drivers/net/bnx2x/bnx2x_cmn.c

   1 /* bnx2x_cmn.c: Broadcom Everest network driver.
   2  *
   3  * Copyright (c) 2007-2011 Broadcom Corporation
   4  *
   5  * This program is free software; you can redistribute it and/or modify
   6  * it under the terms of the GNU General Public License as published by
   7  * the Free Software Foundation.
   8  *
   9  * Maintained by: Eilon Greenstein <eilong@broadcom.com>
  10  * Written by: Eliezer Tamir
  11  * Based on code from Michael Chan's bnx2 driver
  12  * UDP CSUM errata workaround by Arik Gendelman
  13  * Slowpath and fastpath rework by Vladislav Zolotarov
  14  * Statistics and Link management by Yitchak Gertner
  15  *
  16  */
  17
  18 #include <linux/etherdevice.h>
  19 #include <linux/if_vlan.h>
  20 #include <linux/interrupt.h>
  21 #include <linux/ip.h>
  22 #include <net/ipv6.h>
  23 #include <net/ip6_checksum.h>
  24 #include <linux/firmware.h>
  25 #include <linux/prefetch.h>
  26 #include "bnx2x_cmn.h"
  27 #include "bnx2x_init.h"
  28 #include "bnx2x_sp.h"
  29
  30
  31
  32 /**
  33  * bnx2x_bz_fp - zero content of the fastpath structure.
  34  *
  35  * @bp:         driver handle
  36  * @index:      fastpath index to be zeroed
  37  *
  38  * Makes sure the contents of the bp->fp[index].napi is kept
  39  * intact.
  40  */
  41 static inline void bnx2x_bz_fp(struct bnx2x *bp, int index)
  42 {
  43         struct bnx2x_fastpath *fp = &bp->fp[index];
  44         struct napi_struct orig_napi = fp->napi;
  45         /* bzero bnx2x_fastpath contents */
  46         memset(fp, 0, sizeof(*fp));
  47
  48         /* Restore the NAPI object as it has been already initialized */
  49         fp->napi = orig_napi;
  50
  51         fp->bp = bp;
  52         fp->index = index;
  53         if (IS_ETH_FP(fp))
  54                 fp->max_cos = bp->max_cos;
  55         else
  56                 /* Special queues support only one CoS */
  57                 fp->max_cos = 1;
  58
  59         /*
  60          * set the tpa flag for each queue. The tpa flag determines the queue
  61          * minimal size so it must be set prior to queue memory allocation
  62          */
  63         fp->disable_tpa = ((bp->flags & TPA_ENABLE_FLAG) == 0);
  64
  65 #ifdef BCM_CNIC
  66         /* We don't want TPA on FCoE, FWD and OOO L2 rings */
  67         bnx2x_fcoe(bp, disable_tpa) = 1;
  68 #endif
  69 }
  70
  71 /**
  72  * bnx2x_move_fp - move content of the fastpath structure.
  73  *
  74  * @bp:         driver handle
  75  * @from:       source FP index
  76  * @to:         destination FP index
  77  *
  78  * Makes sure the contents of the bp->fp[to].napi is kept
  79  * intact.
  80  */
  81 static inline void bnx2x_move_fp(struct bnx2x *bp, int from, int to)
  82 {
  83         struct bnx2x_fastpath *from_fp = &bp->fp[from];
  84         struct bnx2x_fastpath *to_fp = &bp->fp[to];
  85         struct napi_struct orig_napi = to_fp->napi;
  86         /* Move bnx2x_fastpath contents */
  87         memcpy(to_fp, from_fp, sizeof(*to_fp));
  88         to_fp->index = to;
  89
  90         /* Restore the NAPI object as it has been already initialized */
  91         to_fp->napi = orig_napi;
  92 }
  93
  94 int load_count[2][3] = { {0} }; /* per-path: 0-common, 1-port0, 2-port1 */
  95
  96 /* free skb in the packet ring at pos idx
  97  * return idx of last bd freed
  98  */
  99 static u16 bnx2x_free_tx_pkt(struct bnx2x *bp, struct bnx2x_fp_txdata *txdata,
 100                              u16 idx)
 101 {
 102         struct sw_tx_bd *tx_buf = &txdata->tx_buf_ring[idx];
 103         struct eth_tx_start_bd *tx_start_bd;
 104         struct eth_tx_bd *tx_data_bd;
 105         struct sk_buff *skb = tx_buf->skb;
 106         u16 bd_idx = TX_BD(tx_buf->first_bd), new_cons;
 107         int nbd;
 108
 109         /* prefetch skb end pointer to speedup dev_kfree_skb() */
 110         prefetch(&skb->end);
 111
 112         DP(BNX2X_MSG_FP, "fp[%d]: pkt_idx %d  buff @(%p)->skb %p\n",
 113            txdata->txq_index, idx, tx_buf, skb);
 114
 115         /* unmap first bd */
 116         DP(BNX2X_MSG_OFF, "free bd_idx %d\n", bd_idx);
 117         tx_start_bd = &txdata->tx_desc_ring[bd_idx].start_bd;
 118         dma_unmap_single(&bp->pdev->dev, BD_UNMAP_ADDR(tx_start_bd),
 119                          BD_UNMAP_LEN(tx_start_bd), DMA_TO_DEVICE);
 120
 121
 122         nbd = le16_to_cpu(tx_start_bd->nbd) - 1;
 123 #ifdef BNX2X_STOP_ON_ERROR
 124         if ((nbd - 1) > (MAX_SKB_FRAGS + 2)) {
 125                 BNX2X_ERR("BAD nbd!\n");
 126                 bnx2x_panic();
 127         }
 128 #endif
 129         new_cons = nbd + tx_buf->first_bd;
 130
 131         /* Get the next bd */
 132         bd_idx = TX_BD(NEXT_TX_IDX(bd_idx));
 133
 134         /* Skip a parse bd... */
 135         --nbd;
 136         bd_idx = TX_BD(NEXT_TX_IDX(bd_idx));
 137
 138         /* ...and the TSO split header bd since they have no mapping */
 139         if (tx_buf->flags & BNX2X_TSO_SPLIT_BD) {
 140                 --nbd;
 141                 bd_idx = TX_BD(NEXT_TX_IDX(bd_idx));
 142         }
 143
 144         /* now free frags */
 145         while (nbd > 0) {
 146
 147                 DP(BNX2X_MSG_OFF, "free frag bd_idx %d\n", bd_idx);
 148                 tx_data_bd = &txdata->tx_desc_ring[bd_idx].reg_bd;
 149                 dma_unmap_page(&bp->pdev->dev, BD_UNMAP_ADDR(tx_data_bd),
 150                                BD_UNMAP_LEN(tx_data_bd), DMA_TO_DEVICE);
 151                 if (--nbd)
 152                         bd_idx = TX_BD(NEXT_TX_IDX(bd_idx));
 153         }
 154
 155         /* release skb */
 156         WARN_ON(!skb);
 157         dev_kfree_skb_any(skb);
 158         tx_buf->first_bd = 0;
 159         tx_buf->skb = NULL;
 160
 161         return new_cons;
 162 }
 163
 164 int bnx2x_tx_int(struct bnx2x *bp, struct bnx2x_fp_txdata *txdata)
 165 {
 166         struct netdev_queue *txq;
 167         u16 hw_cons, sw_cons, bd_cons = txdata->tx_bd_cons;
 168
 169 #ifdef BNX2X_STOP_ON_ERROR
 170         if (unlikely(bp->panic))
 171                 return -1;
 172 #endif
 173
 174         txq = netdev_get_tx_queue(bp->dev, txdata->txq_index);
 175         hw_cons = le16_to_cpu(*txdata->tx_cons_sb);
 176         sw_cons = txdata->tx_pkt_cons;
 177
 178         while (sw_cons != hw_cons) {
 179                 u16 pkt_cons;
 180
 181                 pkt_cons = TX_BD(sw_cons);
 182
 183                 DP(NETIF_MSG_TX_DONE, "queue[%d]: hw_cons %u  sw_cons %u "
 184                                       " pkt_cons %u\n",
 185                    txdata->txq_index, hw_cons, sw_cons, pkt_cons);
 186
 187                 bd_cons = bnx2x_free_tx_pkt(bp, txdata, pkt_cons);
 188                 sw_cons++;
 189         }
 190
 191         txdata->tx_pkt_cons = sw_cons;
 192         txdata->tx_bd_cons = bd_cons;
 193
 194         /* Need to make the tx_bd_cons update visible to start_xmit()
 195          * before checking for netif_tx_queue_stopped().  Without the
 196          * memory barrier, there is a small possibility that
 197          * start_xmit() will miss it and cause the queue to be stopped
 198          * forever.
 199          * On the other hand we need an rmb() here to ensure the proper
 200          * ordering of bit testing in the following
 201          * netif_tx_queue_stopped(txq) call.
 202          */
 203         smp_mb();
 204
 205         if (unlikely(netif_tx_queue_stopped(txq))) {
 206                 /* Taking tx_lock() is needed to prevent reenabling the queue
 207                  * while it's empty. This could have happen if rx_action() gets
 208                  * suspended in bnx2x_tx_int() after the condition before
 209                  * netif_tx_wake_queue(), while tx_action (bnx2x_start_xmit()):
 210                  *
 211                  * stops the queue->sees fresh tx_bd_cons->releases the queue->
 212                  * sends some packets consuming the whole queue again->
 213                  * stops the queue
 214                  */
 215
 216                 __netif_tx_lock(txq, smp_processor_id());
 217
 218                 if ((netif_tx_queue_stopped(txq)) &&
 219                     (bp->state == BNX2X_STATE_OPEN) &&
 220                     (bnx2x_tx_avail(bp, txdata) >= MAX_SKB_FRAGS + 3))
 221                         netif_tx_wake_queue(txq);
 222
 223                 __netif_tx_unlock(txq);
 224         }
 225         return 0;
 226 }
 227
 228 static inline void bnx2x_update_last_max_sge(struct bnx2x_fastpath *fp,
 229                                              u16 idx)
 230 {
 231         u16 last_max = fp->last_max_sge;
 232
 233         if (SUB_S16(idx, last_max) > 0)
 234                 fp->last_max_sge = idx;
 235 }
 236
 237 static void bnx2x_update_sge_prod(struct bnx2x_fastpath *fp,
 238                                   struct eth_fast_path_rx_cqe *fp_cqe)
 239 {
 240         struct bnx2x *bp = fp->bp;
 241         u16 sge_len = SGE_PAGE_ALIGN(le16_to_cpu(fp_cqe->pkt_len) -
 242                                      le16_to_cpu(fp_cqe->len_on_bd)) >>
 243                       SGE_PAGE_SHIFT;
 244         u16 last_max, last_elem, first_elem;
 245         u16 delta = 0;
 246         u16 i;
 247
 248         if (!sge_len)
 249                 return;
 250
 251         /* First mark all used pages */
 252         for (i = 0; i < sge_len; i++)
 253                 BIT_VEC64_CLEAR_BIT(fp->sge_mask,
 254                         RX_SGE(le16_to_cpu(fp_cqe->sgl_or_raw_data.sgl[i])));
 255
 256         DP(NETIF_MSG_RX_STATUS, "fp_cqe->sgl[%d] = %d\n",
 257            sge_len - 1, le16_to_cpu(fp_cqe->sgl_or_raw_data.sgl[sge_len - 1]));
 258
 259         /* Here we assume that the last SGE index is the biggest */
 260         prefetch((void *)(fp->sge_mask));
 261         bnx2x_update_last_max_sge(fp,
 262                 le16_to_cpu(fp_cqe->sgl_or_raw_data.sgl[sge_len - 1]));
 263
 264         last_max = RX_SGE(fp->last_max_sge);
 265         last_elem = last_max >> BIT_VEC64_ELEM_SHIFT;
 266         first_elem = RX_SGE(fp->rx_sge_prod) >> BIT_VEC64_ELEM_SHIFT;
 267
 268         /* If ring is not full */
 269         if (last_elem + 1 != first_elem)
 270                 last_elem++;
 271
 272         /* Now update the prod */
 273         for (i = first_elem; i != last_elem; i = NEXT_SGE_MASK_ELEM(i)) {
 274                 if (likely(fp->sge_mask[i]))
 275                         break;
 276
 277                 fp->sge_mask[i] = BIT_VEC64_ELEM_ONE_MASK;
 278                 delta += BIT_VEC64_ELEM_SZ;
 279         }
 280
 281         if (delta > 0) {
 282                 fp->rx_sge_prod += delta;
 283                 /* clear page-end entries */
 284                 bnx2x_clear_sge_mask_next_elems(fp);
 285         }
 286
 287         DP(NETIF_MSG_RX_STATUS,
 288            "fp->last_max_sge = %d  fp->rx_sge_prod = %d\n",
 289            fp->last_max_sge, fp->rx_sge_prod);
 290 }
 291
 292 static void bnx2x_tpa_start(struct bnx2x_fastpath *fp, u16 queue,
 293                             struct sk_buff *skb, u16 cons, u16 prod,
 294                             struct eth_fast_path_rx_cqe *cqe)
 295 {
 296         struct bnx2x *bp = fp->bp;
 297         struct sw_rx_bd *cons_rx_buf = &fp->rx_buf_ring[cons];
 298         struct sw_rx_bd *prod_rx_buf = &fp->rx_buf_ring[prod];
 299         struct eth_rx_bd *prod_bd = &fp->rx_desc_ring[prod];
 300         dma_addr_t mapping;
 301         struct bnx2x_agg_info *tpa_info = &fp->tpa_info[queue];
 302         struct sw_rx_bd *first_buf = &tpa_info->first_buf;
 303
 304         /* print error if current state != stop */
 305         if (tpa_info->tpa_state != BNX2X_TPA_STOP)
 306                 BNX2X_ERR("start of bin not in stop [%d]\n", queue);
 307
 308         /* Try to map an empty skb from the aggregation info  */
 309         mapping = dma_map_single(&bp->pdev->dev,
 310                                  first_buf->skb->data,
 311                                  fp->rx_buf_size, DMA_FROM_DEVICE);
 312         /*
 313          *  ...if it fails - move the skb from the consumer to the producer
 314          *  and set the current aggregation state as ERROR to drop it
 315          *  when TPA_STOP arrives.
 316          */
 317
 318         if (unlikely(dma_mapping_error(&bp->pdev->dev, mapping))) {
 319                 /* Move the BD from the consumer to the producer */
 320                 bnx2x_reuse_rx_skb(fp, cons, prod);
 321                 tpa_info->tpa_state = BNX2X_TPA_ERROR;
 322                 return;
 323         }
 324
 325         /* move empty skb from pool to prod */
 326         prod_rx_buf->skb = first_buf->skb;
 327         dma_unmap_addr_set(prod_rx_buf, mapping, mapping);
 328         /* point prod_bd to new skb */
 329         prod_bd->addr_hi = cpu_to_le32(U64_HI(mapping));
 330         prod_bd->addr_lo = cpu_to_le32(U64_LO(mapping));
 331
 332         /* move partial skb from cons to pool (don't unmap yet) */
 333         *first_buf = *cons_rx_buf;
 334
 335         /* mark bin state as START */
 336         tpa_info->parsing_flags =
 337                 le16_to_cpu(cqe->pars_flags.flags);
 338         tpa_info->vlan_tag = le16_to_cpu(cqe->vlan_tag);
 339         tpa_info->tpa_state = BNX2X_TPA_START;
 340         tpa_info->len_on_bd = le16_to_cpu(cqe->len_on_bd);
 341         tpa_info->placement_offset = cqe->placement_offset;
 342
 343 #ifdef BNX2X_STOP_ON_ERROR
 344         fp->tpa_queue_used |= (1 << queue);
 345 #ifdef _ASM_GENERIC_INT_L64_H
 346         DP(NETIF_MSG_RX_STATUS, "fp->tpa_queue_used = 0x%lx\n",
 347 #else
 348         DP(NETIF_MSG_RX_STATUS, "fp->tpa_queue_used = 0x%llx\n",
 349 #endif
 350            fp->tpa_queue_used);
 351 #endif
 352 }
 353
 354 /* Timestamp option length allowed for TPA aggregation:
 355  *
 356  *              nop nop kind length echo val
 357  */
 358 #define TPA_TSTAMP_OPT_LEN      12
 359 /**
 360  * bnx2x_set_lro_mss - calculate the approximate value of the MSS
 361  *
 362  * @bp:                 driver handle
 363  * @parsing_flags:      parsing flags from the START CQE
 364  * @len_on_bd:          total length of the first packet for the
 365  *                      aggregation.
 366  *
 367  * Approximate value of the MSS for this aggregation calculated using
 368  * the first packet of it.
 369  */
 370 static inline u16 bnx2x_set_lro_mss(struct bnx2x *bp, u16 parsing_flags,
 371                                     u16 len_on_bd)
 372 {
 373         /*
 374          * TPA arrgregation won't have either IP options or TCP options
 375          * other than timestamp or IPv6 extension headers.
 376          */
 377         u16 hdrs_len = ETH_HLEN + sizeof(struct tcphdr);
 378
 379         if (GET_FLAG(parsing_flags, PARSING_FLAGS_OVER_ETHERNET_PROTOCOL) ==
 380             PRS_FLAG_OVERETH_IPV6)
 381                 hdrs_len += sizeof(struct ipv6hdr);
 382         else /* IPv4 */
 383                 hdrs_len += sizeof(struct iphdr);
 384
 385
 386         /* Check if there was a TCP timestamp, if there is it's will
 387          * always be 12 bytes length: nop nop kind length echo val.
 388          *
 389          * Otherwise FW would close the aggregation.
