Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
[pandora-kernel.git] / drivers / mfd / omap-usb-host.c
1 /**
2  * omap-usb-host.c - The USBHS core driver for OMAP EHCI & OHCI
3  *
4  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com
5  * Author: Keshava Munegowda <keshava_mgowda@ti.com>
6  *
7  * This program is free software: you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License version 2  of
9  * the License as published by the Free Software Foundation.
10  *
11  * This program is distributed in the hope that it will be useful,
12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14  * GNU General Public License for more details.
15  *
16  * You should have received a copy of the GNU General Public License
17  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
18  */
19 #include <linux/kernel.h>
20 #include <linux/types.h>
21 #include <linux/slab.h>
22 #include <linux/delay.h>
23 #include <linux/platform_device.h>
24 #include <linux/clk.h>
25 #include <linux/dma-mapping.h>
26 #include <linux/spinlock.h>
27 #include <linux/gpio.h>
28 #include <plat/usb.h>
29
30 #define USBHS_DRIVER_NAME       "usbhs-omap"
31 #define OMAP_EHCI_DEVICE        "ehci-omap"
32 #define OMAP_OHCI_DEVICE        "ohci-omap3"
33
34 /* OMAP USBHOST Register addresses  */
35
36 /* TLL Register Set */
37 #define OMAP_USBTLL_REVISION                            (0x00)
38 #define OMAP_USBTLL_SYSCONFIG                           (0x10)
39 #define OMAP_USBTLL_SYSCONFIG_CACTIVITY                 (1 << 8)
40 #define OMAP_USBTLL_SYSCONFIG_SIDLEMODE                 (1 << 3)
41 #define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP                 (1 << 2)
42 #define OMAP_USBTLL_SYSCONFIG_SOFTRESET                 (1 << 1)
43 #define OMAP_USBTLL_SYSCONFIG_AUTOIDLE                  (1 << 0)
44
45 #define OMAP_USBTLL_SYSSTATUS                           (0x14)
46 #define OMAP_USBTLL_SYSSTATUS_RESETDONE                 (1 << 0)
47
48 #define OMAP_USBTLL_IRQSTATUS                           (0x18)
49 #define OMAP_USBTLL_IRQENABLE                           (0x1C)
50
51 #define OMAP_TLL_SHARED_CONF                            (0x30)
52 #define OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN             (1 << 6)
53 #define OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN            (1 << 5)
54 #define OMAP_TLL_SHARED_CONF_USB_DIVRATION              (1 << 2)
55 #define OMAP_TLL_SHARED_CONF_FCLK_REQ                   (1 << 1)
56 #define OMAP_TLL_SHARED_CONF_FCLK_IS_ON                 (1 << 0)
57
58 #define OMAP_TLL_CHANNEL_CONF(num)                      (0x040 + 0x004 * num)
59 #define OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT            24
60 #define OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF            (1 << 11)
61 #define OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE         (1 << 10)
62 #define OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE              (1 << 9)
63 #define OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE               (1 << 8)
64 #define OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS             (1 << 1)
65 #define OMAP_TLL_CHANNEL_CONF_CHANEN                    (1 << 0)
66
67 #define OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0              0x0
68 #define OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM                0x1
69 #define OMAP_TLL_FSLSMODE_3PIN_PHY                      0x2
70 #define OMAP_TLL_FSLSMODE_4PIN_PHY                      0x3
71 #define OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0              0x4
72 #define OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM                0x5
73 #define OMAP_TLL_FSLSMODE_3PIN_TLL                      0x6
74 #define OMAP_TLL_FSLSMODE_4PIN_TLL                      0x7
75 #define OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0              0xA
76 #define OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM                0xB
77
78 #define OMAP_TLL_ULPI_FUNCTION_CTRL(num)                (0x804 + 0x100 * num)
79 #define OMAP_TLL_ULPI_INTERFACE_CTRL(num)               (0x807 + 0x100 * num)
80 #define OMAP_TLL_ULPI_OTG_CTRL(num)                     (0x80A + 0x100 * num)
81 #define OMAP_TLL_ULPI_INT_EN_RISE(num)                  (0x80D + 0x100 * num)
82 #define OMAP_TLL_ULPI_INT_EN_FALL(num)                  (0x810 + 0x100 * num)
83 #define OMAP_TLL_ULPI_INT_STATUS(num)                   (0x813 + 0x100 * num)
84 #define OMAP_TLL_ULPI_INT_LATCH(num)                    (0x814 + 0x100 * num)
85 #define OMAP_TLL_ULPI_DEBUG(num)                        (0x815 + 0x100 * num)
86 #define OMAP_TLL_ULPI_SCRATCH_REGISTER(num)             (0x816 + 0x100 * num)
87
88 #define OMAP_TLL_CHANNEL_COUNT                          3
89 #define OMAP_TLL_CHANNEL_1_EN_MASK                      (1 << 0)
90 #define OMAP_TLL_CHANNEL_2_EN_MASK                      (1 << 1)
91 #define OMAP_TLL_CHANNEL_3_EN_MASK                      (1 << 2)
92
93 /* UHH Register Set */
94 #define OMAP_UHH_REVISION                               (0x00)
95 #define OMAP_UHH_SYSCONFIG                              (0x10)
96 #define OMAP_UHH_SYSCONFIG_MIDLEMODE                    (1 << 12)
97 #define OMAP_UHH_SYSCONFIG_CACTIVITY                    (1 << 8)
98 #define OMAP_UHH_SYSCONFIG_SIDLEMODE                    (1 << 3)
99 #define OMAP_UHH_SYSCONFIG_ENAWAKEUP                    (1 << 2)
100 #define OMAP_UHH_SYSCONFIG_SOFTRESET                    (1 << 1)
101 #define OMAP_UHH_SYSCONFIG_AUTOIDLE                     (1 << 0)
102
103 #define OMAP_UHH_SYSSTATUS                              (0x14)
104 #define OMAP_UHH_HOSTCONFIG                             (0x40)
