1 /* Linux driver for devices based on the DiBcom DiB0700 USB bridge
3 * This program is free software; you can redistribute it and/or modify it
4 * under the terms of the GNU General Public License as published by the Free
5 * Software Foundation, version 2.
7 * Copyright (C) 2005-9 DiBcom, SA et al
11 #include "dib3000mc.h"
18 #include "tuner-xc2028.h"
27 static int force_lna_activation;
28 module_param(force_lna_activation, int, 0644);
29 MODULE_PARM_DESC(force_lna_activation, "force the activation of Low-Noise-Amplifyer(s) (LNA), "
30 "if applicable for the device (default: 0=automatic/off).");
32 struct dib0700_adapter_state {
33 int (*set_param_save) (struct dvb_frontend *, struct dvb_frontend_parameters *);
34 const struct firmware *frontend_firmware;
37 /* Hauppauge Nova-T 500 (aka Bristol)
38 * has a LNA on GPIO0 which is enabled by setting 1 */
39 static struct mt2060_config bristol_mt2060_config[2] = {
49 static struct dibx000_agc_config bristol_dib3000p_mt2060_agc_config = {
50 .band_caps = BAND_VHF | BAND_UHF,
51 .setup = (1 << 8) | (5 << 5) | (0 << 4) | (0 << 3) | (0 << 2) | (2 << 0),
71 static struct dib3000mc_config bristol_dib3000mc_config[2] = {
72 { .agc = &bristol_dib3000p_mt2060_agc_config,
74 .ln_adc_level = 0x1cc7,
75 .output_mpeg2_in_188_bytes = 1,
77 { .agc = &bristol_dib3000p_mt2060_agc_config,
79 .ln_adc_level = 0x1cc7,
80 .output_mpeg2_in_188_bytes = 1,
84 static int bristol_frontend_attach(struct dvb_usb_adapter *adap)
86 struct dib0700_state *st = adap->dev->priv;
88 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(10);
89 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10);
90 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10);
91 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(10);
93 if (force_lna_activation)
94 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
96 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 0);
98 if (dib3000mc_i2c_enumeration(&adap->dev->i2c_adap, 2, DEFAULT_DIB3000P_I2C_ADDRESS, bristol_dib3000mc_config) != 0) {
99 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(10);
103 st->mt2060_if1[adap->id] = 1220;
104 return (adap->fe_adap[0].fe = dvb_attach(dib3000mc_attach, &adap->dev->i2c_adap,
105 (10 + adap->id) << 1, &bristol_dib3000mc_config[adap->id])) == NULL ? -ENODEV : 0;
108 static int eeprom_read(struct i2c_adapter *adap,u8 adrs,u8 *pval)
110 struct i2c_msg msg[2] = {
111 { .addr = 0x50, .flags = 0, .buf = &adrs, .len = 1 },
112 { .addr = 0x50, .flags = I2C_M_RD, .buf = pval, .len = 1 },
114 if (i2c_transfer(adap, msg, 2) != 2) return -EREMOTEIO;
118 static int bristol_tuner_attach(struct dvb_usb_adapter *adap)
120 struct i2c_adapter *prim_i2c = &adap->dev->i2c_adap;
121 struct i2c_adapter *tun_i2c = dib3000mc_get_tuner_i2c_master(adap->fe_adap[0].fe, 1);
124 if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) &&
125 adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_500_2)) {
126 if (!eeprom_read(prim_i2c,0x59 + adap->id,&a)) if1=1220+a;
128 return dvb_attach(mt2060_attach, adap->fe_adap[0].fe, tun_i2c,
129 &bristol_mt2060_config[adap->id], if1) == NULL ?
133 /* STK7700D: Pinnacle/Terratec/Hauppauge Dual DVB-T Diversity */
136 static struct dibx000_agc_config stk7700d_7000p_mt2266_agc_config[2] = {
140 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=1, P_agc_inv_pwm2=1,
141 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
142 (0 << 15) | (0 << 14) | (1 << 11) | (1 << 10) | (1 << 9) | (0 << 8)
143 | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
178 BAND_VHF | BAND_LBAND,
180 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=1, P_agc_inv_pwm2=1,
181 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
182 (0 << 15) | (0 << 14) | (1 << 11) | (1 << 10) | (1 << 9) | (0 << 8)
183 | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0),
220 static struct dibx000_bandwidth_config stk7700d_mt2266_pll_config = {
224 (3 << 14) | (1 << 12) | (524 << 0),
229 static struct dib7000p_config stk7700d_dib7000p_mt2266_config[] = {
230 { .output_mpeg2_in_188_bytes = 1,
231 .hostbus_diversity = 1,
232 .tuner_is_baseband = 1,
234 .agc_config_count = 2,
235 .agc = stk7700d_7000p_mt2266_agc_config,
236 .bw = &stk7700d_mt2266_pll_config,
238 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
239 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
240 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
242 { .output_mpeg2_in_188_bytes = 1,
243 .hostbus_diversity = 1,
244 .tuner_is_baseband = 1,
246 .agc_config_count = 2,
247 .agc = stk7700d_7000p_mt2266_agc_config,
248 .bw = &stk7700d_mt2266_pll_config,
250 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
251 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
252 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
256 static struct mt2266_config stk7700d_mt2266_config[2] = {
257 { .i2c_address = 0x60
259 { .i2c_address = 0x60
263 static int stk7700P2_frontend_attach(struct dvb_usb_adapter *adap)
266 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
268 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
269 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
270 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
271 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
273 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
275 if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
276 stk7700d_dib7000p_mt2266_config)
278 err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", __func__);
283 adap->fe_adap[0].fe =
284 dvb_attach(dib7000p_attach, &adap->dev->i2c_adap,
285 0x80 + (adap->id << 1),
286 &stk7700d_dib7000p_mt2266_config[adap->id]);
288 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
291 static int stk7700d_frontend_attach(struct dvb_usb_adapter *adap)
294 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
296 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
297 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
298 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
299 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
301 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
303 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
304 if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 2, 18,
305 stk7700d_dib7000p_mt2266_config)
307 err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", __func__);
312 adap->fe_adap[0].fe =
313 dvb_attach(dib7000p_attach, &adap->dev->i2c_adap,
314 0x80 + (adap->id << 1),
315 &stk7700d_dib7000p_mt2266_config[adap->id]);
317 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
320 static int stk7700d_tuner_attach(struct dvb_usb_adapter *adap)
322 struct i2c_adapter *tun_i2c;
323 tun_i2c = dib7000p_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
324 return dvb_attach(mt2266_attach, adap->fe_adap[0].fe, tun_i2c,
325 &stk7700d_mt2266_config[adap->id]) == NULL ? -ENODEV : 0;
328 /* STK7700-PH: Digital/Analog Hybrid Tuner, e.h. Cinergy HT USB HE */
329 static struct dibx000_agc_config xc3028_agc_config = {
330 BAND_VHF | BAND_UHF, /* band_caps */
332 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=0,
333 * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
334 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
335 (0 << 15) | (0 << 14) | (0 << 11) | (0 << 10) | (0 << 9) | (0 << 8) |
336 (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), /* setup */
339 21, /* time_stabiliz */
351 39718, /* agc2_max */
360 29, /* agc2_slope1 */
361 29, /* agc2_slope2 */
368 1, /* perform_agc_softsplit */
371 /* PLL Configuration for COFDM BW_MHz = 8.00 with external clock = 30.00 */
372 static struct dibx000_bandwidth_config xc3028_bw_config = {
373 60000, 30000, /* internal, sampling */
374 1, 8, 3, 1, 0, /* pll_cfg: prediv, ratio, range, reset, bypass */
375 0, 0, 1, 1, 0, /* misc: refdiv, bypclk_div, IO_CLK_en_core, ADClkSrc,
377 (3 << 14) | (1 << 12) | (524 << 0), /* sad_cfg: refsel, sel, freq_15k */
378 (1 << 25) | 5816102, /* ifreq = 5.200000 MHz */
380 30000000, /* xtal_hz */
383 static struct dib7000p_config stk7700ph_dib7700_xc3028_config = {
384 .output_mpeg2_in_188_bytes = 1,
385 .tuner_is_baseband = 1,
387 .agc_config_count = 1,
388 .agc = &xc3028_agc_config,
389 .bw = &xc3028_bw_config,
391 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
392 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
393 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
396 static int stk7700ph_xc3028_callback(void *ptr, int component,
397 int command, int arg)
399 struct dvb_usb_adapter *adap = ptr;
402 case XC2028_TUNER_RESET:
403 /* Send the tuner in then out of reset */
404 dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 0); msleep(10);
405 dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
407 case XC2028_RESET_CLK:
410 err("%s: unknown command %d, arg %d\n", __func__,
417 static struct xc2028_ctrl stk7700ph_xc3028_ctrl = {
418 .fname = XC2028_DEFAULT_FIRMWARE,
420 .demod = XC3028_FE_DIBCOM52,
423 static struct xc2028_config stk7700ph_xc3028_config = {
425 .ctrl = &stk7700ph_xc3028_ctrl,
428 static int stk7700ph_frontend_attach(struct dvb_usb_adapter *adap)
430 struct usb_device_descriptor *desc = &adap->dev->udev->descriptor;
432 if (desc->idVendor == cpu_to_le16(USB_VID_PINNACLE) &&
433 desc->idProduct == cpu_to_le16(USB_PID_PINNACLE_EXPRESSCARD_320CX))
434 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
436 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
438 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
439 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
440 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
441 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
443 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
445 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
448 if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
449 &stk7700ph_dib7700_xc3028_config) != 0) {
450 err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n",
455 adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80,
456 &stk7700ph_dib7700_xc3028_config);
458 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
461 static int stk7700ph_tuner_attach(struct dvb_usb_adapter *adap)
463 struct i2c_adapter *tun_i2c;
465 tun_i2c = dib7000p_get_i2c_master(adap->fe_adap[0].fe,
466 DIBX000_I2C_INTERFACE_TUNER, 1);
468 stk7700ph_xc3028_config.i2c_adap = tun_i2c;
470 /* FIXME: generalize & move to common area */
471 adap->fe_adap[0].fe->callback = stk7700ph_xc3028_callback;
473 return dvb_attach(xc2028_attach, adap->fe_adap[0].fe, &stk7700ph_xc3028_config)
474 == NULL ? -ENODEV : 0;
477 #define DEFAULT_RC_INTERVAL 50
479 static u8 rc_request[] = { REQUEST_POLL_RC, 0 };
481 /* Number of keypresses to ignore before start repeating */
482 #define RC_REPEAT_DELAY 6
485 * This function is used only when firmware is < 1.20 version. Newer
486 * firmwares use bulk mode, with functions implemented at dib0700_core,
487 * at dib0700_rc_urb_completion()
489 static int dib0700_rc_query_old_firmware(struct dvb_usb_device *d)
495 struct dib0700_state *st = d->priv;
497 if (st->fw_version >= 0x10200) {
498 /* For 1.20 firmware , We need to keep the RC polling
499 callback so we can reuse the input device setup in
500 dvb-usb-remote.c. However, the actual work is being done
501 in the bulk URB completion handler. */
505 i = dib0700_ctrl_rd(d, rc_request, 2, key, 4);
507 err("RC Query Failed");
511 /* losing half of KEY_0 events from Philipps rc5 remotes.. */
512 if (key[0] == 0 && key[1] == 0 && key[2] == 0 && key[3] == 0)
515 /* info("%d: %2X %2X %2X %2X",dvb_usb_dib0700_ir_proto,(int)key[3-2],(int)key[3-3],(int)key[3-1],(int)key[3]); */
517 dib0700_rc_setup(d); /* reset ir sensor data to prevent false events */
520 switch (d->props.rc.core.protocol) {
522 /* NEC protocol sends repeat code as 0 0 0 FF */
523 if ((key[3-2] == 0x00) && (key[3-3] == 0x00) &&
525 keycode = d->last_event;
527 keycode = key[3-2] << 8 | key[3-3];
528 d->last_event = keycode;
531 rc_keydown(d->rc_dev, keycode, 0);
534 /* RC-5 protocol changes toggle bit on new keypress */
535 keycode = key[3-2] << 8 | key[3-3];
537 rc_keydown(d->rc_dev, keycode, toggle);