 390          */
 391         if (parsing_flags & PARSING_FLAGS_TIME_STAMP_EXIST_FLAG)
 392                 hdrs_len += TPA_TSTAMP_OPT_LEN;
 393
 394         return len_on_bd - hdrs_len;
 395 }
 396
 397 static int bnx2x_fill_frag_skb(struct bnx2x *bp, struct bnx2x_fastpath *fp,
 398                                u16 queue, struct sk_buff *skb,
 399                                struct eth_end_agg_rx_cqe *cqe,
 400                                u16 cqe_idx)
 401 {
 402         struct sw_rx_page *rx_pg, old_rx_pg;
 403         u32 i, frag_len, frag_size, pages;
 404         int err;
 405         int j;
 406         struct bnx2x_agg_info *tpa_info = &fp->tpa_info[queue];
 407         u16 len_on_bd = tpa_info->len_on_bd;
 408
 409         frag_size = le16_to_cpu(cqe->pkt_len) - len_on_bd;
 410         pages = SGE_PAGE_ALIGN(frag_size) >> SGE_PAGE_SHIFT;
 411
 412         /* This is needed in order to enable forwarding support */
 413         if (frag_size)
 414                 skb_shinfo(skb)->gso_size = bnx2x_set_lro_mss(bp,
 415                                         tpa_info->parsing_flags, len_on_bd);
 416
 417 #ifdef BNX2X_STOP_ON_ERROR
 418         if (pages > min_t(u32, 8, MAX_SKB_FRAGS)*SGE_PAGE_SIZE*PAGES_PER_SGE) {
 419                 BNX2X_ERR("SGL length is too long: %d. CQE index is %d\n",
 420                           pages, cqe_idx);
 421                 BNX2X_ERR("cqe->pkt_len = %d\n", cqe->pkt_len);
 422                 bnx2x_panic();
 423                 return -EINVAL;
 424         }
 425 #endif
 426
 427         /* Run through the SGL and compose the fragmented skb */
 428         for (i = 0, j = 0; i < pages; i += PAGES_PER_SGE, j++) {
 429                 u16 sge_idx = RX_SGE(le16_to_cpu(cqe->sgl_or_raw_data.sgl[j]));
 430
 431                 /* FW gives the indices of the SGE as if the ring is an array
 432                    (meaning that "next" element will consume 2 indices) */
 433                 frag_len = min(frag_size, (u32)(SGE_PAGE_SIZE*PAGES_PER_SGE));
 434                 rx_pg = &fp->rx_page_ring[sge_idx];
 435                 old_rx_pg = *rx_pg;
 436
 437                 /* If we fail to allocate a substitute page, we simply stop
 438                    where we are and drop the whole packet */
 439                 err = bnx2x_alloc_rx_sge(bp, fp, sge_idx);
 440                 if (unlikely(err)) {
 441                         fp->eth_q_stats.rx_skb_alloc_failed++;
 442                         return err;
 443                 }
 444
 445                 /* Unmap the page as we r going to pass it to the stack */
 446                 dma_unmap_page(&bp->pdev->dev,
 447                                dma_unmap_addr(&old_rx_pg, mapping),
 448                                SGE_PAGE_SIZE*PAGES_PER_SGE, DMA_FROM_DEVICE);
 449
 450                 /* Add one frag and update the appropriate fields in the skb */
 451                 skb_fill_page_desc(skb, j, old_rx_pg.page, 0, frag_len);
 452
 453                 skb->data_len += frag_len;
 454                 skb->truesize += frag_len;
 455                 skb->len += frag_len;
 456
 457                 frag_size -= frag_len;
 458         }
 459
 460         return 0;
 461 }
 462
 463 static void bnx2x_tpa_stop(struct bnx2x *bp, struct bnx2x_fastpath *fp,
 464                            u16 queue, struct eth_end_agg_rx_cqe *cqe,
 465                            u16 cqe_idx)
 466 {
 467         struct bnx2x_agg_info *tpa_info = &fp->tpa_info[queue];
 468         struct sw_rx_bd *rx_buf = &tpa_info->first_buf;
 469         u8 pad = tpa_info->placement_offset;
 470         u16 len = tpa_info->len_on_bd;
 471         struct sk_buff *skb = rx_buf->skb;
 472         /* alloc new skb */
 473         struct sk_buff *new_skb;
 474         u8 old_tpa_state = tpa_info->tpa_state;
 475
 476         tpa_info->tpa_state = BNX2X_TPA_STOP;
 477
 478         /* If we there was an error during the handling of the TPA_START -
 479          * drop this aggregation.
 480          */
 481         if (old_tpa_state == BNX2X_TPA_ERROR)
 482                 goto drop;
 483
 484         /* Try to allocate the new skb */
 485         new_skb = netdev_alloc_skb(bp->dev, fp->rx_buf_size);
 486
 487         /* Unmap skb in the pool anyway, as we are going to change
 488            pool entry status to BNX2X_TPA_STOP even if new skb allocation
 489            fails. */
 490         dma_unmap_single(&bp->pdev->dev, dma_unmap_addr(rx_buf, mapping),
 491                          fp->rx_buf_size, DMA_FROM_DEVICE);
 492
 493         if (likely(new_skb)) {
 494                 prefetch(skb);
 495                 prefetch(((char *)(skb)) + L1_CACHE_BYTES);
 496
 497 #ifdef BNX2X_STOP_ON_ERROR
 498                 if (pad + len > fp->rx_buf_size) {
 499                         BNX2X_ERR("skb_put is about to fail...  "
 500                                   "pad %d  len %d  rx_buf_size %d\n",
 501                                   pad, len, fp->rx_buf_size);
 502                         bnx2x_panic();
 503                         return;
 504                 }
 505 #endif
 506
 507                 skb_reserve(skb, pad);
 508                 skb_put(skb, len);
 509
 510                 skb->protocol = eth_type_trans(skb, bp->dev);
 511                 skb->ip_summed = CHECKSUM_UNNECESSARY;
 512
 513                 if (!bnx2x_fill_frag_skb(bp, fp, queue, skb, cqe, cqe_idx)) {
 514                         if (tpa_info->parsing_flags & PARSING_FLAGS_VLAN)
 515                                 __vlan_hwaccel_put_tag(skb, tpa_info->vlan_tag);
 516                         napi_gro_receive(&fp->napi, skb);
 517                 } else {
 518                         DP(NETIF_MSG_RX_STATUS, "Failed to allocate new pages"
 519                            " - dropping packet!\n");
 520                         dev_kfree_skb_any(skb);
 521                 }
 522
 523
 524                 /* put new skb in bin */
 525                 rx_buf->skb = new_skb;
 526
 527                 return;
 528         }
 529
 530 drop:
 531         /* drop the packet and keep the buffer in the bin */
 532         DP(NETIF_MSG_RX_STATUS,
 533            "Failed to allocate or map a new skb - dropping packet!\n");
 534         fp->eth_q_stats.rx_skb_alloc_failed++;
 535 }
 536
 537 /* Set Toeplitz hash value in the skb using the value from the
 538  * CQE (calculated by HW).
 539  */
 540 static inline void bnx2x_set_skb_rxhash(struct bnx2x *bp, union eth_rx_cqe *cqe,
 541                                         struct sk_buff *skb)
 542 {
 543         /* Set Toeplitz hash from CQE */
 544         if ((bp->dev->features & NETIF_F_RXHASH) &&
 545             (cqe->fast_path_cqe.status_flags &
 546              ETH_FAST_PATH_RX_CQE_RSS_HASH_FLG))
 547                 skb->rxhash =
 548                 le32_to_cpu(cqe->fast_path_cqe.rss_hash_result);
 549 }
 550
 551 int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget)
 552 {
 553         struct bnx2x *bp = fp->bp;
 554         u16 bd_cons, bd_prod, bd_prod_fw, comp_ring_cons;
 555         u16 hw_comp_cons, sw_comp_cons, sw_comp_prod;
 556         int rx_pkt = 0;
 557
 558 #ifdef BNX2X_STOP_ON_ERROR
 559         if (unlikely(bp->panic))
 560                 return 0;
 561 #endif
 562
 563         /* CQ "next element" is of the size of the regular element,
 564            that's why it's ok here */
 565         hw_comp_cons = le16_to_cpu(*fp->rx_cons_sb);
 566         if ((hw_comp_cons & MAX_RCQ_DESC_CNT) == MAX_RCQ_DESC_CNT)
 567                 hw_comp_cons++;
 568
 569         bd_cons = fp->rx_bd_cons;
 570         bd_prod = fp->rx_bd_prod;
 571         bd_prod_fw = bd_prod;
 572         sw_comp_cons = fp->rx_comp_cons;
 573         sw_comp_prod = fp->rx_comp_prod;
 574
 575         /* Memory barrier necessary as speculative reads of the rx
 576          * buffer can be ahead of the index in the status block
 577          */
 578         rmb();
 579
 580         DP(NETIF_MSG_RX_STATUS,
 581            "queue[%d]:  hw_comp_cons %u  sw_comp_cons %u\n",
 582            fp->index, hw_comp_cons, sw_comp_cons);
 583
 584         while (sw_comp_cons != hw_comp_cons) {
 585                 struct sw_rx_bd *rx_buf = NULL;
 586                 struct sk_buff *skb;
 587                 union eth_rx_cqe *cqe;
 588                 struct eth_fast_path_rx_cqe *cqe_fp;
 589                 u8 cqe_fp_flags;
 590                 enum eth_rx_cqe_type cqe_fp_type;
 591                 u16 len, pad;
 592
 593 #ifdef BNX2X_STOP_ON_ERROR
 594                 if (unlikely(bp->panic))
 595                         return 0;
 596 #endif
 597
 598                 comp_ring_cons = RCQ_BD(sw_comp_cons);
 599                 bd_prod = RX_BD(bd_prod);
 600                 bd_cons = RX_BD(bd_cons);
 601
 602                 /* Prefetch the page containing the BD descriptor
 603                    at producer's index. It will be needed when new skb is
 604                    allocated */
 605                 prefetch((void *)(PAGE_ALIGN((unsigned long)
 606                                              (&fp->rx_desc_ring[bd_prod])) -
 607                                   PAGE_SIZE + 1));
 608
 609                 cqe = &fp->rx_comp_ring[comp_ring_cons];
 610                 cqe_fp = &cqe->fast_path_cqe;
 611                 cqe_fp_flags = cqe_fp->type_error_flags;
 612                 cqe_fp_type = cqe_fp_flags & ETH_FAST_PATH_RX_CQE_TYPE;
 613
 614                 DP(NETIF_MSG_RX_STATUS, "CQE type %x  err %x  status %x"
 615                    "  queue %x  vlan %x  len %u\n", CQE_TYPE(cqe_fp_flags),
 616                    cqe_fp_flags, cqe_fp->status_flags,
 617                    le32_to_cpu(cqe_fp->rss_hash_result),
 618                    le16_to_cpu(cqe_fp->vlan_tag), le16_to_cpu(cqe_fp->pkt_len));
 619
 620                 /* is this a slowpath msg? */
 621                 if (unlikely(CQE_TYPE_SLOW(cqe_fp_type))) {
 622                         bnx2x_sp_event(fp, cqe);
 623                         goto next_cqe;
 624
 625                 /* this is an rx packet */
 626                 } else {
 627                         rx_buf = &fp->rx_buf_ring[bd_cons];
 628                         skb = rx_buf->skb;
 629                         prefetch(skb);
 630
 631                         if (!CQE_TYPE_FAST(cqe_fp_type)) {
 632 #ifdef BNX2X_STOP_ON_ERROR
 633                                 /* sanity check */
 634                                 if (fp->disable_tpa &&
 635                                     (CQE_TYPE_START(cqe_fp_type) ||
 636                                      CQE_TYPE_STOP(cqe_fp_type)))
 637                                         BNX2X_ERR("START/STOP packet while "
 638                                                   "disable_tpa type %x\n",
 639                                                   CQE_TYPE(cqe_fp_type));
 640 #endif
 641
 642                                 if (CQE_TYPE_START(cqe_fp_type)) {
 643                                         u16 queue = cqe_fp->queue_index;
 644                                         DP(NETIF_MSG_RX_STATUS,
 645                                            "calling tpa_start on queue %d\n",
 646                                            queue);
 647
 648                                         bnx2x_tpa_start(fp, queue, skb,
 649                                                         bd_cons, bd_prod,
 650                                                         cqe_fp);
 651
 652                                         /* Set Toeplitz hash for LRO skb */
 653                                         bnx2x_set_skb_rxhash(bp, cqe, skb);
 654
 655                                         goto next_rx;
 656
 657                                 } else {
 658                                         u16 queue =
 659                                                 cqe->end_agg_cqe.queue_index;
 660                                         DP(NETIF_MSG_RX_STATUS,
 661                                            "calling tpa_stop on queue %d\n",
 662                                            queue);
 663
 664                                         bnx2x_tpa_stop(bp, fp, queue,
 665                                                        &cqe->end_agg_cqe,
 666                                                        comp_ring_cons);
 667 #ifdef BNX2X_STOP_ON_ERROR
 668                                         if (bp->panic)
 669                                                 return 0;
 670 #endif
 671
 672                                         bnx2x_update_sge_prod(fp, cqe_fp);
 673                                         goto next_cqe;
 674                                 }
 675                         }
 676                         /* non TPA */
 677                         len = le16_to_cpu(cqe_fp->pkt_len);
 678                         pad = cqe_fp->placement_offset;
 679                         dma_sync_single_for_device(&bp->pdev->dev,
 680                                         dma_unmap_addr(rx_buf, mapping),
 681                                                        pad + RX_COPY_THRESH,
 682                                                        DMA_FROM_DEVICE);
 683                         prefetch(((char *)(skb)) + L1_CACHE_BYTES);
 684
 685                         /* is this an error packet? */
 686                         if (unlikely(cqe_fp_flags & ETH_RX_ERROR_FALGS)) {
 687                                 DP(NETIF_MSG_RX_ERR,
 688                                    "ERROR  flags %x  rx packet %u\n",
 689                                    cqe_fp_flags, sw_comp_cons);
 690                                 fp->eth_q_stats.rx_err_discard_pkt++;
 691                                 goto reuse_rx;
 692                         }
 693
 694                         /* Since we don't have a jumbo ring
 695                          * copy small packets if mtu > 1500
 696                          */
 697                         if ((bp->dev->mtu > ETH_MAX_PACKET_SIZE) &&
 698                             (len <= RX_COPY_THRESH)) {
 699                                 struct sk_buff *new_skb;
 700
 701                                 new_skb = netdev_alloc_skb(bp->dev, len + pad);
 702                                 if (new_skb == NULL) {
 703                                         DP(NETIF_MSG_RX_ERR,
 704                                            "ERROR  packet dropped "
 705                                            "because of alloc failure\n");
 706                                         fp->eth_q_stats.rx_skb_alloc_failed++;
 707                                         goto reuse_rx;
 708                                 }
 709
 710                                 /* aligned copy */
 711                                 skb_copy_from_linear_data_offset(skb, pad,
 712                                                     new_skb->data + pad, len);
 713                                 skb_reserve(new_skb, pad);
 714                                 skb_put(new_skb, len);
 715
 716                                 bnx2x_reuse_rx_skb(fp, bd_cons, bd_prod);
 717
 718                                 skb = new_skb;
 719
 720                         } else
 721                         if (likely(bnx2x_alloc_rx_skb(bp, fp, bd_prod) == 0)) {
 722                                 dma_unmap_single(&bp->pdev->dev,
 723                                         dma_unmap_addr(rx_buf, mapping),
 724                                                  fp->rx_buf_size,
 725                                                  DMA_FROM_DEVICE);
 726                                 skb_reserve(skb, pad);
 727                                 skb_put(skb, len);
 728
 729                         } else {
 730                                 DP(NETIF_MSG_RX_ERR,
 731                                    "ERROR  packet dropped because "
 732                                    "of alloc failure\n");
 733                                 fp->eth_q_stats.rx_skb_alloc_failed++;
 734 reuse_rx:
 735                                 bnx2x_reuse_rx_skb(fp, bd_cons, bd_prod);
 736                                 goto next_rx;
 737                         }
 738
 739                         skb->protocol = eth_type_trans(skb, bp->dev);
 740
 741                         /* Set Toeplitz hash for a none-LRO skb */
 742                         bnx2x_set_skb_rxhash(bp, cqe, skb);
 743
 744                         skb_checksum_none_assert(skb);
 745
 746                         if (bp->dev->features & NETIF_F_RXCSUM) {
 747
 748                                 if (likely(BNX2X_RX_CSUM_OK(cqe)))
 749                                         skb->ip_summed = CHECKSUM_UNNECESSARY;
 750                                 else
 751                                         fp->eth_q_stats.hw_csum_err++;
 752                         }
 753                 }
 754
 755                 skb_record_rx_queue(skb, fp->index);
 756
 757                 if (le16_to_cpu(cqe_fp->pars_flags.flags) &
 758                     PARSING_FLAGS_VLAN)
 759                         __vlan_hwaccel_put_tag(skb,
 760                                                le16_to_cpu(cqe_fp->vlan_tag));
 761                 napi_gro_receive(&fp->napi, skb);
 762
 763
 764 next_rx:
 765                 rx_buf->skb = NULL;
 766
 767                 bd_cons = NEXT_RX_IDX(bd_cons);
 768                 bd_prod = NEXT_RX_IDX(bd_prod);
 769                 bd_prod_fw = NEXT_RX_IDX(bd_prod_fw);
 770                 rx_pkt++;
 771 next_cqe:
 772                 sw_comp_prod = NEXT_RCQ_IDX(sw_comp_prod);
 773                 sw_comp_cons = NEXT_RCQ_IDX(sw_comp_cons);
 774
 775                 if (rx_pkt == budget)
 776                         break;
 777         } /* while */
 778
 779         fp->rx_bd_cons = bd_cons;
 780         fp->rx_bd_prod = bd_prod_fw;
 781         fp->rx_comp_cons = sw_comp_cons;
 782         fp->rx_comp_prod = sw_comp_prod;
 783
 784         /* Update producers */
 785         bnx2x_update_rx_prod(bp, fp, bd_prod_fw, sw_comp_prod,
 786                              fp->rx_sge_prod);
 787
 788         fp->rx_pkt += rx_pkt;
 789         fp->rx_calls++;
 790
 791         return rx_pkt;
 792 }
 793
 794 static irqreturn_t bnx2x_msix_fp_int(int irq, void *fp_cookie)
 795 {
 796         struct bnx2x_fastpath *fp = fp_cookie;
 797         struct bnx2x *bp = fp->bp;
 798         u8 cos;
 799
 800         DP(BNX2X_MSG_FP, "got an MSI-X interrupt on IDX:SB "
 801                          "[fp %d fw_sd %d igusb %d]\n",
 802            fp->index, fp->fw_sb_id, fp->igu_sb_id);
 803         bnx2x_ack_sb(bp, fp->igu_sb_id, USTORM_ID, 0, IGU_INT_DISABLE, 0);
 804
 805 #ifdef BNX2X_STOP_ON_ERROR
 806         if (unlikely(bp->panic))
 807                 return IRQ_HANDLED;
 808 #endif
 809
 810         /* Handle Rx and Tx according to MSI-X vector */
 811         prefetch(fp->rx_cons_sb);
 812
 813         for_each_cos_in_tx_queue(fp, cos)
 814                 prefetch(fp->txdata[cos].tx_cons_sb);
 815
 816         prefetch(&fp->sb_running_index[SM_RX_ID]);
 817         napi_schedule(&bnx2x_fp(bp, fp->index, napi));
 818
 819         return IRQ_HANDLED;
 820 }
 821
 822 /* HW Lock for shared dual port PHYs */
 823 void bnx2x_acquire_phy_lock(struct bnx2x *bp)
 824 {
 825         mutex_lock(&bp->port.phy_mutex);
 826
 827         if (bp->port.need_hw_lock)
 828                 bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_MDIO);
 829 }
 830
 831 void bnx2x_release_phy_lock(struct bnx2x *bp)
 832 {
 833         if (bp->port.need_hw_lock)
 834                 bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_MDIO);
 835
 836         mutex_unlock(&bp->port.phy_mutex);
 837 }
 838
 839 /* calculates MF speed according to current linespeed and MF configuration */
 840 u16 bnx2x_get_mf_speed(struct bnx2x *bp)
 841 {
 842         u16 line_speed = bp->link_vars.line_speed;
 843         if (IS_MF(bp)) {
 844                 u16 maxCfg = bnx2x_extract_max_cfg(bp,
 845                                                    bp->mf_config[BP_VN(bp)]);
 846
 847                 /* Calculate the current MAX line speed limit for the MF
 848                  * devices
 849                  */
 850                 if (IS_MF_SI(bp))
 851                         line_speed = (line_speed * maxCfg) / 100;
 852                 else { /* SD mode */
 853                         u16 vn_max_rate = maxCfg * 100;
 854
 855                         if (vn_max_rate < line_speed)
 856                                 line_speed = vn_max_rate;
 857                 }
 858         }
 859
 860         return line_speed;
 861 }
 862
 863 /**
 864  * bnx2x_fill_report_data - fill link report data to report
 865  *
 866  * @bp:         driver handle
 867  * @data:       link state to update
 868  *
 869  * It uses a none-atomic bit operations because is called under the mutex.
