2 # Multifunction miscellaneous devices
6 menu "Multifunction device drivers"
14 bool "Support Marvell 88PM8606/88PM8607"
15 depends on I2C=y && GENERIC_HARDIRQS
19 This supports for Marvell 88PM8606/88PM8607 Power Management IC.
20 This includes the I2C driver and the core APIs _only_, you have to
21 select individual components like voltage regulators, RTC and
22 battery-charger under the corresponding menus.
25 tristate "Support Marvell 88PM800"
26 depends on I2C=y && GENERIC_HARDIRQS
31 This supports for Marvell 88PM800 Power Management IC.
32 This includes the I2C driver and the core APIs _only_, you have to
33 select individual components like voltage regulators, RTC and
34 battery-charger under the corresponding menus.
37 tristate "Support Marvell 88PM805"
38 depends on I2C=y && GENERIC_HARDIRQS
43 This supports for Marvell 88PM805 Power Management IC. This includes
44 the I2C driver and the core APIs _only_, you have to select individual
45 components like codec device, headset/Mic device under the
49 tristate "Support for Silicon Motion SM501"
51 This is the core driver for the Silicon Motion SM501 multimedia
52 companion chip. This device is a multifunction device which may
53 provide numerous interfaces including USB host controller, USB gadget,
54 asynchronous serial ports, audio functions, and a dual display video
55 interface. The device may be connected by PCI or local bus with
56 varying functions enabled.
59 bool "Export GPIO via GPIO layer"
60 depends on MFD_SM501 && GPIOLIB
62 This option uses the gpio library layer to export the 64 GPIO
63 lines on the SM501. The platform data is used to supply the
64 base number for the first GPIO line to register.
67 tristate "Support for Realtek PCI-E card reader"
71 This supports for Realtek PCI-Express card reader including rts5209,
72 rts5229, rtl8411, etc. Realtek card reader supports access to many
73 types of memory cards, such as Memory Stick, Memory Stick Pro,
74 Secure Digital and MultiMediaCard.
77 bool "Support for Compaq ASIC3"
78 depends on GENERIC_HARDIRQS && GPIOLIB && ARM
81 This driver supports the ASIC3 multifunction chip found on many
82 PDAs (mainly iPAQ and HTC based ones)
84 config MFD_DAVINCI_VOICECODEC
88 config MFD_DM355EVM_MSP
89 bool "DaVinci DM355 EVM microcontroller"
90 depends on I2C=y && MACH_DAVINCI_DM355_EVM
92 This driver supports the MSP430 microcontroller used on these
93 boards. MSP430 firmware manages resets and power sequencing,
94 inputs from buttons and the IR remote, LEDs, an RTC, and more.
97 tristate "TI Sequencer Serial Port support"
98 depends on ARCH_DAVINCI_TNETV107X
101 Say Y here if you want support for the Sequencer Serial Port
102 in a Texas Instruments TNETV107X SoC.
104 To compile this driver as a module, choose M here: the
105 module will be called ti-ssp.
108 bool "HTC EGPIO support"
109 depends on GENERIC_HARDIRQS && GPIOLIB && ARM
111 This driver supports the CPLD egpio chip present on
112 several HTC phones. It provides basic support for input
113 pins, output pins, and irqs.
116 tristate "HTC PASIC3 LED/DS1WM chip support"
119 This core driver provides register access for the LED/DS1WM
120 chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
121 HTC Magician devices, respectively. Actual functionality is
122 handled by the leds-pasic3 and ds1wm drivers.
125 bool "HTC I2C PLD chip support"
126 depends on I2C=y && GPIOLIB
128 If you say yes here you get support for the supposed CPLD
129 found on omap850 HTC devices like the HTC Wizard and HTC Herald.
130 This device provides input and output GPIOs through an I2C
131 interface to one or more sub-chips.
134 tristate "Philips UCB1400 Core driver"
138 This enables support for the Philips UCB1400 core functions.
139 The UCB1400 is an AC97 audio codec.
141 To compile this driver as a module, choose M here: the
142 module will be called ucb1400_core.
