drivers/md/raid10.c

   1 /*
   2  * raid10.c : Multiple Devices driver for Linux
   3  *
   4  * Copyright (C) 2000-2004 Neil Brown
   5  *
   6  * RAID-10 support for md.
   7  *
   8  * Base on code in raid1.c.  See raid1.c for futher copyright information.
   9  *
  10  *
  11  * This program is free software; you can redistribute it and/or modify
  12  * it under the terms of the GNU General Public License as published by
  13  * the Free Software Foundation; either version 2, or (at your option)
  14  * any later version.
  15  *
  16  * You should have received a copy of the GNU General Public License
  17  * (for example /usr/src/linux/COPYING); if not, write to the Free
  18  * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  19  */
  20
  21 #include "dm-bio-list.h"
  22 #include <linux/raid/raid10.h>
  23 #include <linux/raid/bitmap.h>
  24
  25 /*
  26  * RAID10 provides a combination of RAID0 and RAID1 functionality.
  27  * The layout of data is defined by
  28  *    chunk_size
  29  *    raid_disks
  30  *    near_copies (stored in low byte of layout)
  31  *    far_copies (stored in second byte of layout)
  32  *
  33  * The data to be stored is divided into chunks using chunksize.
  34  * Each device is divided into far_copies sections.
  35  * In each section, chunks are laid out in a style similar to raid0, but
  36  * near_copies copies of each chunk is stored (each on a different drive).
  37  * The starting device for each section is offset near_copies from the starting
  38  * device of the previous section.
  39  * Thus there are (near_copies*far_copies) of each chunk, and each is on a different
  40  * drive.
  41  * near_copies and far_copies must be at least one, and their product is at most
  42  * raid_disks.
  43  */
  44
  45 /*
  46  * Number of guaranteed r10bios in case of extreme VM load:
  47  */
  48 #define NR_RAID10_BIOS 256
  49
  50 static void unplug_slaves(mddev_t *mddev);
  51
  52 static void allow_barrier(conf_t *conf);
  53 static void lower_barrier(conf_t *conf);
  54
  55 static void * r10bio_pool_alloc(gfp_t gfp_flags, void *data)
  56 {
  57         conf_t *conf = data;
  58         r10bio_t *r10_bio;
  59         int size = offsetof(struct r10bio_s, devs[conf->copies]);
  60
  61         /* allocate a r10bio with room for raid_disks entries in the bios array */
  62         r10_bio = kmalloc(size, gfp_flags);
  63         if (r10_bio)
  64                 memset(r10_bio, 0, size);
  65         else
  66                 unplug_slaves(conf->mddev);
  67
  68         return r10_bio;
  69 }
  70
  71 static void r10bio_pool_free(void *r10_bio, void *data)
  72 {
  73         kfree(r10_bio);
  74 }
  75
  76 #define RESYNC_BLOCK_SIZE (64*1024)
  77 //#define RESYNC_BLOCK_SIZE PAGE_SIZE
  78 #define RESYNC_SECTORS (RESYNC_BLOCK_SIZE >> 9)
  79 #define RESYNC_PAGES ((RESYNC_BLOCK_SIZE + PAGE_SIZE-1) / PAGE_SIZE)
  80 #define RESYNC_WINDOW (2048*1024)
  81
  82 /*
  83  * When performing a resync, we need to read and compare, so
  84  * we need as many pages are there are copies.
  85  * When performing a recovery, we need 2 bios, one for read,
  86  * one for write (we recover only one drive per r10buf)
  87  *
  88  */
  89 static void * r10buf_pool_alloc(gfp_t gfp_flags, void *data)
  90 {
  91         conf_t *conf = data;
  92         struct page *page;
  93         r10bio_t *r10_bio;
  94         struct bio *bio;
  95         int i, j;
  96         int nalloc;
  97
  98         r10_bio = r10bio_pool_alloc(gfp_flags, conf);
  99         if (!r10_bio) {
 100                 unplug_slaves(conf->mddev);
 101                 return NULL;
 102         }
 103
 104         if (test_bit(MD_RECOVERY_SYNC, &conf->mddev->recovery))
 105                 nalloc = conf->copies; /* resync */
 106         else
 107                 nalloc = 2; /* recovery */
 108
 109         /*
 110          * Allocate bios.
 111          */
 112         for (j = nalloc ; j-- ; ) {
 113                 bio = bio_alloc(gfp_flags, RESYNC_PAGES);
 114                 if (!bio)
 115                         goto out_free_bio;
 116                 r10_bio->devs[j].bio = bio;
 117         }
 118         /*
 119          * Allocate RESYNC_PAGES data pages and attach them
 120          * where needed.
 121          */
 122         for (j = 0 ; j < nalloc; j++) {
 123                 bio = r10_bio->devs[j].bio;
 124                 for (i = 0; i < RESYNC_PAGES; i++) {
 125                         page = alloc_page(gfp_flags);
 126                         if (unlikely(!page))
 127                                 goto out_free_pages;
 128
 129                         bio->bi_io_vec[i].bv_page = page;
 130                 }
 131         }
 132
 133         return r10_bio;
 134
 135 out_free_pages:
 136         for ( ; i > 0 ; i--)
 137                 __free_page(bio->bi_io_vec[i-1].bv_page);
 138         while (j--)
 139                 for (i = 0; i < RESYNC_PAGES ; i++)
 140                         __free_page(r10_bio->devs[j].bio->bi_io_vec[i].bv_page);
 141         j = -1;
 142 out_free_bio:
 143         while ( ++j < nalloc )
 144                 bio_put(r10_bio->devs[j].bio);
 145         r10bio_pool_free(r10_bio, conf);
 146         return NULL;
 147 }
 148
 149 static void r10buf_pool_free(void *__r10_bio, void *data)
 150 {
 151         int i;
 152         conf_t *conf = data;
 153         r10bio_t *r10bio = __r10_bio;
 154         int j;
 155
 156         for (j=0; j < conf->copies; j++) {
 157                 struct bio *bio = r10bio->devs[j].bio;
 158                 if (bio) {
 159                         for (i = 0; i < RESYNC_PAGES; i++) {
 160                                 __free_page(bio->bi_io_vec[i].bv_page);
 161                                 bio->bi_io_vec[i].bv_page = NULL;
 162                         }
 163                         bio_put(bio);
 164                 }
 165         }
 166         r10bio_pool_free(r10bio, conf);
 167 }
 168
 169 static void put_all_bios(conf_t *conf, r10bio_t *r10_bio)
 170 {
 171         int i;
 172
 173         for (i = 0; i < conf->copies; i++) {
 174                 struct bio **bio = & r10_bio->devs[i].bio;
 175                 if (*bio)
 176                         bio_put(*bio);
 177                 *bio = NULL;
 178         }
 179 }
 180
 181 static inline void free_r10bio(r10bio_t *r10_bio)
 182 {
 183         conf_t *conf = mddev_to_conf(r10_bio->mddev);
 184
 185         /*
 186          * Wake up any possible resync thread that waits for the device
 187          * to go idle.
 188          */
 189         allow_barrier(conf);
 190
 191         put_all_bios(conf, r10_bio);
 192         mempool_free(r10_bio, conf->r10bio_pool);
 193 }
 194
 195 static inline void put_buf(r10bio_t *r10_bio)
 196 {
 197         conf_t *conf = mddev_to_conf(r10_bio->mddev);
 198
 199         mempool_free(r10_bio, conf->r10buf_pool);
 200
 201         lower_barrier(conf);
 202 }
 203
 204 static void reschedule_retry(r10bio_t *r10_bio)
 205 {
 206         unsigned long flags;
 207         mddev_t *mddev = r10_bio->mddev;
 208         conf_t *conf = mddev_to_conf(mddev);
 209
 210         spin_lock_irqsave(&conf->device_lock, flags);
 211         list_add(&r10_bio->retry_list, &conf->retry_list);
 212         spin_unlock_irqrestore(&conf->device_lock, flags);
 213
 214         md_wakeup_thread(mddev->thread);
 215 }
 216
 217 /*
 218  * raid_end_bio_io() is called when we have finished servicing a mirrored
 219  * operation and are ready to return a success/failure code to the buffer
 220  * cache layer.
 221  */
 222 static void raid_end_bio_io(r10bio_t *r10_bio)
 223 {
 224         struct bio *bio = r10_bio->master_bio;
 225
 226         bio_endio(bio, bio->bi_size,
 227                 test_bit(R10BIO_Uptodate, &r10_bio->state) ? 0 : -EIO);
 228         free_r10bio(r10_bio);
 229 }
 230
 231 /*
 232  * Update disk head position estimator based on IRQ completion info.
 233  */
 234 static inline void update_head_pos(int slot, r10bio_t *r10_bio)
 235 {
 236         conf_t *conf = mddev_to_conf(r10_bio->mddev);
 237
 238         conf->mirrors[r10_bio->devs[slot].devnum].head_position =
 239                 r10_bio->devs[slot].addr + (r10_bio->sectors);
 240 }
 241
 242 static int raid10_end_read_request(struct bio *bio, unsigned int bytes_done, int error)
 243 {
 244         int uptodate = test_bit(BIO_UPTODATE, &bio->bi_flags);
 245         r10bio_t * r10_bio = (r10bio_t *)(bio->bi_private);
 246         int slot, dev;
 247         conf_t *conf = mddev_to_conf(r10_bio->mddev);
 248
 249         if (bio->bi_size)
 250                 return 1;
 251
 252         slot = r10_bio->read_slot;
 253         dev = r10_bio->devs[slot].devnum;
 254         /*
 255          * this branch is our 'one mirror IO has finished' event handler:
 256          */
 257         if (!uptodate)
 258                 md_error(r10_bio->mddev, conf->mirrors[dev].rdev);
 259         else
 260                 /*
 261                  * Set R10BIO_Uptodate in our master bio, so that
 262                  * we will return a good error code to the higher
 263                  * levels even if IO on some other mirrored buffer fails.
