drivers/net/bnx2x/bnx2x_cmn.c

   1 /* bnx2x_cmn.c: Broadcom Everest network driver.
   2  *
   3  * Copyright (c) 2007-2011 Broadcom Corporation
   4  *
   5  * This program is free software; you can redistribute it and/or modify
   6  * it under the terms of the GNU General Public License as published by
   7  * the Free Software Foundation.
   8  *
   9  * Maintained by: Eilon Greenstein <eilong@broadcom.com>
  10  * Written by: Eliezer Tamir
  11  * Based on code from Michael Chan's bnx2 driver
  12  * UDP CSUM errata workaround by Arik Gendelman
  13  * Slowpath and fastpath rework by Vladislav Zolotarov
  14  * Statistics and Link management by Yitchak Gertner
  15  *
  16  */
  17
  18 #include <linux/etherdevice.h>
  19 #include <linux/if_vlan.h>
  20 #include <linux/interrupt.h>
  21 #include <linux/ip.h>
  22 #include <net/ipv6.h>
  23 #include <net/ip6_checksum.h>
  24 #include <linux/firmware.h>
  25 #include <linux/prefetch.h>
  26 #include "bnx2x_cmn.h"
  27 #include "bnx2x_init.h"
  28 #include "bnx2x_sp.h"
  29
  30
  31
  32 /**
  33  * bnx2x_bz_fp - zero content of the fastpath structure.
  34  *
  35  * @bp:         driver handle
  36  * @index:      fastpath index to be zeroed
  37  *
  38  * Makes sure the contents of the bp->fp[index].napi is kept
  39  * intact.
  40  */
  41 static inline void bnx2x_bz_fp(struct bnx2x *bp, int index)
  42 {
  43         struct bnx2x_fastpath *fp = &bp->fp[index];
  44         struct napi_struct orig_napi = fp->napi;
  45         /* bzero bnx2x_fastpath contents */
  46         memset(fp, 0, sizeof(*fp));
  47
  48         /* Restore the NAPI object as it has been already initialized */
  49         fp->napi = orig_napi;
  50
  51         fp->bp = bp;
  52         fp->index = index;
  53         if (IS_ETH_FP(fp))
  54                 fp->max_cos = bp->max_cos;
  55         else
  56                 /* Special queues support only one CoS */
  57                 fp->max_cos = 1;
  58
  59         /*
  60          * set the tpa flag for each queue. The tpa flag determines the queue
  61          * minimal size so it must be set prior to queue memory allocation
  62          */
  63         fp->disable_tpa = ((bp->flags & TPA_ENABLE_FLAG) == 0);
  64
  65 #ifdef BCM_CNIC
  66         /* We don't want TPA on FCoE, FWD and OOO L2 rings */
  67         bnx2x_fcoe(bp, disable_tpa) = 1;
  68 #endif
  69 }
  70
  71 /**
  72  * bnx2x_move_fp - move content of the fastpath structure.
  73  *
  74  * @bp:         driver handle
  75  * @from:       source FP index
  76  * @to:         destination FP index
  77  *
  78  * Makes sure the contents of the bp->fp[to].napi is kept
  79  * intact.
  80  */
  81 static inline void bnx2x_move_fp(struct bnx2x *bp, int from, int to)
  82 {
  83         struct bnx2x_fastpath *from_fp = &bp->fp[from];
  84         struct bnx2x_fastpath *to_fp = &bp->fp[to];
  85         struct napi_struct orig_napi = to_fp->napi;
  86         /* Move bnx2x_fastpath contents */
  87         memcpy(to_fp, from_fp, sizeof(*to_fp));
  88         to_fp->index = to;
  89
  90         /* Restore the NAPI object as it has been already initialized */
  91         to_fp->napi = orig_napi;
  92 }
  93
  94 int load_count[2][3] = { {0} }; /* per-path: 0-common, 1-port0, 2-port1 */
  95
  96 /* free skb in the packet ring at pos idx
  97  * return idx of last bd freed
  98  */
  99 static u16 bnx2x_free_tx_pkt(struct bnx2x *bp, struct bnx2x_fp_txdata *txdata,
 100                              u16 idx)
 101 {
 102         struct sw_tx_bd *tx_buf = &txdata->tx_buf_ring[idx];
 103         struct eth_tx_start_bd *tx_start_bd;
 104         struct eth_tx_bd *tx_data_bd;
 105         struct sk_buff *skb = tx_buf->skb;
 106         u16 bd_idx = TX_BD(tx_buf->first_bd), new_cons;
 107         int nbd;
 108
 109         /* prefetch skb end pointer to speedup dev_kfree_skb() */
 110         prefetch(&skb->end);
 111
 112         DP(BNX2X_MSG_FP, "fp[%d]: pkt_idx %d  buff @(%p)->skb %p\n",
 113            txdata->txq_index, idx, tx_buf, skb);
 114
 115         /* unmap first bd */
 116         DP(BNX2X_MSG_OFF, "free bd_idx %d\n", bd_idx);
 117         tx_start_bd = &txdata->tx_desc_ring[bd_idx].start_bd;
 118         dma_unmap_single(&bp->pdev->dev, BD_UNMAP_ADDR(tx_start_bd),
 119                          BD_UNMAP_LEN(tx_start_bd), DMA_TO_DEVICE);
 120
 121
 122         nbd = le16_to_cpu(tx_start_bd->nbd) - 1;
 123 #ifdef BNX2X_STOP_ON_ERROR
 124         if ((nbd - 1) > (MAX_SKB_FRAGS + 2)) {
 125                 BNX2X_ERR("BAD nbd!\n");
 126                 bnx2x_panic();
 127         }
 128 #endif
 129         new_cons = nbd + tx_buf->first_bd;
 130
 131         /* Get the next bd */
 132         bd_idx = TX_BD(NEXT_TX_IDX(bd_idx));
 133
 134         /* Skip a parse bd... */
 135         --nbd;
 136         bd_idx = TX_BD(NEXT_TX_IDX(bd_idx));
 137
 138         /* ...and the TSO split header bd since they have no mapping */
 139         if (tx_buf->flags & BNX2X_TSO_SPLIT_BD) {
 140                 --nbd;
 141                 bd_idx = TX_BD(NEXT_TX_IDX(bd_idx));
 142         }
 143
 144         /* now free frags */
 145         while (nbd > 0) {
 146
 147                 DP(BNX2X_MSG_OFF, "free frag bd_idx %d\n", bd_idx);
 148                 tx_data_bd = &txdata->tx_desc_ring[bd_idx].reg_bd;
 149                 dma_unmap_page(&bp->pdev->dev, BD_UNMAP_ADDR(tx_data_bd),
 150                                BD_UNMAP_LEN(tx_data_bd), DMA_TO_DEVICE);
 151                 if (--nbd)
 152                         bd_idx = TX_BD(NEXT_TX_IDX(bd_idx));
 153         }
 154
 155         /* release skb */
 156         WARN_ON(!skb);
 157         dev_kfree_skb_any(skb);
 158         tx_buf->first_bd = 0;
 159         tx_buf->skb = NULL;
 160
 161         return new_cons;
 162 }
 163
 164 int bnx2x_tx_int(struct bnx2x *bp, struct bnx2x_fp_txdata *txdata)
 165 {
 166         struct netdev_queue *txq;
 167         u16 hw_cons, sw_cons, bd_cons = txdata->tx_bd_cons;
 168
 169 #ifdef BNX2X_STOP_ON_ERROR
 170         if (unlikely(bp->panic))
 171                 return -1;
 172 #endif
 173
 174         txq = netdev_get_tx_queue(bp->dev, txdata->txq_index);
 175         hw_cons = le16_to_cpu(*txdata->tx_cons_sb);
 176         sw_cons = txdata->tx_pkt_cons;
 177
 178         while (sw_cons != hw_cons) {
 179                 u16 pkt_cons;
 180
 181                 pkt_cons = TX_BD(sw_cons);
 182
 183                 DP(NETIF_MSG_TX_DONE, "queue[%d]: hw_cons %u  sw_cons %u "
 184                                       " pkt_cons %u\n",
 185                    txdata->txq_index, hw_cons, sw_cons, pkt_cons);
 186
 187                 bd_cons = bnx2x_free_tx_pkt(bp, txdata, pkt_cons);
 188                 sw_cons++;
 189         }
 190
 191         txdata->tx_pkt_cons = sw_cons;
 192         txdata->tx_bd_cons = bd_cons;
 193
 194         /* Need to make the tx_bd_cons update visible to start_xmit()
 195          * before checking for netif_tx_queue_stopped().  Without the
 196          * memory barrier, there is a small possibility that
 197          * start_xmit() will miss it and cause the queue to be stopped
 198          * forever.
 199          * On the other hand we need an rmb() here to ensure the proper
 200          * ordering of bit testing in the following
 201          * netif_tx_queue_stopped(txq) call.
 202          */
 203         smp_mb();
 204
 205         if (unlikely(netif_tx_queue_stopped(txq))) {
 206                 /* Taking tx_lock() is needed to prevent reenabling the queue
 207                  * while it's empty. This could have happen if rx_action() gets
 208                  * suspended in bnx2x_tx_int() after the condition before
 209                  * netif_tx_wake_queue(), while tx_action (bnx2x_start_xmit()):
 210                  *
 211                  * stops the queue->sees fresh tx_bd_cons->releases the queue->
 212                  * sends some packets consuming the whole queue again->
 213                  * stops the queue
 214                  */
 215
 216                 __netif_tx_lock(txq, smp_processor_id());
 217
 218                 if ((netif_tx_queue_stopped(txq)) &&
 219                     (bp->state == BNX2X_STATE_OPEN) &&
 220                     (bnx2x_tx_avail(bp, txdata) >= MAX_SKB_FRAGS + 3))
 221                         netif_tx_wake_queue(txq);
 222
 223                 __netif_tx_unlock(txq);
 224         }
 225         return 0;
 226 }
 227
 228 static inline void bnx2x_update_last_max_sge(struct bnx2x_fastpath *fp,
 229                                              u16 idx)
 230 {
 231         u16 last_max = fp->last_max_sge;
 232
 233         if (SUB_S16(idx, last_max) > 0)
 234                 fp->last_max_sge = idx;
 235 }
 236
 237 static void bnx2x_update_sge_prod(struct bnx2x_fastpath *fp,
 238                                   struct eth_fast_path_rx_cqe *fp_cqe)
 239 {
 240         struct bnx2x *bp = fp->bp;
 241         u16 sge_len = SGE_PAGE_ALIGN(le16_to_cpu(fp_cqe->pkt_len) -
 242                                      le16_to_cpu(fp_cqe->len_on_bd)) >>
 243                       SGE_PAGE_SHIFT;
 244         u16 last_max, last_elem, first_elem;
 245         u16 delta = 0;
 246         u16 i;
 247
 248         if (!sge_len)
 249                 return;
 250
 251         /* First mark all used pages */
 252         for (i = 0; i < sge_len; i++)
 253                 BIT_VEC64_CLEAR_BIT(fp->sge_mask,
 254                         RX_SGE(le16_to_cpu(fp_cqe->sgl_or_raw_data.sgl[i])));
 255
 256         DP(NETIF_MSG_RX_STATUS, "fp_cqe->sgl[%d] = %d\n",
 257            sge_len - 1, le16_to_cpu(fp_cqe->sgl_or_raw_data.sgl[sge_len - 1]));
 258
 259         /* Here we assume that the last SGE index is the biggest */
 260         prefetch((void *)(fp->sge_mask));
 261         bnx2x_update_last_max_sge(fp,
 262                 le16_to_cpu(fp_cqe->sgl_or_raw_data.sgl[sge_len - 1]));
 263
 264         last_max = RX_SGE(fp->last_max_sge);
 265         last_elem = last_max >> BIT_VEC64_ELEM_SHIFT;
 266         first_elem = RX_SGE(fp->rx_sge_prod) >> BIT_VEC64_ELEM_SHIFT;
 267
 268         /* If ring is not full */
 269         if (last_elem + 1 != first_elem)
 270                 last_elem++;
 271
 272         /* Now update the prod */
 273         for (i = first_elem; i != last_elem; i = NEXT_SGE_MASK_ELEM(i)) {
 274                 if (likely(fp->sge_mask[i]))
 275                         break;
 276
 277                 fp->sge_mask[i] = BIT_VEC64_ELEM_ONE_MASK;
 278                 delta += BIT_VEC64_ELEM_SZ;
 279         }
 280
 281         if (delta > 0) {
 282                 fp->rx_sge_prod += delta;
 283                 /* clear page-end entries */
 284                 bnx2x_clear_sge_mask_next_elems(fp);
 285         }
 286
 287         DP(NETIF_MSG_RX_STATUS,
 288            "fp->last_max_sge = %d  fp->rx_sge_prod = %d\n",
 289            fp->last_max_sge, fp->rx_sge_prod);
 290 }
 291
 292 static void bnx2x_tpa_start(struct bnx2x_fastpath *fp, u16 queue,
 293                             struct sk_buff *skb, u16 cons, u16 prod,
 294                             struct eth_fast_path_rx_cqe *cqe)
 295 {
 296         struct bnx2x *bp = fp->bp;
 297         struct sw_rx_bd *cons_rx_buf = &fp->rx_buf_ring[cons];
 298         struct sw_rx_bd *prod_rx_buf = &fp->rx_buf_ring[prod];
 299         struct eth_rx_bd *prod_bd = &fp->rx_desc_ring[prod];
 300         dma_addr_t mapping;
 301         struct bnx2x_agg_info *tpa_info = &fp->tpa_info[queue];
 302         struct sw_rx_bd *first_buf = &tpa_info->first_buf;
 303
 304         /* print error if current state != stop */
 305         if (tpa_info->tpa_state != BNX2X_TPA_STOP)
 306                 BNX2X_ERR("start of bin not in stop [%d]\n", queue);
 307
 308         /* Try to map an empty skb from the aggregation info  */
 309         mapping = dma_map_single(&bp->pdev->dev,
 310                                  first_buf->skb->data,
 311                                  fp->rx_buf_size, DMA_FROM_DEVICE);
 312         /*
 313          *  ...if it fails - move the skb from the consumer to the producer
 314          *  and set the current aggregation state as ERROR to drop it
 315          *  when TPA_STOP arrives.
 316          */
 317
 318         if (unlikely(dma_mapping_error(&bp->pdev->dev, mapping))) {
 319                 /* Move the BD from the consumer to the producer */
 320                 bnx2x_reuse_rx_skb(fp, cons, prod);
 321                 tpa_info->tpa_state = BNX2X_TPA_ERROR;
 322                 return;
 323         }
 324
 325         /* move empty skb from pool to prod */
 326         prod_rx_buf->skb = first_buf->skb;
 327         dma_unmap_addr_set(prod_rx_buf, mapping, mapping);
 328         /* point prod_bd to new skb */
 329         prod_bd->addr_hi = cpu_to_le32(U64_HI(mapping));
 330         prod_bd->addr_lo = cpu_to_le32(U64_LO(mapping));
 331
 332         /* move partial skb from cons to pool (don't unmap yet) */
 333         *first_buf = *cons_rx_buf;
 334
 335         /* mark bin state as START */
 336         tpa_info->parsing_flags =
 337                 le16_to_cpu(cqe->pars_flags.flags);
 338         tpa_info->vlan_tag = le16_to_cpu(cqe->vlan_tag);
 339         tpa_info->tpa_state = BNX2X_TPA_START;
 340         tpa_info->len_on_bd = le16_to_cpu(cqe->len_on_bd);
 341         tpa_info->placement_offset = cqe->placement_offset;
 342
 343 #ifdef BNX2X_STOP_ON_ERROR
 344         fp->tpa_queue_used |= (1 << queue);
 345 #ifdef _ASM_GENERIC_INT_L64_H
 346         DP(NETIF_MSG_RX_STATUS, "fp->tpa_queue_used = 0x%lx\n",
 347 #else
 348         DP(NETIF_MSG_RX_STATUS, "fp->tpa_queue_used = 0x%llx\n",
 349 #endif
 350            fp->tpa_queue_used);
 351 #endif
 352 }
 353
 354 /* Timestamp option length allowed for TPA aggregation:
 355  *
 356  *              nop nop kind length echo val
 357  */
 358 #define TPA_TSTAMP_OPT_LEN      12
 359 /**
 360  * bnx2x_set_lro_mss - calculate the approximate value of the MSS
 361  *
 362  * @bp:                 driver handle
 363  * @parsing_flags:      parsing flags from the START CQE
 364  * @len_on_bd:          total length of the first packet for the
 365  *                      aggregation.
 366  *
 367  * Approximate value of the MSS for this aggregation calculated using
 368  * the first packet of it.
 369  */
 370 static inline u16 bnx2x_set_lro_mss(struct bnx2x *bp, u16 parsing_flags,
 371                                     u16 len_on_bd)
 372 {
 373         /*
 374          * TPA arrgregation won't have either IP options or TCP options
 375          * other than timestamp or IPv6 extension headers.
 376          */
 377         u16 hdrs_len = ETH_HLEN + sizeof(struct tcphdr);
 378
 379         if (GET_FLAG(parsing_flags, PARSING_FLAGS_OVER_ETHERNET_PROTOCOL) ==
 380             PRS_FLAG_OVERETH_IPV6)
 381                 hdrs_len += sizeof(struct ipv6hdr);
 382         else /* IPv4 */
 383                 hdrs_len += sizeof(struct iphdr);
 384
 385
 386         /* Check if there was a TCP timestamp, if there is it's will
 387          * always be 12 bytes length: nop nop kind length echo val.
 388          *
 389          * Otherwise FW would close the aggregation.
