drivers/gpu/drm/i915/intel_display.c

   1 /*
   2  * Copyright © 2006-2007 Intel Corporation
   3  *
   4  * Permission is hereby granted, free of charge, to any person obtaining a
   5  * copy of this software and associated documentation files (the "Software"),
   6  * to deal in the Software without restriction, including without limitation
   7  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
   8  * and/or sell copies of the Software, and to permit persons to whom the
   9  * Software is furnished to do so, subject to the following conditions:
  10  *
  11  * The above copyright notice and this permission notice (including the next
  12  * paragraph) shall be included in all copies or substantial portions of the
  13  * Software.
  14  *
  15  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  16  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  17  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
  18  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  19  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  20  * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
  21  * DEALINGS IN THE SOFTWARE.
  22  *
  23  * Authors:
  24  *      Eric Anholt <eric@anholt.net>
  25  */
  26
  27 #include <linux/cpufreq.h>
  28 #include <linux/module.h>
  29 #include <linux/input.h>
  30 #include <linux/i2c.h>
  31 #include <linux/kernel.h>
  32 #include <linux/slab.h>
  33 #include <linux/vgaarb.h>
  34 #include <drm/drm_edid.h>
  35 #include "drmP.h"
  36 #include "intel_drv.h"
  37 #include "i915_drm.h"
  38 #include "i915_drv.h"
  39 #include "i915_trace.h"
  40 #include "drm_dp_helper.h"
  41 #include "drm_crtc_helper.h"
  42 #include <linux/dma_remapping.h>
  43
  44 #define HAS_eDP (intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))
  45
  46 bool intel_pipe_has_type(struct drm_crtc *crtc, int type);
  47 static void intel_update_watermarks(struct drm_device *dev);
  48 static void intel_increase_pllclock(struct drm_crtc *crtc);
  49 static void intel_crtc_update_cursor(struct drm_crtc *crtc, bool on);
  50
  51 typedef struct {
  52         /* given values */
  53         int n;
  54         int m1, m2;
  55         int p1, p2;
  56         /* derived values */
  57         int     dot;
  58         int     vco;
  59         int     m;
  60         int     p;
  61 } intel_clock_t;
  62
  63 typedef struct {
  64         int     min, max;
  65 } intel_range_t;
  66
  67 typedef struct {
  68         int     dot_limit;
  69         int     p2_slow, p2_fast;
  70 } intel_p2_t;
  71
  72 #define INTEL_P2_NUM                  2
  73 typedef struct intel_limit intel_limit_t;
  74 struct intel_limit {
  75         intel_range_t   dot, vco, n, m, m1, m2, p, p1;
  76         intel_p2_t          p2;
  77         bool (* find_pll)(const intel_limit_t *, struct drm_crtc *,
  78                         int, int, intel_clock_t *, intel_clock_t *);
  79 };
  80
  81 /* FDI */
  82 #define IRONLAKE_FDI_FREQ               2700000 /* in kHz for mode->clock */
  83
  84 static bool
  85 intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
  86                     int target, int refclk, intel_clock_t *match_clock,
  87                     intel_clock_t *best_clock);
  88 static bool
  89 intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
  90                         int target, int refclk, intel_clock_t *match_clock,
  91                         intel_clock_t *best_clock);
  92
  93 static bool
  94 intel_find_pll_g4x_dp(const intel_limit_t *, struct drm_crtc *crtc,
  95                       int target, int refclk, intel_clock_t *match_clock,
  96                       intel_clock_t *best_clock);
  97 static bool
  98 intel_find_pll_ironlake_dp(const intel_limit_t *, struct drm_crtc *crtc,
  99                            int target, int refclk, intel_clock_t *match_clock,
 100                            intel_clock_t *best_clock);
 101
 102 static inline u32 /* units of 100MHz */
 103 intel_fdi_link_freq(struct drm_device *dev)
 104 {
 105         if (IS_GEN5(dev)) {
 106                 struct drm_i915_private *dev_priv = dev->dev_private;
 107                 return (I915_READ(FDI_PLL_BIOS_0) & FDI_PLL_FB_CLOCK_MASK) + 2;
 108         } else
 109                 return 27;
 110 }
 111
 112 static const intel_limit_t intel_limits_i8xx_dvo = {
 113         .dot = { .min = 25000, .max = 350000 },
 114         .vco = { .min = 930000, .max = 1400000 },
 115         .n = { .min = 3, .max = 16 },
 116         .m = { .min = 96, .max = 140 },
 117         .m1 = { .min = 18, .max = 26 },
 118         .m2 = { .min = 6, .max = 16 },
 119         .p = { .min = 4, .max = 128 },
 120         .p1 = { .min = 2, .max = 33 },
 121         .p2 = { .dot_limit = 165000,
 122                 .p2_slow = 4, .p2_fast = 2 },
 123         .find_pll = intel_find_best_PLL,
 124 };
 125
 126 static const intel_limit_t intel_limits_i8xx_lvds = {
 127         .dot = { .min = 25000, .max = 350000 },
 128         .vco = { .min = 930000, .max = 1400000 },
 129         .n = { .min = 3, .max = 16 },
 130         .m = { .min = 96, .max = 140 },
 131         .m1 = { .min = 18, .max = 26 },
 132         .m2 = { .min = 6, .max = 16 },
 133         .p = { .min = 4, .max = 128 },
 134         .p1 = { .min = 1, .max = 6 },
 135         .p2 = { .dot_limit = 165000,
 136                 .p2_slow = 14, .p2_fast = 7 },
 137         .find_pll = intel_find_best_PLL,
 138 };
 139
 140 static const intel_limit_t intel_limits_i9xx_sdvo = {
 141         .dot = { .min = 20000, .max = 400000 },
