drivers/ieee1394/pcilynx.c

   1 /*
   2  * pcilynx.c - Texas Instruments PCILynx driver
   3  * Copyright (C) 1999,2000 Andreas Bombe <andreas.bombe@munich.netsurf.de>,
   4  *                         Stephan Linz <linz@mazet.de>
   5  *                         Manfred Weihs <weihs@ict.tuwien.ac.at>
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License as published by
   9  * the Free Software Foundation; either version 2 of the License, or
  10  * (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software Foundation,
  19  * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  20  */
  21
  22 /*
  23  * Contributions:
  24  *
  25  * Manfred Weihs <weihs@ict.tuwien.ac.at>
  26  *        reading bus info block (containing GUID) from serial
  27  *            eeprom via i2c and storing it in config ROM
  28  *        Reworked code for initiating bus resets
  29  *            (long, short, with or without hold-off)
  30  *        Enhancements in async and iso send code
  31  */
  32
  33 #include <linux/kernel.h>
  34 #include <linux/slab.h>
  35 #include <linux/interrupt.h>
  36 #include <linux/wait.h>
  37 #include <linux/errno.h>
  38 #include <linux/module.h>
  39 #include <linux/moduleparam.h>
  40 #include <linux/init.h>
  41 #include <linux/pci.h>
  42 #include <linux/fs.h>
  43 #include <linux/poll.h>
  44 #include <linux/kdev_t.h>
  45 #include <linux/dma-mapping.h>
  46 #include <asm/byteorder.h>
  47 #include <asm/atomic.h>
  48 #include <asm/io.h>
  49 #include <asm/uaccess.h>
  50 #include <asm/irq.h>
  51
  52 #include "csr1212.h"
  53 #include "ieee1394.h"
  54 #include "ieee1394_types.h"
  55 #include "hosts.h"
  56 #include "ieee1394_core.h"
  57 #include "highlevel.h"
  58 #include "pcilynx.h"
  59
  60 #include <linux/i2c.h>
  61 #include <linux/i2c-algo-bit.h>
  62
  63 /* print general (card independent) information */
  64 #define PRINT_G(level, fmt, args...) printk(level "pcilynx: " fmt "\n" , ## args)
  65 /* print card specific information */
  66 #define PRINT(level, card, fmt, args...) printk(level "pcilynx%d: " fmt "\n" , card , ## args)
  67
  68 #ifdef CONFIG_IEEE1394_VERBOSEDEBUG
  69 #define PRINT_GD(level, fmt, args...) printk(level "pcilynx: " fmt "\n" , ## args)
  70 #define PRINTD(level, card, fmt, args...) printk(level "pcilynx%d: " fmt "\n" , card , ## args)
  71 #else
  72 #define PRINT_GD(level, fmt, args...) do {} while (0)
  73 #define PRINTD(level, card, fmt, args...) do {} while (0)
  74 #endif
  75
  76
  77 /* Module Parameters */
  78 static int skip_eeprom;
  79 module_param(skip_eeprom, int, 0444);
  80 MODULE_PARM_DESC(skip_eeprom, "Use generic bus info block instead of serial eeprom (default = 0).");
  81
  82
  83 static struct hpsb_host_driver lynx_driver;
  84 static unsigned int card_id;
  85
  86
  87
  88 /*
  89  * I2C stuff
  90  */
  91
  92 /* the i2c stuff was inspired by i2c-philips-par.c */
  93
  94 static void bit_setscl(void *data, int state)
  95 {
  96         if (state) {
  97                   ((struct ti_lynx *) data)->i2c_driven_state |= 0x00000040;
  98         } else {
  99                   ((struct ti_lynx *) data)->i2c_driven_state &= ~0x00000040;
 100         }
 101         reg_write((struct ti_lynx *) data, SERIAL_EEPROM_CONTROL, ((struct ti_lynx *) data)->i2c_driven_state);
 102 }
 103
 104 static void bit_setsda(void *data, int state)
 105 {
 106         if (state) {
 107                   ((struct ti_lynx *) data)->i2c_driven_state |= 0x00000010;
 108         } else {
 109                   ((struct ti_lynx *) data)->i2c_driven_state &= ~0x00000010;
 110         }
 111         reg_write((struct ti_lynx *) data, SERIAL_EEPROM_CONTROL, ((struct ti_lynx *) data)->i2c_driven_state);
 112 }
 113
 114 static int bit_getscl(void *data)
 115 {
 116         return reg_read((struct ti_lynx *) data, SERIAL_EEPROM_CONTROL) & 0x00000040;
 117 }
 118
 119 static int bit_getsda(void *data)
 120 {
 121         return reg_read((struct ti_lynx *) data, SERIAL_EEPROM_CONTROL) & 0x00000010;
 122 }
 123
 124 static struct i2c_algo_bit_data bit_data = {
 125         .setsda                 = bit_setsda,
 126         .setscl                 = bit_setscl,
 127         .getsda                 = bit_getsda,
 128         .getscl                 = bit_getscl,
 129         .udelay                 = 5,
 130         .timeout                = 100,
 131 };
 132
 133
 134 /*
 135  * PCL handling functions.
 136  */
 137
 138 static pcl_t alloc_pcl(struct ti_lynx *lynx)
 139 {
 140         u8 m;
 141         int i, j;
 142
 143         spin_lock(&lynx->lock);
 144         /* FIXME - use ffz() to make this readable */
 145         for (i = 0; i < (LOCALRAM_SIZE / 1024); i++) {
 146                 m = lynx->pcl_bmap[i];
 147                 for (j = 0; j < 8; j++) {
 148                         if (m & 1<<j) {
 149                                 continue;
 150                         }
 151                         m |= 1<<j;
 152                         lynx->pcl_bmap[i] = m;
 153                         spin_unlock(&lynx->lock);
 154                         return 8 * i + j;
 155                 }
 156         }
 157         spin_unlock(&lynx->lock);
 158
 159         return -1;
 160 }
 161
 162
 163 #if 0
 164 static void free_pcl(struct ti_lynx *lynx, pcl_t pclid)
 165 {
 166         int off, bit;
 167
 168         off = pclid / 8;
 169         bit = pclid % 8;
 170
 171         if (pclid < 0) {
 172                 return;
 173         }
 174
 175         spin_lock(&lynx->lock);
 176         if (lynx->pcl_bmap[off] & 1<<bit) {
 177                 lynx->pcl_bmap[off] &= ~(1<<bit);
 178         } else {
 179                 PRINT(KERN_ERR, lynx->id,
 180                       "attempted to free unallocated PCL %d", pclid);
 181         }
 182         spin_unlock(&lynx->lock);
 183 }
 184
 185 /* functions useful for debugging */
 186 static void pretty_print_pcl(const struct ti_pcl *pcl)
 187 {
 188         int i;
 189
 190         printk("PCL next %08x, userdata %08x, status %08x, remtrans %08x, nextbuf %08x\n",
 191                pcl->next, pcl->user_data, pcl->pcl_status,
 192                pcl->remaining_transfer_count, pcl->next_data_buffer);
 193
 194         printk("PCL");
 195         for (i=0; i<13; i++) {
 196                 printk(" c%x:%08x d%x:%08x",
 197                        i, pcl->buffer[i].control, i, pcl->buffer[i].pointer);
 198                 if (!(i & 0x3) && (i != 12)) printk("\nPCL");
 199         }
 200         printk("\n");
 201 }
 202
 203 static void print_pcl(const struct ti_lynx *lynx, pcl_t pclid)
 204 {
 205         struct ti_pcl pcl;
 206
 207         get_pcl(lynx, pclid, &pcl);
 208         pretty_print_pcl(&pcl);
 209 }
 210 #endif
 211
 212
 213
 214 /***********************************
 215  * IEEE-1394 functionality section *
 216  ***********************************/
 217
 218
 219 static int get_phy_reg(struct ti_lynx *lynx, int addr)
 220 {
 221         int retval;
 222         int i = 0;
 223
 224         unsigned long flags;
 225
 226         if (addr > 15) {
 227                 PRINT(KERN_ERR, lynx->id,
 228                       "%s: PHY register address %d out of range",
 229                       __func__, addr);
 230                 return -1;
 231         }
 232
 233         spin_lock_irqsave(&lynx->phy_reg_lock, flags);
 234
 235         reg_write(lynx, LINK_PHY, LINK_PHY_READ | LINK_PHY_ADDR(addr));
 236         do {
 237                 retval = reg_read(lynx, LINK_PHY);
 238
 239                 if (i > 10000) {
 240                         PRINT(KERN_ERR, lynx->id, "%s: runaway loop, aborting",
 241                               __func__);
 242                         retval = -1;
 243                         break;
 244                 }
 245                 i++;
 246         } while ((retval & 0xf00) != LINK_PHY_RADDR(addr));
 247
 248         reg_write(lynx, LINK_INT_STATUS, LINK_INT_PHY_REG_RCVD);
 249         spin_unlock_irqrestore(&lynx->phy_reg_lock, flags);
 250
 251         if (retval != -1) {
 252                 return retval & 0xff;
 253         } else {
 254                 return -1;
 255         }
 256 }
 257
 258 static int set_phy_reg(struct ti_lynx *lynx, int addr, int val)
 259 {
 260         unsigned long flags;
 261
 262         if (addr > 15) {
 263                 PRINT(KERN_ERR, lynx->id,