 264                  *
 265                  * The 'master' represents the composite IO operation to
 266                  * user-side. So if something waits for IO, then it will
 267                  * wait for the 'master' bio.
 268                  */
 269                 set_bit(R10BIO_Uptodate, &r10_bio->state);
 270
 271         update_head_pos(slot, r10_bio);
 272
 273         /*
 274          * we have only one bio on the read side
 275          */
 276         if (uptodate)
 277                 raid_end_bio_io(r10_bio);
 278         else {
 279                 /*
 280                  * oops, read error:
 281                  */
 282                 char b[BDEVNAME_SIZE];
 283                 if (printk_ratelimit())
 284                         printk(KERN_ERR "raid10: %s: rescheduling sector %llu\n",
 285                                bdevname(conf->mirrors[dev].rdev->bdev,b), (unsigned long long)r10_bio->sector);
 286                 reschedule_retry(r10_bio);
 287         }
 288
 289         rdev_dec_pending(conf->mirrors[dev].rdev, conf->mddev);
 290         return 0;
 291 }
 292
 293 static int raid10_end_write_request(struct bio *bio, unsigned int bytes_done, int error)
 294 {
 295         int uptodate = test_bit(BIO_UPTODATE, &bio->bi_flags);
 296         r10bio_t * r10_bio = (r10bio_t *)(bio->bi_private);
 297         int slot, dev;
 298         conf_t *conf = mddev_to_conf(r10_bio->mddev);
 299
 300         if (bio->bi_size)
 301                 return 1;
 302
 303         for (slot = 0; slot < conf->copies; slot++)
 304                 if (r10_bio->devs[slot].bio == bio)
 305                         break;
 306         dev = r10_bio->devs[slot].devnum;
 307
 308         /*
 309          * this branch is our 'one mirror IO has finished' event handler:
 310          */
 311         if (!uptodate) {
 312                 md_error(r10_bio->mddev, conf->mirrors[dev].rdev);
 313                 /* an I/O failed, we can't clear the bitmap */
 314                 set_bit(R10BIO_Degraded, &r10_bio->state);
 315         } else
 316                 /*
 317                  * Set R10BIO_Uptodate in our master bio, so that
 318                  * we will return a good error code for to the higher
 319                  * levels even if IO on some other mirrored buffer fails.
 320                  *
 321                  * The 'master' represents the composite IO operation to
 322                  * user-side. So if something waits for IO, then it will
 323                  * wait for the 'master' bio.
 324                  */
 325                 set_bit(R10BIO_Uptodate, &r10_bio->state);
 326
 327         update_head_pos(slot, r10_bio);
 328
 329         /*
 330          *
 331          * Let's see if all mirrored write operations have finished
 332          * already.
 333          */
 334         if (atomic_dec_and_test(&r10_bio->remaining)) {
 335                 /* clear the bitmap if all writes complete successfully */
 336                 bitmap_endwrite(r10_bio->mddev->bitmap, r10_bio->sector,
 337                                 r10_bio->sectors,
 338                                 !test_bit(R10BIO_Degraded, &r10_bio->state),
 339                                 0);
 340                 md_write_end(r10_bio->mddev);
 341                 raid_end_bio_io(r10_bio);
 342         }
 343
 344         rdev_dec_pending(conf->mirrors[dev].rdev, conf->mddev);
 345         return 0;
 346 }
 347
 348
 349 /*
 350  * RAID10 layout manager
 351  * Aswell as the chunksize and raid_disks count, there are two
 352  * parameters: near_copies and far_copies.
 353  * near_copies * far_copies must be <= raid_disks.
 354  * Normally one of these will be 1.
 355  * If both are 1, we get raid0.
 356  * If near_copies == raid_disks, we get raid1.
 357  *
 358  * Chunks are layed out in raid0 style with near_copies copies of the
 359  * first chunk, followed by near_copies copies of the next chunk and
 360  * so on.
 361  * If far_copies > 1, then after 1/far_copies of the array has been assigned
 362  * as described above, we start again with a device offset of near_copies.
 363  * So we effectively have another copy of the whole array further down all
 364  * the drives, but with blocks on different drives.
 365  * With this layout, and block is never stored twice on the one device.
 366  *
 367  * raid10_find_phys finds the sector offset of a given virtual sector
 368  * on each device that it is on. If a block isn't on a device,
 369  * that entry in the array is set to MaxSector.
 370  *
 371  * raid10_find_virt does the reverse mapping, from a device and a
 372  * sector offset to a virtual address
 373  */
 374
 375 static void raid10_find_phys(conf_t *conf, r10bio_t *r10bio)
 376 {
 377         int n,f;
 378         sector_t sector;
 379         sector_t chunk;
 380         sector_t stripe;
 381         int dev;
 382
 383         int slot = 0;
 384
 385         /* now calculate first sector/dev */
 386         chunk = r10bio->sector >> conf->chunk_shift;
 387         sector = r10bio->sector & conf->chunk_mask;
 388
 389         chunk *= conf->near_copies;
 390         stripe = chunk;
 391         dev = sector_div(stripe, conf->raid_disks);
 392
 393         sector += stripe << conf->chunk_shift;
 394
 395         /* and calculate all the others */
 396         for (n=0; n < conf->near_copies; n++) {
 397                 int d = dev;
 398                 sector_t s = sector;
 399                 r10bio->devs[slot].addr = sector;
 400                 r10bio->devs[slot].devnum = d;
 401                 slot++;
 402
 403                 for (f = 1; f < conf->far_copies; f++) {
 404                         d += conf->near_copies;
 405                         if (d >= conf->raid_disks)
 406                                 d -= conf->raid_disks;
 407                         s += conf->stride;
 408                         r10bio->devs[slot].devnum = d;
 409                         r10bio->devs[slot].addr = s;
 410                         slot++;
 411                 }
 412                 dev++;
 413                 if (dev >= conf->raid_disks) {
 414                         dev = 0;
 415                         sector += (conf->chunk_mask + 1);
 416                 }
 417         }
 418         BUG_ON(slot != conf->copies);
 419 }
 420
 421 static sector_t raid10_find_virt(conf_t *conf, sector_t sector, int dev)
 422 {
 423         sector_t offset, chunk, vchunk;
 424
 425         while (sector > conf->stride) {
 426                 sector -= conf->stride;
 427                 if (dev < conf->near_copies)
 428                         dev += conf->raid_disks - conf->near_copies;
 429                 else
 430                         dev -= conf->near_copies;
 431         }
 432
 433         offset = sector & conf->chunk_mask;
 434         chunk = sector >> conf->chunk_shift;
 435         vchunk = chunk * conf->raid_disks + dev;
 436         sector_div(vchunk, conf->near_copies);
 437         return (vchunk << conf->chunk_shift) + offset;
 438 }
 439
 440 /**
 441  *      raid10_mergeable_bvec -- tell bio layer if a two requests can be merged
 442  *      @q: request queue
 443  *      @bio: the buffer head that's been built up so far
 444  *      @biovec: the request that could be merged to it.
 445  *
 446  *      Return amount of bytes we can accept at this offset
 447  *      If near_copies == raid_disk, there are no striping issues,
 448  *      but in that case, the function isn't called at all.
 449  */
 450 static int raid10_mergeable_bvec(request_queue_t *q, struct bio *bio,
 451                                 struct bio_vec *bio_vec)
 452 {
 453         mddev_t *mddev = q->queuedata;
 454         sector_t sector = bio->bi_sector + get_start_sect(bio->bi_bdev);
 455         int max;
 456         unsigned int chunk_sectors = mddev->chunk_size >> 9;
 457         unsigned int bio_sectors = bio->bi_size >> 9;
 458
 459         max =  (chunk_sectors - ((sector & (chunk_sectors - 1)) + bio_sectors)) << 9;
 460         if (max < 0) max = 0; /* bio_add cannot handle a negative return */
 461         if (max <= bio_vec->bv_len && bio_sectors == 0)
 462                 return bio_vec->bv_len;
 463         else
 464                 return max;
 465 }
 466
 467 /*
 468  * This routine returns the disk from which the requested read should
 469  * be done. There is a per-array 'next expected sequential IO' sector
 470  * number - if this matches on the next IO then we use the last disk.
 471  * There is also a per-disk 'last know head position' sector that is
 472  * maintained from IRQ contexts, both the normal and the resync IO
 473  * completion handlers update this position correctly. If there is no
 474  * perfect sequential match then we pick the disk whose head is closest.
 475  *
 476  * If there are 2 mirrors in the same 2 devices, performance degrades
 477  * because position is mirror, not device based.
 478  *
 479  * The rdev for the device selected will have nr_pending incremented.
 480  */
 481
 482 /*
 483  * FIXME: possibly should rethink readbalancing and do it differently
 484  * depending on near_copies / far_copies geometry.
 485  */
 486 static int read_balance(conf_t *conf, r10bio_t *r10_bio)
 487 {
 488         const unsigned long this_sector = r10_bio->sector;
 489         int disk, slot, nslot;
 490         const int sectors = r10_bio->sectors;
 491         sector_t new_distance, current_distance;
 492         mdk_rdev_t *rdev;
 493
 494         raid10_find_phys(conf, r10_bio);
 495         rcu_read_lock();
 496         /*
 497          * Check if we can balance. We can balance on the whole
 498          * device if no resync is going on (recovery is ok), or below
 499          * the resync window. We take the first readable disk when
 500          * above the resync window.
