2 * Copyright © 2006-2007 Intel Corporation
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
11 * The above copyright notice and this permission notice (including the next
12 * paragraph) shall be included in all copies or substantial portions of the
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
21 * DEALINGS IN THE SOFTWARE.
24 * Eric Anholt <eric@anholt.net>
27 #include <linux/module.h>
28 #include <linux/input.h>
29 #include <linux/i2c.h>
30 #include <linux/kernel.h>
31 #include <linux/slab.h>
32 #include <linux/vgaarb.h>
34 #include "intel_drv.h"
37 #include "i915_trace.h"
38 #include "drm_dp_helper.h"
40 #include "drm_crtc_helper.h"
42 #define HAS_eDP (intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))
44 bool intel_pipe_has_type (struct drm_crtc *crtc, int type);
45 static void intel_update_watermarks(struct drm_device *dev);
46 static void intel_increase_pllclock(struct drm_crtc *crtc, bool schedule);
47 static void intel_crtc_update_cursor(struct drm_crtc *crtc);
70 #define INTEL_P2_NUM 2
71 typedef struct intel_limit intel_limit_t;
73 intel_range_t dot, vco, n, m, m1, m2, p, p1;
75 bool (* find_pll)(const intel_limit_t *, struct drm_crtc *,
76 int, int, intel_clock_t *);
79 #define I8XX_DOT_MIN 25000
80 #define I8XX_DOT_MAX 350000
81 #define I8XX_VCO_MIN 930000
82 #define I8XX_VCO_MAX 1400000
86 #define I8XX_M_MAX 140
87 #define I8XX_M1_MIN 18
88 #define I8XX_M1_MAX 26
90 #define I8XX_M2_MAX 16
92 #define I8XX_P_MAX 128
94 #define I8XX_P1_MAX 33
95 #define I8XX_P1_LVDS_MIN 1
96 #define I8XX_P1_LVDS_MAX 6
97 #define I8XX_P2_SLOW 4
98 #define I8XX_P2_FAST 2
99 #define I8XX_P2_LVDS_SLOW 14
100 #define I8XX_P2_LVDS_FAST 7
101 #define I8XX_P2_SLOW_LIMIT 165000
103 #define I9XX_DOT_MIN 20000
104 #define I9XX_DOT_MAX 400000
105 #define I9XX_VCO_MIN 1400000
106 #define I9XX_VCO_MAX 2800000
107 #define PINEVIEW_VCO_MIN 1700000
108 #define PINEVIEW_VCO_MAX 3500000
111 /* Pineview's Ncounter is a ring counter */
112 #define PINEVIEW_N_MIN 3
113 #define PINEVIEW_N_MAX 6
114 #define I9XX_M_MIN 70
115 #define I9XX_M_MAX 120
116 #define PINEVIEW_M_MIN 2
117 #define PINEVIEW_M_MAX 256
118 #define I9XX_M1_MIN 10
119 #define I9XX_M1_MAX 22
120 #define I9XX_M2_MIN 5
121 #define I9XX_M2_MAX 9
122 /* Pineview M1 is reserved, and must be 0 */
123 #define PINEVIEW_M1_MIN 0
124 #define PINEVIEW_M1_MAX 0
125 #define PINEVIEW_M2_MIN 0
126 #define PINEVIEW_M2_MAX 254
127 #define I9XX_P_SDVO_DAC_MIN 5
128 #define I9XX_P_SDVO_DAC_MAX 80
129 #define I9XX_P_LVDS_MIN 7
130 #define I9XX_P_LVDS_MAX 98
131 #define PINEVIEW_P_LVDS_MIN 7
132 #define PINEVIEW_P_LVDS_MAX 112
133 #define I9XX_P1_MIN 1
134 #define I9XX_P1_MAX 8
135 #define I9XX_P2_SDVO_DAC_SLOW 10
136 #define I9XX_P2_SDVO_DAC_FAST 5
137 #define I9XX_P2_SDVO_DAC_SLOW_LIMIT 200000
138 #define I9XX_P2_LVDS_SLOW 14
139 #define I9XX_P2_LVDS_FAST 7
140 #define I9XX_P2_LVDS_SLOW_LIMIT 112000
142 /*The parameter is for SDVO on G4x platform*/
143 #define G4X_DOT_SDVO_MIN 25000
144 #define G4X_DOT_SDVO_MAX 270000
145 #define G4X_VCO_MIN 1750000
146 #define G4X_VCO_MAX 3500000
147 #define G4X_N_SDVO_MIN 1
148 #define G4X_N_SDVO_MAX 4
149 #define G4X_M_SDVO_MIN 104
150 #define G4X_M_SDVO_MAX 138
151 #define G4X_M1_SDVO_MIN 17
152 #define G4X_M1_SDVO_MAX 23
153 #define G4X_M2_SDVO_MIN 5
154 #define G4X_M2_SDVO_MAX 11
155 #define G4X_P_SDVO_MIN 10
156 #define G4X_P_SDVO_MAX 30
157 #define G4X_P1_SDVO_MIN 1
158 #define G4X_P1_SDVO_MAX 3
159 #define G4X_P2_SDVO_SLOW 10
160 #define G4X_P2_SDVO_FAST 10
161 #define G4X_P2_SDVO_LIMIT 270000
163 /*The parameter is for HDMI_DAC on G4x platform*/
164 #define G4X_DOT_HDMI_DAC_MIN 22000
165 #define G4X_DOT_HDMI_DAC_MAX 400000
166 #define G4X_N_HDMI_DAC_MIN 1
167 #define G4X_N_HDMI_DAC_MAX 4
168 #define G4X_M_HDMI_DAC_MIN 104
169 #define G4X_M_HDMI_DAC_MAX 138
170 #define G4X_M1_HDMI_DAC_MIN 16
171 #define G4X_M1_HDMI_DAC_MAX 23
172 #define G4X_M2_HDMI_DAC_MIN 5
173 #define G4X_M2_HDMI_DAC_MAX 11
174 #define G4X_P_HDMI_DAC_MIN 5
175 #define G4X_P_HDMI_DAC_MAX 80
176 #define G4X_P1_HDMI_DAC_MIN 1
177 #define G4X_P1_HDMI_DAC_MAX 8
178 #define G4X_P2_HDMI_DAC_SLOW 10
179 #define G4X_P2_HDMI_DAC_FAST 5
180 #define G4X_P2_HDMI_DAC_LIMIT 165000
182 /*The parameter is for SINGLE_CHANNEL_LVDS on G4x platform*/
183 #define G4X_DOT_SINGLE_CHANNEL_LVDS_MIN 20000
184 #define G4X_DOT_SINGLE_CHANNEL_LVDS_MAX 115000
185 #define G4X_N_SINGLE_CHANNEL_LVDS_MIN 1
186 #define G4X_N_SINGLE_CHANNEL_LVDS_MAX 3
187 #define G4X_M_SINGLE_CHANNEL_LVDS_MIN 104
188 #define G4X_M_SINGLE_CHANNEL_LVDS_MAX 138
189 #define G4X_M1_SINGLE_CHANNEL_LVDS_MIN 17
190 #define G4X_M1_SINGLE_CHANNEL_LVDS_MAX 23
191 #define G4X_M2_SINGLE_CHANNEL_LVDS_MIN 5
192 #define G4X_M2_SINGLE_CHANNEL_LVDS_MAX 11
193 #define G4X_P_SINGLE_CHANNEL_LVDS_MIN 28
194 #define G4X_P_SINGLE_CHANNEL_LVDS_MAX 112
195 #define G4X_P1_SINGLE_CHANNEL_LVDS_MIN 2
196 #define G4X_P1_SINGLE_CHANNEL_LVDS_MAX 8
197 #define G4X_P2_SINGLE_CHANNEL_LVDS_SLOW 14
198 #define G4X_P2_SINGLE_CHANNEL_LVDS_FAST 14
199 #define G4X_P2_SINGLE_CHANNEL_LVDS_LIMIT 0
201 /*The parameter is for DUAL_CHANNEL_LVDS on G4x platform*/
202 #define G4X_DOT_DUAL_CHANNEL_LVDS_MIN 80000
203 #define G4X_DOT_DUAL_CHANNEL_LVDS_MAX 224000
204 #define G4X_N_DUAL_CHANNEL_LVDS_MIN 1
205 #define G4X_N_DUAL_CHANNEL_LVDS_MAX 3
206 #define G4X_M_DUAL_CHANNEL_LVDS_MIN 104
207 #define G4X_M_DUAL_CHANNEL_LVDS_MAX 138
208 #define G4X_M1_DUAL_CHANNEL_LVDS_MIN 17
209 #define G4X_M1_DUAL_CHANNEL_LVDS_MAX 23
210 #define G4X_M2_DUAL_CHANNEL_LVDS_MIN 5
211 #define G4X_M2_DUAL_CHANNEL_LVDS_MAX 11
212 #define G4X_P_DUAL_CHANNEL_LVDS_MIN 14
213 #define G4X_P_DUAL_CHANNEL_LVDS_MAX 42
214 #define G4X_P1_DUAL_CHANNEL_LVDS_MIN 2
215 #define G4X_P1_DUAL_CHANNEL_LVDS_MAX 6
216 #define G4X_P2_DUAL_CHANNEL_LVDS_SLOW 7
217 #define G4X_P2_DUAL_CHANNEL_LVDS_FAST 7
218 #define G4X_P2_DUAL_CHANNEL_LVDS_LIMIT 0
220 /*The parameter is for DISPLAY PORT on G4x platform*/
221 #define G4X_DOT_DISPLAY_PORT_MIN 161670
222 #define G4X_DOT_DISPLAY_PORT_MAX 227000
223 #define G4X_N_DISPLAY_PORT_MIN 1
224 #define G4X_N_DISPLAY_PORT_MAX 2
225 #define G4X_M_DISPLAY_PORT_MIN 97
226 #define G4X_M_DISPLAY_PORT_MAX 108
227 #define G4X_M1_DISPLAY_PORT_MIN 0x10
228 #define G4X_M1_DISPLAY_PORT_MAX 0x12
229 #define G4X_M2_DISPLAY_PORT_MIN 0x05
230 #define G4X_M2_DISPLAY_PORT_MAX 0x06
231 #define G4X_P_DISPLAY_PORT_MIN 10
232 #define G4X_P_DISPLAY_PORT_MAX 20
233 #define G4X_P1_DISPLAY_PORT_MIN 1
234 #define G4X_P1_DISPLAY_PORT_MAX 2
235 #define G4X_P2_DISPLAY_PORT_SLOW 10
236 #define G4X_P2_DISPLAY_PORT_FAST 10
237 #define G4X_P2_DISPLAY_PORT_LIMIT 0
239 /* Ironlake / Sandybridge */
240 /* as we calculate clock using (register_value + 2) for
241 N/M1/M2, so here the range value for them is (actual_value-2).
243 #define IRONLAKE_DOT_MIN 25000
244 #define IRONLAKE_DOT_MAX 350000
245 #define IRONLAKE_VCO_MIN 1760000
246 #define IRONLAKE_VCO_MAX 3510000
247 #define IRONLAKE_M1_MIN 12
248 #define IRONLAKE_M1_MAX 22
249 #define IRONLAKE_M2_MIN 5
250 #define IRONLAKE_M2_MAX 9
251 #define IRONLAKE_P2_DOT_LIMIT 225000 /* 225Mhz */
253 /* We have parameter ranges for different type of outputs. */
255 /* DAC & HDMI Refclk 120Mhz */
256 #define IRONLAKE_DAC_N_MIN 1
257 #define IRONLAKE_DAC_N_MAX 5
258 #define IRONLAKE_DAC_M_MIN 79
259 #define IRONLAKE_DAC_M_MAX 127
260 #define IRONLAKE_DAC_P_MIN 5
261 #define IRONLAKE_DAC_P_MAX 80
262 #define IRONLAKE_DAC_P1_MIN 1
263 #define IRONLAKE_DAC_P1_MAX 8
264 #define IRONLAKE_DAC_P2_SLOW 10
265 #define IRONLAKE_DAC_P2_FAST 5
267 /* LVDS single-channel 120Mhz refclk */
268 #define IRONLAKE_LVDS_S_N_MIN 1
269 #define IRONLAKE_LVDS_S_N_MAX 3
270 #define IRONLAKE_LVDS_S_M_MIN 79
271 #define IRONLAKE_LVDS_S_M_MAX 118
272 #define IRONLAKE_LVDS_S_P_MIN 28
273 #define IRONLAKE_LVDS_S_P_MAX 112
274 #define IRONLAKE_LVDS_S_P1_MIN 2
275 #define IRONLAKE_LVDS_S_P1_MAX 8
276 #define IRONLAKE_LVDS_S_P2_SLOW 14
277 #define IRONLAKE_LVDS_S_P2_FAST 14
279 /* LVDS dual-channel 120Mhz refclk */
280 #define IRONLAKE_LVDS_D_N_MIN 1
281 #define IRONLAKE_LVDS_D_N_MAX 3
282 #define IRONLAKE_LVDS_D_M_MIN 79
283 #define IRONLAKE_LVDS_D_M_MAX 127
284 #define IRONLAKE_LVDS_D_P_MIN 14
285 #define IRONLAKE_LVDS_D_P_MAX 56
286 #define IRONLAKE_LVDS_D_P1_MIN 2
287 #define IRONLAKE_LVDS_D_P1_MAX 8
288 #define IRONLAKE_LVDS_D_P2_SLOW 7
289 #define IRONLAKE_LVDS_D_P2_FAST 7
291 /* LVDS single-channel 100Mhz refclk */
292 #define IRONLAKE_LVDS_S_SSC_N_MIN 1
293 #define IRONLAKE_LVDS_S_SSC_N_MAX 2
294 #define IRONLAKE_LVDS_S_SSC_M_MIN 79
295 #define IRONLAKE_LVDS_S_SSC_M_MAX 126
296 #define IRONLAKE_LVDS_S_SSC_P_MIN 28
297 #define IRONLAKE_LVDS_S_SSC_P_MAX 112
298 #define IRONLAKE_LVDS_S_SSC_P1_MIN 2
299 #define IRONLAKE_LVDS_S_SSC_P1_MAX 8
300 #define IRONLAKE_LVDS_S_SSC_P2_SLOW 14
301 #define IRONLAKE_LVDS_S_SSC_P2_FAST 14
303 /* LVDS dual-channel 100Mhz refclk */
304 #define IRONLAKE_LVDS_D_SSC_N_MIN 1
305 #define IRONLAKE_LVDS_D_SSC_N_MAX 3
306 #define IRONLAKE_LVDS_D_SSC_M_MIN 79
307 #define IRONLAKE_LVDS_D_SSC_M_MAX 126
308 #define IRONLAKE_LVDS_D_SSC_P_MIN 14
309 #define IRONLAKE_LVDS_D_SSC_P_MAX 42
310 #define IRONLAKE_LVDS_D_SSC_P1_MIN 2
311 #define IRONLAKE_LVDS_D_SSC_P1_MAX 6
312 #define IRONLAKE_LVDS_D_SSC_P2_SLOW 7
313 #define IRONLAKE_LVDS_D_SSC_P2_FAST 7
316 #define IRONLAKE_DP_N_MIN 1
317 #define IRONLAKE_DP_N_MAX 2
318 #define IRONLAKE_DP_M_MIN 81
319 #define IRONLAKE_DP_M_MAX 90
320 #define IRONLAKE_DP_P_MIN 10
321 #define IRONLAKE_DP_P_MAX 20
322 #define IRONLAKE_DP_P2_FAST 10
323 #define IRONLAKE_DP_P2_SLOW 10
324 #define IRONLAKE_DP_P2_LIMIT 0
325 #define IRONLAKE_DP_P1_MIN 1
326 #define IRONLAKE_DP_P1_MAX 2
329 #define IRONLAKE_FDI_FREQ 2700000 /* in kHz for mode->clock */
332 intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
333 int target, int refclk, intel_clock_t *best_clock);
335 intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
336 int target, int refclk, intel_clock_t *best_clock);
339 intel_find_pll_g4x_dp(const intel_limit_t *, struct drm_crtc *crtc,
340 int target, int refclk, intel_clock_t *best_clock);
342 intel_find_pll_ironlake_dp(const intel_limit_t *, struct drm_crtc *crtc,
343 int target, int refclk, intel_clock_t *best_clock);
345 static const intel_limit_t intel_limits_i8xx_dvo = {
346 .dot = { .min = I8XX_DOT_MIN, .max = I8XX_DOT_MAX },
347 .vco = { .min = I8XX_VCO_MIN, .max = I8XX_VCO_MAX },
348 .n = { .min = I8XX_N_MIN, .max = I8XX_N_MAX },
349 .m = { .min = I8XX_M_MIN, .max = I8XX_M_MAX },
350 .m1 = { .min = I8XX_M1_MIN, .max = I8XX_M1_MAX },
351 .m2 = { .min = I8XX_M2_MIN, .max = I8XX_M2_MAX },
352 .p = { .min = I8XX_P_MIN, .max = I8XX_P_MAX },
353 .p1 = { .min = I8XX_P1_MIN, .max = I8XX_P1_MAX },
354 .p2 = { .dot_limit = I8XX_P2_SLOW_LIMIT,
355 .p2_slow = I8XX_P2_SLOW, .p2_fast = I8XX_P2_FAST },
356 .find_pll = intel_find_best_PLL,
359 static const intel_limit_t intel_limits_i8xx_lvds = {
360 .dot = { .min = I8XX_DOT_MIN, .max = I8XX_DOT_MAX },
361 .vco = { .min = I8XX_VCO_MIN, .max = I8XX_VCO_MAX },
362 .n = { .min = I8XX_N_MIN, .max = I8XX_N_MAX },
363 .m = { .min = I8XX_M_MIN, .max = I8XX_M_MAX },
364 .m1 = { .min = I8XX_M1_MIN, .max = I8XX_M1_MAX },
365 .m2 = { .min = I8XX_M2_MIN, .max = I8XX_M2_MAX },
366 .p = { .min = I8XX_P_MIN, .max = I8XX_P_MAX },
367 .p1 = { .min = I8XX_P1_LVDS_MIN, .max = I8XX_P1_LVDS_MAX },
368 .p2 = { .dot_limit = I8XX_P2_SLOW_LIMIT,
369 .p2_slow = I8XX_P2_LVDS_SLOW, .p2_fast = I8XX_P2_LVDS_FAST },
370 .find_pll = intel_find_best_PLL,
373 static const intel_limit_t intel_limits_i9xx_sdvo = {
374 .dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX },
375 .vco = { .min = I9XX_VCO_MIN, .max = I9XX_VCO_MAX },
376 .n = { .min = I9XX_N_MIN, .max = I9XX_N_MAX },
377 .m = { .min = I9XX_M_MIN, .max = I9XX_M_MAX },
378 .m1 = { .min = I9XX_M1_MIN, .max = I9XX_M1_MAX },
379 .m2 = { .min = I9XX_M2_MIN, .max = I9XX_M2_MAX },
380 .p = { .min = I9XX_P_SDVO_DAC_MIN, .max = I9XX_P_SDVO_DAC_MAX },
381 .p1 = { .min = I9XX_P1_MIN, .max = I9XX_P1_MAX },
382 .p2 = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT,
383 .p2_slow = I9XX_P2_SDVO_DAC_SLOW, .p2_fast = I9XX_P2_SDVO_DAC_FAST },
384 .find_pll = intel_find_best_PLL,
387 static const intel_limit_t intel_limits_i9xx_lvds = {
388 .dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX },
389 .vco = { .min = I9XX_VCO_MIN, .max = I9XX_VCO_MAX },
390 .n = { .min = I9XX_N_MIN, .max = I9XX_N_MAX },
391 .m = { .min = I9XX_M_MIN, .max = I9XX_M_MAX },
392 .m1 = { .min = I9XX_M1_MIN, .max = I9XX_M1_MAX },
393 .m2 = { .min = I9XX_M2_MIN, .max = I9XX_M2_MAX },
394 .p = { .min = I9XX_P_LVDS_MIN, .max = I9XX_P_LVDS_MAX },
395 .p1 = { .min = I9XX_P1_MIN, .max = I9XX_P1_MAX },
396 /* The single-channel range is 25-112Mhz, and dual-channel
397 * is 80-224Mhz. Prefer single channel as much as possible.
