2 # Generic video config states
7 depends on VIDEO_DEV && VIDEO_V4L2_COMMON
8 default VIDEO_DEV && VIDEO_V4L2_COMMON
12 depends on VIDEO_DEV && VIDEO_V4L2_COMMON && VIDEO_ALLOW_V4L1
13 default VIDEO_DEV && VIDEO_V4L2_COMMON && VIDEO_ALLOW_V4L1
18 config VIDEOBUF_DMA_SG
23 config VIDEOBUF_VMALLOC
27 config VIDEOBUF_DMA_CONTIG
50 depends on MEDIA_TUNER
53 # Multimedia Video device configuration
56 menuconfig VIDEO_CAPTURE_DRIVERS
57 bool "Video capture adapters"
61 Say Y here to enable selecting the video adapters for
62 webcams, analog TV, and hybrid analog/digital TV.
63 Some of those devices also supports FM radio.
65 if VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2
67 config VIDEO_ADV_DEBUG
68 bool "Enable advanced debug functionality"
71 Say Y here to enable advanced debugging functionality on some
75 config VIDEO_FIXED_MINOR_RANGES
76 bool "Enable old-style fixed minor ranges for video devices"
79 Say Y here to enable the old-style fixed-range minor assignments.
80 Only useful if you rely on the old behavior and use mknod instead of udev.
84 config VIDEO_HELPER_CHIPS_AUTO
85 bool "Autoselect pertinent encoders/decoders and other helper chips"
88 Most video cards may require additional modules to encode or
89 decode audio/video standards. This option will autoselect
90 all pertinent modules to each selected video module.
92 Unselect this only if you know exactly what you are doing, since
93 it may break support on some boards.
98 tristate "I2C module for IR" if !VIDEO_HELPER_CHIPS_AUTO
99 depends on I2C && VIDEO_IR
102 Most boards have an IR chip directly connected via GPIO. However,
103 some video boards have the IR connected via I2C bus.
105 If your board doesn't have an I2C IR chip, you may disable this
111 # Encoder / Decoder module configuration
114 menu "Encoders/decoders and other helper chips"
115 depends on !VIDEO_HELPER_CHIPS_AUTO
117 comment "Audio decoders"
120 tristate "Simple audio decoder chips"
121 depends on VIDEO_V4L2 && I2C
123 Support for several audio decoder chips found on some bt8xx boards:
124 Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300,
125 tea6320, tea6420, tda8425, ta8874z.
126 Microchip: pic16c54 based design on ProVideo PV951 board.
128 To compile this driver as a module, choose M here: the
129 module will be called tvaudio.
132 tristate "Philips TDA7432 audio processor"
133 depends on VIDEO_V4L2 && I2C
135 Support for tda7432 audio decoder chip found on some bt8xx boards.
137 To compile this driver as a module, choose M here: the
138 module will be called tda7432.
141 tristate "Philips TDA9840 audio processor"
144 Support for tda9840 audio decoder chip found on some Zoran boards.
146 To compile this driver as a module, choose M here: the
147 module will be called tda9840.
150 tristate "Philips TDA9875 audio processor"
151 depends on VIDEO_V4L2 && I2C
153 Support for tda9875 audio decoder chip found on some bt8xx boards.
155 To compile this driver as a module, choose M here: the
156 module will be called tda9875.
158 config VIDEO_TEA6415C
159 tristate "Philips TEA6415C audio processor"
162 Support for tea6415c audio decoder chip found on some bt8xx boards.
164 To compile this driver as a module, choose M here: the
165 module will be called tea6415c.
168 tristate "Philips TEA6420 audio processor"
171 Support for tea6420 audio decoder chip found on some bt8xx boards.
173 To compile this driver as a module, choose M here: the
174 module will be called tea6420.
177 tristate "Micronas MSP34xx audio decoders"
178 depends on VIDEO_V4L2 && I2C
180 Support for the Micronas MSP34xx series of audio decoders.
182 To compile this driver as a module, choose M here: the
183 module will be called msp3400.
