5 this file has configuration informations - card-specific stuff
6 like the big tvcards array for the most part
8 Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de)
9 & Marcus Metzler (mocm@thp.uni-koeln.de)
10 (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
12 This program is free software; you can redistribute it and/or modify
13 it under the terms of the GNU General Public License as published by
14 the Free Software Foundation; either version 2 of the License, or
15 (at your option) any later version.
17 This program is distributed in the hope that it will be useful,
18 but WITHOUT ANY WARRANTY; without even the implied warranty of
19 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 GNU General Public License for more details.
22 You should have received a copy of the GNU General Public License
23 along with this program; if not, write to the Free Software
24 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
28 #include <linux/delay.h>
29 #include <linux/module.h>
30 #include <linux/kmod.h>
31 #include <linux/init.h>
32 #include <linux/pci.h>
33 #include <linux/vmalloc.h>
34 #include <linux/firmware.h>
35 #include <net/checksum.h>
37 #include <asm/unaligned.h>
41 #include <media/v4l2-common.h>
42 #include <media/tvaudio.h>
43 #include "bttv-audio-hook.h"
46 static void boot_msp34xx(struct bttv *btv, int pin);
47 static void hauppauge_eeprom(struct bttv *btv);
48 static void avermedia_eeprom(struct bttv *btv);
49 static void osprey_eeprom(struct bttv *btv, const u8 ee[256]);
50 static void modtec_eeprom(struct bttv *btv);
51 static void init_PXC200(struct bttv *btv);
52 static void init_RTV24(struct bttv *btv);
54 static void rv605_muxsel(struct bttv *btv, unsigned int input);
55 static void eagle_muxsel(struct bttv *btv, unsigned int input);
56 static void xguard_muxsel(struct bttv *btv, unsigned int input);
57 static void ivc120_muxsel(struct bttv *btv, unsigned int input);
58 static void gvc1100_muxsel(struct bttv *btv, unsigned int input);
60 static void PXC200_muxsel(struct bttv *btv, unsigned int input);
62 static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input);
63 static void picolo_tetra_init(struct bttv *btv);
65 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input);
66 static void tibetCS16_init(struct bttv *btv);
68 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input);
69 static void kodicom4400r_init(struct bttv *btv);
71 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input);
72 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input);
74 static void geovision_muxsel(struct bttv *btv, unsigned int input);
76 static void phytec_muxsel(struct bttv *btv, unsigned int input);
78 static int terratec_active_radio_upgrade(struct bttv *btv);
79 static int tea5757_read(struct bttv *btv);
80 static int tea5757_write(struct bttv *btv, int value);
81 static void identify_by_eeprom(struct bttv *btv,
82 unsigned char eeprom_data[256]);
83 static int __devinit pvr_boot(struct bttv *btv);
85 /* config variables */
86 static unsigned int triton1;
87 static unsigned int vsfx;
88 static unsigned int latency = UNSET;
91 static unsigned int card[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
92 static unsigned int pll[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
93 static unsigned int tuner[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
94 static unsigned int svhs[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
95 static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
96 static struct bttv *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL };
98 static unsigned int autoload = 1;
100 static unsigned int autoload;
102 static unsigned int gpiomask = UNSET;
103 static unsigned int audioall = UNSET;
104 static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
107 module_param(triton1, int, 0444);
108 module_param(vsfx, int, 0444);
109 module_param(no_overlay, int, 0444);
110 module_param(latency, int, 0444);
111 module_param(gpiomask, int, 0444);
112 module_param(audioall, int, 0444);
113 module_param(autoload, int, 0444);
115 module_param_array(card, int, NULL, 0444);
116 module_param_array(pll, int, NULL, 0444);
117 module_param_array(tuner, int, NULL, 0444);
118 module_param_array(svhs, int, NULL, 0444);
119 module_param_array(remote, int, NULL, 0444);
120 module_param_array(audiomux, int, NULL, 0444);
122 MODULE_PARM_DESC(triton1,"set ETBF pci config bit "
123 "[enable bug compatibility for triton1 + others]");
124 MODULE_PARM_DESC(vsfx,"set VSFX pci config bit "
125 "[yet another chipset flaw workaround]");
126 MODULE_PARM_DESC(latency,"pci latency timer");
127 MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
128 MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)");
129 MODULE_PARM_DESC(tuner,"specify installed tuner type");
130 MODULE_PARM_DESC(autoload,"automatically load i2c modules like tuner.o, default is 1 (yes)");
131 MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)"
132 " [some VIA/SIS chipsets are known to have problem with overlay]");
134 /* ----------------------------------------------------------------------- */
135 /* list of card IDs for bt878+ cards */
141 } cards[] __devinitdata = {
142 { 0x13eb0070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV" },
143 { 0x39000070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV-D" },
144 { 0x45000070, BTTV_BOARD_HAUPPAUGEPVR, "Hauppauge WinTV/PVR" },
145 { 0xff000070, BTTV_BOARD_OSPREY1x0, "Osprey-100" },
146 { 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" },
147 { 0xff020070, BTTV_BOARD_OSPREY500, "Osprey-500" },
148 { 0xff030070, BTTV_BOARD_OSPREY2000, "Osprey-2000" },
149 { 0xff040070, BTTV_BOARD_OSPREY540, "Osprey-540" },
150 { 0xff070070, BTTV_BOARD_OSPREY440, "Osprey-440" },
152 { 0x00011002, BTTV_BOARD_ATI_TVWONDER, "ATI TV Wonder" },
153 { 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" },
155 { 0x6606107d, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
156 { 0x6607107d, BTTV_BOARD_WINFASTVC100, "Leadtek WinFast VC 100" },
157 { 0x6609107d, BTTV_BOARD_WINFAST2000, "Leadtek TV 2000 XP" },
158 { 0x263610b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
159 { 0x264510b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
160 { 0x402010fc, BTTV_BOARD_GVBCTV3PCI, "I-O Data Co. GV-BCTV3/PCI" },
161 { 0x405010fc, BTTV_BOARD_GVBCTV4PCI, "I-O Data Co. GV-BCTV4/PCI" },
162 { 0x407010fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
163 { 0xd01810fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
165 { 0x001211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" },
166 /* some cards ship with byteswapped IDs ... */
167 { 0x1200bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" },
168 { 0xff00bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" },
169 /* this seems to happen as well ... */
170 { 0xff1211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" },
172 { 0x3000121a, BTTV_BOARD_VOODOOTV_200, "3Dfx VoodooTV 200" },
173 { 0x263710b4, BTTV_BOARD_VOODOOTV_FM, "3Dfx VoodooTV FM" },
174 { 0x3060121a, BTTV_BOARD_STB2, "3Dfx VoodooTV 100/ STB OEM" },
176 { 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
177 { 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" },
178 { 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
179 { 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
180 { 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" },
181 { 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" },
182 { 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS, "Phoebe TV Master (CPH060)" },
184 { 0x00011461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" },
185 { 0x00021461, BTTV_BOARD_AVERMEDIA98, "AVermedia TVCapture 98" },
186 { 0x00031461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" },
187 { 0x00041461, BTTV_BOARD_AVERMEDIA98, "AVerMedia TVCapture 98" },
188 { 0x03001461, BTTV_BOARD_AVERMEDIA98, "VDOMATE TV TUNER CARD" },
190 { 0x1117153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL B/G)" },
191 { 0x1118153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL B/G)" },
192 { 0x1119153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL I)" },
193 { 0x111a153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL I)" },
195 { 0x1123153b, BTTV_BOARD_TERRATVRADIO, "Terratec TV Radio+" },
196 { 0x1127153b, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.05)" },
197 /* clashes with FlyVideo
198 *{ 0x18521852, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.10)" }, */
199 { 0x1134153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (LR102)" },
200 { 0x1135153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* LR102 */
201 { 0x5018153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue" }, /* ?? */
202 { 0xff3b153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* ?? */
204 { 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
205 { 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
206 { 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
207 { 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
208 { 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
210 { 0x1430aa00, BTTV_BOARD_PV143, "Provideo PV143A" },
211 { 0x1431aa00, BTTV_BOARD_PV143, "Provideo PV143B" },
212 { 0x1432aa00, BTTV_BOARD_PV143, "Provideo PV143C" },
213 { 0x1433aa00, BTTV_BOARD_PV143, "Provideo PV143D" },
214 { 0x1433aa03, BTTV_BOARD_PV143, "Security Eyes" },
216 { 0x1460aa00, BTTV_BOARD_PV150, "Provideo PV150A-1" },
217 { 0x1461aa01, BTTV_BOARD_PV150, "Provideo PV150A-2" },
218 { 0x1462aa02, BTTV_BOARD_PV150, "Provideo PV150A-3" },
219 { 0x1463aa03, BTTV_BOARD_PV150, "Provideo PV150A-4" },
221 { 0x1464aa04, BTTV_BOARD_PV150, "Provideo PV150B-1" },
222 { 0x1465aa05, BTTV_BOARD_PV150, "Provideo PV150B-2" },
223 { 0x1466aa06, BTTV_BOARD_PV150, "Provideo PV150B-3" },
224 { 0x1467aa07, BTTV_BOARD_PV150, "Provideo PV150B-4" },
226 { 0xa132ff00, BTTV_BOARD_IVC100, "IVC-100" },
227 { 0xa1550000, BTTV_BOARD_IVC200, "IVC-200" },
228 { 0xa1550001, BTTV_BOARD_IVC200, "IVC-200" },
229 { 0xa1550002, BTTV_BOARD_IVC200, "IVC-200" },
230 { 0xa1550003, BTTV_BOARD_IVC200, "IVC-200" },
231 { 0xa1550100, BTTV_BOARD_IVC200, "IVC-200G" },
232 { 0xa1550101, BTTV_BOARD_IVC200, "IVC-200G" },
233 { 0xa1550102, BTTV_BOARD_IVC200, "IVC-200G" },
234 { 0xa1550103, BTTV_BOARD_IVC200, "IVC-200G" },
235 { 0xa182ff00, BTTV_BOARD_IVC120, "IVC-120G" },
236 { 0xa182ff01, BTTV_BOARD_IVC120, "IVC-120G" },
237 { 0xa182ff02, BTTV_BOARD_IVC120, "IVC-120G" },
238 { 0xa182ff03, BTTV_BOARD_IVC120, "IVC-120G" },
239 { 0xa182ff04, BTTV_BOARD_IVC120, "IVC-120G" },
240 { 0xa182ff05, BTTV_BOARD_IVC120, "IVC-120G" },
241 { 0xa182ff06, BTTV_BOARD_IVC120, "IVC-120G" },
242 { 0xa182ff07, BTTV_BOARD_IVC120, "IVC-120G" },
243 { 0xa182ff08, BTTV_BOARD_IVC120, "IVC-120G" },
244 { 0xa182ff09, BTTV_BOARD_IVC120, "IVC-120G" },
245 { 0xa182ff0a, BTTV_BOARD_IVC120, "IVC-120G" },
246 { 0xa182ff0b, BTTV_BOARD_IVC120, "IVC-120G" },
247 { 0xa182ff0c, BTTV_BOARD_IVC120, "IVC-120G" },
248 { 0xa182ff0d, BTTV_BOARD_IVC120, "IVC-120G" },
249 { 0xa182ff0e, BTTV_BOARD_IVC120, "IVC-120G" },
250 { 0xa182ff0f, BTTV_BOARD_IVC120, "IVC-120G" },
251 { 0xf0500000, BTTV_BOARD_IVCE8784, "IVCE-8784" },
252 { 0xf0500001, BTTV_BOARD_IVCE8784, "IVCE-8784" },
253 { 0xf0500002, BTTV_BOARD_IVCE8784, "IVCE-8784" },
254 { 0xf0500003, BTTV_BOARD_IVCE8784, "IVCE-8784" },
256 { 0x41424344, BTTV_BOARD_GRANDTEC, "GrandTec Multi Capture" },
257 { 0x01020304, BTTV_BOARD_XGUARD, "Grandtec Grand X-Guard" },
259 { 0x18501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
260 { 0xa0501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
261 { 0x18511851, BTTV_BOARD_FLYVIDEO98EZ, "FlyVideo 98EZ (LR51)/ CyberMail AV" },
262 { 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
263 { 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" },
264 { 0x18501f7f, BTTV_BOARD_FLYVIDEO_98, "Lifeview Flyvideo 98" },
266 { 0x010115cb, BTTV_BOARD_GMV1, "AG GMV1" },
267 { 0x010114c7, BTTV_BOARD_MODTEC_205, "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
269 { 0x10b42636, BTTV_BOARD_HAUPPAUGE878, "STB ???" },
270 { 0x217d6606, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
271 { 0xfff6f6ff, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
272 { 0x03116000, BTTV_BOARD_SENSORAY311, "Sensoray 311" },
273 { 0x00790e11, BTTV_BOARD_WINDVR, "Canopus WinDVR PCI" },
274 { 0xa0fca1a0, BTTV_BOARD_ZOLTRIX, "Face to Face Tvmax" },
275 { 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" },
276 { 0x146caa0c, BTTV_BOARD_PV951, "ituner spectra8" },
277 { 0x200a1295, BTTV_BOARD_PXC200, "ImageNation PXC200A" },
279 { 0x40111554, BTTV_BOARD_PV_BT878P_9B, "Prolink Pixelview PV-BT" },
280 { 0x17de0a01, BTTV_BOARD_KWORLD, "Mecer TV/FM/Video Tuner" },
282 { 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" },
283 { 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" },
284 { 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" },
285 { 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" },
287 { 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" },
289 { 0x53534149, BTTV_BOARD_SSAI_SECURITY, "SSAI Security Video Interface" },
290 { 0x5353414a, BTTV_BOARD_SSAI_ULTRASOUND, "SSAI Ultrasound Video Interface" },
292 /* likely broken, vendor id doesn't match the other magic views ...
293 * { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */
295 /* Duplicate PCI ID, reconfigure for this board during the eeprom read.