145 tristate "LM3533 Lighting Power chip"
150 Say yes here to enable support for National Semiconductor / TI
151 LM3533 Lighting Power chips.
153 This driver provides common support for accessing the device;
154 additional drivers must be enabled in order to use the LED,
155 backlight or ambient-light-sensor functionality of the device.
158 tristate "TPS61050/61052 Boost Converters"
162 select REGULATOR_FIXED_VOLTAGE
164 This option enables a driver for the TP61050/TPS61052
165 high-power "white LED driver". This boost converter is
166 sometimes used for other things than white LEDs, and
167 also contains a GPIO pin.
170 tristate "TPS6501x Power Management chips"
171 depends on I2C && GPIOLIB
172 default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
174 If you say yes here you get support for the TPS6501x series of
175 Power Management chips. These include voltage regulators,
176 lithium ion/polymer battery charging, and other features that
177 are often used in portable devices like cell phones and cameras.
179 This driver can also be built as a module. If so, the module
180 will be called tps65010.
183 tristate "TPS6507x Power Management / Touch Screen chips"
187 If you say yes here you get support for the TPS6507x series of
188 Power Management / Touch Screen chips. These include voltage
189 regulators, lithium ion/polymer battery charging, touch screen
190 and other features that are often used in portable devices.
191 This driver can also be built as a module. If so, the module
192 will be called tps6507x.
195 tristate "TPS65217 Power Management / White LED chips"
200 If you say yes here you get support for the TPS65217 series of
201 Power Management / White LED chips.
202 These include voltage regulators, lithium ion/polymer battery
203 charger, wled and other features that are often used in portable
206 This driver can also be built as a module. If so, the module
207 will be called tps65217.
210 bool "TPS6586x Power Management chips"
211 depends on I2C=y && GENERIC_HARDIRQS
216 If you say yes here you get support for the TPS6586X series of
217 Power Management chips.
218 This driver provides common support for accessing the device,
219 additional drivers must be enabled in order to use the
220 functionality of the device.
222 This driver can also be built as a module. If so, the module
223 will be called tps6586x.
226 bool "TPS65910 Power Management chip"
227 depends on I2C=y && GPIOLIB
232 if you say yes here you get support for the TPS65910 series of
233 Power Management chips.
239 config MFD_TPS65912_I2C
240 bool "TPS65912 Power Management chip with I2C"
243 depends on I2C=y && GPIOLIB
245 If you say yes here you get support for the TPS65912 series of
246 PM chips with I2C interface.
248 config MFD_TPS65912_SPI
249 bool "TPS65912 Power Management chip with SPI"
252 depends on SPI_MASTER && GPIOLIB
254 If you say yes here you get support for the TPS65912 series of
255 PM chips with SPI interface.
258 bool "Texas Instruments TWL92330/Menelaus PM chip"
259 depends on I2C=y && ARCH_OMAP2
261 If you say yes here you get support for the Texas Instruments
262 TWL92330/Menelaus Power Management chip. This include voltage
263 regulators, Dual slot memory card transceivers, real-time clock
264 and other features that are often used in portable devices like
265 cell phones and PDAs.
268 bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support"
269 depends on I2C=y && GENERIC_HARDIRQS
272 Say yes here if you have TWL4030 / TWL6030 family chip on your board.
273 This core driver provides register access and IRQ handling
274 facilities, and registers devices for the various functions
275 so that function-specific drivers can bind to them.
277 These multi-function chips are found on many OMAP2 and OMAP3
278 boards, providing power management, RTC, GPIO, keypad, a
279 high speed USB OTG transceiver, an audio codec (on most
280 versions) and many other features.
283 tristate "Texas Instruments TWL4030 MADC"
284 depends on TWL4030_CORE
286 This driver provides support for triton TWL4030-MADC. The
287 driver supports both RT and SW conversion methods.
289 This driver can be built as a module. If so it will be
293 bool "Support power resources on TWL4030 family chips"
294 depends on TWL4030_CORE && ARM
296 Say yes here if you want to use the power resources on the
297 TWL4030 family chips. Most of these resources are regulators,
298 which have a separate driver; some are control signals, such
299 as clock request handshaking.