399 .p2 = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT,
400 .p2_slow = I9XX_P2_LVDS_SLOW, .p2_fast = I9XX_P2_LVDS_FAST },
401 .find_pll = intel_find_best_PLL,
404 /* below parameter and function is for G4X Chipset Family*/
405 static const intel_limit_t intel_limits_g4x_sdvo = {
406 .dot = { .min = G4X_DOT_SDVO_MIN, .max = G4X_DOT_SDVO_MAX },
407 .vco = { .min = G4X_VCO_MIN, .max = G4X_VCO_MAX},
408 .n = { .min = G4X_N_SDVO_MIN, .max = G4X_N_SDVO_MAX },
409 .m = { .min = G4X_M_SDVO_MIN, .max = G4X_M_SDVO_MAX },
410 .m1 = { .min = G4X_M1_SDVO_MIN, .max = G4X_M1_SDVO_MAX },
411 .m2 = { .min = G4X_M2_SDVO_MIN, .max = G4X_M2_SDVO_MAX },
412 .p = { .min = G4X_P_SDVO_MIN, .max = G4X_P_SDVO_MAX },
413 .p1 = { .min = G4X_P1_SDVO_MIN, .max = G4X_P1_SDVO_MAX},
414 .p2 = { .dot_limit = G4X_P2_SDVO_LIMIT,
415 .p2_slow = G4X_P2_SDVO_SLOW,
416 .p2_fast = G4X_P2_SDVO_FAST
418 .find_pll = intel_g4x_find_best_PLL,
421 static const intel_limit_t intel_limits_g4x_hdmi = {
422 .dot = { .min = G4X_DOT_HDMI_DAC_MIN, .max = G4X_DOT_HDMI_DAC_MAX },
423 .vco = { .min = G4X_VCO_MIN, .max = G4X_VCO_MAX},
424 .n = { .min = G4X_N_HDMI_DAC_MIN, .max = G4X_N_HDMI_DAC_MAX },
425 .m = { .min = G4X_M_HDMI_DAC_MIN, .max = G4X_M_HDMI_DAC_MAX },
426 .m1 = { .min = G4X_M1_HDMI_DAC_MIN, .max = G4X_M1_HDMI_DAC_MAX },
427 .m2 = { .min = G4X_M2_HDMI_DAC_MIN, .max = G4X_M2_HDMI_DAC_MAX },
428 .p = { .min = G4X_P_HDMI_DAC_MIN, .max = G4X_P_HDMI_DAC_MAX },
429 .p1 = { .min = G4X_P1_HDMI_DAC_MIN, .max = G4X_P1_HDMI_DAC_MAX},
430 .p2 = { .dot_limit = G4X_P2_HDMI_DAC_LIMIT,
431 .p2_slow = G4X_P2_HDMI_DAC_SLOW,
432 .p2_fast = G4X_P2_HDMI_DAC_FAST
434 .find_pll = intel_g4x_find_best_PLL,
437 static const intel_limit_t intel_limits_g4x_single_channel_lvds = {
438 .dot = { .min = G4X_DOT_SINGLE_CHANNEL_LVDS_MIN,
439 .max = G4X_DOT_SINGLE_CHANNEL_LVDS_MAX },
440 .vco = { .min = G4X_VCO_MIN,
441 .max = G4X_VCO_MAX },
442 .n = { .min = G4X_N_SINGLE_CHANNEL_LVDS_MIN,
443 .max = G4X_N_SINGLE_CHANNEL_LVDS_MAX },
444 .m = { .min = G4X_M_SINGLE_CHANNEL_LVDS_MIN,
445 .max = G4X_M_SINGLE_CHANNEL_LVDS_MAX },
446 .m1 = { .min = G4X_M1_SINGLE_CHANNEL_LVDS_MIN,
447 .max = G4X_M1_SINGLE_CHANNEL_LVDS_MAX },
448 .m2 = { .min = G4X_M2_SINGLE_CHANNEL_LVDS_MIN,
449 .max = G4X_M2_SINGLE_CHANNEL_LVDS_MAX },
450 .p = { .min = G4X_P_SINGLE_CHANNEL_LVDS_MIN,
451 .max = G4X_P_SINGLE_CHANNEL_LVDS_MAX },
452 .p1 = { .min = G4X_P1_SINGLE_CHANNEL_LVDS_MIN,
453 .max = G4X_P1_SINGLE_CHANNEL_LVDS_MAX },
454 .p2 = { .dot_limit = G4X_P2_SINGLE_CHANNEL_LVDS_LIMIT,
455 .p2_slow = G4X_P2_SINGLE_CHANNEL_LVDS_SLOW,
456 .p2_fast = G4X_P2_SINGLE_CHANNEL_LVDS_FAST
458 .find_pll = intel_g4x_find_best_PLL,
461 static const intel_limit_t intel_limits_g4x_dual_channel_lvds = {
462 .dot = { .min = G4X_DOT_DUAL_CHANNEL_LVDS_MIN,
463 .max = G4X_DOT_DUAL_CHANNEL_LVDS_MAX },
464 .vco = { .min = G4X_VCO_MIN,
465 .max = G4X_VCO_MAX },
466 .n = { .min = G4X_N_DUAL_CHANNEL_LVDS_MIN,
467 .max = G4X_N_DUAL_CHANNEL_LVDS_MAX },
468 .m = { .min = G4X_M_DUAL_CHANNEL_LVDS_MIN,
469 .max = G4X_M_DUAL_CHANNEL_LVDS_MAX },
470 .m1 = { .min = G4X_M1_DUAL_CHANNEL_LVDS_MIN,
471 .max = G4X_M1_DUAL_CHANNEL_LVDS_MAX },
472 .m2 = { .min = G4X_M2_DUAL_CHANNEL_LVDS_MIN,
473 .max = G4X_M2_DUAL_CHANNEL_LVDS_MAX },
474 .p = { .min = G4X_P_DUAL_CHANNEL_LVDS_MIN,
475 .max = G4X_P_DUAL_CHANNEL_LVDS_MAX },
476 .p1 = { .min = G4X_P1_DUAL_CHANNEL_LVDS_MIN,
477 .max = G4X_P1_DUAL_CHANNEL_LVDS_MAX },
478 .p2 = { .dot_limit = G4X_P2_DUAL_CHANNEL_LVDS_LIMIT,
479 .p2_slow = G4X_P2_DUAL_CHANNEL_LVDS_SLOW,
480 .p2_fast = G4X_P2_DUAL_CHANNEL_LVDS_FAST
482 .find_pll = intel_g4x_find_best_PLL,
485 static const intel_limit_t intel_limits_g4x_display_port = {
486 .dot = { .min = G4X_DOT_DISPLAY_PORT_MIN,
487 .max = G4X_DOT_DISPLAY_PORT_MAX },
488 .vco = { .min = G4X_VCO_MIN,
490 .n = { .min = G4X_N_DISPLAY_PORT_MIN,
491 .max = G4X_N_DISPLAY_PORT_MAX },
492 .m = { .min = G4X_M_DISPLAY_PORT_MIN,
493 .max = G4X_M_DISPLAY_PORT_MAX },
494 .m1 = { .min = G4X_M1_DISPLAY_PORT_MIN,
495 .max = G4X_M1_DISPLAY_PORT_MAX },
496 .m2 = { .min = G4X_M2_DISPLAY_PORT_MIN,
497 .max = G4X_M2_DISPLAY_PORT_MAX },
498 .p = { .min = G4X_P_DISPLAY_PORT_MIN,
499 .max = G4X_P_DISPLAY_PORT_MAX },
500 .p1 = { .min = G4X_P1_DISPLAY_PORT_MIN,
501 .max = G4X_P1_DISPLAY_PORT_MAX},
502 .p2 = { .dot_limit = G4X_P2_DISPLAY_PORT_LIMIT,
503 .p2_slow = G4X_P2_DISPLAY_PORT_SLOW,
504 .p2_fast = G4X_P2_DISPLAY_PORT_FAST },
505 .find_pll = intel_find_pll_g4x_dp,
508 static const intel_limit_t intel_limits_pineview_sdvo = {
509 .dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX},
510 .vco = { .min = PINEVIEW_VCO_MIN, .max = PINEVIEW_VCO_MAX },
511 .n = { .min = PINEVIEW_N_MIN, .max = PINEVIEW_N_MAX },
512 .m = { .min = PINEVIEW_M_MIN, .max = PINEVIEW_M_MAX },
513 .m1 = { .min = PINEVIEW_M1_MIN, .max = PINEVIEW_M1_MAX },
514 .m2 = { .min = PINEVIEW_M2_MIN, .max = PINEVIEW_M2_MAX },
515 .p = { .min = I9XX_P_SDVO_DAC_MIN, .max = I9XX_P_SDVO_DAC_MAX },
516 .p1 = { .min = I9XX_P1_MIN, .max = I9XX_P1_MAX },
517 .p2 = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT,
518 .p2_slow = I9XX_P2_SDVO_DAC_SLOW, .p2_fast = I9XX_P2_SDVO_DAC_FAST },
519 .find_pll = intel_find_best_PLL,
522 static const intel_limit_t intel_limits_pineview_lvds = {
523 .dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX },
524 .vco = { .min = PINEVIEW_VCO_MIN, .max = PINEVIEW_VCO_MAX },
525 .n = { .min = PINEVIEW_N_MIN, .max = PINEVIEW_N_MAX },
526 .m = { .min = PINEVIEW_M_MIN, .max = PINEVIEW_M_MAX },
527 .m1 = { .min = PINEVIEW_M1_MIN, .max = PINEVIEW_M1_MAX },
528 .m2 = { .min = PINEVIEW_M2_MIN, .max = PINEVIEW_M2_MAX },
529 .p = { .min = PINEVIEW_P_LVDS_MIN, .max = PINEVIEW_P_LVDS_MAX },
530 .p1 = { .min = I9XX_P1_MIN, .max = I9XX_P1_MAX },
531 /* Pineview only supports single-channel mode. */
532 .p2 = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT,
533 .p2_slow = I9XX_P2_LVDS_SLOW, .p2_fast = I9XX_P2_LVDS_SLOW },
534 .find_pll = intel_find_best_PLL,
537 static const intel_limit_t intel_limits_ironlake_dac = {
538 .dot = { .min = IRONLAKE_DOT_MIN, .max = IRONLAKE_DOT_MAX },
539 .vco = { .min = IRONLAKE_VCO_MIN, .max = IRONLAKE_VCO_MAX },
540 .n = { .min = IRONLAKE_DAC_N_MIN, .max = IRONLAKE_DAC_N_MAX },
541 .m = { .min = IRONLAKE_DAC_M_MIN, .max = IRONLAKE_DAC_M_MAX },
542 .m1 = { .min = IRONLAKE_M1_MIN, .max = IRONLAKE_M1_MAX },
543 .m2 = { .min = IRONLAKE_M2_MIN, .max = IRONLAKE_M2_MAX },
544 .p = { .min = IRONLAKE_DAC_P_MIN, .max = IRONLAKE_DAC_P_MAX },
545 .p1 = { .min = IRONLAKE_DAC_P1_MIN, .max = IRONLAKE_DAC_P1_MAX },
546 .p2 = { .dot_limit = IRONLAKE_P2_DOT_LIMIT,
547 .p2_slow = IRONLAKE_DAC_P2_SLOW,
548 .p2_fast = IRONLAKE_DAC_P2_FAST },
549 .find_pll = intel_g4x_find_best_PLL,
552 static const intel_limit_t intel_limits_ironlake_single_lvds = {
553 .dot = { .min = IRONLAKE_DOT_MIN, .max = IRONLAKE_DOT_MAX },
554 .vco = { .min = IRONLAKE_VCO_MIN, .max = IRONLAKE_VCO_MAX },
555 .n = { .min = IRONLAKE_LVDS_S_N_MIN, .max = IRONLAKE_LVDS_S_N_MAX },
556 .m = { .min = IRONLAKE_LVDS_S_M_MIN, .max = IRONLAKE_LVDS_S_M_MAX },
557 .m1 = { .min = IRONLAKE_M1_MIN, .max = IRONLAKE_M1_MAX },
558 .m2 = { .min = IRONLAKE_M2_MIN, .max = IRONLAKE_M2_MAX },
559 .p = { .min = IRONLAKE_LVDS_S_P_MIN, .max = IRONLAKE_LVDS_S_P_MAX },
560 .p1 = { .min = IRONLAKE_LVDS_S_P1_MIN, .max = IRONLAKE_LVDS_S_P1_MAX },
561 .p2 = { .dot_limit = IRONLAKE_P2_DOT_LIMIT,
562 .p2_slow = IRONLAKE_LVDS_S_P2_SLOW,
563 .p2_fast = IRONLAKE_LVDS_S_P2_FAST },
564 .find_pll = intel_g4x_find_best_PLL,
567 static const intel_limit_t intel_limits_ironlake_dual_lvds = {
568 .dot = { .min = IRONLAKE_DOT_MIN, .max = IRONLAKE_DOT_MAX },
569 .vco = { .min = IRONLAKE_VCO_MIN, .max = IRONLAKE_VCO_MAX },
570 .n = { .min = IRONLAKE_LVDS_D_N_MIN, .max = IRONLAKE_LVDS_D_N_MAX },
571 .m = { .min = IRONLAKE_LVDS_D_M_MIN, .max = IRONLAKE_LVDS_D_M_MAX },
572 .m1 = { .min = IRONLAKE_M1_MIN, .max = IRONLAKE_M1_MAX },
573 .m2 = { .min = IRONLAKE_M2_MIN, .max = IRONLAKE_M2_MAX },
574 .p = { .min = IRONLAKE_LVDS_D_P_MIN, .max = IRONLAKE_LVDS_D_P_MAX },
575 .p1 = { .min = IRONLAKE_LVDS_D_P1_MIN, .max = IRONLAKE_LVDS_D_P1_MAX },
576 .p2 = { .dot_limit = IRONLAKE_P2_DOT_LIMIT,
577 .p2_slow = IRONLAKE_LVDS_D_P2_SLOW,
578 .p2_fast = IRONLAKE_LVDS_D_P2_FAST },
579 .find_pll = intel_g4x_find_best_PLL,
582 static const intel_limit_t intel_limits_ironlake_single_lvds_100m = {
583 .dot = { .min = IRONLAKE_DOT_MIN, .max = IRONLAKE_DOT_MAX },
584 .vco = { .min = IRONLAKE_VCO_MIN, .max = IRONLAKE_VCO_MAX },
585 .n = { .min = IRONLAKE_LVDS_S_SSC_N_MIN, .max = IRONLAKE_LVDS_S_SSC_N_MAX },
586 .m = { .min = IRONLAKE_LVDS_S_SSC_M_MIN, .max = IRONLAKE_LVDS_S_SSC_M_MAX },
587 .m1 = { .min = IRONLAKE_M1_MIN, .max = IRONLAKE_M1_MAX },
588 .m2 = { .min = IRONLAKE_M2_MIN, .max = IRONLAKE_M2_MAX },
589 .p = { .min = IRONLAKE_LVDS_S_SSC_P_MIN, .max = IRONLAKE_LVDS_S_SSC_P_MAX },
590 .p1 = { .min = IRONLAKE_LVDS_S_SSC_P1_MIN,.max = IRONLAKE_LVDS_S_SSC_P1_MAX },
591 .p2 = { .dot_limit = IRONLAKE_P2_DOT_LIMIT,
592 .p2_slow = IRONLAKE_LVDS_S_SSC_P2_SLOW,
593 .p2_fast = IRONLAKE_LVDS_S_SSC_P2_FAST },
594 .find_pll = intel_g4x_find_best_PLL,
597 static const intel_limit_t intel_limits_ironlake_dual_lvds_100m = {
598 .dot = { .min = IRONLAKE_DOT_MIN, .max = IRONLAKE_DOT_MAX },
599 .vco = { .min = IRONLAKE_VCO_MIN, .max = IRONLAKE_VCO_MAX },
600 .n = { .min = IRONLAKE_LVDS_D_SSC_N_MIN, .max = IRONLAKE_LVDS_D_SSC_N_MAX },
601 .m = { .min = IRONLAKE_LVDS_D_SSC_M_MIN, .max = IRONLAKE_LVDS_D_SSC_M_MAX },
602 .m1 = { .min = IRONLAKE_M1_MIN, .max = IRONLAKE_M1_MAX },
603 .m2 = { .min = IRONLAKE_M2_MIN, .max = IRONLAKE_M2_MAX },
604 .p = { .min = IRONLAKE_LVDS_D_SSC_P_MIN, .max = IRONLAKE_LVDS_D_SSC_P_MAX },
605 .p1 = { .min = IRONLAKE_LVDS_D_SSC_P1_MIN,.max = IRONLAKE_LVDS_D_SSC_P1_MAX },
606 .p2 = { .dot_limit = IRONLAKE_P2_DOT_LIMIT,
607 .p2_slow = IRONLAKE_LVDS_D_SSC_P2_SLOW,
608 .p2_fast = IRONLAKE_LVDS_D_SSC_P2_FAST },
609 .find_pll = intel_g4x_find_best_PLL,
612 static const intel_limit_t intel_limits_ironlake_display_port = {
613 .dot = { .min = IRONLAKE_DOT_MIN,
614 .max = IRONLAKE_DOT_MAX },
615 .vco = { .min = IRONLAKE_VCO_MIN,
616 .max = IRONLAKE_VCO_MAX},
617 .n = { .min = IRONLAKE_DP_N_MIN,
618 .max = IRONLAKE_DP_N_MAX },
619 .m = { .min = IRONLAKE_DP_M_MIN,
620 .max = IRONLAKE_DP_M_MAX },
621 .m1 = { .min = IRONLAKE_M1_MIN,
622 .max = IRONLAKE_M1_MAX },
623 .m2 = { .min = IRONLAKE_M2_MIN,
624 .max = IRONLAKE_M2_MAX },
625 .p = { .min = IRONLAKE_DP_P_MIN,
626 .max = IRONLAKE_DP_P_MAX },
627 .p1 = { .min = IRONLAKE_DP_P1_MIN,
628 .max = IRONLAKE_DP_P1_MAX},
629 .p2 = { .dot_limit = IRONLAKE_DP_P2_LIMIT,
630 .p2_slow = IRONLAKE_DP_P2_SLOW,
631 .p2_fast = IRONLAKE_DP_P2_FAST },
632 .find_pll = intel_find_pll_ironlake_dp,
635 static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc)
637 struct drm_device *dev = crtc->dev;
638 struct drm_i915_private *dev_priv = dev->dev_private;
639 const intel_limit_t *limit;
642 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
643 if (dev_priv->lvds_use_ssc && dev_priv->lvds_ssc_freq == 100)
646 if ((I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) ==
647 LVDS_CLKB_POWER_UP) {
648 /* LVDS dual channel */
650 limit = &intel_limits_ironlake_dual_lvds_100m;
652 limit = &intel_limits_ironlake_dual_lvds;
655 limit = &intel_limits_ironlake_single_lvds_100m;
657 limit = &intel_limits_ironlake_single_lvds;
659 } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
661 limit = &intel_limits_ironlake_display_port;
663 limit = &intel_limits_ironlake_dac;
668 static const intel_limit_t *intel_g4x_limit(struct drm_crtc *crtc)
670 struct drm_device *dev = crtc->dev;
671 struct drm_i915_private *dev_priv = dev->dev_private;
672 const intel_limit_t *limit;
674 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
675 if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
677 /* LVDS with dual channel */
678 limit = &intel_limits_g4x_dual_channel_lvds;
680 /* LVDS with dual channel */
681 limit = &intel_limits_g4x_single_channel_lvds;
682 } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI) ||
683 intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG)) {
684 limit = &intel_limits_g4x_hdmi;
685 } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) {
686 limit = &intel_limits_g4x_sdvo;
687 } else if (intel_pipe_has_type (crtc, INTEL_OUTPUT_DISPLAYPORT)) {
688 limit = &intel_limits_g4x_display_port;
689 } else /* The option is for other outputs */
690 limit = &intel_limits_i9xx_sdvo;
695 static const intel_limit_t *intel_limit(struct drm_crtc *crtc)
697 struct drm_device *dev = crtc->dev;
698 const intel_limit_t *limit;
700 if (HAS_PCH_SPLIT(dev))
701 limit = intel_ironlake_limit(crtc);
702 else if (IS_G4X(dev)) {
703 limit = intel_g4x_limit(crtc);
704 } else if (IS_I9XX(dev) && !IS_PINEVIEW(dev)) {
705 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
706 limit = &intel_limits_i9xx_lvds;
708 limit = &intel_limits_i9xx_sdvo;
709 } else if (IS_PINEVIEW(dev)) {
710 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
711 limit = &intel_limits_pineview_lvds;
713 limit = &intel_limits_pineview_sdvo;
715 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
716 limit = &intel_limits_i8xx_lvds;
718 limit = &intel_limits_i8xx_dvo;
723 /* m1 is reserved as 0 in Pineview, n is a ring counter */
724 static void pineview_clock(int refclk, intel_clock_t *clock)
726 clock->m = clock->m2 + 2;
727 clock->p = clock->p1 * clock->p2;
728 clock->vco = refclk * clock->m / clock->n;
729 clock->dot = clock->vco / clock->p;
732 static void intel_clock(struct drm_device *dev, int refclk, intel_clock_t *clock)
734 if (IS_PINEVIEW(dev)) {
735 pineview_clock(refclk, clock);
738 clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2);
739 clock->p = clock->p1 * clock->p2;
740 clock->vco = refclk * clock->m / (clock->n + 2);
741 clock->dot = clock->vco / clock->p;
745 * Returns whether any output on the specified pipe is of the specified type
747 bool intel_pipe_has_type (struct drm_crtc *crtc, int type)
749 struct drm_device *dev = crtc->dev;
750 struct drm_mode_config *mode_config = &dev->mode_config;
751 struct drm_encoder *l_entry;
753 list_for_each_entry(l_entry, &mode_config->encoder_list, head) {
754 if (l_entry && l_entry->crtc == crtc) {
755 struct intel_encoder *intel_encoder = enc_to_intel_encoder(l_entry);
756 if (intel_encoder->type == type)
763 #define INTELPllInvalid(s) do { /* DRM_DEBUG(s); */ return false; } while (0)
765 * Returns whether the given set of divisors are valid for a given refclk with
766 * the given connectors.
769 static bool intel_PLL_is_valid(struct drm_crtc *crtc, intel_clock_t *clock)
771 const intel_limit_t *limit = intel_limit (crtc);
772 struct drm_device *dev = crtc->dev;
774 if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1)
775 INTELPllInvalid ("p1 out of range\n");
776 if (clock->p < limit->p.min || limit->p.max < clock->p)
777 INTELPllInvalid ("p out of range\n");
778 if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2)
779 INTELPllInvalid ("m2 out of range\n");
780 if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1)
781 INTELPllInvalid ("m1 out of range\n");
782 if (clock->m1 <= clock->m2 && !IS_PINEVIEW(dev))
783 INTELPllInvalid ("m1 <= m2\n");
784 if (clock->m < limit->m.min || limit->m.max < clock->m)
785 INTELPllInvalid ("m out of range\n");
786 if (clock->n < limit->n.min || limit->n.max < clock->n)
787 INTELPllInvalid ("n out of range\n");
788 if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
789 INTELPllInvalid ("vco out of range\n");
790 /* XXX: We may need to be checking "Dot clock" depending on the multiplier,
791 * connector, etc., rather than just a single range.
793 if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
794 INTELPllInvalid ("dot out of range\n");
800 intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
801 int target, int refclk, intel_clock_t *best_clock)
804 struct drm_device *dev = crtc->dev;
805 struct drm_i915_private *dev_priv = dev->dev_private;
809 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
810 (I915_READ(LVDS)) != 0) {
812 * For LVDS, if the panel is on, just rely on its current
813 * settings for dual-channel. We haven't figured out how to
814 * reliably set up different single/dual channel state, if we
817 if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
819 clock.p2 = limit->p2.p2_fast;
821 clock.p2 = limit->p2.p2_slow;
823 if (target < limit->p2.dot_limit)
824 clock.p2 = limit->p2.p2_slow;
826 clock.p2 = limit->p2.p2_fast;
829 memset (best_clock, 0, sizeof (*best_clock));
831 for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
833 for (clock.m2 = limit->m2.min;
834 clock.m2 <= limit->m2.max; clock.m2++) {
835 /* m1 is always 0 in Pineview */
836 if (clock.m2 >= clock.m1 && !IS_PINEVIEW(dev))
838 for (clock.n = limit->n.min;
839 clock.n <= limit->n.max; clock.n++) {
840 for (clock.p1 = limit->p1.min;
841 clock.p1 <= limit->p1.max; clock.p1++) {
844 intel_clock(dev, refclk, &clock);
846 if (!intel_PLL_is_valid(crtc, &clock))
849 this_err = abs(clock.dot - target);
850 if (this_err < err) {
859 return (err != target);
863 intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
864 int target, int refclk, intel_clock_t *best_clock)
866 struct drm_device *dev = crtc->dev;
867 struct drm_i915_private *dev_priv = dev->dev_private;
871 /* approximately equals target * 0.00585 */
872 int err_most = (target >> 8) + (target >> 9);
875 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
878 if (HAS_PCH_SPLIT(dev))
882 if ((I915_READ(lvds_reg) & LVDS_CLKB_POWER_MASK) ==
884 clock.p2 = limit->p2.p2_fast;
886 clock.p2 = limit->p2.p2_slow;
888 if (target < limit->p2.dot_limit)
889 clock.p2 = limit->p2.p2_slow;
891 clock.p2 = limit->p2.p2_fast;
894 memset(best_clock, 0, sizeof(*best_clock));
895 max_n = limit->n.max;
896 /* based on hardware requirement, prefer smaller n to precision */
897 for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
898 /* based on hardware requirement, prefere larger m1,m2 */
899 for (clock.m1 = limit->m1.max;
900 clock.m1 >= limit->m1.min; clock.m1--) {
901 for (clock.m2 = limit->m2.max;
902 clock.m2 >= limit->m2.min; clock.m2--) {
903 for (clock.p1 = limit->p1.max;
904 clock.p1 >= limit->p1.min; clock.p1--) {
907 intel_clock(dev, refclk, &clock);
908 if (!intel_PLL_is_valid(crtc, &clock))
910 this_err = abs(clock.dot - target) ;
911 if (this_err < err_most) {
925 intel_find_pll_ironlake_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
926 int target, int refclk, intel_clock_t *best_clock)
928 struct drm_device *dev = crtc->dev;
931 /* return directly when it is eDP */
935 if (target < 200000) {
948 intel_clock(dev, refclk, &clock);
949 memcpy(best_clock, &clock, sizeof(intel_clock_t));
953 /* DisplayPort has only two frequencies, 162MHz and 270MHz */
955 intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
956 int target, int refclk, intel_clock_t *best_clock)
959 if (target < 200000) {
972 clock.m = 5 * (clock.m1 + 2) + (clock.m2 + 2);
973 clock.p = (clock.p1 * clock.p2);
974 clock.dot = 96000 * clock.m / (clock.n + 2) / clock.p;
976 memcpy(best_clock, &clock, sizeof(intel_clock_t));
981 * intel_wait_for_vblank - wait for vblank on a given pipe
983 * @pipe: pipe to wait for
985 * Wait for vblank to occur on a given pipe. Needed for various bits of
988 void intel_wait_for_vblank(struct drm_device *dev, int pipe)
990 struct drm_i915_private *dev_priv = dev->dev_private;
991 int pipestat_reg = (pipe == 0 ? PIPEASTAT : PIPEBSTAT);
993 /* Clear existing vblank status. Note this will clear any other
994 * sticky status fields as well.
996 * This races with i915_driver_irq_handler() with the result
997 * that either function could miss a vblank event. Here it is not
998 * fatal, as we will either wait upon the next vblank interrupt or
999 * timeout. Generally speaking intel_wait_for_vblank() is only
1000 * called during modeset at which time the GPU should be idle and
1001 * should *not* be performing page flips and thus not waiting on
1003 * Currently, the result of us stealing a vblank from the irq
1004 * handler is that a single frame will be skipped during swapbuffers.
1006 I915_WRITE(pipestat_reg,
1007 I915_READ(pipestat_reg) | PIPE_VBLANK_INTERRUPT_STATUS);
1009 /* Wait for vblank interrupt bit to set */
1010 if (wait_for((I915_READ(pipestat_reg) &
1011 PIPE_VBLANK_INTERRUPT_STATUS),
1013 DRM_DEBUG_KMS("vblank wait timed out\n");
1017 * intel_wait_for_vblank_off - wait for vblank after disabling a pipe
1019 * @pipe: pipe to wait for
1021 * After disabling a pipe, we can't wait for vblank in the usual way,
1022 * spinning on the vblank interrupt status bit, since we won't actually
1023 * see an interrupt when the pipe is disabled.
1025 * So this function waits for the display line value to settle (it
1026 * usually ends up stopping at the start of the next frame).
1028 void intel_wait_for_vblank_off(struct drm_device *dev, int pipe)
1030 struct drm_i915_private *dev_priv = dev->dev_private;
1031 int pipedsl_reg = (pipe == 0 ? PIPEADSL : PIPEBDSL);
1032 unsigned long timeout = jiffies + msecs_to_jiffies(100);
1035 /* Wait for the display line to settle */
1037 last_line = I915_READ(pipedsl_reg) & DSL_LINEMASK;
1039 } while (((I915_READ(pipedsl_reg) & DSL_LINEMASK) != last_line) &&
1040 time_after(timeout, jiffies));
1042 if (time_after(jiffies, timeout))
1043 DRM_DEBUG_KMS("vblank wait timed out\n");
1046 /* Parameters have changed, update FBC info */
1047 static void i8xx_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
1049 struct drm_device *dev = crtc->dev;
1050 struct drm_i915_private *dev_priv = dev->dev_private;
1051 struct drm_framebuffer *fb = crtc->fb;
1052 struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
1053 struct drm_i915_gem_object *obj_priv = to_intel_bo(intel_fb->obj);
1054 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
1056 u32 fbc_ctl, fbc_ctl2;
1058 dev_priv->cfb_pitch = dev_priv->cfb_size / FBC_LL_SIZE;
1060 if (fb->pitch < dev_priv->cfb_pitch)
1061 dev_priv->cfb_pitch = fb->pitch;
1063 /* FBC_CTL wants 64B units */
1064 dev_priv->cfb_pitch = (dev_priv->cfb_pitch / 64) - 1;
1065 dev_priv->cfb_fence = obj_priv->fence_reg;
1066 dev_priv->cfb_plane = intel_crtc->plane;
1067 plane = dev_priv->cfb_plane == 0 ? FBC_CTL_PLANEA : FBC_CTL_PLANEB;
1069 /* Clear old tags */
1070 for (i = 0; i < (FBC_LL_SIZE / 32) + 1; i++)
1071 I915_WRITE(FBC_TAG + (i * 4), 0);
1074 fbc_ctl2 = FBC_CTL_FENCE_DBL | FBC_CTL_IDLE_IMM | plane;
1075 if (obj_priv->tiling_mode != I915_TILING_NONE)
1076 fbc_ctl2 |= FBC_CTL_CPU_FENCE;
1077 I915_WRITE(FBC_CONTROL2, fbc_ctl2);
1078 I915_WRITE(FBC_FENCE_OFF, crtc->y);
1081 fbc_ctl = FBC_CTL_EN | FBC_CTL_PERIODIC;
1083 fbc_ctl |= FBC_CTL_C3_IDLE; /* 945 needs special SR handling */
1084 fbc_ctl |= (dev_priv->cfb_pitch & 0xff) << FBC_CTL_STRIDE_SHIFT;
1085 fbc_ctl |= (interval & 0x2fff) << FBC_CTL_INTERVAL_SHIFT;
1086 if (obj_priv->tiling_mode != I915_TILING_NONE)
1087 fbc_ctl |= dev_priv->cfb_fence;
1088 I915_WRITE(FBC_CONTROL, fbc_ctl);
1090 DRM_DEBUG_KMS("enabled FBC, pitch %ld, yoff %d, plane %d, ",
1091 dev_priv->cfb_pitch, crtc->y, dev_priv->cfb_plane);
1094 void i8xx_disable_fbc(struct drm_device *dev)
1096 struct drm_i915_private *dev_priv = dev->dev_private;
1099 if (!I915_HAS_FBC(dev))
1102 if (!(I915_READ(FBC_CONTROL) & FBC_CTL_EN))
1103 return; /* Already off, just return */
1105 /* Disable compression */
1106 fbc_ctl = I915_READ(FBC_CONTROL);
1107 fbc_ctl &= ~FBC_CTL_EN;
1108 I915_WRITE(FBC_CONTROL, fbc_ctl);
1110 /* Wait for compressing bit to clear */
1111 if (wait_for((I915_READ(FBC_STATUS) & FBC_STAT_COMPRESSING) == 0, 10, 0)) {
1112 DRM_DEBUG_KMS("FBC idle timed out\n");
1116 DRM_DEBUG_KMS("disabled FBC\n");
1119 static bool i8xx_fbc_enabled(struct drm_device *dev)
1121 struct drm_i915_private *dev_priv = dev->dev_private;
1123 return I915_READ(FBC_CONTROL) & FBC_CTL_EN;
1126 static void g4x_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
1128 struct drm_device *dev = crtc->dev;
1129 struct drm_i915_private *dev_priv = dev->dev_private;
1130 struct drm_framebuffer *fb = crtc->fb;
1131 struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
1132 struct drm_i915_gem_object *obj_priv = to_intel_bo(intel_fb->obj);
1133 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
1134 int plane = (intel_crtc->plane == 0 ? DPFC_CTL_PLANEA :
1136 unsigned long stall_watermark = 200;
1139 dev_priv->cfb_pitch = (dev_priv->cfb_pitch / 64) - 1;
1140 dev_priv->cfb_fence = obj_priv->fence_reg;
1141 dev_priv->cfb_plane = intel_crtc->plane;
1143 dpfc_ctl = plane | DPFC_SR_EN | DPFC_CTL_LIMIT_1X;
1144 if (obj_priv->tiling_mode != I915_TILING_NONE) {
1145 dpfc_ctl |= DPFC_CTL_FENCE_EN | dev_priv->cfb_fence;
1146 I915_WRITE(DPFC_CHICKEN, DPFC_HT_MODIFY);
1148 I915_WRITE(DPFC_CHICKEN, ~DPFC_HT_MODIFY);
1151 I915_WRITE(DPFC_CONTROL, dpfc_ctl);
1152 I915_WRITE(DPFC_RECOMP_CTL, DPFC_RECOMP_STALL_EN |
1153 (stall_watermark << DPFC_RECOMP_STALL_WM_SHIFT) |
1154 (interval << DPFC_RECOMP_TIMER_COUNT_SHIFT));
1155 I915_WRITE(DPFC_FENCE_YOFF, crtc->y);
1158 I915_WRITE(DPFC_CONTROL, I915_READ(DPFC_CONTROL) | DPFC_CTL_EN);
1160 DRM_DEBUG_KMS("enabled fbc on plane %d\n", intel_crtc->plane);
1163 void g4x_disable_fbc(struct drm_device *dev)
1165 struct drm_i915_private *dev_priv = dev->dev_private;
1168 /* Disable compression */
1169 dpfc_ctl = I915_READ(DPFC_CONTROL);
1170 dpfc_ctl &= ~DPFC_CTL_EN;
1171 I915_WRITE(DPFC_CONTROL, dpfc_ctl);
1173 DRM_DEBUG_KMS("disabled FBC\n");
1176 static bool g4x_fbc_enabled(struct drm_device *dev)
1178 struct drm_i915_private *dev_priv = dev->dev_private;
1180 return I915_READ(DPFC_CONTROL) & DPFC_CTL_EN;
1183 static void ironlake_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
1185 struct drm_device *dev = crtc->dev;
1186 struct drm_i915_private *dev_priv = dev->dev_private;
1187 struct drm_framebuffer *fb = crtc->fb;
1188 struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
1189 struct drm_i915_gem_object *obj_priv = to_intel_bo(intel_fb->obj);
1190 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
1191 int plane = (intel_crtc->plane == 0) ? DPFC_CTL_PLANEA :
1193 unsigned long stall_watermark = 200;
1196 dev_priv->cfb_pitch = (dev_priv->cfb_pitch / 64) - 1;
1197 dev_priv->cfb_fence = obj_priv->fence_reg;
1198 dev_priv->cfb_plane = intel_crtc->plane;
1200 dpfc_ctl = I915_READ(ILK_DPFC_CONTROL);
1201 dpfc_ctl &= DPFC_RESERVED;
1202 dpfc_ctl |= (plane | DPFC_CTL_LIMIT_1X);
1203 if (obj_priv->tiling_mode != I915_TILING_NONE) {
1204 dpfc_ctl |= (DPFC_CTL_FENCE_EN | dev_priv->cfb_fence);
1205 I915_WRITE(ILK_DPFC_CHICKEN, DPFC_HT_MODIFY);
1207 I915_WRITE(ILK_DPFC_CHICKEN, ~DPFC_HT_MODIFY);
1210 I915_WRITE(ILK_DPFC_CONTROL, dpfc_ctl);
1211 I915_WRITE(ILK_DPFC_RECOMP_CTL, DPFC_RECOMP_STALL_EN |
1212 (stall_watermark << DPFC_RECOMP_STALL_WM_SHIFT) |
1213 (interval << DPFC_RECOMP_TIMER_COUNT_SHIFT));
1214 I915_WRITE(ILK_DPFC_FENCE_YOFF, crtc->y);
1215 I915_WRITE(ILK_FBC_RT_BASE, obj_priv->gtt_offset | ILK_FBC_RT_VALID);
1217 I915_WRITE(ILK_DPFC_CONTROL, I915_READ(ILK_DPFC_CONTROL) |
1220 DRM_DEBUG_KMS("enabled fbc on plane %d\n", intel_crtc->plane);
1223 void ironlake_disable_fbc(struct drm_device *dev)
1225 struct drm_i915_private *dev_priv = dev->dev_private;
1228 /* Disable compression */
1229 dpfc_ctl = I915_READ(ILK_DPFC_CONTROL);
1230 dpfc_ctl &= ~DPFC_CTL_EN;
1231 I915_WRITE(ILK_DPFC_CONTROL, dpfc_ctl);
1233 DRM_DEBUG_KMS("disabled FBC\n");
1236 static bool ironlake_fbc_enabled(struct drm_device *dev)
1238 struct drm_i915_private *dev_priv = dev->dev_private;
1240 return I915_READ(ILK_DPFC_CONTROL) & DPFC_CTL_EN;
1243 bool intel_fbc_enabled(struct drm_device *dev)
1245 struct drm_i915_private *dev_priv = dev->dev_private;
1247 if (!dev_priv->display.fbc_enabled)
1250 return dev_priv->display.fbc_enabled(dev);
1253 void intel_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
1255 struct drm_i915_private *dev_priv = crtc->dev->dev_private;
1257 if (!dev_priv->display.enable_fbc)
1260 dev_priv->display.enable_fbc(crtc, interval);
1263 void intel_disable_fbc(struct drm_device *dev)
1265 struct drm_i915_private *dev_priv = dev->dev_private;
1267 if (!dev_priv->display.disable_fbc)
1270 dev_priv->display.disable_fbc(dev);
1274 * intel_update_fbc - enable/disable FBC as needed
1275 * @crtc: CRTC to point the compressor at
1276 * @mode: mode in use
1278 * Set up the framebuffer compression hardware at mode set time. We
1279 * enable it if possible:
1280 * - plane A only (on pre-965)
1281 * - no pixel mulitply/line duplication
1282 * - no alpha buffer discard
1284 * - framebuffer <= 2048 in width, 1536 in height
1286 * We can't assume that any compression will take place (worst case),
1287 * so the compressed buffer has to be the same size as the uncompressed
1288 * one. It also must reside (along with the line length buffer) in
1291 * We need to enable/disable FBC on a global basis.
