps_page) * rxdr->count;
1622         rxdr->ps_page = kmalloc(size, GFP_KERNEL);
1623         if (!rxdr->ps_page) {
1624                 vfree(rxdr->buffer_info);
1625                 DPRINTK(PROBE, ERR,
1626                 "Unable to allocate memory for the receive descriptor ring\n");
1627                 return -ENOMEM;
1628         }
1629         memset(rxdr->ps_page, 0, size);
1630
1631         size = sizeof(struct e1000_ps_page_dma) * rxdr->count;
1632         rxdr->ps_page_dma = kmalloc(size, GFP_KERNEL);
1633         if (!rxdr->ps_page_dma) {
1634                 vfree(rxdr->buffer_info);
1635                 kfree(rxdr->ps_page);
1636                 DPRINTK(PROBE, ERR,
1637                 "Unable to allocate memory for the receive descriptor ring\n");
1638                 return -ENOMEM;
1639         }
1640         memset(rxdr->ps_page_dma, 0, size);
1641
1642         if (adapter->hw.mac_type <= e1000_82547_rev_2)
1643                 desc_len = sizeof(struct e1000_rx_desc);
1644         else
1645                 desc_len = sizeof(union e1000_rx_desc_packet_split);
1646
1647         /* Round up to nearest 4K */
1648
1649         rxdr->size = rxdr->count * desc_len;
1650         E1000_ROUNDUP(rxdr->size, 4096);
1651
1652         rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma);
1653
1654         if (!rxdr->desc) {
1655                 DPRINTK(PROBE, ERR,
1656                 "Unable to allocate memory for the receive descriptor ring\n");
1657 setup_rx_desc_die:
1658                 vfree(rxdr->buffer_info);
1659                 kfree(rxdr->ps_page);
1660                 kfree(rxdr->ps_page_dma);
1661                 return -ENOMEM;
1662         }
1663
1664         /* Fix for errata 23, can't cross 64kB boundary */
1665         if (!e1000_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
1666                 void *olddesc = rxdr->desc;
1667                 dma_addr_t olddma = rxdr->dma;
1668                 DPRINTK(RX_ERR, ERR, "rxdr align check failed: %u bytes "
1669                                      "at %p\n", rxdr->size, rxdr->desc);
1670                 /* Try again, without freeing the previous */
1671                 rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma);
1672                 /* Failed allocation, critical failure */
1673                 if (!rxdr->desc) {
1674                         pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
1675                         DPRINTK(PROBE, ERR,
1676                                 "Unable to allocate memory "
1677                                 "for the receive descriptor ring\n");
1678                         goto setup_rx_desc_die;
1679                 }
1680
1681                 if (!e1000_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
1682                         /* give up */
1683                         pci_free_consistent(pdev, rxdr->size, rxdr->desc,
1684                                             rxdr->dma);
1685                         pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
1686                         DPRINTK(PROBE, ERR,
1687                                 "Unable to allocate aligned memory "
1688                                 "for the receive descriptor ring\n");
1689                         goto setup_rx_desc_die;
1690                 } else {
1691                         /* Free old allocation, new allocation was successful */
1692                         pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
1693                 }
1694         }
1695         memset(rxdr->desc, 0, rxdr->size);
1696
1697         rxdr->next_to_clean = 0;
1698         rxdr->next_to_use = 0;
1699
1700         return 0;
1701 }
1702
1703 /**
1704  * e1000_setup_all_rx_resources - wrapper to allocate Rx resources
1705  *                                (Descriptors) for all queues
1706  * @adapter: board private structure
1707  *
1708  * Return 0 on success, negative on failure
1709  **/
1710
1711 int
1712 e1000_setup_all_rx_resources(struct e1000_adapter *adapter)
1713 {
1714         int i, err = 0;
1715
1716         for (i = 0; i < adapter->num_rx_queues; i++) {
1717                 err = e1000_setup_rx_resources(adapter, &adapter->rx_ring[i]);
1718                 if (err) {
1719                         DPRINTK(PROBE, ERR,
1720                                 "Allocation for Rx Queue %u failed\n", i);
1721                         for (i-- ; i >= 0; i--)
1722                                 e1000_free_rx_resources(adapter,
1723                                                         &adapter->rx_ring[i]);
1724                         break;
1725                 }
1726         }
1727
1728         return err;
1729 }
1730
1731 /**
1732  * e1000_setup_rctl - configure the receive control registers
1733  * @adapter: Board private structure
1734  **/
1735 #define PAGE_USE_COUNT(S) (((S) >> PAGE_SHIFT) + \
1736                         (((S) & (PAGE_SIZE - 1)) ? 1 : 0))
1737 static void
1738 e1000_setup_rctl(struct e1000_adapter *adapter)
1739 {
1740         uint32_t rctl, rfctl;
1741         uint32_t psrctl = 0;
1742 #ifndef CONFIG_E1000_DISABLE_PACKET_SPLIT
1743         uint32_t pages = 0;
1744 #endif
1745
1746         rctl = E1000_READ_REG(&adapter->hw, RCTL);
1747
1748         rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
1749
1750         rctl |= E1000_RCTL_EN | E1000_RCTL_BAM |
1751                 E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
1752                 (adapter->hw.mc_filter_type << E1000_RCTL_MO_SHIFT);
1753
1754         if (adapter->hw.tbi_compatibility_on == 1)
1755                 rctl |= E1000_RCTL_SBP;
1756         else
1757                 rctl &= ~E1000_RCTL_SBP;
1758
1759         if (adapter->netdev->mtu <= ETH_DATA_LEN)
1760                 rctl &= ~E1000_RCTL_LPE;
1761         else
1762                 rctl |= E1000_RCTL_LPE;
1763
1764         /* Setup buffer sizes */
1765         rctl &= ~E1000_RCTL_SZ_4096;
1766         rctl |= E1000_RCTL_BSEX;
1767         switch (adapter->rx_buffer_len) {
1768                 case E1000_RXBUFFER_256:
1769                         rctl |= E1000_RCTL_SZ_256;
1770                         rctl &= ~E1000_RCTL_BSEX;
1771                         break;
1772                 case E1000_RXBUFFER_512:
1773                         rctl |= E1000_RCTL_SZ_512;
1774                         rctl &= ~E1000_RCTL_BSEX;
1775                         break;
1776                 case E1000_RXBUFFER_1024:
1777                         rctl |= E1000_RCTL_SZ_1024;
1778                         rctl &= ~E1000_RCTL_BSEX;
1779                         break;
1780                 case E1000_RXBUFFER_2048:
1781                 default:
1782                         rctl |= E1000_RCTL_SZ_2048;
1783                         rctl &= ~E1000_RCTL_BSEX;
1784                         break;
1785                 case E1000_RXBUFFER_4096:
1786                         rctl |= E1000_RCTL_SZ_4096;
1787                         break;
1788                 case E1000_RXBUFFER_8192:
1789                         rctl |= E1000_RCTL_SZ_8192;
1790                         break;
1791                 case E1000_RXBUFFER_16384:
1792                         rctl |= E1000_RCTL_SZ_16384;
1793                         break;
1794         }
1795
1796 #ifndef CONFIG_E1000_DISABLE_PACKET_SPLIT
1797         /* 82571 and greater support packet-split where the protocol
1798          * header is placed in skb->data and the packet data is
1799          * placed in pages hanging off of skb_shinfo(skb)->nr_frags.
1800          * In the case of a non-split, skb->data is linearly filled,
1801          * followed by the page buffers.  Therefore, skb->data is
1802          * sized to hold the largest protocol header.
1803          */
1804         /* allocations using alloc_page take too long for regular MTU
1805          * so only enable packet split for jumbo frames */
1806         pages = PAGE_USE_COUNT(adapter->netdev->mtu);
1807         if ((adapter->hw.mac_type >= e1000_82571) && (pages <= 3) &&
1808             PAGE_SIZE <= 16384 && (rctl & E1000_RCTL_LPE))
1809                 adapter->rx_ps_pages = pages;
1810         else
1811                 adapter->rx_ps_pages = 0;
1812 #endif
1813         if (adapter->rx_ps_pages) {
1814                 /* Configure extra packet-split registers */
1815                 rfctl = E1000_READ_REG(&adapter->hw, RFCTL);
1816                 rfctl |= E1000_RFCTL_EXTEN;
1817                 /* disable packet split support for IPv6 extension headers,
1818                  * because some malformed IPv6 headers can hang the RX */
1819                 rfctl |= (E1000_RFCTL_IPV6_EX_DIS |
1820                           E1000_RFCTL_NEW_IPV6_EXT_DIS);
1821
1822                 E1000_WRITE_REG(&adapter->hw, RFCTL, rfctl);
1823
1824                 rctl |= E1000_RCTL_DTYP_PS;
1825
1826                 psrctl |= adapter->rx_ps_bsize0 >>
1827                         E1000_PSRCTL_BSIZE0_SHIFT;
1828
1829                 switch (adapter->rx_ps_pages) {
1830                 case 3:
1831                         psrctl |= PAGE_SIZE <<
1832                                 E1000_PSRCTL_BSIZE3_SHIFT;
1833                 case 2:
1834                         psrctl |= PAGE_SIZE <<
1835                                 E1000_PSRCTL_BSIZE2_SHIFT;
1836                 case 1:
1837                         psrctl |= PAGE_SIZE >>
1838                                 E1000_PSRCTL_BSIZE1_SHIFT;
1839                         break;
1840                 }
1841
1842                 E1000_WRITE_REG(&adapter->hw, PSRCTL, psrctl);
1843         }
1844
1845         E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
1846 }
1847
1848 /**
1849  * e1000_configure_rx - Configure 8254x Receive Unit after Reset
1850  * @adapter: board private structure
1851  *
1852  * Configure the Rx unit of the MAC after a reset.
1853  **/
1854
1855 static void
1856 e1000_configure_rx(struct e1000_adapter *adapter)
1857 {
1858         uint64_t rdba;
1859         struct e1000_hw *hw = &adapter->hw;
1860         uint32_t rdlen, rctl, rxcsum, ctrl_ext;
1861
1862         if (adapter->rx_ps_pages) {
1863                 /* this is a 32 byte descriptor */
1864                 rdlen = adapter->rx_ring[0].count *
1865                         sizeof(union e1000_rx_desc_packet_split);
1866                 adapter->clean_rx = e1000_clean_rx_irq_ps;
1867                 adapter->alloc_rx_buf = e1000_alloc_rx_buffers_ps;
1868         } else {
1869                 rdlen = adapter->rx_ring[0].count *
1870                         sizeof(struct e1000_rx_desc);
1871                 adapter->clean_rx = e1000_clean_rx_irq;
1872                 adapter->alloc_rx_buf = e1000_alloc_rx_buffers;
1873         }
1874
1875         /* disable receives while setting up the descriptors */
1876         rctl = E1000_READ_REG(hw, RCTL);
1877         E1000_WRITE_REG(hw, RCTL, rctl & ~E1000_RCTL_EN);
1878
1879         /* set the Receive Delay Timer Register */
1880         E1000_WRITE_REG(hw, RDTR, adapter->rx_int_delay);
1881
1882         if (hw->mac_type >= e1000_82540) {
1883                 E1000_WRITE_REG(hw, RADV, adapter->rx_abs_int_delay);
1884                 if (adapter->itr > 1)
1885                         E1000_WRITE_REG(hw, ITR,
1886                                 1000000000 / (adapter->itr * 256));
1887         }
1888
1889         if (hw->mac_type >= e1000_82571) {
1890                 ctrl_ext = E1000_READ_REG(hw, CTRL_EXT);
1891                 /* Reset delay timers after every interrupt */
1892                 ctrl_ext |= E1000_CTRL_EXT_INT_TIMER_CLR;
1893 #ifdef CONFIG_E1000_NAPI
1894                 /* Auto-Mask interrupts upon ICR read. */
1895                 ctrl_ext |= E1000_CTRL_EXT_IAME;
1896 #endif
1897                 E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
1898                 E1000_WRITE_REG(hw, IAM, ~0);
1899                 E1000_WRITE_FLUSH(hw);
1900         }
1901
1902         /* Setup the HW Rx Head and Tail Descriptor Pointers and
1903          * the Base and Length of the Rx Descriptor Ring */
1904         switch (adapter->num_rx_queues) {
1905         case 1:
1906         default:
1907                 rdba = adapter->rx_ring[0].dma;
1908                 E1000_WRITE_REG(hw, RDLEN, rdlen);
1909                 E1000_WRITE_REG(hw, RDBAH, (rdba >> 32));
1910                 E1000_WRITE_REG(hw, RDBAL, (rdba & 0x00000000ffffffffULL));
1911                 E1000_WRITE_REG(hw, RDT, 0);
1912                 E1000_WRITE_REG(hw, RDH, 0);
1913                 adapter->rx_ring[0].rdh = ((hw->mac_type >= e1000_82543) ? E1000_RDH : E1000_82542_RDH);
1914                 adapter->rx_ring[0].rdt = ((hw->mac_type >= e1000_82543) ? E1000_RDT : E1000_82542_RDT);
1915                 break;
1916         }
1917
1918         /* Enable 82543 Receive Checksum Offload for TCP and UDP */
1919         if (hw->mac_type >= e1000_82543) {
1920                 rxcsum = E1000_READ_REG(hw, RXCSUM);
1921                 if (adapter->rx_csum == TRUE) {
1922                         rxcsum |= E1000_RXCSUM_TUOFL;
1923
1924                         /* Enable 82571 IPv4 payload checksum for UDP fragments
1925                          * Must be used in conjunction with packet-split. */
1926                         if ((hw->mac_type >= e1000_82571) &&
1927                             (adapter->rx_ps_pages)) {
1928                                 rxcsum |= E1000_RXCSUM_IPPCSE;
1929                         }
1930                 } else {
1931                         rxcsum &= ~E1000_RXCSUM_TUOFL;
1932                         /* don't need to clear IPPCSE as it defaults to 0 */
1933                 }
1934                 E1000_WRITE_REG(hw, RXCSUM, rxcsum);
1935         }
1936
1937         /* enable early receives on 82573, only takes effect if using > 2048
1938          * byte total frame size.  for example only for jumbo frames */
1939 #define E1000_ERT_2048 0x100
1940         if (hw->mac_type == e1000_82573)
1941                 E1000_WRITE_REG(hw, ERT, E1000_ERT_2048);
1942
1943         /* Enable Receives */
1944         E1000_WRITE_REG(hw, RCTL, rctl);
1945 }
1946
1947 /**
1948  * e1000_free_tx_resources - Free Tx Resources per Queue
1949  * @adapter: board private structure
1950  * @tx_ring: Tx descriptor ring for a specific queue
1951  *
1952  * Free all transmit software resources
1953  **/
1954
1955 static void
1956 e1000_free_tx_resources(struct e1000_adapter *adapter,
1957                         struct e1000_tx_ring *tx_ring)
1958 {
1959         struct pci_dev *pdev = adapter->pdev;
1960
1961         e1000_clean_tx_ring(adapter, tx_ring);
1962
1963         vfree(tx_ring->buffer_info);
1964         tx_ring->buffer_info = NULL;
1965
1966         pci_free_consistent(pdev, tx_ring->size, tx_ring->desc, tx_ring->dma);
1967
1968         tx_ring->desc = NULL;
1969 }
1970
1971 /**
1972  * e1000_free_all_tx_resources - Free Tx Resources for All Queues
1973  * @adapter: board private structure
1974  *
1975  * Free all transmit software resources
1976  **/
1977
1978 void
1979 e1000_free_all_tx_resources(struct e1000_adapter *adapter)
1980 {
1981         int i;
1982
1983         for (i = 0; i < adapter->num_tx_queues; i++)
1984                 e1000_free_tx_resources(adapter, &adapter->tx_ring[i]);
1985 }
1986
1987 static void
1988 e1000_unmap_and_free_tx_resource(struct e1000_adapter *adapter,
1989                         struct e1000_buffer *buffer_info)
1990 {
1991         if (buffer_info->dma) {
1992                 pci_unmap_page(adapter->pdev,
1993                                 buffer_info->dma,
1994                                 buffer_info->length,
1995                                 PCI_DMA_TODEVICE);
1996         }
1997         if (buffer_info->skb)
1998                 dev_kfree_skb_any(buffer_info->skb);
1999         memset(buffer_info, 0, sizeof(struct e1000_buffer));
2000 }
2001
2002 /**
2003  * e1000_clean_tx_ring - Free Tx Buffers
2004  * @adapter: board private structure
2005  * @tx_ring: ring to be cleaned
2006  **/
2007
2008 static void
2009 e1000_clean_tx_ring(struct e1000_adapter *adapter,
2010                     struct e1000_tx_ring *tx_ring)
2011 {
2012         struct e1000_buffer *buffer_info;
2013         unsigned long size;
2014         unsigned int i;
2015
2016         /* Free all the Tx ring sk_buffs */
2017
2018         for (i = 0; i < tx_ring->count; i++) {
2019                 buffer_info = &tx_ring->buffer_info[i];
2020                 e1000_unmap_and_free_tx_resource(adapter, buffer_info);
2021         }
2022
2023         size = sizeof(struct e1000_buffer) * tx_ring->count;