 501          */
 502         if (conf->mddev->recovery_cp < MaxSector
 503             && (this_sector + sectors >= conf->next_resync)) {
 504                 /* make sure that disk is operational */
 505                 slot = 0;
 506                 disk = r10_bio->devs[slot].devnum;
 507
 508                 while ((rdev = rcu_dereference(conf->mirrors[disk].rdev)) == NULL ||
 509                        !test_bit(In_sync, &rdev->flags)) {
 510                         slot++;
 511                         if (slot == conf->copies) {
 512                                 slot = 0;
 513                                 disk = -1;
 514                                 break;
 515                         }
 516                         disk = r10_bio->devs[slot].devnum;
 517                 }
 518                 goto rb_out;
 519         }
 520
 521
 522         /* make sure the disk is operational */
 523         slot = 0;
 524         disk = r10_bio->devs[slot].devnum;
 525         while ((rdev=rcu_dereference(conf->mirrors[disk].rdev)) == NULL ||
 526                !test_bit(In_sync, &rdev->flags)) {
 527                 slot ++;
 528                 if (slot == conf->copies) {
 529                         disk = -1;
 530                         goto rb_out;
 531                 }
 532                 disk = r10_bio->devs[slot].devnum;
 533         }
 534
 535
 536         current_distance = abs(r10_bio->devs[slot].addr -
 537                                conf->mirrors[disk].head_position);
 538
 539         /* Find the disk whose head is closest */
 540
 541         for (nslot = slot; nslot < conf->copies; nslot++) {
 542                 int ndisk = r10_bio->devs[nslot].devnum;
 543
 544
 545                 if ((rdev=rcu_dereference(conf->mirrors[ndisk].rdev)) == NULL ||
 546                     !test_bit(In_sync, &rdev->flags))
 547                         continue;
 548
 549                 /* This optimisation is debatable, and completely destroys
 550                  * sequential read speed for 'far copies' arrays.  So only
 551                  * keep it for 'near' arrays, and review those later.
 552                  */
 553                 if (conf->near_copies > 1 && !atomic_read(&rdev->nr_pending)) {
 554                         disk = ndisk;
 555                         slot = nslot;
 556                         break;
 557                 }
 558                 new_distance = abs(r10_bio->devs[nslot].addr -
 559                                    conf->mirrors[ndisk].head_position);
 560                 if (new_distance < current_distance) {
 561                         current_distance = new_distance;
 562                         disk = ndisk;
 563                         slot = nslot;
 564                 }
 565         }
 566
 567 rb_out:
 568         r10_bio->read_slot = slot;
 569 /*      conf->next_seq_sect = this_sector + sectors;*/
 570
 571         if (disk >= 0 && (rdev=rcu_dereference(conf->mirrors[disk].rdev))!= NULL)
 572                 atomic_inc(&conf->mirrors[disk].rdev->nr_pending);
 573         rcu_read_unlock();
 574
 575         return disk;
 576 }
 577
 578 static void unplug_slaves(mddev_t *mddev)
 579 {
 580         conf_t *conf = mddev_to_conf(mddev);
 581         int i;
 582
 583         rcu_read_lock();
 584         for (i=0; i<mddev->raid_disks; i++) {
 585                 mdk_rdev_t *rdev = rcu_dereference(conf->mirrors[i].rdev);
 586                 if (rdev && !test_bit(Faulty, &rdev->flags) && atomic_read(&rdev->nr_pending)) {
 587                         request_queue_t *r_queue = bdev_get_queue(rdev->bdev);
 588
 589                         atomic_inc(&rdev->nr_pending);
 590                         rcu_read_unlock();
 591
 592                         if (r_queue->unplug_fn)
 593                                 r_queue->unplug_fn(r_queue);
 594
 595                         rdev_dec_pending(rdev, mddev);
 596                         rcu_read_lock();
 597                 }
 598         }
 599         rcu_read_unlock();
 600 }
 601
 602 static void raid10_unplug(request_queue_t *q)
 603 {
 604         mddev_t *mddev = q->queuedata;
 605
 606         unplug_slaves(q->queuedata);
 607         md_wakeup_thread(mddev->thread);
 608 }
 609
 610 static int raid10_issue_flush(request_queue_t *q, struct gendisk *disk,
 611                              sector_t *error_sector)
 612 {
 613         mddev_t *mddev = q->queuedata;
 614         conf_t *conf = mddev_to_conf(mddev);
 615         int i, ret = 0;
 616
 617         rcu_read_lock();
 618         for (i=0; i<mddev->raid_disks && ret == 0; i++) {
 619                 mdk_rdev_t *rdev = rcu_dereference(conf->mirrors[i].rdev);
 620                 if (rdev && !test_bit(Faulty, &rdev->flags)) {
 621                         struct block_device *bdev = rdev->bdev;
 622                         request_queue_t *r_queue = bdev_get_queue(bdev);
 623
 624                         if (!r_queue->issue_flush_fn)
 625                                 ret = -EOPNOTSUPP;
 626                         else {
 627                                 atomic_inc(&rdev->nr_pending);
 628                                 rcu_read_unlock();
 629                                 ret = r_queue->issue_flush_fn(r_queue, bdev->bd_disk,
 630                                                               error_sector);
 631                                 rdev_dec_pending(rdev, mddev);
 632                                 rcu_read_lock();
 633                         }
 634                 }
 635         }
 636         rcu_read_unlock();
 637         return ret;
 638 }
 639
 640 /* Barriers....
 641  * Sometimes we need to suspend IO while we do something else,
 642  * either some resync/recovery, or reconfigure the array.
 643  * To do this we raise a 'barrier'.
 644  * The 'barrier' is a counter that can be raised multiple times
 645  * to count how many activities are happening which preclude
 646  * normal IO.
 647  * We can only raise the barrier if there is no pending IO.
 648  * i.e. if nr_pending == 0.
 649  * We choose only to raise the barrier if no-one is waiting for the
 650  * barrier to go down.  This means that as soon as an IO request
 651  * is ready, no other operations which require a barrier will start
 652  * until the IO request has had a chance.
 653  *
 654  * So: regular IO calls 'wait_barrier'.  When that returns there
 655  *    is no backgroup IO happening,  It must arrange to call
 656  *    allow_barrier when it has finished its IO.
 657  * backgroup IO calls must call raise_barrier.  Once that returns
 658  *    there is no normal IO happeing.  It must arrange to call
 659  *    lower_barrier when the particular background IO completes.
 660  */
 661 #define RESYNC_DEPTH 32
 662
 663 static void raise_barrier(conf_t *conf, int force)
 664 {
 665         BUG_ON(force && !conf->barrier);
 666         spin_lock_irq(&conf->resync_lock);
 667
 668         /* Wait until no block IO is waiting (unless 'force') */
 669         wait_event_lock_irq(conf->wait_barrier, force || !conf->nr_waiting,
 670                             conf->resync_lock,
 671                             raid10_unplug(conf->mddev->queue));
 672
 673         /* block any new IO from starting */
 674         conf->barrier++;
 675
 676         /* No wait for all pending IO to complete */
 677         wait_event_lock_irq(conf->wait_barrier,
 678                             !conf->nr_pending && conf->barrier < RESYNC_DEPTH,
 679                             conf->resync_lock,
 680                             raid10_unplug(conf->mddev->queue));
 681
 682         spin_unlock_irq(&conf->resync_lock);
 683 }
 684
 685 static void lower_barrier(conf_t *conf)
 686 {
 687         unsigned long flags;
 688         spin_lock_irqsave(&conf->resync_lock, flags);
 689         conf->barrier--;
 690         spin_unlock_irqrestore(&conf->resync_lock, flags);
 691         wake_up(&conf->wait_barrier);
 692 }
 693
 694 static void wait_barrier(conf_t *conf)
 695 {
 696         spin_lock_irq(&conf->resync_lock);
 697         if (conf->barrier) {
 698                 conf->nr_waiting++;
 699                 wait_event_lock_irq(conf->wait_barrier, !conf->barrier,
 700                                     conf->resync_lock,
 701                                     raid10_unplug(conf->mddev->queue));
 702                 conf->nr_waiting--;
 703         }
 704         conf->nr_pending++;
 705         spin_unlock_irq(&conf->resync_lock);
 706 }
 707
 708 static void allow_barrier(conf_t *conf)
 709 {
 710         unsigned long flags;
 711         spin_lock_irqsave(&conf->resync_lock, flags);
 712         conf->nr_pending--;
 713         spin_unlock_irqrestore(&conf->resync_lock, flags);
 714         wake_up(&conf->wait_barrier);
 715 }
 716
 717 static int make_request(request_queue_t *q, struct bio * bio)
 718 {
 719         mddev_t *mddev = q->queuedata;
 720         conf_t *conf = mddev_to_conf(mddev);
 721         mirror_info_t *mirror;
 722         r10bio_t *r10_bio;
 723         struct bio *read_bio;
 724         int i;
 725         int chunk_sects = conf->chunk_mask + 1;
 726         const int rw = bio_data_dir(bio);
 727         struct bio_list bl;
 728         unsigned long flags;
 729
 730         if (unlikely(bio_barrier(bio))) {
 731                 bio_endio(bio, bio->bi_size, -EOPNOTSUPP);
 732                 return 0;
 733         }
 734
 735         /* If this request crosses a chunk boundary, we need to
 736          * split it.  This will only happen for 1 PAGE (or less) requests.
 737          */
 738         if (unlikely( (bio->bi_sector & conf->chunk_mask) + (bio->bi_size >> 9)
 739                       > chunk_sects &&
 740                     conf->near_copies < conf->raid_disks)) {
 741                 struct bio_pair *bp;
 742                 /* Sanity check -- queue functions should prevent this happening */
 743                 if (bio->bi_vcnt != 1 ||
 744                     bio->bi_idx != 0)
 745                         goto bad_map;
 746                 /* This is a one page bio that upper layers
 747                  * refuse to split for us, so we need to split it.
 748                  */
 749                 bp = bio_split(bio, bio_split_pool,
 750                                chunk_sects - (bio->bi_sector & (chunk_sects - 1)) );
 751                 if (make_request(q, &bp->bio1))
 752                         generic_make_request(&bp->bio1);
 753                 if (make_request(q, &bp->bio2))
 754                         generic_make_request(&bp->bio2);
 755
 756                 bio_pair_release(bp);
 757                 return 0;
 758         bad_map:
 759                 printk("raid10_make_request bug: can't convert block across chunks"
 760                        " or bigger than %dk %llu %d\n", chunk_sects/2,
 761                        (unsigned long long)bio->bi_sector, bio->bi_size >> 10);
 762
 763                 bio_io_error(bio, bio->bi_size);
 764                 return 0;
 765         }
 766
 767         md_write_start(mddev, bio);
 768
 769         /*
 770          * Register the new request and wait if the reconstruction
 771          * thread has put up a bar for new requests.
