drivers/hwmon/w83793.c

   1 /*
   2  * w83793.c - Linux kernel driver for hardware monitoring
   3  * Copyright (C) 2006 Winbond Electronics Corp.
   4  *            Yuan Mu
   5  *            Rudolf Marek <r.marek@assembler.cz>
   6  * Copyright (C) 2009-2010 Sven Anders <anders@anduras.de>, ANDURAS AG.
   7  *              Watchdog driver part
   8  *              (Based partially on fschmd driver,
   9  *               Copyright 2007-2008 by Hans de Goede)
  10  *
  11  * This program is free software; you can redistribute it and/or modify
  12  * it under the terms of the GNU General Public License as published by
  13  * the Free Software Foundation - version 2.
  14  *
  15  * This program is distributed in the hope that it will be useful,
  16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  * GNU General Public License for more details.
  19  *
  20  * You should have received a copy of the GNU General Public License
  21  * along with this program; if not, write to the Free Software
  22  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
  23  * 02110-1301 USA.
  24  */
  25
  26 /*
  27  * Supports following chips:
  28  *
  29  * Chip #vin    #fanin  #pwm    #temp   wchipid vendid  i2c     ISA
  30  * w83793       10      12      8       6       0x7b    0x5ca3  yes     no
  31  */
  32
  33 #include <linux/module.h>
  34 #include <linux/init.h>
  35 #include <linux/slab.h>
  36 #include <linux/i2c.h>
  37 #include <linux/hwmon.h>
  38 #include <linux/hwmon-vid.h>
  39 #include <linux/hwmon-sysfs.h>
  40 #include <linux/err.h>
  41 #include <linux/mutex.h>
  42 #include <linux/fs.h>
  43 #include <linux/watchdog.h>
  44 #include <linux/miscdevice.h>
  45 #include <linux/uaccess.h>
  46 #include <linux/kref.h>
  47 #include <linux/notifier.h>
  48 #include <linux/reboot.h>
  49
  50 /* Default values */
  51 #define WATCHDOG_TIMEOUT 2      /* 2 minute default timeout */
  52
  53 /* Addresses to scan */
  54 static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f,
  55                                                 I2C_CLIENT_END };
  56
  57 /* Insmod parameters */
  58
  59 static unsigned short force_subclients[4];
  60 module_param_array(force_subclients, short, NULL, 0);
  61 MODULE_PARM_DESC(force_subclients, "List of subclient addresses: "
  62                        "{bus, clientaddr, subclientaddr1, subclientaddr2}");
  63
  64 static bool reset;
  65 module_param(reset, bool, 0);
  66 MODULE_PARM_DESC(reset, "Set to 1 to reset chip, not recommended");
  67
  68 static int timeout = WATCHDOG_TIMEOUT;  /* default timeout in minutes */
  69 module_param(timeout, int, 0);
  70 MODULE_PARM_DESC(timeout,
  71         "Watchdog timeout in minutes. 2<= timeout <=255 (default="
  72                                 __MODULE_STRING(WATCHDOG_TIMEOUT) ")");
  73
  74 static bool nowayout = WATCHDOG_NOWAYOUT;
  75 module_param(nowayout, bool, 0);
  76 MODULE_PARM_DESC(nowayout,
  77         "Watchdog cannot be stopped once started (default="
  78                                 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
  79
  80 /*
  81  * Address 0x00, 0x0d, 0x0e, 0x0f in all three banks are reserved
  82  * as ID, Bank Select registers
  83  */
  84 #define W83793_REG_BANKSEL              0x00
  85 #define W83793_REG_VENDORID             0x0d
  86 #define W83793_REG_CHIPID               0x0e
  87 #define W83793_REG_DEVICEID             0x0f
  88
  89 #define W83793_REG_CONFIG               0x40
  90 #define W83793_REG_MFC                  0x58
  91 #define W83793_REG_FANIN_CTRL           0x5c
  92 #define W83793_REG_FANIN_SEL            0x5d
  93 #define W83793_REG_I2C_ADDR             0x0b
  94 #define W83793_REG_I2C_SUBADDR          0x0c
  95 #define W83793_REG_VID_INA              0x05
  96 #define W83793_REG_VID_INB              0x06
  97 #define W83793_REG_VID_LATCHA           0x07
  98 #define W83793_REG_VID_LATCHB           0x08
  99 #define W83793_REG_VID_CTRL             0x59
 100
 101 #define W83793_REG_WDT_LOCK             0x01
 102 #define W83793_REG_WDT_ENABLE           0x02
 103 #define W83793_REG_WDT_STATUS           0x03
 104 #define W83793_REG_WDT_TIMEOUT          0x04
 105
 106 static u16 W83793_REG_TEMP_MODE[2] = { 0x5e, 0x5f };
 107
 108 #define TEMP_READ       0
 109 #define TEMP_CRIT       1
 110 #define TEMP_CRIT_HYST  2
 111 #define TEMP_WARN       3
 112 #define TEMP_WARN_HYST  4
 113 /*
 114  * only crit and crit_hyst affect real-time alarm status
 115  * current crit crit_hyst warn warn_hyst
 116  */
 117 static u16 W83793_REG_TEMP[][5] = {
 118         {0x1c, 0x78, 0x79, 0x7a, 0x7b},
 119         {0x1d, 0x7c, 0x7d, 0x7e, 0x7f},
 120         {0x1e, 0x80, 0x81, 0x82, 0x83},
 121         {0x1f, 0x84, 0x85, 0x86, 0x87},
 122         {0x20, 0x88, 0x89, 0x8a, 0x8b},
 123         {0x21, 0x8c, 0x8d, 0x8e, 0x8f},
 124 };
 125
 126 #define W83793_REG_TEMP_LOW_BITS        0x22
 127
 128 #define W83793_REG_BEEP(index)          (0x53 + (index))
 129 #define W83793_REG_ALARM(index)         (0x4b + (index))
 130
 131 #define W83793_REG_CLR_CHASSIS          0x4a    /* SMI MASK4 */
 132 #define W83793_REG_IRQ_CTRL             0x50
 133 #define W83793_REG_OVT_CTRL             0x51
 134 #define W83793_REG_OVT_BEEP             0x52
 135
 136 #define IN_READ                         0
 137 #define IN_MAX                          1
 138 #define IN_LOW                          2
 139 static const u16 W83793_REG_IN[][3] = {
 140         /* Current, High, Low */
 141         {0x10, 0x60, 0x61},     /* Vcore A      */
 142         {0x11, 0x62, 0x63},     /* Vcore B      */
 143         {0x12, 0x64, 0x65},     /* Vtt          */
 144         {0x14, 0x6a, 0x6b},     /* VSEN1        */
 145         {0x15, 0x6c, 0x6d},     /* VSEN2        */
 146         {0x16, 0x6e, 0x6f},     /* +3VSEN       */
 147         {0x17, 0x70, 0x71},     /* +12VSEN      */
 148         {0x18, 0x72, 0x73},     /* 5VDD         */
 149         {0x19, 0x74, 0x75},     /* 5VSB         */
 150         {0x1a, 0x76, 0x77},     /* VBAT         */
 151 };
 152
 153 /* Low Bits of Vcore A/B Vtt Read/High/Low */
 154 static const u16 W83793_REG_IN_LOW_BITS[] = { 0x1b, 0x68, 0x69 };
 155 static u8 scale_in[] = { 2, 2, 2, 16, 16, 16, 8, 24, 24, 16 };
 156 static u8 scale_in_add[] = { 0, 0, 0, 0, 0, 0, 0, 150, 150, 0 };
 157
 158 #define W83793_REG_FAN(index)           (0x23 + 2 * (index))    /* High byte */
 159 #define W83793_REG_FAN_MIN(index)       (0x90 + 2 * (index))    /* High byte */
 160
 161 #define W83793_REG_PWM_DEFAULT          0xb2
 162 #define W83793_REG_PWM_ENABLE           0x207
 163 #define W83793_REG_PWM_UPTIME           0xc3    /* Unit in 0.1 second */
 164 #define W83793_REG_PWM_DOWNTIME         0xc4    /* Unit in 0.1 second */
 165 #define W83793_REG_TEMP_CRITICAL        0xc5
 166
 167 #define PWM_DUTY                        0
 168 #define PWM_START                       1
 169 #define PWM_NONSTOP                     2
 170 #define PWM_STOP_TIME                   3
 171 #define W83793_REG_PWM(index, nr)       (((nr) == 0 ? 0xb3 : \
 172                                          (nr) == 1 ? 0x220 : 0x218) + (index))
 173
 174 /* bit field, fan1 is bit0, fan2 is bit1 ... */
 175 #define W83793_REG_TEMP_FAN_MAP(index)  (0x201 + (index))
 176 #define W83793_REG_TEMP_TOL(index)      (0x208 + (index))
 177 #define W83793_REG_TEMP_CRUISE(index)   (0x210 + (index))
 178 #define W83793_REG_PWM_STOP_TIME(index) (0x228 + (index))
 179 #define W83793_REG_SF2_TEMP(index, nr)  (0x230 + ((index) << 4) + (nr))
 180 #define W83793_REG_SF2_PWM(index, nr)   (0x238 + ((index) << 4) + (nr))
 181
 182 static inline unsigned long FAN_FROM_REG(u16 val)
 183 {
 184         if ((val >= 0xfff) || (val == 0))
 185                 return  0;
 186         return 1350000UL / val;
 187 }
 188
 189 static inline u16 FAN_TO_REG(long rpm)
 190 {
 191         if (rpm <= 0)
 192                 return 0x0fff;
 193         return SENSORS_LIMIT((1350000 + (rpm >> 1)) / rpm, 1, 0xffe);
 194 }
 195
 196 static inline unsigned long TIME_FROM_REG(u8 reg)
 197 {
 198         return reg * 100;
 199 }
 200
 201 static inline u8 TIME_TO_REG(unsigned long val)
 202 {
 203         return SENSORS_LIMIT((val + 50) / 100, 0, 0xff);
 204 }
 205
 206 static inline long TEMP_FROM_REG(s8 reg)
 207 {
 208         return reg * 1000;
 209 }
 210
 211 static inline s8 TEMP_TO_REG(long val, s8 min, s8 max)
 212 {
 213         return SENSORS_LIMIT((val + (val < 0 ? -500 : 500)) / 1000, min, max);
 214 }
 215
 216 struct w83793_data {
 217         struct i2c_client *lm75[2];
 218         struct device *hwmon_dev;
 219         struct mutex update_lock;
 220         char valid;                     /* !=0 if following fields are valid */
 221         unsigned long last_updated;     /* In jiffies */
 222         unsigned long last_nonvolatile; /* In jiffies, last time we update the
 223                                          * nonvolatile registers
 224                                          */
 225
 226         u8 bank;
 227         u8 vrm;
 228         u8 vid[2];
 229         u8 in[10][3];           /* Register value, read/high/low */
 230         u8 in_low_bits[3];      /* Additional resolution for VCore A/B Vtt */
 231
 232         u16 has_fan;            /* Only fan1- fan5 has own pins */
 233         u16 fan[12];            /* Register value combine */
 234         u16 fan_min[12];        /* Register value combine */
 235
 236         s8 temp[6][5];          /* current, crit, crit_hyst,warn, warn_hyst */
 237         u8 temp_low_bits;       /* Additional resolution TD1-TD4 */
 238         u8 temp_mode[2];        /* byte 0: Temp D1-D4 mode each has 2 bits
 239                                  * byte 1: Temp R1,R2 mode, each has 1 bit
 240                                  */
 241         u8 temp_critical;       /* If reached all fan will be at full speed */
 242         u8 temp_fan_map[6];     /* Temp controls which pwm fan, bit field */
 243
 244         u8 has_pwm;
 245         u8 has_temp;
 246         u8 has_vid;
 247         u8 pwm_enable;          /* Register value, each Temp has 1 bit */
 248         u8 pwm_uptime;          /* Register value */
 249         u8 pwm_downtime;        /* Register value */
 250         u8 pwm_default;         /* All fan default pwm, next poweron valid */
 251         u8 pwm[8][3];           /* Register value */
 252         u8 pwm_stop_time[8];
 253         u8 temp_cruise[6];
 254
 255         u8 alarms[5];           /* realtime status registers */
 256         u8 beeps[5];
 257         u8 beep_enable;
 258         u8 tolerance[3];        /* Temp tolerance(Smart Fan I/II) */
 259         u8 sf2_pwm[6][7];       /* Smart FanII: Fan duty cycle */
 260         u8 sf2_temp[6][7];      /* Smart FanII: Temp level point */
 261
 262         /* watchdog */
 263         struct i2c_client *client;
 264         struct mutex watchdog_lock;
 265         struct list_head list; /* member of the watchdog_data_list */
 266         struct kref kref;
 267         struct miscdevice watchdog_miscdev;
 268         unsigned long watchdog_is_open;
 269         char watchdog_expect_close;
 270         char watchdog_name[10]; /* must be unique to avoid sysfs conflict */
 271         unsigned int watchdog_caused_reboot;
 272         int watchdog_timeout; /* watchdog timeout in minutes */
 273 };
 274
 275 /*
 276  * Somewhat ugly :( global data pointer list with all devices, so that
 277  * we can find our device data as when using misc_register. There is no
 278  * other method to get to one's device data from the open file-op and
 279  * for usage in the reboot notifier callback.