2024         memset(tx_ring->buffer_info, 0, size);
2025
2026         /* Zero out the descriptor ring */
2027
2028         memset(tx_ring->desc, 0, tx_ring->size);
2029
2030         tx_ring->next_to_use = 0;
2031         tx_ring->next_to_clean = 0;
2032         tx_ring->last_tx_tso = 0;
2033
2034         writel(0, adapter->hw.hw_addr + tx_ring->tdh);
2035         writel(0, adapter->hw.hw_addr + tx_ring->tdt);
2036 }
2037
2038 /**
2039  * e1000_clean_all_tx_rings - Free Tx Buffers for all queues
2040  * @adapter: board private structure
2041  **/
2042
2043 static void
2044 e1000_clean_all_tx_rings(struct e1000_adapter *adapter)
2045 {
2046         int i;
2047
2048         for (i = 0; i < adapter->num_tx_queues; i++)
2049                 e1000_clean_tx_ring(adapter, &adapter->tx_ring[i]);
2050 }
2051
2052 /**
2053  * e1000_free_rx_resources - Free Rx Resources
2054  * @adapter: board private structure
2055  * @rx_ring: ring to clean the resources from
2056  *
2057  * Free all receive software resources
2058  **/
2059
2060 static void
2061 e1000_free_rx_resources(struct e1000_adapter *adapter,
2062                         struct e1000_rx_ring *rx_ring)
2063 {
2064         struct pci_dev *pdev = adapter->pdev;
2065
2066         e1000_clean_rx_ring(adapter, rx_ring);
2067
2068         vfree(rx_ring->buffer_info);
2069         rx_ring->buffer_info = NULL;
2070         kfree(rx_ring->ps_page);
2071         rx_ring->ps_page = NULL;
2072         kfree(rx_ring->ps_page_dma);
2073         rx_ring->ps_page_dma = NULL;
2074
2075         pci_free_consistent(pdev, rx_ring->size, rx_ring->desc, rx_ring->dma);
2076
2077         rx_ring->desc = NULL;
2078 }
2079
2080 /**
2081  * e1000_free_all_rx_resources - Free Rx Resources for All Queues
2082  * @adapter: board private structure
2083  *
2084  * Free all receive software resources
2085  **/
2086
2087 void
2088 e1000_free_all_rx_resources(struct e1000_adapter *adapter)
2089 {
2090         int i;
2091
2092         for (i = 0; i < adapter->num_rx_queues; i++)
2093                 e1000_free_rx_resources(adapter, &adapter->rx_ring[i]);
2094 }
2095
2096 /**
2097  * e1000_clean_rx_ring - Free Rx Buffers per Queue
2098  * @adapter: board private structure
2099  * @rx_ring: ring to free buffers from
2100  **/
2101
2102 static void
2103 e1000_clean_rx_ring(struct e1000_adapter *adapter,
2104                     struct e1000_rx_ring *rx_ring)
2105 {
2106         struct e1000_buffer *buffer_info;
2107         struct e1000_ps_page *ps_page;
2108         struct e1000_ps_page_dma *ps_page_dma;
2109         struct pci_dev *pdev = adapter->pdev;
2110         unsigned long size;
2111         unsigned int i, j;
2112
2113         /* Free all the Rx ring sk_buffs */
2114         for (i = 0; i < rx_ring->count; i++) {
2115                 buffer_info = &rx_ring->buffer_info[i];
2116                 if (buffer_info->skb) {
2117                         pci_unmap_single(pdev,
2118                                          buffer_info->dma,
2119                                          buffer_info->length,
2120                                          PCI_DMA_FROMDEVICE);
2121
2122                         dev_kfree_skb(buffer_info->skb);
2123                         buffer_info->skb = NULL;
2124                 }
2125                 ps_page = &rx_ring->ps_page[i];
2126                 ps_page_dma = &rx_ring->ps_page_dma[i];
2127                 for (j = 0; j < adapter->rx_ps_pages; j++) {
2128                         if (!ps_page->ps_page[j]) break;
2129                         pci_unmap_page(pdev,
2130                                        ps_page_dma->ps_page_dma[j],
2131                                        PAGE_SIZE, PCI_DMA_FROMDEVICE);
2132                         ps_page_dma->ps_page_dma[j] = 0;
2133                         put_page(ps_page->ps_page[j]);
2134                         ps_page->ps_page[j] = NULL;
2135                 }
2136         }
2137
2138         size = sizeof(struct e1000_buffer) * rx_ring->count;
2139         memset(rx_ring->buffer_info, 0, size);
2140         size = sizeof(struct e1000_ps_page) * rx_ring->count;
2141         memset(rx_ring->ps_page, 0, size);
2142         size = sizeof(struct e1000_ps_page_dma) * rx_ring->count;
2143         memset(rx_ring->ps_page_dma, 0, size);
2144
2145         /* Zero out the descriptor ring */
2146
2147         memset(rx_ring->desc, 0, rx_ring->size);
2148
2149         rx_ring->next_to_clean = 0;
2150         rx_ring->next_to_use = 0;
2151
2152         writel(0, adapter->hw.hw_addr + rx_ring->rdh);
2153         writel(0, adapter->hw.hw_addr + rx_ring->rdt);
2154 }
2155
2156 /**
2157  * e1000_clean_all_rx_rings - Free Rx Buffers for all queues
2158  * @adapter: board private structure
2159  **/
2160
2161 static void
2162 e1000_clean_all_rx_rings(struct e1000_adapter *adapter)
2163 {
2164         int i;
2165
2166         for (i = 0; i < adapter->num_rx_queues; i++)
2167                 e1000_clean_rx_ring(adapter, &adapter->rx_ring[i]);
2168 }
2169
2170 /* The 82542 2.0 (revision 2) needs to have the receive unit in reset
2171  * and memory write and invalidate disabled for certain operations
2172  */
2173 static void
2174 e1000_enter_82542_rst(struct e1000_adapter *adapter)
2175 {
2176         struct net_device *netdev = adapter->netdev;
2177         uint32_t rctl;
2178
2179         e1000_pci_clear_mwi(&adapter->hw);
2180
2181         rctl = E1000_READ_REG(&adapter->hw, RCTL);
2182         rctl |= E1000_RCTL_RST;
2183         E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
2184         E1000_WRITE_FLUSH(&adapter->hw);
2185         mdelay(5);
2186
2187         if (netif_running(netdev))
2188                 e1000_clean_all_rx_rings(adapter);
2189 }
2190
2191 static void
2192 e1000_leave_82542_rst(struct e1000_adapter *adapter)
2193 {
2194         struct net_device *netdev = adapter->netdev;
2195         uint32_t rctl;
2196
2197         rctl = E1000_READ_REG(&adapter->hw, RCTL);
2198         rctl &= ~E1000_RCTL_RST;
2199         E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
2200         E1000_WRITE_FLUSH(&adapter->hw);
2201         mdelay(5);
2202
2203         if (adapter->hw.pci_cmd_word & PCI_COMMAND_INVALIDATE)
2204                 e1000_pci_set_mwi(&adapter->hw);
2205
2206         if (netif_running(netdev)) {
2207                 /* No need to loop, because 82542 supports only 1 queue */
2208                 struct e1000_rx_ring *ring = &adapter->rx_ring[0];
2209                 e1000_configure_rx(adapter);
2210                 adapter->alloc_rx_buf(adapter, ring, E1000_DESC_UNUSED(ring));
2211         }
2212 }
2213
2214 /**
2215  * e1000_set_mac - Change the Ethernet Address of the NIC
2216  * @netdev: network interface device structure
2217  * @p: pointer to an address structure
2218  *
2219  * Returns 0 on success, negative on failure
2220  **/
2221
2222 static int
2223 e1000_set_mac(struct net_device *netdev, void *p)
2224 {
2225         struct e1000_adapter *adapter = netdev_priv(netdev);
2226         struct sockaddr *addr = p;
2227
2228         if (!is_valid_ether_addr(addr->sa_data))
2229                 return -EADDRNOTAVAIL;
2230
2231         /* 82542 2.0 needs to be in reset to write receive address registers */
2232
2233         if (adapter->hw.mac_type == e1000_82542_rev2_0)
2234                 e1000_enter_82542_rst(adapter);
2235
2236         memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
2237         memcpy(adapter->hw.mac_addr, addr->sa_data, netdev->addr_len);
2238
2239         e1000_rar_set(&adapter->hw, adapter->hw.mac_addr, 0);
2240
2241         /* With 82571 controllers, LAA may be overwritten (with the default)
2242          * due to controller reset from the other port. */
2243         if (adapter->hw.mac_type == e1000_82571) {
2244                 /* activate the work around */
2245                 adapter->hw.laa_is_present = 1;
2246
2247                 /* Hold a copy of the LAA in RAR[14] This is done so that
2248                  * between the time RAR[0] gets clobbered  and the time it
2249                  * gets fixed (in e1000_watchdog), the actual LAA is in one
2250                  * of the RARs and no incoming packets directed to this port
2251                  * are dropped. Eventaully the LAA will be in RAR[0] and
2252                  * RAR[14] */
2253                 e1000_rar_set(&adapter->hw, adapter->hw.mac_addr,
2254                                         E1000_RAR_ENTRIES - 1);
2255         }
2256
2257         if (adapter->hw.mac_type == e1000_82542_rev2_0)
2258                 e1000_leave_82542_rst(adapter);
2259
2260         return 0;
2261 }
2262
2263 /**
2264  * e1000_set_multi - Multicast and Promiscuous mode set
2265  * @netdev: network interface device structure
2266  *
2267  * The set_multi entry point is called whenever the multicast address
2268  * list or the network interface flags are updated.  This routine is
2269  * responsible for configuring the hardware for proper multicast,
2270  * promiscuous mode, and all-multi behavior.
2271  **/
2272
2273 static void
2274 e1000_set_multi(struct net_device *netdev)
2275 {
2276         struct e1000_adapter *adapter = netdev_priv(netdev);
2277         struct e1000_hw *hw = &adapter->hw;
2278         struct dev_mc_list *mc_ptr;
2279         uint32_t rctl;
2280         uint32_t hash_value;
2281         int i, rar_entries = E1000_RAR_ENTRIES;
2282         int mta_reg_count = (hw->mac_type == e1000_ich8lan) ?
2283                                 E1000_NUM_MTA_REGISTERS_ICH8LAN :
2284                                 E1000_NUM_MTA_REGISTERS;
2285
2286         if (adapter->hw.mac_type == e1000_ich8lan)
2287                 rar_entries = E1000_RAR_ENTRIES_ICH8LAN;
2288
2289         /* reserve RAR[14] for LAA over-write work-around */
2290         if (adapter->hw.mac_type == e1000_82571)
2291                 rar_entries--;
2292
2293         /* Check for Promiscuous and All Multicast modes */
2294
2295         rctl = E1000_READ_REG(hw, RCTL);
2296
2297         if (netdev->flags & IFF_PROMISC) {
2298                 rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
2299         } else if (netdev->flags & IFF_ALLMULTI) {
2300                 rctl |= E1000_RCTL_MPE;
2301                 rctl &= ~E1000_RCTL_UPE;
2302         } else {
2303                 rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE);
2304         }
2305
2306         E1000_WRITE_REG(hw, RCTL, rctl);
2307
2308         /* 82542 2.0 needs to be in reset to write receive address registers */
2309
2310         if (hw->mac_type == e1000_82542_rev2_0)
2311                 e1000_enter_82542_rst(adapter);
2312
2313         /* load the first 14 multicast address into the exact filters 1-14
2314          * RAR 0 is used for the station MAC adddress
2315          * if there are not 14 addresses, go ahead and clear the filters
2316          * -- with 82571 controllers only 0-13 entries are filled here
2317          */
2318         mc_ptr = netdev->mc_list;
2319
2320         for (i = 1; i < rar_entries; i++) {
2321                 if (mc_ptr) {
2322                         e1000_rar_set(hw, mc_ptr->dmi_addr, i);
2323                         mc_ptr = mc_ptr->next;
2324                 } else {
2325                         E1000_WRITE_REG_ARRAY(hw, RA, i << 1, 0);
2326                         E1000_WRITE_FLUSH(hw);
2327                         E1000_WRITE_REG_ARRAY(hw, RA, (i << 1) + 1, 0);
2328                         E1000_WRITE_FLUSH(hw);
2329                 }
2330         }
2331
2332         /* clear the old settings from the multicast hash table */
2333
2334         for (i = 0; i < mta_reg_count; i++) {
2335                 E1000_WRITE_REG_ARRAY(hw, MTA, i, 0);
2336                 E1000_WRITE_FLUSH(hw);
2337         }
2338
2339         /* load any remaining addresses into the hash table */
2340
2341         for (; mc_ptr; mc_ptr = mc_ptr->next) {
2342                 hash_value = e1000_hash_mc_addr(hw, mc_ptr->dmi_addr);
2343                 e1000_mta_set(hw, hash_value);
2344         }
2345
2346         if (hw->mac_type == e1000_82542_rev2_0)
2347                 e1000_leave_82542_rst(adapter);
2348 }
2349
2350 /* Need to wait a few seconds after link up to get diagnostic information from
2351  * the phy */
2352
2353 static void
2354 e1000_update_phy_info(unsigned long data)
2355 {
2356         struct e1000_adapter *adapter = (struct e1000_adapter *) data;
2357         e1000_phy_get_info(&adapter->hw, &adapter->phy_info);
2358 }
2359
2360 /**
2361  * e1000_82547_tx_fifo_stall - Timer Call-back
2362  * @data: pointer to adapter cast into an unsigned long
2363  **/
2364
2365 static void
2366 e1000_82547_tx_fifo_stall(unsigned long data)
2367 {
2368         struct e1000_adapter *adapter = (struct e1000_adapter *) data;
2369         struct net_device *netdev = adapter->netdev;
2370         uint32_t tctl;
2371
2372         if (atomic_read(&adapter->tx_fifo_stall)) {
2373                 if ((E1000_READ_REG(&adapter->hw, TDT) ==
2374                     E1000_READ_REG(&adapter->hw, TDH)) &&
2375                    (E1000_READ_REG(&adapter->hw, TDFT) ==
2376                     E1000_READ_REG(&adapter->hw, TDFH)) &&
2377                    (E1000_READ_REG(&adapter->hw, TDFTS) ==
2378                     E1000_READ_REG(&adapter->hw, TDFHS))) {
2379                         tctl = E1000_READ_REG(&adapter->hw, TCTL);
2380                         E1000_WRITE_REG(&adapter->hw, TCTL,
2381                                         tctl & ~E1000_TCTL_EN);
2382                         E1000_WRITE_REG(&adapter->hw, TDFT,
2383                                         adapter->tx_head_addr);
2384                         E1000_WRITE_REG(&adapter->hw, TDFH,
2385                                         adapter->tx_head_addr);
2386                         E1000_WRITE_REG(&adapter->hw, TDFTS,
2387                                         adapter->tx_head_addr);
2388                         E1000_WRITE_REG(&adapter->hw, TDFHS,
2389                                         adapter->tx_head_addr);
2390                         E1000_WRITE_REG(&adapter->hw, TCTL, tctl);
2391                         E1000_WRITE_FLUSH(&adapter->hw);
2392
2393                         adapter->tx_fifo_head = 0;
2394                         atomic_set(&adapter->tx_fifo_stall, 0);
2395                         netif_wake_queue(netdev);
2396                 } else {
2397                         mod_timer(&adapter->tx_fifo_stall_timer, jiffies + 1);
2398                 }
2399         }
2400 }
2401
2402 /**
2403  * e1000_watchdog - Timer Call-back
2404  * @data: pointer to adapter cast into an unsigned long
2405  **/
2406 static void
2407 e1000_watchdog(unsigned long data)
2408 {
2409         struct e1000_adapter *adapter = (struct e1000_adapter *) data;
2410         struct net_device *netdev = adapter->netdev;
2411         struct e1000_tx_ring *txdr = adapter->tx_ring;
2412         uint32_t link, tctl;
2413         int32_t ret_val;
2414
2415         ret_val = e1000_check_for_link(&adapter->hw);
2416         if ((ret_val == E1000_ERR_PHY) &&
2417             (adapter->hw.phy_type == e1000_phy_igp_3) &&
2418             (E1000_READ_REG(&adapter->hw, CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) {
2419                 /* See e1000_kumeran_lock_loss_workaround() */
2420                 DPRINTK(LINK, INFO,
2421                         "Gigabit has been disabled, downgrading speed\n");
2422         }
2423
2424         if (adapter->hw.mac_type == e1000_82573) {
2425                 e1000_enable_tx_pkt_filtering(&adapter->hw);
2426                 if (adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id)
2427                         e1000_update_mng_vlan(adapter);
2428         }
2429
2430         if ((adapter->hw.media_type == e1000_media_type_internal_serdes) &&
2431            !(E1000_READ_REG(&adapter->hw, TXCW) & E1000_TXCW_ANE))
2432                 link = !adapter->hw.serdes_link_down;
2433         else
2434                 link = E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_LU;
2435
2436         if (link) {
2437                 if (!netif_carrier_ok(netdev)) {
2438                         boolean_t txb2b = 1;
2439                         e1000_get_speed_and_duplex(&adapter->hw,
2440                                                    &adapter->link_speed,
2441                                                    &adapter->link_duplex);
2442
2443                         DPRINTK(LINK, INFO, "NIC Link is Up %d Mbps %s\n",
2444                                adapter->link_speed,
2445                                adapter->link_duplex == FULL_DUPLEX ?