544 /* STK7700P: Hauppauge Nova-T Stick, AVerMedia Volar */
545 static struct dibx000_agc_config stk7700p_7000m_mt2060_agc_config = {
548 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
549 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
550 (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
551 | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0),
591 static struct dibx000_agc_config stk7700p_7000p_mt2060_agc_config = {
594 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
595 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
596 (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
597 | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0),
637 static struct dibx000_bandwidth_config stk7700p_pll_config = {
641 (3 << 14) | (1 << 12) | (524 << 0),
647 static struct dib7000m_config stk7700p_dib7000m_config = {
649 .output_mpeg2_in_188_bytes = 1,
652 .agc_config_count = 1,
653 .agc = &stk7700p_7000m_mt2060_agc_config,
654 .bw = &stk7700p_pll_config,
656 .gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
657 .gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
658 .gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS,
661 static struct dib7000p_config stk7700p_dib7000p_config = {
662 .output_mpeg2_in_188_bytes = 1,
664 .agc_config_count = 1,
665 .agc = &stk7700p_7000p_mt2060_agc_config,
666 .bw = &stk7700p_pll_config,
668 .gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
669 .gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
670 .gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS,
673 static int stk7700p_frontend_attach(struct dvb_usb_adapter *adap)
675 struct dib0700_state *st = adap->dev->priv;
676 /* unless there is no real power management in DVB - we leave the device on GPIO6 */
678 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
679 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(50);
681 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10);
682 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
684 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10);
685 dib0700_ctrl_clock(adap->dev, 72, 1);
686 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(100);
688 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
690 st->mt2060_if1[0] = 1220;
692 if (dib7000pc_detection(&adap->dev->i2c_adap)) {
693 adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000p_config);
694 st->is_dib7000pc = 1;
696 adap->fe_adap[0].fe = dvb_attach(dib7000m_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000m_config);
698 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
701 static struct mt2060_config stk7700p_mt2060_config = {
705 static int stk7700p_tuner_attach(struct dvb_usb_adapter *adap)
707 struct i2c_adapter *prim_i2c = &adap->dev->i2c_adap;
708 struct dib0700_state *st = adap->dev->priv;
709 struct i2c_adapter *tun_i2c;
712 if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) &&
713 adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_STICK)) {
714 if (!eeprom_read(prim_i2c,0x58,&a)) if1=1220+a;
716 if (st->is_dib7000pc)
717 tun_i2c = dib7000p_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
719 tun_i2c = dib7000m_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
721 return dvb_attach(mt2060_attach, adap->fe_adap[0].fe, tun_i2c, &stk7700p_mt2060_config,
722 if1) == NULL ? -ENODEV : 0;
725 /* DIB7070 generic */
726 static struct dibx000_agc_config dib7070_agc_config = {
727 BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND,
728 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
729 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
730 (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
731 | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
768 static int dib7070_tuner_reset(struct dvb_frontend *fe, int onoff)
770 deb_info("reset: %d", onoff);
771 return dib7000p_set_gpio(fe, 8, 0, !onoff);
774 static int dib7070_tuner_sleep(struct dvb_frontend *fe, int onoff)
776 deb_info("sleep: %d", onoff);
777 return dib7000p_set_gpio(fe, 9, 0, onoff);
780 static struct dib0070_config dib7070p_dib0070_config[2] = {
782 .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
783 .reset = dib7070_tuner_reset,
784 .sleep = dib7070_tuner_sleep,
786 .clock_pad_drive = 4,
789 .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
790 .reset = dib7070_tuner_reset,
791 .sleep = dib7070_tuner_sleep,
797 static struct dib0070_config dib7770p_dib0070_config = {
798 .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
799 .reset = dib7070_tuner_reset,
800 .sleep = dib7070_tuner_sleep,
802 .clock_pad_drive = 0,
807 static int dib7070_set_param_override(struct dvb_frontend *fe, struct dvb_frontend_parameters *fep)
809 struct dvb_usb_adapter *adap = fe->dvb->priv;
810 struct dib0700_adapter_state *state = adap->priv;
813 u8 band = BAND_OF_FREQUENCY(fep->frequency/1000);
815 case BAND_VHF: offset = 950; break;
817 default: offset = 550; break;
819 deb_info("WBD for DiB7000P: %d\n", offset + dib0070_wbd_offset(fe));
820 dib7000p_set_wbd_ref(fe, offset + dib0070_wbd_offset(fe));
821 return state->set_param_save(fe, fep);
824 static int dib7770_set_param_override(struct dvb_frontend *fe,
825 struct dvb_frontend_parameters *fep)
827 struct dvb_usb_adapter *adap = fe->dvb->priv;
828 struct dib0700_adapter_state *state = adap->priv;
831 u8 band = BAND_OF_FREQUENCY(fep->frequency/1000);
834 dib7000p_set_gpio(fe, 0, 0, 1);
839 dib7000p_set_gpio(fe, 0, 0, 0);
843 deb_info("WBD for DiB7000P: %d\n", offset + dib0070_wbd_offset(fe));
844 dib7000p_set_wbd_ref(fe, offset + dib0070_wbd_offset(fe));
845 return state->set_param_save(fe, fep);
848 static int dib7770p_tuner_attach(struct dvb_usb_adapter *adap)
850 struct dib0700_adapter_state *st = adap->priv;
851 struct i2c_adapter *tun_i2c = dib7000p_get_i2c_master(adap->fe_adap[0].fe,
852 DIBX000_I2C_INTERFACE_TUNER, 1);
854 if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c,
855 &dib7770p_dib0070_config) == NULL)
858 st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
859 adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7770_set_param_override;
863 static int dib7070p_tuner_attach(struct dvb_usb_adapter *adap)
865 struct dib0700_adapter_state *st = adap->priv;
866 struct i2c_adapter *tun_i2c = dib7000p_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
869 if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c, &dib7070p_dib0070_config[0]) == NULL)
872 if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c, &dib7070p_dib0070_config[1]) == NULL)
876 st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
877 adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7070_set_param_override;
881 static int stk7700p_pid_filter(struct dvb_usb_adapter *adapter, int index,
884 struct dib0700_state *st = adapter->dev->priv;
885 if (st->is_dib7000pc)
886 return dib7000p_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff);
887 return dib7000m_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff);
890 static int stk7700p_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff)
892 struct dib0700_state *st = adapter->dev->priv;
893 if (st->is_dib7000pc)
894 return dib7000p_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff);
895 return dib7000m_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff);
898 static int stk70x0p_pid_filter(struct dvb_usb_adapter *adapter, int index, u16 pid, int onoff)
900 return dib7000p_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff);
903 static int stk70x0p_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff)
905 return dib7000p_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff);
908 static struct dibx000_bandwidth_config dib7070_bw_config_12_mhz = {
912 (3 << 14) | (1 << 12) | (524 << 0),
918 static struct dib7000p_config dib7070p_dib7000p_config = {
919 .output_mpeg2_in_188_bytes = 1,
921 .agc_config_count = 1,
922 .agc = &dib7070_agc_config,
923 .bw = &dib7070_bw_config_12_mhz,
924 .tuner_is_baseband = 1,
927 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
928 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
929 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
931 .hostbus_diversity = 1,
935 static int stk7070p_frontend_attach(struct dvb_usb_adapter *adap)
937 struct usb_device_descriptor *p = &adap->dev->udev->descriptor;
938 if (p->idVendor == cpu_to_le16(USB_VID_PINNACLE) &&
939 p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E))
940 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
942 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
944 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
945 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
946 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
947 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
949 dib0700_ctrl_clock(adap->dev, 72, 1);
952 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
954 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
956 if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
957 &dib7070p_dib7000p_config) != 0) {
958 err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n",
963 adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80,
964 &dib7070p_dib7000p_config);
965 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
969 static struct dib7000p_config dib7770p_dib7000p_config = {
970 .output_mpeg2_in_188_bytes = 1,
972 .agc_config_count = 1,
973 .agc = &dib7070_agc_config,
974 .bw = &dib7070_bw_config_12_mhz,
975 .tuner_is_baseband = 1,
978 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
979 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
980 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
982 .hostbus_diversity = 1,
983 .enable_current_mirror = 1,
984 .disable_sample_and_hold = 0,
987 static int stk7770p_frontend_attach(struct dvb_usb_adapter *adap)
989 struct usb_device_descriptor *p = &adap->dev->udev->descriptor;
990 if (p->idVendor == cpu_to_le16(USB_VID_PINNACLE) &&
991 p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E))
992 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
994 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
996 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
997 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
998 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
999 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
1001 dib0700_ctrl_clock(adap->dev, 72, 1);
1004 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
1006 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
1008 if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
1009 &dib7770p_dib7000p_config) != 0) {
1010 err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n",
1015 adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80,
1016 &dib7770p_dib7000p_config);
1017 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
1020 /* DIB807x generic */
1021 static struct dibx000_agc_config dib807x_agc_config[2] = {
1024 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
1025 * P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
1026 * P_agc_inv_pwm2=0,P_agc_inh_dc_rv_est=0,
1027 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
1029 (0 << 15) | (0 << 14) | (7 << 11) | (0 << 10) | (0 << 9) |
1030 (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) |
1031 (0 << 0), /* setup*/
1034 10, /* time_stabiliz*/
1044 65535, /* agc1_max*/
1047 65535, /* agc2_max*/
1053 206, /* agc1_slope1*/
1054 255, /* agc1_slope2*/
1057 88, /* agc2_slope1*/
1058 90, /* agc2_slope2*/
1065 0, /* perform_agc_softsplit*/
1068 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
1069 * P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
1070 * P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
1071 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
1073 (0 << 15) | (0 << 14) | (1 << 11) | (0 << 10) | (0 << 9) |
1074 (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) |
1075 (0 << 0), /* setup */
1078 10, /* time_stabiliz*/
1088 65535, /* agc1_max*/
1091 65535, /* agc2_max*/
1097 206, /* agc1_slope1*/
1098 255, /* agc1_slope2*/
1101 88, /* agc2_slope1*/
1102 90, /* agc2_slope2*/
1109 0, /* perform_agc_softsplit*/
