ide: remove drive->init_speed zeroing
[pandora-kernel.git] / drivers / ide / pci / atiixp.c
1 /*
2  *  linux/drivers/ide/pci/atiixp.c      Version 0.03    Aug 3 2007
3  *
4  *  Copyright (C) 2003 ATI Inc. <hyu@ati.com>
5  *  Copyright (C) 2004,2007 Bartlomiej Zolnierkiewicz
6  */
7
8 #include <linux/types.h>
9 #include <linux/module.h>
10 #include <linux/kernel.h>
11 #include <linux/ioport.h>
12 #include <linux/pci.h>
13 #include <linux/hdreg.h>
14 #include <linux/ide.h>
15 #include <linux/delay.h>
16 #include <linux/init.h>
17
18 #include <asm/io.h>
19
20 #define ATIIXP_IDE_PIO_TIMING           0x40
21 #define ATIIXP_IDE_MDMA_TIMING          0x44
22 #define ATIIXP_IDE_PIO_CONTROL          0x48
23 #define ATIIXP_IDE_PIO_MODE             0x4a
24 #define ATIIXP_IDE_UDMA_CONTROL         0x54
25 #define ATIIXP_IDE_UDMA_MODE            0x56
26
27 typedef struct {
28         u8 command_width;
29         u8 recover_width;
30 } atiixp_ide_timing;
31
32 static atiixp_ide_timing pio_timing[] = {
33         { 0x05, 0x0d },
34         { 0x04, 0x07 },
35         { 0x03, 0x04 },
36         { 0x02, 0x02 },
37         { 0x02, 0x00 },
38 };
39
40 static atiixp_ide_timing mdma_timing[] = {
41         { 0x07, 0x07 },
42         { 0x02, 0x01 },
43         { 0x02, 0x00 },
44 };
45
46 static int save_mdma_mode[4];
47
48 static DEFINE_SPINLOCK(atiixp_lock);
49
50 static void atiixp_dma_host_on(ide_drive_t *drive)
51 {
52         struct pci_dev *dev = drive->hwif->pci_dev;
53         unsigned long flags;
54         u16 tmp16;
55
56         spin_lock_irqsave(&atiixp_lock, flags);
57
58         pci_read_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, &tmp16);
59         if (save_mdma_mode[drive->dn])
60                 tmp16 &= ~(1 << drive->dn);
61         else
62                 tmp16 |= (1 << drive->dn);
63         pci_write_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, tmp16);
64
65         spin_unlock_irqrestore(&atiixp_lock, flags);
66
67         ide_dma_host_on(drive);
68 }
69
70 static void atiixp_dma_host_off(ide_drive_t *drive)
71 {
72         struct pci_dev *dev = drive->hwif->pci_dev;
73         unsigned long flags;
74         u16 tmp16;
75
76         spin_lock_irqsave(&atiixp_lock, flags);
77
78         pci_read_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, &tmp16);
79         tmp16 &= ~(1 << drive->dn);
80         pci_write_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, tmp16);
81
82         spin_unlock_irqrestore(&atiixp_lock, flags);
83
84         ide_dma_host_off(drive);
85 }
86
87 /**
88  *      atiixp_set_pio_mode     -       set host controller for PIO mode
89  *      @drive: drive
90  *      @pio: PIO mode number
91  *
92  *      Set the interface PIO mode.
93  */
94
95 static void atiixp_set_pio_mode(ide_drive_t *drive, const u8 pio)
96 {
97         struct pci_dev *dev = drive->hwif->pci_dev;
98         unsigned long flags;
99         int timing_shift = (drive->dn & 2) ? 16 : 0 + (drive->dn & 1) ? 0 : 8;
100         u32 pio_timing_data;
101         u16 pio_mode_data;
102
103         spin_lock_irqsave(&atiixp_lock, flags);
104
105         pci_read_config_word(dev, ATIIXP_IDE_PIO_MODE, &pio_mode_data);
106         pio_mode_data &= ~(0x07 << (drive->dn * 4));
107         pio_mode_data |= (pio << (drive->dn * 4));
108         pci_write_config_word(dev, ATIIXP_IDE_PIO_MODE, pio_mode_data);
109
110         pci_read_config_dword(dev, ATIIXP_IDE_PIO_TIMING, &pio_timing_data);
111         pio_timing_data &= ~(0xff << timing_shift);
112         pio_timing_data |= (pio_timing[pio].recover_width << timing_shift) |
113                  (pio_timing[pio].command_width << (timing_shift + 4));
114         pci_write_config_dword(dev, ATIIXP_IDE_PIO_TIMING, pio_timing_data);
115
116         spin_unlock_irqrestore(&atiixp_lock, flags);
117 }
118
119 /**
120  *      atiixp_set_dma_mode     -       set host controller for DMA mode
121  *      @drive: drive
122  *      @speed: DMA mode
123  *
124  *      Set a ATIIXP host controller to the desired DMA mode.  This involves
125  *      programming the right timing data into the PCI configuration space.
