drivers/infiniband/hw/ipath/ipath_intr.c

   1 /*
   2  * Copyright (c) 2006 QLogic, Inc. All rights reserved.
   3  * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
   4  *
   5  * This software is available to you under a choice of one of two
   6  * licenses.  You may choose to be licensed under the terms of the GNU
   7  * General Public License (GPL) Version 2, available from the file
   8  * COPYING in the main directory of this source tree, or the
   9  * OpenIB.org BSD license below:
  10  *
  11  *     Redistribution and use in source and binary forms, with or
  12  *     without modification, are permitted provided that the following
  13  *     conditions are met:
  14  *
  15  *      - Redistributions of source code must retain the above
  16  *        copyright notice, this list of conditions and the following
  17  *        disclaimer.
  18  *
  19  *      - Redistributions in binary form must reproduce the above
  20  *        copyright notice, this list of conditions and the following
  21  *        disclaimer in the documentation and/or other materials
  22  *        provided with the distribution.
  23  *
  24  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  25  * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
  26  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  27  * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
  28  * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
  29  * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
  30  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  31  * SOFTWARE.
  32  */
  33
  34 #include <linux/pci.h>
  35
  36 #include "ipath_kernel.h"
  37 #include "ipath_verbs.h"
  38 #include "ipath_common.h"
  39
  40 /*
  41  * clear (write) a pio buffer, to clear a parity error.   This routine
  42  * should only be called when in freeze mode, and the buffer should be
  43  * canceled afterwards.
  44  */
  45 static void ipath_clrpiobuf(struct ipath_devdata *dd, u32 pnum)
  46 {
  47         u32 __iomem *pbuf;
  48         u32 dwcnt; /* dword count to write */
  49         if (pnum < dd->ipath_piobcnt2k) {
  50                 pbuf = (u32 __iomem *) (dd->ipath_pio2kbase + pnum *
  51                         dd->ipath_palign);
  52                 dwcnt = dd->ipath_piosize2k >> 2;
  53         }
  54         else {
  55                 pbuf = (u32 __iomem *) (dd->ipath_pio4kbase +
  56                         (pnum - dd->ipath_piobcnt2k) * dd->ipath_4kalign);
  57                 dwcnt = dd->ipath_piosize4k >> 2;
  58         }
  59         dev_info(&dd->pcidev->dev,
  60                 "Rewrite PIO buffer %u, to recover from parity error\n",
  61                 pnum);
  62         *pbuf = dwcnt+1; /* no flush required, since already in freeze */
  63         while(--dwcnt)
  64                 *pbuf++ = 0;
  65 }
  66
  67 /*
  68  * Called when we might have an error that is specific to a particular
  69  * PIO buffer, and may need to cancel that buffer, so it can be re-used.
  70  * If rewrite is true, and bits are set in the sendbufferror registers,
  71  * we'll write to the buffer, for error recovery on parity errors.
  72  */
  73 void ipath_disarm_senderrbufs(struct ipath_devdata *dd, int rewrite)
  74 {
  75         u32 piobcnt;
  76         unsigned long sbuf[4];
  77         /*
  78          * it's possible that sendbuffererror could have bits set; might
  79          * have already done this as a result of hardware error handling
  80          */
  81         piobcnt = dd->ipath_piobcnt2k + dd->ipath_piobcnt4k;
  82         /* read these before writing errorclear */
  83         sbuf[0] = ipath_read_kreg64(
  84                 dd, dd->ipath_kregs->kr_sendbuffererror);
  85         sbuf[1] = ipath_read_kreg64(
  86                 dd, dd->ipath_kregs->kr_sendbuffererror + 1);
  87         if (piobcnt > 128) {
  88                 sbuf[2] = ipath_read_kreg64(
  89                         dd, dd->ipath_kregs->kr_sendbuffererror + 2);
  90                 sbuf[3] = ipath_read_kreg64(
  91                         dd, dd->ipath_kregs->kr_sendbuffererror + 3);
  92         }
  93
  94         if (sbuf[0] || sbuf[1] || (piobcnt > 128 && (sbuf[2] || sbuf[3]))) {
  95                 int i;
  96                 if (ipath_debug & (__IPATH_PKTDBG|__IPATH_DBG)) {
  97                         __IPATH_DBG_WHICH(__IPATH_PKTDBG|__IPATH_DBG,
  98                                           "SendbufErrs %lx %lx", sbuf[0],
  99                                           sbuf[1]);
 100                         if (ipath_debug & __IPATH_PKTDBG && piobcnt > 128)
 101                                 printk(" %lx %lx ", sbuf[2], sbuf[3]);
 102                         printk("\n");
 103                 }
 104
 105                 for (i = 0; i < piobcnt; i++)
 106                         if (test_bit(i, sbuf)) {
 107                                 if (rewrite)
 108                                         ipath_clrpiobuf(dd, i);
 109                                 ipath_disarm_piobufs(dd, i, 1);
 110                         }
 111                 dd->ipath_lastcancel = jiffies+3; /* no armlaunch for a bit */
 112         }
 113 }
 114
 115
 116 /* These are all rcv-related errors which we want to count for stats */
 117 #define E_SUM_PKTERRS \
 118         (INFINIPATH_E_RHDRLEN | INFINIPATH_E_RBADTID | \
 119          INFINIPATH_E_RBADVERSION | INFINIPATH_E_RHDR | \
 120          INFINIPATH_E_RLONGPKTLEN | INFINIPATH_E_RSHORTPKTLEN | \
 121          INFINIPATH_E_RMAXPKTLEN | INFINIPATH_E_RMINPKTLEN | \
 122          INFINIPATH_E_RFORMATERR | INFINIPATH_E_RUNSUPVL | \
 123          INFINIPATH_E_RUNEXPCHAR | INFINIPATH_E_REBP)
 124
 125 /* These are all send-related errors which we want to count for stats */
 126 #define E_SUM_ERRS \
 127         (INFINIPATH_E_SPIOARMLAUNCH | INFINIPATH_E_SUNEXPERRPKTNUM | \
 128          INFINIPATH_E_SDROPPEDDATAPKT | INFINIPATH_E_SDROPPEDSMPPKT | \
 129          INFINIPATH_E_SMAXPKTLEN | INFINIPATH_E_SUNSUPVL | \
 130          INFINIPATH_E_SMINPKTLEN | INFINIPATH_E_SPKTLEN | \
 131          INFINIPATH_E_INVALIDADDR)
 132
 133 /*
 134  * these are errors that can occur when the link changes state while
 135  * a packet is being sent or received.  This doesn't cover things
 136  * like EBP or VCRC that can be the result of a sending having the
 137  * link change state, so we receive a "known bad" packet.