186 tristate "Cirrus Logic CS5345 audio ADC"
187 depends on VIDEO_V4L2 && I2C
189 Support for the Cirrus Logic CS5345 24-bit, 192 kHz
190 stereo A/D converter.
192 To compile this driver as a module, choose M here: the
193 module will be called cs5345.
195 config VIDEO_CS53L32A
196 tristate "Cirrus Logic CS53L32A audio ADC"
197 depends on VIDEO_V4L2 && I2C
199 Support for the Cirrus Logic CS53L32A low voltage
200 stereo A/D converter.
202 To compile this driver as a module, choose M here: the
203 module will be called cs53l32a.
206 tristate "Mitsubishi M52790 A/V switch"
207 depends on VIDEO_V4L2 && I2C
209 Support for the Mitsubishi M52790 A/V switch.
211 To compile this driver as a module, choose M here: the
212 module will be called m52790.
214 config VIDEO_TLV320AIC23B
215 tristate "Texas Instruments TLV320AIC23B audio codec"
216 depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
218 Support for the Texas Instruments TLV320AIC23B audio codec.
220 To compile this driver as a module, choose M here: the
221 module will be called tlv320aic23b.
224 tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
225 depends on VIDEO_V4L2 && I2C
227 Support for the Wolfson Microelectronics WM8775 high
228 performance stereo A/D Converter with a 4 channel input mixer.
230 To compile this driver as a module, choose M here: the
231 module will be called wm8775.
234 tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
235 depends on VIDEO_V4L2 && I2C
237 Support for the Wolfson Microelectronics WM8739
238 stereo A/D Converter.
240 To compile this driver as a module, choose M here: the
241 module will be called wm8739.
243 config VIDEO_VP27SMPX
244 tristate "Panasonic VP27s internal MPX"
245 depends on VIDEO_V4L2 && I2C
247 Support for the internal MPX of the Panasonic VP27s tuner.
249 To compile this driver as a module, choose M here: the
250 module will be called vp27smpx.
252 comment "RDS decoders"
255 tristate "SAA6588 Radio Chip RDS decoder support"
256 depends on VIDEO_V4L2 && I2C
259 Support for this Radio Data System (RDS) decoder. This allows
260 seeing radio station identification transmitted using this
263 To compile this driver as a module, choose M here: the
264 module will be called saa6588.
266 comment "Video decoders"
269 tristate "BT819A VideoStream decoder"
270 depends on VIDEO_V4L2 && I2C
272 Support for BT819A video decoder.
274 To compile this driver as a module, choose M here: the
275 module will be called bt819.
278 tristate "BT856 VideoStream decoder"
279 depends on VIDEO_V4L2 && I2C
281 Support for BT856 video decoder.
283 To compile this driver as a module, choose M here: the
284 module will be called bt856.
287 tristate "BT866 VideoStream decoder"
288 depends on VIDEO_V4L2 && I2C
290 Support for BT866 video decoder.
292 To compile this driver as a module, choose M here: the
293 module will be called bt866.
296 tristate "KS0127 video decoder"
297 depends on VIDEO_V4L2 && I2C
299 Support for KS0127 video decoder.
301 This chip is used on AverMedia AVS6EYES Zoran-based MJPEG
304 To compile this driver as a module, choose M here: the
305 module will be called ks0127.
308 tristate "OmniVision OV7670 sensor support"
309 depends on I2C && VIDEO_V4L2
311 This is a Video4Linux2 sensor-level driver for the OmniVision
312 OV7670 VGA camera. It currently only works with the M88ALP01
316 tristate "Micron mt9v011 sensor support"
317 depends on I2C && VIDEO_V4L2
319 This is a Video4Linux2 sensor-level driver for the Micron
320 mt0v011 1.3 Mpixel camera. It currently only works with the
324 tristate "TCM825x camera sensor support"
325 depends on I2C && VIDEO_V4L2
327 This is a driver for the Toshiba TCM825x VGA camera sensor.
328 It is used for example in Nokia N800.
331 tristate "Philips SAA7110 video decoder"
332 depends on VIDEO_V4L2 && I2C
334 Support for the Philips SAA7110 video decoders.
336 To compile this driver as a module, choose M here: the
337 module will be called saa7110.