1113 static struct dibx000_bandwidth_config dib807x_bw_config_12_mhz = {
1114 60000, 15000, /* internal, sampling*/
1115 1, 20, 3, 1, 0, /* pll_cfg: prediv, ratio, range, reset, bypass*/
1116 0, 0, 1, 1, 2, /* misc: refdiv, bypclk_div, IO_CLK_en_core,
1118 (3 << 14) | (1 << 12) | (599 << 0), /* sad_cfg: refsel, sel, freq_15k*/
1119 (0 << 25) | 0, /* ifreq = 0.000000 MHz*/
1121 12000000, /* xtal_hz*/
1124 static struct dib8000_config dib807x_dib8000_config[2] = {
1126 .output_mpeg2_in_188_bytes = 1,
1128 .agc_config_count = 2,
1129 .agc = dib807x_agc_config,
1130 .pll = &dib807x_bw_config_12_mhz,
1131 .tuner_is_baseband = 1,
1133 .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
1134 .gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
1135 .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
1137 .hostbus_diversity = 1,
1139 .agc_control = &dib0070_ctrl_agc_filter,
1140 .output_mode = OUTMODE_MPEG2_FIFO,
1143 .output_mpeg2_in_188_bytes = 1,
1145 .agc_config_count = 2,
1146 .agc = dib807x_agc_config,
1147 .pll = &dib807x_bw_config_12_mhz,
1148 .tuner_is_baseband = 1,
1150 .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
1151 .gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
1152 .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
1154 .hostbus_diversity = 1,
1155 .agc_control = &dib0070_ctrl_agc_filter,
1156 .output_mode = OUTMODE_MPEG2_FIFO,
1161 static int dib80xx_tuner_reset(struct dvb_frontend *fe, int onoff)
1163 return dib8000_set_gpio(fe, 5, 0, !onoff);
1166 static int dib80xx_tuner_sleep(struct dvb_frontend *fe, int onoff)
1168 return dib8000_set_gpio(fe, 0, 0, onoff);
1171 static const struct dib0070_wbd_gain_cfg dib8070_wbd_gain_cfg[] = {
1176 static struct dib0070_config dib807x_dib0070_config[2] = {
1178 .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
1179 .reset = dib80xx_tuner_reset,
1180 .sleep = dib80xx_tuner_sleep,
1182 .clock_pad_drive = 4,
1184 .force_crystal_mode = 1,
1185 .enable_third_order_filter = 1,
1187 .wbd_gain = dib8070_wbd_gain_cfg,
1188 .osc_buffer_state = 0,
1189 .freq_offset_khz_uhf = -100,
1190 .freq_offset_khz_vhf = -100,
1192 .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
1193 .reset = dib80xx_tuner_reset,
1194 .sleep = dib80xx_tuner_sleep,
1196 .clock_pad_drive = 2,
1198 .force_crystal_mode = 1,
1199 .enable_third_order_filter = 1,
1201 .wbd_gain = dib8070_wbd_gain_cfg,
1202 .osc_buffer_state = 0,
1203 .freq_offset_khz_uhf = -25,
1204 .freq_offset_khz_vhf = -25,
1208 static int dib807x_set_param_override(struct dvb_frontend *fe,
1209 struct dvb_frontend_parameters *fep)
1211 struct dvb_usb_adapter *adap = fe->dvb->priv;
1212 struct dib0700_adapter_state *state = adap->priv;
1214 u16 offset = dib0070_wbd_offset(fe);
1215 u8 band = BAND_OF_FREQUENCY(fep->frequency/1000);
1220 case BAND_UHF: /* fall-thru wanted */
1222 offset += 250; break;
1224 deb_info("WBD for DiB8000: %d\n", offset);
1225 dib8000_set_wbd_ref(fe, offset);
1227 return state->set_param_save(fe, fep);
1230 static int dib807x_tuner_attach(struct dvb_usb_adapter *adap)
1232 struct dib0700_adapter_state *st = adap->priv;
1233 struct i2c_adapter *tun_i2c = dib8000_get_i2c_master(adap->fe_adap[0].fe,
1234 DIBX000_I2C_INTERFACE_TUNER, 1);
1236 if (adap->id == 0) {
1237 if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c,
1238 &dib807x_dib0070_config[0]) == NULL)
1241 if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c,
1242 &dib807x_dib0070_config[1]) == NULL)
1246 st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
1247 adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib807x_set_param_override;
1251 static int stk80xx_pid_filter(struct dvb_usb_adapter *adapter, int index,
1254 return dib8000_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff);
1257 static int stk80xx_pid_filter_ctrl(struct dvb_usb_adapter *adapter,
1260 return dib8000_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff);
1264 static int stk807x_frontend_attach(struct dvb_usb_adapter *adap)
1266 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
1268 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
1269 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
1270 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
1272 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
1274 dib0700_ctrl_clock(adap->dev, 72, 1);
1277 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
1279 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
1281 dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
1284 adap->fe_adap[0].fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80,
1285 &dib807x_dib8000_config[0]);
1287 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
1291 static int stk807xpvr_frontend_attach0(struct dvb_usb_adapter *adap)
1293 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
1295 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
1297 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
1298 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
1299 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
1301 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
1303 dib0700_ctrl_clock(adap->dev, 72, 1);
1306 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
1308 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
1310 /* initialize IC 0 */
1311 dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x22, 0x80);
1313 adap->fe_adap[0].fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80,
1314 &dib807x_dib8000_config[0]);
1316 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
1319 static int stk807xpvr_frontend_attach1(struct dvb_usb_adapter *adap)
1321 /* initialize IC 1 */
1322 dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x12, 0x82);
1324 adap->fe_adap[0].fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x82,
1325 &dib807x_dib8000_config[1]);
1327 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
1331 struct dibx000_agc_config dib8090_agc_config[2] = {
1333 BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND,
1334 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1,
1335 * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
1336 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
1337 (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
1338 | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
1376 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1,
1377 * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
1378 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
1379 (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
1380 | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
1418 static struct dibx000_bandwidth_config dib8090_pll_config_12mhz = {
1422 (3 << 14) | (1 << 12) | (599 << 0),
1428 static int dib8090_get_adc_power(struct dvb_frontend *fe)
1430 return dib8000_get_adc_power(fe, 1);
1433 static struct dib8000_config dib809x_dib8000_config[2] = {
1435 .output_mpeg2_in_188_bytes = 1,
1437 .agc_config_count = 2,
1438 .agc = dib8090_agc_config,
1439 .agc_control = dib0090_dcc_freq,
1440 .pll = &dib8090_pll_config_12mhz,
1441 .tuner_is_baseband = 1,
1443 .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
1444 .gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
1445 .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
1447 .hostbus_diversity = 1,
1449 .output_mode = OUTMODE_MPEG2_FIFO,
1451 .diversity_delay = 48,
1454 .output_mpeg2_in_188_bytes = 1,
1456 .agc_config_count = 2,
1457 .agc = dib8090_agc_config,
1458 .agc_control = dib0090_dcc_freq,
1459 .pll = &dib8090_pll_config_12mhz,
1460 .tuner_is_baseband = 1,
1462 .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
1463 .gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
1464 .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
1466 .hostbus_diversity = 1,
1468 .output_mode = OUTMODE_DIVERSITY,
1470 .diversity_delay = 1,
1475 static struct dib0090_wbd_slope dib8090_wbd_table[] = {
1476 /* max freq ; cold slope ; cold offset ; warm slope ; warm offset ; wbd gain */
1477 { 120, 0, 500, 0, 500, 4 }, /* CBAND */
1478 { 170, 0, 450, 0, 450, 4 }, /* CBAND */
1479 { 380, 48, 373, 28, 259, 6 }, /* VHF */
1480 { 860, 34, 700, 36, 616, 6 }, /* high UHF */
1481 { 0xFFFF, 34, 700, 36, 616, 6 }, /* default */
1484 static struct dib0090_config dib809x_dib0090_config = {
1488 .io.pll_loopdiv = 20,
1489 .io.adc_clock_ratio = 8,
1490 .io.pll_int_loop_filt = 0,
1491 .io.clock_khz = 12000,
1492 .reset = dib80xx_tuner_reset,
1493 .sleep = dib80xx_tuner_sleep,
1496 .i2c_address = DEFAULT_DIB0090_I2C_ADDRESS,
1499 .get_adc_power = dib8090_get_adc_power,
1500 .freq_offset_khz_uhf = -63,
1501 .freq_offset_khz_vhf = -143,
1502 .wbd = dib8090_wbd_table,
1503 .fref_clock_ratio = 6,
1506 static int dib8096_set_param_override(struct dvb_frontend *fe,
1507 struct dvb_frontend_parameters *fep)
1509 struct dvb_usb_adapter *adap = fe->dvb->priv;
1510 struct dib0700_adapter_state *state = adap->priv;
1511 u8 band = BAND_OF_FREQUENCY(fep->frequency/1000);
1514 enum frontend_tune_state tune_state = CT_SHUTDOWN;
1515 u16 ltgain, rf_gain_limit;
1517 ret = state->set_param_save(fe, fep);
1521 target = (dib0090_get_wbd_offset(fe) * 8 * 18 / 33 + 1) / 2;
1522 dib8000_set_wbd_ref(fe, target);
1525 if (band == BAND_CBAND) {
1526 deb_info("tuning in CBAND - soft-AGC startup\n");
1527 dib0090_set_tune_state(fe, CT_AGC_START);
1529 ret = dib0090_gain_control(fe);
1531 tune_state = dib0090_get_tune_state(fe);
1532 if (tune_state == CT_AGC_STEP_0)
1533 dib8000_set_gpio(fe, 6, 0, 1);
1534 else if (tune_state == CT_AGC_STEP_1) {
1535 dib0090_get_current_gain(fe, NULL, NULL, &rf_gain_limit, <gain);
1536 if (rf_gain_limit == 0)
1537 dib8000_set_gpio(fe, 6, 0, 0);
1539 } while (tune_state < CT_AGC_STOP);
1540 dib0090_pwm_gain_reset(fe);
1541 dib8000_pwm_agc_reset(fe);
1542 dib8000_set_tune_state(fe, CT_DEMOD_START);
1544 deb_info("not tuning in CBAND - standard AGC startup\n");
1545 dib0090_pwm_gain_reset(fe);
1551 static int dib809x_tuner_attach(struct dvb_usb_adapter *adap)
1553 struct dib0700_adapter_state *st = adap->priv;
1554 struct i2c_adapter *tun_i2c = dib8000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
1556 if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &dib809x_dib0090_config) == NULL)
1559 st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
1560 adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib8096_set_param_override;
1564 static int stk809x_frontend_attach(struct dvb_usb_adapter *adap)
1566 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
1568 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
1569 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
1570 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
1572 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
1574 dib0700_ctrl_clock(adap->dev, 72, 1);
1577 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
1579 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
1581 dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, 0x80);
1583 adap->fe_adap[0].fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80, &dib809x_dib8000_config[0]);
1585 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
1588 static int nim8096md_tuner_attach(struct dvb_usb_adapter *adap)
1590 struct dib0700_adapter_state *st = adap->priv;
1591 struct i2c_adapter *tun_i2c;
1592 struct dvb_frontend *fe_slave = dib8000_get_slave_frontend(adap->fe_adap[0].fe, 1);
1595 tun_i2c = dib8000_get_i2c_master(fe_slave, DIBX000_I2C_INTERFACE_TUNER, 1);
1596 if (dvb_attach(dib0090_register, fe_slave, tun_i2c, &dib809x_dib0090_config) == NULL)
1598 fe_slave->dvb = adap->fe_adap[0].fe->dvb;
1599 fe_slave->ops.tuner_ops.set_params = dib8096_set_param_override;
1601 tun_i2c = dib8000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
1602 if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &dib809x_dib0090_config) == NULL)
1605 st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
1606 adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib8096_set_param_override;
1611 static int nim8096md_frontend_attach(struct dvb_usb_adapter *adap)
1613 struct dvb_frontend *fe_slave;