 138  */
 139 #define E_SUM_LINK_PKTERRS \
 140         (INFINIPATH_E_SDROPPEDDATAPKT | INFINIPATH_E_SDROPPEDSMPPKT | \
 141          INFINIPATH_E_SMINPKTLEN | INFINIPATH_E_SPKTLEN | \
 142          INFINIPATH_E_RSHORTPKTLEN | INFINIPATH_E_RMINPKTLEN | \
 143          INFINIPATH_E_RUNEXPCHAR)
 144
 145 static u64 handle_e_sum_errs(struct ipath_devdata *dd, ipath_err_t errs)
 146 {
 147         u64 ignore_this_time = 0;
 148
 149         ipath_disarm_senderrbufs(dd, 0);
 150         if ((errs & E_SUM_LINK_PKTERRS) &&
 151             !(dd->ipath_flags & IPATH_LINKACTIVE)) {
 152                 /*
 153                  * This can happen when SMA is trying to bring the link
 154                  * up, but the IB link changes state at the "wrong" time.
 155                  * The IB logic then complains that the packet isn't
 156                  * valid.  We don't want to confuse people, so we just
 157                  * don't print them, except at debug
 158                  */
 159                 ipath_dbg("Ignoring packet errors %llx, because link not "
 160                           "ACTIVE\n", (unsigned long long) errs);
 161                 ignore_this_time = errs & E_SUM_LINK_PKTERRS;
 162         }
 163
 164         return ignore_this_time;
 165 }
 166
 167 /* generic hw error messages... */
 168 #define INFINIPATH_HWE_TXEMEMPARITYERR_MSG(a) \
 169         { \
 170                 .mask = ( INFINIPATH_HWE_TXEMEMPARITYERR_##a <<    \
 171                           INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT ),   \
 172                 .msg = "TXE " #a " Memory Parity"            \
 173         }
 174 #define INFINIPATH_HWE_RXEMEMPARITYERR_MSG(a) \
 175         { \
 176                 .mask = ( INFINIPATH_HWE_RXEMEMPARITYERR_##a <<    \
 177                           INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT ),   \
 178                 .msg = "RXE " #a " Memory Parity"            \
 179         }
 180
 181 static const struct ipath_hwerror_msgs ipath_generic_hwerror_msgs[] = {
 182         INFINIPATH_HWE_MSG(IBCBUSFRSPCPARITYERR, "IPATH2IB Parity"),
 183         INFINIPATH_HWE_MSG(IBCBUSTOSPCPARITYERR, "IB2IPATH Parity"),
 184
 185         INFINIPATH_HWE_TXEMEMPARITYERR_MSG(PIOBUF),
 186         INFINIPATH_HWE_TXEMEMPARITYERR_MSG(PIOPBC),
 187         INFINIPATH_HWE_TXEMEMPARITYERR_MSG(PIOLAUNCHFIFO),
 188
 189         INFINIPATH_HWE_RXEMEMPARITYERR_MSG(RCVBUF),
 190         INFINIPATH_HWE_RXEMEMPARITYERR_MSG(LOOKUPQ),
 191         INFINIPATH_HWE_RXEMEMPARITYERR_MSG(EAGERTID),
 192         INFINIPATH_HWE_RXEMEMPARITYERR_MSG(EXPTID),
 193         INFINIPATH_HWE_RXEMEMPARITYERR_MSG(FLAGBUF),
 194         INFINIPATH_HWE_RXEMEMPARITYERR_MSG(DATAINFO),
 195         INFINIPATH_HWE_RXEMEMPARITYERR_MSG(HDRINFO),
 196 };
 197
 198 /**
 199  * ipath_format_hwmsg - format a single hwerror message
 200  * @msg message buffer
 201  * @msgl length of message buffer
 202  * @hwmsg message to add to message buffer
 203  */
 204 static void ipath_format_hwmsg(char *msg, size_t msgl, const char *hwmsg)
 205 {
 206         strlcat(msg, "[", msgl);
 207         strlcat(msg, hwmsg, msgl);
 208         strlcat(msg, "]", msgl);
 209 }
 210
 211 /**
 212  * ipath_format_hwerrors - format hardware error messages for display
 213  * @hwerrs hardware errors bit vector
 214  * @hwerrmsgs hardware error descriptions
 215  * @nhwerrmsgs number of hwerrmsgs
 216  * @msg message buffer
 217  * @msgl message buffer length
 218  */
 219 void ipath_format_hwerrors(u64 hwerrs,
 220                            const struct ipath_hwerror_msgs *hwerrmsgs,
 221                            size_t nhwerrmsgs,
 222                            char *msg, size_t msgl)
 223 {
 224         int i;
 225         const int glen =
 226             sizeof(ipath_generic_hwerror_msgs) /
 227             sizeof(ipath_generic_hwerror_msgs[0]);
 228
 229         for (i=0; i<glen; i++) {
 230                 if (hwerrs & ipath_generic_hwerror_msgs[i].mask) {
 231                         ipath_format_hwmsg(msg, msgl,
 232                                            ipath_generic_hwerror_msgs[i].msg);
 233                 }
 234         }
 235
 236         for (i=0; i<nhwerrmsgs; i++) {
 237                 if (hwerrs & hwerrmsgs[i].mask) {
 238                         ipath_format_hwmsg(msg, msgl, hwerrmsgs[i].msg);
 239                 }
 240         }
 241 }
 242
 243 /* return the strings for the most common link states */
 244 static char *ib_linkstate(u32 linkstate)
 245 {
 246         char *ret;
 247
 248         switch (linkstate) {
 249         case IPATH_IBSTATE_INIT:
 250                 ret = "Init";
 251                 break;
 252         case IPATH_IBSTATE_ARM:
 253                 ret = "Arm";
 254                 break;
 255         case IPATH_IBSTATE_ACTIVE:
 256                 ret = "Active";
 257                 break;
 258         default:
 259                 ret = "Down";
 260         }
 261
 262         return ret;
 263 }
 264
 265 static void handle_e_ibstatuschanged(struct ipath_devdata *dd,
 266                                      ipath_err_t errs, int noprint)
 267 {
 268         u64 val;
 269         u32 ltstate, lstate;
 270
 271         /*
 272          * even if diags are enabled, we want to notice LINKINIT, etc.
