drivers/gpu/drm/i915/intel_dp.c

   1 /*
   2  * Copyright © 2008 Intel Corporation
   3  *
   4  * Permission is hereby granted, free of charge, to any person obtaining a
   5  * copy of this software and associated documentation files (the "Software"),
   6  * to deal in the Software without restriction, including without limitation
   7  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
   8  * and/or sell copies of the Software, and to permit persons to whom the
   9  * Software is furnished to do so, subject to the following conditions:
  10  *
  11  * The above copyright notice and this permission notice (including the next
  12  * paragraph) shall be included in all copies or substantial portions of the
  13  * Software.
  14  *
  15  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  16  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  17  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
  18  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  19  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  20  * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
  21  * IN THE SOFTWARE.
  22  *
  23  * Authors:
  24  *    Keith Packard <keithp@keithp.com>
  25  *
  26  */
  27
  28 #include <linux/i2c.h>
  29 #include <linux/slab.h>
  30 #include "drmP.h"
  31 #include "drm.h"
  32 #include "drm_crtc.h"
  33 #include "drm_crtc_helper.h"
  34 #include "intel_drv.h"
  35 #include "i915_drm.h"
  36 #include "i915_drv.h"
  37 #include "drm_dp_helper.h"
  38
  39
  40 #define DP_LINK_STATUS_SIZE     6
  41 #define DP_LINK_CHECK_TIMEOUT   (10 * 1000)
  42
  43 #define DP_LINK_CONFIGURATION_SIZE      9
  44
  45 struct intel_dp {
  46         struct intel_encoder base;
  47         uint32_t output_reg;
  48         uint32_t DP;
  49         uint8_t  link_configuration[DP_LINK_CONFIGURATION_SIZE];
  50         bool has_audio;
  51         int force_audio;
  52         uint32_t color_range;
  53         int dpms_mode;
  54         uint8_t link_bw;
  55         uint8_t lane_count;
  56         uint8_t dpcd[8];
  57         struct i2c_adapter adapter;
  58         struct i2c_algo_dp_aux_data algo;
  59         bool is_pch_edp;
  60         uint8_t train_set[4];
  61         uint8_t link_status[DP_LINK_STATUS_SIZE];
  62 };
  63
  64 /**
  65  * is_edp - is the given port attached to an eDP panel (either CPU or PCH)
  66  * @intel_dp: DP struct
  67  *
  68  * If a CPU or PCH DP output is attached to an eDP panel, this function
  69  * will return true, and false otherwise.
  70  */
  71 static bool is_edp(struct intel_dp *intel_dp)
  72 {
  73         return intel_dp->base.type == INTEL_OUTPUT_EDP;
  74 }
  75
  76 /**
  77  * is_pch_edp - is the port on the PCH and attached to an eDP panel?
  78  * @intel_dp: DP struct
  79  *
  80  * Returns true if the given DP struct corresponds to a PCH DP port attached
  81  * to an eDP panel, false otherwise.  Helpful for determining whether we
  82  * may need FDI resources for a given DP output or not.
  83  */
  84 static bool is_pch_edp(struct intel_dp *intel_dp)
  85 {
  86         return intel_dp->is_pch_edp;
  87 }
  88
  89 static struct intel_dp *enc_to_intel_dp(struct drm_encoder *encoder)
  90 {
  91         return container_of(encoder, struct intel_dp, base.base);
  92 }
  93
  94 static struct intel_dp *intel_attached_dp(struct drm_connector *connector)
  95 {
  96         return container_of(intel_attached_encoder(connector),
  97                             struct intel_dp, base);
  98 }
  99
 100 /**
 101  * intel_encoder_is_pch_edp - is the given encoder a PCH attached eDP?
 102  * @encoder: DRM encoder
 103  *
 104  * Return true if @encoder corresponds to a PCH attached eDP panel.  Needed
 105  * by intel_display.c.
 106  */
 107 bool intel_encoder_is_pch_edp(struct drm_encoder *encoder)
 108 {
 109         struct intel_dp *intel_dp;
 110
 111         if (!encoder)
 112                 return false;
 113
 114         intel_dp = enc_to_intel_dp(encoder);
 115
 116         return is_pch_edp(intel_dp);
 117 }
 118
 119 static void intel_dp_start_link_train(struct intel_dp *intel_dp);
 120 static void intel_dp_complete_link_train(struct intel_dp *intel_dp);
 121 static void intel_dp_link_down(struct intel_dp *intel_dp);
 122
 123 void
 124 intel_edp_link_config (struct intel_encoder *intel_encoder,
 125                        int *lane_num, int *link_bw)
 126 {
 127         struct intel_dp *intel_dp = container_of(intel_encoder, struct intel_dp, base);
 128
 129         *lane_num = intel_dp->lane_count;
 130         if (intel_dp->link_bw == DP_LINK_BW_1_62)
 131                 *link_bw = 162000;
 132         else if (intel_dp->link_bw == DP_LINK_BW_2_7)
 133                 *link_bw = 270000;
 134 }
 135
 136 static int
 137 intel_dp_max_lane_count(struct intel_dp *intel_dp)
 138 {
 139         int max_lane_count = 4;
 140
 141         if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11) {
 142                 max_lane_count = intel_dp->dpcd[DP_MAX_LANE_COUNT] & 0x1f;
 143                 switch (max_lane_count) {
 144                 case 1: case 2: case 4:
 145                         break;
 146                 default:
 147                         max_lane_count = 4;
 148                 }
 149         }
 150         return max_lane_count;
 151 }
 152
 153 static int
 154 intel_dp_max_link_bw(struct intel_dp *intel_dp)
 155 {
 156         int max_link_bw = intel_dp->dpcd[DP_MAX_LINK_RATE];
 157
 158         switch (max_link_bw) {
 159         case DP_LINK_BW_1_62:
 160         case DP_LINK_BW_2_7:
 161                 break;
 162         default:
 163                 max_link_bw = DP_LINK_BW_1_62;
 164                 break;
 165         }
 166         return max_link_bw;
 167 }
 168
 169 static int
 170 intel_dp_link_clock(uint8_t link_bw)
 171 {
 172         if (link_bw == DP_LINK_BW_2_7)
 173                 return 270000;
 174         else
 175                 return 162000;
 176 }
 177
 178 /* I think this is a fiction */
 179 static int
 180 intel_dp_link_required(struct drm_device *dev, struct intel_dp *intel_dp, int pixel_clock)
 181 {
 182         struct drm_crtc *crtc = intel_dp->base.base.crtc;
 183         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 184         int bpp = 24;
 185
 186         if (intel_crtc)
 187                 bpp = intel_crtc->bpp;
 188
 189         return (pixel_clock * bpp + 7) / 8;
 190 }
 191
 192 static int
 193 intel_dp_max_data_rate(int max_link_clock, int max_lanes)
 194 {
 195         return (max_link_clock * max_lanes * 8) / 10;
 196 }
 197
 198 static int
 199 intel_dp_mode_valid(struct drm_connector *connector,
 200                     struct drm_display_mode *mode)
 201 {
 202         struct intel_dp *intel_dp = intel_attached_dp(connector);
 203         struct drm_device *dev = connector->dev;
 204         struct drm_i915_private *dev_priv = dev->dev_private;
 205         int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_dp));
 206         int max_lanes = intel_dp_max_lane_count(intel_dp);
 207
 208         if (is_edp(intel_dp) && dev_priv->panel_fixed_mode) {
 209                 if (mode->hdisplay > dev_priv->panel_fixed_mode->hdisplay)
 210                         return MODE_PANEL;
 211
 212                 if (mode->vdisplay > dev_priv->panel_fixed_mode->vdisplay)
 213                         return MODE_PANEL;
 214         }
 215
 216         /* only refuse the mode on non eDP since we have seen some weird eDP panels
 217            which are outside spec tolerances but somehow work by magic */
 218         if (!is_edp(intel_dp) &&
 219             (intel_dp_link_required(connector->dev, intel_dp, mode->clock)
 220              > intel_dp_max_data_rate(max_link_clock, max_lanes)))
 221                 return MODE_CLOCK_HIGH;
 222
 223         if (mode->clock < 10000)
 224                 return MODE_CLOCK_LOW;
 225
 226         return MODE_OK;
 227 }
 228
 229 static uint32_t
 230 pack_aux(uint8_t *src, int src_bytes)
 231 {
 232         int     i;
 233         uint32_t v = 0;
 234
 235         if (src_bytes > 4)
 236                 src_bytes = 4;
 237         for (i = 0; i < src_bytes; i++)
 238                 v |= ((uint32_t) src[i]) << ((3-i) * 8);
 239         return v;
 240 }
 241
 242 static void
 243 unpack_aux(uint32_t src, uint8_t *dst, int dst_bytes)
 244 {
 245         int i;
 246         if (dst_bytes > 4)
 247                 dst_bytes = 4;
 248         for (i = 0; i < dst_bytes; i++)
 249                 dst[i] = src >> ((3-i) * 8);
 250 }
 251
 252 /* hrawclock is 1/4 the FSB frequency */
 253 static int
 254 intel_hrawclk(struct drm_device *dev)
 255 {
 256         struct drm_i915_private *dev_priv = dev->dev_private;
 257         uint32_t clkcfg;
 258
 259         clkcfg = I915_READ(CLKCFG);
 260         switch (clkcfg & CLKCFG_FSB_MASK) {
 261         case CLKCFG_FSB_400:
 262                 return 100;
 263         case CLKCFG_FSB_533:
 264                 return 133;
 265         case CLKCFG_FSB_667:
 266                 return 166;
 267         case CLKCFG_FSB_800:
 268                 return 200;
 269         case CLKCFG_FSB_1067:
 270                 return 266;
 271         case CLKCFG_FSB_1333:
 272                 return 333;
 273         /* these two are just a guess; one of them might be right */
 274         case CLKCFG_FSB_1600:
 275         case CLKCFG_FSB_1600_ALT:
 276                 return 400;
 277         default:
 278                 return 133;
 279         }
 280 }
 281
 282 static int
 283 intel_dp_aux_ch(struct intel_dp *intel_dp,
 284                 uint8_t *send, int send_bytes,
 285                 uint8_t *recv, int recv_size)
 286 {
 287         uint32_t output_reg = intel_dp->output_reg;
 288         struct drm_device *dev = intel_dp->base.base.dev;
 289         struct drm_i915_private *dev_priv = dev->dev_private;
 290         uint32_t ch_ctl = output_reg + 0x10;
 291         uint32_t ch_data = ch_ctl + 4;
 292         int i;
 293         int recv_bytes;
 294         uint32_t status;
 295         uint32_t aux_clock_divider;
 296         int try, precharge;
 297
 298         /* The clock divider is based off the hrawclk,
 299          * and would like to run at 2MHz. So, take the
 300          * hrawclk value and divide by 2 and use that
 301          *
 302          * Note that PCH attached eDP panels should use a 125MHz input
 303          * clock divider.