105 #define OMAP_UHH_HOSTCONFIG_ULPI_BYPASS                 (1 << 0)
106 #define OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS              (1 << 0)
107 #define OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS              (1 << 11)
108 #define OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS              (1 << 12)
109 #define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN              (1 << 2)
110 #define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN              (1 << 3)
111 #define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN             (1 << 4)
112 #define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN              (1 << 5)
113 #define OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS           (1 << 8)
114 #define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS           (1 << 9)
115 #define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS           (1 << 10)
116 #define OMAP4_UHH_HOSTCONFIG_APP_START_CLK              (1 << 31)
117
118 /* OMAP4-specific defines */
119 #define OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR              (3 << 2)
120 #define OMAP4_UHH_SYSCONFIG_NOIDLE                      (1 << 2)
121 #define OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR             (3 << 4)
122 #define OMAP4_UHH_SYSCONFIG_NOSTDBY                     (1 << 4)
123 #define OMAP4_UHH_SYSCONFIG_SOFTRESET                   (1 << 0)
124
125 #define OMAP4_P1_MODE_CLEAR                             (3 << 16)
126 #define OMAP4_P1_MODE_TLL                               (1 << 16)
127 #define OMAP4_P1_MODE_HSIC                              (3 << 16)
128 #define OMAP4_P2_MODE_CLEAR                             (3 << 18)
129 #define OMAP4_P2_MODE_TLL                               (1 << 18)
130 #define OMAP4_P2_MODE_HSIC                              (3 << 18)
131
132 #define OMAP_REV2_TLL_CHANNEL_COUNT                     2
133
134 #define OMAP_UHH_DEBUG_CSR                              (0x44)
135
136 /* Values of UHH_REVISION - Note: these are not given in the TRM */
137 #define OMAP_USBHS_REV1         0x00000010      /* OMAP3 */
138 #define OMAP_USBHS_REV2         0x50700100      /* OMAP4 */
139
140 #define is_omap_usbhs_rev1(x)   (x->usbhs_rev == OMAP_USBHS_REV1)
141 #define is_omap_usbhs_rev2(x)   (x->usbhs_rev == OMAP_USBHS_REV2)
142
143 #define is_ehci_phy_mode(x)     (x == OMAP_EHCI_PORT_MODE_PHY)
144 #define is_ehci_tll_mode(x)     (x == OMAP_EHCI_PORT_MODE_TLL)
145 #define is_ehci_hsic_mode(x)    (x == OMAP_EHCI_PORT_MODE_HSIC)
146
147
148 struct usbhs_hcd_omap {
149         struct clk                      *usbhost_ick;
150         struct clk                      *usbhost_hs_fck;
151         struct clk                      *usbhost_fs_fck;
152         struct clk                      *xclk60mhsp1_ck;
153         struct clk                      *xclk60mhsp2_ck;
154         struct clk                      *utmi_p1_fck;
155         struct clk                      *usbhost_p1_fck;
156         struct clk                      *usbtll_p1_fck;
157         struct clk                      *utmi_p2_fck;
158         struct clk                      *usbhost_p2_fck;
159         struct clk                      *usbtll_p2_fck;
160         struct clk                      *init_60m_fclk;
161         struct clk                      *usbtll_fck;
162         struct clk                      *usbtll_ick;
163
164         void __iomem                    *uhh_base;
165         void __iomem                    *tll_base;
166
167         struct usbhs_omap_platform_data platdata;
168
169         u32                             usbhs_rev;
170         spinlock_t                      lock;
171         int                             count;
172 };
173 /*-------------------------------------------------------------------------*/
174
175 const char usbhs_driver_name[] = USBHS_DRIVER_NAME;
176 static u64 usbhs_dmamask = ~(u32)0;
177
178 /*-------------------------------------------------------------------------*/
179
180 static inline void usbhs_write(void __iomem *base, u32 reg, u32 val)
181 {
182         __raw_writel(val, base + reg);
183 }
184
185 static inline u32 usbhs_read(void __iomem *base, u32 reg)
186 {
187         return __raw_readl(base + reg);
188 }
189
190 static inline void usbhs_writeb(void __iomem *base, u8 reg, u8 val)
191 {
192         __raw_writeb(val, base + reg);
193 }
194
195 static inline u8 usbhs_readb(void __iomem *base, u8 reg)
196 {
197         return __raw_readb(base + reg);
198 }
199
200 /*-------------------------------------------------------------------------*/
201
202 static struct platform_device *omap_usbhs_alloc_child(const char *name,
203                         struct resource *res, int num_resources, void *pdata,
204                         size_t pdata_size, struct device *dev)
205 {
206         struct platform_device  *child;
207         int                     ret;
208
209         child = platform_device_alloc(name, 0);
210
211         if (!child) {
212                 dev_err(dev, "platform_device_alloc %s failed\n", name);
213                 goto err_end;
214         }
215
216         ret = platform_device_add_resources(child, res, num_resources);
217         if (ret) {
218                 dev_err(dev, "platform_device_add_resources failed\n");
219                 goto err_alloc;
220         }
221
222         ret = platform_device_add_data(child, pdata, pdata_size);
223         if (ret) {
224                 dev_err(dev, "platform_device_add_data failed\n");
225                 goto err_alloc;
226         }
227
228         child->dev.dma_mask             = &usbhs_dmamask;