296 * { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB, "Hauppauge ImpactVCB" }, */
298 /* DVB cards (using pci function .1 for mpeg data xfer) */
299 { 0x001c11bd, BTTV_BOARD_PINNACLESAT, "Pinnacle PCTV Sat" },
300 { 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
301 { 0x20007063, BTTV_BOARD_PC_HDTV, "pcHDTV HD-2000 TV"},
302 { 0x002611bd, BTTV_BOARD_TWINHAN_DST, "Pinnacle PCTV SAT CI" },
303 { 0x00011822, BTTV_BOARD_TWINHAN_DST, "Twinhan VisionPlus DVB" },
304 { 0xfc00270f, BTTV_BOARD_TWINHAN_DST, "ChainTech digitop DST-1000 DVB-S" },
305 { 0x07711461, BTTV_BOARD_AVDVBT_771, "AVermedia AverTV DVB-T 771" },
306 { 0x07611461, BTTV_BOARD_AVDVBT_761, "AverMedia AverTV DVB-T 761" },
307 { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE, "DViCO FusionHDTV DVB-T Lite" },
308 { 0xdb1118ac, BTTV_BOARD_DVICO_DVBT_LITE, "Ultraview DVB-T Lite" },
309 { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE, "DViCO FusionHDTV 5 Lite" },
310 { 0x00261822, BTTV_BOARD_TWINHAN_DST, "DNTV Live! Mini "},
311 { 0xd200dbc0, BTTV_BOARD_DVICO_FUSIONHDTV_2, "DViCO FusionHDTV 2" },
312 { 0x763c008a, BTTV_BOARD_GEOVISION_GV600, "GeoVision GV-600" },
313 { 0x18011000, BTTV_BOARD_ENLTV_FM_2, "Encore ENL TV-FM-2" },
317 /* ----------------------------------------------------------------------- */
318 /* array with description for bt848 / bt878 tv/grabber cards */
320 struct tvcard bttv_tvcards[] = {
321 /* ---- card 0x00 ---------------------------------- */
322 [BTTV_BOARD_UNKNOWN] = {
323 .name = " *** UNKNOWN/GENERIC *** ",
326 .muxsel = MUXSEL(2, 3, 1, 0),
328 .tuner_addr = ADDR_UNSET,
330 [BTTV_BOARD_MIRO] = {
333 /* .audio_inputs= 1, */
336 .muxsel = MUXSEL(2, 3, 1, 1),
337 .gpiomux = { 2, 0, 0, 0 },
341 .tuner_addr = ADDR_UNSET,
343 [BTTV_BOARD_HAUPPAUGE] = {
344 .name = "Hauppauge (bt848)",
346 /* .audio_inputs= 1, */
349 .muxsel = MUXSEL(2, 3, 1, 1),
350 .gpiomux = { 0, 1, 2, 3 },
354 .tuner_addr = ADDR_UNSET,
357 .name = "STB, Gateway P/N 6000699 (bt848)",
359 /* .audio_inputs= 1, */
362 .muxsel = MUXSEL(2, 3, 1, 1),
363 .gpiomux = { 4, 0, 2, 3 },
367 .tuner_type = TUNER_PHILIPS_NTSC,
368 .tuner_addr = ADDR_UNSET,
373 /* ---- card 0x04 ---------------------------------- */
374 [BTTV_BOARD_INTEL] = {
375 .name = "Intel Create and Share PCI/ Smart Video Recorder III",
377 /* .audio_inputs= 0, */
380 .muxsel = MUXSEL(2, 3, 1, 1),
383 .tuner_type = TUNER_ABSENT,
384 .tuner_addr = ADDR_UNSET,
386 [BTTV_BOARD_DIAMOND] = {
387 .name = "Diamond DTV2000",
389 /* .audio_inputs= 1, */
392 .muxsel = MUXSEL(2, 3, 1, 0),
393 .gpiomux = { 0, 1, 0, 1 },
397 .tuner_addr = ADDR_UNSET,
399 [BTTV_BOARD_AVERMEDIA] = {
400 .name = "AVerMedia TVPhone",
402 /* .audio_inputs= 1, */
404 .muxsel = MUXSEL(2, 3, 1, 1),
406 .gpiomux = { 0x0c, 0x04, 0x08, 0x04 },
407 /* 0x04 for some cards ?? */
410 .tuner_addr = ADDR_UNSET,
411 .audio_mode_gpio= avermedia_tvphone_audio,
414 [BTTV_BOARD_MATRIX_VISION] = {
415 .name = "MATRIX-Vision MV-Delta",
417 /* .audio_inputs= 1, */
420 .muxsel = MUXSEL(2, 3, 1, 0, 0),
423 .tuner_type = TUNER_ABSENT,
424 .tuner_addr = ADDR_UNSET,
427 /* ---- card 0x08 ---------------------------------- */
428 [BTTV_BOARD_FLYVIDEO] = {
429 .name = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
431 /* .audio_inputs= 1, */
434 .muxsel = MUXSEL(2, 3, 1, 1),
435 .gpiomux = { 0, 0xc00, 0x800, 0x400 },
440 .tuner_addr = ADDR_UNSET,
442 [BTTV_BOARD_TURBOTV] = {
443 .name = "IMS/IXmicro TurboTV",
445 /* .audio_inputs= 1, */
448 .muxsel = MUXSEL(2, 3, 1, 1),
449 .gpiomux = { 1, 1, 2, 3 },
452 .tuner_type = TUNER_TEMIC_PAL,
453 .tuner_addr = ADDR_UNSET,
455 [BTTV_BOARD_HAUPPAUGE878] = {
456 .name = "Hauppauge (bt878)",
458 /* .audio_inputs= 1, */
460 .gpiomask = 0x0f, /* old: 7 */
461 .muxsel = MUXSEL(2, 0, 1, 1),
462 .gpiomux = { 0, 1, 2, 3 },
467 .tuner_addr = ADDR_UNSET,
469 [BTTV_BOARD_MIROPRO] = {
470 .name = "MIRO PCTV pro",
472 /* .audio_inputs= 1, */
475 .muxsel = MUXSEL(2, 3, 1, 1),
476 .gpiomux = { 0x20001,0x10001, 0, 0 },
480 .tuner_addr = ADDR_UNSET,
483 /* ---- card 0x0c ---------------------------------- */
484 [BTTV_BOARD_ADSTECH_TV] = {
485 .name = "ADS Technologies Channel Surfer TV (bt848)",
487 /* .audio_inputs= 1, */
490 .muxsel = MUXSEL(2, 3, 1, 1),
491 .gpiomux = { 13, 14, 11, 7 },
494 .tuner_addr = ADDR_UNSET,
496 [BTTV_BOARD_AVERMEDIA98] = {
497 .name = "AVerMedia TVCapture 98",
499 /* .audio_inputs= 4, */
502 .muxsel = MUXSEL(2, 3, 1, 1),
503 .gpiomux = { 13, 14, 11, 7 },
507 .tuner_type = TUNER_PHILIPS_PAL,
508 .tuner_addr = ADDR_UNSET,
509 .audio_mode_gpio= avermedia_tv_stereo_audio,
513 .name = "Aimslab Video Highway Xtreme (VHX)",
515 /* .audio_inputs= 1, */
518 .muxsel = MUXSEL(2, 3, 1, 1),
519 .gpiomux = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */
524 .tuner_addr = ADDR_UNSET,
526 [BTTV_BOARD_ZOLTRIX] = {
527 .name = "Zoltrix TV-Max",
529 /* .audio_inputs= 1, */
532 .muxsel = MUXSEL(2, 3, 1, 1),
533 .gpiomux = { 0, 0, 1, 0 },
537 .tuner_addr = ADDR_UNSET,
540 /* ---- card 0x10 ---------------------------------- */
541 [BTTV_BOARD_PIXVIEWPLAYTV] = {
542 .name = "Prolink Pixelview PlayTV (bt878)",
544 /* .audio_inputs= 1, */
546 .gpiomask = 0x01fe00,
547 .muxsel = MUXSEL(2, 3, 1, 1),
548 /* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
549 .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 },
550 .gpiomute = 0x002000,
554 .tuner_addr = ADDR_UNSET,
556 [BTTV_BOARD_WINVIEW_601] = {
557 .name = "Leadtek WinView 601",
559 /* .audio_inputs= 1, */
561 .gpiomask = 0x8300f8,
562 .muxsel = MUXSEL(2, 3, 1, 1, 0),
563 .gpiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 },
564 .gpiomute = 0xcfa007,
567 .tuner_addr = ADDR_UNSET,
568 .volume_gpio = winview_volume,
571 [BTTV_BOARD_AVEC_INTERCAP] = {
572 .name = "AVEC Intercapture",
574 /* .audio_inputs= 2, */
577 .muxsel = MUXSEL(2, 3, 1, 1),
578 .gpiomux = { 1, 0, 0, 0 },
581 .tuner_addr = ADDR_UNSET,
583 [BTTV_BOARD_LIFE_FLYKIT] = {
584 .name = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
586 /* .audio_inputs= 1, */
588 .gpiomask = 0x8dff00,
589 .muxsel = MUXSEL(2, 3, 1, 1),
592 .tuner_type = TUNER_ABSENT,
593 .tuner_addr = ADDR_UNSET,
596 /* ---- card 0x14 ---------------------------------- */
597 [BTTV_BOARD_CEI_RAFFLES] = {
598 .name = "CEI Raffles Card",
600 /* .audio_inputs= 3, */
602 .muxsel = MUXSEL(2, 3, 1, 1),
604 .tuner_addr = ADDR_UNSET,
606 [BTTV_BOARD_CONFERENCETV] = {
607 .name = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
609 /* .audio_inputs= 2, tuner, line in */
612 .muxsel = MUXSEL(2, 3, 1, 1),
613 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
616 .tuner_type = TUNER_PHILIPS_PAL_I,
617 .tuner_addr = ADDR_UNSET,
619 [BTTV_BOARD_PHOEBE_TVMAS] = {
620 .name = "Askey CPH050/ Phoebe Tv Master + FM",
622 /* .audio_inputs= 1, */
625 .muxsel = MUXSEL(2, 3, 1, 1),
626 .gpiomux = { 0, 1, 0x800, 0x400 },
631 .tuner_addr = ADDR_UNSET,
633 [BTTV_BOARD_MODTEC_205] = {
634 .name = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
636 /* .audio_inputs= 1, */
640 .muxsel = MUXSEL(2, 3, 0), /* input 2 is digital */
641 /* .digital_mode= DIGITAL_MODE_CAMERA, */
642 .gpiomux = { 0, 0, 0, 0 },
645 .tuner_type = TUNER_ALPS_TSBB5_PAL_I,
646 .tuner_addr = ADDR_UNSET,
649 /* ---- card 0x18 ---------------------------------- */
650 [BTTV_BOARD_MAGICTVIEW061] = {
651 .name = "Askey CPH05X/06X (bt878) [many vendors]",
653 /* .audio_inputs= 1, */
656 .muxsel = MUXSEL(2, 3, 1, 1),
657 .gpiomux = {0x400, 0x400, 0x400, 0x400 },
662 .tuner_addr = ADDR_UNSET,
665 [BTTV_BOARD_VOBIS_BOOSTAR] = {
666 .name = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
668 /* .audio_inputs= 1, */
670 .gpiomask = 0x1f0fff,
671 .muxsel = MUXSEL(2, 3, 1, 1),
672 .gpiomux = { 0x20000, 0x30000, 0x10000, 0 },
675 .tuner_type = TUNER_PHILIPS_PAL,
676 .tuner_addr = ADDR_UNSET,
677 .audio_mode_gpio= terratv_audio,
679 [BTTV_BOARD_HAUPPAUG_WCAM] = {
680 .name = "Hauppauge WinCam newer (bt878)",
682 /* .audio_inputs= 1, */
685 .muxsel = MUXSEL(2, 0, 1, 1),
686 .gpiomux = { 0, 1, 2, 3 },
690 .tuner_addr = ADDR_UNSET,
692 [BTTV_BOARD_MAXI] = {
693 .name = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
695 /* .audio_inputs= 2, */
698 .muxsel = MUXSEL(2, 3, 1, 1),
699 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
702 .tuner_type = TUNER_PHILIPS_SECAM,
703 .tuner_addr = ADDR_UNSET,
706 /* ---- card 0x1c ---------------------------------- */
707 [BTTV_BOARD_TERRATV] = {
708 .name = "Terratec TerraTV+ Version 1.1 (bt878)",
710 /* .audio_inputs= 1, */
712 .gpiomask = 0x1f0fff,
713 .muxsel = MUXSEL(2, 3, 1, 1),
714 .gpiomux = { 0x20000, 0x30000, 0x10000, 0x00000 },
717 .tuner_type = TUNER_PHILIPS_PAL,
718 .tuner_addr = ADDR_UNSET,
719 .audio_mode_gpio= terratv_audio,
721 External 20 pin connector (for Active Radio Upgrade board)
727 gpio05: om5610-stereo
731 gpio09+10: nIOR, nSEL ?? (bt878)
735 gpio16: u2-A0 (1st 4052bt)
738 gpio19: u4-A0 (2nd 4052)
742 00000 : Cdrom (internal audio input)
743 10000 : ext. Video audio input
752 [BTTV_BOARD_PXC200] = {
753 /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
754 .name = "Imagenation PXC200",
756 /* .audio_inputs= 1, */
757 .svhs = 1, /* was: 4 */
759 .muxsel = MUXSEL(2, 3, 1, 0, 0),
762 .tuner_type = TUNER_ABSENT,
763 .tuner_addr = ADDR_UNSET,
764 .muxsel_hook = PXC200_muxsel,
767 [BTTV_BOARD_FLYVIDEO_98] = {
768 .name = "Lifeview FlyVideo 98 LR50",
770 /* .audio_inputs= 1, */
772 .gpiomask = 0x1800, /* 0x8dfe00 */
773 .muxsel = MUXSEL(2, 3, 1, 1),
774 .gpiomux = { 0, 0x0800, 0x1000, 0x1000 },
778 .tuner_addr = ADDR_UNSET,
780 [BTTV_BOARD_IPROTV] = {
781 .name = "Formac iProTV, Formac ProTV I (bt848)",
783 /* .audio_inputs= 1, */
786 .muxsel = MUXSEL(2, 3, 1, 1),
787 .gpiomux = { 1, 0, 0, 0 },
789 .tuner_type = TUNER_PHILIPS_PAL,
790 .tuner_addr = ADDR_UNSET,
793 /* ---- card 0x20 ---------------------------------- */
794 [BTTV_BOARD_INTEL_C_S_PCI] = {
795 .name = "Intel Create and Share PCI/ Smart Video Recorder III",
797 /* .audio_inputs= 0, */
800 .muxsel = MUXSEL(2, 3, 1, 1),
803 .tuner_type = TUNER_ABSENT,
804 .tuner_addr = ADDR_UNSET,
806 [BTTV_BOARD_TERRATVALUE] = {
807 .name = "Terratec TerraTValue Version Bt878",
809 /* .audio_inputs= 1, */
811 .gpiomask = 0xffff00,
812 .muxsel = MUXSEL(2, 3, 1, 1),
813 .gpiomux = { 0x500, 0, 0x300, 0x900 },
817 .tuner_type = TUNER_PHILIPS_PAL,
818 .tuner_addr = ADDR_UNSET,
820 [BTTV_BOARD_WINFAST2000] = {
821 .name = "Leadtek WinFast 2000/ WinFast 2000 XP",
823 /* .audio_inputs= 1, */
825 /* TV, CVid, SVid, CVid over SVid connector */
826 .muxsel = MUXSEL(2, 3, 1, 1, 0),
827 /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
828 .gpiomask = 0xb33000,
829 .gpiomux = { 0x122000,0x1000,0x0000,0x620000 },
830 .gpiomute = 0x800000,
831 /* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
832 gpio23 -- hef4052:nEnable (0x800000)
835 0x0000: external audio
839 Note: There exists another variant "Winfast 2000" with tv stereo !?
840 Note: eeprom only contains FF and pci subsystem id 107d:6606
845 .tuner_type = TUNER_PHILIPS_PAL, /* default for now, gpio reads BFFF06 for Pal bg+dk */
846 .tuner_addr = ADDR_UNSET,
847 .audio_mode_gpio= winfast2000_audio,
850 [BTTV_BOARD_CHRONOS_VS2] = {
851 .name = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
853 /* .audio_inputs= 3, */
856 .muxsel = MUXSEL(2, 3, 1, 1),
857 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
861 .tuner_addr = ADDR_UNSET,
864 /* ---- card 0x24 ---------------------------------- */
865 [BTTV_BOARD_TYPHOON_TVIEW] = {
866 .name = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
868 /* .audio_inputs= 3, */
871 .muxsel = MUXSEL(2, 3, 1, 1),
872 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
876 .tuner_addr = ADDR_UNSET,
879 [BTTV_BOARD_PXELVWPLTVPRO] = {
880 .name = "Prolink PixelView PlayTV pro",
882 /* .audio_inputs= 1, */
885 .muxsel = MUXSEL(2, 3, 1, 1),
886 .gpiomux = { 0x21, 0x20, 0x24, 0x2c },
891 .tuner_addr = ADDR_UNSET,
893 [BTTV_BOARD_MAGICTVIEW063] = {
894 .name = "Askey CPH06X TView99",
896 /* .audio_inputs= 1, */
898 .gpiomask = 0x551e00,
899 .muxsel = MUXSEL(2, 3, 1, 0),
900 .gpiomux = { 0x551400, 0x551200, 0, 0 },
901 .gpiomute = 0x551c00,
904 .tuner_type = TUNER_PHILIPS_PAL_I,
905 .tuner_addr = ADDR_UNSET,
908 [BTTV_BOARD_PINNACLE] = {
909 .name = "Pinnacle PCTV Studio/Rave",
911 /* .audio_inputs= 1, */
913 .gpiomask = 0x03000F,
914 .muxsel = MUXSEL(2, 3, 1, 1),
915 .gpiomux = { 2, 0xd0001, 0, 0 },
920 .tuner_addr = ADDR_UNSET,
923 /* ---- card 0x28 ---------------------------------- */
924 [BTTV_BOARD_STB2] = {
925 .name = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
927 /* .audio_inputs= 1, */
930 .muxsel = MUXSEL(2, 3, 1, 1),
931 .gpiomux = { 4, 0, 2, 3 },
935 .tuner_type = TUNER_PHILIPS_NTSC,
936 .tuner_addr = ADDR_UNSET,
940 [BTTV_BOARD_AVPHONE98] = {
941 .name = "AVerMedia TVPhone 98",
943 /* .audio_inputs= 4, */
946 .muxsel = MUXSEL(2, 3, 1, 1),
947 .gpiomux = { 13, 4, 11, 7 },
951 .tuner_addr = ADDR_UNSET,
953 .audio_mode_gpio= avermedia_tvphone_audio,
955 [BTTV_BOARD_PV951] = {
956 .name = "ProVideo PV951", /* pic16c54 */
958 /* .audio_inputs= 1, */
961 .muxsel = MUXSEL(2, 3, 1, 1),
962 .gpiomux = { 0, 0, 0, 0},
966 .tuner_type = TUNER_PHILIPS_PAL_I,
967 .tuner_addr = ADDR_UNSET,
969 [BTTV_BOARD_ONAIR_TV] = {
970 .name = "Little OnAir TV",
972 /* .audio_inputs= 1, */
975 .muxsel = MUXSEL(2, 3, 1, 1),
976 .gpiomux = { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 },
977 .gpiomute = 0xff3ffc,
980 .tuner_addr = ADDR_UNSET,
983 /* ---- card 0x2c ---------------------------------- */
984 [BTTV_BOARD_SIGMA_TVII_FM] = {
985 .name = "Sigma TVII-FM",
987 /* .audio_inputs= 1, */
990 .muxsel = MUXSEL(2, 3, 1, 1),
991 .gpiomux = { 1, 1, 0, 2 },
996 .tuner_addr = ADDR_UNSET,
998 [BTTV_BOARD_MATRIX_VISION2] = {
999 .name = "MATRIX-Vision MV-Delta 2",
1001 /* .audio_inputs= 1, */
1004 .muxsel = MUXSEL(2, 3, 1, 0, 0),
1008 .tuner_type = TUNER_ABSENT,
1009 .tuner_addr = ADDR_UNSET,
1011 [BTTV_BOARD_ZOLTRIX_GENIE] = {
1012 .name = "Zoltrix Genie TV/FM",
1014 /* .audio_inputs= 1, */
1016 .gpiomask = 0xbcf03f,
1017 .muxsel = MUXSEL(2, 3, 1, 1),
1018 .gpiomux = { 0xbc803f, 0xbc903f, 0xbcb03f, 0 },
1019 .gpiomute = 0xbcb03f,
1022 .tuner_type = TUNER_TEMIC_4039FR5_NTSC,
1023 .tuner_addr = ADDR_UNSET,
1025 [BTTV_BOARD_TERRATVRADIO] = {
1026 .name = "Terratec TV/Radio+",
1028 /* .audio_inputs= 1, */
1030 .gpiomask = 0x70000,
1031 .muxsel = MUXSEL(2, 3, 1, 1),
1032 .gpiomux = { 0x20000, 0x30000, 0x10000, 0 },
1033 .gpiomute = 0x40000,
1037 .tuner_type = TUNER_PHILIPS_PAL_I,
1038 .tuner_addr = ADDR_UNSET,
1042 /* ---- card 0x30 ---------------------------------- */
1043 [BTTV_BOARD_DYNALINK] = {
1044 .name = "Askey CPH03x/ Dynalink Magic TView",
1046 /* .audio_inputs= 1, */
1049 .muxsel = MUXSEL(2, 3, 1, 1),
1050 .gpiomux = {2,0,0,0 },
1054 .tuner_type = UNSET,
1055 .tuner_addr = ADDR_UNSET,
1057 [BTTV_BOARD_GVBCTV3PCI] = {
1058 .name = "IODATA GV-BCTV3/PCI",
1060 /* .audio_inputs= 1, */
1062 .gpiomask = 0x010f00,
1063 .muxsel = MUXSEL(2, 3, 0, 0),
1064 .gpiomux = {0x10000, 0, 0x10000, 0 },
1067 .tuner_type = TUNER_ALPS_TSHC6_NTSC,
1068 .tuner_addr = ADDR_UNSET,
1069 .audio_mode_gpio= gvbctv3pci_audio,
1071 [BTTV_BOARD_PXELVWPLTVPAK] = {
1072 .name = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
1074 /* .audio_inputs= 1, */
1077 .gpiomask = 0xAA0000,
1078 .muxsel = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
1079 /* .digital_mode= DIGITAL_MODE_CAMERA, */
1080 .gpiomux = { 0x20000, 0, 0x80000, 0x80000 },
1081 .gpiomute = 0xa8000,
1084 .tuner_type = TUNER_PHILIPS_PAL_I,
1085 .tuner_addr = ADDR_UNSET,
1087 /* GPIO wiring: (different from Rev.4C !)
