2 * Copyright (C) 1994-1998 Linus Torvalds & authors (see below)
3 * Copyright (C) 1998-2002 Linux ATA Development
4 * Andre Hedrick <andre@linux-ide.org>
5 * Copyright (C) 2003 Red Hat
6 * Copyright (C) 2003-2005, 2007 Bartlomiej Zolnierkiewicz
10 * Mostly written by Mark Lord <mlord@pobox.com>
11 * and Gadi Oxman <gadio@netvision.net.il>
12 * and Andre Hedrick <andre@linux-ide.org>
14 * This is the IDE/ATA disk driver, as evolved from hd.c and ide.c.
17 #include <linux/types.h>
18 #include <linux/string.h>
19 #include <linux/kernel.h>
20 #include <linux/timer.h>
22 #include <linux/interrupt.h>
23 #include <linux/major.h>
24 #include <linux/errno.h>
25 #include <linux/genhd.h>
26 #include <linux/slab.h>
27 #include <linux/delay.h>
28 #include <linux/mutex.h>
29 #include <linux/leds.h>
30 #include <linux/ide.h>
32 #include <asm/byteorder.h>
34 #include <asm/uaccess.h>
36 #include <asm/div64.h>
40 static const u8 ide_rw_cmds[] = {
43 ATA_CMD_READ_MULTI_EXT,
44 ATA_CMD_WRITE_MULTI_EXT,
48 ATA_CMD_PIO_WRITE_EXT,
55 static void ide_tf_set_cmd(ide_drive_t *drive, struct ide_cmd *cmd, u8 dma)
57 u8 index, lba48, write;
59 lba48 = (cmd->tf_flags & IDE_TFLAG_LBA48) ? 2 : 0;
60 write = (cmd->tf_flags & IDE_TFLAG_WRITE) ? 1 : 0;
63 cmd->protocol = ATA_PROT_DMA;
66 cmd->protocol = ATA_PROT_PIO;
67 if (drive->mult_count) {
68 cmd->tf_flags |= IDE_TFLAG_MULTI_PIO;
74 cmd->tf.command = ide_rw_cmds[index + lba48 + write];
78 * __ide_do_rw_disk() issues READ and WRITE commands to a disk,
79 * using LBA if supported, or CHS otherwise, to address sectors.
81 static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq,
84 ide_hwif_t *hwif = drive->hwif;
85 u16 nsectors = (u16)blk_rq_sectors(rq);
86 u8 lba48 = !!(drive->dev_flags & IDE_DFLAG_LBA48);
87 u8 dma = !!(drive->dev_flags & IDE_DFLAG_USING_DMA);
89 struct ide_taskfile *tf = &cmd.tf;
92 if ((hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) && lba48 && dma) {
93 if (block + blk_rq_sectors(rq) > 1ULL << 28)
99 memset(&cmd, 0, sizeof(cmd));
100 cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
101 cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE;
103 if (drive->dev_flags & IDE_DFLAG_LBA) {
105 pr_debug("%s: LBA=0x%012llx\n", drive->name,
106 (unsigned long long)block);
108 tf->nsect = nsectors & 0xff;
109 tf->lbal = (u8) block;
110 tf->lbam = (u8)(block >> 8);
111 tf->lbah = (u8)(block >> 16);
112 tf->device = ATA_LBA;
115 tf->nsect = (nsectors >> 8) & 0xff;
116 tf->lbal = (u8)(block >> 24);
117 if (sizeof(block) != 4) {
118 tf->lbam = (u8)((u64)block >> 32);
119 tf->lbah = (u8)((u64)block >> 40);
122 cmd.valid.out.hob = IDE_VALID_OUT_HOB;
123 cmd.valid.in.hob = IDE_VALID_IN_HOB;
124 cmd.tf_flags |= IDE_TFLAG_LBA48;
126 tf->nsect = nsectors & 0xff;
128 tf->lbam = block >>= 8;
129 tf->lbah = block >>= 8;
130 tf->device = ((block >> 8) & 0xf) | ATA_LBA;
133 unsigned int sect, head, cyl, track;
135 track = (int)block / drive->sect;
136 sect = (int)block % drive->sect + 1;
137 head = track % drive->head;
138 cyl = track / drive->head;
140 pr_debug("%s: CHS=%u/%u/%u\n", drive->name, cyl, head, sect);
142 tf->nsect = nsectors & 0xff;
149 cmd.tf_flags |= IDE_TFLAG_FS;