229         child->dev.coherent_dma_mask    = 0xffffffff;
230         child->dev.parent               = dev;
231
232         ret = platform_device_add(child);
233         if (ret) {
234                 dev_err(dev, "platform_device_add failed\n");
235                 goto err_alloc;
236         }
237
238         return child;
239
240 err_alloc:
241         platform_device_put(child);
242
243 err_end:
244         return NULL;
245 }
246
247 static int omap_usbhs_alloc_children(struct platform_device *pdev)
248 {
249         struct device                           *dev = &pdev->dev;
250         struct usbhs_hcd_omap                   *omap;
251         struct ehci_hcd_omap_platform_data      *ehci_data;
252         struct ohci_hcd_omap_platform_data      *ohci_data;
253         struct platform_device                  *ehci;
254         struct platform_device                  *ohci;
255         struct resource                         *res;
256         struct resource                         resources[2];
257         int                                     ret;
258
259         omap = platform_get_drvdata(pdev);
260         ehci_data = omap->platdata.ehci_data;
261         ohci_data = omap->platdata.ohci_data;
262
263         res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ehci");
264         if (!res) {
265                 dev_err(dev, "EHCI get resource IORESOURCE_MEM failed\n");
266                 ret = -ENODEV;
267                 goto err_end;
268         }
269         resources[0] = *res;
270
271         res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ehci-irq");
272         if (!res) {
273                 dev_err(dev, " EHCI get resource IORESOURCE_IRQ failed\n");
274                 ret = -ENODEV;
275                 goto err_end;
276         }
277         resources[1] = *res;
278
279         ehci = omap_usbhs_alloc_child(OMAP_EHCI_DEVICE, resources, 2, ehci_data,
280                 sizeof(*ehci_data), dev);
281
282         if (!ehci) {
283                 dev_err(dev, "omap_usbhs_alloc_child failed\n");
284                 ret = -ENOMEM;
285                 goto err_end;
286         }
287
288         res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ohci");
289         if (!res) {
290                 dev_err(dev, "OHCI get resource IORESOURCE_MEM failed\n");
291                 ret = -ENODEV;
292                 goto err_ehci;
293         }
294         resources[0] = *res;
295
296         res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ohci-irq");
297         if (!res) {
298                 dev_err(dev, "OHCI get resource IORESOURCE_IRQ failed\n");
299                 ret = -ENODEV;
300                 goto err_ehci;
301         }
302         resources[1] = *res;
303
304         ohci = omap_usbhs_alloc_child(OMAP_OHCI_DEVICE, resources, 2, ohci_data,
305                 sizeof(*ohci_data), dev);
306         if (!ohci) {
307                 dev_err(dev, "omap_usbhs_alloc_child failed\n");
308                 ret = -ENOMEM;
309                 goto err_ehci;
310         }
311
312         return 0;
313
314 err_ehci:
315         platform_device_unregister(ehci);
316
317 err_end:
318         return ret;
319 }
320
321 /**
322  * usbhs_omap_probe - initialize TI-based HCDs
323  *
324  * Allocates basic resources for this USB host controller.
325  */
326 static int __devinit usbhs_omap_probe(struct platform_device *pdev)
327 {
328         struct device                   *dev =  &pdev->dev;
329         struct usbhs_omap_platform_data *pdata = dev->platform_data;
330         struct usbhs_hcd_omap           *omap;
331         struct resource                 *res;
332         int                             ret = 0;
333         int                             i;
334
335         if (!pdata) {
336                 dev_err(dev, "Missing platform data\n");
337                 ret = -ENOMEM;
338                 goto end_probe;
339         }
340
341         omap = kzalloc(sizeof(*omap), GFP_KERNEL);
342         if (!omap) {
343                 dev_err(dev, "Memory allocation failed\n");
344                 ret = -ENOMEM;
345                 goto end_probe;
346         }
347
348         spin_lock_init(&omap->lock);
349
350         for (i = 0; i < OMAP3_HS_USB_PORTS; i++)
351                 omap->platdata.port_mode[i] = pdata->port_mode[i];
352
353         omap->platdata.ehci_data = pdata->ehci_data;
354         omap->platdata.ohci_data = pdata->ohci_data;
355
356         omap->usbhost_ick = clk_get(dev, "usbhost_ick");
357         if (IS_ERR(omap->usbhost_ick)) {
358                 ret =  PTR_ERR(omap->usbhost_ick);
359                 dev_err(dev, "usbhost_ick failed error:%d\n", ret);
360                 goto err_end;
361         }
362
363         omap->usbhost_hs_fck = clk_get(dev, "hs_fck");
364         if (IS_ERR(omap->usbhost_hs_fck)) {
365                 ret = PTR_ERR(omap->usbhost_hs_fck);
366                 dev_err(dev, "usbhost_hs_fck failed error:%d\n", ret);
367                 goto err_usbhost_ick;
368         }
369
370         omap->usbhost_fs_fck = clk_get(dev, "fs_fck");
371         if (IS_ERR(omap->usbhost_fs_fck)) {
372                 ret = PTR_ERR(omap->usbhost_fs_fck);
373                 dev_err(dev, "usbhost_fs_fck failed error:%d\n", ret);
374                 goto err_usbhost_hs_fck;
375         }
376
377         omap->usbtll_fck = clk_get(dev, "usbtll_fck");
378         if (IS_ERR(omap->usbtll_fck)) {
379                 ret = PTR_ERR(omap->usbtll_fck);
380                 dev_err(dev, "usbtll_fck failed error:%d\n", ret);
381                 goto err_usbhost_fs_fck;
382         }
383
384         omap->usbtll_ick = clk_get(dev, "usbtll_ick");