1615 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
1617 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
1619 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
1620 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
1621 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
1623 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
1625 dib0700_ctrl_clock(adap->dev, 72, 1);
1628 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
1630 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
1632 dib8000_i2c_enumeration(&adap->dev->i2c_adap, 2, 18, 0x80);
1634 adap->fe_adap[0].fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80, &dib809x_dib8000_config[0]);
1635 if (adap->fe_adap[0].fe == NULL)
1638 fe_slave = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x82, &dib809x_dib8000_config[1]);
1639 dib8000_set_slave_frontend(adap->fe_adap[0].fe, fe_slave);
1641 return fe_slave == NULL ? -ENODEV : 0;
1645 static int dib90x0_pid_filter(struct dvb_usb_adapter *adapter, int index, u16 pid, int onoff)
1647 return dib9000_fw_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff);
1650 static int dib90x0_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff)
1652 return dib9000_fw_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff);
1655 static int dib90x0_tuner_reset(struct dvb_frontend *fe, int onoff)
1657 return dib9000_set_gpio(fe, 5, 0, !onoff);
1660 static int dib90x0_tuner_sleep(struct dvb_frontend *fe, int onoff)
1662 return dib9000_set_gpio(fe, 0, 0, onoff);
1665 static int dib01x0_pmu_update(struct i2c_adapter *i2c, u16 *data, u8 len)
1667 u8 wb[4] = { 0xc >> 8, 0xc & 0xff, 0, 0 };
1669 struct i2c_msg msg[2] = {
1670 {.addr = 0x1e >> 1, .flags = 0, .buf = wb, .len = 2},
1671 {.addr = 0x1e >> 1, .flags = I2C_M_RD, .buf = rb, .len = 2},
1675 dibx000_i2c_set_speed(i2c, 250);
1677 if (i2c_transfer(i2c, msg, 2) != 2)
1680 switch (rb[0] << 8 | rb[1]) {
1682 deb_info("Found DiB0170 rev1: This version of DiB0170 is not supported any longer.\n");
1685 deb_info("Found DiB0170 rev2");
1688 deb_info("Found DiB0190 rev2");
1691 deb_info("DiB01x0 not found");
1695 for (index_data = 0; index_data < len; index_data += 2) {
1696 wb[2] = (data[index_data + 1] >> 8) & 0xff;
1697 wb[3] = (data[index_data + 1]) & 0xff;
1699 if (data[index_data] == 0) {
1700 wb[0] = (data[index_data] >> 8) & 0xff;
1701 wb[1] = (data[index_data]) & 0xff;
1703 if (i2c_transfer(i2c, msg, 2) != 2)
1706 wb[3] |= rb[1] & ~(3 << 4);
1709 wb[0] = (data[index_data] >> 8)&0xff;
1710 wb[1] = (data[index_data])&0xff;
1712 if (i2c_transfer(i2c, &msg[0], 1) != 1)
1718 static struct dib9000_config stk9090m_config = {
1719 .output_mpeg2_in_188_bytes = 1,
1720 .output_mode = OUTMODE_MPEG2_FIFO,
1721 .vcxo_timer = 279620,
1722 .timing_frequency = 20452225,
1723 .demod_clock_khz = 60000,
1724 .xtal_clock_khz = 30000,
1725 .if_drives = (0 << 15) | (1 << 13) | (0 << 12) | (3 << 10) | (0 << 9) | (1 << 7) | (0 << 6) | (0 << 4) | (1 << 3) | (1 << 1) | (0),
1729 { 240, { BOARD_GPIO_COMPONENT_DEMOD, BOARD_GPIO_FUNCTION_SUBBAND_GPIO, 0x0008, 0x0000, 0x0008 } }, /* GPIO 3 to 1 for VHF */
1730 { 890, { BOARD_GPIO_COMPONENT_DEMOD, BOARD_GPIO_FUNCTION_SUBBAND_GPIO, 0x0008, 0x0000, 0x0000 } }, /* GPIO 3 to 0 for UHF */
1735 { .component = BOARD_GPIO_COMPONENT_DEMOD, .function = BOARD_GPIO_FUNCTION_COMPONENT_ON, .mask = 0x10 | 0x21, .direction = 0 & ~0x21, .value = (0x10 & ~0x1) | 0x20 },
1736 { .component = BOARD_GPIO_COMPONENT_DEMOD, .function = BOARD_GPIO_FUNCTION_COMPONENT_OFF, .mask = 0x10 | 0x21, .direction = 0 & ~0x21, .value = 0 | 0x21 },
1740 static struct dib9000_config nim9090md_config[2] = {
1742 .output_mpeg2_in_188_bytes = 1,
1743 .output_mode = OUTMODE_MPEG2_FIFO,
1744 .vcxo_timer = 279620,
1745 .timing_frequency = 20452225,
1746 .demod_clock_khz = 60000,
1747 .xtal_clock_khz = 30000,
1748 .if_drives = (0 << 15) | (1 << 13) | (0 << 12) | (3 << 10) | (0 << 9) | (1 << 7) | (0 << 6) | (0 << 4) | (1 << 3) | (1 << 1) | (0),
1750 .output_mpeg2_in_188_bytes = 1,
1751 .output_mode = OUTMODE_DIVERSITY,
1752 .vcxo_timer = 279620,
1753 .timing_frequency = 20452225,
1754 .demod_clock_khz = 60000,
1755 .xtal_clock_khz = 30000,
1756 .if_drives = (0 << 15) | (1 << 13) | (0 << 12) | (3 << 10) | (0 << 9) | (1 << 7) | (0 << 6) | (0 << 4) | (1 << 3) | (1 << 1) | (0),
1760 { 240, { BOARD_GPIO_COMPONENT_DEMOD, BOARD_GPIO_FUNCTION_SUBBAND_GPIO, 0x0006, 0x0000, 0x0006 } }, /* GPIO 1 and 2 to 1 for VHF */
1761 { 890, { BOARD_GPIO_COMPONENT_DEMOD, BOARD_GPIO_FUNCTION_SUBBAND_GPIO, 0x0006, 0x0000, 0x0000 } }, /* GPIO 1 and 2 to 0 for UHF */
1766 { .component = BOARD_GPIO_COMPONENT_DEMOD, .function = BOARD_GPIO_FUNCTION_COMPONENT_ON, .mask = 0x10 | 0x21, .direction = 0 & ~0x21, .value = (0x10 & ~0x1) | 0x20 },
1767 { .component = BOARD_GPIO_COMPONENT_DEMOD, .function = BOARD_GPIO_FUNCTION_COMPONENT_OFF, .mask = 0x10 | 0x21, .direction = 0 & ~0x21, .value = 0 | 0x21 },
1772 static struct dib0090_config dib9090_dib0090_config = {
1776 .io.pll_loopdiv = 8,
1777 .io.adc_clock_ratio = 8,
1778 .io.pll_int_loop_filt = 0,
1779 .io.clock_khz = 30000,
1780 .reset = dib90x0_tuner_reset,
1781 .sleep = dib90x0_tuner_sleep,
1786 .freq_offset_khz_uhf = 0,
1787 .freq_offset_khz_vhf = 0,
1790 static struct dib0090_config nim9090md_dib0090_config[2] = {
1795 .io.pll_loopdiv = 8,
1796 .io.adc_clock_ratio = 8,
1797 .io.pll_int_loop_filt = 0,
1798 .io.clock_khz = 30000,
1799 .reset = dib90x0_tuner_reset,
1800 .sleep = dib90x0_tuner_sleep,
1805 .freq_offset_khz_uhf = 0,
1806 .freq_offset_khz_vhf = 0,
1811 .io.pll_loopdiv = 8,
1812 .io.adc_clock_ratio = 8,
1813 .io.pll_int_loop_filt = 0,
1814 .io.clock_khz = 30000,
1815 .reset = dib90x0_tuner_reset,
1816 .sleep = dib90x0_tuner_sleep,
1821 .freq_offset_khz_uhf = 0,
1822 .freq_offset_khz_vhf = 0,
1827 static int stk9090m_frontend_attach(struct dvb_usb_adapter *adap)
1829 struct dib0700_adapter_state *state = adap->priv;
1830 struct dib0700_state *st = adap->dev->priv;
1833 /* Make use of the new i2c functions from FW 1.20 */
1834 dib0700_get_version(adap->dev, NULL, NULL, &fw_version, NULL);
1835 if (fw_version >= 0x10200)
1836 st->fw_use_new_i2c_api = 1;
1837 dib0700_set_i2c_speed(adap->dev, 340);
1839 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
1841 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
1842 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
1843 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
1844 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
1846 dib0700_ctrl_clock(adap->dev, 72, 1);
1849 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
1851 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
1853 dib9000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, 0x80);
1855 if (request_firmware(&state->frontend_firmware, "dib9090.fw", &adap->dev->udev->dev)) {
1856 deb_info("%s: Upload failed. (file not found?)\n", __func__);
1859 deb_info("%s: firmware read %Zu bytes.\n", __func__, state->frontend_firmware->size);
1861 stk9090m_config.microcode_B_fe_size = state->frontend_firmware->size;
1862 stk9090m_config.microcode_B_fe_buffer = state->frontend_firmware->data;
1864 adap->fe_adap[0].fe = dvb_attach(dib9000_attach, &adap->dev->i2c_adap, 0x80, &stk9090m_config);
1866 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
1869 static int dib9090_tuner_attach(struct dvb_usb_adapter *adap)
1871 struct dib0700_adapter_state *state = adap->priv;
1872 struct i2c_adapter *i2c = dib9000_get_tuner_interface(adap->fe_adap[0].fe);
1873 u16 data_dib190[10] = {
1881 if (dvb_attach(dib0090_fw_register, adap->fe_adap[0].fe, i2c, &dib9090_dib0090_config) == NULL)
1883 i2c = dib9000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_1_2, 0);
1884 if (dib01x0_pmu_update(i2c, data_dib190, 10) != 0)
1886 dib0700_set_i2c_speed(adap->dev, 2000);
1887 if (dib9000_firmware_post_pll_init(adap->fe_adap[0].fe) < 0)
1889 release_firmware(state->frontend_firmware);
1893 static int nim9090md_frontend_attach(struct dvb_usb_adapter *adap)
1895 struct dib0700_adapter_state *state = adap->priv;
1896 struct dib0700_state *st = adap->dev->priv;
1897 struct i2c_adapter *i2c;
1898 struct dvb_frontend *fe_slave;
1901 /* Make use of the new i2c functions from FW 1.20 */
1902 dib0700_get_version(adap->dev, NULL, NULL, &fw_version, NULL);
1903 if (fw_version >= 0x10200)
1904 st->fw_use_new_i2c_api = 1;
1905 dib0700_set_i2c_speed(adap->dev, 340);
1907 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
1909 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
1910 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
1911 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
1912 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
1914 dib0700_ctrl_clock(adap->dev, 72, 1);
1917 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
1919 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
1921 if (request_firmware(&state->frontend_firmware, "dib9090.fw", &adap->dev->udev->dev)) {
1922 deb_info("%s: Upload failed. (file not found?)\n", __func__);
1925 deb_info("%s: firmware read %Zu bytes.\n", __func__, state->frontend_firmware->size);
1927 nim9090md_config[0].microcode_B_fe_size = state->frontend_firmware->size;
1928 nim9090md_config[0].microcode_B_fe_buffer = state->frontend_firmware->data;
1929 nim9090md_config[1].microcode_B_fe_size = state->frontend_firmware->size;
1930 nim9090md_config[1].microcode_B_fe_buffer = state->frontend_firmware->data;
1932 dib9000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x20, 0x80);
1933 adap->fe_adap[0].fe = dvb_attach(dib9000_attach, &adap->dev->i2c_adap, 0x80, &nim9090md_config[0]);
1935 if (adap->fe_adap[0].fe == NULL)
1938 i2c = dib9000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_3_4, 0);
1939 dib9000_i2c_enumeration(i2c, 1, 0x12, 0x82);
1941 fe_slave = dvb_attach(dib9000_attach, i2c, 0x82, &nim9090md_config[1]);
1942 dib9000_set_slave_frontend(adap->fe_adap[0].fe, fe_slave);
1944 return fe_slave == NULL ? -ENODEV : 0;
1947 static int nim9090md_tuner_attach(struct dvb_usb_adapter *adap)
1949 struct dib0700_adapter_state *state = adap->priv;
1950 struct i2c_adapter *i2c;
1951 struct dvb_frontend *fe_slave;
1952 u16 data_dib190[10] = {
1959 i2c = dib9000_get_tuner_interface(adap->fe_adap[0].fe);
1960 if (dvb_attach(dib0090_fw_register, adap->fe_adap[0].fe, i2c, &nim9090md_dib0090_config[0]) == NULL)
1962 i2c = dib9000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_1_2, 0);
1963 if (dib01x0_pmu_update(i2c, data_dib190, 10) < 0)
1965 dib0700_set_i2c_speed(adap->dev, 2000);
1966 if (dib9000_firmware_post_pll_init(adap->fe_adap[0].fe) < 0)
1969 fe_slave = dib9000_get_slave_frontend(adap->fe_adap[0].fe, 1);
1970 if (fe_slave != NULL) {
1971 i2c = dib9000_get_component_bus_interface(adap->fe_adap[0].fe);
1972 dib9000_set_i2c_adapter(fe_slave, i2c);
1974 i2c = dib9000_get_tuner_interface(fe_slave);
1975 if (dvb_attach(dib0090_fw_register, fe_slave, i2c, &nim9090md_dib0090_config[1]) == NULL)
1977 fe_slave->dvb = adap->fe_adap[0].fe->dvb;
1978 dib9000_fw_set_component_bus_speed(adap->fe_adap[0].fe, 2000);
1979 if (dib9000_firmware_post_pll_init(fe_slave) < 0)
1982 release_firmware(state->frontend_firmware);
1988 struct dib7090p_best_adc {
1994 static int dib7090p_get_best_sampling(struct dvb_frontend *fe , struct dib7090p_best_adc *adc)
1996 u8 spur = 0, prediv = 0, loopdiv = 0, min_prediv = 1, max_prediv = 1;
1999 u32 fcp_min = 1900; /* PLL Minimum Frequency comparator KHz */
2000 u32 fcp_max = 20000; /* PLL Maximum Frequency comparator KHz */
2001 u32 fdem_max = 76000;
2002 u32 fdem_min = 69500;
2003 u32 fcp = 0, fs = 0, fdem = 0;
2004 u32 harmonic_id = 0;
2006 adc->pll_loopdiv = loopdiv;
2007 adc->pll_prediv = prediv;
2010 deb_info("bandwidth = %d fdem_min =%d", fe->dtv_property_cache.bandwidth_hz, fdem_min);
2012 /* Find Min and Max prediv */
2013 while ((xtal/max_prediv) >= fcp_min)
2017 min_prediv = max_prediv;
2018 while ((xtal/min_prediv) <= fcp_max) {
2020 if (min_prediv == 1)
2023 deb_info("MIN prediv = %d : MAX prediv = %d", min_prediv, max_prediv);
2027 for (prediv = min_prediv ; prediv < max_prediv; prediv++) {
2028 fcp = xtal / prediv;