301 This driver uses board-specific data to initialize the resources
302 and load scripts controlling which resources are switched off/on
303 or reset when a sleep, wakeup or warm reset event occurs.
305 config MFD_TWL4030_AUDIO
307 depends on TWL4030_CORE
312 bool "Support for TWL6040 audio codec"
313 depends on I2C=y && GENERIC_HARDIRQS
319 Say yes here if you want support for Texas Instruments TWL6040 audio
321 This driver provides common support for accessing the device,
322 additional drivers must be enabled in order to use the
323 functionality of the device (audio, vibra).
326 bool "Support STMicroelectronics STMPE"
327 depends on (I2C=y || SPI_MASTER=y) && GENERIC_HARDIRQS
330 Support for the STMPE family of I/O Expanders from
333 Currently supported devices are:
335 STMPE811: GPIO, Touchscreen
336 STMPE1601: GPIO, Keypad
337 STMPE2401: GPIO, Keypad
338 STMPE2403: GPIO, Keypad
340 This driver provides common support for accessing the device,
341 additional drivers must be enabled in order to use the functionality
342 of the device. Currently available sub drivers are:
346 Touchscreen: stmpe-ts
348 menu "STMPE Interface Drivers"
352 bool "STMPE I2C Inteface"
356 This is used to enable I2C interface of STMPE
359 bool "STMPE SPI Inteface"
360 depends on SPI_MASTER
362 This is used to enable SPI interface of STMPE
366 bool "Support Toshiba TC35892 and variants"
367 depends on I2C=y && GENERIC_HARDIRQS
370 Support for the Toshiba TC35892 and variants I/O Expander.
372 This driver provides common support for accessing the device,
373 additional drivers must be enabled in order to use the
374 functionality of the device.
381 bool "Support Toshiba T7L66XB"
382 depends on ARM && HAVE_CLK
386 Support for Toshiba Mobile IO Controller T7L66XB
389 bool "Support for the SMSC ECE1099 series chips"
394 If you say yes here you get support for the
395 ece1099 chips from SMSC.
397 To compile this driver as a module, choose M here: the
398 module will be called smsc.
401 bool "Support Toshiba TC6387XB"
402 depends on ARM && HAVE_CLK
406 Support for Toshiba Mobile IO Controller TC6387XB
409 bool "Support Toshiba TC6393XB"
410 depends on ARM && HAVE_CLK
415 Support for Toshiba Mobile IO Controller TC6393XB
418 bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
421 Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
422 ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
423 usually found on PXA processors-based platforms. This includes
424 the I2C driver and the core APIs _only_, you have to select
425 individual components like LCD backlight, voltage regulators,
426 LEDs and battery-charger under the corresponding menus.
432 config MFD_DA9052_SPI
433 bool "Support Dialog Semiconductor DA9052/53 PMIC variants with SPI"
437 depends on SPI_MASTER=y
439 Support for the Dialog Semiconductor DA9052 PMIC
440 when controlled using SPI. This driver provides common support
441 for accessing the device, additional drivers must be enabled in
442 order to use the functionality of the device.
444 config MFD_DA9052_I2C
445 bool "Support Dialog Semiconductor DA9052/53 PMIC variants with I2C"
451 Support for the Dialog Semiconductor DA9052 PMIC
452 when controlled using I2C. This driver provides common support
453 for accessing the device, additional drivers must be enabled in
454 order to use the functionality of the device.
457 bool "Dialog Semiconductor DA9055 PMIC Support"
464 Say yes here for support of Dialog Semiconductor DA9055. This is
465 a Power Management IC. This driver provides common support for
466 accessing the device as well as the I2C interface to the chip itself.
467 Additional drivers must be enabled in order to use the functionality
470 This driver can be built as a module. If built as a module it will be
474 bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
477 Say yes here to add support for Analog Devices AD5520 and ADP5501,
478 Multifunction Power Management IC. This includes
479 the I2C driver and the core APIs _only_, you have to select
480 individual components like LCD backlight, LEDs, GPIOs and Kepad
481 under the corresponding menus.
