Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable
[pandora-kernel.git] / drivers / hwmon / lm95241.c
1 /*
2  * Copyright (C) 2008, 2010 Davide Rizzo <elpa.rizzo@gmail.com>
3  *
4  * The LM95241 is a sensor chip made by National Semiconductors.
5  * It reports up to three temperatures (its own plus up to two external ones).
6  * Complete datasheet can be obtained from National's website at:
7  *   http://www.national.com/ds.cgi/LM/LM95241.pdf
8  *
9  * This program is free software; you can redistribute it and/or modify
10  * it under the terms of the GNU General Public License as published by
11  * the Free Software Foundation; either version 2 of the License, or
12  * (at your option) any later version.
13  *
14  * This program is distributed in the hope that it will be useful,
15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17  * GNU General Public License for more details.
18  *
19  * You should have received a copy of the GNU General Public License
20  * along with this program; if not, write to the Free Software
21  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
22  */
23
24 #include <linux/module.h>
25 #include <linux/init.h>
26 #include <linux/slab.h>
27 #include <linux/jiffies.h>
28 #include <linux/i2c.h>
29 #include <linux/hwmon.h>
30 #include <linux/hwmon-sysfs.h>
31 #include <linux/err.h>
32 #include <linux/mutex.h>
33 #include <linux/sysfs.h>
34
35 #define DEVNAME "lm95241"
36
37 static const unsigned short normal_i2c[] = {
38         0x19, 0x2a, 0x2b, I2C_CLIENT_END };
39
40 /* LM95241 registers */
41 #define LM95241_REG_R_MAN_ID            0xFE
42 #define LM95241_REG_R_CHIP_ID           0xFF
43 #define LM95241_REG_R_STATUS            0x02
44 #define LM95241_REG_RW_CONFIG           0x03
45 #define LM95241_REG_RW_REM_FILTER       0x06
46 #define LM95241_REG_RW_TRUTHERM         0x07
47 #define LM95241_REG_W_ONE_SHOT          0x0F
48 #define LM95241_REG_R_LOCAL_TEMPH       0x10
49 #define LM95241_REG_R_REMOTE1_TEMPH     0x11
50 #define LM95241_REG_R_REMOTE2_TEMPH     0x12
51 #define LM95241_REG_R_LOCAL_TEMPL       0x20
52 #define LM95241_REG_R_REMOTE1_TEMPL     0x21
53 #define LM95241_REG_R_REMOTE2_TEMPL     0x22
54 #define LM95241_REG_RW_REMOTE_MODEL     0x30
55
56 /* LM95241 specific bitfields */
57 #define CFG_STOP 0x40
58 #define CFG_CR0076 0x00
59 #define CFG_CR0182 0x10
60 #define CFG_CR1000 0x20
61 #define CFG_CR2700 0x30
62 #define R1MS_SHIFT 0
63 #define R2MS_SHIFT 2
64 #define R1MS_MASK (0x01 << (R1MS_SHIFT))
65 #define R2MS_MASK (0x01 << (R2MS_SHIFT))
66 #define R1DF_SHIFT 1
67 #define R2DF_SHIFT 2
68 #define R1DF_MASK (0x01 << (R1DF_SHIFT))
69 #define R2DF_MASK (0x01 << (R2DF_SHIFT))
70 #define R1FE_MASK 0x01
71 #define R2FE_MASK 0x05
72 #define TT1_SHIFT 0
73 #define TT2_SHIFT 4
74 #define TT_OFF 0
75 #define TT_ON 1
76 #define TT_MASK 7
77 #define MANUFACTURER_ID 0x01
78 #define DEFAULT_REVISION 0xA4
79
80 static const u8 lm95241_reg_address[] = {
81         LM95241_REG_R_LOCAL_TEMPH,
82         LM95241_REG_R_LOCAL_TEMPL,
83         LM95241_REG_R_REMOTE1_TEMPH,
84         LM95241_REG_R_REMOTE1_TEMPL,
85         LM95241_REG_R_REMOTE2_TEMPH,
86         LM95241_REG_R_REMOTE2_TEMPL
87 };
88
89 /* Client data (each client gets its own) */
90 struct lm95241_data {
91         struct device *hwmon_dev;
92         struct mutex update_lock;
93         unsigned long last_updated, interval;   /* in jiffies */
94         char valid;             /* zero until following fields are valid */
95         /* registers values */
96         u8 temp[ARRAY_SIZE(lm95241_reg_address)];
97         u8 config, model, trutherm;
98 };
99
100 /* Conversions */
101 static int TempFromReg(u8 val_h, u8 val_l)
102 {
103         if (val_h & 0x80)
104                 return val_h - 0x100;
105         return val_h * 1000 + val_l * 1000 / 256;
106 }
107
108 static struct lm95241_data *lm95241_update_device(struct device *dev)
109 {
110         struct i2c_client *client = to_i2c_client(dev);
111         struct lm95241_data *data = i2c_get_clientdata(client);
112
113         mutex_lock(&data->update_lock);
114
115         if (time_after(jiffies, data->last_updated + data->interval) ||
116             !data->valid) {
117                 int i;
118
119                 dev_dbg(&client->dev, "Updating lm95241 data.\n");