 142         .vco = { .min = 1400000, .max = 2800000 },
 143         .n = { .min = 1, .max = 6 },
 144         .m = { .min = 70, .max = 120 },
 145         .m1 = { .min = 10, .max = 22 },
 146         .m2 = { .min = 5, .max = 9 },
 147         .p = { .min = 5, .max = 80 },
 148         .p1 = { .min = 1, .max = 8 },
 149         .p2 = { .dot_limit = 200000,
 150                 .p2_slow = 10, .p2_fast = 5 },
 151         .find_pll = intel_find_best_PLL,
 152 };
 153
 154 static const intel_limit_t intel_limits_i9xx_lvds = {
 155         .dot = { .min = 20000, .max = 400000 },
 156         .vco = { .min = 1400000, .max = 2800000 },
 157         .n = { .min = 1, .max = 6 },
 158         .m = { .min = 70, .max = 120 },
 159         .m1 = { .min = 10, .max = 22 },
 160         .m2 = { .min = 5, .max = 9 },
 161         .p = { .min = 7, .max = 98 },
 162         .p1 = { .min = 1, .max = 8 },
 163         .p2 = { .dot_limit = 112000,
 164                 .p2_slow = 14, .p2_fast = 7 },
 165         .find_pll = intel_find_best_PLL,
 166 };
 167
 168
 169 static const intel_limit_t intel_limits_g4x_sdvo = {
 170         .dot = { .min = 25000, .max = 270000 },
 171         .vco = { .min = 1750000, .max = 3500000},
 172         .n = { .min = 1, .max = 4 },
 173         .m = { .min = 104, .max = 138 },
 174         .m1 = { .min = 17, .max = 23 },
 175         .m2 = { .min = 5, .max = 11 },
 176         .p = { .min = 10, .max = 30 },
 177         .p1 = { .min = 1, .max = 3},
 178         .p2 = { .dot_limit = 270000,
 179                 .p2_slow = 10,
 180                 .p2_fast = 10
 181         },
 182         .find_pll = intel_g4x_find_best_PLL,
 183 };
 184
 185 static const intel_limit_t intel_limits_g4x_hdmi = {
 186         .dot = { .min = 22000, .max = 400000 },
 187         .vco = { .min = 1750000, .max = 3500000},
 188         .n = { .min = 1, .max = 4 },
 189         .m = { .min = 104, .max = 138 },
 190         .m1 = { .min = 16, .max = 23 },
 191         .m2 = { .min = 5, .max = 11 },
 192         .p = { .min = 5, .max = 80 },
 193         .p1 = { .min = 1, .max = 8},
 194         .p2 = { .dot_limit = 165000,
 195                 .p2_slow = 10, .p2_fast = 5 },
 196         .find_pll = intel_g4x_find_best_PLL,
 197 };
 198
 199 static const intel_limit_t intel_limits_g4x_single_channel_lvds = {
 200         .dot = { .min = 20000, .max = 115000 },
 201         .vco = { .min = 1750000, .max = 3500000 },
 202         .n = { .min = 1, .max = 3 },
 203         .m = { .min = 104, .max = 138 },
 204         .m1 = { .min = 17, .max = 23 },
 205         .m2 = { .min = 5, .max = 11 },
 206         .p = { .min = 28, .max = 112 },
 207         .p1 = { .min = 2, .max = 8 },
 208         .p2 = { .dot_limit = 0,
 209                 .p2_slow = 14, .p2_fast = 14
 210         },
 211         .find_pll = intel_g4x_find_best_PLL,
 212 };
 213
 214 static const intel_limit_t intel_limits_g4x_dual_channel_lvds = {
 215         .dot = { .min = 80000, .max = 224000 },
 216         .vco = { .min = 1750000, .max = 3500000 },
 217         .n = { .min = 1, .max = 3 },
 218         .m = { .min = 104, .max = 138 },
 219         .m1 = { .min = 17, .max = 23 },
 220         .m2 = { .min = 5, .max = 11 },
 221         .p = { .min = 14, .max = 42 },
 222         .p1 = { .min = 2, .max = 6 },
 223         .p2 = { .dot_limit = 0,
 224                 .p2_slow = 7, .p2_fast = 7
 225         },
 226         .find_pll = intel_g4x_find_best_PLL,
 227 };
 228
 229 static const intel_limit_t intel_limits_g4x_display_port = {
 230         .dot = { .min = 161670, .max = 227000 },
 231         .vco = { .min = 1750000, .max = 3500000},
 232         .n = { .min = 1, .max = 2 },
 233         .m = { .min = 97, .max = 108 },
 234         .m1 = { .min = 0x10, .max = 0x12 },
 235         .m2 = { .min = 0x05, .max = 0x06 },
 236         .p = { .min = 10, .max = 20 },
 237         .p1 = { .min = 1, .max = 2},
 238         .p2 = { .dot_limit = 0,
 239                 .p2_slow = 10, .p2_fast = 10 },
 240         .find_pll = intel_find_pll_g4x_dp,
 241 };
 242
 243 static const intel_limit_t intel_limits_pineview_sdvo = {
 244         .dot = { .min = 20000, .max = 400000},
 245         .vco = { .min = 1700000, .max = 3500000 },
 246         /* Pineview's Ncounter is a ring counter */
 247         .n = { .min = 3, .max = 6 },
 248         .m = { .min = 2, .max = 256 },
 249         /* Pineview only has one combined m divider, which we treat as m2. */
 250         .m1 = { .min = 0, .max = 0 },
 251         .m2 = { .min = 0, .max = 254 },
 252         .p = { .min = 5, .max = 80 },
 253         .p1 = { .min = 1, .max = 8 },
 254         .p2 = { .dot_limit = 200000,
 255                 .p2_slow = 10, .p2_fast = 5 },
 256         .find_pll = intel_find_best_PLL,
 257 };
 258
 259 static const intel_limit_t intel_limits_pineview_lvds = {
 260         .dot = { .min = 20000, .max = 400000 },
 261         .vco = { .min = 1700000, .max = 3500000 },
 262         .n = { .min = 3, .max = 6 },
 263         .m = { .min = 2, .max = 256 },
 264         .m1 = { .min = 0, .max = 0 },
 265         .m2 = { .min = 0, .max = 254 },
 266         .p = { .min = 7, .max = 112 },
 267         .p1 = { .min = 1, .max = 8 },
 268         .p2 = { .dot_limit = 112000,
 269                 .p2_slow = 14, .p2_fast = 14 },
 270         .find_pll = intel_find_best_PLL,
 271 };
 272
 273 /* Ironlake / Sandybridge
 274  *
 275  * We calculate clock using (register_value + 2) for N/M1/M2, so here
 276  * the range value for them is (actual_value - 2).
