2 * Linux Ethernet device driver for the 3Com Etherlink Plus (3C505)
3 * By Craig Southeren, Juha Laiho and Philip Blundell
5 * 3c505.c This module implements an interface to the 3Com
6 * Etherlink Plus (3c505) Ethernet card. Linux device
7 * driver interface reverse engineered from the Linux 3C509
8 * device drivers. Some 3C505 information gleaned from
9 * the Crynwr packet driver. Still this driver would not
10 * be here without 3C505 technical reference provided by
13 * $Id: 3c505.c,v 1.10 1996/04/16 13:06:27 phil Exp $
15 * Authors: Linux 3c505 device driver by
16 * Craig Southeren, <craigs@ineluki.apana.org.au>
18 * Andrew Tridgell, <tridge@nimbus.anu.edu.au>
19 * Auto irq/address, tuning, cleanup and v1.1.4+ kernel mods by
20 * Juha Laiho, <jlaiho@ichaos.nullnet.fi>
21 * Linux 3C509 driver by
22 * Donald Becker, <becker@super.org>
23 * (Now at <becker@scyld.com>)
24 * Crynwr packet driver by
25 * Krishnan Gopalan and Gregg Stefancik,
26 * Clemson University Engineering Computer Operations.
27 * Portions of the code have been adapted from the 3c505
28 * driver for NCSA Telnet by Bruce Orchard and later
29 * modified by Warren Van Houten and krus@diku.dk.
30 * 3C505 technical information provided by
31 * Terry Murphy, of 3Com Network Adapter Division
32 * Linux 1.3.0 changes by
33 * Alan Cox <Alan.Cox@linux.org>
34 * More debugging, DMA support, currently maintained by
35 * Philip Blundell <philb@gnu.org>
36 * Multicard/soft configurable dma channel/rev 2 hardware support
37 * by Christopher Collins <ccollins@pcug.org.au>
38 * Ethtool support (jgarzik), 11/17/2001
41 #define DRV_NAME "3c505"
42 #define DRV_VERSION "1.10a"
45 /* Theory of operation:
47 * The 3c505 is quite an intelligent board. All communication with it is done
48 * by means of Primary Command Blocks (PCBs); these are transferred using PIO
49 * through the command register. The card has 256k of on-board RAM, which is
50 * used to buffer received packets. It might seem at first that more buffers
51 * are better, but in fact this isn't true. From my tests, it seems that
52 * more than about 10 buffers are unnecessary, and there is a noticeable
53 * performance hit in having more active on the card. So the majority of the
54 * card's memory isn't, in fact, used. Sadly, the card only has one transmit
55 * buffer and, short of loading our own firmware into it (which is what some
56 * drivers resort to) there's nothing we can do about this.
58 * We keep up to 4 "receive packet" commands active on the board at a time.
59 * When a packet comes in, so long as there is a receive command active, the
60 * board will send us a "packet received" PCB and then add the data for that
61 * packet to the DMA queue. If a DMA transfer is not already in progress, we
62 * set one up to start uploading the data. We have to maintain a list of
63 * backlogged receive packets, because the card may decide to tell us about
64 * a newly-arrived packet at any time, and we may not be able to start a DMA
65 * transfer immediately (ie one may already be going on). We can't NAK the
66 * PCB, because then it would throw the packet away.
68 * Trying to send a PCB to the card at the wrong moment seems to have bad
69 * effects. If we send it a transmit PCB while a receive DMA is happening,
70 * it will just NAK the PCB and so we will have wasted our time. Worse, it
71 * sometimes seems to interrupt the transfer. The majority of the low-level
72 * code is protected by one huge semaphore -- "busy" -- which is set whenever
73 * it probably isn't safe to do anything to the card. The receive routine
74 * must gain a lock on "busy" before it can start a DMA transfer, and the
75 * transmit routine must gain a lock before it sends the first PCB to the card.
76 * The send_pcb() routine also has an internal semaphore to protect it against
77 * being re-entered (which would be disastrous) -- this is needed because
78 * several things can happen asynchronously (re-priming the receiver and
79 * asking the card for statistics, for example). send_pcb() will also refuse
80 * to talk to the card at all if a DMA upload is happening. The higher-level
81 * networking code will reschedule a later retry if some part of the driver
82 * is blocked. In practice, this doesn't seem to happen very often.
85 /* This driver may now work with revision 2.x hardware, since all the read
86 * operations on the HCR have been removed (we now keep our own softcopy).
87 * But I don't have an old card to test it on.
89 * This has had the bad effect that the autoprobe routine is now a bit
90 * less friendly to other devices. However, it was never very good.
91 * before, so I doubt it will hurt anybody.
94 /* The driver is a mess. I took Craig's and Juha's code, and hacked it firstly
95 * to make it more reliable, and secondly to add DMA mode. Many things could
96 * probably be done better; the concurrency protection is particularly awful.
99 #include <linux/module.h>
100 #include <linux/kernel.h>
101 #include <linux/string.h>
102 #include <linux/interrupt.h>
103 #include <linux/errno.h>
104 #include <linux/in.h>
105 #include <linux/slab.h>
106 #include <linux/ioport.h>
107 #include <linux/spinlock.h>
108 #include <linux/ethtool.h>
109 #include <linux/delay.h>
110 #include <linux/bitops.h>
112 #include <asm/uaccess.h>
116 #include <linux/netdevice.h>
117 #include <linux/etherdevice.h>
118 #include <linux/skbuff.h>
119 #include <linux/init.h>
123 /*********************************************************
125 * define debug messages here as common strings to reduce space
127 *********************************************************/
129 static const char filename[] = __FILE__;
131 static const char timeout_msg[] = "*** timeout at %s:%s (line %d) ***\n";
132 #define TIMEOUT_MSG(lineno) \
133 printk(timeout_msg, filename,__FUNCTION__,(lineno))
135 static const char invalid_pcb_msg[] =
136 "*** invalid pcb length %d at %s:%s (line %d) ***\n";
137 #define INVALID_PCB_MSG(len) \
138 printk(invalid_pcb_msg, (len),filename,__FUNCTION__,__LINE__)
140 static char search_msg[] __initdata = KERN_INFO "%s: Looking for 3c505 adapter at address %#x...";
142 static char stilllooking_msg[] __initdata = "still looking...";
144 static char found_msg[] __initdata = "found.\n";
146 static char notfound_msg[] __initdata = "not found (reason = %d)\n";
148 static char couldnot_msg[] __initdata = KERN_INFO "%s: 3c505 not found\n";
150 /*********************************************************
152 * various other debug stuff
154 *********************************************************/
157 static int elp_debug = ELP_DEBUG;
159 static int elp_debug;
161 #define debug elp_debug
164 * 0 = no messages (well, some)
165 * 1 = messages when high level commands performed
166 * 2 = messages when low level commands performed
167 * 3 = messages when interrupts received
170 /*****************************************************************
174 *****************************************************************/
185 /*****************************************************************
187 * List of I/O-addresses we try to auto-sense
188 * Last element MUST BE 0!