 304          */
 305         if (is_edp(intel_dp) && !is_pch_edp(intel_dp)) {
 306                 if (IS_GEN6(dev))
 307                         aux_clock_divider = 200; /* SNB eDP input clock at 400Mhz */
 308                 else
 309                         aux_clock_divider = 225; /* eDP input clock at 450Mhz */
 310         } else if (HAS_PCH_SPLIT(dev))
 311                 aux_clock_divider = 62; /* IRL input clock fixed at 125Mhz */
 312         else
 313                 aux_clock_divider = intel_hrawclk(dev) / 2;
 314
 315         if (IS_GEN6(dev))
 316                 precharge = 3;
 317         else
 318                 precharge = 5;
 319
 320         /* Try to wait for any previous AUX channel activity */
 321         for (try = 0; try < 3; try++) {
 322                 status = I915_READ(ch_ctl);
 323                 if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0)
 324                         break;
 325                 msleep(1);
 326         }
 327
 328         if (try == 3) {
 329                 WARN(1, "dp_aux_ch not started status 0x%08x\n",
 330                      I915_READ(ch_ctl));
 331                 return -EBUSY;
 332         }
 333
 334         /* Must try at least 3 times according to DP spec */
 335         for (try = 0; try < 5; try++) {
 336                 /* Load the send data into the aux channel data registers */
 337                 for (i = 0; i < send_bytes; i += 4)
 338                         I915_WRITE(ch_data + i,
 339                                    pack_aux(send + i, send_bytes - i));
 340
 341                 /* Send the command and wait for it to complete */
 342                 I915_WRITE(ch_ctl,
 343                            DP_AUX_CH_CTL_SEND_BUSY |
 344                            DP_AUX_CH_CTL_TIME_OUT_400us |
 345                            (send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) |
 346                            (precharge << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) |
 347                            (aux_clock_divider << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT) |
 348                            DP_AUX_CH_CTL_DONE |
 349                            DP_AUX_CH_CTL_TIME_OUT_ERROR |
 350                            DP_AUX_CH_CTL_RECEIVE_ERROR);
 351                 for (;;) {
 352                         status = I915_READ(ch_ctl);
 353                         if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0)
 354                                 break;
 355                         udelay(100);
 356                 }
 357
 358                 /* Clear done status and any errors */
 359                 I915_WRITE(ch_ctl,
 360                            status |
 361                            DP_AUX_CH_CTL_DONE |
 362                            DP_AUX_CH_CTL_TIME_OUT_ERROR |
 363                            DP_AUX_CH_CTL_RECEIVE_ERROR);
 364                 if (status & DP_AUX_CH_CTL_DONE)
 365                         break;
 366         }
 367
 368         if ((status & DP_AUX_CH_CTL_DONE) == 0) {
 369                 DRM_ERROR("dp_aux_ch not done status 0x%08x\n", status);
 370                 return -EBUSY;
 371         }
 372
 373         /* Check for timeout or receive error.
 374          * Timeouts occur when the sink is not connected
 375          */
 376         if (status & DP_AUX_CH_CTL_RECEIVE_ERROR) {
 377                 DRM_ERROR("dp_aux_ch receive error status 0x%08x\n", status);
 378                 return -EIO;
 379         }
 380
 381         /* Timeouts occur when the device isn't connected, so they're
 382          * "normal" -- don't fill the kernel log with these */
 383         if (status & DP_AUX_CH_CTL_TIME_OUT_ERROR) {
 384                 DRM_DEBUG_KMS("dp_aux_ch timeout status 0x%08x\n", status);
 385                 return -ETIMEDOUT;
 386         }
 387
 388         /* Unload any bytes sent back from the other side */
 389         recv_bytes = ((status & DP_AUX_CH_CTL_MESSAGE_SIZE_MASK) >>
 390                       DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT);
 391         if (recv_bytes > recv_size)
 392                 recv_bytes = recv_size;
 393
 394         for (i = 0; i < recv_bytes; i += 4)
 395                 unpack_aux(I915_READ(ch_data + i),
 396                            recv + i, recv_bytes - i);
 397
 398         return recv_bytes;
 399 }
 400
 401 /* Write data to the aux channel in native mode */
 402 static int
 403 intel_dp_aux_native_write(struct intel_dp *intel_dp,
 404                           uint16_t address, uint8_t *send, int send_bytes)
 405 {
 406         int ret;
 407         uint8_t msg[20];
 408         int msg_bytes;
 409         uint8_t ack;
 410
 411         if (send_bytes > 16)
 412                 return -1;
 413         msg[0] = AUX_NATIVE_WRITE << 4;
 414         msg[1] = address >> 8;
 415         msg[2] = address & 0xff;
 416         msg[3] = send_bytes - 1;
 417         memcpy(&msg[4], send, send_bytes);
 418         msg_bytes = send_bytes + 4;
 419         for (;;) {
 420                 ret = intel_dp_aux_ch(intel_dp, msg, msg_bytes, &ack, 1);
 421                 if (ret < 0)
 422                         return ret;
 423                 if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK)
 424                         break;
 425                 else if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_DEFER)
 426                         udelay(100);
 427                 else
 428                         return -EIO;
 429         }
 430         return send_bytes;
 431 }
 432
 433 /* Write a single byte to the aux channel in native mode */
 434 static int
 435 intel_dp_aux_native_write_1(struct intel_dp *intel_dp,
 436                             uint16_t address, uint8_t byte)
 437 {
 438         return intel_dp_aux_native_write(intel_dp, address, &byte, 1);
 439 }
 440
 441 /* read bytes from a native aux channel */
 442 static int
 443 intel_dp_aux_native_read(struct intel_dp *intel_dp,
 444                          uint16_t address, uint8_t *recv, int recv_bytes)
 445 {
 446         uint8_t msg[4];
 447         int msg_bytes;
 448         uint8_t reply[20];
 449         int reply_bytes;
 450         uint8_t ack;
 451         int ret;
 452
 453         msg[0] = AUX_NATIVE_READ << 4;
 454         msg[1] = address >> 8;
 455         msg[2] = address & 0xff;
 456         msg[3] = recv_bytes - 1;
 457
 458         msg_bytes = 4;
 459         reply_bytes = recv_bytes + 1;
 460
 461         for (;;) {
 462                 ret = intel_dp_aux_ch(intel_dp, msg, msg_bytes,
 463                                       reply, reply_bytes);
 464                 if (ret == 0)
 465                         return -EPROTO;
 466                 if (ret < 0)
 467                         return ret;
 468                 ack = reply[0];
 469                 if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK) {
 470                         memcpy(recv, reply + 1, ret - 1);
 471                         return ret - 1;
 472                 }
 473                 else if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_DEFER)
 474                         udelay(100);
 475                 else
 476                         return -EIO;
 477         }
 478 }
 479
 480 static int
 481 intel_dp_i2c_aux_ch(struct i2c_adapter *adapter, int mode,
 482                     uint8_t write_byte, uint8_t *read_byte)
 483 {
 484         struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
 485         struct intel_dp *intel_dp = container_of(adapter,
 486                                                 struct intel_dp,
 487                                                 adapter);
 488         uint16_t address = algo_data->address;
 489         uint8_t msg[5];
 490         uint8_t reply[2];
 491         unsigned retry;
 492         int msg_bytes;
 493         int reply_bytes;
 494         int ret;
 495
 496         /* Set up the command byte */
 497         if (mode & MODE_I2C_READ)
 498                 msg[0] = AUX_I2C_READ << 4;
 499         else
 500                 msg[0] = AUX_I2C_WRITE << 4;
 501
 502         if (!(mode & MODE_I2C_STOP))
 503                 msg[0] |= AUX_I2C_MOT << 4;
 504
 505         msg[1] = address >> 8;
 506         msg[2] = address;
 507
 508         switch (mode) {
 509         case MODE_I2C_WRITE:
 510                 msg[3] = 0;
 511                 msg[4] = write_byte;
 512                 msg_bytes = 5;
 513                 reply_bytes = 1;
 514                 break;
 515         case MODE_I2C_READ:
 516                 msg[3] = 0;
 517                 msg_bytes = 4;
 518                 reply_bytes = 2;
 519                 break;
 520         default:
 521                 msg_bytes = 3;
 522                 reply_bytes = 1;
 523                 break;
 524         }
 525
 526         for (retry = 0; retry < 5; retry++) {
 527                 ret = intel_dp_aux_ch(intel_dp,
 528                                       msg, msg_bytes,
 529                                       reply, reply_bytes);
 530                 if (ret < 0) {
 531                         DRM_DEBUG_KMS("aux_ch failed %d\n", ret);
 532                         return ret;
 533                 }
 534
 535                 switch (reply[0] & AUX_NATIVE_REPLY_MASK) {
 536                 case AUX_NATIVE_REPLY_ACK:
 537                         /* I2C-over-AUX Reply field is only valid
 538                          * when paired with AUX ACK.