340 tristate "Philips SAA7111/3/4/5 video decoders"
341 depends on VIDEO_V4L2 && I2C
343 Support for the Philips SAA7111/3/4/5 video decoders.
345 To compile this driver as a module, choose M here: the
346 module will be called saa7115.
349 tristate "Philips SAA7171/3/4 audio/video decoders"
350 depends on VIDEO_V4L2 && I2C
352 Support for the Philips SAA7171/3/4 audio/video decoders.
354 To compile this driver as a module, choose M here: the
355 module will be called saa717x.
358 tristate "Philips SAA7191 video decoder"
359 depends on VIDEO_V4L1 && I2C
361 Support for the Philips SAA7191 video decoder.
363 To compile this driver as a module, choose M here: the
364 module will be called saa7191.
367 tristate "Texas Instruments TVP514x video decoder"
368 depends on VIDEO_V4L2 && I2C
370 This is a Video4Linux2 sensor-level driver for the TI TVP5146/47
371 decoder. It is currently working with the TI OMAP3 camera
374 To compile this driver as a module, choose M here: the
375 module will be called tvp514x.
378 tristate "Texas Instruments TVP5150 video decoder"
379 depends on VIDEO_V4L2 && I2C
381 Support for the Texas Instruments TVP5150 video decoder.
383 To compile this driver as a module, choose M here: the
384 module will be called tvp5150.
387 tristate "vpx3220a, vpx3216b & vpx3214c video decoders"
388 depends on VIDEO_V4L2 && I2C
390 Support for VPX322x video decoders.
392 To compile this driver as a module, choose M here: the
393 module will be called vpx3220.
395 comment "Video and audio decoders"
397 source "drivers/media/video/cx25840/Kconfig"
399 comment "MPEG video encoders"
402 tristate "Conexant CX2341x MPEG encoders"
403 depends on VIDEO_V4L2 && VIDEO_V4L2_COMMON
405 Support for the Conexant CX23416 MPEG encoders
406 and CX23415 MPEG encoder/decoders.
408 This module currently supports the encoding functions only.
410 To compile this driver as a module, choose M here: the
411 module will be called cx2341x.
413 comment "Video encoders"
416 tristate "Philips SAA7127/9 digital video encoders"
417 depends on VIDEO_V4L2 && I2C
419 Support for the Philips SAA7127/9 digital video encoders.
421 To compile this driver as a module, choose M here: the
422 module will be called saa7127.
425 tristate "Philips SAA7185 video encoder"
426 depends on VIDEO_V4L2 && I2C
428 Support for the Philips SAA7185 video encoder.
430 To compile this driver as a module, choose M here: the
431 module will be called saa7185.
434 tristate "Analog Devices ADV7170 video encoder"
435 depends on VIDEO_V4L2 && I2C
437 Support for the Analog Devices ADV7170 video encoder driver
439 To compile this driver as a module, choose M here: the
440 module will be called adv7170.
443 tristate "Analog Devices ADV7175 video encoder"
444 depends on VIDEO_V4L2 && I2C
446 Support for the Analog Devices ADV7175 video encoder driver
448 To compile this driver as a module, choose M here: the
449 module will be called adv7175.
452 tristate "THS7303 Video Amplifier"
455 Support for TI THS7303 video amplifier
457 To compile this driver as a module, choose M here: the
458 module will be called ths7303.
461 tristate "ADV7343 video encoder"
464 Support for Analog Devices I2C bus based ADV7343 encoder.
466 To compile this driver as a module, choose M here: the
467 module will be called adv7343.
469 comment "Video improvement chips"
471 config VIDEO_UPD64031A
472 tristate "NEC Electronics uPD64031A Ghost Reduction"
473 depends on VIDEO_V4L2 && I2C
475 Support for the NEC Electronics uPD64031A Ghost Reduction
476 video chip. It is most often found in NTSC TV cards made for
477 Japan and is used to reduce the 'ghosting' effect that can
478 be present in analog TV broadcasts.