385         if (IS_ERR(omap->usbtll_ick)) {
386                 ret = PTR_ERR(omap->usbtll_ick);
387                 dev_err(dev, "usbtll_ick failed error:%d\n", ret);
388                 goto err_usbtll_fck;
389         }
390
391         omap->utmi_p1_fck = clk_get(dev, "utmi_p1_gfclk");
392         if (IS_ERR(omap->utmi_p1_fck)) {
393                 ret = PTR_ERR(omap->utmi_p1_fck);
394                 dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret);
395                 goto err_usbtll_ick;
396         }
397
398         omap->xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck");
399         if (IS_ERR(omap->xclk60mhsp1_ck)) {
400                 ret = PTR_ERR(omap->xclk60mhsp1_ck);
401                 dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret);
402                 goto err_utmi_p1_fck;
403         }
404
405         omap->utmi_p2_fck = clk_get(dev, "utmi_p2_gfclk");
406         if (IS_ERR(omap->utmi_p2_fck)) {
407                 ret = PTR_ERR(omap->utmi_p2_fck);
408                 dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret);
409                 goto err_xclk60mhsp1_ck;
410         }
411
412         omap->xclk60mhsp2_ck = clk_get(dev, "xclk60mhsp2_ck");
413         if (IS_ERR(omap->xclk60mhsp2_ck)) {
414                 ret = PTR_ERR(omap->xclk60mhsp2_ck);
415                 dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret);
416                 goto err_utmi_p2_fck;
417         }
418
419         omap->usbhost_p1_fck = clk_get(dev, "usb_host_hs_utmi_p1_clk");
420         if (IS_ERR(omap->usbhost_p1_fck)) {
421                 ret = PTR_ERR(omap->usbhost_p1_fck);
422                 dev_err(dev, "usbhost_p1_fck failed error:%d\n", ret);
423                 goto err_xclk60mhsp2_ck;
424         }
425
426         omap->usbtll_p1_fck = clk_get(dev, "usb_tll_hs_usb_ch0_clk");
427         if (IS_ERR(omap->usbtll_p1_fck)) {
428                 ret = PTR_ERR(omap->usbtll_p1_fck);
429                 dev_err(dev, "usbtll_p1_fck failed error:%d\n", ret);
430                 goto err_usbhost_p1_fck;
431         }
432
433         omap->usbhost_p2_fck = clk_get(dev, "usb_host_hs_utmi_p2_clk");
434         if (IS_ERR(omap->usbhost_p2_fck)) {
435                 ret = PTR_ERR(omap->usbhost_p2_fck);
436                 dev_err(dev, "usbhost_p2_fck failed error:%d\n", ret);
437                 goto err_usbtll_p1_fck;
438         }
439
440         omap->usbtll_p2_fck = clk_get(dev, "usb_tll_hs_usb_ch1_clk");
441         if (IS_ERR(omap->usbtll_p2_fck)) {
442                 ret = PTR_ERR(omap->usbtll_p2_fck);
443                 dev_err(dev, "usbtll_p2_fck failed error:%d\n", ret);
444                 goto err_usbhost_p2_fck;
445         }
446
447         omap->init_60m_fclk = clk_get(dev, "init_60m_fclk");
448         if (IS_ERR(omap->init_60m_fclk)) {
449                 ret = PTR_ERR(omap->init_60m_fclk);
450                 dev_err(dev, "init_60m_fclk failed error:%d\n", ret);
451                 goto err_usbtll_p2_fck;
452         }
453
454         res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "uhh");
455         if (!res) {
456                 dev_err(dev, "UHH EHCI get resource failed\n");
457                 ret = -ENODEV;
458                 goto err_init_60m_fclk;
459         }
460
461         omap->uhh_base = ioremap(res->start, resource_size(res));
462         if (!omap->uhh_base) {
463                 dev_err(dev, "UHH ioremap failed\n");
464                 ret = -ENOMEM;
465                 goto err_init_60m_fclk;
466         }
467
468         res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "tll");
469         if (!res) {
470                 dev_err(dev, "UHH EHCI get resource failed\n");
471                 ret = -ENODEV;
472                 goto err_tll;
473         }
474
475         omap->tll_base = ioremap(res->start, resource_size(res));
476         if (!omap->tll_base) {
477                 dev_err(dev, "TLL ioremap failed\n");
478                 ret = -ENOMEM;
479                 goto err_tll;
480         }
481
482         platform_set_drvdata(pdev, omap);
483
484         ret = omap_usbhs_alloc_children(pdev);
485         if (ret) {
486                 dev_err(dev, "omap_usbhs_alloc_children failed\n");
487                 goto err_alloc;
488         }
489
490         goto end_probe;
491
492 err_alloc:
493         iounmap(omap->tll_base);
494
495 err_tll:
496         iounmap(omap->uhh_base);
497
498 err_init_60m_fclk:
499         clk_put(omap->init_60m_fclk);
500
501 err_usbtll_p2_fck:
502         clk_put(omap->usbtll_p2_fck);
503
504 err_usbhost_p2_fck:
505         clk_put(omap->usbhost_p2_fck);
506
507 err_usbtll_p1_fck:
508         clk_put(omap->usbtll_p1_fck);
509
510 err_usbhost_p1_fck:
511         clk_put(omap->usbhost_p1_fck);
512
513 err_xclk60mhsp2_ck:
514         clk_put(omap->xclk60mhsp2_ck);
515
516 err_utmi_p2_fck:
517         clk_put(omap->utmi_p2_fck);
518
519 err_xclk60mhsp1_ck:
520         clk_put(omap->xclk60mhsp1_ck);
521
522 err_utmi_p1_fck:
523         clk_put(omap->utmi_p1_fck);
524
525 err_usbtll_ick:
526         clk_put(omap->usbtll_ick);
527
528 err_usbtll_fck:
529         clk_put(omap->usbtll_fck);
530
531 err_usbhost_fs_fck:
532         clk_put(omap->usbhost_fs_fck);
533
534 err_usbhost_hs_fck:
535         clk_put(omap->usbhost_hs_fck);
536
537 err_usbhost_ick:
538         clk_put(omap->usbhost_ick);
539
540 err_end:
541         kfree(omap);
542
543 end_probe:
544         return ret;
545 }
546
547 /**
548  * usbhs_omap_remove - shutdown processing for UHH & TLL HCDs
549  * @pdev: USB Host Controller being removed
550  *
551  * Reverses the effect of usbhs_omap_probe().