 390          */
 391         if (parsing_flags & PARSING_FLAGS_TIME_STAMP_EXIST_FLAG)
 392                 hdrs_len += TPA_TSTAMP_OPT_LEN;
 393
 394         return len_on_bd - hdrs_len;
 395 }
 396
 397 static int bnx2x_fill_frag_skb(struct bnx2x *bp, struct bnx2x_fastpath *fp,
 398                                u16 queue, struct sk_buff *skb,
 399                                struct eth_end_agg_rx_cqe *cqe,
 400                                u16 cqe_idx)
 401 {
 402         struct sw_rx_page *rx_pg, old_rx_pg;
 403         u32 i, frag_len, frag_size, pages;
 404         int err;
 405         int j;
 406         struct bnx2x_agg_info *tpa_info = &fp->tpa_info[queue];
 407         u16 len_on_bd = tpa_info->len_on_bd;
 408
 409         frag_size = le16_to_cpu(cqe->pkt_len) - len_on_bd;
 410         pages = SGE_PAGE_ALIGN(frag_size) >> SGE_PAGE_SHIFT;
 411
 412         /* This is needed in order to enable forwarding support */
 413         if (frag_size)
 414                 skb_shinfo(skb)->gso_size = bnx2x_set_lro_mss(bp,
 415                                         tpa_info->parsing_flags, len_on_bd);
 416
 417 #ifdef BNX2X_STOP_ON_ERROR
 418         if (pages > min_t(u32, 8, MAX_SKB_FRAGS)*SGE_PAGE_SIZE*PAGES_PER_SGE) {
 419                 BNX2X_ERR("SGL length is too long: %d. CQE index is %d\n",
 420                           pages, cqe_idx);
 421                 BNX2X_ERR("cqe->pkt_len = %d\n", cqe->pkt_len);
 422                 bnx2x_panic();
 423                 return -EINVAL;
 424         }
 425 #endif
 426
 427         /* Run through the SGL and compose the fragmented skb */
 428         for (i = 0, j = 0; i < pages; i += PAGES_PER_SGE, j++) {
 429                 u16 sge_idx = RX_SGE(le16_to_cpu(cqe->sgl_or_raw_data.sgl[j]));
 430
 431                 /* FW gives the indices of the SGE as if the ring is an array
 432                    (meaning that "next" element will consume 2 indices) */
 433                 frag_len = min(frag_size, (u32)(SGE_PAGE_SIZE*PAGES_PER_SGE));
 434                 rx_pg = &fp->rx_page_ring[sge_idx];
 435                 old_rx_pg = *rx_pg;
 436
 437                 /* If we fail to allocate a substitute page, we simply stop
 438                    where we are and drop the whole packet */
 439                 err = bnx2x_alloc_rx_sge(bp, fp, sge_idx);
 440                 if (unlikely(err)) {
 441                         fp->eth_q_stats.rx_skb_alloc_failed++;
 442                         return err;
 443                 }
 444
 445                 /* Unmap the page as we r going to pass it to the stack */
 446                 dma_unmap_page(&bp->pdev->dev,
 447                                dma_unmap_addr(&old_rx_pg, mapping),
 448                                SGE_PAGE_SIZE*PAGES_PER_SGE, DMA_FROM_DEVICE);
 449
 450                 /* Add one frag and update the appropriate fields in the skb */
 451                 skb_fill_page_desc(skb, j, old_rx_pg.page, 0, frag_len);
 452
 453                 skb->data_len += frag_len;
 454                 skb->truesize += frag_len;
 455                 skb->len += frag_len;
 456
 457                 frag_size -= frag_len;
 458         }
 459
 460         return 0;
 461 }
 462
 463 static void bnx2x_tpa_stop(struct bnx2x *bp, struct bnx2x_fastpath *fp,
 464                            u16 queue, struct eth_end_agg_rx_cqe *cqe,
 465                            u16 cqe_idx)
 466 {
 467         struct bnx2x_agg_info *tpa_info = &fp->tpa_info[queue];
 468         struct sw_rx_bd *rx_buf = &tpa_info->first_buf;
 469         u8 pad = tpa_info->placement_offset;
 470         u16 len = tpa_info->len_on_bd;
 471         struct sk_buff *skb = rx_buf->skb;
 472         /* alloc new skb */
 473         struct sk_buff *new_skb;
 474         u8 old_tpa_state = tpa_info->tpa_state;
 475
 476         tpa_info->tpa_state = BNX2X_TPA_STOP;
 477
 478         /* If we there was an error during the handling of the TPA_START -
 479          * drop this aggregation.
 480          */
 481         if (old_tpa_state == BNX2X_TPA_ERROR)
 482                 goto drop;
 483
 484         /* Try to allocate the new skb */
 485         new_skb = netdev_alloc_skb(bp->dev, fp->rx_buf_size);
 486
 487         /* Unmap skb in the pool anyway, as we are going to change
 488            pool entry status to BNX2X_TPA_STOP even if new skb allocation
 489            fails. */
 490         dma_unmap_single(&bp->pdev->dev, dma_unmap_addr(rx_buf, mapping),
 491                          fp->rx_buf_size, DMA_FROM_DEVICE);
 492
 493         if (likely(new_skb)) {
 494                 prefetch(skb);
 495                 prefetch(((char *)(skb)) + L1_CACHE_BYTES);
 496
 497 #ifdef BNX2X_STOP_ON_ERROR
 498                 if (pad + len > fp->rx_buf_size) {
 499                         BNX2X_ERR("skb_put is about to fail...  "
 500                                   "pad %d  len %d  rx_buf_size %d\n",
 501                                   pad, len, fp->rx_buf_size);
 502                         bnx2x_panic();
 503                         return;
 504                 }
 505 #endif
 506
 507                 skb_reserve(skb, pad);
 508                 skb_put(skb, len);
 509
 510                 skb->protocol = eth_type_trans(skb, bp->dev);
 511                 skb->ip_summed = CHECKSUM_UNNECESSARY;
 512
 513                 if (!bnx2x_fill_frag_skb(bp, fp, queue, skb, cqe, cqe_idx)) {
 514                         if (tpa_info->parsing_flags & PARSING_FLAGS_VLAN)
 515                                 __vlan_hwaccel_put_tag(skb, tpa_info->vlan_tag);
 516                         napi_gro_receive(&fp->napi, skb);
 517                 } else {
 518                         DP(NETIF_MSG_RX_STATUS, "Failed to allocate new pages"
 519                            " - dropping packet!\n");
 520                         dev_kfree_skb_any(skb);
 521                 }
 522
 523
 524                 /* put new skb in bin */
 525                 rx_buf->skb = new_skb;
 526
 527                 return;
 528         }
 529
 530 drop:
 531         /* drop the packet and keep the buffer in the bin */
 532         DP(NETIF_MSG_RX_STATUS,
 533            "Failed to allocate or map a new skb - dropping packet!\n");
 534         fp->eth_q_stats.rx_skb_alloc_failed++;
 535 }
 536
 537 /* Set Toeplitz hash value in the skb using the value from the
 538  * CQE (calculated by HW).
 539  */
 540 static inline void bnx2x_set_skb_rxhash(struct bnx2x *bp, union eth_rx_cqe *cqe,
 541                                         struct sk_buff *skb)
 542 {
 543         /* Set Toeplitz hash from CQE */
 544         if ((bp->dev->features & NETIF_F_RXHASH) &&
 545             (cqe->fast_path_cqe.status_flags &
 546              ETH_FAST_PATH_RX_CQE_RSS_HASH_FLG))
 547                 skb->rxhash =
 548                 le32_to_cpu(cqe->fast_path_cqe.rss_hash_result);
 549 }
 550
 551 int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget)
 552 {
 553         struct bnx2x *bp = fp->bp;
 554         u16 bd_cons, bd_prod, bd_prod_fw, comp_ring_cons;
 555         u16 hw_comp_cons, sw_comp_cons, sw_comp_prod;
 556         int rx_pkt = 0;
 557
 558 #ifdef BNX2X_STOP_ON_ERROR
 559         if (unlikely(bp->panic))
 560                 return 0;
 561 #endif
 562
 563         /* CQ "next element" is of the size of the regular element,
 564            that's why it's ok here */
 565         hw_comp_cons = le16_to_cpu(*fp->rx_cons_sb);
 566         if ((hw_comp_cons & MAX_RCQ_DESC_CNT) == MAX_RCQ_DESC_CNT)
 567                 hw_comp_cons++;
 568
 569         bd_cons = fp->rx_bd_cons;
 570         bd_prod = fp->rx_bd_prod;
 571         bd_prod_fw = bd_prod;
 572         sw_comp_cons = fp->rx_comp_cons;
 573         sw_comp_prod = fp->rx_comp_prod;
 574
 575         /* Memory barrier necessary as speculative reads of the rx
 576          * buffer can be ahead of the index in the status block
 577          */
 578         rmb();
 579
 580         DP(NETIF_MSG_RX_STATUS,
 581            "queue[%d]:  hw_comp_cons %u  sw_comp_cons %u\n",
 582            fp->index, hw_comp_cons, sw_comp_cons);
 583
 584         while (sw_comp_cons != hw_comp_cons) {
 585                 struct sw_rx_bd *rx_buf = NULL;
 586                 struct sk_buff *skb;
 587                 union eth_rx_cqe *cqe;
 588                 struct eth_fast_path_rx_cqe *cqe_fp;
 589                 u8 cqe_fp_flags;
 590                 enum eth_rx_cqe_type cqe_fp_type;
 591                 u16 len, pad;
 592
 593 #ifdef BNX2X_STOP_ON_ERROR
 594                 if (unlikely(bp->panic))
 595                         return 0;
 596 #endif
 597
 598                 comp_ring_cons = RCQ_BD(sw_comp_cons);
 599                 bd_prod = RX_BD(bd_prod);
 600                 bd_cons = RX_BD(bd_cons);
 601
 602                 /* Prefetch the page containing the BD descriptor
 603                    at producer's index. It will be needed when new skb is
 604                    allocated */
 605                 prefetch((void *)(PAGE_ALIGN((unsigned long)
 606                                              (&fp->rx_desc_ring[bd_prod])) -
 607                                   PAGE_SIZE + 1));
 608
 609                 cqe = &fp->rx_comp_ring[comp_ring_cons];
 610                 cqe_fp = &cqe->fast_path_cqe;
 611                 cqe_fp_flags = cqe_fp->type_error_flags;
 612                 cqe_fp_type = cqe_fp_flags & ETH_FAST_PATH_RX_CQE_TYPE;
 613
 614                 DP(NETIF_MSG_RX_STATUS, "CQE type %x  err %x  status %x"
 615                    "  queue %x  vlan %x  len %u\n", CQE_TYPE(cqe_fp_flags),
 616                    cqe_fp_flags, cqe_fp->status_flags,
 617                    le32_to_cpu(cqe_fp->rss_hash_result),
 618                    le16_to_cpu(cqe_fp->vlan_tag), le16_to_cpu(cqe_fp->pkt_len));
 619
 620                 /* is this a slowpath msg? */
 621                 if (unlikely(CQE_TYPE_SLOW(cqe_fp_type))) {
 622                         bnx2x_sp_event(fp, cqe);
 623                         goto next_cqe;
 624
 625                 /* this is an rx packet */
 626                 } else {
 627                         rx_buf = &fp->rx_buf_ring[bd_cons];
 628                         skb = rx_buf->skb;
 629                         prefetch(skb);
 630
 631                         if (!CQE_TYPE_FAST(cqe_fp_type)) {
 632 #ifdef BNX2X_STOP_ON_ERROR
 633                                 /* sanity check */
 634                                 if (fp->disable_tpa &&
 635                                     (CQE_TYPE_START(cqe_fp_type) ||
 636                                      CQE_TYPE_STOP(cqe_fp_type)))
 637                                         BNX2X_ERR("START/STOP packet while "
 638                                                   "disable_tpa type %x\n",
 639                                                   CQE_TYPE(cqe_fp_type));
 640 #endif
 641
 642                                 if (CQE_TYPE_START(cqe_fp_type)) {
 643                                         u16 queue = cqe_fp->queue_index;
 644                                         DP(NETIF_MSG_RX_STATUS,
 645                                            "calling tpa_start on queue %d\n",
 646                                            queue);
 647
 648                                         bnx2x_tpa_start(fp, queue, skb,
 649                                                         bd_cons, bd_prod,
 650                                                         cqe_fp);
 651
 652                                         /* Set Toeplitz hash for LRO skb */
 653                                         bnx2x_set_skb_rxhash(bp, cqe, skb);
 654
 655                                         goto next_rx;
 656
 657                                 } else {
 658                                         u16 queue =
 659                                                 cqe->end_agg_cqe.queue_index;
 660                                         DP(NETIF_MSG_RX_STATUS,
 661                                            "calling tpa_stop on queue %d\n",
 662                                            queue);
 663
 664                                         bnx2x_tpa_stop(bp, fp, queue,
 665                                                        &cqe->end_agg_cqe,
 666                                                        comp_ring_cons);
 667 #ifdef BNX2X_STOP_ON_ERROR
 668                                         if (bp->panic)
 669                                                 return 0;
 670 #endif
 671
 672                                         bnx2x_update_sge_prod(fp, cqe_fp);
 673                                         goto next_cqe;
 674                                 }
 675                         }
 676                         /* non TPA */
 677                         len = le16_to_cpu(cqe_fp->pkt_len);
 678                         pad = cqe_fp->placement_offset;
 679                         dma_sync_single_for_cpu(&bp->pdev->dev,
 680                                         dma_unmap_addr(rx_buf, mapping),
 681                                                        pad + RX_COPY_THRESH,
 682                                                        DMA_FROM_DEVICE);
 683                         prefetch(((char *)(skb)) + L1_CACHE_BYTES);
 684
 685                         /* is this an error packet? */
 686                         if (unlikely(cqe_fp_flags & ETH_RX_ERROR_FALGS)) {
 687                                 DP(NETIF_MSG_RX_ERR,
 688                                    "ERROR  flags %x  rx packet %u\n",
 689                                    cqe_fp_flags, sw_comp_cons);
 690                                 fp->eth_q_stats.rx_err_discard_pkt++;
 691                                 goto reuse_rx;
 692                         }
 693
 694                         /* Since we don't have a jumbo ring
 695                          * copy small packets if mtu > 1500
 696                          */
 697                         if ((bp->dev->mtu > ETH_MAX_PACKET_SIZE) &&
 698                             (len <= RX_COPY_THRESH)) {
 699                                 struct sk_buff *new_skb;
 700
 701                                 new_skb = netdev_alloc_skb(bp->dev, len + pad);
 702                                 if (new_skb == NULL) {
 703                                         DP(NETIF_MSG_RX_ERR,
 704                                            "ERROR  packet dropped "
 705                                            "because of alloc failure\n");
 706                                         fp->eth_q_stats.rx_skb_alloc_failed++;
 707                                         goto reuse_rx;
 708                                 }
 709
 710                                 /* aligned copy */
 711                                 skb_copy_from_linear_data_offset(skb, pad,
 712                                                     new_skb->data + pad, len);
 713                                 skb_reserve(new_skb, pad);
 714                                 skb_put(new_skb, len);
 715
 716                                 bnx2x_reuse_rx_skb(fp, bd_cons, bd_prod);
 717
 718                                 skb = new_skb;
 719
 720                         } else
 721                         if (likely(bnx2x_alloc_rx_skb(bp, fp, bd_prod) == 0)) {
 722                                 dma_unmap_single(&bp->pdev->dev,
 723                                         dma_unmap_addr(rx_buf, mapping),
 724                                                  fp->rx_buf_size,
 725                                                  DMA_FROM_DEVICE);
 726                                 skb_reserve(skb, pad);
 727                                 skb_put(skb, len);
 728
 729                         } else {
 730                                 DP(NETIF_MSG_RX_ERR,
 731                                    "ERROR  packet dropped because "
 732                                    "of alloc failure\n");
 733                                 fp->eth_q_stats.rx_skb_alloc_failed++;
 734 reuse_rx:
 735                                 bnx2x_reuse_rx_skb(fp, bd_cons, bd_prod);
 736                                 goto next_rx;
 737                         }
 738
 739                         skb->protocol = eth_type_trans(skb, bp->dev);
 740
 741                         /* Set Toeplitz hash for a none-LRO skb */
 742                         bnx2x_set_skb_rxhash(bp, cqe, skb);
 743
 744                         skb_checksum_none_assert(skb);
 745
 746                         if (bp->dev->features & NETIF_F_RXCSUM) {
 747
 748                                 if (likely(BNX2X_RX_CSUM_OK(cqe)))
 749                                         skb->ip_summed = CHECKSUM_UNNECESSARY;
 750                                 else
 751                                         fp->eth_q_stats.hw_csum_err++;
 752                         }
 753                 }
 754
 755                 skb_record_rx_queue(skb, fp->index);
 756
 757                 if (le16_to_cpu(cqe_fp->pars_flags.flags) &
 758                     PARSING_FLAGS_VLAN)
 759                         __vlan_hwaccel_put_tag(skb,
 760                                                le16_to_cpu(cqe_fp->vlan_tag));
 761                 napi_gro_receive(&fp->napi, skb);
 762
 763
 764 next_rx:
 765                 rx_buf->skb = NULL;
 766
 767                 bd_cons = NEXT_RX_IDX(bd_cons);
 768                 bd_prod = NEXT_RX_IDX(bd_prod);
 769                 bd_prod_fw = NEXT_RX_IDX(bd_prod_fw);
 770                 rx_pkt++;
 771 next_cqe:
 772                 sw_comp_prod = NEXT_RCQ_IDX(sw_comp_prod);
 773                 sw_comp_cons = NEXT_RCQ_IDX(sw_comp_cons);
 774
 775                 if (rx_pkt == budget)
 776                         break;
 777         } /* while */
 778
 779         fp->rx_bd_cons = bd_cons;
 780         fp->rx_bd_prod = bd_prod_fw;
 781         fp->rx_comp_cons = sw_comp_cons;
 782         fp->rx_comp_prod = sw_comp_prod;
 783
 784         /* Update producers */
 785         bnx2x_update_rx_prod(bp, fp, bd_prod_fw, sw_comp_prod,
 786                              fp->rx_sge_prod);
 787
 788         fp->rx_pkt += rx_pkt;
 789         fp->rx_calls++;
 790
 791         return rx_pkt;
 792 }
 793
 794 static irqreturn_t bnx2x_msix_fp_int(int irq, void *fp_cookie)
 795 {
 796         struct bnx2x_fastpath *fp = fp_cookie;
 797         struct bnx2x *bp = fp->bp;
 798         u8 cos;
 799
 800         DP(BNX2X_MSG_FP, "got an MSI-X interrupt on IDX:SB "
 801                          "[fp %d fw_sd %d igusb %d]\n",
 802            fp->index, fp->fw_sb_id, fp->igu_sb_id);
 803         bnx2x_ack_sb(bp, fp->igu_sb_id, USTORM_ID, 0, IGU_INT_DISABLE, 0);
 804
 805 #ifdef BNX2X_STOP_ON_ERROR
 806         if (unlikely(bp->panic))
 807                 return IRQ_HANDLED;
 808 #endif
 809
 810         /* Handle Rx and Tx according to MSI-X vector */
 811         prefetch(fp->rx_cons_sb);
 812
 813         for_each_cos_in_tx_queue(fp, cos)
 814                 prefetch(fp->txdata[cos].tx_cons_sb);
 815
 816         prefetch(&fp->sb_running_index[SM_RX_ID]);
 817         napi_schedule(&bnx2x_fp(bp, fp->index, napi));
 818
 819         return IRQ_HANDLED;
 820 }
 821
 822 /* HW Lock for shared dual port PHYs */
 823 void bnx2x_acquire_phy_lock(struct bnx2x *bp)
 824 {
 825         mutex_lock(&bp->port.phy_mutex);
 826
 827         if (bp->port.need_hw_lock)
 828                 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_MDIO);
 829 }
 830
 831 void bnx2x_release_phy_lock(struct bnx2x *bp)
 832 {
 833         if (bp->port.need_hw_lock)
 834                 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_MDIO);
 835
 836         mutex_unlock(&bp->port.phy_mutex);
 837 }
 838
 839 /* calculates MF speed according to current linespeed and MF configuration */
 840 u16 bnx2x_get_mf_speed(struct bnx2x *bp)
 841 {
 842         u16 line_speed = bp->link_vars.line_speed;
 843         if (IS_MF(bp)) {
 844                 u16 maxCfg = bnx2x_extract_max_cfg(bp,
 845                                                    bp->mf_config[BP_VN(bp)]);
 846
 847                 /* Calculate the current MAX line speed limit for the MF
 848                  * devices
 849                  */
 850                 if (IS_MF_SI(bp))
 851                         line_speed = (line_speed * maxCfg) / 100;
 852                 else { /* SD mode */
 853                         u16 vn_max_rate = maxCfg * 100;
 854
 855                         if (vn_max_rate < line_speed)
 856                                 line_speed = vn_max_rate;
 857                 }
 858         }
 859
 860         return line_speed;
 861 }
 862
 863 /**
 864  * bnx2x_fill_report_data - fill link report data to report
 865  *
 866  * @bp:         driver handle
 867  * @data:       link state to update
 868  *
 869  * It uses a none-atomic bit operations because is called under the mutex.