484 bool "Texas Instruments LP8788 Power Management Unit Driver"
490 TI LP8788 PMU supports regulators, battery charger, RTC,
491 ADC, backlight driver and current sinks.
494 bool "Maxim Semiconductor MAX77686 PMIC Support"
495 depends on I2C=y && GENERIC_HARDIRQS
500 Say yes here to support for Maxim Semiconductor MAX77686.
501 This is a Power Management IC with RTC on chip.
502 This driver provides common support for accessing the device;
503 additional drivers must be enabled in order to use the functionality
507 bool "Maxim Semiconductor MAX77693 PMIC Support"
508 depends on I2C=y && GENERIC_HARDIRQS
512 Say yes here to support for Maxim Semiconductor MAX77693.
513 This is a companion Power Management IC with Flash, Haptic, Charger,
514 and MUIC(Micro USB Interface Controller) controls on chip.
515 This driver provides common support for accessing the device;
516 additional drivers must be enabled in order to use the functionality
520 tristate "Maxim Semiconductor MAX8907 PMIC Support"
522 depends on I2C=y && GENERIC_HARDIRQS
526 Say yes here to support for Maxim Semiconductor MAX8907. This is
527 a Power Management IC. This driver provides common support for
528 accessing the device; additional drivers must be enabled in order
529 to use the functionality of the device.
532 bool "Maxim Semiconductor MAX8925 PMIC Support"
533 depends on I2C=y && GENERIC_HARDIRQS
536 Say yes here to support for Maxim Semiconductor MAX8925. This is
537 a Power Management IC. This driver provides common support for
538 accessing the device, additional drivers must be enabled in order
539 to use the functionality of the device.
542 bool "Maxim Semiconductor MAX8997/8966 PMIC Support"
543 depends on I2C=y && GENERIC_HARDIRQS
547 Say yes here to support for Maxim Semiconductor MAX8997/8966.
548 This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic,
549 MUIC controls on chip.
550 This driver provides common support for accessing the device;
551 additional drivers must be enabled in order to use the functionality
555 bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support"
556 depends on I2C=y && GENERIC_HARDIRQS
559 Say yes here to support for Maxim Semiconductor MAX8998 and
560 National Semiconductor LP3974. This is a Power Management IC.
561 This driver provides common support for accessing the device,
562 additional drivers must be enabled in order to use the functionality
566 bool "SAMSUNG Electronics PMIC Series Support"
567 depends on I2C=y && GENERIC_HARDIRQS
572 Support for the Samsung Electronics MFD series.
573 This driver provides common support for accessing the device,
574 additional drivers must be enabled in order to use the functionality
583 config MFD_ARIZONA_I2C
584 tristate "Support Wolfson Microelectronics Arizona platform with I2C"
590 Support for the Wolfson Microelectronics Arizona platform audio SoC
591 core functionality controlled via I2C.
593 config MFD_ARIZONA_SPI
594 tristate "Support Wolfson Microelectronics Arizona platform with SPI"
598 depends on SPI_MASTER
600 Support for the Wolfson Microelectronics Arizona platform audio SoC
601 core functionality controlled via I2C.
604 bool "Support Wolfson Microelectronics WM5102"
605 depends on MFD_ARIZONA
607 Support for Wolfson Microelectronics WM5102 low power audio SoC
610 bool "Support Wolfson Microelectronics WM5110"
611 depends on MFD_ARIZONA
613 Support for Wolfson Microelectronics WM5110 low power audio SoC
616 bool "Support Wolfson Microelectronics WM8400"
621 Support for the Wolfson Microelecronics WM8400 PMIC and audio
622 CODEC. This driver provides common support for accessing
623 the device, additional drivers must be enabled in order to use
624 the functionality of the device.