2446                                "Full Duplex" : "Half Duplex");
2447
2448                         /* tweak tx_queue_len according to speed/duplex
2449                          * and adjust the timeout factor */
2450                         netdev->tx_queue_len = adapter->tx_queue_len;
2451                         adapter->tx_timeout_factor = 1;
2452                         switch (adapter->link_speed) {
2453                         case SPEED_10:
2454                                 txb2b = 0;
2455                                 netdev->tx_queue_len = 10;
2456                                 adapter->tx_timeout_factor = 8;
2457                                 break;
2458                         case SPEED_100:
2459                                 txb2b = 0;
2460                                 netdev->tx_queue_len = 100;
2461                                 /* maybe add some timeout factor ? */
2462                                 break;
2463                         }
2464
2465                         if ((adapter->hw.mac_type == e1000_82571 ||
2466                              adapter->hw.mac_type == e1000_82572) &&
2467                             txb2b == 0) {
2468                                 uint32_t tarc0;
2469                                 tarc0 = E1000_READ_REG(&adapter->hw, TARC0);
2470                                 tarc0 &= ~(1 << 21);
2471                                 E1000_WRITE_REG(&adapter->hw, TARC0, tarc0);
2472                         }
2473
2474 #ifdef NETIF_F_TSO
2475                         /* disable TSO for pcie and 10/100 speeds, to avoid
2476                          * some hardware issues */
2477                         if (!adapter->tso_force &&
2478                             adapter->hw.bus_type == e1000_bus_type_pci_express){
2479                                 switch (adapter->link_speed) {
2480                                 case SPEED_10:
2481                                 case SPEED_100:
2482                                         DPRINTK(PROBE,INFO,
2483                                         "10/100 speed: disabling TSO\n");
2484                                         netdev->features &= ~NETIF_F_TSO;
2485 #ifdef NETIF_F_TSO6
2486                                         netdev->features &= ~NETIF_F_TSO6;
2487 #endif
2488                                         break;
2489                                 case SPEED_1000:
2490                                         netdev->features |= NETIF_F_TSO;
2491 #ifdef NETIF_F_TSO6
2492                                         netdev->features |= NETIF_F_TSO6;
2493 #endif
2494                                         break;
2495                                 default:
2496                                         /* oops */
2497                                         break;
2498                                 }
2499                         }
2500 #endif
2501
2502                         /* enable transmits in the hardware, need to do this
2503                          * after setting TARC0 */
2504                         tctl = E1000_READ_REG(&adapter->hw, TCTL);
2505                         tctl |= E1000_TCTL_EN;
2506                         E1000_WRITE_REG(&adapter->hw, TCTL, tctl);
2507
2508                         netif_carrier_on(netdev);
2509                         netif_wake_queue(netdev);
2510                         mod_timer(&adapter->phy_info_timer, jiffies + 2 * HZ);
2511                         adapter->smartspeed = 0;
2512                 }
2513         } else {
2514                 if (netif_carrier_ok(netdev)) {
2515                         adapter->link_speed = 0;
2516                         adapter->link_duplex = 0;
2517                         DPRINTK(LINK, INFO, "NIC Link is Down\n");
2518                         netif_carrier_off(netdev);
2519                         netif_stop_queue(netdev);
2520                         mod_timer(&adapter->phy_info_timer, jiffies + 2 * HZ);
2521
2522                         /* 80003ES2LAN workaround--
2523                          * For packet buffer work-around on link down event;
2524                          * disable receives in the ISR and
2525                          * reset device here in the watchdog
2526                          */
2527                         if (adapter->hw.mac_type == e1000_80003es2lan)
2528                                 /* reset device */
2529                                 schedule_work(&adapter->reset_task);
2530                 }
2531
2532                 e1000_smartspeed(adapter);
2533         }
2534
2535         e1000_update_stats(adapter);
2536
2537         adapter->hw.tx_packet_delta = adapter->stats.tpt - adapter->tpt_old;
2538         adapter->tpt_old = adapter->stats.tpt;
2539         adapter->hw.collision_delta = adapter->stats.colc - adapter->colc_old;
2540         adapter->colc_old = adapter->stats.colc;
2541
2542         adapter->gorcl = adapter->stats.gorcl - adapter->gorcl_old;
2543         adapter->gorcl_old = adapter->stats.gorcl;
2544         adapter->gotcl = adapter->stats.gotcl - adapter->gotcl_old;
2545         adapter->gotcl_old = adapter->stats.gotcl;
2546
2547         e1000_update_adaptive(&adapter->hw);
2548
2549         if (!netif_carrier_ok(netdev)) {
2550                 if (E1000_DESC_UNUSED(txdr) + 1 < txdr->count) {
2551                         /* We've lost link, so the controller stops DMA,
2552                          * but we've got queued Tx work that's never going
2553                          * to get done, so reset controller to flush Tx.
2554                          * (Do the reset outside of interrupt context). */
2555                         adapter->tx_timeout_count++;
2556                         schedule_work(&adapter->reset_task);
2557                 }
2558         }
2559
2560         /* Dynamic mode for Interrupt Throttle Rate (ITR) */
2561         if (adapter->hw.mac_type >= e1000_82540 && adapter->itr == 1) {
2562                 /* Symmetric Tx/Rx gets a reduced ITR=2000; Total
2563                  * asymmetrical Tx or Rx gets ITR=8000; everyone
2564                  * else is between 2000-8000. */
2565                 uint32_t goc = (adapter->gotcl + adapter->gorcl) / 10000;
2566                 uint32_t dif = (adapter->gotcl > adapter->gorcl ?
2567                         adapter->gotcl - adapter->gorcl :
2568                         adapter->gorcl - adapter->gotcl) / 10000;
2569                 uint32_t itr = goc > 0 ? (dif * 6000 / goc + 2000) : 8000;
2570                 E1000_WRITE_REG(&adapter->hw, ITR, 1000000000 / (itr * 256));
2571         }
2572
2573         /* Cause software interrupt to ensure rx ring is cleaned */
2574         E1000_WRITE_REG(&adapter->hw, ICS, E1000_ICS_RXDMT0);
2575
2576         /* Force detection of hung controller every watchdog period */
2577         adapter->detect_tx_hung = TRUE;
2578
2579         /* With 82571 controllers, LAA may be overwritten due to controller
2580          * reset from the other port. Set the appropriate LAA in RAR[0] */
2581         if (adapter->hw.mac_type == e1000_82571 && adapter->hw.laa_is_present)
2582                 e1000_rar_set(&adapter->hw, adapter->hw.mac_addr, 0);
2583
2584         /* Reset the timer */
2585         mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ);
2586 }
2587
2588 #define E1000_TX_FLAGS_CSUM             0x00000001
2589 #define E1000_TX_FLAGS_VLAN             0x00000002
2590 #define E1000_TX_FLAGS_TSO              0x00000004
2591 #define E1000_TX_FLAGS_IPV4             0x00000008
2592 #define E1000_TX_FLAGS_VLAN_MASK        0xffff0000
2593 #define E1000_TX_FLAGS_VLAN_SHIFT       16
2594
2595 static int
2596 e1000_tso(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
2597           struct sk_buff *skb)
2598 {
2599 #ifdef NETIF_F_TSO
2600         struct e1000_context_desc *context_desc;
2601         struct e1000_buffer *buffer_info;
2602         unsigned int i;
2603         uint32_t cmd_length = 0;
2604         uint16_t ipcse = 0, tucse, mss;
2605         uint8_t ipcss, ipcso, tucss, tucso, hdr_len;
2606         int err;
2607
2608         if (skb_is_gso(skb)) {
2609                 if (skb_header_cloned(skb)) {
2610                         err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
2611                         if (err)
2612                                 return err;
2613                 }
2614
2615                 hdr_len = ((skb->h.raw - skb->data) + (skb->h.th->doff << 2));
2616                 mss = skb_shinfo(skb)->gso_size;
2617                 if (skb->protocol == htons(ETH_P_IP)) {
2618                         skb->nh.iph->tot_len = 0;
2619                         skb->nh.iph->check = 0;
2620                         skb->h.th->check =
2621                                 ~csum_tcpudp_magic(skb->nh.iph->saddr,
2622                                                    skb->nh.iph->daddr,
2623                                                    0,
2624                                                    IPPROTO_TCP,
2625                                                    0);
2626                         cmd_length = E1000_TXD_CMD_IP;
2627                         ipcse = skb->h.raw - skb->data - 1;
2628 #ifdef NETIF_F_TSO6
2629                 } else if (skb->protocol == htons(ETH_P_IPV6)) {
2630                         skb->nh.ipv6h->payload_len = 0;
2631                         skb->h.th->check =
2632                                 ~csum_ipv6_magic(&skb->nh.ipv6h->saddr,
2633                                                  &skb->nh.ipv6h->daddr,
2634                                                  0,
2635                                                  IPPROTO_TCP,
2636                                                  0);
2637                         ipcse = 0;
2638 #endif
2639                 }
2640                 ipcss = skb->nh.raw - skb->data;
2641                 ipcso = (void *)&(skb->nh.iph->check) - (void *)skb->data;
2642                 tucss = skb->h.raw - skb->data;
2643                 tucso = (void *)&(skb->h.th->check) - (void *)skb->data;
2644                 tucse = 0;
2645
2646                 cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE |
2647                                E1000_TXD_CMD_TCP | (skb->len - (hdr_len)));
2648
2649                 i = tx_ring->next_to_use;
2650                 context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
2651                 buffer_info = &tx_ring->buffer_info[i];
2652
2653                 context_desc->lower_setup.ip_fields.ipcss  = ipcss;
2654                 context_desc->lower_setup.ip_fields.ipcso  = ipcso;
2655                 context_desc->lower_setup.ip_fields.ipcse  = cpu_to_le16(ipcse);
2656                 context_desc->upper_setup.tcp_fields.tucss = tucss;
2657                 context_desc->upper_setup.tcp_fields.tucso = tucso;
2658                 context_desc->upper_setup.tcp_fields.tucse = cpu_to_le16(tucse);
2659                 context_desc->tcp_seg_setup.fields.mss     = cpu_to_le16(mss);
2660                 context_desc->tcp_seg_setup.fields.hdr_len = hdr_len;
2661                 context_desc->cmd_and_length = cpu_to_le32(cmd_length);
2662
2663                 buffer_info->time_stamp = jiffies;
2664
2665                 if (++i == tx_ring->count) i = 0;
2666                 tx_ring->next_to_use = i;
2667
2668                 return TRUE;
2669         }
2670 #endif
2671
2672         return FALSE;
2673 }
2674
2675 static boolean_t
2676 e1000_tx_csum(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
2677               struct sk_buff *skb)
2678 {
2679         struct e1000_context_desc *context_desc;
2680         struct e1000_buffer *buffer_info;
2681         unsigned int i;
2682         uint8_t css;
2683
2684         if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) {
2685                 css = skb->h.raw - skb->data;
2686
2687                 i = tx_ring->next_to_use;
2688                 buffer_info = &tx_ring->buffer_info[i];
2689                 context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
2690
2691                 context_desc->upper_setup.tcp_fields.tucss = css;
2692                 context_desc->upper_setup.tcp_fields.tucso = css + skb->csum;
2693                 context_desc->upper_setup.tcp_fields.tucse = 0;
2694                 context_desc->tcp_seg_setup.data = 0;
2695                 context_desc->cmd_and_length = cpu_to_le32(E1000_TXD_CMD_DEXT);
2696
2697                 buffer_info->time_stamp = jiffies;
2698
2699                 if (unlikely(++i == tx_ring->count)) i = 0;
2700                 tx_ring->next_to_use = i;
2701
2702                 return TRUE;
2703         }
2704
2705         return FALSE;
2706 }
2707
2708 #define E1000_MAX_TXD_PWR       12
2709 #define E1000_MAX_DATA_PER_TXD  (1<<E1000_MAX_TXD_PWR)
2710
2711 static int
2712 e1000_tx_map(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
2713              struct sk_buff *skb, unsigned int first, unsigned int max_per_txd,
2714              unsigned int nr_frags, unsigned int mss)
2715 {
2716         struct e1000_buffer *buffer_info;
2717         unsigned int len = skb->len;
2718         unsigned int offset = 0, size, count = 0, i;
2719         unsigned int f;
2720         len -= skb->data_len;
2721
2722         i = tx_ring->next_to_use;
2723
2724         while (len) {
2725                 buffer_info = &tx_ring->buffer_info[i];
2726                 size = min(len, max_per_txd);
2727 #ifdef NETIF_F_TSO
2728                 /* Workaround for Controller erratum --
2729                  * descriptor for non-tso packet in a linear SKB that follows a
2730                  * tso gets written back prematurely before the data is fully
2731                  * DMA'd to the controller */
2732                 if (!skb->data_len && tx_ring->last_tx_tso &&
2733                     !skb_is_gso(skb)) {
2734                         tx_ring->last_tx_tso = 0;
2735                         size -= 4;
2736                 }
2737
2738                 /* Workaround for premature desc write-backs
2739                  * in TSO mode.  Append 4-byte sentinel desc */
2740                 if (unlikely(mss && !nr_frags && size == len && size > 8))
2741                         size -= 4;
2742 #endif
2743                 /* work-around for errata 10 and it applies
2744                  * to all controllers in PCI-X mode
2745                  * The fix is to make sure that the first descriptor of a
2746                  * packet is smaller than 2048 - 16 - 16 (or 2016) bytes
2747                  */
2748                 if (unlikely((adapter->hw.bus_type == e1000_bus_type_pcix) &&
2749                                 (size > 2015) && count == 0))
2750                         size = 2015;
2751
2752                 /* Workaround for potential 82544 hang in PCI-X.  Avoid
2753                  * terminating buffers within evenly-aligned dwords. */
2754                 if (unlikely(adapter->pcix_82544 &&
2755                    !((unsigned long)(skb->data + offset + size - 1) & 4) &&
2756                    size > 4))
2757                         size -= 4;
2758
2759                 buffer_info->length = size;
2760                 buffer_info->dma =
2761                         pci_map_single(adapter->pdev,
2762                                 skb->data + offset,
2763                                 size,
2764                                 PCI_DMA_TODEVICE);
2765                 buffer_info->time_stamp = jiffies;
2766
2767                 len -= size;
2768                 offset += size;
2769                 count++;
2770                 if (unlikely(++i == tx_ring->count)) i = 0;
2771         }
2772
2773         for (f = 0; f < nr_frags; f++) {
2774                 struct skb_frag_struct *frag;
2775
2776                 frag = &skb_shinfo(skb)->frags[f];
2777                 len = frag->size;
2778                 offset = frag->page_offset;
2779
2780                 while (len) {
2781                         buffer_info = &tx_ring->buffer_info[i];
2782                         size = min(len, max_per_txd);
2783 #ifdef NETIF_F_TSO
2784                         /* Workaround for premature desc write-backs
2785                          * in TSO mode.  Append 4-byte sentinel desc */
2786                         if (unlikely(mss && f == (nr_frags-1) && size == len && size > 8))
2787                                 size -= 4;
2788 #endif
2789                         /* Workaround for potential 82544 hang in PCI-X.
2790                          * Avoid terminating buffers within evenly-aligned
2791                          * dwords. */
2792                         if (unlikely(adapter->pcix_82544 &&
2793                            !((unsigned long)(frag->page+offset+size-1) & 4) &&
2794                            size > 4))
2795                                 size -= 4;
2796
2797                         buffer_info->length = size;
2798                         buffer_info->dma =
2799                                 pci_map_page(adapter->pdev,
2800                                         frag->page,
2801                                         offset,
2802                                         size,
2803                                         PCI_DMA_TODEVICE);
2804                         buffer_info->time_stamp = jiffies;
2805
2806                         len -= size;
2807                         offset += size;
2808                         count++;
2809                         if (unlikely(++i == tx_ring->count)) i = 0;
2810                 }
2811         }
2812
2813         i = (i == 0) ? tx_ring->count - 1 : i - 1;
2814         tx_ring->buffer_info[i].skb = skb;
2815         tx_ring->buffer_info[first].next_to_watch = i;
2816
2817         return count;
2818 }
2819
2820 static void
2821 e1000_tx_queue(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
2822                int tx_flags, int count)
2823 {
2824         struct e1000_tx_desc *tx_desc = NULL;
2825         struct e1000_buffer *buffer_info;
2826         uint32_t txd_upper = 0, txd_lower = E1000_TXD_CMD_IFCS;
2827         unsigned int i;
2828
2829         if (likely(tx_flags & E1000_TX_FLAGS_TSO)) {
2830                 txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D |
2831                              E1000_TXD_CMD_TSE;
2832                 txd_upper |= E1000_TXD_POPTS_TXSM << 8;
2833
2834                 if (likely(tx_flags & E1000_TX_FLAGS_IPV4))
2835                         txd_upper |= E1000_TXD_POPTS_IXSM << 8;
2836         }
2837
2838         if (likely(tx_flags & E1000_TX_FLAGS_CSUM)) {
2839                 txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D;
2840                 txd_upper |= E1000_TXD_POPTS_TXSM << 8;
2841         }
2842
2843         if (unlikely(tx_flags & E1000_TX_FLAGS_VLAN)) {
2844                 txd_lower |= E1000_TXD_CMD_VLE;
2845                 txd_upper |= (tx_flags & E1000_TX_FLAGS_VLAN_MASK);
2846         }
2847
2848         i = tx_ring->next_to_use;
2849
2850         while (count--) {
2851                 buffer_info = &tx_ring->buffer_info[i];
2852                 tx_desc = E1000_TX_DESC(*tx_ring, i);
2853                 tx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
2854                 tx_desc->lower.data =
2855                         cpu_to_le32(txd_lower | buffer_info->length);
2856                 tx_desc->upper.data = cpu_to_le32(txd_upper);
2857                 if (unlikely(++i == tx_ring->count)) i = 0;
2858         }
2859
2860         tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd);
2861
2862         /* Force memory writes to complete before letting h/w
2863          * know there are new descriptors to fetch.  (Only
2864          * applicable for weak-ordered memory model archs,
2865          * such as IA-64). */
2866         wmb();
2867
2868         tx_ring->next_to_use = i;
2869         writel(i, adapter->hw.hw_addr + tx_ring->tdt);
2870 }
2871
2872 /**
2873  * 82547 workaround to avoid controller hang in half-duplex environment.
2874  * The workaround is to avoid queuing a large packet that would span
2875  * the internal Tx FIFO ring boundary by notifying the stack to resend
2876  * the packet at a later time.  This gives the Tx FIFO an opportunity to
2877  * flush all packets.  When that occurs, we reset the Tx FIFO pointers
2878  * to the beginning of the Tx FIFO.
