ide: remove ->end_request method
[pandora-kernel.git] / drivers / ide / ide-disk.c
1 /*
2  *  Copyright (C) 1994-1998        Linus Torvalds & authors (see below)
3  *  Copyright (C) 1998-2002        Linux ATA Development
4  *                                    Andre Hedrick <andre@linux-ide.org>
5  *  Copyright (C) 2003             Red Hat
6  *  Copyright (C) 2003-2005, 2007  Bartlomiej Zolnierkiewicz
7  */
8
9 /*
10  *  Mostly written by Mark Lord <mlord@pobox.com>
11  *                and Gadi Oxman <gadio@netvision.net.il>
12  *                and Andre Hedrick <andre@linux-ide.org>
13  *
14  * This is the IDE/ATA disk driver, as evolved from hd.c and ide.c.
15  */
16
17 #include <linux/types.h>
18 #include <linux/string.h>
19 #include <linux/kernel.h>
20 #include <linux/timer.h>
21 #include <linux/mm.h>
22 #include <linux/interrupt.h>
23 #include <linux/major.h>
24 #include <linux/errno.h>
25 #include <linux/genhd.h>
26 #include <linux/slab.h>
27 #include <linux/delay.h>
28 #include <linux/mutex.h>
29 #include <linux/leds.h>
30 #include <linux/ide.h>
31 #include <linux/hdreg.h>
32
33 #include <asm/byteorder.h>
34 #include <asm/irq.h>
35 #include <asm/uaccess.h>
36 #include <asm/io.h>
37 #include <asm/div64.h>
38
39 #include "ide-disk.h"
40
41 static const u8 ide_rw_cmds[] = {
42         ATA_CMD_READ_MULTI,
43         ATA_CMD_WRITE_MULTI,
44         ATA_CMD_READ_MULTI_EXT,
45         ATA_CMD_WRITE_MULTI_EXT,
46         ATA_CMD_PIO_READ,
47         ATA_CMD_PIO_WRITE,
48         ATA_CMD_PIO_READ_EXT,
49         ATA_CMD_PIO_WRITE_EXT,
50         ATA_CMD_READ,
51         ATA_CMD_WRITE,
52         ATA_CMD_READ_EXT,
53         ATA_CMD_WRITE_EXT,
54 };
55
56 static const u8 ide_data_phases[] = {
57         TASKFILE_MULTI_IN,
58         TASKFILE_MULTI_OUT,
59         TASKFILE_IN,
60         TASKFILE_OUT,
61         TASKFILE_IN_DMA,
62         TASKFILE_OUT_DMA,
63 };
64
65 static void ide_tf_set_cmd(ide_drive_t *drive, ide_task_t *task, u8 dma)
66 {
67         u8 index, lba48, write;
68
69         lba48 = (task->tf_flags & IDE_TFLAG_LBA48) ? 2 : 0;
70         write = (task->tf_flags & IDE_TFLAG_WRITE) ? 1 : 0;
71
72         if (dma)
73                 index = 8;
74         else
75                 index = drive->mult_count ? 0 : 4;
76
77         task->tf.command = ide_rw_cmds[index + lba48 + write];
78
79         if (dma)
80                 index = 8; /* fixup index */
81
82         task->data_phase = ide_data_phases[index / 2 + write];
83 }
84
85 /*
86  * __ide_do_rw_disk() issues READ and WRITE commands to a disk,
87  * using LBA if supported, or CHS otherwise, to address sectors.