 539                          */
 540                         break;
 541                 case AUX_NATIVE_REPLY_NACK:
 542                         DRM_DEBUG_KMS("aux_ch native nack\n");
 543                         return -EREMOTEIO;
 544                 case AUX_NATIVE_REPLY_DEFER:
 545                         udelay(100);
 546                         continue;
 547                 default:
 548                         DRM_ERROR("aux_ch invalid native reply 0x%02x\n",
 549                                   reply[0]);
 550                         return -EREMOTEIO;
 551                 }
 552
 553                 switch (reply[0] & AUX_I2C_REPLY_MASK) {
 554                 case AUX_I2C_REPLY_ACK:
 555                         if (mode == MODE_I2C_READ) {
 556                                 *read_byte = reply[1];
 557                         }
 558                         return reply_bytes - 1;
 559                 case AUX_I2C_REPLY_NACK:
 560                         DRM_DEBUG_KMS("aux_i2c nack\n");
 561                         return -EREMOTEIO;
 562                 case AUX_I2C_REPLY_DEFER:
 563                         DRM_DEBUG_KMS("aux_i2c defer\n");
 564                         udelay(100);
 565                         break;
 566                 default:
 567                         DRM_ERROR("aux_i2c invalid reply 0x%02x\n", reply[0]);
 568                         return -EREMOTEIO;
 569                 }
 570         }
 571
 572         DRM_ERROR("too many retries, giving up\n");
 573         return -EREMOTEIO;
 574 }
 575
 576 static int
 577 intel_dp_i2c_init(struct intel_dp *intel_dp,
 578                   struct intel_connector *intel_connector, const char *name)
 579 {
 580         DRM_DEBUG_KMS("i2c_init %s\n", name);
 581         intel_dp->algo.running = false;
 582         intel_dp->algo.address = 0;
 583         intel_dp->algo.aux_ch = intel_dp_i2c_aux_ch;
 584
 585         memset(&intel_dp->adapter, '\0', sizeof (intel_dp->adapter));
 586         intel_dp->adapter.owner = THIS_MODULE;
 587         intel_dp->adapter.class = I2C_CLASS_DDC;
 588         strncpy (intel_dp->adapter.name, name, sizeof(intel_dp->adapter.name) - 1);
 589         intel_dp->adapter.name[sizeof(intel_dp->adapter.name) - 1] = '\0';
 590         intel_dp->adapter.algo_data = &intel_dp->algo;
 591         intel_dp->adapter.dev.parent = &intel_connector->base.kdev;
 592
 593         return i2c_dp_aux_add_bus(&intel_dp->adapter);
 594 }
 595
 596 static bool
 597 intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode,
 598                     struct drm_display_mode *adjusted_mode)
 599 {
 600         struct drm_device *dev = encoder->dev;
 601         struct drm_i915_private *dev_priv = dev->dev_private;
 602         struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
 603         int lane_count, clock;
 604         int max_lane_count = intel_dp_max_lane_count(intel_dp);
 605         int max_clock = intel_dp_max_link_bw(intel_dp) == DP_LINK_BW_2_7 ? 1 : 0;
 606         static int bws[2] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7 };
 607
 608         if (is_edp(intel_dp) && dev_priv->panel_fixed_mode) {
 609                 intel_fixed_panel_mode(dev_priv->panel_fixed_mode, adjusted_mode);
 610                 intel_pch_panel_fitting(dev, DRM_MODE_SCALE_FULLSCREEN,
 611                                         mode, adjusted_mode);
 612                 /*
 613                  * the mode->clock is used to calculate the Data&Link M/N
 614                  * of the pipe. For the eDP the fixed clock should be used.
 615                  */
 616                 mode->clock = dev_priv->panel_fixed_mode->clock;
 617         }
 618
 619         for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) {
 620                 for (clock = 0; clock <= max_clock; clock++) {
 621                         int link_avail = intel_dp_max_data_rate(intel_dp_link_clock(bws[clock]), lane_count);
 622
 623                         if (intel_dp_link_required(encoder->dev, intel_dp, mode->clock)
 624                                         <= link_avail) {
 625                                 intel_dp->link_bw = bws[clock];
 626                                 intel_dp->lane_count = lane_count;
 627                                 adjusted_mode->clock = intel_dp_link_clock(intel_dp->link_bw);
 628                                 DRM_DEBUG_KMS("Display port link bw %02x lane "
 629                                                 "count %d clock %d\n",
 630                                        intel_dp->link_bw, intel_dp->lane_count,
 631                                        adjusted_mode->clock);
 632                                 return true;
 633                         }
 634                 }
 635         }
 636
 637         if (is_edp(intel_dp)) {
 638                 /* okay we failed just pick the highest */
 639                 intel_dp->lane_count = max_lane_count;
 640                 intel_dp->link_bw = bws[max_clock];
 641                 adjusted_mode->clock = intel_dp_link_clock(intel_dp->link_bw);
 642                 DRM_DEBUG_KMS("Force picking display port link bw %02x lane "
 643                               "count %d clock %d\n",
 644                               intel_dp->link_bw, intel_dp->lane_count,
 645                               adjusted_mode->clock);
 646
 647                 return true;
 648         }
 649
 650         return false;
 651 }
 652
 653 struct intel_dp_m_n {
 654         uint32_t        tu;
 655         uint32_t        gmch_m;
 656         uint32_t        gmch_n;
 657         uint32_t        link_m;
 658         uint32_t        link_n;
 659 };
 660
 661 static void
 662 intel_reduce_ratio(uint32_t *num, uint32_t *den)
 663 {
 664         while (*num > 0xffffff || *den > 0xffffff) {
 665                 *num >>= 1;
 666                 *den >>= 1;
 667         }
 668 }
 669
 670 static void
 671 intel_dp_compute_m_n(int bpp,
 672                      int nlanes,
 673                      int pixel_clock,
 674                      int link_clock,
 675                      struct intel_dp_m_n *m_n)
 676 {
 677         m_n->tu = 64;
 678         m_n->gmch_m = (pixel_clock * bpp) >> 3;
 679         m_n->gmch_n = link_clock * nlanes;
 680         intel_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
 681         m_n->link_m = pixel_clock;
 682         m_n->link_n = link_clock;
 683         intel_reduce_ratio(&m_n->link_m, &m_n->link_n);
 684 }
 685
 686 void
 687 intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
 688                  struct drm_display_mode *adjusted_mode)
 689 {
 690         struct drm_device *dev = crtc->dev;
 691         struct drm_mode_config *mode_config = &dev->mode_config;
 692         struct drm_encoder *encoder;
 693         struct drm_i915_private *dev_priv = dev->dev_private;
 694         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 695         int lane_count = 4;
 696         struct intel_dp_m_n m_n;
 697         int pipe = intel_crtc->pipe;
 698
 699         /*
 700          * Find the lane count in the intel_encoder private
 701          */
 702         list_for_each_entry(encoder, &mode_config->encoder_list, head) {
 703                 struct intel_dp *intel_dp;
 704
 705                 if (encoder->crtc != crtc)
 706                         continue;
 707
 708                 intel_dp = enc_to_intel_dp(encoder);
 709                 if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT) {
 710                         lane_count = intel_dp->lane_count;
 711                         break;
 712                 } else if (is_edp(intel_dp)) {
 713                         lane_count = dev_priv->edp.lanes;
 714                         break;
 715                 }
 716         }
 717
 718         /*
 719          * Compute the GMCH and Link ratios. The '3' here is
 720          * the number of bytes_per_pixel post-LUT, which we always
 721          * set up for 8-bits of R/G/B, or 3 bytes total.
 722          */
 723         intel_dp_compute_m_n(intel_crtc->bpp, lane_count,
 724                              mode->clock, adjusted_mode->clock, &m_n);
 725
 726         if (HAS_PCH_SPLIT(dev)) {
 727                 I915_WRITE(TRANSDATA_M1(pipe),
 728                            ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) |
 729                            m_n.gmch_m);
 730                 I915_WRITE(TRANSDATA_N1(pipe), m_n.gmch_n);
 731                 I915_WRITE(TRANSDPLINK_M1(pipe), m_n.link_m);
 732                 I915_WRITE(TRANSDPLINK_N1(pipe), m_n.link_n);
 733         } else {
 734                 I915_WRITE(PIPE_GMCH_DATA_M(pipe),
 735                            ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) |
 736                            m_n.gmch_m);
 737                 I915_WRITE(PIPE_GMCH_DATA_N(pipe), m_n.gmch_n);
 738                 I915_WRITE(PIPE_DP_LINK_M(pipe), m_n.link_m);
 739                 I915_WRITE(PIPE_DP_LINK_N(pipe), m_n.link_n);
 740         }
 741 }
 742
 743 static void
 744 intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
 745                   struct drm_display_mode *adjusted_mode)
 746 {
 747         struct drm_device *dev = encoder->dev;
 748         struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
 749         struct drm_crtc *crtc = intel_dp->base.base.crtc;
 750         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 751
 752         intel_dp->DP = DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0;
 753         intel_dp->DP |= intel_dp->color_range;
 754
 755         if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
 756                 intel_dp->DP |= DP_SYNC_HS_HIGH;
 757         if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
 758                 intel_dp->DP |= DP_SYNC_VS_HIGH;
 759
 760         if (HAS_PCH_CPT(dev) && !is_edp(intel_dp))
 761                 intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT;
 762         else
 763                 intel_dp->DP |= DP_LINK_TRAIN_OFF;
 764
 765         switch (intel_dp->lane_count) {
 766         case 1:
 767                 intel_dp->DP |= DP_PORT_WIDTH_1;
 768                 break;
 769         case 2:
 770                 intel_dp->DP |= DP_PORT_WIDTH_2;
 771                 break;
 772         case 4:
 773                 intel_dp->DP |= DP_PORT_WIDTH_4;
 774                 break;
 775         }
 776         if (intel_dp->has_audio)
 777                 intel_dp->DP |= DP_AUDIO_OUTPUT_ENABLE;
 778
 779         memset(intel_dp->link_configuration, 0, DP_LINK_CONFIGURATION_SIZE);
 780         intel_dp->link_configuration[0] = intel_dp->link_bw;
 781         intel_dp->link_configuration[1] = intel_dp->lane_count;
 782         intel_dp->link_configuration[8] = DP_SET_ANSI_8B10B;
 783
 784         /*
 785          * Check for DPCD version > 1.1 and enhanced framing support
 786          */
 787         if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11 &&
 788             (intel_dp->dpcd[DP_MAX_LANE_COUNT] & DP_ENHANCED_FRAME_CAP)) {
 789                 intel_dp->link_configuration[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
 790                 intel_dp->DP |= DP_ENHANCED_FRAMING;
 791         }
 792
 793         /* CPT DP's pipe select is decided in TRANS_DP_CTL */
 794         if (intel_crtc->pipe == 1 && !HAS_PCH_CPT(dev))
 795                 intel_dp->DP |= DP_PIPEB_SELECT;
 796
 797         if (is_edp(intel_dp) && !is_pch_edp(intel_dp)) {
 798                 /* don't miss out required setting for eDP */
 799                 intel_dp->DP |= DP_PLL_ENABLE;
 800                 if (adjusted_mode->clock < 200000)
 801                         intel_dp->DP |= DP_PLL_FREQ_160MHZ;
 802                 else
 803                         intel_dp->DP |= DP_PLL_FREQ_270MHZ;
 804         }
 805 }
 806
 807 static void ironlake_edp_panel_vdd_on(struct intel_dp *intel_dp)
 808 {
 809         struct drm_device *dev = intel_dp->base.base.dev;
 810         struct drm_i915_private *dev_priv = dev->dev_private;
 811         u32 pp;
 812
 813         /*
 814          * If the panel wasn't on, make sure there's not a currently
 815          * active PP sequence before enabling AUX VDD.