 870  */
 871 static inline void bnx2x_fill_report_data(struct bnx2x *bp,
 872                                           struct bnx2x_link_report_data *data)
 873 {
 874         u16 line_speed = bnx2x_get_mf_speed(bp);
 875
 876         memset(data, 0, sizeof(*data));
 877
 878         /* Fill the report data: efective line speed */
 879         data->line_speed = line_speed;
 880
 881         /* Link is down */
 882         if (!bp->link_vars.link_up || (bp->flags & MF_FUNC_DIS))
 883                 __set_bit(BNX2X_LINK_REPORT_LINK_DOWN,
 884                           &data->link_report_flags);
 885
 886         /* Full DUPLEX */
 887         if (bp->link_vars.duplex == DUPLEX_FULL)
 888                 __set_bit(BNX2X_LINK_REPORT_FD, &data->link_report_flags);
 889
 890         /* Rx Flow Control is ON */
 891         if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_RX)
 892                 __set_bit(BNX2X_LINK_REPORT_RX_FC_ON, &data->link_report_flags);
 893
 894         /* Tx Flow Control is ON */
 895         if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_TX)
 896                 __set_bit(BNX2X_LINK_REPORT_TX_FC_ON, &data->link_report_flags);
 897 }
 898
 899 /**
 900  * bnx2x_link_report - report link status to OS.
 901  *
 902  * @bp:         driver handle
 903  *
 904  * Calls the __bnx2x_link_report() under the same locking scheme
 905  * as a link/PHY state managing code to ensure a consistent link
 906  * reporting.
 907  */
 908
 909 void bnx2x_link_report(struct bnx2x *bp)
 910 {
 911         bnx2x_acquire_phy_lock(bp);
 912         __bnx2x_link_report(bp);
 913         bnx2x_release_phy_lock(bp);
 914 }
 915
 916 /**
 917  * __bnx2x_link_report - report link status to OS.
 918  *
 919  * @bp:         driver handle
 920  *
 921  * None atomic inmlementation.
 922  * Should be called under the phy_lock.
 923  */
 924 void __bnx2x_link_report(struct bnx2x *bp)
 925 {
 926         struct bnx2x_link_report_data cur_data;
 927
 928         /* reread mf_cfg */
 929         if (!CHIP_IS_E1(bp))
 930                 bnx2x_read_mf_cfg(bp);
 931
 932         /* Read the current link report info */
 933         bnx2x_fill_report_data(bp, &cur_data);
 934
 935         /* Don't report link down or exactly the same link status twice */
 936         if (!memcmp(&cur_data, &bp->last_reported_link, sizeof(cur_data)) ||
 937             (test_bit(BNX2X_LINK_REPORT_LINK_DOWN,
 938                       &bp->last_reported_link.link_report_flags) &&
 939              test_bit(BNX2X_LINK_REPORT_LINK_DOWN,
 940                       &cur_data.link_report_flags)))
 941                 return;
 942
 943         bp->link_cnt++;
 944
 945         /* We are going to report a new link parameters now -
 946          * remember the current data for the next time.
 947          */
 948         memcpy(&bp->last_reported_link, &cur_data, sizeof(cur_data));
 949
 950         if (test_bit(BNX2X_LINK_REPORT_LINK_DOWN,
 951                      &cur_data.link_report_flags)) {
 952                 netif_carrier_off(bp->dev);
 953                 netdev_err(bp->dev, "NIC Link is Down\n");
 954                 return;
 955         } else {
 956                 netif_carrier_on(bp->dev);
 957                 netdev_info(bp->dev, "NIC Link is Up, ");
 958                 pr_cont("%d Mbps ", cur_data.line_speed);
 959
 960                 if (test_and_clear_bit(BNX2X_LINK_REPORT_FD,
 961                                        &cur_data.link_report_flags))
 962                         pr_cont("full duplex");
 963                 else
 964                         pr_cont("half duplex");
 965
 966                 /* Handle the FC at the end so that only these flags would be
 967                  * possibly set. This way we may easily check if there is no FC
 968                  * enabled.
 969                  */
 970                 if (cur_data.link_report_flags) {
 971                         if (test_bit(BNX2X_LINK_REPORT_RX_FC_ON,
 972                                      &cur_data.link_report_flags)) {
 973                                 pr_cont(", receive ");
 974                                 if (test_bit(BNX2X_LINK_REPORT_TX_FC_ON,
 975                                      &cur_data.link_report_flags))
 976                                         pr_cont("& transmit ");
 977                         } else {
 978                                 pr_cont(", transmit ");
 979                         }
 980                         pr_cont("flow control ON");
 981                 }
 982                 pr_cont("\n");
 983         }
 984 }
 985
 986 void bnx2x_init_rx_rings(struct bnx2x *bp)
 987 {
 988         int func = BP_FUNC(bp);
 989         int max_agg_queues = CHIP_IS_E1(bp) ? ETH_MAX_AGGREGATION_QUEUES_E1 :
 990                                               ETH_MAX_AGGREGATION_QUEUES_E1H_E2;
 991         u16 ring_prod;
 992         int i, j;
 993
 994         /* Allocate TPA resources */
 995         for_each_rx_queue(bp, j) {
 996                 struct bnx2x_fastpath *fp = &bp->fp[j];
 997
 998                 DP(NETIF_MSG_IFUP,
 999                    "mtu %d  rx_buf_size %d\n", bp->dev->mtu, fp->rx_buf_size);
1000
1001                 if (!fp->disable_tpa) {
1002                         /* Fill the per-aggregtion pool */
1003                         for (i = 0; i < max_agg_queues; i++) {
1004                                 struct bnx2x_agg_info *tpa_info =
1005                                         &fp->tpa_info[i];
1006                                 struct sw_rx_bd *first_buf =
1007                                         &tpa_info->first_buf;
1008
1009                                 first_buf->skb = netdev_alloc_skb(bp->dev,
1010                                                        fp->rx_buf_size);
1011                                 if (!first_buf->skb) {
1012                                         BNX2X_ERR("Failed to allocate TPA "
1013                                                   "skb pool for queue[%d] - "
1014                                                   "disabling TPA on this "
1015                                                   "queue!\n", j);
1016                                         bnx2x_free_tpa_pool(bp, fp, i);
1017                                         fp->disable_tpa = 1;
1018                                         break;
1019                                 }
1020                                 dma_unmap_addr_set(first_buf, mapping, 0);
1021                                 tpa_info->tpa_state = BNX2X_TPA_STOP;
1022                         }
1023
1024                         /* "next page" elements initialization */
1025                         bnx2x_set_next_page_sgl(fp);
1026
1027                         /* set SGEs bit mask */
1028                         bnx2x_init_sge_ring_bit_mask(fp);
1029
1030                         /* Allocate SGEs and initialize the ring elements */
1031                         for (i = 0, ring_prod = 0;
1032                              i < MAX_RX_SGE_CNT*NUM_RX_SGE_PAGES; i++) {
1033
1034                                 if (bnx2x_alloc_rx_sge(bp, fp, ring_prod) < 0) {
1035                                         BNX2X_ERR("was only able to allocate "
1036                                                   "%d rx sges\n", i);
1037                                         BNX2X_ERR("disabling TPA for "
1038                                                   "queue[%d]\n", j);
1039                                         /* Cleanup already allocated elements */
1040                                         bnx2x_free_rx_sge_range(bp, fp,
1041                                                                 ring_prod);
1042                                         bnx2x_free_tpa_pool(bp, fp,
1043                                                             max_agg_queues);
1044                                         fp->disable_tpa = 1;
1045                                         ring_prod = 0;
1046                                         break;
1047                                 }
1048                                 ring_prod = NEXT_SGE_IDX(ring_prod);
1049                         }
1050
1051                         fp->rx_sge_prod = ring_prod;
1052                 }
1053         }
1054
1055         for_each_rx_queue(bp, j) {
1056                 struct bnx2x_fastpath *fp = &bp->fp[j];
1057
1058                 fp->rx_bd_cons = 0;
1059
1060                 /* Activate BD ring */
1061                 /* Warning!
1062                  * this will generate an interrupt (to the TSTORM)
1063                  * must only be done after chip is initialized
1064                  */
1065                 bnx2x_update_rx_prod(bp, fp, fp->rx_bd_prod, fp->rx_comp_prod,
1066                                      fp->rx_sge_prod);
1067
1068                 if (j != 0)
1069                         continue;
1070
1071                 if (CHIP_IS_E1(bp)) {
1072                         REG_WR(bp, BAR_USTRORM_INTMEM +
1073                                USTORM_MEM_WORKAROUND_ADDRESS_OFFSET(func),
1074                                U64_LO(fp->rx_comp_mapping));
1075                         REG_WR(bp, BAR_USTRORM_INTMEM +
1076                                USTORM_MEM_WORKAROUND_ADDRESS_OFFSET(func) + 4,
1077                                U64_HI(fp->rx_comp_mapping));
1078                 }
1079         }
1080 }
1081
1082 static void bnx2x_free_tx_skbs(struct bnx2x *bp)
1083 {
1084         int i;
1085         u8 cos;
1086
1087         for_each_tx_queue(bp, i) {
1088                 struct bnx2x_fastpath *fp = &bp->fp[i];
1089                 for_each_cos_in_tx_queue(fp, cos) {
1090                         struct bnx2x_fp_txdata *txdata = &fp->txdata[cos];
1091
1092                         u16 bd_cons = txdata->tx_bd_cons;
1093                         u16 sw_prod = txdata->tx_pkt_prod;
1094                         u16 sw_cons = txdata->tx_pkt_cons;
1095
1096                         while (sw_cons != sw_prod) {
1097                                 bd_cons = bnx2x_free_tx_pkt(bp, txdata,
1098                                                             TX_BD(sw_cons));
1099                                 sw_cons++;
1100                         }
1101                 }
1102         }
1103 }
1104
1105 static void bnx2x_free_rx_bds(struct bnx2x_fastpath *fp)
1106 {
1107         struct bnx2x *bp = fp->bp;
1108         int i;
1109
1110         /* ring wasn't allocated */
1111         if (fp->rx_buf_ring == NULL)
1112                 return;
1113
1114         for (i = 0; i < NUM_RX_BD; i++) {
1115                 struct sw_rx_bd *rx_buf = &fp->rx_buf_ring[i];
1116                 struct sk_buff *skb = rx_buf->skb;
1117
1118                 if (skb == NULL)
1119                         continue;
1120                 dma_unmap_single(&bp->pdev->dev,
1121                                  dma_unmap_addr(rx_buf, mapping),
1122                                  fp->rx_buf_size, DMA_FROM_DEVICE);
1123
1124                 rx_buf->skb = NULL;
1125                 dev_kfree_skb(skb);
1126         }
1127 }
1128
1129 static void bnx2x_free_rx_skbs(struct bnx2x *bp)
1130 {
1131         int j;
1132
1133         for_each_rx_queue(bp, j) {
1134                 struct bnx2x_fastpath *fp = &bp->fp[j];
1135
1136                 bnx2x_free_rx_bds(fp);
1137
1138                 if (!fp->disable_tpa)
1139                         bnx2x_free_tpa_pool(bp, fp, CHIP_IS_E1(bp) ?
1140                                             ETH_MAX_AGGREGATION_QUEUES_E1 :
1141                                             ETH_MAX_AGGREGATION_QUEUES_E1H_E2);
1142         }
1143 }
1144
1145 void bnx2x_free_skbs(struct bnx2x *bp)
1146 {
1147         bnx2x_free_tx_skbs(bp);
1148         bnx2x_free_rx_skbs(bp);
1149 }
1150
1151 void bnx2x_update_max_mf_config(struct bnx2x *bp, u32 value)
1152 {
1153         /* load old values */
1154         u32 mf_cfg = bp->mf_config[BP_VN(bp)];
1155
1156         if (value != bnx2x_extract_max_cfg(bp, mf_cfg)) {
1157                 /* leave all but MAX value */
1158                 mf_cfg &= ~FUNC_MF_CFG_MAX_BW_MASK;
1159
1160                 /* set new MAX value */
1161                 mf_cfg |= (value << FUNC_MF_CFG_MAX_BW_SHIFT)
1162                                 & FUNC_MF_CFG_MAX_BW_MASK;
1163
1164                 bnx2x_fw_command(bp, DRV_MSG_CODE_SET_MF_BW, mf_cfg);
1165         }
1166 }
1167
1168 /**
1169  * bnx2x_free_msix_irqs - free previously requested MSI-X IRQ vectors
1170  *
1171  * @bp:         driver handle
1172  * @nvecs:      number of vectors to be released
1173  */
1174 static void bnx2x_free_msix_irqs(struct bnx2x *bp, int nvecs)
1175 {
1176         int i, offset = 0;
1177
1178         if (nvecs == offset)
1179                 return;
1180         free_irq(bp->msix_table[offset].vector, bp->dev);
1181         DP(NETIF_MSG_IFDOWN, "released sp irq (%d)\n",
1182            bp->msix_table[offset].vector);
1183         offset++;
1184 #ifdef BCM_CNIC
1185         if (nvecs == offset)
1186                 return;
1187         offset++;
1188 #endif
1189
1190         for_each_eth_queue(bp, i) {
1191                 if (nvecs == offset)
1192                         return;
1193                 DP(NETIF_MSG_IFDOWN, "about to release fp #%d->%d "
1194                    "irq\n", i, bp->msix_table[offset].vector);
1195
1196                 free_irq(bp->msix_table[offset++].vector, &bp->fp[i]);
1197         }
1198 }
1199
1200 void bnx2x_free_irq(struct bnx2x *bp)
1201 {
1202         if (bp->flags & USING_MSIX_FLAG)
1203                 bnx2x_free_msix_irqs(bp, BNX2X_NUM_ETH_QUEUES(bp) +
1204                                      CNIC_PRESENT + 1);
1205         else if (bp->flags & USING_MSI_FLAG)
1206                 free_irq(bp->pdev->irq, bp->dev);
1207         else
1208                 free_irq(bp->pdev->irq, bp->dev);
1209 }
1210
1211 int bnx2x_enable_msix(struct bnx2x *bp)
1212 {
1213         int msix_vec = 0, i, rc, req_cnt;
1214
1215         bp->msix_table[msix_vec].entry = msix_vec;
1216         DP(NETIF_MSG_IFUP, "msix_table[0].entry = %d (slowpath)\n",
1217            bp->msix_table[0].entry);
1218         msix_vec++;
1219
1220 #ifdef BCM_CNIC
1221         bp->msix_table[msix_vec].entry = msix_vec;
1222         DP(NETIF_MSG_IFUP, "msix_table[%d].entry = %d (CNIC)\n",
1223            bp->msix_table[msix_vec].entry, bp->msix_table[msix_vec].entry);
1224         msix_vec++;
1225 #endif
1226         /* We need separate vectors for ETH queues only (not FCoE) */
1227         for_each_eth_queue(bp, i) {
1228                 bp->msix_table[msix_vec].entry = msix_vec;
1229                 DP(NETIF_MSG_IFUP, "msix_table[%d].entry = %d "
1230                    "(fastpath #%u)\n", msix_vec, msix_vec, i);
1231                 msix_vec++;
1232         }
1233
1234         req_cnt = BNX2X_NUM_ETH_QUEUES(bp) + CNIC_PRESENT + 1;
1235
1236         rc = pci_enable_msix(bp->pdev, &bp->msix_table[0], req_cnt);
1237
1238         /*
1239          * reconfigure number of tx/rx queues according to available
1240          * MSI-X vectors
1241          */
1242         if (rc >= BNX2X_MIN_MSIX_VEC_CNT) {
1243                 /* how less vectors we will have? */
1244                 int diff = req_cnt - rc;
1245
1246                 DP(NETIF_MSG_IFUP,
1247                    "Trying to use less MSI-X vectors: %d\n", rc);
1248
1249                 rc = pci_enable_msix(bp->pdev, &bp->msix_table[0], rc);
1250
1251                 if (rc) {
1252                         DP(NETIF_MSG_IFUP,
1253                            "MSI-X is not attainable  rc %d\n", rc);
1254                         return rc;
1255                 }
1256                 /*
1257                  * decrease number of queues by number of unallocated entries
1258                  */
1259                 bp->num_queues -= diff;
1260
1261                 DP(NETIF_MSG_IFUP, "New queue configuration set: %d\n",
1262                                   bp->num_queues);
1263         } else if (rc) {
1264                 /* fall to INTx if not enough memory */
1265                 if (rc == -ENOMEM)
1266                         bp->flags |= DISABLE_MSI_FLAG;
1267                 DP(NETIF_MSG_IFUP, "MSI-X is not attainable  rc %d\n", rc);
1268                 return rc;
1269         }
1270
1271         bp->flags |= USING_MSIX_FLAG;
1272
1273         return 0;
1274 }
1275
1276 static int bnx2x_req_msix_irqs(struct bnx2x *bp)
1277 {
1278         int i, rc, offset = 0;
1279
1280         rc = request_irq(bp->msix_table[offset++].vector,
1281                          bnx2x_msix_sp_int, 0,
1282                          bp->dev->name, bp->dev);
1283         if (rc) {
1284                 BNX2X_ERR("request sp irq failed\n");
1285                 return -EBUSY;
1286         }
1287
1288 #ifdef BCM_CNIC
1289         offset++;
1290 #endif
1291         for_each_eth_queue(bp, i) {
1292                 struct bnx2x_fastpath *fp = &bp->fp[i];
1293                 snprintf(fp->name, sizeof(fp->name), "%s-fp-%d",
1294                          bp->dev->name, i);
1295
1296                 rc = request_irq(bp->msix_table[offset].vector,
1297                                  bnx2x_msix_fp_int, 0, fp->name, fp);
1298                 if (rc) {
1299                         BNX2X_ERR("request fp #%d irq (%d) failed  rc %d\n", i,
1300                               bp->msix_table[offset].vector, rc);
1301                         bnx2x_free_msix_irqs(bp, offset);
1302                         return -EBUSY;
1303                 }
1304
1305                 offset++;
1306         }
1307
1308         i = BNX2X_NUM_ETH_QUEUES(bp);
1309         offset = 1 + CNIC_PRESENT;
1310         netdev_info(bp->dev, "using MSI-X  IRQs: sp %d  fp[%d] %d"
1311                " ... fp[%d] %d\n",
1312                bp->msix_table[0].vector,