 277  */
 278 static const intel_limit_t intel_limits_ironlake_dac = {
 279         .dot = { .min = 25000, .max = 350000 },
 280         .vco = { .min = 1760000, .max = 3510000 },
 281         .n = { .min = 1, .max = 5 },
 282         .m = { .min = 79, .max = 127 },
 283         .m1 = { .min = 12, .max = 22 },
 284         .m2 = { .min = 5, .max = 9 },
 285         .p = { .min = 5, .max = 80 },
 286         .p1 = { .min = 1, .max = 8 },
 287         .p2 = { .dot_limit = 225000,
 288                 .p2_slow = 10, .p2_fast = 5 },
 289         .find_pll = intel_g4x_find_best_PLL,
 290 };
 291
 292 static const intel_limit_t intel_limits_ironlake_single_lvds = {
 293         .dot = { .min = 25000, .max = 350000 },
 294         .vco = { .min = 1760000, .max = 3510000 },
 295         .n = { .min = 1, .max = 3 },
 296         .m = { .min = 79, .max = 118 },
 297         .m1 = { .min = 12, .max = 22 },
 298         .m2 = { .min = 5, .max = 9 },
 299         .p = { .min = 28, .max = 112 },
 300         .p1 = { .min = 2, .max = 8 },
 301         .p2 = { .dot_limit = 225000,
 302                 .p2_slow = 14, .p2_fast = 14 },
 303         .find_pll = intel_g4x_find_best_PLL,
 304 };
 305
 306 static const intel_limit_t intel_limits_ironlake_dual_lvds = {
 307         .dot = { .min = 25000, .max = 350000 },
 308         .vco = { .min = 1760000, .max = 3510000 },
 309         .n = { .min = 1, .max = 3 },
 310         .m = { .min = 79, .max = 127 },
 311         .m1 = { .min = 12, .max = 22 },
 312         .m2 = { .min = 5, .max = 9 },
 313         .p = { .min = 14, .max = 56 },
 314         .p1 = { .min = 2, .max = 8 },
 315         .p2 = { .dot_limit = 225000,
 316                 .p2_slow = 7, .p2_fast = 7 },
 317         .find_pll = intel_g4x_find_best_PLL,
 318 };
 319
 320 /* LVDS 100mhz refclk limits. */
 321 static const intel_limit_t intel_limits_ironlake_single_lvds_100m = {
 322         .dot = { .min = 25000, .max = 350000 },
 323         .vco = { .min = 1760000, .max = 3510000 },
 324         .n = { .min = 1, .max = 2 },
 325         .m = { .min = 79, .max = 126 },
 326         .m1 = { .min = 12, .max = 22 },
 327         .m2 = { .min = 5, .max = 9 },
 328         .p = { .min = 28, .max = 112 },
 329         .p1 = { .min = 2, .max = 8 },
 330         .p2 = { .dot_limit = 225000,
 331                 .p2_slow = 14, .p2_fast = 14 },
 332         .find_pll = intel_g4x_find_best_PLL,
 333 };
 334
 335 static const intel_limit_t intel_limits_ironlake_dual_lvds_100m = {
 336         .dot = { .min = 25000, .max = 350000 },
 337         .vco = { .min = 1760000, .max = 3510000 },
 338         .n = { .min = 1, .max = 3 },
 339         .m = { .min = 79, .max = 126 },
 340         .m1 = { .min = 12, .max = 22 },
 341         .m2 = { .min = 5, .max = 9 },
 342         .p = { .min = 14, .max = 42 },
 343         .p1 = { .min = 2, .max = 6 },
 344         .p2 = { .dot_limit = 225000,
 345                 .p2_slow = 7, .p2_fast = 7 },
 346         .find_pll = intel_g4x_find_best_PLL,
 347 };
 348
 349 static const intel_limit_t intel_limits_ironlake_display_port = {
 350         .dot = { .min = 25000, .max = 350000 },
 351         .vco = { .min = 1760000, .max = 3510000},
 352         .n = { .min = 1, .max = 2 },
 353         .m = { .min = 81, .max = 90 },
 354         .m1 = { .min = 12, .max = 22 },
 355         .m2 = { .min = 5, .max = 9 },
 356         .p = { .min = 10, .max = 20 },
 357         .p1 = { .min = 1, .max = 2},
 358         .p2 = { .dot_limit = 0,
 359                 .p2_slow = 10, .p2_fast = 10 },
 360         .find_pll = intel_find_pll_ironlake_dp,
 361 };
 362
 363 static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc,
 364                                                 int refclk)
 365 {
 366         struct drm_device *dev = crtc->dev;
 367         struct drm_i915_private *dev_priv = dev->dev_private;
 368         const intel_limit_t *limit;
 369
 370         if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
 371                 if ((I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) ==
 372                     LVDS_CLKB_POWER_UP) {
 373                         /* LVDS dual channel */
 374                         if (refclk == 100000)
 375                                 limit = &intel_limits_ironlake_dual_lvds_100m;
 376                         else
 377                                 limit = &intel_limits_ironlake_dual_lvds;
 378                 } else {
 379                         if (refclk == 100000)
 380                                 limit = &intel_limits_ironlake_single_lvds_100m;
 381                         else
 382                                 limit = &intel_limits_ironlake_single_lvds;
 383                 }
 384         } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
 385                         HAS_eDP)
 386                 limit = &intel_limits_ironlake_display_port;
 387         else
 388                 limit = &intel_limits_ironlake_dac;
 389
 390         return limit;
 391 }
 392
 393 static const intel_limit_t *intel_g4x_limit(struct drm_crtc *crtc)
 394 {
 395         struct drm_device *dev = crtc->dev;
 396         struct drm_i915_private *dev_priv = dev->dev_private;
 397         const intel_limit_t *limit;
 398
 399         if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
 400                 if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
 401                     LVDS_CLKB_POWER_UP)
 402                         /* LVDS with dual channel */
 403                         limit = &intel_limits_g4x_dual_channel_lvds;
 404                 else
 405                         /* LVDS with dual channel */
 406                         limit = &intel_limits_g4x_single_channel_lvds;
 407         } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI) ||