552  */
553 static int __devexit usbhs_omap_remove(struct platform_device *pdev)
554 {
555         struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev);
556
557         if (omap->count != 0) {
558                 dev_err(&pdev->dev,
559                         "Either EHCI or OHCI is still using usbhs core\n");
560                 return -EBUSY;
561         }
562
563         iounmap(omap->tll_base);
564         iounmap(omap->uhh_base);
565         clk_put(omap->init_60m_fclk);
566         clk_put(omap->usbtll_p2_fck);
567         clk_put(omap->usbhost_p2_fck);
568         clk_put(omap->usbtll_p1_fck);
569         clk_put(omap->usbhost_p1_fck);
570         clk_put(omap->xclk60mhsp2_ck);
571         clk_put(omap->utmi_p2_fck);
572         clk_put(omap->xclk60mhsp1_ck);
573         clk_put(omap->utmi_p1_fck);
574         clk_put(omap->usbtll_ick);
575         clk_put(omap->usbtll_fck);
576         clk_put(omap->usbhost_fs_fck);
577         clk_put(omap->usbhost_hs_fck);
578         clk_put(omap->usbhost_ick);
579         kfree(omap);
580
581         return 0;
582 }
583
584 static bool is_ohci_port(enum usbhs_omap_port_mode pmode)
585 {
586         switch (pmode) {
587         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
588         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
589         case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
590         case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
591         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
592         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
593         case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
594         case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
595         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
596         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
597                 return true;
598
599         default:
600                 return false;
601         }
602 }
603
604 /*
605  * convert the port-mode enum to a value we can use in the FSLSMODE
606  * field of USBTLL_CHANNEL_CONF
607  */
608 static unsigned ohci_omap3_fslsmode(enum usbhs_omap_port_mode mode)
609 {
610         switch (mode) {
611         case OMAP_USBHS_PORT_MODE_UNUSED:
612         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
613                 return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0;
614
615         case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
616                 return OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM;
617
618         case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
619                 return OMAP_TLL_FSLSMODE_3PIN_PHY;
620
621         case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
622                 return OMAP_TLL_FSLSMODE_4PIN_PHY;
623
624         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
625                 return OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0;
626
627         case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
628                 return OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM;
629
630         case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
631                 return OMAP_TLL_FSLSMODE_3PIN_TLL;
632
633         case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
634                 return OMAP_TLL_FSLSMODE_4PIN_TLL;
635
636         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
637                 return OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0;
638
639         case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
640                 return OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM;
641         default:
642                 pr_warning("Invalid port mode, using default\n");
643                 return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0;
644         }
645 }
646
647 static void usbhs_omap_tll_init(struct device *dev, u8 tll_channel_count)
648 {
649         struct usbhs_hcd_omap           *omap = dev_get_drvdata(dev);
650         struct usbhs_omap_platform_data *pdata = dev->platform_data;
651         unsigned                        reg;
652         int                             i;
653
654         /* Program Common TLL register */
655         reg = usbhs_read(omap->tll_base, OMAP_TLL_SHARED_CONF);
656         reg |= (OMAP_TLL_SHARED_CONF_FCLK_IS_ON
657                 | OMAP_TLL_SHARED_CONF_USB_DIVRATION);
658         reg &= ~OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN;
659         reg &= ~OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN;
660
661         usbhs_write(omap->tll_base, OMAP_TLL_SHARED_CONF, reg);
662
663         /* Enable channels now */
664         for (i = 0; i < tll_channel_count; i++) {
665                 reg = usbhs_read(omap->tll_base,
666                                 OMAP_TLL_CHANNEL_CONF(i));
667
668                 if (is_ohci_port(pdata->port_mode[i])) {
669                         reg |= ohci_omap3_fslsmode(pdata->port_mode[i])
670                                 << OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT;
671                         reg |= OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS;
672                 } else if (pdata->port_mode[i] == OMAP_EHCI_PORT_MODE_TLL) {
673
674                         /* Disable AutoIdle, BitStuffing and use SDR Mode */
675                         reg &= ~(OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE
676                                 | OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF
677                                 | OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE);
678
679                         reg |= (1 << (i + 1));
680                 } else
681                         continue;
682
683                 reg |= OMAP_TLL_CHANNEL_CONF_CHANEN;
684                 usbhs_write(omap->tll_base,
685                                 OMAP_TLL_CHANNEL_CONF(i), reg);
686
687                 usbhs_writeb(omap->tll_base,
688                                 OMAP_TLL_ULPI_SCRATCH_REGISTER(i), 0xbe);
689         }
690 }
691
692 static int usbhs_enable(struct device *dev)
693 {
694         struct usbhs_hcd_omap           *omap = dev_get_drvdata(dev);
695         struct usbhs_omap_platform_data *pdata = &omap->platdata;
696         unsigned long                   flags = 0;