 264                       "%s: PHY register address %d out of range", __func__, addr);
 265                 return -1;
 266         }
 267
 268         if (val > 0xff) {
 269                 PRINT(KERN_ERR, lynx->id,
 270                       "%s: PHY register value %d out of range", __func__, val);
 271                 return -1;
 272         }
 273
 274         spin_lock_irqsave(&lynx->phy_reg_lock, flags);
 275
 276         reg_write(lynx, LINK_PHY, LINK_PHY_WRITE | LINK_PHY_ADDR(addr)
 277                   | LINK_PHY_WDATA(val));
 278
 279         spin_unlock_irqrestore(&lynx->phy_reg_lock, flags);
 280
 281         return 0;
 282 }
 283
 284 static int sel_phy_reg_page(struct ti_lynx *lynx, int page)
 285 {
 286         int reg;
 287
 288         if (page > 7) {
 289                 PRINT(KERN_ERR, lynx->id,
 290                       "%s: PHY page %d out of range", __func__, page);
 291                 return -1;
 292         }
 293
 294         reg = get_phy_reg(lynx, 7);
 295         if (reg != -1) {
 296                 reg &= 0x1f;
 297                 reg |= (page << 5);
 298                 set_phy_reg(lynx, 7, reg);
 299                 return 0;
 300         } else {
 301                 return -1;
 302         }
 303 }
 304
 305 #if 0 /* not needed at this time */
 306 static int sel_phy_reg_port(struct ti_lynx *lynx, int port)
 307 {
 308         int reg;
 309
 310         if (port > 15) {
 311                 PRINT(KERN_ERR, lynx->id,
 312                       "%s: PHY port %d out of range", __func__, port);
 313                 return -1;
 314         }
 315
 316         reg = get_phy_reg(lynx, 7);
 317         if (reg != -1) {
 318                 reg &= 0xf0;
 319                 reg |= port;
 320                 set_phy_reg(lynx, 7, reg);
 321                 return 0;
 322         } else {
 323                 return -1;
 324         }
 325 }
 326 #endif
 327
 328 static u32 get_phy_vendorid(struct ti_lynx *lynx)
 329 {
 330         u32 pvid = 0;
 331         sel_phy_reg_page(lynx, 1);
 332         pvid |= (get_phy_reg(lynx, 10) << 16);
 333         pvid |= (get_phy_reg(lynx, 11) << 8);
 334         pvid |= get_phy_reg(lynx, 12);
 335         PRINT(KERN_INFO, lynx->id, "PHY vendor id 0x%06x", pvid);
 336         return pvid;
 337 }
 338
 339 static u32 get_phy_productid(struct ti_lynx *lynx)
 340 {
 341         u32 id = 0;
 342         sel_phy_reg_page(lynx, 1);
 343         id |= (get_phy_reg(lynx, 13) << 16);
 344         id |= (get_phy_reg(lynx, 14) << 8);
 345         id |= get_phy_reg(lynx, 15);
 346         PRINT(KERN_INFO, lynx->id, "PHY product id 0x%06x", id);
 347         return id;
 348 }
 349
 350 static quadlet_t generate_own_selfid(struct ti_lynx *lynx,
 351                                      struct hpsb_host *host)
 352 {
 353         quadlet_t lsid;
 354         char phyreg[7];
 355         int i;
 356
 357         phyreg[0] = lynx->phy_reg0;
 358         for (i = 1; i < 7; i++) {
 359                 phyreg[i] = get_phy_reg(lynx, i);
 360         }
 361
 362         /* FIXME? We assume a TSB21LV03A phy here.  This code doesn't support
 363            more than 3 ports on the PHY anyway. */
 364
 365         lsid = 0x80400000 | ((phyreg[0] & 0xfc) << 22);
 366         lsid |= (phyreg[1] & 0x3f) << 16; /* gap count */
 367         lsid |= (phyreg[2] & 0xc0) << 8; /* max speed */
 368         if (!hpsb_disable_irm)
 369                 lsid |= (phyreg[6] & 0x01) << 11; /* contender (phy dependent) */
 370         /* lsid |= 1 << 11; *//* set contender (hack) */
 371         lsid |= (phyreg[6] & 0x10) >> 3; /* initiated reset */
 372
 373         for (i = 0; i < (phyreg[2] & 0xf); i++) { /* ports */
 374                 if (phyreg[3 + i] & 0x4) {
 375                         lsid |= (((phyreg[3 + i] & 0x8) | 0x10) >> 3)
 376                                 << (6 - i*2);
 377                 } else {
 378                         lsid |= 1 << (6 - i*2);
 379                 }
 380         }
 381
 382         cpu_to_be32s(&lsid);
 383         PRINT(KERN_DEBUG, lynx->id, "generated own selfid 0x%x", lsid);
 384         return lsid;
 385 }
 386
 387 static void handle_selfid(struct ti_lynx *lynx, struct hpsb_host *host)
 388 {
 389         quadlet_t *q = lynx->rcv_page;
 390         int phyid, isroot, size;
 391         quadlet_t lsid = 0;
 392         int i;
 393
 394         if (lynx->phy_reg0 == -1 || lynx->selfid_size == -1) return;
 395
 396         size = lynx->selfid_size;
 397         phyid = lynx->phy_reg0;
 398
 399         i = (size > 16 ? 16 : size) / 4 - 1;
 400         while (i >= 0) {
 401                 cpu_to_be32s(&q[i]);
 402                 i--;
 403         }
 404
 405         if (!lynx->phyic.reg_1394a) {
 406                 lsid = generate_own_selfid(lynx, host);
 407         }
 408
 409         isroot = (phyid & 2) != 0;
 410         phyid >>= 2;
 411         PRINT(KERN_INFO, lynx->id, "SelfID process finished (phyid %d, %s)",
 412               phyid, (isroot ? "root" : "not root"));
 413         reg_write(lynx, LINK_ID, (0xffc0 | phyid) << 16);
 414
 415         if (!lynx->phyic.reg_1394a && !size) {
 416                 hpsb_selfid_received(host, lsid);
 417         }
 418
 419         while (size > 0) {
 420                 struct selfid *sid = (struct selfid *)q;
 421
 422                 if (!lynx->phyic.reg_1394a && !sid->extended
 423                     && (sid->phy_id == (phyid + 1))) {
 424                         hpsb_selfid_received(host, lsid);
 425                 }
 426
 427                 if (q[0] == ~q[1]) {
 428                         PRINT(KERN_DEBUG, lynx->id, "SelfID packet 0x%x rcvd",
 429                               q[0]);
 430                         hpsb_selfid_received(host, q[0]);
 431                 } else {
 432                         PRINT(KERN_INFO, lynx->id,
 433                               "inconsistent selfid 0x%x/0x%x", q[0], q[1]);
 434                 }
 435                 q += 2;
 436                 size -= 8;
 437         }
 438
 439         if (!lynx->phyic.reg_1394a && isroot && phyid != 0) {
 440                 hpsb_selfid_received(host, lsid);
 441         }
 442
 443         hpsb_selfid_complete(host, phyid, isroot);
 444
 445         if (host->in_bus_reset) return; /* in bus reset again */
 446
 447         if (isroot) reg_set_bits(lynx, LINK_CONTROL, LINK_CONTROL_CYCMASTER); //FIXME: I do not think, we need this here
 448         reg_set_bits(lynx, LINK_CONTROL,
 449                      LINK_CONTROL_RCV_CMP_VALID | LINK_CONTROL_TX_ASYNC_EN
 450                      | LINK_CONTROL_RX_ASYNC_EN | LINK_CONTROL_CYCTIMEREN);
 451 }
 452
 453
 454
 455 /* This must be called with the respective queue_lock held. */
 456 static void send_next(struct ti_lynx *lynx, int what)
 457 {
 458         struct ti_pcl pcl;
 459         struct lynx_send_data *d;
 460         struct hpsb_packet *packet;
 461
 462 #if 0 /* has been removed from ieee1394 core */
 463         d = (what == hpsb_iso ? &lynx->iso_send : &lynx->async);
 464 #else
 465         d = &lynx->async;
 466 #endif
 467         if (!list_empty(&d->pcl_queue)) {
 468                 PRINT(KERN_ERR, lynx->id, "trying to queue a new packet in nonempty fifo");
 469                 BUG();
 470         }
 471
 472         packet = driver_packet(d->queue.next);
 473         list_move_tail(&packet->driver_list, &d->pcl_queue);
 474
 475         d->header_dma = pci_map_single(lynx->dev, packet->header,
 476                                        packet->header_size, PCI_DMA_TODEVICE);
 477         if (packet->data_size) {
 478                 d->data_dma = pci_map_single(lynx->dev, packet->data,
 479                                              packet->data_size,
 480                                              PCI_DMA_TODEVICE);
 481         } else {
 482                 d->data_dma = 0;
 483         }
 484
 485         pcl.next = PCL_NEXT_INVALID;
 486         pcl.async_error_next = PCL_NEXT_INVALID;
 487         pcl.pcl_status = 0;
 488         pcl.buffer[0].control = packet->speed_code << 14 | packet->header_size;
 489 #ifndef __BIG_ENDIAN
 490         pcl.buffer[0].control |= PCL_BIGENDIAN;
 491 #endif
 492         pcl.buffer[0].pointer = d->header_dma;
 493         pcl.buffer[1].control = PCL_LAST_BUFF | packet->data_size;