 870  */
 871 static inline void bnx2x_fill_report_data(struct bnx2x *bp,
 872                                           struct bnx2x_link_report_data *data)
 873 {
 874         u16 line_speed = bnx2x_get_mf_speed(bp);
 875
 876         memset(data, 0, sizeof(*data));
 877
 878         /* Fill the report data: efective line speed */
 879         data->line_speed = line_speed;
 880
 881         /* Link is down */
 882         if (!bp->link_vars.link_up || (bp->flags & MF_FUNC_DIS))
 883                 __set_bit(BNX2X_LINK_REPORT_LINK_DOWN,
 884                           &data->link_report_flags);
 885
 886         /* Full DUPLEX */
 887         if (bp->link_vars.duplex == DUPLEX_FULL)
 888                 __set_bit(BNX2X_LINK_REPORT_FD, &data->link_report_flags);
 889
 890         /* Rx Flow Control is ON */
 891         if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_RX)
 892                 __set_bit(BNX2X_LINK_REPORT_RX_FC_ON, &data->link_report_flags);
 893
 894         /* Tx Flow Control is ON */
 895         if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_TX)
 896                 __set_bit(BNX2X_LINK_REPORT_TX_FC_ON, &data->link_report_flags);
 897 }
 898
 899 /**
 900  * bnx2x_link_report - report link status to OS.
 901  *
 902  * @bp:         driver handle
 903  *
 904  * Calls the __bnx2x_link_report() under the same locking scheme
 905  * as a link/PHY state managing code to ensure a consistent link
 906  * reporting.
 907  */
 908
 909 void bnx2x_link_report(struct bnx2x *bp)
 910 {
 911         bnx2x_acquire_phy_lock(bp);
 912         __bnx2x_link_report(bp);
 913         bnx2x_release_phy_lock(bp);
 914 }
 915
 916 /**
 917  * __bnx2x_link_report - report link status to OS.
 918  *
 919  * @bp:         driver handle
 920  *
 921  * None atomic inmlementation.
 922  * Should be called under the phy_lock.
 923  */
 924 void __bnx2x_link_report(struct bnx2x *bp)
 925 {
 926         struct bnx2x_link_report_data cur_data;
 927
 928         /* reread mf_cfg */
 929         if (!CHIP_IS_E1(bp))
 930                 bnx2x_read_mf_cfg(bp);
 931
 932         /* Read the current link report info */
 933         bnx2x_fill_report_data(bp, &cur_data);
 934
 935         /* Don't report link down or exactly the same link status twice */
 936         if (!memcmp(&cur_data, &bp->last_reported_link, sizeof(cur_data)) ||
 937             (test_bit(BNX2X_LINK_REPORT_LINK_DOWN,
 938                       &bp->last_reported_link.link_report_flags) &&
 939              test_bit(BNX2X_LINK_REPORT_LINK_DOWN,
 940                       &cur_data.link_report_flags)))
 941                 return;
 942
 943         bp->link_cnt++;
 944
 945         /* We are going to report a new link parameters now -
 946          * remember the current data for the next time.
 947          */
 948         memcpy(&bp->last_reported_link, &cur_data, sizeof(cur_data));
 949
 950         if (test_bit(BNX2X_LINK_REPORT_LINK_DOWN,
 951                      &cur_data.link_report_flags)) {
 952                 netif_carrier_off(bp->dev);
 953                 netdev_err(bp->dev, "NIC Link is Down\n");
 954                 return;
 955         } else {
 956                 netif_carrier_on(bp->dev);
 957                 netdev_info(bp->dev, "NIC Link is Up, ");
 958                 pr_cont("%d Mbps ", cur_data.line_speed);
 959
 960                 if (test_and_clear_bit(BNX2X_LINK_REPORT_FD,
 961                                        &cur_data.link_report_flags))
 962                         pr_cont("full duplex");
 963                 else
 964                         pr_cont("half duplex");
 965
 966                 /* Handle the FC at the end so that only these flags would be
 967                  * possibly set. This way we may easily check if there is no FC
 968                  * enabled.
 969                  */
 970                 if (cur_data.link_report_flags) {
 971                         if (test_bit(BNX2X_LINK_REPORT_RX_FC_ON,
 972                                      &cur_data.link_report_flags)) {
 973                                 pr_cont(", receive ");
 974                                 if (test_bit(BNX2X_LINK_REPORT_TX_FC_ON,
 975                                      &cur_data.link_report_flags))
 976                                         pr_cont("& transmit ");
 977                         } else {
 978                                 pr_cont(", transmit ");
 979                         }
 980                         pr_cont("flow control ON");
 981                 }
 982                 pr_cont("\n");
 983         }
 984 }
 985
 986 void bnx2x_init_rx_rings(struct bnx2x *bp)
 987 {
 988         int func = BP_FUNC(bp);
 989         int max_agg_queues = CHIP_IS_E1(bp) ? ETH_MAX_AGGREGATION_QUEUES_E1 :
 990                                               ETH_MAX_AGGREGATION_QUEUES_E1H_E2;
 991         u16 ring_prod;
 992         int i, j;
 993
 994         /* Allocate TPA resources */
 995         for_each_rx_queue(bp, j) {
 996                 struct bnx2x_fastpath *fp = &bp->fp[j];
 997
 998                 DP(NETIF_MSG_IFUP,
 999                    "mtu %d  rx_buf_size %d\n", bp->dev->mtu, fp->rx_buf_size);
1000
1001                 if (!fp->disable_tpa) {
1002                         /* Fill the per-aggregtion pool */
1003                         for (i = 0; i < max_agg_queues; i++) {
1004                                 struct bnx2x_agg_info *tpa_info =
1005                                         &fp->tpa_info[i];
1006                                 struct sw_rx_bd *first_buf =
1007                                         &tpa_info->first_buf;
1008
1009                                 first_buf->skb = netdev_alloc_skb(bp->dev,
1010                                                        fp->rx_buf_size);
1011                                 if (!first_buf->skb) {
1012                                         BNX2X_ERR("Failed to allocate TPA "
1013                                                   "skb pool for queue[%d] - "
1014                                                   "disabling TPA on this "
1015                                                   "queue!\n", j);
1016                                         bnx2x_free_tpa_pool(bp, fp, i);
1017                                         fp->disable_tpa = 1;
1018                                         break;
1019                                 }
1020                                 dma_unmap_addr_set(first_buf, mapping, 0);
1021                                 tpa_info->tpa_state = BNX2X_TPA_STOP;
1022                         }
1023
1024                         /* "next page" elements initialization */
1025                         bnx2x_set_next_page_sgl(fp);
1026
1027                         /* set SGEs bit mask */
1028                         bnx2x_init_sge_ring_bit_mask(fp);
1029
1030                         /* Allocate SGEs and initialize the ring elements */
1031                         for (i = 0, ring_prod = 0;
1032                              i < MAX_RX_SGE_CNT*NUM_RX_SGE_PAGES; i++) {
1033
1034                                 if (bnx2x_alloc_rx_sge(bp, fp, ring_prod) < 0) {
1035                                         BNX2X_ERR("was only able to allocate "
1036                                                   "%d rx sges\n", i);
1037                                         BNX2X_ERR("disabling TPA for "
1038                                                   "queue[%d]\n", j);
1039                                         /* Cleanup already allocated elements */
1040                                         bnx2x_free_rx_sge_range(bp, fp,
1041                                                                 ring_prod);
1042                                         bnx2x_free_tpa_pool(bp, fp,
1043                                                             max_agg_queues);
1044                                         fp->disable_tpa = 1;
1045                                         ring_prod = 0;
1046                                         break;
1047                                 }
1048                                 ring_prod = NEXT_SGE_IDX(ring_prod);
1049                         }
1050
1051                         fp->rx_sge_prod = ring_prod;
1052                 }
1053         }
1054
1055         for_each_rx_queue(bp, j) {
1056                 struct bnx2x_fastpath *fp = &bp->fp[j];
1057
1058                 fp->rx_bd_cons = 0;
1059
1060                 /* Activate BD ring */
1061                 /* Warning!
1062                  * this will generate an interrupt (to the TSTORM)
1063                  * must only be done after chip is initialized
1064                  */
1065                 bnx2x_update_rx_prod(bp, fp, fp->rx_bd_prod, fp->rx_comp_prod,
1066                                      fp->rx_sge_prod);
1067
1068                 if (j != 0)
1069                         continue;
1070
1071                 if (CHIP_IS_E1(bp)) {
1072                         REG_WR(bp, BAR_USTRORM_INTMEM +
1073                                USTORM_MEM_WORKAROUND_ADDRESS_OFFSET(func),
1074                                U64_LO(fp->rx_comp_mapping));
1075                         REG_WR(bp, BAR_USTRORM_INTMEM +
1076                                USTORM_MEM_WORKAROUND_ADDRESS_OFFSET(func) + 4,
1077                                U64_HI(fp->rx_comp_mapping));
1078                 }
1079         }
1080 }
1081
1082 static void bnx2x_free_tx_skbs(struct bnx2x *bp)
1083 {
1084         int i;
1085         u8 cos;
1086
1087         for_each_tx_queue(bp, i) {
1088                 struct bnx2x_fastpath *fp = &bp->fp[i];
1089                 for_each_cos_in_tx_queue(fp, cos) {
1090                         struct bnx2x_fp_txdata *txdata = &fp->txdata[cos];
1091
1092                         u16 bd_cons = txdata->tx_bd_cons;
1093                         u16 sw_prod = txdata->tx_pkt_prod;
1094                         u16 sw_cons = txdata->tx_pkt_cons;
1095
1096                         while (sw_cons != sw_prod) {
1097                                 bd_cons = bnx2x_free_tx_pkt(bp, txdata,
1098                                                             TX_BD(sw_cons));
1099                                 sw_cons++;
1100                         }
1101                 }
1102         }
1103 }
1104
1105 static void bnx2x_free_rx_bds(struct bnx2x_fastpath *fp)
1106 {
1107         struct bnx2x *bp = fp->bp;
1108         int i;
1109
1110         /* ring wasn't allocated */
1111         if (fp->rx_buf_ring == NULL)
1112                 return;
1113
1114         for (i = 0; i < NUM_RX_BD; i++) {
1115                 struct sw_rx_bd *rx_buf = &fp->rx_buf_ring[i];
1116                 struct sk_buff *skb = rx_buf->skb;
1117
1118                 if (skb == NULL)
1119                         continue;
1120                 dma_unmap_single(&bp->pdev->dev,
1121                                  dma_unmap_addr(rx_buf, mapping),
1122                                  fp->rx_buf_size, DMA_FROM_DEVICE);
1123
1124                 rx_buf->skb = NULL;
1125                 dev_kfree_skb(skb);
1126         }
1127 }
1128
1129 static void bnx2x_free_rx_skbs(struct bnx2x *bp)
1130 {
1131         int j;
1132
1133         for_each_rx_queue(bp, j) {
1134                 struct bnx2x_fastpath *fp = &bp->fp[j];
1135
1136                 bnx2x_free_rx_bds(fp);
1137
1138                 if (!fp->disable_tpa)
1139                         bnx2x_free_tpa_pool(bp, fp, CHIP_IS_E1(bp) ?
1140                                             ETH_MAX_AGGREGATION_QUEUES_E1 :
1141                                             ETH_MAX_AGGREGATION_QUEUES_E1H_E2);
1142         }
1143 }
1144
1145 void bnx2x_free_skbs(struct bnx2x *bp)
1146 {
1147         bnx2x_free_tx_skbs(bp);
1148         bnx2x_free_rx_skbs(bp);
1149 }
1150
1151 void bnx2x_update_max_mf_config(struct bnx2x *bp, u32 value)
1152 {
1153         /* load old values */
1154         u32 mf_cfg = bp->mf_config[BP_VN(bp)];
1155
1156         if (value != bnx2x_extract_max_cfg(bp, mf_cfg)) {
1157                 /* leave all but MAX value */
1158                 mf_cfg &= ~FUNC_MF_CFG_MAX_BW_MASK;
1159
1160                 /* set new MAX value */
1161                 mf_cfg |= (value << FUNC_MF_CFG_MAX_BW_SHIFT)
1162                                 & FUNC_MF_CFG_MAX_BW_MASK;
1163
1164                 bnx2x_fw_command(bp, DRV_MSG_CODE_SET_MF_BW, mf_cfg);
1165         }
1166 }
1167
1168 /**
1169  * bnx2x_free_msix_irqs - free previously requested MSI-X IRQ vectors
1170  *
1171  * @bp:         driver handle
1172  * @nvecs:      number of vectors to be released
1173  */
1174 static void bnx2x_free_msix_irqs(struct bnx2x *bp, int nvecs)
1175 {
1176         int i, offset = 0;
1177
1178         if (nvecs == offset)
1179                 return;
1180         free_irq(bp->msix_table[offset].vector, bp->dev);
1181         DP(NETIF_MSG_IFDOWN, "released sp irq (%d)\n",
1182            bp->msix_table[offset].vector);
1183         offset++;
1184 #ifdef BCM_CNIC
1185         if (nvecs == offset)
1186                 return;
1187         offset++;
1188 #endif
1189
1190         for_each_eth_queue(bp, i) {
1191                 if (nvecs == offset)
1192                         return;
1193                 DP(NETIF_MSG_IFDOWN, "about to release fp #%d->%d "
1194                    "irq\n", i, bp->msix_table[offset].vector);
1195
1196                 free_irq(bp->msix_table[offset++].vector, &bp->fp[i]);
1197         }
1198 }
1199
1200 void bnx2x_free_irq(struct bnx2x *bp)
1201 {
1202         if (bp->flags & USING_MSIX_FLAG)
1203                 bnx2x_free_msix_irqs(bp, BNX2X_NUM_ETH_QUEUES(bp) +
1204                                      CNIC_PRESENT + 1);
1205         else if (bp->flags & USING_MSI_FLAG)
1206                 free_irq(bp->pdev->irq, bp->dev);
1207         else
1208                 free_irq(bp->pdev->irq, bp->dev);
1209 }
1210
1211 int bnx2x_enable_msix(struct bnx2x *bp)
1212 {
1213         int msix_vec = 0, i, rc, req_cnt;
1214
1215         bp->msix_table[msix_vec].entry = msix_vec;
1216         DP(NETIF_MSG_IFUP, "msix_table[0].entry = %d (slowpath)\n",
1217            bp->msix_table[0].entry);
1218         msix_vec++;
1219
1220 #ifdef BCM_CNIC
1221         bp->msix_table[msix_vec].entry = msix_vec;
1222         DP(NETIF_MSG_IFUP, "msix_table[%d].entry = %d (CNIC)\n",
1223            bp->msix_table[msix_vec].entry, bp->msix_table[msix_vec].entry);
1224         msix_vec++;
1225 #endif
1226         /* We need separate vectors for ETH queues only (not FCoE) */
1227         for_each_eth_queue(bp, i) {
1228                 bp->msix_table[msix_vec].entry = msix_vec;
1229                 DP(NETIF_MSG_IFUP, "msix_table[%d].entry = %d "
1230                    "(fastpath #%u)\n", msix_vec, msix_vec, i);
1231                 msix_vec++;
1232         }
1233
1234         req_cnt = BNX2X_NUM_ETH_QUEUES(bp) + CNIC_PRESENT + 1;
1235
1236         rc = pci_enable_msix(bp->pdev, &bp->msix_table[0], req_cnt);
1237
1238         /*
1239          * reconfigure number of tx/rx queues according to available
1240          * MSI-X vectors
1241          */
1242         if (rc >= BNX2X_MIN_MSIX_VEC_CNT) {
1243                 /* how less vectors we will have? */
1244                 int diff = req_cnt - rc;
1245
1246                 DP(NETIF_MSG_IFUP,
1247                    "Trying to use less MSI-X vectors: %d\n", rc);
1248
1249                 rc = pci_enable_msix(bp->pdev, &bp->msix_table[0], rc);
1250
1251                 if (rc) {
1252                         DP(NETIF_MSG_IFUP,
1253                            "MSI-X is not attainable  rc %d\n", rc);
1254                         return rc;
1255                 }
1256                 /*
1257                  * decrease number of queues by number of unallocated entries
1258                  */
1259                 bp->num_queues -= diff;
1260
1261                 DP(NETIF_MSG_IFUP, "New queue configuration set: %d\n",
1262                                   bp->num_queues);
1263         } else if (rc) {
1264                 /* fall to INTx if not enough memory */
1265                 if (rc == -ENOMEM)
1266                         bp->flags |= DISABLE_MSI_FLAG;
1267                 DP(NETIF_MSG_IFUP, "MSI-X is not attainable  rc %d\n", rc);
1268                 return rc;
1269         }
1270
1271         bp->flags |= USING_MSIX_FLAG;
1272
1273         return 0;
1274 }
1275
1276 static int bnx2x_req_msix_irqs(struct bnx2x *bp)
1277 {
1278         int i, rc, offset = 0;
1279
1280         rc = request_irq(bp->msix_table[offset++].vector,
1281                          bnx2x_msix_sp_int, 0,
1282                          bp->dev->name, bp->dev);
1283         if (rc) {
1284                 BNX2X_ERR("request sp irq failed\n");
1285                 return -EBUSY;
1286         }
1287
1288 #ifdef BCM_CNIC
1289         offset++;
1290 #endif
1291         for_each_eth_queue(bp, i) {
1292                 struct bnx2x_fastpath *fp = &bp->fp[i];
1293                 snprintf(fp->name, sizeof(fp->name), "%s-fp-%d",
1294                          bp->dev->name, i);
1295
1296                 rc = request_irq(bp->msix_table[offset].vector,
1297                                  bnx2x_msix_fp_int, 0, fp->name, fp);
1298                 if (rc) {
1299                         BNX2X_ERR("request fp #%d irq (%d) failed  rc %d\n", i,
1300                               bp->msix_table[offset].vector, rc);
1301                         bnx2x_free_msix_irqs(bp, offset);
1302                         return -EBUSY;
1303                 }
1304
1305                 offset++;
1306         }
1307
1308         i = BNX2X_NUM_ETH_QUEUES(bp);
1309         offset = 1 + CNIC_PRESENT;
1310         netdev_info(bp->dev, "using MSI-X  IRQs: sp %d  fp[%d] %d"
1311                " ... fp[%d] %d\n",
1312                bp->msix_table[0].vector,