189 *****************************************************************/
191 static int addr_list[] __initdata = {0x300, 0x280, 0x310, 0};
193 /* Dma Memory related stuff */
195 static unsigned long dma_mem_alloc(int size)
197 int order = get_order(size);
198 return __get_dma_pages(GFP_KERNEL, order);
202 /*****************************************************************
204 * Functions for I/O (note the inline !)
206 *****************************************************************/
208 static inline unsigned char inb_status(unsigned int base_addr)
210 return inb(base_addr + PORT_STATUS);
213 static inline int inb_command(unsigned int base_addr)
215 return inb(base_addr + PORT_COMMAND);
218 static inline void outb_control(unsigned char val, struct net_device *dev)
220 outb(val, dev->base_addr + PORT_CONTROL);
221 ((elp_device *)(dev->priv))->hcr_val = val;
224 #define HCR_VAL(x) (((elp_device *)((x)->priv))->hcr_val)
226 static inline void outb_command(unsigned char val, unsigned int base_addr)
228 outb(val, base_addr + PORT_COMMAND);
231 static inline unsigned int backlog_next(unsigned int n)
233 return (n + 1) % BACKLOG_SIZE;
236 /*****************************************************************
238 * useful functions for accessing the adapter
240 *****************************************************************/
243 * use this routine when accessing the ASF bits as they are
244 * changed asynchronously by the adapter
247 /* get adapter PCB status */
248 #define GET_ASF(addr) \
249 (get_status(addr)&ASF_PCB_MASK)
251 static inline int get_status(unsigned int base_addr)
253 unsigned long timeout = jiffies + 10*HZ/100;
256 stat1 = inb_status(base_addr);
257 } while (stat1 != inb_status(base_addr) && time_before(jiffies, timeout));
258 if (time_after_eq(jiffies, timeout))
259 TIMEOUT_MSG(__LINE__);
263 static inline void set_hsf(struct net_device *dev, int hsf)
265 elp_device *adapter = dev->priv;
268 spin_lock_irqsave(&adapter->lock, flags);
269 outb_control((HCR_VAL(dev) & ~HSF_PCB_MASK) | hsf, dev);
270 spin_unlock_irqrestore(&adapter->lock, flags);
273 static int start_receive(struct net_device *, pcb_struct *);
275 static inline void adapter_reset(struct net_device *dev)
277 unsigned long timeout;
278 elp_device *adapter = dev->priv;
279 unsigned char orig_hcr = adapter->hcr_val;
281 outb_control(0, dev);
283 if (inb_status(dev->base_addr) & ACRF) {
285 inb_command(dev->base_addr);
286 timeout = jiffies + 2*HZ/100;
287 while (time_before_eq(jiffies, timeout) && !(inb_status(dev->base_addr) & ACRF));
288 } while (inb_status(dev->base_addr) & ACRF);
289 set_hsf(dev, HSF_PCB_NAK);
291 outb_control(adapter->hcr_val | ATTN | DIR, dev);
293 outb_control(adapter->hcr_val & ~ATTN, dev);
295 outb_control(adapter->hcr_val | FLSH, dev);
297 outb_control(adapter->hcr_val & ~FLSH, dev);
300 outb_control(orig_hcr, dev);
301 if (!start_receive(dev, &adapter->tx_pcb))
302 printk(KERN_ERR "%s: start receive command failed \n", dev->name);
305 /* Check to make sure that a DMA transfer hasn't timed out. This should
306 * never happen in theory, but seems to occur occasionally if the card gets
307 * prodded at the wrong time.
309 static inline void check_3c505_dma(struct net_device *dev)
311 elp_device *adapter = dev->priv;
312 if (adapter->dmaing && time_after(jiffies, adapter->current_dma.start_time + 10)) {
313 unsigned long flags, f;
314 printk(KERN_ERR "%s: DMA %s timed out, %d bytes left\n", dev->name, adapter->current_dma.direction ? "download" : "upload", get_dma_residue(dev->dma));
315 spin_lock_irqsave(&adapter->lock, flags);
320 disable_dma(dev->dma);
323 if (adapter->rx_active)
324 adapter->rx_active--;
325 outb_control(adapter->hcr_val & ~(DMAE | TCEN | DIR), dev);
326 spin_unlock_irqrestore(&adapter->lock, flags);
330 /* Primitive functions used by send_pcb() */
331 static inline unsigned int send_pcb_slow(unsigned int base_addr, unsigned char byte)
333 unsigned long timeout;
334 outb_command(byte, base_addr);
335 for (timeout = jiffies + 5*HZ/100; time_before(jiffies, timeout);) {
336 if (inb_status(base_addr) & HCRE)
339 printk(KERN_WARNING "3c505: send_pcb_slow timed out\n");
343 static inline unsigned int send_pcb_fast(unsigned int base_addr, unsigned char byte)
345 unsigned int timeout;
346 outb_command(byte, base_addr);
347 for (timeout = 0; timeout < 40000; timeout++) {
348 if (inb_status(base_addr) & HCRE)
351 printk(KERN_WARNING "3c505: send_pcb_fast timed out\n");
355 /* Check to see if the receiver needs restarting, and kick it if so */
356 static inline void prime_rx(struct net_device *dev)
358 elp_device *adapter = dev->priv;
359 while (adapter->rx_active < ELP_RX_PCBS && netif_running(dev)) {
360 if (!start_receive(dev, &adapter->itx_pcb))
365 /*****************************************************************
368 * Send a PCB to the adapter.
370 * output byte to command reg --<--+
371 * wait until HCRE is non zero |
372 * loop until all bytes sent -->--+
373 * set HSF1 and HSF2 to 1
375 * wait until ASF give ACK or NAK
376 * set HSF1 and HSF2 to 0
378 *****************************************************************/
380 /* This can be quite slow -- the adapter is allowed to take up to 40ms
381 * to respond to the initial interrupt.
383 * We run initially with interrupts turned on, but with a semaphore set
384 * so that nobody tries to re-enter this code. Once the first byte has
385 * gone through, we turn interrupts off and then send the others (the
386 * timeout is reduced to 500us).