88  */
89 static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq,
90                                         sector_t block)
91 {
92         ide_hwif_t *hwif        = drive->hwif;
93         u16 nsectors            = (u16)rq->nr_sectors;
94         u8 lba48                = !!(drive->dev_flags & IDE_DFLAG_LBA48);
95         u8 dma                  = !!(drive->dev_flags & IDE_DFLAG_USING_DMA);
96         ide_task_t              task;
97         struct ide_taskfile     *tf = &task.tf;
98         ide_startstop_t         rc;
99
100         if ((hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) && lba48 && dma) {
101                 if (block + rq->nr_sectors > 1ULL << 28)
102                         dma = 0;
103                 else
104                         lba48 = 0;
105         }
106
107         if (!dma) {
108                 ide_init_sg_cmd(drive, rq);
109                 ide_map_sg(drive, rq);
110         }
111
112         memset(&task, 0, sizeof(task));
113         task.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
114
115         if (drive->dev_flags & IDE_DFLAG_LBA) {
116                 if (lba48) {
117                         pr_debug("%s: LBA=0x%012llx\n", drive->name,
118                                         (unsigned long long)block);
119
120                         tf->hob_nsect = (nsectors >> 8) & 0xff;
121                         tf->hob_lbal  = (u8)(block >> 24);
122                         if (sizeof(block) != 4) {
123                                 tf->hob_lbam = (u8)((u64)block >> 32);
124                                 tf->hob_lbah = (u8)((u64)block >> 40);
125                         }
126
127                         tf->nsect  = nsectors & 0xff;
128                         tf->lbal   = (u8) block;
129                         tf->lbam   = (u8)(block >>  8);
130                         tf->lbah   = (u8)(block >> 16);
131
132                         task.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_HOB);
133                 } else {
134                         tf->nsect  = nsectors & 0xff;
135                         tf->lbal   = block;
136                         tf->lbam   = block >>= 8;
137                         tf->lbah   = block >>= 8;
138                         tf->device = (block >> 8) & 0xf;
139                 }
140
141                 tf->device |= ATA_LBA;
142         } else {
143                 unsigned int sect, head, cyl, track;
144
145                 track = (int)block / drive->sect;
146                 sect  = (int)block % drive->sect + 1;
147                 head  = track % drive->head;
148                 cyl   = track / drive->head;
149
150                 pr_debug("%s: CHS=%u/%u/%u\n", drive->name, cyl, head, sect);
151
152                 tf->nsect  = nsectors & 0xff;
153                 tf->lbal   = sect;
154                 tf->lbam   = cyl;
155                 tf->lbah   = cyl >> 8;
156                 tf->device = head;
157         }
158
159         if (rq_data_dir(rq))
160                 task.tf_flags |= IDE_TFLAG_WRITE;
161
162         ide_tf_set_cmd(drive, &task, dma);
163         task.rq = rq;
164
165         rc = do_rw_taskfile(drive, &task);
166
167         if (rc == ide_stopped && dma) {
168                 /* fallback to PIO */
169                 task.tf_flags |= IDE_TFLAG_DMA_PIO_FALLBACK;
170                 ide_tf_set_cmd(drive, &task, 0);
171                 ide_init_sg_cmd(drive, rq);
172                 rc = do_rw_taskfile(drive, &task);
173         }
174
175         return rc;
176 }
177
178 /*
179  * 268435455  == 137439 MB or 28bit limit
180  * 320173056  == 163929 MB or 48bit addressing
181  * 1073741822 == 549756 MB or 48bit addressing fake drive
182  */
183
184 static ide_startstop_t ide_do_rw_disk(ide_drive_t *drive, struct request *rq,
185                                       sector_t block)
186 {
187         ide_hwif_t *hwif = drive->hwif;
188
189         BUG_ON(drive->dev_flags & IDE_DFLAG_BLOCKED);
190
191         if (!blk_fs_request(rq)) {
192                 blk_dump_rq_flags(rq, "ide_do_rw_disk - bad command");
193                 ide_end_request(drive, 0, 0);
194                 return ide_stopped;
195         }
196
197         ledtrig_ide_activity();
198
199         pr_debug("%s: %sing: block=%llu, sectors=%lu, buffer=0x%08lx\n",
200                  drive->name, rq_data_dir(rq) == READ ? "read" : "writ",
201                  (unsigned long long)block, rq->nr_sectors,
202                  (unsigned long)rq->buffer);
203
204         if (hwif->rw_disk)
205                 hwif->rw_disk(drive, rq);
206
207         return __ide_do_rw_disk(drive, rq, block);
208 }
209
210 /*
211  * Queries for true maximum capacity of the drive.