152 cmd.tf_flags |= IDE_TFLAG_WRITE;
154 ide_tf_set_cmd(drive, &cmd, dma);
158 ide_init_sg_cmd(&cmd, nsectors << 9);
159 ide_map_sg(drive, &cmd);
162 rc = do_rw_taskfile(drive, &cmd);
164 if (rc == ide_stopped && dma) {
165 /* fallback to PIO */
166 cmd.tf_flags |= IDE_TFLAG_DMA_PIO_FALLBACK;
167 ide_tf_set_cmd(drive, &cmd, 0);
168 ide_init_sg_cmd(&cmd, nsectors << 9);
169 rc = do_rw_taskfile(drive, &cmd);
176 * 268435455 == 137439 MB or 28bit limit
177 * 320173056 == 163929 MB or 48bit addressing
178 * 1073741822 == 549756 MB or 48bit addressing fake drive
181 static ide_startstop_t ide_do_rw_disk(ide_drive_t *drive, struct request *rq,
184 ide_hwif_t *hwif = drive->hwif;
186 BUG_ON(drive->dev_flags & IDE_DFLAG_BLOCKED);
187 BUG_ON(!blk_fs_request(rq));
189 ledtrig_ide_activity();
191 pr_debug("%s: %sing: block=%llu, sectors=%u, buffer=0x%08lx\n",
192 drive->name, rq_data_dir(rq) == READ ? "read" : "writ",
193 (unsigned long long)block, blk_rq_sectors(rq),
194 (unsigned long)rq->buffer);
197 hwif->rw_disk(drive, rq);
199 return __ide_do_rw_disk(drive, rq, block);
203 * Queries for true maximum capacity of the drive.
204 * Returns maximum LBA address (> 0) of the drive, 0 if failed.
206 static u64 idedisk_read_native_max_address(ide_drive_t *drive, int lba48)
209 struct ide_taskfile *tf = &cmd.tf;
212 memset(&cmd, 0, sizeof(cmd));
214 tf->command = ATA_CMD_READ_NATIVE_MAX_EXT;
216 tf->command = ATA_CMD_READ_NATIVE_MAX;
217 tf->device = ATA_LBA;
219 cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
220 cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE;
222 cmd.valid.out.hob = IDE_VALID_OUT_HOB;
223 cmd.valid.in.hob = IDE_VALID_IN_HOB;
224 cmd.tf_flags = IDE_TFLAG_LBA48;
227 ide_no_data_taskfile(drive, &cmd);
229 /* if OK, compute maximum address value */
230 if (!(tf->status & ATA_ERR))
231 addr = ide_get_lba_addr(&cmd, lba48) + 1;
237 * Sets maximum virtual LBA address of the drive.
238 * Returns new maximum virtual LBA address (> 0) or 0 on failure.
240 static u64 idedisk_set_max_address(ide_drive_t *drive, u64 addr_req, int lba48)
243 struct ide_taskfile *tf = &cmd.tf;
248 memset(&cmd, 0, sizeof(cmd));
249 tf->lbal = (addr_req >> 0) & 0xff;
250 tf->lbam = (addr_req >>= 8) & 0xff;
251 tf->lbah = (addr_req >>= 8) & 0xff;
253 cmd.hob.lbal = (addr_req >>= 8) & 0xff;
254 cmd.hob.lbam = (addr_req >>= 8) & 0xff;
255 cmd.hob.lbah = (addr_req >>= 8) & 0xff;
256 tf->command = ATA_CMD_SET_MAX_EXT;
258 tf->device = (addr_req >>= 8) & 0x0f;
259 tf->command = ATA_CMD_SET_MAX;
261 tf->device |= ATA_LBA;
263 cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
264 cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE;
266 cmd.valid.out.hob = IDE_VALID_OUT_HOB;
267 cmd.valid.in.hob = IDE_VALID_IN_HOB;
268 cmd.tf_flags = IDE_TFLAG_LBA48;
271 ide_no_data_taskfile(drive, &cmd);
273 /* if OK, compute maximum address value */
274 if (!(tf->status & ATA_ERR))
275 addr_set = ide_get_lba_addr(&cmd, lba48) + 1;
280 static unsigned long long sectors_to_MB(unsigned long long n)
282 n <<= 9; /* make it bytes */
283 do_div(n, 1000000); /* make it MB */
288 * Some disks report total number of sectors instead of
289 * maximum sector address. We list them here.