1293 static void intel_update_fbc(struct drm_crtc *crtc,
1294 struct drm_display_mode *mode)
1296 struct drm_device *dev = crtc->dev;
1297 struct drm_i915_private *dev_priv = dev->dev_private;
1298 struct drm_framebuffer *fb = crtc->fb;
1299 struct intel_framebuffer *intel_fb;
1300 struct drm_i915_gem_object *obj_priv;
1301 struct drm_crtc *tmp_crtc;
1302 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
1303 int plane = intel_crtc->plane;
1304 int crtcs_enabled = 0;
1306 DRM_DEBUG_KMS("\n");
1308 if (!i915_powersave)
1311 if (!I915_HAS_FBC(dev))
1317 intel_fb = to_intel_framebuffer(fb);
1318 obj_priv = to_intel_bo(intel_fb->obj);
1321 * If FBC is already on, we just have to verify that we can
1322 * keep it that way...
1323 * Need to disable if:
1324 * - more than one pipe is active
1325 * - changing FBC params (stride, fence, mode)
1326 * - new fb is too large to fit in compressed buffer
1327 * - going to an unsupported config (interlace, pixel multiply, etc.)
1329 list_for_each_entry(tmp_crtc, &dev->mode_config.crtc_list, head) {
1330 if (tmp_crtc->enabled)
1333 DRM_DEBUG_KMS("%d pipes active\n", crtcs_enabled);
1334 if (crtcs_enabled > 1) {
1335 DRM_DEBUG_KMS("more than one pipe active, disabling compression\n");
1336 dev_priv->no_fbc_reason = FBC_MULTIPLE_PIPES;
1339 if (intel_fb->obj->size > dev_priv->cfb_size) {
1340 DRM_DEBUG_KMS("framebuffer too large, disabling "
1342 dev_priv->no_fbc_reason = FBC_STOLEN_TOO_SMALL;
1345 if ((mode->flags & DRM_MODE_FLAG_INTERLACE) ||
1346 (mode->flags & DRM_MODE_FLAG_DBLSCAN)) {
1347 DRM_DEBUG_KMS("mode incompatible with compression, "
1349 dev_priv->no_fbc_reason = FBC_UNSUPPORTED_MODE;
1352 if ((mode->hdisplay > 2048) ||
1353 (mode->vdisplay > 1536)) {
1354 DRM_DEBUG_KMS("mode too large for compression, disabling\n");
1355 dev_priv->no_fbc_reason = FBC_MODE_TOO_LARGE;
1358 if ((IS_I915GM(dev) || IS_I945GM(dev)) && plane != 0) {
1359 DRM_DEBUG_KMS("plane not 0, disabling compression\n");
1360 dev_priv->no_fbc_reason = FBC_BAD_PLANE;
1363 if (obj_priv->tiling_mode != I915_TILING_X) {
1364 DRM_DEBUG_KMS("framebuffer not tiled, disabling compression\n");
1365 dev_priv->no_fbc_reason = FBC_NOT_TILED;
1369 /* If the kernel debugger is active, always disable compression */
1370 if (in_dbg_master())
1373 if (intel_fbc_enabled(dev)) {
1374 /* We can re-enable it in this case, but need to update pitch */
1375 if ((fb->pitch > dev_priv->cfb_pitch) ||
1376 (obj_priv->fence_reg != dev_priv->cfb_fence) ||
1377 (plane != dev_priv->cfb_plane))
1378 intel_disable_fbc(dev);
1381 /* Now try to turn it back on if possible */
1382 if (!intel_fbc_enabled(dev))
1383 intel_enable_fbc(crtc, 500);
1388 /* Multiple disables should be harmless */
1389 if (intel_fbc_enabled(dev)) {
1390 DRM_DEBUG_KMS("unsupported config, disabling FBC\n");
1391 intel_disable_fbc(dev);
1396 intel_pin_and_fence_fb_obj(struct drm_device *dev, struct drm_gem_object *obj)
1398 struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
1402 switch (obj_priv->tiling_mode) {
1403 case I915_TILING_NONE:
1404 if (IS_BROADWATER(dev) || IS_CRESTLINE(dev))
1405 alignment = 128 * 1024;
1406 else if (IS_I965G(dev))
1407 alignment = 4 * 1024;
1409 alignment = 64 * 1024;
1412 /* pin() will align the object as required by fence */
1416 /* FIXME: Is this true? */
1417 DRM_ERROR("Y tiled not allowed for scan out buffers\n");
1423 ret = i915_gem_object_pin(obj, alignment);
1427 /* Install a fence for tiled scan-out. Pre-i965 always needs a
1428 * fence, whereas 965+ only requires a fence if using
1429 * framebuffer compression. For simplicity, we always install
1430 * a fence as the cost is not that onerous.
1432 if (obj_priv->fence_reg == I915_FENCE_REG_NONE &&
1433 obj_priv->tiling_mode != I915_TILING_NONE) {
1434 ret = i915_gem_object_get_fence_reg(obj);
1436 i915_gem_object_unpin(obj);
1444 /* Assume fb object is pinned & idle & fenced and just update base pointers */
1446 intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb,
1449 struct drm_device *dev = crtc->dev;
1450 struct drm_i915_private *dev_priv = dev->dev_private;
1451 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
1452 struct intel_framebuffer *intel_fb;
1453 struct drm_i915_gem_object *obj_priv;
1454 struct drm_gem_object *obj;
1455 int plane = intel_crtc->plane;
1456 unsigned long Start, Offset;
1457 int dspbase = (plane == 0 ? DSPAADDR : DSPBADDR);
1458 int dspsurf = (plane == 0 ? DSPASURF : DSPBSURF);
1459 int dspstride = (plane == 0) ? DSPASTRIDE : DSPBSTRIDE;
1460 int dsptileoff = (plane == 0 ? DSPATILEOFF : DSPBTILEOFF);
1461 int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR;
1469 DRM_ERROR("Can't update plane %d in SAREA\n", plane);
1473 intel_fb = to_intel_framebuffer(fb);
1474 obj = intel_fb->obj;
1475 obj_priv = to_intel_bo(obj);
1477 dspcntr = I915_READ(dspcntr_reg);
1478 /* Mask out pixel format bits in case we change it */
1479 dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
1480 switch (fb->bits_per_pixel) {
1482 dspcntr |= DISPPLANE_8BPP;
1485 if (fb->depth == 15)
1486 dspcntr |= DISPPLANE_15_16BPP;
1488 dspcntr |= DISPPLANE_16BPP;
1492 dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
1495 DRM_ERROR("Unknown color depth\n");
1498 if (IS_I965G(dev)) {
1499 if (obj_priv->tiling_mode != I915_TILING_NONE)
1500 dspcntr |= DISPPLANE_TILED;
1502 dspcntr &= ~DISPPLANE_TILED;
1505 if (HAS_PCH_SPLIT(dev))
1507 dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
1509 I915_WRITE(dspcntr_reg, dspcntr);
1511 Start = obj_priv->gtt_offset;
1512 Offset = y * fb->pitch + x * (fb->bits_per_pixel / 8);
1514 DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
1515 Start, Offset, x, y, fb->pitch);
1516 I915_WRITE(dspstride, fb->pitch);
1517 if (IS_I965G(dev)) {
1518 I915_WRITE(dspsurf, Start);
1519 I915_WRITE(dsptileoff, (y << 16) | x);
1520 I915_WRITE(dspbase, Offset);
1522 I915_WRITE(dspbase, Start + Offset);
1524 POSTING_READ(dspbase);
1526 if (IS_I965G(dev) || plane == 0)
1527 intel_update_fbc(crtc, &crtc->mode);
1529 intel_wait_for_vblank(dev, intel_crtc->pipe);
1530 intel_increase_pllclock(crtc, true);
1536 intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
1537 struct drm_framebuffer *old_fb)
1539 struct drm_device *dev = crtc->dev;
1540 struct drm_i915_master_private *master_priv;
1541 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
1542 struct intel_framebuffer *intel_fb;
1543 struct drm_i915_gem_object *obj_priv;
1544 struct drm_gem_object *obj;
1545 int pipe = intel_crtc->pipe;
1546 int plane = intel_crtc->plane;
1551 DRM_DEBUG_KMS("No FB bound\n");
1560 DRM_ERROR("Can't update plane %d in SAREA\n", plane);
1564 intel_fb = to_intel_framebuffer(crtc->fb);
1565 obj = intel_fb->obj;
1566 obj_priv = to_intel_bo(obj);
1568 mutex_lock(&dev->struct_mutex);
1569 ret = intel_pin_and_fence_fb_obj(dev, obj);
1571 mutex_unlock(&dev->struct_mutex);
1575 ret = i915_gem_object_set_to_display_plane(obj);
1577 i915_gem_object_unpin(obj);
1578 mutex_unlock(&dev->struct_mutex);
1582 ret = intel_pipe_set_base_atomic(crtc, crtc->fb, x, y);
1584 i915_gem_object_unpin(obj);
1585 mutex_unlock(&dev->struct_mutex);
1590 intel_fb = to_intel_framebuffer(old_fb);
1591 obj_priv = to_intel_bo(intel_fb->obj);
1592 i915_gem_object_unpin(intel_fb->obj);
1595 mutex_unlock(&dev->struct_mutex);
1597 if (!dev->primary->master)
1600 master_priv = dev->primary->master->driver_priv;
1601 if (!master_priv->sarea_priv)
1605 master_priv->sarea_priv->pipeB_x = x;
1606 master_priv->sarea_priv->pipeB_y = y;
1608 master_priv->sarea_priv->pipeA_x = x;
1609 master_priv->sarea_priv->pipeA_y = y;
1615 static void ironlake_set_pll_edp (struct drm_crtc *crtc, int clock)
1617 struct drm_device *dev = crtc->dev;
1618 struct drm_i915_private *dev_priv = dev->dev_private;
1621 DRM_DEBUG_KMS("eDP PLL enable for clock %d\n", clock);
1622 dpa_ctl = I915_READ(DP_A);
1623 dpa_ctl &= ~DP_PLL_FREQ_MASK;
1625 if (clock < 200000) {
1627 dpa_ctl |= DP_PLL_FREQ_160MHZ;
1628 /* workaround for 160Mhz:
1629 1) program 0x4600c bits 15:0 = 0x8124
1630 2) program 0x46010 bit 0 = 1
1631 3) program 0x46034 bit 24 = 1
1632 4) program 0x64000 bit 14 = 1
1634 temp = I915_READ(0x4600c);
1636 I915_WRITE(0x4600c, temp | 0x8124);
1638 temp = I915_READ(0x46010);
1639 I915_WRITE(0x46010, temp | 1);
1641 temp = I915_READ(0x46034);
1642 I915_WRITE(0x46034, temp | (1 << 24));
1644 dpa_ctl |= DP_PLL_FREQ_270MHZ;
1646 I915_WRITE(DP_A, dpa_ctl);
1651 /* The FDI link training functions for ILK/Ibexpeak. */
1652 static void ironlake_fdi_link_train(struct drm_crtc *crtc)
1654 struct drm_device *dev = crtc->dev;
1655 struct drm_i915_private *dev_priv = dev->dev_private;
1656 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
1657 int pipe = intel_crtc->pipe;
1658 int fdi_tx_reg = (pipe == 0) ? FDI_TXA_CTL : FDI_TXB_CTL;
1659 int fdi_rx_reg = (pipe == 0) ? FDI_RXA_CTL : FDI_RXB_CTL;
1660 int fdi_rx_iir_reg = (pipe == 0) ? FDI_RXA_IIR : FDI_RXB_IIR;
1661 int fdi_rx_imr_reg = (pipe == 0) ? FDI_RXA_IMR : FDI_RXB_IMR;
1662 u32 temp, tries = 0;
1664 /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
1666 temp = I915_READ(fdi_rx_imr_reg);
1667 temp &= ~FDI_RX_SYMBOL_LOCK;
1668 temp &= ~FDI_RX_BIT_LOCK;
1669 I915_WRITE(fdi_rx_imr_reg, temp);
1670 I915_READ(fdi_rx_imr_reg);
1673 /* enable CPU FDI TX and PCH FDI RX */
1674 temp = I915_READ(fdi_tx_reg);
1675 temp |= FDI_TX_ENABLE;
1677 temp |= (intel_crtc->fdi_lanes - 1) << 19;
1678 temp &= ~FDI_LINK_TRAIN_NONE;
1679 temp |= FDI_LINK_TRAIN_PATTERN_1;
1680 I915_WRITE(fdi_tx_reg, temp);
1681 I915_READ(fdi_tx_reg);
1683 temp = I915_READ(fdi_rx_reg);
1684 temp &= ~FDI_LINK_TRAIN_NONE;
1685 temp |= FDI_LINK_TRAIN_PATTERN_1;
1686 I915_WRITE(fdi_rx_reg, temp | FDI_RX_ENABLE);
1687 I915_READ(fdi_rx_reg);
1690 for (tries = 0; tries < 5; tries++) {
1691 temp = I915_READ(fdi_rx_iir_reg);
1692 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
1694 if ((temp & FDI_RX_BIT_LOCK)) {
1695 DRM_DEBUG_KMS("FDI train 1 done.\n");
1696 I915_WRITE(fdi_rx_iir_reg,
1697 temp | FDI_RX_BIT_LOCK);
1702 DRM_DEBUG_KMS("FDI train 1 fail!\n");
1705 temp = I915_READ(fdi_tx_reg);
1706 temp &= ~FDI_LINK_TRAIN_NONE;
1707 temp |= FDI_LINK_TRAIN_PATTERN_2;
1708 I915_WRITE(fdi_tx_reg, temp);
1710 temp = I915_READ(fdi_rx_reg);
1711 temp &= ~FDI_LINK_TRAIN_NONE;
1712 temp |= FDI_LINK_TRAIN_PATTERN_2;
1713 I915_WRITE(fdi_rx_reg, temp);
1718 for (tries = 0; tries < 5; tries++) {
1719 temp = I915_READ(fdi_rx_iir_reg);
1720 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
1722 if (temp & FDI_RX_SYMBOL_LOCK) {
1723 I915_WRITE(fdi_rx_iir_reg,
1724 temp | FDI_RX_SYMBOL_LOCK);
1725 DRM_DEBUG_KMS("FDI train 2 done.\n");
1730 DRM_DEBUG_KMS("FDI train 2 fail!\n");
1732 DRM_DEBUG_KMS("FDI train done\n");
1735 static int snb_b_fdi_train_param [] = {
1736 FDI_LINK_TRAIN_400MV_0DB_SNB_B,
1737 FDI_LINK_TRAIN_400MV_6DB_SNB_B,
1738 FDI_LINK_TRAIN_600MV_3_5DB_SNB_B,
1739 FDI_LINK_TRAIN_800MV_0DB_SNB_B,
1742 /* The FDI link training functions for SNB/Cougarpoint. */
1743 static void gen6_fdi_link_train(struct drm_crtc *crtc)
1745 struct drm_device *dev = crtc->dev;
1746 struct drm_i915_private *dev_priv = dev->dev_private;
1747 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
1748 int pipe = intel_crtc->pipe;
1749 int fdi_tx_reg = (pipe == 0) ? FDI_TXA_CTL : FDI_TXB_CTL;
1750 int fdi_rx_reg = (pipe == 0) ? FDI_RXA_CTL : FDI_RXB_CTL;
1751 int fdi_rx_iir_reg = (pipe == 0) ? FDI_RXA_IIR : FDI_RXB_IIR;
1752 int fdi_rx_imr_reg = (pipe == 0) ? FDI_RXA_IMR : FDI_RXB_IMR;
1755 /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
1757 temp = I915_READ(fdi_rx_imr_reg);
1758 temp &= ~FDI_RX_SYMBOL_LOCK;
1759 temp &= ~FDI_RX_BIT_LOCK;
1760 I915_WRITE(fdi_rx_imr_reg, temp);
1761 I915_READ(fdi_rx_imr_reg);
1764 /* enable CPU FDI TX and PCH FDI RX */
1765 temp = I915_READ(fdi_tx_reg);
1766 temp |= FDI_TX_ENABLE;
1768 temp |= (intel_crtc->fdi_lanes - 1) << 19;
1769 temp &= ~FDI_LINK_TRAIN_NONE;
1770 temp |= FDI_LINK_TRAIN_PATTERN_1;
1771 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
1773 temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
1774 I915_WRITE(fdi_tx_reg, temp);
1775 I915_READ(fdi_tx_reg);
1777 temp = I915_READ(fdi_rx_reg);
1778 if (HAS_PCH_CPT(dev)) {
1779 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
1780 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
1782 temp &= ~FDI_LINK_TRAIN_NONE;
1783 temp |= FDI_LINK_TRAIN_PATTERN_1;
1785 I915_WRITE(fdi_rx_reg, temp | FDI_RX_ENABLE);
1786 I915_READ(fdi_rx_reg);
1789 for (i = 0; i < 4; i++ ) {
1790 temp = I915_READ(fdi_tx_reg);
1791 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
1792 temp |= snb_b_fdi_train_param[i];
1793 I915_WRITE(fdi_tx_reg, temp);
1796 temp = I915_READ(fdi_rx_iir_reg);
1797 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
1799 if (temp & FDI_RX_BIT_LOCK) {
1800 I915_WRITE(fdi_rx_iir_reg,
1801 temp | FDI_RX_BIT_LOCK);
1802 DRM_DEBUG_KMS("FDI train 1 done.\n");
1807 DRM_DEBUG_KMS("FDI train 1 fail!\n");
1810 temp = I915_READ(fdi_tx_reg);
1811 temp &= ~FDI_LINK_TRAIN_NONE;
1812 temp |= FDI_LINK_TRAIN_PATTERN_2;
1814 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
1816 temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
1818 I915_WRITE(fdi_tx_reg, temp);
1820 temp = I915_READ(fdi_rx_reg);
1821 if (HAS_PCH_CPT(dev)) {
1822 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
1823 temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
1825 temp &= ~FDI_LINK_TRAIN_NONE;
1826 temp |= FDI_LINK_TRAIN_PATTERN_2;
1828 I915_WRITE(fdi_rx_reg, temp);
1831 for (i = 0; i < 4; i++ ) {
1832 temp = I915_READ(fdi_tx_reg);
1833 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
1834 temp |= snb_b_fdi_train_param[i];
1835 I915_WRITE(fdi_tx_reg, temp);
1838 temp = I915_READ(fdi_rx_iir_reg);
1839 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
1841 if (temp & FDI_RX_SYMBOL_LOCK) {
1842 I915_WRITE(fdi_rx_iir_reg,
1843 temp | FDI_RX_SYMBOL_LOCK);
1844 DRM_DEBUG_KMS("FDI train 2 done.\n");
1849 DRM_DEBUG_KMS("FDI train 2 fail!\n");
1851 DRM_DEBUG_KMS("FDI train done.\n");
1854 static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
1856 struct drm_device *dev = crtc->dev;
1857 struct drm_i915_private *dev_priv = dev->dev_private;
1858 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
1859 int pipe = intel_crtc->pipe;
1860 int plane = intel_crtc->plane;
1861 int pch_dpll_reg = (pipe == 0) ? PCH_DPLL_A : PCH_DPLL_B;
1862 int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
1863 int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR;
1864 int dspbase_reg = (plane == 0) ? DSPAADDR : DSPBADDR;
1865 int fdi_tx_reg = (pipe == 0) ? FDI_TXA_CTL : FDI_TXB_CTL;
1866 int fdi_rx_reg = (pipe == 0) ? FDI_RXA_CTL : FDI_RXB_CTL;
1867 int transconf_reg = (pipe == 0) ? TRANSACONF : TRANSBCONF;
1868 int pf_ctl_reg = (pipe == 0) ? PFA_CTL_1 : PFB_CTL_1;
1869 int pf_win_size = (pipe == 0) ? PFA_WIN_SZ : PFB_WIN_SZ;
1870 int pf_win_pos = (pipe == 0) ? PFA_WIN_POS : PFB_WIN_POS;
1871 int cpu_htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B;
1872 int cpu_hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B;
1873 int cpu_hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B;
1874 int cpu_vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B;
1875 int cpu_vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B;
1876 int cpu_vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B;
1877 int trans_htot_reg = (pipe == 0) ? TRANS_HTOTAL_A : TRANS_HTOTAL_B;
1878 int trans_hblank_reg = (pipe == 0) ? TRANS_HBLANK_A : TRANS_HBLANK_B;
1879 int trans_hsync_reg = (pipe == 0) ? TRANS_HSYNC_A : TRANS_HSYNC_B;
1880 int trans_vtot_reg = (pipe == 0) ? TRANS_VTOTAL_A : TRANS_VTOTAL_B;
1881 int trans_vblank_reg = (pipe == 0) ? TRANS_VBLANK_A : TRANS_VBLANK_B;
1882 int trans_vsync_reg = (pipe == 0) ? TRANS_VSYNC_A : TRANS_VSYNC_B;
1883 int trans_dpll_sel = (pipe == 0) ? 0 : 1;
1887 temp = I915_READ(pipeconf_reg);
1888 pipe_bpc = temp & PIPE_BPC_MASK;
1890 /* XXX: When our outputs are all unaware of DPMS modes other than off
1891 * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
1894 case DRM_MODE_DPMS_ON:
1895 case DRM_MODE_DPMS_STANDBY:
1896 case DRM_MODE_DPMS_SUSPEND:
1897 DRM_DEBUG_KMS("crtc %d/%d dpms on\n", pipe, plane);
1899 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
1900 temp = I915_READ(PCH_LVDS);
1901 if ((temp & LVDS_PORT_EN) == 0) {
1902 I915_WRITE(PCH_LVDS, temp | LVDS_PORT_EN);
1903 POSTING_READ(PCH_LVDS);
1909 /* enable PCH FDI RX PLL, wait warmup plus DMI latency */
1910 temp = I915_READ(fdi_rx_reg);
1912 * make the BPC in FDI Rx be consistent with that in
1915 temp &= ~(0x7 << 16);
1916 temp |= (pipe_bpc << 11);
1918 temp |= (intel_crtc->fdi_lanes - 1) << 19;
1919 I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE);
1920 I915_READ(fdi_rx_reg);
1923 /* Switch from Rawclk to PCDclk */
1924 temp = I915_READ(fdi_rx_reg);
1925 I915_WRITE(fdi_rx_reg, temp | FDI_SEL_PCDCLK);
1926 I915_READ(fdi_rx_reg);
1929 /* Enable CPU FDI TX PLL, always on for Ironlake */
1930 temp = I915_READ(fdi_tx_reg);
1931 if ((temp & FDI_TX_PLL_ENABLE) == 0) {
1932 I915_WRITE(fdi_tx_reg, temp | FDI_TX_PLL_ENABLE);
1933 I915_READ(fdi_tx_reg);
1938 /* Enable panel fitting for LVDS */
1939 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)
1940 || HAS_eDP || intel_pch_has_edp(crtc)) {
1941 if (dev_priv->pch_pf_size) {
1942 temp = I915_READ(pf_ctl_reg);
1943 I915_WRITE(pf_ctl_reg, temp | PF_ENABLE | PF_FILTER_MED_3x3);
1944 I915_WRITE(pf_win_pos, dev_priv->pch_pf_pos);
1945 I915_WRITE(pf_win_size, dev_priv->pch_pf_size);
1947 I915_WRITE(pf_ctl_reg, temp & ~PF_ENABLE);
1950 /* Enable CPU pipe */
1951 temp = I915_READ(pipeconf_reg);
1952 if ((temp & PIPEACONF_ENABLE) == 0) {
1953 I915_WRITE(pipeconf_reg, temp | PIPEACONF_ENABLE);
1954 I915_READ(pipeconf_reg);
1958 /* configure and enable CPU plane */
1959 temp = I915_READ(dspcntr_reg);
1960 if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
1961 I915_WRITE(dspcntr_reg, temp | DISPLAY_PLANE_ENABLE);
1962 /* Flush the plane changes */
1963 I915_WRITE(dspbase_reg, I915_READ(dspbase_reg));
1967 /* For PCH output, training FDI link */
1969 gen6_fdi_link_train(crtc);
1971 ironlake_fdi_link_train(crtc);
1973 /* enable PCH DPLL */
1974 temp = I915_READ(pch_dpll_reg);
1975 if ((temp & DPLL_VCO_ENABLE) == 0) {
1976 I915_WRITE(pch_dpll_reg, temp | DPLL_VCO_ENABLE);
1977 I915_READ(pch_dpll_reg);
1981 if (HAS_PCH_CPT(dev)) {
1982 /* Be sure PCH DPLL SEL is set */
1983 temp = I915_READ(PCH_DPLL_SEL);
1984 if (trans_dpll_sel == 0 &&
1985 (temp & TRANSA_DPLL_ENABLE) == 0)
1986 temp |= (TRANSA_DPLL_ENABLE | TRANSA_DPLLA_SEL);
1987 else if (trans_dpll_sel == 1 &&
1988 (temp & TRANSB_DPLL_ENABLE) == 0)
1989 temp |= (TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL);
1990 I915_WRITE(PCH_DPLL_SEL, temp);
1991 I915_READ(PCH_DPLL_SEL);
1994 /* set transcoder timing */
1995 I915_WRITE(trans_htot_reg, I915_READ(cpu_htot_reg));
1996 I915_WRITE(trans_hblank_reg, I915_READ(cpu_hblank_reg));
1997 I915_WRITE(trans_hsync_reg, I915_READ(cpu_hsync_reg));
1999 I915_WRITE(trans_vtot_reg, I915_READ(cpu_vtot_reg));
2000 I915_WRITE(trans_vblank_reg, I915_READ(cpu_vblank_reg));
2001 I915_WRITE(trans_vsync_reg, I915_READ(cpu_vsync_reg));
2003 /* enable normal train */
2004 temp = I915_READ(fdi_tx_reg);
2005 temp &= ~FDI_LINK_TRAIN_NONE;
2006 I915_WRITE(fdi_tx_reg, temp | FDI_LINK_TRAIN_NONE |
2007 FDI_TX_ENHANCE_FRAME_ENABLE);
2008 I915_READ(fdi_tx_reg);
2010 temp = I915_READ(fdi_rx_reg);
2011 if (HAS_PCH_CPT(dev)) {
2012 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2013 temp |= FDI_LINK_TRAIN_NORMAL_CPT;
2015 temp &= ~FDI_LINK_TRAIN_NONE;
2016 temp |= FDI_LINK_TRAIN_NONE;
2018 I915_WRITE(fdi_rx_reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE);
2019 I915_READ(fdi_rx_reg);
2021 /* wait one idle pattern time */
2024 /* For PCH DP, enable TRANS_DP_CTL */
2025 if (HAS_PCH_CPT(dev) &&
2026 intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
2027 int trans_dp_ctl = (pipe == 0) ? TRANS_DP_CTL_A : TRANS_DP_CTL_B;
2030 reg = I915_READ(trans_dp_ctl);
2031 reg &= ~(TRANS_DP_PORT_SEL_MASK |
2032 TRANS_DP_SYNC_MASK);
2033 reg |= (TRANS_DP_OUTPUT_ENABLE |
2034 TRANS_DP_ENH_FRAMING);
2036 if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC)
2037 reg |= TRANS_DP_HSYNC_ACTIVE_HIGH;
2038 if (crtc->mode.flags & DRM_MODE_FLAG_PVSYNC)
2039 reg |= TRANS_DP_VSYNC_ACTIVE_HIGH;
2041 switch (intel_trans_dp_port_sel(crtc)) {
2043 reg |= TRANS_DP_PORT_SEL_B;
2046 reg |= TRANS_DP_PORT_SEL_C;
2049 reg |= TRANS_DP_PORT_SEL_D;
2052 DRM_DEBUG_KMS("Wrong PCH DP port return. Guess port B\n");
2053 reg |= TRANS_DP_PORT_SEL_B;
2057 I915_WRITE(trans_dp_ctl, reg);
2058 POSTING_READ(trans_dp_ctl);
2061 /* enable PCH transcoder */
2062 temp = I915_READ(transconf_reg);
2064 * make the BPC in transcoder be consistent with
2065 * that in pipeconf reg.