 408                    intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG)) {
 409                 limit = &intel_limits_g4x_hdmi;
 410         } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) {
 411                 limit = &intel_limits_g4x_sdvo;
 412         } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
 413                 limit = &intel_limits_g4x_display_port;
 414         } else /* The option is for other outputs */
 415                 limit = &intel_limits_i9xx_sdvo;
 416
 417         return limit;
 418 }
 419
 420 static const intel_limit_t *intel_limit(struct drm_crtc *crtc, int refclk)
 421 {
 422         struct drm_device *dev = crtc->dev;
 423         const intel_limit_t *limit;
 424
 425         if (HAS_PCH_SPLIT(dev))
 426                 limit = intel_ironlake_limit(crtc, refclk);
 427         else if (IS_G4X(dev)) {
 428                 limit = intel_g4x_limit(crtc);
 429         } else if (IS_PINEVIEW(dev)) {
 430                 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
 431                         limit = &intel_limits_pineview_lvds;
 432                 else
 433                         limit = &intel_limits_pineview_sdvo;
 434         } else if (!IS_GEN2(dev)) {
 435                 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
 436                         limit = &intel_limits_i9xx_lvds;
 437                 else
 438                         limit = &intel_limits_i9xx_sdvo;
 439         } else {
 440                 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
 441                         limit = &intel_limits_i8xx_lvds;
 442                 else
 443                         limit = &intel_limits_i8xx_dvo;
 444         }
 445         return limit;
 446 }
 447
 448 /* m1 is reserved as 0 in Pineview, n is a ring counter */
 449 static void pineview_clock(int refclk, intel_clock_t *clock)
 450 {
 451         clock->m = clock->m2 + 2;
 452         clock->p = clock->p1 * clock->p2;
 453         clock->vco = refclk * clock->m / clock->n;
 454         clock->dot = clock->vco / clock->p;
 455 }
 456
 457 static void intel_clock(struct drm_device *dev, int refclk, intel_clock_t *clock)
 458 {
 459         if (IS_PINEVIEW(dev)) {
 460                 pineview_clock(refclk, clock);
 461                 return;
 462         }
 463         clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2);
 464         clock->p = clock->p1 * clock->p2;
 465         clock->vco = refclk * clock->m / (clock->n + 2);
 466         clock->dot = clock->vco / clock->p;
 467 }
 468
 469 /**
 470  * Returns whether any output on the specified pipe is of the specified type
 471  */
 472 bool intel_pipe_has_type(struct drm_crtc *crtc, int type)
 473 {
 474         struct drm_device *dev = crtc->dev;
 475         struct drm_mode_config *mode_config = &dev->mode_config;
 476         struct intel_encoder *encoder;
 477
 478         list_for_each_entry(encoder, &mode_config->encoder_list, base.head)
 479                 if (encoder->base.crtc == crtc && encoder->type == type)
 480                         return true;
 481
 482         return false;
 483 }
 484
 485 #define INTELPllInvalid(s)   do { /* DRM_DEBUG(s); */ return false; } while (0)
 486 /**
 487  * Returns whether the given set of divisors are valid for a given refclk with
 488  * the given connectors.
 489  */
 490
 491 static bool intel_PLL_is_valid(struct drm_device *dev,
 492                                const intel_limit_t *limit,
 493                                const intel_clock_t *clock)
 494 {
 495         if (clock->p1  < limit->p1.min  || limit->p1.max  < clock->p1)
 496                 INTELPllInvalid("p1 out of range\n");
 497         if (clock->p   < limit->p.min   || limit->p.max   < clock->p)
 498                 INTELPllInvalid("p out of range\n");
 499         if (clock->m2  < limit->m2.min  || limit->m2.max  < clock->m2)
 500                 INTELPllInvalid("m2 out of range\n");
 501         if (clock->m1  < limit->m1.min  || limit->m1.max  < clock->m1)
 502                 INTELPllInvalid("m1 out of range\n");
 503         if (clock->m1 <= clock->m2 && !IS_PINEVIEW(dev))
 504                 INTELPllInvalid("m1 <= m2\n");
 505         if (clock->m   < limit->m.min   || limit->m.max   < clock->m)
 506                 INTELPllInvalid("m out of range\n");
 507         if (clock->n   < limit->n.min   || limit->n.max   < clock->n)
 508                 INTELPllInvalid("n out of range\n");
 509         if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
 510                 INTELPllInvalid("vco out of range\n");
 511         /* XXX: We may need to be checking "Dot clock" depending on the multiplier,
 512          * connector, etc., rather than just a single range.
 513          */
 514         if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
 515                 INTELPllInvalid("dot out of range\n");
 516
 517         return true;
 518 }
 519
 520 static bool
 521 intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 522                     int target, int refclk, intel_clock_t *match_clock,
 523                     intel_clock_t *best_clock)
 524
 525 {
 526         struct drm_device *dev = crtc->dev;
 527         struct drm_i915_private *dev_priv = dev->dev_private;
 528         intel_clock_t clock;
 529         int err = target;
 530
 531         if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
 532             (I915_READ(LVDS)) != 0) {
 533                 /*
 534                  * For LVDS, if the panel is on, just rely on its current
 535                  * settings for dual-channel.  We haven't figured out how to
 536                  * reliably set up different single/dual channel state, if we
 537                  * even can.