480 To compile this driver as a module, choose M here: the
481 module will be called upd64031a.
483 config VIDEO_UPD64083
484 tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
485 depends on VIDEO_V4L2 && I2C
487 Support for the NEC Electronics uPD64083 3-Dimensional Y/C
488 separation video chip. It is used to improve the quality of
489 the colors of a composite signal.
491 To compile this driver as a module, choose M here: the
492 module will be called upd64083.
494 endmenu # encoder / decoder chips
497 tristate "Virtual Video Driver"
498 depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64
499 select VIDEOBUF_VMALLOC
502 Enables a virtual video driver. This device shows a color bar
503 and a timestamp, as a real device would generate by using V4L2
505 Say Y here if you want to test video apps or debug V4L devices.
508 source "drivers/media/video/bt8xx/Kconfig"
511 tristate "Mediavision Pro Movie Studio Video For Linux"
512 depends on ISA && VIDEO_V4L1
514 Say Y if you have such a thing.
516 To compile this driver as a module, choose M here: the
517 module will be called pms.
520 tristate "Quickcam BW Video For Linux"
521 depends on PARPORT && VIDEO_V4L1
523 Say Y have if you the black and white version of the QuickCam
524 camera. See the next option for the color version.
526 To compile this driver as a module, choose M here: the
527 module will be called bw-qcam.
530 tristate "QuickCam Colour Video For Linux (EXPERIMENTAL)"
531 depends on EXPERIMENTAL && PARPORT && VIDEO_V4L1
533 This is the video4linux driver for the colour version of the
534 Connectix QuickCam. If you have one of these cameras, say Y here,
535 otherwise say N. This driver does not work with the original
536 monochrome QuickCam, QuickCam VC or QuickClip. It is also available
537 as a module (c-qcam).
538 Read <file:Documentation/video4linux/CQcam.txt> for more information.
541 tristate "W9966CF Webcam (FlyCam Supra and others) Video For Linux"
542 depends on PARPORT_1284 && PARPORT && VIDEO_V4L1
544 Video4linux driver for Winbond's w9966 based Webcams.
545 Currently tested with the LifeView FlyCam Supra.
546 If you have one of these cameras, say Y here
548 This driver is also available as a module (w9966).
550 Check out <file:Documentation/video4linux/w9966.txt> for more
554 tristate "CPiA Video For Linux"
555 depends on VIDEO_V4L1
557 This is the video4linux driver for cameras based on Vision's CPiA
558 (Colour Processor Interface ASIC), such as the Creative Labs Video
559 Blaster Webcam II. If you have one of these cameras, say Y here
560 and select parallel port and/or USB lowlevel support below,
561 otherwise say N. This will not work with the Creative Webcam III.
563 Please read <file:Documentation/video4linux/README.cpia> for more
566 This driver is also available as a module (cpia).
569 tristate "CPiA Parallel Port Lowlevel Support"
570 depends on PARPORT_1284 && VIDEO_CPIA && PARPORT
572 This is the lowlevel parallel port support for cameras based on
573 Vision's CPiA (Colour Processor Interface ASIC), such as the
574 Creative Webcam II. If you have the parallel port version of one
575 of these cameras, say Y here, otherwise say N. It is also available
576 as a module (cpia_pp).
578 config VIDEO_CPIA_USB
579 tristate "CPiA USB Lowlevel Support"
580 depends on VIDEO_CPIA && USB
582 This is the lowlevel USB support for cameras based on Vision's CPiA
583 (Colour Processor Interface ASIC), such as the Creative Webcam II.
584 If you have the USB version of one of these cameras, say Y here,
585 otherwise say N. This will not work with the Creative Webcam III.
586 It is also available as a module (cpia_usb).
588 source "drivers/media/video/cpia2/Kconfig"
590 config VIDEO_SAA5246A
591 tristate "SAA5246A, SAA5281 Teletext processor"
592 depends on I2C && VIDEO_V4L2
594 Support for I2C bus based teletext using the SAA5246A or SAA5281
595 chip. Useful only if you live in Europe.
