[MMC] Pass -DDEBUG on compiler command line if MMC_DEBUG selected
[pandora-kernel.git] / drivers / mmc / mmci.c
1 /*
2  *  linux/drivers/mmc/mmci.c - ARM PrimeCell MMCI PL180/1 driver
3  *
4  *  Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License version 2 as
8  * published by the Free Software Foundation.
9  */
10 #include <linux/config.h>
11 #include <linux/module.h>
12 #include <linux/moduleparam.h>
13 #include <linux/init.h>
14 #include <linux/ioport.h>
15 #include <linux/device.h>
16 #include <linux/interrupt.h>
17 #include <linux/delay.h>
18 #include <linux/err.h>
19 #include <linux/highmem.h>
20 #include <linux/mmc/host.h>
21 #include <linux/mmc/protocol.h>
22 #include <linux/amba/bus.h>
23 #include <linux/clk.h>
24
25 #include <asm/cacheflush.h>
26 #include <asm/div64.h>
27 #include <asm/io.h>
28 #include <asm/scatterlist.h>
29 #include <asm/sizes.h>
30 #include <asm/mach/mmc.h>
31
32 #include "mmci.h"
33
34 #define DRIVER_NAME "mmci-pl18x"
35
36 #define DBG(host,fmt,args...)   \
37         pr_debug("%s: %s: " fmt, mmc_hostname(host->mmc), __func__ , args)
38
39 static unsigned int fmax = 515633;
40
41 static void
42 mmci_request_end(struct mmci_host *host, struct mmc_request *mrq)
43 {
44         writel(0, host->base + MMCICOMMAND);
45
46         host->mrq = NULL;
47         host->cmd = NULL;
48
49         if (mrq->data)
50                 mrq->data->bytes_xfered = host->data_xfered;
51
52         /*
53          * Need to drop the host lock here; mmc_request_done may call
54          * back into the driver...
55          */
56         spin_unlock(&host->lock);
57         mmc_request_done(host->mmc, mrq);
58         spin_lock(&host->lock);
59 }
60
61 static void mmci_stop_data(struct mmci_host *host)
62 {
63         writel(0, host->base + MMCIDATACTRL);
64         writel(0, host->base + MMCIMASK1);
65         host->data = NULL;
66 }
67
68 static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
69 {
70         unsigned int datactrl, timeout, irqmask;
71         unsigned long long clks;
72         void __iomem *base;
73
74         DBG(host, "blksz %04x blks %04x flags %08x\n",
75             1 << data->blksz_bits, data->blocks, data->flags);
76
77         host->data = data;
78         host->size = data->blocks << data->blksz_bits;
79         host->data_xfered = 0;
80
81         mmci_init_sg(host, data);
82
83         clks = (unsigned long long)data->timeout_ns * host->cclk;
84         do_div(clks, 1000000000UL);
85
86         timeout = data->timeout_clks + (unsigned int)clks;
87
88         base = host->base;
89         writel(timeout, base + MMCIDATATIMER);
90         writel(host->size, base + MMCIDATALENGTH);
91
92         datactrl = MCI_DPSM_ENABLE | data->blksz_bits << 4;
93         if (data->flags & MMC_DATA_READ) {
94                 datactrl |= MCI_DPSM_DIRECTION;
95                 irqmask = MCI_RXFIFOHALFFULLMASK;
96
97                 /*
98                  * If we have less than a FIFOSIZE of bytes to transfer,
99                  * trigger a PIO interrupt as soon as any data is available.
100                  */
101                 if (host->size < MCI_FIFOSIZE)
102                         irqmask |= MCI_RXDATAAVLBLMASK;
103         } else {
104                 /*
105                  * We don't actually need to include "FIFO empty" here
106                  * since its implicit in "FIFO half empty".