1088 GPIO17: U4.A0 (first hef4052bt)
1090 GPIO20: U5.A1 (second hef4052bt)
1092 GPIO22: BT832 Reset Line
1093 GPIO23: A5,A0, U5,nEN
1094 Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
1097 [BTTV_BOARD_EAGLE] = {
1098 .name = "Eagle Wireless Capricorn2 (bt878A)",
1100 /* .audio_inputs= 1, */
1103 .muxsel = MUXSEL(2, 0, 1, 1),
1104 .gpiomux = { 0, 1, 2, 3 },
1107 .tuner_type = UNSET /* TUNER_ALPS_TMDH2_NTSC */,
1108 .tuner_addr = ADDR_UNSET,
1111 /* ---- card 0x34 ---------------------------------- */
1112 [BTTV_BOARD_PINNACLEPRO] = {
1113 /* David Härdeman <david@2gen.com> */
1114 .name = "Pinnacle PCTV Studio Pro",
1116 /* .audio_inputs= 1, */
1118 .gpiomask = 0x03000F,
1119 .muxsel = MUXSEL(2, 3, 1, 1),
1120 .gpiomux = { 1, 0xd0001, 0, 0 },
1122 /* sound path (5 sources):
1123 MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
1126 2= Mono TV sound from Tuner
1128 MUX2 (mask 0x30000):
1130 1= FM stereo Radio from Tuner */
1133 .tuner_type = UNSET,
1134 .tuner_addr = ADDR_UNSET,
1136 [BTTV_BOARD_TVIEW_RDS_FM] = {
1137 /* Claas Langbehn <claas@bigfoot.com>,
1138 Sven Grothklags <sven@upb.de> */
1139 .name = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
1141 /* .audio_inputs= 3, */
1144 .muxsel = MUXSEL(2, 3, 1, 1),
1145 .gpiomux = { 0, 0, 0x10, 8 },
1149 .tuner_type = TUNER_PHILIPS_PAL,
1150 .tuner_addr = ADDR_UNSET,
1153 [BTTV_BOARD_LIFETEC_9415] = {
1154 /* Tim Röstermundt <rosterm@uni-muenster.de>
1155 in de.comp.os.unix.linux.hardware:
1156 options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
1157 gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
1158 options tuner type=5 */
1159 .name = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
1161 /* .audio_inputs= 1, */
1164 .muxsel = MUXSEL(2, 3, 1, 1),
1165 .gpiomux = { 0x0000,0x0800,0x1000,0x1000 },
1167 /* For cards with tda9820/tda9821:
1168 0x0000: Tuner normal stereo
1169 0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
1170 0x0880: Tuner A2 stereo */
1172 .tuner_type = UNSET,
1173 .tuner_addr = ADDR_UNSET,
1175 [BTTV_BOARD_BESTBUY_EASYTV] = {
1176 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1177 old Easy TV BT848 version (model CPH031) */
1178 .name = "Askey CPH031/ BESTBUY Easy TV",
1180 /* .audio_inputs= 1, */
1183 .muxsel = MUXSEL(2, 3, 1, 0),
1184 .gpiomux = { 2, 0, 0, 0 },
1188 .tuner_type = TUNER_TEMIC_PAL,
1189 .tuner_addr = ADDR_UNSET,
1192 /* ---- card 0x38 ---------------------------------- */
1193 [BTTV_BOARD_FLYVIDEO_98FM] = {
1194 /* Gordon Heydon <gjheydon@bigfoot.com ('98) */
1195 .name = "Lifeview FlyVideo 98FM LR50",
1197 /* .audio_inputs= 3, */
1200 .muxsel = MUXSEL(2, 3, 1, 1),
1201 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
1204 .tuner_type = TUNER_PHILIPS_PAL,
1205 .tuner_addr = ADDR_UNSET,
1207 /* This is the ultimate cheapo capture card
1208 * just a BT848A on a small PCB!
1209 * Steve Hosgood <steve@equiinet.com> */
1210 [BTTV_BOARD_GRANDTEC] = {
1211 .name = "GrandTec 'Grand Video Capture' (Bt848)",
1213 /* .audio_inputs= 0, */
1216 .muxsel = MUXSEL(3, 1),
1221 .tuner_type = TUNER_ABSENT,
1222 .tuner_addr = ADDR_UNSET,
1224 [BTTV_BOARD_ASKEY_CPH060] = {
1225 /* Daniel Herrington <daniel.herrington@home.com> */
1226 .name = "Askey CPH060/ Phoebe TV Master Only (No FM)",
1228 /* .audio_inputs= 1, */
1231 .muxsel = MUXSEL(2, 3, 1, 1),
1232 .gpiomux = { 0x400, 0x400, 0x400, 0x400 },
1236 .tuner_type = TUNER_TEMIC_4036FY5_NTSC,
1237 .tuner_addr = ADDR_UNSET,
1239 [BTTV_BOARD_ASKEY_CPH03X] = {
1240 /* Matti Mottus <mottus@physic.ut.ee> */
1241 .name = "Askey CPH03x TV Capturer",
1243 /* .audio_inputs= 1, */
1245 .gpiomask = 0x03000F,
1246 .muxsel = MUXSEL(2, 3, 1, 0),
1247 .gpiomux = { 2, 0, 0, 0 },
1250 .tuner_type = TUNER_TEMIC_PAL,
1251 .tuner_addr = ADDR_UNSET,
1254 /* ---- card 0x3c ---------------------------------- */
1255 [BTTV_BOARD_MM100PCTV] = {
1256 /* Philip Blundell <philb@gnu.org> */
1257 .name = "Modular Technology MM100PCTV",
1259 /* .audio_inputs= 2, */
1262 .muxsel = MUXSEL(2, 3, 1, 1),
1263 .gpiomux = { 2, 0, 0, 1 },
1266 .tuner_type = TUNER_TEMIC_PAL,
1267 .tuner_addr = ADDR_UNSET,
1269 [BTTV_BOARD_GMV1] = {
1270 /* Adrian Cox <adrian@humboldt.co.uk */
1271 .name = "AG Electronics GMV1",
1273 /* .audio_inputs= 0, */
1276 .muxsel = MUXSEL(2, 2),
1281 .tuner_type = TUNER_ABSENT,
1282 .tuner_addr = ADDR_UNSET,
1284 [BTTV_BOARD_BESTBUY_EASYTV2] = {
1285 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1286 new Easy TV BT878 version (model CPH061)
1287 special thanks to Informatica Mieres for providing the card */
1288 .name = "Askey CPH061/ BESTBUY Easy TV (bt878)",
1290 /* .audio_inputs= 2, */
1293 .muxsel = MUXSEL(2, 3, 1, 0),
1294 .gpiomux = { 1, 0, 4, 4 },
1298 .tuner_type = TUNER_PHILIPS_PAL,
1299 .tuner_addr = ADDR_UNSET,
1301 [BTTV_BOARD_ATI_TVWONDER] = {
1302 /* Lukas Gebauer <geby@volny.cz> */
1303 .name = "ATI TV-Wonder",
1305 /* .audio_inputs= 1, */
1308 .muxsel = MUXSEL(2, 3, 1, 0),
1309 .gpiomux = { 0xbffe, 0, 0xbfff, 0 },
1312 .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
1313 .tuner_addr = ADDR_UNSET,
1316 /* ---- card 0x40 ---------------------------------- */
1317 [BTTV_BOARD_ATI_TVWONDERVE] = {
1318 /* Lukas Gebauer <geby@volny.cz> */
1319 .name = "ATI TV-Wonder VE",
1321 /* .audio_inputs= 1, */
1324 .muxsel = MUXSEL(2, 3, 0, 1),
1325 .gpiomux = { 0, 0, 1, 0 },
1328 .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
1329 .tuner_addr = ADDR_UNSET,
1331 [BTTV_BOARD_FLYVIDEO2000] = {
1332 /* DeeJay <deejay@westel900.net (2000S) */
1333 .name = "Lifeview FlyVideo 2000S LR90",
1335 /* .audio_inputs= 3, */
1338 .muxsel = MUXSEL(2, 3, 0, 1),
1339 /* Radio changed from 1e80 to 0x800 to make
1340 FlyVideo2000S in .hu happy (gm)*/
1341 /* -dk-???: set mute=0x1800 for tda9874h daughterboard */
1342 .gpiomux = { 0x0000,0x0800,0x1000,0x1000 },
1344 .audio_mode_gpio= fv2000s_audio,
1349 .tuner_type = TUNER_PHILIPS_PAL,
1350 .tuner_addr = ADDR_UNSET,
1352 [BTTV_BOARD_TERRATVALUER] = {
1353 .name = "Terratec TValueRadio",
1355 /* .audio_inputs= 1, */
1357 .gpiomask = 0xffff00,
1358 .muxsel = MUXSEL(2, 3, 1, 1),
1359 .gpiomux = { 0x500, 0x500, 0x300, 0x900 },
1363 .tuner_type = TUNER_PHILIPS_PAL,
1364 .tuner_addr = ADDR_UNSET,
1367 [BTTV_BOARD_GVBCTV4PCI] = {
1368 /* TANAKA Kei <peg00625@nifty.com> */
1369 .name = "IODATA GV-BCTV4/PCI",
1371 /* .audio_inputs= 1, */
1373 .gpiomask = 0x010f00,
1374 .muxsel = MUXSEL(2, 3, 0, 0),
1375 .gpiomux = {0x10000, 0, 0x10000, 0 },
1378 .tuner_type = TUNER_SHARP_2U5JF5540_NTSC,
1379 .tuner_addr = ADDR_UNSET,
1380 .audio_mode_gpio= gvbctv3pci_audio,
1383 /* ---- card 0x44 ---------------------------------- */
1384 [BTTV_BOARD_VOODOOTV_FM] = {
1385 .name = "3Dfx VoodooTV FM (Euro)",
1386 /* try "insmod msp3400 simple=0" if you have
1387 * sound problems with this card. */
1389 /* .audio_inputs= 1, */
1391 .gpiomask = 0x4f8a00,
1392 /* 0x100000: 1=MSP enabled (0=disable again)
1393 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1394 .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff },
1395 .gpiomute = 0x947fff,
1396 /* tvtuner, radio, external,internal, mute, stereo
1397 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1398 .muxsel = MUXSEL(2, 3, 0, 1),
1399 .tuner_type = TUNER_MT2032,
1400 .tuner_addr = ADDR_UNSET,
1404 [BTTV_BOARD_VOODOOTV_200] = {
1405 .name = "VoodooTV 200 (USA)",
1406 /* try "insmod msp3400 simple=0" if you have
1407 * sound problems with this card. */
1409 /* .audio_inputs= 1, */
1411 .gpiomask = 0x4f8a00,
1412 /* 0x100000: 1=MSP enabled (0=disable again)
1413 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1414 .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff },
1415 .gpiomute = 0x947fff,
1416 /* tvtuner, radio, external,internal, mute, stereo
1417 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1418 .muxsel = MUXSEL(2, 3, 0, 1),
1419 .tuner_type = TUNER_MT2032,
1420 .tuner_addr = ADDR_UNSET,
1424 [BTTV_BOARD_AIMMS] = {
1425 /* Philip Blundell <pb@nexus.co.uk> */
1426 .name = "Active Imaging AIMMS",
1428 /* .audio_inputs= 0, */
1429 .tuner_type = TUNER_ABSENT,
1430 .tuner_addr = ADDR_UNSET,
1432 .muxsel = MUXSEL(2),
1435 [BTTV_BOARD_PV_BT878P_PLUS] = {
1436 /* Tomasz Pyra <hellfire@sedez.iq.pl> */
1437 .name = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
1439 /* .audio_inputs= 4, */
1442 .muxsel = MUXSEL(2, 3, 1, 1),
1443 .gpiomux = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */
1447 .tuner_type = TUNER_LG_PAL_I_FM,
1448 .tuner_addr = ADDR_UNSET,
1451 GPIO0: U4.A0 (hef4052bt)
1453 GPIO2: U4.A1 (second hef4052bt)
1454 GPIO3: U4.nEN, U5.A0, A5.nEN
1458 [BTTV_BOARD_FLYVIDEO98EZ] = {
1459 .name = "Lifeview FlyVideo 98EZ (capture only) LR51",
1461 /* .audio_inputs= 0, */
1463 /* AV1, AV2, SVHS, CVid adapter on SVHS */
1464 .muxsel = MUXSEL(2, 3, 1, 1),
1467 .tuner_type = TUNER_ABSENT,
1468 .tuner_addr = ADDR_UNSET,
1471 /* ---- card 0x48 ---------------------------------- */
1472 [BTTV_BOARD_PV_BT878P_9B] = {
1473 /* Dariusz Kowalewski <darekk@automex.pl> */
1474 .name = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
1476 /* .audio_inputs= 1, */
1479 .muxsel = MUXSEL(2, 3, 1, 1),
1480 .gpiomux = { 0x01, 0x00, 0x03, 0x03 },
1486 .tuner_type = TUNER_PHILIPS_PAL,
1487 .tuner_addr = ADDR_UNSET,
1488 .audio_mode_gpio= pvbt878p9b_audio, /* Note: not all cards have stereo */
1489 .has_radio = 1, /* Note: not all cards have radio */
1496 GPIO20,22,23: R30,R29,R28
1499 [BTTV_BOARD_SENSORAY311] = {
1500 /* Clay Kunz <ckunz@mail.arc.nasa.gov> */
1501 /* you must jumper JP5 for the card to work */
1502 .name = "Sensoray 311",
1504 /* .audio_inputs= 0, */
1507 .muxsel = MUXSEL(2, 3, 1, 0, 0),
1510 .tuner_type = TUNER_ABSENT,
1511 .tuner_addr = ADDR_UNSET,
1513 [BTTV_BOARD_RV605] = {
1514 /* Miguel Freitas <miguel@cetuc.puc-rio.br> */
1515 .name = "RemoteVision MX (RV605)",
1517 /* .audio_inputs= 0, */
1520 .gpiomask2 = 0x07ff,
1521 .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
1524 .tuner_type = TUNER_ABSENT,
1525 .tuner_addr = ADDR_UNSET,
1526 .muxsel_hook = rv605_muxsel,
1528 [BTTV_BOARD_POWERCLR_MTV878] = {
1529 .name = "Powercolor MTV878/ MTV878R/ MTV878F",
1531 /* .audio_inputs= 2, */
1533 .gpiomask = 0x1C800F, /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */
1534 .muxsel = MUXSEL(2, 1, 1),
1535 .gpiomux = { 0, 1, 2, 2 },
1538 .tuner_type = TUNER_PHILIPS_PAL,
1539 .tuner_addr = ADDR_UNSET,
1544 /* ---- card 0x4c ---------------------------------- */
1545 [BTTV_BOARD_WINDVR] = {
1546 /* Masaki Suzuki <masaki@btree.org> */
1547 .name = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
1549 /* .audio_inputs= 1, */
1551 .gpiomask = 0x140007,
1552 .muxsel = MUXSEL(2, 3, 1, 1),
1553 .gpiomux = { 0, 1, 2, 3 },
1555 .tuner_type = TUNER_PHILIPS_NTSC,
1556 .tuner_addr = ADDR_UNSET,
1557 .audio_mode_gpio= windvr_audio,
1559 [BTTV_BOARD_GRANDTEC_MULTI] = {
1560 .name = "GrandTec Multi Capture Card (Bt878)",
1562 /* .audio_inputs= 0, */
1565 .muxsel = MUXSEL(2, 3, 1, 0),
1570 .tuner_type = TUNER_ABSENT,
1571 .tuner_addr = ADDR_UNSET,
1573 [BTTV_BOARD_KWORLD] = {
1574 .name = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
1576 /* .audio_inputs= 3, */
1579 /* Tuner, SVid, SVHS, SVid to SVHS connector */
1580 .muxsel = MUXSEL(2, 3, 1, 1),
1581 .gpiomux = { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio!
1582 * This card lacks external Audio In, so we mute it on Ext. & Int.
1583 * The PCB can take a sbx1637/sbx1673, wiring unknown.
1584 * This card lacks PCI subsystem ID, sigh.