 772          * Continue immediately if no resync is active currently.
 773          */
 774         wait_barrier(conf);
 775
 776         disk_stat_inc(mddev->gendisk, ios[rw]);
 777         disk_stat_add(mddev->gendisk, sectors[rw], bio_sectors(bio));
 778
 779         r10_bio = mempool_alloc(conf->r10bio_pool, GFP_NOIO);
 780
 781         r10_bio->master_bio = bio;
 782         r10_bio->sectors = bio->bi_size >> 9;
 783
 784         r10_bio->mddev = mddev;
 785         r10_bio->sector = bio->bi_sector;
 786         r10_bio->state = 0;
 787
 788         if (rw == READ) {
 789                 /*
 790                  * read balancing logic:
 791                  */
 792                 int disk = read_balance(conf, r10_bio);
 793                 int slot = r10_bio->read_slot;
 794                 if (disk < 0) {
 795                         raid_end_bio_io(r10_bio);
 796                         return 0;
 797                 }
 798                 mirror = conf->mirrors + disk;
 799
 800                 read_bio = bio_clone(bio, GFP_NOIO);
 801
 802                 r10_bio->devs[slot].bio = read_bio;
 803
 804                 read_bio->bi_sector = r10_bio->devs[slot].addr +
 805                         mirror->rdev->data_offset;
 806                 read_bio->bi_bdev = mirror->rdev->bdev;
 807                 read_bio->bi_end_io = raid10_end_read_request;
 808                 read_bio->bi_rw = READ;
 809                 read_bio->bi_private = r10_bio;
 810
 811                 generic_make_request(read_bio);
 812                 return 0;
 813         }
 814
 815         /*
 816          * WRITE:
 817          */
 818         /* first select target devices under spinlock and
 819          * inc refcount on their rdev.  Record them by setting
 820          * bios[x] to bio
 821          */
 822         raid10_find_phys(conf, r10_bio);
 823         rcu_read_lock();
 824         for (i = 0;  i < conf->copies; i++) {
 825                 int d = r10_bio->devs[i].devnum;
 826                 mdk_rdev_t *rdev = rcu_dereference(conf->mirrors[d].rdev);
 827                 if (rdev &&
 828                     !test_bit(Faulty, &rdev->flags)) {
 829                         atomic_inc(&rdev->nr_pending);
 830                         r10_bio->devs[i].bio = bio;
 831                 } else {
 832                         r10_bio->devs[i].bio = NULL;
 833                         set_bit(R10BIO_Degraded, &r10_bio->state);
 834                 }
 835         }
 836         rcu_read_unlock();
 837
 838         atomic_set(&r10_bio->remaining, 0);
 839
 840         bio_list_init(&bl);
 841         for (i = 0; i < conf->copies; i++) {
 842                 struct bio *mbio;
 843                 int d = r10_bio->devs[i].devnum;
 844                 if (!r10_bio->devs[i].bio)
 845                         continue;
 846
 847                 mbio = bio_clone(bio, GFP_NOIO);
 848                 r10_bio->devs[i].bio = mbio;
 849
 850                 mbio->bi_sector = r10_bio->devs[i].addr+
 851                         conf->mirrors[d].rdev->data_offset;
 852                 mbio->bi_bdev = conf->mirrors[d].rdev->bdev;
 853                 mbio->bi_end_io = raid10_end_write_request;
 854                 mbio->bi_rw = WRITE;
 855                 mbio->bi_private = r10_bio;
 856
 857                 atomic_inc(&r10_bio->remaining);
 858                 bio_list_add(&bl, mbio);
 859         }
 860
 861         bitmap_startwrite(mddev->bitmap, bio->bi_sector, r10_bio->sectors, 0);
 862         spin_lock_irqsave(&conf->device_lock, flags);
 863         bio_list_merge(&conf->pending_bio_list, &bl);
 864         blk_plug_device(mddev->queue);
 865         spin_unlock_irqrestore(&conf->device_lock, flags);
 866
 867         return 0;
 868 }
 869
 870 static void status(struct seq_file *seq, mddev_t *mddev)
 871 {
 872         conf_t *conf = mddev_to_conf(mddev);
 873         int i;
 874
 875         if (conf->near_copies < conf->raid_disks)
 876                 seq_printf(seq, " %dK chunks", mddev->chunk_size/1024);
 877         if (conf->near_copies > 1)
 878                 seq_printf(seq, " %d near-copies", conf->near_copies);
 879         if (conf->far_copies > 1)
 880                 seq_printf(seq, " %d far-copies", conf->far_copies);
 881
 882         seq_printf(seq, " [%d/%d] [", conf->raid_disks,
 883                                                 conf->working_disks);
 884         for (i = 0; i < conf->raid_disks; i++)
 885                 seq_printf(seq, "%s",
 886                               conf->mirrors[i].rdev &&
 887                               test_bit(In_sync, &conf->mirrors[i].rdev->flags) ? "U" : "_");
 888         seq_printf(seq, "]");
 889 }
 890
 891 static void error(mddev_t *mddev, mdk_rdev_t *rdev)
 892 {
 893         char b[BDEVNAME_SIZE];
 894         conf_t *conf = mddev_to_conf(mddev);
 895
 896         /*
 897          * If it is not operational, then we have already marked it as dead
 898          * else if it is the last working disks, ignore the error, let the
 899          * next level up know.
 900          * else mark the drive as failed
 901          */
 902         if (test_bit(In_sync, &rdev->flags)
 903             && conf->working_disks == 1)
 904                 /*
 905                  * Don't fail the drive, just return an IO error.
 906                  * The test should really be more sophisticated than
 907                  * "working_disks == 1", but it isn't critical, and
 908                  * can wait until we do more sophisticated "is the drive
 909                  * really dead" tests...
 910                  */
 911                 return;
 912         if (test_bit(In_sync, &rdev->flags)) {
 913                 mddev->degraded++;
 914                 conf->working_disks--;
 915                 /*
 916                  * if recovery is running, make sure it aborts.
 917                  */
 918                 set_bit(MD_RECOVERY_ERR, &mddev->recovery);
 919         }
 920         clear_bit(In_sync, &rdev->flags);
 921         set_bit(Faulty, &rdev->flags);
 922         mddev->sb_dirty = 1;
 923         printk(KERN_ALERT "raid10: Disk failure on %s, disabling device. \n"
 924                 "       Operation continuing on %d devices\n",
 925                 bdevname(rdev->bdev,b), conf->working_disks);
 926 }
 927
 928 static void print_conf(conf_t *conf)
 929 {
 930         int i;
 931         mirror_info_t *tmp;
 932
 933         printk("RAID10 conf printout:\n");
 934         if (!conf) {
 935                 printk("(!conf)\n");
 936                 return;
 937         }
 938         printk(" --- wd:%d rd:%d\n", conf->working_disks,
 939                 conf->raid_disks);
 940
 941         for (i = 0; i < conf->raid_disks; i++) {
 942                 char b[BDEVNAME_SIZE];
 943                 tmp = conf->mirrors + i;
 944                 if (tmp->rdev)
 945                         printk(" disk %d, wo:%d, o:%d, dev:%s\n",
 946                                 i, !test_bit(In_sync, &tmp->rdev->flags),
 947                                 !test_bit(Faulty, &tmp->rdev->flags),
 948                                 bdevname(tmp->rdev->bdev,b));
 949         }
 950 }
 951
 952 static void close_sync(conf_t *conf)
 953 {
 954         wait_barrier(conf);
 955         allow_barrier(conf);
 956
 957         mempool_destroy(conf->r10buf_pool);
 958         conf->r10buf_pool = NULL;
 959 }
 960
 961 /* check if there are enough drives for
 962  * every block to appear on atleast one
 963  */
 964 static int enough(conf_t *conf)
 965 {
 966         int first = 0;
 967
 968         do {
 969                 int n = conf->copies;
 970                 int cnt = 0;
 971                 while (n--) {
 972                         if (conf->mirrors[first].rdev)
 973                                 cnt++;
 974                         first = (first+1) % conf->raid_disks;
 975                 }
 976                 if (cnt == 0)
 977                         return 0;
 978         } while (first != 0);
 979         return 1;
 980 }
 981
 982 static int raid10_spare_active(mddev_t *mddev)
 983 {
 984         int i;
 985         conf_t *conf = mddev->private;
 986         mirror_info_t *tmp;
 987
 988         /*
 989          * Find all non-in_sync disks within the RAID10 configuration
 990          * and mark them in_sync
 991          */
 992         for (i = 0; i < conf->raid_disks; i++) {
 993                 tmp = conf->mirrors + i;
 994                 if (tmp->rdev
 995                     && !test_bit(Faulty, &tmp->rdev->flags)
 996                     && !test_bit(In_sync, &tmp->rdev->flags)) {
 997                         conf->working_disks++;
 998                         mddev->degraded--;
 999                         set_bit(In_sync, &tmp->rdev->flags);
1000                 }
1001         }
1002
1003         print_conf(conf);
1004         return 0;
1005 }
1006
1007
1008 static int raid10_add_disk(mddev_t *mddev, mdk_rdev_t *rdev)
1009 {
1010         conf_t *conf = mddev->private;
1011         int found = 0;
1012         int mirror;
1013         mirror_info_t *p;
1014
1015         if (mddev->recovery_cp < MaxSector)
1016                 /* only hot-add to in-sync arrays, as recovery is
1017                  * very different from resync
1018                  */
1019                 return 0;
1020         if (!enough(conf))
1021                 return 0;
1022
1023         if (rdev->saved_raid_disk >= 0 &&
1024             conf->mirrors[rdev->saved_raid_disk].rdev == NULL)
1025                 mirror = rdev->saved_raid_disk;
1026         else
1027                 mirror = 0;
1028         for ( ; mirror < mddev->raid_disks; mirror++)
1029                 if ( !(p=conf->mirrors+mirror)->rdev) {
1030
1031                         blk_queue_stack_limits(mddev->queue,
1032                                                rdev->bdev->bd_disk->queue);
1033                         /* as we don't honour merge_bvec_fn, we must never risk
1034                          * violating it, so limit ->max_sector to one PAGE, as
1035                          * a one page request is never in violation.