2067 temp &= ~PIPE_BPC_MASK;
2069 I915_WRITE(transconf_reg, temp | TRANS_ENABLE);
2070 I915_READ(transconf_reg);
2072 if (wait_for(I915_READ(transconf_reg) & TRANS_STATE_ENABLE, 10, 0))
2073 DRM_ERROR("failed to enable transcoder\n");
2076 intel_crtc_load_lut(crtc);
2078 intel_update_fbc(crtc, &crtc->mode);
2081 case DRM_MODE_DPMS_OFF:
2082 DRM_DEBUG_KMS("crtc %d/%d dpms off\n", pipe, plane);
2084 drm_vblank_off(dev, pipe);
2085 /* Disable display plane */
2086 temp = I915_READ(dspcntr_reg);
2087 if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
2088 I915_WRITE(dspcntr_reg, temp & ~DISPLAY_PLANE_ENABLE);
2089 /* Flush the plane changes */
2090 I915_WRITE(dspbase_reg, I915_READ(dspbase_reg));
2091 I915_READ(dspbase_reg);
2094 if (dev_priv->cfb_plane == plane &&
2095 dev_priv->display.disable_fbc)
2096 dev_priv->display.disable_fbc(dev);
2098 /* disable cpu pipe, disable after all planes disabled */
2099 temp = I915_READ(pipeconf_reg);
2100 if ((temp & PIPEACONF_ENABLE) != 0) {
2101 I915_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE);
2103 /* wait for cpu pipe off, pipe state */
2104 if (wait_for((I915_READ(pipeconf_reg) & I965_PIPECONF_ACTIVE) == 0, 50, 1))
2105 DRM_ERROR("failed to turn off cpu pipe\n");
2107 DRM_DEBUG_KMS("crtc %d is disabled\n", pipe);
2112 temp = I915_READ(pf_ctl_reg);
2113 if ((temp & PF_ENABLE) != 0) {
2114 I915_WRITE(pf_ctl_reg, temp & ~PF_ENABLE);
2115 I915_READ(pf_ctl_reg);
2117 I915_WRITE(pf_win_size, 0);
2118 POSTING_READ(pf_win_size);
2121 /* disable CPU FDI tx and PCH FDI rx */
2122 temp = I915_READ(fdi_tx_reg);
2123 I915_WRITE(fdi_tx_reg, temp & ~FDI_TX_ENABLE);
2124 I915_READ(fdi_tx_reg);
2126 temp = I915_READ(fdi_rx_reg);
2127 /* BPC in FDI rx is consistent with that in pipeconf */
2128 temp &= ~(0x07 << 16);
2129 temp |= (pipe_bpc << 11);
2130 I915_WRITE(fdi_rx_reg, temp & ~FDI_RX_ENABLE);
2131 I915_READ(fdi_rx_reg);
2135 /* still set train pattern 1 */
2136 temp = I915_READ(fdi_tx_reg);
2137 temp &= ~FDI_LINK_TRAIN_NONE;
2138 temp |= FDI_LINK_TRAIN_PATTERN_1;
2139 I915_WRITE(fdi_tx_reg, temp);
2140 POSTING_READ(fdi_tx_reg);
2142 temp = I915_READ(fdi_rx_reg);
2143 if (HAS_PCH_CPT(dev)) {
2144 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2145 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
2147 temp &= ~FDI_LINK_TRAIN_NONE;
2148 temp |= FDI_LINK_TRAIN_PATTERN_1;
2150 I915_WRITE(fdi_rx_reg, temp);
2151 POSTING_READ(fdi_rx_reg);
2155 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
2156 temp = I915_READ(PCH_LVDS);
2157 I915_WRITE(PCH_LVDS, temp & ~LVDS_PORT_EN);
2158 I915_READ(PCH_LVDS);
2162 /* disable PCH transcoder */
2163 temp = I915_READ(transconf_reg);
2164 if ((temp & TRANS_ENABLE) != 0) {
2165 I915_WRITE(transconf_reg, temp & ~TRANS_ENABLE);
2167 /* wait for PCH transcoder off, transcoder state */
2168 if (wait_for((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) == 0, 50, 1))
2169 DRM_ERROR("failed to disable transcoder\n");
2172 temp = I915_READ(transconf_reg);
2173 /* BPC in transcoder is consistent with that in pipeconf */
2174 temp &= ~PIPE_BPC_MASK;
2176 I915_WRITE(transconf_reg, temp);
2177 I915_READ(transconf_reg);
2180 if (HAS_PCH_CPT(dev)) {
2181 /* disable TRANS_DP_CTL */
2182 int trans_dp_ctl = (pipe == 0) ? TRANS_DP_CTL_A : TRANS_DP_CTL_B;
2185 reg = I915_READ(trans_dp_ctl);
2186 reg &= ~(TRANS_DP_OUTPUT_ENABLE | TRANS_DP_PORT_SEL_MASK);
2187 I915_WRITE(trans_dp_ctl, reg);
2188 POSTING_READ(trans_dp_ctl);
2190 /* disable DPLL_SEL */
2191 temp = I915_READ(PCH_DPLL_SEL);
2192 if (trans_dpll_sel == 0)
2193 temp &= ~(TRANSA_DPLL_ENABLE | TRANSA_DPLLB_SEL);
2195 temp &= ~(TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL);
2196 I915_WRITE(PCH_DPLL_SEL, temp);
2197 I915_READ(PCH_DPLL_SEL);
2201 /* disable PCH DPLL */
2202 temp = I915_READ(pch_dpll_reg);
2203 I915_WRITE(pch_dpll_reg, temp & ~DPLL_VCO_ENABLE);
2204 I915_READ(pch_dpll_reg);
2206 /* Switch from PCDclk to Rawclk */
2207 temp = I915_READ(fdi_rx_reg);
2208 temp &= ~FDI_SEL_PCDCLK;
2209 I915_WRITE(fdi_rx_reg, temp);
2210 I915_READ(fdi_rx_reg);
2212 /* Disable CPU FDI TX PLL */
2213 temp = I915_READ(fdi_tx_reg);
2214 I915_WRITE(fdi_tx_reg, temp & ~FDI_TX_PLL_ENABLE);
2215 I915_READ(fdi_tx_reg);
2218 temp = I915_READ(fdi_rx_reg);
2219 temp &= ~FDI_RX_PLL_ENABLE;
2220 I915_WRITE(fdi_rx_reg, temp);
2221 I915_READ(fdi_rx_reg);
2223 /* Wait for the clocks to turn off. */
2229 static void intel_crtc_dpms_overlay(struct intel_crtc *intel_crtc, bool enable)
2231 struct intel_overlay *overlay;
2234 if (!enable && intel_crtc->overlay) {
2235 overlay = intel_crtc->overlay;
2236 mutex_lock(&overlay->dev->struct_mutex);
2238 ret = intel_overlay_switch_off(overlay);
2242 ret = intel_overlay_recover_from_interrupt(overlay, 0);
2244 /* overlay doesn't react anymore. Usually
2245 * results in a black screen and an unkillable
2248 overlay->hw_wedged = HW_WEDGED;
2252 mutex_unlock(&overlay->dev->struct_mutex);
2254 /* Let userspace switch the overlay on again. In most cases userspace
2255 * has to recompute where to put it anyway. */
2260 static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode)
2262 struct drm_device *dev = crtc->dev;
2263 struct drm_i915_private *dev_priv = dev->dev_private;
2264 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2265 int pipe = intel_crtc->pipe;
2266 int plane = intel_crtc->plane;
2267 int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
2268 int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR;
2269 int dspbase_reg = (plane == 0) ? DSPAADDR : DSPBADDR;
2270 int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
2273 /* XXX: When our outputs are all unaware of DPMS modes other than off
2274 * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
2277 case DRM_MODE_DPMS_ON:
2278 case DRM_MODE_DPMS_STANDBY:
2279 case DRM_MODE_DPMS_SUSPEND:
2280 /* Enable the DPLL */
2281 temp = I915_READ(dpll_reg);
2282 if ((temp & DPLL_VCO_ENABLE) == 0) {
2283 I915_WRITE(dpll_reg, temp);
2284 I915_READ(dpll_reg);
2285 /* Wait for the clocks to stabilize. */
2287 I915_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE);
2288 I915_READ(dpll_reg);
2289 /* Wait for the clocks to stabilize. */
2291 I915_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE);
2292 I915_READ(dpll_reg);
2293 /* Wait for the clocks to stabilize. */
2297 /* Enable the pipe */
2298 temp = I915_READ(pipeconf_reg);
2299 if ((temp & PIPEACONF_ENABLE) == 0)
2300 I915_WRITE(pipeconf_reg, temp | PIPEACONF_ENABLE);
2302 /* Enable the plane */
2303 temp = I915_READ(dspcntr_reg);
2304 if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
2305 I915_WRITE(dspcntr_reg, temp | DISPLAY_PLANE_ENABLE);
2306 /* Flush the plane changes */
2307 I915_WRITE(dspbase_reg, I915_READ(dspbase_reg));
2310 intel_crtc_load_lut(crtc);
2312 if ((IS_I965G(dev) || plane == 0))
2313 intel_update_fbc(crtc, &crtc->mode);
2315 /* Give the overlay scaler a chance to enable if it's on this pipe */
2316 intel_crtc_dpms_overlay(intel_crtc, true);
2318 case DRM_MODE_DPMS_OFF:
2319 /* Give the overlay scaler a chance to disable if it's on this pipe */
2320 intel_crtc_dpms_overlay(intel_crtc, false);
2321 drm_vblank_off(dev, pipe);
2323 if (dev_priv->cfb_plane == plane &&
2324 dev_priv->display.disable_fbc)
2325 dev_priv->display.disable_fbc(dev);
2327 /* Disable display plane */
2328 temp = I915_READ(dspcntr_reg);
2329 if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
2330 I915_WRITE(dspcntr_reg, temp & ~DISPLAY_PLANE_ENABLE);
2331 /* Flush the plane changes */
2332 I915_WRITE(dspbase_reg, I915_READ(dspbase_reg));
2333 I915_READ(dspbase_reg);
2336 /* Wait for vblank for the disable to take effect */
2337 intel_wait_for_vblank_off(dev, pipe);
2339 /* Don't disable pipe A or pipe A PLLs if needed */
2340 if (pipeconf_reg == PIPEACONF &&
2341 (dev_priv->quirks & QUIRK_PIPEA_FORCE))
2344 /* Next, disable display pipes */
2345 temp = I915_READ(pipeconf_reg);
2346 if ((temp & PIPEACONF_ENABLE) != 0) {
2347 I915_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE);
2348 I915_READ(pipeconf_reg);
2351 /* Wait for vblank for the disable to take effect. */
2352 intel_wait_for_vblank_off(dev, pipe);
2354 temp = I915_READ(dpll_reg);
2355 if ((temp & DPLL_VCO_ENABLE) != 0) {
2356 I915_WRITE(dpll_reg, temp & ~DPLL_VCO_ENABLE);
2357 I915_READ(dpll_reg);
2360 /* Wait for the clocks to turn off. */
2367 * Sets the power management mode of the pipe and plane.
2369 static void intel_crtc_dpms(struct drm_crtc *crtc, int mode)
2371 struct drm_device *dev = crtc->dev;
2372 struct drm_i915_private *dev_priv = dev->dev_private;
2373 struct drm_i915_master_private *master_priv;
2374 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2375 int pipe = intel_crtc->pipe;
2378 intel_crtc->dpms_mode = mode;
2379 intel_crtc->cursor_on = mode == DRM_MODE_DPMS_ON;
2381 /* When switching on the display, ensure that SR is disabled
2382 * with multiple pipes prior to enabling to new pipe.
2384 * When switching off the display, make sure the cursor is
2385 * properly hidden prior to disabling the pipe.
2387 if (mode == DRM_MODE_DPMS_ON)
2388 intel_update_watermarks(dev);
2390 intel_crtc_update_cursor(crtc);
2392 dev_priv->display.dpms(crtc, mode);
2394 if (mode == DRM_MODE_DPMS_ON)
2395 intel_crtc_update_cursor(crtc);
2397 intel_update_watermarks(dev);
2399 if (!dev->primary->master)
2402 master_priv = dev->primary->master->driver_priv;
2403 if (!master_priv->sarea_priv)
2406 enabled = crtc->enabled && mode != DRM_MODE_DPMS_OFF;
2410 master_priv->sarea_priv->pipeA_w = enabled ? crtc->mode.hdisplay : 0;
2411 master_priv->sarea_priv->pipeA_h = enabled ? crtc->mode.vdisplay : 0;
2414 master_priv->sarea_priv->pipeB_w = enabled ? crtc->mode.hdisplay : 0;
2415 master_priv->sarea_priv->pipeB_h = enabled ? crtc->mode.vdisplay : 0;
2418 DRM_ERROR("Can't update pipe %d in SAREA\n", pipe);
2423 static void intel_crtc_prepare (struct drm_crtc *crtc)
2425 struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
2426 crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
2429 static void intel_crtc_commit (struct drm_crtc *crtc)
2431 struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
2432 crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
2435 void intel_encoder_prepare (struct drm_encoder *encoder)
2437 struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
2438 /* lvds has its own version of prepare see intel_lvds_prepare */
2439 encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF);
2442 void intel_encoder_commit (struct drm_encoder *encoder)
2444 struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
2445 /* lvds has its own version of commit see intel_lvds_commit */
2446 encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);
2449 void intel_encoder_destroy(struct drm_encoder *encoder)
2451 struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
2453 if (intel_encoder->ddc_bus)
2454 intel_i2c_destroy(intel_encoder->ddc_bus);
2456 if (intel_encoder->i2c_bus)
2457 intel_i2c_destroy(intel_encoder->i2c_bus);
2459 drm_encoder_cleanup(encoder);
2460 kfree(intel_encoder);
2463 static bool intel_crtc_mode_fixup(struct drm_crtc *crtc,
2464 struct drm_display_mode *mode,
2465 struct drm_display_mode *adjusted_mode)
2467 struct drm_device *dev = crtc->dev;
2468 if (HAS_PCH_SPLIT(dev)) {
2469 /* FDI link clock is fixed at 2.7G */
2470 if (mode->clock * 3 > IRONLAKE_FDI_FREQ * 4)
2476 static int i945_get_display_clock_speed(struct drm_device *dev)
2481 static int i915_get_display_clock_speed(struct drm_device *dev)
2486 static int i9xx_misc_get_display_clock_speed(struct drm_device *dev)
2491 static int i915gm_get_display_clock_speed(struct drm_device *dev)
2495 pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
2497 if (gcfgc & GC_LOW_FREQUENCY_ENABLE)
2500 switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
2501 case GC_DISPLAY_CLOCK_333_MHZ:
2504 case GC_DISPLAY_CLOCK_190_200_MHZ:
2510 static int i865_get_display_clock_speed(struct drm_device *dev)
2515 static int i855_get_display_clock_speed(struct drm_device *dev)
2518 /* Assume that the hardware is in the high speed state. This
2519 * should be the default.
2521 switch (hpllcc & GC_CLOCK_CONTROL_MASK) {
2522 case GC_CLOCK_133_200:
2523 case GC_CLOCK_100_200:
2525 case GC_CLOCK_166_250:
2527 case GC_CLOCK_100_133:
2531 /* Shouldn't happen */
2535 static int i830_get_display_clock_speed(struct drm_device *dev)
2541 * Return the pipe currently connected to the panel fitter,
2542 * or -1 if the panel fitter is not present or not in use
2544 int intel_panel_fitter_pipe (struct drm_device *dev)
2546 struct drm_i915_private *dev_priv = dev->dev_private;
2549 /* i830 doesn't have a panel fitter */
2553 pfit_control = I915_READ(PFIT_CONTROL);
2555 /* See if the panel fitter is in use */
2556 if ((pfit_control & PFIT_ENABLE) == 0)
2559 /* 965 can place panel fitter on either pipe */
2561 return (pfit_control >> 29) & 0x3;
2563 /* older chips can only use pipe 1 */
2576 fdi_reduce_ratio(u32 *num, u32 *den)
2578 while (*num > 0xffffff || *den > 0xffffff) {
2584 #define DATA_N 0x800000
2585 #define LINK_N 0x80000
2588 ironlake_compute_m_n(int bits_per_pixel, int nlanes, int pixel_clock,
2589 int link_clock, struct fdi_m_n *m_n)
2593 m_n->tu = 64; /* default size */
2595 temp = (u64) DATA_N * pixel_clock;
2596 temp = div_u64(temp, link_clock);
2597 m_n->gmch_m = div_u64(temp * bits_per_pixel, nlanes);
2598 m_n->gmch_m >>= 3; /* convert to bytes_per_pixel */
2599 m_n->gmch_n = DATA_N;
2600 fdi_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
2602 temp = (u64) LINK_N * pixel_clock;
2603 m_n->link_m = div_u64(temp, link_clock);
2604 m_n->link_n = LINK_N;
2605 fdi_reduce_ratio(&m_n->link_m, &m_n->link_n);
2609 struct intel_watermark_params {
2610 unsigned long fifo_size;
2611 unsigned long max_wm;
2612 unsigned long default_wm;
2613 unsigned long guard_size;
2614 unsigned long cacheline_size;
2617 /* Pineview has different values for various configs */
2618 static struct intel_watermark_params pineview_display_wm = {
2619 PINEVIEW_DISPLAY_FIFO,
2623 PINEVIEW_FIFO_LINE_SIZE
2625 static struct intel_watermark_params pineview_display_hplloff_wm = {
2626 PINEVIEW_DISPLAY_FIFO,
2628 PINEVIEW_DFT_HPLLOFF_WM,
2630 PINEVIEW_FIFO_LINE_SIZE
2632 static struct intel_watermark_params pineview_cursor_wm = {
2633 PINEVIEW_CURSOR_FIFO,
2634 PINEVIEW_CURSOR_MAX_WM,
2635 PINEVIEW_CURSOR_DFT_WM,
2636 PINEVIEW_CURSOR_GUARD_WM,
2637 PINEVIEW_FIFO_LINE_SIZE,
2639 static struct intel_watermark_params pineview_cursor_hplloff_wm = {
2640 PINEVIEW_CURSOR_FIFO,
2641 PINEVIEW_CURSOR_MAX_WM,
2642 PINEVIEW_CURSOR_DFT_WM,
2643 PINEVIEW_CURSOR_GUARD_WM,
2644 PINEVIEW_FIFO_LINE_SIZE
2646 static struct intel_watermark_params g4x_wm_info = {
2653 static struct intel_watermark_params g4x_cursor_wm_info = {
2660 static struct intel_watermark_params i965_cursor_wm_info = {
2665 I915_FIFO_LINE_SIZE,
2667 static struct intel_watermark_params i945_wm_info = {
2674 static struct intel_watermark_params i915_wm_info = {
2681 static struct intel_watermark_params i855_wm_info = {
2688 static struct intel_watermark_params i830_wm_info = {
2696 static struct intel_watermark_params ironlake_display_wm_info = {
2704 static struct intel_watermark_params ironlake_cursor_wm_info = {
2712 static struct intel_watermark_params ironlake_display_srwm_info = {
2713 ILK_DISPLAY_SR_FIFO,
2714 ILK_DISPLAY_MAX_SRWM,
2715 ILK_DISPLAY_DFT_SRWM,
2720 static struct intel_watermark_params ironlake_cursor_srwm_info = {
2722 ILK_CURSOR_MAX_SRWM,
2723 ILK_CURSOR_DFT_SRWM,
2729 * intel_calculate_wm - calculate watermark level
2730 * @clock_in_khz: pixel clock
2731 * @wm: chip FIFO params
2732 * @pixel_size: display pixel size
2733 * @latency_ns: memory latency for the platform
2735 * Calculate the watermark level (the level at which the display plane will
2736 * start fetching from memory again). Each chip has a different display
2737 * FIFO size and allocation, so the caller needs to figure that out and pass
2738 * in the correct intel_watermark_params structure.
2740 * As the pixel clock runs, the FIFO will be drained at a rate that depends
2741 * on the pixel size. When it reaches the watermark level, it'll start
2742 * fetching FIFO line sized based chunks from memory until the FIFO fills
2743 * past the watermark point. If the FIFO drains completely, a FIFO underrun
2744 * will occur, and a display engine hang could result.
2746 static unsigned long intel_calculate_wm(unsigned long clock_in_khz,
2747 struct intel_watermark_params *wm,
2749 unsigned long latency_ns)
2751 long entries_required, wm_size;
2754 * Note: we need to make sure we don't overflow for various clock &
2756 * clocks go from a few thousand to several hundred thousand.
2757 * latency is usually a few thousand
2759 entries_required = ((clock_in_khz / 1000) * pixel_size * latency_ns) /
2761 entries_required = DIV_ROUND_UP(entries_required, wm->cacheline_size);
2763 DRM_DEBUG_KMS("FIFO entries required for mode: %d\n", entries_required);
2765 wm_size = wm->fifo_size - (entries_required + wm->guard_size);
2767 DRM_DEBUG_KMS("FIFO watermark level: %d\n", wm_size);
2769 /* Don't promote wm_size to unsigned... */
2770 if (wm_size > (long)wm->max_wm)
2771 wm_size = wm->max_wm;
2773 wm_size = wm->default_wm;
2774 DRM_ERROR("Insufficient FIFO for plane, expect flickering:"
2775 " entries required = %ld, available = %lu.\n",
2776 entries_required + wm->guard_size,
2783 struct cxsr_latency {
2786 unsigned long fsb_freq;
2787 unsigned long mem_freq;
2788 unsigned long display_sr;
2789 unsigned long display_hpll_disable;
2790 unsigned long cursor_sr;
2791 unsigned long cursor_hpll_disable;
2794 static const struct cxsr_latency cxsr_latency_table[] = {
2795 {1, 0, 800, 400, 3382, 33382, 3983, 33983}, /* DDR2-400 SC */
2796 {1, 0, 800, 667, 3354, 33354, 3807, 33807}, /* DDR2-667 SC */
2797 {1, 0, 800, 800, 3347, 33347, 3763, 33763}, /* DDR2-800 SC */
2798 {1, 1, 800, 667, 6420, 36420, 6873, 36873}, /* DDR3-667 SC */
2799 {1, 1, 800, 800, 5902, 35902, 6318, 36318}, /* DDR3-800 SC */
2801 {1, 0, 667, 400, 3400, 33400, 4021, 34021}, /* DDR2-400 SC */
2802 {1, 0, 667, 667, 3372, 33372, 3845, 33845}, /* DDR2-667 SC */
2803 {1, 0, 667, 800, 3386, 33386, 3822, 33822}, /* DDR2-800 SC */
2804 {1, 1, 667, 667, 6438, 36438, 6911, 36911}, /* DDR3-667 SC */
2805 {1, 1, 667, 800, 5941, 35941, 6377, 36377}, /* DDR3-800 SC */
2807 {1, 0, 400, 400, 3472, 33472, 4173, 34173}, /* DDR2-400 SC */
2808 {1, 0, 400, 667, 3443, 33443, 3996, 33996}, /* DDR2-667 SC */
2809 {1, 0, 400, 800, 3430, 33430, 3946, 33946}, /* DDR2-800 SC */
2810 {1, 1, 400, 667, 6509, 36509, 7062, 37062}, /* DDR3-667 SC */
2811 {1, 1, 400, 800, 5985, 35985, 6501, 36501}, /* DDR3-800 SC */
2813 {0, 0, 800, 400, 3438, 33438, 4065, 34065}, /* DDR2-400 SC */
2814 {0, 0, 800, 667, 3410, 33410, 3889, 33889}, /* DDR2-667 SC */
2815 {0, 0, 800, 800, 3403, 33403, 3845, 33845}, /* DDR2-800 SC */
2816 {0, 1, 800, 667, 6476, 36476, 6955, 36955}, /* DDR3-667 SC */
2817 {0, 1, 800, 800, 5958, 35958, 6400, 36400}, /* DDR3-800 SC */
2819 {0, 0, 667, 400, 3456, 33456, 4103, 34106}, /* DDR2-400 SC */
2820 {0, 0, 667, 667, 3428, 33428, 3927, 33927}, /* DDR2-667 SC */
2821 {0, 0, 667, 800, 3443, 33443, 3905, 33905}, /* DDR2-800 SC */
2822 {0, 1, 667, 667, 6494, 36494, 6993, 36993}, /* DDR3-667 SC */
2823 {0, 1, 667, 800, 5998, 35998, 6460, 36460}, /* DDR3-800 SC */
2825 {0, 0, 400, 400, 3528, 33528, 4255, 34255}, /* DDR2-400 SC */
2826 {0, 0, 400, 667, 3500, 33500, 4079, 34079}, /* DDR2-667 SC */
2827 {0, 0, 400, 800, 3487, 33487, 4029, 34029}, /* DDR2-800 SC */
2828 {0, 1, 400, 667, 6566, 36566, 7145, 37145}, /* DDR3-667 SC */
2829 {0, 1, 400, 800, 6042, 36042, 6584, 36584}, /* DDR3-800 SC */
2832 static const struct cxsr_latency *intel_get_cxsr_latency(int is_desktop,
2837 const struct cxsr_latency *latency;
2840 if (fsb == 0 || mem == 0)
2843 for (i = 0; i < ARRAY_SIZE(cxsr_latency_table); i++) {
2844 latency = &cxsr_latency_table[i];
2845 if (is_desktop == latency->is_desktop &&
2846 is_ddr3 == latency->is_ddr3 &&
2847 fsb == latency->fsb_freq && mem == latency->mem_freq)
2851 DRM_DEBUG_KMS("Unknown FSB/MEM found, disable CxSR\n");
2856 static void pineview_disable_cxsr(struct drm_device *dev)
2858 struct drm_i915_private *dev_priv = dev->dev_private;
2860 /* deactivate cxsr */
2861 I915_WRITE(DSPFW3, I915_READ(DSPFW3) & ~PINEVIEW_SELF_REFRESH_EN);
2865 * Latency for FIFO fetches is dependent on several factors:
2866 * - memory configuration (speed, channels)
2868 * - current MCH state
2869 * It can be fairly high in some situations, so here we assume a fairly
2870 * pessimal value. It's a tradeoff between extra memory fetches (if we
2871 * set this value too high, the FIFO will fetch frequently to stay full)
2872 * and power consumption (set it too low to save power and we might see
2873 * FIFO underruns and display "flicker").