212  * Returns maximum LBA address (> 0) of the drive, 0 if failed.
213  */
214 static u64 idedisk_read_native_max_address(ide_drive_t *drive, int lba48)
215 {
216         ide_task_t args;
217         struct ide_taskfile *tf = &args.tf;
218         u64 addr = 0;
219
220         /* Create IDE/ATA command request structure */
221         memset(&args, 0, sizeof(ide_task_t));
222         if (lba48)
223                 tf->command = ATA_CMD_READ_NATIVE_MAX_EXT;
224         else
225                 tf->command = ATA_CMD_READ_NATIVE_MAX;
226         tf->device  = ATA_LBA;
227         args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
228         if (lba48)
229                 args.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_HOB);
230         /* submit command request */
231         ide_no_data_taskfile(drive, &args);
232
233         /* if OK, compute maximum address value */
234         if ((tf->status & 0x01) == 0)
235                 addr = ide_get_lba_addr(tf, lba48) + 1;
236
237         return addr;
238 }
239
240 /*
241  * Sets maximum virtual LBA address of the drive.
242  * Returns new maximum virtual LBA address (> 0) or 0 on failure.
243  */
244 static u64 idedisk_set_max_address(ide_drive_t *drive, u64 addr_req, int lba48)
245 {
246         ide_task_t args;
247         struct ide_taskfile *tf = &args.tf;
248         u64 addr_set = 0;
249
250         addr_req--;
251         /* Create IDE/ATA command request structure */
252         memset(&args, 0, sizeof(ide_task_t));
253         tf->lbal     = (addr_req >>  0) & 0xff;
254         tf->lbam     = (addr_req >>= 8) & 0xff;
255         tf->lbah     = (addr_req >>= 8) & 0xff;
256         if (lba48) {
257                 tf->hob_lbal = (addr_req >>= 8) & 0xff;
258                 tf->hob_lbam = (addr_req >>= 8) & 0xff;
259                 tf->hob_lbah = (addr_req >>= 8) & 0xff;
260                 tf->command  = ATA_CMD_SET_MAX_EXT;
261         } else {
262                 tf->device   = (addr_req >>= 8) & 0x0f;
263                 tf->command  = ATA_CMD_SET_MAX;
264         }
265         tf->device |= ATA_LBA;
266         args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
267         if (lba48)
268                 args.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_HOB);
269         /* submit command request */
270         ide_no_data_taskfile(drive, &args);
271         /* if OK, compute maximum address value */
272         if ((tf->status & 0x01) == 0)
273                 addr_set = ide_get_lba_addr(tf, lba48) + 1;
274
275         return addr_set;
276 }
277
278 static unsigned long long sectors_to_MB(unsigned long long n)
279 {
280         n <<= 9;                /* make it bytes */
281         do_div(n, 1000000);     /* make it MB */
282         return n;
283 }
284
285 /*
286  * Some disks report total number of sectors instead of
287  * maximum sector address.  We list them here.
288  */
289 static const struct drive_list_entry hpa_list[] = {
290         { "ST340823A",  NULL },
291         { "ST320413A",  NULL },
292         { "ST310211A",  NULL },
293         { NULL,         NULL }
294 };
295
296 static void idedisk_check_hpa(ide_drive_t *drive)
297 {
298         unsigned long long capacity, set_max;
299         int lba48 = ata_id_lba48_enabled(drive->id);
300
301         capacity = drive->capacity64;
302
303         set_max = idedisk_read_native_max_address(drive, lba48);
304
305         if (ide_in_drive_list(drive->id, hpa_list)) {
306                 /*
307                  * Since we are inclusive wrt to firmware revisions do this
308                  * extra check and apply the workaround only when needed.