1313                0, bp->msix_table[offset].vector,
1314                i - 1, bp->msix_table[offset + i - 1].vector);
1315
1316         return 0;
1317 }
1318
1319 int bnx2x_enable_msi(struct bnx2x *bp)
1320 {
1321         int rc;
1322
1323         rc = pci_enable_msi(bp->pdev);
1324         if (rc) {
1325                 DP(NETIF_MSG_IFUP, "MSI is not attainable\n");
1326                 return -1;
1327         }
1328         bp->flags |= USING_MSI_FLAG;
1329
1330         return 0;
1331 }
1332
1333 static int bnx2x_req_irq(struct bnx2x *bp)
1334 {
1335         unsigned long flags;
1336         int rc;
1337
1338         if (bp->flags & USING_MSI_FLAG)
1339                 flags = 0;
1340         else
1341                 flags = IRQF_SHARED;
1342
1343         rc = request_irq(bp->pdev->irq, bnx2x_interrupt, flags,
1344                          bp->dev->name, bp->dev);
1345         return rc;
1346 }
1347
1348 static inline int bnx2x_setup_irqs(struct bnx2x *bp)
1349 {
1350         int rc = 0;
1351         if (bp->flags & USING_MSIX_FLAG) {
1352                 rc = bnx2x_req_msix_irqs(bp);
1353                 if (rc)
1354                         return rc;
1355         } else {
1356                 bnx2x_ack_int(bp);
1357                 rc = bnx2x_req_irq(bp);
1358                 if (rc) {
1359                         BNX2X_ERR("IRQ request failed  rc %d, aborting\n", rc);
1360                         return rc;
1361                 }
1362                 if (bp->flags & USING_MSI_FLAG) {
1363                         bp->dev->irq = bp->pdev->irq;
1364                         netdev_info(bp->dev, "using MSI  IRQ %d\n",
1365                                bp->pdev->irq);
1366                 }
1367         }
1368
1369         return 0;
1370 }
1371
1372 static inline void bnx2x_napi_enable(struct bnx2x *bp)
1373 {
1374         int i;
1375
1376         for_each_rx_queue(bp, i)
1377                 napi_enable(&bnx2x_fp(bp, i, napi));
1378 }
1379
1380 static inline void bnx2x_napi_disable(struct bnx2x *bp)
1381 {
1382         int i;
1383
1384         for_each_rx_queue(bp, i)
1385                 napi_disable(&bnx2x_fp(bp, i, napi));
1386 }
1387
1388 void bnx2x_netif_start(struct bnx2x *bp)
1389 {
1390         if (netif_running(bp->dev)) {
1391                 bnx2x_napi_enable(bp);
1392                 bnx2x_int_enable(bp);
1393                 if (bp->state == BNX2X_STATE_OPEN)
1394                         netif_tx_wake_all_queues(bp->dev);
1395         }
1396 }
1397
1398 void bnx2x_netif_stop(struct bnx2x *bp, int disable_hw)
1399 {
1400         bnx2x_int_disable_sync(bp, disable_hw);
1401         bnx2x_napi_disable(bp);
1402 }
1403
1404 u16 bnx2x_select_queue(struct net_device *dev, struct sk_buff *skb)
1405 {
1406         struct bnx2x *bp = netdev_priv(dev);
1407 #ifdef BCM_CNIC
1408         if (NO_FCOE(bp))
1409                 return skb_tx_hash(dev, skb);
1410         else {
1411                 struct ethhdr *hdr = (struct ethhdr *)skb->data;
1412                 u16 ether_type = ntohs(hdr->h_proto);
1413
1414                 /* Skip VLAN tag if present */
1415                 if (ether_type == ETH_P_8021Q) {
1416                         struct vlan_ethhdr *vhdr =
1417                                 (struct vlan_ethhdr *)skb->data;
1418
1419                         ether_type = ntohs(vhdr->h_vlan_encapsulated_proto);
1420                 }
1421
1422                 /* If ethertype is FCoE or FIP - use FCoE ring */
1423                 if ((ether_type == ETH_P_FCOE) || (ether_type == ETH_P_FIP))
1424                         return bnx2x_fcoe_tx(bp, txq_index);
1425         }
1426 #endif
1427         /* Select a none-FCoE queue:  if FCoE is enabled, exclude FCoE L2 ring
1428          */
1429         return __skb_tx_hash(dev, skb, BNX2X_NUM_ETH_QUEUES(bp));
1430 }
1431
1432 void bnx2x_set_num_queues(struct bnx2x *bp)
1433 {
1434         switch (bp->multi_mode) {
1435         case ETH_RSS_MODE_DISABLED:
1436                 bp->num_queues = 1;
1437                 break;
1438         case ETH_RSS_MODE_REGULAR:
1439                 bp->num_queues = bnx2x_calc_num_queues(bp);
1440                 break;
1441
1442         default:
1443                 bp->num_queues = 1;
1444                 break;
1445         }
1446
1447         /* Add special queues */
1448         bp->num_queues += NON_ETH_CONTEXT_USE;
1449 }
1450
1451 static inline int bnx2x_set_real_num_queues(struct bnx2x *bp)
1452 {
1453         int rc, tx, rx;
1454
1455         tx = MAX_TXQS_PER_COS * bp->max_cos;
1456         rx = BNX2X_NUM_ETH_QUEUES(bp);
1457
1458 /* account for fcoe queue */
1459 #ifdef BCM_CNIC
1460         if (!NO_FCOE(bp)) {
1461                 rx += FCOE_PRESENT;
1462                 tx += FCOE_PRESENT;
1463         }
1464 #endif
1465
1466         rc = netif_set_real_num_tx_queues(bp->dev, tx);
1467         if (rc) {
1468                 BNX2X_ERR("Failed to set real number of Tx queues: %d\n", rc);
1469                 return rc;
1470         }
1471         rc = netif_set_real_num_rx_queues(bp->dev, rx);
1472         if (rc) {
1473                 BNX2X_ERR("Failed to set real number of Rx queues: %d\n", rc);
1474                 return rc;
1475         }
1476
1477         DP(NETIF_MSG_DRV, "Setting real num queues to (tx, rx) (%d, %d)\n",
1478                           tx, rx);
1479
1480         return rc;
1481 }
1482
1483 static inline void bnx2x_set_rx_buf_size(struct bnx2x *bp)
1484 {
1485         int i;
1486
1487         for_each_queue(bp, i) {
1488                 struct bnx2x_fastpath *fp = &bp->fp[i];
1489
1490                 /* Always use a mini-jumbo MTU for the FCoE L2 ring */
1491                 if (IS_FCOE_IDX(i))
1492                         /*
1493                          * Although there are no IP frames expected to arrive to
1494                          * this ring we still want to add an
1495                          * IP_HEADER_ALIGNMENT_PADDING to prevent a buffer
1496                          * overrun attack.
1497                          */
1498                         fp->rx_buf_size =
1499                                 BNX2X_FCOE_MINI_JUMBO_MTU + ETH_OVREHEAD +
1500                                 BNX2X_FW_RX_ALIGN + IP_HEADER_ALIGNMENT_PADDING;
1501                 else
1502                         fp->rx_buf_size =
1503                                 bp->dev->mtu + ETH_OVREHEAD +
1504                                 BNX2X_FW_RX_ALIGN + IP_HEADER_ALIGNMENT_PADDING;
1505         }
1506 }
1507
1508 static inline int bnx2x_init_rss_pf(struct bnx2x *bp)
1509 {
1510         int i;
1511         u8 ind_table[T_ETH_INDIRECTION_TABLE_SIZE] = {0};
1512         u8 num_eth_queues = BNX2X_NUM_ETH_QUEUES(bp);
1513
1514         /*
1515          * Prepare the inital contents fo the indirection table if RSS is
1516          * enabled
1517          */
1518         if (bp->multi_mode != ETH_RSS_MODE_DISABLED) {
1519                 for (i = 0; i < sizeof(ind_table); i++)
1520                         ind_table[i] =
1521                                 bp->fp->cl_id + (i % num_eth_queues);
1522         }
1523
1524         /*
1525          * For 57710 and 57711 SEARCHER configuration (rss_keys) is
1526          * per-port, so if explicit configuration is needed , do it only
1527          * for a PMF.
1528          *
1529          * For 57712 and newer on the other hand it's a per-function
1530          * configuration.
1531          */
1532         return bnx2x_config_rss_pf(bp, ind_table,
1533                                    bp->port.pmf || !CHIP_IS_E1x(bp));
1534 }
1535
1536 int bnx2x_config_rss_pf(struct bnx2x *bp, u8 *ind_table, bool config_hash)
1537 {
1538         struct bnx2x_config_rss_params params = {0};
1539         int i;
1540
1541         /* Although RSS is meaningless when there is a single HW queue we
1542          * still need it enabled in order to have HW Rx hash generated.
1543          *
1544          * if (!is_eth_multi(bp))
1545          *      bp->multi_mode = ETH_RSS_MODE_DISABLED;
1546          */
1547
1548         params.rss_obj = &bp->rss_conf_obj;
1549
1550         __set_bit(RAMROD_COMP_WAIT, &params.ramrod_flags);
1551
1552         /* RSS mode */
1553         switch (bp->multi_mode) {
1554         case ETH_RSS_MODE_DISABLED:
1555                 __set_bit(BNX2X_RSS_MODE_DISABLED, &params.rss_flags);
1556                 break;
1557         case ETH_RSS_MODE_REGULAR:
1558                 __set_bit(BNX2X_RSS_MODE_REGULAR, &params.rss_flags);
1559                 break;
1560         case ETH_RSS_MODE_VLAN_PRI:
1561                 __set_bit(BNX2X_RSS_MODE_VLAN_PRI, &params.rss_flags);
1562                 break;
1563         case ETH_RSS_MODE_E1HOV_PRI:
1564                 __set_bit(BNX2X_RSS_MODE_E1HOV_PRI, &params.rss_flags);
1565                 break;
1566         case ETH_RSS_MODE_IP_DSCP:
1567                 __set_bit(BNX2X_RSS_MODE_IP_DSCP, &params.rss_flags);
1568                 break;
1569         default:
1570                 BNX2X_ERR("Unknown multi_mode: %d\n", bp->multi_mode);
1571                 return -EINVAL;
1572         }
1573
1574         /* If RSS is enabled */
1575         if (bp->multi_mode != ETH_RSS_MODE_DISABLED) {
1576                 /* RSS configuration */
1577                 __set_bit(BNX2X_RSS_IPV4, &params.rss_flags);
1578                 __set_bit(BNX2X_RSS_IPV4_TCP, &params.rss_flags);
1579                 __set_bit(BNX2X_RSS_IPV6, &params.rss_flags);
1580                 __set_bit(BNX2X_RSS_IPV6_TCP, &params.rss_flags);
1581
1582                 /* Hash bits */
1583                 params.rss_result_mask = MULTI_MASK;
1584
1585                 memcpy(params.ind_table, ind_table, sizeof(params.ind_table));
1586
1587                 if (config_hash) {
1588                         /* RSS keys */
1589                         for (i = 0; i < sizeof(params.rss_key) / 4; i++)
1590                                 params.rss_key[i] = random32();
1591
1592                         __set_bit(BNX2X_RSS_SET_SRCH, &params.rss_flags);
1593                 }
1594         }
1595
1596         return bnx2x_config_rss(bp, &params);
1597 }
1598
1599 static inline int bnx2x_init_hw(struct bnx2x *bp, u32 load_code)
1600 {
1601         struct bnx2x_func_state_params func_params = {0};
1602
1603         /* Prepare parameters for function state transitions */
1604         __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
1605
1606         func_params.f_obj = &bp->func_obj;
1607         func_params.cmd = BNX2X_F_CMD_HW_INIT;
1608
1609         func_params.params.hw_init.load_phase = load_code;
1610
1611         return bnx2x_func_state_change(bp, &func_params);
1612 }
1613
1614 /*
1615  * Cleans the object that have internal lists without sending
1616  * ramrods. Should be run when interrutps are disabled.
1617  */
1618 static void bnx2x_squeeze_objects(struct bnx2x *bp)
1619 {
1620         int rc;
1621         unsigned long ramrod_flags = 0, vlan_mac_flags = 0;
1622         struct bnx2x_mcast_ramrod_params rparam = {0};
1623         struct bnx2x_vlan_mac_obj *mac_obj = &bp->fp->mac_obj;
1624
1625         /***************** Cleanup MACs' object first *************************/
1626
1627         /* Wait for completion of requested */
1628         __set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
1629         /* Perform a dry cleanup */
1630         __set_bit(RAMROD_DRV_CLR_ONLY, &ramrod_flags);
1631
1632         /* Clean ETH primary MAC */
1633         __set_bit(BNX2X_ETH_MAC, &vlan_mac_flags);
1634         rc = mac_obj->delete_all(bp, &bp->fp->mac_obj, &vlan_mac_flags,
1635                                  &ramrod_flags);
1636         if (rc != 0)
1637                 BNX2X_ERR("Failed to clean ETH MACs: %d\n", rc);
1638
1639         /* Cleanup UC list */
1640         vlan_mac_flags = 0;
1641         __set_bit(BNX2X_UC_LIST_MAC, &vlan_mac_flags);
1642         rc = mac_obj->delete_all(bp, mac_obj, &vlan_mac_flags,
1643                                  &ramrod_flags);
1644         if (rc != 0)
1645                 BNX2X_ERR("Failed to clean UC list MACs: %d\n", rc);
1646
1647         /***************** Now clean mcast object *****************************/
1648         rparam.mcast_obj = &bp->mcast_obj;
1649         __set_bit(RAMROD_DRV_CLR_ONLY, &rparam.ramrod_flags);
1650
1651         /* Add a DEL command... */
1652         rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_DEL);
1653         if (rc < 0)
1654                 BNX2X_ERR("Failed to add a new DEL command to a multi-cast "
1655                           "object: %d\n", rc);
1656
1657         /* ...and wait until all pending commands are cleared */
1658         rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_CONT);
1659         while (rc != 0) {
1660                 if (rc < 0) {
1661                         BNX2X_ERR("Failed to clean multi-cast object: %d\n",
1662                                   rc);
1663                         return;
1664                 }
1665
1666                 rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_CONT);
1667         }
1668 }
1669
1670 #ifndef BNX2X_STOP_ON_ERROR
1671 #define LOAD_ERROR_EXIT(bp, label) \
1672         do { \
1673                 (bp)->state = BNX2X_STATE_ERROR; \
1674                 goto label; \
1675         } while (0)
1676 #else
1677 #define LOAD_ERROR_EXIT(bp, label) \
1678         do { \
1679                 (bp)->state = BNX2X_STATE_ERROR; \
1680                 (bp)->panic = 1; \
1681                 return -EBUSY; \
1682         } while (0)
1683 #endif
1684
1685 /* must be called with rtnl_lock */
1686 int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
1687 {
1688         int port = BP_PORT(bp);
1689         u32 load_code;
1690         int i, rc;
1691
1692 #ifdef BNX2X_STOP_ON_ERROR
1693         if (unlikely(bp->panic))
1694                 return -EPERM;
1695 #endif
1696
1697         bp->state = BNX2X_STATE_OPENING_WAIT4_LOAD;
1698
1699         /* Set the initial link reported state to link down */
1700         bnx2x_acquire_phy_lock(bp);
1701         memset(&bp->last_reported_link, 0, sizeof(bp->last_reported_link));
1702         __set_bit(BNX2X_LINK_REPORT_LINK_DOWN,
1703                 &bp->last_reported_link.link_report_flags);
1704         bnx2x_release_phy_lock(bp);
1705
1706         /* must be called before memory allocation and HW init */
1707         bnx2x_ilt_set_info(bp);
1708
1709         /*
1710          * Zero fastpath structures preserving invariants like napi, which are
1711          * allocated only once, fp index, max_cos, bp pointer.
1712          * Also set fp->disable_tpa.
1713          */
1714         for_each_queue(bp, i)
1715                 bnx2x_bz_fp(bp, i);
1716
1717
1718         /* Set the receive queues buffer size */
1719         bnx2x_set_rx_buf_size(bp);
1720
1721         if (bnx2x_alloc_mem(bp))
1722                 return -ENOMEM;
1723
1724         /* As long as bnx2x_alloc_mem() may possibly update
1725          * bp->num_queues, bnx2x_set_real_num_queues() should always
1726          * come after it.
1727          */
1728         rc = bnx2x_set_real_num_queues(bp);
1729         if (rc) {
1730                 BNX2X_ERR("Unable to set real_num_queues\n");
1731                 LOAD_ERROR_EXIT(bp, load_error0);
1732         }
1733
1734         /* configure multi cos mappings in kernel.
1735          * this configuration may be overriden by a multi class queue discipline
1736          * or by a dcbx negotiation result.
1737          */
1738         bnx2x_setup_tc(bp->dev, bp->max_cos);
1739
1740         bnx2x_napi_enable(bp);
1741
1742         /* Send LOAD_REQUEST command to MCP
1743          * Returns the type of LOAD command:
1744          * if it is the first port to be initialized
1745          * common blocks should be initialized, otherwise - not
1746          */
1747         if (!BP_NOMCP(bp)) {
1748                 load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ, 0);
1749                 if (!load_code) {
1750                         BNX2X_ERR("MCP response failure, aborting\n");
1751                         rc = -EBUSY;
1752                         LOAD_ERROR_EXIT(bp, load_error1);
1753                 }
1754                 if (load_code == FW_MSG_CODE_DRV_LOAD_REFUSED) {
1755                         rc = -EBUSY; /* other port in diagnostic mode */
1756                         LOAD_ERROR_EXIT(bp, load_error1);
1757                 }
1758
1759         } else {
1760                 int path = BP_PATH(bp);
1761
1762                 DP(NETIF_MSG_IFUP, "NO MCP - load counts[%d]      %d, %d, %d\n",
1763                    path, load_count[path][0], load_count[path][1],
1764                    load_count[path][2]);
1765                 load_count[path][0]++;
1766                 load_count[path][1 + port]++;
1767                 DP(NETIF_MSG_IFUP, "NO MCP - new load counts[%d]  %d, %d, %d\n",
1768                    path, load_count[path][0], load_count[path][1],
1769                    load_count[path][2]);
1770                 if (load_count[path][0] == 1)
1771                         load_code = FW_MSG_CODE_DRV_LOAD_COMMON;
1772                 else if (load_count[path][1 + port] == 1)
1773                         load_code = FW_MSG_CODE_DRV_LOAD_PORT;
1774                 else
1775                         load_code = FW_MSG_CODE_DRV_LOAD_FUNCTION;
1776         }
1777
1778         if ((load_code == FW_MSG_CODE_DRV_LOAD_COMMON) ||
1779             (load_code == FW_MSG_CODE_DRV_LOAD_COMMON_CHIP) ||
1780             (load_code == FW_MSG_CODE_DRV_LOAD_PORT)) {
1781                 bp->port.pmf = 1;
1782                 /*
1783                  * We need the barrier to ensure the ordering between the
1784                  * writing to bp->port.pmf here and reading it from the
1785                  * bnx2x_periodic_task().