291 static const struct drive_list_entry hpa_list[] = {
292 { "ST340823A", NULL },
293 { "ST320413A", NULL },
294 { "ST310211A", NULL },
298 static u64 ide_disk_hpa_get_native_capacity(ide_drive_t *drive, int lba48)
300 u64 capacity, set_max;
302 capacity = drive->capacity64;
303 set_max = idedisk_read_native_max_address(drive, lba48);
305 if (ide_in_drive_list(drive->id, hpa_list)) {
307 * Since we are inclusive wrt to firmware revisions do this
308 * extra check and apply the workaround only when needed.
310 if (set_max == capacity + 1)
317 static u64 ide_disk_hpa_set_capacity(ide_drive_t *drive, u64 set_max, int lba48)
319 set_max = idedisk_set_max_address(drive, set_max, lba48);
321 drive->capacity64 = set_max;
326 static void idedisk_check_hpa(ide_drive_t *drive)
328 u64 capacity, set_max;
329 int lba48 = ata_id_lba48_enabled(drive->id);
331 capacity = drive->capacity64;
332 set_max = ide_disk_hpa_get_native_capacity(drive, lba48);
334 if (set_max <= capacity)
337 drive->probed_capacity = set_max;
339 printk(KERN_INFO "%s: Host Protected Area detected.\n"
340 "\tcurrent capacity is %llu sectors (%llu MB)\n"
341 "\tnative capacity is %llu sectors (%llu MB)\n",
343 capacity, sectors_to_MB(capacity),
344 set_max, sectors_to_MB(set_max));
346 if ((drive->dev_flags & IDE_DFLAG_NOHPA) == 0)
349 set_max = ide_disk_hpa_set_capacity(drive, set_max, lba48);
351 printk(KERN_INFO "%s: Host Protected Area disabled.\n",
355 static int ide_disk_get_capacity(ide_drive_t *drive)
360 if (ata_id_lba48_enabled(id)) {
361 /* drive speaks 48-bit LBA */
363 drive->capacity64 = ata_id_u64(id, ATA_ID_LBA_CAPACITY_2);
364 } else if (ata_id_has_lba(id) && ata_id_is_lba_capacity_ok(id)) {
365 /* drive speaks 28-bit LBA */
367 drive->capacity64 = ata_id_u32(id, ATA_ID_LBA_CAPACITY);
369 /* drive speaks boring old 28-bit CHS */
371 drive->capacity64 = drive->cyl * drive->head * drive->sect;
374 drive->probed_capacity = drive->capacity64;
377 drive->dev_flags |= IDE_DFLAG_LBA;
380 * If this device supports the Host Protected Area feature set,
381 * then we may need to change our opinion about its capacity.