107                  */
108                 irqmask = MCI_TXFIFOHALFEMPTYMASK;
109         }
110
111         writel(datactrl, base + MMCIDATACTRL);
112         writel(readl(base + MMCIMASK0) & ~MCI_DATAENDMASK, base + MMCIMASK0);
113         writel(irqmask, base + MMCIMASK1);
114 }
115
116 static void
117 mmci_start_command(struct mmci_host *host, struct mmc_command *cmd, u32 c)
118 {
119         void __iomem *base = host->base;
120
121         DBG(host, "op %02x arg %08x flags %08x\n",
122             cmd->opcode, cmd->arg, cmd->flags);
123
124         if (readl(base + MMCICOMMAND) & MCI_CPSM_ENABLE) {
125                 writel(0, base + MMCICOMMAND);
126                 udelay(1);
127         }
128
129         c |= cmd->opcode | MCI_CPSM_ENABLE;
130         if (cmd->flags & MMC_RSP_PRESENT) {
131                 if (cmd->flags & MMC_RSP_136)
132                         c |= MCI_CPSM_LONGRSP;
133                 c |= MCI_CPSM_RESPONSE;
134         }
135         if (/*interrupt*/0)
136                 c |= MCI_CPSM_INTERRUPT;
137
138         host->cmd = cmd;
139
140         writel(cmd->arg, base + MMCIARGUMENT);
141         writel(c, base + MMCICOMMAND);
142 }
143
144 static void
145 mmci_data_irq(struct mmci_host *host, struct mmc_data *data,
146               unsigned int status)
147 {
148         if (status & MCI_DATABLOCKEND) {
149                 host->data_xfered += 1 << data->blksz_bits;
150         }
151         if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_TXUNDERRUN|MCI_RXOVERRUN)) {
152                 if (status & MCI_DATACRCFAIL)
153                         data->error = MMC_ERR_BADCRC;
154                 else if (status & MCI_DATATIMEOUT)
155                         data->error = MMC_ERR_TIMEOUT;
156                 else if (status & (MCI_TXUNDERRUN|MCI_RXOVERRUN))
157                         data->error = MMC_ERR_FIFO;
158                 status |= MCI_DATAEND;
159
160                 /*
161                  * We hit an error condition.  Ensure that any data
162                  * partially written to a page is properly coherent.
163                  */
164                 if (host->sg_len && data->flags & MMC_DATA_READ)
165                         flush_dcache_page(host->sg_ptr->page);
166         }
167         if (status & MCI_DATAEND) {
168                 mmci_stop_data(host);
169
170                 if (!data->stop) {
171                         mmci_request_end(host, data->mrq);
172                 } else {
173                         mmci_start_command(host, data->stop, 0);
174                 }
175         }
176 }
177
178 static void
179 mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd,
180              unsigned int status)
181 {
182         void __iomem *base = host->base;
183
184         host->cmd = NULL;
185
186         cmd->resp[0] = readl(base + MMCIRESPONSE0);
187         cmd->resp[1] = readl(base + MMCIRESPONSE1);
188         cmd->resp[2] = readl(base + MMCIRESPONSE2);
189         cmd->resp[3] = readl(base + MMCIRESPONSE3);
190
191         if (status & MCI_CMDTIMEOUT) {
192                 cmd->error = MMC_ERR_TIMEOUT;
193         } else if (status & MCI_CMDCRCFAIL && cmd->flags & MMC_RSP_CRC) {
194                 cmd->error = MMC_ERR_BADCRC;
195         }
196
197         if (!cmd->data || cmd->error != MMC_ERR_NONE) {
198                 mmci_request_end(host, cmd->mrq);
199         } else if (!(cmd->data->flags & MMC_DATA_READ)) {
200                 mmci_start_data(host, cmd->data);
201         }
202 }
203
204 static int mmci_pio_read(struct mmci_host *host, char *buffer, unsigned int remain)
205 {
206         void __iomem *base = host->base;
207         char *ptr = buffer;
208         u32 status;
209
210         do {
211                 int count = host->size - (readl(base + MMCIFIFOCNT) << 2);
212
213                 if (count > remain)
214                         count = remain;
215
216                 if (count <= 0)
217                         break;
218
219                 readsl(base + MMCIFIFO, ptr, count >> 2);
220
221                 ptr += count;
222                 remain -= count;
223
224                 if (remain == 0)
225                         break;
226
227                 status = readl(base + MMCISTATUS);
228         } while (status & MCI_RXDATAAVLBL);
229
230         return ptr - buffer;
231 }
232
233 static int mmci_pio_write(struct mmci_host *host, char *buffer, unsigned int remain, u32 status)
234 {
235         void __iomem *base = host->base;
236         char *ptr = buffer;
237
238         do {
239                 unsigned int count, maxcnt;
240
241                 maxcnt = status & MCI_TXFIFOEMPTY ? MCI_FIFOSIZE : MCI_FIFOHALFSIZE;
242                 count = min(remain, maxcnt);
243
244                 writesl(base + MMCIFIFO, ptr, count >> 2);
245
246                 ptr += count;
247                 remain -= count;
248
249                 if (remain == 0)
250                         break;
251
252                 status = readl(base + MMCISTATUS);
253         } while (status & MCI_TXFIFOHALFEMPTY);
254
255         return ptr - buffer;
256 }
257
258 /*
259  * PIO data transfer IRQ handler.