 280  */
 281 static LIST_HEAD(watchdog_data_list);
 282
 283 /* Note this lock not only protect list access, but also data.kref access */
 284 static DEFINE_MUTEX(watchdog_data_mutex);
 285
 286 /*
 287  * Release our data struct when we're detached from the i2c client *and* all
 288  * references to our watchdog device are released
 289  */
 290 static void w83793_release_resources(struct kref *ref)
 291 {
 292         struct w83793_data *data = container_of(ref, struct w83793_data, kref);
 293         kfree(data);
 294 }
 295
 296 static u8 w83793_read_value(struct i2c_client *client, u16 reg);
 297 static int w83793_write_value(struct i2c_client *client, u16 reg, u8 value);
 298 static int w83793_probe(struct i2c_client *client,
 299                         const struct i2c_device_id *id);
 300 static int w83793_detect(struct i2c_client *client,
 301                          struct i2c_board_info *info);
 302 static int w83793_remove(struct i2c_client *client);
 303 static void w83793_init_client(struct i2c_client *client);
 304 static void w83793_update_nonvolatile(struct device *dev);
 305 static struct w83793_data *w83793_update_device(struct device *dev);
 306
 307 static const struct i2c_device_id w83793_id[] = {
 308         { "w83793", 0 },
 309         { }
 310 };
 311 MODULE_DEVICE_TABLE(i2c, w83793_id);
 312
 313 static struct i2c_driver w83793_driver = {
 314         .class          = I2C_CLASS_HWMON,
 315         .driver = {
 316                    .name = "w83793",
 317         },
 318         .probe          = w83793_probe,
 319         .remove         = w83793_remove,
 320         .id_table       = w83793_id,
 321         .detect         = w83793_detect,
 322         .address_list   = normal_i2c,
 323 };
 324
 325 static ssize_t
 326 show_vrm(struct device *dev, struct device_attribute *attr, char *buf)
 327 {
 328         struct w83793_data *data = dev_get_drvdata(dev);
 329         return sprintf(buf, "%d\n", data->vrm);
 330 }
 331
 332 static ssize_t
 333 show_vid(struct device *dev, struct device_attribute *attr, char *buf)
 334 {
 335         struct w83793_data *data = w83793_update_device(dev);
 336         struct sensor_device_attribute_2 *sensor_attr =
 337             to_sensor_dev_attr_2(attr);
 338         int index = sensor_attr->index;
 339
 340         return sprintf(buf, "%d\n", vid_from_reg(data->vid[index], data->vrm));
 341 }
 342
 343 static ssize_t
 344 store_vrm(struct device *dev, struct device_attribute *attr,
 345           const char *buf, size_t count)
 346 {
 347         struct w83793_data *data = dev_get_drvdata(dev);
 348         unsigned long val;
 349         int err;
 350
 351         err = kstrtoul(buf, 10, &val);
 352         if (err)
 353                 return err;
 354
 355         data->vrm = val;
 356         return count;
 357 }
 358
 359 #define ALARM_STATUS                    0
 360 #define BEEP_ENABLE                     1
 361 static ssize_t
 362 show_alarm_beep(struct device *dev, struct device_attribute *attr, char *buf)
 363 {
 364         struct w83793_data *data = w83793_update_device(dev);
 365         struct sensor_device_attribute_2 *sensor_attr =
 366             to_sensor_dev_attr_2(attr);
 367         int nr = sensor_attr->nr;
 368         int index = sensor_attr->index >> 3;
 369         int bit = sensor_attr->index & 0x07;
 370         u8 val;
 371
 372         if (nr == ALARM_STATUS) {
 373                 val = (data->alarms[index] >> (bit)) & 1;
 374         } else {                /* BEEP_ENABLE */
 375                 val = (data->beeps[index] >> (bit)) & 1;
 376         }
 377
 378         return sprintf(buf, "%u\n", val);
 379 }
 380
 381 static ssize_t
 382 store_beep(struct device *dev, struct device_attribute *attr,
 383            const char *buf, size_t count)
 384 {
 385         struct i2c_client *client = to_i2c_client(dev);
 386         struct w83793_data *data = i2c_get_clientdata(client);
 387         struct sensor_device_attribute_2 *sensor_attr =
 388             to_sensor_dev_attr_2(attr);
 389         int index = sensor_attr->index >> 3;
 390         int shift = sensor_attr->index & 0x07;
 391         u8 beep_bit = 1 << shift;
 392         unsigned long val;
 393         int err;
 394
 395         err = kstrtoul(buf, 10, &val);
 396         if (err)
 397                 return err;
 398
 399         if (val > 1)
 400                 return -EINVAL;
 401
 402         mutex_lock(&data->update_lock);
 403         data->beeps[index] = w83793_read_value(client, W83793_REG_BEEP(index));
 404         data->beeps[index] &= ~beep_bit;
 405         data->beeps[index] |= val << shift;
 406         w83793_write_value(client, W83793_REG_BEEP(index), data->beeps[index]);
 407         mutex_unlock(&data->update_lock);
 408
 409         return count;
 410 }
 411
 412 static ssize_t
 413 show_beep_enable(struct device *dev, struct device_attribute *attr, char *buf)
 414 {
 415         struct w83793_data *data = w83793_update_device(dev);
 416         return sprintf(buf, "%u\n", (data->beep_enable >> 1) & 0x01);
 417 }
 418
 419 static ssize_t
 420 store_beep_enable(struct device *dev, struct device_attribute *attr,
 421                   const char *buf, size_t count)
 422 {
 423         struct i2c_client *client = to_i2c_client(dev);
 424         struct w83793_data *data = i2c_get_clientdata(client);
 425         unsigned long val;
 426         int err;
 427
 428         err = kstrtoul(buf, 10, &val);
 429         if (err)
 430                 return err;
 431
 432         if (val > 1)
 433                 return -EINVAL;
 434
 435         mutex_lock(&data->update_lock);
 436         data->beep_enable = w83793_read_value(client, W83793_REG_OVT_BEEP)
 437                             & 0xfd;
 438         data->beep_enable |= val << 1;
 439         w83793_write_value(client, W83793_REG_OVT_BEEP, data->beep_enable);
 440         mutex_unlock(&data->update_lock);
 441
 442         return count;
 443 }
 444
 445 /* Write any value to clear chassis alarm */
 446 static ssize_t
 447 store_chassis_clear_legacy(struct device *dev,
 448                            struct device_attribute *attr, const char *buf,
 449                            size_t count)
 450 {
 451         struct i2c_client *client = to_i2c_client(dev);
 452         struct w83793_data *data = i2c_get_clientdata(client);
 453         u8 val;
 454
 455         dev_warn(dev, "Attribute chassis is deprecated, "
 456                  "use intrusion0_alarm instead\n");
 457
 458         mutex_lock(&data->update_lock);
 459         val = w83793_read_value(client, W83793_REG_CLR_CHASSIS);
 460         val |= 0x80;
 461         w83793_write_value(client, W83793_REG_CLR_CHASSIS, val);
 462         mutex_unlock(&data->update_lock);
 463         return count;
 464 }
 465
 466 /* Write 0 to clear chassis alarm */
 467 static ssize_t
 468 store_chassis_clear(struct device *dev,
 469                     struct device_attribute *attr, const char *buf,
 470                     size_t count)
 471 {
 472         struct i2c_client *client = to_i2c_client(dev);
 473         struct w83793_data *data = i2c_get_clientdata(client);
 474         unsigned long val;
 475         u8 reg;
 476         int err;
 477
 478         err = kstrtoul(buf, 10, &val);
 479         if (err)
 480                 return err;
 481         if (val)
 482                 return -EINVAL;
 483
 484         mutex_lock(&data->update_lock);
 485         reg = w83793_read_value(client, W83793_REG_CLR_CHASSIS);
 486         w83793_write_value(client, W83793_REG_CLR_CHASSIS, reg | 0x80);
 487         data->valid = 0;                /* Force cache refresh */
 488         mutex_unlock(&data->update_lock);
 489         return count;
 490 }
 491
 492 #define FAN_INPUT                       0
 493 #define FAN_MIN                         1
 494 static ssize_t
 495 show_fan(struct device *dev, struct device_attribute *attr, char *buf)
 496 {
 497         struct sensor_device_attribute_2 *sensor_attr =
 498             to_sensor_dev_attr_2(attr);
 499         int nr = sensor_attr->nr;
 500         int index = sensor_attr->index;
 501         struct w83793_data *data = w83793_update_device(dev);
 502         u16 val;
 503
 504         if (nr == FAN_INPUT)
 505                 val = data->fan[index] & 0x0fff;
 506         else
 507                 val = data->fan_min[index] & 0x0fff;
 508
 509         return sprintf(buf, "%lu\n", FAN_FROM_REG(val));
 510 }
 511
 512 static ssize_t
 513 store_fan_min(struct device *dev, struct device_attribute *attr,
 514               const char *buf, size_t count)
 515 {
 516         struct sensor_device_attribute_2 *sensor_attr =
 517             to_sensor_dev_attr_2(attr);
 518         int index = sensor_attr->index;
 519         struct i2c_client *client = to_i2c_client(dev);
 520         struct w83793_data *data = i2c_get_clientdata(client);
 521         unsigned long val;
 522         int err;
 523
 524         err = kstrtoul(buf, 10, &val);
 525         if (err)
 526                 return err;
 527         val = FAN_TO_REG(val);
 528
 529         mutex_lock(&data->update_lock);
 530         data->fan_min[index] = val;
 531         w83793_write_value(client, W83793_REG_FAN_MIN(index),
 532                            (val >> 8) & 0xff);
 533         w83793_write_value(client, W83793_REG_FAN_MIN(index) + 1, val & 0xff);
 534         mutex_unlock(&data->update_lock);
 535
 536         return count;
 537 }
 538
 539 static ssize_t
 540 show_pwm(struct device *dev, struct device_attribute *attr, char *buf)
 541 {
 542         struct sensor_device_attribute_2 *sensor_attr =
 543             to_sensor_dev_attr_2(attr);
 544         struct w83793_data *data = w83793_update_device(dev);
 545         u16 val;
 546         int nr = sensor_attr->nr;
 547         int index = sensor_attr->index;
 548
 549         if (nr == PWM_STOP_TIME)
 550                 val = TIME_FROM_REG(data->pwm_stop_time[index]);
 551         else
 552                 val = (data->pwm[index][nr] & 0x3f) << 2;
 553
 554         return sprintf(buf, "%d\n", val);
 555 }
 556
 557 static ssize_t
 558 store_pwm(struct device *dev, struct device_attribute *attr,
 559           const char *buf, size_t count)
 560 {
 561         struct i2c_client *client = to_i2c_client(dev);