2875 * A value of 5us seems to be a good balance; safe for very low end
2876 * platforms but not overly aggressive on lower latency configs.
2878 static const int latency_ns = 5000;
2880 static int i9xx_get_fifo_size(struct drm_device *dev, int plane)
2882 struct drm_i915_private *dev_priv = dev->dev_private;
2883 uint32_t dsparb = I915_READ(DSPARB);
2886 size = dsparb & 0x7f;
2888 size = ((dsparb >> DSPARB_CSTART_SHIFT) & 0x7f) - size;
2890 DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb,
2891 plane ? "B" : "A", size);
2896 static int i85x_get_fifo_size(struct drm_device *dev, int plane)
2898 struct drm_i915_private *dev_priv = dev->dev_private;
2899 uint32_t dsparb = I915_READ(DSPARB);
2902 size = dsparb & 0x1ff;
2904 size = ((dsparb >> DSPARB_BEND_SHIFT) & 0x1ff) - size;
2905 size >>= 1; /* Convert to cachelines */
2907 DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb,
2908 plane ? "B" : "A", size);
2913 static int i845_get_fifo_size(struct drm_device *dev, int plane)
2915 struct drm_i915_private *dev_priv = dev->dev_private;
2916 uint32_t dsparb = I915_READ(DSPARB);
2919 size = dsparb & 0x7f;
2920 size >>= 2; /* Convert to cachelines */
2922 DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb,
2929 static int i830_get_fifo_size(struct drm_device *dev, int plane)
2931 struct drm_i915_private *dev_priv = dev->dev_private;
2932 uint32_t dsparb = I915_READ(DSPARB);
2935 size = dsparb & 0x7f;
2936 size >>= 1; /* Convert to cachelines */
2938 DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb,
2939 plane ? "B" : "A", size);
2944 static void pineview_update_wm(struct drm_device *dev, int planea_clock,
2945 int planeb_clock, int sr_hdisplay, int unused,
2948 struct drm_i915_private *dev_priv = dev->dev_private;
2949 const struct cxsr_latency *latency;
2954 latency = intel_get_cxsr_latency(IS_PINEVIEW_G(dev), dev_priv->is_ddr3,
2955 dev_priv->fsb_freq, dev_priv->mem_freq);
2957 DRM_DEBUG_KMS("Unknown FSB/MEM found, disable CxSR\n");
2958 pineview_disable_cxsr(dev);
2962 if (!planea_clock || !planeb_clock) {
2963 sr_clock = planea_clock ? planea_clock : planeb_clock;
2966 wm = intel_calculate_wm(sr_clock, &pineview_display_wm,
2967 pixel_size, latency->display_sr);
2968 reg = I915_READ(DSPFW1);
2969 reg &= ~DSPFW_SR_MASK;
2970 reg |= wm << DSPFW_SR_SHIFT;
2971 I915_WRITE(DSPFW1, reg);
2972 DRM_DEBUG_KMS("DSPFW1 register is %x\n", reg);
2975 wm = intel_calculate_wm(sr_clock, &pineview_cursor_wm,
2976 pixel_size, latency->cursor_sr);
2977 reg = I915_READ(DSPFW3);
2978 reg &= ~DSPFW_CURSOR_SR_MASK;
2979 reg |= (wm & 0x3f) << DSPFW_CURSOR_SR_SHIFT;
2980 I915_WRITE(DSPFW3, reg);
2982 /* Display HPLL off SR */
2983 wm = intel_calculate_wm(sr_clock, &pineview_display_hplloff_wm,
2984 pixel_size, latency->display_hpll_disable);
2985 reg = I915_READ(DSPFW3);
2986 reg &= ~DSPFW_HPLL_SR_MASK;
2987 reg |= wm & DSPFW_HPLL_SR_MASK;
2988 I915_WRITE(DSPFW3, reg);
2990 /* cursor HPLL off SR */
2991 wm = intel_calculate_wm(sr_clock, &pineview_cursor_hplloff_wm,
2992 pixel_size, latency->cursor_hpll_disable);
2993 reg = I915_READ(DSPFW3);
2994 reg &= ~DSPFW_HPLL_CURSOR_MASK;
2995 reg |= (wm & 0x3f) << DSPFW_HPLL_CURSOR_SHIFT;
2996 I915_WRITE(DSPFW3, reg);
2997 DRM_DEBUG_KMS("DSPFW3 register is %x\n", reg);
3001 I915_READ(DSPFW3) | PINEVIEW_SELF_REFRESH_EN);
3002 DRM_DEBUG_KMS("Self-refresh is enabled\n");
3004 pineview_disable_cxsr(dev);
3005 DRM_DEBUG_KMS("Self-refresh is disabled\n");
3009 static void g4x_update_wm(struct drm_device *dev, int planea_clock,
3010 int planeb_clock, int sr_hdisplay, int sr_htotal,
3013 struct drm_i915_private *dev_priv = dev->dev_private;
3014 int total_size, cacheline_size;
3015 int planea_wm, planeb_wm, cursora_wm, cursorb_wm, cursor_sr;
3016 struct intel_watermark_params planea_params, planeb_params;
3017 unsigned long line_time_us;
3018 int sr_clock, sr_entries = 0, entries_required;
3020 /* Create copies of the base settings for each pipe */
3021 planea_params = planeb_params = g4x_wm_info;
3023 /* Grab a couple of global values before we overwrite them */
3024 total_size = planea_params.fifo_size;
3025 cacheline_size = planea_params.cacheline_size;
3028 * Note: we need to make sure we don't overflow for various clock &
3030 * clocks go from a few thousand to several hundred thousand.
3031 * latency is usually a few thousand
3033 entries_required = ((planea_clock / 1000) * pixel_size * latency_ns) /
3035 entries_required = DIV_ROUND_UP(entries_required, G4X_FIFO_LINE_SIZE);
3036 planea_wm = entries_required + planea_params.guard_size;
3038 entries_required = ((planeb_clock / 1000) * pixel_size * latency_ns) /
3040 entries_required = DIV_ROUND_UP(entries_required, G4X_FIFO_LINE_SIZE);
3041 planeb_wm = entries_required + planeb_params.guard_size;
3043 cursora_wm = cursorb_wm = 16;
3046 DRM_DEBUG("FIFO watermarks - A: %d, B: %d\n", planea_wm, planeb_wm);
3048 /* Calc sr entries for one plane configs */
3049 if (sr_hdisplay && (!planea_clock || !planeb_clock)) {
3050 /* self-refresh has much higher latency */
3051 static const int sr_latency_ns = 12000;
3053 sr_clock = planea_clock ? planea_clock : planeb_clock;
3054 line_time_us = ((sr_htotal * 1000) / sr_clock);
3056 /* Use ns/us then divide to preserve precision */
3057 sr_entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) *
3058 pixel_size * sr_hdisplay;
3059 sr_entries = DIV_ROUND_UP(sr_entries, cacheline_size);
3061 entries_required = (((sr_latency_ns / line_time_us) +
3062 1000) / 1000) * pixel_size * 64;
3063 entries_required = DIV_ROUND_UP(entries_required,
3064 g4x_cursor_wm_info.cacheline_size);
3065 cursor_sr = entries_required + g4x_cursor_wm_info.guard_size;
3067 if (cursor_sr > g4x_cursor_wm_info.max_wm)
3068 cursor_sr = g4x_cursor_wm_info.max_wm;
3069 DRM_DEBUG_KMS("self-refresh watermark: display plane %d "
3070 "cursor %d\n", sr_entries, cursor_sr);
3072 I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN);
3074 /* Turn off self refresh if both pipes are enabled */
3075 I915_WRITE(FW_BLC_SELF, I915_READ(FW_BLC_SELF)
3079 DRM_DEBUG("Setting FIFO watermarks - A: %d, B: %d, SR %d\n",
3080 planea_wm, planeb_wm, sr_entries);
3085 I915_WRITE(DSPFW1, (sr_entries << DSPFW_SR_SHIFT) |
3086 (cursorb_wm << DSPFW_CURSORB_SHIFT) |
3087 (planeb_wm << DSPFW_PLANEB_SHIFT) | planea_wm);
3088 I915_WRITE(DSPFW2, (I915_READ(DSPFW2) & DSPFW_CURSORA_MASK) |
3089 (cursora_wm << DSPFW_CURSORA_SHIFT));
3090 /* HPLL off in SR has some issues on G4x... disable it */
3091 I915_WRITE(DSPFW3, (I915_READ(DSPFW3) & ~DSPFW_HPLL_SR_EN) |
3092 (cursor_sr << DSPFW_CURSOR_SR_SHIFT));
3095 static void i965_update_wm(struct drm_device *dev, int planea_clock,
3096 int planeb_clock, int sr_hdisplay, int sr_htotal,
3099 struct drm_i915_private *dev_priv = dev->dev_private;
3100 unsigned long line_time_us;
3101 int sr_clock, sr_entries, srwm = 1;
3104 /* Calc sr entries for one plane configs */
3105 if (sr_hdisplay && (!planea_clock || !planeb_clock)) {
3106 /* self-refresh has much higher latency */
3107 static const int sr_latency_ns = 12000;
3109 sr_clock = planea_clock ? planea_clock : planeb_clock;
3110 line_time_us = ((sr_htotal * 1000) / sr_clock);
3112 /* Use ns/us then divide to preserve precision */
3113 sr_entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) *
3114 pixel_size * sr_hdisplay;
3115 sr_entries = DIV_ROUND_UP(sr_entries, I915_FIFO_LINE_SIZE);
3116 DRM_DEBUG("self-refresh entries: %d\n", sr_entries);
3117 srwm = I965_FIFO_SIZE - sr_entries;
3122 sr_entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) *
3124 sr_entries = DIV_ROUND_UP(sr_entries,
3125 i965_cursor_wm_info.cacheline_size);
3126 cursor_sr = i965_cursor_wm_info.fifo_size -
3127 (sr_entries + i965_cursor_wm_info.guard_size);
3129 if (cursor_sr > i965_cursor_wm_info.max_wm)
3130 cursor_sr = i965_cursor_wm_info.max_wm;
3132 DRM_DEBUG_KMS("self-refresh watermark: display plane %d "
3133 "cursor %d\n", srwm, cursor_sr);
3136 I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN);
3138 /* Turn off self refresh if both pipes are enabled */
3140 I915_WRITE(FW_BLC_SELF, I915_READ(FW_BLC_SELF)
3144 DRM_DEBUG_KMS("Setting FIFO watermarks - A: 8, B: 8, C: 8, SR %d\n",
3147 /* 965 has limitations... */
3148 I915_WRITE(DSPFW1, (srwm << DSPFW_SR_SHIFT) | (8 << 16) | (8 << 8) |
3150 I915_WRITE(DSPFW2, (8 << 8) | (8 << 0));
3151 /* update cursor SR watermark */
3152 I915_WRITE(DSPFW3, (cursor_sr << DSPFW_CURSOR_SR_SHIFT));
3155 static void i9xx_update_wm(struct drm_device *dev, int planea_clock,
3156 int planeb_clock, int sr_hdisplay, int sr_htotal,
3159 struct drm_i915_private *dev_priv = dev->dev_private;
3162 int total_size, cacheline_size, cwm, srwm = 1;
3163 int planea_wm, planeb_wm;
3164 struct intel_watermark_params planea_params, planeb_params;
3165 unsigned long line_time_us;
3166 int sr_clock, sr_entries = 0;
3168 /* Create copies of the base settings for each pipe */
3169 if (IS_I965GM(dev) || IS_I945GM(dev))
3170 planea_params = planeb_params = i945_wm_info;
3171 else if (IS_I9XX(dev))
3172 planea_params = planeb_params = i915_wm_info;
3174 planea_params = planeb_params = i855_wm_info;
3176 /* Grab a couple of global values before we overwrite them */
3177 total_size = planea_params.fifo_size;
3178 cacheline_size = planea_params.cacheline_size;
3180 /* Update per-plane FIFO sizes */
3181 planea_params.fifo_size = dev_priv->display.get_fifo_size(dev, 0);
3182 planeb_params.fifo_size = dev_priv->display.get_fifo_size(dev, 1);
3184 planea_wm = intel_calculate_wm(planea_clock, &planea_params,
3185 pixel_size, latency_ns);
3186 planeb_wm = intel_calculate_wm(planeb_clock, &planeb_params,
3187 pixel_size, latency_ns);
3188 DRM_DEBUG_KMS("FIFO watermarks - A: %d, B: %d\n", planea_wm, planeb_wm);
3191 * Overlay gets an aggressive default since video jitter is bad.
3195 /* Calc sr entries for one plane configs */
3196 if (HAS_FW_BLC(dev) && sr_hdisplay &&
3197 (!planea_clock || !planeb_clock)) {
3198 /* self-refresh has much higher latency */
3199 static const int sr_latency_ns = 6000;
3201 sr_clock = planea_clock ? planea_clock : planeb_clock;
3202 line_time_us = ((sr_htotal * 1000) / sr_clock);
3204 /* Use ns/us then divide to preserve precision */
3205 sr_entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) *
3206 pixel_size * sr_hdisplay;
3207 sr_entries = DIV_ROUND_UP(sr_entries, cacheline_size);
3208 DRM_DEBUG_KMS("self-refresh entries: %d\n", sr_entries);
3209 srwm = total_size - sr_entries;
3213 if (IS_I945G(dev) || IS_I945GM(dev))
3214 I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_FIFO_MASK | (srwm & 0xff));
3215 else if (IS_I915GM(dev)) {
3216 /* 915M has a smaller SRWM field */
3217 I915_WRITE(FW_BLC_SELF, srwm & 0x3f);
3218 I915_WRITE(INSTPM, I915_READ(INSTPM) | INSTPM_SELF_EN);
3221 /* Turn off self refresh if both pipes are enabled */
3222 if (IS_I945G(dev) || IS_I945GM(dev)) {
3223 I915_WRITE(FW_BLC_SELF, I915_READ(FW_BLC_SELF)
3225 } else if (IS_I915GM(dev)) {
3226 I915_WRITE(INSTPM, I915_READ(INSTPM) & ~INSTPM_SELF_EN);
3230 DRM_DEBUG_KMS("Setting FIFO watermarks - A: %d, B: %d, C: %d, SR %d\n",
3231 planea_wm, planeb_wm, cwm, srwm);
3233 fwater_lo = ((planeb_wm & 0x3f) << 16) | (planea_wm & 0x3f);
3234 fwater_hi = (cwm & 0x1f);
3236 /* Set request length to 8 cachelines per fetch */
3237 fwater_lo = fwater_lo | (1 << 24) | (1 << 8);
3238 fwater_hi = fwater_hi | (1 << 8);
3240 I915_WRITE(FW_BLC, fwater_lo);
3241 I915_WRITE(FW_BLC2, fwater_hi);
3244 static void i830_update_wm(struct drm_device *dev, int planea_clock, int unused,
3245 int unused2, int unused3, int pixel_size)
3247 struct drm_i915_private *dev_priv = dev->dev_private;
3248 uint32_t fwater_lo = I915_READ(FW_BLC) & ~0xfff;
3251 i830_wm_info.fifo_size = dev_priv->display.get_fifo_size(dev, 0);
3253 planea_wm = intel_calculate_wm(planea_clock, &i830_wm_info,
3254 pixel_size, latency_ns);
3255 fwater_lo |= (3<<8) | planea_wm;
3257 DRM_DEBUG_KMS("Setting FIFO watermarks - A: %d\n", planea_wm);
3259 I915_WRITE(FW_BLC, fwater_lo);
3262 #define ILK_LP0_PLANE_LATENCY 700
3263 #define ILK_LP0_CURSOR_LATENCY 1300
3265 static void ironlake_update_wm(struct drm_device *dev, int planea_clock,
3266 int planeb_clock, int sr_hdisplay, int sr_htotal,
3269 struct drm_i915_private *dev_priv = dev->dev_private;
3270 int planea_wm, planeb_wm, cursora_wm, cursorb_wm;
3271 int sr_wm, cursor_wm;
3272 unsigned long line_time_us;
3273 int sr_clock, entries_required;
3276 int planea_htotal = 0, planeb_htotal = 0;
3277 struct drm_crtc *crtc;
3279 /* Need htotal for all active display plane */
3280 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
3281 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3282 if (intel_crtc->dpms_mode == DRM_MODE_DPMS_ON) {
3283 if (intel_crtc->plane == 0)
3284 planea_htotal = crtc->mode.htotal;
3286 planeb_htotal = crtc->mode.htotal;
3290 /* Calculate and update the watermark for plane A */
3292 entries_required = ((planea_clock / 1000) * pixel_size *
3293 ILK_LP0_PLANE_LATENCY) / 1000;
3294 entries_required = DIV_ROUND_UP(entries_required,
3295 ironlake_display_wm_info.cacheline_size);
3296 planea_wm = entries_required +
3297 ironlake_display_wm_info.guard_size;
3299 if (planea_wm > (int)ironlake_display_wm_info.max_wm)
3300 planea_wm = ironlake_display_wm_info.max_wm;
3302 /* Use the large buffer method to calculate cursor watermark */
3303 line_time_us = (planea_htotal * 1000) / planea_clock;
3305 /* Use ns/us then divide to preserve precision */
3306 line_count = (ILK_LP0_CURSOR_LATENCY / line_time_us + 1000) / 1000;
3308 /* calculate the cursor watermark for cursor A */
3309 entries_required = line_count * 64 * pixel_size;
3310 entries_required = DIV_ROUND_UP(entries_required,
3311 ironlake_cursor_wm_info.cacheline_size);
3312 cursora_wm = entries_required + ironlake_cursor_wm_info.guard_size;
3313 if (cursora_wm > ironlake_cursor_wm_info.max_wm)
3314 cursora_wm = ironlake_cursor_wm_info.max_wm;
3316 reg_value = I915_READ(WM0_PIPEA_ILK);
3317 reg_value &= ~(WM0_PIPE_PLANE_MASK | WM0_PIPE_CURSOR_MASK);
3318 reg_value |= (planea_wm << WM0_PIPE_PLANE_SHIFT) |
3319 (cursora_wm & WM0_PIPE_CURSOR_MASK);
3320 I915_WRITE(WM0_PIPEA_ILK, reg_value);
3321 DRM_DEBUG_KMS("FIFO watermarks For pipe A - plane %d, "
3322 "cursor: %d\n", planea_wm, cursora_wm);
3324 /* Calculate and update the watermark for plane B */
3326 entries_required = ((planeb_clock / 1000) * pixel_size *
3327 ILK_LP0_PLANE_LATENCY) / 1000;
3328 entries_required = DIV_ROUND_UP(entries_required,
3329 ironlake_display_wm_info.cacheline_size);
3330 planeb_wm = entries_required +
3331 ironlake_display_wm_info.guard_size;
3333 if (planeb_wm > (int)ironlake_display_wm_info.max_wm)
3334 planeb_wm = ironlake_display_wm_info.max_wm;
3336 /* Use the large buffer method to calculate cursor watermark */
3337 line_time_us = (planeb_htotal * 1000) / planeb_clock;
3339 /* Use ns/us then divide to preserve precision */
3340 line_count = (ILK_LP0_CURSOR_LATENCY / line_time_us + 1000) / 1000;
3342 /* calculate the cursor watermark for cursor B */
3343 entries_required = line_count * 64 * pixel_size;
3344 entries_required = DIV_ROUND_UP(entries_required,
3345 ironlake_cursor_wm_info.cacheline_size);
3346 cursorb_wm = entries_required + ironlake_cursor_wm_info.guard_size;
3347 if (cursorb_wm > ironlake_cursor_wm_info.max_wm)
3348 cursorb_wm = ironlake_cursor_wm_info.max_wm;
3350 reg_value = I915_READ(WM0_PIPEB_ILK);
3351 reg_value &= ~(WM0_PIPE_PLANE_MASK | WM0_PIPE_CURSOR_MASK);
3352 reg_value |= (planeb_wm << WM0_PIPE_PLANE_SHIFT) |
3353 (cursorb_wm & WM0_PIPE_CURSOR_MASK);
3354 I915_WRITE(WM0_PIPEB_ILK, reg_value);
3355 DRM_DEBUG_KMS("FIFO watermarks For pipe B - plane %d, "
3356 "cursor: %d\n", planeb_wm, cursorb_wm);
3360 * Calculate and update the self-refresh watermark only when one
3361 * display plane is used.
3363 if (!planea_clock || !planeb_clock) {
3365 /* Read the self-refresh latency. The unit is 0.5us */
3366 int ilk_sr_latency = I915_READ(MLTR_ILK) & ILK_SRLT_MASK;
3368 sr_clock = planea_clock ? planea_clock : planeb_clock;
3369 line_time_us = ((sr_htotal * 1000) / sr_clock);
3371 /* Use ns/us then divide to preserve precision */
3372 line_count = ((ilk_sr_latency * 500) / line_time_us + 1000)
3375 /* calculate the self-refresh watermark for display plane */
3376 entries_required = line_count * sr_hdisplay * pixel_size;
3377 entries_required = DIV_ROUND_UP(entries_required,
3378 ironlake_display_srwm_info.cacheline_size);
3379 sr_wm = entries_required +
3380 ironlake_display_srwm_info.guard_size;
3382 /* calculate the self-refresh watermark for display cursor */
3383 entries_required = line_count * pixel_size * 64;
3384 entries_required = DIV_ROUND_UP(entries_required,
3385 ironlake_cursor_srwm_info.cacheline_size);
3386 cursor_wm = entries_required +
3387 ironlake_cursor_srwm_info.guard_size;
3389 /* configure watermark and enable self-refresh */
3390 reg_value = I915_READ(WM1_LP_ILK);
3391 reg_value &= ~(WM1_LP_LATENCY_MASK | WM1_LP_SR_MASK |
3392 WM1_LP_CURSOR_MASK);
3393 reg_value |= WM1_LP_SR_EN |
3394 (ilk_sr_latency << WM1_LP_LATENCY_SHIFT) |
3395 (sr_wm << WM1_LP_SR_SHIFT) | cursor_wm;
3397 I915_WRITE(WM1_LP_ILK, reg_value);
3398 DRM_DEBUG_KMS("self-refresh watermark: display plane %d "
3399 "cursor %d\n", sr_wm, cursor_wm);
3402 /* Turn off self refresh if both pipes are enabled */
3403 I915_WRITE(WM1_LP_ILK, I915_READ(WM1_LP_ILK) & ~WM1_LP_SR_EN);
3407 * intel_update_watermarks - update FIFO watermark values based on current modes
3409 * Calculate watermark values for the various WM regs based on current mode
3410 * and plane configuration.
3412 * There are several cases to deal with here:
3413 * - normal (i.e. non-self-refresh)
3414 * - self-refresh (SR) mode
3415 * - lines are large relative to FIFO size (buffer can hold up to 2)
3416 * - lines are small relative to FIFO size (buffer can hold more than 2
3417 * lines), so need to account for TLB latency
3419 * The normal calculation is:
3420 * watermark = dotclock * bytes per pixel * latency
3421 * where latency is platform & configuration dependent (we assume pessimal
3424 * The SR calculation is:
3425 * watermark = (trunc(latency/line time)+1) * surface width *
3428 * line time = htotal / dotclock
3429 * surface width = hdisplay for normal plane and 64 for cursor
3430 * and latency is assumed to be high, as above.
3432 * The final value programmed to the register should always be rounded up,
3433 * and include an extra 2 entries to account for clock crossings.
3435 * We don't use the sprite, so we can ignore that. And on Crestline we have
3436 * to set the non-SR watermarks to 8.
3438 static void intel_update_watermarks(struct drm_device *dev)
3440 struct drm_i915_private *dev_priv = dev->dev_private;
3441 struct drm_crtc *crtc;
3442 int sr_hdisplay = 0;
3443 unsigned long planea_clock = 0, planeb_clock = 0, sr_clock = 0;
3444 int enabled = 0, pixel_size = 0;
3447 if (!dev_priv->display.update_wm)
3450 /* Get the clock config from both planes */
3451 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
3452 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3453 if (intel_crtc->dpms_mode == DRM_MODE_DPMS_ON) {
3455 if (intel_crtc->plane == 0) {
3456 DRM_DEBUG_KMS("plane A (pipe %d) clock: %d\n",
3457 intel_crtc->pipe, crtc->mode.clock);
3458 planea_clock = crtc->mode.clock;
3460 DRM_DEBUG_KMS("plane B (pipe %d) clock: %d\n",
3461 intel_crtc->pipe, crtc->mode.clock);
3462 planeb_clock = crtc->mode.clock;
3464 sr_hdisplay = crtc->mode.hdisplay;
3465 sr_clock = crtc->mode.clock;
3466 sr_htotal = crtc->mode.htotal;
3468 pixel_size = crtc->fb->bits_per_pixel / 8;
3470 pixel_size = 4; /* by default */
3477 dev_priv->display.update_wm(dev, planea_clock, planeb_clock,
3478 sr_hdisplay, sr_htotal, pixel_size);
3481 static int intel_crtc_mode_set(struct drm_crtc *crtc,
3482 struct drm_display_mode *mode,
3483 struct drm_display_mode *adjusted_mode,
3485 struct drm_framebuffer *old_fb)
3487 struct drm_device *dev = crtc->dev;
3488 struct drm_i915_private *dev_priv = dev->dev_private;
3489 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3490 int pipe = intel_crtc->pipe;
3491 int plane = intel_crtc->plane;
3492 int fp_reg = (pipe == 0) ? FPA0 : FPB0;
3493 int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
3494 int dpll_md_reg = (intel_crtc->pipe == 0) ? DPLL_A_MD : DPLL_B_MD;
3495 int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR;
3496 int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
3497 int htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B;
3498 int hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B;
3499 int hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B;
3500 int vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B;
3501 int vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B;
3502 int vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B;
3503 int dspsize_reg = (plane == 0) ? DSPASIZE : DSPBSIZE;
3504 int dsppos_reg = (plane == 0) ? DSPAPOS : DSPBPOS;
3505 int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC;
3506 int refclk, num_connectors = 0;
3507 intel_clock_t clock, reduced_clock;
3508 u32 dpll = 0, fp = 0, fp2 = 0, dspcntr, pipeconf;
3509 bool ok, has_reduced_clock = false, is_sdvo = false, is_dvo = false;
3510 bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false;
3511 bool is_edp = false;
3512 struct drm_mode_config *mode_config = &dev->mode_config;
3513 struct drm_encoder *encoder;
3514 struct intel_encoder *intel_encoder = NULL;
3515 const intel_limit_t *limit;
3517 struct fdi_m_n m_n = {0};
3518 int data_m1_reg = (pipe == 0) ? PIPEA_DATA_M1 : PIPEB_DATA_M1;
3519 int data_n1_reg = (pipe == 0) ? PIPEA_DATA_N1 : PIPEB_DATA_N1;
3520 int link_m1_reg = (pipe == 0) ? PIPEA_LINK_M1 : PIPEB_LINK_M1;
3521 int link_n1_reg = (pipe == 0) ? PIPEA_LINK_N1 : PIPEB_LINK_N1;
3522 int pch_fp_reg = (pipe == 0) ? PCH_FPA0 : PCH_FPB0;
3523 int pch_dpll_reg = (pipe == 0) ? PCH_DPLL_A : PCH_DPLL_B;
3524 int fdi_rx_reg = (pipe == 0) ? FDI_RXA_CTL : FDI_RXB_CTL;
3525 int fdi_tx_reg = (pipe == 0) ? FDI_TXA_CTL : FDI_TXB_CTL;
3526 int trans_dpll_sel = (pipe == 0) ? 0 : 1;
3527 int lvds_reg = LVDS;
3529 int sdvo_pixel_multiply;
3532 drm_vblank_pre_modeset(dev, pipe);
3534 list_for_each_entry(encoder, &mode_config->encoder_list, head) {
3536 if (!encoder || encoder->crtc != crtc)
3539 intel_encoder = enc_to_intel_encoder(encoder);
3541 switch (intel_encoder->type) {
3542 case INTEL_OUTPUT_LVDS:
3545 case INTEL_OUTPUT_SDVO:
3546 case INTEL_OUTPUT_HDMI:
3548 if (intel_encoder->needs_tv_clock)
3551 case INTEL_OUTPUT_DVO:
3554 case INTEL_OUTPUT_TVOUT:
3557 case INTEL_OUTPUT_ANALOG:
3560 case INTEL_OUTPUT_DISPLAYPORT:
3563 case INTEL_OUTPUT_EDP:
3571 if (is_lvds && dev_priv->lvds_use_ssc && num_connectors < 2) {
3572 refclk = dev_priv->lvds_ssc_freq * 1000;
3573 DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n",
3575 } else if (IS_I9XX(dev)) {
3577 if (HAS_PCH_SPLIT(dev))
3578 refclk = 120000; /* 120Mhz refclk */
3585 * Returns a set of divisors for the desired target clock with the given
3586 * refclk, or FALSE. The returned values represent the clock equation:
3587 * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
3589 limit = intel_limit(crtc);
3590 ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, &clock);
3592 DRM_ERROR("Couldn't find PLL settings for mode!\n");
3593 drm_vblank_post_modeset(dev, pipe);
3597 /* Ensure that the cursor is valid for the new mode before changing... */
3598 intel_crtc_update_cursor(crtc);
3600 if (is_lvds && dev_priv->lvds_downclock_avail) {
3601 has_reduced_clock = limit->find_pll(limit, crtc,
3602 dev_priv->lvds_downclock,
3605 if (has_reduced_clock && (clock.p != reduced_clock.p)) {
3607 * If the different P is found, it means that we can't
3608 * switch the display clock by using the FP0/FP1.