1585 * gpiomux =1: lower volume, 2+3: mute
1586 * btwincap uses 0x80000/0x80003
1592 .tuner_type = TUNER_PHILIPS_PAL,
1593 .tuner_addr = ADDR_UNSET,
1594 /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
1595 radio signal strength indicators work fine. */
1598 GPIO0,1: HEF4052 A0,A1
1599 GPIO2: HEF4052 nENABLE
1601 GPIO8-13: IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
1605 ?? : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
1607 [BTTV_BOARD_DSP_TCVIDEO] = {
1608 /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
1609 .name = "DSP Design TCVIDEO",
1612 .muxsel = MUXSEL(2, 3, 1, 0),
1614 .tuner_type = UNSET,
1615 .tuner_addr = ADDR_UNSET,
1618 /* ---- card 0x50 ---------------------------------- */
1619 [BTTV_BOARD_HAUPPAUGEPVR] = {
1620 .name = "Hauppauge WinTV PVR",
1622 /* .audio_inputs= 1, */
1624 .muxsel = MUXSEL(2, 0, 1, 1),
1627 .tuner_type = UNSET,
1628 .tuner_addr = ADDR_UNSET,
1633 [BTTV_BOARD_GVBCTV5PCI] = {
1634 .name = "IODATA GV-BCTV5/PCI",
1636 /* .audio_inputs= 1, */
1638 .gpiomask = 0x0f0f80,
1639 .muxsel = MUXSEL(2, 3, 1, 0),
1640 .gpiomux = {0x030000, 0x010000, 0, 0 },
1641 .gpiomute = 0x020000,
1644 .tuner_type = TUNER_PHILIPS_NTSC_M,
1645 .tuner_addr = ADDR_UNSET,
1646 .audio_mode_gpio= gvbctv5pci_audio,
1649 [BTTV_BOARD_OSPREY1x0] = {
1650 .name = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
1651 .video_inputs = 4, /* id-inputs-clock */
1652 /* .audio_inputs= 0, */
1654 .muxsel = MUXSEL(3, 2, 0, 1),
1656 .tuner_type = TUNER_ABSENT,
1657 .tuner_addr = ADDR_UNSET,
1662 [BTTV_BOARD_OSPREY1x0_848] = {
1663 .name = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
1665 /* .audio_inputs= 0, */
1667 .muxsel = MUXSEL(2, 3, 1),
1669 .tuner_type = TUNER_ABSENT,
1670 .tuner_addr = ADDR_UNSET,
1676 /* ---- card 0x54 ---------------------------------- */
1677 [BTTV_BOARD_OSPREY101_848] = {
1678 .name = "Osprey 101 (848)", /* 0x05-40C0-C1 */
1680 /* .audio_inputs= 0, */
1682 .muxsel = MUXSEL(3, 1),
1684 .tuner_type = TUNER_ABSENT,
1685 .tuner_addr = ADDR_UNSET,
1690 [BTTV_BOARD_OSPREY1x1] = {
1691 .name = "Osprey 101/151", /* 0x1(4|5)-0004-C4 */
1693 /* .audio_inputs= 0, */
1695 .muxsel = MUXSEL(0),
1697 .tuner_type = TUNER_ABSENT,
1698 .tuner_addr = ADDR_UNSET,
1703 [BTTV_BOARD_OSPREY1x1_SVID] = {
1704 .name = "Osprey 101/151 w/ svid", /* 0x(16|17|20)-00C4-C1 */
1706 /* .audio_inputs= 0, */
1708 .muxsel = MUXSEL(0, 1),
1710 .tuner_type = TUNER_ABSENT,
1711 .tuner_addr = ADDR_UNSET,
1716 [BTTV_BOARD_OSPREY2xx] = {
1717 .name = "Osprey 200/201/250/251", /* 0x1(8|9|E|F)-0004-C4 */
1719 /* .audio_inputs= 1, */
1721 .muxsel = MUXSEL(0),
1723 .tuner_type = TUNER_ABSENT,
1724 .tuner_addr = ADDR_UNSET,
1730 /* ---- card 0x58 ---------------------------------- */
1731 [BTTV_BOARD_OSPREY2x0_SVID] = {
1732 .name = "Osprey 200/250", /* 0x1(A|B)-00C4-C1 */
1734 /* .audio_inputs= 1, */
1736 .muxsel = MUXSEL(0, 1),
1738 .tuner_type = TUNER_ABSENT,
1739 .tuner_addr = ADDR_UNSET,
1744 [BTTV_BOARD_OSPREY2x0] = {
1745 .name = "Osprey 210/220/230", /* 0x1(A|B)-04C0-C1 */
1747 /* .audio_inputs= 1, */
1749 .muxsel = MUXSEL(2, 3),
1751 .tuner_type = TUNER_ABSENT,
1752 .tuner_addr = ADDR_UNSET,
1757 [BTTV_BOARD_OSPREY500] = {
1758 .name = "Osprey 500", /* 500 */
1760 /* .audio_inputs= 1, */
1762 .muxsel = MUXSEL(2, 3),
1764 .tuner_type = TUNER_ABSENT,
1765 .tuner_addr = ADDR_UNSET,
1770 [BTTV_BOARD_OSPREY540] = {
1771 .name = "Osprey 540", /* 540 */
1773 /* .audio_inputs= 1, */
1775 .tuner_type = TUNER_ABSENT,
1776 .tuner_addr = ADDR_UNSET,
1782 /* ---- card 0x5C ---------------------------------- */
1783 [BTTV_BOARD_OSPREY2000] = {
1784 .name = "Osprey 2000", /* 2000 */
1786 /* .audio_inputs= 1, */
1788 .muxsel = MUXSEL(2, 3),
1790 .tuner_type = TUNER_ABSENT,
1791 .tuner_addr = ADDR_UNSET,
1794 .no_tda7432 = 1, /* must avoid, conflicts with the bt860 */
1796 [BTTV_BOARD_IDS_EAGLE] = {
1797 /* M G Berberich <berberic@forwiss.uni-passau.de> */
1798 .name = "IDS Eagle",
1800 /* .audio_inputs= 0, */
1801 .tuner_type = TUNER_ABSENT,
1802 .tuner_addr = ADDR_UNSET,
1805 .muxsel = MUXSEL(2, 2, 2, 2),
1806 .muxsel_hook = eagle_muxsel,
1811 [BTTV_BOARD_PINNACLESAT] = {
1812 .name = "Pinnacle PCTV Sat",
1814 /* .audio_inputs= 0, */
1816 .tuner_type = TUNER_ABSENT,
1817 .tuner_addr = ADDR_UNSET,
1821 .muxsel = MUXSEL(3, 1),
1826 [BTTV_BOARD_FORMAC_PROTV] = {
1827 .name = "Formac ProTV II (bt878)",
1829 /* .audio_inputs= 1, */
1832 /* TV, Comp1, Composite over SVID con, SVID */
1833 .muxsel = MUXSEL(2, 3, 1, 1),
1834 .gpiomux = { 2, 2, 0, 0 },
1837 .tuner_type = TUNER_PHILIPS_PAL,
1838 .tuner_addr = ADDR_UNSET,
1840 GPIO=0x00,0x01,0x03: mute (?)
1841 0x02: both TV and radio (tuner: FM1216/I)
1842 The card has onboard audio connectors labeled "cdrom" and "board",
1843 not soldered here, though unknown wiring.
1844 Card lacks: external audio in, pci subsystem id.
1848 /* ---- card 0x60 ---------------------------------- */
1849 [BTTV_BOARD_MACHTV] = {
1852 /* .audio_inputs= 1, */
1855 .muxsel = MUXSEL(2, 3, 1, 1),
1856 .gpiomux = { 0, 1, 2, 3},
1859 .tuner_type = TUNER_PHILIPS_PAL,
1860 .tuner_addr = ADDR_UNSET,
1863 [BTTV_BOARD_EURESYS_PICOLO] = {
1864 .name = "Euresys Picolo",
1866 /* .audio_inputs= 0, */
1872 .muxsel = MUXSEL(2, 0, 1),
1874 .tuner_type = TUNER_ABSENT,
1875 .tuner_addr = ADDR_UNSET,
1877 [BTTV_BOARD_PV150] = {
1878 /* Luc Van Hoeylandt <luc@e-magic.be> */
1879 .name = "ProVideo PV150", /* 0x4f */
1881 /* .audio_inputs= 0, */
1884 .muxsel = MUXSEL(2, 3),
1889 .tuner_type = TUNER_ABSENT,
1890 .tuner_addr = ADDR_UNSET,
1892 [BTTV_BOARD_AD_TVK503] = {
1893 /* Hiroshi Takekawa <sian@big.or.jp> */
1894 /* This card lacks subsystem ID */
1895 .name = "AD-TVK503", /* 0x63 */
1897 /* .audio_inputs= 1, */
1899 .gpiomask = 0x001e8007,
1900 .muxsel = MUXSEL(2, 3, 1, 0),
1901 /* Tuner, Radio, external, internal, off, on */
1902 .gpiomux = { 0x08, 0x0f, 0x0a, 0x08 },
1907 .tuner_type = TUNER_PHILIPS_NTSC,
1908 .tuner_addr = ADDR_UNSET,
1909 .audio_mode_gpio= adtvk503_audio,
1912 /* ---- card 0x64 ---------------------------------- */
1913 [BTTV_BOARD_HERCULES_SM_TV] = {
1914 .name = "Hercules Smart TV Stereo",
1916 /* .audio_inputs= 1, */
1919 .muxsel = MUXSEL(2, 3, 1, 1),
1923 .tuner_type = TUNER_PHILIPS_PAL,
1924 .tuner_addr = ADDR_UNSET,
1926 - card lacks subsystem ID
1927 - stereo variant w/ daughter board with tda9874a @0xb0
1929 always from tda9874 independent of GPIO (?)
1930 external line in: unknown
1931 - Other chips: em78p156elp @ 0x96 (probably IR remote control)
1932 hef4053 (instead 4052) for unknown function
1935 [BTTV_BOARD_PACETV] = {
1936 .name = "Pace TV & Radio Card",
1938 /* .audio_inputs= 1, */
1940 /* Tuner, CVid, SVid, CVid over SVid connector */
1941 .muxsel = MUXSEL(2, 3, 1, 1),
1945 .tuner_type = TUNER_PHILIPS_PAL_I,
1946 .tuner_addr = ADDR_UNSET,
1949 /* Bt878, Bt832, FI1246 tuner; no pci subsystem id
1950 only internal line out: (4pin header) RGGL
1951 Radio must be decoded by msp3410d (not routed through)*/
1953 .digital_mode = DIGITAL_MODE_CAMERA, todo!
1956 [BTTV_BOARD_IVC200] = {
1957 /* Chris Willing <chris@vislab.usyd.edu.au> */
1960 /* .audio_inputs= 0, */
1961 .tuner_type = TUNER_ABSENT,
1962 .tuner_addr = ADDR_UNSET,
1965 .muxsel = MUXSEL(2),
1968 [BTTV_BOARD_IVCE8784] = {
1969 .name = "IVCE-8784",
1971 /* .audio_inputs= 0, */
1972 .tuner_type = TUNER_ABSENT,
1973 .tuner_addr = ADDR_UNSET,
1976 .muxsel = MUXSEL(2),
1979 [BTTV_BOARD_XGUARD] = {
1980 .name = "Grand X-Guard / Trust 814PCI",
1982 /* .audio_inputs= 0, */
1984 .tuner_type = TUNER_ABSENT,
1985 .tuner_addr = ADDR_UNSET,
1987 .muxsel = MUXSEL(2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0),
1988 .muxsel_hook = xguard_muxsel,
1995 /* ---- card 0x68 ---------------------------------- */
1996 [BTTV_BOARD_NEBULA_DIGITV] = {
1997 .name = "Nebula Electronics DigiTV",
2000 .muxsel = MUXSEL(2, 3, 1, 0),
2005 .tuner_type = TUNER_ABSENT,
2006 .tuner_addr = ADDR_UNSET,
2012 [BTTV_BOARD_PV143] = {
2013 /* Jorge Boncompte - DTI2 <jorge@dti2.net> */
2014 .name = "ProVideo PV143",
2016 /* .audio_inputs= 0, */
2019 .muxsel = MUXSEL(2, 3, 1, 0),
2024 .tuner_type = TUNER_ABSENT,
2025 .tuner_addr = ADDR_UNSET,
2027 [BTTV_BOARD_VD009X1_VD011_MINIDIN] = {
2028 /* M.Klahr@phytec.de */
2029 .name = "PHYTEC VD-009-X1 VD-011 MiniDIN (bt878)",
2031 /* .audio_inputs= 0, */
2034 .muxsel = MUXSEL(2, 3, 1, 0),
2035 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2038 .tuner_type = TUNER_ABSENT,
2039 .tuner_addr = ADDR_UNSET,
2041 [BTTV_BOARD_VD009X1_VD011_COMBI] = {
2042 .name = "PHYTEC VD-009-X1 VD-011 Combi (bt878)",
2044 /* .audio_inputs= 0, */
2047 .muxsel = MUXSEL(2, 3, 1, 1),
2048 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2051 .tuner_type = TUNER_ABSENT,
2052 .tuner_addr = ADDR_UNSET,
2055 /* ---- card 0x6c ---------------------------------- */
2056 [BTTV_BOARD_VD009_MINIDIN] = {
2057 .name = "PHYTEC VD-009 MiniDIN (bt878)",
2059 /* .audio_inputs= 0, */
2062 .gpiomask2 = 0x03, /* used for external vodeo mux */
2063 .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 0),
2064 .muxsel_hook = phytec_muxsel,
2065 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2068 .tuner_type = TUNER_ABSENT,
2069 .tuner_addr = ADDR_UNSET,
2071 [BTTV_BOARD_VD009_COMBI] = {
2072 .name = "PHYTEC VD-009 Combi (bt878)",
2074 /* .audio_inputs= 0, */
2077 .gpiomask2 = 0x03, /* used for external vodeo mux */
2078 .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1),
2079 .muxsel_hook = phytec_muxsel,
2080 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2083 .tuner_type = TUNER_ABSENT,
2084 .tuner_addr = ADDR_UNSET,
2086 [BTTV_BOARD_IVC100] = {
2089 /* .audio_inputs= 0, */
2090 .tuner_type = TUNER_ABSENT,
2091 .tuner_addr = ADDR_UNSET,
2094 .muxsel = MUXSEL(2, 3, 1, 0),
2097 [BTTV_BOARD_IVC120] = {
2098 /* IVC-120G - Alan Garfield <alan@fromorbit.com> */
2101 /* .audio_inputs= 0, */
2102 .tuner_type = TUNER_ABSENT,
2103 .tuner_addr = ADDR_UNSET,
2104 .svhs = NO_SVHS, /* card has no svhs */
2110 .muxsel = MUXSEL(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0),
2111 .muxsel_hook = ivc120_muxsel,
2115 /* ---- card 0x70 ---------------------------------- */
2116 [BTTV_BOARD_PC_HDTV] = {
2117 .name = "pcHDTV HD-2000 TV",
2119 /* .audio_inputs= 1, */
2121 .muxsel = MUXSEL(2, 3, 1, 0),
2122 .tuner_type = TUNER_PHILIPS_FCV1236D,
2123 .tuner_addr = ADDR_UNSET,
2126 [BTTV_BOARD_TWINHAN_DST] = {
2127 .name = "Twinhan DST + clones",
2131 .tuner_type = TUNER_ABSENT,
2132 .tuner_addr = ADDR_UNSET,
2136 [BTTV_BOARD_WINFASTVC100] = {
2137 .name = "Winfast VC100",
2139 /* .audio_inputs= 0, */
2141 /* Vid In, SVid In, Vid over SVid in connector */
2142 .muxsel = MUXSEL(3, 1, 1, 3),
2146 .tuner_type = TUNER_ABSENT,
2147 .tuner_addr = ADDR_UNSET,
2150 [BTTV_BOARD_TEV560] = {
2151 .name = "Teppro TEV-560/InterVision IV-560",
2153 /* .audio_inputs= 1, */
2156 .muxsel = MUXSEL(2, 3, 1, 1),
2157 .gpiomux = { 1, 1, 1, 1 },
2159 .tuner_type = TUNER_PHILIPS_PAL,
2160 .tuner_addr = ADDR_UNSET,
2164 /* ---- card 0x74 ---------------------------------- */
2165 [BTTV_BOARD_SIMUS_GVC1100] = {
2166 .name = "SIMUS GVC1100",
2168 /* .audio_inputs= 0, */
2170 .tuner_type = TUNER_ABSENT,
2171 .tuner_addr = ADDR_UNSET,
2173 .muxsel = MUXSEL(2, 2, 2, 2),
2175 .muxsel_hook = gvc1100_muxsel,
2177 [BTTV_BOARD_NGSTV_PLUS] = {
2178 /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
2179 .name = "NGS NGSTV+",
2182 .gpiomask = 0x008007,
2183 .muxsel = MUXSEL(2, 3, 0, 0),
2184 .gpiomux = { 0, 0, 0, 0 },
2185 .gpiomute = 0x000003,
2187 .tuner_type = TUNER_PHILIPS_PAL,
2188 .tuner_addr = ADDR_UNSET,
2191 [BTTV_BOARD_LMLBT4] = {
2192 /* http://linuxmedialabs.com */
2194 .video_inputs = 4, /* IN1,IN2,IN3,IN4 */
2195 /* .audio_inputs= 0, */
2197 .muxsel = MUXSEL(2, 3, 1, 0),
2202 .tuner_type = TUNER_ABSENT,
2203 .tuner_addr = ADDR_UNSET,
2205 [BTTV_BOARD_TEKRAM_M205] = {
2206 /* Helmroos Harri <harri.helmroos@pp.inet.fi> */
2207 .name = "Tekram M205 PRO",
2209 /* .audio_inputs= 1, */
2210 .tuner_type = TUNER_PHILIPS_PAL,
2211 .tuner_addr = ADDR_UNSET,
2215 .muxsel = MUXSEL(2, 3, 1),
2216 .gpiomux = { 0x68, 0x68, 0x61, 0x61 },
2220 /* ---- card 0x78 ---------------------------------- */
2221 [BTTV_BOARD_CONTVFMI] = {
2222 /* Javier Cendan Ares <jcendan@lycos.es> */
2223 /* bt878 TV + FM without subsystem ID */
2224 .name = "Conceptronic CONTVFMi",
2226 /* .audio_inputs= 1, */
2228 .gpiomask = 0x008007,
2229 .muxsel = MUXSEL(2, 3, 1, 1),
2230 .gpiomux = { 0, 1, 2, 2 },
2234 .tuner_type = TUNER_PHILIPS_PAL,
2235 .tuner_addr = ADDR_UNSET,
2239 [BTTV_BOARD_PICOLO_TETRA_CHIP] = {
2240 /*Eric DEBIEF <debief@telemsa.com>*/
2241 /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controled*/
2242 /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the folowing declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/
2244 .name = "Euresys Picolo Tetra",
2246 /* .audio_inputs= 0, */
2249 .gpiomask2 = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
2253 /*878A input is always MUX0, see above.*/
2254 .muxsel = MUXSEL(2, 2, 2, 2),
2255 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2258 .muxsel_hook = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
2259 .tuner_type = TUNER_ABSENT,
2260 .tuner_addr = ADDR_UNSET,
2262 [BTTV_BOARD_SPIRIT_TV] = {
2263 /* Spirit TV Tuner from http://spiritmodems.com.au */
2264 /* Stafford Goodsell <surge@goliath.homeunix.org> */
2265 .name = "Spirit TV Tuner",
2267 /* .audio_inputs= 1, */
2269 .gpiomask = 0x0000000f,
2270 .muxsel = MUXSEL(2, 1, 1),
2271 .gpiomux = { 0x02, 0x00, 0x00, 0x00 },
2272 .tuner_type = TUNER_TEMIC_PAL,
2273 .tuner_addr = ADDR_UNSET,
2277 [BTTV_BOARD_AVDVBT_771] = {
2278 /* Wolfram Joost <wojo@frokaschwei.de> */
2279 .name = "AVerMedia AVerTV DVB-T 771",
2282 .tuner_type = TUNER_ABSENT,
2283 .tuner_addr = ADDR_UNSET,
2284 .muxsel = MUXSEL(3, 3),
2293 /* ---- card 0x7c ---------------------------------- */
2294 [BTTV_BOARD_AVDVBT_761] = {
2295 /* Matt Jesson <dvb@jesson.eclipse.co.uk> */
2296 /* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */
2297 .name = "AverMedia AverTV DVB-T 761",
2300 .muxsel = MUXSEL(3, 1, 2, 0), /* Comp0, S-Video, ?, ? */
2305 .tuner_type = TUNER_ABSENT,
2306 .tuner_addr = ADDR_UNSET,
2311 [BTTV_BOARD_MATRIX_VISIONSQ] = {
2312 /* andre.schwarz@matrix-vision.de */
2313 .name = "MATRIX Vision Sigma-SQ",
2315 /* .audio_inputs= 0, */
2318 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3),
2319 .muxsel_hook = sigmaSQ_muxsel,
2323 .tuner_type = TUNER_ABSENT,
2324 .tuner_addr = ADDR_UNSET,
2326 [BTTV_BOARD_MATRIX_VISIONSLC] = {
2327 /* andre.schwarz@matrix-vision.de */
2328 .name = "MATRIX Vision Sigma-SLC",
2330 /* .audio_inputs= 0, */
2333 .muxsel = MUXSEL(2, 2, 2, 2),
2334 .muxsel_hook = sigmaSLC_muxsel,
2338 .tuner_type = TUNER_ABSENT,
2339 .tuner_addr = ADDR_UNSET,
2341 /* BTTV_BOARD_APAC_VIEWCOMP */
2342 [BTTV_BOARD_APAC_VIEWCOMP] = {
2343 /* Attila Kondoros <attila.kondoros@chello.hu> */
2344 /* bt878 TV + FM 0x00000000 subsystem ID */
2345 .name = "APAC Viewcomp 878(AMAX)",
2347 /* .audio_inputs= 1, */
2350 .muxsel = MUXSEL(2, 3, 1, 1),
2351 .gpiomux = { 2, 0, 0, 0 },
2355 .tuner_type = TUNER_PHILIPS_PAL,
2356 .tuner_addr = ADDR_UNSET,
2357 .has_remote = 1, /* miniremote works, see ir-kbd-gpio.c */
2358 .has_radio = 1, /* not every card has radio */
2361 /* ---- card 0x80 ---------------------------------- */
2362 [BTTV_BOARD_DVICO_DVBT_LITE] = {
2363 /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
2364 .name = "DViCO FusionHDTV DVB-T Lite",
2371 .tuner_type = TUNER_ABSENT,
2372 .tuner_addr = ADDR_UNSET,
2374 [BTTV_BOARD_VGEAR_MYVCD] = {
2375 /* Steven <photon38@pchome.com.tw> */
2376 .name = "V-Gear MyVCD",
2378 /* .audio_inputs= 1, */
2381 .muxsel = MUXSEL(2, 3, 1, 0),
2382 .gpiomux = {0x31, 0x31, 0x31, 0x31 },
2386 .tuner_type = TUNER_PHILIPS_NTSC_M,
2387 .tuner_addr = ADDR_UNSET,
2390 [BTTV_BOARD_SUPER_TV] = {
2391 /* Rick C <cryptdragoon@gmail.com> */
2392 .name = "Super TV Tuner",
2394 /* .audio_inputs= 1, */
2396 .muxsel = MUXSEL(2, 3, 1, 0),
2397 .tuner_type = TUNER_PHILIPS_NTSC,
2398 .tuner_addr = ADDR_UNSET,
2399 .gpiomask = 0x008007,
2400 .gpiomux = { 0, 0x000001,0,0 },
2404 [BTTV_BOARD_TIBET_CS16] = {
2405 /* Chris Fanning <video4linux@haydon.net> */
2406 .name = "Tibet Systems 'Progress DVR' CS16",
2408 /* .audio_inputs= 0, */
2410 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2415 .tuner_type = TUNER_ABSENT,
2416 .tuner_addr = ADDR_UNSET,
2417 .muxsel_hook = tibetCS16_muxsel,
2419 [BTTV_BOARD_KODICOM_4400R] = {
2420 /* Bill Brack <wbrack@mmm.com.hk> */
2422 * Note that, because of the card's wiring, the "master"
2423 * BT878A chip (i.e. the one which controls the analog switch
2424 * and must use this card type) is the 2nd one detected. The
2425 * other 3 chips should use card type 0x85, whose description
2426 * follows this one. There is a EEPROM on the card (which is
2427 * connected to the I2C of one of those other chips), but is
2428 * not currently handled. There is also a facility for a
2429 * "monitor", which is also not currently implemented.