 494         pcl.buffer[1].pointer = d->data_dma;
 495
 496         switch (packet->type) {
 497         case hpsb_async:
 498                 pcl.buffer[0].control |= PCL_CMD_XMT;
 499                 break;
 500 #if 0 /* has been removed from ieee1394 core */
 501         case hpsb_iso:
 502                 pcl.buffer[0].control |= PCL_CMD_XMT | PCL_ISOMODE;
 503                 break;
 504 #endif
 505         case hpsb_raw:
 506                 pcl.buffer[0].control |= PCL_CMD_UNFXMT;
 507                 break;
 508         }
 509
 510         put_pcl(lynx, d->pcl, &pcl);
 511         run_pcl(lynx, d->pcl_start, d->channel);
 512 }
 513
 514
 515 /* called from subsystem core */
 516 static int lynx_transmit(struct hpsb_host *host, struct hpsb_packet *packet)
 517 {
 518         struct ti_lynx *lynx = host->hostdata;
 519         struct lynx_send_data *d;
 520         unsigned long flags;
 521
 522         if (packet->data_size >= 4096) {
 523                 PRINT(KERN_ERR, lynx->id, "transmit packet data too big (%Zd)",
 524                       packet->data_size);
 525                 return -EOVERFLOW;
 526         }
 527
 528         switch (packet->type) {
 529         case hpsb_async:
 530         case hpsb_raw:
 531                 d = &lynx->async;
 532                 break;
 533 #if 0 /* has been removed from ieee1394 core */
 534         case hpsb_iso:
 535                 d = &lynx->iso_send;
 536                 break;
 537 #endif
 538         default:
 539                 PRINT(KERN_ERR, lynx->id, "invalid packet type %d",
 540                       packet->type);
 541                 return -EINVAL;
 542         }
 543
 544         if (packet->tcode == TCODE_WRITEQ
 545             || packet->tcode == TCODE_READQ_RESPONSE) {
 546                 cpu_to_be32s(&packet->header[3]);
 547         }
 548
 549         spin_lock_irqsave(&d->queue_lock, flags);
 550
 551         list_add_tail(&packet->driver_list, &d->queue);
 552         if (list_empty(&d->pcl_queue))
 553                 send_next(lynx, packet->type);
 554
 555         spin_unlock_irqrestore(&d->queue_lock, flags);
 556
 557         return 0;
 558 }
 559
 560
 561 /* called from subsystem core */
 562 static int lynx_devctl(struct hpsb_host *host, enum devctl_cmd cmd, int arg)
 563 {
 564         struct ti_lynx *lynx = host->hostdata;
 565         int retval = 0;
 566         struct hpsb_packet *packet;
 567         LIST_HEAD(packet_list);
 568         unsigned long flags;
 569         int phy_reg;
 570
 571         switch (cmd) {
 572         case RESET_BUS:
 573                 if (reg_read(lynx, LINK_INT_STATUS) & LINK_INT_PHY_BUSRESET) {
 574                         retval = 0;
 575                         break;
 576                 }
 577
 578                 switch (arg) {
 579                 case SHORT_RESET:
 580                         if (lynx->phyic.reg_1394a) {
 581                                 phy_reg = get_phy_reg(lynx, 5);
 582                                 if (phy_reg == -1) {
 583                                         PRINT(KERN_ERR, lynx->id, "cannot reset bus, because read phy reg failed");
 584                                         retval = -1;
 585                                         break;
 586                                 }
 587                                 phy_reg |= 0x40;
 588
 589                                 PRINT(KERN_INFO, lynx->id, "resetting bus (short bus reset) on request");
 590
 591                                 lynx->selfid_size = -1;
 592                                 lynx->phy_reg0 = -1;
 593                                 set_phy_reg(lynx, 5, phy_reg); /* set ISBR */
 594                                 break;
 595                         } else {
 596                                 PRINT(KERN_INFO, lynx->id, "cannot do short bus reset, because of old phy");
 597                                 /* fall through to long bus reset */
 598                         }
 599                 case LONG_RESET:
 600                         phy_reg = get_phy_reg(lynx, 1);
 601                         if (phy_reg == -1) {
 602                                 PRINT(KERN_ERR, lynx->id, "cannot reset bus, because read phy reg failed");
 603                                 retval = -1;
 604                                 break;
 605                         }
 606                         phy_reg |= 0x40;
 607
 608                         PRINT(KERN_INFO, lynx->id, "resetting bus (long bus reset) on request");
 609
 610                         lynx->selfid_size = -1;
 611                         lynx->phy_reg0 = -1;
 612                         set_phy_reg(lynx, 1, phy_reg); /* clear RHB, set IBR */
 613                         break;
 614                 case SHORT_RESET_NO_FORCE_ROOT:
 615                         if (lynx->phyic.reg_1394a) {
 616                                 phy_reg = get_phy_reg(lynx, 1);
 617                                 if (phy_reg == -1) {
 618                                         PRINT(KERN_ERR, lynx->id, "cannot reset bus, because read phy reg failed");
 619                                         retval = -1;
 620                                         break;
 621                                 }
 622                                 if (phy_reg & 0x80) {
 623                                         phy_reg &= ~0x80;
 624                                         set_phy_reg(lynx, 1, phy_reg); /* clear RHB */
 625                                 }
 626
 627                                 phy_reg = get_phy_reg(lynx, 5);
 628                                 if (phy_reg == -1) {
 629                                         PRINT(KERN_ERR, lynx->id, "cannot reset bus, because read phy reg failed");
 630                                         retval = -1;
 631                                         break;
 632                                 }
 633                                 phy_reg |= 0x40;
 634
 635                                 PRINT(KERN_INFO, lynx->id, "resetting bus (short bus reset, no force_root) on request");
 636
 637                                 lynx->selfid_size = -1;
 638                                 lynx->phy_reg0 = -1;
 639                                 set_phy_reg(lynx, 5, phy_reg); /* set ISBR */
 640                                 break;
 641                         } else {
 642                                 PRINT(KERN_INFO, lynx->id, "cannot do short bus reset, because of old phy");
 643                                 /* fall through to long bus reset */
 644                         }
 645                 case LONG_RESET_NO_FORCE_ROOT:
 646                         phy_reg = get_phy_reg(lynx, 1);
 647                         if (phy_reg == -1) {
 648                                 PRINT(KERN_ERR, lynx->id, "cannot reset bus, because read phy reg failed");
 649                                 retval = -1;
 650                                 break;
 651                         }
 652                         phy_reg &= ~0x80;
 653                         phy_reg |= 0x40;
 654
 655                         PRINT(KERN_INFO, lynx->id, "resetting bus (long bus reset, no force_root) on request");
 656
 657                         lynx->selfid_size = -1;
 658                         lynx->phy_reg0 = -1;
 659                         set_phy_reg(lynx, 1, phy_reg); /* clear RHB, set IBR */
 660                         break;
 661                 case SHORT_RESET_FORCE_ROOT:
 662                         if (lynx->phyic.reg_1394a) {
 663                                 phy_reg = get_phy_reg(lynx, 1);
 664                                 if (phy_reg == -1) {
 665                                         PRINT(KERN_ERR, lynx->id, "cannot reset bus, because read phy reg failed");
 666                                         retval = -1;
 667                                         break;
 668                                 }
 669                                 if (!(phy_reg & 0x80)) {
 670                                         phy_reg |= 0x80;
 671                                         set_phy_reg(lynx, 1, phy_reg); /* set RHB */
 672                                 }
 673
 674                                 phy_reg = get_phy_reg(lynx, 5);
 675                                 if (phy_reg == -1) {