1786                  */
1787                 smp_mb();
1788                 queue_delayed_work(bnx2x_wq, &bp->period_task, 0);
1789         } else
1790                 bp->port.pmf = 0;
1791
1792         DP(NETIF_MSG_LINK, "pmf %d\n", bp->port.pmf);
1793
1794         /* Init Function state controlling object */
1795         bnx2x__init_func_obj(bp);
1796
1797         /* Initialize HW */
1798         rc = bnx2x_init_hw(bp, load_code);
1799         if (rc) {
1800                 BNX2X_ERR("HW init failed, aborting\n");
1801                 bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0);
1802                 LOAD_ERROR_EXIT(bp, load_error2);
1803         }
1804
1805         /* Connect to IRQs */
1806         rc = bnx2x_setup_irqs(bp);
1807         if (rc) {
1808                 bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0);
1809                 LOAD_ERROR_EXIT(bp, load_error2);
1810         }
1811
1812         /* Setup NIC internals and enable interrupts */
1813         bnx2x_nic_init(bp, load_code);
1814
1815         /* Init per-function objects */
1816         bnx2x_init_bp_objs(bp);
1817
1818         if (((load_code == FW_MSG_CODE_DRV_LOAD_COMMON) ||
1819             (load_code == FW_MSG_CODE_DRV_LOAD_COMMON_CHIP)) &&
1820             (bp->common.shmem2_base)) {
1821                 if (SHMEM2_HAS(bp, dcc_support))
1822                         SHMEM2_WR(bp, dcc_support,
1823                                   (SHMEM_DCC_SUPPORT_DISABLE_ENABLE_PF_TLV |
1824                                    SHMEM_DCC_SUPPORT_BANDWIDTH_ALLOCATION_TLV));
1825         }
1826
1827         bp->state = BNX2X_STATE_OPENING_WAIT4_PORT;
1828         rc = bnx2x_func_start(bp);
1829         if (rc) {
1830                 BNX2X_ERR("Function start failed!\n");
1831                 bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0);
1832                 LOAD_ERROR_EXIT(bp, load_error3);
1833         }
1834
1835         /* Send LOAD_DONE command to MCP */
1836         if (!BP_NOMCP(bp)) {
1837                 load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0);
1838                 if (!load_code) {
1839                         BNX2X_ERR("MCP response failure, aborting\n");
1840                         rc = -EBUSY;
1841                         LOAD_ERROR_EXIT(bp, load_error3);
1842                 }
1843         }
1844
1845         rc = bnx2x_setup_leading(bp);
1846         if (rc) {
1847                 BNX2X_ERR("Setup leading failed!\n");
1848                 LOAD_ERROR_EXIT(bp, load_error3);
1849         }
1850
1851 #ifdef BCM_CNIC
1852         /* Enable Timer scan */
1853         REG_WR(bp, TM_REG_EN_LINEAR0_TIMER + port*4, 1);
1854 #endif
1855
1856         for_each_nondefault_queue(bp, i) {
1857                 rc = bnx2x_setup_queue(bp, &bp->fp[i], 0);
1858                 if (rc)
1859                         LOAD_ERROR_EXIT(bp, load_error4);
1860         }
1861
1862         rc = bnx2x_init_rss_pf(bp);
1863         if (rc)
1864                 LOAD_ERROR_EXIT(bp, load_error4);
1865
1866         /* Now when Clients are configured we are ready to work */
1867         bp->state = BNX2X_STATE_OPEN;
1868
1869         /* Configure a ucast MAC */
1870         rc = bnx2x_set_eth_mac(bp, true);
1871         if (rc)
1872                 LOAD_ERROR_EXIT(bp, load_error4);
1873
1874         if (bp->pending_max) {
1875                 bnx2x_update_max_mf_config(bp, bp->pending_max);
1876                 bp->pending_max = 0;
1877         }
1878
1879         if (bp->port.pmf)
1880                 bnx2x_initial_phy_init(bp, load_mode);
1881
1882         /* Start fast path */
1883
1884         /* Initialize Rx filter. */
1885         netif_addr_lock_bh(bp->dev);
1886         bnx2x_set_rx_mode(bp->dev);
1887         netif_addr_unlock_bh(bp->dev);
1888
1889         /* Start the Tx */
1890         switch (load_mode) {
1891         case LOAD_NORMAL:
1892                 /* Tx queue should be only reenabled */
1893                 netif_tx_wake_all_queues(bp->dev);
1894                 break;
1895
1896         case LOAD_OPEN:
1897                 netif_tx_start_all_queues(bp->dev);
1898                 smp_mb__after_clear_bit();
1899                 break;
1900
1901         case LOAD_DIAG:
1902                 bp->state = BNX2X_STATE_DIAG;
1903                 break;
1904
1905         default:
1906                 break;
1907         }
1908
1909         if (!bp->port.pmf)
1910                 bnx2x__link_status_update(bp);
1911
1912         /* start the timer */
1913         mod_timer(&bp->timer, jiffies + bp->current_interval);
1914
1915 #ifdef BCM_CNIC
1916         bnx2x_setup_cnic_irq_info(bp);
1917         if (bp->state == BNX2X_STATE_OPEN)
1918                 bnx2x_cnic_notify(bp, CNIC_CTL_START_CMD);
1919 #endif
1920         bnx2x_inc_load_cnt(bp);
1921
1922         /* Wait for all pending SP commands to complete */
1923         if (!bnx2x_wait_sp_comp(bp, ~0x0UL)) {
1924                 BNX2X_ERR("Timeout waiting for SP elements to complete\n");
1925                 bnx2x_nic_unload(bp, UNLOAD_CLOSE);
1926                 return -EBUSY;
1927         }
1928
1929         bnx2x_dcbx_init(bp);
1930         return 0;
1931
1932 #ifndef BNX2X_STOP_ON_ERROR
1933 load_error4:
1934 #ifdef BCM_CNIC
1935         /* Disable Timer scan */
1936         REG_WR(bp, TM_REG_EN_LINEAR0_TIMER + port*4, 0);
1937 #endif
1938 load_error3:
1939         bnx2x_int_disable_sync(bp, 1);
1940
1941         /* Clean queueable objects */
1942         bnx2x_squeeze_objects(bp);
1943
1944         /* Free SKBs, SGEs, TPA pool and driver internals */
1945         bnx2x_free_skbs(bp);
1946         for_each_rx_queue(bp, i)
1947                 bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
1948
1949         /* Release IRQs */
1950         bnx2x_free_irq(bp);
1951 load_error2:
1952         if (!BP_NOMCP(bp)) {
1953                 bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP, 0);
1954                 bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE, 0);
1955         }
1956
1957         bp->port.pmf = 0;
1958 load_error1:
1959         bnx2x_napi_disable(bp);
1960 load_error0:
1961         bnx2x_free_mem(bp);
1962
1963         return rc;
1964 #endif /* ! BNX2X_STOP_ON_ERROR */
1965 }
1966
1967 /* must be called with rtnl_lock */
1968 int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode)
1969 {
1970         int i;
1971         bool global = false;
1972
1973         if ((bp->state == BNX2X_STATE_CLOSED) ||
1974             (bp->state == BNX2X_STATE_ERROR)) {
1975                 /* We can get here if the driver has been unloaded
1976                  * during parity error recovery and is either waiting for a
1977                  * leader to complete or for other functions to unload and
1978                  * then ifdown has been issued. In this case we want to
1979                  * unload and let other functions to complete a recovery
1980                  * process.
1981                  */
1982                 bp->recovery_state = BNX2X_RECOVERY_DONE;
1983                 bp->is_leader = 0;
1984                 bnx2x_release_leader_lock(bp);
1985                 smp_mb();
1986
1987                 DP(NETIF_MSG_HW, "Releasing a leadership...\n");
1988
1989                 return -EINVAL;
1990         }
1991
1992         /* Stop Tx */
1993         bnx2x_tx_disable(bp);
1994
1995 #ifdef BCM_CNIC
1996         bnx2x_cnic_notify(bp, CNIC_CTL_STOP_CMD);
1997 #endif
1998         bp->state = BNX2X_STATE_CLOSING_WAIT4_HALT;
1999         smp_mb();
2000
2001         bp->rx_mode = BNX2X_RX_MODE_NONE;
2002
2003         del_timer_sync(&bp->timer);
2004
2005         /* Set ALWAYS_ALIVE bit in shmem */
2006         bp->fw_drv_pulse_wr_seq |= DRV_PULSE_ALWAYS_ALIVE;
2007
2008         bnx2x_drv_pulse(bp);
2009
2010         bnx2x_stats_handle(bp, STATS_EVENT_STOP);
2011
2012         /* Cleanup the chip if needed */
2013         if (unload_mode != UNLOAD_RECOVERY)
2014                 bnx2x_chip_cleanup(bp, unload_mode);
2015         else {
2016                 /* Send the UNLOAD_REQUEST to the MCP */
2017                 bnx2x_send_unload_req(bp, unload_mode);
2018
2019                 /*
2020                  * Prevent transactions to host from the functions on the
2021                  * engine that doesn't reset global blocks in case of global
2022                  * attention once gloabl blocks are reset and gates are opened
2023                  * (the engine which leader will perform the recovery
2024                  * last).
2025                  */
2026                 if (!CHIP_IS_E1x(bp))
2027                         bnx2x_pf_disable(bp);
2028
2029                 /* Disable HW interrupts, NAPI */
2030                 bnx2x_netif_stop(bp, 1);
2031
2032                 /* Release IRQs */
2033                 bnx2x_free_irq(bp);
2034
2035                 /* Report UNLOAD_DONE to MCP */
2036                 bnx2x_send_unload_done(bp);
2037         }
2038
2039         /*
2040          * At this stage no more interrupts will arrive so we may safly clean
2041          * the queueable objects here in case they failed to get cleaned so far.
2042          */
2043         bnx2x_squeeze_objects(bp);
2044
2045         bp->port.pmf = 0;
2046
2047         /* Free SKBs, SGEs, TPA pool and driver internals */
2048         bnx2x_free_skbs(bp);
2049         for_each_rx_queue(bp, i)
2050                 bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
2051
2052         bnx2x_free_mem(bp);
2053
2054         bp->state = BNX2X_STATE_CLOSED;
2055
2056         /* Check if there are pending parity attentions. If there are - set
2057          * RECOVERY_IN_PROGRESS.
2058          */
2059         if (bnx2x_chk_parity_attn(bp, &global, false)) {
2060                 bnx2x_set_reset_in_progress(bp);
2061
2062                 /* Set RESET_IS_GLOBAL if needed */
2063                 if (global)
2064                         bnx2x_set_reset_global(bp);
2065         }
2066
2067
2068         /* The last driver must disable a "close the gate" if there is no
2069          * parity attention or "process kill" pending.
2070          */
2071         if (!bnx2x_dec_load_cnt(bp) && bnx2x_reset_is_done(bp, BP_PATH(bp)))
2072                 bnx2x_disable_close_the_gate(bp);
2073
2074         return 0;
2075 }
2076
2077 int bnx2x_set_power_state(struct bnx2x *bp, pci_power_t state)
2078 {
2079         u16 pmcsr;
2080
2081         /* If there is no power capability, silently succeed */
2082         if (!bp->pm_cap) {
2083                 DP(NETIF_MSG_HW, "No power capability. Breaking.\n");
2084                 return 0;
2085         }
2086
2087         pci_read_config_word(bp->pdev, bp->pm_cap + PCI_PM_CTRL, &pmcsr);
2088
2089         switch (state) {
2090         case PCI_D0:
2091                 pci_write_config_word(bp->pdev, bp->pm_cap + PCI_PM_CTRL,
2092                                       ((pmcsr & ~PCI_PM_CTRL_STATE_MASK) |
2093                                        PCI_PM_CTRL_PME_STATUS));
2094
2095                 if (pmcsr & PCI_PM_CTRL_STATE_MASK)
2096                         /* delay required during transition out of D3hot */
2097                         msleep(20);
2098                 break;
2099
2100         case PCI_D3hot:
2101                 /* If there are other clients above don't
2102                    shut down the power */
2103                 if (atomic_read(&bp->pdev->enable_cnt) != 1)
2104                         return 0;
2105                 /* Don't shut down the power for emulation and FPGA */
2106                 if (CHIP_REV_IS_SLOW(bp))
2107                         return 0;
2108
2109                 pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
2110                 pmcsr |= 3;
2111
2112                 if (bp->wol)
2113                         pmcsr |= PCI_PM_CTRL_PME_ENABLE;
2114
2115                 pci_write_config_word(bp->pdev, bp->pm_cap + PCI_PM_CTRL,
2116                                       pmcsr);
2117
2118                 /* No more memory access after this point until
2119                 * device is brought back to D0.
2120                 */
2121                 break;
2122
2123         default:
2124                 return -EINVAL;
2125         }
2126         return 0;
2127 }
2128
2129 /*
2130  * net_device service functions
2131  */
2132 int bnx2x_poll(struct napi_struct *napi, int budget)
2133 {
2134         int work_done = 0;
2135         u8 cos;
2136         struct bnx2x_fastpath *fp = container_of(napi, struct bnx2x_fastpath,
2137                                                  napi);
2138         struct bnx2x *bp = fp->bp;
2139
2140         while (1) {
2141 #ifdef BNX2X_STOP_ON_ERROR
2142                 if (unlikely(bp->panic)) {
2143                         napi_complete(napi);
2144                         return 0;
2145                 }
2146 #endif
2147
2148                 for_each_cos_in_tx_queue(fp, cos)
2149                         if (bnx2x_tx_queue_has_work(&fp->txdata[cos]))
2150                                 bnx2x_tx_int(bp, &fp->txdata[cos]);
2151
2152
2153                 if (bnx2x_has_rx_work(fp)) {
2154                         work_done += bnx2x_rx_int(fp, budget - work_done);
2155
2156                         /* must not complete if we consumed full budget */
2157                         if (work_done >= budget)
2158                                 break;
2159                 }
2160
2161                 /* Fall out from the NAPI loop if needed */
2162                 if (!(bnx2x_has_rx_work(fp) || bnx2x_has_tx_work(fp))) {
2163 #ifdef BCM_CNIC
2164                         /* No need to update SB for FCoE L2 ring as long as
2165                          * it's connected to the default SB and the SB
2166                          * has been updated when NAPI was scheduled.
2167                          */
2168                         if (IS_FCOE_FP(fp)) {
2169                                 napi_complete(napi);
2170                                 break;
2171                         }
2172 #endif
2173
2174                         bnx2x_update_fpsb_idx(fp);
2175                         /* bnx2x_has_rx_work() reads the status block,
2176                          * thus we need to ensure that status block indices
2177                          * have been actually read (bnx2x_update_fpsb_idx)
2178                          * prior to this check (bnx2x_has_rx_work) so that
2179                          * we won't write the "newer" value of the status block
2180                          * to IGU (if there was a DMA right after
2181                          * bnx2x_has_rx_work and if there is no rmb, the memory
2182                          * reading (bnx2x_update_fpsb_idx) may be postponed
2183                          * to right before bnx2x_ack_sb). In this case there
2184                          * will never be another interrupt until there is
2185                          * another update of the status block, while there
2186                          * is still unhandled work.