3609 * In such case we will disable the LVDS downclock
3612 DRM_DEBUG_KMS("Different P is found for "
3613 "LVDS clock/downclock\n");
3614 has_reduced_clock = 0;
3617 /* SDVO TV has fixed PLL values depend on its clock range,
3618 this mirrors vbios setting. */
3619 if (is_sdvo && is_tv) {
3620 if (adjusted_mode->clock >= 100000
3621 && adjusted_mode->clock < 140500) {
3627 } else if (adjusted_mode->clock >= 140500
3628 && adjusted_mode->clock <= 200000) {
3638 if (HAS_PCH_SPLIT(dev)) {
3639 int lane = 0, link_bw, bpp;
3640 /* eDP doesn't require FDI link, so just set DP M/N
3641 according to current link config */
3643 target_clock = mode->clock;
3644 intel_edp_link_config(intel_encoder,
3647 /* DP over FDI requires target mode clock
3648 instead of link clock */
3650 target_clock = mode->clock;
3652 target_clock = adjusted_mode->clock;
3656 /* determine panel color depth */
3657 temp = I915_READ(pipeconf_reg);
3658 temp &= ~PIPE_BPC_MASK;
3660 int lvds_reg = I915_READ(PCH_LVDS);
3661 /* the BPC will be 6 if it is 18-bit LVDS panel */
3662 if ((lvds_reg & LVDS_A3_POWER_MASK) == LVDS_A3_POWER_UP)
3666 } else if (is_edp || (is_dp && intel_pch_has_edp(crtc))) {
3667 switch (dev_priv->edp_bpp/3) {
3683 I915_WRITE(pipeconf_reg, temp);
3684 I915_READ(pipeconf_reg);
3686 switch (temp & PIPE_BPC_MASK) {
3700 DRM_ERROR("unknown pipe bpc value\n");
3706 * Account for spread spectrum to avoid
3707 * oversubscribing the link. Max center spread
3708 * is 2.5%; use 5% for safety's sake.
3710 u32 bps = target_clock * bpp * 21 / 20;
3711 lane = bps / (link_bw * 8) + 1;
3714 intel_crtc->fdi_lanes = lane;
3716 ironlake_compute_m_n(bpp, lane, target_clock, link_bw, &m_n);
3719 /* Ironlake: try to setup display ref clock before DPLL
3720 * enabling. This is only under driver's control after
3721 * PCH B stepping, previous chipset stepping should be
3722 * ignoring this setting.
3724 if (HAS_PCH_SPLIT(dev)) {
3725 temp = I915_READ(PCH_DREF_CONTROL);
3726 /* Always enable nonspread source */
3727 temp &= ~DREF_NONSPREAD_SOURCE_MASK;
3728 temp |= DREF_NONSPREAD_SOURCE_ENABLE;
3729 I915_WRITE(PCH_DREF_CONTROL, temp);
3730 POSTING_READ(PCH_DREF_CONTROL);
3732 temp &= ~DREF_SSC_SOURCE_MASK;
3733 temp |= DREF_SSC_SOURCE_ENABLE;
3734 I915_WRITE(PCH_DREF_CONTROL, temp);
3735 POSTING_READ(PCH_DREF_CONTROL);
3740 if (dev_priv->lvds_use_ssc) {
3741 temp |= DREF_SSC1_ENABLE;
3742 I915_WRITE(PCH_DREF_CONTROL, temp);
3743 POSTING_READ(PCH_DREF_CONTROL);
3747 temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
3748 temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
3749 I915_WRITE(PCH_DREF_CONTROL, temp);
3750 POSTING_READ(PCH_DREF_CONTROL);
3752 temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
3753 I915_WRITE(PCH_DREF_CONTROL, temp);
3754 POSTING_READ(PCH_DREF_CONTROL);
3759 if (IS_PINEVIEW(dev)) {
3760 fp = (1 << clock.n) << 16 | clock.m1 << 8 | clock.m2;
3761 if (has_reduced_clock)
3762 fp2 = (1 << reduced_clock.n) << 16 |
3763 reduced_clock.m1 << 8 | reduced_clock.m2;
3765 fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
3766 if (has_reduced_clock)
3767 fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 |
3771 if (!HAS_PCH_SPLIT(dev))
3772 dpll = DPLL_VGA_MODE_DIS;
3776 dpll |= DPLLB_MODE_LVDS;
3778 dpll |= DPLLB_MODE_DAC_SERIAL;
3780 dpll |= DPLL_DVO_HIGH_SPEED;
3781 sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
3782 if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
3783 dpll |= (sdvo_pixel_multiply - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
3784 else if (HAS_PCH_SPLIT(dev))
3785 dpll |= (sdvo_pixel_multiply - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
3788 dpll |= DPLL_DVO_HIGH_SPEED;
3790 /* compute bitmask from p1 value */
3791 if (IS_PINEVIEW(dev))
3792 dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW;
3794 dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
3796 if (HAS_PCH_SPLIT(dev))
3797 dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
3798 if (IS_G4X(dev) && has_reduced_clock)
3799 dpll |= (1 << (reduced_clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
3803 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
3806 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
3809 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
3812 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
3815 if (IS_I965G(dev) && !HAS_PCH_SPLIT(dev))
3816 dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
3819 dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
3822 dpll |= PLL_P1_DIVIDE_BY_TWO;
3824 dpll |= (clock.p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT;
3826 dpll |= PLL_P2_DIVIDE_BY_4;
3830 if (is_sdvo && is_tv)
3831 dpll |= PLL_REF_INPUT_TVCLKINBC;
3833 /* XXX: just matching BIOS for now */
3834 /* dpll |= PLL_REF_INPUT_TVCLKINBC; */
3836 else if (is_lvds && dev_priv->lvds_use_ssc && num_connectors < 2)
3837 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
3839 dpll |= PLL_REF_INPUT_DREFCLK;
3841 /* setup pipeconf */
3842 pipeconf = I915_READ(pipeconf_reg);
3844 /* Set up the display plane register */
3845 dspcntr = DISPPLANE_GAMMA_ENABLE;
3847 /* Ironlake's plane is forced to pipe, bit 24 is to
3848 enable color space conversion */
3849 if (!HAS_PCH_SPLIT(dev)) {
3851 dspcntr &= ~DISPPLANE_SEL_PIPE_MASK;
3853 dspcntr |= DISPPLANE_SEL_PIPE_B;
3856 if (pipe == 0 && !IS_I965G(dev)) {
3857 /* Enable pixel doubling when the dot clock is > 90% of the (display)
3860 * XXX: No double-wide on 915GM pipe B. Is that the only reason for the
3864 dev_priv->display.get_display_clock_speed(dev) * 9 / 10)
3865 pipeconf |= PIPEACONF_DOUBLE_WIDE;
3867 pipeconf &= ~PIPEACONF_DOUBLE_WIDE;
3870 dspcntr |= DISPLAY_PLANE_ENABLE;
3871 pipeconf |= PIPEACONF_ENABLE;
3872 dpll |= DPLL_VCO_ENABLE;
3875 /* Disable the panel fitter if it was on our pipe */
3876 if (!HAS_PCH_SPLIT(dev) && intel_panel_fitter_pipe(dev) == pipe)
3877 I915_WRITE(PFIT_CONTROL, 0);
3879 DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
3880 drm_mode_debug_printmodeline(mode);
3882 /* assign to Ironlake registers */
3883 if (HAS_PCH_SPLIT(dev)) {
3884 fp_reg = pch_fp_reg;
3885 dpll_reg = pch_dpll_reg;
3889 I915_WRITE(fp_reg, fp);
3890 I915_WRITE(dpll_reg, dpll & ~DPLL_VCO_ENABLE);
3891 I915_READ(dpll_reg);
3895 /* enable transcoder DPLL */
3896 if (HAS_PCH_CPT(dev)) {
3897 temp = I915_READ(PCH_DPLL_SEL);
3898 if (trans_dpll_sel == 0)
3899 temp |= (TRANSA_DPLL_ENABLE | TRANSA_DPLLA_SEL);
3901 temp |= (TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL);
3902 I915_WRITE(PCH_DPLL_SEL, temp);
3903 I915_READ(PCH_DPLL_SEL);
3907 if (HAS_PCH_SPLIT(dev)) {
3908 pipeconf &= ~PIPE_ENABLE_DITHER;
3909 pipeconf &= ~PIPE_DITHER_TYPE_MASK;
3912 /* The LVDS pin pair needs to be on before the DPLLs are enabled.
3913 * This is an exception to the general rule that mode_set doesn't turn
3919 if (HAS_PCH_SPLIT(dev))
3920 lvds_reg = PCH_LVDS;
3922 lvds = I915_READ(lvds_reg);
3923 lvds |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
3925 if (HAS_PCH_CPT(dev))
3926 lvds |= PORT_TRANS_B_SEL_CPT;
3928 lvds |= LVDS_PIPEB_SELECT;
3930 if (HAS_PCH_CPT(dev))
3931 lvds &= ~PORT_TRANS_SEL_MASK;
3933 lvds &= ~LVDS_PIPEB_SELECT;
3935 /* set the corresponsding LVDS_BORDER bit */
3936 lvds |= dev_priv->lvds_border_bits;
3937 /* Set the B0-B3 data pairs corresponding to whether we're going to
3938 * set the DPLLs for dual-channel mode or not.
3941 lvds |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
3943 lvds &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
3945 /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
3946 * appropriately here, but we need to look more thoroughly into how
3947 * panels behave in the two modes.
3949 /* set the dithering flag */
3950 if (IS_I965G(dev)) {
3951 if (dev_priv->lvds_dither) {
3952 if (HAS_PCH_SPLIT(dev)) {
3953 pipeconf |= PIPE_ENABLE_DITHER;
3954 pipeconf |= PIPE_DITHER_TYPE_ST01;
3956 lvds |= LVDS_ENABLE_DITHER;
3958 if (!HAS_PCH_SPLIT(dev)) {
3959 lvds &= ~LVDS_ENABLE_DITHER;
3963 I915_WRITE(lvds_reg, lvds);
3964 I915_READ(lvds_reg);
3967 intel_dp_set_m_n(crtc, mode, adjusted_mode);
3968 else if (HAS_PCH_SPLIT(dev)) {
3969 /* For non-DP output, clear any trans DP clock recovery setting.*/
3971 I915_WRITE(TRANSA_DATA_M1, 0);
3972 I915_WRITE(TRANSA_DATA_N1, 0);
3973 I915_WRITE(TRANSA_DP_LINK_M1, 0);
3974 I915_WRITE(TRANSA_DP_LINK_N1, 0);
3976 I915_WRITE(TRANSB_DATA_M1, 0);
3977 I915_WRITE(TRANSB_DATA_N1, 0);
3978 I915_WRITE(TRANSB_DP_LINK_M1, 0);
3979 I915_WRITE(TRANSB_DP_LINK_N1, 0);
3984 I915_WRITE(fp_reg, fp);
3985 I915_WRITE(dpll_reg, dpll);
3986 I915_READ(dpll_reg);
3987 /* Wait for the clocks to stabilize. */
3990 if (IS_I965G(dev) && !HAS_PCH_SPLIT(dev)) {
3992 sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
3993 I915_WRITE(dpll_md_reg, (0 << DPLL_MD_UDI_DIVIDER_SHIFT) |
3994 ((sdvo_pixel_multiply - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT));
3996 I915_WRITE(dpll_md_reg, 0);
3998 /* write it again -- the BIOS does, after all */
3999 I915_WRITE(dpll_reg, dpll);
4001 I915_READ(dpll_reg);
4002 /* Wait for the clocks to stabilize. */
4006 if (is_lvds && has_reduced_clock && i915_powersave) {
4007 I915_WRITE(fp_reg + 4, fp2);
4008 intel_crtc->lowfreq_avail = true;
4009 if (HAS_PIPE_CXSR(dev)) {
4010 DRM_DEBUG_KMS("enabling CxSR downclocking\n");
4011 pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
4014 I915_WRITE(fp_reg + 4, fp);
4015 intel_crtc->lowfreq_avail = false;
4016 if (HAS_PIPE_CXSR(dev)) {
4017 DRM_DEBUG_KMS("disabling CxSR downclocking\n");
4018 pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK;
4022 if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
4023 pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
4024 /* the chip adds 2 halflines automatically */
4025 adjusted_mode->crtc_vdisplay -= 1;
4026 adjusted_mode->crtc_vtotal -= 1;
4027 adjusted_mode->crtc_vblank_start -= 1;
4028 adjusted_mode->crtc_vblank_end -= 1;
4029 adjusted_mode->crtc_vsync_end -= 1;
4030 adjusted_mode->crtc_vsync_start -= 1;
4032 pipeconf &= ~PIPECONF_INTERLACE_W_FIELD_INDICATION; /* progressive */
4034 I915_WRITE(htot_reg, (adjusted_mode->crtc_hdisplay - 1) |
4035 ((adjusted_mode->crtc_htotal - 1) << 16));
4036 I915_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - 1) |
4037 ((adjusted_mode->crtc_hblank_end - 1) << 16));
4038 I915_WRITE(hsync_reg, (adjusted_mode->crtc_hsync_start - 1) |
4039 ((adjusted_mode->crtc_hsync_end - 1) << 16));
4040 I915_WRITE(vtot_reg, (adjusted_mode->crtc_vdisplay - 1) |
4041 ((adjusted_mode->crtc_vtotal - 1) << 16));
4042 I915_WRITE(vblank_reg, (adjusted_mode->crtc_vblank_start - 1) |
4043 ((adjusted_mode->crtc_vblank_end - 1) << 16));
4044 I915_WRITE(vsync_reg, (adjusted_mode->crtc_vsync_start - 1) |
4045 ((adjusted_mode->crtc_vsync_end - 1) << 16));
4046 /* pipesrc and dspsize control the size that is scaled from, which should
4047 * always be the user's requested size.
4049 if (!HAS_PCH_SPLIT(dev)) {
4050 I915_WRITE(dspsize_reg, ((mode->vdisplay - 1) << 16) |
4051 (mode->hdisplay - 1));
4052 I915_WRITE(dsppos_reg, 0);
4054 I915_WRITE(pipesrc_reg, ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
4056 if (HAS_PCH_SPLIT(dev)) {
4057 I915_WRITE(data_m1_reg, TU_SIZE(m_n.tu) | m_n.gmch_m);
4058 I915_WRITE(data_n1_reg, TU_SIZE(m_n.tu) | m_n.gmch_n);
4059 I915_WRITE(link_m1_reg, m_n.link_m);
4060 I915_WRITE(link_n1_reg, m_n.link_n);
4063 ironlake_set_pll_edp(crtc, adjusted_mode->clock);
4065 /* enable FDI RX PLL too */
4066 temp = I915_READ(fdi_rx_reg);
4067 I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE);
4068 I915_READ(fdi_rx_reg);
4071 /* enable FDI TX PLL too */
4072 temp = I915_READ(fdi_tx_reg);
4073 I915_WRITE(fdi_tx_reg, temp | FDI_TX_PLL_ENABLE);
4074 I915_READ(fdi_tx_reg);
4076 /* enable FDI RX PCDCLK */
4077 temp = I915_READ(fdi_rx_reg);
4078 I915_WRITE(fdi_rx_reg, temp | FDI_SEL_PCDCLK);
4079 I915_READ(fdi_rx_reg);
4084 I915_WRITE(pipeconf_reg, pipeconf);
4085 I915_READ(pipeconf_reg);
4087 intel_wait_for_vblank(dev, pipe);
4089 if (IS_IRONLAKE(dev)) {
4090 /* enable address swizzle for tiling buffer */
4091 temp = I915_READ(DISP_ARB_CTL);
4092 I915_WRITE(DISP_ARB_CTL, temp | DISP_TILE_SURFACE_SWIZZLING);
4095 I915_WRITE(dspcntr_reg, dspcntr);
4097 /* Flush the plane changes */
4098 ret = intel_pipe_set_base(crtc, x, y, old_fb);
4100 intel_update_watermarks(dev);
4102 drm_vblank_post_modeset(dev, pipe);
4107 /** Loads the palette/gamma unit for the CRTC with the prepared values */
4108 void intel_crtc_load_lut(struct drm_crtc *crtc)
4110 struct drm_device *dev = crtc->dev;
4111 struct drm_i915_private *dev_priv = dev->dev_private;
4112 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4113 int palreg = (intel_crtc->pipe == 0) ? PALETTE_A : PALETTE_B;
4116 /* The clocks have to be on to load the palette. */
4120 /* use legacy palette for Ironlake */
4121 if (HAS_PCH_SPLIT(dev))
4122 palreg = (intel_crtc->pipe == 0) ? LGC_PALETTE_A :
4125 for (i = 0; i < 256; i++) {
4126 I915_WRITE(palreg + 4 * i,
4127 (intel_crtc->lut_r[i] << 16) |
4128 (intel_crtc->lut_g[i] << 8) |
4129 intel_crtc->lut_b[i]);
4133 static void i845_update_cursor(struct drm_crtc *crtc, u32 base)
4135 struct drm_device *dev = crtc->dev;
4136 struct drm_i915_private *dev_priv = dev->dev_private;
4137 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4138 bool visible = base != 0;
4141 if (intel_crtc->cursor_visible == visible)
4144 cntl = I915_READ(CURACNTR);
4146 /* On these chipsets we can only modify the base whilst
4147 * the cursor is disabled.
4149 I915_WRITE(CURABASE, base);
4151 cntl &= ~(CURSOR_FORMAT_MASK);
4152 /* XXX width must be 64, stride 256 => 0x00 << 28 */
4153 cntl |= CURSOR_ENABLE |
4154 CURSOR_GAMMA_ENABLE |
4157 cntl &= ~(CURSOR_ENABLE | CURSOR_GAMMA_ENABLE);
4158 I915_WRITE(CURACNTR, cntl);
4160 intel_crtc->cursor_visible = visible;
4163 static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base)
4165 struct drm_device *dev = crtc->dev;
4166 struct drm_i915_private *dev_priv = dev->dev_private;
4167 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4168 int pipe = intel_crtc->pipe;
4169 bool visible = base != 0;
4171 if (intel_crtc->cursor_visible != visible) {
4172 uint32_t cntl = I915_READ(pipe == 0 ? CURACNTR : CURBCNTR);
4174 cntl &= ~(CURSOR_MODE | MCURSOR_PIPE_SELECT);
4175 cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
4176 cntl |= pipe << 28; /* Connect to correct pipe */
4178 cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
4179 cntl |= CURSOR_MODE_DISABLE;
4181 I915_WRITE(pipe == 0 ? CURACNTR : CURBCNTR, cntl);
4183 intel_crtc->cursor_visible = visible;
4185 /* and commit changes on next vblank */
4186 I915_WRITE(pipe == 0 ? CURABASE : CURBBASE, base);
4189 /* If no-part of the cursor is visible on the framebuffer, then the GPU may hang... */
4190 static void intel_crtc_update_cursor(struct drm_crtc *crtc)
4192 struct drm_device *dev = crtc->dev;
4193 struct drm_i915_private *dev_priv = dev->dev_private;
4194 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4195 int pipe = intel_crtc->pipe;
4196 int x = intel_crtc->cursor_x;
4197 int y = intel_crtc->cursor_y;
4203 if (intel_crtc->cursor_on && crtc->fb) {
4204 base = intel_crtc->cursor_addr;
4205 if (x > (int) crtc->fb->width)
4208 if (y > (int) crtc->fb->height)
4214 if (x + intel_crtc->cursor_width < 0)
4217 pos |= CURSOR_POS_SIGN << CURSOR_X_SHIFT;
4220 pos |= x << CURSOR_X_SHIFT;
4223 if (y + intel_crtc->cursor_height < 0)
4226 pos |= CURSOR_POS_SIGN << CURSOR_Y_SHIFT;
4229 pos |= y << CURSOR_Y_SHIFT;
4231 visible = base != 0;
4232 if (!visible && !intel_crtc->cursor_visible)
4235 I915_WRITE(pipe == 0 ? CURAPOS : CURBPOS, pos);
4236 if (IS_845G(dev) || IS_I865G(dev))
4237 i845_update_cursor(crtc, base);
4239 i9xx_update_cursor(crtc, base);
4242 intel_mark_busy(dev, to_intel_framebuffer(crtc->fb)->obj);
4245 static int intel_crtc_cursor_set(struct drm_crtc *crtc,
4246 struct drm_file *file_priv,
4248 uint32_t width, uint32_t height)
4250 struct drm_device *dev = crtc->dev;
4251 struct drm_i915_private *dev_priv = dev->dev_private;
4252 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4253 struct drm_gem_object *bo;
4254 struct drm_i915_gem_object *obj_priv;
4258 DRM_DEBUG_KMS("\n");
4260 /* if we want to turn off the cursor ignore width and height */
4262 DRM_DEBUG_KMS("cursor off\n");
4265 mutex_lock(&dev->struct_mutex);
4269 /* Currently we only support 64x64 cursors */
4270 if (width != 64 || height != 64) {
4271 DRM_ERROR("we currently only support 64x64 cursors\n");
4275 bo = drm_gem_object_lookup(dev, file_priv, handle);
4279 obj_priv = to_intel_bo(bo);
4281 if (bo->size < width * height * 4) {
4282 DRM_ERROR("buffer is to small\n");
4287 /* we only need to pin inside GTT if cursor is non-phy */
4288 mutex_lock(&dev->struct_mutex);
4289 if (!dev_priv->info->cursor_needs_physical) {
4290 ret = i915_gem_object_pin(bo, PAGE_SIZE);
4292 DRM_ERROR("failed to pin cursor bo\n");
4296 ret = i915_gem_object_set_to_gtt_domain(bo, 0);
4298 DRM_ERROR("failed to move cursor bo into the GTT\n");
4302 addr = obj_priv->gtt_offset;
4304 int align = IS_I830(dev) ? 16 * 1024 : 256;
4305 ret = i915_gem_attach_phys_object(dev, bo,
4306 (intel_crtc->pipe == 0) ? I915_GEM_PHYS_CURSOR_0 : I915_GEM_PHYS_CURSOR_1,
4309 DRM_ERROR("failed to attach phys object\n");
4312 addr = obj_priv->phys_obj->handle->busaddr;
4316 I915_WRITE(CURSIZE, (height << 12) | width);
4319 if (intel_crtc->cursor_bo) {
4320 if (dev_priv->info->cursor_needs_physical) {
4321 if (intel_crtc->cursor_bo != bo)
4322 i915_gem_detach_phys_object(dev, intel_crtc->cursor_bo);
4324 i915_gem_object_unpin(intel_crtc->cursor_bo);
4325 drm_gem_object_unreference(intel_crtc->cursor_bo);
4328 mutex_unlock(&dev->struct_mutex);
4330 intel_crtc->cursor_addr = addr;
4331 intel_crtc->cursor_bo = bo;
4332 intel_crtc->cursor_width = width;
4333 intel_crtc->cursor_height = height;
4335 intel_crtc_update_cursor(crtc);
4339 i915_gem_object_unpin(bo);
4341 mutex_unlock(&dev->struct_mutex);
4343 drm_gem_object_unreference_unlocked(bo);
4347 static int intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
4349 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4351 intel_crtc->cursor_x = x;
4352 intel_crtc->cursor_y = y;
4354 intel_crtc_update_cursor(crtc);
4359 /** Sets the color ramps on behalf of RandR */
4360 void intel_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
4361 u16 blue, int regno)
4363 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4365 intel_crtc->lut_r[regno] = red >> 8;
4366 intel_crtc->lut_g[regno] = green >> 8;
4367 intel_crtc->lut_b[regno] = blue >> 8;
4370 void intel_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green,
4371 u16 *blue, int regno)
4373 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4375 *red = intel_crtc->lut_r[regno] << 8;
4376 *green = intel_crtc->lut_g[regno] << 8;
4377 *blue = intel_crtc->lut_b[regno] << 8;
4380 static void intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
4381 u16 *blue, uint32_t start, uint32_t size)
4383 int end = (start + size > 256) ? 256 : start + size, i;
4384 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4386 for (i = start; i < end; i++) {
4387 intel_crtc->lut_r[i] = red[i] >> 8;
4388 intel_crtc->lut_g[i] = green[i] >> 8;
4389 intel_crtc->lut_b[i] = blue[i] >> 8;
4392 intel_crtc_load_lut(crtc);
4396 * Get a pipe with a simple mode set on it for doing load-based monitor
4399 * It will be up to the load-detect code to adjust the pipe as appropriate for
4400 * its requirements. The pipe will be connected to no other encoders.
4402 * Currently this code will only succeed if there is a pipe with no encoders
4403 * configured for it. In the future, it could choose to temporarily disable
4404 * some outputs to free up a pipe for its use.
4406 * \return crtc, or NULL if no pipes are available.
4409 /* VESA 640x480x72Hz mode to set on the pipe */
4410 static struct drm_display_mode load_detect_mode = {
4411 DRM_MODE("640x480", DRM_MODE_TYPE_DEFAULT, 31500, 640, 664,
4412 704, 832, 0, 480, 489, 491, 520, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
4415 struct drm_crtc *intel_get_load_detect_pipe(struct intel_encoder *intel_encoder,
4416 struct drm_connector *connector,
4417 struct drm_display_mode *mode,
4420 struct intel_crtc *intel_crtc;
4421 struct drm_crtc *possible_crtc;
4422 struct drm_crtc *supported_crtc =NULL;
4423 struct drm_encoder *encoder = &intel_encoder->enc;
4424 struct drm_crtc *crtc = NULL;
4425 struct drm_device *dev = encoder->dev;
4426 struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
4427 struct drm_crtc_helper_funcs *crtc_funcs;
4431 * Algorithm gets a little messy:
4432 * - if the connector already has an assigned crtc, use it (but make
4433 * sure it's on first)
4434 * - try to find the first unused crtc that can drive this connector,
4435 * and use that if we find one
4436 * - if there are no unused crtcs available, try to use the first
4437 * one we found that supports the connector
4440 /* See if we already have a CRTC for this connector */
4441 if (encoder->crtc) {
4442 crtc = encoder->crtc;
4443 /* Make sure the crtc and connector are running */
4444 intel_crtc = to_intel_crtc(crtc);
4445 *dpms_mode = intel_crtc->dpms_mode;
4446 if (intel_crtc->dpms_mode != DRM_MODE_DPMS_ON) {
4447 crtc_funcs = crtc->helper_private;
4448 crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
4449 encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);
4454 /* Find an unused one (if possible) */
4455 list_for_each_entry(possible_crtc, &dev->mode_config.crtc_list, head) {
4457 if (!(encoder->possible_crtcs & (1 << i)))
4459 if (!possible_crtc->enabled) {
4460 crtc = possible_crtc;
4463 if (!supported_crtc)
4464 supported_crtc = possible_crtc;
4468 * If we didn't find an unused CRTC, don't use any.