 538                  */
 539                 if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
 540                     LVDS_CLKB_POWER_UP)
 541                         clock.p2 = limit->p2.p2_fast;
 542                 else
 543                         clock.p2 = limit->p2.p2_slow;
 544         } else {
 545                 if (target < limit->p2.dot_limit)
 546                         clock.p2 = limit->p2.p2_slow;
 547                 else
 548                         clock.p2 = limit->p2.p2_fast;
 549         }
 550
 551         memset(best_clock, 0, sizeof(*best_clock));
 552
 553         for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
 554              clock.m1++) {
 555                 for (clock.m2 = limit->m2.min;
 556                      clock.m2 <= limit->m2.max; clock.m2++) {
 557                         /* m1 is always 0 in Pineview */
 558                         if (clock.m2 >= clock.m1 && !IS_PINEVIEW(dev))
 559                                 break;
 560                         for (clock.n = limit->n.min;
 561                              clock.n <= limit->n.max; clock.n++) {
 562                                 for (clock.p1 = limit->p1.min;
 563                                         clock.p1 <= limit->p1.max; clock.p1++) {
 564                                         int this_err;
 565
 566                                         intel_clock(dev, refclk, &clock);
 567                                         if (!intel_PLL_is_valid(dev, limit,
 568                                                                 &clock))
 569                                                 continue;
 570                                         if (match_clock &&
 571                                             clock.p != match_clock->p)
 572                                                 continue;
 573
 574                                         this_err = abs(clock.dot - target);
 575                                         if (this_err < err) {
 576                                                 *best_clock = clock;
 577                                                 err = this_err;
 578                                         }
 579                                 }
 580                         }
 581                 }
 582         }
 583
 584         return (err != target);
 585 }
 586
 587 static bool
 588 intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 589                         int target, int refclk, intel_clock_t *match_clock,
 590                         intel_clock_t *best_clock)
 591 {
 592         struct drm_device *dev = crtc->dev;
 593         struct drm_i915_private *dev_priv = dev->dev_private;
 594         intel_clock_t clock;
 595         int max_n;
 596         bool found;
 597         /* approximately equals target * 0.00585 */
 598         int err_most = (target >> 8) + (target >> 9);
 599         found = false;
 600
 601         if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
 602                 int lvds_reg;
 603
 604                 if (HAS_PCH_SPLIT(dev))
 605                         lvds_reg = PCH_LVDS;
 606                 else
 607                         lvds_reg = LVDS;
 608                 if ((I915_READ(lvds_reg) & LVDS_CLKB_POWER_MASK) ==
 609                     LVDS_CLKB_POWER_UP)
 610                         clock.p2 = limit->p2.p2_fast;
 611                 else
 612                         clock.p2 = limit->p2.p2_slow;
 613         } else {
 614                 if (target < limit->p2.dot_limit)
 615                         clock.p2 = limit->p2.p2_slow;
 616                 else
 617                         clock.p2 = limit->p2.p2_fast;
 618         }
 619
 620         memset(best_clock, 0, sizeof(*best_clock));
 621         max_n = limit->n.max;
 622         /* based on hardware requirement, prefer smaller n to precision */
 623         for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
 624                 /* based on hardware requirement, prefere larger m1,m2 */
 625                 for (clock.m1 = limit->m1.max;
 626                      clock.m1 >= limit->m1.min; clock.m1--) {
 627                         for (clock.m2 = limit->m2.max;
 628                              clock.m2 >= limit->m2.min; clock.m2--) {
 629                                 for (clock.p1 = limit->p1.max;
 630                                      clock.p1 >= limit->p1.min; clock.p1--) {
 631                                         int this_err;
 632
 633                                         intel_clock(dev, refclk, &clock);
 634                                         if (!intel_PLL_is_valid(dev, limit,
 635                                                                 &clock))
 636                                                 continue;
 637                                         if (match_clock &&
 638                                             clock.p != match_clock->p)
 639                                                 continue;
 640
 641                                         this_err = abs(clock.dot - target);
 642                                         if (this_err < err_most) {
 643                                                 *best_clock = clock;
 644                                                 err_most = this_err;
 645                                                 max_n = clock.n;
 646                                                 found = true;
 647                                         }
 648                                 }
 649                         }
 650                 }
 651         }
 652         return found;
 653 }
 654
 655 static bool
 656 intel_find_pll_ironlake_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
 657                            int target, int refclk, intel_clock_t *match_clock,
 658                            intel_clock_t *best_clock)
 659 {
 660         struct drm_device *dev = crtc->dev;
 661         intel_clock_t clock;
 662
 663         if (target < 200000) {
 664                 clock.n = 1;
 665                 clock.p1 = 2;
 666                 clock.p2 = 10;
 667                 clock.m1 = 12;
 668                 clock.m2 = 9;
 669         } else {
 670                 clock.n = 2;
 671                 clock.p1 = 1;
 672                 clock.p2 = 10;
 673                 clock.m1 = 14;
 674                 clock.m2 = 8;
 675         }
 676         intel_clock(dev, refclk, &clock);
 677         memcpy(best_clock, &clock, sizeof(intel_clock_t));
 678         return true;
 679 }
 680
 681 /* DisplayPort has only two frequencies, 162MHz and 270MHz */
 682 static bool
 683 intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
 684                       int target, int refclk, intel_clock_t *match_clock,
 685                       intel_clock_t *best_clock)
 686 {
 687         intel_clock_t clock;
 688         if (target < 200000) {
 689                 clock.p1 = 2;
 690                 clock.p2 = 10;
 691                 clock.n = 2;
 692                 clock.m1 = 23;
 693                 clock.m2 = 8;
 694         } else {
 695                 clock.p1 = 1;
 696                 clock.p2 = 10;
 697                 clock.n = 1;
 698                 clock.m1 = 14;
 699                 clock.m2 = 2;
 700         }
 701         clock.m = 5 * (clock.m1 + 2) + (clock.m2 + 2);
 702         clock.p = (clock.p1 * clock.p2);
 703         clock.dot = 96000 * clock.m / (clock.n + 2) / clock.p;
 704         clock.vco = 0;
 705         memcpy(best_clock, &clock, sizeof(intel_clock_t));
 706         return true;
 707 }
 708
 709 /**
 710  * intel_wait_for_vblank - wait for vblank on a given pipe
 711  * @dev: drm device
 712  * @pipe: pipe to wait for
 713  *
 714  * Wait for vblank to occur on a given pipe.  Needed for various bits of
 715  * mode setting code.