1313                0, bp->msix_table[offset].vector,
1314                i - 1, bp->msix_table[offset + i - 1].vector);
1315
1316         return 0;
1317 }
1318
1319 int bnx2x_enable_msi(struct bnx2x *bp)
1320 {
1321         int rc;
1322
1323         rc = pci_enable_msi(bp->pdev);
1324         if (rc) {
1325                 DP(NETIF_MSG_IFUP, "MSI is not attainable\n");
1326                 return -1;
1327         }
1328         bp->flags |= USING_MSI_FLAG;
1329
1330         return 0;
1331 }
1332
1333 static int bnx2x_req_irq(struct bnx2x *bp)
1334 {
1335         unsigned long flags;
1336         int rc;
1337
1338         if (bp->flags & USING_MSI_FLAG)
1339                 flags = 0;
1340         else
1341                 flags = IRQF_SHARED;
1342
1343         rc = request_irq(bp->pdev->irq, bnx2x_interrupt, flags,
1344                          bp->dev->name, bp->dev);
1345         return rc;
1346 }
1347
1348 static inline int bnx2x_setup_irqs(struct bnx2x *bp)
1349 {
1350         int rc = 0;
1351         if (bp->flags & USING_MSIX_FLAG) {
1352                 rc = bnx2x_req_msix_irqs(bp);
1353                 if (rc)
1354                         return rc;
1355         } else {
1356                 bnx2x_ack_int(bp);
1357                 rc = bnx2x_req_irq(bp);
1358                 if (rc) {
1359                         BNX2X_ERR("IRQ request failed  rc %d, aborting\n", rc);
1360                         return rc;
1361                 }
1362                 if (bp->flags & USING_MSI_FLAG) {
1363                         bp->dev->irq = bp->pdev->irq;
1364                         netdev_info(bp->dev, "using MSI  IRQ %d\n",
1365                                bp->pdev->irq);
1366                 }
1367         }
1368
1369         return 0;
1370 }
1371
1372 static inline void bnx2x_napi_enable(struct bnx2x *bp)
1373 {
1374         int i;
1375
1376         for_each_rx_queue(bp, i)
1377                 napi_enable(&bnx2x_fp(bp, i, napi));
1378 }
1379
1380 static inline void bnx2x_napi_disable(struct bnx2x *bp)
1381 {
1382         int i;
1383
1384         for_each_rx_queue(bp, i)
1385                 napi_disable(&bnx2x_fp(bp, i, napi));
1386 }
1387
1388 void bnx2x_netif_start(struct bnx2x *bp)
1389 {
1390         if (netif_running(bp->dev)) {
1391                 bnx2x_napi_enable(bp);
1392                 bnx2x_int_enable(bp);
1393                 if (bp->state == BNX2X_STATE_OPEN)
1394                         netif_tx_wake_all_queues(bp->dev);
1395         }
1396 }
1397
1398 void bnx2x_netif_stop(struct bnx2x *bp, int disable_hw)
1399 {
1400         bnx2x_int_disable_sync(bp, disable_hw);
1401         bnx2x_napi_disable(bp);
1402 }
1403
1404 u16 bnx2x_select_queue(struct net_device *dev, struct sk_buff *skb)
1405 {
1406         struct bnx2x *bp = netdev_priv(dev);
1407 #ifdef BCM_CNIC
1408         if (NO_FCOE(bp))
1409                 return skb_tx_hash(dev, skb);
1410         else {
1411                 struct ethhdr *hdr = (struct ethhdr *)skb->data;
1412                 u16 ether_type = ntohs(hdr->h_proto);
1413
1414                 /* Skip VLAN tag if present */
1415                 if (ether_type == ETH_P_8021Q) {
1416                         struct vlan_ethhdr *vhdr =
1417                                 (struct vlan_ethhdr *)skb->data;
1418
1419                         ether_type = ntohs(vhdr->h_vlan_encapsulated_proto);
1420                 }
1421
1422                 /* If ethertype is FCoE or FIP - use FCoE ring */
1423                 if ((ether_type == ETH_P_FCOE) || (ether_type == ETH_P_FIP))
1424                         return bnx2x_fcoe_tx(bp, txq_index);
1425         }
1426 #endif
1427         /* Select a none-FCoE queue:  if FCoE is enabled, exclude FCoE L2 ring
1428          */
1429         return __skb_tx_hash(dev, skb, BNX2X_NUM_ETH_QUEUES(bp));
1430 }
1431
1432 void bnx2x_set_num_queues(struct bnx2x *bp)
1433 {
1434         switch (bp->multi_mode) {
1435         case ETH_RSS_MODE_DISABLED:
1436                 bp->num_queues = 1;
1437                 break;
1438         case ETH_RSS_MODE_REGULAR:
1439                 bp->num_queues = bnx2x_calc_num_queues(bp);
1440                 break;
1441
1442         default:
1443                 bp->num_queues = 1;
1444                 break;
1445         }
1446
1447         /* Add special queues */
1448         bp->num_queues += NON_ETH_CONTEXT_USE;
1449 }
1450
1451 static inline int bnx2x_set_real_num_queues(struct bnx2x *bp)
1452 {
1453         int rc, tx, rx;
1454
1455         tx = MAX_TXQS_PER_COS * bp->max_cos;
1456         rx = BNX2X_NUM_ETH_QUEUES(bp);
1457
1458 /* account for fcoe queue */
1459 #ifdef BCM_CNIC
1460         if (!NO_FCOE(bp)) {
1461                 rx += FCOE_PRESENT;
1462                 tx += FCOE_PRESENT;
1463         }
1464 #endif
1465
1466         rc = netif_set_real_num_tx_queues(bp->dev, tx);
1467         if (rc) {
1468                 BNX2X_ERR("Failed to set real number of Tx queues: %d\n", rc);
1469                 return rc;
1470         }
1471         rc = netif_set_real_num_rx_queues(bp->dev, rx);
1472         if (rc) {
1473                 BNX2X_ERR("Failed to set real number of Rx queues: %d\n", rc);
1474                 return rc;
1475         }
1476
1477         DP(NETIF_MSG_DRV, "Setting real num queues to (tx, rx) (%d, %d)\n",
1478                           tx, rx);
1479
1480         return rc;
1481 }
1482
1483 static inline void bnx2x_set_rx_buf_size(struct bnx2x *bp)
1484 {
1485         int i;
1486
1487         for_each_queue(bp, i) {
1488                 struct bnx2x_fastpath *fp = &bp->fp[i];
1489
1490                 /* Always use a mini-jumbo MTU for the FCoE L2 ring */
1491                 if (IS_FCOE_IDX(i))
1492                         /*
1493                          * Although there are no IP frames expected to arrive to
1494                          * this ring we still want to add an
1495                          * IP_HEADER_ALIGNMENT_PADDING to prevent a buffer
1496                          * overrun attack.
1497                          */
1498                         fp->rx_buf_size =
1499                                 BNX2X_FCOE_MINI_JUMBO_MTU + ETH_OVREHEAD +
1500                                 BNX2X_FW_RX_ALIGN + IP_HEADER_ALIGNMENT_PADDING;
1501                 else
1502                         fp->rx_buf_size =
1503                                 bp->dev->mtu + ETH_OVREHEAD +
1504                                 BNX2X_FW_RX_ALIGN + IP_HEADER_ALIGNMENT_PADDING;
1505         }
1506 }
1507
1508 static inline int bnx2x_init_rss_pf(struct bnx2x *bp)
1509 {
1510         int i;
1511         u8 ind_table[T_ETH_INDIRECTION_TABLE_SIZE] = {0};
1512         u8 num_eth_queues = BNX2X_NUM_ETH_QUEUES(bp);
1513
1514         /*
1515          * Prepare the inital contents fo the indirection table if RSS is
1516          * enabled
1517          */
1518         if (bp->multi_mode != ETH_RSS_MODE_DISABLED) {
1519                 for (i = 0; i < sizeof(ind_table); i++)
1520                         ind_table[i] =
1521                                 bp->fp->cl_id + (i % num_eth_queues);
1522         }
1523
1524         /*
1525          * For 57710 and 57711 SEARCHER configuration (rss_keys) is
1526          * per-port, so if explicit configuration is needed , do it only
1527          * for a PMF.
1528          *
1529          * For 57712 and newer on the other hand it's a per-function
1530          * configuration.
1531          */
1532         return bnx2x_config_rss_pf(bp, ind_table,
1533                                    bp->port.pmf || !CHIP_IS_E1x(bp));
1534 }
1535
1536 int bnx2x_config_rss_pf(struct bnx2x *bp, u8 *ind_table, bool config_hash)
1537 {
1538         struct bnx2x_config_rss_params params = {0};
1539         int i;
1540
1541         /* Although RSS is meaningless when there is a single HW queue we
1542          * still need it enabled in order to have HW Rx hash generated.
1543          *
1544          * if (!is_eth_multi(bp))
1545          *      bp->multi_mode = ETH_RSS_MODE_DISABLED;
1546          */
1547
1548         params.rss_obj = &bp->rss_conf_obj;
1549
1550         __set_bit(RAMROD_COMP_WAIT, &params.ramrod_flags);
1551
1552         /* RSS mode */
1553         switch (bp->multi_mode) {
1554         case ETH_RSS_MODE_DISABLED:
1555                 __set_bit(BNX2X_RSS_MODE_DISABLED, &params.rss_flags);
1556                 break;
1557         case ETH_RSS_MODE_REGULAR:
1558                 __set_bit(BNX2X_RSS_MODE_REGULAR, &params.rss_flags);
1559                 break;
1560         case ETH_RSS_MODE_VLAN_PRI:
1561                 __set_bit(BNX2X_RSS_MODE_VLAN_PRI, &params.rss_flags);
1562                 break;
1563         case ETH_RSS_MODE_E1HOV_PRI:
1564                 __set_bit(BNX2X_RSS_MODE_E1HOV_PRI, &params.rss_flags);
1565                 break;
1566         case ETH_RSS_MODE_IP_DSCP:
1567                 __set_bit(BNX2X_RSS_MODE_IP_DSCP, &params.rss_flags);
1568                 break;
1569         default:
1570                 BNX2X_ERR("Unknown multi_mode: %d\n", bp->multi_mode);
1571                 return -EINVAL;
1572         }
1573
1574         /* If RSS is enabled */
1575         if (bp->multi_mode != ETH_RSS_MODE_DISABLED) {
1576                 /* RSS configuration */
1577                 __set_bit(BNX2X_RSS_IPV4, &params.rss_flags);
1578                 __set_bit(BNX2X_RSS_IPV4_TCP, &params.rss_flags);
1579                 __set_bit(BNX2X_RSS_IPV6, &params.rss_flags);
1580                 __set_bit(BNX2X_RSS_IPV6_TCP, &params.rss_flags);
1581
1582                 /* Hash bits */
1583                 params.rss_result_mask = MULTI_MASK;
1584
1585                 memcpy(params.ind_table, ind_table, sizeof(params.ind_table));
1586
1587                 if (config_hash) {
1588                         /* RSS keys */
1589                         for (i = 0; i < sizeof(params.rss_key) / 4; i++)
1590                                 params.rss_key[i] = random32();
1591
1592                         __set_bit(BNX2X_RSS_SET_SRCH, &params.rss_flags);
1593                 }
1594         }
1595
1596         return bnx2x_config_rss(bp, &params);
1597 }
1598
1599 static inline int bnx2x_init_hw(struct bnx2x *bp, u32 load_code)
1600 {
1601         struct bnx2x_func_state_params func_params = {0};
1602
1603         /* Prepare parameters for function state transitions */
1604         __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
1605
1606         func_params.f_obj = &bp->func_obj;
1607         func_params.cmd = BNX2X_F_CMD_HW_INIT;
1608
1609         func_params.params.hw_init.load_phase = load_code;
1610
1611         return bnx2x_func_state_change(bp, &func_params);
1612 }
1613
1614 /*
1615  * Cleans the object that have internal lists without sending
1616  * ramrods. Should be run when interrutps are disabled.
1617  */
1618 static void bnx2x_squeeze_objects(struct bnx2x *bp)
1619 {
1620         int rc;
1621         unsigned long ramrod_flags = 0, vlan_mac_flags = 0;
1622         struct bnx2x_mcast_ramrod_params rparam = {0};
1623         struct bnx2x_vlan_mac_obj *mac_obj = &bp->fp->mac_obj;
1624
1625         /***************** Cleanup MACs' object first *************************/
1626
1627         /* Wait for completion of requested */
1628         __set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
1629         /* Perform a dry cleanup */
1630         __set_bit(RAMROD_DRV_CLR_ONLY, &ramrod_flags);
1631
1632         /* Clean ETH primary MAC */
1633         __set_bit(BNX2X_ETH_MAC, &vlan_mac_flags);
1634         rc = mac_obj->delete_all(bp, &bp->fp->mac_obj, &vlan_mac_flags,
1635                                  &ramrod_flags);
1636         if (rc != 0)
1637                 BNX2X_ERR("Failed to clean ETH MACs: %d\n", rc);
1638
1639         /* Cleanup UC list */
1640         vlan_mac_flags = 0;
1641         __set_bit(BNX2X_UC_LIST_MAC, &vlan_mac_flags);
1642         rc = mac_obj->delete_all(bp, mac_obj, &vlan_mac_flags,
1643                                  &ramrod_flags);
1644         if (rc != 0)
1645                 BNX2X_ERR("Failed to clean UC list MACs: %d\n", rc);
1646
1647         /***************** Now clean mcast object *****************************/
1648         rparam.mcast_obj = &bp->mcast_obj;
1649         __set_bit(RAMROD_DRV_CLR_ONLY, &rparam.ramrod_flags);
1650
1651         /* Add a DEL command... */
1652         rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_DEL);
1653         if (rc < 0)
1654                 BNX2X_ERR("Failed to add a new DEL command to a multi-cast "
1655                           "object: %d\n", rc);
1656
1657         /* ...and wait until all pending commands are cleared */
1658         rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_CONT);
1659         while (rc != 0) {
1660                 if (rc < 0) {
1661                         BNX2X_ERR("Failed to clean multi-cast object: %d\n",
1662                                   rc);
1663                         return;
1664                 }
1665
1666                 rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_CONT);
1667         }
1668 }
1669
1670 #ifndef BNX2X_STOP_ON_ERROR
1671 #define LOAD_ERROR_EXIT(bp, label) \
1672         do { \
1673                 (bp)->state = BNX2X_STATE_ERROR; \
1674                 goto label; \
1675         } while (0)
1676 #else
1677 #define LOAD_ERROR_EXIT(bp, label) \
1678         do { \
1679                 (bp)->state = BNX2X_STATE_ERROR; \
1680                 (bp)->panic = 1; \
1681                 return -EBUSY; \
1682         } while (0)
1683 #endif
1684
1685 /* must be called with rtnl_lock */
1686 int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
1687 {
1688         int port = BP_PORT(bp);
1689         u32 load_code;
1690         int i, rc;
1691
1692 #ifdef BNX2X_STOP_ON_ERROR
1693         if (unlikely(bp->panic))
1694                 return -EPERM;
1695 #endif
1696
1697         bp->state = BNX2X_STATE_OPENING_WAIT4_LOAD;
1698
1699         /* Set the initial link reported state to link down */
1700         bnx2x_acquire_phy_lock(bp);
1701         memset(&bp->last_reported_link, 0, sizeof(bp->last_reported_link));
1702         __set_bit(BNX2X_LINK_REPORT_LINK_DOWN,
1703                 &bp->last_reported_link.link_report_flags);
1704         bnx2x_release_phy_lock(bp);
1705
1706         /* must be called before memory allocation and HW init */
1707         bnx2x_ilt_set_info(bp);
1708
1709         /*
1710          * Zero fastpath structures preserving invariants like napi, which are
1711          * allocated only once, fp index, max_cos, bp pointer.
1712          * Also set fp->disable_tpa.
1713          */
1714         for_each_queue(bp, i)
1715                 bnx2x_bz_fp(bp, i);
1716
1717
1718         /* Set the receive queues buffer size */
1719         bnx2x_set_rx_buf_size(bp);
1720
1721         if (bnx2x_alloc_mem(bp))
1722                 return -ENOMEM;
1723
1724         /* As long as bnx2x_alloc_mem() may possibly update
1725          * bp->num_queues, bnx2x_set_real_num_queues() should always
1726          * come after it.
1727          */
1728         rc = bnx2x_set_real_num_queues(bp);
1729         if (rc) {
1730                 BNX2X_ERR("Unable to set real_num_queues\n");
1731                 LOAD_ERROR_EXIT(bp, load_error0);
1732         }
1733
1734         /* configure multi cos mappings in kernel.
1735          * this configuration may be overriden by a multi class queue discipline
1736          * or by a dcbx negotiation result.
1737          */
1738         bnx2x_setup_tc(bp->dev, bp->max_cos);
1739
1740         bnx2x_napi_enable(bp);
1741
1742         /* Send LOAD_REQUEST command to MCP
1743          * Returns the type of LOAD command:
1744          * if it is the first port to be initialized
1745          * common blocks should be initialized, otherwise - not
1746          */
1747         if (!BP_NOMCP(bp)) {
1748                 load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ, 0);
1749                 if (!load_code) {
1750                         BNX2X_ERR("MCP response failure, aborting\n");
1751                         rc = -EBUSY;
1752                         LOAD_ERROR_EXIT(bp, load_error1);
1753                 }
1754                 if (load_code == FW_MSG_CODE_DRV_LOAD_REFUSED) {
1755                         rc = -EBUSY; /* other port in diagnostic mode */
1756                         LOAD_ERROR_EXIT(bp, load_error1);
1757                 }
1758
1759         } else {
1760                 int path = BP_PATH(bp);
1761
1762                 DP(NETIF_MSG_IFUP, "NO MCP - load counts[%d]      %d, %d, %d\n",
1763                    path, load_count[path][0], load_count[path][1],
1764                    load_count[path][2]);
1765                 load_count[path][0]++;
1766                 load_count[path][1 + port]++;
1767                 DP(NETIF_MSG_IFUP, "NO MCP - new load counts[%d]  %d, %d, %d\n",
1768                    path, load_count[path][0], load_count[path][1],
1769                    load_count[path][2]);
1770                 if (load_count[path][0] == 1)
1771                         load_code = FW_MSG_CODE_DRV_LOAD_COMMON;
1772                 else if (load_count[path][1 + port] == 1)
1773                         load_code = FW_MSG_CODE_DRV_LOAD_PORT;
1774                 else
1775                         load_code = FW_MSG_CODE_DRV_LOAD_FUNCTION;
1776         }
1777
1778         if ((load_code == FW_MSG_CODE_DRV_LOAD_COMMON) ||
1779             (load_code == FW_MSG_CODE_DRV_LOAD_COMMON_CHIP) ||
1780             (load_code == FW_MSG_CODE_DRV_LOAD_PORT)) {
1781                 bp->port.pmf = 1;
1782                 /*
1783                  * We need the barrier to ensure the ordering between the
1784                  * writing to bp->port.pmf here and reading it from the
1785                  * bnx2x_periodic_task().