2431 .name = "Kodicom 4400R (master)",
2433 /* .audio_inputs= 0, */
2434 .tuner_type = TUNER_ABSENT,
2435 .tuner_addr = ADDR_UNSET,
2437 /* GPIO bits 0-9 used for analog switch:
2438 * 00 - 03: camera selector
2439 * 04 - 06: channel (controller) selector
2440 * 07: data (1->on, 0->off)
2443 * bit 16 is input from sync separator for the channel
2445 .gpiomask = 0x0003ff,
2447 .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
2452 .muxsel_hook = kodicom4400r_muxsel,
2454 [BTTV_BOARD_KODICOM_4400R_SL] = {
2455 /* Bill Brack <wbrack@mmm.com.hk> */
2456 /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the
2457 * one which controls the analog switch, and must use the card type)
2458 * is the 2nd one detected. The other 3 chips should use this card
2461 .name = "Kodicom 4400R (slave)",
2463 /* .audio_inputs= 0, */
2464 .tuner_type = TUNER_ABSENT,
2465 .tuner_addr = ADDR_UNSET,
2467 .gpiomask = 0x010000,
2469 .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
2474 .muxsel_hook = kodicom4400r_muxsel,
2476 /* ---- card 0x86---------------------------------- */
2477 [BTTV_BOARD_ADLINK_RTV24] = {
2478 /* Michael Henson <mhenson@clarityvi.com> */
2479 /* Adlink RTV24 with special unlock codes */
2480 .name = "Adlink RTV24",
2482 /* .audio_inputs= 1, */
2484 .muxsel = MUXSEL(2, 3, 1, 0),
2485 .tuner_type = UNSET,
2486 .tuner_addr = ADDR_UNSET,
2489 /* ---- card 0x87---------------------------------- */
2490 [BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = {
2491 /* Michael Krufky <mkrufky@m1k.net> */
2492 .name = "DViCO FusionHDTV 5 Lite",
2493 .tuner_type = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */
2494 .tuner_addr = ADDR_UNSET,
2496 /* .audio_inputs= 1, */
2498 .muxsel = MUXSEL(2, 3, 1),
2499 .gpiomask = 0x00e00007,
2500 .gpiomux = { 0x00400005, 0, 0x00000001, 0 },
2501 .gpiomute = 0x00c00007,
2507 /* ---- card 0x88---------------------------------- */
2508 [BTTV_BOARD_ACORP_Y878F] = {
2509 /* Mauro Carvalho Chehab <mchehab@infradead.org> */
2510 .name = "Acorp Y878F",
2512 /* .audio_inputs= 1, */
2514 .gpiomask = 0x01fe00,
2515 .muxsel = MUXSEL(2, 3, 1, 1),
2516 .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 },
2517 .gpiomute = 0x002000,
2520 .tuner_type = TUNER_YMEC_TVF66T5_B_DFF,
2521 .tuner_addr = 0xc1 >>1,
2524 /* ---- card 0x89 ---------------------------------- */
2525 [BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = {
2526 .name = "Conceptronic CTVFMi v2",
2528 /* .audio_inputs= 1, */
2530 .gpiomask = 0x001c0007,
2531 .muxsel = MUXSEL(2, 3, 1, 1),
2532 .gpiomux = { 0, 1, 2, 2 },
2536 .tuner_type = TUNER_TENA_9533_DI,
2537 .tuner_addr = ADDR_UNSET,
2541 /* ---- card 0x8a ---------------------------------- */
2542 [BTTV_BOARD_PV_BT878P_2E] = {
2543 .name = "Prolink Pixelview PV-BT878P+ (Rev.2E)",
2545 /* .audio_inputs= 1, */
2548 .gpiomask = 0x01fe00,
2549 .muxsel = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
2550 /* .digital_mode= DIGITAL_MODE_CAMERA, */
2551 .gpiomux = { 0x00400, 0x10400, 0x04400, 0x80000 },
2552 .gpiomute = 0x12400,
2555 .tuner_type = TUNER_LG_PAL_FM,
2556 .tuner_addr = ADDR_UNSET,
2559 /* ---- card 0x8b ---------------------------------- */
2560 [BTTV_BOARD_PV_M4900] = {
2561 /* Sérgio Fortier <sergiofortier@yahoo.com.br> */
2562 .name = "Prolink PixelView PlayTV MPEG2 PV-M4900",
2564 /* .audio_inputs= 1, */
2567 .muxsel = MUXSEL(2, 3, 1, 1),
2568 .gpiomux = { 0x21, 0x20, 0x24, 0x2c },
2572 .tuner_type = TUNER_YMEC_TVF_5533MF,
2573 .tuner_addr = ADDR_UNSET,
2577 /* ---- card 0x8c ---------------------------------- */
2578 /* Has four Bt878 chips behind a PCI bridge, each chip has:
2579 one external BNC composite input (mux 2)
2580 three internal composite inputs (unknown muxes)
2581 an 18-bit stereo A/D (CS5331A), which has:
2582 one external stereo unblanced (RCA) audio connection
2583 one (or 3?) internal stereo balanced (XLR) audio connection
2584 input is selected via gpio to a 14052B mux
2585 (mask=0x300, unbal=0x000, bal=0x100, ??=0x200,0x300)
2586 gain is controlled via an X9221A chip on the I2C bus @0x28
2587 sample rate is controlled via gpio to an MK1413S
2588 (mask=0x3, 32kHz=0x0, 44.1kHz=0x1, 48kHz=0x2, ??=0x3)
2589 There is neither a tuner nor an svideo input. */
2590 [BTTV_BOARD_OSPREY440] = {
2591 .name = "Osprey 440",
2593 /* .audio_inputs= 2, */
2595 .muxsel = MUXSEL(2, 3, 0, 1), /* 3,0,1 are guesses */
2597 .gpiomute = 0x000, /* int + 32kHz */
2598 .gpiomux = { 0, 0, 0x000, 0x100},
2600 .tuner_type = TUNER_ABSENT,
2601 .tuner_addr = ADDR_UNSET,
2606 /* ---- card 0x8d ---------------------------------- */
2607 [BTTV_BOARD_ASOUND_SKYEYE] = {
2608 .name = "Asound Skyeye PCTV",
2610 /* .audio_inputs= 1, */
2613 .muxsel = MUXSEL(2, 3, 1, 1),
2614 .gpiomux = { 2, 0, 0, 0 },
2618 .tuner_type = TUNER_PHILIPS_NTSC,
2619 .tuner_addr = ADDR_UNSET,
2621 /* ---- card 0x8e ---------------------------------- */
2622 [BTTV_BOARD_SABRENT_TVFM] = {
2623 .name = "Sabrent TV-FM (bttv version)",
2625 /* .audio_inputs= 1, */
2627 .gpiomask = 0x108007,
2628 .muxsel = MUXSEL(2, 3, 1, 1),
2629 .gpiomux = { 100000, 100002, 100002, 100000 },
2634 .tuner_type = TUNER_TNF_5335MF,
2635 .tuner_addr = ADDR_UNSET,
2638 /* ---- card 0x8f ---------------------------------- */
2639 [BTTV_BOARD_HAUPPAUGE_IMPACTVCB] = {
2640 .name = "Hauppauge ImpactVCB (bt878)",
2642 /* .audio_inputs= 0, */
2644 .gpiomask = 0x0f, /* old: 7 */
2645 .muxsel = MUXSEL(0, 1, 3, 2), /* Composite 0-3 */
2649 .tuner_type = TUNER_ABSENT,
2650 .tuner_addr = ADDR_UNSET,
2652 [BTTV_BOARD_MACHTV_MAGICTV] = {
2653 /* Julian Calaby <julian.calaby@gmail.com>
2654 * Slightly different from original MachTV definition (0x60)
2656 * FIXME: RegSpy says gpiomask should be "0x001c800f", but it
2657 * stuffs up remote chip. Bug is a pin on the jaecs is not set
2658 * properly (methinks) causing no keyup bits being set */
2660 .name = "MagicTV", /* rebranded MachTV */
2662 /* .audio_inputs= 1, */
2665 .muxsel = MUXSEL(2, 3, 1, 1),
2666 .gpiomux = { 0, 1, 2, 3 },
2668 .tuner_type = TUNER_TEMIC_4009FR5_PAL,
2669 .tuner_addr = ADDR_UNSET,
2674 [BTTV_BOARD_SSAI_SECURITY] = {
2675 .name = "SSAI Security Video Interface",
2677 /* .audio_inputs= 0, */
2679 .muxsel = MUXSEL(0, 1, 2, 3),
2680 .tuner_type = TUNER_ABSENT,
2681 .tuner_addr = ADDR_UNSET,
2683 [BTTV_BOARD_SSAI_ULTRASOUND] = {
2684 .name = "SSAI Ultrasound Video Interface",
2686 /* .audio_inputs= 0, */
2688 .muxsel = MUXSEL(2, 0, 1, 3),
2689 .tuner_type = TUNER_ABSENT,
2690 .tuner_addr = ADDR_UNSET,
2692 /* ---- card 0x94---------------------------------- */
2693 [BTTV_BOARD_DVICO_FUSIONHDTV_2] = {
2694 .name = "DViCO FusionHDTV 2",
2695 .tuner_type = TUNER_PHILIPS_FCV1236D,
2696 .tuner_addr = ADDR_UNSET,
2698 /* .audio_inputs= 1, */
2700 .muxsel = MUXSEL(2, 3, 1),
2701 .gpiomask = 0x00e00007,
2702 .gpiomux = { 0x00400005, 0, 0x00000001, 0 },
2703 .gpiomute = 0x00c00007,
2708 /* ---- card 0x95---------------------------------- */
2709 [BTTV_BOARD_TYPHOON_TVTUNERPCI] = {
2710 .name = "Typhoon TV-Tuner PCI (50684)",
2712 /* .audio_inputs= 1, */
2714 .gpiomask = 0x3014f,
2715 .muxsel = MUXSEL(2, 3, 1, 1),
2716 .gpiomux = { 0x20001,0x10001, 0, 0 },
2720 .tuner_type = TUNER_PHILIPS_PAL_I,
2721 .tuner_addr = ADDR_UNSET,
2723 [BTTV_BOARD_GEOVISION_GV600] = {
2725 .name = "Geovision GV-600",
2727 /* .audio_inputs= 0, */
2730 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2731 .muxsel_hook = geovision_muxsel,
2735 .tuner_type = TUNER_ABSENT,
2736 .tuner_addr = ADDR_UNSET,
2738 [BTTV_BOARD_KOZUMI_KTV_01C] = {
2739 /* Mauro Lacy <mauro@lacy.com.ar>
2740 * Based on MagicTV and Conceptronic CONTVFMi */
2742 .name = "Kozumi KTV-01C",
2744 /* .audio_inputs= 1, */
2746 .gpiomask = 0x008007,
2747 .muxsel = MUXSEL(2, 3, 1, 1),
2748 .gpiomux = { 0, 1, 2, 2 }, /* CONTVFMi */
2749 .gpiomute = 3, /* CONTVFMi */
2751 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, /* TCL MK3 */
2752 .tuner_addr = ADDR_UNSET,
2757 [BTTV_BOARD_ENLTV_FM_2] = {
2758 /* Encore TV Tuner Pro ENL TV-FM-2
2759 Mauro Carvalho Chehab <mchehab@infradead.org */
2760 .name = "Encore ENL TV-FM-2",
2762 /* .audio_inputs= 1, */
2764 /* bit 6 -> IR disabled
2765 bit 18/17 = 00 -> mute
2766 01 -> enable external audio input
2767 10 -> internal audio input (mono?)
2768 11 -> internal audio input
2770 .gpiomask = 0x060040,
2771 .muxsel = MUXSEL(2, 3, 3),
2772 .gpiomux = { 0x60000, 0x60000, 0x20000, 0x20000 },
2774 .tuner_type = TUNER_TCL_MF02GIP_5N,
2775 .tuner_addr = ADDR_UNSET,
2780 [BTTV_BOARD_VD012] = {
2781 /* D.Heer@Phytec.de */
2782 .name = "PHYTEC VD-012 (bt878)",
2784 /* .audio_inputs= 0, */
2787 .muxsel = MUXSEL(0, 2, 3, 1),
2788 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2791 .tuner_type = TUNER_ABSENT,
2792 .tuner_addr = ADDR_UNSET,
2794 [BTTV_BOARD_VD012_X1] = {
2795 /* D.Heer@Phytec.de */
2796 .name = "PHYTEC VD-012-X1 (bt878)",
2798 /* .audio_inputs= 0, */
2801 .muxsel = MUXSEL(2, 3, 1),
2802 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2805 .tuner_type = TUNER_ABSENT,
2806 .tuner_addr = ADDR_UNSET,
2808 [BTTV_BOARD_VD012_X2] = {
2809 /* D.Heer@Phytec.de */
2810 .name = "PHYTEC VD-012-X2 (bt878)",
2812 /* .audio_inputs= 0, */
2815 .muxsel = MUXSEL(3, 2, 1),
2816 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2819 .tuner_type = TUNER_ABSENT,
2820 .tuner_addr = ADDR_UNSET,
2824 static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
2826 /* ----------------------------------------------------------------------- */
2828 static unsigned char eeprom_data[256];
2833 void __devinit bttv_idcard(struct bttv *btv)
2835 unsigned int gpiobits;
2839 /* read PCI subsystem ID */
2840 pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_ID, &tmp);
2841 btv->cardid = tmp << 16;
2842 pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_VENDOR_ID, &tmp);
2845 if (0 != btv->cardid && 0xffffffff != btv->cardid) {
2846 /* look for the card */
2847 for (type = -1, i = 0; cards[i].id != 0; i++)
2848 if (cards[i].id == btv->cardid)
2853 printk(KERN_INFO "bttv%d: detected: %s [card=%d], "
2854 "PCI subsystem ID is %04x:%04x\n",
2855 btv->c.nr,cards[type].name,cards[type].cardnr,
2856 btv->cardid & 0xffff,
2857 (btv->cardid >> 16) & 0xffff);
2858 btv->c.type = cards[type].cardnr;
2861 printk(KERN_INFO "bttv%d: subsystem: %04x:%04x (UNKNOWN)\n",
2862 btv->c.nr, btv->cardid & 0xffff,
2863 (btv->cardid >> 16) & 0xffff);
2864 printk(KERN_DEBUG "please mail id, board name and "
2865 "the correct card= insmod option to video4linux-list@redhat.com\n");
2869 /* let the user override the autodetected type */
2870 if (card[btv->c.nr] < bttv_num_tvcards)
2871 btv->c.type=card[btv->c.nr];
2873 /* print which card config we are using */
2874 printk(KERN_INFO "bttv%d: using: %s [card=%d,%s]\n",btv->c.nr,
2875 bttv_tvcards[btv->c.type].name, btv->c.type,
2876 card[btv->c.nr] < bttv_num_tvcards
2877 ? "insmod option" : "autodetected");
2879 /* overwrite gpio stuff ?? */
2880 if (UNSET == audioall && UNSET == audiomux[0])
2883 if (UNSET != audiomux[0]) {
2885 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2886 bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i];
2887 gpiobits |= audiomux[i];
2890 gpiobits = audioall;
2891 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2892 bttv_tvcards[btv->c.type].gpiomux[i] = audioall;
2895 bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
2896 printk(KERN_INFO "bttv%d: gpio config override: mask=0x%x, mux=",
2897 btv->c.nr,bttv_tvcards[btv->c.type].gpiomask);
2898 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2899 printk("%s0x%x", i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]);
2905 * (most) board specific initialisations goes here
2908 /* Some Modular Technology cards have an eeprom, but no subsystem ID */
2909 static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
2913 if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13))
2914 type = BTTV_BOARD_MODTEC_205;
2915 else if (0 == strncmp(eeprom_data+20,"Picolo",7))
2916 type = BTTV_BOARD_EURESYS_PICOLO;
2917 else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0)
2918 type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */
2922 printk("bttv%d: detected by eeprom: %s [card=%d]\n",
2923 btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
2927 static void flyvideo_gpio(struct bttv *btv)
2929 int gpio, has_remote, has_radio, is_capture_only;
2930 int is_lr90, has_tda9820_tda9821;
2931 int tuner_type = UNSET, ttype;
2933 gpio_inout(0xffffff, 0);
2934 udelay(8); /* without this we would see the 0x1800 mask */
2936 /* FIXME: must restore OUR_EN ??? */
2938 /* all cards provide GPIO info, some have an additional eeprom
2939 * LR50: GPIO coding can be found lower right CP1 .. CP9
2940 * CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
2942 * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
2944 * lowest 3 bytes are remote control codes (no handshake needed)
2945 * xxxFFF: No remote control chip soldered
2946 * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
2947 * Note: Some bits are Audio_Mask !