 816          */
 817         if (!(I915_READ(PCH_PP_STATUS) & PP_ON))
 818                 msleep(dev_priv->panel_t3);
 819
 820         pp = I915_READ(PCH_PP_CONTROL);
 821         pp |= EDP_FORCE_VDD;
 822         I915_WRITE(PCH_PP_CONTROL, pp);
 823         POSTING_READ(PCH_PP_CONTROL);
 824 }
 825
 826 static void ironlake_edp_panel_vdd_off(struct intel_dp *intel_dp)
 827 {
 828         struct drm_device *dev = intel_dp->base.base.dev;
 829         struct drm_i915_private *dev_priv = dev->dev_private;
 830         u32 pp;
 831
 832         pp = I915_READ(PCH_PP_CONTROL);
 833         pp &= ~EDP_FORCE_VDD;
 834         I915_WRITE(PCH_PP_CONTROL, pp);
 835         POSTING_READ(PCH_PP_CONTROL);
 836
 837         /* Make sure sequencer is idle before allowing subsequent activity */
 838         msleep(dev_priv->panel_t12);
 839 }
 840
 841 /* Returns true if the panel was already on when called */
 842 static bool ironlake_edp_panel_on (struct intel_dp *intel_dp)
 843 {
 844         struct drm_device *dev = intel_dp->base.base.dev;
 845         struct drm_i915_private *dev_priv = dev->dev_private;
 846         u32 pp, idle_on_mask = PP_ON | PP_SEQUENCE_STATE_ON_IDLE;
 847
 848         if (I915_READ(PCH_PP_STATUS) & PP_ON)
 849                 return true;
 850
 851         pp = I915_READ(PCH_PP_CONTROL);
 852
 853         /* ILK workaround: disable reset around power sequence */
 854         pp &= ~PANEL_POWER_RESET;
 855         I915_WRITE(PCH_PP_CONTROL, pp);
 856         POSTING_READ(PCH_PP_CONTROL);
 857
 858         pp |= PANEL_UNLOCK_REGS | POWER_TARGET_ON;
 859         I915_WRITE(PCH_PP_CONTROL, pp);
 860         POSTING_READ(PCH_PP_CONTROL);
 861
 862         if (wait_for((I915_READ(PCH_PP_STATUS) & idle_on_mask) == idle_on_mask,
 863                      5000))
 864                 DRM_ERROR("panel on wait timed out: 0x%08x\n",
 865                           I915_READ(PCH_PP_STATUS));
 866
 867         pp |= PANEL_POWER_RESET; /* restore panel reset bit */
 868         I915_WRITE(PCH_PP_CONTROL, pp);
 869         POSTING_READ(PCH_PP_CONTROL);
 870
 871         return false;
 872 }
 873
 874 static void ironlake_edp_panel_off (struct drm_device *dev)
 875 {
 876         struct drm_i915_private *dev_priv = dev->dev_private;
 877         u32 pp, idle_off_mask = PP_ON | PP_SEQUENCE_MASK |
 878                 PP_CYCLE_DELAY_ACTIVE | PP_SEQUENCE_STATE_MASK;
 879
 880         pp = I915_READ(PCH_PP_CONTROL);
 881
 882         /* ILK workaround: disable reset around power sequence */
 883         pp &= ~PANEL_POWER_RESET;
 884         I915_WRITE(PCH_PP_CONTROL, pp);
 885         POSTING_READ(PCH_PP_CONTROL);
 886
 887         pp &= ~POWER_TARGET_ON;
 888         I915_WRITE(PCH_PP_CONTROL, pp);
 889         POSTING_READ(PCH_PP_CONTROL);
 890
 891         if (wait_for((I915_READ(PCH_PP_STATUS) & idle_off_mask) == 0, 5000))
 892                 DRM_ERROR("panel off wait timed out: 0x%08x\n",
 893                           I915_READ(PCH_PP_STATUS));
 894
 895         pp |= PANEL_POWER_RESET; /* restore panel reset bit */
 896         I915_WRITE(PCH_PP_CONTROL, pp);
 897         POSTING_READ(PCH_PP_CONTROL);
 898 }
 899
 900 static void ironlake_edp_backlight_on (struct drm_device *dev)
 901 {
 902         struct drm_i915_private *dev_priv = dev->dev_private;
 903         u32 pp;
 904
 905         DRM_DEBUG_KMS("\n");
 906         /*
 907          * If we enable the backlight right away following a panel power
 908          * on, we may see slight flicker as the panel syncs with the eDP
 909          * link.  So delay a bit to make sure the image is solid before
 910          * allowing it to appear.
 911          */
 912         msleep(300);
 913         pp = I915_READ(PCH_PP_CONTROL);
 914         pp |= EDP_BLC_ENABLE;
 915         I915_WRITE(PCH_PP_CONTROL, pp);
 916 }
 917
 918 static void ironlake_edp_backlight_off (struct drm_device *dev)
 919 {
 920         struct drm_i915_private *dev_priv = dev->dev_private;
 921         u32 pp;
 922
 923         DRM_DEBUG_KMS("\n");
 924         pp = I915_READ(PCH_PP_CONTROL);
 925         pp &= ~EDP_BLC_ENABLE;
 926         I915_WRITE(PCH_PP_CONTROL, pp);
 927 }
 928
 929 static void ironlake_edp_pll_on(struct drm_encoder *encoder)
 930 {
 931         struct drm_device *dev = encoder->dev;
 932         struct drm_i915_private *dev_priv = dev->dev_private;
 933         u32 dpa_ctl;
 934
 935         DRM_DEBUG_KMS("\n");
 936         dpa_ctl = I915_READ(DP_A);
 937         dpa_ctl |= DP_PLL_ENABLE;
 938         I915_WRITE(DP_A, dpa_ctl);
 939         POSTING_READ(DP_A);
 940         udelay(200);
 941 }
 942
 943 static void ironlake_edp_pll_off(struct drm_encoder *encoder)
 944 {
 945         struct drm_device *dev = encoder->dev;
 946         struct drm_i915_private *dev_priv = dev->dev_private;
 947         u32 dpa_ctl;
 948
 949         dpa_ctl = I915_READ(DP_A);
 950         dpa_ctl &= ~DP_PLL_ENABLE;
 951         I915_WRITE(DP_A, dpa_ctl);
 952         POSTING_READ(DP_A);
 953         udelay(200);
 954 }
 955
 956 /* If the sink supports it, try to set the power state appropriately */
 957 static void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode)
 958 {
 959         int ret, i;
 960
 961         /* Should have a valid DPCD by this point */
 962         if (intel_dp->dpcd[DP_DPCD_REV] < 0x11)
 963                 return;
 964
 965         if (mode != DRM_MODE_DPMS_ON) {
 966                 ret = intel_dp_aux_native_write_1(intel_dp, DP_SET_POWER,
 967                                                   DP_SET_POWER_D3);
 968                 if (ret != 1)
 969                         DRM_DEBUG_DRIVER("failed to write sink power state\n");
 970         } else {
 971                 /*
 972                  * When turning on, we need to retry for 1ms to give the sink
 973                  * time to wake up.
 974                  */
 975                 for (i = 0; i < 3; i++) {
 976                         ret = intel_dp_aux_native_write_1(intel_dp,
 977                                                           DP_SET_POWER,
 978                                                           DP_SET_POWER_D0);
 979                         if (ret == 1)
 980                                 break;
 981                         msleep(1);
 982                 }
 983         }
 984 }
 985
 986 static void intel_dp_prepare(struct drm_encoder *encoder)
 987 {
 988         struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
 989         struct drm_device *dev = encoder->dev;
 990
 991         /* Wake up the sink first */
 992         intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON);
 993
 994         if (is_edp(intel_dp)) {
 995                 ironlake_edp_backlight_off(dev);
 996                 ironlake_edp_panel_off(dev);
 997                 if (!is_pch_edp(intel_dp))
 998                         ironlake_edp_pll_on(encoder);
 999                 else
1000                         ironlake_edp_pll_off(encoder);
1001         }
1002         intel_dp_link_down(intel_dp);
1003 }
1004
1005 static void intel_dp_commit(struct drm_encoder *encoder)
1006 {
1007         struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
1008         struct drm_device *dev = encoder->dev;
1009
1010         if (is_edp(intel_dp))
1011                 ironlake_edp_panel_vdd_on(intel_dp);
1012
1013         intel_dp_start_link_train(intel_dp);
1014
1015         if (is_edp(intel_dp)) {
1016                 ironlake_edp_panel_on(intel_dp);
1017                 ironlake_edp_panel_vdd_off(intel_dp);
1018         }
1019
1020         intel_dp_complete_link_train(intel_dp);
1021
1022         if (is_edp(intel_dp))
1023                 ironlake_edp_backlight_on(dev);
1024
1025         intel_dp->dpms_mode = DRM_MODE_DPMS_ON;
1026 }
1027
1028 static void
1029 intel_dp_dpms(struct drm_encoder *encoder, int mode)
1030 {
1031         struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
1032         struct drm_device *dev = encoder->dev;
1033         struct drm_i915_private *dev_priv = dev->dev_private;
1034         uint32_t dp_reg = I915_READ(intel_dp->output_reg);
1035
1036         if (mode != DRM_MODE_DPMS_ON) {
1037                 if (is_edp(intel_dp))
1038                         ironlake_edp_backlight_off(dev);
1039                 intel_dp_sink_dpms(intel_dp, mode);
1040                 intel_dp_link_down(intel_dp);
1041                 if (is_edp(intel_dp))
1042                         ironlake_edp_panel_off(dev);
1043                 if (is_edp(intel_dp) && !is_pch_edp(intel_dp))
1044                         ironlake_edp_pll_off(encoder);
1045         } else {
1046                 if (is_edp(intel_dp))
1047                         ironlake_edp_panel_vdd_on(intel_dp);
1048                 intel_dp_sink_dpms(intel_dp, mode);
1049                 if (!(dp_reg & DP_PORT_EN)) {
1050                         intel_dp_start_link_train(intel_dp);
1051                         if (is_edp(intel_dp)) {
1052                                 ironlake_edp_panel_on(intel_dp);
1053                                 ironlake_edp_panel_vdd_off(intel_dp);
1054                         }
1055                         intel_dp_complete_link_train(intel_dp);
1056                 }
1057                 if (is_edp(intel_dp))
1058                         ironlake_edp_backlight_on(dev);
1059         }
1060         intel_dp->dpms_mode = mode;
1061 }
1062
1063 /*
1064  * Native read with retry for link status and receiver capability reads for
1065  * cases where the sink may still be asleep.