260  */
261 static irqreturn_t mmci_pio_irq(int irq, void *dev_id, struct pt_regs *regs)
262 {
263         struct mmci_host *host = dev_id;
264         void __iomem *base = host->base;
265         u32 status;
266
267         status = readl(base + MMCISTATUS);
268
269         DBG(host, "irq1 %08x\n", status);
270
271         do {
272                 unsigned long flags;
273                 unsigned int remain, len;
274                 char *buffer;
275
276                 /*
277                  * For write, we only need to test the half-empty flag
278                  * here - if the FIFO is completely empty, then by
279                  * definition it is more than half empty.
280                  *
281                  * For read, check for data available.
282                  */
283                 if (!(status & (MCI_TXFIFOHALFEMPTY|MCI_RXDATAAVLBL)))
284                         break;
285
286                 /*
287                  * Map the current scatter buffer.
288                  */
289                 buffer = mmci_kmap_atomic(host, &flags) + host->sg_off;
290                 remain = host->sg_ptr->length - host->sg_off;
291
292                 len = 0;
293                 if (status & MCI_RXACTIVE)
294                         len = mmci_pio_read(host, buffer, remain);
295                 if (status & MCI_TXACTIVE)
296                         len = mmci_pio_write(host, buffer, remain, status);
297
298                 /*
299                  * Unmap the buffer.
300                  */
301                 mmci_kunmap_atomic(host, buffer, &flags);
302
303                 host->sg_off += len;
304                 host->size -= len;
305                 remain -= len;
306
307                 if (remain)
308                         break;
309
310                 /*
311                  * If we were reading, and we have completed this
312                  * page, ensure that the data cache is coherent.
313                  */
314                 if (status & MCI_RXACTIVE)
315                         flush_dcache_page(host->sg_ptr->page);
316
317                 if (!mmci_next_sg(host))
318                         break;
319
320                 status = readl(base + MMCISTATUS);
321         } while (1);
322
323         /*
324          * If we're nearing the end of the read, switch to
325          * "any data available" mode.
326          */
327         if (status & MCI_RXACTIVE && host->size < MCI_FIFOSIZE)
328                 writel(MCI_RXDATAAVLBLMASK, base + MMCIMASK1);
329
330         /*
331          * If we run out of data, disable the data IRQs; this
332          * prevents a race where the FIFO becomes empty before
333          * the chip itself has disabled the data path, and
334          * stops us racing with our data end IRQ.
335          */
336         if (host->size == 0) {
337                 writel(0, base + MMCIMASK1);
338                 writel(readl(base + MMCIMASK0) | MCI_DATAENDMASK, base + MMCIMASK0);
339         }
340
341         return IRQ_HANDLED;
342 }
343
344 /*
345  * Handle completion of command and data transfers.
346  */
347 static irqreturn_t mmci_irq(int irq, void *dev_id, struct pt_regs *regs)
348 {
349         struct mmci_host *host = dev_id;
350         u32 status;
351         int ret = 0;
352
353         spin_lock(&host->lock);
354
355         do {
356                 struct mmc_command *cmd;
357                 struct mmc_data *data;
358
359                 status = readl(host->base + MMCISTATUS);
360                 status &= readl(host->base + MMCIMASK0);
361                 writel(status, host->base + MMCICLEAR);
362
363                 DBG(host, "irq0 %08x\n", status);
364
365                 data = host->data;
366                 if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_TXUNDERRUN|
367                               MCI_RXOVERRUN|MCI_DATAEND|MCI_DATABLOCKEND) && data)
368                         mmci_data_irq(host, data, status);
369
370                 cmd = host->cmd;
371                 if (status & (MCI_CMDCRCFAIL|MCI_CMDTIMEOUT|MCI_CMDSENT|MCI_CMDRESPEND) && cmd)
372                         mmci_cmd_irq(host, cmd, status);
373
374                 ret = 1;
375         } while (status);
376
377         spin_unlock(&host->lock);
378
379         return IRQ_RETVAL(ret);
380 }
381
382 static void mmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
383 {
384         struct mmci_host *host = mmc_priv(mmc);
385
386         WARN_ON(host->mrq != NULL);
387