2029 if (fcp > fcp_min && fcp < fcp_max) {
2030 for (loopdiv = 1 ; loopdiv < 64 ; loopdiv++) {
2031 fdem = ((xtal/prediv) * loopdiv);
2033 /* test min/max system restrictions */
2035 if ((fdem >= fdem_min) && (fdem <= fdem_max) && (fs >= fe->dtv_property_cache.bandwidth_hz/1000)) {
2037 /* test fs harmonics positions */
2038 for (harmonic_id = (fe->dtv_property_cache.frequency / (1000*fs)) ; harmonic_id <= ((fe->dtv_property_cache.frequency / (1000*fs))+1) ; harmonic_id++) {
2039 if (((fs*harmonic_id) >= ((fe->dtv_property_cache.frequency/1000) - (fe->dtv_property_cache.bandwidth_hz/2000))) && ((fs*harmonic_id) <= ((fe->dtv_property_cache.frequency/1000) + (fe->dtv_property_cache.bandwidth_hz/2000)))) {
2046 adc->pll_loopdiv = loopdiv;
2047 adc->pll_prediv = prediv;
2048 adc->timf = 2396745143UL/fdem*(1 << 9);
2049 adc->timf += ((2396745143UL%fdem) << 9)/fdem;
2050 deb_info("loopdiv=%i prediv=%i timf=%i", loopdiv, prediv, adc->timf);
2061 if (adc->pll_loopdiv == 0 && adc->pll_prediv == 0)
2067 static int dib7090_agc_startup(struct dvb_frontend *fe, struct dvb_frontend_parameters *fep)
2069 struct dvb_usb_adapter *adap = fe->dvb->priv;
2070 struct dib0700_adapter_state *state = adap->priv;
2071 struct dibx000_bandwidth_config pll;
2073 struct dib7090p_best_adc adc;
2076 ret = state->set_param_save(fe, fep);
2080 memset(&pll, 0, sizeof(struct dibx000_bandwidth_config));
2081 dib0090_pwm_gain_reset(fe);
2082 target = (dib0090_get_wbd_offset(fe) * 8 + 1) / 2;
2083 dib7000p_set_wbd_ref(fe, target);
2085 if (dib7090p_get_best_sampling(fe, &adc) == 0) {
2086 pll.pll_ratio = adc.pll_loopdiv;
2087 pll.pll_prediv = adc.pll_prediv;
2089 dib7000p_update_pll(fe, &pll);
2090 dib7000p_ctrl_timf(fe, DEMOD_TIMF_SET, adc.timf);
2095 static struct dib0090_wbd_slope dib7090_wbd_table[] = {
2096 { 380, 81, 850, 64, 540, 4},
2097 { 860, 51, 866, 21, 375, 4},
2098 {1700, 0, 250, 0, 100, 6},
2099 {2600, 0, 250, 0, 100, 6},
2100 { 0xFFFF, 0, 0, 0, 0, 0},
2103 struct dibx000_agc_config dib7090_agc_config[2] = {
2105 .band_caps = BAND_UHF,
2106 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
2107 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
2108 .setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
2111 .time_stabiliz = 10,
2142 .perform_agc_softsplit = 0,
2144 .band_caps = BAND_FM | BAND_VHF | BAND_CBAND,
2145 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
2146 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
2147 .setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
2150 .time_stabiliz = 10,
2181 .perform_agc_softsplit = 0,
2185 static struct dibx000_bandwidth_config dib7090_clock_config_12_mhz = {
2189 (3 << 14) | (1 << 12) | (524 << 0),
2195 static struct dib7000p_config nim7090_dib7000p_config = {
2196 .output_mpeg2_in_188_bytes = 1,
2197 .hostbus_diversity = 1,
2198 .tuner_is_baseband = 1,
2201 .agc_config_count = 2,
2202 .agc = dib7090_agc_config,
2204 .bw = &dib7090_clock_config_12_mhz,
2206 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
2207 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
2208 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
2212 .agc_control = dib7090_agc_restart,
2215 .disable_sample_and_hold = 0,
2216 .enable_current_mirror = 0,
2217 .diversity_delay = 0,
2219 .output_mode = OUTMODE_MPEG2_FIFO,
2223 static struct dib7000p_config tfe7090pvr_dib7000p_config[2] = {
2225 .output_mpeg2_in_188_bytes = 1,
2226 .hostbus_diversity = 1,
2227 .tuner_is_baseband = 1,
2230 .agc_config_count = 2,
2231 .agc = dib7090_agc_config,
2233 .bw = &dib7090_clock_config_12_mhz,
2235 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
2236 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
2237 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
2241 .agc_control = dib7090_agc_restart,
2244 .disable_sample_and_hold = 0,
2245 .enable_current_mirror = 0,
2246 .diversity_delay = 0,
2248 .output_mode = OUTMODE_MPEG2_PAR_GATED_CLK,
2249 .default_i2c_addr = 0x90,
2252 .output_mpeg2_in_188_bytes = 1,
2253 .hostbus_diversity = 1,
2254 .tuner_is_baseband = 1,
2257 .agc_config_count = 2,
2258 .agc = dib7090_agc_config,
2260 .bw = &dib7090_clock_config_12_mhz,
2262 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
2263 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
2264 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
2268 .agc_control = dib7090_agc_restart,
2271 .disable_sample_and_hold = 0,
2272 .enable_current_mirror = 0,
2273 .diversity_delay = 0,
2275 .output_mode = OUTMODE_MPEG2_PAR_GATED_CLK,
2276 .default_i2c_addr = 0x92,
2281 static const struct dib0090_config nim7090_dib0090_config = {
2282 .io.clock_khz = 12000,
2286 .io.pll_loopdiv = 6,
2287 .io.adc_clock_ratio = 0,
2288 .io.pll_int_loop_filt = 0,
2289 .reset = dib7090_tuner_sleep,
2290 .sleep = dib7090_tuner_sleep,
2292 .freq_offset_khz_uhf = 0,
2293 .freq_offset_khz_vhf = 0,
2295 .get_adc_power = dib7090_get_adc_power,
2300 .wbd_vhf_offset = 0,
2301 .wbd_cband_offset = 0,
2305 .fref_clock_ratio = 0,
2307 .wbd = dib7090_wbd_table,
2309 .ls_cfg_pad_drv = 0,
2315 static const struct dib0090_config tfe7090pvr_dib0090_config[2] = {
2317 .io.clock_khz = 12000,
2321 .io.pll_loopdiv = 6,
2322 .io.adc_clock_ratio = 0,
2323 .io.pll_int_loop_filt = 0,
2324 .reset = dib7090_tuner_sleep,
2325 .sleep = dib7090_tuner_sleep,
2327 .freq_offset_khz_uhf = 50,
2328 .freq_offset_khz_vhf = 70,
2330 .get_adc_power = dib7090_get_adc_power,
2335 .wbd_vhf_offset = 0,
2336 .wbd_cband_offset = 0,
2340 .fref_clock_ratio = 0,
2342 .wbd = dib7090_wbd_table,
2344 .ls_cfg_pad_drv = 0,
2349 .io.clock_khz = 12000,
2353 .io.pll_loopdiv = 6,
2354 .io.adc_clock_ratio = 0,
2355 .io.pll_int_loop_filt = 0,
2356 .reset = dib7090_tuner_sleep,
2357 .sleep = dib7090_tuner_sleep,
2359 .freq_offset_khz_uhf = -50,
2360 .freq_offset_khz_vhf = -70,
2362 .get_adc_power = dib7090_get_adc_power,
2367 .wbd_vhf_offset = 0,
2368 .wbd_cband_offset = 0,
2372 .fref_clock_ratio = 0,
2374 .wbd = dib7090_wbd_table,
2376 .ls_cfg_pad_drv = 0,
2383 static int nim7090_frontend_attach(struct dvb_usb_adapter *adap)
2385 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
2387 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
2388 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
2389 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
2390 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
2393 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
2395 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
2397 if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, &nim7090_dib7000p_config) != 0) {
2398 err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", __func__);
2401 adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80, &nim7090_dib7000p_config);
2403 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
2406 static int nim7090_tuner_attach(struct dvb_usb_adapter *adap)
2408 struct dib0700_adapter_state *st = adap->priv;
2409 struct i2c_adapter *tun_i2c = dib7090_get_i2c_tuner(adap->fe_adap[0].fe);
2411 if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &nim7090_dib0090_config) == NULL)
2414 dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
2416 st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
2417 adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup;
2421 static int tfe7090pvr_frontend0_attach(struct dvb_usb_adapter *adap)
2423 struct dib0700_state *st = adap->dev->priv;
2425 /* The TFE7090 requires the dib0700 to not be in master mode */
2426 st->disable_streaming_master_mode = 1;
2428 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
2430 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
2431 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
2432 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
2433 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
2436 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
2438 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
2440 /* initialize IC 0 */
2441 if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x20, &tfe7090pvr_dib7000p_config[0]) != 0) {
2442 err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", __func__);
2446 dib0700_set_i2c_speed(adap->dev, 340);
2447 adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x90, &tfe7090pvr_dib7000p_config[0]);
2448 if (adap->fe_adap[0].fe == NULL)
2451 dib7090_slave_reset(adap->fe_adap[0].fe);
2456 static int tfe7090pvr_frontend1_attach(struct dvb_usb_adapter *adap)
2458 struct i2c_adapter *i2c;
2460 if (adap->dev->adapter[0].fe_adap[0].fe == NULL) {
2461 err("the master dib7090 has to be initialized first");
2462 return -ENODEV; /* the master device has not been initialized */
2465 i2c = dib7000p_get_i2c_master(adap->dev->adapter[0].fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_6_7, 1);
2466 if (dib7000p_i2c_enumeration(i2c, 1, 0x10, &tfe7090pvr_dib7000p_config[1]) != 0) {
2467 err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", __func__);
2471 adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, i2c, 0x92, &tfe7090pvr_dib7000p_config[1]);
2472 dib0700_set_i2c_speed(adap->dev, 200);
2474 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
2477 static int tfe7090pvr_tuner0_attach(struct dvb_usb_adapter *adap)
2479 struct dib0700_adapter_state *st = adap->priv;
2480 struct i2c_adapter *tun_i2c = dib7090_get_i2c_tuner(adap->fe_adap[0].fe);
2482 if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &tfe7090pvr_dib0090_config[0]) == NULL)
2485 dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
2487 st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
2488 adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup;
2492 static int tfe7090pvr_tuner1_attach(struct dvb_usb_adapter *adap)
2494 struct dib0700_adapter_state *st = adap->priv;
2495 struct i2c_adapter *tun_i2c = dib7090_get_i2c_tuner(adap->fe_adap[0].fe);
2497 if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &tfe7090pvr_dib0090_config[1]) == NULL)
2500 dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
2502 st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
2503 adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup;
2508 static struct dib7000p_config stk7070pd_dib7000p_config[2] = {
2510 .output_mpeg2_in_188_bytes = 1,
2512 .agc_config_count = 1,
2513 .agc = &dib7070_agc_config,
2514 .bw = &dib7070_bw_config_12_mhz,
2515 .tuner_is_baseband = 1,
2518 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
2519 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
2520 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
2522 .hostbus_diversity = 1,
2524 .output_mpeg2_in_188_bytes = 1,
2526 .agc_config_count = 1,
2527 .agc = &dib7070_agc_config,
2528 .bw = &dib7070_bw_config_12_mhz,
2529 .tuner_is_baseband = 1,
2532 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
2533 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
2534 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
2536 .hostbus_diversity = 1,
2540 static int stk7070pd_frontend_attach0(struct dvb_usb_adapter *adap)
2542 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
2544 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
2545 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
2546 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
2547 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
2549 dib0700_ctrl_clock(adap->dev, 72, 1);
2552 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
2554 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
2556 if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 2, 18,
2557 stk7070pd_dib7000p_config) != 0) {
2558 err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n",
2563 adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80, &stk7070pd_dib7000p_config[0]);
2564 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
2567 static int stk7070pd_frontend_attach1(struct dvb_usb_adapter *adap)
2569 adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x82, &stk7070pd_dib7000p_config[1]);
2570 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
2574 static struct s5h1411_config pinnacle_801e_config = {
2575 .output_mode = S5H1411_PARALLEL_OUTPUT,