697         int                             ret = 0;
698         unsigned long                   timeout;
699         unsigned                        reg;
700
701         dev_dbg(dev, "starting TI HSUSB Controller\n");
702         if (!pdata) {
703                 dev_dbg(dev, "missing platform_data\n");
704                 return  -ENODEV;
705         }
706
707         spin_lock_irqsave(&omap->lock, flags);
708         if (omap->count > 0)
709                 goto end_count;
710
711         clk_enable(omap->usbhost_ick);
712         clk_enable(omap->usbhost_hs_fck);
713         clk_enable(omap->usbhost_fs_fck);
714         clk_enable(omap->usbtll_fck);
715         clk_enable(omap->usbtll_ick);
716
717         if (pdata->ehci_data->phy_reset) {
718                 if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) {
719                         gpio_request(pdata->ehci_data->reset_gpio_port[0],
720                                                 "USB1 PHY reset");
721                         gpio_direction_output
722                                 (pdata->ehci_data->reset_gpio_port[0], 0);
723                 }
724
725                 if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) {
726                         gpio_request(pdata->ehci_data->reset_gpio_port[1],
727                                                 "USB2 PHY reset");
728                         gpio_direction_output
729                                 (pdata->ehci_data->reset_gpio_port[1], 0);
730                 }
731
732                 /* Hold the PHY in RESET for enough time till DIR is high */
733                 udelay(10);
734         }
735
736         omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION);
737         dev_dbg(dev, "OMAP UHH_REVISION 0x%x\n", omap->usbhs_rev);
738
739         /* perform TLL soft reset, and wait until reset is complete */
740         usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG,
741                         OMAP_USBTLL_SYSCONFIG_SOFTRESET);
742
743         /* Wait for TLL reset to complete */
744         timeout = jiffies + msecs_to_jiffies(1000);
745         while (!(usbhs_read(omap->tll_base, OMAP_USBTLL_SYSSTATUS)
746                         & OMAP_USBTLL_SYSSTATUS_RESETDONE)) {
747                 cpu_relax();
748
749                 if (time_after(jiffies, timeout)) {
750                         dev_dbg(dev, "operation timed out\n");
751                         ret = -EINVAL;
752                         goto err_tll;
753                 }
754         }
755
756         dev_dbg(dev, "TLL RESET DONE\n");
757
758         /* (1<<3) = no idle mode only for initial debugging */
759         usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG,
760                         OMAP_USBTLL_SYSCONFIG_ENAWAKEUP |
761                         OMAP_USBTLL_SYSCONFIG_SIDLEMODE |
762                         OMAP_USBTLL_SYSCONFIG_AUTOIDLE);
763
764         /* Put UHH in NoIdle/NoStandby mode */
765         reg = usbhs_read(omap->uhh_base, OMAP_UHH_SYSCONFIG);
766         if (is_omap_usbhs_rev1(omap)) {
767                 reg |= (OMAP_UHH_SYSCONFIG_ENAWAKEUP
768                                 | OMAP_UHH_SYSCONFIG_SIDLEMODE
769                                 | OMAP_UHH_SYSCONFIG_CACTIVITY
770                                 | OMAP_UHH_SYSCONFIG_MIDLEMODE);
771                 reg &= ~OMAP_UHH_SYSCONFIG_AUTOIDLE;
772
773
774         } else if (is_omap_usbhs_rev2(omap)) {
775                 reg &= ~OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR;
776                 reg |= OMAP4_UHH_SYSCONFIG_NOIDLE;
777                 reg &= ~OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR;
778                 reg |= OMAP4_UHH_SYSCONFIG_NOSTDBY;
779         }
780
781         usbhs_write(omap->uhh_base, OMAP_UHH_SYSCONFIG, reg);
782
783         reg = usbhs_read(omap->uhh_base, OMAP_UHH_HOSTCONFIG);
784         /* setup ULPI bypass and burst configurations */
785         reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN
786                         | OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN
787                         | OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN);
788         reg |= OMAP4_UHH_HOSTCONFIG_APP_START_CLK;
789         reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN;
790
791         if (is_omap_usbhs_rev1(omap)) {
792                 if (pdata->port_mode[0] == OMAP_USBHS_PORT_MODE_UNUSED)
793                         reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS;
794                 if (pdata->port_mode[1] == OMAP_USBHS_PORT_MODE_UNUSED)
795                         reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS;
796                 if (pdata->port_mode[2] == OMAP_USBHS_PORT_MODE_UNUSED)
797                         reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS;
798
799                 /* Bypass the TLL module for PHY mode operation */
800                 if (cpu_is_omap3430() && (omap_rev() <= OMAP3430_REV_ES2_1)) {
801                         dev_dbg(dev, "OMAP3 ES version <= ES2.1\n");
802                         if (is_ehci_phy_mode(pdata->port_mode[0]) ||
803                                 is_ehci_phy_mode(pdata->port_mode[1]) ||
804                                         is_ehci_phy_mode(pdata->port_mode[2]))
805                                 reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
806                         else
807                                 reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
808                 } else {
809                         dev_dbg(dev, "OMAP3 ES version > ES2.1\n");
810                         if (is_ehci_phy_mode(pdata->port_mode[0]))
811                                 reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
812                         else
813                                 reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
814                         if (is_ehci_phy_mode(pdata->port_mode[1]))
815                                 reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
816                         else
817                                 reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
818                         if (is_ehci_phy_mode(pdata->port_mode[2]))
819                                 reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
820                         else