 273          * We just don't want to change the LED state, or
 274          * dd->ipath_kregs->kr_ibcctrl
 275          */
 276         val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus);
 277         lstate = val & IPATH_IBSTATE_MASK;
 278
 279         /*
 280          * this is confusing enough when it happens that I want to always put it
 281          * on the console and in the logs.  If it was a requested state change,
 282          * we'll have already cleared the flags, so we won't print this warning
 283          */
 284         if ((lstate != IPATH_IBSTATE_ARM && lstate != IPATH_IBSTATE_ACTIVE)
 285                 && (dd->ipath_flags & (IPATH_LINKARMED | IPATH_LINKACTIVE))) {
 286                 dev_info(&dd->pcidev->dev, "Link state changed from %s to %s\n",
 287                                  (dd->ipath_flags & IPATH_LINKARMED) ? "ARM" : "ACTIVE",
 288                                  ib_linkstate(lstate));
 289                 /*
 290                  * Flush all queued sends when link went to DOWN or INIT,
 291                  * to be sure that they don't block SMA and other MAD packets
 292                  */
 293                 ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
 294                                  INFINIPATH_S_ABORT);
 295                 ipath_disarm_piobufs(dd, dd->ipath_lastport_piobuf,
 296                                                         (unsigned)(dd->ipath_piobcnt2k +
 297                                         dd->ipath_piobcnt4k) -
 298                                         dd->ipath_lastport_piobuf);
 299         }
 300         else if (lstate == IPATH_IBSTATE_INIT || lstate == IPATH_IBSTATE_ARM ||
 301             lstate == IPATH_IBSTATE_ACTIVE) {
 302                 /*
 303                  * only print at SMA if there is a change, debug if not
 304                  * (sometimes we want to know that, usually not).
 305                  */
 306                 if (lstate == ((unsigned) dd->ipath_lastibcstat
 307                                & IPATH_IBSTATE_MASK)) {
 308                         ipath_dbg("Status change intr but no change (%s)\n",
 309                                   ib_linkstate(lstate));
 310                 }
 311                 else
 312                         ipath_cdbg(VERBOSE, "Unit %u link state %s, last "
 313                                    "was %s\n", dd->ipath_unit,
 314                                    ib_linkstate(lstate),
 315                                    ib_linkstate((unsigned)
 316                                                 dd->ipath_lastibcstat
 317                                                 & IPATH_IBSTATE_MASK));
 318         }
 319         else {
 320                 lstate = dd->ipath_lastibcstat & IPATH_IBSTATE_MASK;
 321                 if (lstate == IPATH_IBSTATE_INIT ||
 322                     lstate == IPATH_IBSTATE_ARM ||
 323                     lstate == IPATH_IBSTATE_ACTIVE)
 324                         ipath_cdbg(VERBOSE, "Unit %u link state down"
 325                                    " (state 0x%x), from %s\n",
 326                                    dd->ipath_unit,
 327                                    (u32)val & IPATH_IBSTATE_MASK,
 328                                    ib_linkstate(lstate));
 329                 else
 330                         ipath_cdbg(VERBOSE, "Unit %u link state changed "
 331                                    "to 0x%x from down (%x)\n",
 332                                    dd->ipath_unit, (u32) val, lstate);
 333         }
 334         ltstate = (val >> INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) &
 335                 INFINIPATH_IBCS_LINKTRAININGSTATE_MASK;
 336         lstate = (val >> INFINIPATH_IBCS_LINKSTATE_SHIFT) &
 337                 INFINIPATH_IBCS_LINKSTATE_MASK;
 338
 339         if (ltstate == INFINIPATH_IBCS_LT_STATE_POLLACTIVE ||
 340             ltstate == INFINIPATH_IBCS_LT_STATE_POLLQUIET) {
 341                 u32 last_ltstate;
 342
 343                 /*
 344                  * Ignore cycling back and forth from Polling.Active
 345                  * to Polling.Quiet while waiting for the other end of
 346                  * the link to come up. We will cycle back and forth
 347                  * between them if no cable is plugged in,
 348                  * the other device is powered off or disabled, etc.
 349                  */
 350                 last_ltstate = (dd->ipath_lastibcstat >>
 351                                 INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT)
 352                         & INFINIPATH_IBCS_LINKTRAININGSTATE_MASK;
 353                 if (last_ltstate == INFINIPATH_IBCS_LT_STATE_POLLACTIVE
 354                     || last_ltstate ==
 355                     INFINIPATH_IBCS_LT_STATE_POLLQUIET) {
 356                         if (dd->ipath_ibpollcnt > 40) {
 357                                 dd->ipath_flags |= IPATH_NOCABLE;
 358                                 *dd->ipath_statusp |=
 359                                         IPATH_STATUS_IB_NOCABLE;
 360                         } else
 361                                 dd->ipath_ibpollcnt++;
 362                         goto skip_ibchange;
 363                 }
 364         }
 365         dd->ipath_ibpollcnt = 0;        /* some state other than 2 or 3 */
 366         ipath_stats.sps_iblink++;
 367         if (ltstate != INFINIPATH_IBCS_LT_STATE_LINKUP) {
 368                 dd->ipath_flags |= IPATH_LINKDOWN;
 369                 dd->ipath_flags &= ~(IPATH_LINKUNK | IPATH_LINKINIT
 370                                      | IPATH_LINKACTIVE |
 371                                      IPATH_LINKARMED);
 372                 *dd->ipath_statusp &= ~IPATH_STATUS_IB_READY;
 373                 dd->ipath_lli_counter = 0;
 374                 if (!noprint) {
 375                         if (((dd->ipath_lastibcstat >>
 376                               INFINIPATH_IBCS_LINKSTATE_SHIFT) &
 377                              INFINIPATH_IBCS_LINKSTATE_MASK)
 378                             == INFINIPATH_IBCS_L_STATE_ACTIVE)
 379                                 /* if from up to down be more vocal */
 380                                 ipath_cdbg(VERBOSE,
 381                                            "Unit %u link now down (%s)\n",
 382                                            dd->ipath_unit,
 383                                            ipath_ibcstatus_str[ltstate]);
 384                         else
 385                                 ipath_cdbg(VERBOSE, "Unit %u link is "
 386                                            "down (%s)\n", dd->ipath_unit,
 387                                            ipath_ibcstatus_str[ltstate]);
 388                 }
 389
 390                 dd->ipath_f_setextled(dd, lstate, ltstate);
 391         } else if ((val & IPATH_IBSTATE_MASK) == IPATH_IBSTATE_ACTIVE) {
 392                 dd->ipath_flags |= IPATH_LINKACTIVE;
 393                 dd->ipath_flags &=
 394                         ~(IPATH_LINKUNK | IPATH_LINKINIT | IPATH_LINKDOWN |
 395                           IPATH_LINKARMED | IPATH_NOCABLE);
 396                 *dd->ipath_statusp &= ~IPATH_STATUS_IB_NOCABLE;
 397                 *dd->ipath_statusp |=
 398                         IPATH_STATUS_IB_READY | IPATH_STATUS_IB_CONF;
 399                 dd->ipath_f_setextled(dd, lstate, ltstate);
 400         } else if ((val & IPATH_IBSTATE_MASK) == IPATH_IBSTATE_INIT) {
 401                 /*
 402                  * set INIT and DOWN.  Down is checked by most of the other
 403                  * code, but INIT is useful to know in a few places.