120                 for (i = 0; i < ARRAY_SIZE(lm95241_reg_address); i++)
121                         data->temp[i]
122                           = i2c_smbus_read_byte_data(client,
123                                                      lm95241_reg_address[i]);
124                 data->last_updated = jiffies;
125                 data->valid = 1;
126         }
127
128         mutex_unlock(&data->update_lock);
129
130         return data;
131 }
132
133 /* Sysfs stuff */
134 static ssize_t show_input(struct device *dev, struct device_attribute *attr,
135                           char *buf)
136 {
137         struct lm95241_data *data = lm95241_update_device(dev);
138
139         return snprintf(buf, PAGE_SIZE - 1, "%d\n",
140                 TempFromReg(data->temp[to_sensor_dev_attr(attr)->index],
141                             data->temp[to_sensor_dev_attr(attr)->index + 1]));
142 }
143
144 static ssize_t show_type(struct device *dev, struct device_attribute *attr,
145                          char *buf)
146 {
147         struct i2c_client *client = to_i2c_client(dev);
148         struct lm95241_data *data = i2c_get_clientdata(client);
149
150         return snprintf(buf, PAGE_SIZE - 1,
151                 data->model & to_sensor_dev_attr(attr)->index ? "1\n" : "2\n");
152 }
153
154 static ssize_t set_type(struct device *dev, struct device_attribute *attr,
155                         const char *buf, size_t count)
156 {
157         struct i2c_client *client = to_i2c_client(dev);
158         struct lm95241_data *data = i2c_get_clientdata(client);
159         unsigned long val;
160         int shift;
161         u8 mask = to_sensor_dev_attr(attr)->index;
162
163         if (strict_strtoul(buf, 10, &val) < 0)
164                 return -EINVAL;
165         if (val != 1 && val != 2)
166                 return -EINVAL;
167
168         shift = mask == R1MS_MASK ? TT1_SHIFT : TT2_SHIFT;
169
170         mutex_lock(&data->update_lock);
171
172         data->trutherm &= ~(TT_MASK << shift);
173         if (val == 1) {
174                 data->model |= mask;
175                 data->trutherm |= (TT_ON << shift);
176         } else {
177                 data->model &= ~mask;
178                 data->trutherm |= (TT_OFF << shift);
179         }
180         data->valid = 0;
181
182         i2c_smbus_write_byte_data(client, LM95241_REG_RW_REMOTE_MODEL,
183                                   data->model);
184         i2c_smbus_write_byte_data(client, LM95241_REG_RW_TRUTHERM,
185                                   data->trutherm);
186
187         mutex_unlock(&data->update_lock);
188
189         return count;
190 }
191
192 static ssize_t show_min(struct device *dev, struct device_attribute *attr,
193                         char *buf)
194 {
195         struct i2c_client *client = to_i2c_client(dev);
196         struct lm95241_data *data = i2c_get_clientdata(client);
197
198         return snprintf(buf, PAGE_SIZE - 1,
199                         data->config & to_sensor_dev_attr(attr)->index ?
200                         "-127000\n" : "0\n");
201 }
202
203 static ssize_t set_min(struct device *dev, struct device_attribute *attr,
204                        const char *buf, size_t count)
205 {
206         struct i2c_client *client = to_i2c_client(dev);
207         struct lm95241_data *data = i2c_get_clientdata(client);
208         long val;
209
210         if (strict_strtol(buf, 10, &val) < 0)
211                 return -EINVAL;
212         if (val < -128000)
213                 return -EINVAL;
214
215         mutex_lock(&data->update_lock);
216
217         if (val < 0)
218                 data->config |= to_sensor_dev_attr(attr)->index;
219         else
220                 data->config &= ~to_sensor_dev_attr(attr)->index;
221         data->valid = 0;
222
223         i2c_smbus_write_byte_data(client, LM95241_REG_RW_CONFIG, data->config);
224
225         mutex_unlock(&data->update_lock);
226
227         return count;
228 }
229
230 static ssize_t show_max(struct device *dev, struct device_attribute *attr,
231                         char *buf)
232 {
233         struct i2c_client *client = to_i2c_client(dev);
234         struct lm95241_data *data = i2c_get_clientdata(client);
235
236         return snprintf(buf, PAGE_SIZE - 1,
237                         data->config & to_sensor_dev_attr(attr)->index ?