2879  **/
2880
2881 #define E1000_FIFO_HDR                  0x10
2882 #define E1000_82547_PAD_LEN             0x3E0
2883
2884 static int
2885 e1000_82547_fifo_workaround(struct e1000_adapter *adapter, struct sk_buff *skb)
2886 {
2887         uint32_t fifo_space = adapter->tx_fifo_size - adapter->tx_fifo_head;
2888         uint32_t skb_fifo_len = skb->len + E1000_FIFO_HDR;
2889
2890         E1000_ROUNDUP(skb_fifo_len, E1000_FIFO_HDR);
2891
2892         if (adapter->link_duplex != HALF_DUPLEX)
2893                 goto no_fifo_stall_required;
2894
2895         if (atomic_read(&adapter->tx_fifo_stall))
2896                 return 1;
2897
2898         if (skb_fifo_len >= (E1000_82547_PAD_LEN + fifo_space)) {
2899                 atomic_set(&adapter->tx_fifo_stall, 1);
2900                 return 1;
2901         }
2902
2903 no_fifo_stall_required:
2904         adapter->tx_fifo_head += skb_fifo_len;
2905         if (adapter->tx_fifo_head >= adapter->tx_fifo_size)
2906                 adapter->tx_fifo_head -= adapter->tx_fifo_size;
2907         return 0;
2908 }
2909
2910 #define MINIMUM_DHCP_PACKET_SIZE 282
2911 static int
2912 e1000_transfer_dhcp_info(struct e1000_adapter *adapter, struct sk_buff *skb)
2913 {
2914         struct e1000_hw *hw =  &adapter->hw;
2915         uint16_t length, offset;
2916         if (vlan_tx_tag_present(skb)) {
2917                 if (!((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) &&
2918                         ( adapter->hw.mng_cookie.status &
2919                           E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) )
2920                         return 0;
2921         }
2922         if (skb->len > MINIMUM_DHCP_PACKET_SIZE) {
2923                 struct ethhdr *eth = (struct ethhdr *) skb->data;
2924                 if ((htons(ETH_P_IP) == eth->h_proto)) {
2925                         const struct iphdr *ip =
2926                                 (struct iphdr *)((uint8_t *)skb->data+14);
2927                         if (IPPROTO_UDP == ip->protocol) {
2928                                 struct udphdr *udp =
2929                                         (struct udphdr *)((uint8_t *)ip +
2930                                                 (ip->ihl << 2));
2931                                 if (ntohs(udp->dest) == 67) {
2932                                         offset = (uint8_t *)udp + 8 - skb->data;
2933                                         length = skb->len - offset;
2934
2935                                         return e1000_mng_write_dhcp_info(hw,
2936                                                         (uint8_t *)udp + 8,
2937                                                         length);
2938                                 }
2939                         }
2940                 }
2941         }
2942         return 0;
2943 }
2944
2945 static int __e1000_maybe_stop_tx(struct net_device *netdev, int size)
2946 {
2947         struct e1000_adapter *adapter = netdev_priv(netdev);
2948         struct e1000_tx_ring *tx_ring = adapter->tx_ring;
2949
2950         netif_stop_queue(netdev);
2951         /* Herbert's original patch had:
2952          *  smp_mb__after_netif_stop_queue();
2953          * but since that doesn't exist yet, just open code it. */
2954         smp_mb();
2955
2956         /* We need to check again in a case another CPU has just
2957          * made room available. */
2958         if (likely(E1000_DESC_UNUSED(tx_ring) < size))
2959                 return -EBUSY;
2960
2961         /* A reprieve! */
2962         netif_start_queue(netdev);
2963         return 0;
2964 }
2965
2966 static int e1000_maybe_stop_tx(struct net_device *netdev,
2967                                struct e1000_tx_ring *tx_ring, int size)
2968 {
2969         if (likely(E1000_DESC_UNUSED(tx_ring) >= size))
2970                 return 0;
2971         return __e1000_maybe_stop_tx(netdev, size);
2972 }
2973
2974 #define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
2975 static int
2976 e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
2977 {
2978         struct e1000_adapter *adapter = netdev_priv(netdev);
2979         struct e1000_tx_ring *tx_ring;
2980         unsigned int first, max_per_txd = E1000_MAX_DATA_PER_TXD;
2981         unsigned int max_txd_pwr = E1000_MAX_TXD_PWR;
2982         unsigned int tx_flags = 0;
2983         unsigned int len = skb->len;
2984         unsigned long flags;
2985         unsigned int nr_frags = 0;
2986         unsigned int mss = 0;
2987         int count = 0;
2988         int tso;
2989         unsigned int f;
2990         len -= skb->data_len;
2991
2992         /* This goes back to the question of how to logically map a tx queue
2993          * to a flow.  Right now, performance is impacted slightly negatively
2994          * if using multiple tx queues.  If the stack breaks away from a
2995          * single qdisc implementation, we can look at this again. */
2996         tx_ring = adapter->tx_ring;
2997
2998         if (unlikely(skb->len <= 0)) {
2999                 dev_kfree_skb_any(skb);
3000                 return NETDEV_TX_OK;
3001         }
3002
3003         /* 82571 and newer doesn't need the workaround that limited descriptor
3004          * length to 4kB */
3005         if (adapter->hw.mac_type >= e1000_82571)
3006                 max_per_txd = 8192;
3007
3008 #ifdef NETIF_F_TSO
3009         mss = skb_shinfo(skb)->gso_size;
3010         /* The controller does a simple calculation to
3011          * make sure there is enough room in the FIFO before
3012          * initiating the DMA for each buffer.  The calc is:
3013          * 4 = ceil(buffer len/mss).  To make sure we don't
3014          * overrun the FIFO, adjust the max buffer len if mss
3015          * drops. */
3016         if (mss) {
3017                 uint8_t hdr_len;
3018                 max_per_txd = min(mss << 2, max_per_txd);
3019                 max_txd_pwr = fls(max_per_txd) - 1;
3020
3021                 /* TSO Workaround for 82571/2/3 Controllers -- if skb->data
3022                 * points to just header, pull a few bytes of payload from
3023                 * frags into skb->data */
3024                 hdr_len = ((skb->h.raw - skb->data) + (skb->h.th->doff << 2));
3025                 if (skb->data_len && (hdr_len == (skb->len - skb->data_len))) {
3026                         switch (adapter->hw.mac_type) {
3027                                 unsigned int pull_size;
3028                         case e1000_82571:
3029                         case e1000_82572:
3030                         case e1000_82573:
3031                         case e1000_ich8lan:
3032                                 pull_size = min((unsigned int)4, skb->data_len);
3033                                 if (!__pskb_pull_tail(skb, pull_size)) {
3034                                         DPRINTK(DRV, ERR,
3035                                                 "__pskb_pull_tail failed.\n");
3036                                         dev_kfree_skb_any(skb);
3037                                         return NETDEV_TX_OK;
3038                                 }
3039                                 len = skb->len - skb->data_len;
3040                                 break;
3041                         default:
3042                                 /* do nothing */
3043                                 break;
3044                         }
3045                 }
3046         }
3047
3048         /* reserve a descriptor for the offload context */
3049         if ((mss) || (skb->ip_summed == CHECKSUM_PARTIAL))
3050                 count++;
3051         count++;
3052 #else
3053         if (skb->ip_summed == CHECKSUM_PARTIAL)
3054                 count++;
3055 #endif
3056
3057 #ifdef NETIF_F_TSO
3058         /* Controller Erratum workaround */
3059         if (!skb->data_len && tx_ring->last_tx_tso && !skb_is_gso(skb))
3060                 count++;
3061 #endif
3062
3063         count += TXD_USE_COUNT(len, max_txd_pwr);
3064
3065         if (adapter->pcix_82544)
3066                 count++;
3067
3068         /* work-around for errata 10 and it applies to all controllers
3069          * in PCI-X mode, so add one more descriptor to the count
3070          */
3071         if (unlikely((adapter->hw.bus_type == e1000_bus_type_pcix) &&
3072                         (len > 2015)))
3073                 count++;
3074
3075         nr_frags = skb_shinfo(skb)->nr_frags;
3076         for (f = 0; f < nr_frags; f++)
3077                 count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size,
3078                                        max_txd_pwr);
3079         if (adapter->pcix_82544)
3080                 count += nr_frags;
3081
3082
3083         if (adapter->hw.tx_pkt_filtering &&
3084             (adapter->hw.mac_type == e1000_82573))
3085                 e1000_transfer_dhcp_info(adapter, skb);
3086
3087         local_irq_save(flags);
3088         if (!spin_trylock(&tx_ring->tx_lock)) {
3089                 /* Collision - tell upper layer to requeue */
3090                 local_irq_restore(flags);
3091                 return NETDEV_TX_LOCKED;
3092         }
3093
3094         /* need: count + 2 desc gap to keep tail from touching
3095          * head, otherwise try next time */
3096         if (unlikely(e1000_maybe_stop_tx(netdev, tx_ring, count + 2))) {
3097                 spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
3098                 return NETDEV_TX_BUSY;
3099         }
3100
3101         if (unlikely(adapter->hw.mac_type == e1000_82547)) {
3102                 if (unlikely(e1000_82547_fifo_workaround(adapter, skb))) {
3103                         netif_stop_queue(netdev);
3104                         mod_timer(&adapter->tx_fifo_stall_timer, jiffies + 1);
3105                         spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
3106                         return NETDEV_TX_BUSY;
3107                 }
3108         }
3109
3110         if (unlikely(adapter->vlgrp && vlan_tx_tag_present(skb))) {
3111                 tx_flags |= E1000_TX_FLAGS_VLAN;
3112                 tx_flags |= (vlan_tx_tag_get(skb) << E1000_TX_FLAGS_VLAN_SHIFT);
3113         }
3114
3115         first = tx_ring->next_to_use;
3116
3117         tso = e1000_tso(adapter, tx_ring, skb);
3118         if (tso < 0) {
3119                 dev_kfree_skb_any(skb);
3120                 spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
3121                 return NETDEV_TX_OK;
3122         }
3123
3124         if (likely(tso)) {
3125                 tx_ring->last_tx_tso = 1;
3126                 tx_flags |= E1000_TX_FLAGS_TSO;
3127         } else if (likely(e1000_tx_csum(adapter, tx_ring, skb)))
3128                 tx_flags |= E1000_TX_FLAGS_CSUM;
3129
3130         /* Old method was to assume IPv4 packet by default if TSO was enabled.
3131          * 82571 hardware supports TSO capabilities for IPv6 as well...
3132          * no longer assume, we must. */
3133         if (likely(skb->protocol == htons(ETH_P_IP)))
3134                 tx_flags |= E1000_TX_FLAGS_IPV4;
3135
3136         e1000_tx_queue(adapter, tx_ring, tx_flags,
3137                        e1000_tx_map(adapter, tx_ring, skb, first,
3138                                     max_per_txd, nr_frags, mss));
3139
3140         netdev->trans_start = jiffies;
3141
3142         /* Make sure there is space in the ring for the next send. */
3143         e1000_maybe_stop_tx(netdev, tx_ring, MAX_SKB_FRAGS + 2);
3144
3145         spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
3146         return NETDEV_TX_OK;
3147 }
3148
3149 /**
3150  * e1000_tx_timeout - Respond to a Tx Hang
3151  * @netdev: network interface device structure
3152  **/
3153
3154 static void
3155 e1000_tx_timeout(struct net_device *netdev)
3156 {
3157         struct e1000_adapter *adapter = netdev_priv(netdev);
3158
3159         /* Do the reset outside of interrupt context */
3160         adapter->tx_timeout_count++;
3161         schedule_work(&adapter->reset_task);
3162 }
3163
3164 static void
3165 e1000_reset_task(struct net_device *netdev)
3166 {
3167         struct e1000_adapter *adapter = netdev_priv(netdev);
3168
3169         e1000_reinit_locked(adapter);
3170 }
3171
3172 /**
3173  * e1000_get_stats - Get System Network Statistics
3174  * @netdev: network interface device structure
3175  *
3176  * Returns the address of the device statistics structure.
3177  * The statistics are actually updated from the timer callback.
3178  **/
3179
3180 static struct net_device_stats *
3181 e1000_get_stats(struct net_device *netdev)
3182 {
3183         struct e1000_adapter *adapter = netdev_priv(netdev);
3184
3185         /* only return the current stats */
3186         return &adapter->net_stats;
3187 }
3188
3189 /**
3190  * e1000_change_mtu - Change the Maximum Transfer Unit
3191  * @netdev: network interface device structure
3192  * @new_mtu: new value for maximum frame size
3193  *
3194  * Returns 0 on success, negative on failure
3195  **/
3196
3197 static int
3198 e1000_change_mtu(struct net_device *netdev, int new_mtu)
3199 {
3200         struct e1000_adapter *adapter = netdev_priv(netdev);
3201         int max_frame = new_mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
3202         uint16_t eeprom_data = 0;
3203
3204         if ((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) ||
3205             (max_frame > MAX_JUMBO_FRAME_SIZE)) {
3206                 DPRINTK(PROBE, ERR, "Invalid MTU setting\n");
3207                 return -EINVAL;
3208         }
3209
3210         /* Adapter-specific max frame size limits. */
3211         switch (adapter->hw.mac_type) {
3212         case e1000_undefined ... e1000_82542_rev2_1:
3213         case e1000_ich8lan:
3214                 if (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) {
3215                         DPRINTK(PROBE, ERR, "Jumbo Frames not supported.\n");
3216                         return -EINVAL;
3217                 }
3218                 break;
3219         case e1000_82573:
3220                 /* Jumbo Frames not supported if:
3221                  * - this is not an 82573L device
3222                  * - ASPM is enabled in any way (0x1A bits 3:2) */
3223                 e1000_read_eeprom(&adapter->hw, EEPROM_INIT_3GIO_3, 1,
3224                                   &eeprom_data);
3225                 if ((adapter->hw.device_id != E1000_DEV_ID_82573L) ||
3226                     (eeprom_data & EEPROM_WORD1A_ASPM_MASK)) {
3227                         if (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) {
3228                                 DPRINTK(PROBE, ERR,
3229                                         "Jumbo Frames not supported.\n");
3230                                 return -EINVAL;
3231                         }
3232                         break;
3233                 }
3234                 /* ERT will be enabled later to enable wire speed receives */
3235
3236                 /* fall through to get support */
3237         case e1000_82571:
3238         case e1000_82572:
3239         case e1000_80003es2lan:
3240 #define MAX_STD_JUMBO_FRAME_SIZE 9234
3241                 if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
3242                         DPRINTK(PROBE, ERR, "MTU > 9216 not supported.\n");
3243                         return -EINVAL;
3244                 }
3245                 break;
3246         default:
3247                 /* Capable of supporting up to MAX_JUMBO_FRAME_SIZE limit. */
3248                 break;
3249         }
3250
3251         /* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
3252          * means we reserve 2 more, this pushes us to allocate from the next
3253          * larger slab size
3254          * i.e. RXBUFFER_2048 --> size-4096 slab */
3255
3256         if (max_frame <= E1000_RXBUFFER_256)
3257                 adapter->rx_buffer_len = E1000_RXBUFFER_256;
3258         else if (max_frame <= E1000_RXBUFFER_512)
3259                 adapter->rx_buffer_len = E1000_RXBUFFER_512;
3260         else if (max_frame <= E1000_RXBUFFER_1024)
3261                 adapter->rx_buffer_len = E1000_RXBUFFER_1024;
3262         else if (max_frame <= E1000_RXBUFFER_2048)
3263                 adapter->rx_buffer_len = E1000_RXBUFFER_2048;
3264         else if (max_frame <= E1000_RXBUFFER_4096)
3265                 adapter->rx_buffer_len = E1000_RXBUFFER_4096;
3266         else if (max_frame <= E1000_RXBUFFER_8192)
3267                 adapter->rx_buffer_len = E1000_RXBUFFER_8192;
3268         else if (max_frame <= E1000_RXBUFFER_16384)
3269                 adapter->rx_buffer_len = E1000_RXBUFFER_16384;
3270
3271         /* adjust allocation if LPE protects us, and we aren't using SBP */
3272         if (!adapter->hw.tbi_compatibility_on &&
3273             ((max_frame == MAXIMUM_ETHERNET_FRAME_SIZE) ||
3274              (max_frame == MAXIMUM_ETHERNET_VLAN_SIZE)))
3275                 adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
3276
3277         netdev->mtu = new_mtu;
3278
3279         if (netif_running(netdev))
3280                 e1000_reinit_locked(adapter);
3281
3282         adapter->hw.max_frame_size = max_frame;
3283
3284         return 0;
3285 }
3286
3287 /**
3288  * e1000_update_stats - Update the board statistics counters
3289  * @adapter: board private structure
3290  **/
3291
3292 void
3293 e1000_update_stats(struct e1000_adapter *adapter)
3294 {
3295         struct e1000_hw *hw = &adapter->hw;
3296         struct pci_dev *pdev = adapter->pdev;
3297         unsigned long flags;
3298         uint16_t phy_tmp;
3299
3300 #define PHY_IDLE_ERROR_COUNT_MASK 0x00FF
3301
3302         /*
3303          * Prevent stats update while adapter is being reset, or if the pci
3304          * connection is down.