 676                                         PRINT(KERN_ERR, lynx->id, "cannot reset bus, because read phy reg failed");
 677                                         retval = -1;
 678                                         break;
 679                                 }
 680                                 phy_reg |= 0x40;
 681
 682                                 PRINT(KERN_INFO, lynx->id, "resetting bus (short bus reset, force_root set) on request");
 683
 684                                 lynx->selfid_size = -1;
 685                                 lynx->phy_reg0 = -1;
 686                                 set_phy_reg(lynx, 5, phy_reg); /* set ISBR */
 687                                 break;
 688                         } else {
 689                                 PRINT(KERN_INFO, lynx->id, "cannot do short bus reset, because of old phy");
 690                                 /* fall through to long bus reset */
 691                         }
 692                 case LONG_RESET_FORCE_ROOT:
 693                         phy_reg = get_phy_reg(lynx, 1);
 694                         if (phy_reg == -1) {
 695                                 PRINT(KERN_ERR, lynx->id, "cannot reset bus, because read phy reg failed");
 696                                 retval = -1;
 697                                 break;
 698                         }
 699                         phy_reg |= 0xc0;
 700
 701                         PRINT(KERN_INFO, lynx->id, "resetting bus (long bus reset, force_root set) on request");
 702
 703                         lynx->selfid_size = -1;
 704                         lynx->phy_reg0 = -1;
 705                         set_phy_reg(lynx, 1, phy_reg); /* set IBR and RHB */
 706                         break;
 707                 default:
 708                         PRINT(KERN_ERR, lynx->id, "unknown argument for reset_bus command %d", arg);
 709                         retval = -1;
 710                 }
 711
 712                 break;
 713
 714         case GET_CYCLE_COUNTER:
 715                 retval = reg_read(lynx, CYCLE_TIMER);
 716                 break;
 717
 718         case SET_CYCLE_COUNTER:
 719                 reg_write(lynx, CYCLE_TIMER, arg);
 720                 break;
 721
 722         case SET_BUS_ID:
 723                 reg_write(lynx, LINK_ID,
 724                           (arg << 22) | (reg_read(lynx, LINK_ID) & 0x003f0000));
 725                 break;
 726
 727         case ACT_CYCLE_MASTER:
 728                 if (arg) {
 729                         reg_set_bits(lynx, LINK_CONTROL,
 730                                      LINK_CONTROL_CYCMASTER);
 731                 } else {
 732                         reg_clear_bits(lynx, LINK_CONTROL,
 733                                        LINK_CONTROL_CYCMASTER);
 734                 }
 735                 break;
 736
 737         case CANCEL_REQUESTS:
 738                 spin_lock_irqsave(&lynx->async.queue_lock, flags);
 739
 740                 reg_write(lynx, DMA_CHAN_CTRL(CHANNEL_ASYNC_SEND), 0);
 741                 list_splice_init(&lynx->async.queue, &packet_list);
 742
 743                 if (list_empty(&lynx->async.pcl_queue)) {
 744                         spin_unlock_irqrestore(&lynx->async.queue_lock, flags);
 745                         PRINTD(KERN_DEBUG, lynx->id, "no async packet in PCL to cancel");
 746                 } else {
 747                         struct ti_pcl pcl;
 748                         u32 ack;
 749
 750                         PRINT(KERN_INFO, lynx->id, "cancelling async packet, that was already in PCL");
 751
 752                         get_pcl(lynx, lynx->async.pcl, &pcl);
 753
 754                         packet = driver_packet(lynx->async.pcl_queue.next);
 755                         list_del_init(&packet->driver_list);
 756
 757                         pci_unmap_single(lynx->dev, lynx->async.header_dma,
 758                                          packet->header_size, PCI_DMA_TODEVICE);
 759                         if (packet->data_size) {
 760                                 pci_unmap_single(lynx->dev, lynx->async.data_dma,
 761                                                  packet->data_size, PCI_DMA_TODEVICE);
 762                         }
 763
 764                         spin_unlock_irqrestore(&lynx->async.queue_lock, flags);
 765
 766                         if (pcl.pcl_status & DMA_CHAN_STAT_PKTCMPL) {
 767                                 if (pcl.pcl_status & DMA_CHAN_STAT_SPECIALACK) {
 768                                         ack = (pcl.pcl_status >> 15) & 0xf;
 769                                         PRINTD(KERN_INFO, lynx->id, "special ack %d", ack);
 770                                         ack = (ack == 1 ? ACKX_TIMEOUT : ACKX_SEND_ERROR);
 771                                 } else {
 772                                         ack = (pcl.pcl_status >> 15) & 0xf;
 773                                 }
 774                         } else {
 775                                 PRINT(KERN_INFO, lynx->id, "async packet was not completed");
 776                                 ack = ACKX_ABORTED;
 777                         }
 778                         hpsb_packet_sent(host, packet, ack);
 779                 }
 780
 781                 while (!list_empty(&packet_list)) {
 782                         packet = driver_packet(packet_list.next);
 783                         list_del_init(&packet->driver_list);
 784                         hpsb_packet_sent(host, packet, ACKX_ABORTED);
 785                 }
 786
 787                 break;
 788 #if 0 /* has been removed from ieee1394 core */
 789         case ISO_LISTEN_CHANNEL:
 790                 spin_lock_irqsave(&lynx->iso_rcv.lock, flags);
 791
 792                 if (lynx->iso_rcv.chan_count++ == 0) {
 793                         reg_write(lynx, DMA_WORD1_CMP_ENABLE(CHANNEL_ISO_RCV),
 794                                   DMA_WORD1_CMP_ENABLE_MASTER);
 795                 }
 796
 797                 spin_unlock_irqrestore(&lynx->iso_rcv.lock, flags);
 798                 break;
 799
 800         case ISO_UNLISTEN_CHANNEL:
 801                 spin_lock_irqsave(&lynx->iso_rcv.lock, flags);
 802
 803                 if (--lynx->iso_rcv.chan_count == 0) {
 804                         reg_write(lynx, DMA_WORD1_CMP_ENABLE(CHANNEL_ISO_RCV),
 805                                   0);
 806                 }
 807
 808                 spin_unlock_irqrestore(&lynx->iso_rcv.lock, flags);
 809                 break;
 810 #endif
 811         default:
 812                 PRINT(KERN_ERR, lynx->id, "unknown devctl command %d", cmd);
 813                 retval = -1;
 814         }
 815
 816         return retval;
 817 }
 818
 819
 820 /***************************************
 821  * IEEE-1394 functionality section END *
 822  ***************************************/
 823
 824
 825 /********************************************************
 826  * Global stuff (interrupt handler, init/shutdown code) *
 827  ********************************************************/
 828
 829
 830 static irqreturn_t lynx_irq_handler(int irq, void *dev_id)
 831 {
 832         struct ti_lynx *lynx = (struct ti_lynx *)dev_id;
 833         struct hpsb_host *host = lynx->host;
 834         u32 intmask;
 835         u32 linkint;
 836
 837         linkint = reg_read(lynx, LINK_INT_STATUS);
 838         intmask = reg_read(lynx, PCI_INT_STATUS);
 839
 840         if (!(intmask & PCI_INT_INT_PEND))
 841                 return IRQ_NONE;
 842
 843         PRINTD(KERN_DEBUG, lynx->id, "interrupt: 0x%08x / 0x%08x", intmask,
 844                linkint);
 845
 846         reg_write(lynx, LINK_INT_STATUS, linkint);
 847         reg_write(lynx, PCI_INT_STATUS, intmask);
 848
 849         if (intmask & PCI_INT_1394) {
 850                 if (linkint & LINK_INT_PHY_TIMEOUT) {
 851                         PRINT(KERN_INFO, lynx->id, "PHY timeout occurred");
 852                 }
 853                 if (linkint & LINK_INT_PHY_BUSRESET) {
 854                         PRINT(KERN_INFO, lynx->id, "bus reset interrupt");
 855                         lynx->selfid_size = -1;
 856                         lynx->phy_reg0 = -1;
 857                         if (!host->in_bus_reset)
 858                                 hpsb_bus_reset(host);
 859                 }
 860                 if (linkint & LINK_INT_PHY_REG_RCVD) {