238                         "127000\n" : "255000\n");
239 }
240
241 static ssize_t set_max(struct device *dev, struct device_attribute *attr,
242                        const char *buf, size_t count)
243 {
244         struct i2c_client *client = to_i2c_client(dev);
245         struct lm95241_data *data = i2c_get_clientdata(client);
246         long val;
247
248         if (strict_strtol(buf, 10, &val) < 0)
249                 return -EINVAL;
250         if (val >= 256000)
251                 return -EINVAL;
252
253         mutex_lock(&data->update_lock);
254
255         if (val <= 127000)
256                 data->config |= to_sensor_dev_attr(attr)->index;
257         else
258                 data->config &= ~to_sensor_dev_attr(attr)->index;
259         data->valid = 0;
260
261         i2c_smbus_write_byte_data(client, LM95241_REG_RW_CONFIG, data->config);
262
263         mutex_unlock(&data->update_lock);
264
265         return count;
266 }
267
268 static ssize_t show_interval(struct device *dev, struct device_attribute *attr,
269                              char *buf)
270 {
271         struct lm95241_data *data = lm95241_update_device(dev);
272
273         return snprintf(buf, PAGE_SIZE - 1, "%lu\n", 1000 * data->interval
274                         / HZ);
275 }
276
277 static ssize_t set_interval(struct device *dev, struct device_attribute *attr,
278                             const char *buf, size_t count)
279 {
280         struct i2c_client *client = to_i2c_client(dev);
281         struct lm95241_data *data = i2c_get_clientdata(client);
282         unsigned long val;
283
284         if (strict_strtoul(buf, 10, &val) < 0)
285                 return -EINVAL;
286
287         data->interval = val * HZ / 1000;
288
289         return count;
290 }
291
292 static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_input, NULL, 0);
293 static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_input, NULL, 2);
294 static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_input, NULL, 4);
295 static SENSOR_DEVICE_ATTR(temp2_type, S_IWUSR | S_IRUGO, show_type, set_type,
296                           R1MS_MASK);
297 static SENSOR_DEVICE_ATTR(temp3_type, S_IWUSR | S_IRUGO, show_type, set_type,
298                           R2MS_MASK);
299 static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_min, set_min,
300                           R1DF_MASK);
301 static SENSOR_DEVICE_ATTR(temp3_min, S_IWUSR | S_IRUGO, show_min, set_min,
302                           R2DF_MASK);
303 static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_max, set_max,
304                           R1DF_MASK);
305 static SENSOR_DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_max, set_max,
306                           R2DF_MASK);
307 static DEVICE_ATTR(update_interval, S_IWUSR | S_IRUGO, show_interval,
308                    set_interval);
309
310 static struct attribute *lm95241_attributes[] = {
311         &sensor_dev_attr_temp1_input.dev_attr.attr,
312         &sensor_dev_attr_temp2_input.dev_attr.attr,
313         &sensor_dev_attr_temp3_input.dev_attr.attr,
314         &sensor_dev_attr_temp2_type.dev_attr.attr,
315         &sensor_dev_attr_temp3_type.dev_attr.attr,
316         &sensor_dev_attr_temp2_min.dev_attr.attr,
317         &sensor_dev_attr_temp3_min.dev_attr.attr,
318         &sensor_dev_attr_temp2_max.dev_attr.attr,
319         &sensor_dev_attr_temp3_max.dev_attr.attr,
320         &dev_attr_update_interval.attr,
321         NULL
322 };
323
324 static const struct attribute_group lm95241_group = {
325         .attrs = lm95241_attributes,
326 };
327
328 /* Return 0 if detection is successful, -ENODEV otherwise */
329 static int lm95241_detect(struct i2c_client *new_client,
330                           struct i2c_board_info *info)
331 {
332         struct i2c_adapter *adapter = new_client->adapter;
333         int address = new_client->addr;
334         const char *name;
335
336         if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