 562         struct w83793_data *data = i2c_get_clientdata(client);
 563         struct sensor_device_attribute_2 *sensor_attr =
 564             to_sensor_dev_attr_2(attr);
 565         int nr = sensor_attr->nr;
 566         int index = sensor_attr->index;
 567         unsigned long val;
 568         int err;
 569
 570         err = kstrtoul(buf, 10, &val);
 571         if (err)
 572                 return err;
 573
 574         mutex_lock(&data->update_lock);
 575         if (nr == PWM_STOP_TIME) {
 576                 val = TIME_TO_REG(val);
 577                 data->pwm_stop_time[index] = val;
 578                 w83793_write_value(client, W83793_REG_PWM_STOP_TIME(index),
 579                                    val);
 580         } else {
 581                 val = SENSORS_LIMIT(val, 0, 0xff) >> 2;
 582                 data->pwm[index][nr] =
 583                     w83793_read_value(client, W83793_REG_PWM(index, nr)) & 0xc0;
 584                 data->pwm[index][nr] |= val;
 585                 w83793_write_value(client, W83793_REG_PWM(index, nr),
 586                                                         data->pwm[index][nr]);
 587         }
 588
 589         mutex_unlock(&data->update_lock);
 590         return count;
 591 }
 592
 593 static ssize_t
 594 show_temp(struct device *dev, struct device_attribute *attr, char *buf)
 595 {
 596         struct sensor_device_attribute_2 *sensor_attr =
 597             to_sensor_dev_attr_2(attr);
 598         int nr = sensor_attr->nr;
 599         int index = sensor_attr->index;
 600         struct w83793_data *data = w83793_update_device(dev);
 601         long temp = TEMP_FROM_REG(data->temp[index][nr]);
 602
 603         if (nr == TEMP_READ && index < 4) {     /* Only TD1-TD4 have low bits */
 604                 int low = ((data->temp_low_bits >> (index * 2)) & 0x03) * 250;
 605                 temp += temp > 0 ? low : -low;
 606         }
 607         return sprintf(buf, "%ld\n", temp);
 608 }
 609
 610 static ssize_t
 611 store_temp(struct device *dev, struct device_attribute *attr,
 612            const char *buf, size_t count)
 613 {
 614         struct sensor_device_attribute_2 *sensor_attr =
 615             to_sensor_dev_attr_2(attr);
 616         int nr = sensor_attr->nr;
 617         int index = sensor_attr->index;
 618         struct i2c_client *client = to_i2c_client(dev);
 619         struct w83793_data *data = i2c_get_clientdata(client);
 620         long tmp;
 621         int err;
 622
 623         err = kstrtol(buf, 10, &tmp);
 624         if (err)
 625                 return err;
 626
 627         mutex_lock(&data->update_lock);
 628         data->temp[index][nr] = TEMP_TO_REG(tmp, -128, 127);
 629         w83793_write_value(client, W83793_REG_TEMP[index][nr],
 630                            data->temp[index][nr]);
 631         mutex_unlock(&data->update_lock);
 632         return count;
 633 }
 634
 635 /*
 636  * TD1-TD4
 637  * each has 4 mode:(2 bits)
 638  * 0:   Stop monitor
 639  * 1:   Use internal temp sensor(default)
 640  * 2:   Reserved
 641  * 3:   Use sensor in Intel CPU and get result by PECI
 642  *
 643  * TR1-TR2
 644  * each has 2 mode:(1 bit)
 645  * 0:   Disable temp sensor monitor
 646  * 1:   To enable temp sensors monitor
 647  */
 648
 649 /* 0 disable, 6 PECI */
 650 static u8 TO_TEMP_MODE[] = { 0, 0, 0, 6 };
 651
 652 static ssize_t
 653 show_temp_mode(struct device *dev, struct device_attribute *attr, char *buf)
 654 {
 655         struct w83793_data *data = w83793_update_device(dev);
 656         struct sensor_device_attribute_2 *sensor_attr =
 657             to_sensor_dev_attr_2(attr);
 658         int index = sensor_attr->index;
 659         u8 mask = (index < 4) ? 0x03 : 0x01;
 660         u8 shift = (index < 4) ? (2 * index) : (index - 4);
 661         u8 tmp;
 662         index = (index < 4) ? 0 : 1;
 663
 664         tmp = (data->temp_mode[index] >> shift) & mask;
 665
 666         /* for the internal sensor, found out if diode or thermistor */
 667         if (tmp == 1)
 668                 tmp = index == 0 ? 3 : 4;
 669         else
 670                 tmp = TO_TEMP_MODE[tmp];
 671
 672         return sprintf(buf, "%d\n", tmp);
 673 }
 674
 675 static ssize_t
 676 store_temp_mode(struct device *dev, struct device_attribute *attr,
 677                 const char *buf, size_t count)
 678 {
 679         struct i2c_client *client = to_i2c_client(dev);
 680         struct w83793_data *data = i2c_get_clientdata(client);
 681         struct sensor_device_attribute_2 *sensor_attr =
 682             to_sensor_dev_attr_2(attr);
 683         int index = sensor_attr->index;
 684         u8 mask = (index < 4) ? 0x03 : 0x01;
 685         u8 shift = (index < 4) ? (2 * index) : (index - 4);
 686         unsigned long val;
 687         int err;
 688
 689         err = kstrtoul(buf, 10, &val);
 690         if (err)
 691                 return err;
 692
 693         /* transform the sysfs interface values into table above */
 694         if ((val == 6) && (index < 4)) {
 695                 val -= 3;
 696         } else if ((val == 3 && index < 4)
 697                 || (val == 4 && index >= 4)) {
 698                 /* transform diode or thermistor into internal enable */
 699                 val = !!val;
 700         } else {
 701                 return -EINVAL;
 702         }
 703
 704         index = (index < 4) ? 0 : 1;
 705         mutex_lock(&data->update_lock);
 706         data->temp_mode[index] =
 707             w83793_read_value(client, W83793_REG_TEMP_MODE[index]);
 708         data->temp_mode[index] &= ~(mask << shift);
 709         data->temp_mode[index] |= val << shift;
 710         w83793_write_value(client, W83793_REG_TEMP_MODE[index],
 711                                                         data->temp_mode[index]);
 712         mutex_unlock(&data->update_lock);
 713
 714         return count;
 715 }
 716
 717 #define SETUP_PWM_DEFAULT               0
 718 #define SETUP_PWM_UPTIME                1       /* Unit in 0.1s */
 719 #define SETUP_PWM_DOWNTIME              2       /* Unit in 0.1s */
 720 #define SETUP_TEMP_CRITICAL             3
 721 static ssize_t
 722 show_sf_setup(struct device *dev, struct device_attribute *attr, char *buf)
 723 {
 724         struct sensor_device_attribute_2 *sensor_attr =
 725             to_sensor_dev_attr_2(attr);
 726         int nr = sensor_attr->nr;
 727         struct w83793_data *data = w83793_update_device(dev);
 728         u32 val = 0;
 729
 730         if (nr == SETUP_PWM_DEFAULT)
 731                 val = (data->pwm_default & 0x3f) << 2;
 732         else if (nr == SETUP_PWM_UPTIME)
 733                 val = TIME_FROM_REG(data->pwm_uptime);
 734         else if (nr == SETUP_PWM_DOWNTIME)
 735                 val = TIME_FROM_REG(data->pwm_downtime);
 736         else if (nr == SETUP_TEMP_CRITICAL)
 737                 val = TEMP_FROM_REG(data->temp_critical & 0x7f);
 738
 739         return sprintf(buf, "%d\n", val);
 740 }
 741
 742 static ssize_t
 743 store_sf_setup(struct device *dev, struct device_attribute *attr,
 744                const char *buf, size_t count)
 745 {
 746         struct sensor_device_attribute_2 *sensor_attr =
 747             to_sensor_dev_attr_2(attr);
 748         int nr = sensor_attr->nr;
 749         struct i2c_client *client = to_i2c_client(dev);
 750         struct w83793_data *data = i2c_get_clientdata(client);
 751         long val;
 752         int err;
 753
 754         err = kstrtol(buf, 10, &val);
 755         if (err)
 756                 return err;
 757
 758         mutex_lock(&data->update_lock);
 759         if (nr == SETUP_PWM_DEFAULT) {
 760                 data->pwm_default =
 761                     w83793_read_value(client, W83793_REG_PWM_DEFAULT) & 0xc0;
 762                 data->pwm_default |= SENSORS_LIMIT(val, 0, 0xff) >> 2;
 763                 w83793_write_value(client, W83793_REG_PWM_DEFAULT,
 764                                                         data->pwm_default);
 765         } else if (nr == SETUP_PWM_UPTIME) {
 766                 data->pwm_uptime = TIME_TO_REG(val);
 767                 data->pwm_uptime += data->pwm_uptime == 0 ? 1 : 0;
 768                 w83793_write_value(client, W83793_REG_PWM_UPTIME,
 769                                                         data->pwm_uptime);
 770         } else if (nr == SETUP_PWM_DOWNTIME) {
 771                 data->pwm_downtime = TIME_TO_REG(val);
 772                 data->pwm_downtime += data->pwm_downtime == 0 ? 1 : 0;
 773                 w83793_write_value(client, W83793_REG_PWM_DOWNTIME,
 774                                                         data->pwm_downtime);
 775         } else {                /* SETUP_TEMP_CRITICAL */
 776                 data->temp_critical =
 777                     w83793_read_value(client, W83793_REG_TEMP_CRITICAL) & 0x80;
 778                 data->temp_critical |= TEMP_TO_REG(val, 0, 0x7f);
 779                 w83793_write_value(client, W83793_REG_TEMP_CRITICAL,
 780                                                         data->temp_critical);
 781         }
 782
 783         mutex_unlock(&data->update_lock);
 784         return count;
 785 }
 786
 787 /*
 788  * Temp SmartFan control
 789  * TEMP_FAN_MAP
 790  * Temp channel control which pwm fan, bitfield, bit 0 indicate pwm1...
 791  * It's possible two or more temp channels control the same fan, w83793
 792  * always prefers to pick the most critical request and applies it to
 793  * the related Fan.
 794  * It's possible one fan is not in any mapping of 6 temp channels, this
 795  * means the fan is manual mode
 796  *
 797  * TEMP_PWM_ENABLE
 798  * Each temp channel has its own SmartFan mode, and temp channel
 799  * control fans that are set by TEMP_FAN_MAP
 800  * 0:   SmartFanII mode
 801  * 1:   Thermal Cruise Mode
 802  *
 803  * TEMP_CRUISE
 804  * Target temperature in thermal cruise mode, w83793 will try to turn
 805  * fan speed to keep the temperature of target device around this
 806  * temperature.
 807  *
 808  * TEMP_TOLERANCE
 809  * If Temp higher or lower than target with this tolerance, w83793
 810  * will take actions to speed up or slow down the fan to keep the
 811  * temperature within the tolerance range.