 861                         u32 reg;
 862
 863                         spin_lock(&lynx->phy_reg_lock);
 864                         reg = reg_read(lynx, LINK_PHY);
 865                         spin_unlock(&lynx->phy_reg_lock);
 866
 867                         if (!host->in_bus_reset) {
 868                                 PRINT(KERN_INFO, lynx->id,
 869                                       "phy reg received without reset");
 870                         } else if (reg & 0xf00) {
 871                                 PRINT(KERN_INFO, lynx->id,
 872                                       "unsolicited phy reg %d received",
 873                                       (reg >> 8) & 0xf);
 874                         } else {
 875                                 lynx->phy_reg0 = reg & 0xff;
 876                                 handle_selfid(lynx, host);
 877                         }
 878                 }
 879                 if (linkint & LINK_INT_ISO_STUCK) {
 880                         PRINT(KERN_INFO, lynx->id, "isochronous transmitter stuck");
 881                 }
 882                 if (linkint & LINK_INT_ASYNC_STUCK) {
 883                         PRINT(KERN_INFO, lynx->id, "asynchronous transmitter stuck");
 884                 }
 885                 if (linkint & LINK_INT_SENT_REJECT) {
 886                         PRINT(KERN_INFO, lynx->id, "sent reject");
 887                 }
 888                 if (linkint & LINK_INT_TX_INVALID_TC) {
 889                         PRINT(KERN_INFO, lynx->id, "invalid transaction code");
 890                 }
 891                 if (linkint & LINK_INT_GRF_OVERFLOW) {
 892                         /* flush FIFO if overflow happens during reset */
 893                         if (host->in_bus_reset)
 894                                 reg_write(lynx, FIFO_CONTROL,
 895                                           FIFO_CONTROL_GRF_FLUSH);
 896                         PRINT(KERN_INFO, lynx->id, "GRF overflow");
 897                 }
 898                 if (linkint & LINK_INT_ITF_UNDERFLOW) {
 899                         PRINT(KERN_INFO, lynx->id, "ITF underflow");
 900                 }
 901                 if (linkint & LINK_INT_ATF_UNDERFLOW) {
 902                         PRINT(KERN_INFO, lynx->id, "ATF underflow");
 903                 }
 904         }
 905
 906         if (intmask & PCI_INT_DMA_HLT(CHANNEL_ISO_RCV)) {
 907                 PRINTD(KERN_DEBUG, lynx->id, "iso receive");
 908
 909                 spin_lock(&lynx->iso_rcv.lock);
 910
 911                 lynx->iso_rcv.stat[lynx->iso_rcv.next] =
 912                         reg_read(lynx, DMA_CHAN_STAT(CHANNEL_ISO_RCV));
 913
 914                 lynx->iso_rcv.used++;
 915                 lynx->iso_rcv.next = (lynx->iso_rcv.next + 1) % NUM_ISORCV_PCL;
 916
 917                 if ((lynx->iso_rcv.next == lynx->iso_rcv.last)
 918                     || !lynx->iso_rcv.chan_count) {
 919                         PRINTD(KERN_DEBUG, lynx->id, "stopped");
 920                         reg_write(lynx, DMA_WORD1_CMP_ENABLE(CHANNEL_ISO_RCV), 0);
 921                 }
 922
 923                 run_sub_pcl(lynx, lynx->iso_rcv.pcl_start, lynx->iso_rcv.next,
 924                             CHANNEL_ISO_RCV);
 925
 926                 spin_unlock(&lynx->iso_rcv.lock);
 927
 928                 tasklet_schedule(&lynx->iso_rcv.tq);
 929         }
 930
 931         if (intmask & PCI_INT_DMA_HLT(CHANNEL_ASYNC_SEND)) {
 932                 PRINTD(KERN_DEBUG, lynx->id, "async sent");
 933                 spin_lock(&lynx->async.queue_lock);
 934
 935                 if (list_empty(&lynx->async.pcl_queue)) {
 936                         spin_unlock(&lynx->async.queue_lock);
 937                         PRINT(KERN_WARNING, lynx->id, "async dma halted, but no queued packet (maybe it was cancelled)");
 938                 } else {
 939                         struct ti_pcl pcl;
 940                         u32 ack;
 941                         struct hpsb_packet *packet;
 942
 943                         get_pcl(lynx, lynx->async.pcl, &pcl);
 944
 945                         packet = driver_packet(lynx->async.pcl_queue.next);
 946                         list_del_init(&packet->driver_list);
 947
 948                         pci_unmap_single(lynx->dev, lynx->async.header_dma,
 949                                          packet->header_size, PCI_DMA_TODEVICE);
 950                         if (packet->data_size) {
 951                                 pci_unmap_single(lynx->dev, lynx->async.data_dma,
 952                                                  packet->data_size, PCI_DMA_TODEVICE);
 953                         }
 954
 955                         if (!list_empty(&lynx->async.queue)) {
 956                                 send_next(lynx, hpsb_async);
 957                         }
 958
 959                         spin_unlock(&lynx->async.queue_lock);
 960
 961                         if (pcl.pcl_status & DMA_CHAN_STAT_PKTCMPL) {
 962                                 if (pcl.pcl_status & DMA_CHAN_STAT_SPECIALACK) {
 963                                         ack = (pcl.pcl_status >> 15) & 0xf;
 964                                         PRINTD(KERN_INFO, lynx->id, "special ack %d", ack);
 965                                         ack = (ack == 1 ? ACKX_TIMEOUT : ACKX_SEND_ERROR);
 966                                 } else {
 967                                         ack = (pcl.pcl_status >> 15) & 0xf;
 968                                 }
 969                         } else {
 970                                 PRINT(KERN_INFO, lynx->id, "async packet was not completed");
 971                                 ack = ACKX_SEND_ERROR;
 972                         }
 973                         hpsb_packet_sent(host, packet, ack);
 974                 }
 975         }
 976
 977         if (intmask & PCI_INT_DMA_HLT(CHANNEL_ISO_SEND)) {
 978                 PRINTD(KERN_DEBUG, lynx->id, "iso sent");
 979                 spin_lock(&lynx->iso_send.queue_lock);
 980
 981                 if (list_empty(&lynx->iso_send.pcl_queue)) {
 982                         spin_unlock(&lynx->iso_send.queue_lock);
 983                         PRINT(KERN_ERR, lynx->id, "iso send dma halted, but no queued packet");
 984                 } else {
 985                         struct ti_pcl pcl;
 986                         u32 ack;
 987                         struct hpsb_packet *packet;
 988
 989                         get_pcl(lynx, lynx->iso_send.pcl, &pcl);
 990
 991                         packet = driver_packet(lynx->iso_send.pcl_queue.next);
 992                         list_del_init(&packet->driver_list);
 993
 994                         pci_unmap_single(lynx->dev, lynx->iso_send.header_dma,
 995                                          packet->header_size, PCI_DMA_TODEVICE);
 996                         if (packet->data_size) {
 997                                 pci_unmap_single(lynx->dev, lynx->iso_send.data_dma,
 998                                                  packet->data_size, PCI_DMA_TODEVICE);
 999                         }
1000 #if 0 /* has been removed from ieee1394 core */
1001                         if (!list_empty(&lynx->iso_send.queue)) {
1002                                 send_next(lynx, hpsb_iso);
1003                         }
1004 #endif
1005                         spin_unlock(&lynx->iso_send.queue_lock);
1006
1007                         if (pcl.pcl_status & DMA_CHAN_STAT_PKTCMPL) {
1008                                 if (pcl.pcl_status & DMA_CHAN_STAT_SPECIALACK) {
1009                                         ack = (pcl.pcl_status >> 15) & 0xf;
1010                                         PRINTD(KERN_INFO, lynx->id, "special ack %d", ack);
1011                                         ack = (ack == 1 ? ACKX_TIMEOUT : ACKX_SEND_ERROR);
1012                                 } else {
1013                                         ack = (pcl.pcl_status >> 15) & 0xf;
1014                                 }
1015                         } else {
1016                                 PRINT(KERN_INFO, lynx->id, "iso send packet was not completed");
1017                                 ack = ACKX_SEND_ERROR;
1018                         }
1019