1036                          */
1037                         if (rdev->bdev->bd_disk->queue->merge_bvec_fn &&
1038                             mddev->queue->max_sectors > (PAGE_SIZE>>9))
1039                                 mddev->queue->max_sectors = (PAGE_SIZE>>9);
1040
1041                         p->head_position = 0;
1042                         rdev->raid_disk = mirror;
1043                         found = 1;
1044                         if (rdev->saved_raid_disk != mirror)
1045                                 conf->fullsync = 1;
1046                         rcu_assign_pointer(p->rdev, rdev);
1047                         break;
1048                 }
1049
1050         print_conf(conf);
1051         return found;
1052 }
1053
1054 static int raid10_remove_disk(mddev_t *mddev, int number)
1055 {
1056         conf_t *conf = mddev->private;
1057         int err = 0;
1058         mdk_rdev_t *rdev;
1059         mirror_info_t *p = conf->mirrors+ number;
1060
1061         print_conf(conf);
1062         rdev = p->rdev;
1063         if (rdev) {
1064                 if (test_bit(In_sync, &rdev->flags) ||
1065                     atomic_read(&rdev->nr_pending)) {
1066                         err = -EBUSY;
1067                         goto abort;
1068                 }
1069                 p->rdev = NULL;
1070                 synchronize_rcu();
1071                 if (atomic_read(&rdev->nr_pending)) {
1072                         /* lost the race, try later */
1073                         err = -EBUSY;
1074                         p->rdev = rdev;
1075                 }
1076         }
1077 abort:
1078
1079         print_conf(conf);
1080         return err;
1081 }
1082
1083
1084 static int end_sync_read(struct bio *bio, unsigned int bytes_done, int error)
1085 {
1086         int uptodate = test_bit(BIO_UPTODATE, &bio->bi_flags);
1087         r10bio_t * r10_bio = (r10bio_t *)(bio->bi_private);
1088         conf_t *conf = mddev_to_conf(r10_bio->mddev);
1089         int i,d;
1090
1091         if (bio->bi_size)
1092                 return 1;
1093
1094         for (i=0; i<conf->copies; i++)
1095                 if (r10_bio->devs[i].bio == bio)
1096                         break;
1097         if (i == conf->copies)
1098                 BUG();
1099         update_head_pos(i, r10_bio);
1100         d = r10_bio->devs[i].devnum;
1101         if (!uptodate)
1102                 md_error(r10_bio->mddev,
1103                          conf->mirrors[d].rdev);
1104
1105         /* for reconstruct, we always reschedule after a read.
1106          * for resync, only after all reads
1107          */
1108         if (test_bit(R10BIO_IsRecover, &r10_bio->state) ||
1109             atomic_dec_and_test(&r10_bio->remaining)) {
1110                 /* we have read all the blocks,
1111                  * do the comparison in process context in raid10d
1112                  */
1113                 reschedule_retry(r10_bio);
1114         }
1115         rdev_dec_pending(conf->mirrors[d].rdev, conf->mddev);
1116         return 0;
1117 }
1118
1119 static int end_sync_write(struct bio *bio, unsigned int bytes_done, int error)
1120 {
1121         int uptodate = test_bit(BIO_UPTODATE, &bio->bi_flags);
1122         r10bio_t * r10_bio = (r10bio_t *)(bio->bi_private);
1123         mddev_t *mddev = r10_bio->mddev;
1124         conf_t *conf = mddev_to_conf(mddev);
1125         int i,d;
1126
1127         if (bio->bi_size)
1128                 return 1;
1129
1130         for (i = 0; i < conf->copies; i++)
1131                 if (r10_bio->devs[i].bio == bio)
1132                         break;
1133         d = r10_bio->devs[i].devnum;
1134
1135         if (!uptodate)
1136                 md_error(mddev, conf->mirrors[d].rdev);
1137         update_head_pos(i, r10_bio);
1138
1139         while (atomic_dec_and_test(&r10_bio->remaining)) {
1140                 if (r10_bio->master_bio == NULL) {
1141                         /* the primary of several recovery bios */
1142                         md_done_sync(mddev, r10_bio->sectors, 1);
1143                         put_buf(r10_bio);
1144                         break;
1145                 } else {
1146                         r10bio_t *r10_bio2 = (r10bio_t *)r10_bio->master_bio;
1147                         put_buf(r10_bio);
1148                         r10_bio = r10_bio2;
1149                 }
1150         }
1151         rdev_dec_pending(conf->mirrors[d].rdev, mddev);
1152         return 0;
1153 }
1154
1155 /*
1156  * Note: sync and recover and handled very differently for raid10
1157  * This code is for resync.
1158  * For resync, we read through virtual addresses and read all blocks.
1159  * If there is any error, we schedule a write.  The lowest numbered
1160  * drive is authoritative.
1161  * However requests come for physical address, so we need to map.
1162  * For every physical address there are raid_disks/copies virtual addresses,
1163  * which is always are least one, but is not necessarly an integer.
1164  * This means that a physical address can span multiple chunks, so we may
1165  * have to submit multiple io requests for a single sync request.
1166  */
1167 /*
1168  * We check if all blocks are in-sync and only write to blocks that
1169  * aren't in sync
1170  */
1171 static void sync_request_write(mddev_t *mddev, r10bio_t *r10_bio)
1172 {
1173         conf_t *conf = mddev_to_conf(mddev);
1174         int i, first;
1175         struct bio *tbio, *fbio;
1176
1177         atomic_set(&r10_bio->remaining, 1);
1178
1179         /* find the first device with a block */
1180         for (i=0; i<conf->copies; i++)
1181                 if (test_bit(BIO_UPTODATE, &r10_bio->devs[i].bio->bi_flags))
1182                         break;
1183
1184         if (i == conf->copies)
1185                 goto done;
1186
1187         first = i;
1188         fbio = r10_bio->devs[i].bio;
1189
1190         /* now find blocks with errors */
1191         for (i=first+1 ; i < conf->copies ; i++) {
1192                 int vcnt, j, d;
1193
1194                 if (!test_bit(BIO_UPTODATE, &r10_bio->devs[i].bio->bi_flags))
1195                         continue;
1196                 /* We know that the bi_io_vec layout is the same for
1197                  * both 'first' and 'i', so we just compare them.
1198                  * All vec entries are PAGE_SIZE;
1199                  */
1200                 tbio = r10_bio->devs[i].bio;
1201                 vcnt = r10_bio->sectors >> (PAGE_SHIFT-9);
1202                 for (j = 0; j < vcnt; j++)
1203                         if (memcmp(page_address(fbio->bi_io_vec[j].bv_page),
1204                                    page_address(tbio->bi_io_vec[j].bv_page),
1205                                    PAGE_SIZE))
1206                                 break;
1207                 if (j == vcnt)
1208                         continue;
1209                 /* Ok, we need to write this bio
1210                  * First we need to fixup bv_offset, bv_len and
1211                  * bi_vecs, as the read request might have corrupted these
1212                  */
1213                 tbio->bi_vcnt = vcnt;
1214                 tbio->bi_size = r10_bio->sectors << 9;
1215                 tbio->bi_idx = 0;
1216                 tbio->bi_phys_segments = 0;
1217                 tbio->bi_hw_segments = 0;
1218                 tbio->bi_hw_front_size = 0;
1219                 tbio->bi_hw_back_size = 0;
1220                 tbio->bi_flags &= ~(BIO_POOL_MASK - 1);
1221                 tbio->bi_flags |= 1 << BIO_UPTODATE;
1222                 tbio->bi_next = NULL;
1223                 tbio->bi_rw = WRITE;
1224                 tbio->bi_private = r10_bio;
1225                 tbio->bi_sector = r10_bio->devs[i].addr;
1226
1227                 for (j=0; j < vcnt ; j++) {
1228                         tbio->bi_io_vec[j].bv_offset = 0;
1229                         tbio->bi_io_vec[j].bv_len = PAGE_SIZE;
1230
1231                         memcpy(page_address(tbio->bi_io_vec[j].bv_page),
1232                                page_address(fbio->bi_io_vec[j].bv_page),
1233                                PAGE_SIZE);
1234                 }
1235                 tbio->bi_end_io = end_sync_write;
1236
1237                 d = r10_bio->devs[i].devnum;
1238                 atomic_inc(&conf->mirrors[d].rdev->nr_pending);
1239                 atomic_inc(&r10_bio->remaining);
1240                 md_sync_acct(conf->mirrors[d].rdev->bdev, tbio->bi_size >> 9);
1241
1242                 tbio->bi_sector += conf->mirrors[d].rdev->data_offset;
1243                 tbio->bi_bdev = conf->mirrors[d].rdev->bdev;
1244                 generic_make_request(tbio);
1245         }
1246
1247 done:
1248         if (atomic_dec_and_test(&r10_bio->remaining)) {
1249                 md_done_sync(mddev, r10_bio->sectors, 1);
1250                 put_buf(r10_bio);
1251         }
1252 }
1253
1254 /*
1255  * Now for the recovery code.
1256  * Recovery happens across physical sectors.
1257  * We recover all non-is_sync drives by finding the virtual address of
1258  * each, and then choose a working drive that also has that virt address.
1259  * There is a separate r10_bio for each non-in_sync drive.
1260  * Only the first two slots are in use. The first for reading,
1261  * The second for writing.