821                                 reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
822                 }
823         } else if (is_omap_usbhs_rev2(omap)) {
824                 /* Clear port mode fields for PHY mode*/
825                 reg &= ~OMAP4_P1_MODE_CLEAR;
826                 reg &= ~OMAP4_P2_MODE_CLEAR;
827
828                 if (is_ehci_phy_mode(pdata->port_mode[0])) {
829                         ret = clk_set_parent(omap->utmi_p1_fck,
830                                                 omap->xclk60mhsp1_ck);
831                         if (ret != 0) {
832                                 dev_err(dev, "xclk60mhsp1_ck set parent"
833                                 "failed error:%d\n", ret);
834                                 goto err_tll;
835                         }
836                 } else if (is_ehci_tll_mode(pdata->port_mode[0])) {
837                         ret = clk_set_parent(omap->utmi_p1_fck,
838                                                 omap->init_60m_fclk);
839                         if (ret != 0) {
840                                 dev_err(dev, "init_60m_fclk set parent"
841                                 "failed error:%d\n", ret);
842                                 goto err_tll;
843                         }
844                         clk_enable(omap->usbhost_p1_fck);
845                         clk_enable(omap->usbtll_p1_fck);
846                 }
847
848                 if (is_ehci_phy_mode(pdata->port_mode[1])) {
849                         ret = clk_set_parent(omap->utmi_p2_fck,
850                                                 omap->xclk60mhsp2_ck);
851                         if (ret != 0) {
852                                 dev_err(dev, "xclk60mhsp1_ck set parent"
853                                         "failed error:%d\n", ret);
854                                 goto err_tll;
855                         }
856                 } else if (is_ehci_tll_mode(pdata->port_mode[1])) {
857                         ret = clk_set_parent(omap->utmi_p2_fck,
858                                                 omap->init_60m_fclk);
859                         if (ret != 0) {
860                                 dev_err(dev, "init_60m_fclk set parent"
861                                 "failed error:%d\n", ret);
862                                 goto err_tll;
863                         }
864                         clk_enable(omap->usbhost_p2_fck);
865                         clk_enable(omap->usbtll_p2_fck);
866                 }
867
868                 clk_enable(omap->utmi_p1_fck);
869                 clk_enable(omap->utmi_p2_fck);
870
871                 if (is_ehci_tll_mode(pdata->port_mode[0]) ||
872                         (is_ohci_port(pdata->port_mode[0])))
873                         reg |= OMAP4_P1_MODE_TLL;
874                 else if (is_ehci_hsic_mode(pdata->port_mode[0]))
875                         reg |= OMAP4_P1_MODE_HSIC;
876
877                 if (is_ehci_tll_mode(pdata->port_mode[1]) ||
878                         (is_ohci_port(pdata->port_mode[1])))
879                         reg |= OMAP4_P2_MODE_TLL;
880                 else if (is_ehci_hsic_mode(pdata->port_mode[1]))
881                         reg |= OMAP4_P2_MODE_HSIC;
882         }
883
884         usbhs_write(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg);
885         dev_dbg(dev, "UHH setup done, uhh_hostconfig=%x\n", reg);
886
887         if (is_ehci_tll_mode(pdata->port_mode[0]) ||
888                 is_ehci_tll_mode(pdata->port_mode[1]) ||
889                 is_ehci_tll_mode(pdata->port_mode[2]) ||
890                 (is_ohci_port(pdata->port_mode[0])) ||
891                 (is_ohci_port(pdata->port_mode[1])) ||
892                 (is_ohci_port(pdata->port_mode[2]))) {
893
894                 /* Enable UTMI mode for required TLL channels */
895                 if (is_omap_usbhs_rev2(omap))
896                         usbhs_omap_tll_init(dev, OMAP_REV2_TLL_CHANNEL_COUNT);
897                 else
898                         usbhs_omap_tll_init(dev, OMAP_TLL_CHANNEL_COUNT);
899         }
900
901         if (pdata->ehci_data->phy_reset) {
902                 /* Hold the PHY in RESET for enough time till
903                  * PHY is settled and ready
904                  */
905                 udelay(10);
906
907                 if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
908                         gpio_set_value
909                                 (pdata->ehci_data->reset_gpio_port[0], 1);
910
911                 if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
912                         gpio_set_value
913                                 (pdata->ehci_data->reset_gpio_port[1], 1);
914         }
915
916 end_count:
917         omap->count++;
918         spin_unlock_irqrestore(&omap->lock, flags);
919         return 0;
920
921 err_tll:
922         if (pdata->ehci_data->phy_reset) {
923                 if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
924                         gpio_free(pdata->ehci_data->reset_gpio_port[0]);
925
926                 if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
927                         gpio_free(pdata->ehci_data->reset_gpio_port[1]);
928         }
929
930         clk_disable(omap->usbtll_ick);
931         clk_disable(omap->usbtll_fck);
932         clk_disable(omap->usbhost_fs_fck);
933         clk_disable(omap->usbhost_hs_fck);
934         clk_disable(omap->usbhost_ick);
935         spin_unlock_irqrestore(&omap->lock, flags);
936         return ret;
937 }
938
939 static void usbhs_disable(struct device *dev)
940 {
941         struct usbhs_hcd_omap           *omap = dev_get_drvdata(dev);
942         struct usbhs_omap_platform_data *pdata = &omap->platdata;
943         unsigned long                   flags = 0;
944         unsigned long                   timeout;
945
946         dev_dbg(dev, "stopping TI HSUSB Controller\n");
947
948         spin_lock_irqsave(&omap->lock, flags);
949
950         if (omap->count == 0)
951                 goto end_disble;
952
953         omap->count--;
954
955         if (omap->count != 0)
956                 goto end_disble;
957
958         /* Reset OMAP modules for insmod/rmmod to work */
959         usbhs_write(omap->uhh_base, OMAP_UHH_SYSCONFIG,
960                         is_omap_usbhs_rev2(omap) ?