389 static int send_pcb(struct net_device *dev, pcb_struct * pcb)
392 unsigned long timeout;
393 elp_device *adapter = dev->priv;
396 check_3c505_dma(dev);
398 if (adapter->dmaing && adapter->current_dma.direction == 0)
401 /* Avoid contention */
402 if (test_and_set_bit(1, &adapter->send_pcb_semaphore)) {
403 if (elp_debug >= 3) {
404 printk(KERN_DEBUG "%s: send_pcb entered while threaded\n", dev->name);
409 * load each byte into the command register and
410 * wait for the HCRE bit to indicate the adapter
415 if (send_pcb_slow(dev->base_addr, pcb->command))
418 spin_lock_irqsave(&adapter->lock, flags);
420 if (send_pcb_fast(dev->base_addr, pcb->length))
423 for (i = 0; i < pcb->length; i++) {
424 if (send_pcb_fast(dev->base_addr, pcb->data.raw[i]))
428 outb_control(adapter->hcr_val | 3, dev); /* signal end of PCB */
429 outb_command(2 + pcb->length, dev->base_addr);
431 /* now wait for the acknowledgement */
432 spin_unlock_irqrestore(&adapter->lock, flags);
434 for (timeout = jiffies + 5*HZ/100; time_before(jiffies, timeout);) {
435 switch (GET_ASF(dev->base_addr)) {
437 adapter->send_pcb_semaphore = 0;
442 printk(KERN_DEBUG "%s: send_pcb got NAK\n", dev->name);
449 printk(KERN_DEBUG "%s: timeout waiting for PCB acknowledge (status %02x)\n", dev->name, inb_status(dev->base_addr));
453 spin_unlock_irqrestore(&adapter->lock, flags);
455 adapter->send_pcb_semaphore = 0;
460 /*****************************************************************
463 * Read a PCB from the adapter
465 * wait for ACRF to be non-zero ---<---+
467 * if ASF1 and ASF2 were not both one |
468 * before byte was read, loop --->---+
469 * set HSF1 and HSF2 for ack
471 *****************************************************************/
473 static int receive_pcb(struct net_device *dev, pcb_struct * pcb)
478 unsigned long timeout;
481 elp_device *adapter = dev->priv;
485 /* get the command code */
486 timeout = jiffies + 2*HZ/100;
487 while (((stat = get_status(dev->base_addr)) & ACRF) == 0 && time_before(jiffies, timeout));
488 if (time_after_eq(jiffies, timeout)) {
489 TIMEOUT_MSG(__LINE__);
492 pcb->command = inb_command(dev->base_addr);
494 /* read the data length */
495 timeout = jiffies + 3*HZ/100;
496 while (((stat = get_status(dev->base_addr)) & ACRF) == 0 && time_before(jiffies, timeout));
497 if (time_after_eq(jiffies, timeout)) {
498 TIMEOUT_MSG(__LINE__);
499 printk(KERN_INFO "%s: status %02x\n", dev->name, stat);
502 pcb->length = inb_command(dev->base_addr);
504 if (pcb->length > MAX_PCB_DATA) {
505 INVALID_PCB_MSG(pcb->length);
510 spin_lock_irqsave(&adapter->lock, flags);
514 while (((stat = get_status(dev->base_addr)) & ACRF) == 0 && j++ < 20000);
515 pcb->data.raw[i++] = inb_command(dev->base_addr);
516 if (i > MAX_PCB_DATA)
518 } while ((stat & ASF_PCB_MASK) != ASF_PCB_END && j < 20000);
519 spin_unlock_irqrestore(&adapter->lock, flags);
521 TIMEOUT_MSG(__LINE__);
524 /* woops, the last "data" byte was really the length! */
525 total_length = pcb->data.raw[--i];
527 /* safety check total length vs data length */
528 if (total_length != (pcb->length + 2)) {
530 printk(KERN_WARNING "%s: mangled PCB received\n", dev->name);
531 set_hsf(dev, HSF_PCB_NAK);
535 if (pcb->command == CMD_RECEIVE_PACKET_COMPLETE) {
536 if (test_and_set_bit(0, (void *) &adapter->busy)) {
537 if (backlog_next(adapter->rx_backlog.in) == adapter->rx_backlog.out) {
538 set_hsf(dev, HSF_PCB_NAK);
539 printk(KERN_WARNING "%s: PCB rejected, transfer in progress and backlog full\n", dev->name);
547 set_hsf(dev, HSF_PCB_ACK);
551 /******************************************************
553 * queue a receive command on the adapter so we will get an
554 * interrupt when a packet is received.
556 ******************************************************/
558 static int start_receive(struct net_device *dev, pcb_struct * tx_pcb)
561 elp_device *adapter = dev->priv;
564 printk(KERN_DEBUG "%s: restarting receiver\n", dev->name);
565 tx_pcb->command = CMD_RECEIVE_PACKET;
566 tx_pcb->length = sizeof(struct Rcv_pkt);
567 tx_pcb->data.rcv_pkt.buf_seg
568 = tx_pcb->data.rcv_pkt.buf_ofs = 0; /* Unused */
569 tx_pcb->data.rcv_pkt.buf_len = 1600;
570 tx_pcb->data.rcv_pkt.timeout = 0; /* set timeout to zero */
571 status = send_pcb(dev, tx_pcb);
573 adapter->rx_active++;
577 /******************************************************
579 * extract a packet from the adapter
580 * this routine is only called from within the interrupt
581 * service routine, so no cli/sti calls are needed
582 * note that the length is always assumed to be even
584 ******************************************************/
586 static void receive_packet(struct net_device *dev, int len)
589 elp_device *adapter = dev->priv;
594 rlen = (len + 1) & ~1;
595 skb = dev_alloc_skb(rlen + 2);
598 printk(KERN_WARNING "%s: memory squeeze, dropping packet\n", dev->name);
599 target = adapter->dma_buffer;
600 adapter->current_dma.target = NULL;
606 target = skb_put(skb, rlen);
607 if ((unsigned long)(target + rlen) >= MAX_DMA_ADDRESS) {
608 adapter->current_dma.target = target;
609 target = adapter->dma_buffer;
611 adapter->current_dma.target = NULL;
614 /* if this happens, we die */
615 if (test_and_set_bit(0, (void *) &adapter->dmaing))
616 printk(KERN_ERR "%s: rx blocked, DMA in progress, dir %d\n", dev->name, adapter->current_dma.direction);
619 adapter->current_dma.direction = 0;
620 adapter->current_dma.length = rlen;
621 adapter->current_dma.skb = skb;
622 adapter->current_dma.start_time = jiffies;
624 outb_control(adapter->hcr_val | DIR | TCEN | DMAE, dev);
626 flags=claim_dma_lock();
627 disable_dma(dev->dma);
628 clear_dma_ff(dev->dma);
629 set_dma_mode(dev->dma, 0x04); /* dma read */
630 set_dma_addr(dev->dma, isa_virt_to_bus(target));
631 set_dma_count(dev->dma, rlen);
632 enable_dma(dev->dma);
633 release_dma_lock(flags);
635 if (elp_debug >= 3) {
636 printk(KERN_DEBUG "%s: rx DMA transfer started\n", dev->name);
639 if (adapter->rx_active)
640 adapter->rx_active--;
643 printk(KERN_WARNING "%s: receive_packet called, busy not set.\n", dev->name);
646 /******************************************************
650 ******************************************************/
652 static irqreturn_t elp_interrupt(int irq, void *dev_id, struct pt_regs *reg_ptr)
657 struct net_device *dev;
659 unsigned long timeout;
662 adapter = (elp_device *) dev->priv;
664 spin_lock(&adapter->lock);
668 * has a DMA transfer finished?