628 depends on GENERIC_HARDIRQS
630 config MFD_WM831X_I2C
631 bool "Support Wolfson Microelectronics WM831x/2x PMICs with I2C"
636 depends on I2C=y && GENERIC_HARDIRQS
638 Support for the Wolfson Microelecronics WM831x and WM832x PMICs
639 when controlled using I2C. This driver provides common support
640 for accessing the device, additional drivers must be enabled in
641 order to use the functionality of the device.
643 config MFD_WM831X_SPI
644 bool "Support Wolfson Microelectronics WM831x/2x PMICs with SPI"
649 depends on SPI_MASTER && GENERIC_HARDIRQS
651 Support for the Wolfson Microelecronics WM831x and WM832x PMICs
652 when controlled using SPI. This driver provides common support
653 for accessing the device, additional drivers must be enabled in
654 order to use the functionality of the device.
658 depends on GENERIC_HARDIRQS
660 config MFD_WM8350_CONFIG_MODE_0
662 depends on MFD_WM8350
664 config MFD_WM8350_CONFIG_MODE_1
666 depends on MFD_WM8350
668 config MFD_WM8350_CONFIG_MODE_2
670 depends on MFD_WM8350
672 config MFD_WM8350_CONFIG_MODE_3
674 depends on MFD_WM8350
676 config MFD_WM8351_CONFIG_MODE_0
678 depends on MFD_WM8350
680 config MFD_WM8351_CONFIG_MODE_1
682 depends on MFD_WM8350
684 config MFD_WM8351_CONFIG_MODE_2
686 depends on MFD_WM8350
688 config MFD_WM8351_CONFIG_MODE_3
690 depends on MFD_WM8350
692 config MFD_WM8352_CONFIG_MODE_0
694 depends on MFD_WM8350
696 config MFD_WM8352_CONFIG_MODE_1
698 depends on MFD_WM8350
700 config MFD_WM8352_CONFIG_MODE_2
702 depends on MFD_WM8350
704 config MFD_WM8352_CONFIG_MODE_3
706 depends on MFD_WM8350
708 config MFD_WM8350_I2C
709 bool "Support Wolfson Microelectronics WM8350 with I2C"
711 depends on I2C=y && GENERIC_HARDIRQS
713 The WM8350 is an integrated audio and power management
714 subsystem with watchdog and RTC functionality for embedded
715 systems. This option enables core support for the WM8350 with
716 I2C as the control interface. Additional options must be
717 selected to enable support for the functionality of the chip.
720 bool "Support Wolfson Microelectronics WM8994"
724 depends on I2C=y && GENERIC_HARDIRQS
726 The WM8994 is a highly integrated hi-fi CODEC designed for
727 smartphone applicatiosn. As well as audio functionality it
728 has on board GPIO and regulator functionality which is
729 supported via the relevant subsystems. This driver provides
730 core support for the WM8994, in order to use the actual
731 functionaltiy of the device other drivers must be enabled.
734 tristate "Support for NXP PCF50633"
738 Say yes here if you have NXP PCF50633 chip on your board.
739 This core driver provides register access and IRQ handling
740 facilities, and registers devices for the various functions
741 so that function-specific drivers can bind to them.
744 tristate "Support for NXP PCF50633 ADC"
745 depends on MFD_PCF50633
747 Say yes here if you want to include support for ADC in the
751 tristate "Support for NXP PCF50633 GPIO"
752 depends on MFD_PCF50633
754 Say yes here if you want to include support GPIO for pins on
762 depends on SPI_MASTER || I2C
766 Enable support for the Freescale MC13783 and MC13892 PMICs.
767 This driver provides common support for accessing the device,
768 additional drivers must be enabled in order to use the
769 functionality of the device.
771 config MFD_MC13XXX_SPI
772 tristate "Freescale MC13783 and MC13892 SPI interface"
773 depends on SPI_MASTER
777 Select this if your MC13xxx is connected via an SPI bus.
779 config MFD_MC13XXX_I2C
780 tristate "Freescale MC13892 I2C interface"
785 Select this if your MC13xxx is connected via an I2C bus.
788 bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions"
789 default y if ARCH_U300 || ARCH_U8500
791 Say yes here if you have the ABX500 Mixed Signal IC family
792 chips. This core driver expose register access functions.