961                         OMAP4_UHH_SYSCONFIG_SOFTRESET :
962                         OMAP_UHH_SYSCONFIG_SOFTRESET);
963
964         timeout = jiffies + msecs_to_jiffies(100);
965         while (!(usbhs_read(omap->uhh_base, OMAP_UHH_SYSSTATUS)
966                                 & (1 << 0))) {
967                 cpu_relax();
968
969                 if (time_after(jiffies, timeout))
970                         dev_dbg(dev, "operation timed out\n");
971         }
972
973         while (!(usbhs_read(omap->uhh_base, OMAP_UHH_SYSSTATUS)
974                                 & (1 << 1))) {
975                 cpu_relax();
976
977                 if (time_after(jiffies, timeout))
978                         dev_dbg(dev, "operation timed out\n");
979         }
980
981         while (!(usbhs_read(omap->uhh_base, OMAP_UHH_SYSSTATUS)
982                                 & (1 << 2))) {
983                 cpu_relax();
984
985                 if (time_after(jiffies, timeout))
986                         dev_dbg(dev, "operation timed out\n");
987         }
988
989         usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG, (1 << 1));
990
991         while (!(usbhs_read(omap->tll_base, OMAP_USBTLL_SYSSTATUS)
992                                 & (1 << 0))) {
993                 cpu_relax();
994
995                 if (time_after(jiffies, timeout))
996                         dev_dbg(dev, "operation timed out\n");
997         }
998
999         if (is_omap_usbhs_rev2(omap)) {
1000                 if (is_ehci_tll_mode(pdata->port_mode[0]))
1001                         clk_enable(omap->usbtll_p1_fck);
1002                 if (is_ehci_tll_mode(pdata->port_mode[1]))
1003                         clk_enable(omap->usbtll_p2_fck);
1004                 clk_disable(omap->utmi_p2_fck);
1005                 clk_disable(omap->utmi_p1_fck);
1006         }
1007
1008         clk_disable(omap->usbtll_ick);
1009         clk_disable(omap->usbtll_fck);
1010         clk_disable(omap->usbhost_fs_fck);
1011         clk_disable(omap->usbhost_hs_fck);
1012         clk_disable(omap->usbhost_ick);
1013
1014         /* The gpio_free migh sleep; so unlock the spinlock */
1015         spin_unlock_irqrestore(&omap->lock, flags);
1016
1017         if (pdata->ehci_data->phy_reset) {
1018                 if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
1019                         gpio_free(pdata->ehci_data->reset_gpio_port[0]);
1020
1021                 if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
1022                         gpio_free(pdata->ehci_data->reset_gpio_port[1]);
1023         }
1024         return;
1025
1026 end_disble:
1027         spin_unlock_irqrestore(&omap->lock, flags);
1028 }
1029
1030 int omap_usbhs_enable(struct device *dev)
1031 {
1032         return  usbhs_enable(dev->parent);
1033 }
1034 EXPORT_SYMBOL_GPL(omap_usbhs_enable);
1035
1036 void omap_usbhs_disable(struct device *dev)
1037 {
1038         usbhs_disable(dev->parent);
1039 }
1040 EXPORT_SYMBOL_GPL(omap_usbhs_disable);
1041
1042 static struct platform_driver usbhs_omap_driver = {
1043         .driver = {
1044                 .name           = (char *)usbhs_driver_name,
1045                 .owner          = THIS_MODULE,
1046         },
1047         .remove         = __exit_p(usbhs_omap_remove),
1048 };
1049
1050 MODULE_AUTHOR("Keshava Munegowda <keshava_mgowda@ti.com>");
1051 MODULE_ALIAS("platform:" USBHS_DRIVER_NAME);
1052 MODULE_LICENSE("GPL v2");
1053 MODULE_DESCRIPTION("usb host common core driver for omap EHCI and OHCI");
1054
1055 static int __init omap_usbhs_drvinit(void)
1056 {
1057         return platform_driver_probe(&usbhs_omap_driver, usbhs_omap_probe);
1058 }
1059
1060 /*
1061  * init before ehci and ohci drivers;
1062  * The usbhs core driver should be initialized much before
1063  * the omap ehci and ohci probe functions are called.
1064  */
1065 fs_initcall(omap_usbhs_drvinit);
1066
1067 static void __exit omap_usbhs_drvexit(void)
1068 {
1069         platform_driver_unregister(&usbhs_omap_driver);
1070 }
1071 module_exit(omap_usbhs_drvexit);