388         spin_lock_irq(&host->lock);
389
390         host->mrq = mrq;
391
392         if (mrq->data && mrq->data->flags & MMC_DATA_READ)
393                 mmci_start_data(host, mrq->data);
394
395         mmci_start_command(host, mrq->cmd, 0);
396
397         spin_unlock_irq(&host->lock);
398 }
399
400 static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
401 {
402         struct mmci_host *host = mmc_priv(mmc);
403         u32 clk = 0, pwr = 0;
404
405         DBG(host, "clock %uHz busmode %u powermode %u Vdd %u\n",
406             ios->clock, ios->bus_mode, ios->power_mode, ios->vdd);
407
408         if (ios->clock) {
409                 if (ios->clock >= host->mclk) {
410                         clk = MCI_CLK_BYPASS;
411                         host->cclk = host->mclk;
412                 } else {
413                         clk = host->mclk / (2 * ios->clock) - 1;
414                         if (clk > 256)
415                                 clk = 255;
416                         host->cclk = host->mclk / (2 * (clk + 1));
417                 }
418                 clk |= MCI_CLK_ENABLE;
419         }
420
421         if (host->plat->translate_vdd)
422                 pwr |= host->plat->translate_vdd(mmc_dev(mmc), ios->vdd);
423
424         switch (ios->power_mode) {
425         case MMC_POWER_OFF:
426                 break;
427         case MMC_POWER_UP:
428                 pwr |= MCI_PWR_UP;
429                 break;
430         case MMC_POWER_ON:
431                 pwr |= MCI_PWR_ON;
432                 break;
433         }
434
435         if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN)
436                 pwr |= MCI_ROD;
437
438         writel(clk, host->base + MMCICLOCK);
439
440         if (host->pwr != pwr) {
441                 host->pwr = pwr;
442                 writel(pwr, host->base + MMCIPOWER);
443         }
444 }
445
446 static struct mmc_host_ops mmci_ops = {
447         .request        = mmci_request,
448         .set_ios        = mmci_set_ios,
449 };
450
451 static void mmci_check_status(unsigned long data)
452 {
453         struct mmci_host *host = (struct mmci_host *)data;
454         unsigned int status;
455
456         status = host->plat->status(mmc_dev(host->mmc));
457         if (status ^ host->oldstat)
458                 mmc_detect_change(host->mmc, 0);
459
460         host->oldstat = status;
461         mod_timer(&host->timer, jiffies + HZ);
462 }
463
464 static int mmci_probe(struct amba_device *dev, void *id)
465 {
466         struct mmc_platform_data *plat = dev->dev.platform_data;
467         struct mmci_host *host;
468         struct mmc_host *mmc;
469         int ret;
470
471         /* must have platform data */
472         if (!plat) {
473                 ret = -EINVAL;
474                 goto out;
475         }
476
477         ret = amba_request_regions(dev, DRIVER_NAME);
478         if (ret)
479                 goto out;
480
481         mmc = mmc_alloc_host(sizeof(struct mmci_host), &dev->dev);
482         if (!mmc) {
483                 ret = -ENOMEM;
484                 goto rel_regions;
485         }
486
487         host = mmc_priv(mmc);
488         host->clk = clk_get(&dev->dev, "MCLK");
489         if (IS_ERR(host->clk)) {
490                 ret = PTR_ERR(host->clk);
491                 host->clk = NULL;
492                 goto host_free;
493         }
494
495         ret = clk_enable(host->clk);
496         if (ret)
497                 goto clk_free;
498
499         host->plat = plat;
500         host->mclk = clk_get_rate(host->clk);
501         host->mmc = mmc;
502         host->base = ioremap(dev->res.start, SZ_4K);
503         if (!host->base) {
504                 ret = -ENOMEM;
505                 goto clk_disable;
506         }
507
508         mmc->ops = &mmci_ops;
509         mmc->f_min = (host->mclk + 511) / 512;
510         mmc->f_max = min(host->mclk, fmax);
511         mmc->ocr_avail = plat->ocr_mask;
512
513         /*
514          * We can do SGIO
515          */
516         mmc->max_hw_segs = 16;
517         mmc->max_phys_segs = NR_SG;
518
519         /*
520          * Since we only have a 16-bit data length register, we must
521          * ensure that we don't exceed 2^16-1 bytes in a single request.
522          * Choose 64 (512-byte) sectors as the limit.
523          */
524         mmc->max_sectors = 64;
525
526         /*
527          * Set the maximum segment size.  Since we aren't doing DMA
528          * (yet) we are only limited by the data length register.