309                  */
310                 if (set_max == capacity + 1)
311                         set_max--;
312         }
313
314         if (set_max <= capacity)
315                 return;
316
317         printk(KERN_INFO "%s: Host Protected Area detected.\n"
318                          "\tcurrent capacity is %llu sectors (%llu MB)\n"
319                          "\tnative  capacity is %llu sectors (%llu MB)\n",
320                          drive->name,
321                          capacity, sectors_to_MB(capacity),
322                          set_max, sectors_to_MB(set_max));
323
324         set_max = idedisk_set_max_address(drive, set_max, lba48);
325
326         if (set_max) {
327                 drive->capacity64 = set_max;
328                 printk(KERN_INFO "%s: Host Protected Area disabled.\n",
329                                  drive->name);
330         }
331 }
332
333 static int ide_disk_get_capacity(ide_drive_t *drive)
334 {
335         u16 *id = drive->id;
336         int lba;
337
338         if (ata_id_lba48_enabled(id)) {
339                 /* drive speaks 48-bit LBA */
340                 lba = 1;
341                 drive->capacity64 = ata_id_u64(id, ATA_ID_LBA_CAPACITY_2);
342         } else if (ata_id_has_lba(id) && ata_id_is_lba_capacity_ok(id)) {
343                 /* drive speaks 28-bit LBA */
344                 lba = 1;
345                 drive->capacity64 = ata_id_u32(id, ATA_ID_LBA_CAPACITY);
346         } else {
347                 /* drive speaks boring old 28-bit CHS */
348                 lba = 0;
349                 drive->capacity64 = drive->cyl * drive->head * drive->sect;
350         }
351
352         if (lba) {
353                 drive->dev_flags |= IDE_DFLAG_LBA;
354
355                 /*
356                 * If this device supports the Host Protected Area feature set,
357                 * then we may need to change our opinion about its capacity.
358                 */
359                 if (ata_id_hpa_enabled(id))
360                         idedisk_check_hpa(drive);
361         }
362
363         /* limit drive capacity to 137GB if LBA48 cannot be used */
364         if ((drive->dev_flags & IDE_DFLAG_LBA48) == 0 &&
365             drive->capacity64 > 1ULL << 28) {
366                 printk(KERN_WARNING "%s: cannot use LBA48 - full capacity "
367                        "%llu sectors (%llu MB)\n",
368                        drive->name, (unsigned long long)drive->capacity64,
369                        sectors_to_MB(drive->capacity64));
370                 drive->capacity64 = 1ULL << 28;
371         }
372
373         if ((drive->hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) &&
374             (drive->dev_flags & IDE_DFLAG_LBA48)) {
375                 if (drive->capacity64 > 1ULL << 28) {
376                         printk(KERN_INFO "%s: cannot use LBA48 DMA - PIO mode"
377                                          " will be used for accessing sectors "
378                                          "> %u\n", drive->name, 1 << 28);
379                 } else
380                         drive->dev_flags &= ~IDE_DFLAG_LBA48;
381         }
382
383         return 0;
384 }
385
386 static void idedisk_prepare_flush(struct request_queue *q, struct request *rq)
387 {
388         ide_drive_t *drive = q->queuedata;
389         ide_task_t *task = kmalloc(sizeof(*task), GFP_ATOMIC);
390
391         /* FIXME: map struct ide_taskfile on rq->cmd[] */
392         BUG_ON(task == NULL);
393
394         memset(task, 0, sizeof(*task));
395         if (ata_id_flush_ext_enabled(drive->id) &&
396             (drive->capacity64 >= (1UL << 28)))
397                 task->tf.command = ATA_CMD_FLUSH_EXT;
398         else
399                 task->tf.command = ATA_CMD_FLUSH;
400         task->tf_flags   = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE |
401                            IDE_TFLAG_DYN;
402         task->data_phase = TASKFILE_NO_DATA;
403
404         rq->cmd_type = REQ_TYPE_ATA_TASKFILE;
405         rq->cmd_flags |= REQ_SOFTBARRIER;
406         rq->special = task;
407 }
408
409 ide_devset_get(multcount, mult_count);
410
411 /*
412  * This is tightly woven into the driver->do_special can not touch.