 812  */
 813
 814 #define TEMP_FAN_MAP                    0
 815 #define TEMP_PWM_ENABLE                 1
 816 #define TEMP_CRUISE                     2
 817 #define TEMP_TOLERANCE                  3
 818 static ssize_t
 819 show_sf_ctrl(struct device *dev, struct device_attribute *attr, char *buf)
 820 {
 821         struct sensor_device_attribute_2 *sensor_attr =
 822             to_sensor_dev_attr_2(attr);
 823         int nr = sensor_attr->nr;
 824         int index = sensor_attr->index;
 825         struct w83793_data *data = w83793_update_device(dev);
 826         u32 val;
 827
 828         if (nr == TEMP_FAN_MAP) {
 829                 val = data->temp_fan_map[index];
 830         } else if (nr == TEMP_PWM_ENABLE) {
 831                 /* +2 to transfrom into 2 and 3 to conform with sysfs intf */
 832                 val = ((data->pwm_enable >> index) & 0x01) + 2;
 833         } else if (nr == TEMP_CRUISE) {
 834                 val = TEMP_FROM_REG(data->temp_cruise[index] & 0x7f);
 835         } else {                /* TEMP_TOLERANCE */
 836                 val = data->tolerance[index >> 1] >> ((index & 0x01) ? 4 : 0);
 837                 val = TEMP_FROM_REG(val & 0x0f);
 838         }
 839         return sprintf(buf, "%d\n", val);
 840 }
 841
 842 static ssize_t
 843 store_sf_ctrl(struct device *dev, struct device_attribute *attr,
 844               const char *buf, size_t count)
 845 {
 846         struct sensor_device_attribute_2 *sensor_attr =
 847             to_sensor_dev_attr_2(attr);
 848         int nr = sensor_attr->nr;
 849         int index = sensor_attr->index;
 850         struct i2c_client *client = to_i2c_client(dev);
 851         struct w83793_data *data = i2c_get_clientdata(client);
 852         long val;
 853         int err;
 854
 855         err = kstrtol(buf, 10, &val);
 856         if (err)
 857                 return err;
 858
 859         mutex_lock(&data->update_lock);
 860         if (nr == TEMP_FAN_MAP) {
 861                 val = SENSORS_LIMIT(val, 0, 255);
 862                 w83793_write_value(client, W83793_REG_TEMP_FAN_MAP(index), val);
 863                 data->temp_fan_map[index] = val;
 864         } else if (nr == TEMP_PWM_ENABLE) {
 865                 if (val == 2 || val == 3) {
 866                         data->pwm_enable =
 867                             w83793_read_value(client, W83793_REG_PWM_ENABLE);
 868                         if (val - 2)
 869                                 data->pwm_enable |= 1 << index;
 870                         else
 871                                 data->pwm_enable &= ~(1 << index);
 872                         w83793_write_value(client, W83793_REG_PWM_ENABLE,
 873                                                         data->pwm_enable);
 874                 } else {
 875                         mutex_unlock(&data->update_lock);
 876                         return -EINVAL;
 877                 }
 878         } else if (nr == TEMP_CRUISE) {
 879                 data->temp_cruise[index] =
 880                     w83793_read_value(client, W83793_REG_TEMP_CRUISE(index));
 881                 data->temp_cruise[index] &= 0x80;
 882                 data->temp_cruise[index] |= TEMP_TO_REG(val, 0, 0x7f);
 883
 884                 w83793_write_value(client, W83793_REG_TEMP_CRUISE(index),
 885                                                 data->temp_cruise[index]);
 886         } else {                /* TEMP_TOLERANCE */
 887                 int i = index >> 1;
 888                 u8 shift = (index & 0x01) ? 4 : 0;
 889                 data->tolerance[i] =
 890                     w83793_read_value(client, W83793_REG_TEMP_TOL(i));
 891
 892                 data->tolerance[i] &= ~(0x0f << shift);
 893                 data->tolerance[i] |= TEMP_TO_REG(val, 0, 0x0f) << shift;
 894                 w83793_write_value(client, W83793_REG_TEMP_TOL(i),
 895                                                         data->tolerance[i]);
 896         }
 897
 898         mutex_unlock(&data->update_lock);
 899         return count;
 900 }
 901
 902 static ssize_t
 903 show_sf2_pwm(struct device *dev, struct device_attribute *attr, char *buf)
 904 {
 905         struct sensor_device_attribute_2 *sensor_attr =
 906             to_sensor_dev_attr_2(attr);
 907         int nr = sensor_attr->nr;
 908         int index = sensor_attr->index;
 909         struct w83793_data *data = w83793_update_device(dev);
 910
 911         return sprintf(buf, "%d\n", (data->sf2_pwm[index][nr] & 0x3f) << 2);
 912 }
 913
 914 static ssize_t
 915 store_sf2_pwm(struct device *dev, struct device_attribute *attr,
 916               const char *buf, size_t count)
 917 {
 918         struct i2c_client *client = to_i2c_client(dev);
 919         struct w83793_data *data = i2c_get_clientdata(client);
 920         struct sensor_device_attribute_2 *sensor_attr =
 921             to_sensor_dev_attr_2(attr);
 922         int nr = sensor_attr->nr;
 923         int index = sensor_attr->index;
 924         unsigned long val;
 925         int err;
 926
 927         err = kstrtoul(buf, 10, &val);
 928         if (err)
 929                 return err;
 930         val = SENSORS_LIMIT(val, 0, 0xff) >> 2;
 931
 932         mutex_lock(&data->update_lock);
 933         data->sf2_pwm[index][nr] =
 934             w83793_read_value(client, W83793_REG_SF2_PWM(index, nr)) & 0xc0;
 935         data->sf2_pwm[index][nr] |= val;
 936         w83793_write_value(client, W83793_REG_SF2_PWM(index, nr),
 937                                                 data->sf2_pwm[index][nr]);
 938         mutex_unlock(&data->update_lock);
 939         return count;
 940 }
 941
 942 static ssize_t
 943 show_sf2_temp(struct device *dev, struct device_attribute *attr, char *buf)
 944 {
 945         struct sensor_device_attribute_2 *sensor_attr =
 946             to_sensor_dev_attr_2(attr);
 947         int nr = sensor_attr->nr;
 948         int index = sensor_attr->index;
 949         struct w83793_data *data = w83793_update_device(dev);
 950
 951         return sprintf(buf, "%ld\n",
 952                        TEMP_FROM_REG(data->sf2_temp[index][nr] & 0x7f));
 953 }
 954
 955 static ssize_t
 956 store_sf2_temp(struct device *dev, struct device_attribute *attr,
 957                const char *buf, size_t count)
 958 {
 959         struct i2c_client *client = to_i2c_client(dev);
 960         struct w83793_data *data = i2c_get_clientdata(client);
 961         struct sensor_device_attribute_2 *sensor_attr =
 962             to_sensor_dev_attr_2(attr);
 963         int nr = sensor_attr->nr;
 964         int index = sensor_attr->index;
 965         long val;
 966         int err;
 967
 968         err = kstrtol(buf, 10, &val);
 969         if (err)
 970                 return err;
 971         val = TEMP_TO_REG(val, 0, 0x7f);
 972
 973         mutex_lock(&data->update_lock);
 974         data->sf2_temp[index][nr] =
 975             w83793_read_value(client, W83793_REG_SF2_TEMP(index, nr)) & 0x80;
 976         data->sf2_temp[index][nr] |= val;
 977         w83793_write_value(client, W83793_REG_SF2_TEMP(index, nr),
 978                                              data->sf2_temp[index][nr]);
 979         mutex_unlock(&data->update_lock);
 980         return count;
 981 }
 982
 983 /* only Vcore A/B and Vtt have additional 2 bits precision */
 984 static ssize_t
 985 show_in(struct device *dev, struct device_attribute *attr, char *buf)
 986 {
 987         struct sensor_device_attribute_2 *sensor_attr =
 988             to_sensor_dev_attr_2(attr);
 989         int nr = sensor_attr->nr;
 990         int index = sensor_attr->index;
 991         struct w83793_data *data = w83793_update_device(dev);
 992         u16 val = data->in[index][nr];
 993
 994         if (index < 3) {
 995                 val <<= 2;
 996                 val += (data->in_low_bits[nr] >> (index * 2)) & 0x3;
 997         }
 998         /* voltage inputs 5VDD and 5VSB needs 150mV offset */
 999         val = val * scale_in[index] + scale_in_add[index];
1000         return sprintf(buf, "%d\n", val);
1001 }
1002
1003 static ssize_t
1004 store_in(struct device *dev, struct device_attribute *attr,
1005          const char *buf, size_t count)
1006 {
1007         struct sensor_device_attribute_2 *sensor_attr =
1008             to_sensor_dev_attr_2(attr);
1009         int nr = sensor_attr->nr;
1010         int index = sensor_attr->index;
1011         struct i2c_client *client = to_i2c_client(dev);
1012         struct w83793_data *data = i2c_get_clientdata(client);
1013         unsigned long val;
1014         int err;
1015
1016         err = kstrtoul(buf, 10, &val);
1017         if (err)
1018                 return err;
1019         val = (val + scale_in[index] / 2) / scale_in[index];
1020
1021         mutex_lock(&data->update_lock);
1022         if (index > 2) {
1023                 /* fix the limit values of 5VDD and 5VSB to ALARM mechanism */
1024                 if (nr == 1 || nr == 2)
1025                         val -= scale_in_add[index] / scale_in[index];
1026                 val = SENSORS_LIMIT(val, 0, 255);
1027         } else {
1028                 val = SENSORS_LIMIT(val, 0, 0x3FF);
1029                 data->in_low_bits[nr] =
1030                     w83793_read_value(client, W83793_REG_IN_LOW_BITS[nr]);
1031                 data->in_low_bits[nr] &= ~(0x03 << (2 * index));
1032                 data->in_low_bits[nr] |= (val & 0x03) << (2 * index);
1033                 w83793_write_value(client, W83793_REG_IN_LOW_BITS[nr],
1034                                                      data->in_low_bits[nr]);
1035                 val >>= 2;
1036         }
1037         data->in[index][nr] = val;
1038         w83793_write_value(client, W83793_REG_IN[index][nr],
1039                                                         data->in[index][nr]);
1040         mutex_unlock(&data->update_lock);
1041         return count;
1042 }
1043
1044 #define NOT_USED                        -1
1045
1046 #define SENSOR_ATTR_IN(index)                                           \
1047         SENSOR_ATTR_2(in##index##_input, S_IRUGO, show_in, NULL,        \
1048                 IN_READ, index),                                        \
1049         SENSOR_ATTR_2(in##index##_max, S_IRUGO | S_IWUSR, show_in,      \
1050                 store_in, IN_MAX, index),                               \
1051         SENSOR_ATTR_2(in##index##_min, S_IRUGO | S_IWUSR, show_in,      \
1052                 store_in, IN_LOW, index),                               \
1053         SENSOR_ATTR_2(in##index##_alarm, S_IRUGO, show_alarm_beep,      \
1054                 NULL, ALARM_STATUS, index + ((index > 2) ? 1 : 0)),     \
1055         SENSOR_ATTR_2(in##index##_beep, S_IWUSR | S_IRUGO,              \
1056                 show_alarm_beep, store_beep, BEEP_ENABLE,               \
1057                 index + ((index > 2) ? 1 : 0))
1058
1059 #define SENSOR_ATTR_FAN(index)                                          \
1060         SENSOR_ATTR_2(fan##index##_alarm, S_IRUGO, show_alarm_beep,     \
1061                 NULL, ALARM_STATUS, index + 17),                        \
1062         SENSOR_ATTR_2(fan##index##_beep, S_IWUSR | S_IRUGO,             \
1063                 show_alarm_beep, store_beep, BEEP_ENABLE, index + 17),  \
1064         SENSOR_ATTR_2(fan##index##_input, S_IRUGO, show_fan,            \
1065                 NULL, FAN_INPUT, index - 1),                            \
1066         SENSOR_ATTR_2(fan##index##_min, S_IWUSR | S_IRUGO,              \
1067                 show_fan, store_fan_min, FAN_MIN, index - 1)
1068