1066  */
1067 static bool
1068 intel_dp_aux_native_read_retry(struct intel_dp *intel_dp, uint16_t address,
1069                                uint8_t *recv, int recv_bytes)
1070 {
1071         int ret, i;
1072
1073         /*
1074          * Sinks are *supposed* to come up within 1ms from an off state,
1075          * but we're also supposed to retry 3 times per the spec.
1076          */
1077         for (i = 0; i < 3; i++) {
1078                 ret = intel_dp_aux_native_read(intel_dp, address, recv,
1079                                                recv_bytes);
1080                 if (ret == recv_bytes)
1081                         return true;
1082                 msleep(1);
1083         }
1084
1085         return false;
1086 }
1087
1088 /*
1089  * Fetch AUX CH registers 0x202 - 0x207 which contain
1090  * link status information
1091  */
1092 static bool
1093 intel_dp_get_link_status(struct intel_dp *intel_dp)
1094 {
1095         return intel_dp_aux_native_read_retry(intel_dp,
1096                                               DP_LANE0_1_STATUS,
1097                                               intel_dp->link_status,
1098                                               DP_LINK_STATUS_SIZE);
1099 }
1100
1101 static uint8_t
1102 intel_dp_link_status(uint8_t link_status[DP_LINK_STATUS_SIZE],
1103                      int r)
1104 {
1105         return link_status[r - DP_LANE0_1_STATUS];
1106 }
1107
1108 static uint8_t
1109 intel_get_adjust_request_voltage(uint8_t link_status[DP_LINK_STATUS_SIZE],
1110                                  int lane)
1111 {
1112         int         i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1);
1113         int         s = ((lane & 1) ?
1114                          DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT :
1115                          DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT);
1116         uint8_t l = intel_dp_link_status(link_status, i);
1117
1118         return ((l >> s) & 3) << DP_TRAIN_VOLTAGE_SWING_SHIFT;
1119 }
1120
1121 static uint8_t
1122 intel_get_adjust_request_pre_emphasis(uint8_t link_status[DP_LINK_STATUS_SIZE],
1123                                       int lane)
1124 {
1125         int         i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1);
1126         int         s = ((lane & 1) ?
1127                          DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT :
1128                          DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT);
1129         uint8_t l = intel_dp_link_status(link_status, i);
1130
1131         return ((l >> s) & 3) << DP_TRAIN_PRE_EMPHASIS_SHIFT;
1132 }
1133
1134
1135 #if 0
1136 static char     *voltage_names[] = {
1137         "0.4V", "0.6V", "0.8V", "1.2V"
1138 };
1139 static char     *pre_emph_names[] = {
1140         "0dB", "3.5dB", "6dB", "9.5dB"
1141 };
1142 static char     *link_train_names[] = {
1143         "pattern 1", "pattern 2", "idle", "off"
1144 };
1145 #endif
1146
1147 /*
1148  * These are source-specific values; current Intel hardware supports
1149  * a maximum voltage of 800mV and a maximum pre-emphasis of 6dB
1150  */
1151 #define I830_DP_VOLTAGE_MAX         DP_TRAIN_VOLTAGE_SWING_800
1152
1153 static uint8_t
1154 intel_dp_pre_emphasis_max(uint8_t voltage_swing)
1155 {
1156         switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) {
1157         case DP_TRAIN_VOLTAGE_SWING_400:
1158                 return DP_TRAIN_PRE_EMPHASIS_6;
1159         case DP_TRAIN_VOLTAGE_SWING_600:
1160                 return DP_TRAIN_PRE_EMPHASIS_6;
1161         case DP_TRAIN_VOLTAGE_SWING_800:
1162                 return DP_TRAIN_PRE_EMPHASIS_3_5;
1163         case DP_TRAIN_VOLTAGE_SWING_1200:
1164         default:
1165                 return DP_TRAIN_PRE_EMPHASIS_0;
1166         }
1167 }
1168
1169 static void
1170 intel_get_adjust_train(struct intel_dp *intel_dp)
1171 {
1172         uint8_t v = 0;
1173         uint8_t p = 0;
1174         int lane;
1175
1176         for (lane = 0; lane < intel_dp->lane_count; lane++) {
1177                 uint8_t this_v = intel_get_adjust_request_voltage(intel_dp->link_status, lane);
1178                 uint8_t this_p = intel_get_adjust_request_pre_emphasis(intel_dp->link_status, lane);
1179
1180                 if (this_v > v)
1181                         v = this_v;
1182                 if (this_p > p)
1183                         p = this_p;
1184         }
1185
1186         if (v >= I830_DP_VOLTAGE_MAX)
1187                 v = I830_DP_VOLTAGE_MAX | DP_TRAIN_MAX_SWING_REACHED;
1188
1189         if (p >= intel_dp_pre_emphasis_max(v))
1190                 p = intel_dp_pre_emphasis_max(v) | DP_TRAIN_MAX_PRE_EMPHASIS_REACHED;
1191
1192         for (lane = 0; lane < 4; lane++)
1193                 intel_dp->train_set[lane] = v | p;
1194 }
1195
1196 static uint32_t
1197 intel_dp_signal_levels(uint8_t train_set, int lane_count)
1198 {
1199         uint32_t        signal_levels = 0;
1200
1201         switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) {
1202         case DP_TRAIN_VOLTAGE_SWING_400:
1203         default:
1204                 signal_levels |= DP_VOLTAGE_0_4;
1205                 break;
1206         case DP_TRAIN_VOLTAGE_SWING_600:
1207                 signal_levels |= DP_VOLTAGE_0_6;
1208                 break;
1209         case DP_TRAIN_VOLTAGE_SWING_800:
1210                 signal_levels |= DP_VOLTAGE_0_8;
1211                 break;
1212         case DP_TRAIN_VOLTAGE_SWING_1200:
1213                 signal_levels |= DP_VOLTAGE_1_2;
1214                 break;
1215         }
1216         switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) {
1217         case DP_TRAIN_PRE_EMPHASIS_0:
1218         default:
1219                 signal_levels |= DP_PRE_EMPHASIS_0;
1220                 break;
1221         case DP_TRAIN_PRE_EMPHASIS_3_5:
1222                 signal_levels |= DP_PRE_EMPHASIS_3_5;
1223                 break;
1224         case DP_TRAIN_PRE_EMPHASIS_6:
1225                 signal_levels |= DP_PRE_EMPHASIS_6;
1226                 break;
1227         case DP_TRAIN_PRE_EMPHASIS_9_5:
1228                 signal_levels |= DP_PRE_EMPHASIS_9_5;
1229                 break;
1230         }
1231         return signal_levels;
1232 }
1233
1234 /* Gen6's DP voltage swing and pre-emphasis control */
1235 static uint32_t
1236 intel_gen6_edp_signal_levels(uint8_t train_set)
1237 {
1238         int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK |
1239                                          DP_TRAIN_PRE_EMPHASIS_MASK);
1240         switch (signal_levels) {
1241         case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_0:
1242         case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_0:
1243                 return EDP_LINK_TRAIN_400_600MV_0DB_SNB_B;
1244         case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_3_5:
1245                 return EDP_LINK_TRAIN_400MV_3_5DB_SNB_B;
1246         case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_6:
1247         case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_6:
1248                 return EDP_LINK_TRAIN_400_600MV_6DB_SNB_B;
1249         case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_3_5:
1250         case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_3_5:
1251                 return EDP_LINK_TRAIN_600_800MV_3_5DB_SNB_B;
1252         case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_0:
1253         case DP_TRAIN_VOLTAGE_SWING_1200 | DP_TRAIN_PRE_EMPHASIS_0:
1254                 return EDP_LINK_TRAIN_800_1200MV_0DB_SNB_B;
1255         default:
1256                 DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level:"
1257                               "0x%x\n", signal_levels);
1258                 return EDP_LINK_TRAIN_400_600MV_0DB_SNB_B;
1259         }
1260 }
1261
1262 static uint8_t
1263 intel_get_lane_status(uint8_t link_status[DP_LINK_STATUS_SIZE],
1264                       int lane)
1265 {
1266         int i = DP_LANE0_1_STATUS + (lane >> 1);
1267         int s = (lane & 1) * 4;
1268         uint8_t l = intel_dp_link_status(link_status, i);
1269
1270         return (l >> s) & 0xf;
1271 }
1272
1273 /* Check for clock recovery is done on all channels */
1274 static bool
1275 intel_clock_recovery_ok(uint8_t link_status[DP_LINK_STATUS_SIZE], int lane_count)
1276 {
1277         int lane;
1278         uint8_t lane_status;
1279
1280         for (lane = 0; lane < lane_count; lane++) {
1281                 lane_status = intel_get_lane_status(link_status, lane);
1282                 if ((lane_status & DP_LANE_CR_DONE) == 0)
1283                         return false;
1284         }
1285         return true;
1286 }
1287
1288 /* Check to see if channel eq is done on all channels */
1289 #define CHANNEL_EQ_BITS (DP_LANE_CR_DONE|\
1290                          DP_LANE_CHANNEL_EQ_DONE|\
1291                          DP_LANE_SYMBOL_LOCKED)
1292 static bool
1293 intel_channel_eq_ok(struct intel_dp *intel_dp)
1294 {
1295         uint8_t lane_align;
1296         uint8_t lane_status;
1297         int lane;
1298
1299         lane_align = intel_dp_link_status(intel_dp->link_status,
1300                                           DP_LANE_ALIGN_STATUS_UPDATED);
1301         if ((lane_align & DP_INTERLANE_ALIGN_DONE) == 0)
1302                 return false;
1303         for (lane = 0; lane < intel_dp->lane_count; lane++) {
1304                 lane_status = intel_get_lane_status(intel_dp->link_status, lane);
1305                 if ((lane_status & CHANNEL_EQ_BITS) != CHANNEL_EQ_BITS)
1306                         return false;
1307         }
1308         return true;
1309 }
1310
1311 static bool
1312 intel_dp_set_link_train(struct intel_dp *intel_dp,
1313                         uint32_t dp_reg_value,
1314                         uint8_t dp_train_pat)
1315 {
1316         struct drm_device *dev = intel_dp->base.base.dev;
1317         struct drm_i915_private *dev_priv = dev->dev_private;
1318         int ret;
1319
1320         I915_WRITE(intel_dp->output_reg, dp_reg_value);
1321         POSTING_READ(intel_dp->output_reg);
1322
1323         intel_dp_aux_native_write_1(intel_dp,
1324                                     DP_TRAINING_PATTERN_SET,
1325                                     dp_train_pat);
1326
1327         ret = intel_dp_aux_native_write(intel_dp,
1328                                         DP_TRAINING_LANE0_SET,
1329                                         intel_dp->train_set, 4);
1330         if (ret != 4)
1331                 return false;
1332
1333         return true;
1334 }
1335
1336 /* Enable corresponding port and start training pattern 1 */
1337 static void
1338 intel_dp_start_link_train(struct intel_dp *intel_dp)
1339 {
1340         struct drm_device *dev = intel_dp->base.base.dev;
1341         struct drm_i915_private *dev_priv = dev->dev_private;
1342         struct intel_crtc *intel_crtc = to_intel_crtc(intel_dp->base.base.crtc);
1343         int i;
1344         uint8_t voltage;
1345         bool clock_recovery = false;
1346         int tries;
1347         u32 reg;
1348         uint32_t DP = intel_dp->DP;
1349
1350         /*
1351          * On CPT we have to enable the port in training pattern 1, which
1352          * will happen below in intel_dp_set_link_train.  Otherwise, enable
1353          * the port and wait for it to become active.