413  * DON'T do it again until a total personality rewrite is committed.
414  */
415 static int set_multcount(ide_drive_t *drive, int arg)
416 {
417         struct request *rq;
418         int error;
419
420         if (arg < 0 || arg > (drive->id[ATA_ID_MAX_MULTSECT] & 0xff))
421                 return -EINVAL;
422
423         if (drive->special.b.set_multmode)
424                 return -EBUSY;
425
426         rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
427         rq->cmd_type = REQ_TYPE_ATA_TASKFILE;
428
429         drive->mult_req = arg;
430         drive->special.b.set_multmode = 1;
431         error = blk_execute_rq(drive->queue, NULL, rq, 0);
432         blk_put_request(rq);
433
434         return (drive->mult_count == arg) ? 0 : -EIO;
435 }
436
437 ide_devset_get_flag(nowerr, IDE_DFLAG_NOWERR);
438
439 static int set_nowerr(ide_drive_t *drive, int arg)
440 {
441         if (arg < 0 || arg > 1)
442                 return -EINVAL;
443
444         if (arg)
445                 drive->dev_flags |= IDE_DFLAG_NOWERR;
446         else
447                 drive->dev_flags &= ~IDE_DFLAG_NOWERR;
448
449         drive->bad_wstat = arg ? BAD_R_STAT : BAD_W_STAT;
450
451         return 0;
452 }
453
454 static int ide_do_setfeature(ide_drive_t *drive, u8 feature, u8 nsect)
455 {
456         ide_task_t task;
457
458         memset(&task, 0, sizeof(task));
459         task.tf.feature = feature;
460         task.tf.nsect   = nsect;
461         task.tf.command = ATA_CMD_SET_FEATURES;
462         task.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
463
464         return ide_no_data_taskfile(drive, &task);
465 }
466
467 static void update_ordered(ide_drive_t *drive)
468 {
469         u16 *id = drive->id;
470         unsigned ordered = QUEUE_ORDERED_NONE;
471         prepare_flush_fn *prep_fn = NULL;
472
473         if (drive->dev_flags & IDE_DFLAG_WCACHE) {
474                 unsigned long long capacity;
475                 int barrier;
476                 /*
477                  * We must avoid issuing commands a drive does not
478                  * understand or we may crash it. We check flush cache
479                  * is supported. We also check we have the LBA48 flush
480                  * cache if the drive capacity is too large. By this
481                  * time we have trimmed the drive capacity if LBA48 is
482                  * not available so we don't need to recheck that.
483                  */
484                 capacity = ide_gd_capacity(drive);
485                 barrier = ata_id_flush_enabled(id) &&
486                         (drive->dev_flags & IDE_DFLAG_NOFLUSH) == 0 &&
487                         ((drive->dev_flags & IDE_DFLAG_LBA48) == 0 ||
488                          capacity <= (1ULL << 28) ||
489                          ata_id_flush_ext_enabled(id));
490
491                 printk(KERN_INFO "%s: cache flushes %ssupported\n",
492                        drive->name, barrier ? "" : "not ");
493
494                 if (barrier) {
495                         ordered = QUEUE_ORDERED_DRAIN_FLUSH;
496                         prep_fn = idedisk_prepare_flush;
497                 }
498         } else
499                 ordered = QUEUE_ORDERED_DRAIN;
500
501         blk_queue_ordered(drive->queue, ordered, prep_fn);
502 }
503
504 ide_devset_get_flag(wcache, IDE_DFLAG_WCACHE);
505
506 static int set_wcache(ide_drive_t *drive, int arg)
507 {
508         int err = 1;
509
510         if (arg < 0 || arg > 1)
511                 return -EINVAL;
512
513         if (ata_id_flush_enabled(drive->id)) {
514                 err = ide_do_setfeature(drive,
515                         arg ? SETFEATURES_WC_ON : SETFEATURES_WC_OFF, 0);
516                 if (err == 0) {
517                         if (arg)