3305          */
3306         if (adapter->link_speed == 0)
3307                 return;
3308         if (pdev->error_state && pdev->error_state != pci_channel_io_normal)
3309                 return;
3310
3311         spin_lock_irqsave(&adapter->stats_lock, flags);
3312
3313         /* these counters are modified from e1000_adjust_tbi_stats,
3314          * called from the interrupt context, so they must only
3315          * be written while holding adapter->stats_lock
3316          */
3317
3318         adapter->stats.crcerrs += E1000_READ_REG(hw, CRCERRS);
3319         adapter->stats.gprc += E1000_READ_REG(hw, GPRC);
3320         adapter->stats.gorcl += E1000_READ_REG(hw, GORCL);
3321         adapter->stats.gorch += E1000_READ_REG(hw, GORCH);
3322         adapter->stats.bprc += E1000_READ_REG(hw, BPRC);
3323         adapter->stats.mprc += E1000_READ_REG(hw, MPRC);
3324         adapter->stats.roc += E1000_READ_REG(hw, ROC);
3325
3326         if (adapter->hw.mac_type != e1000_ich8lan) {
3327                 adapter->stats.prc64 += E1000_READ_REG(hw, PRC64);
3328                 adapter->stats.prc127 += E1000_READ_REG(hw, PRC127);
3329                 adapter->stats.prc255 += E1000_READ_REG(hw, PRC255);
3330                 adapter->stats.prc511 += E1000_READ_REG(hw, PRC511);
3331                 adapter->stats.prc1023 += E1000_READ_REG(hw, PRC1023);
3332                 adapter->stats.prc1522 += E1000_READ_REG(hw, PRC1522);
3333         }
3334
3335         adapter->stats.symerrs += E1000_READ_REG(hw, SYMERRS);
3336         adapter->stats.mpc += E1000_READ_REG(hw, MPC);
3337         adapter->stats.scc += E1000_READ_REG(hw, SCC);
3338         adapter->stats.ecol += E1000_READ_REG(hw, ECOL);
3339         adapter->stats.mcc += E1000_READ_REG(hw, MCC);
3340         adapter->stats.latecol += E1000_READ_REG(hw, LATECOL);
3341         adapter->stats.dc += E1000_READ_REG(hw, DC);
3342         adapter->stats.sec += E1000_READ_REG(hw, SEC);
3343         adapter->stats.rlec += E1000_READ_REG(hw, RLEC);
3344         adapter->stats.xonrxc += E1000_READ_REG(hw, XONRXC);
3345         adapter->stats.xontxc += E1000_READ_REG(hw, XONTXC);
3346         adapter->stats.xoffrxc += E1000_READ_REG(hw, XOFFRXC);
3347         adapter->stats.xofftxc += E1000_READ_REG(hw, XOFFTXC);
3348         adapter->stats.fcruc += E1000_READ_REG(hw, FCRUC);
3349         adapter->stats.gptc += E1000_READ_REG(hw, GPTC);
3350         adapter->stats.gotcl += E1000_READ_REG(hw, GOTCL);
3351         adapter->stats.gotch += E1000_READ_REG(hw, GOTCH);
3352         adapter->stats.rnbc += E1000_READ_REG(hw, RNBC);
3353         adapter->stats.ruc += E1000_READ_REG(hw, RUC);
3354         adapter->stats.rfc += E1000_READ_REG(hw, RFC);
3355         adapter->stats.rjc += E1000_READ_REG(hw, RJC);
3356         adapter->stats.torl += E1000_READ_REG(hw, TORL);
3357         adapter->stats.torh += E1000_READ_REG(hw, TORH);
3358         adapter->stats.totl += E1000_READ_REG(hw, TOTL);
3359         adapter->stats.toth += E1000_READ_REG(hw, TOTH);
3360         adapter->stats.tpr += E1000_READ_REG(hw, TPR);
3361
3362         if (adapter->hw.mac_type != e1000_ich8lan) {
3363                 adapter->stats.ptc64 += E1000_READ_REG(hw, PTC64);
3364                 adapter->stats.ptc127 += E1000_READ_REG(hw, PTC127);
3365                 adapter->stats.ptc255 += E1000_READ_REG(hw, PTC255);
3366                 adapter->stats.ptc511 += E1000_READ_REG(hw, PTC511);
3367                 adapter->stats.ptc1023 += E1000_READ_REG(hw, PTC1023);
3368                 adapter->stats.ptc1522 += E1000_READ_REG(hw, PTC1522);
3369         }
3370
3371         adapter->stats.mptc += E1000_READ_REG(hw, MPTC);
3372         adapter->stats.bptc += E1000_READ_REG(hw, BPTC);
3373
3374         /* used for adaptive IFS */
3375
3376         hw->tx_packet_delta = E1000_READ_REG(hw, TPT);
3377         adapter->stats.tpt += hw->tx_packet_delta;
3378         hw->collision_delta = E1000_READ_REG(hw, COLC);
3379         adapter->stats.colc += hw->collision_delta;
3380
3381         if (hw->mac_type >= e1000_82543) {
3382                 adapter->stats.algnerrc += E1000_READ_REG(hw, ALGNERRC);
3383                 adapter->stats.rxerrc += E1000_READ_REG(hw, RXERRC);
3384                 adapter->stats.tncrs += E1000_READ_REG(hw, TNCRS);
3385                 adapter->stats.cexterr += E1000_READ_REG(hw, CEXTERR);
3386                 adapter->stats.tsctc += E1000_READ_REG(hw, TSCTC);
3387                 adapter->stats.tsctfc += E1000_READ_REG(hw, TSCTFC);
3388         }
3389         if (hw->mac_type > e1000_82547_rev_2) {
3390                 adapter->stats.iac += E1000_READ_REG(hw, IAC);
3391                 adapter->stats.icrxoc += E1000_READ_REG(hw, ICRXOC);
3392
3393                 if (adapter->hw.mac_type != e1000_ich8lan) {
3394                         adapter->stats.icrxptc += E1000_READ_REG(hw, ICRXPTC);
3395                         adapter->stats.icrxatc += E1000_READ_REG(hw, ICRXATC);
3396                         adapter->stats.ictxptc += E1000_READ_REG(hw, ICTXPTC);
3397                         adapter->stats.ictxatc += E1000_READ_REG(hw, ICTXATC);
3398                         adapter->stats.ictxqec += E1000_READ_REG(hw, ICTXQEC);
3399                         adapter->stats.ictxqmtc += E1000_READ_REG(hw, ICTXQMTC);
3400                         adapter->stats.icrxdmtc += E1000_READ_REG(hw, ICRXDMTC);
3401                 }
3402         }
3403
3404         /* Fill out the OS statistics structure */
3405         adapter->net_stats.rx_packets = adapter->stats.gprc;
3406         adapter->net_stats.tx_packets = adapter->stats.gptc;
3407         adapter->net_stats.rx_bytes = adapter->stats.gorcl;
3408         adapter->net_stats.tx_bytes = adapter->stats.gotcl;
3409         adapter->net_stats.multicast = adapter->stats.mprc;
3410         adapter->net_stats.collisions = adapter->stats.colc;
3411
3412         /* Rx Errors */
3413
3414         /* RLEC on some newer hardware can be incorrect so build
3415         * our own version based on RUC and ROC */
3416         adapter->net_stats.rx_errors = adapter->stats.rxerrc +
3417                 adapter->stats.crcerrs + adapter->stats.algnerrc +
3418                 adapter->stats.ruc + adapter->stats.roc +
3419                 adapter->stats.cexterr;
3420         adapter->stats.rlerrc = adapter->stats.ruc + adapter->stats.roc;
3421         adapter->net_stats.rx_length_errors = adapter->stats.rlerrc;
3422         adapter->net_stats.rx_crc_errors = adapter->stats.crcerrs;
3423         adapter->net_stats.rx_frame_errors = adapter->stats.algnerrc;
3424         adapter->net_stats.rx_missed_errors = adapter->stats.mpc;
3425
3426         /* Tx Errors */
3427         adapter->stats.txerrc = adapter->stats.ecol + adapter->stats.latecol;
3428         adapter->net_stats.tx_errors = adapter->stats.txerrc;
3429         adapter->net_stats.tx_aborted_errors = adapter->stats.ecol;
3430         adapter->net_stats.tx_window_errors = adapter->stats.latecol;
3431         adapter->net_stats.tx_carrier_errors = adapter->stats.tncrs;
3432
3433         /* Tx Dropped needs to be maintained elsewhere */
3434
3435         /* Phy Stats */
3436         if (hw->media_type == e1000_media_type_copper) {
3437                 if ((adapter->link_speed == SPEED_1000) &&
3438                    (!e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_tmp))) {
3439                         phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK;
3440                         adapter->phy_stats.idle_errors += phy_tmp;
3441                 }
3442
3443                 if ((hw->mac_type <= e1000_82546) &&
3444                    (hw->phy_type == e1000_phy_m88) &&
3445                    !e1000_read_phy_reg(hw, M88E1000_RX_ERR_CNTR, &phy_tmp))
3446                         adapter->phy_stats.receive_errors += phy_tmp;
3447         }
3448
3449         spin_unlock_irqrestore(&adapter->stats_lock, flags);
3450 }
3451
3452 /**
3453  * e1000_intr - Interrupt Handler
3454  * @irq: interrupt number
3455  * @data: pointer to a network interface device structure
3456  **/
3457
3458 static irqreturn_t
3459 e1000_intr(int irq, void *data)
3460 {
3461         struct net_device *netdev = data;
3462         struct e1000_adapter *adapter = netdev_priv(netdev);
3463         struct e1000_hw *hw = &adapter->hw;
3464         uint32_t rctl, icr = E1000_READ_REG(hw, ICR);
3465 #ifndef CONFIG_E1000_NAPI
3466         int i;
3467 #else
3468         /* Interrupt Auto-Mask...upon reading ICR,
3469          * interrupts are masked.  No need for the
3470          * IMC write, but it does mean we should
3471          * account for it ASAP. */
3472         if (likely(hw->mac_type >= e1000_82571))
3473                 atomic_inc(&adapter->irq_sem);
3474 #endif
3475
3476         if (unlikely(!icr)) {
3477 #ifdef CONFIG_E1000_NAPI
3478                 if (hw->mac_type >= e1000_82571)
3479                         e1000_irq_enable(adapter);
3480 #endif
3481                 return IRQ_NONE;  /* Not our interrupt */
3482         }
3483
3484         if (unlikely(icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC))) {
3485                 hw->get_link_status = 1;
3486                 /* 80003ES2LAN workaround--
3487                  * For packet buffer work-around on link down event;
3488                  * disable receives here in the ISR and
3489                  * reset adapter in watchdog
3490                  */
3491                 if (netif_carrier_ok(netdev) &&
3492                     (adapter->hw.mac_type == e1000_80003es2lan)) {
3493                         /* disable receives */
3494                         rctl = E1000_READ_REG(hw, RCTL);
3495                         E1000_WRITE_REG(hw, RCTL, rctl & ~E1000_RCTL_EN);
3496                 }
3497                 /* guard against interrupt when we're going down */
3498                 if (!test_bit(__E1000_DOWN, &adapter->flags))
3499                         mod_timer(&adapter->watchdog_timer, jiffies + 1);
3500         }
3501
3502 #ifdef CONFIG_E1000_NAPI
3503         if (unlikely(hw->mac_type < e1000_82571)) {
3504                 atomic_inc(&adapter->irq_sem);
3505                 E1000_WRITE_REG(hw, IMC, ~0);
3506                 E1000_WRITE_FLUSH(hw);
3507         }
3508         if (likely(netif_rx_schedule_prep(netdev)))
3509                 __netif_rx_schedule(netdev);
3510         else
3511                 /* this really should not happen! if it does it is basically a
3512                  * bug, but not a hard error, so enable ints and continue */
3513                 e1000_irq_enable(adapter);
3514 #else
3515         /* Writing IMC and IMS is needed for 82547.
3516          * Due to Hub Link bus being occupied, an interrupt
3517          * de-assertion message is not able to be sent.
3518          * When an interrupt assertion message is generated later,
3519          * two messages are re-ordered and sent out.
3520          * That causes APIC to think 82547 is in de-assertion
3521          * state, while 82547 is in assertion state, resulting
3522          * in dead lock. Writing IMC forces 82547 into
3523          * de-assertion state.
3524          */
3525         if (hw->mac_type == e1000_82547 || hw->mac_type == e1000_82547_rev_2) {
3526                 atomic_inc(&adapter->irq_sem);
3527                 E1000_WRITE_REG(hw, IMC, ~0);
3528         }
3529
3530         for (i = 0; i < E1000_MAX_INTR; i++)
3531                 if (unlikely(!adapter->clean_rx(adapter, adapter->rx_ring) &
3532                    !e1000_clean_tx_irq(adapter, adapter->tx_ring)))
3533                         break;
3534
3535         if (hw->mac_type == e1000_82547 || hw->mac_type == e1000_82547_rev_2)
3536                 e1000_irq_enable(adapter);
3537
3538 #endif
3539         return IRQ_HANDLED;
3540 }
3541
3542 #ifdef CONFIG_E1000_NAPI
3543 /**
3544  * e1000_clean - NAPI Rx polling callback
3545  * @adapter: board private structure
3546  **/
3547
3548 static int
3549 e1000_clean(struct net_device *poll_dev, int *budget)
3550 {
3551         struct e1000_adapter *adapter;
3552         int work_to_do = min(*budget, poll_dev->quota);
3553         int tx_cleaned = 0, work_done = 0;
3554
3555         /* Must NOT use netdev_priv macro here. */
3556         adapter = poll_dev->priv;
3557
3558         /* Keep link state information with original netdev */
3559         if (!netif_carrier_ok(poll_dev))
3560                 goto quit_polling;
3561
3562         /* e1000_clean is called per-cpu.  This lock protects
3563          * tx_ring[0] from being cleaned by multiple cpus
3564          * simultaneously.  A failure obtaining the lock means
3565          * tx_ring[0] is currently being cleaned anyway. */
3566         if (spin_trylock(&adapter->tx_queue_lock)) {
3567                 tx_cleaned = e1000_clean_tx_irq(adapter,
3568                                                 &adapter->tx_ring[0]);
3569                 spin_unlock(&adapter->tx_queue_lock);
3570         }
3571
3572         adapter->clean_rx(adapter, &adapter->rx_ring[0],
3573                           &work_done, work_to_do);
3574
3575         *budget -= work_done;
3576         poll_dev->quota -= work_done;
3577
3578         /* If no Tx and not enough Rx work done, exit the polling mode */
3579         if ((!tx_cleaned && (work_done == 0)) ||
3580            !netif_running(poll_dev)) {
3581 quit_polling:
3582                 netif_rx_complete(poll_dev);
3583                 e1000_irq_enable(adapter);
3584                 return 0;
3585         }
3586
3587         return 1;
3588 }
3589
3590 #endif
3591 /**
3592  * e1000_clean_tx_irq - Reclaim resources after transmit completes
3593  * @adapter: board private structure
3594  **/
3595
3596 static boolean_t
3597 e1000_clean_tx_irq(struct e1000_adapter *adapter,
3598                    struct e1000_tx_ring *tx_ring)
3599 {
3600         struct net_device *netdev = adapter->netdev;
3601         struct e1000_tx_desc *tx_desc, *eop_desc;
3602         struct e1000_buffer *buffer_info;
3603         unsigned int i, eop;
3604 #ifdef CONFIG_E1000_NAPI
3605         unsigned int count = 0;
3606 #endif
3607         boolean_t cleaned = FALSE;
3608
3609         i = tx_ring->next_to_clean;
3610         eop = tx_ring->buffer_info[i].next_to_watch;
3611         eop_desc = E1000_TX_DESC(*tx_ring, eop);
3612
3613         while (eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) {
3614                 for (cleaned = FALSE; !cleaned; ) {
3615                         tx_desc = E1000_TX_DESC(*tx_ring, i);
3616                         buffer_info = &tx_ring->buffer_info[i];
3617                         cleaned = (i == eop);
3618
3619                         e1000_unmap_and_free_tx_resource(adapter, buffer_info);
3620                         memset(tx_desc, 0, sizeof(struct e1000_tx_desc));
3621
3622                         if (unlikely(++i == tx_ring->count)) i = 0;
3623                 }
3624
3625                 eop = tx_ring->buffer_info[i].next_to_watch;
3626                 eop_desc = E1000_TX_DESC(*tx_ring, eop);
3627 #ifdef CONFIG_E1000_NAPI
3628 #define E1000_TX_WEIGHT 64
3629                 /* weight of a sort for tx, to avoid endless transmit cleanup */
3630                 if (count++ == E1000_TX_WEIGHT) break;
3631 #endif
3632         }
3633
3634         tx_ring->next_to_clean = i;
3635
3636 #define TX_WAKE_THRESHOLD 32
3637         if (unlikely(cleaned && netif_carrier_ok(netdev) &&
3638                      E1000_DESC_UNUSED(tx_ring) >= TX_WAKE_THRESHOLD)) {
3639                 /* Make sure that anybody stopping the queue after this
3640                  * sees the new next_to_clean.