1020                         hpsb_packet_sent(host, packet, ack); //FIXME: maybe we should just use ACK_COMPLETE and ACKX_SEND_ERROR
1021                 }
1022         }
1023
1024         if (intmask & PCI_INT_DMA_HLT(CHANNEL_ASYNC_RCV)) {
1025                 /* general receive DMA completed */
1026                 int stat = reg_read(lynx, DMA_CHAN_STAT(CHANNEL_ASYNC_RCV));
1027
1028                 PRINTD(KERN_DEBUG, lynx->id, "received packet size %d",
1029                        stat & 0x1fff);
1030
1031                 if (stat & DMA_CHAN_STAT_SELFID) {
1032                         lynx->selfid_size = stat & 0x1fff;
1033                         handle_selfid(lynx, host);
1034                 } else {
1035                         quadlet_t *q_data = lynx->rcv_page;
1036                         if ((*q_data >> 4 & 0xf) == TCODE_READQ_RESPONSE
1037                             || (*q_data >> 4 & 0xf) == TCODE_WRITEQ) {
1038                                 cpu_to_be32s(q_data + 3);
1039                         }
1040                         hpsb_packet_received(host, q_data, stat & 0x1fff, 0);
1041                 }
1042
1043                 run_pcl(lynx, lynx->rcv_pcl_start, CHANNEL_ASYNC_RCV);
1044         }
1045
1046         return IRQ_HANDLED;
1047 }
1048
1049
1050 static void iso_rcv_bh(struct ti_lynx *lynx)
1051 {
1052         unsigned int idx;
1053         quadlet_t *data;
1054         unsigned long flags;
1055
1056         spin_lock_irqsave(&lynx->iso_rcv.lock, flags);
1057
1058         while (lynx->iso_rcv.used) {
1059                 idx = lynx->iso_rcv.last;
1060                 spin_unlock_irqrestore(&lynx->iso_rcv.lock, flags);
1061
1062                 data = lynx->iso_rcv.page[idx / ISORCV_PER_PAGE]
1063                         + (idx % ISORCV_PER_PAGE) * MAX_ISORCV_SIZE;
1064
1065                 if ((*data >> 16) + 4 != (lynx->iso_rcv.stat[idx] & 0x1fff)) {
1066                         PRINT(KERN_ERR, lynx->id,
1067                               "iso length mismatch 0x%08x/0x%08x", *data,
1068                               lynx->iso_rcv.stat[idx]);
1069                 }
1070
1071                 if (lynx->iso_rcv.stat[idx]
1072                     & (DMA_CHAN_STAT_PCIERR | DMA_CHAN_STAT_PKTERR)) {
1073                         PRINT(KERN_INFO, lynx->id,
1074                               "iso receive error on %d to 0x%p", idx, data);
1075                 } else {
1076                         hpsb_packet_received(lynx->host, data,
1077                                              lynx->iso_rcv.stat[idx] & 0x1fff,
1078                                              0);
1079                 }
1080
1081                 spin_lock_irqsave(&lynx->iso_rcv.lock, flags);
1082                 lynx->iso_rcv.last = (idx + 1) % NUM_ISORCV_PCL;
1083                 lynx->iso_rcv.used--;
1084         }
1085
1086         if (lynx->iso_rcv.chan_count) {
1087                 reg_write(lynx, DMA_WORD1_CMP_ENABLE(CHANNEL_ISO_RCV),
1088                           DMA_WORD1_CMP_ENABLE_MASTER);
1089         }
1090         spin_unlock_irqrestore(&lynx->iso_rcv.lock, flags);
1091 }
1092
1093
1094 static void remove_card(struct pci_dev *dev)
1095 {
1096         struct ti_lynx *lynx;
1097         struct device *lynx_dev;
1098         int i;
1099
1100         lynx = pci_get_drvdata(dev);
1101         if (!lynx) return;
1102         pci_set_drvdata(dev, NULL);
1103
1104         lynx_dev = get_device(&lynx->host->device);
1105
1106         switch (lynx->state) {
1107         case is_host:
1108                 reg_write(lynx, PCI_INT_ENABLE, 0);
1109                 hpsb_remove_host(lynx->host);
1110         case have_intr:
1111                 reg_write(lynx, PCI_INT_ENABLE, 0);
1112                 free_irq(lynx->dev->irq, lynx);
1113
1114                 /* Disable IRM Contender and LCtrl */
1115                 if (lynx->phyic.reg_1394a)
1116                         set_phy_reg(lynx, 4, ~0xc0 & get_phy_reg(lynx, 4));
1117
1118                 /* Let all other nodes know to ignore us */
1119                 lynx_devctl(lynx->host, RESET_BUS, LONG_RESET_NO_FORCE_ROOT);
1120
1121         case have_iomappings:
1122                 reg_set_bits(lynx, MISC_CONTROL, MISC_CONTROL_SWRESET);
1123                 /* Fix buggy cards with autoboot pin not tied low: */
1124                 reg_write(lynx, DMA0_CHAN_CTRL, 0);
1125                 iounmap(lynx->registers);
1126                 iounmap(lynx->local_rom);
1127                 iounmap(lynx->local_ram);
1128                 iounmap(lynx->aux_port);
1129         case have_1394_buffers:
1130                 for (i = 0; i < ISORCV_PAGES; i++) {
1131                         if (lynx->iso_rcv.page[i]) {
1132                                 pci_free_consistent(lynx->dev, PAGE_SIZE,
1133                                                     lynx->iso_rcv.page[i],
1134                                                     lynx->iso_rcv.page_dma[i]);
1135                         }
1136                 }
1137                 pci_free_consistent(lynx->dev, PAGE_SIZE, lynx->rcv_page,
1138                                     lynx->rcv_page_dma);
1139         case have_aux_buf:
1140         case have_pcl_mem:
1141                 pci_free_consistent(lynx->dev, LOCALRAM_SIZE, lynx->pcl_mem,
1142                                     lynx->pcl_mem_dma);
1143         case clear:
1144                 /* do nothing - already freed */
1145                 ;
1146         }
1147
1148         tasklet_kill(&lynx->iso_rcv.tq);
1149
1150         if (lynx_dev)
1151                 put_device(lynx_dev);
1152 }
1153
1154
1155 static int __devinit add_card(struct pci_dev *dev,
1156                               const struct pci_device_id *devid_is_unused)
1157 {
1158 #define FAIL(fmt, args...) do { \
1159         PRINT_G(KERN_ERR, fmt , ## args); \
1160         remove_card(dev); \
1161         return error; \
1162         } while (0)
1163
1164         char irq_buf[16];
1165         struct hpsb_host *host;
1166         struct ti_lynx *lynx; /* shortcut to currently handled device */
1167         struct ti_pcl pcl;
1168         u32 *pcli;
1169         int i;
1170         int error;
1171
1172         error = -ENXIO;
1173
1174         if (pci_set_dma_mask(dev, DMA_BIT_MASK(32)))
1175                 FAIL("DMA address limits not supported for PCILynx hardware");
1176         if (pci_enable_device(dev))
1177                 FAIL("failed to enable PCILynx hardware");
1178         pci_set_master(dev);
1179
1180         error = -ENOMEM;
1181
1182         host = hpsb_alloc_host(&lynx_driver, sizeof(struct ti_lynx), &dev->dev);
1183         if (!host) FAIL("failed to allocate control structure memory");
1184
1185         lynx = host->hostdata;
1186         lynx->id = card_id++;
1187         lynx->dev = dev;
1188         lynx->state = clear;
1189         lynx->host = host;
1190         host->pdev = dev;
1191         pci_set_drvdata(dev, lynx);
1192
1193         spin_lock_init(&lynx->lock);
1194         spin_lock_init(&lynx->phy_reg_lock);
1195
1196         lynx->pcl_mem = pci_alloc_consistent(dev, LOCALRAM_SIZE,
1197                                              &lynx->pcl_mem_dma);
1198
1199         if (lynx->pcl_mem != NULL) {
1200                 lynx->state = have_pcl_mem;
1201                 PRINT(KERN_INFO, lynx->id,
1202                       "allocated PCL memory %d Bytes @ 0x%p", LOCALRAM_SIZE,
1203                       lynx->pcl_mem);
1204         } else {
1205                 FAIL("failed to allocate PCL memory area");
1206         }
1207
1208         lynx->rcv_page = pci_alloc_consistent(dev, PAGE_SIZE,
1209                                               &lynx->rcv_page_dma);
1210         if (lynx->rcv_page == NULL) {
1211                 FAIL("failed to allocate receive buffer");
1212         }
1213         lynx->state = have_1394_buffers;
1214
1215         for (i = 0; i < ISORCV_PAGES; i++) {
1216                 lynx->iso_rcv.page[i] =
1217                         pci_alloc_consistent(dev, PAGE_SIZE,
1218                                              &lynx->iso_rcv.page_dma[i]);
1219                 if (lynx->iso_rcv.page[i] == NULL) {
1220                         FAIL("failed to allocate iso receive buffers");
1221                 }
1222         }
1223
1224         lynx->registers = ioremap_nocache(pci_resource_start(dev,0),
1225                                           PCILYNX_MAX_REGISTER);