 404                  */
 405                 dd->ipath_flags |= IPATH_LINKINIT | IPATH_LINKDOWN;
 406                 dd->ipath_flags &=
 407                         ~(IPATH_LINKUNK | IPATH_LINKACTIVE | IPATH_LINKARMED
 408                           | IPATH_NOCABLE);
 409                 *dd->ipath_statusp &= ~(IPATH_STATUS_IB_NOCABLE
 410                                         | IPATH_STATUS_IB_READY);
 411                 dd->ipath_f_setextled(dd, lstate, ltstate);
 412         } else if ((val & IPATH_IBSTATE_MASK) == IPATH_IBSTATE_ARM) {
 413                 dd->ipath_flags |= IPATH_LINKARMED;
 414                 dd->ipath_flags &=
 415                         ~(IPATH_LINKUNK | IPATH_LINKDOWN | IPATH_LINKINIT |
 416                           IPATH_LINKACTIVE | IPATH_NOCABLE);
 417                 *dd->ipath_statusp &= ~(IPATH_STATUS_IB_NOCABLE
 418                                         | IPATH_STATUS_IB_READY);
 419                 dd->ipath_f_setextled(dd, lstate, ltstate);
 420         } else {
 421                 if (!noprint)
 422                         ipath_dbg("IBstatuschange unit %u: %s (%x)\n",
 423                                   dd->ipath_unit,
 424                                   ipath_ibcstatus_str[ltstate], ltstate);
 425         }
 426 skip_ibchange:
 427         dd->ipath_lastibcstat = val;
 428 }
 429
 430 static void handle_supp_msgs(struct ipath_devdata *dd,
 431                              unsigned supp_msgs, char msg[512])
 432 {
 433         /*
 434          * Print the message unless it's ibc status change only, which
 435          * happens so often we never want to count it.
 436          */
 437         if (dd->ipath_lasterror & ~INFINIPATH_E_IBSTATUSCHANGED) {
 438                 int iserr;
 439                 iserr = ipath_decode_err(msg, sizeof msg,
 440                                 dd->ipath_lasterror &
 441                                 ~INFINIPATH_E_IBSTATUSCHANGED);
 442                 if (dd->ipath_lasterror &
 443                         ~(INFINIPATH_E_RRCVEGRFULL |
 444                         INFINIPATH_E_RRCVHDRFULL | INFINIPATH_E_PKTERRS))
 445                         ipath_dev_err(dd, "Suppressed %u messages for "
 446                                       "fast-repeating errors (%s) (%llx)\n",
 447                                       supp_msgs, msg,
 448                                       (unsigned long long)
 449                                       dd->ipath_lasterror);
 450                 else {
 451                         /*
 452                          * rcvegrfull and rcvhdrqfull are "normal", for some
 453                          * types of processes (mostly benchmarks) that send
 454                          * huge numbers of messages, while not processing
 455                          * them. So only complain about these at debug
 456                          * level.
 457                          */
 458                         if (iserr)
 459                                 ipath_dbg("Suppressed %u messages for %s\n",
 460                                           supp_msgs, msg);
 461                         else
 462                                 ipath_cdbg(ERRPKT,
 463                                         "Suppressed %u messages for %s\n",
 464                                           supp_msgs, msg);
 465                 }
 466         }
 467 }
 468
 469 static unsigned handle_frequent_errors(struct ipath_devdata *dd,
 470                                        ipath_err_t errs, char msg[512],
 471                                        int *noprint)
 472 {
 473         unsigned long nc;
 474         static unsigned long nextmsg_time;
 475         static unsigned nmsgs, supp_msgs;
 476
 477         /*
 478          * Throttle back "fast" messages to no more than 10 per 5 seconds.
 479          * This isn't perfect, but it's a reasonable heuristic. If we get
 480          * more than 10, give a 6x longer delay.
 481          */
 482         nc = jiffies;
 483         if (nmsgs > 10) {
 484                 if (time_before(nc, nextmsg_time)) {
 485                         *noprint = 1;
 486                         if (!supp_msgs++)
 487                                 nextmsg_time = nc + HZ * 3;
 488                 }
 489                 else if (supp_msgs) {
 490                         handle_supp_msgs(dd, supp_msgs, msg);
 491                         supp_msgs = 0;
 492                         nmsgs = 0;
 493                 }
 494         }
 495         else if (!nmsgs++ || time_after(nc, nextmsg_time))
 496                 nextmsg_time = nc + HZ / 2;
 497
 498         return supp_msgs;
 499 }
 500
 501 static int handle_errors(struct ipath_devdata *dd, ipath_err_t errs)
 502 {
 503         char msg[512];
 504         u64 ignore_this_time = 0;
 505         int i, iserr = 0;
 506         int chkerrpkts = 0, noprint = 0;
 507         unsigned supp_msgs;
 508
 509         supp_msgs = handle_frequent_errors(dd, errs, msg, &noprint);
 510
 511         /*
 512          * don't report errors that are masked (includes those always
 513          * ignored)
 514          */
 515         errs &= ~dd->ipath_maskederrs;
 516
 517         /* do these first, they are most important */
 518         if (errs & INFINIPATH_E_HARDWARE) {
 519                 /* reuse same msg buf */
 520                 dd->ipath_f_handle_hwerrors(dd, msg, sizeof msg);
 521         }
 522
 523         if (!noprint && (errs & ~dd->ipath_e_bitsextant))
 524                 ipath_dev_err(dd, "error interrupt with unknown errors "
 525                               "%llx set\n", (unsigned long long)
 526                               (errs & ~dd->ipath_e_bitsextant));
 527
 528         if (errs & E_SUM_ERRS)
 529                 ignore_this_time = handle_e_sum_errs(dd, errs);
 530         else if ((errs & E_SUM_LINK_PKTERRS) &&
 531             !(dd->ipath_flags & IPATH_LINKACTIVE)) {
 532                 /*
 533                  * This can happen when SMA is trying to bring the link
 534                  * up, but the IB link changes state at the "wrong" time.