4474 encoder->crtc = crtc;
4475 connector->encoder = encoder;
4476 intel_encoder->load_detect_temp = true;
4478 intel_crtc = to_intel_crtc(crtc);
4479 *dpms_mode = intel_crtc->dpms_mode;
4481 if (!crtc->enabled) {
4483 mode = &load_detect_mode;
4484 drm_crtc_helper_set_mode(crtc, mode, 0, 0, crtc->fb);
4486 if (intel_crtc->dpms_mode != DRM_MODE_DPMS_ON) {
4487 crtc_funcs = crtc->helper_private;
4488 crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
4491 /* Add this connector to the crtc */
4492 encoder_funcs->mode_set(encoder, &crtc->mode, &crtc->mode);
4493 encoder_funcs->commit(encoder);
4495 /* let the connector get through one full cycle before testing */
4496 intel_wait_for_vblank(dev, intel_crtc->pipe);
4501 void intel_release_load_detect_pipe(struct intel_encoder *intel_encoder,
4502 struct drm_connector *connector, int dpms_mode)
4504 struct drm_encoder *encoder = &intel_encoder->enc;
4505 struct drm_device *dev = encoder->dev;
4506 struct drm_crtc *crtc = encoder->crtc;
4507 struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
4508 struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
4510 if (intel_encoder->load_detect_temp) {
4511 encoder->crtc = NULL;
4512 connector->encoder = NULL;
4513 intel_encoder->load_detect_temp = false;
4514 crtc->enabled = drm_helper_crtc_in_use(crtc);
4515 drm_helper_disable_unused_functions(dev);
4518 /* Switch crtc and encoder back off if necessary */
4519 if (crtc->enabled && dpms_mode != DRM_MODE_DPMS_ON) {
4520 if (encoder->crtc == crtc)
4521 encoder_funcs->dpms(encoder, dpms_mode);
4522 crtc_funcs->dpms(crtc, dpms_mode);
4526 /* Returns the clock of the currently programmed mode of the given pipe. */
4527 static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc)
4529 struct drm_i915_private *dev_priv = dev->dev_private;
4530 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4531 int pipe = intel_crtc->pipe;
4532 u32 dpll = I915_READ((pipe == 0) ? DPLL_A : DPLL_B);
4534 intel_clock_t clock;
4536 if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
4537 fp = I915_READ((pipe == 0) ? FPA0 : FPB0);
4539 fp = I915_READ((pipe == 0) ? FPA1 : FPB1);
4541 clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT;
4542 if (IS_PINEVIEW(dev)) {
4543 clock.n = ffs((fp & FP_N_PINEVIEW_DIV_MASK) >> FP_N_DIV_SHIFT) - 1;
4544 clock.m2 = (fp & FP_M2_PINEVIEW_DIV_MASK) >> FP_M2_DIV_SHIFT;
4546 clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT;
4547 clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT;
4551 if (IS_PINEVIEW(dev))
4552 clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW) >>
4553 DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW);
4555 clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK) >>
4556 DPLL_FPA01_P1_POST_DIV_SHIFT);
4558 switch (dpll & DPLL_MODE_MASK) {
4559 case DPLLB_MODE_DAC_SERIAL:
4560 clock.p2 = dpll & DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 ?
4563 case DPLLB_MODE_LVDS:
4564 clock.p2 = dpll & DPLLB_LVDS_P2_CLOCK_DIV_7 ?
4568 DRM_DEBUG_KMS("Unknown DPLL mode %08x in programmed "
4569 "mode\n", (int)(dpll & DPLL_MODE_MASK));
4573 /* XXX: Handle the 100Mhz refclk */
4574 intel_clock(dev, 96000, &clock);
4576 bool is_lvds = (pipe == 1) && (I915_READ(LVDS) & LVDS_PORT_EN);
4579 clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >>
4580 DPLL_FPA01_P1_POST_DIV_SHIFT);
4583 if ((dpll & PLL_REF_INPUT_MASK) ==
4584 PLLB_REF_INPUT_SPREADSPECTRUMIN) {
4585 /* XXX: might not be 66MHz */
4586 intel_clock(dev, 66000, &clock);
4588 intel_clock(dev, 48000, &clock);
4590 if (dpll & PLL_P1_DIVIDE_BY_TWO)
4593 clock.p1 = ((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830) >>
4594 DPLL_FPA01_P1_POST_DIV_SHIFT) + 2;
4596 if (dpll & PLL_P2_DIVIDE_BY_4)
4601 intel_clock(dev, 48000, &clock);
4605 /* XXX: It would be nice to validate the clocks, but we can't reuse
4606 * i830PllIsValid() because it relies on the xf86_config connector
4607 * configuration being accurate, which it isn't necessarily.
4613 /** Returns the currently programmed mode of the given pipe. */
4614 struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
4615 struct drm_crtc *crtc)
4617 struct drm_i915_private *dev_priv = dev->dev_private;
4618 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4619 int pipe = intel_crtc->pipe;
4620 struct drm_display_mode *mode;
4621 int htot = I915_READ((pipe == 0) ? HTOTAL_A : HTOTAL_B);
4622 int hsync = I915_READ((pipe == 0) ? HSYNC_A : HSYNC_B);
4623 int vtot = I915_READ((pipe == 0) ? VTOTAL_A : VTOTAL_B);
4624 int vsync = I915_READ((pipe == 0) ? VSYNC_A : VSYNC_B);
4626 mode = kzalloc(sizeof(*mode), GFP_KERNEL);
4630 mode->clock = intel_crtc_clock_get(dev, crtc);
4631 mode->hdisplay = (htot & 0xffff) + 1;
4632 mode->htotal = ((htot & 0xffff0000) >> 16) + 1;
4633 mode->hsync_start = (hsync & 0xffff) + 1;
4634 mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1;
4635 mode->vdisplay = (vtot & 0xffff) + 1;
4636 mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1;
4637 mode->vsync_start = (vsync & 0xffff) + 1;
4638 mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1;
4640 drm_mode_set_name(mode);
4641 drm_mode_set_crtcinfo(mode, 0);
4646 #define GPU_IDLE_TIMEOUT 500 /* ms */
4648 /* When this timer fires, we've been idle for awhile */
4649 static void intel_gpu_idle_timer(unsigned long arg)
4651 struct drm_device *dev = (struct drm_device *)arg;
4652 drm_i915_private_t *dev_priv = dev->dev_private;
4654 DRM_DEBUG_DRIVER("idle timer fired, downclocking\n");
4656 dev_priv->busy = false;
4658 queue_work(dev_priv->wq, &dev_priv->idle_work);
4661 #define CRTC_IDLE_TIMEOUT 1000 /* ms */
4663 static void intel_crtc_idle_timer(unsigned long arg)
4665 struct intel_crtc *intel_crtc = (struct intel_crtc *)arg;
4666 struct drm_crtc *crtc = &intel_crtc->base;
4667 drm_i915_private_t *dev_priv = crtc->dev->dev_private;
4669 DRM_DEBUG_DRIVER("idle timer fired, downclocking\n");
4671 intel_crtc->busy = false;
4673 queue_work(dev_priv->wq, &dev_priv->idle_work);
4676 static void intel_increase_pllclock(struct drm_crtc *crtc, bool schedule)
4678 struct drm_device *dev = crtc->dev;
4679 drm_i915_private_t *dev_priv = dev->dev_private;
4680 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4681 int pipe = intel_crtc->pipe;
4682 int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
4683 int dpll = I915_READ(dpll_reg);
4685 if (HAS_PCH_SPLIT(dev))
4688 if (!dev_priv->lvds_downclock_avail)
4691 if (!HAS_PIPE_CXSR(dev) && (dpll & DISPLAY_RATE_SELECT_FPA1)) {
4692 DRM_DEBUG_DRIVER("upclocking LVDS\n");
4694 /* Unlock panel regs */
4695 I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) |
4698 dpll &= ~DISPLAY_RATE_SELECT_FPA1;
4699 I915_WRITE(dpll_reg, dpll);
4700 dpll = I915_READ(dpll_reg);
4701 intel_wait_for_vblank(dev, pipe);
4702 dpll = I915_READ(dpll_reg);
4703 if (dpll & DISPLAY_RATE_SELECT_FPA1)
4704 DRM_DEBUG_DRIVER("failed to upclock LVDS!\n");
4706 /* ...and lock them again */
4707 I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) & 0x3);
4710 /* Schedule downclock */
4712 mod_timer(&intel_crtc->idle_timer, jiffies +
4713 msecs_to_jiffies(CRTC_IDLE_TIMEOUT));
4716 static void intel_decrease_pllclock(struct drm_crtc *crtc)
4718 struct drm_device *dev = crtc->dev;
4719 drm_i915_private_t *dev_priv = dev->dev_private;
4720 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4721 int pipe = intel_crtc->pipe;
4722 int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
4723 int dpll = I915_READ(dpll_reg);
4725 if (HAS_PCH_SPLIT(dev))
4728 if (!dev_priv->lvds_downclock_avail)
4732 * Since this is called by a timer, we should never get here in
4735 if (!HAS_PIPE_CXSR(dev) && intel_crtc->lowfreq_avail) {
4736 DRM_DEBUG_DRIVER("downclocking LVDS\n");
4738 /* Unlock panel regs */
4739 I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) |
4742 dpll |= DISPLAY_RATE_SELECT_FPA1;
4743 I915_WRITE(dpll_reg, dpll);
4744 dpll = I915_READ(dpll_reg);
4745 intel_wait_for_vblank(dev, pipe);
4746 dpll = I915_READ(dpll_reg);
4747 if (!(dpll & DISPLAY_RATE_SELECT_FPA1))
4748 DRM_DEBUG_DRIVER("failed to downclock LVDS!\n");
4750 /* ...and lock them again */
4751 I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) & 0x3);
4757 * intel_idle_update - adjust clocks for idleness
4758 * @work: work struct
4760 * Either the GPU or display (or both) went idle. Check the busy status
4761 * here and adjust the CRTC and GPU clocks as necessary.
4763 static void intel_idle_update(struct work_struct *work)
4765 drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
4767 struct drm_device *dev = dev_priv->dev;
4768 struct drm_crtc *crtc;
4769 struct intel_crtc *intel_crtc;
4772 if (!i915_powersave)
4775 mutex_lock(&dev->struct_mutex);
4777 i915_update_gfx_val(dev_priv);
4779 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
4780 /* Skip inactive CRTCs */
4785 intel_crtc = to_intel_crtc(crtc);
4786 if (!intel_crtc->busy)
4787 intel_decrease_pllclock(crtc);
4790 if ((enabled == 1) && (IS_I945G(dev) || IS_I945GM(dev))) {
4791 DRM_DEBUG_DRIVER("enable memory self refresh on 945\n");
4792 I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN_MASK | FW_BLC_SELF_EN);
4795 mutex_unlock(&dev->struct_mutex);
4799 * intel_mark_busy - mark the GPU and possibly the display busy
4801 * @obj: object we're operating on
4803 * Callers can use this function to indicate that the GPU is busy processing
4804 * commands. If @obj matches one of the CRTC objects (i.e. it's a scanout
4805 * buffer), we'll also mark the display as busy, so we know to increase its
4808 void intel_mark_busy(struct drm_device *dev, struct drm_gem_object *obj)
4810 drm_i915_private_t *dev_priv = dev->dev_private;
4811 struct drm_crtc *crtc = NULL;
4812 struct intel_framebuffer *intel_fb;
4813 struct intel_crtc *intel_crtc;
4815 if (!drm_core_check_feature(dev, DRIVER_MODESET))
4818 if (!dev_priv->busy) {
4819 if (IS_I945G(dev) || IS_I945GM(dev)) {
4822 DRM_DEBUG_DRIVER("disable memory self refresh on 945\n");
4823 fw_blc_self = I915_READ(FW_BLC_SELF);
4824 fw_blc_self &= ~FW_BLC_SELF_EN;
4825 I915_WRITE(FW_BLC_SELF, fw_blc_self | FW_BLC_SELF_EN_MASK);
4827 dev_priv->busy = true;
4829 mod_timer(&dev_priv->idle_timer, jiffies +
4830 msecs_to_jiffies(GPU_IDLE_TIMEOUT));
4832 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
4836 intel_crtc = to_intel_crtc(crtc);
4837 intel_fb = to_intel_framebuffer(crtc->fb);
4838 if (intel_fb->obj == obj) {
4839 if (!intel_crtc->busy) {
4840 if (IS_I945G(dev) || IS_I945GM(dev)) {
4843 DRM_DEBUG_DRIVER("disable memory self refresh on 945\n");
4844 fw_blc_self = I915_READ(FW_BLC_SELF);
4845 fw_blc_self &= ~FW_BLC_SELF_EN;
4846 I915_WRITE(FW_BLC_SELF, fw_blc_self | FW_BLC_SELF_EN_MASK);
4848 /* Non-busy -> busy, upclock */
4849 intel_increase_pllclock(crtc, true);
4850 intel_crtc->busy = true;
4852 /* Busy -> busy, put off timer */
4853 mod_timer(&intel_crtc->idle_timer, jiffies +
4854 msecs_to_jiffies(CRTC_IDLE_TIMEOUT));
4860 static void intel_crtc_destroy(struct drm_crtc *crtc)
4862 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4864 drm_crtc_cleanup(crtc);
4868 struct intel_unpin_work {
4869 struct work_struct work;
4870 struct drm_device *dev;
4871 struct drm_gem_object *old_fb_obj;
4872 struct drm_gem_object *pending_flip_obj;
4873 struct drm_pending_vblank_event *event;
4877 static void intel_unpin_work_fn(struct work_struct *__work)
4879 struct intel_unpin_work *work =
4880 container_of(__work, struct intel_unpin_work, work);
4882 mutex_lock(&work->dev->struct_mutex);
4883 i915_gem_object_unpin(work->old_fb_obj);
4884 drm_gem_object_unreference(work->pending_flip_obj);
4885 drm_gem_object_unreference(work->old_fb_obj);
4886 mutex_unlock(&work->dev->struct_mutex);
4890 static void do_intel_finish_page_flip(struct drm_device *dev,
4891 struct drm_crtc *crtc)
4893 drm_i915_private_t *dev_priv = dev->dev_private;
4894 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4895 struct intel_unpin_work *work;
4896 struct drm_i915_gem_object *obj_priv;
4897 struct drm_pending_vblank_event *e;
4899 unsigned long flags;
4901 /* Ignore early vblank irqs */
4902 if (intel_crtc == NULL)
4905 spin_lock_irqsave(&dev->event_lock, flags);
4906 work = intel_crtc->unpin_work;
4907 if (work == NULL || !work->pending) {
4908 spin_unlock_irqrestore(&dev->event_lock, flags);
4912 intel_crtc->unpin_work = NULL;
4913 drm_vblank_put(dev, intel_crtc->pipe);
4917 do_gettimeofday(&now);
4918 e->event.sequence = drm_vblank_count(dev, intel_crtc->pipe);
4919 e->event.tv_sec = now.tv_sec;
4920 e->event.tv_usec = now.tv_usec;
4921 list_add_tail(&e->base.link,
4922 &e->base.file_priv->event_list);
4923 wake_up_interruptible(&e->base.file_priv->event_wait);
4926 spin_unlock_irqrestore(&dev->event_lock, flags);
4928 obj_priv = to_intel_bo(work->pending_flip_obj);
4930 /* Initial scanout buffer will have a 0 pending flip count */
4931 if ((atomic_read(&obj_priv->pending_flip) == 0) ||
4932 atomic_dec_and_test(&obj_priv->pending_flip))
4933 DRM_WAKEUP(&dev_priv->pending_flip_queue);
4934 schedule_work(&work->work);
4936 trace_i915_flip_complete(intel_crtc->plane, work->pending_flip_obj);
4939 void intel_finish_page_flip(struct drm_device *dev, int pipe)
4941 drm_i915_private_t *dev_priv = dev->dev_private;
4942 struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
4944 do_intel_finish_page_flip(dev, crtc);
4947 void intel_finish_page_flip_plane(struct drm_device *dev, int plane)
4949 drm_i915_private_t *dev_priv = dev->dev_private;
4950 struct drm_crtc *crtc = dev_priv->plane_to_crtc_mapping[plane];
4952 do_intel_finish_page_flip(dev, crtc);
4955 void intel_prepare_page_flip(struct drm_device *dev, int plane)
4957 drm_i915_private_t *dev_priv = dev->dev_private;
4958 struct intel_crtc *intel_crtc =
4959 to_intel_crtc(dev_priv->plane_to_crtc_mapping[plane]);
4960 unsigned long flags;
4962 spin_lock_irqsave(&dev->event_lock, flags);
4963 if (intel_crtc->unpin_work) {
4964 intel_crtc->unpin_work->pending = 1;
4966 DRM_DEBUG_DRIVER("preparing flip with no unpin work?\n");
4968 spin_unlock_irqrestore(&dev->event_lock, flags);
4971 static int intel_crtc_page_flip(struct drm_crtc *crtc,
4972 struct drm_framebuffer *fb,
4973 struct drm_pending_vblank_event *event)
4975 struct drm_device *dev = crtc->dev;
4976 struct drm_i915_private *dev_priv = dev->dev_private;
4977 struct intel_framebuffer *intel_fb;
4978 struct drm_i915_gem_object *obj_priv;
4979 struct drm_gem_object *obj;
4980 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4981 struct intel_unpin_work *work;
4982 unsigned long flags, offset;
4983 int pipe = intel_crtc->pipe;
4987 work = kzalloc(sizeof *work, GFP_KERNEL);
4991 work->event = event;
4992 work->dev = crtc->dev;
4993 intel_fb = to_intel_framebuffer(crtc->fb);
4994 work->old_fb_obj = intel_fb->obj;
4995 INIT_WORK(&work->work, intel_unpin_work_fn);
4997 /* We borrow the event spin lock for protecting unpin_work */
4998 spin_lock_irqsave(&dev->event_lock, flags);
4999 if (intel_crtc->unpin_work) {
5000 spin_unlock_irqrestore(&dev->event_lock, flags);
5003 DRM_DEBUG_DRIVER("flip queue: crtc already busy\n");
5006 intel_crtc->unpin_work = work;
5007 spin_unlock_irqrestore(&dev->event_lock, flags);
5009 intel_fb = to_intel_framebuffer(fb);
5010 obj = intel_fb->obj;
5012 mutex_lock(&dev->struct_mutex);
5013 ret = intel_pin_and_fence_fb_obj(dev, obj);
5017 /* Reference the objects for the scheduled work. */
5018 drm_gem_object_reference(work->old_fb_obj);
5019 drm_gem_object_reference(obj);
5022 ret = i915_gem_object_flush_write_domain(obj);
5026 ret = drm_vblank_get(dev, intel_crtc->pipe);
5030 obj_priv = to_intel_bo(obj);
5031 atomic_inc(&obj_priv->pending_flip);
5032 work->pending_flip_obj = obj;
5034 if (IS_GEN3(dev) || IS_GEN2(dev)) {
5037 if (intel_crtc->plane)
5038 flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
5040 flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
5043 OUT_RING(MI_WAIT_FOR_EVENT | flip_mask);
5048 /* Offset into the new buffer for cases of shared fbs between CRTCs */
5049 offset = crtc->y * fb->pitch + crtc->x * fb->bits_per_pixel/8;
5052 switch(INTEL_INFO(dev)->gen) {
5054 OUT_RING(MI_DISPLAY_FLIP |
5055 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
5056 OUT_RING(fb->pitch);
5057 OUT_RING(obj_priv->gtt_offset + offset);
5062 OUT_RING(MI_DISPLAY_FLIP_I915 |
5063 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
5064 OUT_RING(fb->pitch);
5065 OUT_RING(obj_priv->gtt_offset + offset);
5071 /* i965+ uses the linear or tiled offsets from the
5072 * Display Registers (which do not change across a page-flip)
5073 * so we need only reprogram the base address.
5075 OUT_RING(MI_DISPLAY_FLIP |
5076 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
5077 OUT_RING(fb->pitch);
5078 OUT_RING(obj_priv->gtt_offset | obj_priv->tiling_mode);
5080 /* XXX Enabling the panel-fitter across page-flip is so far
5081 * untested on non-native modes, so ignore it for now.
5082 * pf = I915_READ(pipe == 0 ? PFA_CTL_1 : PFB_CTL_1) & PF_ENABLE;
5085 pipesrc = I915_READ(pipe == 0 ? PIPEASRC : PIPEBSRC) & 0x0fff0fff;
5086 OUT_RING(pf | pipesrc);
5090 OUT_RING(MI_DISPLAY_FLIP |
5091 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
5092 OUT_RING(fb->pitch | obj_priv->tiling_mode);
5093 OUT_RING(obj_priv->gtt_offset);
5095 pf = I915_READ(pipe == 0 ? PFA_CTL_1 : PFB_CTL_1) & PF_ENABLE;
5096 pipesrc = I915_READ(pipe == 0 ? PIPEASRC : PIPEBSRC) & 0x0fff0fff;
5097 OUT_RING(pf | pipesrc);
5102 mutex_unlock(&dev->struct_mutex);
5104 trace_i915_flip_request(intel_crtc->plane, obj);
5109 drm_gem_object_unreference(work->old_fb_obj);
5110 drm_gem_object_unreference(obj);
5112 mutex_unlock(&dev->struct_mutex);
5114 spin_lock_irqsave(&dev->event_lock, flags);
5115 intel_crtc->unpin_work = NULL;
5116 spin_unlock_irqrestore(&dev->event_lock, flags);
5123 static const struct drm_crtc_helper_funcs intel_helper_funcs = {
5124 .dpms = intel_crtc_dpms,
5125 .mode_fixup = intel_crtc_mode_fixup,
5126 .mode_set = intel_crtc_mode_set,
5127 .mode_set_base = intel_pipe_set_base,
5128 .mode_set_base_atomic = intel_pipe_set_base_atomic,
5129 .prepare = intel_crtc_prepare,
5130 .commit = intel_crtc_commit,
5131 .load_lut = intel_crtc_load_lut,
5134 static const struct drm_crtc_funcs intel_crtc_funcs = {
5135 .cursor_set = intel_crtc_cursor_set,
5136 .cursor_move = intel_crtc_cursor_move,
5137 .gamma_set = intel_crtc_gamma_set,
5138 .set_config = drm_crtc_helper_set_config,
5139 .destroy = intel_crtc_destroy,
5140 .page_flip = intel_crtc_page_flip,
5144 static void intel_crtc_init(struct drm_device *dev, int pipe)
5146 drm_i915_private_t *dev_priv = dev->dev_private;
5147 struct intel_crtc *intel_crtc;
5150 intel_crtc = kzalloc(sizeof(struct intel_crtc) + (INTELFB_CONN_LIMIT * sizeof(struct drm_connector *)), GFP_KERNEL);
5151 if (intel_crtc == NULL)
5154 drm_crtc_init(dev, &intel_crtc->base, &intel_crtc_funcs);
5156 drm_mode_crtc_set_gamma_size(&intel_crtc->base, 256);
5157 intel_crtc->pipe = pipe;
5158 intel_crtc->plane = pipe;
5159 for (i = 0; i < 256; i++) {
5160 intel_crtc->lut_r[i] = i;
5161 intel_crtc->lut_g[i] = i;
5162 intel_crtc->lut_b[i] = i;
5165 /* Swap pipes & planes for FBC on pre-965 */
5166 intel_crtc->pipe = pipe;
5167 intel_crtc->plane = pipe;
5168 if (IS_MOBILE(dev) && (IS_I9XX(dev) && !IS_I965G(dev))) {
5169 DRM_DEBUG_KMS("swapping pipes & planes for FBC\n");
5170 intel_crtc->plane = ((pipe == 0) ? 1 : 0);
5173 BUG_ON(pipe >= ARRAY_SIZE(dev_priv->plane_to_crtc_mapping) ||
5174 dev_priv->plane_to_crtc_mapping[intel_crtc->plane] != NULL);
5175 dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base;
5176 dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base;
5178 intel_crtc->cursor_addr = 0;
5179 intel_crtc->dpms_mode = DRM_MODE_DPMS_OFF;
5180 drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs);
5182 intel_crtc->busy = false;
5184 setup_timer(&intel_crtc->idle_timer, intel_crtc_idle_timer,
5185 (unsigned long)intel_crtc);
5188 int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
5189 struct drm_file *file_priv)
5191 drm_i915_private_t *dev_priv = dev->dev_private;
5192 struct drm_i915_get_pipe_from_crtc_id *pipe_from_crtc_id = data;
5193 struct drm_mode_object *drmmode_obj;
5194 struct intel_crtc *crtc;
5197 DRM_ERROR("called with no initialization\n");
5201 drmmode_obj = drm_mode_object_find(dev, pipe_from_crtc_id->crtc_id,
5202 DRM_MODE_OBJECT_CRTC);
5205 DRM_ERROR("no such CRTC id\n");
5209 crtc = to_intel_crtc(obj_to_crtc(drmmode_obj));
5210 pipe_from_crtc_id->pipe = crtc->pipe;
5215 struct drm_crtc *intel_get_crtc_from_pipe(struct drm_device *dev, int pipe)
5217 struct drm_crtc *crtc = NULL;
5219 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
5220 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5221 if (intel_crtc->pipe == pipe)
5227 static int intel_encoder_clones(struct drm_device *dev, int type_mask)
5230 struct drm_encoder *encoder;
5233 list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
5234 struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
5235 if (type_mask & intel_encoder->clone_mask)
5236 index_mask |= (1 << entry);
5243 static void intel_setup_outputs(struct drm_device *dev)
5245 struct drm_i915_private *dev_priv = dev->dev_private;
5246 struct drm_encoder *encoder;
5247 bool dpd_is_edp = false;
5249 if (IS_MOBILE(dev) && !IS_I830(dev))
5250 intel_lvds_init(dev);
5252 if (HAS_PCH_SPLIT(dev)) {
5253 dpd_is_edp = intel_dpd_is_edp(dev);
5255 if (IS_MOBILE(dev) && (I915_READ(DP_A) & DP_DETECTED))
5256 intel_dp_init(dev, DP_A);
5258 if (dpd_is_edp && (I915_READ(PCH_DP_D) & DP_DETECTED))
5259 intel_dp_init(dev, PCH_DP_D);
5262 intel_crt_init(dev);
5264 if (HAS_PCH_SPLIT(dev)) {
5267 if (I915_READ(HDMIB) & PORT_DETECTED) {
5268 /* PCH SDVOB multiplex with HDMIB */
5269 found = intel_sdvo_init(dev, PCH_SDVOB);
5271 intel_hdmi_init(dev, HDMIB);
5272 if (!found && (I915_READ(PCH_DP_B) & DP_DETECTED))
5273 intel_dp_init(dev, PCH_DP_B);
5276 if (I915_READ(HDMIC) & PORT_DETECTED)
5277 intel_hdmi_init(dev, HDMIC);
5279 if (I915_READ(HDMID) & PORT_DETECTED)
5280 intel_hdmi_init(dev, HDMID);
5282 if (I915_READ(PCH_DP_C) & DP_DETECTED)
5283 intel_dp_init(dev, PCH_DP_C);
5285 if (!dpd_is_edp && (I915_READ(PCH_DP_D) & DP_DETECTED))