2187                          */
2188                         rmb();
2189
2190                         if (!(bnx2x_has_rx_work(fp) || bnx2x_has_tx_work(fp))) {
2191                                 napi_complete(napi);
2192                                 /* Re-enable interrupts */
2193                                 DP(NETIF_MSG_HW,
2194                                    "Update index to %d\n", fp->fp_hc_idx);
2195                                 bnx2x_ack_sb(bp, fp->igu_sb_id, USTORM_ID,
2196                                              le16_to_cpu(fp->fp_hc_idx),
2197                                              IGU_INT_ENABLE, 1);
2198                                 break;
2199                         }
2200                 }
2201         }
2202
2203         return work_done;
2204 }
2205
2206 /* we split the first BD into headers and data BDs
2207  * to ease the pain of our fellow microcode engineers
2208  * we use one mapping for both BDs
2209  * So far this has only been observed to happen
2210  * in Other Operating Systems(TM)
2211  */
2212 static noinline u16 bnx2x_tx_split(struct bnx2x *bp,
2213                                    struct bnx2x_fp_txdata *txdata,
2214                                    struct sw_tx_bd *tx_buf,
2215                                    struct eth_tx_start_bd **tx_bd, u16 hlen,
2216                                    u16 bd_prod, int nbd)
2217 {
2218         struct eth_tx_start_bd *h_tx_bd = *tx_bd;
2219         struct eth_tx_bd *d_tx_bd;
2220         dma_addr_t mapping;
2221         int old_len = le16_to_cpu(h_tx_bd->nbytes);
2222
2223         /* first fix first BD */
2224         h_tx_bd->nbd = cpu_to_le16(nbd);
2225         h_tx_bd->nbytes = cpu_to_le16(hlen);
2226
2227         DP(NETIF_MSG_TX_QUEUED, "TSO split header size is %d "
2228            "(%x:%x) nbd %d\n", h_tx_bd->nbytes, h_tx_bd->addr_hi,
2229            h_tx_bd->addr_lo, h_tx_bd->nbd);
2230
2231         /* now get a new data BD
2232          * (after the pbd) and fill it */
2233         bd_prod = TX_BD(NEXT_TX_IDX(bd_prod));
2234         d_tx_bd = &txdata->tx_desc_ring[bd_prod].reg_bd;
2235
2236         mapping = HILO_U64(le32_to_cpu(h_tx_bd->addr_hi),
2237                            le32_to_cpu(h_tx_bd->addr_lo)) + hlen;
2238
2239         d_tx_bd->addr_hi = cpu_to_le32(U64_HI(mapping));
2240         d_tx_bd->addr_lo = cpu_to_le32(U64_LO(mapping));
2241         d_tx_bd->nbytes = cpu_to_le16(old_len - hlen);
2242
2243         /* this marks the BD as one that has no individual mapping */
2244         tx_buf->flags |= BNX2X_TSO_SPLIT_BD;
2245
2246         DP(NETIF_MSG_TX_QUEUED,
2247            "TSO split data size is %d (%x:%x)\n",
2248            d_tx_bd->nbytes, d_tx_bd->addr_hi, d_tx_bd->addr_lo);
2249
2250         /* update tx_bd */
2251         *tx_bd = (struct eth_tx_start_bd *)d_tx_bd;
2252
2253         return bd_prod;
2254 }
2255
2256 static inline u16 bnx2x_csum_fix(unsigned char *t_header, u16 csum, s8 fix)
2257 {
2258         if (fix > 0)
2259                 csum = (u16) ~csum_fold(csum_sub(csum,
2260                                 csum_partial(t_header - fix, fix, 0)));
2261
2262         else if (fix < 0)
2263                 csum = (u16) ~csum_fold(csum_add(csum,
2264                                 csum_partial(t_header, -fix, 0)));
2265
2266         return swab16(csum);
2267 }
2268
2269 static inline u32 bnx2x_xmit_type(struct bnx2x *bp, struct sk_buff *skb)
2270 {
2271         u32 rc;
2272
2273         if (skb->ip_summed != CHECKSUM_PARTIAL)
2274                 rc = XMIT_PLAIN;
2275
2276         else {
2277                 if (vlan_get_protocol(skb) == htons(ETH_P_IPV6)) {
2278                         rc = XMIT_CSUM_V6;
2279                         if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
2280                                 rc |= XMIT_CSUM_TCP;
2281
2282                 } else {
2283                         rc = XMIT_CSUM_V4;
2284                         if (ip_hdr(skb)->protocol == IPPROTO_TCP)
2285                                 rc |= XMIT_CSUM_TCP;
2286                 }
2287         }
2288
2289         if (skb_is_gso_v6(skb))
2290                 rc |= XMIT_GSO_V6 | XMIT_CSUM_TCP | XMIT_CSUM_V6;
2291         else if (skb_is_gso(skb))
2292                 rc |= XMIT_GSO_V4 | XMIT_CSUM_V4 | XMIT_CSUM_TCP;
2293
2294         return rc;
2295 }
2296
2297 #if (MAX_SKB_FRAGS >= MAX_FETCH_BD - 3)
2298 /* check if packet requires linearization (packet is too fragmented)
2299    no need to check fragmentation if page size > 8K (there will be no
2300    violation to FW restrictions) */
2301 static int bnx2x_pkt_req_lin(struct bnx2x *bp, struct sk_buff *skb,
2302                              u32 xmit_type)
2303 {
2304         int to_copy = 0;
2305         int hlen = 0;
2306         int first_bd_sz = 0;
2307
2308         /* 3 = 1 (for linear data BD) + 2 (for PBD and last BD) */
2309         if (skb_shinfo(skb)->nr_frags >= (MAX_FETCH_BD - 3)) {
2310
2311                 if (xmit_type & XMIT_GSO) {
2312                         unsigned short lso_mss = skb_shinfo(skb)->gso_size;
2313                         /* Check if LSO packet needs to be copied:
2314                            3 = 1 (for headers BD) + 2 (for PBD and last BD) */
2315                         int wnd_size = MAX_FETCH_BD - 3;
2316                         /* Number of windows to check */
2317                         int num_wnds = skb_shinfo(skb)->nr_frags - wnd_size;
2318                         int wnd_idx = 0;
2319                         int frag_idx = 0;
2320                         u32 wnd_sum = 0;
2321
2322                         /* Headers length */
2323                         hlen = (int)(skb_transport_header(skb) - skb->data) +
2324                                 tcp_hdrlen(skb);
2325
2326                         /* Amount of data (w/o headers) on linear part of SKB*/
2327                         first_bd_sz = skb_headlen(skb) - hlen;
2328
2329                         wnd_sum  = first_bd_sz;
2330
2331                         /* Calculate the first sum - it's special */
2332                         for (frag_idx = 0; frag_idx < wnd_size - 1; frag_idx++)
2333                                 wnd_sum +=
2334                                         skb_shinfo(skb)->frags[frag_idx].size;
2335
2336                         /* If there was data on linear skb data - check it */
2337                         if (first_bd_sz > 0) {
2338                                 if (unlikely(wnd_sum < lso_mss)) {
2339                                         to_copy = 1;
2340                                         goto exit_lbl;
2341                                 }
2342
2343                                 wnd_sum -= first_bd_sz;
2344                         }
2345
2346                         /* Others are easier: run through the frag list and
2347                            check all windows */
2348                         for (wnd_idx = 0; wnd_idx <= num_wnds; wnd_idx++) {
2349                                 wnd_sum +=
2350                           skb_shinfo(skb)->frags[wnd_idx + wnd_size - 1].size;
2351
2352                                 if (unlikely(wnd_sum < lso_mss)) {
2353                                         to_copy = 1;
2354                                         break;
2355                                 }
2356                                 wnd_sum -=
2357                                         skb_shinfo(skb)->frags[wnd_idx].size;
2358                         }
2359                 } else {
2360                         /* in non-LSO too fragmented packet should always
2361                            be linearized */
2362                         to_copy = 1;
2363                 }
2364         }
2365
2366 exit_lbl:
2367         if (unlikely(to_copy))
2368                 DP(NETIF_MSG_TX_QUEUED,
2369                    "Linearization IS REQUIRED for %s packet. "
2370                    "num_frags %d  hlen %d  first_bd_sz %d\n",
2371                    (xmit_type & XMIT_GSO) ? "LSO" : "non-LSO",
2372                    skb_shinfo(skb)->nr_frags, hlen, first_bd_sz);
2373
2374         return to_copy;
2375 }
2376 #endif
2377
2378 static inline void bnx2x_set_pbd_gso_e2(struct sk_buff *skb, u32 *parsing_data,
2379                                         u32 xmit_type)
2380 {
2381         *parsing_data |= (skb_shinfo(skb)->gso_size <<
2382                               ETH_TX_PARSE_BD_E2_LSO_MSS_SHIFT) &
2383                               ETH_TX_PARSE_BD_E2_LSO_MSS;
2384         if ((xmit_type & XMIT_GSO_V6) &&
2385             (ipv6_hdr(skb)->nexthdr == NEXTHDR_IPV6))
2386                 *parsing_data |= ETH_TX_PARSE_BD_E2_IPV6_WITH_EXT_HDR;
2387 }
2388
2389 /**
2390  * bnx2x_set_pbd_gso - update PBD in GSO case.
2391  *
2392  * @skb:        packet skb
2393  * @pbd:        parse BD
2394  * @xmit_type:  xmit flags
2395  */
2396 static inline void bnx2x_set_pbd_gso(struct sk_buff *skb,
2397                                      struct eth_tx_parse_bd_e1x *pbd,
2398                                      u32 xmit_type)
2399 {
2400         pbd->lso_mss = cpu_to_le16(skb_shinfo(skb)->gso_size);
2401         pbd->tcp_send_seq = swab32(tcp_hdr(skb)->seq);
2402         pbd->tcp_flags = pbd_tcp_flags(skb);
2403
2404         if (xmit_type & XMIT_GSO_V4) {
2405                 pbd->ip_id = swab16(ip_hdr(skb)->id);
2406                 pbd->tcp_pseudo_csum =
2407                         swab16(~csum_tcpudp_magic(ip_hdr(skb)->saddr,
2408                                                   ip_hdr(skb)->daddr,
2409                                                   0, IPPROTO_TCP, 0));
2410
2411         } else
2412                 pbd->tcp_pseudo_csum =
2413                         swab16(~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
2414                                                 &ipv6_hdr(skb)->daddr,
2415                                                 0, IPPROTO_TCP, 0));
2416
2417         pbd->global_data |= ETH_TX_PARSE_BD_E1X_PSEUDO_CS_WITHOUT_LEN;
2418 }
2419
2420 /**
2421  * bnx2x_set_pbd_csum_e2 - update PBD with checksum and return header length
2422  *
2423  * @bp:                 driver handle
2424  * @skb:                packet skb
2425  * @parsing_data:       data to be updated
2426  * @xmit_type:          xmit flags
2427  *
2428  * 57712 related
2429  */
2430 static inline  u8 bnx2x_set_pbd_csum_e2(struct bnx2x *bp, struct sk_buff *skb,
2431         u32 *parsing_data, u32 xmit_type)
2432 {
2433         *parsing_data |=
2434                         ((((u8 *)skb_transport_header(skb) - skb->data) >> 1) <<
2435                         ETH_TX_PARSE_BD_E2_TCP_HDR_START_OFFSET_W_SHIFT) &
2436                         ETH_TX_PARSE_BD_E2_TCP_HDR_START_OFFSET_W;
2437
2438         if (xmit_type & XMIT_CSUM_TCP) {
2439                 *parsing_data |= ((tcp_hdrlen(skb) / 4) <<
2440                         ETH_TX_PARSE_BD_E2_TCP_HDR_LENGTH_DW_SHIFT) &
2441                         ETH_TX_PARSE_BD_E2_TCP_HDR_LENGTH_DW;
2442
2443                 return skb_transport_header(skb) + tcp_hdrlen(skb) - skb->data;
2444         } else
2445                 /* We support checksum offload for TCP and UDP only.
2446                  * No need to pass the UDP header length - it's a constant.
2447                  */
2448                 return skb_transport_header(skb) +
2449                                 sizeof(struct udphdr) - skb->data;
2450 }
2451
2452 static inline void bnx2x_set_sbd_csum(struct bnx2x *bp, struct sk_buff *skb,
2453         struct eth_tx_start_bd *tx_start_bd, u32 xmit_type)
2454 {
2455         tx_start_bd->bd_flags.as_bitfield |= ETH_TX_BD_FLAGS_L4_CSUM;
2456
2457         if (xmit_type & XMIT_CSUM_V4)
2458                 tx_start_bd->bd_flags.as_bitfield |=
2459                                         ETH_TX_BD_FLAGS_IP_CSUM;
2460         else
2461                 tx_start_bd->bd_flags.as_bitfield |=
2462                                         ETH_TX_BD_FLAGS_IPV6;
2463
2464         if (!(xmit_type & XMIT_CSUM_TCP))
2465                 tx_start_bd->bd_flags.as_bitfield |= ETH_TX_BD_FLAGS_IS_UDP;
2466 }
2467
2468 /**
2469  * bnx2x_set_pbd_csum - update PBD with checksum and return header length
2470  *
2471  * @bp:         driver handle
2472  * @skb:        packet skb
2473  * @pbd:        parse BD to be updated
2474  * @xmit_type:  xmit flags
2475  */
2476 static inline u8 bnx2x_set_pbd_csum(struct bnx2x *bp, struct sk_buff *skb,
2477         struct eth_tx_parse_bd_e1x *pbd,
2478         u32 xmit_type)
2479 {
2480         u8 hlen = (skb_network_header(skb) - skb->data) >> 1;
2481
2482         /* for now NS flag is not used in Linux */
2483         pbd->global_data =
2484                 (hlen | ((skb->protocol == cpu_to_be16(ETH_P_8021Q)) <<
2485                          ETH_TX_PARSE_BD_E1X_LLC_SNAP_EN_SHIFT));
2486
2487         pbd->ip_hlen_w = (skb_transport_header(skb) -
2488                         skb_network_header(skb)) >> 1;
2489
2490         hlen += pbd->ip_hlen_w;
2491
2492         /* We support checksum offload for TCP and UDP only */
2493         if (xmit_type & XMIT_CSUM_TCP)
2494                 hlen += tcp_hdrlen(skb) / 2;
2495         else
2496                 hlen += sizeof(struct udphdr) / 2;
2497
2498         pbd->total_hlen_w = cpu_to_le16(hlen);
2499         hlen = hlen*2;
2500
2501         if (xmit_type & XMIT_CSUM_TCP) {
2502                 pbd->tcp_pseudo_csum = swab16(tcp_hdr(skb)->check);
2503
2504         } else {
2505                 s8 fix = SKB_CS_OFF(skb); /* signed! */
2506
2507                 DP(NETIF_MSG_TX_QUEUED,
2508                    "hlen %d  fix %d  csum before fix %x\n",
2509                    le16_to_cpu(pbd->total_hlen_w), fix, SKB_CS(skb));
2510
2511                 /* HW bug: fixup the CSUM */
2512                 pbd->tcp_pseudo_csum =
2513                         bnx2x_csum_fix(skb_transport_header(skb),
2514                                        SKB_CS(skb), fix);
2515
2516                 DP(NETIF_MSG_TX_QUEUED, "csum after fix %x\n",
2517                    pbd->tcp_pseudo_csum);
2518         }
2519
2520         return hlen;
2521 }
2522
2523 /* called with netif_tx_lock
2524  * bnx2x_tx_int() runs without netif_tx_lock unless it needs to call
2525  * netif_wake_queue()
2526  */
2527 netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
2528 {
2529         struct bnx2x *bp = netdev_priv(dev);
2530
2531         struct bnx2x_fastpath *fp;
2532         struct netdev_queue *txq;
2533         struct bnx2x_fp_txdata *txdata;
2534         struct sw_tx_bd *tx_buf;
2535         struct eth_tx_start_bd *tx_start_bd, *first_bd;
2536         struct eth_tx_bd *tx_data_bd, *total_pkt_bd = NULL;
2537         struct eth_tx_parse_bd_e1x *pbd_e1x = NULL;
2538         struct eth_tx_parse_bd_e2 *pbd_e2 = NULL;
2539         u32 pbd_e2_parsing_data = 0;
2540         u16 pkt_prod, bd_prod;
2541         int nbd, txq_index, fp_index, txdata_index;
2542         dma_addr_t mapping;
2543         u32 xmit_type = bnx2x_xmit_type(bp, skb);
2544         int i;
2545         u8 hlen = 0;
2546         __le16 pkt_size = 0;
2547         struct ethhdr *eth;
2548         u8 mac_type = UNICAST_ADDRESS;
2549
2550 #ifdef BNX2X_STOP_ON_ERROR
2551         if (unlikely(bp->panic))
2552                 return NETDEV_TX_BUSY;
2553 #endif
2554
2555         txq_index = skb_get_queue_mapping(skb);
2556         txq = netdev_get_tx_queue(dev, txq_index);
2557
2558         BUG_ON(txq_index >= MAX_ETH_TXQ_IDX(bp) + FCOE_PRESENT);
2559
2560         /* decode the fastpath index and the cos index from the txq */
2561         fp_index = TXQ_TO_FP(txq_index);
2562         txdata_index = TXQ_TO_COS(txq_index);
2563
2564 #ifdef BCM_CNIC
2565         /*
2566          * Override the above for the FCoE queue:
2567          *   - FCoE fp entry is right after the ETH entries.
2568          *   - FCoE L2 queue uses bp->txdata[0] only.
2569          */
2570         if (unlikely(!NO_FCOE(bp) && (txq_index ==
2571                                       bnx2x_fcoe_tx(bp, txq_index)))) {
2572                 fp_index = FCOE_IDX;
2573                 txdata_index = 0;
2574         }
2575 #endif
2576
2577         /* enable this debug print to view the transmission queue being used
2578         DP(BNX2X_MSG_FP, "indices: txq %d, fp %d, txdata %d",
2579            txq_index, fp_index, txdata_index); */
2580
2581         /* locate the fastpath and the txdata */
2582         fp = &bp->fp[fp_index];
2583         txdata = &fp->txdata[txdata_index];
2584
2585         /* enable this debug print to view the tranmission details
2586         DP(BNX2X_MSG_FP,"transmitting packet cid %d fp index %d txdata_index %d"
2587                         " tx_data ptr %p fp pointer %p",
2588            txdata->cid, fp_index, txdata_index, txdata, fp); */
2589
2590         if (unlikely(bnx2x_tx_avail(bp, txdata) <
2591                      (skb_shinfo(skb)->nr_frags + 3))) {
2592                 fp->eth_q_stats.driver_xoff++;
2593                 netif_tx_stop_queue(txq);
2594                 BNX2X_ERR("BUG! Tx ring full when queue awake!\n");
2595                 return NETDEV_TX_BUSY;
2596         }
2597
2598         DP(NETIF_MSG_TX_QUEUED, "queue[%d]: SKB: summed %x  protocol %x  "
2599                                 "protocol(%x,%x) gso type %x  xmit_type %x\n",
2600            txq_index, skb->ip_summed, skb->protocol, ipv6_hdr(skb)->nexthdr,
2601            ip_hdr(skb)->protocol, skb_shinfo(skb)->gso_type, xmit_type);
2602
2603         eth = (struct ethhdr *)skb->data;
2604
2605         /* set flag according to packet type (UNICAST_ADDRESS is default)*/
2606         if (unlikely(is_multicast_ether_addr(eth->h_dest))) {
2607                 if (is_broadcast_ether_addr(eth->h_dest))
2608                         mac_type = BROADCAST_ADDRESS;
2609                 else
2610                         mac_type = MULTICAST_ADDRESS;
2611         }
2612
2613 #if (MAX_SKB_FRAGS >= MAX_FETCH_BD - 3)
2614         /* First, check if we need to linearize the skb (due to FW
2615            restrictions). No need to check fragmentation if page size > 8K
2616            (there will be no violation to FW restrictions) */
2617         if (bnx2x_pkt_req_lin(bp, skb, xmit_type)) {
2618                 /* Statistics of linearization */
2619                 bp->lin_cnt++;
2620                 if (skb_linearize(skb) != 0) {
2621                         DP(NETIF_MSG_TX_QUEUED, "SKB linearization failed - "
2622                            "silently dropping this SKB\n");
2623                         dev_kfree_skb_any(skb);
2624                         return NETDEV_TX_OK;
2625                 }
2626         }
2627 #endif
2628         /* Map skb linear data for DMA */
2629         mapping = dma_map_single(&bp->pdev->dev, skb->data,
2630                                  skb_headlen(skb), DMA_TO_DEVICE);
2631         if (unlikely(dma_mapping_error(&bp->pdev->dev, mapping))) {
2632                 DP(NETIF_MSG_TX_QUEUED, "SKB mapping failed - "
2633                    "silently dropping this SKB\n");
2634                 dev_kfree_skb_any(skb);
2635                 return NETDEV_TX_OK;
2636         }
2637         /*
2638         Please read carefully. First we use one BD which we mark as start,
2639         then we have a parsing info BD (used for TSO or xsum),
2640         and only then we have the rest of the TSO BDs.
2641         (don't forget to mark the last one as last,
2642         and to unmap only AFTER you write to the BD ...)