1226         lynx->local_ram = ioremap(pci_resource_start(dev,1), PCILYNX_MAX_MEMORY);
1227         lynx->aux_port  = ioremap(pci_resource_start(dev,2), PCILYNX_MAX_MEMORY);
1228         lynx->local_rom = ioremap(pci_resource_start(dev,PCI_ROM_RESOURCE),
1229                                   PCILYNX_MAX_MEMORY);
1230         lynx->state = have_iomappings;
1231
1232         if (lynx->registers == NULL) {
1233                 FAIL("failed to remap registers - card not accessible");
1234         }
1235
1236         reg_set_bits(lynx, MISC_CONTROL, MISC_CONTROL_SWRESET);
1237         /* Fix buggy cards with autoboot pin not tied low: */
1238         reg_write(lynx, DMA0_CHAN_CTRL, 0);
1239
1240         sprintf (irq_buf, "%d", dev->irq);
1241
1242         if (!request_irq(dev->irq, lynx_irq_handler, IRQF_SHARED,
1243                          PCILYNX_DRIVER_NAME, lynx)) {
1244                 PRINT(KERN_INFO, lynx->id, "allocated interrupt %s", irq_buf);
1245                 lynx->state = have_intr;
1246         } else {
1247                 FAIL("failed to allocate shared interrupt %s", irq_buf);
1248         }
1249
1250         /* alloc_pcl return values are not checked, it is expected that the
1251          * provided PCL space is sufficient for the initial allocations */
1252         lynx->rcv_pcl = alloc_pcl(lynx);
1253         lynx->rcv_pcl_start = alloc_pcl(lynx);
1254         lynx->async.pcl = alloc_pcl(lynx);
1255         lynx->async.pcl_start = alloc_pcl(lynx);
1256         lynx->iso_send.pcl = alloc_pcl(lynx);
1257         lynx->iso_send.pcl_start = alloc_pcl(lynx);
1258
1259         for (i = 0; i < NUM_ISORCV_PCL; i++) {
1260                 lynx->iso_rcv.pcl[i] = alloc_pcl(lynx);
1261         }
1262         lynx->iso_rcv.pcl_start = alloc_pcl(lynx);
1263
1264         /* all allocations successful - simple init stuff follows */
1265
1266         reg_write(lynx, PCI_INT_ENABLE, PCI_INT_DMA_ALL);
1267
1268         tasklet_init(&lynx->iso_rcv.tq, (void (*)(unsigned long))iso_rcv_bh,
1269                      (unsigned long)lynx);
1270
1271         spin_lock_init(&lynx->iso_rcv.lock);
1272
1273         spin_lock_init(&lynx->async.queue_lock);
1274         lynx->async.channel = CHANNEL_ASYNC_SEND;
1275         spin_lock_init(&lynx->iso_send.queue_lock);
1276         lynx->iso_send.channel = CHANNEL_ISO_SEND;
1277
1278         PRINT(KERN_INFO, lynx->id, "remapped memory spaces reg 0x%p, rom 0x%p, "
1279               "ram 0x%p, aux 0x%p", lynx->registers, lynx->local_rom,
1280               lynx->local_ram, lynx->aux_port);
1281
1282         /* now, looking for PHY register set */
1283         if ((get_phy_reg(lynx, 2) & 0xe0) == 0xe0) {
1284                 lynx->phyic.reg_1394a = 1;
1285                 PRINT(KERN_INFO, lynx->id,
1286                       "found 1394a conform PHY (using extended register set)");
1287                 lynx->phyic.vendor = get_phy_vendorid(lynx);
1288                 lynx->phyic.product = get_phy_productid(lynx);
1289         } else {
1290                 lynx->phyic.reg_1394a = 0;
1291                 PRINT(KERN_INFO, lynx->id, "found old 1394 PHY");
1292         }
1293
1294         lynx->selfid_size = -1;
1295         lynx->phy_reg0 = -1;
1296
1297         INIT_LIST_HEAD(&lynx->async.queue);
1298         INIT_LIST_HEAD(&lynx->async.pcl_queue);
1299         INIT_LIST_HEAD(&lynx->iso_send.queue);
1300         INIT_LIST_HEAD(&lynx->iso_send.pcl_queue);
1301
1302         pcl.next = pcl_bus(lynx, lynx->rcv_pcl);
1303         put_pcl(lynx, lynx->rcv_pcl_start, &pcl);
1304
1305         pcl.next = PCL_NEXT_INVALID;
1306         pcl.async_error_next = PCL_NEXT_INVALID;
1307
1308         pcl.buffer[0].control = PCL_CMD_RCV | 16;
1309 #ifndef __BIG_ENDIAN
1310         pcl.buffer[0].control |= PCL_BIGENDIAN;
1311 #endif
1312         pcl.buffer[1].control = PCL_LAST_BUFF | 4080;
1313
1314         pcl.buffer[0].pointer = lynx->rcv_page_dma;
1315         pcl.buffer[1].pointer = lynx->rcv_page_dma + 16;
1316         put_pcl(lynx, lynx->rcv_pcl, &pcl);
1317
1318         pcl.next = pcl_bus(lynx, lynx->async.pcl);
1319         pcl.async_error_next = pcl_bus(lynx, lynx->async.pcl);
1320         put_pcl(lynx, lynx->async.pcl_start, &pcl);
1321
1322         pcl.next = pcl_bus(lynx, lynx->iso_send.pcl);
1323         pcl.async_error_next = PCL_NEXT_INVALID;
1324         put_pcl(lynx, lynx->iso_send.pcl_start, &pcl);
1325
1326         pcl.next = PCL_NEXT_INVALID;
1327         pcl.async_error_next = PCL_NEXT_INVALID;
1328         pcl.buffer[0].control = PCL_CMD_RCV | 4;
1329 #ifndef __BIG_ENDIAN
1330         pcl.buffer[0].control |= PCL_BIGENDIAN;
1331 #endif
1332         pcl.buffer[1].control = PCL_LAST_BUFF | 2044;
1333
1334         for (i = 0; i < NUM_ISORCV_PCL; i++) {
1335                 int page = i / ISORCV_PER_PAGE;
1336                 int sec = i % ISORCV_PER_PAGE;
1337
1338                 pcl.buffer[0].pointer = lynx->iso_rcv.page_dma[page]
1339                         + sec * MAX_ISORCV_SIZE;
1340                 pcl.buffer[1].pointer = pcl.buffer[0].pointer + 4;
1341                 put_pcl(lynx, lynx->iso_rcv.pcl[i], &pcl);
1342         }
1343
1344         pcli = (u32 *)&pcl;
1345         for (i = 0; i < NUM_ISORCV_PCL; i++) {
1346                 pcli[i] = pcl_bus(lynx, lynx->iso_rcv.pcl[i]);
1347         }
1348         put_pcl(lynx, lynx->iso_rcv.pcl_start, &pcl);
1349
1350         /* FIFO sizes from left to right: ITF=48 ATF=48 GRF=160 */
1351         reg_write(lynx, FIFO_SIZES, 0x003030a0);
1352         /* 20 byte threshold before triggering PCI transfer */
1353         reg_write(lynx, DMA_GLOBAL_REGISTER, 0x2<<24);
1354         /* threshold on both send FIFOs before transmitting:
1355            FIFO size - cache line size - 1 */
1356         i = reg_read(lynx, PCI_LATENCY_CACHELINE) & 0xff;
1357         i = 0x30 - i - 1;
1358         reg_write(lynx, FIFO_XMIT_THRESHOLD, (i << 8) | i);
1359
1360         reg_set_bits(lynx, PCI_INT_ENABLE, PCI_INT_1394);
1361
1362         reg_write(lynx, LINK_INT_ENABLE, LINK_INT_PHY_TIMEOUT
1363                   | LINK_INT_PHY_REG_RCVD  | LINK_INT_PHY_BUSRESET
1364                   | LINK_INT_ISO_STUCK     | LINK_INT_ASYNC_STUCK
1365                   | LINK_INT_SENT_REJECT   | LINK_INT_TX_INVALID_TC
1366                   | LINK_INT_GRF_OVERFLOW  | LINK_INT_ITF_UNDERFLOW
1367                   | LINK_INT_ATF_UNDERFLOW);
1368
1369         reg_write(lynx, DMA_WORD0_CMP_VALUE(CHANNEL_ASYNC_RCV), 0);
1370         reg_write(lynx, DMA_WORD0_CMP_ENABLE(CHANNEL_ASYNC_RCV), 0xa<<4);
1371         reg_write(lynx, DMA_WORD1_CMP_VALUE(CHANNEL_ASYNC_RCV), 0);
1372         reg_write(lynx, DMA_WORD1_CMP_ENABLE(CHANNEL_ASYNC_RCV),
1373                   DMA_WORD1_CMP_MATCH_LOCAL_NODE | DMA_WORD1_CMP_MATCH_BROADCAST
1374                   | DMA_WORD1_CMP_MATCH_EXACT    | DMA_WORD1_CMP_MATCH_BUS_BCAST
1375                   | DMA_WORD1_CMP_ENABLE_SELF_ID | DMA_WORD1_CMP_ENABLE_MASTER);
1376
1377         run_pcl(lynx, lynx->rcv_pcl_start, CHANNEL_ASYNC_RCV);
1378
1379         reg_write(lynx, DMA_WORD0_CMP_VALUE(CHANNEL_ISO_RCV), 0);
1380         reg_write(lynx, DMA_WORD0_CMP_ENABLE(CHANNEL_ISO_RCV), 0x9<<4);
1381         reg_write(lynx, DMA_WORD1_CMP_VALUE(CHANNEL_ISO_RCV), 0);
1382         reg_write(lynx, DMA_WORD1_CMP_ENABLE(CHANNEL_ISO_RCV), 0);
1383
1384         run_sub_pcl(lynx, lynx->iso_rcv.pcl_start, 0, CHANNEL_ISO_RCV);
1385
1386         reg_write(lynx, LINK_CONTROL, LINK_CONTROL_RCV_CMP_VALID
1387                   | LINK_CONTROL_TX_ISO_EN   | LINK_CONTROL_RX_ISO_EN
1388                   | LINK_CONTROL_TX_ASYNC_EN | LINK_CONTROL_RX_ASYNC_EN
1389                   | LINK_CONTROL_RESET_TX    | LINK_CONTROL_RESET_RX);
1390
1391         if (!lynx->phyic.reg_1394a) {
1392                 if (!hpsb_disable_irm) {
1393                         /* attempt to enable contender bit -FIXME- would this
1394                          * work elsewhere? */
1395                         reg_set_bits(lynx, GPIO_CTRL_A, 0x1);
1396                         reg_write(lynx, GPIO_DATA_BASE + 0x3c, 0x1);
1397                 }
1398         } else {
1399                 /* set the contender (if appropriate) and LCtrl bit in the
1400                  * extended PHY register set. (Should check that PHY_02_EXTENDED
1401                  * is set in register 2?)