1354          */
1355         if (!HAS_PCH_CPT(dev)) {
1356                 I915_WRITE(intel_dp->output_reg, intel_dp->DP);
1357                 POSTING_READ(intel_dp->output_reg);
1358                 intel_wait_for_vblank(dev, intel_crtc->pipe);
1359         }
1360
1361         /* Write the link configuration data */
1362         intel_dp_aux_native_write(intel_dp, DP_LINK_BW_SET,
1363                                   intel_dp->link_configuration,
1364                                   DP_LINK_CONFIGURATION_SIZE);
1365
1366         DP |= DP_PORT_EN;
1367         if (HAS_PCH_CPT(dev) && !is_edp(intel_dp))
1368                 DP &= ~DP_LINK_TRAIN_MASK_CPT;
1369         else
1370                 DP &= ~DP_LINK_TRAIN_MASK;
1371         memset(intel_dp->train_set, 0, 4);
1372         voltage = 0xff;
1373         tries = 0;
1374         clock_recovery = false;
1375         for (;;) {
1376                 /* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */
1377                 uint32_t    signal_levels;
1378                 if (IS_GEN6(dev) && is_edp(intel_dp)) {
1379                         signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]);
1380                         DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels;
1381                 } else {
1382                         signal_levels = intel_dp_signal_levels(intel_dp->train_set[0], intel_dp->lane_count);
1383                         DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
1384                 }
1385
1386                 if (HAS_PCH_CPT(dev) && !is_edp(intel_dp))
1387                         reg = DP | DP_LINK_TRAIN_PAT_1_CPT;
1388                 else
1389                         reg = DP | DP_LINK_TRAIN_PAT_1;
1390
1391                 if (!intel_dp_set_link_train(intel_dp, reg,
1392                                              DP_TRAINING_PATTERN_1 |
1393                                              DP_LINK_SCRAMBLING_DISABLE))
1394                         break;
1395                 /* Set training pattern 1 */
1396
1397                 udelay(100);
1398                 if (!intel_dp_get_link_status(intel_dp))
1399                         break;
1400
1401                 if (intel_clock_recovery_ok(intel_dp->link_status, intel_dp->lane_count)) {
1402                         clock_recovery = true;
1403                         break;
1404                 }
1405
1406                 /* Check to see if we've tried the max voltage */
1407                 for (i = 0; i < intel_dp->lane_count; i++)
1408                         if ((intel_dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0)
1409                                 break;
1410                 if (i == intel_dp->lane_count)
1411                         break;
1412
1413                 /* Check to see if we've tried the same voltage 5 times */
1414                 if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) {
1415                         ++tries;
1416                         if (tries == 5)
1417                                 break;
1418                 } else
1419                         tries = 0;
1420                 voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK;
1421
1422                 /* Compute new intel_dp->train_set as requested by target */
1423                 intel_get_adjust_train(intel_dp);
1424         }
1425
1426         intel_dp->DP = DP;
1427 }
1428
1429 static void
1430 intel_dp_complete_link_train(struct intel_dp *intel_dp)
1431 {
1432         struct drm_device *dev = intel_dp->base.base.dev;
1433         struct drm_i915_private *dev_priv = dev->dev_private;
1434         bool channel_eq = false;
1435         int tries, cr_tries;
1436         u32 reg;
1437         uint32_t DP = intel_dp->DP;
1438
1439         /* channel equalization */
1440         tries = 0;
1441         cr_tries = 0;
1442         channel_eq = false;
1443         for (;;) {
1444                 /* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */
1445                 uint32_t    signal_levels;
1446
1447                 if (cr_tries > 5) {
1448                         DRM_ERROR("failed to train DP, aborting\n");
1449                         intel_dp_link_down(intel_dp);
1450                         break;
1451                 }
1452
1453                 if (IS_GEN6(dev) && is_edp(intel_dp)) {
1454                         signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]);
1455                         DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels;
1456                 } else {
1457                         signal_levels = intel_dp_signal_levels(intel_dp->train_set[0], intel_dp->lane_count);
1458                         DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
1459                 }
1460
1461                 if (HAS_PCH_CPT(dev) && !is_edp(intel_dp))
1462                         reg = DP | DP_LINK_TRAIN_PAT_2_CPT;
1463                 else
1464                         reg = DP | DP_LINK_TRAIN_PAT_2;
1465
1466                 /* channel eq pattern */
1467                 if (!intel_dp_set_link_train(intel_dp, reg,
1468                                              DP_TRAINING_PATTERN_2 |
1469                                              DP_LINK_SCRAMBLING_DISABLE))
1470                         break;
1471
1472                 udelay(400);
1473                 if (!intel_dp_get_link_status(intel_dp))
1474                         break;
1475
1476                 /* Make sure clock is still ok */
1477                 if (!intel_clock_recovery_ok(intel_dp->link_status, intel_dp->lane_count)) {
1478                         intel_dp_start_link_train(intel_dp);
1479                         cr_tries++;
1480                         continue;
1481                 }
1482
1483                 if (intel_channel_eq_ok(intel_dp)) {
1484                         channel_eq = true;
1485                         break;
1486                 }
1487
1488                 /* Try 5 times, then try clock recovery if that fails */
1489                 if (tries > 5) {
1490                         intel_dp_link_down(intel_dp);
1491                         intel_dp_start_link_train(intel_dp);
1492                         tries = 0;
1493                         cr_tries++;
1494                         continue;
1495                 }
1496
1497                 /* Compute new intel_dp->train_set as requested by target */
1498                 intel_get_adjust_train(intel_dp);
1499                 ++tries;
1500         }
1501
1502         if (HAS_PCH_CPT(dev) && !is_edp(intel_dp))
1503                 reg = DP | DP_LINK_TRAIN_OFF_CPT;
1504         else
1505                 reg = DP | DP_LINK_TRAIN_OFF;
1506
1507         I915_WRITE(intel_dp->output_reg, reg);
1508         POSTING_READ(intel_dp->output_reg);
1509         intel_dp_aux_native_write_1(intel_dp,
1510                                     DP_TRAINING_PATTERN_SET, DP_TRAINING_PATTERN_DISABLE);
1511 }
1512
1513 static void
1514 intel_dp_link_down(struct intel_dp *intel_dp)
1515 {
1516         struct drm_device *dev = intel_dp->base.base.dev;
1517         struct drm_i915_private *dev_priv = dev->dev_private;
1518         uint32_t DP = intel_dp->DP;
1519
1520         if ((I915_READ(intel_dp->output_reg) & DP_PORT_EN) == 0)
1521                 return;
1522
1523         DRM_DEBUG_KMS("\n");
1524
1525         if (is_edp(intel_dp)) {
1526                 DP &= ~DP_PLL_ENABLE;
1527                 I915_WRITE(intel_dp->output_reg, DP);
1528                 POSTING_READ(intel_dp->output_reg);
1529                 udelay(100);
1530         }
1531
1532         if (HAS_PCH_CPT(dev) && !is_edp(intel_dp)) {
1533                 DP &= ~DP_LINK_TRAIN_MASK_CPT;
1534                 I915_WRITE(intel_dp->output_reg, DP | DP_LINK_TRAIN_PAT_IDLE_CPT);
1535         } else {
1536                 DP &= ~DP_LINK_TRAIN_MASK;
1537                 I915_WRITE(intel_dp->output_reg, DP | DP_LINK_TRAIN_PAT_IDLE);
1538         }
1539         POSTING_READ(intel_dp->output_reg);
1540
1541         msleep(17);
1542
1543         if (is_edp(intel_dp))
1544                 DP |= DP_LINK_TRAIN_OFF;
1545
1546         if (!HAS_PCH_CPT(dev) &&
1547             I915_READ(intel_dp->output_reg) & DP_PIPEB_SELECT) {
1548                 struct drm_crtc *crtc = intel_dp->base.base.crtc;
1549
1550                 /* Hardware workaround: leaving our transcoder select
1551                  * set to transcoder B while it's off will prevent the
1552                  * corresponding HDMI output on transcoder A.
1553                  *
1554                  * Combine this with another hardware workaround:
1555                  * transcoder select bit can only be cleared while the
1556                  * port is enabled.