383 if (ata_id_hpa_enabled(id))
384 idedisk_check_hpa(drive);
387 /* limit drive capacity to 137GB if LBA48 cannot be used */
388 if ((drive->dev_flags & IDE_DFLAG_LBA48) == 0 &&
389 drive->capacity64 > 1ULL << 28) {
390 printk(KERN_WARNING "%s: cannot use LBA48 - full capacity "
391 "%llu sectors (%llu MB)\n",
392 drive->name, (unsigned long long)drive->capacity64,
393 sectors_to_MB(drive->capacity64));
394 drive->probed_capacity = drive->capacity64 = 1ULL << 28;
397 if ((drive->hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) &&
398 (drive->dev_flags & IDE_DFLAG_LBA48)) {
399 if (drive->capacity64 > 1ULL << 28) {
400 printk(KERN_INFO "%s: cannot use LBA48 DMA - PIO mode"
401 " will be used for accessing sectors "
402 "> %u\n", drive->name, 1 << 28);
404 drive->dev_flags &= ~IDE_DFLAG_LBA48;
410 static u64 ide_disk_set_capacity(ide_drive_t *drive, u64 capacity)
412 u64 set = min(capacity, drive->probed_capacity);
414 int lba48 = ata_id_lba48_enabled(id);
416 if ((drive->dev_flags & IDE_DFLAG_LBA) == 0 ||
417 ata_id_hpa_enabled(id) == 0)
421 * according to the spec the SET MAX ADDRESS command shall be
422 * immediately preceded by a READ NATIVE MAX ADDRESS command
424 capacity = ide_disk_hpa_get_native_capacity(drive, lba48);
428 set = ide_disk_hpa_set_capacity(drive, set, lba48);
430 /* needed for ->resume to disable HPA */
431 drive->dev_flags |= IDE_DFLAG_NOHPA;
435 return drive->capacity64;
438 static void idedisk_prepare_flush(struct request_queue *q, struct request *rq)
440 ide_drive_t *drive = q->queuedata;
441 struct ide_cmd *cmd = kmalloc(sizeof(*cmd), GFP_ATOMIC);
443 /* FIXME: map struct ide_taskfile on rq->cmd[] */
446 memset(cmd, 0, sizeof(*cmd));
447 if (ata_id_flush_ext_enabled(drive->id) &&
448 (drive->capacity64 >= (1UL << 28)))
449 cmd->tf.command = ATA_CMD_FLUSH_EXT;
451 cmd->tf.command = ATA_CMD_FLUSH;
452 cmd->valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
453 cmd->tf_flags = IDE_TFLAG_DYN;
454 cmd->protocol = ATA_PROT_NODATA;
456 rq->cmd_type = REQ_TYPE_ATA_TASKFILE;
461 ide_devset_get(multcount, mult_count);
464 * This is tightly woven into the driver->do_special can not touch.
465 * DON'T do it again until a total personality rewrite is committed.
467 static int set_multcount(ide_drive_t *drive, int arg)
472 if (arg < 0 || arg > (drive->id[ATA_ID_MAX_MULTSECT] & 0xff))
475 if (drive->special_flags & IDE_SFLAG_SET_MULTMODE)
478 rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
479 rq->cmd_type = REQ_TYPE_ATA_TASKFILE;
481 drive->mult_req = arg;
482 drive->special_flags |= IDE_SFLAG_SET_MULTMODE;
483 error = blk_execute_rq(drive->queue, NULL, rq, 0);
486 return (drive->mult_count == arg) ? 0 : -EIO;
489 ide_devset_get_flag(nowerr, IDE_DFLAG_NOWERR);
491 static int set_nowerr(ide_drive_t *drive, int arg)
493 if (arg < 0 || arg > 1)
497 drive->dev_flags |= IDE_DFLAG_NOWERR;
499 drive->dev_flags &= ~IDE_DFLAG_NOWERR;
501 drive->bad_wstat = arg ? BAD_R_STAT : BAD_W_STAT;
506 static int ide_do_setfeature(ide_drive_t *drive, u8 feature, u8 nsect)
510 memset(&cmd, 0, sizeof(cmd));
511 cmd.tf.feature = feature;
512 cmd.tf.nsect = nsect;
513 cmd.tf.command = ATA_CMD_SET_FEATURES;
514 cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
515 cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE;
517 return ide_no_data_taskfile(drive, &cmd);
520 static void update_ordered(ide_drive_t *drive)
523 unsigned ordered = QUEUE_ORDERED_NONE;
524 prepare_flush_fn *prep_fn = NULL;
526 if (drive->dev_flags & IDE_DFLAG_WCACHE) {
527 unsigned long long capacity;
530 * We must avoid issuing commands a drive does not
531 * understand or we may crash it. We check flush cache
532 * is supported. We also check we have the LBA48 flush
533 * cache if the drive capacity is too large. By this
534 * time we have trimmed the drive capacity if LBA48 is
535 * not available so we don't need to recheck that.