 716  */
 717 void intel_wait_for_vblank(struct drm_device *dev, int pipe)
 718 {
 719         struct drm_i915_private *dev_priv = dev->dev_private;
 720         int pipestat_reg = PIPESTAT(pipe);
 721
 722         /* Clear existing vblank status. Note this will clear any other
 723          * sticky status fields as well.
 724          *
 725          * This races with i915_driver_irq_handler() with the result
 726          * that either function could miss a vblank event.  Here it is not
 727          * fatal, as we will either wait upon the next vblank interrupt or
 728          * timeout.  Generally speaking intel_wait_for_vblank() is only
 729          * called during modeset at which time the GPU should be idle and
 730          * should *not* be performing page flips and thus not waiting on
 731          * vblanks...
 732          * Currently, the result of us stealing a vblank from the irq
 733          * handler is that a single frame will be skipped during swapbuffers.
 734          */
 735         I915_WRITE(pipestat_reg,
 736                    I915_READ(pipestat_reg) | PIPE_VBLANK_INTERRUPT_STATUS);
 737
 738         /* Wait for vblank interrupt bit to set */
 739         if (wait_for(I915_READ(pipestat_reg) &
 740                      PIPE_VBLANK_INTERRUPT_STATUS,
 741                      50))
 742                 DRM_DEBUG_KMS("vblank wait timed out\n");
 743 }
 744
 745 /*
 746  * intel_wait_for_pipe_off - wait for pipe to turn off
 747  * @dev: drm device
 748  * @pipe: pipe to wait for
 749  *
 750  * After disabling a pipe, we can't wait for vblank in the usual way,
 751  * spinning on the vblank interrupt status bit, since we won't actually
 752  * see an interrupt when the pipe is disabled.
 753  *
 754  * On Gen4 and above:
 755  *   wait for the pipe register state bit to turn off
 756  *
 757  * Otherwise:
 758  *   wait for the display line value to settle (it usually
 759  *   ends up stopping at the start of the next frame).
 760  *
 761  */
 762 void intel_wait_for_pipe_off(struct drm_device *dev, int pipe)
 763 {
 764         struct drm_i915_private *dev_priv = dev->dev_private;
 765
 766         if (INTEL_INFO(dev)->gen >= 4) {
 767                 int reg = PIPECONF(pipe);
 768
 769                 /* Wait for the Pipe State to go off */
 770                 if (wait_for((I915_READ(reg) & I965_PIPECONF_ACTIVE) == 0,
 771                              100))
 772                         DRM_DEBUG_KMS("pipe_off wait timed out\n");
 773         } else {
 774                 u32 last_line;
 775                 int reg = PIPEDSL(pipe);
 776                 unsigned long timeout = jiffies + msecs_to_jiffies(100);
 777
 778                 /* Wait for the display line to settle */
 779                 do {
 780                         last_line = I915_READ(reg) & DSL_LINEMASK;
 781                         mdelay(5);
 782                 } while (((I915_READ(reg) & DSL_LINEMASK) != last_line) &&
 783                          time_after(timeout, jiffies));
 784                 if (time_after(jiffies, timeout))
 785                         DRM_DEBUG_KMS("pipe_off wait timed out\n");
 786         }
 787 }
 788
 789 static const char *state_string(bool enabled)
 790 {
 791         return enabled ? "on" : "off";
 792 }
 793
 794 /* Only for pre-ILK configs */
 795 static void assert_pll(struct drm_i915_private *dev_priv,
 796                        enum pipe pipe, bool state)
 797 {
 798         int reg;
 799         u32 val;
 800         bool cur_state;
 801
 802         reg = DPLL(pipe);
 803         val = I915_READ(reg);
 804         cur_state = !!(val & DPLL_VCO_ENABLE);
 805         WARN(cur_state != state,
 806              "PLL state assertion failure (expected %s, current %s)\n",
 807              state_string(state), state_string(cur_state));
 808 }
 809 #define assert_pll_enabled(d, p) assert_pll(d, p, true)
 810 #define assert_pll_disabled(d, p) assert_pll(d, p, false)
 811
 812 /* For ILK+ */
 813 static void assert_pch_pll(struct drm_i915_private *dev_priv,
 814                            enum pipe pipe, bool state)
 815 {
 816         int reg;
 817         u32 val;
 818         bool cur_state;
 819
 820         if (HAS_PCH_CPT(dev_priv->dev)) {
 821                 u32 pch_dpll;
 822
 823                 pch_dpll = I915_READ(PCH_DPLL_SEL);
 824
 825                 /* Make sure the selected PLL is enabled to the transcoder */
 826                 WARN(!((pch_dpll >> (4 * pipe)) & 8),
 827                      "transcoder %d PLL not enabled\n", pipe);
 828
 829                 /* Convert the transcoder pipe number to a pll pipe number */
 830                 pipe = (pch_dpll >> (4 * pipe)) & 1;
 831         }
 832
 833         reg = PCH_DPLL(pipe);
 834         val = I915_READ(reg);
 835         cur_state = !!(val & DPLL_VCO_ENABLE);
 836         WARN(cur_state != state,
 837              "PCH PLL state assertion failure (expected %s, current %s)\n",
 838              state_string(state), state_string(cur_state));
 839 }
 840 #define assert_pch_pll_enabled(d, p) assert_pch_pll(d, p, true)
 841 #define assert_pch_pll_disabled(d, p) assert_pch_pll(d, p, false)
 842
 843 static void assert_fdi_tx(struct drm_i915_private *dev_priv,
 844                           enum pipe pipe, bool state)
 845 {
 846         int reg;
 847         u32 val;
 848         bool cur_state;
 849
 850         reg = FDI_TX_CTL(pipe);
 851         val = I915_READ(reg);
 852         cur_state = !!(val & FDI_TX_ENABLE);
 853         WARN(cur_state != state,