1557                  */
1558                 DP &= ~DP_PIPEB_SELECT;
1559                 I915_WRITE(intel_dp->output_reg, DP);
1560
1561                 /* Changes to enable or select take place the vblank
1562                  * after being written.
1563                  */
1564                 if (crtc == NULL) {
1565                         /* We can arrive here never having been attached
1566                          * to a CRTC, for instance, due to inheriting
1567                          * random state from the BIOS.
1568                          *
1569                          * If the pipe is not running, play safe and
1570                          * wait for the clocks to stabilise before
1571                          * continuing.
1572                          */
1573                         POSTING_READ(intel_dp->output_reg);
1574                         msleep(50);
1575                 } else
1576                         intel_wait_for_vblank(dev, to_intel_crtc(crtc)->pipe);
1577         }
1578
1579         I915_WRITE(intel_dp->output_reg, DP & ~DP_PORT_EN);
1580         POSTING_READ(intel_dp->output_reg);
1581 }
1582
1583 static bool
1584 intel_dp_get_dpcd(struct intel_dp *intel_dp)
1585 {
1586         if (intel_dp_aux_native_read_retry(intel_dp, 0x000, intel_dp->dpcd,
1587                                            sizeof (intel_dp->dpcd)) &&
1588             (intel_dp->dpcd[DP_DPCD_REV] != 0)) {
1589                 return true;
1590         }
1591
1592         return false;
1593 }
1594
1595 /*
1596  * According to DP spec
1597  * 5.1.2:
1598  *  1. Read DPCD
1599  *  2. Configure link according to Receiver Capabilities
1600  *  3. Use Link Training from 2.5.3.3 and 3.5.1.3
1601  *  4. Check link status on receipt of hot-plug interrupt
1602  */
1603
1604 static void
1605 intel_dp_check_link_status(struct intel_dp *intel_dp)
1606 {
1607         if (intel_dp->dpms_mode != DRM_MODE_DPMS_ON)
1608                 return;
1609
1610         if (!intel_dp->base.base.crtc)
1611                 return;
1612
1613         /* Try to read receiver status if the link appears to be up */
1614         if (!intel_dp_get_link_status(intel_dp)) {
1615                 intel_dp_link_down(intel_dp);
1616                 return;
1617         }
1618
1619         /* Now read the DPCD to see if it's actually running */
1620         if (!intel_dp_get_dpcd(intel_dp)) {
1621                 intel_dp_link_down(intel_dp);
1622                 return;
1623         }
1624
1625         if (!intel_channel_eq_ok(intel_dp)) {
1626                 DRM_DEBUG_KMS("%s: channel EQ not ok, retraining\n",
1627                               drm_get_encoder_name(&intel_dp->base.base));
1628                 intel_dp_start_link_train(intel_dp);
1629                 intel_dp_complete_link_train(intel_dp);
1630         }
1631 }
1632
1633 static enum drm_connector_status
1634 intel_dp_detect_dpcd(struct intel_dp *intel_dp)
1635 {
1636         if (intel_dp_get_dpcd(intel_dp))
1637                 return connector_status_connected;
1638         return connector_status_disconnected;
1639 }
1640
1641 static enum drm_connector_status
1642 ironlake_dp_detect(struct intel_dp *intel_dp)
1643 {
1644         enum drm_connector_status status;
1645
1646         /* Can't disconnect eDP, but you can close the lid... */
1647         if (is_edp(intel_dp)) {
1648                 status = intel_panel_detect(intel_dp->base.base.dev);
1649                 if (status == connector_status_unknown)
1650                         status = connector_status_connected;
1651                 return status;
1652         }
1653
1654         return intel_dp_detect_dpcd(intel_dp);
1655 }
1656
1657 static enum drm_connector_status
1658 g4x_dp_detect(struct intel_dp *intel_dp)
1659 {
1660         struct drm_device *dev = intel_dp->base.base.dev;
1661         struct drm_i915_private *dev_priv = dev->dev_private;
1662         uint32_t temp, bit;
1663
1664         switch (intel_dp->output_reg) {
1665         case DP_B:
1666                 bit = DPB_HOTPLUG_INT_STATUS;
1667                 break;
1668         case DP_C:
1669                 bit = DPC_HOTPLUG_INT_STATUS;
1670                 break;
1671         case DP_D:
1672                 bit = DPD_HOTPLUG_INT_STATUS;
1673                 break;
1674         default:
1675                 return connector_status_unknown;
1676         }
1677
1678         temp = I915_READ(PORT_HOTPLUG_STAT);
1679
1680         if ((temp & bit) == 0)
1681                 return connector_status_disconnected;
1682
1683         return intel_dp_detect_dpcd(intel_dp);
1684 }
1685
1686 /**
1687  * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect DP connection.
1688  *
1689  * \return true if DP port is connected.
1690  * \return false if DP port is disconnected.
1691  */
1692 static enum drm_connector_status
1693 intel_dp_detect(struct drm_connector *connector, bool force)
1694 {
1695         struct intel_dp *intel_dp = intel_attached_dp(connector);
1696         struct drm_device *dev = intel_dp->base.base.dev;
1697         enum drm_connector_status status;
1698         struct edid *edid = NULL;
1699
1700         intel_dp->has_audio = false;
1701
1702         if (HAS_PCH_SPLIT(dev))
1703                 status = ironlake_dp_detect(intel_dp);
1704         else
1705                 status = g4x_dp_detect(intel_dp);
1706
1707         DRM_DEBUG_KMS("DPCD: %02hx%02hx%02hx%02hx%02hx%02hx%02hx%02hx\n",
1708                       intel_dp->dpcd[0], intel_dp->dpcd[1], intel_dp->dpcd[2],
1709                       intel_dp->dpcd[3], intel_dp->dpcd[4], intel_dp->dpcd[5],
1710                       intel_dp->dpcd[6], intel_dp->dpcd[7]);
1711
1712         if (status != connector_status_connected)
1713                 return status;
1714
1715         if (intel_dp->force_audio) {
1716                 intel_dp->has_audio = intel_dp->force_audio > 0;
1717         } else {
1718                 edid = drm_get_edid(connector, &intel_dp->adapter);
1719                 if (edid) {
1720                         intel_dp->has_audio = drm_detect_monitor_audio(edid);
1721                         connector->display_info.raw_edid = NULL;
1722                         kfree(edid);
1723                 }
1724         }
1725
1726         return connector_status_connected;
1727 }
1728
1729 static int intel_dp_get_modes(struct drm_connector *connector)
1730 {
1731         struct intel_dp *intel_dp = intel_attached_dp(connector);
1732         struct drm_device *dev = intel_dp->base.base.dev;
1733         struct drm_i915_private *dev_priv = dev->dev_private;
1734         int ret;
1735
1736         /* We should parse the EDID data and find out if it has an audio sink
1737          */
1738
1739         ret = intel_ddc_get_modes(connector, &intel_dp->adapter);
1740         if (ret) {
1741                 if (is_edp(intel_dp) && !dev_priv->panel_fixed_mode) {
1742                         struct drm_display_mode *newmode;
1743                         list_for_each_entry(newmode, &connector->probed_modes,
1744                                             head) {
1745                                 if (newmode->type & DRM_MODE_TYPE_PREFERRED) {
1746                                         dev_priv->panel_fixed_mode =
1747                                                 drm_mode_duplicate(dev, newmode);
1748                                         break;
1749                                 }
1750                         }
1751                 }
1752
1753                 return ret;
1754         }
1755
1756         /* if eDP has no EDID, try to use fixed panel mode from VBT */
1757         if (is_edp(intel_dp)) {
1758                 if (dev_priv->panel_fixed_mode != NULL) {
1759                         struct drm_display_mode *mode;
1760                         mode = drm_mode_duplicate(dev, dev_priv->panel_fixed_mode);
1761                         drm_mode_probed_add(connector, mode);
1762                         return 1;
1763                 }
1764         }
1765         return 0;
1766 }
1767
1768 static bool
1769 intel_dp_detect_audio(struct drm_connector *connector)
1770 {
1771         struct intel_dp *intel_dp = intel_attached_dp(connector);
1772         struct edid *edid;
1773         bool has_audio = false;
1774
1775         edid = drm_get_edid(connector, &intel_dp->adapter);
1776         if (edid) {
1777                 has_audio = drm_detect_monitor_audio(edid);
1778
1779                 connector->display_info.raw_edid = NULL;
1780                 kfree(edid);
1781         }
1782
1783         return has_audio;
1784 }
1785
1786 static int
1787 intel_dp_set_property(struct drm_connector *connector,
1788                       struct drm_property *property,
1789                       uint64_t val)
1790 {
1791         struct drm_i915_private *dev_priv = connector->dev->dev_private;
1792         struct intel_dp *intel_dp = intel_attached_dp(connector);
1793         int ret;
1794
1795         ret = drm_connector_property_set_value(connector, property, val);
1796         if (ret)
1797                 return ret;
1798
1799         if (property == dev_priv->force_audio_property) {
1800                 int i = val;
1801                 bool has_audio;
1802
1803                 if (i == intel_dp->force_audio)
1804                         return 0;
1805
1806                 intel_dp->force_audio = i;
1807
1808                 if (i == 0)
1809                         has_audio = intel_dp_detect_audio(connector);
1810                 else
1811                         has_audio = i > 0;
1812
1813                 if (has_audio == intel_dp->has_audio)
1814                         return 0;
1815
1816                 intel_dp->has_audio = has_audio;
1817                 goto done;
1818         }
1819
1820         if (property == dev_priv->broadcast_rgb_property) {
1821                 if (val == !!intel_dp->color_range)
1822                         return 0;
1823
1824                 intel_dp->color_range = val ? DP_COLOR_RANGE_16_235 : 0;
1825                 goto done;
1826         }
1827
1828         return -EINVAL;
1829
1830 done:
1831         if (intel_dp->base.base.crtc) {
1832                 struct drm_crtc *crtc = intel_dp->base.base.crtc;
1833                 drm_crtc_helper_set_mode(crtc, &crtc->mode,
1834                                          crtc->x, crtc->y,
1835                                          crtc->fb);
1836         }