3641                  */
3642                 smp_mb();
3643                 if (netif_queue_stopped(netdev))
3644                         netif_wake_queue(netdev);
3645         }
3646
3647         if (adapter->detect_tx_hung) {
3648                 /* Detect a transmit hang in hardware, this serializes the
3649                  * check with the clearing of time_stamp and movement of i */
3650                 adapter->detect_tx_hung = FALSE;
3651                 if (tx_ring->buffer_info[eop].dma &&
3652                     time_after(jiffies, tx_ring->buffer_info[eop].time_stamp +
3653                                (adapter->tx_timeout_factor * HZ))
3654                     && !(E1000_READ_REG(&adapter->hw, STATUS) &
3655                          E1000_STATUS_TXOFF)) {
3656
3657                         /* detected Tx unit hang */
3658                         DPRINTK(DRV, ERR, "Detected Tx Unit Hang\n"
3659                                         "  Tx Queue             <%lu>\n"
3660                                         "  TDH                  <%x>\n"
3661                                         "  TDT                  <%x>\n"
3662                                         "  next_to_use          <%x>\n"
3663                                         "  next_to_clean        <%x>\n"
3664                                         "buffer_info[next_to_clean]\n"
3665                                         "  time_stamp           <%lx>\n"
3666                                         "  next_to_watch        <%x>\n"
3667                                         "  jiffies              <%lx>\n"
3668                                         "  next_to_watch.status <%x>\n",
3669                                 (unsigned long)((tx_ring - adapter->tx_ring) /
3670                                         sizeof(struct e1000_tx_ring)),
3671                                 readl(adapter->hw.hw_addr + tx_ring->tdh),
3672                                 readl(adapter->hw.hw_addr + tx_ring->tdt),
3673                                 tx_ring->next_to_use,
3674                                 tx_ring->next_to_clean,
3675                                 tx_ring->buffer_info[eop].time_stamp,
3676                                 eop,
3677                                 jiffies,
3678                                 eop_desc->upper.fields.status);
3679                         netif_stop_queue(netdev);
3680                 }
3681         }
3682         return cleaned;
3683 }
3684
3685 /**
3686  * e1000_rx_checksum - Receive Checksum Offload for 82543
3687  * @adapter:     board private structure
3688  * @status_err:  receive descriptor status and error fields
3689  * @csum:        receive descriptor csum field
3690  * @sk_buff:     socket buffer with received data
3691  **/
3692
3693 static void
3694 e1000_rx_checksum(struct e1000_adapter *adapter,
3695                   uint32_t status_err, uint32_t csum,
3696                   struct sk_buff *skb)
3697 {
3698         uint16_t status = (uint16_t)status_err;
3699         uint8_t errors = (uint8_t)(status_err >> 24);
3700         skb->ip_summed = CHECKSUM_NONE;
3701
3702         /* 82543 or newer only */
3703         if (unlikely(adapter->hw.mac_type < e1000_82543)) return;
3704         /* Ignore Checksum bit is set */
3705         if (unlikely(status & E1000_RXD_STAT_IXSM)) return;
3706         /* TCP/UDP checksum error bit is set */
3707         if (unlikely(errors & E1000_RXD_ERR_TCPE)) {
3708                 /* let the stack verify checksum errors */
3709                 adapter->hw_csum_err++;
3710                 return;
3711         }
3712         /* TCP/UDP Checksum has not been calculated */
3713         if (adapter->hw.mac_type <= e1000_82547_rev_2) {
3714                 if (!(status & E1000_RXD_STAT_TCPCS))
3715                         return;
3716         } else {
3717                 if (!(status & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS)))
3718                         return;
3719         }
3720         /* It must be a TCP or UDP packet with a valid checksum */
3721         if (likely(status & E1000_RXD_STAT_TCPCS)) {
3722                 /* TCP checksum is good */
3723                 skb->ip_summed = CHECKSUM_UNNECESSARY;
3724         } else if (adapter->hw.mac_type > e1000_82547_rev_2) {
3725                 /* IP fragment with UDP payload */
3726                 /* Hardware complements the payload checksum, so we undo it
3727                  * and then put the value in host order for further stack use.
3728                  */
3729                 csum = ntohl(csum ^ 0xFFFF);
3730                 skb->csum = csum;
3731                 skb->ip_summed = CHECKSUM_COMPLETE;
3732         }
3733         adapter->hw_csum_good++;
3734 }
3735
3736 /**
3737  * e1000_clean_rx_irq - Send received data up the network stack; legacy
3738  * @adapter: board private structure
3739  **/
3740
3741 static boolean_t
3742 #ifdef CONFIG_E1000_NAPI
3743 e1000_clean_rx_irq(struct e1000_adapter *adapter,
3744                    struct e1000_rx_ring *rx_ring,
3745                    int *work_done, int work_to_do)
3746 #else
3747 e1000_clean_rx_irq(struct e1000_adapter *adapter,
3748                    struct e1000_rx_ring *rx_ring)
3749 #endif
3750 {
3751         struct net_device *netdev = adapter->netdev;
3752         struct pci_dev *pdev = adapter->pdev;
3753         struct e1000_rx_desc *rx_desc, *next_rxd;
3754         struct e1000_buffer *buffer_info, *next_buffer;
3755         unsigned long flags;
3756         uint32_t length;
3757         uint8_t last_byte;
3758         unsigned int i;
3759         int cleaned_count = 0;
3760         boolean_t cleaned = FALSE;
3761
3762         i = rx_ring->next_to_clean;
3763         rx_desc = E1000_RX_DESC(*rx_ring, i);
3764         buffer_info = &rx_ring->buffer_info[i];
3765
3766         while (rx_desc->status & E1000_RXD_STAT_DD) {
3767                 struct sk_buff *skb;
3768                 u8 status;
3769
3770 #ifdef CONFIG_E1000_NAPI
3771                 if (*work_done >= work_to_do)
3772                         break;
3773                 (*work_done)++;
3774 #endif
3775                 status = rx_desc->status;
3776                 skb = buffer_info->skb;
3777                 buffer_info->skb = NULL;
3778
3779                 prefetch(skb->data - NET_IP_ALIGN);
3780
3781                 if (++i == rx_ring->count) i = 0;
3782                 next_rxd = E1000_RX_DESC(*rx_ring, i);
3783                 prefetch(next_rxd);
3784
3785                 next_buffer = &rx_ring->buffer_info[i];
3786
3787                 cleaned = TRUE;
3788                 cleaned_count++;
3789                 pci_unmap_single(pdev,
3790                                  buffer_info->dma,
3791                                  buffer_info->length,
3792                                  PCI_DMA_FROMDEVICE);
3793
3794                 length = le16_to_cpu(rx_desc->length);
3795
3796                 if (unlikely(!(status & E1000_RXD_STAT_EOP))) {
3797                         /* All receives must fit into a single buffer */
3798                         E1000_DBG("%s: Receive packet consumed multiple"
3799                                   " buffers\n", netdev->name);
3800                         /* recycle */
3801                         buffer_info->skb = skb;
3802                         goto next_desc;
3803                 }
3804
3805                 if (unlikely(rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK)) {
3806                         last_byte = *(skb->data + length - 1);
3807                         if (TBI_ACCEPT(&adapter->hw, status,
3808                                       rx_desc->errors, length, last_byte)) {
3809                                 spin_lock_irqsave(&adapter->stats_lock, flags);
3810                                 e1000_tbi_adjust_stats(&adapter->hw,
3811                                                        &adapter->stats,
3812                                                        length, skb->data);
3813                                 spin_unlock_irqrestore(&adapter->stats_lock,
3814                                                        flags);
3815                                 length--;
3816                         } else {
3817                                 /* recycle */
3818                                 buffer_info->skb = skb;
3819                                 goto next_desc;
3820                         }
3821                 }
3822
3823                 /* adjust length to remove Ethernet CRC, this must be
3824                  * done after the TBI_ACCEPT workaround above */
3825                 length -= 4;
3826
3827                 /* code added for copybreak, this should improve
3828                  * performance for small packets with large amounts
3829                  * of reassembly being done in the stack */
3830 #define E1000_CB_LENGTH 256
3831                 if (length < E1000_CB_LENGTH) {
3832                         struct sk_buff *new_skb =
3833                             netdev_alloc_skb(netdev, length + NET_IP_ALIGN);
3834                         if (new_skb) {
3835                                 skb_reserve(new_skb, NET_IP_ALIGN);
3836                                 memcpy(new_skb->data - NET_IP_ALIGN,
3837                                        skb->data - NET_IP_ALIGN,
3838                                        length + NET_IP_ALIGN);
3839                                 /* save the skb in buffer_info as good */
3840                                 buffer_info->skb = skb;
3841                                 skb = new_skb;
3842                                 skb_put(skb, length);
3843                         }
3844                 } else
3845                         skb_put(skb, length);
3846
3847                 /* end copybreak code */
3848
3849                 /* Receive Checksum Offload */
3850                 e1000_rx_checksum(adapter,
3851                                   (uint32_t)(status) |
3852                                   ((uint32_t)(rx_desc->errors) << 24),
3853                                   le16_to_cpu(rx_desc->csum), skb);
3854
3855                 skb->protocol = eth_type_trans(skb, netdev);
3856 #ifdef CONFIG_E1000_NAPI
3857                 if (unlikely(adapter->vlgrp &&
3858                             (status & E1000_RXD_STAT_VP))) {
3859                         vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
3860                                                  le16_to_cpu(rx_desc->special) &
3861                                                  E1000_RXD_SPC_VLAN_MASK);
3862                 } else {
3863                         netif_receive_skb(skb);
3864                 }
3865 #else /* CONFIG_E1000_NAPI */
3866                 if (unlikely(adapter->vlgrp &&
3867                             (status & E1000_RXD_STAT_VP))) {
3868                         vlan_hwaccel_rx(skb, adapter->vlgrp,
3869                                         le16_to_cpu(rx_desc->special) &
3870                                         E1000_RXD_SPC_VLAN_MASK);
3871                 } else {
3872                         netif_rx(skb);
3873                 }
3874 #endif /* CONFIG_E1000_NAPI */
3875                 netdev->last_rx = jiffies;
3876
3877 next_desc:
3878                 rx_desc->status = 0;
3879
3880                 /* return some buffers to hardware, one at a time is too slow */
3881                 if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) {
3882                         adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
3883                         cleaned_count = 0;
3884                 }
3885
3886                 /* use prefetched values */
3887                 rx_desc = next_rxd;
3888                 buffer_info = next_buffer;
3889         }
3890         rx_ring->next_to_clean = i;
3891
3892         cleaned_count = E1000_DESC_UNUSED(rx_ring);
3893         if (cleaned_count)
3894                 adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
3895
3896         return cleaned;
3897 }
3898
3899 /**
3900  * e1000_clean_rx_irq_ps - Send received data up the network stack; packet split
3901  * @adapter: board private structure
3902  **/
3903
3904 static boolean_t
3905 #ifdef CONFIG_E1000_NAPI
3906 e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
3907                       struct e1000_rx_ring *rx_ring,
3908                       int *work_done, int work_to_do)
3909 #else
3910 e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
3911                       struct e1000_rx_ring *rx_ring)
3912 #endif
3913 {
3914         union e1000_rx_desc_packet_split *rx_desc, *next_rxd;
3915         struct net_device *netdev = adapter->netdev;
3916         struct pci_dev *pdev = adapter->pdev;
3917         struct e1000_buffer *buffer_info, *next_buffer;
3918         struct e1000_ps_page *ps_page;
3919         struct e1000_ps_page_dma *ps_page_dma;
3920         struct sk_buff *skb;
3921         unsigned int i, j;
3922         uint32_t length, staterr;
3923         int cleaned_count = 0;
3924         boolean_t cleaned = FALSE;
3925
3926         i = rx_ring->next_to_clean;
3927         rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
3928         staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
3929         buffer_info = &rx_ring->buffer_info[i];
3930
3931         while (staterr & E1000_RXD_STAT_DD) {
3932                 ps_page = &rx_ring->ps_page[i];
3933                 ps_page_dma = &rx_ring->ps_page_dma[i];
3934 #ifdef CONFIG_E1000_NAPI
3935                 if (unlikely(*work_done >= work_to_do))
3936                         break;
3937                 (*work_done)++;
3938 #endif
3939                 skb = buffer_info->skb;
3940
3941                 /* in the packet split case this is header only */
3942                 prefetch(skb->data - NET_IP_ALIGN);
3943
3944                 if (++i == rx_ring->count) i = 0;
3945                 next_rxd = E1000_RX_DESC_PS(*rx_ring, i);
3946                 prefetch(next_rxd);
3947
3948                 next_buffer = &rx_ring->buffer_info[i];
3949
3950                 cleaned = TRUE;
3951                 cleaned_count++;
3952                 pci_unmap_single(pdev, buffer_info->dma,
3953                                  buffer_info->length,
3954                                  PCI_DMA_FROMDEVICE);
3955
3956                 if (unlikely(!(staterr & E1000_RXD_STAT_EOP))) {
3957                         E1000_DBG("%s: Packet Split buffers didn't pick up"
3958                                   " the full packet\n", netdev->name);
3959                         dev_kfree_skb_irq(skb);
3960                         goto next_desc;
3961                 }
3962
3963                 if (unlikely(staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK)) {
3964                         dev_kfree_skb_irq(skb);
3965                         goto next_desc;
3966                 }
3967
3968                 length = le16_to_cpu(rx_desc->wb.middle.length0);
3969
3970                 if (unlikely(!length)) {
3971                         E1000_DBG("%s: Last part of the packet spanning"
3972                                   " multiple descriptors\n", netdev->name);
3973                         dev_kfree_skb_irq(skb);
3974                         goto next_desc;
3975                 }
3976
3977                 /* Good Receive */
3978                 skb_put(skb, length);
3979
3980                 {
3981                 /* this looks ugly, but it seems compiler issues make it
3982                    more efficient than reusing j */
3983                 int l1 = le16_to_cpu(rx_desc->wb.upper.length[0]);
3984
3985                 /* page alloc/put takes too long and effects small packet
3986                  * throughput, so unsplit small packets and save the alloc/put*/
3987                 if (l1 && ((length + l1) <= adapter->rx_ps_bsize0)) {
3988                         u8 *vaddr;
3989                         /* there is no documentation about how to call
3990                          * kmap_atomic, so we can't hold the mapping
3991                          * very long */
3992                         pci_dma_sync_single_for_cpu(pdev,
3993                                 ps_page_dma->ps_page_dma[0],
3994                                 PAGE_SIZE,
3995                                 PCI_DMA_FROMDEVICE);
3996                         vaddr = kmap_atomic(ps_page->ps_page[0],
3997                                             KM_SKB_DATA_SOFTIRQ);
3998                         memcpy(skb->tail, vaddr, l1);
3999                         kunmap_atomic(vaddr, KM_SKB_DATA_SOFTIRQ);
4000                         pci_dma_sync_single_for_device(pdev,
4001                                 ps_page_dma->ps_page_dma[0],
4002                                 PAGE_SIZE, PCI_DMA_FROMDEVICE);
4003                         /* remove the CRC */
4004                         l1 -= 4;
4005                         skb_put(skb, l1);
4006                         goto copydone;
4007                 } /* if */
4008                 }
4009
4010                 for (j = 0; j < adapter->rx_ps_pages; j++) {
4011                         if (!(length= le16_to_cpu(rx_desc->wb.upper.length[j])))
4012                                 break;
4013                         pci_unmap_page(pdev, ps_page_dma->ps_page_dma[j],
4014                                         PAGE_SIZE, PCI_DMA_FROMDEVICE);
4015                         ps_page_dma->ps_page_dma[j] = 0;
4016                         skb_fill_page_desc(skb, j, ps_page->ps_page[j], 0,
4017                                            length);
4018                         ps_page->ps_page[j] = NULL;
4019                         skb->len += length;
4020                         skb->data_len += length;
4021                         skb->truesize += length;
4022                 }
4023
4024                 /* strip the ethernet crc, problem is we're using pages now so
4025                  * this whole operation can get a little cpu intensive */
4026                 pskb_trim(skb, skb->len - 4);
4027
4028 copydone:
4029                 e1000_rx_checksum(adapter, staterr,
4030                                   le16_to_cpu(rx_desc->wb.lower.hi_dword.csum_ip.csum), skb);
4031                 skb->protocol = eth_type_trans(skb, netdev);
4032
4033                 if (likely(rx_desc->wb.upper.header_status &
4034                            cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP)))
4035                         adapter->rx_hdr_split++;
4036 #ifdef CONFIG_E1000_NAPI
4037                 if (unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) {
4038                         vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
4039                                 le16_to_cpu(rx_desc->wb.middle.vlan) &
4040                                 E1000_RXD_SPC_VLAN_MASK);
4041                 } else {
4042                         netif_receive_skb(skb);
4043                 }
4044 #else /* CONFIG_E1000_NAPI */
4045                 if (unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) {
4046                         vlan_hwaccel_rx(skb, adapter->vlgrp,
4047                                 le16_to_cpu(rx_desc->wb.middle.vlan) &
4048                                 E1000_RXD_SPC_VLAN_MASK);
4049                 } else {
4050                         netif_rx(skb);
4051                 }
4052 #endif /* CONFIG_E1000_NAPI */
4053                 netdev->last_rx = jiffies;
4054
4055 next_desc:
4056                 rx_desc->wb.middle.status_error &= cpu_to_le32(~0xFF);
4057                 buffer_info->skb = NULL;
4058
4059                 /* return some buffers to hardware, one at a time is too slow */
4060                 if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) {
4061                         adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
4062                         cleaned_count = 0;
4063                 }
4064
4065                 /* use prefetched values */
4066                 rx_desc = next_rxd;
4067                 buffer_info = next_buffer;
4068
4069                 staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
4070         }
4071         rx_ring->next_to_clean = i;
4072
4073         cleaned_count = E1000_DESC_UNUSED(rx_ring);
4074         if (cleaned_count)
4075                 adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
4076
4077         return cleaned;
4078 }
4079
4080 /**
4081  * e1000_alloc_rx_buffers - Replace used receive buffers; legacy & extended
4082  * @adapter: address of board private structure
4083  **/
4084
4085 static void
4086 e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
4087                        struct e1000_rx_ring *rx_ring,
4088                        int cleaned_count)
4089 {
4090         struct net_device *netdev = adapter->netdev;
4091         struct pci_dev *pdev = adapter->pdev;
4092         struct e1000_rx_desc *rx_desc;
4093         struct e1000_buffer *buffer_info;
4094         struct sk_buff *skb;
4095         unsigned int i;
4096         unsigned int bufsz = adapter->rx_buffer_len + NET_IP_ALIGN;
4097
4098         i = rx_ring->next_to_use;
4099         buffer_info = &rx_ring->buffer_info[i];
4100
4101         while (cleaned_count--) {
4102                 skb = buffer_info->skb;
4103                 if (skb) {
4104                         skb_trim(skb, 0);
4105                         goto map_skb;
4106                 }
4107
4108                 skb = netdev_alloc_skb(netdev, bufsz);
4109                 if (unlikely(!skb)) {
4110                         /* Better luck next round */
4111                         adapter->alloc_rx_buff_failed++;
4112                         break;
4113                 }
4114
4115                 /* Fix for errata 23, can't cross 64kB boundary */
4116                 if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
4117                         struct sk_buff *oldskb = skb;
4118                         DPRINTK(RX_ERR, ERR, "skb align check failed: %u bytes "
4119                                              "at %p\n", bufsz, skb->data);
4120                         /* Try again, without freeing the previous */
4121                         skb = netdev_alloc_skb(netdev, bufsz);
4122                         /* Failed allocation, critical failure */
4123                         if (!skb) {
4124                                 dev_kfree_skb(oldskb);
4125                                 break;
4126                         }
4127
4128                         if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
4129                                 /* give up */
4130                                 dev_kfree_skb(skb);
4131                                 dev_kfree_skb(oldskb);
4132                                 break; /* while !buffer_info->skb */
4133                         }
4134
4135                         /* Use new allocation */
4136                         dev_kfree_skb(oldskb);
4137                 }
4138                 /* Make buffer alignment 2 beyond a 16 byte boundary
4139                  * this will result in a 16 byte aligned IP header after
4140                  * the 14 byte MAC header is removed
4141                  */
4142                 skb_reserve(skb, NET_IP_ALIGN);
4143
4144                 buffer_info->skb = skb;
4145                 buffer_info->length = adapter->rx_buffer_len;
4146 map_skb:
4147                 buffer_info->dma = pci_map_single(pdev,
4148                                                   skb->data,
4149                                                   adapter->rx_buffer_len,
4150                                                   PCI_DMA_FROMDEVICE);
4151
4152                 /* Fix for errata 23, can't cross 64kB boundary */
4153                 if (!e1000_check_64k_bound(adapter,
4154                                         (void *)(unsigned long)buffer_info->dma,
4155                                         adapter->rx_buffer_len)) {
4156                         DPRINTK(RX_ERR, ERR,
4157                                 "dma align check failed: %u bytes at %p\n",
4158                                 adapter->rx_buffer_len,
4159                                 (void *)(unsigned long)buffer_info->dma);
4160                         dev_kfree_skb(skb);
4161                         buffer_info->skb = NULL;
4162
4163                         pci_unmap_single(pdev, buffer_info->dma,
4164                                          adapter->rx_buffer_len,
4165                                          PCI_DMA_FROMDEVICE);
4166
4167                         break; /* while !buffer_info->skb */
4168                 }
4169                 rx_desc = E1000_RX_DESC(*rx_ring, i);
4170                 rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
4171
4172                 if (unlikely(++i == rx_ring->count))
4173                         i = 0;
4174                 buffer_info = &rx_ring->buffer_info[i];
4175         }
4176
4177         if (likely(rx_ring->next_to_use != i)) {
4178                 rx_ring->next_to_use = i;
4179                 if (unlikely(i-- == 0))
4180                         i = (rx_ring->count - 1);
4181
4182                 /* Force memory writes to complete before letting h/w
4183                  * know there are new descriptors to fetch.  (Only
4184                  * applicable for weak-ordered memory model archs,
4185                  * such as IA-64). */
4186                 wmb();
4187                 writel(i, adapter->hw.hw_addr + rx_ring->rdt);
4188         }
4189 }
4190
4191 /**
4192  * e1000_alloc_rx_buffers_ps - Replace used receive buffers; packet split
4193  * @adapter: address of board private structure
4194  **/
4195
4196 static void
4197 e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
4198                           struct e1000_rx_ring *rx_ring,
4199                           int cleaned_count)
4200 {
4201         struct net_device *netdev = adapter->netdev;
4202         struct pci_dev *pdev = adapter->pdev;
4203         union e1000_rx_desc_packet_split *rx_desc;
4204         struct e1000_buffer *buffer_info;
4205         struct e1000_ps_page *ps_page;
4206         struct e1000_ps_page_dma *ps_page_dma;
4207         struct sk_buff *skb;
4208         unsigned int i, j;
4209
4210         i = rx_ring->next_to_use;
4211         buffer_info = &rx_ring->buffer_info[i];
4212         ps_page = &rx_ring->ps_page[i];
4213         ps_page_dma = &rx_ring->ps_page_dma[i];
4214
4215         while (cleaned_count--) {
4216                 rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
4217
4218                 for (j = 0; j < PS_PAGE_BUFFERS; j++) {
4219                         if (j < adapter->rx_ps_pages) {
4220                                 if (likely(!ps_page->ps_page[j])) {
4221                                         ps_page->ps_page[j] =
4222                                                 alloc_page(GFP_ATOMIC);
4223                                         if (unlikely(!ps_page->ps_page[j])) {
4224                                                 adapter->alloc_rx_buff_failed++;
4225                                                 goto no_buffers;
4226                                         }
4227                                         ps_page_dma->ps_page_dma[j] =
4228                                                 pci_map_page(pdev,
4229                                                             ps_page->ps_page[j],
4230                                                             0, PAGE_SIZE,
4231                                                             PCI_DMA_FROMDEVICE);
4232                                 }
4233                                 /* Refresh the desc even if buffer_addrs didn't
4234                                  * change because each write-back erases
4235                                  * this info.