2576 .gpio = S5H1411_GPIO_OFF,
2577 .mpeg_timing = S5H1411_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK,
2578 .qam_if = S5H1411_IF_44000,
2579 .vsb_if = S5H1411_IF_44000,
2580 .inversion = S5H1411_INVERSION_OFF,
2581 .status_mode = S5H1411_DEMODLOCKING
2584 /* Pinnacle PCTV HD Pro 801e GPIOs map:
2585 GPIO0 - currently unknown
2586 GPIO1 - xc5000 tuner reset
2587 GPIO2 - CX25843 sleep
2588 GPIO3 - currently unknown
2589 GPIO4 - currently unknown
2590 GPIO6 - currently unknown
2591 GPIO7 - currently unknown
2592 GPIO9 - currently unknown
2593 GPIO10 - CX25843 reset
2595 static int s5h1411_frontend_attach(struct dvb_usb_adapter *adap)
2597 struct dib0700_state *st = adap->dev->priv;
2599 /* Make use of the new i2c functions from FW 1.20 */
2600 st->fw_use_new_i2c_api = 1;
2602 /* The s5h1411 requires the dib0700 to not be in master mode */
2603 st->disable_streaming_master_mode = 1;
2605 /* All msleep values taken from Windows USB trace */
2606 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 0);
2607 dib0700_set_gpio(adap->dev, GPIO3, GPIO_OUT, 0);
2608 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
2610 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
2612 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
2614 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
2615 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
2616 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
2617 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
2618 dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 0);
2621 /* Put the CX25843 to sleep for now since we're in digital mode */
2622 dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 1);
2624 /* GPIOs are initialized, do the attach */
2625 adap->fe_adap[0].fe = dvb_attach(s5h1411_attach, &pinnacle_801e_config,
2626 &adap->dev->i2c_adap);
2627 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
2630 static int dib0700_xc5000_tuner_callback(void *priv, int component,
2631 int command, int arg)
2633 struct dvb_usb_adapter *adap = priv;
2635 if (command == XC5000_TUNER_RESET) {
2636 /* Reset the tuner */
2637 dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 0);
2639 dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 1);
2642 err("xc5000: unknown tuner callback command: %d\n", command);
2649 static struct xc5000_config s5h1411_xc5000_tunerconfig = {
2650 .i2c_address = 0x64,
2654 static int xc5000_tuner_attach(struct dvb_usb_adapter *adap)
2656 /* FIXME: generalize & move to common area */
2657 adap->fe_adap[0].fe->callback = dib0700_xc5000_tuner_callback;
2659 return dvb_attach(xc5000_attach, adap->fe_adap[0].fe, &adap->dev->i2c_adap,
2660 &s5h1411_xc5000_tunerconfig)
2661 == NULL ? -ENODEV : 0;
2664 static int dib0700_xc4000_tuner_callback(void *priv, int component,
2665 int command, int arg)
2667 struct dvb_usb_adapter *adap = priv;
2669 if (command == XC4000_TUNER_RESET) {
2670 /* Reset the tuner */
2671 dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 0);
2673 dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
2675 err("xc4000: unknown tuner callback command: %d\n", command);
2682 static struct dibx000_agc_config stk7700p_7000p_xc4000_agc_config = {
2683 .band_caps = BAND_UHF | BAND_VHF,
2686 .time_stabiliz = 0x15,
2687 .alpha_level = 0x00,
2700 .agc1_slope1 = 0x00,
2701 .agc1_slope2 = 0x00,
2704 .agc2_slope1 = 0x1d,
2705 .agc2_slope2 = 0x1d,
2710 .perform_agc_softsplit = 0x00,
2713 static struct dibx000_bandwidth_config stk7700p_xc4000_pll_config = {
2714 60000, 30000, /* internal, sampling */
2715 1, 8, 3, 1, 0, /* pll_cfg: prediv, ratio, range, reset, bypass */
2716 0, 0, 1, 1, 0, /* misc: refdiv, bypclk_div, IO_CLK_en_core, */
2717 /* ADClkSrc, modulo */
2718 (3 << 14) | (1 << 12) | 524, /* sad_cfg: refsel, sel, freq_15k */
2719 39370534, /* ifreq */
2720 20452225, /* timf */
2724 /* FIXME: none of these inputs are validated yet */
2725 static struct dib7000p_config pctv_340e_config = {
2726 .output_mpeg2_in_188_bytes = 1,
2728 .agc_config_count = 1,
2729 .agc = &stk7700p_7000p_xc4000_agc_config,
2730 .bw = &stk7700p_xc4000_pll_config,
2732 .gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
2733 .gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
2734 .gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS,
2737 /* PCTV 340e GPIOs map:
2739 GPIO2 - CX25843 sleep
2740 GPIO3 - CS5340 reset
2742 GPIO6 - Power Supply
2743 GPIO8 - LNA (1=off 0=on)
2744 GPIO10 - CX25843 reset
2746 GPIO8 - xc4000 reset
2748 static int pctv340e_frontend_attach(struct dvb_usb_adapter *adap)
2750 struct dib0700_state *st = adap->dev->priv;
2752 /* Power Supply on */
2753 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
2755 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
2756 msleep(100); /* Allow power supply to settle before probing */
2759 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
2760 msleep(1); /* cx25843 datasheet say 350us required */
2761 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
2763 /* LNA off for now */
2764 dib0700_set_gpio(adap->dev, GPIO8, GPIO_OUT, 1);
2766 /* Put the CX25843 to sleep for now since we're in digital mode */
2767 dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 1);
2769 /* FIXME: not verified yet */
2770 dib0700_ctrl_clock(adap->dev, 72, 1);
2774 if (dib7000pc_detection(&adap->dev->i2c_adap) == 0) {
2775 /* Demodulator not found for some reason? */
2779 adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x12,
2781 st->is_dib7000pc = 1;
2783 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
2786 static struct xc4000_config dib7000p_xc4000_tunerconfig = {
2787 .i2c_address = 0x61,
2790 .set_smoothedcvbs = 0,
2794 static int xc4000_tuner_attach(struct dvb_usb_adapter *adap)
2796 struct i2c_adapter *tun_i2c;
2798 /* The xc4000 is not on the main i2c bus */
2799 tun_i2c = dib7000p_get_i2c_master(adap->fe_adap[0].fe,
2800 DIBX000_I2C_INTERFACE_TUNER, 1);
2801 if (tun_i2c == NULL) {
2802 printk(KERN_ERR "Could not reach tuner i2c bus\n");
2806 /* Setup the reset callback */
2807 adap->fe_adap[0].fe->callback = dib0700_xc4000_tuner_callback;
2809 return dvb_attach(xc4000_attach, adap->fe_adap[0].fe, tun_i2c,
2810 &dib7000p_xc4000_tunerconfig)
2811 == NULL ? -ENODEV : 0;
2814 static struct lgdt3305_config hcw_lgdt3305_config = {
2816 .mpeg_mode = LGDT3305_MPEG_PARALLEL,
2817 .tpclk_edge = LGDT3305_TPCLK_FALLING_EDGE,
2818 .tpvalid_polarity = LGDT3305_TP_VALID_LOW,
2820 .spectral_inversion = 1,
2823 .usref_8vsb = 0x0500,
2826 static struct mxl5007t_config hcw_mxl5007t_config = {
2827 .xtal_freq_hz = MxL_XTAL_25_MHZ,
2828 .if_freq_hz = MxL_IF_6_MHZ,
2833 GPIO0 - LNA_CTR (H: LNA power enabled, L: LNA power disabled)
2834 GPIO1 - ANT_SEL (H: VPA, L: MCX)
2840 MXL is behind LG's i2c repeater. LG is on SCL2/SDA2 gpios on the DIB
2842 static int lgdt3305_frontend_attach(struct dvb_usb_adapter *adap)
2844 struct dib0700_state *st = adap->dev->priv;
2846 /* Make use of the new i2c functions from FW 1.20 */
2847 st->fw_use_new_i2c_api = 1;
2849 st->disable_streaming_master_mode = 1;
2851 /* fe power enable */
2852 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
2854 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
2858 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
2860 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
2862 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
2865 adap->fe_adap[0].fe = dvb_attach(lgdt3305_attach,
2866 &hcw_lgdt3305_config,
2867 &adap->dev->i2c_adap);
2869 return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
2872 static int mxl5007t_tuner_attach(struct dvb_usb_adapter *adap)
2874 return dvb_attach(mxl5007t_attach, adap->fe_adap[0].fe,
2875 &adap->dev->i2c_adap, 0x60,
2876 &hcw_mxl5007t_config) == NULL ? -ENODEV : 0;
2880 /* DVB-USB and USB stuff follows */
2881 struct usb_device_id dib0700_usb_id_table[] = {
2882 /* 0 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P) },
2883 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P_PC) },
2884 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500) },
2885 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_2) },
2886 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK) },
2887 /* 5 */ { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR) },
2888 { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_VIDEOMATE_U500) },
2889 { USB_DEVICE(USB_VID_UNIWILL, USB_PID_UNIWILL_STK7700P) },
2890 { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_STK7700P) },
2891 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK_2) },
2892 /* 10 */{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_2) },
2893 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV2000E) },
2894 { USB_DEVICE(USB_VID_TERRATEC,
2895 USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY) },
2896 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK) },
2897 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700D) },
2898 /* 15 */{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7070P) },
2899 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV_DVB_T_FLASH) },
2900 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7070PD) },
2901 { USB_DEVICE(USB_VID_PINNACLE,
2902 USB_PID_PINNACLE_PCTV_DUAL_DIVERSITY_DVB_T) },
2903 { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_VIDEOMATE_U500_PC) },
2904 /* 20 */{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_EXPRESS) },
2905 { USB_DEVICE(USB_VID_GIGABYTE, USB_PID_GIGABYTE_U7000) },
2906 { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ARTEC_T14BR) },
2907 { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3000) },
2908 { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3100) },
2909 /* 25 */{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK_3) },
2910 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_MYTV_T) },
2911 { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_HT_USB_XE) },
2912 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_EXPRESSCARD_320CX) },
2913 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV72E) },
2914 /* 30 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV73E) },
2915 { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_EC372S) },
2916 { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_HT_EXPRESS) },
2917 { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_XXS) },
2918 { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_STK7700P_2) },
2919 /* 35 */{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK_52009) },
2920 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_3) },
2921 { USB_DEVICE(USB_VID_GIGABYTE, USB_PID_GIGABYTE_U8000) },
2922 { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700PH) },
2923 { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3000H) },
2924 /* 40 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV801E) },
2925 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV801E_SE) },
2926 { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_EXPRESS) },
2927 { USB_DEVICE(USB_VID_TERRATEC,
2928 USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY_2) },
2929 { USB_DEVICE(USB_VID_SONY, USB_PID_SONY_PLAYTV) },
2930 /* 45 */{ USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_PD378S) },
2931 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_TIGER_ATSC) },
2932 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_TIGER_ATSC_B210) },
2933 { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_MC770) },
2934 { USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DTT) },
2935 /* 50 */{ USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DTT_Dlx) },
2936 { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_H) },
2937 { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_T3) },
2938 { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_T5) },
2939 { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700D) },
2940 /* 55 */{ USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700D_2) },
2941 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV73A) },
2942 { USB_DEVICE(USB_VID_PCTV, USB_PID_PINNACLE_PCTV73ESE) },
2943 { USB_DEVICE(USB_VID_PCTV, USB_PID_PINNACLE_PCTV282E) },