2949 ttype = (gpio & 0x0f0000) >> 16;
2952 tuner_type = 2; /* NTSC, e.g. TPI8NSR11P */
2955 tuner_type = 39; /* LG NTSC (newer TAPC series) TAPC-H701P */
2958 tuner_type = 5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
2961 tuner_type = 37; /* LG PAL (newer TAPC series) TAPC-G702P */
2964 tuner_type = 3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
2967 printk(KERN_INFO "bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv->c.nr);
2971 has_remote = gpio & 0x800000;
2972 has_radio = gpio & 0x400000;
2973 /* unknown 0x200000;
2974 * unknown2 0x100000; */
2975 is_capture_only = !(gpio & 0x008000); /* GPIO15 */
2976 has_tda9820_tda9821 = !(gpio & 0x004000);
2977 is_lr90 = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */
2979 * gpio & 0x001000 output bit for audio routing */
2981 if (is_capture_only)
2982 tuner_type = TUNER_ABSENT; /* No tuner present */
2984 printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
2985 btv->c.nr, has_radio ? "yes" : "no ",
2986 has_remote ? "yes" : "no ", tuner_type, gpio);
2987 printk(KERN_INFO "bttv%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n",
2988 btv->c.nr, is_lr90 ? "yes" : "no ",
2989 has_tda9820_tda9821 ? "yes" : "no ",
2990 is_capture_only ? "yes" : "no ");
2992 if (tuner_type != UNSET) /* only set if known tuner autodetected, else let insmod option through */
2993 btv->tuner_type = tuner_type;
2994 btv->has_radio = has_radio;
2996 /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
2997 * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
2998 * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
2999 if (has_tda9820_tda9821)
3000 btv->audio_mode_gpio = lt9415_audio;
3001 /* todo: if(has_tda9874) btv->audio_mode_gpio = fv2000s_audio; */
3004 static int miro_tunermap[] = { 0,6,2,3, 4,5,6,0, 3,0,4,5, 5,2,16,1,
3005 14,2,17,1, 4,1,4,3, 1,2,16,1, 4,4,4,4 };
3006 static int miro_fmtuner[] = { 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,1,
3007 1,1,1,1, 1,1,1,0, 0,0,0,0, 0,1,0,0 };
3009 static void miro_pinnacle_gpio(struct bttv *btv)
3014 gpio_inout(0xffffff, 0);
3016 id = ((gpio>>10) & 63) -1;
3017 msp = bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx");
3019 btv->tuner_type = miro_tunermap[id];
3020 if (0 == (gpio & 0x20)) {
3022 if (!miro_fmtuner[id]) {
3023 btv->has_matchbox = 1;
3024 btv->mbox_we = (1<<6);
3025 btv->mbox_most = (1<<7);
3026 btv->mbox_clk = (1<<8);
3027 btv->mbox_data = (1<<9);
3028 btv->mbox_mask = (1<<6)|(1<<7)|(1<<8)|(1<<9);
3034 if (btv->c.type == BTTV_BOARD_MIRO)
3035 btv->c.type = BTTV_BOARD_MIROPRO;
3036 if (btv->c.type == BTTV_BOARD_PINNACLE)
3037 btv->c.type = BTTV_BOARD_PINNACLEPRO;
3040 "bttv%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
3041 btv->c.nr, id+1, btv->tuner_type,
3042 !btv->has_radio ? "no" :
3043 (btv->has_matchbox ? "matchbox" : "fmtuner"),
3044 (-1 == msp) ? "no" : "yes");
3046 /* new cards with microtune tuner */
3051 info = "PAL / mono";
3052 btv->tda9887_conf = TDA9887_INTERCARRIER;
3055 info = "PAL+SECAM / stereo";
3057 btv->tda9887_conf = TDA9887_QSS;
3060 info = "NTSC / stereo";
3062 btv->tda9887_conf = TDA9887_QSS;
3065 info = "PAL+SECAM / mono";
3066 btv->tda9887_conf = TDA9887_QSS;
3069 info = "NTSC / mono";
3070 btv->tda9887_conf = TDA9887_INTERCARRIER;
3073 info = "NTSC / stereo";
3074 btv->tda9887_conf = TDA9887_INTERCARRIER;
3077 info = "PAL / stereo";
3078 btv->tda9887_conf = TDA9887_INTERCARRIER;
3081 info = "oops: unknown card";
3085 btv->c.type = BTTV_BOARD_PINNACLEPRO;
3087 "bttv%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
3088 btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
3089 btv->tuner_type = TUNER_MT2032;
3093 /* GPIO21 L: Buffer aktiv, H: Buffer inaktiv */
3094 #define LM1882_SYNC_DRIVE 0x200000L
3096 static void init_ids_eagle(struct bttv *btv)
3098 gpio_inout(0xffffff,0xFFFF37);
3099 gpio_write(0x200020);
3101 /* flash strobe inverter ?! */
3102 gpio_write(0x200024);
3104 /* switch sync drive off */
3105 gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3107 /* set BT848 muxel to 2 */
3108 btaor((2)<<5, ~(2<<5), BT848_IFORM);
3111 /* Muxsel helper for the IDS Eagle.
3112 * the eagles does not use the standard muxsel-bits but
3113 * has its own multiplexer */
3114 static void eagle_muxsel(struct bttv *btv, unsigned int input)
3116 gpio_bits(3, input & 3);
3119 /* set chroma ADC to sleep */
3120 btor(BT848_ADC_C_SLEEP, BT848_ADC);
3121 /* set to composite video */
3122 btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
3123 btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
3125 /* switch sync drive off */
3126 gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3129 static void gvc1100_muxsel(struct bttv *btv, unsigned int input)
3131 static const int masks[] = {0x30, 0x01, 0x12, 0x23};
3132 gpio_write(masks[input%4]);
3135 /* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
3138 GPIObit | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
3139 assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1| | |
3141 IN - sensor inputs, INx - sensor inputs and TI XORed together
3142 O1,O2,O3 - alarm outputs (relays)
3144 OUT ENABLE 1 1 0 . 1 1 0 0 . 0 0 0 0 = 0x6C0
3148 static void init_lmlbt4x(struct bttv *btv)
3150 printk(KERN_DEBUG "LMLBT4x init\n");
3151 btwrite(0x000000, BT848_GPIO_REG_INP);
3152 gpio_inout(0xffffff, 0x0006C0);
3153 gpio_write(0x000000);
3156 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input)
3158 unsigned int inmux = input % 8;
3159 gpio_inout( 0xf, 0xf );
3160 gpio_bits( 0xf, inmux );
3163 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input)
3165 unsigned int inmux = input % 4;
3166 gpio_inout( 3<<9, 3<<9 );
3167 gpio_bits( 3<<9, inmux<<9 );
3170 static void geovision_muxsel(struct bttv *btv, unsigned int input)
3172 unsigned int inmux = input % 16;
3173 gpio_inout(0xf, 0xf);
3174 gpio_bits(0xf, inmux);
3177 /* ----------------------------------------------------------------------- */
3179 static void bttv_reset_audio(struct bttv *btv)
3182 * BT878A has a audio-reset register.
3183 * 1. This register is an audio reset function but it is in
3184 * function-0 (video capture) address space.
3185 * 2. It is enough to do this once per power-up of the card.
3186 * 3. There is a typo in the Conexant doc -- it is not at
3187 * 0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
3188 * --//Shrikumar 030609
3194 printk("bttv%d: BT878A ARESET\n",btv->c.nr);
3195 btwrite((1<<7), 0x058);
3200 /* initialization part one -- before registering i2c bus */
3201 void __devinit bttv_init_card1(struct bttv *btv)
3203 switch (btv->c.type) {
3204 case BTTV_BOARD_HAUPPAUGE:
3205 case BTTV_BOARD_HAUPPAUGE878:
3206 boot_msp34xx(btv,5);
3208 case BTTV_BOARD_VOODOOTV_200:
3209 case BTTV_BOARD_VOODOOTV_FM:
3210 boot_msp34xx(btv,20);
3212 case BTTV_BOARD_AVERMEDIA98:
3213 boot_msp34xx(btv,11);
3215 case BTTV_BOARD_HAUPPAUGEPVR:
3218 case BTTV_BOARD_TWINHAN_DST:
3219 case BTTV_BOARD_AVDVBT_771:
3220 case BTTV_BOARD_PINNACLESAT:
3221 btv->use_i2c_hw = 1;
3223 case BTTV_BOARD_ADLINK_RTV24:
3228 if (!bttv_tvcards[btv->c.type].has_dvb)
3229 bttv_reset_audio(btv);
3232 /* initialization part two -- after registering i2c bus */
3233 void __devinit bttv_init_card2(struct bttv *btv)
3235 int addr=ADDR_UNSET;
3237 btv->tuner_type = UNSET;
3239 if (BTTV_BOARD_UNKNOWN == btv->c.type) {
3240 bttv_readee(btv,eeprom_data,0xa0);
3241 identify_by_eeprom(btv,eeprom_data);
3244 switch (btv->c.type) {
3245 case BTTV_BOARD_MIRO:
3246 case BTTV_BOARD_MIROPRO:
3247 case BTTV_BOARD_PINNACLE:
3248 case BTTV_BOARD_PINNACLEPRO:
3250 miro_pinnacle_gpio(btv);
3252 case BTTV_BOARD_FLYVIDEO_98:
3253 case BTTV_BOARD_MAXI:
3254 case BTTV_BOARD_LIFE_FLYKIT:
3255 case BTTV_BOARD_FLYVIDEO:
3256 case BTTV_BOARD_TYPHOON_TVIEW:
3257 case BTTV_BOARD_CHRONOS_VS2:
3258 case BTTV_BOARD_FLYVIDEO_98FM:
3259 case BTTV_BOARD_FLYVIDEO2000:
3260 case BTTV_BOARD_FLYVIDEO98EZ:
3261 case BTTV_BOARD_CONFERENCETV:
3262 case BTTV_BOARD_LIFETEC_9415:
3265 case BTTV_BOARD_HAUPPAUGE:
3266 case BTTV_BOARD_HAUPPAUGE878:
3267 case BTTV_BOARD_HAUPPAUGEPVR:
3268 /* pick up some config infos from the eeprom */
3269 bttv_readee(btv,eeprom_data,0xa0);
3270 hauppauge_eeprom(btv);
3272 case BTTV_BOARD_AVERMEDIA98:
3273 case BTTV_BOARD_AVPHONE98:
3274 bttv_readee(btv,eeprom_data,0xa0);
3275 avermedia_eeprom(btv);
3277 case BTTV_BOARD_PXC200:
3280 case BTTV_BOARD_PICOLO_TETRA_CHIP:
3281 picolo_tetra_init(btv);
3283 case BTTV_BOARD_VHX:
3285 btv->has_matchbox = 1;
3286 btv->mbox_we = 0x20;
3288 btv->mbox_clk = 0x08;
3289 btv->mbox_data = 0x10;
3290 btv->mbox_mask = 0x38;
3292 case BTTV_BOARD_VOBIS_BOOSTAR:
3293 case BTTV_BOARD_TERRATV:
3294 terratec_active_radio_upgrade(btv);
3296 case BTTV_BOARD_MAGICTVIEW061:
3297 if (btv->cardid == 0x3002144f) {
3299 printk("bttv%d: radio detected by subsystem id (CPH05x)\n",btv->c.nr);
3302 case BTTV_BOARD_STB2:
3303 if (btv->cardid == 0x3060121a) {
3304 /* Fix up entry for 3DFX VoodooTV 100,
3305 which is an OEM STB card variant. */
3307 btv->tuner_type=TUNER_TEMIC_NTSC;
3310 case BTTV_BOARD_OSPREY1x0:
3311 case BTTV_BOARD_OSPREY1x0_848:
3312 case BTTV_BOARD_OSPREY101_848:
3313 case BTTV_BOARD_OSPREY1x1:
3314 case BTTV_BOARD_OSPREY1x1_SVID:
3315 case BTTV_BOARD_OSPREY2xx:
3316 case BTTV_BOARD_OSPREY2x0_SVID:
3317 case BTTV_BOARD_OSPREY2x0:
3318 case BTTV_BOARD_OSPREY440:
3319 case BTTV_BOARD_OSPREY500:
3320 case BTTV_BOARD_OSPREY540:
3321 case BTTV_BOARD_OSPREY2000:
3322 bttv_readee(btv,eeprom_data,0xa0);
3323 osprey_eeprom(btv, eeprom_data);
3325 case BTTV_BOARD_IDS_EAGLE:
3326 init_ids_eagle(btv);
3328 case BTTV_BOARD_MODTEC_205:
3329 bttv_readee(btv,eeprom_data,0xa0);
3332 case BTTV_BOARD_LMLBT4:
3335 case BTTV_BOARD_TIBET_CS16:
3336 tibetCS16_init(btv);
3338 case BTTV_BOARD_KODICOM_4400R:
3339 kodicom4400r_init(btv);
3343 /* pll configuration */
3344 if (!(btv->id==848 && btv->revision==0x11)) {
3345 /* defaults from card list */
3346 if (PLL_28 == bttv_tvcards[btv->c.type].pll) {
3347 btv->pll.pll_ifreq=28636363;
3348 btv->pll.pll_crystal=BT848_IFORM_XT0;
3350 if (PLL_35 == bttv_tvcards[btv->c.type].pll) {
3351 btv->pll.pll_ifreq=35468950;
3352 btv->pll.pll_crystal=BT848_IFORM_XT1;
3354 /* insmod options can override */
3355 switch (pll[btv->c.nr]) {
3357 btv->pll.pll_crystal = 0;
3358 btv->pll.pll_ifreq = 0;
3359 btv->pll.pll_ofreq = 0;
3361 case 1: /* 28 MHz */
3363 btv->pll.pll_ifreq = 28636363;
3364 btv->pll.pll_ofreq = 0;
3365 btv->pll.pll_crystal = BT848_IFORM_XT0;
3367 case 2: /* 35 MHz */
3369 btv->pll.pll_ifreq = 35468950;
3370 btv->pll.pll_ofreq = 0;
3371 btv->pll.pll_crystal = BT848_IFORM_XT1;
3375 btv->pll.pll_current = -1;
3377 /* tuner configuration (from card list / autodetect / insmod option) */
3378 if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
3379 addr = bttv_tvcards[btv->c.type].tuner_addr;
3381 if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
3382 if (UNSET == btv->tuner_type)
3383 btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
3384 if (UNSET != tuner[btv->c.nr])
3385 btv->tuner_type = tuner[btv->c.nr];
3387 if (btv->tuner_type == TUNER_ABSENT)
3388 printk(KERN_INFO "bttv%d: tuner absent\n", btv->c.nr);
3389 else if(btv->tuner_type == UNSET)
3390 printk(KERN_WARNING "bttv%d: tuner type unset\n", btv->c.nr);
3392 printk(KERN_INFO "bttv%d: tuner type=%d\n", btv->c.nr,
3395 if (UNSET == btv->tuner_type)
3396 btv->tuner_type = TUNER_ABSENT;
3398 if (btv->tuner_type != TUNER_ABSENT) {
3399 struct tuner_setup tun_setup;
3401 /* Load tuner module before issuing tuner config call! */
3403 request_module("tuner");
3405 tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
3406 tun_setup.type = btv->tuner_type;
3407 tun_setup.addr = addr;
3409 if (bttv_tvcards[btv->c.type].has_radio)
3410 tun_setup.mode_mask |= T_RADIO;
3412 bttv_call_i2c_clients(btv, TUNER_SET_TYPE_ADDR, &tun_setup);
3415 if (btv->tda9887_conf) {
3416 struct v4l2_priv_tun_config tda9887_cfg;
3418 tda9887_cfg.tuner = TUNER_TDA9887;
3419 tda9887_cfg.priv = &btv->tda9887_conf;
3421 bttv_call_i2c_clients(btv, TUNER_SET_CONFIG, &tda9887_cfg);
3424 btv->dig = bttv_tvcards[btv->c.type].has_dig_in ?