1837
1838         return 0;
1839 }
1840
1841 static void
1842 intel_dp_destroy (struct drm_connector *connector)
1843 {
1844         struct drm_device *dev = connector->dev;
1845
1846         if (intel_dpd_is_edp(dev))
1847                 intel_panel_destroy_backlight(dev);
1848
1849         drm_sysfs_connector_remove(connector);
1850         drm_connector_cleanup(connector);
1851         kfree(connector);
1852 }
1853
1854 static void intel_dp_encoder_destroy(struct drm_encoder *encoder)
1855 {
1856         struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
1857
1858         i2c_del_adapter(&intel_dp->adapter);
1859         drm_encoder_cleanup(encoder);
1860         kfree(intel_dp);
1861 }
1862
1863 static const struct drm_encoder_helper_funcs intel_dp_helper_funcs = {
1864         .dpms = intel_dp_dpms,
1865         .mode_fixup = intel_dp_mode_fixup,
1866         .prepare = intel_dp_prepare,
1867         .mode_set = intel_dp_mode_set,
1868         .commit = intel_dp_commit,
1869 };
1870
1871 static const struct drm_connector_funcs intel_dp_connector_funcs = {
1872         .dpms = drm_helper_connector_dpms,
1873         .detect = intel_dp_detect,
1874         .fill_modes = drm_helper_probe_single_connector_modes,
1875         .set_property = intel_dp_set_property,
1876         .destroy = intel_dp_destroy,
1877 };
1878
1879 static const struct drm_connector_helper_funcs intel_dp_connector_helper_funcs = {
1880         .get_modes = intel_dp_get_modes,
1881         .mode_valid = intel_dp_mode_valid,
1882         .best_encoder = intel_best_encoder,
1883 };
1884
1885 static const struct drm_encoder_funcs intel_dp_enc_funcs = {
1886         .destroy = intel_dp_encoder_destroy,
1887 };
1888
1889 static void
1890 intel_dp_hot_plug(struct intel_encoder *intel_encoder)
1891 {
1892         struct intel_dp *intel_dp = container_of(intel_encoder, struct intel_dp, base);
1893
1894         intel_dp_check_link_status(intel_dp);
1895 }
1896
1897 /* Return which DP Port should be selected for Transcoder DP control */
1898 int
1899 intel_trans_dp_port_sel (struct drm_crtc *crtc)
1900 {
1901         struct drm_device *dev = crtc->dev;
1902         struct drm_mode_config *mode_config = &dev->mode_config;
1903         struct drm_encoder *encoder;
1904
1905         list_for_each_entry(encoder, &mode_config->encoder_list, head) {
1906                 struct intel_dp *intel_dp;
1907
1908                 if (encoder->crtc != crtc)
1909                         continue;
1910
1911                 intel_dp = enc_to_intel_dp(encoder);
1912                 if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT)
1913                         return intel_dp->output_reg;
1914         }
1915
1916         return -1;
1917 }
1918
1919 /* check the VBT to see whether the eDP is on DP-D port */
1920 bool intel_dpd_is_edp(struct drm_device *dev)
1921 {
1922         struct drm_i915_private *dev_priv = dev->dev_private;
1923         struct child_device_config *p_child;
1924         int i;
1925
1926         if (!dev_priv->child_dev_num)
1927                 return false;
1928
1929         for (i = 0; i < dev_priv->child_dev_num; i++) {
1930                 p_child = dev_priv->child_dev + i;
1931
1932                 if (p_child->dvo_port == PORT_IDPD &&
1933                     p_child->device_type == DEVICE_TYPE_eDP)
1934                         return true;
1935         }
1936         return false;
1937 }
1938
1939 static void
1940 intel_dp_add_properties(struct intel_dp *intel_dp, struct drm_connector *connector)
1941 {
1942         intel_attach_force_audio_property(connector);
1943         intel_attach_broadcast_rgb_property(connector);
1944 }
1945
1946 void
1947 intel_dp_init(struct drm_device *dev, int output_reg)
1948 {
1949         struct drm_i915_private *dev_priv = dev->dev_private;
1950         struct drm_connector *connector;
1951         struct intel_dp *intel_dp;
1952         struct intel_encoder *intel_encoder;
1953         struct intel_connector *intel_connector;
1954         const char *name = NULL;
1955         int type;
1956
1957         intel_dp = kzalloc(sizeof(struct intel_dp), GFP_KERNEL);
1958         if (!intel_dp)
1959                 return;
1960
1961         intel_dp->output_reg = output_reg;
1962         intel_dp->dpms_mode = -1;
1963
1964         intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL);
1965         if (!intel_connector) {
1966                 kfree(intel_dp);
1967                 return;
1968         }
1969         intel_encoder = &intel_dp->base;
1970
1971         if (HAS_PCH_SPLIT(dev) && output_reg == PCH_DP_D)
1972                 if (intel_dpd_is_edp(dev))
1973                         intel_dp->is_pch_edp = true;
1974
1975         if (output_reg == DP_A || is_pch_edp(intel_dp)) {
1976                 type = DRM_MODE_CONNECTOR_eDP;
1977                 intel_encoder->type = INTEL_OUTPUT_EDP;
1978         } else {
1979                 type = DRM_MODE_CONNECTOR_DisplayPort;
1980                 intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT;
1981         }
1982
1983         connector = &intel_connector->base;
1984         drm_connector_init(dev, connector, &intel_dp_connector_funcs, type);
1985         drm_connector_helper_add(connector, &intel_dp_connector_helper_funcs);
1986
1987         connector->polled = DRM_CONNECTOR_POLL_HPD;
1988
1989         if (output_reg == DP_B || output_reg == PCH_DP_B)
1990                 intel_encoder->clone_mask = (1 << INTEL_DP_B_CLONE_BIT);
1991         else if (output_reg == DP_C || output_reg == PCH_DP_C)
1992                 intel_encoder->clone_mask = (1 << INTEL_DP_C_CLONE_BIT);
1993         else if (output_reg == DP_D || output_reg == PCH_DP_D)
1994                 intel_encoder->clone_mask = (1 << INTEL_DP_D_CLONE_BIT);
1995
1996         if (is_edp(intel_dp))
1997                 intel_encoder->clone_mask = (1 << INTEL_EDP_CLONE_BIT);
1998
1999         intel_encoder->crtc_mask = (1 << 0) | (1 << 1);
2000         connector->interlace_allowed = true;
2001         connector->doublescan_allowed = 0;
2002
2003         drm_encoder_init(dev, &intel_encoder->base, &intel_dp_enc_funcs,
2004                          DRM_MODE_ENCODER_TMDS);
2005         drm_encoder_helper_add(&intel_encoder->base, &intel_dp_helper_funcs);
2006
2007         intel_connector_attach_encoder(intel_connector, intel_encoder);
2008         drm_sysfs_connector_add(connector);
2009
2010         /* Set up the DDC bus. */
2011         switch (output_reg) {
2012                 case DP_A:
2013                         name = "DPDDC-A";
2014                         break;
2015                 case DP_B:
2016                 case PCH_DP_B:
2017                         dev_priv->hotplug_supported_mask |=
2018                                 HDMIB_HOTPLUG_INT_STATUS;
2019                         name = "DPDDC-B";
2020                         break;
2021                 case DP_C:
2022                 case PCH_DP_C:
2023                         dev_priv->hotplug_supported_mask |=
2024                                 HDMIC_HOTPLUG_INT_STATUS;
2025                         name = "DPDDC-C";
2026                         break;
2027                 case DP_D:
2028                 case PCH_DP_D:
2029                         dev_priv->hotplug_supported_mask |=
2030                                 HDMID_HOTPLUG_INT_STATUS;
2031                         name = "DPDDC-D";
2032                         break;
2033         }
2034
2035         intel_dp_i2c_init(intel_dp, intel_connector, name);
2036
2037         /* Cache some DPCD data in the eDP case */
2038         if (is_edp(intel_dp)) {
2039                 bool ret;
2040                 u32 pp_on, pp_div;
2041
2042                 pp_on = I915_READ(PCH_PP_ON_DELAYS);
2043                 pp_div = I915_READ(PCH_PP_DIVISOR);
2044
2045                 /* Get T3 & T12 values (note: VESA not bspec terminology) */
2046                 dev_priv->panel_t3 = (pp_on & 0x1fff0000) >> 16;
2047                 dev_priv->panel_t3 /= 10; /* t3 in 100us units */
2048                 dev_priv->panel_t12 = pp_div & 0xf;
2049                 dev_priv->panel_t12 *= 100; /* t12 in 100ms units */
2050
2051                 ironlake_edp_panel_vdd_on(intel_dp);
2052                 ret = intel_dp_get_dpcd(intel_dp);
2053                 ironlake_edp_panel_vdd_off(intel_dp);
2054                 if (ret) {
2055                         if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11)
2056                                 dev_priv->no_aux_handshake =
2057                                         intel_dp->dpcd[DP_MAX_DOWNSPREAD] &
2058                                         DP_NO_AUX_HANDSHAKE_LINK_TRAINING;
2059                 } else {
2060                         /* if this fails, presume the device is a ghost */
2061                         DRM_INFO("failed to retrieve link info, disabling eDP\n");
2062                         intel_dp_encoder_destroy(&intel_dp->base.base);
2063                         intel_dp_destroy(&intel_connector->base);
2064                         return;
2065                 }
2066         }
2067
2068         intel_encoder->hot_plug = intel_dp_hot_plug;
2069
2070         if (is_edp(intel_dp)) {
2071                 /* initialize panel mode from VBT if available for eDP */
2072                 if (dev_priv->lfp_lvds_vbt_mode) {
2073                         dev_priv->panel_fixed_mode =
2074                                 drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode);
2075                         if (dev_priv->panel_fixed_mode) {
2076                                 dev_priv->panel_fixed_mode->type |=
2077                                         DRM_MODE_TYPE_PREFERRED;
2078                         }
2079                 }
2080                 dev_priv->int_edp_connector = connector;
2081                 intel_panel_setup_backlight(dev);
2082         }
2083
2084         intel_dp_add_properties(intel_dp, connector);
2085
2086         /* For G4X desktop chip, PEG_BAND_GAP_DATA 3:0 must first be written
2087          * 0xd.  Failure to do so will result in spurious interrupts being
2088          * generated on the port when a cable is not attached.
2089          */
2090         if (IS_G4X(dev) && !IS_GM45(dev)) {
2091                 u32 temp = I915_READ(PEG_BAND_GAP_DATA);
2092                 I915_WRITE(PEG_BAND_GAP_DATA, (temp & ~0xf) | 0xd);
2093         }
2094 }