 535                  * The IB logic then complains that the packet isn't
 536                  * valid.  We don't want to confuse people, so we just
 537                  * don't print them, except at debug
 538                  */
 539                 ipath_dbg("Ignoring packet errors %llx, because link not "
 540                           "ACTIVE\n", (unsigned long long) errs);
 541                 ignore_this_time = errs & E_SUM_LINK_PKTERRS;
 542         }
 543
 544         if (supp_msgs == 250000) {
 545                 int s_iserr;
 546                 /*
 547                  * It's not entirely reasonable assuming that the errors set
 548                  * in the last clear period are all responsible for the
 549                  * problem, but the alternative is to assume it's the only
 550                  * ones on this particular interrupt, which also isn't great
 551                  */
 552                 dd->ipath_maskederrs |= dd->ipath_lasterror | errs;
 553                 ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask,
 554                                  ~dd->ipath_maskederrs);
 555                 s_iserr = ipath_decode_err(msg, sizeof msg,
 556                                  (dd->ipath_maskederrs & ~dd->
 557                                   ipath_ignorederrs));
 558
 559                 if ((dd->ipath_maskederrs & ~dd->ipath_ignorederrs) &
 560                         ~(INFINIPATH_E_RRCVEGRFULL |
 561                         INFINIPATH_E_RRCVHDRFULL | INFINIPATH_E_PKTERRS))
 562                         ipath_dev_err(dd, "Temporarily disabling "
 563                             "error(s) %llx reporting; too frequent (%s)\n",
 564                                 (unsigned long long) (dd->ipath_maskederrs &
 565                                 ~dd->ipath_ignorederrs), msg);
 566                 else {
 567                         /*
 568                          * rcvegrfull and rcvhdrqfull are "normal",
 569                          * for some types of processes (mostly benchmarks)
 570                          * that send huge numbers of messages, while not
 571                          * processing them.  So only complain about
 572                          * these at debug level.
 573                          */
 574                         if (s_iserr)
 575                                 ipath_dbg("Temporarily disabling reporting "
 576                                     "too frequent queue full errors (%s)\n",
 577                                     msg);
 578                         else
 579                                 ipath_cdbg(ERRPKT,
 580                                     "Temporarily disabling reporting too"
 581                                     " frequent packet errors (%s)\n",
 582                                     msg);
 583                 }
 584
 585                 /*
 586                  * Re-enable the masked errors after around 3 minutes.  in
 587                  * ipath_get_faststats().  If we have a series of fast
 588                  * repeating but different errors, the interval will keep
 589                  * stretching out, but that's OK, as that's pretty
 590                  * catastrophic.
 591                  */
 592                 dd->ipath_unmasktime = jiffies + HZ * 180;
 593         }
 594
 595         ipath_write_kreg(dd, dd->ipath_kregs->kr_errorclear, errs);
 596         if (ignore_this_time)
 597                 errs &= ~ignore_this_time;
 598         if (errs & ~dd->ipath_lasterror) {
 599                 errs &= ~dd->ipath_lasterror;
 600                 /* never suppress duplicate hwerrors or ibstatuschange */
 601                 dd->ipath_lasterror |= errs &
 602                         ~(INFINIPATH_E_HARDWARE |
 603                           INFINIPATH_E_IBSTATUSCHANGED);
 604         }
 605
 606         /* likely due to cancel, so suppress */
 607         if ((errs & (INFINIPATH_E_SPKTLEN | INFINIPATH_E_SPIOARMLAUNCH)) &&
 608                 dd->ipath_lastcancel > jiffies) {
 609                 ipath_dbg("Suppressed armlaunch/spktlen after error send cancel\n");
 610                 errs &= ~(INFINIPATH_E_SPIOARMLAUNCH | INFINIPATH_E_SPKTLEN);
 611         }
 612
 613         if (!errs)
 614                 return 0;
 615
 616         if (!noprint)
 617                 /*
 618                  * the ones we mask off are handled specially below or above
 619                  */
 620                 ipath_decode_err(msg, sizeof msg,
 621                                  errs & ~(INFINIPATH_E_IBSTATUSCHANGED |
 622                                           INFINIPATH_E_RRCVEGRFULL |
 623                                           INFINIPATH_E_RRCVHDRFULL |
 624                                           INFINIPATH_E_HARDWARE));
 625         else
 626                 /* so we don't need if (!noprint) at strlcat's below */
 627                 *msg = 0;
 628
 629         if (errs & E_SUM_PKTERRS) {
 630                 ipath_stats.sps_pkterrs++;
 631                 chkerrpkts = 1;
 632         }
 633         if (errs & E_SUM_ERRS)
 634                 ipath_stats.sps_errs++;
 635
 636         if (errs & (INFINIPATH_E_RICRC | INFINIPATH_E_RVCRC)) {
 637                 ipath_stats.sps_crcerrs++;
 638                 chkerrpkts = 1;
 639         }
 640         iserr = errs & ~(E_SUM_PKTERRS | INFINIPATH_E_PKTERRS);
 641
 642
 643         /*
 644          * We don't want to print these two as they happen, or we can make
 645          * the situation even worse, because it takes so long to print
 646          * messages to serial consoles.  Kernel ports get printed from
 647          * fast_stats, no more than every 5 seconds, user ports get printed
 648          * on close
 649          */
 650         if (errs & INFINIPATH_E_RRCVHDRFULL) {
 651                 u32 hd, tl;
 652                 ipath_stats.sps_hdrqfull++;
 653                 for (i = 0; i < dd->ipath_cfgports; i++) {
 654                         struct ipath_portdata *pd = dd->ipath_pd[i];
 655                         if (i == 0) {
 656                                 hd = dd->ipath_port0head;
 657                                 tl = (u32) le64_to_cpu(
 658                                         *dd->ipath_hdrqtailptr);
 659                         } else if (pd && pd->port_cnt &&
 660                                    pd->port_rcvhdrtail_kvaddr) {
 661                                 /*
 662                                  * don't report same point multiple times,
 663                                  * except kernel