2643         And above all, all pdb sizes are in words - NOT DWORDS!
2644         */
2645
2646         /* get current pkt produced now - advance it just before sending packet
2647          * since mapping of pages may fail and cause packet to be dropped
2648          */
2649         pkt_prod = txdata->tx_pkt_prod;
2650         bd_prod = TX_BD(txdata->tx_bd_prod);
2651
2652         /* get a tx_buf and first BD
2653          * tx_start_bd may be changed during SPLIT,
2654          * but first_bd will always stay first
2655          */
2656         tx_buf = &txdata->tx_buf_ring[TX_BD(pkt_prod)];
2657         tx_start_bd = &txdata->tx_desc_ring[bd_prod].start_bd;
2658         first_bd = tx_start_bd;
2659
2660         tx_start_bd->bd_flags.as_bitfield = ETH_TX_BD_FLAGS_START_BD;
2661         SET_FLAG(tx_start_bd->general_data, ETH_TX_START_BD_ETH_ADDR_TYPE,
2662                  mac_type);
2663
2664         /* header nbd */
2665         SET_FLAG(tx_start_bd->general_data, ETH_TX_START_BD_HDR_NBDS, 1);
2666
2667         /* remember the first BD of the packet */
2668         tx_buf->first_bd = txdata->tx_bd_prod;
2669         tx_buf->skb = skb;
2670         tx_buf->flags = 0;
2671
2672         DP(NETIF_MSG_TX_QUEUED,
2673            "sending pkt %u @%p  next_idx %u  bd %u @%p\n",
2674            pkt_prod, tx_buf, txdata->tx_pkt_prod, bd_prod, tx_start_bd);
2675
2676         if (vlan_tx_tag_present(skb)) {
2677                 tx_start_bd->vlan_or_ethertype =
2678                     cpu_to_le16(vlan_tx_tag_get(skb));
2679                 tx_start_bd->bd_flags.as_bitfield |=
2680                     (X_ETH_OUTBAND_VLAN << ETH_TX_BD_FLAGS_VLAN_MODE_SHIFT);
2681         } else
2682                 tx_start_bd->vlan_or_ethertype = cpu_to_le16(pkt_prod);
2683
2684         /* turn on parsing and get a BD */
2685         bd_prod = TX_BD(NEXT_TX_IDX(bd_prod));
2686
2687         if (xmit_type & XMIT_CSUM)
2688                 bnx2x_set_sbd_csum(bp, skb, tx_start_bd, xmit_type);
2689
2690         if (!CHIP_IS_E1x(bp)) {
2691                 pbd_e2 = &txdata->tx_desc_ring[bd_prod].parse_bd_e2;
2692                 memset(pbd_e2, 0, sizeof(struct eth_tx_parse_bd_e2));
2693                 /* Set PBD in checksum offload case */
2694                 if (xmit_type & XMIT_CSUM)
2695                         hlen = bnx2x_set_pbd_csum_e2(bp, skb,
2696                                                      &pbd_e2_parsing_data,
2697                                                      xmit_type);
2698                 if (IS_MF_SI(bp)) {
2699                         /*
2700                          * fill in the MAC addresses in the PBD - for local
2701                          * switching
2702                          */
2703                         bnx2x_set_fw_mac_addr(&pbd_e2->src_mac_addr_hi,
2704                                               &pbd_e2->src_mac_addr_mid,
2705                                               &pbd_e2->src_mac_addr_lo,
2706                                               eth->h_source);
2707                         bnx2x_set_fw_mac_addr(&pbd_e2->dst_mac_addr_hi,
2708                                               &pbd_e2->dst_mac_addr_mid,
2709                                               &pbd_e2->dst_mac_addr_lo,
2710                                               eth->h_dest);
2711                 }
2712         } else {
2713                 pbd_e1x = &txdata->tx_desc_ring[bd_prod].parse_bd_e1x;
2714                 memset(pbd_e1x, 0, sizeof(struct eth_tx_parse_bd_e1x));
2715                 /* Set PBD in checksum offload case */
2716                 if (xmit_type & XMIT_CSUM)
2717                         hlen = bnx2x_set_pbd_csum(bp, skb, pbd_e1x, xmit_type);
2718
2719         }
2720
2721         /* Setup the data pointer of the first BD of the packet */
2722         tx_start_bd->addr_hi = cpu_to_le32(U64_HI(mapping));
2723         tx_start_bd->addr_lo = cpu_to_le32(U64_LO(mapping));
2724         nbd = 2; /* start_bd + pbd + frags (updated when pages are mapped) */
2725         tx_start_bd->nbytes = cpu_to_le16(skb_headlen(skb));
2726         pkt_size = tx_start_bd->nbytes;
2727
2728         DP(NETIF_MSG_TX_QUEUED, "first bd @%p  addr (%x:%x)  nbd %d"
2729            "  nbytes %d  flags %x  vlan %x\n",
2730            tx_start_bd, tx_start_bd->addr_hi, tx_start_bd->addr_lo,
2731            le16_to_cpu(tx_start_bd->nbd), le16_to_cpu(tx_start_bd->nbytes),
2732            tx_start_bd->bd_flags.as_bitfield,
2733            le16_to_cpu(tx_start_bd->vlan_or_ethertype));
2734
2735         if (xmit_type & XMIT_GSO) {
2736
2737                 DP(NETIF_MSG_TX_QUEUED,
2738                    "TSO packet len %d  hlen %d  total len %d  tso size %d\n",
2739                    skb->len, hlen, skb_headlen(skb),
2740                    skb_shinfo(skb)->gso_size);
2741
2742                 tx_start_bd->bd_flags.as_bitfield |= ETH_TX_BD_FLAGS_SW_LSO;
2743
2744                 if (unlikely(skb_headlen(skb) > hlen))
2745                         bd_prod = bnx2x_tx_split(bp, txdata, tx_buf,
2746                                                  &tx_start_bd, hlen,
2747                                                  bd_prod, ++nbd);
2748                 if (!CHIP_IS_E1x(bp))
2749                         bnx2x_set_pbd_gso_e2(skb, &pbd_e2_parsing_data,
2750                                              xmit_type);
2751                 else
2752                         bnx2x_set_pbd_gso(skb, pbd_e1x, xmit_type);
2753         }
2754
2755         /* Set the PBD's parsing_data field if not zero
2756          * (for the chips newer than 57711).
2757          */
2758         if (pbd_e2_parsing_data)
2759                 pbd_e2->parsing_data = cpu_to_le32(pbd_e2_parsing_data);
2760
2761         tx_data_bd = (struct eth_tx_bd *)tx_start_bd;
2762
2763         /* Handle fragmented skb */
2764         for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
2765                 skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
2766
2767                 mapping = dma_map_page(&bp->pdev->dev, frag->page,
2768                                        frag->page_offset, frag->size,
2769                                        DMA_TO_DEVICE);
2770                 if (unlikely(dma_mapping_error(&bp->pdev->dev, mapping))) {
2771
2772                         DP(NETIF_MSG_TX_QUEUED, "Unable to map page - "
2773                                                 "dropping packet...\n");
2774
2775                         /* we need unmap all buffers already mapped
2776                          * for this SKB;
2777                          * first_bd->nbd need to be properly updated
2778                          * before call to bnx2x_free_tx_pkt
2779                          */
2780                         first_bd->nbd = cpu_to_le16(nbd);
2781                         bnx2x_free_tx_pkt(bp, txdata,
2782                                           TX_BD(txdata->tx_pkt_prod));
2783                         return NETDEV_TX_OK;
2784                 }
2785
2786                 bd_prod = TX_BD(NEXT_TX_IDX(bd_prod));
2787                 tx_data_bd = &txdata->tx_desc_ring[bd_prod].reg_bd;
2788                 if (total_pkt_bd == NULL)
2789                         total_pkt_bd = &txdata->tx_desc_ring[bd_prod].reg_bd;
2790
2791                 tx_data_bd->addr_hi = cpu_to_le32(U64_HI(mapping));
2792                 tx_data_bd->addr_lo = cpu_to_le32(U64_LO(mapping));
2793                 tx_data_bd->nbytes = cpu_to_le16(frag->size);
2794                 le16_add_cpu(&pkt_size, frag->size);
2795                 nbd++;
2796
2797                 DP(NETIF_MSG_TX_QUEUED,
2798                    "frag %d  bd @%p  addr (%x:%x)  nbytes %d\n",
2799                    i, tx_data_bd, tx_data_bd->addr_hi, tx_data_bd->addr_lo,
2800                    le16_to_cpu(tx_data_bd->nbytes));
2801         }
2802
2803         DP(NETIF_MSG_TX_QUEUED, "last bd @%p\n", tx_data_bd);
2804
2805         /* update with actual num BDs */
2806         first_bd->nbd = cpu_to_le16(nbd);
2807
2808         bd_prod = TX_BD(NEXT_TX_IDX(bd_prod));
2809
2810         /* now send a tx doorbell, counting the next BD
2811          * if the packet contains or ends with it
2812          */
2813         if (TX_BD_POFF(bd_prod) < nbd)
2814                 nbd++;
2815
2816         /* total_pkt_bytes should be set on the first data BD if
2817          * it's not an LSO packet and there is more than one
2818          * data BD. In this case pkt_size is limited by an MTU value.
2819          * However we prefer to set it for an LSO packet (while we don't
2820          * have to) in order to save some CPU cycles in a none-LSO
2821          * case, when we much more care about them.
2822          */
2823         if (total_pkt_bd != NULL)
2824                 total_pkt_bd->total_pkt_bytes = pkt_size;
2825
2826         if (pbd_e1x)
2827                 DP(NETIF_MSG_TX_QUEUED,
2828                    "PBD (E1X) @%p  ip_data %x  ip_hlen %u  ip_id %u  lso_mss %u"
2829                    "  tcp_flags %x  xsum %x  seq %u  hlen %u\n",
2830                    pbd_e1x, pbd_e1x->global_data, pbd_e1x->ip_hlen_w,
2831                    pbd_e1x->ip_id, pbd_e1x->lso_mss, pbd_e1x->tcp_flags,
2832                    pbd_e1x->tcp_pseudo_csum, pbd_e1x->tcp_send_seq,
2833                     le16_to_cpu(pbd_e1x->total_hlen_w));
2834         if (pbd_e2)
2835                 DP(NETIF_MSG_TX_QUEUED,
2836                    "PBD (E2) @%p  dst %x %x %x src %x %x %x parsing_data %x\n",
2837                    pbd_e2, pbd_e2->dst_mac_addr_hi, pbd_e2->dst_mac_addr_mid,
2838                    pbd_e2->dst_mac_addr_lo, pbd_e2->src_mac_addr_hi,
2839                    pbd_e2->src_mac_addr_mid, pbd_e2->src_mac_addr_lo,
2840                    pbd_e2->parsing_data);
2841         DP(NETIF_MSG_TX_QUEUED, "doorbell: nbd %d  bd %u\n", nbd, bd_prod);
2842
2843         txdata->tx_pkt_prod++;
2844         /*
2845          * Make sure that the BD data is updated before updating the producer
2846          * since FW might read the BD right after the producer is updated.
2847          * This is only applicable for weak-ordered memory model archs such
2848          * as IA-64. The following barrier is also mandatory since FW will
2849          * assumes packets must have BDs.
2850          */
2851         wmb();
2852
2853         txdata->tx_db.data.prod += nbd;
2854         barrier();
2855
2856         DOORBELL(bp, txdata->cid, txdata->tx_db.raw);
2857
2858         mmiowb();
2859
2860         txdata->tx_bd_prod += nbd;
2861
2862         if (unlikely(bnx2x_tx_avail(bp, txdata) < MAX_SKB_FRAGS + 3)) {
2863                 netif_tx_stop_queue(txq);
2864
2865                 /* paired memory barrier is in bnx2x_tx_int(), we have to keep
2866                  * ordering of set_bit() in netif_tx_stop_queue() and read of
2867                  * fp->bd_tx_cons */
2868                 smp_mb();
2869
2870                 fp->eth_q_stats.driver_xoff++;
2871                 if (bnx2x_tx_avail(bp, txdata) >= MAX_SKB_FRAGS + 3)
2872                         netif_tx_wake_queue(txq);
2873         }
2874         txdata->tx_pkt++;
2875
2876         return NETDEV_TX_OK;
2877 }
2878
2879 /**
2880  * bnx2x_setup_tc - routine to configure net_device for multi tc
2881  *
2882  * @netdev: net device to configure
2883  * @tc: number of traffic classes to enable
2884  *
2885  * callback connected to the ndo_setup_tc function pointer
2886  */
2887 int bnx2x_setup_tc(struct net_device *dev, u8 num_tc)
2888 {
2889         int cos, prio, count, offset;
2890         struct bnx2x *bp = netdev_priv(dev);
2891
2892         /* setup tc must be called under rtnl lock */
2893         ASSERT_RTNL();
2894
2895         /* no traffic classes requested. aborting */
2896         if (!num_tc) {
2897                 netdev_reset_tc(dev);
2898                 return 0;
2899         }
2900
2901         /* requested to support too many traffic classes */
2902         if (num_tc > bp->max_cos) {
2903                 DP(NETIF_MSG_TX_ERR, "support for too many traffic classes"
2904                                      " requested: %d. max supported is %d",
2905                                      num_tc, bp->max_cos);
2906                 return -EINVAL;
2907         }
2908
2909         /* declare amount of supported traffic classes */
2910         if (netdev_set_num_tc(dev, num_tc)) {
2911                 DP(NETIF_MSG_TX_ERR, "failed to declare %d traffic classes",
2912                                      num_tc);
2913                 return -EINVAL;
2914         }
2915
2916         /* configure priority to traffic class mapping */
2917         for (prio = 0; prio < BNX2X_MAX_PRIORITY; prio++) {
2918                 netdev_set_prio_tc_map(dev, prio, bp->prio_to_cos[prio]);
2919                 DP(BNX2X_MSG_SP, "mapping priority %d to tc %d",
2920                    prio, bp->prio_to_cos[prio]);
2921         }
2922
2923
2924         /* Use this configuration to diffrentiate tc0 from other COSes
2925            This can be used for ets or pfc, and save the effort of setting
2926            up a multio class queue disc or negotiating DCBX with a switch
2927         netdev_set_prio_tc_map(dev, 0, 0);
2928         DP(BNX2X_MSG_SP, "mapping priority %d to tc %d", 0, 0);
2929         for (prio = 1; prio < 16; prio++) {
2930                 netdev_set_prio_tc_map(dev, prio, 1);
2931                 DP(BNX2X_MSG_SP, "mapping priority %d to tc %d", prio, 1);
2932         } */
2933
2934         /* configure traffic class to transmission queue mapping */
2935         for (cos = 0; cos < bp->max_cos; cos++) {
2936                 count = BNX2X_NUM_ETH_QUEUES(bp);
2937                 offset = cos * MAX_TXQS_PER_COS;
2938                 netdev_set_tc_queue(dev, cos, count, offset);
2939                 DP(BNX2X_MSG_SP, "mapping tc %d to offset %d count %d",
2940                    cos, offset, count);
2941         }
2942
2943         return 0;
2944 }
2945
2946 /* called with rtnl_lock */
2947 int bnx2x_change_mac_addr(struct net_device *dev, void *p)
2948 {
2949         struct sockaddr *addr = p;
2950         struct bnx2x *bp = netdev_priv(dev);
2951         int rc = 0;
2952
2953         if (!is_valid_ether_addr((u8 *)(addr->sa_data)))
2954                 return -EINVAL;
2955
2956         if (netif_running(dev))  {
2957                 rc = bnx2x_set_eth_mac(bp, false);
2958                 if (rc)
2959                         return rc;
2960         }
2961
2962         memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
2963
2964         if (netif_running(dev))
2965                 rc = bnx2x_set_eth_mac(bp, true);
2966
2967         return rc;
2968 }
2969
2970 static void bnx2x_free_fp_mem_at(struct bnx2x *bp, int fp_index)
2971 {
2972         union host_hc_status_block *sb = &bnx2x_fp(bp, fp_index, status_blk);
2973         struct bnx2x_fastpath *fp = &bp->fp[fp_index];
2974         u8 cos;
2975
2976         /* Common */
2977 #ifdef BCM_CNIC
2978         if (IS_FCOE_IDX(fp_index)) {
2979                 memset(sb, 0, sizeof(union host_hc_status_block));
2980                 fp->status_blk_mapping = 0;
2981
2982         } else {
2983 #endif
2984                 /* status blocks */
2985                 if (!CHIP_IS_E1x(bp))
2986                         BNX2X_PCI_FREE(sb->e2_sb,
2987                                        bnx2x_fp(bp, fp_index,
2988                                                 status_blk_mapping),
2989                                        sizeof(struct host_hc_status_block_e2));
2990                 else
2991                         BNX2X_PCI_FREE(sb->e1x_sb,
2992                                        bnx2x_fp(bp, fp_index,
2993                                                 status_blk_mapping),
2994                                        sizeof(struct host_hc_status_block_e1x));
2995 #ifdef BCM_CNIC
2996         }
2997 #endif
2998         /* Rx */
2999         if (!skip_rx_queue(bp, fp_index)) {
3000                 bnx2x_free_rx_bds(fp);
3001
3002                 /* fastpath rx rings: rx_buf rx_desc rx_comp */
3003                 BNX2X_FREE(bnx2x_fp(bp, fp_index, rx_buf_ring));
3004                 BNX2X_PCI_FREE(bnx2x_fp(bp, fp_index, rx_desc_ring),
3005                                bnx2x_fp(bp, fp_index, rx_desc_mapping),
3006                                sizeof(struct eth_rx_bd) * NUM_RX_BD);
3007
3008                 BNX2X_PCI_FREE(bnx2x_fp(bp, fp_index, rx_comp_ring),
3009                                bnx2x_fp(bp, fp_index, rx_comp_mapping),
3010                                sizeof(struct eth_fast_path_rx_cqe) *
3011                                NUM_RCQ_BD);
3012
3013                 /* SGE ring */
3014                 BNX2X_FREE(bnx2x_fp(bp, fp_index, rx_page_ring));
3015                 BNX2X_PCI_FREE(bnx2x_fp(bp, fp_index, rx_sge_ring),
3016                                bnx2x_fp(bp, fp_index, rx_sge_mapping),
3017                                BCM_PAGE_SIZE * NUM_RX_SGE_PAGES);
3018         }
3019
3020         /* Tx */
3021         if (!skip_tx_queue(bp, fp_index)) {
3022                 /* fastpath tx rings: tx_buf tx_desc */
3023                 for_each_cos_in_tx_queue(fp, cos) {
3024                         struct bnx2x_fp_txdata *txdata = &fp->txdata[cos];
3025
3026                         DP(BNX2X_MSG_SP,
3027                            "freeing tx memory of fp %d cos %d cid %d",
3028                            fp_index, cos, txdata->cid);
3029
3030                         BNX2X_FREE(txdata->tx_buf_ring);
3031                         BNX2X_PCI_FREE(txdata->tx_desc_ring,
3032                                 txdata->tx_desc_mapping,
3033                                 sizeof(union eth_tx_bd_types) * NUM_TX_BD);
3034                 }
3035         }
3036         /* end of fastpath */
3037 }
3038
3039 void bnx2x_free_fp_mem(struct bnx2x *bp)
3040 {
3041         int i;
3042         for_each_queue(bp, i)
3043                 bnx2x_free_fp_mem_at(bp, i);
3044 }
3045
3046 static inline void set_sb_shortcuts(struct bnx2x *bp, int index)
3047 {
3048         union host_hc_status_block status_blk = bnx2x_fp(bp, index, status_blk);
3049         if (!CHIP_IS_E1x(bp)) {
3050                 bnx2x_fp(bp, index, sb_index_values) =
3051                         (__le16 *)status_blk.e2_sb->sb.index_values;
3052                 bnx2x_fp(bp, index, sb_running_index) =
3053                         (__le16 *)status_blk.e2_sb->sb.running_index;
3054         } else {
3055                 bnx2x_fp(bp, index, sb_index_values) =
3056                         (__le16 *)status_blk.e1x_sb->sb.index_values;
3057                 bnx2x_fp(bp, index, sb_running_index) =
3058                         (__le16 *)status_blk.e1x_sb->sb.running_index;
3059         }
3060 }
3061
3062 static int bnx2x_alloc_fp_mem_at(struct bnx2x *bp, int index)
3063 {
3064         union host_hc_status_block *sb;
3065         struct bnx2x_fastpath *fp = &bp->fp[index];
3066         int ring_size = 0;
3067         u8 cos;
3068
3069         /* if rx_ring_size specified - use it */
3070         int rx_ring_size = bp->rx_ring_size ? bp->rx_ring_size :
3071                            MAX_RX_AVAIL/BNX2X_NUM_RX_QUEUES(bp);
3072
3073         /* allocate at least number of buffers required by FW */
3074         rx_ring_size = max_t(int, bp->disable_tpa ? MIN_RX_SIZE_NONTPA :
3075                                                     MIN_RX_SIZE_TPA,
3076                                   rx_ring_size);
3077
3078         /* Common */
3079         sb = &bnx2x_fp(bp, index, status_blk);
3080 #ifdef BCM_CNIC
3081         if (!IS_FCOE_IDX(index)) {
3082 #endif
3083                 /* status blocks */
3084                 if (!CHIP_IS_E1x(bp))
3085                         BNX2X_PCI_ALLOC(sb->e2_sb,
3086                                 &bnx2x_fp(bp, index, status_blk_mapping),
3087                                 sizeof(struct host_hc_status_block_e2));
3088                 else
3089                         BNX2X_PCI_ALLOC(sb->e1x_sb,
3090                                 &bnx2x_fp(bp, index, status_blk_mapping),
3091                             sizeof(struct host_hc_status_block_e1x));
3092 #ifdef BCM_CNIC
3093         }
3094 #endif
3095
3096         /* FCoE Queue uses Default SB and doesn't ACK the SB, thus no need to
3097          * set shortcuts for it.