2944 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7770P) },
2945 /* 60 */{ USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_XXS_2) },
2946 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK807XPVR) },
2947 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK807XP) },
2948 { USB_DEVICE_VER(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD, 0x000, 0x3f00) },
2949 { USB_DEVICE(USB_VID_EVOLUTEPC, USB_PID_TVWAY_PLUS) },
2950 /* 65 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV73ESE) },
2951 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV282E) },
2952 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK8096GP) },
2953 { USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DIVERSITY) },
2954 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_NIM9090M) },
2955 /* 70 */{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_NIM8096MD) },
2956 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_NIM9090MD) },
2957 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_NIM7090) },
2958 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_TFE7090PVR) },
2959 { USB_DEVICE(USB_VID_TECHNISAT, USB_PID_TECHNISAT_AIRSTAR_TELESTICK_2) },
2960 /* 75 */{ USB_DEVICE(USB_VID_MEDION, USB_PID_CREATIX_CTX1921) },
2961 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV340E) },
2962 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV340E_SE) },
2963 { 0 } /* Terminating entry */
2965 MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
2967 #define DIB0700_DEFAULT_DEVICE_PROPERTIES \
2968 .caps = DVB_USB_IS_AN_I2C_ADAPTER, \
2969 .usb_ctrl = DEVICE_SPECIFIC, \
2970 .firmware = "dvb-usb-dib0700-1.20.fw", \
2971 .download_firmware = dib0700_download_firmware, \
2972 .no_reconnect = 1, \
2973 .size_of_priv = sizeof(struct dib0700_state), \
2974 .i2c_algo = &dib0700_i2c_algo, \
2975 .identify_state = dib0700_identify_state
2977 #define DIB0700_DEFAULT_STREAMING_CONFIG(ep) \
2978 .streaming_ctrl = dib0700_streaming_ctrl, \
2985 .buffersize = 39480, \
2990 struct dvb_usb_device_properties dib0700_devices[] = {
2992 DIB0700_DEFAULT_DEVICE_PROPERTIES,
2999 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
3000 .pid_filter_count = 32,
3001 .pid_filter = stk7700p_pid_filter,
3002 .pid_filter_ctrl = stk7700p_pid_filter_ctrl,
3003 .frontend_attach = stk7700p_frontend_attach,
3004 .tuner_attach = stk7700p_tuner_attach,
3006 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
3011 .num_device_descs = 8,
3013 { "DiBcom STK7700P reference design",
3014 { &dib0700_usb_id_table[0], &dib0700_usb_id_table[1] },
3017 { "Hauppauge Nova-T Stick",
3018 { &dib0700_usb_id_table[4], &dib0700_usb_id_table[9], NULL },
3021 { "AVerMedia AVerTV DVB-T Volar",
3022 { &dib0700_usb_id_table[5], &dib0700_usb_id_table[10] },
3025 { "Compro Videomate U500",
3026 { &dib0700_usb_id_table[6], &dib0700_usb_id_table[19] },
3029 { "Uniwill STK7700P based (Hama and others)",
3030 { &dib0700_usb_id_table[7], NULL },
3033 { "Leadtek Winfast DTV Dongle (STK7700P based)",
3034 { &dib0700_usb_id_table[8], &dib0700_usb_id_table[34] },
3037 { "AVerMedia AVerTV DVB-T Express",
3038 { &dib0700_usb_id_table[20] },
3042 { &dib0700_usb_id_table[21], NULL },
3048 .rc_interval = DEFAULT_RC_INTERVAL,
3049 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
3050 .rc_query = dib0700_rc_query_old_firmware,
3051 .allowed_protos = RC_TYPE_RC5 |
3054 .change_protocol = dib0700_change_protocol,
3056 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
3063 .frontend_attach = bristol_frontend_attach,
3064 .tuner_attach = bristol_tuner_attach,
3066 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
3071 .frontend_attach = bristol_frontend_attach,
3072 .tuner_attach = bristol_tuner_attach,
3074 DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
3079 .num_device_descs = 1,
3081 { "Hauppauge Nova-T 500 Dual DVB-T",
3082 { &dib0700_usb_id_table[2], &dib0700_usb_id_table[3], NULL },
3088 .rc_interval = DEFAULT_RC_INTERVAL,
3089 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
3090 .rc_query = dib0700_rc_query_old_firmware,
3091 .allowed_protos = RC_TYPE_RC5 |
3094 .change_protocol = dib0700_change_protocol,
3096 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
3103 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
3104 .pid_filter_count = 32,
3105 .pid_filter = stk70x0p_pid_filter,
3106 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
3107 .frontend_attach = stk7700d_frontend_attach,
3108 .tuner_attach = stk7700d_tuner_attach,
3110 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
3115 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
3116 .pid_filter_count = 32,
3117 .pid_filter = stk70x0p_pid_filter,
3118 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
3119 .frontend_attach = stk7700d_frontend_attach,
3120 .tuner_attach = stk7700d_tuner_attach,
3122 DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
3127 .num_device_descs = 5,
3129 { "Pinnacle PCTV 2000e",
3130 { &dib0700_usb_id_table[11], NULL },
3133 { "Terratec Cinergy DT XS Diversity",
3134 { &dib0700_usb_id_table[12], NULL },
3137 { "Hauppauge Nova-TD Stick/Elgato Eye-TV Diversity",
3138 { &dib0700_usb_id_table[13], NULL },
3141 { "DiBcom STK7700D reference design",
3142 { &dib0700_usb_id_table[14], NULL },
3145 { "YUAN High-Tech DiBcom STK7700D",
3146 { &dib0700_usb_id_table[55], NULL },
3153 .rc_interval = DEFAULT_RC_INTERVAL,
3154 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
3155 .rc_query = dib0700_rc_query_old_firmware,
3156 .allowed_protos = RC_TYPE_RC5 |
3159 .change_protocol = dib0700_change_protocol,
3161 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
3168 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
3169 .pid_filter_count = 32,
3170 .pid_filter = stk70x0p_pid_filter,
3171 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
3172 .frontend_attach = stk7700P2_frontend_attach,
3173 .tuner_attach = stk7700d_tuner_attach,
3175 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
3180 .num_device_descs = 3,
3182 { "ASUS My Cinema U3000 Mini DVBT Tuner",
3183 { &dib0700_usb_id_table[23], NULL },
3187 { &dib0700_usb_id_table[31], NULL },
3190 { "Terratec Cinergy T Express",
3191 { &dib0700_usb_id_table[42], NULL },
3197 .rc_interval = DEFAULT_RC_INTERVAL,
3198 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
3199 .module_name = "dib0700",
3200 .rc_query = dib0700_rc_query_old_firmware,
3201 .allowed_protos = RC_TYPE_RC5 |
3204 .change_protocol = dib0700_change_protocol,
3206 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
3213 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
3214 .pid_filter_count = 32,
3215 .pid_filter = stk70x0p_pid_filter,
3216 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
3217 .frontend_attach = stk7070p_frontend_attach,
3218 .tuner_attach = dib7070p_tuner_attach,
3220 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
3222 .size_of_priv = sizeof(struct dib0700_adapter_state),
3226 .num_device_descs = 11,
3228 { "DiBcom STK7070P reference design",
3229 { &dib0700_usb_id_table[15], NULL },
3232 { "Pinnacle PCTV DVB-T Flash Stick",
3233 { &dib0700_usb_id_table[16], NULL },
3236 { "Artec T14BR DVB-T",
3237 { &dib0700_usb_id_table[22], NULL },
3240 { "ASUS My Cinema U3100 Mini DVBT Tuner",
3241 { &dib0700_usb_id_table[24], NULL },
3244 { "Hauppauge Nova-T Stick",
3245 { &dib0700_usb_id_table[25], NULL },
3248 { "Hauppauge Nova-T MyTV.t",
3249 { &dib0700_usb_id_table[26], NULL },
3252 { "Pinnacle PCTV 72e",
3253 { &dib0700_usb_id_table[29], NULL },
3256 { "Pinnacle PCTV 73e",
3257 { &dib0700_usb_id_table[30], NULL },
3260 { "Elgato EyeTV DTT",
3261 { &dib0700_usb_id_table[49], NULL },
3265 { &dib0700_usb_id_table[45], NULL },
3268 { "Elgato EyeTV Dtt Dlx PD378S",
3269 { &dib0700_usb_id_table[50], NULL },
3275 .rc_interval = DEFAULT_RC_INTERVAL,
3276 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
3277 .module_name = "dib0700",
3278 .rc_query = dib0700_rc_query_old_firmware,
3279 .allowed_protos = RC_TYPE_RC5 |
3282 .change_protocol = dib0700_change_protocol,
3284 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
3291 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
3292 .pid_filter_count = 32,
3293 .pid_filter = stk70x0p_pid_filter,
3294 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
3295 .frontend_attach = stk7070p_frontend_attach,
3296 .tuner_attach = dib7070p_tuner_attach,
3298 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
3300 .size_of_priv = sizeof(struct dib0700_adapter_state),
3304 .num_device_descs = 3,
3306 { "Pinnacle PCTV 73A",
3307 { &dib0700_usb_id_table[56], NULL },
3310 { "Pinnacle PCTV 73e SE",
3311 { &dib0700_usb_id_table[57], &dib0700_usb_id_table[65], NULL },
3314 { "Pinnacle PCTV 282e",
3315 { &dib0700_usb_id_table[58], &dib0700_usb_id_table[66], NULL },
3321 .rc_interval = DEFAULT_RC_INTERVAL,
3322 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
3323 .module_name = "dib0700",
3324 .rc_query = dib0700_rc_query_old_firmware,
3325 .allowed_protos = RC_TYPE_RC5 |
3328 .change_protocol = dib0700_change_protocol,
3330 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
3337 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
3338 .pid_filter_count = 32,
3339 .pid_filter = stk70x0p_pid_filter,
3340 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
3341 .frontend_attach = stk7070pd_frontend_attach0,
3342 .tuner_attach = dib7070p_tuner_attach,
3344 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
3346 .size_of_priv = sizeof(struct dib0700_adapter_state),
3350 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
3351 .pid_filter_count = 32,
3352 .pid_filter = stk70x0p_pid_filter,
3353 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
3354 .frontend_attach = stk7070pd_frontend_attach1,
3355 .tuner_attach = dib7070p_tuner_attach,
3357 DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
3359 .size_of_priv = sizeof(struct dib0700_adapter_state),
3363 .num_device_descs = 6,
3365 { "DiBcom STK7070PD reference design",
3366 { &dib0700_usb_id_table[17], NULL },
3369 { "Pinnacle PCTV Dual DVB-T Diversity Stick",
3370 { &dib0700_usb_id_table[18], NULL },
3373 { "Hauppauge Nova-TD Stick (52009)",
3374 { &dib0700_usb_id_table[35], NULL },
3377 { "Hauppauge Nova-TD-500 (84xxx)",
3378 { &dib0700_usb_id_table[36], NULL },
3381 { "Terratec Cinergy DT USB XS Diversity/ T5",
3382 { &dib0700_usb_id_table[43],
3383 &dib0700_usb_id_table[53], NULL},
3387 { &dib0700_usb_id_table[44], NULL },
3393 .rc_interval = DEFAULT_RC_INTERVAL,
3394 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
3395 .module_name = "dib0700",
3396 .rc_query = dib0700_rc_query_old_firmware,
3397 .allowed_protos = RC_TYPE_RC5 |
3400 .change_protocol = dib0700_change_protocol,
3402 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
3409 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
3410 .pid_filter_count = 32,
3411 .pid_filter = stk70x0p_pid_filter,
3412 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
3413 .frontend_attach = stk7070pd_frontend_attach0,
3414 .tuner_attach = dib7070p_tuner_attach,
3416 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
3418 .size_of_priv = sizeof(struct dib0700_adapter_state),
3422 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
3423 .pid_filter_count = 32,
3424 .pid_filter = stk70x0p_pid_filter,
3425 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
3426 .frontend_attach = stk7070pd_frontend_attach1,
3427 .tuner_attach = dib7070p_tuner_attach,
3429 DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
3431 .size_of_priv = sizeof(struct dib0700_adapter_state),
3435 .num_device_descs = 1,
3437 { "Elgato EyeTV Diversity",
3438 { &dib0700_usb_id_table[68], NULL },
3444 .rc_interval = DEFAULT_RC_INTERVAL,
3445 .rc_codes = RC_MAP_DIB0700_NEC_TABLE,
3446 .module_name = "dib0700",
3447 .rc_query = dib0700_rc_query_old_firmware,
3448 .allowed_protos = RC_TYPE_RC5 |
3451 .change_protocol = dib0700_change_protocol,
3453 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
3460 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
3461 .pid_filter_count = 32,