670 if (inb_status(dev->base_addr) & DONE) {
671 if (!adapter->dmaing) {
672 printk(KERN_WARNING "%s: phantom DMA completed\n", dev->name);
674 if (elp_debug >= 3) {
675 printk(KERN_DEBUG "%s: %s DMA complete, status %02x\n", dev->name, adapter->current_dma.direction ? "tx" : "rx", inb_status(dev->base_addr));
678 outb_control(adapter->hcr_val & ~(DMAE | TCEN | DIR), dev);
679 if (adapter->current_dma.direction) {
680 dev_kfree_skb_irq(adapter->current_dma.skb);
682 struct sk_buff *skb = adapter->current_dma.skb;
684 if (adapter->current_dma.target) {
685 /* have already done the skb_put() */
686 memcpy(adapter->current_dma.target, adapter->dma_buffer, adapter->current_dma.length);
688 skb->protocol = eth_type_trans(skb,dev);
689 adapter->stats.rx_bytes += skb->len;
691 dev->last_rx = jiffies;
695 if (adapter->rx_backlog.in != adapter->rx_backlog.out) {
696 int t = adapter->rx_backlog.length[adapter->rx_backlog.out];
697 adapter->rx_backlog.out = backlog_next(adapter->rx_backlog.out);
699 printk(KERN_DEBUG "%s: receiving backlogged packet (%d)\n", dev->name, t);
700 receive_packet(dev, t);
705 /* has one timed out? */
706 check_3c505_dma(dev);
710 * receive a PCB from the adapter
712 timeout = jiffies + 3*HZ/100;
713 while ((inb_status(dev->base_addr) & ACRF) != 0 && time_before(jiffies, timeout)) {
714 if (receive_pcb(dev, &adapter->irx_pcb)) {
715 switch (adapter->irx_pcb.command)
720 * received a packet - this must be handled fast
723 case CMD_RECEIVE_PACKET_COMPLETE:
724 /* if the device isn't open, don't pass packets up the stack */
725 if (!netif_running(dev))
727 len = adapter->irx_pcb.data.rcv_resp.pkt_len;
728 dlen = adapter->irx_pcb.data.rcv_resp.buf_len;
729 if (adapter->irx_pcb.data.rcv_resp.timeout != 0) {
730 printk(KERN_ERR "%s: interrupt - packet not received correctly\n", dev->name);
732 if (elp_debug >= 3) {
733 printk(KERN_DEBUG "%s: interrupt - packet received of length %i (%i)\n", dev->name, len, dlen);
735 if (adapter->irx_pcb.command == 0xff) {
737 printk(KERN_DEBUG "%s: adding packet to backlog (len = %d)\n", dev->name, dlen);
738 adapter->rx_backlog.length[adapter->rx_backlog.in] = dlen;
739 adapter->rx_backlog.in = backlog_next(adapter->rx_backlog.in);
741 receive_packet(dev, dlen);
744 printk(KERN_DEBUG "%s: packet received\n", dev->name);
749 * 82586 configured correctly
751 case CMD_CONFIGURE_82586_RESPONSE:
752 adapter->got[CMD_CONFIGURE_82586] = 1;
754 printk(KERN_DEBUG "%s: interrupt - configure response received\n", dev->name);
758 * Adapter memory configuration
760 case CMD_CONFIGURE_ADAPTER_RESPONSE:
761 adapter->got[CMD_CONFIGURE_ADAPTER_MEMORY] = 1;
763 printk(KERN_DEBUG "%s: Adapter memory configuration %s.\n", dev->name,
764 adapter->irx_pcb.data.failed ? "failed" : "succeeded");
768 * Multicast list loading
770 case CMD_LOAD_MULTICAST_RESPONSE:
771 adapter->got[CMD_LOAD_MULTICAST_LIST] = 1;
773 printk(KERN_DEBUG "%s: Multicast address list loading %s.\n", dev->name,
774 adapter->irx_pcb.data.failed ? "failed" : "succeeded");
778 * Station address setting
780 case CMD_SET_ADDRESS_RESPONSE:
781 adapter->got[CMD_SET_STATION_ADDRESS] = 1;
783 printk(KERN_DEBUG "%s: Ethernet address setting %s.\n", dev->name,
784 adapter->irx_pcb.data.failed ? "failed" : "succeeded");
789 * received board statistics
791 case CMD_NETWORK_STATISTICS_RESPONSE:
792 adapter->stats.rx_packets += adapter->irx_pcb.data.netstat.tot_recv;
793 adapter->stats.tx_packets += adapter->irx_pcb.data.netstat.tot_xmit;
794 adapter->stats.rx_crc_errors += adapter->irx_pcb.data.netstat.err_CRC;
795 adapter->stats.rx_frame_errors += adapter->irx_pcb.data.netstat.err_align;
796 adapter->stats.rx_fifo_errors += adapter->irx_pcb.data.netstat.err_ovrrun;
797 adapter->stats.rx_over_errors += adapter->irx_pcb.data.netstat.err_res;
798 adapter->got[CMD_NETWORK_STATISTICS] = 1;
800 printk(KERN_DEBUG "%s: interrupt - statistics response received\n", dev->name);
806 case CMD_TRANSMIT_PACKET_COMPLETE:
808 printk(KERN_DEBUG "%s: interrupt - packet sent\n", dev->name);
809 if (!netif_running(dev))
811 switch (adapter->irx_pcb.data.xmit_resp.c_stat) {
813 adapter->stats.tx_aborted_errors++;
814 printk(KERN_INFO "%s: transmit timed out, network cable problem?\n", dev->name);
817 adapter->stats.tx_fifo_errors++;
818 printk(KERN_INFO "%s: transmit timed out, FIFO underrun\n", dev->name);
821 netif_wake_queue(dev);
828 printk(KERN_DEBUG "%s: unknown PCB received - %2.2x\n", dev->name, adapter->irx_pcb.command);
832 printk(KERN_WARNING "%s: failed to read PCB on interrupt\n", dev->name);
837 } while (icount++ < 5 && (inb_status(dev->base_addr) & (ACRF | DONE)));
842 * indicate no longer in interrupt routine
844 spin_unlock(&adapter->lock);
849 /******************************************************
853 ******************************************************/
855 static int elp_open(struct net_device *dev)
863 printk(KERN_DEBUG "%s: request to open device\n", dev->name);
866 * make sure we actually found the device
868 if (adapter == NULL) {
869 printk(KERN_ERR "%s: Opening a non-existent physical device\n", dev->name);
873 * disable interrupts on the board
875 outb_control(0, dev);
878 * clear any pending interrupts
880 inb_command(dev->base_addr);
884 * no receive PCBs active
886 adapter->rx_active = 0;
889 adapter->send_pcb_semaphore = 0;
890 adapter->rx_backlog.in = 0;
891 adapter->rx_backlog.out = 0;
893 spin_lock_init(&adapter->lock);
896 * install our interrupt service routine
898 if ((retval = request_irq(dev->irq, &elp_interrupt, 0, dev->name, dev))) {
899 printk(KERN_ERR "%s: could not allocate IRQ%d\n", dev->name, dev->irq);
902 if ((retval = request_dma(dev->dma, dev->name))) {
903 free_irq(dev->irq, dev);