 664                                  */
 665                                 tl = *(u64 *) pd->port_rcvhdrtail_kvaddr;
 666                                 if (tl == dd->ipath_lastrcvhdrqtails[i])
 667                                         continue;
 668                                 hd = ipath_read_ureg32(dd, ur_rcvhdrhead,
 669                                                        i);
 670                         } else
 671                                 continue;
 672                         if (hd == (tl + 1) ||
 673                             (!hd && tl == dd->ipath_hdrqlast)) {
 674                                 if (i == 0)
 675                                         chkerrpkts = 1;
 676                                 dd->ipath_lastrcvhdrqtails[i] = tl;
 677                                 pd->port_hdrqfull++;
 678                         }
 679                 }
 680         }
 681         if (errs & INFINIPATH_E_RRCVEGRFULL) {
 682                 /*
 683                  * since this is of less importance and not likely to
 684                  * happen without also getting hdrfull, only count
 685                  * occurrences; don't check each port (or even the kernel
 686                  * vs user)
 687                  */
 688                 ipath_stats.sps_etidfull++;
 689                 if (dd->ipath_port0head !=
 690                     (u32) le64_to_cpu(*dd->ipath_hdrqtailptr))
 691                         chkerrpkts = 1;
 692         }
 693
 694         /*
 695          * do this before IBSTATUSCHANGED, in case both bits set in a single
 696          * interrupt; we want the STATUSCHANGE to "win", so we do our
 697          * internal copy of state machine correctly
 698          */
 699         if (errs & INFINIPATH_E_RIBLOSTLINK) {
 700                 /*
 701                  * force through block below
 702                  */
 703                 errs |= INFINIPATH_E_IBSTATUSCHANGED;
 704                 ipath_stats.sps_iblink++;
 705                 dd->ipath_flags |= IPATH_LINKDOWN;
 706                 dd->ipath_flags &= ~(IPATH_LINKUNK | IPATH_LINKINIT
 707                                      | IPATH_LINKARMED | IPATH_LINKACTIVE);
 708                 *dd->ipath_statusp &= ~IPATH_STATUS_IB_READY;
 709                 if (!noprint) {
 710                         u64 st = ipath_read_kreg64(
 711                                 dd, dd->ipath_kregs->kr_ibcstatus);
 712
 713                         ipath_dbg("Lost link, link now down (%s)\n",
 714                                   ipath_ibcstatus_str[st & 0xf]);
 715                 }
 716         }
 717         if (errs & INFINIPATH_E_IBSTATUSCHANGED)
 718                 handle_e_ibstatuschanged(dd, errs, noprint);
 719
 720         if (errs & INFINIPATH_E_RESET) {
 721                 if (!noprint)
 722                         ipath_dev_err(dd, "Got reset, requires re-init "
 723                                       "(unload and reload driver)\n");
 724                 dd->ipath_flags &= ~IPATH_INITTED;      /* needs re-init */
 725                 /* mark as having had error */
 726                 *dd->ipath_statusp |= IPATH_STATUS_HWERROR;
 727                 *dd->ipath_statusp &= ~IPATH_STATUS_IB_CONF;
 728         }
 729
 730         if (!noprint && *msg) {
 731                 if (iserr)
 732                         ipath_dev_err(dd, "%s error\n", msg);
 733                 else
 734                         dev_info(&dd->pcidev->dev, "%s packet problems\n",
 735                                 msg);
 736         }
 737         if (dd->ipath_state_wanted & dd->ipath_flags) {
 738                 ipath_cdbg(VERBOSE, "driver wanted state %x, iflags now %x, "
 739                            "waking\n", dd->ipath_state_wanted,
 740                            dd->ipath_flags);
 741                 wake_up_interruptible(&ipath_state_wait);
 742         }
 743
 744         return chkerrpkts;
 745 }
 746
 747 /* this is separate to allow for better optimization of ipath_intr() */
 748
 749 static void ipath_bad_intr(struct ipath_devdata *dd, u32 * unexpectp)
 750 {
 751         /*
 752          * sometimes happen during driver init and unload, don't want
 753          * to process any interrupts at that point
 754          */
 755
 756         /* this is just a bandaid, not a fix, if something goes badly
 757          * wrong */
 758         if (++*unexpectp > 100) {
 759                 if (++*unexpectp > 105) {
 760                         /*
 761                          * ok, we must be taking somebody else's interrupts,
 762                          * due to a messed up mptable and/or PIRQ table, so
 763                          * unregister the interrupt.  We've seen this during
 764                          * linuxbios development work, and it may happen in
 765                          * the future again.
 766                          */
 767                         if (dd->pcidev && dd->ipath_irq) {
 768                                 ipath_dev_err(dd, "Now %u unexpected "
 769                                               "interrupts, unregistering "
 770                                               "interrupt handler\n",
 771                                               *unexpectp);
 772                                 ipath_dbg("free_irq of irq %d\n",
 773                                           dd->ipath_irq);
 774                                 dd->ipath_f_free_irq(dd);
 775                         }
 776                 }
 777                 if (ipath_read_kreg32(dd, dd->ipath_kregs->kr_intmask)) {
 778                         ipath_dev_err(dd, "%u unexpected interrupts, "
 779                                       "disabling interrupts completely\n",
 780                                       *unexpectp);
 781                         /*
 782                          * disable all interrupts, something is very wrong
 783                          */
 784                         ipath_write_kreg(dd, dd->ipath_kregs->kr_intmask,
 785                                          0ULL);
 786                 }
 787         } else if (*unexpectp > 1)
 788                 ipath_dbg("Interrupt when not ready, should not happen, "
 789                           "ignoring\n");
 790 }
 791
 792 static void ipath_bad_regread(struct ipath_devdata *dd)
 793 {
 794         static int allbits;
 795
 796         /* separate routine, for better optimization of ipath_intr() */
 797
 798         /*
 799          * We print the message and disable interrupts, in hope of
 800          * having a better chance of debugging the problem.