1069 #define SENSOR_ATTR_PWM(index)                                          \
1070         SENSOR_ATTR_2(pwm##index, S_IWUSR | S_IRUGO, show_pwm,          \
1071                 store_pwm, PWM_DUTY, index - 1),                        \
1072         SENSOR_ATTR_2(pwm##index##_nonstop, S_IWUSR | S_IRUGO,          \
1073                 show_pwm, store_pwm, PWM_NONSTOP, index - 1),           \
1074         SENSOR_ATTR_2(pwm##index##_start, S_IWUSR | S_IRUGO,            \
1075                 show_pwm, store_pwm, PWM_START, index - 1),             \
1076         SENSOR_ATTR_2(pwm##index##_stop_time, S_IWUSR | S_IRUGO,        \
1077                 show_pwm, store_pwm, PWM_STOP_TIME, index - 1)
1078
1079 #define SENSOR_ATTR_TEMP(index)                                         \
1080         SENSOR_ATTR_2(temp##index##_type, S_IRUGO | S_IWUSR,            \
1081                 show_temp_mode, store_temp_mode, NOT_USED, index - 1),  \
1082         SENSOR_ATTR_2(temp##index##_input, S_IRUGO, show_temp,          \
1083                 NULL, TEMP_READ, index - 1),                            \
1084         SENSOR_ATTR_2(temp##index##_max, S_IRUGO | S_IWUSR, show_temp,  \
1085                 store_temp, TEMP_CRIT, index - 1),                      \
1086         SENSOR_ATTR_2(temp##index##_max_hyst, S_IRUGO | S_IWUSR,        \
1087                 show_temp, store_temp, TEMP_CRIT_HYST, index - 1),      \
1088         SENSOR_ATTR_2(temp##index##_warn, S_IRUGO | S_IWUSR, show_temp, \
1089                 store_temp, TEMP_WARN, index - 1),                      \
1090         SENSOR_ATTR_2(temp##index##_warn_hyst, S_IRUGO | S_IWUSR,       \
1091                 show_temp, store_temp, TEMP_WARN_HYST, index - 1),      \
1092         SENSOR_ATTR_2(temp##index##_alarm, S_IRUGO,                     \
1093                 show_alarm_beep, NULL, ALARM_STATUS, index + 11),       \
1094         SENSOR_ATTR_2(temp##index##_beep, S_IWUSR | S_IRUGO,            \
1095                 show_alarm_beep, store_beep, BEEP_ENABLE, index + 11),  \
1096         SENSOR_ATTR_2(temp##index##_auto_channels_pwm,                  \
1097                 S_IRUGO | S_IWUSR, show_sf_ctrl, store_sf_ctrl,         \
1098                 TEMP_FAN_MAP, index - 1),                               \
1099         SENSOR_ATTR_2(temp##index##_pwm_enable, S_IWUSR | S_IRUGO,      \
1100                 show_sf_ctrl, store_sf_ctrl, TEMP_PWM_ENABLE,           \
1101                 index - 1),                                             \
1102         SENSOR_ATTR_2(thermal_cruise##index, S_IRUGO | S_IWUSR,         \
1103                 show_sf_ctrl, store_sf_ctrl, TEMP_CRUISE, index - 1),   \
1104         SENSOR_ATTR_2(tolerance##index, S_IRUGO | S_IWUSR, show_sf_ctrl,\
1105                 store_sf_ctrl, TEMP_TOLERANCE, index - 1),              \
1106         SENSOR_ATTR_2(temp##index##_auto_point1_pwm, S_IRUGO | S_IWUSR, \
1107                 show_sf2_pwm, store_sf2_pwm, 0, index - 1),             \
1108         SENSOR_ATTR_2(temp##index##_auto_point2_pwm, S_IRUGO | S_IWUSR, \
1109                 show_sf2_pwm, store_sf2_pwm, 1, index - 1),             \
1110         SENSOR_ATTR_2(temp##index##_auto_point3_pwm, S_IRUGO | S_IWUSR, \
1111                 show_sf2_pwm, store_sf2_pwm, 2, index - 1),             \
1112         SENSOR_ATTR_2(temp##index##_auto_point4_pwm, S_IRUGO | S_IWUSR, \
1113                 show_sf2_pwm, store_sf2_pwm, 3, index - 1),             \
1114         SENSOR_ATTR_2(temp##index##_auto_point5_pwm, S_IRUGO | S_IWUSR, \
1115                 show_sf2_pwm, store_sf2_pwm, 4, index - 1),             \
1116         SENSOR_ATTR_2(temp##index##_auto_point6_pwm, S_IRUGO | S_IWUSR, \
1117                 show_sf2_pwm, store_sf2_pwm, 5, index - 1),             \
1118         SENSOR_ATTR_2(temp##index##_auto_point7_pwm, S_IRUGO | S_IWUSR, \
1119                 show_sf2_pwm, store_sf2_pwm, 6, index - 1),             \
1120         SENSOR_ATTR_2(temp##index##_auto_point1_temp, S_IRUGO | S_IWUSR,\
1121                 show_sf2_temp, store_sf2_temp, 0, index - 1),           \
1122         SENSOR_ATTR_2(temp##index##_auto_point2_temp, S_IRUGO | S_IWUSR,\
1123                 show_sf2_temp, store_sf2_temp, 1, index - 1),           \
1124         SENSOR_ATTR_2(temp##index##_auto_point3_temp, S_IRUGO | S_IWUSR,\
1125                 show_sf2_temp, store_sf2_temp, 2, index - 1),           \
1126         SENSOR_ATTR_2(temp##index##_auto_point4_temp, S_IRUGO | S_IWUSR,\
1127                 show_sf2_temp, store_sf2_temp, 3, index - 1),           \
1128         SENSOR_ATTR_2(temp##index##_auto_point5_temp, S_IRUGO | S_IWUSR,\
1129                 show_sf2_temp, store_sf2_temp, 4, index - 1),           \
1130         SENSOR_ATTR_2(temp##index##_auto_point6_temp, S_IRUGO | S_IWUSR,\
1131                 show_sf2_temp, store_sf2_temp, 5, index - 1),           \
1132         SENSOR_ATTR_2(temp##index##_auto_point7_temp, S_IRUGO | S_IWUSR,\
1133                 show_sf2_temp, store_sf2_temp, 6, index - 1)
1134
1135 static struct sensor_device_attribute_2 w83793_sensor_attr_2[] = {
1136         SENSOR_ATTR_IN(0),
1137         SENSOR_ATTR_IN(1),
1138         SENSOR_ATTR_IN(2),
1139         SENSOR_ATTR_IN(3),
1140         SENSOR_ATTR_IN(4),
1141         SENSOR_ATTR_IN(5),
1142         SENSOR_ATTR_IN(6),
1143         SENSOR_ATTR_IN(7),
1144         SENSOR_ATTR_IN(8),
1145         SENSOR_ATTR_IN(9),
1146         SENSOR_ATTR_FAN(1),
1147         SENSOR_ATTR_FAN(2),
1148         SENSOR_ATTR_FAN(3),
1149         SENSOR_ATTR_FAN(4),
1150         SENSOR_ATTR_FAN(5),
1151         SENSOR_ATTR_PWM(1),
1152         SENSOR_ATTR_PWM(2),
1153         SENSOR_ATTR_PWM(3),
1154 };
1155
1156 static struct sensor_device_attribute_2 w83793_temp[] = {
1157         SENSOR_ATTR_TEMP(1),
1158         SENSOR_ATTR_TEMP(2),
1159         SENSOR_ATTR_TEMP(3),
1160         SENSOR_ATTR_TEMP(4),
1161         SENSOR_ATTR_TEMP(5),
1162         SENSOR_ATTR_TEMP(6),
1163 };
1164
1165 /* Fan6-Fan12 */
1166 static struct sensor_device_attribute_2 w83793_left_fan[] = {
1167         SENSOR_ATTR_FAN(6),
1168         SENSOR_ATTR_FAN(7),
1169         SENSOR_ATTR_FAN(8),
1170         SENSOR_ATTR_FAN(9),
1171         SENSOR_ATTR_FAN(10),
1172         SENSOR_ATTR_FAN(11),
1173         SENSOR_ATTR_FAN(12),
1174 };
1175
1176 /* Pwm4-Pwm8 */
1177 static struct sensor_device_attribute_2 w83793_left_pwm[] = {
1178         SENSOR_ATTR_PWM(4),
1179         SENSOR_ATTR_PWM(5),
1180         SENSOR_ATTR_PWM(6),
1181         SENSOR_ATTR_PWM(7),
1182         SENSOR_ATTR_PWM(8),
1183 };
1184
1185 static struct sensor_device_attribute_2 w83793_vid[] = {
1186         SENSOR_ATTR_2(cpu0_vid, S_IRUGO, show_vid, NULL, NOT_USED, 0),
1187         SENSOR_ATTR_2(cpu1_vid, S_IRUGO, show_vid, NULL, NOT_USED, 1),
1188 };
1189 static DEVICE_ATTR(vrm, S_IWUSR | S_IRUGO, show_vrm, store_vrm);
1190
1191 static struct sensor_device_attribute_2 sda_single_files[] = {
1192         SENSOR_ATTR_2(chassis, S_IWUSR | S_IRUGO, show_alarm_beep,
1193                       store_chassis_clear_legacy, ALARM_STATUS, 30),
1194         SENSOR_ATTR_2(intrusion0_alarm, S_IWUSR | S_IRUGO, show_alarm_beep,
1195                       store_chassis_clear, ALARM_STATUS, 30),
1196         SENSOR_ATTR_2(beep_enable, S_IWUSR | S_IRUGO, show_beep_enable,
1197                       store_beep_enable, NOT_USED, NOT_USED),
1198         SENSOR_ATTR_2(pwm_default, S_IWUSR | S_IRUGO, show_sf_setup,
1199                       store_sf_setup, SETUP_PWM_DEFAULT, NOT_USED),
1200         SENSOR_ATTR_2(pwm_uptime, S_IWUSR | S_IRUGO, show_sf_setup,
1201                       store_sf_setup, SETUP_PWM_UPTIME, NOT_USED),
1202         SENSOR_ATTR_2(pwm_downtime, S_IWUSR | S_IRUGO, show_sf_setup,
1203                       store_sf_setup, SETUP_PWM_DOWNTIME, NOT_USED),
1204         SENSOR_ATTR_2(temp_critical, S_IWUSR | S_IRUGO, show_sf_setup,
1205                       store_sf_setup, SETUP_TEMP_CRITICAL, NOT_USED),
1206 };
1207
1208 static void w83793_init_client(struct i2c_client *client)
1209 {
1210         if (reset)
1211                 w83793_write_value(client, W83793_REG_CONFIG, 0x80);
1212
1213         /* Start monitoring */
1214         w83793_write_value(client, W83793_REG_CONFIG,
1215                            w83793_read_value(client, W83793_REG_CONFIG) | 0x01);
1216 }
1217
1218 /*
1219  * Watchdog routines
1220  */
1221
1222 static int watchdog_set_timeout(struct w83793_data *data, int timeout)
1223 {
1224         int ret, mtimeout;
1225
1226         mtimeout = DIV_ROUND_UP(timeout, 60);
1227
1228         if (mtimeout > 255)
1229                 return -EINVAL;
1230
1231         mutex_lock(&data->watchdog_lock);
1232         if (!data->client) {
1233                 ret = -ENODEV;
1234                 goto leave;
1235         }
1236
1237         data->watchdog_timeout = mtimeout;
1238
1239         /* Set Timeout value (in Minutes) */
1240         w83793_write_value(data->client, W83793_REG_WDT_TIMEOUT,
1241                            data->watchdog_timeout);
1242
1243         ret = mtimeout * 60;
1244
1245 leave:
1246         mutex_unlock(&data->watchdog_lock);
1247         return ret;
1248 }
1249
1250 static int watchdog_get_timeout(struct w83793_data *data)
1251 {
1252         int timeout;
1253
1254         mutex_lock(&data->watchdog_lock);
1255         timeout = data->watchdog_timeout * 60;
1256         mutex_unlock(&data->watchdog_lock);
1257
1258         return timeout;
1259 }
1260
1261 static int watchdog_trigger(struct w83793_data *data)
1262 {
1263         int ret = 0;
1264
1265         mutex_lock(&data->watchdog_lock);
1266         if (!data->client) {
1267                 ret = -ENODEV;
1268                 goto leave;
1269         }
1270
1271         /* Set Timeout value (in Minutes) */
1272         w83793_write_value(data->client, W83793_REG_WDT_TIMEOUT,
1273                            data->watchdog_timeout);
1274
1275 leave:
1276         mutex_unlock(&data->watchdog_lock);
1277         return ret;
1278 }
1279
1280 static int watchdog_enable(struct w83793_data *data)
1281 {
1282         int ret = 0;
1283
1284         mutex_lock(&data->watchdog_lock);
1285         if (!data->client) {
1286                 ret = -ENODEV;
1287                 goto leave;
1288         }
1289
1290         /* Set initial timeout */
1291         w83793_write_value(data->client, W83793_REG_WDT_TIMEOUT,
1292                            data->watchdog_timeout);
1293
1294         /* Enable Soft Watchdog */
1295         w83793_write_value(data->client, W83793_REG_WDT_LOCK, 0x55);
1296
1297 leave:
1298         mutex_unlock(&data->watchdog_lock);
1299         return ret;
1300 }
1301
1302 static int watchdog_disable(struct w83793_data *data)
1303 {
1304         int ret = 0;
1305
1306         mutex_lock(&data->watchdog_lock);
1307         if (!data->client) {
1308                 ret = -ENODEV;
1309                 goto leave;
1310         }
1311
1312         /* Disable Soft Watchdog */
1313         w83793_write_value(data->client, W83793_REG_WDT_LOCK, 0xAA);
1314
1315 leave:
1316         mutex_unlock(&data->watchdog_lock);
1317         return ret;
1318 }
1319
1320 static int watchdog_open(struct inode *inode, struct file *filp)
1321 {
1322         struct w83793_data *pos, *data = NULL;
1323         int watchdog_is_open;
1324
1325         /*
1326          * We get called from drivers/char/misc.c with misc_mtx hold, and we
1327          * call misc_register() from  w83793_probe() with watchdog_data_mutex
1328          * hold, as misc_register() takes the misc_mtx lock, this is a possible
1329          * deadlock, so we use mutex_trylock here.