1786                  */
1787                 smp_mb();
1788                 queue_delayed_work(bnx2x_wq, &bp->period_task, 0);
1789         } else
1790                 bp->port.pmf = 0;
1791
1792         DP(NETIF_MSG_LINK, "pmf %d\n", bp->port.pmf);
1793
1794         /* Init Function state controlling object */
1795         bnx2x__init_func_obj(bp);
1796
1797         /* Initialize HW */
1798         rc = bnx2x_init_hw(bp, load_code);
1799         if (rc) {
1800                 BNX2X_ERR("HW init failed, aborting\n");
1801                 bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0);
1802                 LOAD_ERROR_EXIT(bp, load_error2);
1803         }
1804
1805         /* Connect to IRQs */
1806         rc = bnx2x_setup_irqs(bp);
1807         if (rc) {
1808                 bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0);
1809                 LOAD_ERROR_EXIT(bp, load_error2);
1810         }
1811
1812         /* Setup NIC internals and enable interrupts */
1813         bnx2x_nic_init(bp, load_code);
1814
1815         /* Init per-function objects */
1816         bnx2x_init_bp_objs(bp);
1817
1818         if (((load_code == FW_MSG_CODE_DRV_LOAD_COMMON) ||
1819             (load_code == FW_MSG_CODE_DRV_LOAD_COMMON_CHIP)) &&
1820             (bp->common.shmem2_base)) {
1821                 if (SHMEM2_HAS(bp, dcc_support))
1822                         SHMEM2_WR(bp, dcc_support,
1823                                   (SHMEM_DCC_SUPPORT_DISABLE_ENABLE_PF_TLV |
1824                                    SHMEM_DCC_SUPPORT_BANDWIDTH_ALLOCATION_TLV));
1825         }
1826
1827         bp->state = BNX2X_STATE_OPENING_WAIT4_PORT;
1828         rc = bnx2x_func_start(bp);
1829         if (rc) {
1830                 BNX2X_ERR("Function start failed!\n");
1831                 LOAD_ERROR_EXIT(bp, load_error3);
1832         }
1833
1834         /* Send LOAD_DONE command to MCP */
1835         if (!BP_NOMCP(bp)) {
1836                 load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0);
1837                 if (!load_code) {
1838                         BNX2X_ERR("MCP response failure, aborting\n");
1839                         rc = -EBUSY;
1840                         LOAD_ERROR_EXIT(bp, load_error3);
1841                 }
1842         }
1843
1844         rc = bnx2x_setup_leading(bp);
1845         if (rc) {
1846                 BNX2X_ERR("Setup leading failed!\n");
1847                 LOAD_ERROR_EXIT(bp, load_error3);
1848         }
1849
1850 #ifdef BCM_CNIC
1851         /* Enable Timer scan */
1852         REG_WR(bp, TM_REG_EN_LINEAR0_TIMER + port*4, 1);
1853 #endif
1854
1855         for_each_nondefault_queue(bp, i) {
1856                 rc = bnx2x_setup_queue(bp, &bp->fp[i], 0);
1857                 if (rc)
1858                         LOAD_ERROR_EXIT(bp, load_error4);
1859         }
1860
1861         rc = bnx2x_init_rss_pf(bp);
1862         if (rc)
1863                 LOAD_ERROR_EXIT(bp, load_error4);
1864
1865         /* Now when Clients are configured we are ready to work */
1866         bp->state = BNX2X_STATE_OPEN;
1867
1868         /* Configure a ucast MAC */
1869         rc = bnx2x_set_eth_mac(bp, true);
1870         if (rc)
1871                 LOAD_ERROR_EXIT(bp, load_error4);
1872
1873         if (bp->pending_max) {
1874                 bnx2x_update_max_mf_config(bp, bp->pending_max);
1875                 bp->pending_max = 0;
1876         }
1877
1878         if (bp->port.pmf)
1879                 bnx2x_initial_phy_init(bp, load_mode);
1880
1881         /* Start fast path */
1882
1883         /* Initialize Rx filter. */
1884         netif_addr_lock_bh(bp->dev);
1885         bnx2x_set_rx_mode(bp->dev);
1886         netif_addr_unlock_bh(bp->dev);
1887
1888         /* Start the Tx */
1889         switch (load_mode) {
1890         case LOAD_NORMAL:
1891                 /* Tx queue should be only reenabled */
1892                 netif_tx_wake_all_queues(bp->dev);
1893                 break;
1894
1895         case LOAD_OPEN:
1896                 netif_tx_start_all_queues(bp->dev);
1897                 smp_mb__after_clear_bit();
1898                 break;
1899
1900         case LOAD_DIAG:
1901                 bp->state = BNX2X_STATE_DIAG;
1902                 break;
1903
1904         default:
1905                 break;
1906         }
1907
1908         if (!bp->port.pmf)
1909                 bnx2x__link_status_update(bp);
1910
1911         /* start the timer */
1912         mod_timer(&bp->timer, jiffies + bp->current_interval);
1913
1914 #ifdef BCM_CNIC
1915         bnx2x_setup_cnic_irq_info(bp);
1916         if (bp->state == BNX2X_STATE_OPEN)
1917                 bnx2x_cnic_notify(bp, CNIC_CTL_START_CMD);
1918 #endif
1919         bnx2x_inc_load_cnt(bp);
1920
1921         /* Wait for all pending SP commands to complete */
1922         if (!bnx2x_wait_sp_comp(bp, ~0x0UL)) {
1923                 BNX2X_ERR("Timeout waiting for SP elements to complete\n");
1924                 bnx2x_nic_unload(bp, UNLOAD_CLOSE);
1925                 return -EBUSY;
1926         }
1927
1928         bnx2x_dcbx_init(bp);
1929         return 0;
1930
1931 #ifndef BNX2X_STOP_ON_ERROR
1932 load_error4:
1933 #ifdef BCM_CNIC
1934         /* Disable Timer scan */
1935         REG_WR(bp, TM_REG_EN_LINEAR0_TIMER + port*4, 0);
1936 #endif
1937 load_error3:
1938         bnx2x_int_disable_sync(bp, 1);
1939
1940         /* Clean queueable objects */
1941         bnx2x_squeeze_objects(bp);
1942
1943         /* Free SKBs, SGEs, TPA pool and driver internals */
1944         bnx2x_free_skbs(bp);
1945         for_each_rx_queue(bp, i)
1946                 bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
1947
1948         /* Release IRQs */
1949         bnx2x_free_irq(bp);
1950 load_error2:
1951         if (!BP_NOMCP(bp)) {
1952                 bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP, 0);
1953                 bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE, 0);
1954         }
1955
1956         bp->port.pmf = 0;
1957 load_error1:
1958         bnx2x_napi_disable(bp);
1959 load_error0:
1960         bnx2x_free_mem(bp);
1961
1962         return rc;
1963 #endif /* ! BNX2X_STOP_ON_ERROR */
1964 }
1965
1966 /* must be called with rtnl_lock */
1967 int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode)
1968 {
1969         int i;
1970         bool global = false;
1971
1972         if ((bp->state == BNX2X_STATE_CLOSED) ||
1973             (bp->state == BNX2X_STATE_ERROR)) {
1974                 /* We can get here if the driver has been unloaded
1975                  * during parity error recovery and is either waiting for a
1976                  * leader to complete or for other functions to unload and
1977                  * then ifdown has been issued. In this case we want to
1978                  * unload and let other functions to complete a recovery
1979                  * process.
1980                  */
1981                 bp->recovery_state = BNX2X_RECOVERY_DONE;
1982                 bp->is_leader = 0;
1983                 bnx2x_release_leader_lock(bp);
1984                 smp_mb();
1985
1986                 DP(NETIF_MSG_HW, "Releasing a leadership...\n");
1987
1988                 return -EINVAL;
1989         }
1990
1991 #ifdef BCM_CNIC
1992         bnx2x_cnic_notify(bp, CNIC_CTL_STOP_CMD);
1993 #endif
1994         bp->state = BNX2X_STATE_CLOSING_WAIT4_HALT;
1995         smp_mb();
1996
1997         bp->rx_mode = BNX2X_RX_MODE_NONE;
1998
1999         /* Stop Tx */
2000         bnx2x_tx_disable(bp);
2001
2002         del_timer_sync(&bp->timer);
2003
2004         /* Set ALWAYS_ALIVE bit in shmem */
2005         bp->fw_drv_pulse_wr_seq |= DRV_PULSE_ALWAYS_ALIVE;
2006
2007         bnx2x_drv_pulse(bp);
2008
2009         bnx2x_stats_handle(bp, STATS_EVENT_STOP);
2010
2011         /* Cleanup the chip if needed */
2012         if (unload_mode != UNLOAD_RECOVERY)
2013                 bnx2x_chip_cleanup(bp, unload_mode);
2014         else {
2015                 /* Send the UNLOAD_REQUEST to the MCP */
2016                 bnx2x_send_unload_req(bp, unload_mode);
2017
2018                 /*
2019                  * Prevent transactions to host from the functions on the
2020                  * engine that doesn't reset global blocks in case of global
2021                  * attention once gloabl blocks are reset and gates are opened
2022                  * (the engine which leader will perform the recovery
2023                  * last).
2024                  */
2025                 if (!CHIP_IS_E1x(bp))
2026                         bnx2x_pf_disable(bp);
2027
2028                 /* Disable HW interrupts, NAPI */
2029                 bnx2x_netif_stop(bp, 1);
2030
2031                 /* Release IRQs */
2032                 bnx2x_free_irq(bp);
2033
2034                 /* Report UNLOAD_DONE to MCP */
2035                 bnx2x_send_unload_done(bp);
2036         }
2037
2038         /*
2039          * At this stage no more interrupts will arrive so we may safly clean
2040          * the queueable objects here in case they failed to get cleaned so far.
2041          */
2042         bnx2x_squeeze_objects(bp);
2043
2044         bp->port.pmf = 0;
2045
2046         /* Free SKBs, SGEs, TPA pool and driver internals */
2047         bnx2x_free_skbs(bp);
2048         for_each_rx_queue(bp, i)
2049                 bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
2050
2051         bnx2x_free_mem(bp);
2052
2053         bp->state = BNX2X_STATE_CLOSED;
2054
2055         /* Check if there are pending parity attentions. If there are - set
2056          * RECOVERY_IN_PROGRESS.
2057          */
2058         if (bnx2x_chk_parity_attn(bp, &global, false)) {
2059                 bnx2x_set_reset_in_progress(bp);
2060
2061                 /* Set RESET_IS_GLOBAL if needed */
2062                 if (global)
2063                         bnx2x_set_reset_global(bp);
2064         }
2065
2066
2067         /* The last driver must disable a "close the gate" if there is no
2068          * parity attention or "process kill" pending.
2069          */
2070         if (!bnx2x_dec_load_cnt(bp) && bnx2x_reset_is_done(bp, BP_PATH(bp)))
2071                 bnx2x_disable_close_the_gate(bp);
2072
2073         return 0;
2074 }
2075
2076 int bnx2x_set_power_state(struct bnx2x *bp, pci_power_t state)
2077 {
2078         u16 pmcsr;
2079
2080         /* If there is no power capability, silently succeed */
2081         if (!bp->pm_cap) {
2082                 DP(NETIF_MSG_HW, "No power capability. Breaking.\n");
2083                 return 0;
2084         }
2085
2086         pci_read_config_word(bp->pdev, bp->pm_cap + PCI_PM_CTRL, &pmcsr);
2087
2088         switch (state) {
2089         case PCI_D0:
2090                 pci_write_config_word(bp->pdev, bp->pm_cap + PCI_PM_CTRL,
2091                                       ((pmcsr & ~PCI_PM_CTRL_STATE_MASK) |
2092                                        PCI_PM_CTRL_PME_STATUS));
2093
2094                 if (pmcsr & PCI_PM_CTRL_STATE_MASK)
2095                         /* delay required during transition out of D3hot */
2096                         msleep(20);
2097                 break;
2098
2099         case PCI_D3hot:
2100                 /* If there are other clients above don't
2101                    shut down the power */
2102                 if (atomic_read(&bp->pdev->enable_cnt) != 1)
2103                         return 0;
2104                 /* Don't shut down the power for emulation and FPGA */
2105                 if (CHIP_REV_IS_SLOW(bp))
2106                         return 0;
2107
2108                 pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
2109                 pmcsr |= 3;
2110
2111                 if (bp->wol)
2112                         pmcsr |= PCI_PM_CTRL_PME_ENABLE;
2113
2114                 pci_write_config_word(bp->pdev, bp->pm_cap + PCI_PM_CTRL,
2115                                       pmcsr);
2116
2117                 /* No more memory access after this point until
2118                 * device is brought back to D0.
2119                 */
2120                 break;
2121
2122         default:
2123                 return -EINVAL;
2124         }
2125         return 0;
2126 }
2127
2128 /*
2129  * net_device service functions
2130  */
2131 int bnx2x_poll(struct napi_struct *napi, int budget)
2132 {
2133         int work_done = 0;
2134         u8 cos;
2135         struct bnx2x_fastpath *fp = container_of(napi, struct bnx2x_fastpath,
2136                                                  napi);
2137         struct bnx2x *bp = fp->bp;
2138
2139         while (1) {
2140 #ifdef BNX2X_STOP_ON_ERROR
2141                 if (unlikely(bp->panic)) {
2142                         napi_complete(napi);
2143                         return 0;
2144                 }
2145 #endif
2146
2147                 for_each_cos_in_tx_queue(fp, cos)
2148                         if (bnx2x_tx_queue_has_work(&fp->txdata[cos]))
2149                                 bnx2x_tx_int(bp, &fp->txdata[cos]);
2150
2151
2152                 if (bnx2x_has_rx_work(fp)) {
2153                         work_done += bnx2x_rx_int(fp, budget - work_done);
2154
2155                         /* must not complete if we consumed full budget */
2156                         if (work_done >= budget)
2157                                 break;
2158                 }
2159
2160                 /* Fall out from the NAPI loop if needed */
2161                 if (!(bnx2x_has_rx_work(fp) || bnx2x_has_tx_work(fp))) {
2162 #ifdef BCM_CNIC
2163                         /* No need to update SB for FCoE L2 ring as long as
2164                          * it's connected to the default SB and the SB
2165                          * has been updated when NAPI was scheduled.
2166                          */
2167                         if (IS_FCOE_FP(fp)) {
2168                                 napi_complete(napi);
2169                                 break;
2170                         }
2171 #endif
2172
2173                         bnx2x_update_fpsb_idx(fp);
2174                         /* bnx2x_has_rx_work() reads the status block,
2175                          * thus we need to ensure that status block indices
2176                          * have been actually read (bnx2x_update_fpsb_idx)
2177                          * prior to this check (bnx2x_has_rx_work) so that
2178                          * we won't write the "newer" value of the status block
2179                          * to IGU (if there was a DMA right after
2180                          * bnx2x_has_rx_work and if there is no rmb, the memory
2181                          * reading (bnx2x_update_fpsb_idx) may be postponed
2182                          * to right before bnx2x_ack_sb). In this case there
2183                          * will never be another interrupt until there is
2184                          * another update of the status block, while there
2185                          * is still unhandled work.