1262  *
1263  */
1264
1265 static void recovery_request_write(mddev_t *mddev, r10bio_t *r10_bio)
1266 {
1267         conf_t *conf = mddev_to_conf(mddev);
1268         int i, d;
1269         struct bio *bio, *wbio;
1270
1271
1272         /* move the pages across to the second bio
1273          * and submit the write request
1274          */
1275         bio = r10_bio->devs[0].bio;
1276         wbio = r10_bio->devs[1].bio;
1277         for (i=0; i < wbio->bi_vcnt; i++) {
1278                 struct page *p = bio->bi_io_vec[i].bv_page;
1279                 bio->bi_io_vec[i].bv_page = wbio->bi_io_vec[i].bv_page;
1280                 wbio->bi_io_vec[i].bv_page = p;
1281         }
1282         d = r10_bio->devs[1].devnum;
1283
1284         atomic_inc(&conf->mirrors[d].rdev->nr_pending);
1285         md_sync_acct(conf->mirrors[d].rdev->bdev, wbio->bi_size >> 9);
1286         generic_make_request(wbio);
1287 }
1288
1289
1290 /*
1291  * This is a kernel thread which:
1292  *
1293  *      1.      Retries failed read operations on working mirrors.
1294  *      2.      Updates the raid superblock when problems encounter.
1295  *      3.      Performs writes following reads for array syncronising.
1296  */
1297
1298 static void raid10d(mddev_t *mddev)
1299 {
1300         r10bio_t *r10_bio;
1301         struct bio *bio;
1302         unsigned long flags;
1303         conf_t *conf = mddev_to_conf(mddev);
1304         struct list_head *head = &conf->retry_list;
1305         int unplug=0;
1306         mdk_rdev_t *rdev;
1307
1308         md_check_recovery(mddev);
1309
1310         for (;;) {
1311                 char b[BDEVNAME_SIZE];
1312                 spin_lock_irqsave(&conf->device_lock, flags);
1313
1314                 if (conf->pending_bio_list.head) {
1315                         bio = bio_list_get(&conf->pending_bio_list);
1316                         blk_remove_plug(mddev->queue);
1317                         spin_unlock_irqrestore(&conf->device_lock, flags);
1318                         /* flush any pending bitmap writes to disk before proceeding w/ I/O */
1319                         if (bitmap_unplug(mddev->bitmap) != 0)
1320                                 printk("%s: bitmap file write failed!\n", mdname(mddev));
1321
1322                         while (bio) { /* submit pending writes */
1323                                 struct bio *next = bio->bi_next;
1324                                 bio->bi_next = NULL;
1325                                 generic_make_request(bio);
1326                                 bio = next;
1327                         }
1328                         unplug = 1;
1329
1330                         continue;
1331                 }
1332
1333                 if (list_empty(head))
1334                         break;
1335                 r10_bio = list_entry(head->prev, r10bio_t, retry_list);
1336                 list_del(head->prev);
1337                 spin_unlock_irqrestore(&conf->device_lock, flags);
1338
1339                 mddev = r10_bio->mddev;
1340                 conf = mddev_to_conf(mddev);
1341                 if (test_bit(R10BIO_IsSync, &r10_bio->state)) {
1342                         sync_request_write(mddev, r10_bio);
1343                         unplug = 1;
1344                 } else  if (test_bit(R10BIO_IsRecover, &r10_bio->state)) {
1345                         recovery_request_write(mddev, r10_bio);
1346                         unplug = 1;
1347                 } else {
1348                         int mirror;
1349                         bio = r10_bio->devs[r10_bio->read_slot].bio;
1350                         r10_bio->devs[r10_bio->read_slot].bio = NULL;
1351                         bio_put(bio);
1352                         mirror = read_balance(conf, r10_bio);
1353                         if (mirror == -1) {
1354                                 printk(KERN_ALERT "raid10: %s: unrecoverable I/O"
1355                                        " read error for block %llu\n",
1356                                        bdevname(bio->bi_bdev,b),
1357                                        (unsigned long long)r10_bio->sector);
1358                                 raid_end_bio_io(r10_bio);
1359                         } else {
1360                                 rdev = conf->mirrors[mirror].rdev;
1361                                 if (printk_ratelimit())
1362                                         printk(KERN_ERR "raid10: %s: redirecting sector %llu to"
1363                                                " another mirror\n",
1364                                                bdevname(rdev->bdev,b),
1365                                                (unsigned long long)r10_bio->sector);
1366                                 bio = bio_clone(r10_bio->master_bio, GFP_NOIO);
1367                                 r10_bio->devs[r10_bio->read_slot].bio = bio;
1368                                 bio->bi_sector = r10_bio->devs[r10_bio->read_slot].addr
1369                                         + rdev->data_offset;
1370                                 bio->bi_bdev = rdev->bdev;
1371                                 bio->bi_rw = READ;
1372                                 bio->bi_private = r10_bio;
1373                                 bio->bi_end_io = raid10_end_read_request;
1374                                 unplug = 1;
1375                                 generic_make_request(bio);
1376                         }
1377                 }
1378         }
1379         spin_unlock_irqrestore(&conf->device_lock, flags);
1380         if (unplug)
1381                 unplug_slaves(mddev);
1382 }
1383
1384
1385 static int init_resync(conf_t *conf)
1386 {
1387         int buffs;
1388
1389         buffs = RESYNC_WINDOW / RESYNC_BLOCK_SIZE;
1390         if (conf->r10buf_pool)
1391                 BUG();
1392         conf->r10buf_pool = mempool_create(buffs, r10buf_pool_alloc, r10buf_pool_free, conf);
1393         if (!conf->r10buf_pool)
1394                 return -ENOMEM;
1395         conf->next_resync = 0;
1396         return 0;
1397 }
1398
1399 /*
1400  * perform a "sync" on one "block"
1401  *
1402  * We need to make sure that no normal I/O request - particularly write
1403  * requests - conflict with active sync requests.
1404  *
1405  * This is achieved by tracking pending requests and a 'barrier' concept
1406  * that can be installed to exclude normal IO requests.
1407  *
1408  * Resync and recovery are handled very differently.
1409  * We differentiate by looking at MD_RECOVERY_SYNC in mddev->recovery.
1410  *
1411  * For resync, we iterate over virtual addresses, read all copies,
1412  * and update if there are differences.  If only one copy is live,
1413  * skip it.
1414  * For recovery, we iterate over physical addresses, read a good
1415  * value for each non-in_sync drive, and over-write.
1416  *
1417  * So, for recovery we may have several outstanding complex requests for a
1418  * given address, one for each out-of-sync device.  We model this by allocating
1419  * a number of r10_bio structures, one for each out-of-sync device.
1420  * As we setup these structures, we collect all bio's together into a list
1421  * which we then process collectively to add pages, and then process again
1422  * to pass to generic_make_request.
1423  *
1424  * The r10_bio structures are linked using a borrowed master_bio pointer.
1425  * This link is counted in ->remaining.  When the r10_bio that points to NULL
1426  * has its remaining count decremented to 0, the whole complex operation
1427  * is complete.
1428  *
1429  */
1430
1431 static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, int go_faster)
1432 {
1433         conf_t *conf = mddev_to_conf(mddev);
1434         r10bio_t *r10_bio;
1435         struct bio *biolist = NULL, *bio;
1436         sector_t max_sector, nr_sectors;
1437         int disk;
1438         int i;
1439         int max_sync;
1440         int sync_blocks;
1441
1442         sector_t sectors_skipped = 0;
1443         int chunks_skipped = 0;
1444
1445         if (!conf->r10buf_pool)
1446                 if (init_resync(conf))
1447                         return 0;
1448
1449  skipped:
1450         max_sector = mddev->size << 1;
1451         if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery))
1452                 max_sector = mddev->resync_max_sectors;
1453         if (sector_nr >= max_sector) {
1454                 /* If we aborted, we need to abort the
1455                  * sync on the 'current' bitmap chucks (there can
1456                  * be several when recovering multiple devices).
1457                  * as we may have started syncing it but not finished.
1458                  * We can find the current address in
1459                  * mddev->curr_resync, but for recovery,
1460                  * we need to convert that to several
1461                  * virtual addresses.
1462                  */
1463                 if (mddev->curr_resync < max_sector) { /* aborted */
1464                         if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery))
1465                                 bitmap_end_sync(mddev->bitmap, mddev->curr_resync,
1466                                                 &sync_blocks, 1);
1467                         else for (i=0; i<conf->raid_disks; i++) {
1468                                 sector_t sect =
1469                                         raid10_find_virt(conf, mddev->curr_resync, i);
1470                                 bitmap_end_sync(mddev->bitmap, sect,
1471                                                 &sync_blocks, 1);
1472                         }
1473                 } else /* completed sync */
1474                         conf->fullsync = 0;
1475
1476                 bitmap_close_sync(mddev->bitmap);
1477                 close_sync(conf);
1478                 *skipped = 1;
1479                 return sectors_skipped;
1480         }
1481         if (chunks_skipped >= conf->raid_disks) {
1482                 /* if there has been nothing to do on any drive,
1483                  * then there is nothing to do at all..
1484                  */
1485                 *skipped = 1;
1486                 return (max_sector - sector_nr) + sectors_skipped;
1487         }
1488
1489         /* make sure whole request will fit in a chunk - if chunks
1490          * are meaningful
1491          */
1492         if (conf->near_copies < conf->raid_disks &&
1493             max_sector > (sector_nr | conf->chunk_mask))
1494                 max_sector = (sector_nr | conf->chunk_mask) + 1;
1495         /*
1496          * If there is non-resync activity waiting for us then
1497          * put in a delay to throttle resync.
1498          */
1499         if (!go_faster && conf->nr_waiting)
1500                 msleep_interruptible(1000);
1501
1502         /* Again, very different code for resync and recovery.
1503          * Both must result in an r10bio with a list of bios that
1504          * have bi_end_io, bi_sector, bi_bdev set,
1505          * and bi_private set to the r10bio.
1506          * For recovery, we may actually create several r10bios
1507          * with 2 bios in each, that correspond to the bios in the main one.
1508          * In this case, the subordinate r10bios link back through a
1509          * borrowed master_bio pointer, and the counter in the master
1510          * includes a ref from each subordinate.