537 capacity = ide_gd_capacity(drive);
538 barrier = ata_id_flush_enabled(id) &&
539 (drive->dev_flags & IDE_DFLAG_NOFLUSH) == 0 &&
540 ((drive->dev_flags & IDE_DFLAG_LBA48) == 0 ||
541 capacity <= (1ULL << 28) ||
542 ata_id_flush_ext_enabled(id));
544 printk(KERN_INFO "%s: cache flushes %ssupported\n",
545 drive->name, barrier ? "" : "not ");
548 ordered = QUEUE_ORDERED_DRAIN_FLUSH;
549 prep_fn = idedisk_prepare_flush;
552 ordered = QUEUE_ORDERED_DRAIN;
554 blk_queue_ordered(drive->queue, ordered, prep_fn);
557 ide_devset_get_flag(wcache, IDE_DFLAG_WCACHE);
559 static int set_wcache(ide_drive_t *drive, int arg)
563 if (arg < 0 || arg > 1)
566 if (ata_id_flush_enabled(drive->id)) {
567 err = ide_do_setfeature(drive,
568 arg ? SETFEATURES_WC_ON : SETFEATURES_WC_OFF, 0);
571 drive->dev_flags |= IDE_DFLAG_WCACHE;
573 drive->dev_flags &= ~IDE_DFLAG_WCACHE;
577 update_ordered(drive);
582 static int do_idedisk_flushcache(ide_drive_t *drive)
586 memset(&cmd, 0, sizeof(cmd));
587 if (ata_id_flush_ext_enabled(drive->id))
588 cmd.tf.command = ATA_CMD_FLUSH_EXT;
590 cmd.tf.command = ATA_CMD_FLUSH;
591 cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
592 cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE;
594 return ide_no_data_taskfile(drive, &cmd);
597 ide_devset_get(acoustic, acoustic);
599 static int set_acoustic(ide_drive_t *drive, int arg)
601 if (arg < 0 || arg > 254)
604 ide_do_setfeature(drive,
605 arg ? SETFEATURES_AAM_ON : SETFEATURES_AAM_OFF, arg);
607 drive->acoustic = arg;
612 ide_devset_get_flag(addressing, IDE_DFLAG_LBA48);
618 * 2: 48-bit capable doing 28-bit
620 static int set_addressing(ide_drive_t *drive, int arg)
622 if (arg < 0 || arg > 2)
625 if (arg && ((drive->hwif->host_flags & IDE_HFLAG_NO_LBA48) ||
626 ata_id_lba48_enabled(drive->id) == 0))
633 drive->dev_flags |= IDE_DFLAG_LBA48;
635 drive->dev_flags &= ~IDE_DFLAG_LBA48;
640 ide_ext_devset_rw(acoustic, acoustic);
641 ide_ext_devset_rw(address, addressing);
642 ide_ext_devset_rw(multcount, multcount);
643 ide_ext_devset_rw(wcache, wcache);
645 ide_ext_devset_rw_sync(nowerr, nowerr);
647 static int ide_disk_check(ide_drive_t *drive, const char *s)
652 static void ide_disk_setup(ide_drive_t *drive)
654 struct ide_disk_obj *idkp = drive->driver_data;
655 struct request_queue *q = drive->queue;
656 ide_hwif_t *hwif = drive->hwif;
658 char *m = (char *)&id[ATA_ID_PROD];
659 unsigned long long capacity;
661 ide_proc_register_driver(drive, idkp->driver);
663 if ((drive->dev_flags & IDE_DFLAG_ID_READ) == 0)
666 if (drive->dev_flags & IDE_DFLAG_REMOVABLE) {
668 * Removable disks (eg. SYQUEST); ignore 'WD' drives
670 if (m[0] != 'W' || m[1] != 'D')
671 drive->dev_flags |= IDE_DFLAG_DOORLOCKING;
674 (void)set_addressing(drive, 1);
676 if (drive->dev_flags & IDE_DFLAG_LBA48) {
679 if (max_s > hwif->rqsize)
680 max_s = hwif->rqsize;