3425 bttv_tvcards[btv->c.type].video_inputs - 1 : UNSET;
3426 btv->svhs = bttv_tvcards[btv->c.type].svhs == NO_SVHS ?
3427 UNSET : bttv_tvcards[btv->c.type].svhs;
3428 if (svhs[btv->c.nr] != UNSET)
3429 btv->svhs = svhs[btv->c.nr];
3430 if (remote[btv->c.nr] != UNSET)
3431 btv->has_remote = remote[btv->c.nr];
3433 if (bttv_tvcards[btv->c.type].has_radio)
3435 if (bttv_tvcards[btv->c.type].has_remote)
3437 if (!bttv_tvcards[btv->c.type].no_gpioirq)
3439 if (bttv_tvcards[btv->c.type].volume_gpio)
3440 btv->volume_gpio=bttv_tvcards[btv->c.type].volume_gpio;
3441 if (bttv_tvcards[btv->c.type].audio_mode_gpio)
3442 btv->audio_mode_gpio=bttv_tvcards[btv->c.type].audio_mode_gpio;
3447 if (btv->tuner_type == TUNER_ABSENT)
3448 return; /* no tuner or related drivers to load */
3450 /* try to detect audio/fader chips */
3451 if (!bttv_tvcards[btv->c.type].no_msp34xx &&
3452 bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx") >=0)
3453 request_module("msp3400");
3455 if (bttv_tvcards[btv->c.type].msp34xx_alt &&
3456 bttv_I2CRead(btv, I2C_ADDR_MSP3400_ALT, "MSP34xx (alternate address)") >=0)
3457 request_module("msp3400");
3459 if (!bttv_tvcards[btv->c.type].no_tda9875 &&
3460 bttv_I2CRead(btv, I2C_ADDR_TDA9875, "TDA9875") >=0)
3461 request_module("tda9875");
3463 if (!bttv_tvcards[btv->c.type].no_tda7432 &&
3464 bttv_I2CRead(btv, I2C_ADDR_TDA7432, "TDA7432") >=0)
3465 request_module("tda7432");
3467 if (bttv_tvcards[btv->c.type].needs_tvaudio)
3468 request_module("tvaudio");
3472 /* ----------------------------------------------------------------------- */
3474 static void modtec_eeprom(struct bttv *btv)
3476 if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
3477 btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
3478 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3479 btv->c.nr,&eeprom_data[0x1e]);
3480 } else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) {
3481 btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I;
3482 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3483 btv->c.nr,&eeprom_data[0x1e]);
3484 } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) {
3485 btv->tuner_type=TUNER_PHILIPS_NTSC;
3486 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3487 btv->c.nr,&eeprom_data[0x1e]);
3489 printk("bttv%d: Modtec: Unknown TunerString: %s\n",
3490 btv->c.nr,&eeprom_data[0x1e]);
3494 static void __devinit hauppauge_eeprom(struct bttv *btv)
3498 tveeprom_hauppauge_analog(&btv->i2c_client, &tv, eeprom_data);
3499 btv->tuner_type = tv.tuner_type;
3500 btv->has_radio = tv.has_radio;
3502 printk("bttv%d: Hauppauge eeprom indicates model#%d\n",
3503 btv->c.nr, tv.model);
3506 * Some of the 878 boards have duplicate PCI IDs. Switch the board
3507 * type based on model #.
3509 if(tv.model == 64900) {
3510 printk("bttv%d: Switching board type from %s to %s\n",
3512 bttv_tvcards[btv->c.type].name,
3513 bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name);
3514 btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB;
3518 static int terratec_active_radio_upgrade(struct bttv *btv)
3523 btv->has_matchbox = 1;
3524 btv->mbox_we = 0x10;
3525 btv->mbox_most = 0x20;
3526 btv->mbox_clk = 0x08;
3527 btv->mbox_data = 0x04;
3528 btv->mbox_mask = 0x3c;
3530 btv->mbox_iow = 1 << 8;
3531 btv->mbox_ior = 1 << 9;
3532 btv->mbox_csel = 1 << 10;
3535 tea5757_write(btv, 5 * freq + 0x358); /* write 0x1ed8 */
3536 if (0x1ed8 == tea5757_read(btv)) {
3537 printk("bttv%d: Terratec Active Radio Upgrade found.\n",
3540 btv->has_matchbox = 1;
3543 btv->has_matchbox = 0;
3549 /* ----------------------------------------------------------------------- */
3552 * minimal bootstrap for the WinTV/PVR -- upload altera firmware.
3554 * The hcwamc.rbf firmware file is on the Hauppauge driver CD. Have
3555 * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be
3556 * unpacked with unzip).
3558 #define PVR_GPIO_DELAY 10
3560 #define BTTV_ALT_DATA 0x000001
3561 #define BTTV_ALT_DCLK 0x100000
3562 #define BTTV_ALT_NCONFIG 0x800000
3564 static int __devinit pvr_altera_load(struct bttv *btv, const u8 *micro,
3571 gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG);
3573 udelay(PVR_GPIO_DELAY);
3575 gpio_write(BTTV_ALT_NCONFIG);
3576 udelay(PVR_GPIO_DELAY);
3578 for (n = 0; n < microlen; n++) {
3580 for (i = 0 ; i < 8 ; i++) {
3581 gpio_bits(BTTV_ALT_DCLK,0);
3583 gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA);
3585 gpio_bits(BTTV_ALT_DATA,0);
3586 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3590 gpio_bits(BTTV_ALT_DCLK,0);
3591 udelay(PVR_GPIO_DELAY);
3593 /* begin Altera init loop (Not necessary,but doesn't hurt) */
3594 for (i = 0 ; i < 30 ; i++) {
3595 gpio_bits(BTTV_ALT_DCLK,0);
3596 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3598 gpio_bits(BTTV_ALT_DCLK,0);
3602 static int __devinit pvr_boot(struct bttv *btv)
3604 const struct firmware *fw_entry;
3607 rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev);
3609 printk(KERN_WARNING "bttv%d: no altera firmware [via hotplug]\n",
3613 rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
3614 printk(KERN_INFO "bttv%d: altera firmware upload %s\n",
3615 btv->c.nr, (rc < 0) ? "failed" : "ok");
3616 release_firmware(fw_entry);
3620 /* ----------------------------------------------------------------------- */
3621 /* some osprey specific stuff */
3623 static void __devinit osprey_eeprom(struct bttv *btv, const u8 ee[256])
3629 /* This code will nevery actually get called in this case.... */
3630 if (btv->c.type == BTTV_BOARD_UNKNOWN) {
3631 /* this might be an antique... check for MMAC label in eeprom */
3632 if (!strncmp(ee, "MMAC", 4)) {
3634 for (i = 0; i < 21; i++)
3636 if (checksum != ee[21])
3638 cardid = BTTV_BOARD_OSPREY1x0_848;
3639 for (i = 12; i < 21; i++)
3640 serial *= 10, serial += ee[i] - '0';
3643 unsigned short type;
3645 for (i = 4*16; i < 8*16; i += 16) {
3646 u16 checksum = ip_compute_csum(ee + i, 16);
3648 if ((checksum&0xff) + (checksum>>8) == 0xff)
3655 /* found a valid descriptor */
3656 type = get_unaligned_be16((__be16 *)(ee+4));
3661 cardid = BTTV_BOARD_OSPREY1x0_848;
3664 cardid = BTTV_BOARD_OSPREY101_848;
3670 cardid = BTTV_BOARD_OSPREY1x0;
3674 cardid = BTTV_BOARD_OSPREY1x1;
3679 cardid = BTTV_BOARD_OSPREY1x1_SVID;
3685 cardid = BTTV_BOARD_OSPREY2xx;
3689 cardid = BTTV_BOARD_OSPREY2x0_SVID;
3692 cardid = BTTV_BOARD_OSPREY500;
3696 cardid = BTTV_BOARD_OSPREY540;
3697 /* bttv_osprey_540_init(btv); */
3702 cardid = BTTV_BOARD_OSPREY2x0;
3703 /* enable output on select control lines */
3704 gpio_inout(0xffffff,0x000303);
3707 cardid = BTTV_BOARD_OSPREY440;
3710 /* unknown...leave generic, but get serial # */
3711 printk(KERN_INFO "bttv%d: "
3712 "osprey eeprom: unknown card type 0x%04x\n",
3716 serial = get_unaligned_be32((__be32 *)(ee+6));
3719 printk(KERN_INFO "bttv%d: osprey eeprom: card=%d '%s' serial=%u\n",
3721 cardid>0 ? bttv_tvcards[cardid].name : "Unknown", serial);
3723 if (cardid<0 || btv->c.type == cardid)
3726 /* card type isn't set correctly */
3727 if (card[btv->c.nr] < bttv_num_tvcards) {
3728 printk(KERN_WARNING "bttv%d: osprey eeprom: "
3729 "Not overriding user specified card type\n", btv->c.nr);
3731 printk(KERN_INFO "bttv%d: osprey eeprom: "
3732 "Changing card type from %d to %d\n", btv->c.nr,
3733 btv->c.type, cardid);
3734 btv->c.type = cardid;
3738 /* ----------------------------------------------------------------------- */
3739 /* AVermedia specific stuff, from bktr_card.c */
3741 static int tuner_0_table[] = {
3742 TUNER_PHILIPS_NTSC, TUNER_PHILIPS_PAL /* PAL-BG*/,
3743 TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL /* PAL-I*/,
3744 TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL,
3745 TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
3746 TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL,
3747 TUNER_PHILIPS_FM1216ME_MK3 };
3749 static int tuner_1_table[] = {
3750 TUNER_TEMIC_NTSC, TUNER_TEMIC_PAL,
3751 TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
3752 TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
3753 TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */
3754 TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
3756 static void __devinit avermedia_eeprom(struct bttv *btv)
3758 int tuner_make, tuner_tv_fm, tuner_format, tuner_type = 0;
3760 tuner_make = (eeprom_data[0x41] & 0x7);
3761 tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3;
3762 tuner_format = (eeprom_data[0x42] & 0xf0) >> 4;
3763 btv->has_remote = (eeprom_data[0x42] & 0x01);
3765 if (tuner_make == 0 || tuner_make == 2)
3766 if (tuner_format <= 0x0a)
3767 tuner_type = tuner_0_table[tuner_format];
3768 if (tuner_make == 1)
3769 if (tuner_format <= 9)
3770 tuner_type = tuner_1_table[tuner_format];
3772 if (tuner_make == 4)
3773 if (tuner_format == 0x09)
3774 tuner_type = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
3776 printk(KERN_INFO "bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
3777 btv->c.nr, eeprom_data[0x41], eeprom_data[0x42]);
3779 btv->tuner_type = tuner_type;
3780 printk(KERN_CONT "%d", tuner_type);
3782 printk(KERN_CONT "Unknown type");
3783 printk(KERN_CONT " radio:%s remote control:%s\n",
3784 tuner_tv_fm ? "yes" : "no",
3785 btv->has_remote ? "yes" : "no");
3789 * For Voodoo TV/FM and Voodoo 200. These cards' tuners use a TDA9880
3790 * analog demod, which is not I2C controlled like the newer and more common
3791 * TDA9887 series. Instead is has two tri-state input pins, S0 and S1,
3792 * that control the IF for the video and audio. Apparently, bttv GPIO
3793 * 0x10000 is connected to S0. S0 low selects a 38.9 MHz VIF for B/G/D/K/I
3794 * (i.e., PAL) while high selects 45.75 MHz for M/N (i.e., NTSC).
3796 u32 bttv_tda9880_setnorm(struct bttv *btv, u32 gpiobits)
3799 if (btv->audio == TVAUDIO_INPUT_TUNER) {
3800 if (bttv_tvnorms[btv->tvnorm].v4l2_id & V4L2_STD_MN)
3801 gpiobits |= 0x10000;
3803 gpiobits &= ~0x10000;
3806 gpio_bits(bttv_tvcards[btv->c.type].gpiomask, gpiobits);
3812 * reset/enable the MSP on some Hauppauge cards
3813 * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)!
3818 static void __devinit boot_msp34xx(struct bttv *btv, int pin)
3820 int mask = (1 << pin);
3822 gpio_inout(mask,mask);
3826 gpio_bits(mask,mask);
3829 bttv_gpio_tracking(btv,"msp34xx");
3831 printk(KERN_INFO "bttv%d: Hauppauge/Voodoo msp34xx: reset line "
3832 "init [%d]\n", btv->c.nr, pin);
3835 /* ----------------------------------------------------------------------- */
3836 /* Imagenation L-Model PXC200 Framegrabber */
3837 /* This is basically the same procedure as
3838 * used by Alessandro Rubini in his pxc200
3839 * driver, but using BTTV functions */
3841 static void __devinit init_PXC200(struct bttv *btv)
3843 static int vals[] __devinitdata = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d,
3844 0x01, 0x02, 0x03, 0x04, 0x05, 0x06,
3850 /* Initialise GPIO-connevted stuff */
3851 gpio_inout(0xffffff, (1<<13));
3855 /* GPIO inputs are pulled up, so no need to drive
3856 * reset pin any longer */
3857 gpio_bits(0xffffff, 0);
3859 bttv_gpio_tracking(btv,"pxc200");
3861 /* we could/should try and reset/control the AD pots? but
3862 right now we simply turned off the crushing. Without
3863 this the AGC drifts drifts
3864 remember the EN is reverse logic -->
3865 setting BT848_ADC_AGC_EN disable the AGC
3866 tboult@eecs.lehigh.edu
3869 btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC);
3871 /* Initialise MAX517 DAC */
3872 printk(KERN_INFO "Setting DAC reference voltage level ...\n");
3873 bttv_I2CWrite(btv,0x5E,0,0x80,1);
3875 /* Initialise 12C508 PIC */
3876 /* The I2CWrite and I2CRead commmands are actually to the
3877 * same chips - but the R/W bit is included in the address
3878 * argument so the numbers are different */
3881 printk(KERN_INFO "Initialising 12C508 PIC chip ...\n");
3883 /* First of all, enable the clock line. This is used in the PXC200-F */
3884 val = btread(BT848_GPIO_DMA_CTL);
3885 val |= BT848_GPIO_DMA_CTL_GPCLKMODE;
3886 btwrite(val, BT848_GPIO_DMA_CTL);
3888 /* Then, push to 0 the reset pin long enough to reset the *
3889 * device same as above for the reset line, but not the same
3890 * value sent to the GPIO-connected stuff
3891 * which one is the good one? */
3892 gpio_inout(0xffffff,(1<<2));
3897 for (i = 0; i < ARRAY_SIZE(vals); i++) {
3898 tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1);
3901 "I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
3902 vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL));
3906 printk(KERN_INFO "PXC200 Initialised.\n");
3911 /* ----------------------------------------------------------------------- */
3913 * The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock
3914 * it. This apparently involves the following procedure for each 878 chip:
3916 * 1) write 0x00C3FEFF to the GPIO_OUT_EN register
3918 * 2) write to GPIO_DATA
3924 * read from GPIO_DATA into buf (uint_32)
3925 * - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 )
3926 * error. ERROR_CPLD_Check_Failed stop.
3928 * 3) write to GPIO_DATA
3929 * - write 0x4400 + 0x0E
3931 * - write 0x4410 + 0x0E
3934 * read from GPIO_DATA into buf (uint_32)
3935 * - if ( buf>>18 & 0x01 ) || ( buf>>19 & 0x01 != 0 )
3936 * error. ERROR_CPLD_Check_Failed.
3938 /* ----------------------------------------------------------------------- */
3940 init_RTV24 (struct bttv *btv)
3942 uint32_t dataRead = 0;
3943 long watchdog_value = 0x0E;
3946 "bttv%d: Adlink RTV-24 initialisation in progress ...\n",
3949 btwrite (0x00c3feff, BT848_GPIO_OUT_EN);
3951 btwrite (0 + watchdog_value, BT848_GPIO_DATA);
3953 btwrite (0x10 + watchdog_value, BT848_GPIO_DATA);
3955 btwrite (0 + watchdog_value, BT848_GPIO_DATA);
3957 dataRead = btread (BT848_GPIO_DATA);
3959 if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) {
3961 "bttv%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
3962 btv->c.nr, dataRead);
3965 btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA);
3967 btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA);
3969 btwrite (watchdog_value, BT848_GPIO_DATA);
3971 dataRead = btread (BT848_GPIO_DATA);
3973 if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) {
3975 "bttv%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
3976 btv->c.nr, dataRead);
3982 "bttv%d: Adlink RTV-24 initialisation complete.\n", btv->c.nr);
3987 /* ----------------------------------------------------------------------- */
3988 /* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports */
3990 * Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu>
3991 * This code is placed under the terms of the GNU General Public License
3993 * Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00
3996 static void bus_low(struct bttv *btv, int bit)
3998 if (btv->mbox_ior) {
3999 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4000 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4007 if (btv->mbox_ior) {
4008 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4013 static void bus_high(struct bttv *btv, int bit)
4015 if (btv->mbox_ior) {
4016 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4017 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4024 if (btv->mbox_ior) {
4025 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4030 static int bus_in(struct bttv *btv, int bit)
4032 if (btv->mbox_ior) {
4033 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4034 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4037 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4040 return gpio_read() & (bit);
4043 /* TEA5757 register bits */
4044 #define TEA_FREQ 0:14
4045 #define TEA_BUFFER 15:15
4047 #define TEA_SIGNAL_STRENGTH 16:17
4049 #define TEA_PORT1 18:18
4050 #define TEA_PORT0 19:19
4052 #define TEA_BAND 20:21
4053 #define TEA_BAND_FM 0
4054 #define TEA_BAND_MW 1
4055 #define TEA_BAND_LW 2
4056 #define TEA_BAND_SW 3
4058 #define TEA_MONO 22:22
4059 #define TEA_ALLOW_STEREO 0
4060 #define TEA_FORCE_MONO 1
4062 #define TEA_SEARCH_DIRECTION 23:23
4063 #define TEA_SEARCH_DOWN 0
4064 #define TEA_SEARCH_UP 1
4066 #define TEA_STATUS 24:24
4067 #define TEA_STATUS_TUNED 0
4068 #define TEA_STATUS_SEARCHING 1
4070 /* Low-level stuff */
4071 static int tea5757_read(struct bttv *btv)
4073 unsigned long timeout;
4077 /* better safe than sorry */
4078 gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we);
4080 if (btv->mbox_ior) {
4081 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4082 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4087 bttv_gpio_tracking(btv,"tea5757 read");
4089 bus_low(btv,btv->mbox_we);
4090 bus_low(btv,btv->mbox_clk);
4093 timeout= jiffies + msecs_to_jiffies(1000);
4095 /* wait for DATA line to go low; error if it doesn't */
4096 while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout))
4098 if (bus_in(btv,btv->mbox_data)) {
4099 printk(KERN_WARNING "bttv%d: tea5757: read timeout\n",btv->c.nr);
4103 dprintk("bttv%d: tea5757:",btv->c.nr);
4104 for (i = 0; i < 24; i++) {
4106 bus_high(btv,btv->mbox_clk);
4108 dprintk("%c",(bus_in(btv,btv->mbox_most) == 0)?'T':'-');
4109 bus_low(btv,btv->mbox_clk);
4111 value |= (bus_in(btv,btv->mbox_data) == 0)?0:1; /* MSB first */
4112 dprintk("%c", (bus_in(btv,btv->mbox_most) == 0)?'S':'M');
4114 dprintk("\nbttv%d: tea5757: read 0x%X\n", btv->c.nr, value);
4118 static int tea5757_write(struct bttv *btv, int value)
4123 gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we | btv->mbox_data);
4125 if (btv->mbox_ior) {
4126 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4127 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4131 bttv_gpio_tracking(btv,"tea5757 write");
4133 dprintk("bttv%d: tea5757: write 0x%X\n", btv->c.nr, value);
4134 bus_low(btv,btv->mbox_clk);
4135 bus_high(btv,btv->mbox_we);
4136 for (i = 0; i < 25; i++) {
4137 if (reg & 0x1000000)
4138 bus_high(btv,btv->mbox_data);
4140 bus_low(btv,btv->mbox_data);
4142 bus_high(btv,btv->mbox_clk);
4144 bus_low(btv,btv->mbox_clk);
4147 bus_low(btv,btv->mbox_we); /* unmute !!! */
4151 void tea5757_set_freq(struct bttv *btv, unsigned short freq)
4153 dprintk("tea5757_set_freq %d\n",freq);
4154 tea5757_write(btv, 5 * freq + 0x358); /* add 10.7MHz (see docs) */
4157 /* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
4159 * This is needed because rv605 don't use a normal multiplex, but a crosspoint
4160 * switch instead (CD22M3494E). This IC can have multiple active connections
4161 * between Xn (input) and Yn (output) pins. We need to clear any existing
4162 * connection prior to establish a new one, pulsing the STROBE pin.