518                                 drive->dev_flags |= IDE_DFLAG_WCACHE;
519                         else
520                                 drive->dev_flags &= ~IDE_DFLAG_WCACHE;
521                 }
522         }
523
524         update_ordered(drive);
525
526         return err;
527 }
528
529 static int do_idedisk_flushcache(ide_drive_t *drive)
530 {
531         ide_task_t args;
532
533         memset(&args, 0, sizeof(ide_task_t));
534         if (ata_id_flush_ext_enabled(drive->id))
535                 args.tf.command = ATA_CMD_FLUSH_EXT;
536         else
537                 args.tf.command = ATA_CMD_FLUSH;
538         args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
539         return ide_no_data_taskfile(drive, &args);
540 }
541
542 ide_devset_get(acoustic, acoustic);
543
544 static int set_acoustic(ide_drive_t *drive, int arg)
545 {
546         if (arg < 0 || arg > 254)
547                 return -EINVAL;
548
549         ide_do_setfeature(drive,
550                 arg ? SETFEATURES_AAM_ON : SETFEATURES_AAM_OFF, arg);
551
552         drive->acoustic = arg;
553
554         return 0;
555 }
556
557 ide_devset_get_flag(addressing, IDE_DFLAG_LBA48);
558
559 /*
560  * drive->addressing:
561  *      0: 28-bit
562  *      1: 48-bit
563  *      2: 48-bit capable doing 28-bit
564  */
565 static int set_addressing(ide_drive_t *drive, int arg)
566 {
567         if (arg < 0 || arg > 2)
568                 return -EINVAL;
569
570         if (arg && ((drive->hwif->host_flags & IDE_HFLAG_NO_LBA48) ||
571             ata_id_lba48_enabled(drive->id) == 0))
572                 return -EIO;
573
574         if (arg == 2)
575                 arg = 0;
576
577         if (arg)
578                 drive->dev_flags |= IDE_DFLAG_LBA48;
579         else
580                 drive->dev_flags &= ~IDE_DFLAG_LBA48;
581
582         return 0;
583 }
584
585 ide_ext_devset_rw(acoustic, acoustic);
586 ide_ext_devset_rw(address, addressing);
587 ide_ext_devset_rw(multcount, multcount);
588 ide_ext_devset_rw(wcache, wcache);
589
590 ide_ext_devset_rw_sync(nowerr, nowerr);
591
592 static int ide_disk_check(ide_drive_t *drive, const char *s)
593 {
594         return 1;
595 }
596
597 static void ide_disk_setup(ide_drive_t *drive)
598 {
599         struct ide_disk_obj *idkp = drive->driver_data;
600         struct request_queue *q = drive->queue;
601         ide_hwif_t *hwif = drive->hwif;
602         u16 *id = drive->id;
603         char *m = (char *)&id[ATA_ID_PROD];
604         unsigned long long capacity;
605
606         ide_proc_register_driver(drive, idkp->driver);
607
608         if ((drive->dev_flags & IDE_DFLAG_ID_READ) == 0)
609                 return;
610
611         if (drive->dev_flags & IDE_DFLAG_REMOVABLE) {
612                 /*
613                  * Removable disks (eg. SYQUEST); ignore 'WD' drives
614                  */
615                 if (m[0] != 'W' || m[1] != 'D')
616                         drive->dev_flags |= IDE_DFLAG_DOORLOCKING;
617         }
618
619         (void)set_addressing(drive, 1);
620
621         if (drive->dev_flags & IDE_DFLAG_LBA48) {
622                 int max_s = 2048;
623
624                 if (max_s > hwif->rqsize)
625                         max_s = hwif->rqsize;
626
627                 blk_queue_max_sectors(q, max_s);
628         }
629
630         printk(KERN_INFO "%s: max request size: %dKiB\n", drive->name,
631                 q->max_sectors / 2);
632
633         if (ata_id_is_ssd(id))
634                 queue_flag_set_unlocked(QUEUE_FLAG_NONROT, q);
635
636         /* calculate drive capacity, and select LBA if possible */
637         ide_disk_get_capacity(drive);
638
639         /*
640          * if possible, give fdisk access to more of the drive,
641          * by correcting bios_cyls:
642          */
