5 tristate "HiSax SiemensChipSet driver support"
8 This is a driver supporting the Siemens chipset on various
9 ISDN-cards (like AVM A1, Elsa ISDN cards, Teles S0-16.0, Teles
10 S0-16.3, Teles S0-8, Teles/Creatix PnP, ITK micro ix1 and many
13 HiSax is just the name of this driver, not the name of any hardware.
15 If you have a card with such a chipset, you should say Y here and
16 also to the configuration option of the driver for your particular
21 comment "D-channel protocol features"
24 bool "HiSax Support for EURO/DSS1"
26 Say Y or N according to the D-channel protocol which your local
27 telephone service company provides.
29 The call control protocol E-DSS1 is used in most European countries.
33 bool "Support for german chargeinfo"
36 If you want that the HiSax hardware driver sends messages to the
37 upper level of the isdn code on each AOCD (Advice Of Charge, During
38 the call -- transmission of the fee information during a call) and
39 on each AOCE (Advice Of Charge, at the End of the call --
40 transmission of fee information at the end of the call), say Y here.
41 This works only in Germany.
43 config HISAX_NO_SENDCOMPLETE
44 bool "Disable sending complete"
47 If you have trouble with some ugly exchanges or you live in
48 Australia select this option.
51 bool "Disable sending low layer compatibility"
54 If you have trouble with some ugly exchanges try to select this
57 config HISAX_NO_KEYPAD
58 bool "Disable keypad protocol option"
61 If you like to send special dial strings including * or # without
62 using the keypad protocol, select this option.
65 bool "HiSax Support for german 1TR6"
67 Say Y or N according to the D-channel protocol which your local
68 telephone service company provides.
70 1TR6 is an old call control protocol which was used in Germany
71 before E-DSS1 was established. Nowadays, all new lines in Germany
75 bool "HiSax Support for US NI1"
77 Enable this if you like to use ISDN in US on a NI1 basic rate
80 config HISAX_MAX_CARDS
81 int "Maximum number of cards supported by HiSax"
84 This option allows you to specify the maximum number of cards which
85 the HiSax driver will be able to handle.
87 comment "HiSax supported cards"
93 This enables HiSax support for the Teles ISDN-cards S0-16.0, S0-8
96 See <file:Documentation/isdn/README.HiSax> on how to configure it
97 using the different cards, a different D-channel protocol, or
98 non-standard IRQ/port/shmem settings.
101 bool "Teles 16.3 or PNP or PCMCIA"
103 This enables HiSax support for the Teles ISDN-cards S0-16.3 the
104 Teles/Creatix PnP and the Teles PCMCIA.
106 See <file:Documentation/isdn/README.HiSax> on how to configure it
107 using the different cards, a different D-channel protocol, or
108 non-standard IRQ/port settings.
110 config HISAX_TELESPCI
112 depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
114 This enables HiSax support for the Teles PCI.
115 See <file:Documentation/isdn/README.HiSax> on how to configure it.
120 This enables HiSax support for the Teles/Creatix parallel port
121 S0BOX. See <file:Documentation/isdn/README.HiSax> on how to
125 bool "AVM A1 (Fritz)"
128 This enables HiSax support for the AVM A1 (aka "Fritz").
130 See <file:Documentation/isdn/README.HiSax> on how to configure it
131 using the different cards, a different D-channel protocol, or
132 non-standard IRQ/port settings.
134 config HISAX_FRITZPCI
135 bool "AVM PnP/PCI (Fritz!PnP/PCI)"
136 depends on BROKEN || !PPC64
138 This enables HiSax support for the AVM "Fritz!PnP" and "Fritz!PCI".
139 See <file:Documentation/isdn/README.HiSax> on how to configure it.
141 config HISAX_AVM_A1_PCMCIA
142 bool "AVM A1 PCMCIA (Fritz)"
144 This enables HiSax support for the AVM A1 "Fritz!PCMCIA").
145 See <file:Documentation/isdn/README.HiSax> on how to configure it.
150 This enables HiSax support for the Elsa Mircolink ISA cards, for the
151 Elsa Quickstep series cards and Elsa PCMCIA.
153 See <file:Documentation/isdn/README.HiSax> on how to configure it
154 using the different cards, a different D-channel protocol, or
155 non-standard IRQ/port settings.