1330          */
1331         if (!mutex_trylock(&watchdog_data_mutex))
1332                 return -ERESTARTSYS;
1333         list_for_each_entry(pos, &watchdog_data_list, list) {
1334                 if (pos->watchdog_miscdev.minor == iminor(inode)) {
1335                         data = pos;
1336                         break;
1337                 }
1338         }
1339
1340         /* Check, if device is already open */
1341         watchdog_is_open = test_and_set_bit(0, &data->watchdog_is_open);
1342
1343         /*
1344          * Increase data reference counter (if not already done).
1345          * Note we can never not have found data, so we don't check for this
1346          */
1347         if (!watchdog_is_open)
1348                 kref_get(&data->kref);
1349
1350         mutex_unlock(&watchdog_data_mutex);
1351
1352         /* Check, if device is already open and possibly issue error */
1353         if (watchdog_is_open)
1354                 return -EBUSY;
1355
1356         /* Enable Soft Watchdog */
1357         watchdog_enable(data);
1358
1359         /* Store pointer to data into filp's private data */
1360         filp->private_data = data;
1361
1362         return nonseekable_open(inode, filp);
1363 }
1364
1365 static int watchdog_close(struct inode *inode, struct file *filp)
1366 {
1367         struct w83793_data *data = filp->private_data;
1368
1369         if (data->watchdog_expect_close) {
1370                 watchdog_disable(data);
1371                 data->watchdog_expect_close = 0;
1372         } else {
1373                 watchdog_trigger(data);
1374                 dev_crit(&data->client->dev,
1375                         "unexpected close, not stopping watchdog!\n");
1376         }
1377
1378         clear_bit(0, &data->watchdog_is_open);
1379
1380         /* Decrease data reference counter */
1381         mutex_lock(&watchdog_data_mutex);
1382         kref_put(&data->kref, w83793_release_resources);
1383         mutex_unlock(&watchdog_data_mutex);
1384
1385         return 0;
1386 }
1387
1388 static ssize_t watchdog_write(struct file *filp, const char __user *buf,
1389         size_t count, loff_t *offset)
1390 {
1391         ssize_t ret;
1392         struct w83793_data *data = filp->private_data;
1393
1394         if (count) {
1395                 if (!nowayout) {
1396                         size_t i;
1397
1398                         /* Clear it in case it was set with a previous write */
1399                         data->watchdog_expect_close = 0;
1400
1401                         for (i = 0; i != count; i++) {
1402                                 char c;
1403                                 if (get_user(c, buf + i))
1404                                         return -EFAULT;
1405                                 if (c == 'V')
1406                                         data->watchdog_expect_close = 1;
1407                         }
1408                 }
1409                 ret = watchdog_trigger(data);
1410                 if (ret < 0)
1411                         return ret;
1412         }
1413         return count;
1414 }
1415
1416 static long watchdog_ioctl(struct file *filp, unsigned int cmd,
1417                            unsigned long arg)
1418 {
1419         struct watchdog_info ident = {
1420                 .options = WDIOF_KEEPALIVEPING |
1421                            WDIOF_SETTIMEOUT |
1422                            WDIOF_CARDRESET,
1423                 .identity = "w83793 watchdog"
1424         };
1425
1426         int val, ret = 0;
1427         struct w83793_data *data = filp->private_data;
1428
1429         switch (cmd) {
1430         case WDIOC_GETSUPPORT:
1431                 if (!nowayout)
1432                         ident.options |= WDIOF_MAGICCLOSE;
1433                 if (copy_to_user((void __user *)arg, &ident, sizeof(ident)))
1434                         ret = -EFAULT;
1435                 break;
1436
1437         case WDIOC_GETSTATUS:
1438                 val = data->watchdog_caused_reboot ? WDIOF_CARDRESET : 0;
1439                 ret = put_user(val, (int __user *)arg);
1440                 break;
1441
1442         case WDIOC_GETBOOTSTATUS:
1443                 ret = put_user(0, (int __user *)arg);
1444                 break;
1445
1446         case WDIOC_KEEPALIVE:
1447                 ret = watchdog_trigger(data);
1448                 break;
1449
1450         case WDIOC_GETTIMEOUT:
1451                 val = watchdog_get_timeout(data);
1452                 ret = put_user(val, (int __user *)arg);
1453                 break;
1454
1455         case WDIOC_SETTIMEOUT:
1456                 if (get_user(val, (int __user *)arg)) {
1457                         ret = -EFAULT;
1458                         break;
1459                 }
1460                 ret = watchdog_set_timeout(data, val);
1461                 if (ret > 0)
1462                         ret = put_user(ret, (int __user *)arg);
1463                 break;
1464
1465         case WDIOC_SETOPTIONS:
1466                 if (get_user(val, (int __user *)arg)) {
1467                         ret = -EFAULT;
1468                         break;
1469                 }
1470
1471                 if (val & WDIOS_DISABLECARD)
1472                         ret = watchdog_disable(data);
1473                 else if (val & WDIOS_ENABLECARD)
1474                         ret = watchdog_enable(data);
1475                 else
1476                         ret = -EINVAL;
1477
1478                 break;
1479         default:
1480                 ret = -ENOTTY;
1481         }
1482         return ret;
1483 }
1484
1485 static const struct file_operations watchdog_fops = {
1486         .owner = THIS_MODULE,
1487         .llseek = no_llseek,
1488         .open = watchdog_open,
1489         .release = watchdog_close,
1490         .write = watchdog_write,
1491         .unlocked_ioctl = watchdog_ioctl,
1492 };
1493
1494 /*
1495  *      Notifier for system down
1496  */
1497
1498 static int watchdog_notify_sys(struct notifier_block *this, unsigned long code,
1499                                void *unused)
1500 {
1501         struct w83793_data *data = NULL;
1502
1503         if (code == SYS_DOWN || code == SYS_HALT) {
1504
1505                 /* Disable each registered watchdog */
1506                 mutex_lock(&watchdog_data_mutex);
1507                 list_for_each_entry(data, &watchdog_data_list, list) {
1508                         if (data->watchdog_miscdev.minor)
1509                                 watchdog_disable(data);
1510                 }
1511                 mutex_unlock(&watchdog_data_mutex);
1512         }
1513
1514         return NOTIFY_DONE;
1515 }
1516
1517 /*
1518  *      The WDT needs to learn about soft shutdowns in order to
1519  *      turn the timebomb registers off.
1520  */
1521
1522 static struct notifier_block watchdog_notifier = {
1523         .notifier_call = watchdog_notify_sys,
1524 };
1525
1526 /*
1527  * Init / remove routines
1528  */
1529
1530 static int w83793_remove(struct i2c_client *client)
1531 {
1532         struct w83793_data *data = i2c_get_clientdata(client);
1533         struct device *dev = &client->dev;
1534         int i, tmp;
1535
1536         /* Unregister the watchdog (if registered) */
1537         if (data->watchdog_miscdev.minor) {
1538                 misc_deregister(&data->watchdog_miscdev);
1539
1540                 if (data->watchdog_is_open) {
1541                         dev_warn(&client->dev,
1542                                 "i2c client detached with watchdog open! "
1543                                 "Stopping watchdog.\n");
1544                         watchdog_disable(data);
1545                 }
1546
1547                 mutex_lock(&watchdog_data_mutex);
1548                 list_del(&data->list);
1549                 mutex_unlock(&watchdog_data_mutex);
1550
1551                 /* Tell the watchdog code the client is gone */
1552                 mutex_lock(&data->watchdog_lock);
1553                 data->client = NULL;
1554                 mutex_unlock(&data->watchdog_lock);
1555         }
1556
1557         /* Reset Configuration Register to Disable Watch Dog Registers */
1558         tmp = w83793_read_value(client, W83793_REG_CONFIG);
1559         w83793_write_value(client, W83793_REG_CONFIG, tmp & ~0x04);
1560
1561         unregister_reboot_notifier(&watchdog_notifier);
1562
1563         hwmon_device_unregister(data->hwmon_dev);
1564
1565         for (i = 0; i < ARRAY_SIZE(w83793_sensor_attr_2); i++)
1566                 device_remove_file(dev,
1567                                    &w83793_sensor_attr_2[i].dev_attr);
1568
1569         for (i = 0; i < ARRAY_SIZE(sda_single_files); i++)
1570                 device_remove_file(dev, &sda_single_files[i].dev_attr);
1571
1572         for (i = 0; i < ARRAY_SIZE(w83793_vid); i++)
1573                 device_remove_file(dev, &w83793_vid[i].dev_attr);
1574         device_remove_file(dev, &dev_attr_vrm);
1575
1576         for (i = 0; i < ARRAY_SIZE(w83793_left_fan); i++)
1577                 device_remove_file(dev, &w83793_left_fan[i].dev_attr);
1578
1579         for (i = 0; i < ARRAY_SIZE(w83793_left_pwm); i++)
1580                 device_remove_file(dev, &w83793_left_pwm[i].dev_attr);
1581
1582         for (i = 0; i < ARRAY_SIZE(w83793_temp); i++)
1583                 device_remove_file(dev, &w83793_temp[i].dev_attr);
1584
1585         if (data->lm75[0] != NULL)
1586                 i2c_unregister_device(data->lm75[0]);
1587         if (data->lm75[1] != NULL)
1588                 i2c_unregister_device(data->lm75[1]);
1589
1590         /* Decrease data reference counter */
1591         mutex_lock(&watchdog_data_mutex);
1592         kref_put(&data->kref, w83793_release_resources);
1593         mutex_unlock(&watchdog_data_mutex);
1594
1595         return 0;
1596 }
1597
1598 static int
1599 w83793_detect_subclients(struct i2c_client *client)
1600 {
1601         int i, id, err;
1602         int address = client->addr;
1603         u8 tmp;
1604         struct i2c_adapter *adapter = client->adapter;
1605         struct w83793_data *data = i2c_get_clientdata(client);
1606
1607         id = i2c_adapter_id(adapter);
1608         if (force_subclients[0] == id && force_subclients[1] == address) {
1609                 for (i = 2; i <= 3; i++) {
1610                         if (force_subclients[i] < 0x48
1611                             || force_subclients[i] > 0x4f) {
1612                                 dev_err(&client->dev,
1613                                         "invalid subclient "
1614                                         "address %d; must be 0x48-0x4f\n",
1615                                         force_subclients[i]);
1616                                 err = -EINVAL;
1617                                 goto ERROR_SC_0;
1618                         }
1619                 }
1620                 w83793_write_value(client, W83793_REG_I2C_SUBADDR,
1621                                    (force_subclients[2] & 0x07) |
1622                                    ((force_subclients[3] & 0x07) << 4));