 854              "FDI TX state assertion failure (expected %s, current %s)\n",
 855              state_string(state), state_string(cur_state));
 856 }
 857 #define assert_fdi_tx_enabled(d, p) assert_fdi_tx(d, p, true)
 858 #define assert_fdi_tx_disabled(d, p) assert_fdi_tx(d, p, false)
 859
 860 static void assert_fdi_rx(struct drm_i915_private *dev_priv,
 861                           enum pipe pipe, bool state)
 862 {
 863         int reg;
 864         u32 val;
 865         bool cur_state;
 866
 867         reg = FDI_RX_CTL(pipe);
 868         val = I915_READ(reg);
 869         cur_state = !!(val & FDI_RX_ENABLE);
 870         WARN(cur_state != state,
 871              "FDI RX state assertion failure (expected %s, current %s)\n",
 872              state_string(state), state_string(cur_state));
 873 }
 874 #define assert_fdi_rx_enabled(d, p) assert_fdi_rx(d, p, true)
 875 #define assert_fdi_rx_disabled(d, p) assert_fdi_rx(d, p, false)
 876
 877 static void assert_fdi_tx_pll_enabled(struct drm_i915_private *dev_priv,
 878                                       enum pipe pipe)
 879 {
 880         int reg;
 881         u32 val;
 882
 883         /* ILK FDI PLL is always enabled */
 884         if (dev_priv->info->gen == 5)
 885                 return;
 886
 887         reg = FDI_TX_CTL(pipe);
 888         val = I915_READ(reg);
 889         WARN(!(val & FDI_TX_PLL_ENABLE), "FDI TX PLL assertion failure, should be active but is disabled\n");
 890 }
 891
 892 static void assert_fdi_rx_pll_enabled(struct drm_i915_private *dev_priv,
 893                                       enum pipe pipe)
 894 {
 895         int reg;
 896         u32 val;
 897
 898         reg = FDI_RX_CTL(pipe);
 899         val = I915_READ(reg);
 900         WARN(!(val & FDI_RX_PLL_ENABLE), "FDI RX PLL assertion failure, should be active but is disabled\n");
 901 }
 902
 903 static void assert_panel_unlocked(struct drm_i915_private *dev_priv,
 904                                   enum pipe pipe)
 905 {
 906         int pp_reg, lvds_reg;
 907         u32 val;
 908         enum pipe panel_pipe = PIPE_A;
 909         bool locked = true;
 910
 911         if (HAS_PCH_SPLIT(dev_priv->dev)) {
 912                 pp_reg = PCH_PP_CONTROL;
 913                 lvds_reg = PCH_LVDS;
 914         } else {
 915                 pp_reg = PP_CONTROL;
 916                 lvds_reg = LVDS;
 917         }
 918
 919         val = I915_READ(pp_reg);
 920         if (!(val & PANEL_POWER_ON) ||
 921             ((val & PANEL_UNLOCK_REGS) == PANEL_UNLOCK_REGS))
 922                 locked = false;
 923
 924         if (I915_READ(lvds_reg) & LVDS_PIPEB_SELECT)
 925                 panel_pipe = PIPE_B;
 926
 927         WARN(panel_pipe == pipe && locked,
 928              "panel assertion failure, pipe %c regs locked\n",
 929              pipe_name(pipe));
 930 }
 931
 932 void assert_pipe(struct drm_i915_private *dev_priv,
 933                  enum pipe pipe, bool state)
 934 {
 935         int reg;
 936         u32 val;
 937         bool cur_state;
 938
 939         /* if we need the pipe A quirk it must be always on */
 940         if (pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE)
 941                 state = true;
 942
 943         reg = PIPECONF(pipe);
 944         val = I915_READ(reg);
 945         cur_state = !!(val & PIPECONF_ENABLE);
 946         WARN(cur_state != state,
 947              "pipe %c assertion failure (expected %s, current %s)\n",
 948              pipe_name(pipe), state_string(state), state_string(cur_state));
 949 }
 950
 951 static void assert_plane(struct drm_i915_private *dev_priv,
 952                          enum plane plane, bool state)
 953 {
 954         int reg;
 955         u32 val;
 956         bool cur_state;
 957
 958         reg = DSPCNTR(plane);
 959         val = I915_READ(reg);
 960         cur_state = !!(val & DISPLAY_PLANE_ENABLE);
 961         WARN(cur_state != state,
 962              "plane %c assertion failure (expected %s, current %s)\n",
 963              plane_name(plane), state_string(state), state_string(cur_state));
 964 }
 965
 966 #define assert_plane_enabled(d, p) assert_plane(d, p, true)
 967 #define assert_plane_disabled(d, p) assert_plane(d, p, false)
 968
 969 static void assert_planes_disabled(struct drm_i915_private *dev_priv,
 970                                    enum pipe pipe)
 971 {
 972         int reg, i;
 973         u32 val;
 974         int cur_pipe;
 975
 976         /* Planes are fixed to pipes on ILK+ */
 977         if (HAS_PCH_SPLIT(dev_priv->dev)) {
 978                 reg = DSPCNTR(pipe);
 979                 val = I915_READ(reg);
 980                 WARN((val & DISPLAY_PLANE_ENABLE),
 981                      "plane %c assertion failure, should be disabled but not\n",
 982                      plane_name(pipe));
 983                 return;
 984         }
 985
 986         /* Need to check both planes against the pipe */
 987         for (i = 0; i < 2; i++) {
 988                 reg = DSPCNTR(i);
 989                 val = I915_READ(reg);
 990                 cur_pipe = (val & DISPPLANE_SEL_PIPE_MASK) >>
 991                         DISPPLANE_SEL_PIPE_SHIFT;
 992                 WARN((val & DISPLAY_PLANE_ENABLE) && pipe == cur_pipe,
 993                      "plane %c assertion failure, should be off on pipe %c but is still active\n",
 994                      plane_name(i), pipe_name(pipe));
 995         }
 996 }
 997
 998 static void assert_pch_refclk_enabled(struct drm_i915_private *dev_priv)
 999 {
1000         u32 val;
1001         bool enabled;