3462 .pid_filter = stk70x0p_pid_filter,
3463 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
3464 .frontend_attach = stk7700ph_frontend_attach,
3465 .tuner_attach = stk7700ph_tuner_attach,
3467 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
3469 .size_of_priv = sizeof(struct
3470 dib0700_adapter_state),
3474 .num_device_descs = 9,
3476 { "Terratec Cinergy HT USB XE",
3477 { &dib0700_usb_id_table[27], NULL },
3480 { "Pinnacle Expresscard 320cx",
3481 { &dib0700_usb_id_table[28], NULL },
3484 { "Terratec Cinergy HT Express",
3485 { &dib0700_usb_id_table[32], NULL },
3488 { "Gigabyte U8000-RH",
3489 { &dib0700_usb_id_table[37], NULL },
3492 { "YUAN High-Tech STK7700PH",
3493 { &dib0700_usb_id_table[38], NULL },
3496 { "Asus My Cinema-U3000Hybrid",
3497 { &dib0700_usb_id_table[39], NULL },
3500 { "YUAN High-Tech MC770",
3501 { &dib0700_usb_id_table[48], NULL },
3504 { "Leadtek WinFast DTV Dongle H",
3505 { &dib0700_usb_id_table[51], NULL },
3508 { "YUAN High-Tech STK7700D",
3509 { &dib0700_usb_id_table[54], NULL },
3515 .rc_interval = DEFAULT_RC_INTERVAL,
3516 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
3517 .module_name = "dib0700",
3518 .rc_query = dib0700_rc_query_old_firmware,
3519 .allowed_protos = RC_TYPE_RC5 |
3522 .change_protocol = dib0700_change_protocol,
3524 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
3530 .frontend_attach = s5h1411_frontend_attach,
3531 .tuner_attach = xc5000_tuner_attach,
3533 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
3535 .size_of_priv = sizeof(struct
3536 dib0700_adapter_state),
3540 .num_device_descs = 2,
3542 { "Pinnacle PCTV HD Pro USB Stick",
3543 { &dib0700_usb_id_table[40], NULL },
3546 { "Pinnacle PCTV HD USB Stick",
3547 { &dib0700_usb_id_table[41], NULL },
3553 .rc_interval = DEFAULT_RC_INTERVAL,
3554 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
3555 .module_name = "dib0700",
3556 .rc_query = dib0700_rc_query_old_firmware,
3557 .allowed_protos = RC_TYPE_RC5 |
3560 .change_protocol = dib0700_change_protocol,
3562 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
3568 .frontend_attach = lgdt3305_frontend_attach,
3569 .tuner_attach = mxl5007t_tuner_attach,
3571 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
3573 .size_of_priv = sizeof(struct
3574 dib0700_adapter_state),
3578 .num_device_descs = 2,
3580 { "Hauppauge ATSC MiniCard (B200)",
3581 { &dib0700_usb_id_table[46], NULL },
3584 { "Hauppauge ATSC MiniCard (B210)",
3585 { &dib0700_usb_id_table[47], NULL },
3589 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
3596 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
3597 .pid_filter_count = 32,
3598 .pid_filter = stk70x0p_pid_filter,
3599 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
3600 .frontend_attach = stk7770p_frontend_attach,
3601 .tuner_attach = dib7770p_tuner_attach,
3603 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
3606 sizeof(struct dib0700_adapter_state),
3610 .num_device_descs = 4,
3612 { "DiBcom STK7770P reference design",
3613 { &dib0700_usb_id_table[59], NULL },
3616 { "Terratec Cinergy T USB XXS (HD)/ T3",
3617 { &dib0700_usb_id_table[33],
3618 &dib0700_usb_id_table[52],
3619 &dib0700_usb_id_table[60], NULL},
3622 { "TechniSat AirStar TeleStick 2",
3623 { &dib0700_usb_id_table[74], NULL },
3626 { "Medion CTX1921 DVB-T USB",
3627 { &dib0700_usb_id_table[75], NULL },
3633 .rc_interval = DEFAULT_RC_INTERVAL,
3634 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
3635 .module_name = "dib0700",
3636 .rc_query = dib0700_rc_query_old_firmware,
3637 .allowed_protos = RC_TYPE_RC5 |
3640 .change_protocol = dib0700_change_protocol,
3642 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
3648 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
3649 .pid_filter_count = 32,
3650 .pid_filter = stk80xx_pid_filter,
3651 .pid_filter_ctrl = stk80xx_pid_filter_ctrl,
3652 .frontend_attach = stk807x_frontend_attach,
3653 .tuner_attach = dib807x_tuner_attach,
3655 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
3658 sizeof(struct dib0700_adapter_state),
3662 .num_device_descs = 3,
3664 { "DiBcom STK807xP reference design",
3665 { &dib0700_usb_id_table[62], NULL },
3668 { "Prolink Pixelview SBTVD",
3669 { &dib0700_usb_id_table[63], NULL },
3672 { "EvolutePC TVWay+",
3673 { &dib0700_usb_id_table[64], NULL },
3679 .rc_interval = DEFAULT_RC_INTERVAL,
3680 .rc_codes = RC_MAP_DIB0700_NEC_TABLE,
3681 .module_name = "dib0700",
3682 .rc_query = dib0700_rc_query_old_firmware,
3683 .allowed_protos = RC_TYPE_RC5 |
3686 .change_protocol = dib0700_change_protocol,
3688 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
3694 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
3695 .pid_filter_count = 32,
3696 .pid_filter = stk80xx_pid_filter,
3697 .pid_filter_ctrl = stk80xx_pid_filter_ctrl,
3698 .frontend_attach = stk807xpvr_frontend_attach0,
3699 .tuner_attach = dib807x_tuner_attach,
3701 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
3704 sizeof(struct dib0700_adapter_state),
3709 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
3710 .pid_filter_count = 32,
3711 .pid_filter = stk80xx_pid_filter,
3712 .pid_filter_ctrl = stk80xx_pid_filter_ctrl,
3713 .frontend_attach = stk807xpvr_frontend_attach1,
3714 .tuner_attach = dib807x_tuner_attach,
3716 DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
3719 sizeof(struct dib0700_adapter_state),
3723 .num_device_descs = 1,
3725 { "DiBcom STK807xPVR reference design",
3726 { &dib0700_usb_id_table[61], NULL },
3732 .rc_interval = DEFAULT_RC_INTERVAL,
3733 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
3734 .module_name = "dib0700",
3735 .rc_query = dib0700_rc_query_old_firmware,
3736 .allowed_protos = RC_TYPE_RC5 |
3739 .change_protocol = dib0700_change_protocol,
3741 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
3747 .caps = DVB_USB_ADAP_HAS_PID_FILTER |
3748 DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
3749 .pid_filter_count = 32,
3750 .pid_filter = stk80xx_pid_filter,
3751 .pid_filter_ctrl = stk80xx_pid_filter_ctrl,
3752 .frontend_attach = stk809x_frontend_attach,
3753 .tuner_attach = dib809x_tuner_attach,
3755 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
3758 sizeof(struct dib0700_adapter_state),
3762 .num_device_descs = 1,
3764 { "DiBcom STK8096GP reference design",
3765 { &dib0700_usb_id_table[67], NULL },
3771 .rc_interval = DEFAULT_RC_INTERVAL,
3772 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
3773 .module_name = "dib0700",
3774 .rc_query = dib0700_rc_query_old_firmware,
3775 .allowed_protos = RC_TYPE_RC5 |
3778 .change_protocol = dib0700_change_protocol,
3780 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
3786 .caps = DVB_USB_ADAP_HAS_PID_FILTER |
3787 DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
3788 .pid_filter_count = 32,
3789 .pid_filter = dib90x0_pid_filter,
3790 .pid_filter_ctrl = dib90x0_pid_filter_ctrl,
3791 .frontend_attach = stk9090m_frontend_attach,
3792 .tuner_attach = dib9090_tuner_attach,
3794 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
3797 sizeof(struct dib0700_adapter_state),
3801 .num_device_descs = 1,
3803 { "DiBcom STK9090M reference design",
3804 { &dib0700_usb_id_table[69], NULL },
3810 .rc_interval = DEFAULT_RC_INTERVAL,
3811 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
3812 .module_name = "dib0700",
3813 .rc_query = dib0700_rc_query_old_firmware,
3814 .allowed_protos = RC_TYPE_RC5 |
3817 .change_protocol = dib0700_change_protocol,
3819 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
3825 .caps = DVB_USB_ADAP_HAS_PID_FILTER |
3826 DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
3827 .pid_filter_count = 32,
3828 .pid_filter = stk80xx_pid_filter,
3829 .pid_filter_ctrl = stk80xx_pid_filter_ctrl,
3830 .frontend_attach = nim8096md_frontend_attach,
3831 .tuner_attach = nim8096md_tuner_attach,
3833 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
3836 sizeof(struct dib0700_adapter_state),
3840 .num_device_descs = 1,
3842 { "DiBcom NIM8096MD reference design",
3843 { &dib0700_usb_id_table[70], NULL },
3849 .rc_interval = DEFAULT_RC_INTERVAL,
3850 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
3851 .module_name = "dib0700",
3852 .rc_query = dib0700_rc_query_old_firmware,
3853 .allowed_protos = RC_TYPE_RC5 |
3856 .change_protocol = dib0700_change_protocol,
3858 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
3864 .caps = DVB_USB_ADAP_HAS_PID_FILTER |
3865 DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
3866 .pid_filter_count = 32,
3867 .pid_filter = dib90x0_pid_filter,
3868 .pid_filter_ctrl = dib90x0_pid_filter_ctrl,
3869 .frontend_attach = nim9090md_frontend_attach,
3870 .tuner_attach = nim9090md_tuner_attach,
3872 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
3875 sizeof(struct dib0700_adapter_state),
3879 .num_device_descs = 1,
3881 { "DiBcom NIM9090MD reference design",
3882 { &dib0700_usb_id_table[71], NULL },
3888 .rc_interval = DEFAULT_RC_INTERVAL,
3889 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
3890 .module_name = "dib0700",
3891 .rc_query = dib0700_rc_query_old_firmware,
3892 .allowed_protos = RC_TYPE_RC5 |
3895 .change_protocol = dib0700_change_protocol,
3897 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
3903 .caps = DVB_USB_ADAP_HAS_PID_FILTER |
3904 DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
3905 .pid_filter_count = 32,
3906 .pid_filter = stk70x0p_pid_filter,
3907 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
3908 .frontend_attach = nim7090_frontend_attach,
3909 .tuner_attach = nim7090_tuner_attach,
3911 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
3914 sizeof(struct dib0700_adapter_state),
3918 .num_device_descs = 1,
3920 { "DiBcom NIM7090 reference design",
3921 { &dib0700_usb_id_table[72], NULL },
3927 .rc_interval = DEFAULT_RC_INTERVAL,
3928 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
3929 .module_name = "dib0700",
3930 .rc_query = dib0700_rc_query_old_firmware,
3931 .allowed_protos = RC_TYPE_RC5 |
3934 .change_protocol = dib0700_change_protocol,
3936 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
3942 .caps = DVB_USB_ADAP_HAS_PID_FILTER |
3943 DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
3944 .pid_filter_count = 32,
3945 .pid_filter = stk70x0p_pid_filter,
3946 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
3947 .frontend_attach = tfe7090pvr_frontend0_attach,
3948 .tuner_attach = tfe7090pvr_tuner0_attach,
3950 DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
3953 sizeof(struct dib0700_adapter_state),
3958 .caps = DVB_USB_ADAP_HAS_PID_FILTER |
3959 DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
3960 .pid_filter_count = 32,
3961 .pid_filter = stk70x0p_pid_filter,
3962 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
3963 .frontend_attach = tfe7090pvr_frontend1_attach,
3964 .tuner_attach = tfe7090pvr_tuner1_attach,
3966 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
3969 sizeof(struct dib0700_adapter_state),
3973 .num_device_descs = 1,
3975 { "DiBcom TFE7090PVR reference design",
3976 { &dib0700_usb_id_table[73], NULL },
3982 .rc_interval = DEFAULT_RC_INTERVAL,
3983 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
3984 .module_name = "dib0700",
3985 .rc_query = dib0700_rc_query_old_firmware,
3986 .allowed_protos = RC_TYPE_RC5 |
3989 .change_protocol = dib0700_change_protocol,
3991 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
3997 .frontend_attach = pctv340e_frontend_attach,
3998 .tuner_attach = xc4000_tuner_attach,
4000 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
4002 .size_of_priv = sizeof(struct
4003 dib0700_adapter_state),
4007 .num_device_descs = 2,
4009 { "Pinnacle PCTV 340e HD Pro USB Stick",
4010 { &dib0700_usb_id_table[76], NULL },
4013 { "Pinnacle PCTV Hybrid Stick Solo",
4014 { &dib0700_usb_id_table[77], NULL },
4019 .rc_interval = DEFAULT_RC_INTERVAL,
4020 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
4021 .module_name = "dib0700",
4022 .rc_query = dib0700_rc_query_old_firmware,
4023 .allowed_protos = RC_TYPE_RC5 |
4026 .change_protocol = dib0700_change_protocol,
4031 int dib0700_device_count = ARRAY_SIZE(dib0700_devices);