 801          */
 802         ipath_dev_err(dd,
 803                       "Read of interrupt status failed (all bits set)\n");
 804         if (allbits++) {
 805                 /* disable all interrupts, something is very wrong */
 806                 ipath_write_kreg(dd, dd->ipath_kregs->kr_intmask, 0ULL);
 807                 if (allbits == 2) {
 808                         ipath_dev_err(dd, "Still bad interrupt status, "
 809                                       "unregistering interrupt\n");
 810                         dd->ipath_f_free_irq(dd);
 811                 } else if (allbits > 2) {
 812                         if ((allbits % 10000) == 0)
 813                                 printk(".");
 814                 } else
 815                         ipath_dev_err(dd, "Disabling interrupts, "
 816                                       "multiple errors\n");
 817         }
 818 }
 819
 820 static void handle_port_pioavail(struct ipath_devdata *dd)
 821 {
 822         u32 i;
 823         /*
 824          * start from port 1, since for now port 0  is never using
 825          * wait_event for PIO
 826          */
 827         for (i = 1; dd->ipath_portpiowait && i < dd->ipath_cfgports; i++) {
 828                 struct ipath_portdata *pd = dd->ipath_pd[i];
 829
 830                 if (pd && pd->port_cnt &&
 831                     dd->ipath_portpiowait & (1U << i)) {
 832                         clear_bit(i, &dd->ipath_portpiowait);
 833                         if (test_bit(IPATH_PORT_WAITING_PIO,
 834                                      &pd->port_flag)) {
 835                                 clear_bit(IPATH_PORT_WAITING_PIO,
 836                                           &pd->port_flag);
 837                                 wake_up_interruptible(&pd->port_wait);
 838                         }
 839                 }
 840         }
 841 }
 842
 843 static void handle_layer_pioavail(struct ipath_devdata *dd)
 844 {
 845         int ret;
 846
 847         ret = ipath_ib_piobufavail(dd->verbs_dev);
 848         if (ret > 0)
 849                 goto set;
 850
 851         return;
 852 set:
 853         set_bit(IPATH_S_PIOINTBUFAVAIL, &dd->ipath_sendctrl);
 854         ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
 855                          dd->ipath_sendctrl);
 856 }
 857
 858 /*
 859  * Handle receive interrupts for user ports; this means a user
 860  * process was waiting for a packet to arrive, and didn't want
 861  * to poll
 862  */
 863 static void handle_urcv(struct ipath_devdata *dd, u32 istat)
 864 {
 865         u64 portr;
 866         int i;
 867         int rcvdint = 0;
 868
 869         portr = ((istat >> INFINIPATH_I_RCVAVAIL_SHIFT) &
 870                  dd->ipath_i_rcvavail_mask)
 871                 | ((istat >> INFINIPATH_I_RCVURG_SHIFT) &
 872                    dd->ipath_i_rcvurg_mask);
 873         for (i = 1; i < dd->ipath_cfgports; i++) {
 874                 struct ipath_portdata *pd = dd->ipath_pd[i];
 875                 if (portr & (1 << i) && pd && pd->port_cnt &&
 876                         test_bit(IPATH_PORT_WAITING_RCV, &pd->port_flag)) {
 877                         clear_bit(IPATH_PORT_WAITING_RCV,
 878                                   &pd->port_flag);
 879                         clear_bit(i + INFINIPATH_R_INTRAVAIL_SHIFT,
 880                                   &dd->ipath_rcvctrl);
 881                         wake_up_interruptible(&pd->port_wait);
 882                         rcvdint = 1;
 883                 }
 884         }
 885         if (rcvdint) {
 886                 /* only want to take one interrupt, so turn off the rcv
 887                  * interrupt for all the ports that we did the wakeup on
 888                  * (but never for kernel port)
 889                  */
 890                 ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
 891                                  dd->ipath_rcvctrl);
 892         }
 893 }
 894
 895 irqreturn_t ipath_intr(int irq, void *data)
 896 {
 897         struct ipath_devdata *dd = data;
 898         u32 istat, chk0rcv = 0;
 899         ipath_err_t estat = 0;
 900         irqreturn_t ret;
 901         u32 oldhead, curtail;
 902         static unsigned unexpected = 0;
 903         static const u32 port0rbits = (1U<<INFINIPATH_I_RCVAVAIL_SHIFT) |
 904                  (1U<<INFINIPATH_I_RCVURG_SHIFT);
 905
 906         ipath_stats.sps_ints++;
 907
 908         if (!(dd->ipath_flags & IPATH_PRESENT)) {
 909                 /*
 910                  * This return value is not great, but we do not want the
 911                  * interrupt core code to remove our interrupt handler
 912                  * because we don't appear to be handling an interrupt
 913                  * during a chip reset.
 914                  */
 915                 return IRQ_HANDLED;
 916         }
 917
 918         /*
 919          * this needs to be flags&initted, not statusp, so we keep
 920          * taking interrupts even after link goes down, etc.
 921          * Also, we *must* clear the interrupt at some point, or we won't
 922          * take it again, which can be real bad for errors, etc...
 923          */
 924
 925         if (!(dd->ipath_flags & IPATH_INITTED)) {
 926                 ipath_bad_intr(dd, &unexpected);
 927                 ret = IRQ_NONE;
 928                 goto bail;
 929         }
 930
 931         /*
 932          * We try to avoid reading the interrupt status register, since
 933          * that's a PIO read, and stalls the processor for up to about
 934          * ~0.25 usec. The idea is that if we processed a port0 packet,
 935          * we blindly clear the  port 0 receive interrupt bits, and nothing
 936          * else, then return.  If other interrupts are pending, the chip
 937          * will re-interrupt us as soon as we write the intclear register.
 938          * We then won't process any more kernel packets (if not the 2nd
 939          * time, then the 3rd or 4th) and we'll then handle the other
 940          * interrupts.   We clear the interrupts first so that we don't
 941          * lose intr for later packets that arrive while we are processing.
 942          */
 943         oldhead = dd->ipath_port0head;
 944         curtail = (u32)le64_to_cpu(*dd->ipath_hdrqtailptr);
 945         if (oldhead != curtail) {
 946                 if (dd->ipath_flags & IPATH_GPIO_INTR) {
 947                         ipath_write_kreg(dd, dd->ipath_kregs->kr_gpio_clear,
 948                                          (u64) (1 << IPATH_GPIO_PORT0_BIT));
 949                         istat = port0rbits | INFINIPATH_I_GPIO;
 950                 }
 951                 else
 952                         istat = port0rbits;
 953                 ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, istat);
 954                 ipath_kreceive(dd);
 955                 if (oldhead != dd->ipath_port0head) {
 956                         ipath_stats.sps_fastrcvint++;
 957                         goto done;
 958                 }
 959         }
 960
 961         istat = ipath_read_kreg32(dd, dd->ipath_kregs->kr_intstatus);
 962
 963         if (unlikely(!istat)) {
 964                 ipath_stats.sps_nullintr++;
 965                 ret = IRQ_NONE; /* not our interrupt, or already handled */
 966                 goto bail;
 967         }
 968         if (unlikely(istat == -1)) {
 969                 ipath_bad_regread(dd);
 970                 /* don't know if it was our interrupt or not */
 971                 ret = IRQ_NONE;
 972                 goto bail;
 973         }
 974
 975         if (unexpected)
 976                 unexpected = 0;
 977
 978         if (unlikely(istat & ~dd->ipath_i_bitsextant))
 979                 ipath_dev_err(dd,
 980                               "interrupt with unknown interrupts %x set\n",
 981                               istat & (u32) ~ dd->ipath_i_bitsextant);
 982         else
 983                 ipath_cdbg(VERBOSE, "intr stat=0x%x\n", istat);
 984
 985         if (unlikely(istat & INFINIPATH_I_ERROR)) {
 986                 ipath_stats.sps_errints++;
 987                 estat = ipath_read_kreg64(dd,
 988                                           dd->ipath_kregs->kr_errorstatus);
 989                 if (!estat)
 990                         dev_info(&dd->pcidev->dev, "error interrupt (%x), "
 991                                  "but no error bits set!\n", istat);
 992                 else if (estat == -1LL)
 993                         /*
 994                          * should we try clearing all, or hope next read
 995                          * works?