1511          */
1512         /* First, we decide what to do and set ->bi_end_io
1513          * To end_sync_read if we want to read, and
1514          * end_sync_write if we will want to write.
1515          */
1516
1517         max_sync = RESYNC_PAGES << (PAGE_SHIFT-9);
1518         if (!test_bit(MD_RECOVERY_SYNC, &mddev->recovery)) {
1519                 /* recovery... the complicated one */
1520                 int i, j, k;
1521                 r10_bio = NULL;
1522
1523                 for (i=0 ; i<conf->raid_disks; i++)
1524                         if (conf->mirrors[i].rdev &&
1525                             !test_bit(In_sync, &conf->mirrors[i].rdev->flags)) {
1526                                 int still_degraded = 0;
1527                                 /* want to reconstruct this device */
1528                                 r10bio_t *rb2 = r10_bio;
1529                                 sector_t sect = raid10_find_virt(conf, sector_nr, i);
1530                                 int must_sync;
1531                                 /* Unless we are doing a full sync, we only need
1532                                  * to recover the block if it is set in the bitmap
1533                                  */
1534                                 must_sync = bitmap_start_sync(mddev->bitmap, sect,
1535                                                               &sync_blocks, 1);
1536                                 if (sync_blocks < max_sync)
1537                                         max_sync = sync_blocks;
1538                                 if (!must_sync &&
1539                                     !conf->fullsync) {
1540                                         /* yep, skip the sync_blocks here, but don't assume
1541                                          * that there will never be anything to do here
1542                                          */
1543                                         chunks_skipped = -1;
1544                                         continue;
1545                                 }
1546
1547                                 r10_bio = mempool_alloc(conf->r10buf_pool, GFP_NOIO);
1548                                 raise_barrier(conf, rb2 != NULL);
1549                                 atomic_set(&r10_bio->remaining, 0);
1550
1551                                 r10_bio->master_bio = (struct bio*)rb2;
1552                                 if (rb2)
1553                                         atomic_inc(&rb2->remaining);
1554                                 r10_bio->mddev = mddev;
1555                                 set_bit(R10BIO_IsRecover, &r10_bio->state);
1556                                 r10_bio->sector = sect;
1557
1558                                 raid10_find_phys(conf, r10_bio);
1559                                 /* Need to check if this section will still be
1560                                  * degraded
1561                                  */
1562                                 for (j=0; j<conf->copies;j++) {
1563                                         int d = r10_bio->devs[j].devnum;
1564                                         if (conf->mirrors[d].rdev == NULL ||
1565                                             test_bit(Faulty, &conf->mirrors[d].rdev->flags))
1566                                                 still_degraded = 1;
1567                                 }
1568                                 must_sync = bitmap_start_sync(mddev->bitmap, sect,
1569                                                               &sync_blocks, still_degraded);
1570
1571                                 for (j=0; j<conf->copies;j++) {
1572                                         int d = r10_bio->devs[j].devnum;
1573                                         if (conf->mirrors[d].rdev &&
1574                                             test_bit(In_sync, &conf->mirrors[d].rdev->flags)) {
1575                                                 /* This is where we read from */
1576                                                 bio = r10_bio->devs[0].bio;
1577                                                 bio->bi_next = biolist;
1578                                                 biolist = bio;
1579                                                 bio->bi_private = r10_bio;
1580                                                 bio->bi_end_io = end_sync_read;
1581                                                 bio->bi_rw = 0;
1582                                                 bio->bi_sector = r10_bio->devs[j].addr +
1583                                                         conf->mirrors[d].rdev->data_offset;
1584                                                 bio->bi_bdev = conf->mirrors[d].rdev->bdev;
1585                                                 atomic_inc(&conf->mirrors[d].rdev->nr_pending);
1586                                                 atomic_inc(&r10_bio->remaining);
1587                                                 /* and we write to 'i' */
1588
1589                                                 for (k=0; k<conf->copies; k++)
1590                                                         if (r10_bio->devs[k].devnum == i)
1591                                                                 break;
1592                                                 bio = r10_bio->devs[1].bio;
1593                                                 bio->bi_next = biolist;
1594                                                 biolist = bio;
1595                                                 bio->bi_private = r10_bio;
1596                                                 bio->bi_end_io = end_sync_write;
1597                                                 bio->bi_rw = 1;
1598                                                 bio->bi_sector = r10_bio->devs[k].addr +
1599                                                         conf->mirrors[i].rdev->data_offset;
1600                                                 bio->bi_bdev = conf->mirrors[i].rdev->bdev;
1601
1602                                                 r10_bio->devs[0].devnum = d;
1603                                                 r10_bio->devs[1].devnum = i;
1604
1605                                                 break;
1606                                         }
1607                                 }
1608                                 if (j == conf->copies) {
1609                                         /* Cannot recover, so abort the recovery */
1610                                         put_buf(r10_bio);
1611                                         r10_bio = rb2;
1612                                         if (!test_and_set_bit(MD_RECOVERY_ERR, &mddev->recovery))
1613                                                 printk(KERN_INFO "raid10: %s: insufficient working devices for recovery.\n",
1614                                                        mdname(mddev));
1615                                         break;
1616                                 }
1617                         }
1618                 if (biolist == NULL) {
1619                         while (r10_bio) {
1620                                 r10bio_t *rb2 = r10_bio;
1621                                 r10_bio = (r10bio_t*) rb2->master_bio;
1622                                 rb2->master_bio = NULL;
1623                                 put_buf(rb2);
1624                         }
1625                         goto giveup;
1626                 }
1627         } else {
1628                 /* resync. Schedule a read for every block at this virt offset */
1629                 int count = 0;
1630
1631                 if (!bitmap_start_sync(mddev->bitmap, sector_nr,
1632                                        &sync_blocks, mddev->degraded) &&
1633                     !conf->fullsync && !test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) {
1634                         /* We can skip this block */
1635                         *skipped = 1;
1636                         return sync_blocks + sectors_skipped;
1637                 }
1638                 if (sync_blocks < max_sync)
1639                         max_sync = sync_blocks;
1640                 r10_bio = mempool_alloc(conf->r10buf_pool, GFP_NOIO);
1641
1642                 r10_bio->mddev = mddev;
1643                 atomic_set(&r10_bio->remaining, 0);
1644                 raise_barrier(conf, 0);
1645                 conf->next_resync = sector_nr;
1646
1647                 r10_bio->master_bio = NULL;
1648                 r10_bio->sector = sector_nr;
1649                 set_bit(R10BIO_IsSync, &r10_bio->state);
1650                 raid10_find_phys(conf, r10_bio);
1651                 r10_bio->sectors = (sector_nr | conf->chunk_mask) - sector_nr +1;
1652
1653                 for (i=0; i<conf->copies; i++) {
1654                         int d = r10_bio->devs[i].devnum;
1655                         bio = r10_bio->devs[i].bio;
1656                         bio->bi_end_io = NULL;
1657                         if (conf->mirrors[d].rdev == NULL ||
1658                             test_bit(Faulty, &conf->mirrors[d].rdev->flags))
1659                                 continue;
1660                         atomic_inc(&conf->mirrors[d].rdev->nr_pending);
1661                         atomic_inc(&r10_bio->remaining);
1662                         bio->bi_next = biolist;
1663                         biolist = bio;
1664                         bio->bi_private = r10_bio;
1665                         bio->bi_end_io = end_sync_read;
1666                         bio->bi_rw = 0;
1667                         bio->bi_sector = r10_bio->devs[i].addr +
1668                                 conf->mirrors[d].rdev->data_offset;
1669                         bio->bi_bdev = conf->mirrors[d].rdev->bdev;
1670                         count++;
1671                 }
1672
1673                 if (count < 2) {
1674                         for (i=0; i<conf->copies; i++) {
1675                                 int d = r10_bio->devs[i].devnum;
1676                                 if (r10_bio->devs[i].bio->bi_end_io)
1677                                         rdev_dec_pending(conf->mirrors[d].rdev, mddev);
1678                         }
1679                         put_buf(r10_bio);
1680                         biolist = NULL;
1681                         goto giveup;
1682                 }
1683         }
1684
1685         for (bio = biolist; bio ; bio=bio->bi_next) {
1686
1687                 bio->bi_flags &= ~(BIO_POOL_MASK - 1);
1688                 if (bio->bi_end_io)
1689                         bio->bi_flags |= 1 << BIO_UPTODATE;
1690                 bio->bi_vcnt = 0;
1691                 bio->bi_idx = 0;
1692                 bio->bi_phys_segments = 0;
1693                 bio->bi_hw_segments = 0;
1694                 bio->bi_size = 0;
1695         }
1696
1697         nr_sectors = 0;
1698         if (sector_nr + max_sync < max_sector)
1699                 max_sector = sector_nr + max_sync;
1700         do {
1701                 struct page *page;
1702                 int len = PAGE_SIZE;
1703                 disk = 0;
1704                 if (sector_nr + (len>>9) > max_sector)
1705                         len = (max_sector - sector_nr) << 9;
1706                 if (len == 0)
1707                         break;
1708                 for (bio= biolist ; bio ; bio=bio->bi_next) {
1709                         page = bio->bi_io_vec[bio->bi_vcnt].bv_page;
1710                         if (bio_add_page(bio, page, len, 0) == 0) {
1711                                 /* stop here */
1712                                 struct bio *bio2;
1713                                 bio->bi_io_vec[bio->bi_vcnt].bv_page = page;
1714                                 for (bio2 = biolist; bio2 && bio2 != bio; bio2 = bio2->bi_next) {
1715                                         /* remove last page from this bio */
1716                                         bio2->bi_vcnt--;
1717                                         bio2->bi_size -= len;
1718                                         bio2->bi_flags &= ~(1<< BIO_SEG_VALID);
1719                                 }
1720                                 goto bio_full;
1721                         }
1722                         disk = i;
1723                 }
1724                 nr_sectors += len>>9;
1725                 sector_nr += len>>9;
1726         } while (biolist->bi_vcnt < RESYNC_PAGES);
1727  bio_full:
1728         r10_bio->sectors = nr_sectors;
1729
1730         while (biolist) {
1731                 bio = biolist;
1732                 biolist = biolist->bi_next;
1733
1734                 bio->bi_next = NULL;
1735                 r10_bio = bio->bi_private;
1736                 r10_bio->sectors = nr_sectors;
1737
1738                 if (bio->bi_end_io == end_sync_read) {
1739                         md_sync_acct(bio->bi_bdev, nr_sectors);
1740                         generic_make_request(bio);
1741                 }
1742         }
1743
1744         if (sectors_skipped)
1745                 /* pretend they weren't skipped, it makes
1746                  * no important difference in this case
1747                  */
1748                 md_done_sync(mddev, sectors_skipped, 1);
1749
1750         return sectors_skipped + nr_sectors;
1751  giveup:
1752         /* There is nowhere to write, so all non-sync
1753          * drives must be failed, so try the next chunk...