5286 intel_dp_init(dev, PCH_DP_D);
5288 } else if (SUPPORTS_DIGITAL_OUTPUTS(dev)) {
5291 if (I915_READ(SDVOB) & SDVO_DETECTED) {
5292 DRM_DEBUG_KMS("probing SDVOB\n");
5293 found = intel_sdvo_init(dev, SDVOB);
5294 if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) {
5295 DRM_DEBUG_KMS("probing HDMI on SDVOB\n");
5296 intel_hdmi_init(dev, SDVOB);
5299 if (!found && SUPPORTS_INTEGRATED_DP(dev)) {
5300 DRM_DEBUG_KMS("probing DP_B\n");
5301 intel_dp_init(dev, DP_B);
5305 /* Before G4X SDVOC doesn't have its own detect register */
5307 if (I915_READ(SDVOB) & SDVO_DETECTED) {
5308 DRM_DEBUG_KMS("probing SDVOC\n");
5309 found = intel_sdvo_init(dev, SDVOC);
5312 if (!found && (I915_READ(SDVOC) & SDVO_DETECTED)) {
5314 if (SUPPORTS_INTEGRATED_HDMI(dev)) {
5315 DRM_DEBUG_KMS("probing HDMI on SDVOC\n");
5316 intel_hdmi_init(dev, SDVOC);
5318 if (SUPPORTS_INTEGRATED_DP(dev)) {
5319 DRM_DEBUG_KMS("probing DP_C\n");
5320 intel_dp_init(dev, DP_C);
5324 if (SUPPORTS_INTEGRATED_DP(dev) &&
5325 (I915_READ(DP_D) & DP_DETECTED)) {
5326 DRM_DEBUG_KMS("probing DP_D\n");
5327 intel_dp_init(dev, DP_D);
5329 } else if (IS_GEN2(dev))
5330 intel_dvo_init(dev);
5332 if (SUPPORTS_TV(dev))
5335 list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
5336 struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
5338 encoder->possible_crtcs = intel_encoder->crtc_mask;
5339 encoder->possible_clones = intel_encoder_clones(dev,
5340 intel_encoder->clone_mask);
5344 static void intel_user_framebuffer_destroy(struct drm_framebuffer *fb)
5346 struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
5348 drm_framebuffer_cleanup(fb);
5349 drm_gem_object_unreference_unlocked(intel_fb->obj);
5354 static int intel_user_framebuffer_create_handle(struct drm_framebuffer *fb,
5355 struct drm_file *file_priv,
5356 unsigned int *handle)
5358 struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
5359 struct drm_gem_object *object = intel_fb->obj;
5361 return drm_gem_handle_create(file_priv, object, handle);
5364 static const struct drm_framebuffer_funcs intel_fb_funcs = {
5365 .destroy = intel_user_framebuffer_destroy,
5366 .create_handle = intel_user_framebuffer_create_handle,
5369 int intel_framebuffer_init(struct drm_device *dev,
5370 struct intel_framebuffer *intel_fb,
5371 struct drm_mode_fb_cmd *mode_cmd,
5372 struct drm_gem_object *obj)
5376 ret = drm_framebuffer_init(dev, &intel_fb->base, &intel_fb_funcs);
5378 DRM_ERROR("framebuffer init failed %d\n", ret);
5382 drm_helper_mode_fill_fb_struct(&intel_fb->base, mode_cmd);
5383 intel_fb->obj = obj;
5387 static struct drm_framebuffer *
5388 intel_user_framebuffer_create(struct drm_device *dev,
5389 struct drm_file *filp,
5390 struct drm_mode_fb_cmd *mode_cmd)
5392 struct drm_gem_object *obj;
5393 struct intel_framebuffer *intel_fb;
5396 obj = drm_gem_object_lookup(dev, filp, mode_cmd->handle);
5398 return ERR_PTR(-ENOENT);
5400 intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
5402 return ERR_PTR(-ENOMEM);
5404 ret = intel_framebuffer_init(dev, intel_fb,
5407 drm_gem_object_unreference_unlocked(obj);
5409 return ERR_PTR(ret);
5412 return &intel_fb->base;
5415 static const struct drm_mode_config_funcs intel_mode_funcs = {
5416 .fb_create = intel_user_framebuffer_create,
5417 .output_poll_changed = intel_fb_output_poll_changed,
5420 static struct drm_gem_object *
5421 intel_alloc_context_page(struct drm_device *dev)
5423 struct drm_gem_object *ctx;
5426 ctx = i915_gem_alloc_object(dev, 4096);
5428 DRM_DEBUG("failed to alloc power context, RC6 disabled\n");
5432 mutex_lock(&dev->struct_mutex);
5433 ret = i915_gem_object_pin(ctx, 4096);
5435 DRM_ERROR("failed to pin power context: %d\n", ret);
5439 ret = i915_gem_object_set_to_gtt_domain(ctx, 1);
5441 DRM_ERROR("failed to set-domain on power context: %d\n", ret);
5444 mutex_unlock(&dev->struct_mutex);
5449 i915_gem_object_unpin(ctx);
5451 drm_gem_object_unreference(ctx);
5452 mutex_unlock(&dev->struct_mutex);
5456 bool ironlake_set_drps(struct drm_device *dev, u8 val)
5458 struct drm_i915_private *dev_priv = dev->dev_private;
5461 rgvswctl = I915_READ16(MEMSWCTL);
5462 if (rgvswctl & MEMCTL_CMD_STS) {
5463 DRM_DEBUG("gpu busy, RCS change rejected\n");
5464 return false; /* still busy with another command */
5467 rgvswctl = (MEMCTL_CMD_CHFREQ << MEMCTL_CMD_SHIFT) |
5468 (val << MEMCTL_FREQ_SHIFT) | MEMCTL_SFCAVM;
5469 I915_WRITE16(MEMSWCTL, rgvswctl);
5470 POSTING_READ16(MEMSWCTL);
5472 rgvswctl |= MEMCTL_CMD_STS;
5473 I915_WRITE16(MEMSWCTL, rgvswctl);
5478 void ironlake_enable_drps(struct drm_device *dev)
5480 struct drm_i915_private *dev_priv = dev->dev_private;
5481 u32 rgvmodectl = I915_READ(MEMMODECTL);
5482 u8 fmax, fmin, fstart, vstart;
5484 /* 100ms RC evaluation intervals */
5485 I915_WRITE(RCUPEI, 100000);
5486 I915_WRITE(RCDNEI, 100000);
5488 /* Set max/min thresholds to 90ms and 80ms respectively */
5489 I915_WRITE(RCBMAXAVG, 90000);
5490 I915_WRITE(RCBMINAVG, 80000);
5492 I915_WRITE(MEMIHYST, 1);
5494 /* Set up min, max, and cur for interrupt handling */
5495 fmax = (rgvmodectl & MEMMODE_FMAX_MASK) >> MEMMODE_FMAX_SHIFT;
5496 fmin = (rgvmodectl & MEMMODE_FMIN_MASK);
5497 fstart = (rgvmodectl & MEMMODE_FSTART_MASK) >>
5498 MEMMODE_FSTART_SHIFT;
5501 vstart = (I915_READ(PXVFREQ_BASE + (fstart * 4)) & PXVFREQ_PX_MASK) >>
5504 dev_priv->fmax = fstart; /* IPS callback will increase this */
5505 dev_priv->fstart = fstart;
5507 dev_priv->max_delay = fmax;
5508 dev_priv->min_delay = fmin;
5509 dev_priv->cur_delay = fstart;
5511 DRM_DEBUG_DRIVER("fmax: %d, fmin: %d, fstart: %d\n", fmax, fmin,
5514 I915_WRITE(MEMINTREN, MEMINT_CX_SUPR_EN | MEMINT_EVAL_CHG_EN);
5517 * Interrupts will be enabled in ironlake_irq_postinstall
5520 I915_WRITE(VIDSTART, vstart);
5521 POSTING_READ(VIDSTART);
5523 rgvmodectl |= MEMMODE_SWMODE_EN;
5524 I915_WRITE(MEMMODECTL, rgvmodectl);
5526 if (wait_for((I915_READ(MEMSWCTL) & MEMCTL_CMD_STS) == 0, 1, 0))
5527 DRM_ERROR("stuck trying to change perf mode\n");
5530 ironlake_set_drps(dev, fstart);
5532 dev_priv->last_count1 = I915_READ(0x112e4) + I915_READ(0x112e8) +
5534 dev_priv->last_time1 = jiffies_to_msecs(jiffies);
5535 dev_priv->last_count2 = I915_READ(0x112f4);
5536 getrawmonotonic(&dev_priv->last_time2);
5539 void ironlake_disable_drps(struct drm_device *dev)
5541 struct drm_i915_private *dev_priv = dev->dev_private;
5542 u16 rgvswctl = I915_READ16(MEMSWCTL);
5544 /* Ack interrupts, disable EFC interrupt */
5545 I915_WRITE(MEMINTREN, I915_READ(MEMINTREN) & ~MEMINT_EVAL_CHG_EN);
5546 I915_WRITE(MEMINTRSTS, MEMINT_EVAL_CHG);
5547 I915_WRITE(DEIER, I915_READ(DEIER) & ~DE_PCU_EVENT);
5548 I915_WRITE(DEIIR, DE_PCU_EVENT);
5549 I915_WRITE(DEIMR, I915_READ(DEIMR) | DE_PCU_EVENT);
5551 /* Go back to the starting frequency */
5552 ironlake_set_drps(dev, dev_priv->fstart);
5554 rgvswctl |= MEMCTL_CMD_STS;
5555 I915_WRITE(MEMSWCTL, rgvswctl);
5560 static unsigned long intel_pxfreq(u32 vidfreq)
5563 int div = (vidfreq & 0x3f0000) >> 16;
5564 int post = (vidfreq & 0x3000) >> 12;
5565 int pre = (vidfreq & 0x7);
5570 freq = ((div * 133333) / ((1<<post) * pre));
5575 void intel_init_emon(struct drm_device *dev)
5577 struct drm_i915_private *dev_priv = dev->dev_private;
5582 /* Disable to program */
5586 /* Program energy weights for various events */
5587 I915_WRITE(SDEW, 0x15040d00);
5588 I915_WRITE(CSIEW0, 0x007f0000);
5589 I915_WRITE(CSIEW1, 0x1e220004);
5590 I915_WRITE(CSIEW2, 0x04000004);
5592 for (i = 0; i < 5; i++)
5593 I915_WRITE(PEW + (i * 4), 0);
5594 for (i = 0; i < 3; i++)
5595 I915_WRITE(DEW + (i * 4), 0);
5597 /* Program P-state weights to account for frequency power adjustment */
5598 for (i = 0; i < 16; i++) {
5599 u32 pxvidfreq = I915_READ(PXVFREQ_BASE + (i * 4));
5600 unsigned long freq = intel_pxfreq(pxvidfreq);
5601 unsigned long vid = (pxvidfreq & PXVFREQ_PX_MASK) >>
5606 val *= (freq / 1000);
5608 val /= (127*127*900);
5610 DRM_ERROR("bad pxval: %ld\n", val);
5613 /* Render standby states get 0 weight */
5617 for (i = 0; i < 4; i++) {
5618 u32 val = (pxw[i*4] << 24) | (pxw[(i*4)+1] << 16) |
5619 (pxw[(i*4)+2] << 8) | (pxw[(i*4)+3]);
5620 I915_WRITE(PXW + (i * 4), val);
5623 /* Adjust magic regs to magic values (more experimental results) */
5624 I915_WRITE(OGW0, 0);
5625 I915_WRITE(OGW1, 0);
5626 I915_WRITE(EG0, 0x00007f00);
5627 I915_WRITE(EG1, 0x0000000e);
5628 I915_WRITE(EG2, 0x000e0000);
5629 I915_WRITE(EG3, 0x68000300);
5630 I915_WRITE(EG4, 0x42000000);
5631 I915_WRITE(EG5, 0x00140031);
5635 for (i = 0; i < 8; i++)
5636 I915_WRITE(PXWL + (i * 4), 0);
5638 /* Enable PMON + select events */
5639 I915_WRITE(ECR, 0x80000019);
5641 lcfuse = I915_READ(LCFUSE02);
5643 dev_priv->corr = (lcfuse & LCFUSE_HIV_MASK);
5646 void intel_init_clock_gating(struct drm_device *dev)
5648 struct drm_i915_private *dev_priv = dev->dev_private;
5651 * Disable clock gating reported to work incorrectly according to the
5652 * specs, but enable as much else as we can.
5654 if (HAS_PCH_SPLIT(dev)) {
5655 uint32_t dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE;
5657 if (IS_IRONLAKE(dev)) {
5658 /* Required for FBC */
5659 dspclk_gate |= DPFDUNIT_CLOCK_GATE_DISABLE;
5660 /* Required for CxSR */
5661 dspclk_gate |= DPARBUNIT_CLOCK_GATE_DISABLE;
5663 I915_WRITE(PCH_3DCGDIS0,
5664 MARIUNIT_CLOCK_GATE_DISABLE |
5665 SVSMUNIT_CLOCK_GATE_DISABLE);
5668 I915_WRITE(PCH_DSPCLK_GATE_D, dspclk_gate);
5671 * According to the spec the following bits should be set in
5672 * order to enable memory self-refresh
5673 * The bit 22/21 of 0x42004
5674 * The bit 5 of 0x42020
5675 * The bit 15 of 0x45000
5677 if (IS_IRONLAKE(dev)) {
5678 I915_WRITE(ILK_DISPLAY_CHICKEN2,
5679 (I915_READ(ILK_DISPLAY_CHICKEN2) |
5680 ILK_DPARB_GATE | ILK_VSDPFD_FULL));
5681 I915_WRITE(ILK_DSPCLK_GATE,
5682 (I915_READ(ILK_DSPCLK_GATE) |
5683 ILK_DPARB_CLK_GATE));
5684 I915_WRITE(DISP_ARB_CTL,
5685 (I915_READ(DISP_ARB_CTL) |
5689 * Based on the document from hardware guys the following bits
5690 * should be set unconditionally in order to enable FBC.
5691 * The bit 22 of 0x42000
5692 * The bit 22 of 0x42004
5693 * The bit 7,8,9 of 0x42020.
5695 if (IS_IRONLAKE_M(dev)) {
5696 I915_WRITE(ILK_DISPLAY_CHICKEN1,
5697 I915_READ(ILK_DISPLAY_CHICKEN1) |
5699 I915_WRITE(ILK_DISPLAY_CHICKEN2,
5700 I915_READ(ILK_DISPLAY_CHICKEN2) |
5702 I915_WRITE(ILK_DSPCLK_GATE,
5703 I915_READ(ILK_DSPCLK_GATE) |
5710 } else if (IS_G4X(dev)) {
5711 uint32_t dspclk_gate;
5712 I915_WRITE(RENCLK_GATE_D1, 0);
5713 I915_WRITE(RENCLK_GATE_D2, VF_UNIT_CLOCK_GATE_DISABLE |
5714 GS_UNIT_CLOCK_GATE_DISABLE |
5715 CL_UNIT_CLOCK_GATE_DISABLE);
5716 I915_WRITE(RAMCLK_GATE_D, 0);
5717 dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE |
5718 OVRUNIT_CLOCK_GATE_DISABLE |
5719 OVCUNIT_CLOCK_GATE_DISABLE;
5721 dspclk_gate |= DSSUNIT_CLOCK_GATE_DISABLE;
5722 I915_WRITE(DSPCLK_GATE_D, dspclk_gate);
5723 } else if (IS_I965GM(dev)) {
5724 I915_WRITE(RENCLK_GATE_D1, I965_RCC_CLOCK_GATE_DISABLE);
5725 I915_WRITE(RENCLK_GATE_D2, 0);
5726 I915_WRITE(DSPCLK_GATE_D, 0);
5727 I915_WRITE(RAMCLK_GATE_D, 0);
5728 I915_WRITE16(DEUC, 0);
5729 } else if (IS_I965G(dev)) {
5730 I915_WRITE(RENCLK_GATE_D1, I965_RCZ_CLOCK_GATE_DISABLE |
5731 I965_RCC_CLOCK_GATE_DISABLE |
5732 I965_RCPB_CLOCK_GATE_DISABLE |
5733 I965_ISC_CLOCK_GATE_DISABLE |
5734 I965_FBC_CLOCK_GATE_DISABLE);
5735 I915_WRITE(RENCLK_GATE_D2, 0);
5736 } else if (IS_I9XX(dev)) {
5737 u32 dstate = I915_READ(D_STATE);
5739 dstate |= DSTATE_PLL_D3_OFF | DSTATE_GFX_CLOCK_GATING |
5740 DSTATE_DOT_CLOCK_GATING;
5741 I915_WRITE(D_STATE, dstate);
5742 } else if (IS_I85X(dev) || IS_I865G(dev)) {
5743 I915_WRITE(RENCLK_GATE_D1, SV_CLOCK_GATE_DISABLE);
5744 } else if (IS_I830(dev)) {
5745 I915_WRITE(DSPCLK_GATE_D, OVRUNIT_CLOCK_GATE_DISABLE);
5749 * GPU can automatically power down the render unit if given a page
5752 if (IS_IRONLAKE_M(dev)) {
5753 if (dev_priv->renderctx == NULL)
5754 dev_priv->renderctx = intel_alloc_context_page(dev);
5755 if (dev_priv->renderctx) {
5756 struct drm_i915_gem_object *obj_priv;
5757 obj_priv = to_intel_bo(dev_priv->renderctx);
5760 OUT_RING(MI_SET_CONTEXT);
5761 OUT_RING(obj_priv->gtt_offset |
5763 MI_SAVE_EXT_STATE_EN |
5764 MI_RESTORE_EXT_STATE_EN |
5765 MI_RESTORE_INHIBIT);
5771 DRM_DEBUG_KMS("Failed to allocate render context."
5777 if (I915_HAS_RC6(dev) && drm_core_check_feature(dev, DRIVER_MODESET)) {
5778 struct drm_i915_gem_object *obj_priv = NULL;
5780 if (dev_priv->pwrctx) {
5781 obj_priv = to_intel_bo(dev_priv->pwrctx);
5783 struct drm_gem_object *pwrctx;
5785 pwrctx = intel_alloc_context_page(dev);
5787 dev_priv->pwrctx = pwrctx;
5788 obj_priv = to_intel_bo(pwrctx);
5793 I915_WRITE(PWRCTXA, obj_priv->gtt_offset | PWRCTX_EN);
5794 I915_WRITE(MCHBAR_RENDER_STANDBY,
5795 I915_READ(MCHBAR_RENDER_STANDBY) & ~RCX_SW_EXIT);
5800 /* Set up chip specific display functions */
5801 static void intel_init_display(struct drm_device *dev)
5803 struct drm_i915_private *dev_priv = dev->dev_private;
5805 /* We always want a DPMS function */
5806 if (HAS_PCH_SPLIT(dev))
5807 dev_priv->display.dpms = ironlake_crtc_dpms;
5809 dev_priv->display.dpms = i9xx_crtc_dpms;
5811 if (I915_HAS_FBC(dev)) {
5812 if (IS_IRONLAKE_M(dev)) {
5813 dev_priv->display.fbc_enabled = ironlake_fbc_enabled;
5814 dev_priv->display.enable_fbc = ironlake_enable_fbc;
5815 dev_priv->display.disable_fbc = ironlake_disable_fbc;
5816 } else if (IS_GM45(dev)) {
5817 dev_priv->display.fbc_enabled = g4x_fbc_enabled;
5818 dev_priv->display.enable_fbc = g4x_enable_fbc;
5819 dev_priv->display.disable_fbc = g4x_disable_fbc;
5820 } else if (IS_I965GM(dev)) {
5821 dev_priv->display.fbc_enabled = i8xx_fbc_enabled;
5822 dev_priv->display.enable_fbc = i8xx_enable_fbc;
5823 dev_priv->display.disable_fbc = i8xx_disable_fbc;
5825 /* 855GM needs testing */
5828 /* Returns the core display clock speed */
5829 if (IS_I945G(dev) || (IS_G33(dev) && ! IS_PINEVIEW_M(dev)))
5830 dev_priv->display.get_display_clock_speed =
5831 i945_get_display_clock_speed;
5832 else if (IS_I915G(dev))
5833 dev_priv->display.get_display_clock_speed =
5834 i915_get_display_clock_speed;
5835 else if (IS_I945GM(dev) || IS_845G(dev) || IS_PINEVIEW_M(dev))
5836 dev_priv->display.get_display_clock_speed =
5837 i9xx_misc_get_display_clock_speed;
5838 else if (IS_I915GM(dev))
5839 dev_priv->display.get_display_clock_speed =
5840 i915gm_get_display_clock_speed;
5841 else if (IS_I865G(dev))
5842 dev_priv->display.get_display_clock_speed =
5843 i865_get_display_clock_speed;
5844 else if (IS_I85X(dev))
5845 dev_priv->display.get_display_clock_speed =
5846 i855_get_display_clock_speed;
5848 dev_priv->display.get_display_clock_speed =
5849 i830_get_display_clock_speed;
5851 /* For FIFO watermark updates */
5852 if (HAS_PCH_SPLIT(dev)) {
5853 if (IS_IRONLAKE(dev)) {
5854 if (I915_READ(MLTR_ILK) & ILK_SRLT_MASK)
5855 dev_priv->display.update_wm = ironlake_update_wm;
5857 DRM_DEBUG_KMS("Failed to get proper latency. "
5859 dev_priv->display.update_wm = NULL;
5862 dev_priv->display.update_wm = NULL;
5863 } else if (IS_PINEVIEW(dev)) {
5864 if (!intel_get_cxsr_latency(IS_PINEVIEW_G(dev),
5867 dev_priv->mem_freq)) {
5868 DRM_INFO("failed to find known CxSR latency "
5869 "(found ddr%s fsb freq %d, mem freq %d), "
5871 (dev_priv->is_ddr3 == 1) ? "3": "2",
5872 dev_priv->fsb_freq, dev_priv->mem_freq);
5873 /* Disable CxSR and never update its watermark again */
5874 pineview_disable_cxsr(dev);
5875 dev_priv->display.update_wm = NULL;
5877 dev_priv->display.update_wm = pineview_update_wm;
5878 } else if (IS_G4X(dev))
5879 dev_priv->display.update_wm = g4x_update_wm;
5880 else if (IS_I965G(dev))
5881 dev_priv->display.update_wm = i965_update_wm;
5882 else if (IS_I9XX(dev)) {
5883 dev_priv->display.update_wm = i9xx_update_wm;
5884 dev_priv->display.get_fifo_size = i9xx_get_fifo_size;
5885 } else if (IS_I85X(dev)) {
5886 dev_priv->display.update_wm = i9xx_update_wm;
5887 dev_priv->display.get_fifo_size = i85x_get_fifo_size;
5889 dev_priv->display.update_wm = i830_update_wm;
5891 dev_priv->display.get_fifo_size = i845_get_fifo_size;
5893 dev_priv->display.get_fifo_size = i830_get_fifo_size;
5898 * Some BIOSes insist on assuming the GPU's pipe A is enabled at suspend,
5899 * resume, or other times. This quirk makes sure that's the case for
5902 static void quirk_pipea_force (struct drm_device *dev)
5904 struct drm_i915_private *dev_priv = dev->dev_private;
5906 dev_priv->quirks |= QUIRK_PIPEA_FORCE;
5907 DRM_DEBUG_DRIVER("applying pipe a force quirk\n");
5910 struct intel_quirk {
5912 int subsystem_vendor;
5913 int subsystem_device;
5914 void (*hook)(struct drm_device *dev);
5917 struct intel_quirk intel_quirks[] = {
5918 /* HP Compaq 2730p needs pipe A force quirk (LP: #291555) */
5919 { 0x2a42, 0x103c, 0x30eb, quirk_pipea_force },
5920 /* HP Mini needs pipe A force quirk (LP: #322104) */
5921 { 0x27ae,0x103c, 0x361a, quirk_pipea_force },
5923 /* Thinkpad R31 needs pipe A force quirk */
5924 { 0x3577, 0x1014, 0x0505, quirk_pipea_force },
5925 /* Toshiba Protege R-205, S-209 needs pipe A force quirk */
5926 { 0x2592, 0x1179, 0x0001, quirk_pipea_force },
5928 /* ThinkPad X30 needs pipe A force quirk (LP: #304614) */
5929 { 0x3577, 0x1014, 0x0513, quirk_pipea_force },
5930 /* ThinkPad X40 needs pipe A force quirk */
5932 /* ThinkPad T60 needs pipe A force quirk (bug #16494) */
5933 { 0x2782, 0x17aa, 0x201a, quirk_pipea_force },
5935 /* 855 & before need to leave pipe A & dpll A up */
5936 { 0x3582, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
5937 { 0x2562, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
5940 static void intel_init_quirks(struct drm_device *dev)
5942 struct pci_dev *d = dev->pdev;
5945 for (i = 0; i < ARRAY_SIZE(intel_quirks); i++) {
5946 struct intel_quirk *q = &intel_quirks[i];
5948 if (d->device == q->device &&
5949 (d->subsystem_vendor == q->subsystem_vendor ||
5950 q->subsystem_vendor == PCI_ANY_ID) &&
5951 (d->subsystem_device == q->subsystem_device ||
5952 q->subsystem_device == PCI_ANY_ID))
5957 /* Disable the VGA plane that we never use */
5958 static void i915_disable_vga(struct drm_device *dev)
5960 struct drm_i915_private *dev_priv = dev->dev_private;
5964 if (HAS_PCH_SPLIT(dev))
5965 vga_reg = CPU_VGACNTRL;
5969 vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO);
5970 outb(1, VGA_SR_INDEX);
5971 sr1 = inb(VGA_SR_DATA);
5972 outb(sr1 | 1<<5, VGA_SR_DATA);
5973 vga_put(dev->pdev, VGA_RSRC_LEGACY_IO);
5976 I915_WRITE(vga_reg, VGA_DISP_DISABLE);
5977 POSTING_READ(vga_reg);
5980 void intel_modeset_init(struct drm_device *dev)
5982 struct drm_i915_private *dev_priv = dev->dev_private;
5985 drm_mode_config_init(dev);
5987 dev->mode_config.min_width = 0;
5988 dev->mode_config.min_height = 0;
5990 dev->mode_config.funcs = (void *)&intel_mode_funcs;
5992 intel_init_quirks(dev);
5994 intel_init_display(dev);
5996 if (IS_I965G(dev)) {
5997 dev->mode_config.max_width = 8192;
5998 dev->mode_config.max_height = 8192;
5999 } else if (IS_I9XX(dev)) {
6000 dev->mode_config.max_width = 4096;
6001 dev->mode_config.max_height = 4096;
6003 dev->mode_config.max_width = 2048;
6004 dev->mode_config.max_height = 2048;
6007 /* set memory base */
6009 dev->mode_config.fb_base = pci_resource_start(dev->pdev, 2);
6011 dev->mode_config.fb_base = pci_resource_start(dev->pdev, 0);
6013 if (IS_MOBILE(dev) || IS_I9XX(dev))
6014 dev_priv->num_pipe = 2;
6016 dev_priv->num_pipe = 1;
6017 DRM_DEBUG_KMS("%d display pipe%s available.\n",
6018 dev_priv->num_pipe, dev_priv->num_pipe > 1 ? "s" : "");
6020 for (i = 0; i < dev_priv->num_pipe; i++) {
6021 intel_crtc_init(dev, i);
6024 intel_setup_outputs(dev);
6026 intel_init_clock_gating(dev);
6028 /* Just disable it once at startup */
6029 i915_disable_vga(dev);
6031 if (IS_IRONLAKE_M(dev)) {
6032 ironlake_enable_drps(dev);
6033 intel_init_emon(dev);
6036 INIT_WORK(&dev_priv->idle_work, intel_idle_update);
6037 setup_timer(&dev_priv->idle_timer, intel_gpu_idle_timer,
6038 (unsigned long)dev);
6040 intel_setup_overlay(dev);
6043 void intel_modeset_cleanup(struct drm_device *dev)
6045 struct drm_i915_private *dev_priv = dev->dev_private;
6046 struct drm_crtc *crtc;
6047 struct intel_crtc *intel_crtc;
6049 mutex_lock(&dev->struct_mutex);
6051 drm_kms_helper_poll_fini(dev);
6052 intel_fbdev_fini(dev);
6054 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
6055 /* Skip inactive CRTCs */
6059 intel_crtc = to_intel_crtc(crtc);
6060 intel_increase_pllclock(crtc, false);
6061 del_timer_sync(&intel_crtc->idle_timer);
6064 del_timer_sync(&dev_priv->idle_timer);
6066 if (dev_priv->display.disable_fbc)
6067 dev_priv->display.disable_fbc(dev);
6069 if (dev_priv->renderctx) {
6070 struct drm_i915_gem_object *obj_priv;
6072 obj_priv = to_intel_bo(dev_priv->renderctx);
6073 I915_WRITE(CCID, obj_priv->gtt_offset &~ CCID_EN);
6075 i915_gem_object_unpin(dev_priv->renderctx);
6076 drm_gem_object_unreference(dev_priv->renderctx);
6079 if (dev_priv->pwrctx) {
6080 struct drm_i915_gem_object *obj_priv;
6082 obj_priv = to_intel_bo(dev_priv->pwrctx);
6083 I915_WRITE(PWRCTXA, obj_priv->gtt_offset &~ PWRCTX_EN);
6085 i915_gem_object_unpin(dev_priv->pwrctx);
6086 drm_gem_object_unreference(dev_priv->pwrctx);
6089 if (IS_IRONLAKE_M(dev))
6090 ironlake_disable_drps(dev);
6092 mutex_unlock(&dev->struct_mutex);
6094 drm_mode_config_cleanup(dev);
6099 * Return which encoder is currently attached for connector.
6101 struct drm_encoder *intel_attached_encoder (struct drm_connector *connector)
6103 struct drm_mode_object *obj;
6104 struct drm_encoder *encoder;
6107 for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
6108 if (connector->encoder_ids[i] == 0)
6111 obj = drm_mode_object_find(connector->dev,
6112 connector->encoder_ids[i],
6113 DRM_MODE_OBJECT_ENCODER);
6117 encoder = obj_to_encoder(obj);
6124 * set vga decode state - true == enable VGA decode
6126 int intel_modeset_vga_set_state(struct drm_device *dev, bool state)
6128 struct drm_i915_private *dev_priv = dev->dev_private;
6131 pci_read_config_word(dev_priv->bridge_dev, INTEL_GMCH_CTRL, &gmch_ctrl);
6133 gmch_ctrl &= ~INTEL_GMCH_VGA_DISABLE;
6135 gmch_ctrl |= INTEL_GMCH_VGA_DISABLE;
6136 pci_write_config_word(dev_priv->bridge_dev, INTEL_GMCH_CTRL, gmch_ctrl);