4236                                  */
4237                                 rx_desc->read.buffer_addr[j+1] =
4238                                      cpu_to_le64(ps_page_dma->ps_page_dma[j]);
4239                         } else
4240                                 rx_desc->read.buffer_addr[j+1] = ~0;
4241                 }
4242
4243                 skb = netdev_alloc_skb(netdev,
4244                                        adapter->rx_ps_bsize0 + NET_IP_ALIGN);
4245
4246                 if (unlikely(!skb)) {
4247                         adapter->alloc_rx_buff_failed++;
4248                         break;
4249                 }
4250
4251                 /* Make buffer alignment 2 beyond a 16 byte boundary
4252                  * this will result in a 16 byte aligned IP header after
4253                  * the 14 byte MAC header is removed
4254                  */
4255                 skb_reserve(skb, NET_IP_ALIGN);
4256
4257                 buffer_info->skb = skb;
4258                 buffer_info->length = adapter->rx_ps_bsize0;
4259                 buffer_info->dma = pci_map_single(pdev, skb->data,
4260                                                   adapter->rx_ps_bsize0,
4261                                                   PCI_DMA_FROMDEVICE);
4262
4263                 rx_desc->read.buffer_addr[0] = cpu_to_le64(buffer_info->dma);
4264
4265                 if (unlikely(++i == rx_ring->count)) i = 0;
4266                 buffer_info = &rx_ring->buffer_info[i];
4267                 ps_page = &rx_ring->ps_page[i];
4268                 ps_page_dma = &rx_ring->ps_page_dma[i];
4269         }
4270
4271 no_buffers:
4272         if (likely(rx_ring->next_to_use != i)) {
4273                 rx_ring->next_to_use = i;
4274                 if (unlikely(i-- == 0)) i = (rx_ring->count - 1);
4275
4276                 /* Force memory writes to complete before letting h/w
4277                  * know there are new descriptors to fetch.  (Only
4278                  * applicable for weak-ordered memory model archs,
4279                  * such as IA-64). */
4280                 wmb();
4281                 /* Hardware increments by 16 bytes, but packet split
4282                  * descriptors are 32 bytes...so we increment tail
4283                  * twice as much.
4284                  */
4285                 writel(i<<1, adapter->hw.hw_addr + rx_ring->rdt);
4286         }
4287 }
4288
4289 /**
4290  * e1000_smartspeed - Workaround for SmartSpeed on 82541 and 82547 controllers.
4291  * @adapter:
4292  **/
4293
4294 static void
4295 e1000_smartspeed(struct e1000_adapter *adapter)
4296 {
4297         uint16_t phy_status;
4298         uint16_t phy_ctrl;
4299
4300         if ((adapter->hw.phy_type != e1000_phy_igp) || !adapter->hw.autoneg ||
4301            !(adapter->hw.autoneg_advertised & ADVERTISE_1000_FULL))
4302                 return;
4303
4304         if (adapter->smartspeed == 0) {
4305                 /* If Master/Slave config fault is asserted twice,
4306                  * we assume back-to-back */
4307                 e1000_read_phy_reg(&adapter->hw, PHY_1000T_STATUS, &phy_status);
4308                 if (!(phy_status & SR_1000T_MS_CONFIG_FAULT)) return;
4309                 e1000_read_phy_reg(&adapter->hw, PHY_1000T_STATUS, &phy_status);
4310                 if (!(phy_status & SR_1000T_MS_CONFIG_FAULT)) return;
4311                 e1000_read_phy_reg(&adapter->hw, PHY_1000T_CTRL, &phy_ctrl);
4312                 if (phy_ctrl & CR_1000T_MS_ENABLE) {
4313                         phy_ctrl &= ~CR_1000T_MS_ENABLE;
4314                         e1000_write_phy_reg(&adapter->hw, PHY_1000T_CTRL,
4315                                             phy_ctrl);
4316                         adapter->smartspeed++;
4317                         if (!e1000_phy_setup_autoneg(&adapter->hw) &&
4318                            !e1000_read_phy_reg(&adapter->hw, PHY_CTRL,
4319                                                &phy_ctrl)) {
4320                                 phy_ctrl |= (MII_CR_AUTO_NEG_EN |
4321                                              MII_CR_RESTART_AUTO_NEG);
4322                                 e1000_write_phy_reg(&adapter->hw, PHY_CTRL,
4323                                                     phy_ctrl);
4324                         }
4325                 }
4326                 return;
4327         } else if (adapter->smartspeed == E1000_SMARTSPEED_DOWNSHIFT) {
4328                 /* If still no link, perhaps using 2/3 pair cable */
4329                 e1000_read_phy_reg(&adapter->hw, PHY_1000T_CTRL, &phy_ctrl);
4330                 phy_ctrl |= CR_1000T_MS_ENABLE;
4331                 e1000_write_phy_reg(&adapter->hw, PHY_1000T_CTRL, phy_ctrl);
4332                 if (!e1000_phy_setup_autoneg(&adapter->hw) &&
4333                    !e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &phy_ctrl)) {
4334                         phy_ctrl |= (MII_CR_AUTO_NEG_EN |
4335                                      MII_CR_RESTART_AUTO_NEG);
4336                         e1000_write_phy_reg(&adapter->hw, PHY_CTRL, phy_ctrl);
4337                 }
4338         }
4339         /* Restart process after E1000_SMARTSPEED_MAX iterations */
4340         if (adapter->smartspeed++ == E1000_SMARTSPEED_MAX)
4341                 adapter->smartspeed = 0;
4342 }
4343
4344 /**
4345  * e1000_ioctl -
4346  * @netdev:
4347  * @ifreq:
4348  * @cmd:
4349  **/
4350
4351 static int
4352 e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
4353 {
4354         switch (cmd) {
4355         case SIOCGMIIPHY:
4356         case SIOCGMIIREG:
4357         case SIOCSMIIREG:
4358                 return e1000_mii_ioctl(netdev, ifr, cmd);
4359         default:
4360                 return -EOPNOTSUPP;
4361         }
4362 }
4363
4364 /**
4365  * e1000_mii_ioctl -
4366  * @netdev:
4367  * @ifreq:
4368  * @cmd:
4369  **/
4370
4371 static int
4372 e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
4373 {
4374         struct e1000_adapter *adapter = netdev_priv(netdev);
4375         struct mii_ioctl_data *data = if_mii(ifr);
4376         int retval;
4377         uint16_t mii_reg;
4378         uint16_t spddplx;
4379         unsigned long flags;
4380
4381         if (adapter->hw.media_type != e1000_media_type_copper)
4382                 return -EOPNOTSUPP;
4383
4384         switch (cmd) {
4385         case SIOCGMIIPHY:
4386                 data->phy_id = adapter->hw.phy_addr;
4387                 break;
4388         case SIOCGMIIREG:
4389                 if (!capable(CAP_NET_ADMIN))
4390                         return -EPERM;
4391                 spin_lock_irqsave(&adapter->stats_lock, flags);
4392                 if (e1000_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
4393                                    &data->val_out)) {
4394                         spin_unlock_irqrestore(&adapter->stats_lock, flags);
4395                         return -EIO;
4396                 }
4397                 spin_unlock_irqrestore(&adapter->stats_lock, flags);
4398                 break;
4399         case SIOCSMIIREG:
4400                 if (!capable(CAP_NET_ADMIN))
4401                         return -EPERM;
4402                 if (data->reg_num & ~(0x1F))
4403                         return -EFAULT;
4404                 mii_reg = data->val_in;
4405                 spin_lock_irqsave(&adapter->stats_lock, flags);
4406                 if (e1000_write_phy_reg(&adapter->hw, data->reg_num,
4407                                         mii_reg)) {
4408                         spin_unlock_irqrestore(&adapter->stats_lock, flags);
4409                         return -EIO;
4410                 }
4411                 if (adapter->hw.media_type == e1000_media_type_copper) {
4412                         switch (data->reg_num) {
4413                         case PHY_CTRL:
4414                                 if (mii_reg & MII_CR_POWER_DOWN)
4415                                         break;
4416                                 if (mii_reg & MII_CR_AUTO_NEG_EN) {
4417                                         adapter->hw.autoneg = 1;
4418                                         adapter->hw.autoneg_advertised = 0x2F;
4419                                 } else {
4420                                         if (mii_reg & 0x40)
4421                                                 spddplx = SPEED_1000;
4422                                         else if (mii_reg & 0x2000)
4423                                                 spddplx = SPEED_100;
4424                                         else
4425                                                 spddplx = SPEED_10;
4426                                         spddplx += (mii_reg & 0x100)
4427                                                    ? DUPLEX_FULL :
4428                                                    DUPLEX_HALF;
4429                                         retval = e1000_set_spd_dplx(adapter,
4430                                                                     spddplx);
4431                                         if (retval) {
4432                                                 spin_unlock_irqrestore(
4433                                                         &adapter->stats_lock,
4434                                                         flags);
4435                                                 return retval;
4436                                         }
4437                                 }
4438                                 if (netif_running(adapter->netdev))
4439                                         e1000_reinit_locked(adapter);
4440                                 else
4441                                         e1000_reset(adapter);
4442                                 break;
4443                         case M88E1000_PHY_SPEC_CTRL:
4444                         case M88E1000_EXT_PHY_SPEC_CTRL:
4445                                 if (e1000_phy_reset(&adapter->hw)) {
4446                                         spin_unlock_irqrestore(
4447                                                 &adapter->stats_lock, flags);
4448                                         return -EIO;
4449                                 }
4450                                 break;
4451                         }
4452                 } else {
4453                         switch (data->reg_num) {
4454                         case PHY_CTRL:
4455                                 if (mii_reg & MII_CR_POWER_DOWN)
4456                                         break;
4457                                 if (netif_running(adapter->netdev))
4458                                         e1000_reinit_locked(adapter);
4459                                 else
4460                                         e1000_reset(adapter);
4461                                 break;
4462                         }
4463                 }
4464                 spin_unlock_irqrestore(&adapter->stats_lock, flags);
4465                 break;
4466         default:
4467                 return -EOPNOTSUPP;
4468         }
4469         return E1000_SUCCESS;
4470 }
4471
4472 void
4473 e1000_pci_set_mwi(struct e1000_hw *hw)
4474 {
4475         struct e1000_adapter *adapter = hw->back;
4476         int ret_val = pci_set_mwi(adapter->pdev);
4477
4478         if (ret_val)
4479                 DPRINTK(PROBE, ERR, "Error in setting MWI\n");
4480 }
4481
4482 void
4483 e1000_pci_clear_mwi(struct e1000_hw *hw)
4484 {
4485         struct e1000_adapter *adapter = hw->back;
4486
4487         pci_clear_mwi(adapter->pdev);
4488 }
4489
4490 void
4491 e1000_read_pci_cfg(struct e1000_hw *hw, uint32_t reg, uint16_t *value)
4492 {
4493         struct e1000_adapter *adapter = hw->back;
4494
4495         pci_read_config_word(adapter->pdev, reg, value);
4496 }
4497
4498 void
4499 e1000_write_pci_cfg(struct e1000_hw *hw, uint32_t reg, uint16_t *value)
4500 {
4501         struct e1000_adapter *adapter = hw->back;
4502
4503         pci_write_config_word(adapter->pdev, reg, *value);
4504 }
4505
4506 int32_t
4507 e1000_read_pcie_cap_reg(struct e1000_hw *hw, uint32_t reg, uint16_t *value)
4508 {
4509     struct e1000_adapter *adapter = hw->back;
4510     uint16_t cap_offset;
4511
4512     cap_offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP);
4513     if (!cap_offset)
4514         return -E1000_ERR_CONFIG;
4515
4516     pci_read_config_word(adapter->pdev, cap_offset + reg, value);
4517
4518     return E1000_SUCCESS;
4519 }
4520
4521 void
4522 e1000_io_write(struct e1000_hw *hw, unsigned long port, uint32_t value)
4523 {
4524         outl(value, port);
4525 }
4526
4527 static void
4528 e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp)
4529 {
4530         struct e1000_adapter *adapter = netdev_priv(netdev);
4531         uint32_t ctrl, rctl;
4532
4533         e1000_irq_disable(adapter);
4534         adapter->vlgrp = grp;
4535
4536         if (grp) {
4537                 /* enable VLAN tag insert/strip */
4538                 ctrl = E1000_READ_REG(&adapter->hw, CTRL);
4539                 ctrl |= E1000_CTRL_VME;
4540                 E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
4541
4542                 if (adapter->hw.mac_type != e1000_ich8lan) {
4543                         /* enable VLAN receive filtering */
4544                         rctl = E1000_READ_REG(&adapter->hw, RCTL);
4545                         rctl |= E1000_RCTL_VFE;
4546                         rctl &= ~E1000_RCTL_CFIEN;
4547                         E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
4548                         e1000_update_mng_vlan(adapter);
4549                 }
4550         } else {
4551                 /* disable VLAN tag insert/strip */
4552                 ctrl = E1000_READ_REG(&adapter->hw, CTRL);
4553                 ctrl &= ~E1000_CTRL_VME;
4554                 E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
4555
4556                 if (adapter->hw.mac_type != e1000_ich8lan) {
4557                         /* disable VLAN filtering */
4558                         rctl = E1000_READ_REG(&adapter->hw, RCTL);
4559                         rctl &= ~E1000_RCTL_VFE;
4560                         E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
4561                         if (adapter->mng_vlan_id !=
4562                             (uint16_t)E1000_MNG_VLAN_NONE) {
4563                                 e1000_vlan_rx_kill_vid(netdev,
4564                                                        adapter->mng_vlan_id);
4565                                 adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
4566                         }
4567                 }
4568         }
4569
4570         e1000_irq_enable(adapter);
4571 }
4572
4573 static void
4574 e1000_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid)
4575 {
4576         struct e1000_adapter *adapter = netdev_priv(netdev);
4577         uint32_t vfta, index;
4578
4579         if ((adapter->hw.mng_cookie.status &
4580              E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
4581             (vid == adapter->mng_vlan_id))
4582                 return;
4583         /* add VID to filter table */
4584         index = (vid >> 5) & 0x7F;
4585         vfta = E1000_READ_REG_ARRAY(&adapter->hw, VFTA, index);
4586         vfta |= (1 << (vid & 0x1F));
4587         e1000_write_vfta(&adapter->hw, index, vfta);
4588 }
4589
4590 static void
4591 e1000_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid)