1623         }
1624
1625         tmp = w83793_read_value(client, W83793_REG_I2C_SUBADDR);
1626         if (!(tmp & 0x08))
1627                 data->lm75[0] = i2c_new_dummy(adapter, 0x48 + (tmp & 0x7));
1628         if (!(tmp & 0x80)) {
1629                 if ((data->lm75[0] != NULL)
1630                     && ((tmp & 0x7) == ((tmp >> 4) & 0x7))) {
1631                         dev_err(&client->dev,
1632                                 "duplicate addresses 0x%x, "
1633                                 "use force_subclients\n", data->lm75[0]->addr);
1634                         err = -ENODEV;
1635                         goto ERROR_SC_1;
1636                 }
1637                 data->lm75[1] = i2c_new_dummy(adapter,
1638                                               0x48 + ((tmp >> 4) & 0x7));
1639         }
1640
1641         return 0;
1642
1643         /* Undo inits in case of errors */
1644
1645 ERROR_SC_1:
1646         if (data->lm75[0] != NULL)
1647                 i2c_unregister_device(data->lm75[0]);
1648 ERROR_SC_0:
1649         return err;
1650 }
1651
1652 /* Return 0 if detection is successful, -ENODEV otherwise */
1653 static int w83793_detect(struct i2c_client *client,
1654                          struct i2c_board_info *info)
1655 {
1656         u8 tmp, bank, chip_id;
1657         struct i2c_adapter *adapter = client->adapter;
1658         unsigned short address = client->addr;
1659
1660         if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
1661                 return -ENODEV;
1662
1663         bank = i2c_smbus_read_byte_data(client, W83793_REG_BANKSEL);
1664
1665         tmp = bank & 0x80 ? 0x5c : 0xa3;
1666         /* Check Winbond vendor ID */
1667         if (tmp != i2c_smbus_read_byte_data(client, W83793_REG_VENDORID)) {
1668                 pr_debug("w83793: Detection failed at check vendor id\n");
1669                 return -ENODEV;
1670         }
1671
1672         /*
1673          * If Winbond chip, address of chip and W83793_REG_I2C_ADDR
1674          * should match
1675          */
1676         if ((bank & 0x07) == 0
1677          && i2c_smbus_read_byte_data(client, W83793_REG_I2C_ADDR) !=
1678             (address << 1)) {
1679                 pr_debug("w83793: Detection failed at check i2c addr\n");
1680                 return -ENODEV;
1681         }
1682
1683         /* Determine the chip type now */
1684         chip_id = i2c_smbus_read_byte_data(client, W83793_REG_CHIPID);
1685         if (chip_id != 0x7b)
1686                 return -ENODEV;
1687
1688         strlcpy(info->type, "w83793", I2C_NAME_SIZE);
1689
1690         return 0;
1691 }
1692
1693 static int w83793_probe(struct i2c_client *client,
1694                         const struct i2c_device_id *id)
1695 {
1696         struct device *dev = &client->dev;
1697         const int watchdog_minors[] = { WATCHDOG_MINOR, 212, 213, 214, 215 };
1698         struct w83793_data *data;
1699         int i, tmp, val, err;
1700         int files_fan = ARRAY_SIZE(w83793_left_fan) / 7;
1701         int files_pwm = ARRAY_SIZE(w83793_left_pwm) / 5;
1702         int files_temp = ARRAY_SIZE(w83793_temp) / 6;
1703
1704         data = kzalloc(sizeof(struct w83793_data), GFP_KERNEL);
1705         if (!data) {
1706                 err = -ENOMEM;
1707                 goto exit;
1708         }
1709
1710         i2c_set_clientdata(client, data);
1711         data->bank = i2c_smbus_read_byte_data(client, W83793_REG_BANKSEL);
1712         mutex_init(&data->update_lock);
1713         mutex_init(&data->watchdog_lock);
1714         INIT_LIST_HEAD(&data->list);
1715         kref_init(&data->kref);
1716
1717         /*
1718          * Store client pointer in our data struct for watchdog usage
1719          * (where the client is found through a data ptr instead of the
1720          * otherway around)
1721          */
1722         data->client = client;
1723
1724         err = w83793_detect_subclients(client);
1725         if (err)
1726                 goto free_mem;
1727
1728         /* Initialize the chip */
1729         w83793_init_client(client);
1730
1731         /*
1732          * Only fan 1-5 has their own input pins,
1733          * Pwm 1-3 has their own pins
1734          */
1735         data->has_fan = 0x1f;
1736         data->has_pwm = 0x07;
1737         tmp = w83793_read_value(client, W83793_REG_MFC);
1738         val = w83793_read_value(client, W83793_REG_FANIN_CTRL);
1739
1740         /* check the function of pins 49-56 */
1741         if (tmp & 0x80) {
1742                 data->has_vid |= 0x2;   /* has VIDB */
1743         } else {
1744                 data->has_pwm |= 0x18;  /* pwm 4,5 */
1745                 if (val & 0x01) {       /* fan 6 */
1746                         data->has_fan |= 0x20;
1747                         data->has_pwm |= 0x20;
1748                 }
1749                 if (val & 0x02) {       /* fan 7 */
1750                         data->has_fan |= 0x40;
1751                         data->has_pwm |= 0x40;
1752                 }
1753                 if (!(tmp & 0x40) && (val & 0x04)) {    /* fan 8 */
1754                         data->has_fan |= 0x80;
1755                         data->has_pwm |= 0x80;
1756                 }
1757         }
1758
1759         /* check the function of pins 37-40 */
1760         if (!(tmp & 0x29))
1761                 data->has_vid |= 0x1;   /* has VIDA */
1762         if (0x08 == (tmp & 0x0c)) {
1763                 if (val & 0x08) /* fan 9 */
1764                         data->has_fan |= 0x100;
1765                 if (val & 0x10) /* fan 10 */
1766                         data->has_fan |= 0x200;
1767         }
1768         if (0x20 == (tmp & 0x30)) {
1769                 if (val & 0x20) /* fan 11 */
1770                         data->has_fan |= 0x400;
1771                 if (val & 0x40) /* fan 12 */
1772                         data->has_fan |= 0x800;
1773         }
1774
1775         if ((tmp & 0x01) && (val & 0x04)) {     /* fan 8, second location */
1776                 data->has_fan |= 0x80;
1777                 data->has_pwm |= 0x80;
1778         }
1779
1780         tmp = w83793_read_value(client, W83793_REG_FANIN_SEL);
1781         if ((tmp & 0x01) && (val & 0x08)) {     /* fan 9, second location */
1782                 data->has_fan |= 0x100;
1783         }
1784         if ((tmp & 0x02) && (val & 0x10)) {     /* fan 10, second location */
1785                 data->has_fan |= 0x200;
1786         }
1787         if ((tmp & 0x04) && (val & 0x20)) {     /* fan 11, second location */
1788                 data->has_fan |= 0x400;
1789         }
1790         if ((tmp & 0x08) && (val & 0x40)) {     /* fan 12, second location */
1791                 data->has_fan |= 0x800;
1792         }
1793
1794         /* check the temp1-6 mode, ignore former AMDSI selected inputs */
1795         tmp = w83793_read_value(client, W83793_REG_TEMP_MODE[0]);
1796         if (tmp & 0x01)
1797                 data->has_temp |= 0x01;
1798         if (tmp & 0x04)
1799                 data->has_temp |= 0x02;
1800         if (tmp & 0x10)
1801                 data->has_temp |= 0x04;
1802         if (tmp & 0x40)
1803                 data->has_temp |= 0x08;
1804
1805         tmp = w83793_read_value(client, W83793_REG_TEMP_MODE[1]);
1806         if (tmp & 0x01)
1807                 data->has_temp |= 0x10;
1808         if (tmp & 0x02)
1809                 data->has_temp |= 0x20;
1810
1811         /* Register sysfs hooks */
1812         for (i = 0; i < ARRAY_SIZE(w83793_sensor_attr_2); i++) {
1813                 err = device_create_file(dev,
1814                                          &w83793_sensor_attr_2[i].dev_attr);
1815                 if (err)
1816                         goto exit_remove;
1817         }
1818
1819         for (i = 0; i < ARRAY_SIZE(w83793_vid); i++) {
1820                 if (!(data->has_vid & (1 << i)))
1821                         continue;
1822                 err = device_create_file(dev, &w83793_vid[i].dev_attr);
1823                 if (err)
1824                         goto exit_remove;
1825         }
1826         if (data->has_vid) {
1827                 data->vrm = vid_which_vrm();
1828                 err = device_create_file(dev, &dev_attr_vrm);
1829                 if (err)
1830                         goto exit_remove;
1831         }
1832
1833         for (i = 0; i < ARRAY_SIZE(sda_single_files); i++) {
1834                 err = device_create_file(dev, &sda_single_files[i].dev_attr);
1835                 if (err)
1836                         goto exit_remove;
1837
1838         }
1839
1840         for (i = 0; i < 6; i++) {
1841                 int j;
1842                 if (!(data->has_temp & (1 << i)))
1843                         continue;
1844                 for (j = 0; j < files_temp; j++) {
1845                         err = device_create_file(dev,
1846                                                 &w83793_temp[(i) * files_temp
1847                                                                 + j].dev_attr);
1848                         if (err)
1849                                 goto exit_remove;
1850                 }
1851         }
1852
1853         for (i = 5; i < 12; i++) {
1854                 int j;
1855                 if (!(data->has_fan & (1 << i)))
1856                         continue;
1857                 for (j = 0; j < files_fan; j++) {
1858                         err = device_create_file(dev,
1859                                            &w83793_left_fan[(i - 5) * files_fan
1860                                                                 + j].dev_attr);
1861                         if (err)
1862                                 goto exit_remove;
1863                 }
1864         }
1865
1866         for (i = 3; i < 8; i++) {
1867                 int j;
1868                 if (!(data->has_pwm & (1 << i)))
1869                         continue;
1870                 for (j = 0; j < files_pwm; j++) {
1871                         err = device_create_file(dev,
1872                                            &w83793_left_pwm[(i - 3) * files_pwm
1873                                                                 + j].dev_attr);
1874                         if (err)
1875                                 goto exit_remove;
1876                 }
1877         }
1878
1879         data->hwmon_dev = hwmon_device_register(dev);
1880         if (IS_ERR(data->hwmon_dev)) {
1881                 err = PTR_ERR(data->hwmon_dev);
1882                 goto exit_remove;
1883         }
1884
1885         /* Watchdog initialization */
1886
1887         /* Register boot notifier */
1888         err = register_reboot_notifier(&watchdog_notifier);
1889         if (err != 0) {
1890                 dev_err(&client->dev,
1891                         "cannot register reboot notifier (err=%d)\n", err);
1892                 goto exit_devunreg;
1893         }
1894
1895         /*
1896          * Enable Watchdog registers.
1897          * Set Configuration Register to Enable Watch Dog Registers
1898          * (Bit 2) = XXXX, X1XX.