597 To compile this driver as a module, choose M here: the
598 module will be called saa5246a.
601 tristate "SAA5249 Teletext processor"
602 depends on I2C && VIDEO_V4L2
604 Support for I2C bus based teletext using the SAA5249 chip. At the
605 moment this is only useful on some European WinTV cards.
607 To compile this driver as a module, choose M here: the
608 module will be called saa5249.
611 tristate "SGI Vino Video For Linux (EXPERIMENTAL)"
612 depends on I2C && SGI_IP22 && EXPERIMENTAL && VIDEO_V4L2
613 select VIDEO_SAA7191 if VIDEO_HELPER_CHIPS_AUTO
615 Say Y here to build in support for the Vino video input system found
616 on SGI Indy machines.
619 tristate "Stradis 4:2:2 MPEG-2 video driver (EXPERIMENTAL)"
620 depends on EXPERIMENTAL && PCI && VIDEO_V4L1 && VIRT_TO_BUS
622 Say Y here to enable support for the Stradis 4:2:2 MPEG-2 video
623 driver for PCI. There is a product page at
624 <http://www.stradis.com/>.
626 source "drivers/media/video/zoran/Kconfig"
629 tristate "Sony Vaio Picturebook Motion Eye Video For Linux"
630 depends on PCI && SONY_LAPTOP && VIDEO_V4L1
632 This is the video4linux driver for the Motion Eye camera found
633 in the Vaio Picturebook laptops. Please read the material in
634 <file:Documentation/video4linux/meye.txt> for more information.
636 If you say Y or M here, you need to say Y or M to "Sony Laptop
637 Extras" in the misc device section.
639 To compile this driver as a module, choose M here: the
640 module will be called meye.
642 source "drivers/media/video/saa7134/Kconfig"
645 tristate "Siemens-Nixdorf 'Multimedia eXtension Board'"
646 depends on PCI && VIDEO_V4L1 && I2C
647 select VIDEO_SAA7146_VV
649 select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO
650 select VIDEO_TDA9840 if VIDEO_HELPER_CHIPS_AUTO
651 select VIDEO_TEA6415C if VIDEO_HELPER_CHIPS_AUTO
652 select VIDEO_TEA6420 if VIDEO_HELPER_CHIPS_AUTO
654 This is a video4linux driver for the 'Multimedia eXtension Board'
655 TV card by Siemens-Nixdorf.
657 To compile this driver as a module, choose M here: the
658 module will be called mxb.
660 config VIDEO_HEXIUM_ORION
661 tristate "Hexium HV-PCI6 and Orion frame grabber"
662 depends on PCI && VIDEO_V4L2 && I2C
663 select VIDEO_SAA7146_VV
665 This is a video4linux driver for the Hexium HV-PCI6 and
666 Orion frame grabber cards by Hexium.
668 To compile this driver as a module, choose M here: the
669 module will be called hexium_orion.
671 config VIDEO_HEXIUM_GEMINI
672 tristate "Hexium Gemini frame grabber"
673 depends on PCI && VIDEO_V4L2 && I2C
674 select VIDEO_SAA7146_VV
676 This is a video4linux driver for the Hexium Gemini frame
677 grabber card by Hexium. Please note that the Gemini Dual
678 card is *not* fully supported.
680 To compile this driver as a module, choose M here: the
681 module will be called hexium_gemini.
683 source "drivers/media/video/cx88/Kconfig"
685 source "drivers/media/video/cx23885/Kconfig"
687 source "drivers/media/video/au0828/Kconfig"
689 source "drivers/media/video/ivtv/Kconfig"
691 source "drivers/media/video/cx18/Kconfig"
694 tristate "AR devices"
695 depends on M32R && VIDEO_V4L1
697 This is a video4linux driver for the Renesas AR (Artificial Retina)
700 config VIDEO_M32R_AR_M64278
701 tristate "AR device with color module M64278(VGA)"
702 depends on PLAT_M32700UT
705 This is a video4linux driver for the Renesas AR (Artificial
706 Retina) with M64278E-800 camera module.
707 This module supports VGA(640x480 pixels) resolutions.
709 To compile this driver as a module, choose M here: the
710 module will be called arv.