2186                          */
2187                         rmb();
2188
2189                         if (!(bnx2x_has_rx_work(fp) || bnx2x_has_tx_work(fp))) {
2190                                 napi_complete(napi);
2191                                 /* Re-enable interrupts */
2192                                 DP(NETIF_MSG_HW,
2193                                    "Update index to %d\n", fp->fp_hc_idx);
2194                                 bnx2x_ack_sb(bp, fp->igu_sb_id, USTORM_ID,
2195                                              le16_to_cpu(fp->fp_hc_idx),
2196                                              IGU_INT_ENABLE, 1);
2197                                 break;
2198                         }
2199                 }
2200         }
2201
2202         return work_done;
2203 }
2204
2205 /* we split the first BD into headers and data BDs
2206  * to ease the pain of our fellow microcode engineers
2207  * we use one mapping for both BDs
2208  * So far this has only been observed to happen
2209  * in Other Operating Systems(TM)
2210  */
2211 static noinline u16 bnx2x_tx_split(struct bnx2x *bp,
2212                                    struct bnx2x_fp_txdata *txdata,
2213                                    struct sw_tx_bd *tx_buf,
2214                                    struct eth_tx_start_bd **tx_bd, u16 hlen,
2215                                    u16 bd_prod, int nbd)
2216 {
2217         struct eth_tx_start_bd *h_tx_bd = *tx_bd;
2218         struct eth_tx_bd *d_tx_bd;
2219         dma_addr_t mapping;
2220         int old_len = le16_to_cpu(h_tx_bd->nbytes);
2221
2222         /* first fix first BD */
2223         h_tx_bd->nbd = cpu_to_le16(nbd);
2224         h_tx_bd->nbytes = cpu_to_le16(hlen);
2225
2226         DP(NETIF_MSG_TX_QUEUED, "TSO split header size is %d "
2227            "(%x:%x) nbd %d\n", h_tx_bd->nbytes, h_tx_bd->addr_hi,
2228            h_tx_bd->addr_lo, h_tx_bd->nbd);
2229
2230         /* now get a new data BD
2231          * (after the pbd) and fill it */
2232         bd_prod = TX_BD(NEXT_TX_IDX(bd_prod));
2233         d_tx_bd = &txdata->tx_desc_ring[bd_prod].reg_bd;
2234
2235         mapping = HILO_U64(le32_to_cpu(h_tx_bd->addr_hi),
2236                            le32_to_cpu(h_tx_bd->addr_lo)) + hlen;
2237
2238         d_tx_bd->addr_hi = cpu_to_le32(U64_HI(mapping));
2239         d_tx_bd->addr_lo = cpu_to_le32(U64_LO(mapping));
2240         d_tx_bd->nbytes = cpu_to_le16(old_len - hlen);
2241
2242         /* this marks the BD as one that has no individual mapping */
2243         tx_buf->flags |= BNX2X_TSO_SPLIT_BD;
2244
2245         DP(NETIF_MSG_TX_QUEUED,
2246            "TSO split data size is %d (%x:%x)\n",
2247            d_tx_bd->nbytes, d_tx_bd->addr_hi, d_tx_bd->addr_lo);
2248
2249         /* update tx_bd */
2250         *tx_bd = (struct eth_tx_start_bd *)d_tx_bd;
2251
2252         return bd_prod;
2253 }
2254
2255 static inline u16 bnx2x_csum_fix(unsigned char *t_header, u16 csum, s8 fix)
2256 {
2257         if (fix > 0)
2258                 csum = (u16) ~csum_fold(csum_sub(csum,
2259                                 csum_partial(t_header - fix, fix, 0)));
2260
2261         else if (fix < 0)
2262                 csum = (u16) ~csum_fold(csum_add(csum,
2263                                 csum_partial(t_header, -fix, 0)));
2264
2265         return swab16(csum);
2266 }
2267
2268 static inline u32 bnx2x_xmit_type(struct bnx2x *bp, struct sk_buff *skb)
2269 {
2270         u32 rc;
2271
2272         if (skb->ip_summed != CHECKSUM_PARTIAL)
2273                 rc = XMIT_PLAIN;
2274
2275         else {
2276                 if (vlan_get_protocol(skb) == htons(ETH_P_IPV6)) {
2277                         rc = XMIT_CSUM_V6;
2278                         if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
2279                                 rc |= XMIT_CSUM_TCP;
2280
2281                 } else {
2282                         rc = XMIT_CSUM_V4;
2283                         if (ip_hdr(skb)->protocol == IPPROTO_TCP)
2284                                 rc |= XMIT_CSUM_TCP;
2285                 }
2286         }
2287
2288         if (skb_is_gso_v6(skb))
2289                 rc |= XMIT_GSO_V6 | XMIT_CSUM_TCP | XMIT_CSUM_V6;
2290         else if (skb_is_gso(skb))
2291                 rc |= XMIT_GSO_V4 | XMIT_CSUM_V4 | XMIT_CSUM_TCP;
2292
2293         return rc;
2294 }
2295
2296 #if (MAX_SKB_FRAGS >= MAX_FETCH_BD - 3)
2297 /* check if packet requires linearization (packet is too fragmented)
2298    no need to check fragmentation if page size > 8K (there will be no
2299    violation to FW restrictions) */
2300 static int bnx2x_pkt_req_lin(struct bnx2x *bp, struct sk_buff *skb,
2301                              u32 xmit_type)
2302 {
2303         int to_copy = 0;
2304         int hlen = 0;
2305         int first_bd_sz = 0;
2306
2307         /* 3 = 1 (for linear data BD) + 2 (for PBD and last BD) */
2308         if (skb_shinfo(skb)->nr_frags >= (MAX_FETCH_BD - 3)) {
2309
2310                 if (xmit_type & XMIT_GSO) {
2311                         unsigned short lso_mss = skb_shinfo(skb)->gso_size;
2312                         /* Check if LSO packet needs to be copied:
2313                            3 = 1 (for headers BD) + 2 (for PBD and last BD) */
2314                         int wnd_size = MAX_FETCH_BD - 3;
2315                         /* Number of windows to check */
2316                         int num_wnds = skb_shinfo(skb)->nr_frags - wnd_size;
2317                         int wnd_idx = 0;
2318                         int frag_idx = 0;
2319                         u32 wnd_sum = 0;
2320
2321                         /* Headers length */
2322                         hlen = (int)(skb_transport_header(skb) - skb->data) +
2323                                 tcp_hdrlen(skb);
2324
2325                         /* Amount of data (w/o headers) on linear part of SKB*/
2326                         first_bd_sz = skb_headlen(skb) - hlen;
2327
2328                         wnd_sum  = first_bd_sz;
2329
2330                         /* Calculate the first sum - it's special */
2331                         for (frag_idx = 0; frag_idx < wnd_size - 1; frag_idx++)
2332                                 wnd_sum +=
2333                                         skb_shinfo(skb)->frags[frag_idx].size;
2334
2335                         /* If there was data on linear skb data - check it */
2336                         if (first_bd_sz > 0) {
2337                                 if (unlikely(wnd_sum < lso_mss)) {
2338                                         to_copy = 1;
2339                                         goto exit_lbl;
2340                                 }
2341
2342                                 wnd_sum -= first_bd_sz;
2343                         }
2344
2345                         /* Others are easier: run through the frag list and
2346                            check all windows */
2347                         for (wnd_idx = 0; wnd_idx <= num_wnds; wnd_idx++) {
2348                                 wnd_sum +=
2349                           skb_shinfo(skb)->frags[wnd_idx + wnd_size - 1].size;
2350
2351                                 if (unlikely(wnd_sum < lso_mss)) {
2352                                         to_copy = 1;
2353                                         break;
2354                                 }
2355                                 wnd_sum -=
2356                                         skb_shinfo(skb)->frags[wnd_idx].size;
2357                         }
2358                 } else {
2359                         /* in non-LSO too fragmented packet should always
2360                            be linearized */
2361                         to_copy = 1;
2362                 }
2363         }
2364
2365 exit_lbl:
2366         if (unlikely(to_copy))
2367                 DP(NETIF_MSG_TX_QUEUED,
2368                    "Linearization IS REQUIRED for %s packet. "
2369                    "num_frags %d  hlen %d  first_bd_sz %d\n",
2370                    (xmit_type & XMIT_GSO) ? "LSO" : "non-LSO",
2371                    skb_shinfo(skb)->nr_frags, hlen, first_bd_sz);
2372
2373         return to_copy;
2374 }
2375 #endif
2376
2377 static inline void bnx2x_set_pbd_gso_e2(struct sk_buff *skb, u32 *parsing_data,
2378                                         u32 xmit_type)
2379 {
2380         *parsing_data |= (skb_shinfo(skb)->gso_size <<
2381                               ETH_TX_PARSE_BD_E2_LSO_MSS_SHIFT) &
2382                               ETH_TX_PARSE_BD_E2_LSO_MSS;
2383         if ((xmit_type & XMIT_GSO_V6) &&
2384             (ipv6_hdr(skb)->nexthdr == NEXTHDR_IPV6))
2385                 *parsing_data |= ETH_TX_PARSE_BD_E2_IPV6_WITH_EXT_HDR;
2386 }
2387
2388 /**
2389  * bnx2x_set_pbd_gso - update PBD in GSO case.
2390  *
2391  * @skb:        packet skb
2392  * @pbd:        parse BD
2393  * @xmit_type:  xmit flags
2394  */
2395 static inline void bnx2x_set_pbd_gso(struct sk_buff *skb,
2396                                      struct eth_tx_parse_bd_e1x *pbd,
2397                                      u32 xmit_type)
2398 {
2399         pbd->lso_mss = cpu_to_le16(skb_shinfo(skb)->gso_size);
2400         pbd->tcp_send_seq = swab32(tcp_hdr(skb)->seq);
2401         pbd->tcp_flags = pbd_tcp_flags(skb);
2402
2403         if (xmit_type & XMIT_GSO_V4) {
2404                 pbd->ip_id = swab16(ip_hdr(skb)->id);
2405                 pbd->tcp_pseudo_csum =
2406                         swab16(~csum_tcpudp_magic(ip_hdr(skb)->saddr,
2407                                                   ip_hdr(skb)->daddr,
2408                                                   0, IPPROTO_TCP, 0));
2409
2410         } else
2411                 pbd->tcp_pseudo_csum =
2412                         swab16(~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
2413                                                 &ipv6_hdr(skb)->daddr,
2414                                                 0, IPPROTO_TCP, 0));
2415
2416         pbd->global_data |= ETH_TX_PARSE_BD_E1X_PSEUDO_CS_WITHOUT_LEN;
2417 }
2418
2419 /**
2420  * bnx2x_set_pbd_csum_e2 - update PBD with checksum and return header length
2421  *
2422  * @bp:                 driver handle
2423  * @skb:                packet skb
2424  * @parsing_data:       data to be updated
2425  * @xmit_type:          xmit flags
2426  *
2427  * 57712 related
2428  */
2429 static inline  u8 bnx2x_set_pbd_csum_e2(struct bnx2x *bp, struct sk_buff *skb,
2430         u32 *parsing_data, u32 xmit_type)
2431 {
2432         *parsing_data |=
2433                         ((((u8 *)skb_transport_header(skb) - skb->data) >> 1) <<
2434                         ETH_TX_PARSE_BD_E2_TCP_HDR_START_OFFSET_W_SHIFT) &
2435                         ETH_TX_PARSE_BD_E2_TCP_HDR_START_OFFSET_W;
2436
2437         if (xmit_type & XMIT_CSUM_TCP) {
2438                 *parsing_data |= ((tcp_hdrlen(skb) / 4) <<
2439                         ETH_TX_PARSE_BD_E2_TCP_HDR_LENGTH_DW_SHIFT) &
2440                         ETH_TX_PARSE_BD_E2_TCP_HDR_LENGTH_DW;
2441
2442                 return skb_transport_header(skb) + tcp_hdrlen(skb) - skb->data;
2443         } else
2444                 /* We support checksum offload for TCP and UDP only.
2445                  * No need to pass the UDP header length - it's a constant.
2446                  */
2447                 return skb_transport_header(skb) +
2448                                 sizeof(struct udphdr) - skb->data;
2449 }
2450
2451 static inline void bnx2x_set_sbd_csum(struct bnx2x *bp, struct sk_buff *skb,
2452         struct eth_tx_start_bd *tx_start_bd, u32 xmit_type)
2453 {
2454         tx_start_bd->bd_flags.as_bitfield |= ETH_TX_BD_FLAGS_L4_CSUM;
2455
2456         if (xmit_type & XMIT_CSUM_V4)
2457                 tx_start_bd->bd_flags.as_bitfield |=
2458                                         ETH_TX_BD_FLAGS_IP_CSUM;
2459         else
2460                 tx_start_bd->bd_flags.as_bitfield |=
2461                                         ETH_TX_BD_FLAGS_IPV6;
2462
2463         if (!(xmit_type & XMIT_CSUM_TCP))
2464                 tx_start_bd->bd_flags.as_bitfield |= ETH_TX_BD_FLAGS_IS_UDP;
2465 }
2466
2467 /**
2468  * bnx2x_set_pbd_csum - update PBD with checksum and return header length
2469  *
2470  * @bp:         driver handle
2471  * @skb:        packet skb
2472  * @pbd:        parse BD to be updated
2473  * @xmit_type:  xmit flags
2474  */
2475 static inline u8 bnx2x_set_pbd_csum(struct bnx2x *bp, struct sk_buff *skb,
2476         struct eth_tx_parse_bd_e1x *pbd,
2477         u32 xmit_type)
2478 {
2479         u8 hlen = (skb_network_header(skb) - skb->data) >> 1;
2480
2481         /* for now NS flag is not used in Linux */
2482         pbd->global_data =
2483                 (hlen | ((skb->protocol == cpu_to_be16(ETH_P_8021Q)) <<
2484                          ETH_TX_PARSE_BD_E1X_LLC_SNAP_EN_SHIFT));
2485
2486         pbd->ip_hlen_w = (skb_transport_header(skb) -
2487                         skb_network_header(skb)) >> 1;
2488
2489         hlen += pbd->ip_hlen_w;
2490
2491         /* We support checksum offload for TCP and UDP only */
2492         if (xmit_type & XMIT_CSUM_TCP)
2493                 hlen += tcp_hdrlen(skb) / 2;
2494         else
2495                 hlen += sizeof(struct udphdr) / 2;
2496
2497         pbd->total_hlen_w = cpu_to_le16(hlen);
2498         hlen = hlen*2;
2499
2500         if (xmit_type & XMIT_CSUM_TCP) {
2501                 pbd->tcp_pseudo_csum = swab16(tcp_hdr(skb)->check);
2502
2503         } else {
2504                 s8 fix = SKB_CS_OFF(skb); /* signed! */
2505
2506                 DP(NETIF_MSG_TX_QUEUED,
2507                    "hlen %d  fix %d  csum before fix %x\n",
2508                    le16_to_cpu(pbd->total_hlen_w), fix, SKB_CS(skb));
2509
2510                 /* HW bug: fixup the CSUM */
2511                 pbd->tcp_pseudo_csum =
2512                         bnx2x_csum_fix(skb_transport_header(skb),
2513                                        SKB_CS(skb), fix);
2514
2515                 DP(NETIF_MSG_TX_QUEUED, "csum after fix %x\n",
2516                    pbd->tcp_pseudo_csum);
2517         }
2518
2519         return hlen;
2520 }
2521
2522 /* called with netif_tx_lock
2523  * bnx2x_tx_int() runs without netif_tx_lock unless it needs to call
2524  * netif_wake_queue()
2525  */
2526 netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
2527 {
2528         struct bnx2x *bp = netdev_priv(dev);
2529
2530         struct bnx2x_fastpath *fp;
2531         struct netdev_queue *txq;
2532         struct bnx2x_fp_txdata *txdata;
2533         struct sw_tx_bd *tx_buf;
2534         struct eth_tx_start_bd *tx_start_bd, *first_bd;
2535         struct eth_tx_bd *tx_data_bd, *total_pkt_bd = NULL;
2536         struct eth_tx_parse_bd_e1x *pbd_e1x = NULL;
2537         struct eth_tx_parse_bd_e2 *pbd_e2 = NULL;
2538         u32 pbd_e2_parsing_data = 0;
2539         u16 pkt_prod, bd_prod;
2540         int nbd, txq_index, fp_index, txdata_index;
2541         dma_addr_t mapping;
2542         u32 xmit_type = bnx2x_xmit_type(bp, skb);
2543         int i;
2544         u8 hlen = 0;
2545         __le16 pkt_size = 0;
2546         struct ethhdr *eth;
2547         u8 mac_type = UNICAST_ADDRESS;
2548
2549 #ifdef BNX2X_STOP_ON_ERROR
2550         if (unlikely(bp->panic))
2551                 return NETDEV_TX_BUSY;
2552 #endif
2553
2554         txq_index = skb_get_queue_mapping(skb);
2555         txq = netdev_get_tx_queue(dev, txq_index);
2556
2557         BUG_ON(txq_index >= MAX_ETH_TXQ_IDX(bp) + FCOE_PRESENT);
2558
2559         /* decode the fastpath index and the cos index from the txq */
2560         fp_index = TXQ_TO_FP(txq_index);
2561         txdata_index = TXQ_TO_COS(txq_index);
2562
2563 #ifdef BCM_CNIC
2564         /*
2565          * Override the above for the FCoE queue:
2566          *   - FCoE fp entry is right after the ETH entries.
2567          *   - FCoE L2 queue uses bp->txdata[0] only.
2568          */
2569         if (unlikely(!NO_FCOE(bp) && (txq_index ==
2570                                       bnx2x_fcoe_tx(bp, txq_index)))) {
2571                 fp_index = FCOE_IDX;
2572                 txdata_index = 0;
2573         }
2574 #endif
2575
2576         /* enable this debug print to view the transmission queue being used
2577         DP(BNX2X_MSG_FP, "indices: txq %d, fp %d, txdata %d",
2578            txq_index, fp_index, txdata_index); */
2579
2580         /* locate the fastpath and the txdata */
2581         fp = &bp->fp[fp_index];
2582         txdata = &fp->txdata[txdata_index];
2583
2584         /* enable this debug print to view the tranmission details
2585         DP(BNX2X_MSG_FP,"transmitting packet cid %d fp index %d txdata_index %d"
2586                         " tx_data ptr %p fp pointer %p",
2587            txdata->cid, fp_index, txdata_index, txdata, fp); */
2588
2589         if (unlikely(bnx2x_tx_avail(bp, txdata) <
2590                      (skb_shinfo(skb)->nr_frags + 3))) {
2591                 fp->eth_q_stats.driver_xoff++;
2592                 netif_tx_stop_queue(txq);
2593                 BNX2X_ERR("BUG! Tx ring full when queue awake!\n");
2594                 return NETDEV_TX_BUSY;
2595         }
2596
2597         DP(NETIF_MSG_TX_QUEUED, "queue[%d]: SKB: summed %x  protocol %x  "
2598                                 "protocol(%x,%x) gso type %x  xmit_type %x\n",
2599            txq_index, skb->ip_summed, skb->protocol, ipv6_hdr(skb)->nexthdr,
2600            ip_hdr(skb)->protocol, skb_shinfo(skb)->gso_type, xmit_type);
2601
2602         eth = (struct ethhdr *)skb->data;
2603
2604         /* set flag according to packet type (UNICAST_ADDRESS is default)*/
2605         if (unlikely(is_multicast_ether_addr(eth->h_dest))) {
2606                 if (is_broadcast_ether_addr(eth->h_dest))
2607                         mac_type = BROADCAST_ADDRESS;
2608                 else
2609                         mac_type = MULTICAST_ADDRESS;
2610         }
2611
2612 #if (MAX_SKB_FRAGS >= MAX_FETCH_BD - 3)
2613         /* First, check if we need to linearize the skb (due to FW
2614            restrictions). No need to check fragmentation if page size > 8K
2615            (there will be no violation to FW restrictions) */
2616         if (bnx2x_pkt_req_lin(bp, skb, xmit_type)) {
2617                 /* Statistics of linearization */
2618                 bp->lin_cnt++;
2619                 if (skb_linearize(skb) != 0) {
2620                         DP(NETIF_MSG_TX_QUEUED, "SKB linearization failed - "
2621                            "silently dropping this SKB\n");
2622                         dev_kfree_skb_any(skb);
2623                         return NETDEV_TX_OK;
2624                 }
2625         }
2626 #endif
2627         /* Map skb linear data for DMA */
2628         mapping = dma_map_single(&bp->pdev->dev, skb->data,
2629                                  skb_headlen(skb), DMA_TO_DEVICE);
2630         if (unlikely(dma_mapping_error(&bp->pdev->dev, mapping))) {
2631                 DP(NETIF_MSG_TX_QUEUED, "SKB mapping failed - "
2632                    "silently dropping this SKB\n");
2633                 dev_kfree_skb_any(skb);
2634                 return NETDEV_TX_OK;
2635         }
2636         /*
2637         Please read carefully. First we use one BD which we mark as start,
2638         then we have a parsing info BD (used for TSO or xsum),
2639         and only then we have the rest of the TSO BDs.
2640         (don't forget to mark the last one as last,
2641         and to unmap only AFTER you write to the BD ...)