337                 return -ENODEV;
338
339         if ((i2c_smbus_read_byte_data(new_client, LM95241_REG_R_MAN_ID)
340              == MANUFACTURER_ID)
341             && (i2c_smbus_read_byte_data(new_client, LM95241_REG_R_CHIP_ID)
342                 >= DEFAULT_REVISION)) {
343                 name = DEVNAME;
344         } else {
345                 dev_dbg(&adapter->dev, "LM95241 detection failed at 0x%02x\n",
346                         address);
347                 return -ENODEV;
348         }
349
350         /* Fill the i2c board info */
351         strlcpy(info->type, name, I2C_NAME_SIZE);
352         return 0;
353 }
354
355 static void lm95241_init_client(struct i2c_client *client)
356 {
357         struct lm95241_data *data = i2c_get_clientdata(client);
358
359         data->interval = HZ;    /* 1 sec default */
360         data->valid = 0;
361         data->config = CFG_CR0076;
362         data->model = 0;
363         data->trutherm = (TT_OFF << TT1_SHIFT) | (TT_OFF << TT2_SHIFT);
364
365         i2c_smbus_write_byte_data(client, LM95241_REG_RW_CONFIG, data->config);
366         i2c_smbus_write_byte_data(client, LM95241_REG_RW_REM_FILTER,
367                                   R1FE_MASK | R2FE_MASK);
368         i2c_smbus_write_byte_data(client, LM95241_REG_RW_TRUTHERM,
369                                   data->trutherm);
370         i2c_smbus_write_byte_data(client, LM95241_REG_RW_REMOTE_MODEL,
371                                   data->model);
372 }
373
374 static int lm95241_probe(struct i2c_client *new_client,
375                          const struct i2c_device_id *id)
376 {
377         struct lm95241_data *data;
378         int err;
379
380         data = kzalloc(sizeof(struct lm95241_data), GFP_KERNEL);
381         if (!data) {
382                 err = -ENOMEM;
383                 goto exit;
384         }
385
386         i2c_set_clientdata(new_client, data);
387         mutex_init(&data->update_lock);
388
389         /* Initialize the LM95241 chip */
390         lm95241_init_client(new_client);
391
392         /* Register sysfs hooks */
393         err = sysfs_create_group(&new_client->dev.kobj, &lm95241_group);
394         if (err)
395                 goto exit_free;
396
397         data->hwmon_dev = hwmon_device_register(&new_client->dev);
398         if (IS_ERR(data->hwmon_dev)) {
399                 err = PTR_ERR(data->hwmon_dev);
400                 goto exit_remove_files;
401         }
402
403         return 0;
404
405 exit_remove_files:
406         sysfs_remove_group(&new_client->dev.kobj, &lm95241_group);
407 exit_free:
408         kfree(data);
409 exit:
410         return err;
411 }
412
413 static int lm95241_remove(struct i2c_client *client)
414 {
415         struct lm95241_data *data = i2c_get_clientdata(client);
416
417         hwmon_device_unregister(data->hwmon_dev);
418         sysfs_remove_group(&client->dev.kobj, &lm95241_group);
419
420         kfree(data);
421         return 0;
422 }
423
424 /* Driver data (common to all clients) */
425 static const struct i2c_device_id lm95241_id[] = {
426         { DEVNAME, 0 },
427         { }
428 };
429 MODULE_DEVICE_TABLE(i2c, lm95241_id);
430
431 static struct i2c_driver lm95241_driver = {
432         .class          = I2C_CLASS_HWMON,
433         .driver = {
434                 .name   = DEVNAME,
435         },
436         .probe          = lm95241_probe,
437         .remove         = lm95241_remove,
438         .id_table       = lm95241_id,
439         .detect         = lm95241_detect,
440         .address_list   = normal_i2c,
441 };
442
443 static int __init sensors_lm95241_init(void)
444 {
445         return i2c_add_driver(&lm95241_driver);
446 }
447
448 static void __exit sensors_lm95241_exit(void)
449 {
450         i2c_del_driver(&lm95241_driver);
451 }
452
453 MODULE_AUTHOR("Davide Rizzo <elpa.rizzo@gmail.com>");
454 MODULE_DESCRIPTION("LM95241 sensor driver");
455 MODULE_LICENSE("GPL");
456
457 module_init(sensors_lm95241_init);
458 module_exit(sensors_lm95241_exit);