904 printk(KERN_ERR "%s: could not allocate DMA%d channel\n", dev->name, dev->dma);
907 adapter->dma_buffer = (void *) dma_mem_alloc(DMA_BUFFER_SIZE);
908 if (!adapter->dma_buffer) {
909 printk(KERN_ERR "%s: could not allocate DMA buffer\n", dev->name);
911 free_irq(dev->irq, dev);
917 * enable interrupts on the board
919 outb_control(CMDE, dev);
922 * configure adapter memory: we need 10 multicast addresses, default==0
925 printk(KERN_DEBUG "%s: sending 3c505 memory configuration command\n", dev->name);
926 adapter->tx_pcb.command = CMD_CONFIGURE_ADAPTER_MEMORY;
927 adapter->tx_pcb.data.memconf.cmd_q = 10;
928 adapter->tx_pcb.data.memconf.rcv_q = 20;
929 adapter->tx_pcb.data.memconf.mcast = 10;
930 adapter->tx_pcb.data.memconf.frame = 20;
931 adapter->tx_pcb.data.memconf.rcv_b = 20;
932 adapter->tx_pcb.data.memconf.progs = 0;
933 adapter->tx_pcb.length = sizeof(struct Memconf);
934 adapter->got[CMD_CONFIGURE_ADAPTER_MEMORY] = 0;
935 if (!send_pcb(dev, &adapter->tx_pcb))
936 printk(KERN_ERR "%s: couldn't send memory configuration command\n", dev->name);
938 unsigned long timeout = jiffies + TIMEOUT;
939 while (adapter->got[CMD_CONFIGURE_ADAPTER_MEMORY] == 0 && time_before(jiffies, timeout));
940 if (time_after_eq(jiffies, timeout))
941 TIMEOUT_MSG(__LINE__);
946 * configure adapter to receive broadcast messages and wait for response
949 printk(KERN_DEBUG "%s: sending 82586 configure command\n", dev->name);
950 adapter->tx_pcb.command = CMD_CONFIGURE_82586;
951 adapter->tx_pcb.data.configure = NO_LOOPBACK | RECV_BROAD;
952 adapter->tx_pcb.length = 2;
953 adapter->got[CMD_CONFIGURE_82586] = 0;
954 if (!send_pcb(dev, &adapter->tx_pcb))
955 printk(KERN_ERR "%s: couldn't send 82586 configure command\n", dev->name);
957 unsigned long timeout = jiffies + TIMEOUT;
958 while (adapter->got[CMD_CONFIGURE_82586] == 0 && time_before(jiffies, timeout));
959 if (time_after_eq(jiffies, timeout))
960 TIMEOUT_MSG(__LINE__);
963 /* enable burst-mode DMA */
964 /* outb(0x1, dev->base_addr + PORT_AUXDMA); */
967 * queue receive commands to provide buffering
971 printk(KERN_DEBUG "%s: %d receive PCBs active\n", dev->name, adapter->rx_active);
974 * device is now officially open!
977 netif_start_queue(dev);
982 /******************************************************
984 * send a packet to the adapter
986 ******************************************************/
988 static int send_packet(struct net_device *dev, struct sk_buff *skb)
990 elp_device *adapter = dev->priv;
991 unsigned long target;
995 * make sure the length is even and no shorter than 60 bytes
997 unsigned int nlen = (((skb->len < 60) ? 60 : skb->len) + 1) & (~1);
999 if (test_and_set_bit(0, (void *) &adapter->busy)) {
1001 printk(KERN_DEBUG "%s: transmit blocked\n", dev->name);
1005 adapter->stats.tx_bytes += nlen;
1008 * send the adapter a transmit packet command. Ignore segment and offset
1009 * and make sure the length is even
1011 adapter->tx_pcb.command = CMD_TRANSMIT_PACKET;
1012 adapter->tx_pcb.length = sizeof(struct Xmit_pkt);
1013 adapter->tx_pcb.data.xmit_pkt.buf_ofs
1014 = adapter->tx_pcb.data.xmit_pkt.buf_seg = 0; /* Unused */
1015 adapter->tx_pcb.data.xmit_pkt.pkt_len = nlen;
1017 if (!send_pcb(dev, &adapter->tx_pcb)) {
1021 /* if this happens, we die */
1022 if (test_and_set_bit(0, (void *) &adapter->dmaing))
1023 printk(KERN_DEBUG "%s: tx: DMA %d in progress\n", dev->name, adapter->current_dma.direction);
1025 adapter->current_dma.direction = 1;
1026 adapter->current_dma.start_time = jiffies;
1028 if ((unsigned long)(skb->data + nlen) >= MAX_DMA_ADDRESS || nlen != skb->len) {
1029 memcpy(adapter->dma_buffer, skb->data, nlen);
1030 memset(adapter->dma_buffer+skb->len, 0, nlen-skb->len);
1031 target = isa_virt_to_bus(adapter->dma_buffer);
1034 target = isa_virt_to_bus(skb->data);
1036 adapter->current_dma.skb = skb;
1038 flags=claim_dma_lock();
1039 disable_dma(dev->dma);
1040 clear_dma_ff(dev->dma);
1041 set_dma_mode(dev->dma, 0x48); /* dma memory -> io */
1042 set_dma_addr(dev->dma, target);
1043 set_dma_count(dev->dma, nlen);
1044 outb_control(adapter->hcr_val | DMAE | TCEN, dev);
1045 enable_dma(dev->dma);
1046 release_dma_lock(flags);
1049 printk(KERN_DEBUG "%s: DMA transfer started\n", dev->name);
1055 * The upper layer thinks we timed out
1058 static void elp_timeout(struct net_device *dev)
1060 elp_device *adapter = dev->priv;
1063 stat = inb_status(dev->base_addr);
1064 printk(KERN_WARNING "%s: transmit timed out, lost %s?\n", dev->name, (stat & ACRF) ? "interrupt" : "command");
1066 printk(KERN_DEBUG "%s: status %#02x\n", dev->name, stat);
1067 dev->trans_start = jiffies;
1068 adapter->stats.tx_dropped++;
1069 netif_wake_queue(dev);
1072 /******************************************************
1074 * start the transmitter
1075 * return 0 if sent OK, else return 1
1077 ******************************************************/
1079 static int elp_start_xmit(struct sk_buff *skb, struct net_device *dev)
1081 unsigned long flags;
1082 elp_device *adapter = dev->priv;
1084 spin_lock_irqsave(&adapter->lock, flags);
1085 check_3c505_dma(dev);
1088 printk(KERN_DEBUG "%s: request to send packet of length %d\n", dev->name, (int) skb->len);
1090 netif_stop_queue(dev);
1093 * send the packet at skb->data for skb->len
1095 if (!send_packet(dev, skb)) {
1096 if (elp_debug >= 2) {
1097 printk(KERN_DEBUG "%s: failed to transmit packet\n", dev->name);
1099 spin_unlock_irqrestore(&adapter->lock, flags);
1103 printk(KERN_DEBUG "%s: packet of length %d sent\n", dev->name, (int) skb->len);
1106 * start the transmit timeout
1108 dev->trans_start = jiffies;
1111 spin_unlock_irqrestore(&adapter->lock, flags);
1112 netif_start_queue(dev);
1116 /******************************************************
1118 * return statistics on the board