1899          */
1900         tmp = w83793_read_value(client, W83793_REG_CONFIG);
1901         w83793_write_value(client, W83793_REG_CONFIG, tmp | 0x04);
1902
1903         /* Set the default watchdog timeout */
1904         data->watchdog_timeout = timeout;
1905
1906         /* Check, if last reboot was caused by watchdog */
1907         data->watchdog_caused_reboot =
1908           w83793_read_value(data->client, W83793_REG_WDT_STATUS) & 0x01;
1909
1910         /* Disable Soft Watchdog during initialiation */
1911         watchdog_disable(data);
1912
1913         /*
1914          * We take the data_mutex lock early so that watchdog_open() cannot
1915          * run when misc_register() has completed, but we've not yet added
1916          * our data to the watchdog_data_list (and set the default timeout)
1917          */
1918         mutex_lock(&watchdog_data_mutex);
1919         for (i = 0; i < ARRAY_SIZE(watchdog_minors); i++) {
1920                 /* Register our watchdog part */
1921                 snprintf(data->watchdog_name, sizeof(data->watchdog_name),
1922                         "watchdog%c", (i == 0) ? '\0' : ('0' + i));
1923                 data->watchdog_miscdev.name = data->watchdog_name;
1924                 data->watchdog_miscdev.fops = &watchdog_fops;
1925                 data->watchdog_miscdev.minor = watchdog_minors[i];
1926
1927                 err = misc_register(&data->watchdog_miscdev);
1928                 if (err == -EBUSY)
1929                         continue;
1930                 if (err) {
1931                         data->watchdog_miscdev.minor = 0;
1932                         dev_err(&client->dev,
1933                                 "Registering watchdog chardev: %d\n", err);
1934                         break;
1935                 }
1936
1937                 list_add(&data->list, &watchdog_data_list);
1938
1939                 dev_info(&client->dev,
1940                         "Registered watchdog chardev major 10, minor: %d\n",
1941                         watchdog_minors[i]);
1942                 break;
1943         }
1944         if (i == ARRAY_SIZE(watchdog_minors)) {
1945                 data->watchdog_miscdev.minor = 0;
1946                 dev_warn(&client->dev, "Couldn't register watchdog chardev "
1947                         "(due to no free minor)\n");
1948         }
1949
1950         mutex_unlock(&watchdog_data_mutex);
1951
1952         return 0;
1953
1954         /* Unregister hwmon device */
1955
1956 exit_devunreg:
1957
1958         hwmon_device_unregister(data->hwmon_dev);
1959
1960         /* Unregister sysfs hooks */
1961
1962 exit_remove:
1963         for (i = 0; i < ARRAY_SIZE(w83793_sensor_attr_2); i++)
1964                 device_remove_file(dev, &w83793_sensor_attr_2[i].dev_attr);
1965
1966         for (i = 0; i < ARRAY_SIZE(sda_single_files); i++)
1967                 device_remove_file(dev, &sda_single_files[i].dev_attr);
1968
1969         for (i = 0; i < ARRAY_SIZE(w83793_vid); i++)
1970                 device_remove_file(dev, &w83793_vid[i].dev_attr);
1971
1972         for (i = 0; i < ARRAY_SIZE(w83793_left_fan); i++)
1973                 device_remove_file(dev, &w83793_left_fan[i].dev_attr);
1974
1975         for (i = 0; i < ARRAY_SIZE(w83793_left_pwm); i++)
1976                 device_remove_file(dev, &w83793_left_pwm[i].dev_attr);
1977
1978         for (i = 0; i < ARRAY_SIZE(w83793_temp); i++)
1979                 device_remove_file(dev, &w83793_temp[i].dev_attr);
1980
1981         if (data->lm75[0] != NULL)
1982                 i2c_unregister_device(data->lm75[0]);
1983         if (data->lm75[1] != NULL)
1984                 i2c_unregister_device(data->lm75[1]);
1985 free_mem:
1986         kfree(data);
1987 exit:
1988         return err;
1989 }
1990
1991 static void w83793_update_nonvolatile(struct device *dev)
1992 {
1993         struct i2c_client *client = to_i2c_client(dev);
1994         struct w83793_data *data = i2c_get_clientdata(client);
1995         int i, j;
1996         /*
1997          * They are somewhat "stable" registers, and to update them every time
1998          * takes so much time, it's just not worthy. Update them in a long
1999          * interval to avoid exception.
2000          */
2001         if (!(time_after(jiffies, data->last_nonvolatile + HZ * 300)
2002               || !data->valid))
2003                 return;
2004         /* update voltage limits */
2005         for (i = 1; i < 3; i++) {
2006                 for (j = 0; j < ARRAY_SIZE(data->in); j++) {
2007                         data->in[j][i] =
2008                             w83793_read_value(client, W83793_REG_IN[j][i]);
2009                 }
2010                 data->in_low_bits[i] =
2011                     w83793_read_value(client, W83793_REG_IN_LOW_BITS[i]);
2012         }
2013
2014         for (i = 0; i < ARRAY_SIZE(data->fan_min); i++) {
2015                 /* Update the Fan measured value and limits */
2016                 if (!(data->has_fan & (1 << i)))
2017                         continue;
2018                 data->fan_min[i] =
2019                     w83793_read_value(client, W83793_REG_FAN_MIN(i)) << 8;
2020                 data->fan_min[i] |=
2021                     w83793_read_value(client, W83793_REG_FAN_MIN(i) + 1);
2022         }
2023
2024         for (i = 0; i < ARRAY_SIZE(data->temp_fan_map); i++) {
2025                 if (!(data->has_temp & (1 << i)))
2026                         continue;
2027                 data->temp_fan_map[i] =
2028                     w83793_read_value(client, W83793_REG_TEMP_FAN_MAP(i));
2029                 for (j = 1; j < 5; j++) {
2030                         data->temp[i][j] =
2031                             w83793_read_value(client, W83793_REG_TEMP[i][j]);
2032                 }
2033                 data->temp_cruise[i] =
2034                     w83793_read_value(client, W83793_REG_TEMP_CRUISE(i));
2035                 for (j = 0; j < 7; j++) {
2036                         data->sf2_pwm[i][j] =
2037                             w83793_read_value(client, W83793_REG_SF2_PWM(i, j));
2038                         data->sf2_temp[i][j] =
2039                             w83793_read_value(client,
2040                                               W83793_REG_SF2_TEMP(i, j));
2041                 }
2042         }
2043
2044         for (i = 0; i < ARRAY_SIZE(data->temp_mode); i++)
2045                 data->temp_mode[i] =
2046                     w83793_read_value(client, W83793_REG_TEMP_MODE[i]);
2047
2048         for (i = 0; i < ARRAY_SIZE(data->tolerance); i++) {
2049                 data->tolerance[i] =
2050                     w83793_read_value(client, W83793_REG_TEMP_TOL(i));
2051         }
2052
2053         for (i = 0; i < ARRAY_SIZE(data->pwm); i++) {
2054                 if (!(data->has_pwm & (1 << i)))
2055                         continue;
2056                 data->pwm[i][PWM_NONSTOP] =
2057                     w83793_read_value(client, W83793_REG_PWM(i, PWM_NONSTOP));
2058                 data->pwm[i][PWM_START] =
2059                     w83793_read_value(client, W83793_REG_PWM(i, PWM_START));
2060                 data->pwm_stop_time[i] =
2061                     w83793_read_value(client, W83793_REG_PWM_STOP_TIME(i));
2062         }
2063
2064         data->pwm_default = w83793_read_value(client, W83793_REG_PWM_DEFAULT);
2065         data->pwm_enable = w83793_read_value(client, W83793_REG_PWM_ENABLE);
2066         data->pwm_uptime = w83793_read_value(client, W83793_REG_PWM_UPTIME);
2067         data->pwm_downtime = w83793_read_value(client, W83793_REG_PWM_DOWNTIME);
2068         data->temp_critical =
2069             w83793_read_value(client, W83793_REG_TEMP_CRITICAL);
2070         data->beep_enable = w83793_read_value(client, W83793_REG_OVT_BEEP);
2071
2072         for (i = 0; i < ARRAY_SIZE(data->beeps); i++)
2073                 data->beeps[i] = w83793_read_value(client, W83793_REG_BEEP(i));
2074
2075         data->last_nonvolatile = jiffies;
2076 }
2077
2078 static struct w83793_data *w83793_update_device(struct device *dev)
2079 {
2080         struct i2c_client *client = to_i2c_client(dev);
2081         struct w83793_data *data = i2c_get_clientdata(client);
2082         int i;
2083
2084         mutex_lock(&data->update_lock);
2085
2086         if (!(time_after(jiffies, data->last_updated + HZ * 2)
2087               || !data->valid))
2088                 goto END;
2089
2090         /* Update the voltages measured value and limits */
2091         for (i = 0; i < ARRAY_SIZE(data->in); i++)
2092                 data->in[i][IN_READ] =
2093                     w83793_read_value(client, W83793_REG_IN[i][IN_READ]);
2094
2095         data->in_low_bits[IN_READ] =
2096             w83793_read_value(client, W83793_REG_IN_LOW_BITS[IN_READ]);
2097
2098         for (i = 0; i < ARRAY_SIZE(data->fan); i++) {
2099                 if (!(data->has_fan & (1 << i)))
2100                         continue;
2101                 data->fan[i] =
2102                     w83793_read_value(client, W83793_REG_FAN(i)) << 8;
2103                 data->fan[i] |=
2104                     w83793_read_value(client, W83793_REG_FAN(i) + 1);
2105         }
2106
2107         for (i = 0; i < ARRAY_SIZE(data->temp); i++) {
2108                 if (!(data->has_temp & (1 << i)))
2109                         continue;
2110                 data->temp[i][TEMP_READ] =
2111                     w83793_read_value(client, W83793_REG_TEMP[i][TEMP_READ]);
2112         }
2113
2114         data->temp_low_bits =
2115             w83793_read_value(client, W83793_REG_TEMP_LOW_BITS);
2116
2117         for (i = 0; i < ARRAY_SIZE(data->pwm); i++) {
2118                 if (data->has_pwm & (1 << i))
2119                         data->pwm[i][PWM_DUTY] =
2120                             w83793_read_value(client,
2121                                               W83793_REG_PWM(i, PWM_DUTY));
2122         }
2123
2124         for (i = 0; i < ARRAY_SIZE(data->alarms); i++)
2125                 data->alarms[i] =
2126                     w83793_read_value(client, W83793_REG_ALARM(i));
2127         if (data->has_vid & 0x01)
2128                 data->vid[0] = w83793_read_value(client, W83793_REG_VID_INA);
2129         if (data->has_vid & 0x02)
2130                 data->vid[1] = w83793_read_value(client, W83793_REG_VID_INB);
2131         w83793_update_nonvolatile(dev);
2132         data->last_updated = jiffies;
2133         data->valid = 1;
2134
2135 END:
2136         mutex_unlock(&data->update_lock);
2137         return data;
2138 }
2139
2140 /*
2141  * Ignore the possibility that somebody change bank outside the driver
2142  * Must be called with data->update_lock held, except during initialization
2143  */
2144 static u8 w83793_read_value(struct i2c_client *client, u16 reg)
2145 {
2146         struct w83793_data *data = i2c_get_clientdata(client);
2147         u8 res = 0xff;
2148         u8 new_bank = reg >> 8;
2149
2150         new_bank |= data->bank & 0xfc;
2151         if (data->bank != new_bank) {
2152                 if (i2c_smbus_write_byte_data
2153                     (client, W83793_REG_BANKSEL, new_bank) >= 0)
2154                         data->bank = new_bank;
2155                 else {
2156                         dev_err(&client->dev,
2157                                 "set bank to %d failed, fall back "
2158                                 "to bank %d, read reg 0x%x error\n",
2159                                 new_bank, data->bank, reg);
2160                         res = 0x0;      /* read 0x0 from the chip */
2161                         goto END;
2162                 }
2163         }
2164         res = i2c_smbus_read_byte_data(client, reg & 0xff);
2165 END:
2166         return res;
2167 }
2168
2169 /* Must be called with data->update_lock held, except during initialization */
2170 static int w83793_write_value(struct i2c_client *client, u16 reg, u8 value)
2171 {
2172         struct w83793_data *data = i2c_get_clientdata(client);
2173         int res;
2174         u8 new_bank = reg >> 8;
2175
2176         new_bank |= data->bank & 0xfc;
2177         if (data->bank != new_bank) {
2178                 res = i2c_smbus_write_byte_data(client, W83793_REG_BANKSEL,
2179                                                 new_bank);
2180                 if (res < 0) {
2181                         dev_err(&client->dev,
2182                                 "set bank to %d failed, fall back "
2183                                 "to bank %d, write reg 0x%x error\n",
2184                                 new_bank, data->bank, reg);
2185                         goto END;
2186                 }
2187                 data->bank = new_bank;
2188         }
2189
2190         res = i2c_smbus_write_byte_data(client, reg & 0xff, value);
2191 END:
2192         return res;
2193 }
2194
2195 module_i2c_driver(w83793_driver);
2196
2197 MODULE_AUTHOR("Yuan Mu, Sven Anders");
2198 MODULE_DESCRIPTION("w83793 driver");
2199 MODULE_LICENSE("GPL");