793 Functionality specific drivers using these functions can
794 remain unchanged when IC changes. Binding of the functions to
795 actual register access is done by the IC core driver.
798 bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
799 depends on I2C=y && ABX500_CORE
801 default y if ARCH_U300
803 Select this to enable the AB3100 Mixed Signal IC core
804 functionality. This connects to a AB3100 on the I2C bus
805 and expose a number of symbols needed for dependent devices
806 to read and write registers and subscribe to events from
807 this multi-functional IC. This is needed to use other features
808 of the AB3100 such as battery-backed RTC, charging control,
809 LEDs, vibrator, system power and temperature, power management
813 tristate "ST-Ericsson AB3100 OTP functions"
814 depends on AB3100_CORE
815 default y if AB3100_CORE
817 Select this to enable the AB3100 Mixed Signal IC OTP (one-time
818 programmable memory) support. This exposes a sysfs file to read
823 depends on GENERIC_HARDIRQS && SPI_MASTER
825 This enables the PCAP ASIC present on EZX Phones. This is
826 needed for MMC, TouchScreen, Sound, USB, etc..
829 bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
830 depends on GENERIC_HARDIRQS && ABX500_CORE && MFD_DB8500_PRCMU
834 Select this option to enable access to AB8500 power management
835 chip. This connects to U8500 either on the SSP/SPI bus (deprecated
836 since hardware version v1.0) or the I2C bus via PRCMU. It also adds
837 the irq_chip parts for handling the Mixed Signal chip events.
838 This chip embeds various other multimedia funtionalities as well.
841 bool "Enable debug info via debugfs"
842 depends on AB8500_CORE && DEBUG_FS
843 default y if DEBUG_FS
845 Select this option if you want debug information using the debug
849 bool "AB8500 GPADC driver"
850 depends on AB8500_CORE && REGULATOR_AB8500
853 AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage
855 config MFD_DB8500_PRCMU
856 bool "ST-Ericsson DB8500 Power Reset Control Management Unit"
857 depends on UX500_SOC_DB8500
860 Select this option to enable support for the DB8500 Power Reset
861 and Control Management Unit. This is basically an autonomous
862 system controller running an XP70 microprocessor, which is accessed
863 through a register map.
866 tristate "Support for CS5535 and CS5536 southbridge core functions"
868 depends on PCI && X86
870 This is the core driver for CS5535/CS5536 MFD functions. This is
871 necessary for using the board's GPIO and MFGPT functionality.
873 config MFD_TIMBERDALE
874 tristate "Support for the Timberdale FPGA"
876 depends on PCI && GPIOLIB
878 This is the core driver for the timberdale FPGA. This device is a
879 multifunction device which exposes numerous platform devices.
881 The timberdale FPGA can be found on the Intel Atom development board
882 for in-vehicle infontainment, called Russellville.
885 tristate "Intel SCH LPC"
889 LPC bridge function of the Intel SCH provides support for
890 System Management Bus and General Purpose I/O.
893 tristate "Intel ICH LPC"
897 The LPC bridge function of the Intel ICH provides support for
898 many functional units. This driver provides needed support for
899 other drivers to control these functions, currently GPIO and
903 tristate "Support for RDC-R321x southbridge"
907 Say yes here if you want to have support for the RDC R-321x SoC
908 southbridge which provides access to GPIOs and Watchdog using the
909 southbridge PCI device configuration space.
911 config MFD_JANZ_CMODIO
912 tristate "Support for Janz CMOD-IO PCI MODULbus Carrier Board"
916 This is the core driver for the Janz CMOD-IO PCI MODULbus
917 carrier board. This device is a PCI to MODULbus bridge which may
918 host many different types of MODULbus daughterboards, including
919 CAN and GPIO controllers.
921 config MFD_JZ4740_ADC
922 bool "Support for the JZ4740 SoC ADC core"
924 select GENERIC_IRQ_CHIP
925 depends on MACH_JZ4740
927 Say yes here if you want support for the ADC unit in the JZ4740 SoC.
928 This driver is necessary for jz4740-battery and jz4740-hwmon driver.
931 tristate "Support for VIA VX855/VX875 integrated south bridge"
935 Say yes here to enable support for various functions of the
936 VIA VX855/VX875 south bridge. You will need to enable the vx855_spi
937 and/or vx855_gpio drivers for this to do anything useful.