682 blk_queue_max_sectors(q, max_s);
685 printk(KERN_INFO "%s: max request size: %dKiB\n", drive->name,
686 queue_max_sectors(q) / 2);
688 if (ata_id_is_ssd(id))
689 queue_flag_set_unlocked(QUEUE_FLAG_NONROT, q);
691 /* calculate drive capacity, and select LBA if possible */
692 ide_disk_get_capacity(drive);
695 * if possible, give fdisk access to more of the drive,
696 * by correcting bios_cyls:
698 capacity = ide_gd_capacity(drive);
700 if ((drive->dev_flags & IDE_DFLAG_FORCED_GEOM) == 0) {
701 if (ata_id_lba48_enabled(drive->id)) {
703 drive->bios_sect = 63;
704 drive->bios_head = 255;
707 if (drive->bios_sect && drive->bios_head) {
708 unsigned int cap0 = capacity; /* truncate to 32 bits */
709 unsigned int cylsz, cyl;
711 if (cap0 != capacity)
712 drive->bios_cyl = 65535;
714 cylsz = drive->bios_sect * drive->bios_head;
718 if (cyl > drive->bios_cyl)
719 drive->bios_cyl = cyl;
723 printk(KERN_INFO "%s: %llu sectors (%llu MB)",
724 drive->name, capacity, sectors_to_MB(capacity));
726 /* Only print cache size when it was specified */
727 if (id[ATA_ID_BUF_SIZE])
728 printk(KERN_CONT " w/%dKiB Cache", id[ATA_ID_BUF_SIZE] / 2);
730 printk(KERN_CONT ", CHS=%d/%d/%d\n",
731 drive->bios_cyl, drive->bios_head, drive->bios_sect);
733 /* write cache enabled? */
734 if ((id[ATA_ID_CSFO] & 1) || ata_id_wcache_enabled(id))
735 drive->dev_flags |= IDE_DFLAG_WCACHE;
737 set_wcache(drive, 1);
739 if ((drive->dev_flags & IDE_DFLAG_LBA) == 0 &&
740 (drive->head == 0 || drive->head > 16)) {
741 printk(KERN_ERR "%s: invalid geometry: %d physical heads?\n",
742 drive->name, drive->head);
743 drive->dev_flags &= ~IDE_DFLAG_ATTACH;
745 drive->dev_flags |= IDE_DFLAG_ATTACH;
748 static void ide_disk_flush(ide_drive_t *drive)
750 if (ata_id_flush_enabled(drive->id) == 0 ||
751 (drive->dev_flags & IDE_DFLAG_WCACHE) == 0)
754 if (do_idedisk_flushcache(drive))
755 printk(KERN_INFO "%s: wcache flush failed!\n", drive->name);
758 static int ide_disk_init_media(ide_drive_t *drive, struct gendisk *disk)
763 static int ide_disk_set_doorlock(ide_drive_t *drive, struct gendisk *disk,
769 if ((drive->dev_flags & IDE_DFLAG_DOORLOCKING) == 0)
772 memset(&cmd, 0, sizeof(cmd));
773 cmd.tf.command = on ? ATA_CMD_MEDIA_LOCK : ATA_CMD_MEDIA_UNLOCK;
774 cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
775 cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE;
777 ret = ide_no_data_taskfile(drive, &cmd);
780 drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING;
785 const struct ide_disk_ops ide_ata_disk_ops = {
786 .check = ide_disk_check,
787 .set_capacity = ide_disk_set_capacity,
788 .get_capacity = ide_disk_get_capacity,
789 .setup = ide_disk_setup,
790 .flush = ide_disk_flush,
791 .init_media = ide_disk_init_media,
792 .set_doorlock = ide_disk_set_doorlock,
793 .do_request = ide_do_rw_disk,
794 .ioctl = ide_disk_ioctl,