1754          */
1755         {
1756         sector_t sec = max_sector - sector_nr;
1757         sectors_skipped += sec;
1758         chunks_skipped ++;
1759         sector_nr = max_sector;
1760         goto skipped;
1761         }
1762 }
1763
1764 static int run(mddev_t *mddev)
1765 {
1766         conf_t *conf;
1767         int i, disk_idx;
1768         mirror_info_t *disk;
1769         mdk_rdev_t *rdev;
1770         struct list_head *tmp;
1771         int nc, fc;
1772         sector_t stride, size;
1773
1774         if (mddev->level != 10) {
1775                 printk(KERN_ERR "raid10: %s: raid level not set correctly... (%d)\n",
1776                        mdname(mddev), mddev->level);
1777                 goto out;
1778         }
1779         nc = mddev->layout & 255;
1780         fc = (mddev->layout >> 8) & 255;
1781         if ((nc*fc) <2 || (nc*fc) > mddev->raid_disks ||
1782             (mddev->layout >> 16)) {
1783                 printk(KERN_ERR "raid10: %s: unsupported raid10 layout: 0x%8x\n",
1784                        mdname(mddev), mddev->layout);
1785                 goto out;
1786         }
1787         /*
1788          * copy the already verified devices into our private RAID10
1789          * bookkeeping area. [whatever we allocate in run(),
1790          * should be freed in stop()]
1791          */
1792         conf = kmalloc(sizeof(conf_t), GFP_KERNEL);
1793         mddev->private = conf;
1794         if (!conf) {
1795                 printk(KERN_ERR "raid10: couldn't allocate memory for %s\n",
1796                         mdname(mddev));
1797                 goto out;
1798         }
1799         memset(conf, 0, sizeof(*conf));
1800         conf->mirrors = kmalloc(sizeof(struct mirror_info)*mddev->raid_disks,
1801                                  GFP_KERNEL);
1802         if (!conf->mirrors) {
1803                 printk(KERN_ERR "raid10: couldn't allocate memory for %s\n",
1804                        mdname(mddev));
1805                 goto out_free_conf;
1806         }
1807         memset(conf->mirrors, 0, sizeof(struct mirror_info)*mddev->raid_disks);
1808
1809         conf->near_copies = nc;
1810         conf->far_copies = fc;
1811         conf->copies = nc*fc;
1812         conf->chunk_mask = (sector_t)(mddev->chunk_size>>9)-1;
1813         conf->chunk_shift = ffz(~mddev->chunk_size) - 9;
1814         stride = mddev->size >> (conf->chunk_shift-1);
1815         sector_div(stride, fc);
1816         conf->stride = stride << conf->chunk_shift;
1817
1818         conf->r10bio_pool = mempool_create(NR_RAID10_BIOS, r10bio_pool_alloc,
1819                                                 r10bio_pool_free, conf);
1820         if (!conf->r10bio_pool) {
1821                 printk(KERN_ERR "raid10: couldn't allocate memory for %s\n",
1822                         mdname(mddev));
1823                 goto out_free_conf;
1824         }
1825
1826         ITERATE_RDEV(mddev, rdev, tmp) {
1827                 disk_idx = rdev->raid_disk;
1828                 if (disk_idx >= mddev->raid_disks
1829                     || disk_idx < 0)
1830                         continue;
1831                 disk = conf->mirrors + disk_idx;
1832
1833                 disk->rdev = rdev;
1834
1835                 blk_queue_stack_limits(mddev->queue,
1836                                        rdev->bdev->bd_disk->queue);
1837                 /* as we don't honour merge_bvec_fn, we must never risk
1838                  * violating it, so limit ->max_sector to one PAGE, as
1839                  * a one page request is never in violation.
1840                  */
1841                 if (rdev->bdev->bd_disk->queue->merge_bvec_fn &&
1842                     mddev->queue->max_sectors > (PAGE_SIZE>>9))
1843                         mddev->queue->max_sectors = (PAGE_SIZE>>9);
1844
1845                 disk->head_position = 0;
1846                 if (!test_bit(Faulty, &rdev->flags) && test_bit(In_sync, &rdev->flags))
1847                         conf->working_disks++;
1848         }
1849         conf->raid_disks = mddev->raid_disks;
1850         conf->mddev = mddev;
1851         spin_lock_init(&conf->device_lock);
1852         INIT_LIST_HEAD(&conf->retry_list);
1853
1854         spin_lock_init(&conf->resync_lock);
1855         init_waitqueue_head(&conf->wait_barrier);
1856
1857         /* need to check that every block has at least one working mirror */
1858         if (!enough(conf)) {
1859                 printk(KERN_ERR "raid10: not enough operational mirrors for %s\n",
1860                        mdname(mddev));
1861                 goto out_free_conf;
1862         }
1863
1864         mddev->degraded = 0;
1865         for (i = 0; i < conf->raid_disks; i++) {
1866
1867                 disk = conf->mirrors + i;
1868
1869                 if (!disk->rdev) {
1870                         disk->head_position = 0;
1871                         mddev->degraded++;
1872                 }
1873         }
1874
1875
1876         mddev->thread = md_register_thread(raid10d, mddev, "%s_raid10");
1877         if (!mddev->thread) {
1878                 printk(KERN_ERR
1879                        "raid10: couldn't allocate thread for %s\n",
1880                        mdname(mddev));
1881                 goto out_free_conf;
1882         }
1883
1884         printk(KERN_INFO
1885                 "raid10: raid set %s active with %d out of %d devices\n",
1886                 mdname(mddev), mddev->raid_disks - mddev->degraded,
1887                 mddev->raid_disks);
1888         /*
1889          * Ok, everything is just fine now
1890          */
1891         size = conf->stride * conf->raid_disks;
1892         sector_div(size, conf->near_copies);
1893         mddev->array_size = size/2;
1894         mddev->resync_max_sectors = size;
1895
1896         mddev->queue->unplug_fn = raid10_unplug;
1897         mddev->queue->issue_flush_fn = raid10_issue_flush;
1898
1899         /* Calculate max read-ahead size.
1900          * We need to readahead at least twice a whole stripe....
1901          * maybe...
1902          */
1903         {
1904                 int stripe = conf->raid_disks * mddev->chunk_size / PAGE_CACHE_SIZE;
1905                 stripe /= conf->near_copies;
1906                 if (mddev->queue->backing_dev_info.ra_pages < 2* stripe)
1907                         mddev->queue->backing_dev_info.ra_pages = 2* stripe;
1908         }
1909
1910         if (conf->near_copies < mddev->raid_disks)
1911                 blk_queue_merge_bvec(mddev->queue, raid10_mergeable_bvec);
1912         return 0;
1913
1914 out_free_conf:
1915         if (conf->r10bio_pool)
1916                 mempool_destroy(conf->r10bio_pool);
1917         kfree(conf->mirrors);
1918         kfree(conf);
1919         mddev->private = NULL;
1920 out:
1921         return -EIO;
1922 }
1923
1924 static int stop(mddev_t *mddev)
1925 {
1926         conf_t *conf = mddev_to_conf(mddev);
1927
1928         md_unregister_thread(mddev->thread);
1929         mddev->thread = NULL;
1930         blk_sync_queue(mddev->queue); /* the unplug fn references 'conf'*/
1931         if (conf->r10bio_pool)
1932                 mempool_destroy(conf->r10bio_pool);
1933         kfree(conf->mirrors);
1934         kfree(conf);
1935         mddev->private = NULL;
1936         return 0;
1937 }
1938
1939 static void raid10_quiesce(mddev_t *mddev, int state)
1940 {
1941         conf_t *conf = mddev_to_conf(mddev);
1942
1943         switch(state) {
1944         case 1:
1945                 raise_barrier(conf, 0);
1946                 break;
1947         case 0:
1948                 lower_barrier(conf);
1949                 break;
1950         }
1951         if (mddev->thread) {
1952                 if (mddev->bitmap)
1953                         mddev->thread->timeout = mddev->bitmap->daemon_sleep * HZ;
1954                 else
1955                         mddev->thread->timeout = MAX_SCHEDULE_TIMEOUT;
1956                 md_wakeup_thread(mddev->thread);
1957         }
1958 }
1959
1960 static mdk_personality_t raid10_personality =
1961 {
1962         .name           = "raid10",
1963         .owner          = THIS_MODULE,
1964         .make_request   = make_request,
1965         .run            = run,
1966         .stop           = stop,
1967         .status         = status,
1968         .error_handler  = error,
1969         .hot_add_disk   = raid10_add_disk,
1970         .hot_remove_disk= raid10_remove_disk,
1971         .spare_active   = raid10_spare_active,
1972         .sync_request   = sync_request,
1973         .quiesce        = raid10_quiesce,
1974 };
1975
1976 static int __init raid_init(void)
1977 {
1978         return register_md_personality(RAID10, &raid10_personality);
1979 }
1980
1981 static void raid_exit(void)
1982 {
1983         unregister_md_personality(RAID10);
1984 }
1985
1986 module_init(raid_init);
1987 module_exit(raid_exit);
1988 MODULE_LICENSE("GPL");
1989 MODULE_ALIAS("md-personality-9"); /* RAID10 */