3098          */
3099         if (!IS_FCOE_IDX(index))
3100                 set_sb_shortcuts(bp, index);
3101
3102         /* Tx */
3103         if (!skip_tx_queue(bp, index)) {
3104                 /* fastpath tx rings: tx_buf tx_desc */
3105                 for_each_cos_in_tx_queue(fp, cos) {
3106                         struct bnx2x_fp_txdata *txdata = &fp->txdata[cos];
3107
3108                         DP(BNX2X_MSG_SP, "allocating tx memory of "
3109                                          "fp %d cos %d",
3110                            index, cos);
3111
3112                         BNX2X_ALLOC(txdata->tx_buf_ring,
3113                                 sizeof(struct sw_tx_bd) * NUM_TX_BD);
3114                         BNX2X_PCI_ALLOC(txdata->tx_desc_ring,
3115                                 &txdata->tx_desc_mapping,
3116                                 sizeof(union eth_tx_bd_types) * NUM_TX_BD);
3117                 }
3118         }
3119
3120         /* Rx */
3121         if (!skip_rx_queue(bp, index)) {
3122                 /* fastpath rx rings: rx_buf rx_desc rx_comp */
3123                 BNX2X_ALLOC(bnx2x_fp(bp, index, rx_buf_ring),
3124                                 sizeof(struct sw_rx_bd) * NUM_RX_BD);
3125                 BNX2X_PCI_ALLOC(bnx2x_fp(bp, index, rx_desc_ring),
3126                                 &bnx2x_fp(bp, index, rx_desc_mapping),
3127                                 sizeof(struct eth_rx_bd) * NUM_RX_BD);
3128
3129                 BNX2X_PCI_ALLOC(bnx2x_fp(bp, index, rx_comp_ring),
3130                                 &bnx2x_fp(bp, index, rx_comp_mapping),
3131                                 sizeof(struct eth_fast_path_rx_cqe) *
3132                                 NUM_RCQ_BD);
3133
3134                 /* SGE ring */
3135                 BNX2X_ALLOC(bnx2x_fp(bp, index, rx_page_ring),
3136                                 sizeof(struct sw_rx_page) * NUM_RX_SGE);
3137                 BNX2X_PCI_ALLOC(bnx2x_fp(bp, index, rx_sge_ring),
3138                                 &bnx2x_fp(bp, index, rx_sge_mapping),
3139                                 BCM_PAGE_SIZE * NUM_RX_SGE_PAGES);
3140                 /* RX BD ring */
3141                 bnx2x_set_next_page_rx_bd(fp);
3142
3143                 /* CQ ring */
3144                 bnx2x_set_next_page_rx_cq(fp);
3145
3146                 /* BDs */
3147                 ring_size = bnx2x_alloc_rx_bds(fp, rx_ring_size);
3148                 if (ring_size < rx_ring_size)
3149                         goto alloc_mem_err;
3150         }
3151
3152         return 0;
3153
3154 /* handles low memory cases */
3155 alloc_mem_err:
3156         BNX2X_ERR("Unable to allocate full memory for queue %d (size %d)\n",
3157                                                 index, ring_size);
3158         /* FW will drop all packets if queue is not big enough,
3159          * In these cases we disable the queue
3160          * Min size is different for OOO, TPA and non-TPA queues
3161          */
3162         if (ring_size < (fp->disable_tpa ?
3163                                 MIN_RX_SIZE_NONTPA : MIN_RX_SIZE_TPA)) {
3164                         /* release memory allocated for this queue */
3165                         bnx2x_free_fp_mem_at(bp, index);
3166                         return -ENOMEM;
3167         }
3168         return 0;
3169 }
3170
3171 int bnx2x_alloc_fp_mem(struct bnx2x *bp)
3172 {
3173         int i;
3174
3175         /**
3176          * 1. Allocate FP for leading - fatal if error
3177          * 2. {CNIC} Allocate FCoE FP - fatal if error
3178          * 3. {CNIC} Allocate OOO + FWD - disable OOO if error
3179          * 4. Allocate RSS - fix number of queues if error
3180          */
3181
3182         /* leading */
3183         if (bnx2x_alloc_fp_mem_at(bp, 0))
3184                 return -ENOMEM;
3185
3186 #ifdef BCM_CNIC
3187         if (!NO_FCOE(bp))
3188                 /* FCoE */
3189                 if (bnx2x_alloc_fp_mem_at(bp, FCOE_IDX))
3190                         /* we will fail load process instead of mark
3191                          * NO_FCOE_FLAG
3192                          */
3193                         return -ENOMEM;
3194 #endif
3195
3196         /* RSS */
3197         for_each_nondefault_eth_queue(bp, i)
3198                 if (bnx2x_alloc_fp_mem_at(bp, i))
3199                         break;
3200
3201         /* handle memory failures */
3202         if (i != BNX2X_NUM_ETH_QUEUES(bp)) {
3203                 int delta = BNX2X_NUM_ETH_QUEUES(bp) - i;
3204
3205                 WARN_ON(delta < 0);
3206 #ifdef BCM_CNIC
3207                 /**
3208                  * move non eth FPs next to last eth FP
3209                  * must be done in that order
3210                  * FCOE_IDX < FWD_IDX < OOO_IDX
3211                  */
3212
3213                 /* move FCoE fp even NO_FCOE_FLAG is on */
3214                 bnx2x_move_fp(bp, FCOE_IDX, FCOE_IDX - delta);
3215 #endif
3216                 bp->num_queues -= delta;
3217                 BNX2X_ERR("Adjusted num of queues from %d to %d\n",
3218                           bp->num_queues + delta, bp->num_queues);
3219         }
3220
3221         return 0;
3222 }
3223
3224 void bnx2x_free_mem_bp(struct bnx2x *bp)
3225 {
3226         kfree(bp->fp);
3227         kfree(bp->msix_table);
3228         kfree(bp->ilt);
3229 }
3230
3231 int __devinit bnx2x_alloc_mem_bp(struct bnx2x *bp)
3232 {
3233         struct bnx2x_fastpath *fp;
3234         struct msix_entry *tbl;
3235         struct bnx2x_ilt *ilt;
3236         int msix_table_size = 0;
3237
3238         /*
3239          * The biggest MSI-X table we might need is as a maximum number of fast
3240          * path IGU SBs plus default SB (for PF).
3241          */
3242         msix_table_size = bp->igu_sb_cnt + 1;
3243
3244         /* fp array: RSS plus CNIC related L2 queues */
3245         fp = kzalloc((BNX2X_MAX_RSS_COUNT(bp) + NON_ETH_CONTEXT_USE) *
3246                      sizeof(*fp), GFP_KERNEL);
3247         if (!fp)
3248                 goto alloc_err;
3249         bp->fp = fp;
3250
3251         /* msix table */
3252         tbl = kzalloc(msix_table_size * sizeof(*tbl), GFP_KERNEL);
3253         if (!tbl)
3254                 goto alloc_err;
3255         bp->msix_table = tbl;
3256
3257         /* ilt */
3258         ilt = kzalloc(sizeof(*ilt), GFP_KERNEL);
3259         if (!ilt)
3260                 goto alloc_err;
3261         bp->ilt = ilt;
3262
3263         return 0;
3264 alloc_err:
3265         bnx2x_free_mem_bp(bp);
3266         return -ENOMEM;
3267
3268 }
3269
3270 int bnx2x_reload_if_running(struct net_device *dev)
3271 {
3272         struct bnx2x *bp = netdev_priv(dev);
3273
3274         if (unlikely(!netif_running(dev)))
3275                 return 0;
3276
3277         bnx2x_nic_unload(bp, UNLOAD_NORMAL);
3278         return bnx2x_nic_load(bp, LOAD_NORMAL);
3279 }
3280
3281 int bnx2x_get_cur_phy_idx(struct bnx2x *bp)
3282 {
3283         u32 sel_phy_idx = 0;
3284         if (bp->link_params.num_phys <= 1)
3285                 return INT_PHY;
3286
3287         if (bp->link_vars.link_up) {
3288                 sel_phy_idx = EXT_PHY1;
3289                 /* In case link is SERDES, check if the EXT_PHY2 is the one */
3290                 if ((bp->link_vars.link_status & LINK_STATUS_SERDES_LINK) &&
3291                     (bp->link_params.phy[EXT_PHY2].supported & SUPPORTED_FIBRE))
3292                         sel_phy_idx = EXT_PHY2;
3293         } else {
3294
3295                 switch (bnx2x_phy_selection(&bp->link_params)) {
3296                 case PORT_HW_CFG_PHY_SELECTION_HARDWARE_DEFAULT:
3297                 case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY:
3298                 case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY:
3299                        sel_phy_idx = EXT_PHY1;
3300                        break;
3301                 case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY:
3302                 case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY_PRIORITY:
3303                        sel_phy_idx = EXT_PHY2;
3304                        break;
3305                 }
3306         }
3307
3308         return sel_phy_idx;
3309
3310 }
3311 int bnx2x_get_link_cfg_idx(struct bnx2x *bp)
3312 {
3313         u32 sel_phy_idx = bnx2x_get_cur_phy_idx(bp);
3314         /*
3315          * The selected actived PHY is always after swapping (in case PHY
3316          * swapping is enabled). So when swapping is enabled, we need to reverse
3317          * the configuration
3318          */
3319
3320         if (bp->link_params.multi_phy_config &
3321             PORT_HW_CFG_PHY_SWAPPED_ENABLED) {
3322                 if (sel_phy_idx == EXT_PHY1)
3323                         sel_phy_idx = EXT_PHY2;
3324                 else if (sel_phy_idx == EXT_PHY2)
3325                         sel_phy_idx = EXT_PHY1;
3326         }
3327         return LINK_CONFIG_IDX(sel_phy_idx);
3328 }
3329
3330 /* called with rtnl_lock */
3331 int bnx2x_change_mtu(struct net_device *dev, int new_mtu)
3332 {
3333         struct bnx2x *bp = netdev_priv(dev);
3334
3335         if (bp->recovery_state != BNX2X_RECOVERY_DONE) {
3336                 printk(KERN_ERR "Handling parity error recovery. Try again later\n");
3337                 return -EAGAIN;
3338         }
3339
3340         if ((new_mtu > ETH_MAX_JUMBO_PACKET_SIZE) ||
3341             ((new_mtu + ETH_HLEN) < ETH_MIN_PACKET_SIZE))
3342                 return -EINVAL;
3343
3344         /* This does not race with packet allocation
3345          * because the actual alloc size is
3346          * only updated as part of load
3347          */
3348         dev->mtu = new_mtu;
3349
3350         return bnx2x_reload_if_running(dev);
3351 }
3352
3353 u32 bnx2x_fix_features(struct net_device *dev, u32 features)
3354 {
3355         struct bnx2x *bp = netdev_priv(dev);
3356
3357         /* TPA requires Rx CSUM offloading */
3358         if (!(features & NETIF_F_RXCSUM) || bp->disable_tpa)
3359                 features &= ~NETIF_F_LRO;
3360
3361         return features;
3362 }
3363
3364 int bnx2x_set_features(struct net_device *dev, u32 features)
3365 {
3366         struct bnx2x *bp = netdev_priv(dev);
3367         u32 flags = bp->flags;
3368         bool bnx2x_reload = false;
3369
3370         if (features & NETIF_F_LRO)
3371                 flags |= TPA_ENABLE_FLAG;
3372         else
3373                 flags &= ~TPA_ENABLE_FLAG;
3374
3375         if (features & NETIF_F_LOOPBACK) {
3376                 if (bp->link_params.loopback_mode != LOOPBACK_BMAC) {
3377                         bp->link_params.loopback_mode = LOOPBACK_BMAC;
3378                         bnx2x_reload = true;
3379                 }
3380         } else {
3381                 if (bp->link_params.loopback_mode != LOOPBACK_NONE) {
3382                         bp->link_params.loopback_mode = LOOPBACK_NONE;
3383                         bnx2x_reload = true;
3384                 }
3385         }
3386
3387         if (flags ^ bp->flags) {
3388                 bp->flags = flags;
3389                 bnx2x_reload = true;
3390         }
3391
3392         if (bnx2x_reload) {
3393                 if (bp->recovery_state == BNX2X_RECOVERY_DONE)
3394                         return bnx2x_reload_if_running(dev);
3395                 /* else: bnx2x_nic_load() will be called at end of recovery */
3396         }
3397
3398         return 0;
3399 }
3400
3401 void bnx2x_tx_timeout(struct net_device *dev)
3402 {
3403         struct bnx2x *bp = netdev_priv(dev);
3404
3405 #ifdef BNX2X_STOP_ON_ERROR
3406         if (!bp->panic)
3407                 bnx2x_panic();
3408 #endif
3409
3410         smp_mb__before_clear_bit();
3411         set_bit(BNX2X_SP_RTNL_TX_TIMEOUT, &bp->sp_rtnl_state);
3412         smp_mb__after_clear_bit();
3413
3414         /* This allows the netif to be shutdown gracefully before resetting */
3415         schedule_delayed_work(&bp->sp_rtnl_task, 0);
3416 }
3417
3418 int bnx2x_suspend(struct pci_dev *pdev, pm_message_t state)
3419 {
3420         struct net_device *dev = pci_get_drvdata(pdev);
3421         struct bnx2x *bp;
3422
3423         if (!dev) {
3424                 dev_err(&pdev->dev, "BAD net device from bnx2x_init_one\n");
3425                 return -ENODEV;
3426         }
3427         bp = netdev_priv(dev);
3428
3429         rtnl_lock();
3430
3431         pci_save_state(pdev);
3432
3433         if (!netif_running(dev)) {
3434                 rtnl_unlock();
3435                 return 0;
3436         }
3437
3438         netif_device_detach(dev);
3439
3440         bnx2x_nic_unload(bp, UNLOAD_CLOSE);
3441
3442         bnx2x_set_power_state(bp, pci_choose_state(pdev, state));
3443
3444         rtnl_unlock();
3445
3446         return 0;
3447 }
3448
3449 int bnx2x_resume(struct pci_dev *pdev)
3450 {
3451         struct net_device *dev = pci_get_drvdata(pdev);
3452         struct bnx2x *bp;
3453         int rc;
3454
3455         if (!dev) {
3456                 dev_err(&pdev->dev, "BAD net device from bnx2x_init_one\n");
3457                 return -ENODEV;
3458         }
3459         bp = netdev_priv(dev);
3460
3461         if (bp->recovery_state != BNX2X_RECOVERY_DONE) {
3462                 printk(KERN_ERR "Handling parity error recovery. Try again later\n");
3463                 return -EAGAIN;
3464         }
3465
3466         rtnl_lock();
3467
3468         pci_restore_state(pdev);
3469
3470         if (!netif_running(dev)) {
3471                 rtnl_unlock();
3472                 return 0;
3473         }
3474
3475         bnx2x_set_power_state(bp, PCI_D0);
3476         netif_device_attach(dev);
3477
3478         /* Since the chip was reset, clear the FW sequence number */
3479         bp->fw_seq = 0;
3480         rc = bnx2x_nic_load(bp, LOAD_OPEN);
3481
3482         rtnl_unlock();
3483
3484         return rc;
3485 }
3486
3487
3488 void bnx2x_set_ctx_validation(struct bnx2x *bp, struct eth_context *cxt,
3489                               u32 cid)
3490 {
3491         /* ustorm cxt validation */
3492         cxt->ustorm_ag_context.cdu_usage =
3493                 CDU_RSRVD_VALUE_TYPE_A(HW_CID(bp, cid),
3494                         CDU_REGION_NUMBER_UCM_AG, ETH_CONNECTION_TYPE);
3495         /* xcontext validation */
3496         cxt->xstorm_ag_context.cdu_reserved =
3497                 CDU_RSRVD_VALUE_TYPE_A(HW_CID(bp, cid),
3498                         CDU_REGION_NUMBER_XCM_AG, ETH_CONNECTION_TYPE);
3499 }
3500
3501 static inline void storm_memset_hc_timeout(struct bnx2x *bp, u8 port,
3502                                              u8 fw_sb_id, u8 sb_index,
3503                                              u8 ticks)
3504 {
3505
3506         u32 addr = BAR_CSTRORM_INTMEM +
3507                    CSTORM_STATUS_BLOCK_DATA_TIMEOUT_OFFSET(fw_sb_id, sb_index);
3508         REG_WR8(bp, addr, ticks);
3509         DP(NETIF_MSG_HW, "port %x fw_sb_id %d sb_index %d ticks %d\n",
3510                           port, fw_sb_id, sb_index, ticks);
3511 }
3512
3513 static inline void storm_memset_hc_disable(struct bnx2x *bp, u8 port,
3514                                              u16 fw_sb_id, u8 sb_index,
3515                                              u8 disable)
3516 {
3517         u32 enable_flag = disable ? 0 : (1 << HC_INDEX_DATA_HC_ENABLED_SHIFT);
3518         u32 addr = BAR_CSTRORM_INTMEM +
3519                    CSTORM_STATUS_BLOCK_DATA_FLAGS_OFFSET(fw_sb_id, sb_index);
3520         u16 flags = REG_RD16(bp, addr);
3521         /* clear and set */
3522         flags &= ~HC_INDEX_DATA_HC_ENABLED;
3523         flags |= enable_flag;
3524         REG_WR16(bp, addr, flags);
3525         DP(NETIF_MSG_HW, "port %x fw_sb_id %d sb_index %d disable %d\n",
3526                           port, fw_sb_id, sb_index, disable);
3527 }
3528
3529 void bnx2x_update_coalesce_sb_index(struct bnx2x *bp, u8 fw_sb_id,
3530                                     u8 sb_index, u8 disable, u16 usec)
3531 {
3532         int port = BP_PORT(bp);
3533         u8 ticks = usec / BNX2X_BTR;
3534
3535         storm_memset_hc_timeout(bp, port, fw_sb_id, sb_index, ticks);
3536
3537         disable = disable ? 1 : (usec ? 0 : 1);
3538         storm_memset_hc_disable(bp, port, fw_sb_id, sb_index, disable);
3539 }