2642         And above all, all pdb sizes are in words - NOT DWORDS!
2643         */
2644
2645         /* get current pkt produced now - advance it just before sending packet
2646          * since mapping of pages may fail and cause packet to be dropped
2647          */
2648         pkt_prod = txdata->tx_pkt_prod;
2649         bd_prod = TX_BD(txdata->tx_bd_prod);
2650
2651         /* get a tx_buf and first BD
2652          * tx_start_bd may be changed during SPLIT,
2653          * but first_bd will always stay first
2654          */
2655         tx_buf = &txdata->tx_buf_ring[TX_BD(pkt_prod)];
2656         tx_start_bd = &txdata->tx_desc_ring[bd_prod].start_bd;
2657         first_bd = tx_start_bd;
2658
2659         tx_start_bd->bd_flags.as_bitfield = ETH_TX_BD_FLAGS_START_BD;
2660         SET_FLAG(tx_start_bd->general_data, ETH_TX_START_BD_ETH_ADDR_TYPE,
2661                  mac_type);
2662
2663         /* header nbd */
2664         SET_FLAG(tx_start_bd->general_data, ETH_TX_START_BD_HDR_NBDS, 1);
2665
2666         /* remember the first BD of the packet */
2667         tx_buf->first_bd = txdata->tx_bd_prod;
2668         tx_buf->skb = skb;
2669         tx_buf->flags = 0;
2670
2671         DP(NETIF_MSG_TX_QUEUED,
2672            "sending pkt %u @%p  next_idx %u  bd %u @%p\n",
2673            pkt_prod, tx_buf, txdata->tx_pkt_prod, bd_prod, tx_start_bd);
2674
2675         if (vlan_tx_tag_present(skb)) {
2676                 tx_start_bd->vlan_or_ethertype =
2677                     cpu_to_le16(vlan_tx_tag_get(skb));
2678                 tx_start_bd->bd_flags.as_bitfield |=
2679                     (X_ETH_OUTBAND_VLAN << ETH_TX_BD_FLAGS_VLAN_MODE_SHIFT);
2680         } else
2681                 tx_start_bd->vlan_or_ethertype = cpu_to_le16(pkt_prod);
2682
2683         /* turn on parsing and get a BD */
2684         bd_prod = TX_BD(NEXT_TX_IDX(bd_prod));
2685
2686         if (xmit_type & XMIT_CSUM)
2687                 bnx2x_set_sbd_csum(bp, skb, tx_start_bd, xmit_type);
2688
2689         if (!CHIP_IS_E1x(bp)) {
2690                 pbd_e2 = &txdata->tx_desc_ring[bd_prod].parse_bd_e2;
2691                 memset(pbd_e2, 0, sizeof(struct eth_tx_parse_bd_e2));
2692                 /* Set PBD in checksum offload case */
2693                 if (xmit_type & XMIT_CSUM)
2694                         hlen = bnx2x_set_pbd_csum_e2(bp, skb,
2695                                                      &pbd_e2_parsing_data,
2696                                                      xmit_type);
2697                 if (IS_MF_SI(bp)) {
2698                         /*
2699                          * fill in the MAC addresses in the PBD - for local
2700                          * switching
2701                          */
2702                         bnx2x_set_fw_mac_addr(&pbd_e2->src_mac_addr_hi,
2703                                               &pbd_e2->src_mac_addr_mid,
2704                                               &pbd_e2->src_mac_addr_lo,
2705                                               eth->h_source);
2706                         bnx2x_set_fw_mac_addr(&pbd_e2->dst_mac_addr_hi,
2707                                               &pbd_e2->dst_mac_addr_mid,
2708                                               &pbd_e2->dst_mac_addr_lo,
2709                                               eth->h_dest);
2710                 }
2711         } else {
2712                 pbd_e1x = &txdata->tx_desc_ring[bd_prod].parse_bd_e1x;
2713                 memset(pbd_e1x, 0, sizeof(struct eth_tx_parse_bd_e1x));
2714                 /* Set PBD in checksum offload case */
2715                 if (xmit_type & XMIT_CSUM)
2716                         hlen = bnx2x_set_pbd_csum(bp, skb, pbd_e1x, xmit_type);
2717
2718         }
2719
2720         /* Setup the data pointer of the first BD of the packet */
2721         tx_start_bd->addr_hi = cpu_to_le32(U64_HI(mapping));
2722         tx_start_bd->addr_lo = cpu_to_le32(U64_LO(mapping));
2723         nbd = 2; /* start_bd + pbd + frags (updated when pages are mapped) */
2724         tx_start_bd->nbytes = cpu_to_le16(skb_headlen(skb));
2725         pkt_size = tx_start_bd->nbytes;
2726
2727         DP(NETIF_MSG_TX_QUEUED, "first bd @%p  addr (%x:%x)  nbd %d"
2728            "  nbytes %d  flags %x  vlan %x\n",
2729            tx_start_bd, tx_start_bd->addr_hi, tx_start_bd->addr_lo,
2730            le16_to_cpu(tx_start_bd->nbd), le16_to_cpu(tx_start_bd->nbytes),
2731            tx_start_bd->bd_flags.as_bitfield,
2732            le16_to_cpu(tx_start_bd->vlan_or_ethertype));
2733
2734         if (xmit_type & XMIT_GSO) {
2735
2736                 DP(NETIF_MSG_TX_QUEUED,
2737                    "TSO packet len %d  hlen %d  total len %d  tso size %d\n",
2738                    skb->len, hlen, skb_headlen(skb),
2739                    skb_shinfo(skb)->gso_size);
2740
2741                 tx_start_bd->bd_flags.as_bitfield |= ETH_TX_BD_FLAGS_SW_LSO;
2742
2743                 if (unlikely(skb_headlen(skb) > hlen))
2744                         bd_prod = bnx2x_tx_split(bp, txdata, tx_buf,
2745                                                  &tx_start_bd, hlen,
2746                                                  bd_prod, ++nbd);
2747                 if (!CHIP_IS_E1x(bp))
2748                         bnx2x_set_pbd_gso_e2(skb, &pbd_e2_parsing_data,
2749                                              xmit_type);
2750                 else
2751                         bnx2x_set_pbd_gso(skb, pbd_e1x, xmit_type);
2752         }
2753
2754         /* Set the PBD's parsing_data field if not zero
2755          * (for the chips newer than 57711).
2756          */
2757         if (pbd_e2_parsing_data)
2758                 pbd_e2->parsing_data = cpu_to_le32(pbd_e2_parsing_data);
2759
2760         tx_data_bd = (struct eth_tx_bd *)tx_start_bd;
2761
2762         /* Handle fragmented skb */
2763         for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
2764                 skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
2765
2766                 mapping = dma_map_page(&bp->pdev->dev, frag->page,
2767                                        frag->page_offset, frag->size,
2768                                        DMA_TO_DEVICE);
2769                 if (unlikely(dma_mapping_error(&bp->pdev->dev, mapping))) {
2770
2771                         DP(NETIF_MSG_TX_QUEUED, "Unable to map page - "
2772                                                 "dropping packet...\n");
2773
2774                         /* we need unmap all buffers already mapped
2775                          * for this SKB;
2776                          * first_bd->nbd need to be properly updated
2777                          * before call to bnx2x_free_tx_pkt
2778                          */
2779                         first_bd->nbd = cpu_to_le16(nbd);
2780                         bnx2x_free_tx_pkt(bp, txdata,
2781                                           TX_BD(txdata->tx_pkt_prod));
2782                         return NETDEV_TX_OK;
2783                 }
2784
2785                 bd_prod = TX_BD(NEXT_TX_IDX(bd_prod));
2786                 tx_data_bd = &txdata->tx_desc_ring[bd_prod].reg_bd;
2787                 if (total_pkt_bd == NULL)
2788                         total_pkt_bd = &txdata->tx_desc_ring[bd_prod].reg_bd;
2789
2790                 tx_data_bd->addr_hi = cpu_to_le32(U64_HI(mapping));
2791                 tx_data_bd->addr_lo = cpu_to_le32(U64_LO(mapping));
2792                 tx_data_bd->nbytes = cpu_to_le16(frag->size);
2793                 le16_add_cpu(&pkt_size, frag->size);
2794                 nbd++;
2795
2796                 DP(NETIF_MSG_TX_QUEUED,
2797                    "frag %d  bd @%p  addr (%x:%x)  nbytes %d\n",
2798                    i, tx_data_bd, tx_data_bd->addr_hi, tx_data_bd->addr_lo,
2799                    le16_to_cpu(tx_data_bd->nbytes));
2800         }
2801
2802         DP(NETIF_MSG_TX_QUEUED, "last bd @%p\n", tx_data_bd);
2803
2804         /* update with actual num BDs */
2805         first_bd->nbd = cpu_to_le16(nbd);
2806
2807         bd_prod = TX_BD(NEXT_TX_IDX(bd_prod));
2808
2809         /* now send a tx doorbell, counting the next BD
2810          * if the packet contains or ends with it
2811          */
2812         if (TX_BD_POFF(bd_prod) < nbd)
2813                 nbd++;
2814
2815         /* total_pkt_bytes should be set on the first data BD if
2816          * it's not an LSO packet and there is more than one
2817          * data BD. In this case pkt_size is limited by an MTU value.
2818          * However we prefer to set it for an LSO packet (while we don't
2819          * have to) in order to save some CPU cycles in a none-LSO
2820          * case, when we much more care about them.
2821          */
2822         if (total_pkt_bd != NULL)
2823                 total_pkt_bd->total_pkt_bytes = pkt_size;
2824
2825         if (pbd_e1x)
2826                 DP(NETIF_MSG_TX_QUEUED,
2827                    "PBD (E1X) @%p  ip_data %x  ip_hlen %u  ip_id %u  lso_mss %u"
2828                    "  tcp_flags %x  xsum %x  seq %u  hlen %u\n",
2829                    pbd_e1x, pbd_e1x->global_data, pbd_e1x->ip_hlen_w,
2830                    pbd_e1x->ip_id, pbd_e1x->lso_mss, pbd_e1x->tcp_flags,
2831                    pbd_e1x->tcp_pseudo_csum, pbd_e1x->tcp_send_seq,
2832                     le16_to_cpu(pbd_e1x->total_hlen_w));
2833         if (pbd_e2)
2834                 DP(NETIF_MSG_TX_QUEUED,
2835                    "PBD (E2) @%p  dst %x %x %x src %x %x %x parsing_data %x\n",
2836                    pbd_e2, pbd_e2->dst_mac_addr_hi, pbd_e2->dst_mac_addr_mid,
2837                    pbd_e2->dst_mac_addr_lo, pbd_e2->src_mac_addr_hi,
2838                    pbd_e2->src_mac_addr_mid, pbd_e2->src_mac_addr_lo,
2839                    pbd_e2->parsing_data);
2840         DP(NETIF_MSG_TX_QUEUED, "doorbell: nbd %d  bd %u\n", nbd, bd_prod);
2841
2842         txdata->tx_pkt_prod++;
2843         /*
2844          * Make sure that the BD data is updated before updating the producer
2845          * since FW might read the BD right after the producer is updated.
2846          * This is only applicable for weak-ordered memory model archs such
2847          * as IA-64. The following barrier is also mandatory since FW will
2848          * assumes packets must have BDs.
2849          */
2850         wmb();
2851
2852         txdata->tx_db.data.prod += nbd;
2853         barrier();
2854
2855         DOORBELL(bp, txdata->cid, txdata->tx_db.raw);
2856
2857         mmiowb();
2858
2859         txdata->tx_bd_prod += nbd;
2860
2861         if (unlikely(bnx2x_tx_avail(bp, txdata) < MAX_SKB_FRAGS + 3)) {
2862                 netif_tx_stop_queue(txq);
2863
2864                 /* paired memory barrier is in bnx2x_tx_int(), we have to keep
2865                  * ordering of set_bit() in netif_tx_stop_queue() and read of
2866                  * fp->bd_tx_cons */
2867                 smp_mb();
2868
2869                 fp->eth_q_stats.driver_xoff++;
2870                 if (bnx2x_tx_avail(bp, txdata) >= MAX_SKB_FRAGS + 3)
2871                         netif_tx_wake_queue(txq);
2872         }
2873         txdata->tx_pkt++;
2874
2875         return NETDEV_TX_OK;
2876 }
2877
2878 /**
2879  * bnx2x_setup_tc - routine to configure net_device for multi tc
2880  *
2881  * @netdev: net device to configure
2882  * @tc: number of traffic classes to enable
2883  *
2884  * callback connected to the ndo_setup_tc function pointer
2885  */
2886 int bnx2x_setup_tc(struct net_device *dev, u8 num_tc)
2887 {
2888         int cos, prio, count, offset;
2889         struct bnx2x *bp = netdev_priv(dev);
2890
2891         /* setup tc must be called under rtnl lock */
2892         ASSERT_RTNL();
2893
2894         /* no traffic classes requested. aborting */
2895         if (!num_tc) {
2896                 netdev_reset_tc(dev);
2897                 return 0;
2898         }
2899
2900         /* requested to support too many traffic classes */
2901         if (num_tc > bp->max_cos) {
2902                 DP(NETIF_MSG_TX_ERR, "support for too many traffic classes"
2903                                      " requested: %d. max supported is %d",
2904                                      num_tc, bp->max_cos);
2905                 return -EINVAL;
2906         }
2907
2908         /* declare amount of supported traffic classes */
2909         if (netdev_set_num_tc(dev, num_tc)) {
2910                 DP(NETIF_MSG_TX_ERR, "failed to declare %d traffic classes",
2911                                      num_tc);
2912                 return -EINVAL;
2913         }
2914
2915         /* configure priority to traffic class mapping */
2916         for (prio = 0; prio < BNX2X_MAX_PRIORITY; prio++) {
2917                 netdev_set_prio_tc_map(dev, prio, bp->prio_to_cos[prio]);
2918                 DP(BNX2X_MSG_SP, "mapping priority %d to tc %d",
2919                    prio, bp->prio_to_cos[prio]);
2920         }
2921
2922
2923         /* Use this configuration to diffrentiate tc0 from other COSes
2924            This can be used for ets or pfc, and save the effort of setting
2925            up a multio class queue disc or negotiating DCBX with a switch
2926         netdev_set_prio_tc_map(dev, 0, 0);
2927         DP(BNX2X_MSG_SP, "mapping priority %d to tc %d", 0, 0);
2928         for (prio = 1; prio < 16; prio++) {
2929                 netdev_set_prio_tc_map(dev, prio, 1);
2930                 DP(BNX2X_MSG_SP, "mapping priority %d to tc %d", prio, 1);
2931         } */
2932
2933         /* configure traffic class to transmission queue mapping */
2934         for (cos = 0; cos < bp->max_cos; cos++) {
2935                 count = BNX2X_NUM_ETH_QUEUES(bp);
2936                 offset = cos * MAX_TXQS_PER_COS;
2937                 netdev_set_tc_queue(dev, cos, count, offset);
2938                 DP(BNX2X_MSG_SP, "mapping tc %d to offset %d count %d",
2939                    cos, offset, count);
2940         }
2941
2942         return 0;
2943 }
2944
2945 /* called with rtnl_lock */
2946 int bnx2x_change_mac_addr(struct net_device *dev, void *p)
2947 {
2948         struct sockaddr *addr = p;
2949         struct bnx2x *bp = netdev_priv(dev);
2950         int rc = 0;
2951
2952         if (!is_valid_ether_addr((u8 *)(addr->sa_data)))
2953                 return -EINVAL;
2954
2955         if (netif_running(dev))  {
2956                 rc = bnx2x_set_eth_mac(bp, false);
2957                 if (rc)
2958                         return rc;
2959         }
2960
2961         memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
2962
2963         if (netif_running(dev))
2964                 rc = bnx2x_set_eth_mac(bp, true);
2965
2966         return rc;
2967 }
2968
2969 static void bnx2x_free_fp_mem_at(struct bnx2x *bp, int fp_index)
2970 {
2971         union host_hc_status_block *sb = &bnx2x_fp(bp, fp_index, status_blk);
2972         struct bnx2x_fastpath *fp = &bp->fp[fp_index];
2973         u8 cos;
2974
2975         /* Common */
2976 #ifdef BCM_CNIC
2977         if (IS_FCOE_IDX(fp_index)) {
2978                 memset(sb, 0, sizeof(union host_hc_status_block));
2979                 fp->status_blk_mapping = 0;
2980
2981         } else {
2982 #endif
2983                 /* status blocks */
2984                 if (!CHIP_IS_E1x(bp))
2985                         BNX2X_PCI_FREE(sb->e2_sb,
2986                                        bnx2x_fp(bp, fp_index,
2987                                                 status_blk_mapping),
2988                                        sizeof(struct host_hc_status_block_e2));
2989                 else
2990                         BNX2X_PCI_FREE(sb->e1x_sb,
2991                                        bnx2x_fp(bp, fp_index,
2992                                                 status_blk_mapping),
2993                                        sizeof(struct host_hc_status_block_e1x));
2994 #ifdef BCM_CNIC
2995         }
2996 #endif
2997         /* Rx */
2998         if (!skip_rx_queue(bp, fp_index)) {
2999                 bnx2x_free_rx_bds(fp);
3000
3001                 /* fastpath rx rings: rx_buf rx_desc rx_comp */
3002                 BNX2X_FREE(bnx2x_fp(bp, fp_index, rx_buf_ring));
3003                 BNX2X_PCI_FREE(bnx2x_fp(bp, fp_index, rx_desc_ring),
3004                                bnx2x_fp(bp, fp_index, rx_desc_mapping),
3005                                sizeof(struct eth_rx_bd) * NUM_RX_BD);
3006
3007                 BNX2X_PCI_FREE(bnx2x_fp(bp, fp_index, rx_comp_ring),
3008                                bnx2x_fp(bp, fp_index, rx_comp_mapping),
3009                                sizeof(struct eth_fast_path_rx_cqe) *
3010                                NUM_RCQ_BD);
3011
3012                 /* SGE ring */
3013                 BNX2X_FREE(bnx2x_fp(bp, fp_index, rx_page_ring));
3014                 BNX2X_PCI_FREE(bnx2x_fp(bp, fp_index, rx_sge_ring),
3015                                bnx2x_fp(bp, fp_index, rx_sge_mapping),
3016                                BCM_PAGE_SIZE * NUM_RX_SGE_PAGES);
3017         }
3018
3019         /* Tx */
3020         if (!skip_tx_queue(bp, fp_index)) {
3021                 /* fastpath tx rings: tx_buf tx_desc */
3022                 for_each_cos_in_tx_queue(fp, cos) {
3023                         struct bnx2x_fp_txdata *txdata = &fp->txdata[cos];
3024
3025                         DP(BNX2X_MSG_SP,
3026                            "freeing tx memory of fp %d cos %d cid %d",
3027                            fp_index, cos, txdata->cid);
3028
3029                         BNX2X_FREE(txdata->tx_buf_ring);
3030                         BNX2X_PCI_FREE(txdata->tx_desc_ring,
3031                                 txdata->tx_desc_mapping,
3032                                 sizeof(union eth_tx_bd_types) * NUM_TX_BD);
3033                 }
3034         }
3035         /* end of fastpath */
3036 }
3037
3038 void bnx2x_free_fp_mem(struct bnx2x *bp)
3039 {
3040         int i;
3041         for_each_queue(bp, i)
3042                 bnx2x_free_fp_mem_at(bp, i);
3043 }
3044
3045 static inline void set_sb_shortcuts(struct bnx2x *bp, int index)
3046 {
3047         union host_hc_status_block status_blk = bnx2x_fp(bp, index, status_blk);
3048         if (!CHIP_IS_E1x(bp)) {
3049                 bnx2x_fp(bp, index, sb_index_values) =
3050                         (__le16 *)status_blk.e2_sb->sb.index_values;
3051                 bnx2x_fp(bp, index, sb_running_index) =
3052                         (__le16 *)status_blk.e2_sb->sb.running_index;
3053         } else {
3054                 bnx2x_fp(bp, index, sb_index_values) =
3055                         (__le16 *)status_blk.e1x_sb->sb.index_values;
3056                 bnx2x_fp(bp, index, sb_running_index) =
3057                         (__le16 *)status_blk.e1x_sb->sb.running_index;
3058         }
3059 }
3060
3061 static int bnx2x_alloc_fp_mem_at(struct bnx2x *bp, int index)
3062 {
3063         union host_hc_status_block *sb;
3064         struct bnx2x_fastpath *fp = &bp->fp[index];
3065         int ring_size = 0;
3066         u8 cos;
3067
3068         /* if rx_ring_size specified - use it */
3069         int rx_ring_size = bp->rx_ring_size ? bp->rx_ring_size :
3070                            MAX_RX_AVAIL/BNX2X_NUM_RX_QUEUES(bp);
3071
3072         /* allocate at least number of buffers required by FW */
3073         rx_ring_size = max_t(int, bp->disable_tpa ? MIN_RX_SIZE_NONTPA :
3074                                                     MIN_RX_SIZE_TPA,
3075                                   rx_ring_size);
3076
3077         /* Common */
3078         sb = &bnx2x_fp(bp, index, status_blk);
3079 #ifdef BCM_CNIC
3080         if (!IS_FCOE_IDX(index)) {
3081 #endif
3082                 /* status blocks */
3083                 if (!CHIP_IS_E1x(bp))
3084                         BNX2X_PCI_ALLOC(sb->e2_sb,
3085                                 &bnx2x_fp(bp, index, status_blk_mapping),
3086                                 sizeof(struct host_hc_status_block_e2));
3087                 else
3088                         BNX2X_PCI_ALLOC(sb->e1x_sb,
3089                                 &bnx2x_fp(bp, index, status_blk_mapping),
3090                             sizeof(struct host_hc_status_block_e1x));
3091 #ifdef BCM_CNIC
3092         }
3093 #endif
3094
3095         /* FCoE Queue uses Default SB and doesn't ACK the SB, thus no need to
3096          * set shortcuts for it.