126  */
127
128 static void atiixp_set_dma_mode(ide_drive_t *drive, const u8 speed)
129 {
130         struct pci_dev *dev = drive->hwif->pci_dev;
131         unsigned long flags;
132         int timing_shift = (drive->dn & 2) ? 16 : 0 + (drive->dn & 1) ? 0 : 8;
133         u32 tmp32;
134         u16 tmp16;
135
136         if (speed < XFER_MW_DMA_0)
137                 return;
138
139         spin_lock_irqsave(&atiixp_lock, flags);
140
141         save_mdma_mode[drive->dn] = 0;
142         if (speed >= XFER_UDMA_0) {
143                 pci_read_config_word(dev, ATIIXP_IDE_UDMA_MODE, &tmp16);
144                 tmp16 &= ~(0x07 << (drive->dn * 4));
145                 tmp16 |= ((speed & 0x07) << (drive->dn * 4));
146                 pci_write_config_word(dev, ATIIXP_IDE_UDMA_MODE, tmp16);
147         } else {
148                 if ((speed >= XFER_MW_DMA_0) && (speed <= XFER_MW_DMA_2)) {
149                         save_mdma_mode[drive->dn] = speed;
150                         pci_read_config_dword(dev, ATIIXP_IDE_MDMA_TIMING, &tmp32);
151                         tmp32 &= ~(0xff << timing_shift);
152                         tmp32 |= (mdma_timing[speed & 0x03].recover_width << timing_shift) |
153                                 (mdma_timing[speed & 0x03].command_width << (timing_shift + 4));
154                         pci_write_config_dword(dev, ATIIXP_IDE_MDMA_TIMING, tmp32);
155                 }
156         }
157
158         spin_unlock_irqrestore(&atiixp_lock, flags);
159 }
160
161 /**
162  *      atiixp_dma_check        -       set up an IDE device
163  *      @drive: IDE drive to configure
164  *
165  *      Set up the ATIIXP interface for the best available speed on this
166  *      interface, preferring DMA to PIO.
167  */
168
169 static int atiixp_dma_check(ide_drive_t *drive)
170 {
171         if (ide_tune_dma(drive))
172                 return 0;
173
174         if (ide_use_fast_pio(drive))
175                 ide_set_max_pio(drive);
176
177         return -1;
178 }
179
180 /**
181  *      init_hwif_atiixp                -       fill in the hwif for the ATIIXP
182  *      @hwif: IDE interface
183  *
184  *      Set up the ide_hwif_t for the ATIIXP interface according to the
185  *      capabilities of the hardware.
186  */
187
188 static void __devinit init_hwif_atiixp(ide_hwif_t *hwif)
189 {
190         u8 udma_mode = 0;
191         u8 ch = hwif->channel;
192         struct pci_dev *pdev = hwif->pci_dev;
193
194         if (!hwif->irq)
195                 hwif->irq = ch ? 15 : 14;
196
197         hwif->autodma = 0;
198         hwif->set_pio_mode = &atiixp_set_pio_mode;
199         hwif->set_dma_mode = &atiixp_set_dma_mode;
200         hwif->drives[0].autotune = 1;
201         hwif->drives[1].autotune = 1;
202
203         if (!hwif->dma_base)
204                 return;
205
206         hwif->atapi_dma = 1;
207         hwif->ultra_mask = 0x3f;
208         hwif->mwdma_mask = 0x07;
209
210         pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ch, &udma_mode);
211
212         if ((udma_mode & 0x07) >= 0x04 || (udma_mode & 0x70) >= 0x40)
213                 hwif->cbl = ATA_CBL_PATA80;
214         else
215                 hwif->cbl = ATA_CBL_PATA40;
216
217         hwif->dma_host_on = &atiixp_dma_host_on;
218         hwif->dma_host_off = &atiixp_dma_host_off;
219         hwif->ide_dma_check = &atiixp_dma_check;
220         if (!noautodma)
221                 hwif->autodma = 1;
222
223         hwif->drives[1].autodma = hwif->autodma;
224         hwif->drives[0].autodma = hwif->autodma;
225 }
226
227
228 static ide_pci_device_t atiixp_pci_info[] __devinitdata = {
229         {       /* 0 */
230                 .name           = "ATIIXP",
231                 .init_hwif      = init_hwif_atiixp,
232                 .autodma        = AUTODMA,
233                 .enablebits     = {{0x48,0x01,0x00}, {0x48,0x08,0x00}},
234                 .bootable       = ON_BOARD,
235                 .pio_mask       = ATA_PIO4,
236         },{     /* 1 */
237                 .name           = "SB600_PATA",
238                 .init_hwif      = init_hwif_atiixp,
239                 .autodma        = AUTODMA,
240                 .enablebits     = {{0x48,0x01,0x00}, {0x00,0x00,0x00}},
241                 .bootable       = ON_BOARD,
242                 .host_flags     = IDE_HFLAG_SINGLE,
243                 .pio_mask       = ATA_PIO4,
244         },
245 };
246
247 /**
248  *      atiixp_init_one -       called when a ATIIXP is found
249  *      @dev: the atiixp device
250  *      @id: the matching pci id
251  *
252  *      Called when the PCI registration layer (or the IDE initialization)
253  *      finds a device matching our IDE device tables.
254  */
255
256 static int __devinit atiixp_init_one(struct pci_dev *dev, const struct pci_device_id *id)
257 {
258         return ide_setup_pci_device(dev, &atiixp_pci_info[id->driver_data]);
259 }
260
261 static struct pci_device_id atiixp_pci_tbl[] = {
262         { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP200_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
263         { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
264         { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
265         { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
266         { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
267         { 0, },
268 };
269 MODULE_DEVICE_TABLE(pci, atiixp_pci_tbl);
270
271 static struct pci_driver driver = {
272         .name           = "ATIIXP_IDE",
273         .id_table       = atiixp_pci_tbl,
274         .probe          = atiixp_init_one,
275 };
276
277 static int __init atiixp_ide_init(void)
278 {
279         return ide_pci_register_driver(&driver);
280 }
281
282 module_init(atiixp_ide_init);
283
284 MODULE_AUTHOR("HUI YU");
285 MODULE_DESCRIPTION("PCI driver module for ATI IXP IDE");
286 MODULE_LICENSE("GPL");