1120 ******************************************************/
1122 static struct net_device_stats *elp_get_stats(struct net_device *dev)
1124 elp_device *adapter = (elp_device *) dev->priv;
1127 printk(KERN_DEBUG "%s: request for stats\n", dev->name);
1129 /* If the device is closed, just return the latest stats we have,
1130 - we cannot ask from the adapter without interrupts */
1131 if (!netif_running(dev))
1132 return &adapter->stats;
1134 /* send a get statistics command to the board */
1135 adapter->tx_pcb.command = CMD_NETWORK_STATISTICS;
1136 adapter->tx_pcb.length = 0;
1137 adapter->got[CMD_NETWORK_STATISTICS] = 0;
1138 if (!send_pcb(dev, &adapter->tx_pcb))
1139 printk(KERN_ERR "%s: couldn't send get statistics command\n", dev->name);
1141 unsigned long timeout = jiffies + TIMEOUT;
1142 while (adapter->got[CMD_NETWORK_STATISTICS] == 0 && time_before(jiffies, timeout));
1143 if (time_after_eq(jiffies, timeout)) {
1144 TIMEOUT_MSG(__LINE__);
1145 return &adapter->stats;
1149 /* statistics are now up to date */
1150 return &adapter->stats;
1154 static void netdev_get_drvinfo(struct net_device *dev,
1155 struct ethtool_drvinfo *info)
1157 strcpy(info->driver, DRV_NAME);
1158 strcpy(info->version, DRV_VERSION);
1159 sprintf(info->bus_info, "ISA 0x%lx", dev->base_addr);
1162 static u32 netdev_get_msglevel(struct net_device *dev)
1167 static void netdev_set_msglevel(struct net_device *dev, u32 level)
1172 static struct ethtool_ops netdev_ethtool_ops = {
1173 .get_drvinfo = netdev_get_drvinfo,
1174 .get_msglevel = netdev_get_msglevel,
1175 .set_msglevel = netdev_set_msglevel,
1178 /******************************************************
1182 ******************************************************/
1184 static int elp_close(struct net_device *dev)
1186 elp_device *adapter;
1188 adapter = dev->priv;
1191 printk(KERN_DEBUG "%s: request to close device\n", dev->name);
1193 netif_stop_queue(dev);
1195 /* Someone may request the device statistic information even when
1196 * the interface is closed. The following will update the statistics
1197 * structure in the driver, so we'll be able to give current statistics.
1199 (void) elp_get_stats(dev);
1202 * disable interrupts on the board
1204 outb_control(0, dev);
1209 free_irq(dev->irq, dev);
1212 free_pages((unsigned long) adapter->dma_buffer, get_order(DMA_BUFFER_SIZE));
1218 /************************************************************
1220 * Set multicast list
1221 * num_addrs==0: clear mc_list
1222 * num_addrs==-1: set promiscuous mode
1223 * num_addrs>0: set mc_list
1225 ************************************************************/
1227 static void elp_set_mc_list(struct net_device *dev)
1229 elp_device *adapter = (elp_device *) dev->priv;
1230 struct dev_mc_list *dmi = dev->mc_list;
1232 unsigned long flags;
1235 printk(KERN_DEBUG "%s: request to set multicast list\n", dev->name);
1237 spin_lock_irqsave(&adapter->lock, flags);
1239 if (!(dev->flags & (IFF_PROMISC | IFF_ALLMULTI))) {
1240 /* send a "load multicast list" command to the board, max 10 addrs/cmd */
1241 /* if num_addrs==0 the list will be cleared */
1242 adapter->tx_pcb.command = CMD_LOAD_MULTICAST_LIST;
1243 adapter->tx_pcb.length = 6 * dev->mc_count;
1244 for (i = 0; i < dev->mc_count; i++) {
1245 memcpy(adapter->tx_pcb.data.multicast[i], dmi->dmi_addr, 6);
1248 adapter->got[CMD_LOAD_MULTICAST_LIST] = 0;
1249 if (!send_pcb(dev, &adapter->tx_pcb))
1250 printk(KERN_ERR "%s: couldn't send set_multicast command\n", dev->name);
1252 unsigned long timeout = jiffies + TIMEOUT;
1253 while (adapter->got[CMD_LOAD_MULTICAST_LIST] == 0 && time_before(jiffies, timeout));
1254 if (time_after_eq(jiffies, timeout)) {
1255 TIMEOUT_MSG(__LINE__);
1259 adapter->tx_pcb.data.configure = NO_LOOPBACK | RECV_BROAD | RECV_MULTI;
1260 else /* num_addrs == 0 */
1261 adapter->tx_pcb.data.configure = NO_LOOPBACK | RECV_BROAD;
1263 adapter->tx_pcb.data.configure = NO_LOOPBACK | RECV_PROMISC;
1265 * configure adapter to receive messages (as specified above)
1266 * and wait for response
1269 printk(KERN_DEBUG "%s: sending 82586 configure command\n", dev->name);
1270 adapter->tx_pcb.command = CMD_CONFIGURE_82586;
1271 adapter->tx_pcb.length = 2;
1272 adapter->got[CMD_CONFIGURE_82586] = 0;
1273 if (!send_pcb(dev, &adapter->tx_pcb))
1275 spin_unlock_irqrestore(&adapter->lock, flags);
1276 printk(KERN_ERR "%s: couldn't send 82586 configure command\n", dev->name);
1279 unsigned long timeout = jiffies + TIMEOUT;
1280 spin_unlock_irqrestore(&adapter->lock, flags);
1281 while (adapter->got[CMD_CONFIGURE_82586] == 0 && time_before(jiffies, timeout));
1282 if (time_after_eq(jiffies, timeout))
1283 TIMEOUT_MSG(__LINE__);
1287 /************************************************************
1289 * A couple of tests to see if there's 3C505 or not
1290 * Called only by elp_autodetect
1291 ************************************************************/
1293 static int __init elp_sense(struct net_device *dev)
1295 int addr = dev->base_addr;
1296 const char *name = dev->name;
1299 if (!request_region(addr, ELP_IO_EXTENT, "3c505"))
1302 orig_HSR = inb_status(addr);
1305 printk(search_msg, name, addr);
1307 if (orig_HSR == 0xff) {
1309 printk(notfound_msg, 1);
1313 /* Wait for a while; the adapter may still be booting up */
1315 printk(stilllooking_msg);
1317 if (orig_HSR & DIR) {
1318 /* If HCR.DIR is up, we pull it down. HSR.DIR should follow. */
1319 outb(0, dev->base_addr + PORT_CONTROL);
1321 if (inb_status(addr) & DIR) {
1323 printk(notfound_msg, 2);
1327 /* If HCR.DIR is down, we pull it up. HSR.DIR should follow. */
1328 outb(DIR, dev->base_addr + PORT_CONTROL);
1330 if (!(inb_status(addr) & DIR)) {
1332 printk(notfound_msg, 3);
1337 * It certainly looks like a 3c505.