4592 {
4593         struct e1000_adapter *adapter = netdev_priv(netdev);
4594         uint32_t vfta, index;
4595
4596         e1000_irq_disable(adapter);
4597
4598         if (adapter->vlgrp)
4599                 adapter->vlgrp->vlan_devices[vid] = NULL;
4600
4601         e1000_irq_enable(adapter);
4602
4603         if ((adapter->hw.mng_cookie.status &
4604              E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
4605             (vid == adapter->mng_vlan_id)) {
4606                 /* release control to f/w */
4607                 e1000_release_hw_control(adapter);
4608                 return;
4609         }
4610
4611         /* remove VID from filter table */
4612         index = (vid >> 5) & 0x7F;
4613         vfta = E1000_READ_REG_ARRAY(&adapter->hw, VFTA, index);
4614         vfta &= ~(1 << (vid & 0x1F));
4615         e1000_write_vfta(&adapter->hw, index, vfta);
4616 }
4617
4618 static void
4619 e1000_restore_vlan(struct e1000_adapter *adapter)
4620 {
4621         e1000_vlan_rx_register(adapter->netdev, adapter->vlgrp);
4622
4623         if (adapter->vlgrp) {
4624                 uint16_t vid;
4625                 for (vid = 0; vid < VLAN_GROUP_ARRAY_LEN; vid++) {
4626                         if (!adapter->vlgrp->vlan_devices[vid])
4627                                 continue;
4628                         e1000_vlan_rx_add_vid(adapter->netdev, vid);
4629                 }
4630         }
4631 }
4632
4633 int
4634 e1000_set_spd_dplx(struct e1000_adapter *adapter, uint16_t spddplx)
4635 {
4636         adapter->hw.autoneg = 0;
4637
4638         /* Fiber NICs only allow 1000 gbps Full duplex */
4639         if ((adapter->hw.media_type == e1000_media_type_fiber) &&
4640                 spddplx != (SPEED_1000 + DUPLEX_FULL)) {
4641                 DPRINTK(PROBE, ERR, "Unsupported Speed/Duplex configuration\n");
4642                 return -EINVAL;
4643         }
4644
4645         switch (spddplx) {
4646         case SPEED_10 + DUPLEX_HALF:
4647                 adapter->hw.forced_speed_duplex = e1000_10_half;
4648                 break;
4649         case SPEED_10 + DUPLEX_FULL:
4650                 adapter->hw.forced_speed_duplex = e1000_10_full;
4651                 break;
4652         case SPEED_100 + DUPLEX_HALF:
4653                 adapter->hw.forced_speed_duplex = e1000_100_half;
4654                 break;
4655         case SPEED_100 + DUPLEX_FULL:
4656                 adapter->hw.forced_speed_duplex = e1000_100_full;
4657                 break;
4658         case SPEED_1000 + DUPLEX_FULL:
4659                 adapter->hw.autoneg = 1;
4660                 adapter->hw.autoneg_advertised = ADVERTISE_1000_FULL;
4661                 break;
4662         case SPEED_1000 + DUPLEX_HALF: /* not supported */
4663         default:
4664                 DPRINTK(PROBE, ERR, "Unsupported Speed/Duplex configuration\n");
4665                 return -EINVAL;
4666         }
4667         return 0;
4668 }
4669
4670 #ifdef CONFIG_PM
4671 /* Save/restore 16 or 64 dwords of PCI config space depending on which
4672  * bus we're on (PCI(X) vs. PCI-E)
4673  */
4674 #define PCIE_CONFIG_SPACE_LEN 256
4675 #define PCI_CONFIG_SPACE_LEN 64
4676 static int
4677 e1000_pci_save_state(struct e1000_adapter *adapter)
4678 {
4679         struct pci_dev *dev = adapter->pdev;
4680         int size;
4681         int i;
4682
4683         if (adapter->hw.mac_type >= e1000_82571)
4684                 size = PCIE_CONFIG_SPACE_LEN;
4685         else
4686                 size = PCI_CONFIG_SPACE_LEN;
4687
4688         WARN_ON(adapter->config_space != NULL);
4689
4690         adapter->config_space = kmalloc(size, GFP_KERNEL);
4691         if (!adapter->config_space) {
4692                 DPRINTK(PROBE, ERR, "unable to allocate %d bytes\n", size);
4693                 return -ENOMEM;
4694         }
4695         for (i = 0; i < (size / 4); i++)
4696                 pci_read_config_dword(dev, i * 4, &adapter->config_space[i]);
4697         return 0;
4698 }
4699
4700 static void
4701 e1000_pci_restore_state(struct e1000_adapter *adapter)
4702 {
4703         struct pci_dev *dev = adapter->pdev;
4704         int size;
4705         int i;
4706
4707         if (adapter->config_space == NULL)
4708                 return;
4709
4710         if (adapter->hw.mac_type >= e1000_82571)
4711                 size = PCIE_CONFIG_SPACE_LEN;
4712         else
4713                 size = PCI_CONFIG_SPACE_LEN;
4714         for (i = 0; i < (size / 4); i++)
4715                 pci_write_config_dword(dev, i * 4, adapter->config_space[i]);
4716         kfree(adapter->config_space);
4717         adapter->config_space = NULL;
4718         return;
4719 }
4720 #endif /* CONFIG_PM */
4721
4722 static int
4723 e1000_suspend(struct pci_dev *pdev, pm_message_t state)
4724 {
4725         struct net_device *netdev = pci_get_drvdata(pdev);
4726         struct e1000_adapter *adapter = netdev_priv(netdev);
4727         uint32_t ctrl, ctrl_ext, rctl, manc, status;
4728         uint32_t wufc = adapter->wol;
4729 #ifdef CONFIG_PM
4730         int retval = 0;
4731 #endif
4732
4733         netif_device_detach(netdev);
4734
4735         if (netif_running(netdev)) {
4736                 WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
4737                 e1000_down(adapter);
4738         }
4739
4740 #ifdef CONFIG_PM
4741         /* Implement our own version of pci_save_state(pdev) because pci-
4742          * express adapters have 256-byte config spaces. */
4743         retval = e1000_pci_save_state(adapter);
4744         if (retval)
4745                 return retval;
4746 #endif
4747
4748         status = E1000_READ_REG(&adapter->hw, STATUS);
4749         if (status & E1000_STATUS_LU)
4750                 wufc &= ~E1000_WUFC_LNKC;
4751
4752         if (wufc) {
4753                 e1000_setup_rctl(adapter);
4754                 e1000_set_multi(netdev);
4755
4756                 /* turn on all-multi mode if wake on multicast is enabled */
4757                 if (wufc & E1000_WUFC_MC) {
4758                         rctl = E1000_READ_REG(&adapter->hw, RCTL);
4759                         rctl |= E1000_RCTL_MPE;
4760                         E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
4761                 }
4762
4763                 if (adapter->hw.mac_type >= e1000_82540) {
4764                         ctrl = E1000_READ_REG(&adapter->hw, CTRL);
4765                         /* advertise wake from D3Cold */
4766                         #define E1000_CTRL_ADVD3WUC 0x00100000
4767                         /* phy power management enable */
4768                         #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
4769                         ctrl |= E1000_CTRL_ADVD3WUC |
4770                                 E1000_CTRL_EN_PHY_PWR_MGMT;
4771                         E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
4772                 }
4773
4774                 if (adapter->hw.media_type == e1000_media_type_fiber ||
4775                    adapter->hw.media_type == e1000_media_type_internal_serdes) {
4776                         /* keep the laser running in D3 */
4777                         ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
4778                         ctrl_ext |= E1000_CTRL_EXT_SDP7_DATA;
4779                         E1000_WRITE_REG(&adapter->hw, CTRL_EXT, ctrl_ext);
4780                 }
4781
4782                 /* Allow time for pending master requests to run */
4783                 e1000_disable_pciex_master(&adapter->hw);
4784
4785                 E1000_WRITE_REG(&adapter->hw, WUC, E1000_WUC_PME_EN);
4786                 E1000_WRITE_REG(&adapter->hw, WUFC, wufc);
4787                 pci_enable_wake(pdev, PCI_D3hot, 1);
4788                 pci_enable_wake(pdev, PCI_D3cold, 1);
4789         } else {
4790                 E1000_WRITE_REG(&adapter->hw, WUC, 0);
4791                 E1000_WRITE_REG(&adapter->hw, WUFC, 0);
4792                 pci_enable_wake(pdev, PCI_D3hot, 0);
4793                 pci_enable_wake(pdev, PCI_D3cold, 0);
4794         }
4795
4796         if (adapter->hw.mac_type >= e1000_82540 &&
4797             adapter->hw.mac_type < e1000_82571 &&
4798             adapter->hw.media_type == e1000_media_type_copper) {
4799                 manc = E1000_READ_REG(&adapter->hw, MANC);
4800                 if (manc & E1000_MANC_SMBUS_EN) {
4801                         manc |= E1000_MANC_ARP_EN;
4802                         E1000_WRITE_REG(&adapter->hw, MANC, manc);
4803                         pci_enable_wake(pdev, PCI_D3hot, 1);
4804                         pci_enable_wake(pdev, PCI_D3cold, 1);
4805                 }
4806         }
4807
4808         if (adapter->hw.phy_type == e1000_phy_igp_3)
4809                 e1000_phy_powerdown_workaround(&adapter->hw);
4810
4811         if (netif_running(netdev))
4812                 e1000_free_irq(adapter);
4813
4814         /* Release control of h/w to f/w.  If f/w is AMT enabled, this
4815          * would have already happened in close and is redundant. */
4816         e1000_release_hw_control(adapter);
4817
4818         pci_disable_device(pdev);
4819
4820         pci_set_power_state(pdev, pci_choose_state(pdev, state));
4821
4822         return 0;
4823 }
4824
4825 #ifdef CONFIG_PM
4826 static int
4827 e1000_resume(struct pci_dev *pdev)
4828 {
4829         struct net_device *netdev = pci_get_drvdata(pdev);
4830         struct e1000_adapter *adapter = netdev_priv(netdev);
4831         uint32_t manc, err;
4832
4833         pci_set_power_state(pdev, PCI_D0);
4834         e1000_pci_restore_state(adapter);
4835         if ((err = pci_enable_device(pdev))) {
4836                 printk(KERN_ERR "e1000: Cannot enable PCI device from suspend\n");
4837                 return err;
4838         }
4839         pci_set_master(pdev);
4840
4841         pci_enable_wake(pdev, PCI_D3hot, 0);
4842         pci_enable_wake(pdev, PCI_D3cold, 0);
4843
4844         if (netif_running(netdev) && (err = e1000_request_irq(adapter)))
4845                 return err;
4846
4847         e1000_power_up_phy(adapter);
4848         e1000_reset(adapter);
4849         E1000_WRITE_REG(&adapter->hw, WUS, ~0);
4850
4851         if (netif_running(netdev))
4852                 e1000_up(adapter);
4853
4854         netif_device_attach(netdev);
4855
4856         if (adapter->hw.mac_type >= e1000_82540 &&
4857             adapter->hw.mac_type < e1000_82571 &&
4858             adapter->hw.media_type == e1000_media_type_copper) {
4859                 manc = E1000_READ_REG(&adapter->hw, MANC);
4860                 manc &= ~(E1000_MANC_ARP_EN);
4861                 E1000_WRITE_REG(&adapter->hw, MANC, manc);
4862         }
4863
4864         /* If the controller is 82573 and f/w is AMT, do not set
4865          * DRV_LOAD until the interface is up.  For all other cases,
4866          * let the f/w know that the h/w is now under the control
4867          * of the driver. */
4868         if (adapter->hw.mac_type != e1000_82573 ||
4869             !e1000_check_mng_mode(&adapter->hw))
4870                 e1000_get_hw_control(adapter);
4871
4872         return 0;
4873 }
4874 #endif
4875
4876 static void e1000_shutdown(struct pci_dev *pdev)
4877 {
4878         e1000_suspend(pdev, PMSG_SUSPEND);
4879 }
4880
4881 #ifdef CONFIG_NET_POLL_CONTROLLER
4882 /*
4883  * Polling 'interrupt' - used by things like netconsole to send skbs
4884  * without having to re-enable interrupts. It's not called while
4885  * the interrupt routine is executing.
4886  */
4887 static void
4888 e1000_netpoll(struct net_device *netdev)
4889 {
4890         struct e1000_adapter *adapter = netdev_priv(netdev);
4891
4892         disable_irq(adapter->pdev->irq);
4893         e1000_intr(adapter->pdev->irq, netdev);
4894         e1000_clean_tx_irq(adapter, adapter->tx_ring);
4895 #ifndef CONFIG_E1000_NAPI
4896         adapter->clean_rx(adapter, adapter->rx_ring);
4897 #endif
4898         enable_irq(adapter->pdev->irq);
4899 }
4900 #endif
4901
4902 /**
4903  * e1000_io_error_detected - called when PCI error is detected
4904  * @pdev: Pointer to PCI device
4905  * @state: The current pci conneection state
4906  *
4907  * This function is called after a PCI bus error affecting
4908  * this device has been detected.
4909  */
4910 static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
4911 {
4912         struct net_device *netdev = pci_get_drvdata(pdev);
4913         struct e1000_adapter *adapter = netdev->priv;
4914
4915         netif_device_detach(netdev);
4916
4917         if (netif_running(netdev))
4918                 e1000_down(adapter);
4919         pci_disable_device(pdev);
4920
4921         /* Request a slot slot reset. */
4922         return PCI_ERS_RESULT_NEED_RESET;
4923 }
4924
4925 /**
4926  * e1000_io_slot_reset - called after the pci bus has been reset.
4927  * @pdev: Pointer to PCI device
4928  *
4929  * Restart the card from scratch, as if from a cold-boot. Implementation
4930  * resembles the first-half of the e1000_resume routine.
4931  */
4932 static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
4933 {
4934         struct net_device *netdev = pci_get_drvdata(pdev);
4935         struct e1000_adapter *adapter = netdev->priv;
4936
4937         if (pci_enable_device(pdev)) {
4938                 printk(KERN_ERR "e1000: Cannot re-enable PCI device after reset.\n");
4939                 return PCI_ERS_RESULT_DISCONNECT;
4940         }
4941         pci_set_master(pdev);
4942
4943         pci_enable_wake(pdev, PCI_D3hot, 0);
4944         pci_enable_wake(pdev, PCI_D3cold, 0);
4945
4946         e1000_reset(adapter);
4947         E1000_WRITE_REG(&adapter->hw, WUS, ~0);
4948
4949         return PCI_ERS_RESULT_RECOVERED;
4950 }
4951
4952 /**
4953  * e1000_io_resume - called when traffic can start flowing again.
4954  * @pdev: Pointer to PCI device
4955  *
4956  * This callback is called when the error recovery driver tells us that
4957  * its OK to resume normal operation. Implementation resembles the
4958  * second-half of the e1000_resume routine.
4959  */
4960 static void e1000_io_resume(struct pci_dev *pdev)
4961 {
4962         struct net_device *netdev = pci_get_drvdata(pdev);
4963         struct e1000_adapter *adapter = netdev->priv;
4964         uint32_t manc, swsm;
4965
4966         if (netif_running(netdev)) {
4967                 if (e1000_up(adapter)) {
4968                         printk("e1000: can't bring device back up after reset\n");
4969                         return;
4970                 }
4971         }
4972
4973         netif_device_attach(netdev);
4974
4975         if (adapter->hw.mac_type >= e1000_82540 &&
4976             adapter->hw.mac_type < e1000_82571 &&
4977             adapter->hw.media_type == e1000_media_type_copper) {
4978                 manc = E1000_READ_REG(&adapter->hw, MANC);
4979                 manc &= ~(E1000_MANC_ARP_EN);
4980                 E1000_WRITE_REG(&adapter->hw, MANC, manc);
4981         }
4982
4983         switch (adapter->hw.mac_type) {
4984         case e1000_82573:
4985                 swsm = E1000_READ_REG(&adapter->hw, SWSM);
4986                 E1000_WRITE_REG(&adapter->hw, SWSM,
4987                                 swsm | E1000_SWSM_DRV_LOAD);
4988                 break;
4989         default:
4990                 break;
4991         }
4992
4993         if (netif_running(netdev))
4994                 mod_timer(&adapter->watchdog_timer, jiffies);
4995 }
4996
4997 /* e1000_main.c */