3097          */
3098         if (!IS_FCOE_IDX(index))
3099                 set_sb_shortcuts(bp, index);
3100
3101         /* Tx */
3102         if (!skip_tx_queue(bp, index)) {
3103                 /* fastpath tx rings: tx_buf tx_desc */
3104                 for_each_cos_in_tx_queue(fp, cos) {
3105                         struct bnx2x_fp_txdata *txdata = &fp->txdata[cos];
3106
3107                         DP(BNX2X_MSG_SP, "allocating tx memory of "
3108                                          "fp %d cos %d",
3109                            index, cos);
3110
3111                         BNX2X_ALLOC(txdata->tx_buf_ring,
3112                                 sizeof(struct sw_tx_bd) * NUM_TX_BD);
3113                         BNX2X_PCI_ALLOC(txdata->tx_desc_ring,
3114                                 &txdata->tx_desc_mapping,
3115                                 sizeof(union eth_tx_bd_types) * NUM_TX_BD);
3116                 }
3117         }
3118
3119         /* Rx */
3120         if (!skip_rx_queue(bp, index)) {
3121                 /* fastpath rx rings: rx_buf rx_desc rx_comp */
3122                 BNX2X_ALLOC(bnx2x_fp(bp, index, rx_buf_ring),
3123                                 sizeof(struct sw_rx_bd) * NUM_RX_BD);
3124                 BNX2X_PCI_ALLOC(bnx2x_fp(bp, index, rx_desc_ring),
3125                                 &bnx2x_fp(bp, index, rx_desc_mapping),
3126                                 sizeof(struct eth_rx_bd) * NUM_RX_BD);
3127
3128                 BNX2X_PCI_ALLOC(bnx2x_fp(bp, index, rx_comp_ring),
3129                                 &bnx2x_fp(bp, index, rx_comp_mapping),
3130                                 sizeof(struct eth_fast_path_rx_cqe) *
3131                                 NUM_RCQ_BD);
3132
3133                 /* SGE ring */
3134                 BNX2X_ALLOC(bnx2x_fp(bp, index, rx_page_ring),
3135                                 sizeof(struct sw_rx_page) * NUM_RX_SGE);
3136                 BNX2X_PCI_ALLOC(bnx2x_fp(bp, index, rx_sge_ring),
3137                                 &bnx2x_fp(bp, index, rx_sge_mapping),
3138                                 BCM_PAGE_SIZE * NUM_RX_SGE_PAGES);
3139                 /* RX BD ring */
3140                 bnx2x_set_next_page_rx_bd(fp);
3141
3142                 /* CQ ring */
3143                 bnx2x_set_next_page_rx_cq(fp);
3144
3145                 /* BDs */
3146                 ring_size = bnx2x_alloc_rx_bds(fp, rx_ring_size);
3147                 if (ring_size < rx_ring_size)
3148                         goto alloc_mem_err;
3149         }
3150
3151         return 0;
3152
3153 /* handles low memory cases */
3154 alloc_mem_err:
3155         BNX2X_ERR("Unable to allocate full memory for queue %d (size %d)\n",
3156                                                 index, ring_size);
3157         /* FW will drop all packets if queue is not big enough,
3158          * In these cases we disable the queue
3159          * Min size is different for OOO, TPA and non-TPA queues
3160          */
3161         if (ring_size < (fp->disable_tpa ?
3162                                 MIN_RX_SIZE_NONTPA : MIN_RX_SIZE_TPA)) {
3163                         /* release memory allocated for this queue */
3164                         bnx2x_free_fp_mem_at(bp, index);
3165                         return -ENOMEM;
3166         }
3167         return 0;
3168 }
3169
3170 int bnx2x_alloc_fp_mem(struct bnx2x *bp)
3171 {
3172         int i;
3173
3174         /**
3175          * 1. Allocate FP for leading - fatal if error
3176          * 2. {CNIC} Allocate FCoE FP - fatal if error
3177          * 3. {CNIC} Allocate OOO + FWD - disable OOO if error
3178          * 4. Allocate RSS - fix number of queues if error
3179          */
3180
3181         /* leading */
3182         if (bnx2x_alloc_fp_mem_at(bp, 0))
3183                 return -ENOMEM;
3184
3185 #ifdef BCM_CNIC
3186         if (!NO_FCOE(bp))
3187                 /* FCoE */
3188                 if (bnx2x_alloc_fp_mem_at(bp, FCOE_IDX))
3189                         /* we will fail load process instead of mark
3190                          * NO_FCOE_FLAG
3191                          */
3192                         return -ENOMEM;
3193 #endif
3194
3195         /* RSS */
3196         for_each_nondefault_eth_queue(bp, i)
3197                 if (bnx2x_alloc_fp_mem_at(bp, i))
3198                         break;
3199
3200         /* handle memory failures */
3201         if (i != BNX2X_NUM_ETH_QUEUES(bp)) {
3202                 int delta = BNX2X_NUM_ETH_QUEUES(bp) - i;
3203
3204                 WARN_ON(delta < 0);
3205 #ifdef BCM_CNIC
3206                 /**
3207                  * move non eth FPs next to last eth FP
3208                  * must be done in that order
3209                  * FCOE_IDX < FWD_IDX < OOO_IDX
3210                  */
3211
3212                 /* move FCoE fp even NO_FCOE_FLAG is on */
3213                 bnx2x_move_fp(bp, FCOE_IDX, FCOE_IDX - delta);
3214 #endif
3215                 bp->num_queues -= delta;
3216                 BNX2X_ERR("Adjusted num of queues from %d to %d\n",
3217                           bp->num_queues + delta, bp->num_queues);
3218         }
3219
3220         return 0;
3221 }
3222
3223 void bnx2x_free_mem_bp(struct bnx2x *bp)
3224 {
3225         kfree(bp->fp);
3226         kfree(bp->msix_table);
3227         kfree(bp->ilt);
3228 }
3229
3230 int __devinit bnx2x_alloc_mem_bp(struct bnx2x *bp)
3231 {
3232         struct bnx2x_fastpath *fp;
3233         struct msix_entry *tbl;
3234         struct bnx2x_ilt *ilt;
3235         int msix_table_size = 0;
3236
3237         /*
3238          * The biggest MSI-X table we might need is as a maximum number of fast
3239          * path IGU SBs plus default SB (for PF).
3240          */
3241         msix_table_size = bp->igu_sb_cnt + 1;
3242
3243         /* fp array: RSS plus CNIC related L2 queues */
3244         fp = kzalloc((BNX2X_MAX_RSS_COUNT(bp) + NON_ETH_CONTEXT_USE) *
3245                      sizeof(*fp), GFP_KERNEL);
3246         if (!fp)
3247                 goto alloc_err;
3248         bp->fp = fp;
3249
3250         /* msix table */
3251         tbl = kzalloc(msix_table_size * sizeof(*tbl), GFP_KERNEL);
3252         if (!tbl)
3253                 goto alloc_err;
3254         bp->msix_table = tbl;
3255
3256         /* ilt */
3257         ilt = kzalloc(sizeof(*ilt), GFP_KERNEL);
3258         if (!ilt)
3259                 goto alloc_err;
3260         bp->ilt = ilt;
3261
3262         return 0;
3263 alloc_err:
3264         bnx2x_free_mem_bp(bp);
3265         return -ENOMEM;
3266
3267 }
3268
3269 int bnx2x_reload_if_running(struct net_device *dev)
3270 {
3271         struct bnx2x *bp = netdev_priv(dev);
3272
3273         if (unlikely(!netif_running(dev)))
3274                 return 0;
3275
3276         bnx2x_nic_unload(bp, UNLOAD_NORMAL);
3277         return bnx2x_nic_load(bp, LOAD_NORMAL);
3278 }
3279
3280 int bnx2x_get_cur_phy_idx(struct bnx2x *bp)
3281 {
3282         u32 sel_phy_idx = 0;
3283         if (bp->link_params.num_phys <= 1)
3284                 return INT_PHY;
3285
3286         if (bp->link_vars.link_up) {
3287                 sel_phy_idx = EXT_PHY1;
3288                 /* In case link is SERDES, check if the EXT_PHY2 is the one */
3289                 if ((bp->link_vars.link_status & LINK_STATUS_SERDES_LINK) &&
3290                     (bp->link_params.phy[EXT_PHY2].supported & SUPPORTED_FIBRE))
3291                         sel_phy_idx = EXT_PHY2;
3292         } else {
3293
3294                 switch (bnx2x_phy_selection(&bp->link_params)) {
3295                 case PORT_HW_CFG_PHY_SELECTION_HARDWARE_DEFAULT:
3296                 case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY:
3297                 case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY:
3298                        sel_phy_idx = EXT_PHY1;
3299                        break;
3300                 case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY:
3301                 case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY_PRIORITY:
3302                        sel_phy_idx = EXT_PHY2;
3303                        break;
3304                 }
3305         }
3306
3307         return sel_phy_idx;
3308
3309 }
3310 int bnx2x_get_link_cfg_idx(struct bnx2x *bp)
3311 {
3312         u32 sel_phy_idx = bnx2x_get_cur_phy_idx(bp);
3313         /*
3314          * The selected actived PHY is always after swapping (in case PHY
3315          * swapping is enabled). So when swapping is enabled, we need to reverse
3316          * the configuration
3317          */
3318
3319         if (bp->link_params.multi_phy_config &
3320             PORT_HW_CFG_PHY_SWAPPED_ENABLED) {
3321                 if (sel_phy_idx == EXT_PHY1)
3322                         sel_phy_idx = EXT_PHY2;
3323                 else if (sel_phy_idx == EXT_PHY2)
3324                         sel_phy_idx = EXT_PHY1;
3325         }
3326         return LINK_CONFIG_IDX(sel_phy_idx);
3327 }
3328
3329 /* called with rtnl_lock */
3330 int bnx2x_change_mtu(struct net_device *dev, int new_mtu)
3331 {
3332         struct bnx2x *bp = netdev_priv(dev);
3333
3334         if (bp->recovery_state != BNX2X_RECOVERY_DONE) {
3335                 printk(KERN_ERR "Handling parity error recovery. Try again later\n");
3336                 return -EAGAIN;
3337         }
3338
3339         if ((new_mtu > ETH_MAX_JUMBO_PACKET_SIZE) ||
3340             ((new_mtu + ETH_HLEN) < ETH_MIN_PACKET_SIZE))
3341                 return -EINVAL;
3342
3343         /* This does not race with packet allocation
3344          * because the actual alloc size is
3345          * only updated as part of load
3346          */
3347         dev->mtu = new_mtu;
3348
3349         return bnx2x_reload_if_running(dev);
3350 }
3351
3352 u32 bnx2x_fix_features(struct net_device *dev, u32 features)
3353 {
3354         struct bnx2x *bp = netdev_priv(dev);
3355
3356         /* TPA requires Rx CSUM offloading */
3357         if (!(features & NETIF_F_RXCSUM) || bp->disable_tpa)
3358                 features &= ~NETIF_F_LRO;
3359
3360         return features;
3361 }
3362
3363 int bnx2x_set_features(struct net_device *dev, u32 features)
3364 {
3365         struct bnx2x *bp = netdev_priv(dev);
3366         u32 flags = bp->flags;
3367         bool bnx2x_reload = false;
3368
3369         if (features & NETIF_F_LRO)
3370                 flags |= TPA_ENABLE_FLAG;
3371         else
3372                 flags &= ~TPA_ENABLE_FLAG;
3373
3374         if (features & NETIF_F_LOOPBACK) {
3375                 if (bp->link_params.loopback_mode != LOOPBACK_BMAC) {
3376                         bp->link_params.loopback_mode = LOOPBACK_BMAC;
3377                         bnx2x_reload = true;
3378                 }
3379         } else {
3380                 if (bp->link_params.loopback_mode != LOOPBACK_NONE) {
3381                         bp->link_params.loopback_mode = LOOPBACK_NONE;
3382                         bnx2x_reload = true;
3383                 }
3384         }
3385
3386         if (flags ^ bp->flags) {
3387                 bp->flags = flags;
3388                 bnx2x_reload = true;
3389         }
3390
3391         if (bnx2x_reload) {
3392                 if (bp->recovery_state == BNX2X_RECOVERY_DONE)
3393                         return bnx2x_reload_if_running(dev);
3394                 /* else: bnx2x_nic_load() will be called at end of recovery */
3395         }
3396
3397         return 0;
3398 }
3399
3400 void bnx2x_tx_timeout(struct net_device *dev)
3401 {
3402         struct bnx2x *bp = netdev_priv(dev);
3403
3404 #ifdef BNX2X_STOP_ON_ERROR
3405         if (!bp->panic)
3406                 bnx2x_panic();
3407 #endif
3408
3409         smp_mb__before_clear_bit();
3410         set_bit(BNX2X_SP_RTNL_TX_TIMEOUT, &bp->sp_rtnl_state);
3411         smp_mb__after_clear_bit();
3412
3413         /* This allows the netif to be shutdown gracefully before resetting */
3414         schedule_delayed_work(&bp->sp_rtnl_task, 0);
3415 }
3416
3417 int bnx2x_suspend(struct pci_dev *pdev, pm_message_t state)
3418 {
3419         struct net_device *dev = pci_get_drvdata(pdev);
3420         struct bnx2x *bp;
3421
3422         if (!dev) {
3423                 dev_err(&pdev->dev, "BAD net device from bnx2x_init_one\n");
3424                 return -ENODEV;
3425         }
3426         bp = netdev_priv(dev);
3427
3428         rtnl_lock();
3429
3430         pci_save_state(pdev);
3431
3432         if (!netif_running(dev)) {
3433                 rtnl_unlock();
3434                 return 0;
3435         }
3436
3437         netif_device_detach(dev);
3438
3439         bnx2x_nic_unload(bp, UNLOAD_CLOSE);
3440
3441         bnx2x_set_power_state(bp, pci_choose_state(pdev, state));
3442
3443         rtnl_unlock();
3444
3445         return 0;
3446 }
3447
3448 int bnx2x_resume(struct pci_dev *pdev)
3449 {
3450         struct net_device *dev = pci_get_drvdata(pdev);
3451         struct bnx2x *bp;
3452         int rc;
3453
3454         if (!dev) {
3455                 dev_err(&pdev->dev, "BAD net device from bnx2x_init_one\n");
3456                 return -ENODEV;
3457         }
3458         bp = netdev_priv(dev);
3459
3460         if (bp->recovery_state != BNX2X_RECOVERY_DONE) {
3461                 printk(KERN_ERR "Handling parity error recovery. Try again later\n");
3462                 return -EAGAIN;
3463         }
3464
3465         rtnl_lock();
3466
3467         pci_restore_state(pdev);
3468
3469         if (!netif_running(dev)) {
3470                 rtnl_unlock();
3471                 return 0;
3472         }
3473
3474         bnx2x_set_power_state(bp, PCI_D0);
3475         netif_device_attach(dev);
3476
3477         /* Since the chip was reset, clear the FW sequence number */
3478         bp->fw_seq = 0;
3479         rc = bnx2x_nic_load(bp, LOAD_OPEN);
3480
3481         rtnl_unlock();
3482
3483         return rc;
3484 }
3485
3486
3487 void bnx2x_set_ctx_validation(struct bnx2x *bp, struct eth_context *cxt,
3488                               u32 cid)
3489 {
3490         /* ustorm cxt validation */
3491         cxt->ustorm_ag_context.cdu_usage =
3492                 CDU_RSRVD_VALUE_TYPE_A(HW_CID(bp, cid),
3493                         CDU_REGION_NUMBER_UCM_AG, ETH_CONNECTION_TYPE);
3494         /* xcontext validation */
3495         cxt->xstorm_ag_context.cdu_reserved =
3496                 CDU_RSRVD_VALUE_TYPE_A(HW_CID(bp, cid),
3497                         CDU_REGION_NUMBER_XCM_AG, ETH_CONNECTION_TYPE);
3498 }
3499
3500 static inline void storm_memset_hc_timeout(struct bnx2x *bp, u8 port,
3501                                              u8 fw_sb_id, u8 sb_index,
3502                                              u8 ticks)
3503 {
3504
3505         u32 addr = BAR_CSTRORM_INTMEM +
3506                    CSTORM_STATUS_BLOCK_DATA_TIMEOUT_OFFSET(fw_sb_id, sb_index);
3507         REG_WR8(bp, addr, ticks);
3508         DP(NETIF_MSG_HW, "port %x fw_sb_id %d sb_index %d ticks %d\n",
3509                           port, fw_sb_id, sb_index, ticks);
3510 }
3511
3512 static inline void storm_memset_hc_disable(struct bnx2x *bp, u8 port,
3513                                              u16 fw_sb_id, u8 sb_index,
3514                                              u8 disable)
3515 {
3516         u32 enable_flag = disable ? 0 : (1 << HC_INDEX_DATA_HC_ENABLED_SHIFT);
3517         u32 addr = BAR_CSTRORM_INTMEM +
3518                    CSTORM_STATUS_BLOCK_DATA_FLAGS_OFFSET(fw_sb_id, sb_index);
3519         u16 flags = REG_RD16(bp, addr);
3520         /* clear and set */
3521         flags &= ~HC_INDEX_DATA_HC_ENABLED;
3522         flags |= enable_flag;
3523         REG_WR16(bp, addr, flags);
3524         DP(NETIF_MSG_HW, "port %x fw_sb_id %d sb_index %d disable %d\n",
3525                           port, fw_sb_id, sb_index, disable);
3526 }
3527
3528 void bnx2x_update_coalesce_sb_index(struct bnx2x *bp, u8 fw_sb_id,
3529                                     u8 sb_index, u8 disable, u16 usec)
3530 {
3531         int port = BP_PORT(bp);
3532         u8 ticks = usec / BNX2X_BTR;
3533
3534         storm_memset_hc_timeout(bp, port, fw_sb_id, sb_index, ticks);
3535
3536         disable = disable ? 1 : (usec ? 0 : 1);
3537         storm_memset_hc_disable(bp, port, fw_sb_id, sb_index, disable);
3538 }