4164 * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
4165 * GPIO pins are wired as:
4166 * GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroller)
4167 * GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroller)
4168 * GPIO[7] - DATA (xpoint) - P1[7] (microcontroller)
4169 * GPIO[8] - - P3[5] (microcontroller)
4170 * GPIO[9] - RESET (xpoint) - P3[6] (microcontroller)
4171 * GPIO[10] - STROBE (xpoint) - P3[7] (microcontroller)
4172 * GPINTR - - P3[4] (microcontroller)
4174 * The microcontroller is a 80C32 like. It should be possible to change xpoint
4175 * configuration either directly (as we are doing) or using the microcontroller
4176 * which is also wired to I2C interface. I have no further info on the
4177 * microcontroller features, one would need to disassembly the firmware.
4178 * note: the vendor refused to give any information on this product, all
4179 * that stuff was found using a multimeter! :)
4181 static void rv605_muxsel(struct bttv *btv, unsigned int input)
4183 static const u8 muxgpio[] = { 0x3, 0x1, 0x2, 0x4, 0xf, 0x7, 0xe, 0x0,
4184 0xd, 0xb, 0xc, 0x6, 0x9, 0x5, 0x8, 0xa };
4186 gpio_bits(0x07f, muxgpio[input]);
4188 /* reset all conections */
4189 gpio_bits(0x200,0x200);
4191 gpio_bits(0x200,0x000);
4194 /* create a new connection */
4195 gpio_bits(0x480,0x480);
4197 gpio_bits(0x480,0x080);
4201 /* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
4203 * The CS16 (available on eBay cheap) is a PCI board with four Fusion
4204 * 878A chips, a PCI bridge, an Atmel microcontroller, four sync seperator
4205 * chips, ten eight input analog multiplexors, a not chip and a few
4208 * 16 inputs on a secondary bracket are provided and can be selected
4209 * from each of the four capture chips. Two of the eight input
4210 * multiplexors are used to select from any of the 16 input signals.
4212 * Unsupported hardware capabilities:
4213 * . A video output monitor on the secondary bracket can be selected from
4214 * one of the 878A chips.
4215 * . Another passthrough but I haven't spent any time investigating it.
4216 * . Digital I/O (logic level connected to GPIO) is available from an
4219 * The on chip input mux should always be set to 2.
4220 * GPIO[16:19] - Video input selection
4221 * GPIO[0:3] - Video output monitor select (only available from one 878A)
4222 * GPIO[?:?] - Digital I/O.
4224 * There is an ATMEL microcontroller with an 8031 core on board. I have not
4225 * determined what function (if any) it provides. With the microcontroller
4226 * and sync seperator chips a guess is that it might have to do with video
4227 * switching and maybe some digital I/O.
4229 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input)
4232 gpio_bits(0x0f0000, input << 16);
4235 static void tibetCS16_init(struct bttv *btv)
4237 /* enable gpio bits, mask obtained via btSpy */
4238 gpio_inout(0xffffff, 0x0f7fff);
4239 gpio_write(0x0f7fff);
4243 * The following routines for the Kodicom-4400r get a little mind-twisting.
4244 * There is a "master" controller and three "slave" controllers, together
4245 * an analog switch which connects any of 16 cameras to any of the BT87A's.
4246 * The analog switch is controlled by the "master", but the detection order
4247 * of the four BT878A chips is in an order which I just don't understand.
4248 * The "master" is actually the second controller to be detected. The
4249 * logic on the board uses logical numbers for the 4 controllers, but
4250 * those numbers are different from the detection sequence. When working
4251 * with the analog switch, we need to "map" from the detection sequence
4252 * over to the board's logical controller number. This mapping sequence
4253 * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical
4254 * unit 3, the second (which is the master) is logical unit 0, etc.
4255 * We need to maintain the status of the analog switch (which of the 16
4256 * cameras is connected to which of the 4 controllers). Rather than
4257 * add to the bttv structure for this, we use the data reserved for
4258 * the mbox (unused for this card type).
4262 * First a routine to set the analog switch, which controls which camera
4263 * is routed to which controller. The switch comprises an X-address
4264 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4265 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4266 * A data value (gpio bit 7) of '1' enables the switch, and '0' disables
4267 * the switch. A STROBE bit (gpio bit 8) latches the data value into the
4268 * specified address. The idea is to set the address and data, then bring
4269 * STROBE high, and finally bring STROBE back to low.
4271 static void kodicom4400r_write(struct bttv *btv,
4272 unsigned char xaddr,
4273 unsigned char yaddr,
4274 unsigned char data) {
4277 udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf);
4278 gpio_bits(0x1ff, udata); /* write ADDR and DAT */
4279 gpio_bits(0x1ff, udata | (1 << 8)); /* strobe high */
4280 gpio_bits(0x1ff, udata); /* strobe low */
4284 * Next the mux select. Both the "master" and "slave" 'cards' (controllers)
4285 * use this routine. The routine finds the "master" for the card, maps
4286 * the controller number from the detected position over to the logical
4287 * number, writes the appropriate data to the analog switch, and housekeeps
4288 * the local copy of the switch information. The parameter 'input' is the
4289 * requested camera number (0 - 15).
4291 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input)
4296 static unsigned char map[4] = {3, 0, 2, 1};
4298 mctlr = master[btv->c.nr];
4299 if (mctlr == NULL) { /* ignore if master not yet detected */
4302 yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */
4304 sw_status = (char *)(&mctlr->mbox_we);
4305 xaddr = input & 0xf;
4306 /* Check if the controller/camera pair has changed, else ignore */
4307 if (sw_status[yaddr] != xaddr)
4309 /* "open" the old switch, "close" the new one, save the new */
4310 kodicom4400r_write(mctlr, sw_status[yaddr], yaddr, 0);
4311 sw_status[yaddr] = xaddr;
4312 kodicom4400r_write(mctlr, xaddr, yaddr, 1);
4317 * During initialisation, we need to reset the analog switch. We
4318 * also preset the switch to map the 4 connectors on the card to the
4319 * *user's* (see above description of kodicom4400r_muxsel) channels
4322 static void kodicom4400r_init(struct bttv *btv)
4324 char *sw_status = (char *)(&btv->mbox_we);
4327 gpio_inout(0x0003ff, 0x0003ff);
4328 gpio_write(1 << 9); /* reset MUX */
4330 /* Preset camera 0 to the 4 controllers */
4331 for (ix = 0; ix < 4; ix++) {
4333 kodicom4400r_write(btv, ix, ix, 1);
4336 * Since this is the "master", we need to set up the
4337 * other three controller chips' pointers to this structure
4338 * for later use in the muxsel routine.
4340 if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3))
4342 master[btv->c.nr-1] = btv;
4343 master[btv->c.nr] = btv;
4344 master[btv->c.nr+1] = btv;
4345 master[btv->c.nr+2] = btv;
4348 /* The Grandtec X-Guard framegrabber card uses two Dual 4-channel
4349 * video multiplexers to provide up to 16 video inputs. These
4350 * multiplexers are controlled by the lower 8 GPIO pins of the
4351 * bt878. The multiplexers probably Pericom PI5V331Q or similar.
4353 * xxx0 is pin xxx of multiplexer U5,
4354 * yyy1 is pin yyy of multiplexer U2
4366 static void xguard_muxsel(struct bttv *btv, unsigned int input)
4368 static const int masks[] = {
4369 ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10,
4370 ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10,
4371 ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11,
4372 ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11,
4374 gpio_write(masks[input%16]);
4376 static void picolo_tetra_init(struct bttv *btv)
4378 /*This is the video input redirection fonctionality : I DID NOT USED IT. */
4379 btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */
4380 btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A] set to 1*/
4382 static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
4385 dprintk (KERN_DEBUG "bttv%d : picolo_tetra_muxsel => input = %d\n",btv->c.nr,input);
4386 /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
4387 /*GPIO[20]&GPIO[21] used to choose the right input*/
4388 btwrite (input<<20,BT848_GPIO_DATA);
4393 * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>]
4395 * The IVC120G security card has 4 i2c controlled TDA8540 matrix
4396 * swichers to provide 16 channels to MUX0. The TDA8540's have
4397 * 4 independent outputs and as such the IVC120G also has the
4398 * optional "Monitor Out" bus. This allows the card to be looking
4399 * at one input while the monitor is looking at another.
4401 * Since I've couldn't be bothered figuring out how to add an
4402 * independant muxsel for the monitor bus, I've just set it to
4403 * whatever the card is looking at.
4405 * OUT0 of the TDA8540's is connected to MUX0 (0x03)
4406 * OUT1 of the TDA8540's is connected to "Monitor Out" (0x0C)
4408 * TDA8540_ALT3 IN0-3 = Channel 13 - 16 (0x03)
4409 * TDA8540_ALT4 IN0-3 = Channel 1 - 4 (0x03)
4410 * TDA8540_ALT5 IN0-3 = Channel 5 - 8 (0x03)
4411 * TDA8540_ALT6 IN0-3 = Channel 9 - 12 (0x03)
4415 /* All 7 possible sub-ids for the TDA8540 Matrix Switcher */
4416 #define I2C_TDA8540 0x90
4417 #define I2C_TDA8540_ALT1 0x92
4418 #define I2C_TDA8540_ALT2 0x94
4419 #define I2C_TDA8540_ALT3 0x96
4420 #define I2C_TDA8540_ALT4 0x98
4421 #define I2C_TDA8540_ALT5 0x9a
4422 #define I2C_TDA8540_ALT6 0x9c
4424 static void ivc120_muxsel(struct bttv *btv, unsigned int input)
4427 int key = input % 4;
4428 int matrix = input / 4;
4430 dprintk("bttv%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
4431 btv->c.nr, input, matrix, key);
4433 /* Handles the input selection on the TDA8540's */
4434 bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00,
4435 ((matrix == 3) ? (key | key << 2) : 0x00), 1);
4436 bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00,
4437 ((matrix == 0) ? (key | key << 2) : 0x00), 1);
4438 bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00,
4439 ((matrix == 1) ? (key | key << 2) : 0x00), 1);
4440 bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00,
4441 ((matrix == 2) ? (key | key << 2) : 0x00), 1);
4443 /* Handles the output enables on the TDA8540's */
4444 bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02,
4445 ((matrix == 3) ? 0x03 : 0x00), 1); /* 13 - 16 */
4446 bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02,
4447 ((matrix == 0) ? 0x03 : 0x00), 1); /* 1-4 */
4448 bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02,
4449 ((matrix == 1) ? 0x03 : 0x00), 1); /* 5-8 */
4450 bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02,
4451 ((matrix == 2) ? 0x03 : 0x00), 1); /* 9-12 */
4453 /* 878's MUX0 is already selected for input via muxsel values */
4457 /* PXC200 muxsel helper
4458 * luke@syseng.anu.edu.au
4459 * another transplant
4460 * from Alessandro Rubini (rubini@linux.it)
4462 * There are 4 kinds of cards:
4463 * PXC200L which is bt848
4464 * PXC200F which is bt848 with PIC controlling mux
4465 * PXC200AL which is bt878
4466 * PXC200AF which is bt878 with PIC controlling mux
4468 #define PX_CFG_PXC200F 0x01
4469 #define PX_FLAG_PXC200A 0x00001000 /* a pxc200A is bt-878 based */
4470 #define PX_I2C_PIC 0x0f
4471 #define PX_PXC200A_CARDID 0x200a1295
4472 #define PX_I2C_CMD_CFG 0x00
4474 static void PXC200_muxsel(struct bttv *btv, unsigned int input)
4479 unsigned char buf[2];
4481 /* Read PIC config to determine if this is a PXC200F */
4485 rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1);
4487 printk(KERN_DEBUG "bttv%d: PXC200_muxsel: pic cfg write failed:%d\n", btv->c.nr,rc);
4488 /* not PXC ? do nothing */
4492 rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL);
4493 if (!(rc & PX_CFG_PXC200F)) {
4494 printk(KERN_DEBUG "bttv%d: PXC200_muxsel: not PXC200F rc:%d \n", btv->c.nr,rc);
4499 /* The multiplexer in the 200F is handled by the GPIO port */
4500 /* get correct mapping between inputs */
4501 /* mux = bttv_tvcards[btv->type].muxsel[input] & 3; */
4502 /* ** not needed!? */
4505 /* make sure output pins are enabled */
4506 /* bitmask=0x30f; */
4508 /* check whether we have a PXC200A */
4509 if (btv->cardid == PX_PXC200A_CARDID) {
4510 bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */
4511 bitmask |= 7<<4; /* the DAC */
4513 btwrite(bitmask, BT848_GPIO_OUT_EN);
4515 bitmask = btread(BT848_GPIO_DATA);
4516 if (btv->cardid == PX_PXC200A_CARDID)
4517 bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7);
4518 else /* older device */
4519 bitmask = (bitmask & ~0x300) | ((mux & 3) << 8);
4520 btwrite(bitmask,BT848_GPIO_DATA);
4523 * Was "to be safe, set the bt848 to input 0"
4524 * Actually, since it's ok at load time, better not messing
4525 * with these bits (on PXC200AF you need to set mux 2 here)
4527 * needed because bttv-driver sets mux before calling this function
4529 if (btv->cardid == PX_PXC200A_CARDID)
4530 btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM);
4531 else /* older device */
4532 btand(~BT848_IFORM_MUXSEL,BT848_IFORM);
4534 printk(KERN_DEBUG "bttv%d: setting input channel to:%d\n", btv->c.nr,(int)mux);
4537 static void phytec_muxsel(struct bttv *btv, unsigned int input)
4539 unsigned int mux = input % 4;
4541 if (input == btv->svhs)
4544 gpio_bits(0x3, mux);
4547 /* ----------------------------------------------------------------------- */
4548 /* motherboard chipset specific stuff */
4550 void __init bttv_check_chipset(void)
4552 int pcipci_fail = 0;
4553 struct pci_dev *dev = NULL;
4555 if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL)) /* should check if target is AGP */
4557 if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF))
4559 if (pci_pci_problems & PCIPCI_VSFX)
4561 #ifdef PCIPCI_ALIMAGIK
4562 if (pci_pci_problems & PCIPCI_ALIMAGIK)
4567 /* print warnings about any quirks found */
4569 printk(KERN_INFO "bttv: Host bridge needs ETBF enabled.\n");
4571 printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n");
4573 printk(KERN_INFO "bttv: bttv and your chipset may not work "
4576 printk(KERN_INFO "bttv: overlay will be disabled.\n");
4579 printk(KERN_INFO "bttv: overlay forced. Use this "
4580 "option at your own risk.\n");
4583 if (UNSET != latency)
4584 printk(KERN_INFO "bttv: pci latency fixup [%d]\n",latency);
4585 while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL,
4586 PCI_DEVICE_ID_INTEL_82441, dev))) {
4588 pci_read_config_byte(dev, 0x53, &b);
4590 printk(KERN_INFO "bttv: Host bridge: 82441FX Natoma, "
4591 "bufcon=0x%02x\n",b);
4595 int __devinit bttv_handle_chipset(struct bttv *btv)
4597 unsigned char command;
4599 if (!triton1 && !vsfx && UNSET == latency)
4604 printk(KERN_INFO "bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv->c.nr);
4605 if (vsfx && btv->id >= 878)
4606 printk(KERN_INFO "bttv%d: enabling VSFX\n",btv->c.nr);
4607 if (UNSET != latency)
4608 printk(KERN_INFO "bttv%d: setting pci timer to %d\n",
4612 if (btv->id < 878) {
4613 /* bt848 (mis)uses a bit in the irq mask for etbf */
4615 btv->triton1 = BT848_INT_ETBF;
4617 /* bt878 has a bit in the pci config space for it */
4618 pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command);
4620 command |= BT878_EN_TBFX;
4622 command |= BT878_EN_VSFX;
4623 pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command);
4625 if (UNSET != latency)
4626 pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency);