drivers/media/common/tuners/tuner-xc2028.c

   1 /* tuner-xc2028
   2  *
   3  * Copyright (c) 2007-2008 Mauro Carvalho Chehab (mchehab@infradead.org)
   4  *
   5  * Copyright (c) 2007 Michel Ludwig (michel.ludwig@gmail.com)
   6  *       - frontend interface
   7  *
   8  * This code is placed under the terms of the GNU General Public License v2
   9  */
  10
  11 #include <linux/i2c.h>
  12 #include <asm/div64.h>
  13 #include <linux/firmware.h>
  14 #include <linux/videodev2.h>
  15 #include <linux/delay.h>
  16 #include <media/tuner.h>
  17 #include <linux/mutex.h>
  18 #include <linux/slab.h>
  19 #include <asm/unaligned.h>
  20 #include "tuner-i2c.h"
  21 #include "tuner-xc2028.h"
  22 #include "tuner-xc2028-types.h"
  23
  24 #include <linux/dvb/frontend.h>
  25 #include "dvb_frontend.h"
  26
  27 /* Registers (Write-only) */
  28 #define XREG_INIT         0x00
  29 #define XREG_RF_FREQ      0x02
  30 #define XREG_POWER_DOWN   0x08
  31
  32 /* Registers (Read-only) */
  33 #define XREG_FREQ_ERROR   0x01
  34 #define XREG_LOCK         0x02
  35 #define XREG_VERSION      0x04
  36 #define XREG_PRODUCT_ID   0x08
  37 #define XREG_HSYNC_FREQ   0x10
  38 #define XREG_FRAME_LINES  0x20
  39 #define XREG_SNR          0x40
  40
  41 #define XREG_ADC_ENV      0x0100
  42
  43 static int debug;
  44 module_param(debug, int, 0644);
  45 MODULE_PARM_DESC(debug, "enable verbose debug messages");
  46
  47 static int no_poweroff;
  48 module_param(no_poweroff, int, 0644);
  49 MODULE_PARM_DESC(no_poweroff, "0 (default) powers device off when not used.\n"
  50         "1 keep device energized and with tuner ready all the times.\n"
  51         "  Faster, but consumes more power and keeps the device hotter\n");
  52
  53 static char audio_std[8];
  54 module_param_string(audio_std, audio_std, sizeof(audio_std), 0);
  55 MODULE_PARM_DESC(audio_std,
  56         "Audio standard. XC3028 audio decoder explicitly "
  57         "needs to know what audio\n"
  58         "standard is needed for some video standards with audio A2 or NICAM.\n"
  59         "The valid values are:\n"
  60         "A2\n"
  61         "A2/A\n"
  62         "A2/B\n"
  63         "NICAM\n"
  64         "NICAM/A\n"
  65         "NICAM/B\n");
  66
  67 static char firmware_name[30];
  68 module_param_string(firmware_name, firmware_name, sizeof(firmware_name), 0);
  69 MODULE_PARM_DESC(firmware_name, "Firmware file name. Allows overriding the "
  70                                 "default firmware name\n");
  71
  72 static LIST_HEAD(hybrid_tuner_instance_list);
  73 static DEFINE_MUTEX(xc2028_list_mutex);
  74
  75 /* struct for storing firmware table */
  76 struct firmware_description {
  77         unsigned int  type;
  78         v4l2_std_id   id;
  79         __u16         int_freq;
  80         unsigned char *ptr;
  81         unsigned int  size;
  82 };
  83
  84 struct firmware_properties {
  85         unsigned int    type;
  86         v4l2_std_id     id;
  87         v4l2_std_id     std_req;
  88         __u16           int_freq;
  89         unsigned int    scode_table;
  90         int             scode_nr;
  91 };
  92
  93 enum xc2028_state {
  94         XC2028_NO_FIRMWARE = 0,
  95         XC2028_WAITING_FIRMWARE,
  96         XC2028_ACTIVE,
  97         XC2028_SLEEP,
  98         XC2028_NODEV,
  99 };
 100
 101 struct xc2028_data {
 102         struct list_head        hybrid_tuner_instance_list;
 103         struct tuner_i2c_props  i2c_props;
 104         __u32                   frequency;
 105
 106         enum xc2028_state       state;
 107         const char              *fname;
 108
 109         struct firmware_description *firm;
 110         int                     firm_size;
 111         __u16                   firm_version;
 112
 113         __u16                   hwmodel;
 114         __u16                   hwvers;
 115
 116         struct xc2028_ctrl      ctrl;
 117
 118         struct firmware_properties cur_fw;
 119
 120         struct mutex lock;
 121 };
 122
 123 #define i2c_send(priv, buf, size) ({                                    \
 124         int _rc;                                                        \
 125         _rc = tuner_i2c_xfer_send(&priv->i2c_props, buf, size);         \
 126         if (size != _rc)                                                \
 127                 tuner_info("i2c output error: rc = %d (should be %d)\n",\
 128                            _rc, (int)size);                             \
 129         if (priv->ctrl.msleep)                                          \
 130                 msleep(priv->ctrl.msleep);                              \
 131         _rc;                                                            \
 132 })
 133
 134 #define i2c_rcv(priv, buf, size) ({                                     \
 135         int _rc;                                                        \
 136         _rc = tuner_i2c_xfer_recv(&priv->i2c_props, buf, size);         \
 137         if (size != _rc)                                                \
 138                 tuner_err("i2c input error: rc = %d (should be %d)\n",  \
 139                            _rc, (int)size);                             \
 140         _rc;                                                            \
 141 })
 142
 143 #define i2c_send_recv(priv, obuf, osize, ibuf, isize) ({                \
 144         int _rc;                                                        \
 145         _rc = tuner_i2c_xfer_send_recv(&priv->i2c_props, obuf, osize,   \
 146                                        ibuf, isize);                    \
 147         if (isize != _rc)                                               \
 148                 tuner_err("i2c input error: rc = %d (should be %d)\n",  \
 149                            _rc, (int)isize);                            \
 150         if (priv->ctrl.msleep)                                          \
 151                 msleep(priv->ctrl.msleep);                              \
 152         _rc;                                                            \
 153 })
 154
 155 #define send_seq(priv, data...) ({                                      \
 156         static u8 _val[] = data;                                        \
 157         int _rc;                                                        \
 158         if (sizeof(_val) !=                                             \
 159                         (_rc = tuner_i2c_xfer_send(&priv->i2c_props,    \
 160                                                 _val, sizeof(_val)))) { \
 161                 tuner_err("Error on line %d: %d\n", __LINE__, _rc);     \
 162         } else if (priv->ctrl.msleep)                                   \
 163                 msleep(priv->ctrl.msleep);                              \
 164         _rc;                                                            \
 165 })
 166
 167 static int xc2028_get_reg(struct xc2028_data *priv, u16 reg, u16 *val)
 168 {
 169         unsigned char buf[2];
 170         unsigned char ibuf[2];
 171
 172         tuner_dbg("%s %04x called\n", __func__, reg);
 173
 174         buf[0] = reg >> 8;
 175         buf[1] = (unsigned char) reg;
 176
 177         if (i2c_send_recv(priv, buf, 2, ibuf, 2) != 2)
 178                 return -EIO;
 179
 180         *val = (ibuf[1]) | (ibuf[0] << 8);
 181         return 0;
 182 }
 183
 184 #define dump_firm_type(t)       dump_firm_type_and_int_freq(t, 0)
 185 static void dump_firm_type_and_int_freq(unsigned int type, u16 int_freq)
 186 {
 187          if (type & BASE)
 188                 printk("BASE ");
 189          if (type & INIT1)
 190                 printk("INIT1 ");
 191          if (type & F8MHZ)
 192                 printk("F8MHZ ");
 193          if (type & MTS)
 194                 printk("MTS ");
 195          if (type & D2620)
 196                 printk("D2620 ");
 197          if (type & D2633)
 198                 printk("D2633 ");
 199          if (type & DTV6)
 200                 printk("DTV6 ");
 201          if (type & QAM)
 202                 printk("QAM ");
 203          if (type & DTV7)
 204                 printk("DTV7 ");
 205          if (type & DTV78)
 206                 printk("DTV78 ");
 207          if (type & DTV8)
 208                 printk("DTV8 ");
 209          if (type & FM)
 210                 printk("FM ");
 211          if (type & INPUT1)
 212                 printk("INPUT1 ");
 213          if (type & LCD)
 214                 printk("LCD ");
 215          if (type & NOGD)
 216                 printk("NOGD ");
 217          if (type & MONO)
 218                 printk("MONO ");
 219          if (type & ATSC)
 220                 printk("ATSC ");
 221          if (type & IF)
 222                 printk("IF ");
 223          if (type & LG60)
 224                 printk("LG60 ");
 225          if (type & ATI638)
 226                 printk("ATI638 ");
 227          if (type & OREN538)
 228                 printk("OREN538 ");
 229          if (type & OREN36)
 230                 printk("OREN36 ");
 231          if (type & TOYOTA388)
 232                 printk("TOYOTA388 ");
 233          if (type & TOYOTA794)
 234                 printk("TOYOTA794 ");
 235          if (type & DIBCOM52)
 236                 printk("DIBCOM52 ");
 237          if (type & ZARLINK456)
 238                 printk("ZARLINK456 ");
 239          if (type & CHINA)
 240                 printk("CHINA ");
 241          if (type & F6MHZ)
 242                 printk("F6MHZ ");
 243          if (type & INPUT2)
 244                 printk("INPUT2 ");
 245          if (type & SCODE)
 246                 printk("SCODE ");
 247          if (type & HAS_IF)
 248                 printk("HAS_IF_%d ", int_freq);
 249 }
 250
 251 static  v4l2_std_id parse_audio_std_option(void)
 252 {
 253         if (strcasecmp(audio_std, "A2") == 0)
 254                 return V4L2_STD_A2;
 255         if (strcasecmp(audio_std, "A2/A") == 0)
 256                 return V4L2_STD_A2_A;
 257         if (strcasecmp(audio_std, "A2/B") == 0)
 258                 return V4L2_STD_A2_B;
 259         if (strcasecmp(audio_std, "NICAM") == 0)
 260                 return V4L2_STD_NICAM;
 261         if (strcasecmp(audio_std, "NICAM/A") == 0)
 262                 return V4L2_STD_NICAM_A;
 263         if (strcasecmp(audio_std, "NICAM/B") == 0)
 264                 return V4L2_STD_NICAM_B;
 265
 266         return 0;
 267 }
 268
 269 static int check_device_status(struct xc2028_data *priv)
 270 {
 271         switch (priv->state) {
 272         case XC2028_NO_FIRMWARE:
 273         case XC2028_WAITING_FIRMWARE:
 274                 return -EAGAIN;
 275         case XC2028_ACTIVE:
 276         case XC2028_SLEEP:
 277                 return 0;
 278         case XC2028_NODEV:
 279                 return -ENODEV;
 280         }
 281         return 0;
 282 }
 283
 284 static void free_firmware(struct xc2028_data *priv)
 285 {
 286         int i;
 287         tuner_dbg("%s called\n", __func__);
 288
 289         if (!priv->firm)
 290                 return;
 291
 292         for (i = 0; i < priv->firm_size; i++)
 293                 kfree(priv->firm[i].ptr);
 294
 295         kfree(priv->firm);
 296
 297         priv->firm = NULL;
 298         priv->firm_size = 0;
 299         priv->state = XC2028_NO_FIRMWARE;
 300
 301         memset(&priv->cur_fw, 0, sizeof(priv->cur_fw));
 302 }
 303
 304 static int load_all_firmwares(struct dvb_frontend *fe,
 305                               const struct firmware *fw)
 306 {
 307         struct xc2028_data    *priv = fe->tuner_priv;
 308         const unsigned char   *p, *endp;
 309         int                   rc = 0;
 310         int                   n, n_array;
 311         char                  name[33];
 312
 313         tuner_dbg("%s called\n", __func__);
 314
 315         p = fw->data;
 316         endp = p + fw->size;
 317
 318         if (fw->size < sizeof(name) - 1 + 2 + 2) {
 319                 tuner_err("Error: firmware file %s has invalid size!\n",
 320                           priv->fname);
 321                 goto corrupt;
 322         }
 323
 324         memcpy(name, p, sizeof(name) - 1);
 325         name[sizeof(name) - 1] = 0;
 326         p += sizeof(name) - 1;
 327
 328         priv->firm_version = get_unaligned_le16(p);
 329         p += 2;
 330
 331         n_array = get_unaligned_le16(p);
 332         p += 2;
 333
 334         tuner_info("Loading %d firmware images from %s, type: %s, ver %d.%d\n",
 335                    n_array, priv->fname, name,
 336                    priv->firm_version >> 8, priv->firm_version & 0xff);
 337
 338         priv->firm = kcalloc(n_array, sizeof(*priv->firm), GFP_KERNEL);
 339         if (priv->firm == NULL) {
 340                 tuner_err("Not enough memory to load firmware file.\n");
 341                 rc = -ENOMEM;
 342                 goto err;
 343         }
 344         priv->firm_size = n_array;
 345
 346         n = -1;
 347         while (p < endp) {
 348                 __u32 type, size;
 349                 v4l2_std_id id;
 350                 __u16 int_freq = 0;
 351
 352                 n++;
 353                 if (n >= n_array) {
 354                         tuner_err("More firmware images in file than "
 355                                   "were expected!\n");
 356                         goto corrupt;
 357                 }
 358
 359                 /* Checks if there's enough bytes to read */
 360                 if (endp - p < sizeof(type) + sizeof(id) + sizeof(size))
 361                         goto header;
 362
 363                 type = get_unaligned_le32(p);
 364                 p += sizeof(type);
 365
 366                 id = get_unaligned_le64(p);
 367                 p += sizeof(id);
 368
 369                 if (type & HAS_IF) {
 370                         int_freq = get_unaligned_le16(p);
 371                         p += sizeof(int_freq);
 372                         if (endp - p < sizeof(size))
 373                                 goto header;
 374                 }
 375
 376                 size = get_unaligned_le32(p);
 377                 p += sizeof(size);
 378
 379                 if (!size || size > endp - p) {
 380                         tuner_err("Firmware type ");
 381                         dump_firm_type(type);
 382                         printk("(%x), id %llx is corrupted "
 383                                "(size=%d, expected %d)\n",
 384                                type, (unsigned long long)id,
 385                                (unsigned)(endp - p), size);
 386                         goto corrupt;
 387                 }
 388
 389                 priv->firm[n].ptr = kzalloc(size, GFP_KERNEL);
 390                 if (priv->firm[n].ptr == NULL) {
 391                         tuner_err("Not enough memory to load firmware file.\n");
 392                         rc = -ENOMEM;
 393                         goto err;
 394                 }
 395                 tuner_dbg("Reading firmware type ");
 396                 if (debug) {
 397                         dump_firm_type_and_int_freq(type, int_freq);
 398                         printk("(%x), id %llx, size=%d.\n",
 399                                type, (unsigned long long)id, size);
 400                 }
 401
 402                 memcpy(priv->firm[n].ptr, p, size);
 403                 priv->firm[n].type = type;
 404                 priv->firm[n].id   = id;
 405                 priv->firm[n].size = size;
 406                 priv->firm[n].int_freq = int_freq;
 407
 408                 p += size;
 409         }
 410
 411         if (n + 1 != priv->firm_size) {
 412                 tuner_err("Firmware file is incomplete!\n");
 413                 goto corrupt;
 414         }
 415
 416         goto done;
 417
 418 header:
 419         tuner_err("Firmware header is incomplete!\n");
 420 corrupt:
 421         rc = -EINVAL;
 422         tuner_err("Error: firmware file is corrupted!\n");
 423
 424 err:
 425         tuner_info("Releasing partially loaded firmware file.\n");
 426         free_firmware(priv);
 427
 428 done:
 429         if (rc == 0)
 430                 tuner_dbg("Firmware files loaded.\n");
 431         else
 432                 priv->state = XC2028_NODEV;
 433
 434         return rc;
 435 }
 436
 437 static int seek_firmware(struct dvb_frontend *fe, unsigned int type,
 438                          v4l2_std_id *id)
 439 {
 440         struct xc2028_data *priv = fe->tuner_priv;
 441         int                 i, best_i = -1, best_nr_matches = 0;
 442         unsigned int        type_mask = 0;
 443
 444         tuner_dbg("%s called, want type=", __func__);
 445         if (debug) {
 446                 dump_firm_type(type);
 447                 printk("(%x), id %016llx.\n", type, (unsigned long long)*id);
 448         }
 449
 450         if (!priv->firm) {
 451                 tuner_err("Error! firmware not loaded\n");
 452                 return -EINVAL;
 453         }
 454
 455         if (((type & ~SCODE) == 0) && (*id == 0))
 456                 *id = V4L2_STD_PAL;
 457
 458         if (type & BASE)
 459                 type_mask = BASE_TYPES;
 460         else if (type & SCODE) {
 461                 type &= SCODE_TYPES;
 462                 type_mask = SCODE_TYPES & ~HAS_IF;
 463         } else if (type & DTV_TYPES)
 464                 type_mask = DTV_TYPES;
 465         else if (type & STD_SPECIFIC_TYPES)
 466                 type_mask = STD_SPECIFIC_TYPES;
 467
 468         type &= type_mask;
 469
 470         if (!(type & SCODE))
 471                 type_mask = ~0;
 472
 473         /* Seek for exact match */
 474         for (i = 0; i < priv->firm_size; i++) {
 475                 if ((type == (priv->firm[i].type & type_mask)) &&
 476                     (*id == priv->firm[i].id))
 477                         goto found;
 478         }
 479
 480         /* Seek for generic video standard match */
 481         for (i = 0; i < priv->firm_size; i++) {
 482                 v4l2_std_id match_mask;
 483                 int nr_matches;
 484
 485                 if (type != (priv->firm[i].type & type_mask))
 486                         continue;
 487
 488                 match_mask = *id & priv->firm[i].id;
 489                 if (!match_mask)
 490                         continue;
 491
 492                 if ((*id & match_mask) == *id)
 493                         goto found; /* Supports all the requested standards */
 494
 495                 nr_matches = hweight64(match_mask);
 496                 if (nr_matches > best_nr_matches) {
 497                         best_nr_matches = nr_matches;
 498                         best_i = i;
 499                 }
 500         }
 501
 502         if (best_nr_matches > 0) {
 503                 tuner_dbg("Selecting best matching firmware (%d bits) for "
 504                           "type=", best_nr_matches);
 505                 dump_firm_type(type);
 506                 printk("(%x), id %016llx:\n", type, (unsigned long long)*id);
 507                 i = best_i;
 508                 goto found;
 509         }
 510
 511         /*FIXME: Would make sense to seek for type "hint" match ? */
 512
 513         i = -ENOENT;
 514         goto ret;
 515
 516 found:
 517         *id = priv->firm[i].id;
 518
 519 ret:
 520         tuner_dbg("%s firmware for type=", (i < 0) ? "Can't find" : "Found");
 521         if (debug) {
 522                 dump_firm_type(type);
 523                 printk("(%x), id %016llx.\n", type, (unsigned long long)*id);
 524         }
 525         return i;
 526 }
 527
 528 static inline int do_tuner_callback(struct dvb_frontend *fe, int cmd, int arg)
 529 {
 530         struct xc2028_data *priv = fe->tuner_priv;
 531
 532         /* analog side (tuner-core) uses i2c_adap->algo_data.
 533          * digital side is not guaranteed to have algo_data defined.
 534          *
 535          * digital side will always have fe->dvb defined.
 536          * analog side (tuner-core) doesn't (yet) define fe->dvb.
 537          */
 538
 539         return (!fe->callback) ? -EINVAL :
 540                 fe->callback(((fe->dvb) && (fe->dvb->priv)) ?
 541                                 fe->dvb->priv : priv->i2c_props.adap->algo_data,
 542                              DVB_FRONTEND_COMPONENT_TUNER, cmd, arg);
 543 }
 544
 545 static int load_firmware(struct dvb_frontend *fe, unsigned int type,
 546                          v4l2_std_id *id)
 547 {
 548         struct xc2028_data *priv = fe->tuner_priv;
 549         int                pos, rc;
 550         unsigned char      *p, *endp, buf[priv->ctrl.max_len];
 551
 552         tuner_dbg("%s called\n", __func__);
 553
 554         pos = seek_firmware(fe, type, id);
 555         if (pos < 0)
 556                 return pos;
 557
 558         tuner_info("Loading firmware for type=");
 559         dump_firm_type(priv->firm[pos].type);
 560         printk("(%x), id %016llx.\n", priv->firm[pos].type,
 561                (unsigned long long)*id);
 562
 563         p = priv->firm[pos].ptr;
 564         endp = p + priv->firm[pos].size;
 565
 566         while (p < endp) {
 567                 __u16 size;
 568
 569                 /* Checks if there's enough bytes to read */
 570                 if (p + sizeof(size) > endp) {
 571                         tuner_err("Firmware chunk size is wrong\n");
 572                         return -EINVAL;
 573                 }
 574
 575                 size = le16_to_cpu(*(__u16 *) p);
 576                 p += sizeof(size);
 577
 578                 if (size == 0xffff)
 579                         return 0;
 580
 581                 if (!size) {
 582                         /* Special callback command received */
 583                         rc = do_tuner_callback(fe, XC2028_TUNER_RESET, 0);
 584                         if (rc < 0) {
 585                                 tuner_err("Error at RESET code %d\n",
 586                                            (*p) & 0x7f);
 587                                 return -EINVAL;
 588                         }
 589                         continue;
 590                 }
 591                 if (size >= 0xff00) {
 592                         switch (size) {
 593                         case 0xff00:
 594                                 rc = do_tuner_callback(fe, XC2028_RESET_CLK, 0);
 595                                 if (rc < 0) {
 596                                         tuner_err("Error at RESET code %d\n",
 597                                                   (*p) & 0x7f);
 598                                         return -EINVAL;
 599                                 }
 600                                 break;
 601                         default:
 602                                 tuner_info("Invalid RESET code %d\n",
 603                                            size & 0x7f);
 604                                 return -EINVAL;
 605
 606                         }
 607                         continue;
 608                 }
 609
 610                 /* Checks for a sleep command */
 611                 if (size & 0x8000) {
 612                         msleep(size & 0x7fff);
 613                         continue;
 614                 }
 615
 616                 if ((size + p > endp)) {
 617                         tuner_err("missing bytes: need %d, have %d\n",
 618                                    size, (int)(endp - p));
 619                         return -EINVAL;
 620                 }
 621
 622                 buf[0] = *p;
 623                 p++;
 624                 size--;
 625
 626                 /* Sends message chunks */
 627                 while (size > 0) {
 628                         int len = (size < priv->ctrl.max_len - 1) ?
 629                                    size : priv->ctrl.max_len - 1;
 630
 631                         memcpy(buf + 1, p, len);
 632
 633                         rc = i2c_send(priv, buf, len + 1);
 634                         if (rc < 0) {
 635                                 tuner_err("%d returned from send\n", rc);
 636                                 return -EINVAL;
 637                         }
 638
 639                         p += len;
 640                         size -= len;
 641                 }
 642
 643                 /* silently fail if the frontend doesn't support I2C flush */
 644                 rc = do_tuner_callback(fe, XC2028_I2C_FLUSH, 0);
 645                 if ((rc < 0) && (rc != -EINVAL)) {
 646                         tuner_err("error executing flush: %d\n", rc);
 647                         return rc;
 648                 }
 649         }
 650         return 0;
 651 }
 652
 653 static int load_scode(struct dvb_frontend *fe, unsigned int type,
 654                          v4l2_std_id *id, __u16 int_freq, int scode)
 655 {
 656         struct xc2028_data *priv = fe->tuner_priv;
 657         int                pos, rc;
 658         unsigned char      *p;
 659
 660         tuner_dbg("%s called\n", __func__);
 661
 662         if (!int_freq) {
 663                 pos = seek_firmware(fe, type, id);
 664                 if (pos < 0)
 665                         return pos;
 666         } else {
 667                 for (pos = 0; pos < priv->firm_size; pos++) {
 668                         if ((priv->firm[pos].int_freq == int_freq) &&
 669                             (priv->firm[pos].type & HAS_IF))
 670                                 break;
 671                 }
 672                 if (pos == priv->firm_size)
 673                         return -ENOENT;
 674         }
 675
 676         p = priv->firm[pos].ptr;
 677
 678         if (priv->firm[pos].type & HAS_IF) {
 679                 if (priv->firm[pos].size != 12 * 16 || scode >= 16)
 680                         return -EINVAL;
 681                 p += 12 * scode;
 682         } else {
 683                 /* 16 SCODE entries per file; each SCODE entry is 12 bytes and
 684                  * has a 2-byte size header in the firmware format. */
 685                 if (priv->firm[pos].size != 14 * 16 || scode >= 16 ||
 686                     le16_to_cpu(*(__u16 *)(p + 14 * scode)) != 12)
 687                         return -EINVAL;
 688                 p += 14 * scode + 2;
 689         }
 690
 691         tuner_info("Loading SCODE for type=");
 692         dump_firm_type_and_int_freq(priv->firm[pos].type,
 693                                     priv->firm[pos].int_freq);
 694         printk("(%x), id %016llx.\n", priv->firm[pos].type,
 695                (unsigned long long)*id);
 696
 697         if (priv->firm_version < 0x0202)
 698                 rc = send_seq(priv, {0x20, 0x00, 0x00, 0x00});
 699         else
 700                 rc = send_seq(priv, {0xa0, 0x00, 0x00, 0x00});
 701         if (rc < 0)
 702                 return -EIO;
 703
 704         rc = i2c_send(priv, p, 12);
 705         if (rc < 0)
 706                 return -EIO;
 707
 708         rc = send_seq(priv, {0x00, 0x8c});
 709         if (rc < 0)
 710                 return -EIO;
 711
 712         return 0;
 713 }
 714
 715 static int check_firmware(struct dvb_frontend *fe, unsigned int type,
 716                           v4l2_std_id std, __u16 int_freq)
 717 {
 718         struct xc2028_data         *priv = fe->tuner_priv;
 719         struct firmware_properties new_fw;
 720         int                        rc, retry_count = 0;
 721         u16                        version, hwmodel;
 722         v4l2_std_id                std0;
 723
 724         tuner_dbg("%s called\n", __func__);
 725
 726         rc = check_device_status(priv);
 727         if (rc < 0)
 728                 return rc;
 729
 730         if (priv->ctrl.mts && !(type & FM))
 731                 type |= MTS;
 732
 733 retry:
 734         new_fw.type = type;
 735         new_fw.id = std;
 736         new_fw.std_req = std;
 737         new_fw.scode_table = SCODE | priv->ctrl.scode_table;
 738         new_fw.scode_nr = 0;
 739         new_fw.int_freq = int_freq;
 740
 741         tuner_dbg("checking firmware, user requested type=");
 742         if (debug) {
 743                 dump_firm_type(new_fw.type);
 744                 printk("(%x), id %016llx, ", new_fw.type,
 745                        (unsigned long long)new_fw.std_req);
 746                 if (!int_freq) {
 747                         printk("scode_tbl ");
 748                         dump_firm_type(priv->ctrl.scode_table);
 749                         printk("(%x), ", priv->ctrl.scode_table);
 750                 } else
 751                         printk("int_freq %d, ", new_fw.int_freq);
 752                 printk("scode_nr %d\n", new_fw.scode_nr);
 753         }
 754
 755         /*
 756          * No need to reload base firmware if it matches and if the tuner
 757          * is not at sleep mode
 758          */
 759         if ((priv->state = XC2028_ACTIVE) &&
 760             (((BASE | new_fw.type) & BASE_TYPES) ==
 761             (priv->cur_fw.type & BASE_TYPES))) {
 762                 tuner_dbg("BASE firmware not changed.\n");
 763                 goto skip_base;
 764         }
 765
 766         /* Updating BASE - forget about all currently loaded firmware */
 767         memset(&priv->cur_fw, 0, sizeof(priv->cur_fw));
 768
 769         /* Reset is needed before loading firmware */
 770         rc = do_tuner_callback(fe, XC2028_TUNER_RESET, 0);
 771         if (rc < 0)
 772                 goto fail;
 773
 774         /* BASE firmwares are all std0 */
 775         std0 = 0;
 776         rc = load_firmware(fe, BASE | new_fw.type, &std0);
 777         if (rc < 0) {
 778                 tuner_err("Error %d while loading base firmware\n",
 779                           rc);
 780                 goto fail;
 781         }
 782
 783         /* Load INIT1, if needed */
 784         tuner_dbg("Load init1 firmware, if exists\n");
 785
 786         rc = load_firmware(fe, BASE | INIT1 | new_fw.type, &std0);
 787         if (rc == -ENOENT)
 788                 rc = load_firmware(fe, (BASE | INIT1 | new_fw.type) & ~F8MHZ,
 789                                    &std0);
 790         if (rc < 0 && rc != -ENOENT) {
 791                 tuner_err("Error %d while loading init1 firmware\n",
 792                           rc);
 793                 goto fail;
 794         }
 795
 796 skip_base:
 797         /*
 798          * No need to reload standard specific firmware if base firmware
 799          * was not reloaded and requested video standards have not changed.
 800          */
 801         if (priv->cur_fw.type == (BASE | new_fw.type) &&
 802             priv->cur_fw.std_req == std) {
 803                 tuner_dbg("Std-specific firmware already loaded.\n");
 804                 goto skip_std_specific;
 805         }
 806
 807         /* Reloading std-specific firmware forces a SCODE update */
 808         priv->cur_fw.scode_table = 0;
 809
 810         rc = load_firmware(fe, new_fw.type, &new_fw.id);
 811         if (rc == -ENOENT)
 812                 rc = load_firmware(fe, new_fw.type & ~F8MHZ, &new_fw.id);
 813
 814         if (rc < 0)
 815                 goto fail;
 816
 817 skip_std_specific:
 818         if (priv->cur_fw.scode_table == new_fw.scode_table &&
 819             priv->cur_fw.scode_nr == new_fw.scode_nr) {
 820                 tuner_dbg("SCODE firmware already loaded.\n");
 821                 goto check_device;
 822         }
 823
 824         if (new_fw.type & FM)
 825                 goto check_device;
 826
 827         /* Load SCODE firmware, if exists */
 828         tuner_dbg("Trying to load scode %d\n", new_fw.scode_nr);
 829
 830         rc = load_scode(fe, new_fw.type | new_fw.scode_table, &new_fw.id,
 831                         new_fw.int_freq, new_fw.scode_nr);
 832
 833 check_device:
 834         if (xc2028_get_reg(priv, 0x0004, &version) < 0 ||
 835             xc2028_get_reg(priv, 0x0008, &hwmodel) < 0) {
 836                 tuner_err("Unable to read tuner registers.\n");
 837                 goto fail;
 838         }
 839
 840         tuner_dbg("Device is Xceive %d version %d.%d, "
 841                   "firmware version %d.%d\n",
 842                   hwmodel, (version & 0xf000) >> 12, (version & 0xf00) >> 8,
 843                   (version & 0xf0) >> 4, version & 0xf);
 844
 845
 846         if (priv->ctrl.read_not_reliable)
 847                 goto read_not_reliable;
 848
 849         /* Check firmware version against what we downloaded. */
 850         if (priv->firm_version != ((version & 0xf0) << 4 | (version & 0x0f))) {
 851                 if (!priv->ctrl.read_not_reliable) {
 852                         tuner_err("Incorrect readback of firmware version.\n");
 853                         goto fail;
 854                 } else {
 855                         tuner_err("Returned an incorrect version. However, "
 856                                   "read is not reliable enough. Ignoring it.\n");
 857                         hwmodel = 3028;
 858                 }
 859         }
 860
 861         /* Check that the tuner hardware model remains consistent over time. */
 862         if (priv->hwmodel == 0 && (hwmodel == 2028 || hwmodel == 3028)) {
 863                 priv->hwmodel = hwmodel;
 864                 priv->hwvers  = version & 0xff00;
 865         } else if (priv->hwmodel == 0 || priv->hwmodel != hwmodel ||
 866                    priv->hwvers != (version & 0xff00)) {
 867                 tuner_err("Read invalid device hardware information - tuner "
 868                           "hung?\n");
 869                 goto fail;
 870         }
 871
 872 read_not_reliable:
 873         memcpy(&priv->cur_fw, &new_fw, sizeof(priv->cur_fw));
 874
 875         /*
 876          * By setting BASE in cur_fw.type only after successfully loading all
 877          * firmwares, we can:
 878          * 1. Identify that BASE firmware with type=0 has been loaded;
 879          * 2. Tell whether BASE firmware was just changed the next time through.
 880          */
 881         priv->cur_fw.type |= BASE;
 882         priv->state = XC2028_ACTIVE;
 883
 884         return 0;
 885
 886 fail:
 887         priv->state = XC2028_SLEEP;
 888
 889         memset(&priv->cur_fw, 0, sizeof(priv->cur_fw));
 890         if (retry_count < 8) {
 891                 msleep(50);
 892                 retry_count++;
 893                 tuner_dbg("Retrying firmware load\n");
 894                 goto retry;
 895         }
 896
 897         if (rc == -ENOENT)
 898                 rc = -EINVAL;
 899         return rc;
 900 }
 901
 902 static int xc2028_signal(struct dvb_frontend *fe, u16 *strength)
 903 {
 904         struct xc2028_data *priv = fe->tuner_priv;
 905         u16                 frq_lock, signal = 0;
 906         int                 rc, i;
 907
 908         tuner_dbg("%s called\n", __func__);
 909
 910         rc = check_device_status(priv);
 911         if (rc < 0)
 912                 return rc;
 913
 914         mutex_lock(&priv->lock);
 915
 916         /* Sync Lock Indicator */
 917         for (i = 0; i < 3; i++) {
 918                 rc = xc2028_get_reg(priv, XREG_LOCK, &frq_lock);
 919                 if (rc < 0)
 920                         goto ret;
 921
 922                 if (frq_lock)
 923                         break;
 924                 msleep(6);
 925         }
 926
 927         /* Frequency was not locked */
 928         if (frq_lock == 2)
 929                 goto ret;
 930
 931         /* Get SNR of the video signal */
 932         rc = xc2028_get_reg(priv, XREG_SNR, &signal);
 933         if (rc < 0)
 934                 goto ret;
 935
 936         /* Signal level is 3 bits only */
 937
 938         signal = ((1 << 12) - 1) | ((signal & 0x07) << 12);
 939
 940 ret:
 941         mutex_unlock(&priv->lock);
 942
 943         *strength = signal;
 944
 945         tuner_dbg("signal strength is %d\n", signal);
 946
 947         return rc;
 948 }
 949
 950 #define DIV 15625
 951
 952 static int generic_set_freq(struct dvb_frontend *fe, u32 freq /* in HZ */,
 953                             enum v4l2_tuner_type new_type,
 954                             unsigned int type,
 955                             v4l2_std_id std,
 956                             u16 int_freq)
 957 {
 958         struct xc2028_data *priv = fe->tuner_priv;
 959         int                rc = -EINVAL;
 960         unsigned char      buf[4];
 961         u32                div, offset = 0;
 962
 963         tuner_dbg("%s called\n", __func__);
 964
 965         mutex_lock(&priv->lock);
 966
 967         tuner_dbg("should set frequency %d kHz\n", freq / 1000);
 968
 969         if (check_firmware(fe, type, std, int_freq) < 0)
 970                 goto ret;
 971
 972         /* On some cases xc2028 can disable video output, if
 973          * very weak signals are received. By sending a soft
 974          * reset, this is re-enabled. So, it is better to always
 975          * send a soft reset before changing channels, to be sure
 976          * that xc2028 will be in a safe state.
 977          * Maybe this might also be needed for DTV.
 978          */
 979         switch (new_type) {
 980         case V4L2_TUNER_ANALOG_TV:
 981                 rc = send_seq(priv, {0x00, 0x00});
 982
 983                 /* Analog mode requires offset = 0 */
 984                 break;
 985         case V4L2_TUNER_RADIO:
 986                 /* Radio mode requires offset = 0 */
 987                 break;
 988         case V4L2_TUNER_DIGITAL_TV:
 989                 /*
 990                  * Digital modes require an offset to adjust to the
 991                  * proper frequency. The offset depends on what
 992                  * firmware version is used.
 993                  */
 994
 995                 /*
 996                  * Adjust to the center frequency. This is calculated by the
 997                  * formula: offset = 1.25MHz - BW/2
 998                  * For DTV 7/8, the firmware uses BW = 8000, so it needs a
 999                  * further adjustment to get the frequency center on VHF
1000                  */
1001
1002                 /*
1003                  * The firmware DTV78 used to work fine in UHF band (8 MHz
1004                  * bandwidth) but not at all in VHF band (7 MHz bandwidth).
1005                  * The real problem was connected to the formula used to
1006                  * calculate the center frequency offset in VHF band.
1007                  * In fact, removing the 500KHz adjustment fixed the problem.
1008                  * This is coherent to what was implemented for the DTV7
1009                  * firmware.
1010                  * In the end, now the center frequency is the same for all 3
1011                  * firmwares (DTV7, DTV8, DTV78) and doesn't depend on channel
1012                  * bandwidth.
1013                  */
1014
1015                 if (priv->cur_fw.type & DTV6)
1016                         offset = 1750000;
1017                 else    /* DTV7 or DTV8 or DTV78 */
1018                         offset = 2750000;
1019
1020                 /*
1021                  * xc3028 additional "magic"
1022                  * Depending on the firmware version, it needs some adjustments
1023                  * to properly centralize the frequency. This seems to be
1024                  * needed to compensate the SCODE table adjustments made by
1025                  * newer firmwares
1026                  */
1027
1028                 /*
1029                  * The proper adjustment would be to do it at s-code table.
1030                  * However, this didn't work, as reported by
1031                  * Robert Lowery <rglowery@exemail.com.au>
1032                  */
1033
1034 #if 0
1035                 /*
1036                  * Still need tests for XC3028L (firmware 3.2 or upper)
1037                  * So, for now, let's just comment the per-firmware
1038                  * version of this change. Reports with xc3028l working
1039                  * with and without the lines bellow are welcome
1040                  */
1041
1042                 if (priv->firm_version < 0x0302) {
1043                         if (priv->cur_fw.type & DTV7)
1044                                 offset += 500000;
1045                 } else {
1046                         if (priv->cur_fw.type & DTV7)
1047                                 offset -= 300000;
1048                         else if (type != ATSC) /* DVB @6MHz, DTV 8 and DTV 7/8 */
1049                                 offset += 200000;
1050                 }
1051 #endif
1052         }
1053
1054         div = (freq - offset + DIV / 2) / DIV;
1055
1056         /* CMD= Set frequency */
1057         if (priv->firm_version < 0x0202)
1058                 rc = send_seq(priv, {0x00, XREG_RF_FREQ, 0x00, 0x00});
1059         else
1060                 rc = send_seq(priv, {0x80, XREG_RF_FREQ, 0x00, 0x00});
1061         if (rc < 0)
1062                 goto ret;
1063
1064         /* Return code shouldn't be checked.
1065            The reset CLK is needed only with tm6000.
1066            Driver should work fine even if this fails.
1067          */
1068         if (priv->ctrl.msleep)
1069                 msleep(priv->ctrl.msleep);
1070         do_tuner_callback(fe, XC2028_RESET_CLK, 1);
1071
1072         msleep(10);
1073
1074         buf[0] = 0xff & (div >> 24);
1075         buf[1] = 0xff & (div >> 16);
1076         buf[2] = 0xff & (div >> 8);
1077         buf[3] = 0xff & (div);
1078
1079         rc = i2c_send(priv, buf, sizeof(buf));
1080         if (rc < 0)
1081                 goto ret;
1082         msleep(100);
1083
1084         priv->frequency = freq;
1085
1086         tuner_dbg("divisor= %02x %02x %02x %02x (freq=%d.%03d)\n",
1087                buf[0], buf[1], buf[2], buf[3],
1088                freq / 1000000, (freq % 1000000) / 1000);
1089
1090         rc = 0;
1091
1092 ret:
1093         mutex_unlock(&priv->lock);
1094
1095         return rc;
1096 }
1097
1098 static int xc2028_set_analog_freq(struct dvb_frontend *fe,
1099                               struct analog_parameters *p)
1100 {
1101         struct xc2028_data *priv = fe->tuner_priv;
1102         unsigned int       type=0;
1103
1104         tuner_dbg("%s called\n", __func__);
1105
1106         if (p->mode == V4L2_TUNER_RADIO) {
1107                 type |= FM;
1108                 if (priv->ctrl.input1)
1109                         type |= INPUT1;
1110                 return generic_set_freq(fe, (625l * p->frequency) / 10,
1111                                 V4L2_TUNER_RADIO, type, 0, 0);
1112         }
1113
1114         /* if std is not defined, choose one */
1115         if (!p->std)
1116                 p->std = V4L2_STD_MN;
1117
1118         /* PAL/M, PAL/N, PAL/Nc and NTSC variants should use 6MHz firmware */
1119         if (!(p->std & V4L2_STD_MN))
1120                 type |= F8MHZ;
1121
1122         /* Add audio hack to std mask */
1123         p->std |= parse_audio_std_option();
1124
1125         return generic_set_freq(fe, 62500l * p->frequency,
1126                                 V4L2_TUNER_ANALOG_TV, type, p->std, 0);
1127 }
1128
1129 static int xc2028_set_params(struct dvb_frontend *fe)
1130 {
1131         struct dtv_frontend_properties *c = &fe->dtv_property_cache;
1132         u32 delsys = c->delivery_system;
1133         u32 bw = c->bandwidth_hz;
1134         struct xc2028_data *priv = fe->tuner_priv;
1135         int rc;
1136         unsigned int       type = 0;
1137         u16                demod = 0;
1138
1139         tuner_dbg("%s called\n", __func__);
1140
1141         rc = check_device_status(priv);
1142         if (rc < 0)
1143                 return rc;
1144
1145         switch (delsys) {
1146         case SYS_DVBT:
1147         case SYS_DVBT2:
1148                 /*
1149                  * The only countries with 6MHz seem to be Taiwan/Uruguay.
1150                  * Both seem to require QAM firmware for OFDM decoding
1151                  * Tested in Taiwan by Terry Wu <terrywu2009@gmail.com>
1152                  */
1153                 if (bw <= 6000000)
1154                         type |= QAM;
1155
1156                 switch (priv->ctrl.type) {
1157                 case XC2028_D2633:
1158                         type |= D2633;
1159                         break;
1160                 case XC2028_D2620:
1161                         type |= D2620;
1162                         break;
1163                 case XC2028_AUTO:
1164                 default:
1165                         /* Zarlink seems to need D2633 */
1166                         if (priv->ctrl.demod == XC3028_FE_ZARLINK456)
1167                                 type |= D2633;
1168                         else
1169                                 type |= D2620;
1170                 }
1171                 break;
1172         case SYS_ATSC:
1173                 /* The only ATSC firmware (at least on v2.7) is D2633 */
1174                 type |= ATSC | D2633;
1175                 break;
1176         /* DVB-S and pure QAM (FE_QAM) are not supported */
1177         default:
1178                 return -EINVAL;
1179         }
1180
1181         if (bw <= 6000000) {
1182                 type |= DTV6;
1183                 priv->ctrl.vhfbw7 = 0;
1184                 priv->ctrl.uhfbw8 = 0;
1185         } else if (bw <= 7000000) {
1186                 if (c->frequency < 470000000)
1187                         priv->ctrl.vhfbw7 = 1;
1188                 else
1189                         priv->ctrl.uhfbw8 = 0;
1190                 type |= (priv->ctrl.vhfbw7 && priv->ctrl.uhfbw8) ? DTV78 : DTV7;
1191                 type |= F8MHZ;
1192         } else {
1193                 if (c->frequency < 470000000)
1194                         priv->ctrl.vhfbw7 = 0;
1195                 else
1196                         priv->ctrl.uhfbw8 = 1;
1197                 type |= (priv->ctrl.vhfbw7 && priv->ctrl.uhfbw8) ? DTV78 : DTV8;
1198                 type |= F8MHZ;
1199         }
1200
1201         /* All S-code tables need a 200kHz shift */
1202         if (priv->ctrl.demod) {
1203                 demod = priv->ctrl.demod;
1204
1205                 /*
1206                  * Newer firmwares require a 200 kHz offset only for ATSC
1207                  */
1208                 if (type == ATSC || priv->firm_version < 0x0302)
1209                         demod += 200;
1210                 /*
1211                  * The DTV7 S-code table needs a 700 kHz shift.
1212                  *
1213                  * DTV7 is only used in Australia.  Germany or Italy may also
1214                  * use this firmware after initialization, but a tune to a UHF
1215                  * channel should then cause DTV78 to be used.
1216                  *
1217                  * Unfortunately, on real-field tests, the s-code offset
1218                  * didn't work as expected, as reported by
1219                  * Robert Lowery <rglowery@exemail.com.au>
1220                  */
1221         }
1222
1223         return generic_set_freq(fe, c->frequency,
1224                                 V4L2_TUNER_DIGITAL_TV, type, 0, demod);
1225 }
1226
1227 static int xc2028_sleep(struct dvb_frontend *fe)
1228 {
1229         struct xc2028_data *priv = fe->tuner_priv;
1230         int rc;
1231
1232         rc = check_device_status(priv);
1233         if (rc < 0)
1234                 return rc;
1235
1236         /* Avoid firmware reload on slow devices or if PM disabled */
1237         if (no_poweroff || priv->ctrl.disable_power_mgmt)
1238                 return 0;
1239
1240         tuner_dbg("Putting xc2028/3028 into poweroff mode.\n");
1241         if (debug > 1) {
1242                 tuner_dbg("Printing sleep stack trace:\n");
1243                 dump_stack();
1244         }
1245
1246         mutex_lock(&priv->lock);
1247
1248         if (priv->firm_version < 0x0202)
1249                 rc = send_seq(priv, {0x00, XREG_POWER_DOWN, 0x00, 0x00});
1250         else
1251                 rc = send_seq(priv, {0x80, XREG_POWER_DOWN, 0x00, 0x00});
1252
1253         priv->state = XC2028_SLEEP;
1254
1255         mutex_unlock(&priv->lock);
1256
1257         return rc;
1258 }
1259
1260 static int xc2028_dvb_release(struct dvb_frontend *fe)
1261 {
1262         struct xc2028_data *priv = fe->tuner_priv;
1263
1264         tuner_dbg("%s called\n", __func__);
1265
1266         mutex_lock(&xc2028_list_mutex);
1267
1268         /* only perform final cleanup if this is the last instance */
1269         if (hybrid_tuner_report_instance_count(priv) == 1) {
1270                 free_firmware(priv);
1271                 kfree(priv->ctrl.fname);
1272                 priv->ctrl.fname = NULL;
1273         }
1274
1275         if (priv)
1276                 hybrid_tuner_release_state(priv);
1277
1278         mutex_unlock(&xc2028_list_mutex);
1279
1280         fe->tuner_priv = NULL;
1281
1282         return 0;
1283 }
1284
1285 static int xc2028_get_frequency(struct dvb_frontend *fe, u32 *frequency)
1286 {
1287         struct xc2028_data *priv = fe->tuner_priv;
1288         int rc;
1289
1290         tuner_dbg("%s called\n", __func__);
1291
1292         rc = check_device_status(priv);
1293         if (rc < 0)
1294                 return rc;
1295
1296         *frequency = priv->frequency;
1297
1298         return 0;
1299 }
1300
1301 static void load_firmware_cb(const struct firmware *fw,
1302                              void *context)
1303 {
1304         struct dvb_frontend *fe = context;
1305         struct xc2028_data *priv = fe->tuner_priv;
1306         int rc;
1307
1308         tuner_dbg("request_firmware_nowait(): %s\n", fw ? "OK" : "error");
1309         if (!fw) {
1310                 tuner_err("Could not load firmware %s.\n", priv->fname);
1311                 priv->state = XC2028_NODEV;
1312                 return;
1313         }
1314
1315         rc = load_all_firmwares(fe, fw);
1316
1317         release_firmware(fw);
1318
1319         if (rc < 0)
1320                 return;
1321         priv->state = XC2028_SLEEP;
1322 }
1323
1324 static int xc2028_set_config(struct dvb_frontend *fe, void *priv_cfg)
1325 {
1326         struct xc2028_data *priv = fe->tuner_priv;
1327         struct xc2028_ctrl *p    = priv_cfg;
1328         int                 rc   = 0;
1329
1330         tuner_dbg("%s called\n", __func__);
1331
1332         mutex_lock(&priv->lock);
1333
1334         /*
1335          * Copy the config data.
1336          * For the firmware name, keep a local copy of the string,
1337          * in order to avoid troubles during device release.
1338          */
1339         if (priv->ctrl.fname)
1340                 kfree(priv->ctrl.fname);
1341         memcpy(&priv->ctrl, p, sizeof(priv->ctrl));
1342         if (p->fname) {
1343                 priv->ctrl.fname = kstrdup(p->fname, GFP_KERNEL);
1344                 if (priv->ctrl.fname == NULL)
1345                         rc = -ENOMEM;
1346         }
1347
1348         /*
1349          * If firmware name changed, frees firmware. As free_firmware will
1350          * reset the status to NO_FIRMWARE, this forces a new request_firmware
1351          */
1352         if (!firmware_name[0] && p->fname &&
1353             priv->fname && strcmp(p->fname, priv->fname))
1354                 free_firmware(priv);
1355
1356         if (priv->ctrl.max_len < 9)
1357                 priv->ctrl.max_len = 13;
1358
1359         if (priv->state == XC2028_NO_FIRMWARE) {
1360                 if (!firmware_name[0])
1361                         priv->fname = priv->ctrl.fname;
1362                 else
1363                         priv->fname = firmware_name;
1364
1365                 rc = request_firmware_nowait(THIS_MODULE, 1,
1366                                              priv->fname,
1367                                              priv->i2c_props.adap->dev.parent,
1368                                              GFP_KERNEL,
1369                                              fe, load_firmware_cb);
1370                 if (rc < 0) {
1371                         tuner_err("Failed to request firmware %s\n",
1372                                   priv->fname);
1373                         priv->state = XC2028_NODEV;
1374                 }
1375                 priv->state = XC2028_WAITING_FIRMWARE;
1376         }
1377         mutex_unlock(&priv->lock);
1378
1379         return rc;
1380 }
1381
1382 static const struct dvb_tuner_ops xc2028_dvb_tuner_ops = {
1383         .info = {
1384                  .name = "Xceive XC3028",
1385                  .frequency_min = 42000000,
1386                  .frequency_max = 864000000,
1387                  .frequency_step = 50000,
1388                  },
1389
1390         .set_config        = xc2028_set_config,
1391         .set_analog_params = xc2028_set_analog_freq,
1392         .release           = xc2028_dvb_release,
1393         .get_frequency     = xc2028_get_frequency,
1394         .get_rf_strength   = xc2028_signal,
1395         .set_params        = xc2028_set_params,
1396         .sleep             = xc2028_sleep,
1397 };
1398
1399 struct dvb_frontend *xc2028_attach(struct dvb_frontend *fe,
1400                                    struct xc2028_config *cfg)
1401 {
1402         struct xc2028_data *priv;
1403         int instance;
1404
1405         if (debug)
1406                 printk(KERN_DEBUG "xc2028: Xcv2028/3028 init called!\n");
1407
1408         if (NULL == cfg)
1409                 return NULL;
1410
1411         if (!fe) {
1412                 printk(KERN_ERR "xc2028: No frontend!\n");
1413                 return NULL;
1414         }
1415
1416         mutex_lock(&xc2028_list_mutex);
1417
1418         instance = hybrid_tuner_request_state(struct xc2028_data, priv,
1419                                               hybrid_tuner_instance_list,
1420                                               cfg->i2c_adap, cfg->i2c_addr,
1421                                               "xc2028");
1422         switch (instance) {
1423         case 0:
1424                 /* memory allocation failure */
1425                 goto fail;
1426                 break;
1427         case 1:
1428                 /* new tuner instance */
1429                 priv->ctrl.max_len = 13;
1430
1431                 mutex_init(&priv->lock);
1432
1433                 fe->tuner_priv = priv;
1434                 break;
1435         case 2:
1436                 /* existing tuner instance */
1437                 fe->tuner_priv = priv;
1438                 break;
1439         }
1440
1441         memcpy(&fe->ops.tuner_ops, &xc2028_dvb_tuner_ops,
1442                sizeof(xc2028_dvb_tuner_ops));
1443
1444         tuner_info("type set to %s\n", "XCeive xc2028/xc3028 tuner");
1445
1446         if (cfg->ctrl)
1447                 xc2028_set_config(fe, cfg->ctrl);
1448
1449         mutex_unlock(&xc2028_list_mutex);
1450
1451         return fe;
1452 fail:
1453         mutex_unlock(&xc2028_list_mutex);
1454
1455         xc2028_dvb_release(fe);
1456         return NULL;
1457 }
1458
1459 EXPORT_SYMBOL(xc2028_attach);
1460
1461 MODULE_DESCRIPTION("Xceive xc2028/xc3028 tuner driver");
1462 MODULE_AUTHOR("Michel Ludwig <michel.ludwig@gmail.com>");
1463 MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>");
1464 MODULE_LICENSE("GPL");