1344 release_region(addr, ELP_IO_EXTENT);
1348 /*************************************************************
1350 * Search through addr_list[] and try to find a 3C505
1351 * Called only by eplus_probe
1352 *************************************************************/
1354 static int __init elp_autodetect(struct net_device *dev)
1358 /* if base address set, then only check that address
1359 otherwise, run through the table */
1360 if (dev->base_addr != 0) { /* dev->base_addr == 0 ==> plain autodetect */
1361 if (elp_sense(dev) == 0)
1362 return dev->base_addr;
1364 while ((dev->base_addr = addr_list[idx++])) {
1365 if (elp_sense(dev) == 0)
1366 return dev->base_addr;
1369 /* could not find an adapter */
1371 printk(couldnot_msg, dev->name);
1373 return 0; /* Because of this, the layer above will return -ENODEV */
1377 /******************************************************
1379 * probe for an Etherlink Plus board at the specified address
1381 ******************************************************/
1383 /* There are three situations we need to be able to detect here:
1385 * a) the card is idle
1386 * b) the card is still booting up
1387 * c) the card is stuck in a strange state (some DOS drivers do this)
1389 * In case (a), all is well. In case (b), we wait 10 seconds to see if the
1390 * card finishes booting, and carry on if so. In case (c), we do a hard reset,
1391 * loop round, and hope for the best.
1393 * This is all very unpleasant, but hopefully avoids the problems with the old
1394 * probe code (which had a 15-second delay if the card was idle, and didn't
1395 * work at all if it was in a weird state).
1398 static int __init elplus_setup(struct net_device *dev)
1400 elp_device *adapter = dev->priv;
1401 int i, tries, tries1, okay;
1402 unsigned long timeout;
1403 unsigned long cookie = 0;
1406 SET_MODULE_OWNER(dev);
1409 * setup adapter structure
1412 dev->base_addr = elp_autodetect(dev);
1413 if (!dev->base_addr)
1416 adapter->send_pcb_semaphore = 0;
1418 for (tries1 = 0; tries1 < 3; tries1++) {
1419 outb_control((adapter->hcr_val | CMDE) & ~DIR, dev);
1420 /* First try to write just one byte, to see if the card is
1421 * responding at all normally.
1423 timeout = jiffies + 5*HZ/100;
1425 while (time_before(jiffies, timeout) && !(inb_status(dev->base_addr) & HCRE));
1426 if ((inb_status(dev->base_addr) & HCRE)) {
1427 outb_command(0, dev->base_addr); /* send a spurious byte */
1428 timeout = jiffies + 5*HZ/100;
1429 while (time_before(jiffies, timeout) && !(inb_status(dev->base_addr) & HCRE));
1430 if (inb_status(dev->base_addr) & HCRE)
1434 /* Nope, it's ignoring the command register. This means that
1435 * either it's still booting up, or it's died.
1437 printk(KERN_ERR "%s: command register wouldn't drain, ", dev->name);
1438 if ((inb_status(dev->base_addr) & 7) == 3) {
1439 /* If the adapter status is 3, it *could* still be booting.
1440 * Give it the benefit of the doubt for 10 seconds.
1442 printk("assuming 3c505 still starting\n");
1443 timeout = jiffies + 10*HZ;
1444 while (time_before(jiffies, timeout) && (inb_status(dev->base_addr) & 7));
1445 if (inb_status(dev->base_addr) & 7) {
1446 printk(KERN_ERR "%s: 3c505 failed to start\n", dev->name);
1448 okay = 1; /* It started */
1451 /* Otherwise, it must just be in a strange
1452 * state. We probably need to kick it.
1454 printk("3c505 is sulking\n");
1457 for (tries = 0; tries < 5 && okay; tries++) {
1460 * Try to set the Ethernet address, to make sure that the board
1463 adapter->tx_pcb.command = CMD_STATION_ADDRESS;
1464 adapter->tx_pcb.length = 0;
1465 cookie = probe_irq_on();
1466 if (!send_pcb(dev, &adapter->tx_pcb)) {
1467 printk(KERN_ERR "%s: could not send first PCB\n", dev->name);
1468 probe_irq_off(cookie);
1471 if (!receive_pcb(dev, &adapter->rx_pcb)) {
1472 printk(KERN_ERR "%s: could not read first PCB\n", dev->name);
1473 probe_irq_off(cookie);
1476 if ((adapter->rx_pcb.command != CMD_ADDRESS_RESPONSE) ||
1477 (adapter->rx_pcb.length != 6)) {
1478 printk(KERN_ERR "%s: first PCB wrong (%d, %d)\n", dev->name, adapter->rx_pcb.command, adapter->rx_pcb.length);
1479 probe_irq_off(cookie);
1484 /* It's broken. Do a hard reset to re-initialise the board,
1487 printk(KERN_INFO "%s: resetting adapter\n", dev->name);
1488 outb_control(adapter->hcr_val | FLSH | ATTN, dev);
1489 outb_control(adapter->hcr_val & ~(FLSH | ATTN), dev);
1491 printk(KERN_ERR "%s: failed to initialise 3c505\n", dev->name);
1495 if (dev->irq) { /* Is there a preset IRQ? */
1496 int rpt = probe_irq_off(cookie);
1497 if (dev->irq != rpt) {
1498 printk(KERN_WARNING "%s: warning, irq %d configured but %d detected\n", dev->name, dev->irq, rpt);
1500 /* if dev->irq == probe_irq_off(cookie), all is well */
1501 } else /* No preset IRQ; just use what we can detect */
1502 dev->irq = probe_irq_off(cookie);
1503 switch (dev->irq) { /* Legal, sane? */
1505 printk(KERN_ERR "%s: IRQ probe failed: check 3c505 jumpers.\n",
1512 printk(KERN_ERR "%s: Impossible IRQ %d reported by probe_irq_off().\n",
1513 dev->name, dev->irq);
1517 * Now we have the IRQ number so we can disable the interrupts from
1518 * the board until the board is opened.