712 config VIDEO_CAFE_CCIC
713 tristate "Marvell 88ALP01 (Cafe) CMOS Camera Controller support"
714 depends on PCI && I2C && VIDEO_V4L2
717 This is a video4linux2 driver for the Marvell 88ALP01 integrated
718 CMOS camera controller. This is the controller found on first-
719 generation OLPC systems.
722 tristate "SoC camera support"
723 depends on VIDEO_V4L2 && HAS_DMA && I2C
726 SoC Camera is a common API to several cameras, not connecting
727 over a bus like PCI or USB. For example some i2c camera connected
728 directly to the data bus of an SoC.
730 config SOC_CAMERA_MT9M001
731 tristate "mt9m001 support"
732 depends on SOC_CAMERA && I2C
733 select GPIO_PCA953X if MT9M001_PCA9536_SWITCH
735 This driver supports MT9M001 cameras from Micron, monochrome
738 config SOC_CAMERA_MT9M111
739 tristate "mt9m111 and mt9m112 support"
740 depends on SOC_CAMERA && I2C
742 This driver supports MT9M111 and MT9M112 cameras from Micron
744 config SOC_CAMERA_MT9T031
745 tristate "mt9t031 support"
746 depends on SOC_CAMERA && I2C
748 This driver supports MT9T031 cameras from Micron.
750 config SOC_CAMERA_MT9V022
751 tristate "mt9v022 support"
752 depends on SOC_CAMERA && I2C
753 select GPIO_PCA953X if MT9V022_PCA9536_SWITCH
755 This driver supports MT9V022 cameras from Micron
757 config SOC_CAMERA_TW9910
758 tristate "tw9910 support"
759 depends on SOC_CAMERA && I2C
761 This is a tw9910 video driver
763 config SOC_CAMERA_PLATFORM
764 tristate "platform camera support"
765 depends on SOC_CAMERA
767 This is a generic SoC camera platform driver, useful for testing
769 config SOC_CAMERA_OV772X
770 tristate "ov772x camera support"
771 depends on SOC_CAMERA && I2C
773 This is a ov772x camera driver
779 tristate "i.MX1/i.MXL CMOS Sensor Interface driver"
780 depends on VIDEO_DEV && ARCH_MX1 && SOC_CAMERA
782 select VIDEOBUF_DMA_CONTIG
785 This is a v4l2 driver for the i.MX1/i.MXL CMOS Sensor Interface
791 tristate "i.MX3x Camera Sensor Interface driver"
792 depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA
793 select VIDEOBUF_DMA_CONTIG
796 This is a v4l2 driver for the i.MX3x Camera Sensor Interface
799 tristate "PXA27x Quick Capture Interface driver"
800 depends on VIDEO_DEV && PXA27x && SOC_CAMERA
801 select VIDEOBUF_DMA_SG
803 This is a v4l2 driver for the PXA27x Quick Capture Interface
805 config VIDEO_SH_MOBILE_CEU
806 tristate "SuperH Mobile CEU Interface driver"
807 depends on VIDEO_DEV && SOC_CAMERA && HAS_DMA && HAVE_CLK
808 select VIDEOBUF_DMA_CONTIG
810 This is a v4l2 driver for the SuperH Mobile CEU Interface
813 tristate "OMAP2 Camera Capture Interface driver"
814 depends on VIDEO_DEV && ARCH_OMAP2
815 select VIDEOBUF_DMA_SG
817 This is a v4l2 driver for the TI OMAP2 camera capture interface
820 # USB Multimedia device configuration
823 menuconfig V4L_USB_DRIVERS
824 bool "V4L USB devices"
828 if V4L_USB_DRIVERS && USB
830 source "drivers/media/video/uvc/Kconfig"
832 source "drivers/media/video/gspca/Kconfig"
834 source "drivers/media/video/pvrusb2/Kconfig"
836 source "drivers/media/video/hdpvr/Kconfig"
838 source "drivers/media/video/em28xx/Kconfig"
840 source "drivers/media/video/cx231xx/Kconfig"
842 source "drivers/media/video/usbvision/Kconfig"
844 source "drivers/media/video/usbvideo/Kconfig"
846 source "drivers/media/video/et61x251/Kconfig"
848 config VIDEO_OVCAMCHIP
849 tristate "OmniVision Camera Chip support"