157 config HISAX_IX1MICROR2
158 bool "ITK ix1-micro Revision 2"
161 This enables HiSax support for the ITK ix1-micro Revision 2 card.
163 See <file:Documentation/isdn/README.HiSax> on how to configure it
164 using the different cards, a different D-channel protocol, or
165 non-standard IRQ/port settings.
167 config HISAX_DIEHLDIVA
168 bool "Eicon.Diehl Diva cards"
170 This enables HiSax support for the Eicon.Diehl Diva none PRO
171 versions passive ISDN cards.
173 See <file:Documentation/isdn/README.HiSax> on how to configure it
174 using the different cards, a different D-channel protocol, or
175 non-standard IRQ/port settings.
178 bool "ASUSCOM ISA cards"
181 This enables HiSax support for the AsusCom and their OEM versions
182 passive ISDN ISA cards.
184 See <file:Documentation/isdn/README.HiSax> on how to configure it
185 using the different cards, a different D-channel protocol, or
186 non-standard IRQ/port settings.
192 This enables HiSax support for the TELEINT SA1 semiactiv ISDN card.
194 See <file:Documentation/isdn/README.HiSax> on how to configure it
195 using the different cards, a different D-channel protocol, or
196 non-standard IRQ/port settings.
199 bool "HFC-S based cards"
202 This enables HiSax support for the HFC-S 2BDS0 based cards, like
205 See <file:Documentation/isdn/README.HiSax> on how to configure it
206 using the different cards, a different D-channel protocol, or
207 non-standard IRQ/port settings.
209 config HISAX_SEDLBAUER
210 bool "Sedlbauer cards"
212 This enables HiSax support for the Sedlbauer passive ISDN cards.
214 See <file:Documentation/isdn/README.HiSax> on how to configure it
215 using the different cards, a different D-channel protocol, or
216 non-standard IRQ/port settings.
218 config HISAX_SPORTSTER
219 bool "USR Sportster internal TA"
222 This enables HiSax support for the USR Sportster internal TA card.
224 See <file:Documentation/isdn/README.HiSax> on how to configure it
225 using a different D-channel protocol, or non-standard IRQ/port
232 This enables HiSax support for the ITH MIC card.
234 See <file:Documentation/isdn/README.HiSax> on how to configure it
235 using a different D-channel protocol, or non-standard IRQ/port
240 depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
242 This enables HiSax support for the NetJet from Traverse
245 See <file:Documentation/isdn/README.HiSax> on how to configure it
246 using a different D-channel protocol, or non-standard IRQ/port
249 config HISAX_NETJET_U
250 bool "NETspider U card"
251 depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
253 This enables HiSax support for the Netspider U interface ISDN card
254 from Traverse Technologies.
255 See <file:Documentation/isdn/README.HiSax> on how to configure it
256 using a different D-channel protocol, or non-standard IRQ/port
260 bool "Niccy PnP/PCI card"
262 This enables HiSax support for the Dr. Neuhaus Niccy PnP or PCI.
264 See <file:Documentation/isdn/README.HiSax> on how to configure it
265 using a different D-channel protocol, or non-standard IRQ/port
269 bool "Siemens I-Surf card"
272 This enables HiSax support for the Siemens I-Talk/I-Surf card with
274 See <file:Documentation/isdn/README.HiSax> on how to configure it
275 using a different D-channel protocol, or non-standard IRQ/port
278 config HISAX_HSTSAPHIR
279 bool "HST Saphir card"
282 This enables HiSax support for the HST Saphir card.
284 See <file:Documentation/isdn/README.HiSax> on how to configure it
285 using a different D-channel protocol, or non-standard IRQ/port
289 bool "Telekom A4T card"