1520 outb_control(adapter->hcr_val & ~CMDE, dev);
1523 * copy Ethernet address into structure
1525 for (i = 0; i < 6; i++)
1526 dev->dev_addr[i] = adapter->rx_pcb.data.eth_addr[i];
1528 /* find a DMA channel */
1530 if (dev->mem_start) {
1531 dev->dma = dev->mem_start & 7;
1534 printk(KERN_WARNING "%s: warning, DMA channel not specified, using default\n", dev->name);
1540 * print remainder of startup message
1542 printk(KERN_INFO "%s: 3c505 at %#lx, irq %d, dma %d, ",
1543 dev->name, dev->base_addr, dev->irq, dev->dma);
1544 printk("addr %02x:%02x:%02x:%02x:%02x:%02x, ",
1545 dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
1546 dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);
1549 * read more information from the adapter
1552 adapter->tx_pcb.command = CMD_ADAPTER_INFO;
1553 adapter->tx_pcb.length = 0;
1554 if (!send_pcb(dev, &adapter->tx_pcb) ||
1555 !receive_pcb(dev, &adapter->rx_pcb) ||
1556 (adapter->rx_pcb.command != CMD_ADAPTER_INFO_RESPONSE) ||
1557 (adapter->rx_pcb.length != 10)) {
1558 printk("not responding to second PCB\n");
1560 printk("rev %d.%d, %dk\n", adapter->rx_pcb.data.info.major_vers, adapter->rx_pcb.data.info.minor_vers, adapter->rx_pcb.data.info.RAM_sz);
1563 * reconfigure the adapter memory to better suit our purposes
1565 adapter->tx_pcb.command = CMD_CONFIGURE_ADAPTER_MEMORY;
1566 adapter->tx_pcb.length = 12;
1567 adapter->tx_pcb.data.memconf.cmd_q = 8;
1568 adapter->tx_pcb.data.memconf.rcv_q = 8;
1569 adapter->tx_pcb.data.memconf.mcast = 10;
1570 adapter->tx_pcb.data.memconf.frame = 10;
1571 adapter->tx_pcb.data.memconf.rcv_b = 10;
1572 adapter->tx_pcb.data.memconf.progs = 0;
1573 if (!send_pcb(dev, &adapter->tx_pcb) ||
1574 !receive_pcb(dev, &adapter->rx_pcb) ||
1575 (adapter->rx_pcb.command != CMD_CONFIGURE_ADAPTER_RESPONSE) ||
1576 (adapter->rx_pcb.length != 2)) {
1577 printk(KERN_ERR "%s: could not configure adapter memory\n", dev->name);
1579 if (adapter->rx_pcb.data.configure) {
1580 printk(KERN_ERR "%s: adapter configuration failed\n", dev->name);
1583 dev->open = elp_open; /* local */
1584 dev->stop = elp_close; /* local */
1585 dev->get_stats = elp_get_stats; /* local */
1586 dev->hard_start_xmit = elp_start_xmit; /* local */
1587 dev->tx_timeout = elp_timeout; /* local */
1588 dev->watchdog_timeo = 10*HZ;
1589 dev->set_multicast_list = elp_set_mc_list; /* local */
1590 dev->ethtool_ops = &netdev_ethtool_ops; /* local */
1592 memset(&(adapter->stats), 0, sizeof(struct net_device_stats));
1593 dev->mem_start = dev->mem_end = 0;
1595 err = register_netdev(dev);
1601 release_region(dev->base_addr, ELP_IO_EXTENT);
1606 struct net_device * __init elplus_probe(int unit)
1608 struct net_device *dev = alloc_etherdev(sizeof(elp_device));
1611 return ERR_PTR(-ENOMEM);
1613 sprintf(dev->name, "eth%d", unit);
1614 netdev_boot_setup_check(dev);
1616 err = elplus_setup(dev);
1619 return ERR_PTR(err);
1625 static struct net_device *dev_3c505[ELP_MAX_CARDS];
1626 static int io[ELP_MAX_CARDS];
1627 static int irq[ELP_MAX_CARDS];
1628 static int dma[ELP_MAX_CARDS];
1629 module_param_array(io, int, NULL, 0);
1630 module_param_array(irq, int, NULL, 0);
1631 module_param_array(dma, int, NULL, 0);
1632 MODULE_PARM_DESC(io, "EtherLink Plus I/O base address(es)");
1633 MODULE_PARM_DESC(irq, "EtherLink Plus IRQ number(s) (assigned)");
1634 MODULE_PARM_DESC(dma, "EtherLink Plus DMA channel(s)");
1636 int __init init_module(void)
1638 int this_dev, found = 0;
1640 for (this_dev = 0; this_dev < ELP_MAX_CARDS; this_dev++) {
1641 struct net_device *dev = alloc_etherdev(sizeof(elp_device));
1645 dev->irq = irq[this_dev];
1646 dev->base_addr = io[this_dev];
1647 if (dma[this_dev]) {
1648 dev->dma = dma[this_dev];
1651 printk(KERN_WARNING "3c505.c: warning, using default DMA channel,\n");
1653 if (io[this_dev] == 0) {
1658 printk(KERN_NOTICE "3c505.c: module autoprobe not recommended, give io=xx.\n");
1660 if (elplus_setup(dev) != 0) {
1661 printk(KERN_WARNING "3c505.c: Failed to register card at 0x%x.\n", io[this_dev]);
1665 dev_3c505[this_dev] = dev;
1673 void cleanup_module(void)
1677 for (this_dev = 0; this_dev < ELP_MAX_CARDS; this_dev++) {
1678 struct net_device *dev = dev_3c505[this_dev];
1680 unregister_netdev(dev);
1681 release_region(dev->base_addr, ELP_IO_EXTENT);
1688 MODULE_LICENSE("GPL");