850 depends on I2C && VIDEO_V4L1
852 Support for the OmniVision OV6xxx and OV7xxx series of camera chips.
853 This driver is intended to be used with the ov511 and w9968cf USB
856 To compile this driver as a module, choose M here: the
857 module will be called ovcamchip.
860 tristate "USB W996[87]CF JPEG Dual Mode Camera support"
861 depends on VIDEO_V4L1 && I2C && VIDEO_OVCAMCHIP
863 Say Y here if you want support for cameras based on OV681 or
864 Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips.
866 This driver has an optional plugin, which is distributed as a
867 separate module only (released under GPL). It allows to use higher
868 resolutions and framerates, but cannot be included in the official
869 Linux kernel for performance purposes.
871 See <file:Documentation/video4linux/w9968cf.txt> for more info.
873 To compile this driver as a module, choose M here: the
874 module will be called w9968cf.
877 tristate "USB OV511 Camera support (DEPRECATED)"
878 depends on VIDEO_V4L1
880 This driver is DEPRECATED please use the gspca ov519 module
881 instead. Note that for the ov511 / ov518 support of the gspca module
882 you need atleast version 0.6.0 of libv4l.
884 Say Y here if you want to connect this type of camera to your
885 computer's USB port. See <file:Documentation/video4linux/ov511.txt>
886 for more information and for a list of supported cameras.
888 To compile this driver as a module, choose M here: the
889 module will be called ov511.
892 tristate "USB SE401 Camera support"
893 depends on VIDEO_V4L1
895 Say Y here if you want to connect this type of camera to your
896 computer's USB port. See <file:Documentation/video4linux/se401.txt>
897 for more information and for a list of supported cameras.
899 To compile this driver as a module, choose M here: the
900 module will be called se401.
902 source "drivers/media/video/sn9c102/Kconfig"
905 tristate "USB STV680 (Pencam) Camera support"
906 depends on VIDEO_V4L1
908 Say Y here if you want to connect this type of camera to your
909 computer's USB port. This includes the Pencam line of cameras.
910 See <file:Documentation/video4linux/stv680.txt> for more information
911 and for a list of supported cameras.
913 To compile this driver as a module, choose M here: the
914 module will be called stv680.
916 source "drivers/media/video/zc0301/Kconfig"
918 source "drivers/media/video/pwc/Kconfig"
921 tristate "USB ZR364XX Camera support"
922 depends on VIDEO_V4L2
924 select VIDEOBUF_VMALLOC
926 Say Y here if you want to connect this type of camera to your
928 See <file:Documentation/video4linux/zr364xx.txt> for more info
929 and list of supported cameras.
931 To compile this driver as a module, choose M here: the
932 module will be called zr364xx.
935 tristate "USB Syntek DC1125 Camera support"
936 depends on VIDEO_V4L2 && EXPERIMENTAL
938 Say Y here if you want to use this type of camera.
939 Supported devices are typically found in some Asus laptops,
940 with USB id 174f:a311 and 05e1:0501. Other Syntek cameras
941 may be supported by the stk11xx driver, from which this is
942 derived, see http://stk11xx.sourceforge.net
944 To compile this driver as a module, choose M here: the
945 module will be called stkwebcam.
948 tristate "USB Sensoray 2255 video capture device"
949 depends on VIDEO_V4L2
950 select VIDEOBUF_VMALLOC
953 Say Y here if you want support for the Sensoray 2255 USB device.
954 This driver can be compiled as a module, called s2255drv.
956 endif # V4L_USB_DRIVERS
957 endif # VIDEO_CAPTURE_DRIVERS