1402                  */
1403                 i = get_phy_reg(lynx, 4);
1404                 i |= PHY_04_LCTRL;
1405                 if (hpsb_disable_irm)
1406                         i &= ~PHY_04_CONTENDER;
1407                 else
1408                         i |= PHY_04_CONTENDER;
1409                 if (i != -1) set_phy_reg(lynx, 4, i);
1410         }
1411
1412         if (!skip_eeprom)
1413         {
1414                 /* needed for i2c communication with serial eeprom */
1415                 struct i2c_adapter *i2c_ad;
1416                 struct i2c_algo_bit_data i2c_adapter_data;
1417
1418                 error = -ENOMEM;
1419                 i2c_ad = kzalloc(sizeof(*i2c_ad), GFP_KERNEL);
1420                 if (!i2c_ad) FAIL("failed to allocate I2C adapter memory");
1421
1422                 strlcpy(i2c_ad->name, "PCILynx I2C", sizeof(i2c_ad->name));
1423                 i2c_adapter_data = bit_data;
1424                 i2c_ad->algo_data = &i2c_adapter_data;
1425                 i2c_adapter_data.data = lynx;
1426                 i2c_ad->dev.parent = &dev->dev;
1427
1428                 PRINTD(KERN_DEBUG, lynx->id,"original eeprom control: %d",
1429                        reg_read(lynx, SERIAL_EEPROM_CONTROL));
1430
1431                 /* reset hardware to sane state */
1432                 lynx->i2c_driven_state = 0x00000070;
1433                 reg_write(lynx, SERIAL_EEPROM_CONTROL, lynx->i2c_driven_state);
1434
1435                 if (i2c_bit_add_bus(i2c_ad) < 0)
1436                 {
1437                         kfree(i2c_ad);
1438                         error = -ENXIO;
1439                         FAIL("unable to register i2c");
1440                 }
1441                 else
1442                 {
1443                         /* do i2c stuff */
1444                         unsigned char i2c_cmd = 0x10;
1445                         struct i2c_msg msg[2] = { { 0x50, 0, 1, &i2c_cmd },
1446                                                   { 0x50, I2C_M_RD, 20, (unsigned char*) lynx->bus_info_block }
1447                                                 };
1448
1449                         /* we use i2c_transfer because we have no i2c_client
1450                            at hand */
1451                         if (i2c_transfer(i2c_ad, msg, 2) < 0) {
1452                                 PRINT(KERN_ERR, lynx->id, "unable to read bus info block from i2c");
1453                         } else {
1454                                 PRINT(KERN_INFO, lynx->id, "got bus info block from serial eeprom");
1455                                 /* FIXME: probably we shoud rewrite the max_rec, max_ROM(1394a),
1456                                  * generation(1394a) and link_spd(1394a) field and recalculate
1457                                  * the CRC */
1458
1459                                 for (i = 0; i < 5 ; i++)
1460                                         PRINTD(KERN_DEBUG, lynx->id, "Businfo block quadlet %i: %08x",
1461                                                i, be32_to_cpu(lynx->bus_info_block[i]));
1462
1463                                 /* info_length, crc_length and 1394 magic number to check, if it is really a bus info block */
1464                                 if (((be32_to_cpu(lynx->bus_info_block[0]) & 0xffff0000) == 0x04040000) &&
1465                                     (lynx->bus_info_block[1] == IEEE1394_BUSID_MAGIC))
1466                                 {
1467                                         PRINT(KERN_DEBUG, lynx->id, "read a valid bus info block from");
1468                                 } else {
1469                                         kfree(i2c_ad);
1470                                         error = -ENXIO;
1471                                         FAIL("read something from serial eeprom, but it does not seem to be a valid bus info block");
1472                                 }
1473
1474                         }
1475
1476                         i2c_del_adapter(i2c_ad);
1477                         kfree(i2c_ad);
1478                 }
1479         }
1480
1481         host->csr.guid_hi = be32_to_cpu(lynx->bus_info_block[3]);
1482         host->csr.guid_lo = be32_to_cpu(lynx->bus_info_block[4]);
1483         host->csr.cyc_clk_acc = (be32_to_cpu(lynx->bus_info_block[2]) >> 16) & 0xff;
1484         host->csr.max_rec = (be32_to_cpu(lynx->bus_info_block[2]) >> 12) & 0xf;
1485         if (!lynx->phyic.reg_1394a)
1486                 host->csr.lnk_spd = (get_phy_reg(lynx, 2) & 0xc0) >> 6;
1487         else
1488                 host->csr.lnk_spd = be32_to_cpu(lynx->bus_info_block[2]) & 0x7;
1489
1490         if (hpsb_add_host(host)) {
1491                 error = -ENOMEM;
1492                 FAIL("Failed to register host with highlevel");
1493         }
1494
1495         lynx->state = is_host;
1496
1497         return 0;
1498 #undef FAIL
1499 }
1500
1501
1502 static struct pci_device_id pci_table[] = {
1503         {
1504                 .vendor =    PCI_VENDOR_ID_TI,
1505                 .device =    PCI_DEVICE_ID_TI_PCILYNX,
1506                 .subvendor = PCI_ANY_ID,
1507                 .subdevice = PCI_ANY_ID,
1508         },
1509         { }                     /* Terminating entry */
1510 };
1511
1512 static struct pci_driver lynx_pci_driver = {
1513         .name =     PCILYNX_DRIVER_NAME,
1514         .id_table = pci_table,
1515         .probe =    add_card,
1516         .remove =   remove_card,
1517 };
1518
1519 static struct hpsb_host_driver lynx_driver = {
1520         .owner =           THIS_MODULE,
1521         .name =            PCILYNX_DRIVER_NAME,
1522         .set_hw_config_rom = NULL,
1523         .transmit_packet = lynx_transmit,
1524         .devctl =          lynx_devctl,
1525         .isoctl =          NULL,
1526 };
1527
1528 MODULE_AUTHOR("Andreas E. Bombe <andreas.bombe@munich.netsurf.de>");
1529 MODULE_DESCRIPTION("driver for Texas Instruments PCI Lynx IEEE-1394 controller");
1530 MODULE_LICENSE("GPL");
1531 MODULE_SUPPORTED_DEVICE("pcilynx");
1532 MODULE_DEVICE_TABLE(pci, pci_table);
1533
1534 static int __init pcilynx_init(void)
1535 {
1536         int ret;
1537
1538         ret = pci_register_driver(&lynx_pci_driver);
1539         if (ret < 0) {
1540                 PRINT_G(KERN_ERR, "PCI module init failed");
1541                 return ret;
1542         }
1543
1544         return 0;
1545 }
1546
1547 static void __exit pcilynx_cleanup(void)
1548 {
1549         pci_unregister_driver(&lynx_pci_driver);
1550 }
1551
1552
1553 module_init(pcilynx_init);
1554 module_exit(pcilynx_cleanup);