292 This enables HiSax support for the Telekom A4T card.
294 See <file:Documentation/isdn/README.HiSax> on how to configure it
295 using a different D-channel protocol, or non-standard IRQ/port
298 config HISAX_SCT_QUADRO
299 bool "Scitel Quadro card"
302 This enables HiSax support for the Scitel Quadro card.
304 See <file:Documentation/isdn/README.HiSax> on how to configure it
305 using a different D-channel protocol, or non-standard IRQ/port
311 This enables HiSax support for the Gazel cards.
313 See <file:Documentation/isdn/README.HiSax> on how to configure it
314 using a different D-channel protocol, or non-standard IRQ/port
318 bool "HFC PCI-Bus cards"
319 depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
321 This enables HiSax support for the HFC-S PCI 2BDS0 based cards.
323 For more information see under
324 <file:Documentation/isdn/README.hfc-pci>.
327 bool "Winbond W6692 based cards"
330 This enables HiSax support for Winbond W6692 based PCI ISDN cards.
332 See <file:Documentation/isdn/README.HiSax> on how to configure it
333 using a different D-channel protocol, or non-standard IRQ/port
337 bool "HFC-S+, HFC-SP, HFC-PCMCIA cards"
339 This enables HiSax support for the HFC-S+, HFC-SP and HFC-PCMCIA
340 cards. This code is not finished yet.
342 config HISAX_ENTERNOW_PCI
343 bool "Formula-n enter:now PCI card"
344 depends on HISAX_NETJET && PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
346 This enables HiSax support for the Formula-n enter:now PCI
354 bool "HiSax debugging"
356 This enables debugging code in the new-style HiSax drivers, i.e.
357 the ST5481 USB driver currently.
358 If in doubt, say yes.
360 comment "HiSax PCMCIA card service modules"
362 config HISAX_SEDLBAUER_CS
363 tristate "Sedlbauer PCMCIA cards"
364 depends on PCMCIA && HISAX_SEDLBAUER
366 This enables the PCMCIA client driver for the Sedlbauer Speed Star
367 and Speed Star II cards.
370 tristate "ELSA PCMCIA MicroLink cards"
371 depends on PCMCIA && HISAX_ELSA
373 This enables the PCMCIA client driver for the Elsa PCMCIA MicroLink
376 config HISAX_AVM_A1_CS
377 tristate "AVM A1 PCMCIA cards"
378 depends on PCMCIA && ISDN_DRV_HISAX
380 This enables the PCMCIA client driver for the AVM A1 / Fritz!Card
383 config HISAX_TELES_CS
384 tristate "TELES PCMCIA cards"
385 depends on PCMCIA && HISAX_16_3
387 This enables the PCMCIA client driver for the Teles PCMCIA cards.
389 comment "HiSax sub driver modules"
392 tristate "ST5481 USB ISDN modem (EXPERIMENTAL)"
393 depends on USB && EXPERIMENTAL
398 This enables the driver for ST5481 based USB ISDN adapters,
399 e.g. the BeWan Gazel 128 USB
402 tristate "HFC USB based ISDN modems (EXPERIMENTAL)"
403 depends on USB && EXPERIMENTAL
405 This enables the driver for HFC USB based ISDN modems.
408 tristate "HFC-4S/8S based ISDN cards (EXPERIMENTAL)"
409 depends on EXPERIMENTAL
411 This enables the driver for HFC-4S/8S based ISDN cards.
413 config HISAX_FRITZ_PCIPNP
414 tristate "AVM Fritz!Card PCI/PCIv2/PnP support (EXPERIMENTAL)"
415 depends on PCI && EXPERIMENTAL
417 This enables the driver for the AVM Fritz!Card PCI,
418 Fritz!Card PCI v2 and Fritz!Card PnP.
419 (the latter also needs you to select "ISA Plug and Play support"
420 from the menu "Plug and Play configuration")
422 config HISAX_AVM_A1_PCMCIA
424 depends on HISAX_AVM_A1_CS