529          */
530         mmc->max_seg_size = mmc->max_sectors << 9;
531
532         spin_lock_init(&host->lock);
533
534         writel(0, host->base + MMCIMASK0);
535         writel(0, host->base + MMCIMASK1);
536         writel(0xfff, host->base + MMCICLEAR);
537
538         ret = request_irq(dev->irq[0], mmci_irq, SA_SHIRQ, DRIVER_NAME " (cmd)", host);
539         if (ret)
540                 goto unmap;
541
542         ret = request_irq(dev->irq[1], mmci_pio_irq, SA_SHIRQ, DRIVER_NAME " (pio)", host);
543         if (ret)
544                 goto irq0_free;
545
546         writel(MCI_IRQENABLE, host->base + MMCIMASK0);
547
548         amba_set_drvdata(dev, mmc);
549
550         mmc_add_host(mmc);
551
552         printk(KERN_INFO "%s: MMCI rev %x cfg %02x at 0x%08lx irq %d,%d\n",
553                 mmc_hostname(mmc), amba_rev(dev), amba_config(dev),
554                 dev->res.start, dev->irq[0], dev->irq[1]);
555
556         init_timer(&host->timer);
557         host->timer.data = (unsigned long)host;
558         host->timer.function = mmci_check_status;
559         host->timer.expires = jiffies + HZ;
560         add_timer(&host->timer);
561
562         return 0;
563
564  irq0_free:
565         free_irq(dev->irq[0], host);
566  unmap:
567         iounmap(host->base);
568  clk_disable:
569         clk_disable(host->clk);
570  clk_free:
571         clk_put(host->clk);
572  host_free:
573         mmc_free_host(mmc);
574  rel_regions:
575         amba_release_regions(dev);
576  out:
577         return ret;
578 }
579
580 static int mmci_remove(struct amba_device *dev)
581 {
582         struct mmc_host *mmc = amba_get_drvdata(dev);
583
584         amba_set_drvdata(dev, NULL);
585
586         if (mmc) {
587                 struct mmci_host *host = mmc_priv(mmc);
588
589                 del_timer_sync(&host->timer);
590
591                 mmc_remove_host(mmc);
592
593                 writel(0, host->base + MMCIMASK0);
594                 writel(0, host->base + MMCIMASK1);
595
596                 writel(0, host->base + MMCICOMMAND);
597                 writel(0, host->base + MMCIDATACTRL);
598
599                 free_irq(dev->irq[0], host);
600                 free_irq(dev->irq[1], host);
601
602                 iounmap(host->base);
603                 clk_disable(host->clk);
604                 clk_put(host->clk);
605
606                 mmc_free_host(mmc);
607
608                 amba_release_regions(dev);
609         }
610
611         return 0;
612 }
613
614 #ifdef CONFIG_PM
615 static int mmci_suspend(struct amba_device *dev, pm_message_t state)
616 {
617         struct mmc_host *mmc = amba_get_drvdata(dev);
618         int ret = 0;
619
620         if (mmc) {
621                 struct mmci_host *host = mmc_priv(mmc);
622
623                 ret = mmc_suspend_host(mmc, state);
624                 if (ret == 0)
625                         writel(0, host->base + MMCIMASK0);
626         }
627
628         return ret;
629 }
630
631 static int mmci_resume(struct amba_device *dev)
632 {
633         struct mmc_host *mmc = amba_get_drvdata(dev);
634         int ret = 0;
635
636         if (mmc) {
637                 struct mmci_host *host = mmc_priv(mmc);
638
639                 writel(MCI_IRQENABLE, host->base + MMCIMASK0);
640
641                 ret = mmc_resume_host(mmc);
642         }
643
644         return ret;
645 }
646 #else
647 #define mmci_suspend    NULL
648 #define mmci_resume     NULL
649 #endif
650
651 static struct amba_id mmci_ids[] = {
652         {
653                 .id     = 0x00041180,
654                 .mask   = 0x000fffff,
655         },
656         {
657                 .id     = 0x00041181,
658                 .mask   = 0x000fffff,
659         },
660         { 0, 0 },
661 };
662
663 static struct amba_driver mmci_driver = {
664         .drv            = {
665                 .name   = DRIVER_NAME,
666         },
667         .probe          = mmci_probe,
668         .remove         = mmci_remove,
669         .suspend        = mmci_suspend,
670         .resume         = mmci_resume,
671         .id_table       = mmci_ids,
672 };
673
674 static int __init mmci_init(void)
675 {
676         return amba_driver_register(&mmci_driver);
677 }
678
679 static void __exit mmci_exit(void)
680 {
681         amba_driver_unregister(&mmci_driver);
682 }
683
684 module_init(mmci_init);
685 module_exit(mmci_exit);
686 module_param(fmax, uint, 0444);
687
688 MODULE_DESCRIPTION("ARM PrimeCell PL180/181 Multimedia Card Interface driver");
689 MODULE_LICENSE("GPL");