 996                          */
 997                         ipath_dev_err(dd, "Read of error status failed "
 998                                       "(all bits set); ignoring\n");
 999                 else
1000                         if (handle_errors(dd, estat))
1001                                 /* force calling ipath_kreceive() */
1002                                 chk0rcv = 1;
1003         }
1004
1005         if (istat & INFINIPATH_I_GPIO) {
1006                 /*
1007                  * GPIO interrupts fall in two broad classes:
1008                  * GPIO_2 indicates (on some HT4xx boards) that a packet
1009                  *        has arrived for Port 0. Checking for this
1010                  *        is controlled by flag IPATH_GPIO_INTR.
1011                  * GPIO_3..5 on IBA6120 Rev2 chips indicate errors
1012                  *        that we need to count. Checking for this
1013                  *        is controlled by flag IPATH_GPIO_ERRINTRS.
1014                  */
1015                 u32 gpiostatus;
1016                 u32 to_clear = 0;
1017
1018                 gpiostatus = ipath_read_kreg32(
1019                         dd, dd->ipath_kregs->kr_gpio_status);
1020                 /* First the error-counter case.
1021                  */
1022                 if ((gpiostatus & IPATH_GPIO_ERRINTR_MASK) &&
1023                     (dd->ipath_flags & IPATH_GPIO_ERRINTRS)) {
1024                         /* want to clear the bits we see asserted. */
1025                         to_clear |= (gpiostatus & IPATH_GPIO_ERRINTR_MASK);
1026
1027                         /*
1028                          * Count appropriately, clear bits out of our copy,
1029                          * as they have been "handled".
1030                          */
1031                         if (gpiostatus & (1 << IPATH_GPIO_RXUVL_BIT)) {
1032                                 ipath_dbg("FlowCtl on UnsupVL\n");
1033                                 dd->ipath_rxfc_unsupvl_errs++;
1034                         }
1035                         if (gpiostatus & (1 << IPATH_GPIO_OVRUN_BIT)) {
1036                                 ipath_dbg("Overrun Threshold exceeded\n");
1037                                 dd->ipath_overrun_thresh_errs++;
1038                         }
1039                         if (gpiostatus & (1 << IPATH_GPIO_LLI_BIT)) {
1040                                 ipath_dbg("Local Link Integrity error\n");
1041                                 dd->ipath_lli_errs++;
1042                         }
1043                         gpiostatus &= ~IPATH_GPIO_ERRINTR_MASK;
1044                 }
1045                 /* Now the Port0 Receive case */
1046                 if ((gpiostatus & (1 << IPATH_GPIO_PORT0_BIT)) &&
1047                     (dd->ipath_flags & IPATH_GPIO_INTR)) {
1048                         /*
1049                          * GPIO status bit 2 is set, and we expected it.
1050                          * clear it and indicate in p0bits.
1051                          * This probably only happens if a Port0 pkt
1052                          * arrives at _just_ the wrong time, and we
1053                          * handle that by seting chk0rcv;
1054                          */
1055                         to_clear |= (1 << IPATH_GPIO_PORT0_BIT);
1056                         gpiostatus &= ~(1 << IPATH_GPIO_PORT0_BIT);
1057                         chk0rcv = 1;
1058                 }
1059                 if (gpiostatus) {
1060                         /*
1061                          * Some unexpected bits remain. If they could have
1062                          * caused the interrupt, complain and clear.
1063                          * MEA: this is almost certainly non-ideal.
1064                          * we should look into auto-disable of unexpected
1065                          * GPIO interrupts, possibly on a "three strikes"
1066                          * basis.
1067                          */
1068                         const u32 mask = (u32) dd->ipath_gpio_mask;
1069
1070                         if (mask & gpiostatus) {
1071                                 ipath_dbg("Unexpected GPIO IRQ bits %x\n",
1072                                   gpiostatus & mask);
1073                                 to_clear |= (gpiostatus & mask);
1074                         }
1075                 }
1076                 if (to_clear) {
1077                         ipath_write_kreg(dd, dd->ipath_kregs->kr_gpio_clear,
1078                                         (u64) to_clear);
1079                 }
1080         }
1081         chk0rcv |= istat & port0rbits;
1082
1083         /*
1084          * Clear the interrupt bits we found set, unless they are receive
1085          * related, in which case we already cleared them above, and don't
1086          * want to clear them again, because we might lose an interrupt.
1087          * Clear it early, so we "know" know the chip will have seen this by
1088          * the time we process the queue, and will re-interrupt if necessary.
1089          * The processor itself won't take the interrupt again until we return.
1090          */
1091         ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, istat);
1092
1093         /*
1094          * handle port0 receive  before checking for pio buffers available,
1095          * since receives can overflow; piobuf waiters can afford a few
1096          * extra cycles, since they were waiting anyway, and user's waiting
1097          * for receive are at the bottom.
1098          */
1099         if (chk0rcv) {
1100                 ipath_kreceive(dd);
1101                 istat &= ~port0rbits;
1102         }
1103
1104         if (istat & ((dd->ipath_i_rcvavail_mask <<
1105                       INFINIPATH_I_RCVAVAIL_SHIFT)
1106                      | (dd->ipath_i_rcvurg_mask <<
1107                         INFINIPATH_I_RCVURG_SHIFT)))
1108                 handle_urcv(dd, istat);
1109
1110         if (istat & INFINIPATH_I_SPIOBUFAVAIL) {
1111                 clear_bit(IPATH_S_PIOINTBUFAVAIL, &dd->ipath_sendctrl);
1112                 ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
1113                                  dd->ipath_sendctrl);
1114
1115                 if (dd->ipath_portpiowait)
1116                         handle_port_pioavail(dd);
1117
1118                 handle_layer_pioavail(dd);
1119         }
1120
1121 done:
1122         ret = IRQ_HANDLED;
1123
1124 bail:
1125         return ret;
1126 }