939 config MFD_WL1273_CORE
940 tristate "Support for TI WL1273 FM radio."
945 This is the core driver for the TI WL1273 FM radio. This MFD
946 driver connects the radio-wl1273 V4L2 module and the wl1273
949 config MFD_OMAP_USB_HOST
950 bool "Support OMAP USBHS core and TLL driver"
951 depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3
954 This is the core driver for the OAMP EHCI and OHCI drivers.
955 This MFD driver does the required setup functionalities for
956 OMAP USB Host drivers.
961 config MFD_PM8921_CORE
962 tristate "Qualcomm PM8921 PMIC chip"
967 If you say yes to this option, support will be included for the
968 built-in PM8921 PMIC chip.
970 This is required if your board has a PM8921 and uses its features,
971 such as: MPPs, GPIOs, regulators, interrupts, and PWM.
973 Say M here if you want to include support for PM8921 chip as a module.
974 This will build a module called "pm8921-core".
976 config MFD_PM8XXX_IRQ
977 bool "Support for Qualcomm PM8xxx IRQ features"
978 depends on MFD_PM8XXX
979 default y if MFD_PM8XXX
981 This is the IRQ driver for Qualcomm PM 8xxx PMIC chips.
983 This is required to use certain other PM 8xxx features, such as GPIO
986 config TPS65911_COMPARATOR
990 bool "TPS65090 Power Management chips"
991 depends on I2C=y && GENERIC_HARDIRQS
995 If you say yes here you get support for the TPS65090 series of
996 Power Management chips.
997 This driver provides common support for accessing the device,
998 additional drivers must be enabled in order to use the
999 functionality of the device.
1001 config MFD_AAT2870_CORE
1002 bool "Support for the AnalogicTech AAT2870"
1004 depends on I2C=y && GPIOLIB
1006 If you say yes here you get support for the AAT2870.
1007 This driver provides common support for accessing the device,
1008 additional drivers must be enabled in order to use the
1009 functionality of the device.
1011 config MFD_INTEL_MSIC
1012 bool "Support for Intel MSIC"
1013 depends on INTEL_SCU_IPC
1016 Select this option to enable access to Intel MSIC (Avatele
1017 Passage) chip. This chip embeds audio, battery, GPIO, etc.
1018 devices used in Intel Medfield platforms.
1021 bool "Ricoh RC5T583 Power Management system device"
1022 depends on I2C=y && GENERIC_HARDIRQS
1026 Select this option to get support for the RICOH583 Power
1027 Management system device.
1028 This driver provides common support for accessing the device
1029 through i2c interface. The device supports multiple sub-devices
1030 like GPIO, interrupts, RTC, LDO and DCDC regulators, onkey.
1031 Additional drivers must be enabled in order to use the
1032 different functionality of the device.
1035 bool "STA2X11 multi function device support"
1040 bool "System Controller Register R/W Based on Regmap"
1044 Select this option to enable accessing system control registers
1048 bool "Support for the TI Palmas series chips"
1054 If you say yes here you get support for the Palmas
1055 series of PMIC chips from Texas Instruments.
1060 menu "Multimedia Capabilities Port drivers"
1061 depends on ARCH_SA1100
1068 tristate "Support SA11x0 MCP interface"
1069 depends on ARCH_SA1100
1074 bool "Support for UCB1200 / UCB1300"
1075 depends on MCP_SA11X0
1078 config MCP_UCB1200_TS
1079 tristate "Touchscreen interface support"
1080 depends on MCP_UCB1200 && INPUT
1084 config VEXPRESS_CONFIG
1087 Platform configuration infrastructure for the ARM Ltd.