643         capacity = ide_gd_capacity(drive);
644
645         if ((drive->dev_flags & IDE_DFLAG_FORCED_GEOM) == 0) {
646                 if (ata_id_lba48_enabled(drive->id)) {
647                         /* compatibility */
648                         drive->bios_sect = 63;
649                         drive->bios_head = 255;
650                 }
651
652                 if (drive->bios_sect && drive->bios_head) {
653                         unsigned int cap0 = capacity; /* truncate to 32 bits */
654                         unsigned int cylsz, cyl;
655
656                         if (cap0 != capacity)
657                                 drive->bios_cyl = 65535;
658                         else {
659                                 cylsz = drive->bios_sect * drive->bios_head;
660                                 cyl = cap0 / cylsz;
661                                 if (cyl > 65535)
662                                         cyl = 65535;
663                                 if (cyl > drive->bios_cyl)
664                                         drive->bios_cyl = cyl;
665                         }
666                 }
667         }
668         printk(KERN_INFO "%s: %llu sectors (%llu MB)",
669                          drive->name, capacity, sectors_to_MB(capacity));
670
671         /* Only print cache size when it was specified */
672         if (id[ATA_ID_BUF_SIZE])
673                 printk(KERN_CONT " w/%dKiB Cache", id[ATA_ID_BUF_SIZE] / 2);
674
675         printk(KERN_CONT ", CHS=%d/%d/%d\n",
676                          drive->bios_cyl, drive->bios_head, drive->bios_sect);
677
678         /* write cache enabled? */
679         if ((id[ATA_ID_CSFO] & 1) || ata_id_wcache_enabled(id))
680                 drive->dev_flags |= IDE_DFLAG_WCACHE;
681
682         set_wcache(drive, 1);
683
684         if ((drive->dev_flags & IDE_DFLAG_LBA) == 0 &&
685             (drive->head == 0 || drive->head > 16)) {
686                 printk(KERN_ERR "%s: invalid geometry: %d physical heads?\n",
687                         drive->name, drive->head);
688                 drive->dev_flags &= ~IDE_DFLAG_ATTACH;
689         } else
690                 drive->dev_flags |= IDE_DFLAG_ATTACH;
691 }
692
693 static void ide_disk_flush(ide_drive_t *drive)
694 {
695         if (ata_id_flush_enabled(drive->id) == 0 ||
696             (drive->dev_flags & IDE_DFLAG_WCACHE) == 0)
697                 return;
698
699         if (do_idedisk_flushcache(drive))
700                 printk(KERN_INFO "%s: wcache flush failed!\n", drive->name);
701 }
702
703 static int ide_disk_init_media(ide_drive_t *drive, struct gendisk *disk)
704 {
705         return 0;
706 }
707
708 static int ide_disk_set_doorlock(ide_drive_t *drive, struct gendisk *disk,
709                                  int on)
710 {
711         ide_task_t task;
712         int ret;
713
714         if ((drive->dev_flags & IDE_DFLAG_DOORLOCKING) == 0)
715                 return 0;
716
717         memset(&task, 0, sizeof(task));
718         task.tf.command = on ? ATA_CMD_MEDIA_LOCK : ATA_CMD_MEDIA_UNLOCK;
719         task.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
720
721         ret = ide_no_data_taskfile(drive, &task);
722
723         if (ret)
724                 drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING;
725
726         return ret;
727 }
728
729 const struct ide_disk_ops ide_ata_disk_ops = {
730         .check          = ide_disk_check,
731         .get_capacity   = ide_disk_get_capacity,
732         .setup          = ide_disk_setup,
733         .flush          = ide_disk_flush,
734         .init_media     = ide_disk_init_media,
735         .set_doorlock   = ide_disk_set_doorlock,
736         .do_request     = ide_do_rw_disk,
737         .ioctl          = ide_disk_ioctl,
738 };