1002
1003         val = I915_READ(PCH_DREF_CONTROL);
1004         enabled = !!(val & (DREF_SSC_SOURCE_MASK | DREF_NONSPREAD_SOURCE_MASK |
1005                             DREF_SUPERSPREAD_SOURCE_MASK));
1006         WARN(!enabled, "PCH refclk assertion failure, should be active but is disabled\n");
1007 }
1008
1009 static void assert_transcoder_disabled(struct drm_i915_private *dev_priv,
1010                                        enum pipe pipe)
1011 {
1012         int reg;
1013         u32 val;
1014         bool enabled;
1015
1016         reg = TRANSCONF(pipe);
1017         val = I915_READ(reg);
1018         enabled = !!(val & TRANS_ENABLE);
1019         WARN(enabled,
1020              "transcoder assertion failed, should be off on pipe %c but is still active\n",
1021              pipe_name(pipe));
1022 }
1023
1024 static bool dp_pipe_enabled(struct drm_i915_private *dev_priv,
1025                             enum pipe pipe, u32 port_sel, u32 val)
1026 {
1027         if ((val & DP_PORT_EN) == 0)
1028                 return false;
1029
1030         if (HAS_PCH_CPT(dev_priv->dev)) {
1031                 u32     trans_dp_ctl_reg = TRANS_DP_CTL(pipe);
1032                 u32     trans_dp_ctl = I915_READ(trans_dp_ctl_reg);
1033                 if ((trans_dp_ctl & TRANS_DP_PORT_SEL_MASK) != port_sel)
1034                         return false;
1035         } else {
1036                 if ((val & DP_PIPE_MASK) != (pipe << 30))
1037                         return false;
1038         }
1039         return true;
1040 }
1041
1042 static bool hdmi_pipe_enabled(struct drm_i915_private *dev_priv,
1043                               enum pipe pipe, u32 val)
1044 {
1045         if ((val & PORT_ENABLE) == 0)
1046                 return false;
1047
1048         if (HAS_PCH_CPT(dev_priv->dev)) {
1049                 if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
1050                         return false;
1051         } else {
1052                 if ((val & TRANSCODER_MASK) != TRANSCODER(pipe))
1053                         return false;
1054         }
1055         return true;
1056 }
1057
1058 static bool lvds_pipe_enabled(struct drm_i915_private *dev_priv,
1059                               enum pipe pipe, u32 val)
1060 {
1061         if ((val & LVDS_PORT_EN) == 0)
1062                 return false;
1063
1064         if (HAS_PCH_CPT(dev_priv->dev)) {
1065                 if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
1066                         return false;
1067         } else {
1068                 if ((val & LVDS_PIPE_MASK) != LVDS_PIPE(pipe))
1069                         return false;
1070         }
1071         return true;
1072 }
1073
1074 static bool adpa_pipe_enabled(struct drm_i915_private *dev_priv,
1075                               enum pipe pipe, u32 val)
1076 {
1077         if ((val & ADPA_DAC_ENABLE) == 0)
1078                 return false;
1079         if (HAS_PCH_CPT(dev_priv->dev)) {
1080                 if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
1081                         return false;
1082         } else {
1083                 if ((val & ADPA_PIPE_SELECT_MASK) != ADPA_PIPE_SELECT(pipe))
1084                         return false;
1085         }
1086         return true;
1087 }
1088
1089 static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv,
1090                                    enum pipe pipe, int reg, u32 port_sel)
1091 {
1092         u32 val = I915_READ(reg);
1093         WARN(dp_pipe_enabled(dev_priv, pipe, port_sel, val),
1094              "PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n",
1095              reg, pipe_name(pipe));
1096 }
1097
1098 static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv,
1099                                      enum pipe pipe, int reg)
1100 {
1101         u32 val = I915_READ(reg);
1102         WARN(hdmi_pipe_enabled(dev_priv, val, pipe),
1103              "PCH HDMI (0x%08x) enabled on transcoder %c, should be disabled\n",
1104              reg, pipe_name(pipe));
1105 }
1106
1107 static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv,
1108                                       enum pipe pipe)
1109 {
1110         int reg;
1111         u32 val;
1112
1113         assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_B, TRANS_DP_PORT_SEL_B);
1114         assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_C, TRANS_DP_PORT_SEL_C);
1115         assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_D, TRANS_DP_PORT_SEL_D);
1116
1117         reg = PCH_ADPA;
1118         val = I915_READ(reg);
1119         WARN(adpa_pipe_enabled(dev_priv, val, pipe),
1120              "PCH VGA enabled on transcoder %c, should be disabled\n",
1121              pipe_name(pipe));
1122
1123         reg = PCH_LVDS;
1124         val = I915_READ(reg);
1125         WARN(lvds_pipe_enabled(dev_priv, val, pipe),
1126              "PCH LVDS enabled on transcoder %c, should be disabled\n",
1127              pipe_name(pipe));
1128
1129         assert_pch_hdmi_disabled(dev_priv, pipe, HDMIB);
1130         assert_pch_hdmi_disabled(dev_priv, pipe, HDMIC);
1131         assert_pch_hdmi_disabled(dev_priv, pipe, HDMID);
1132 }
1133
1134 /**
1135  * intel_enable_pll - enable a PLL
1136  * @dev_priv: i915 private structure
1137  * @pipe: pipe PLL to enable
1138  *
1139  * Enable @pipe's PLL so we can start pumping pixels from a plane.  Check to
1140  * make sure the PLL reg is writable first though, since the panel write
1141  * protect mechanism may be enabled.
1142  *
1143  * Note!  This is for pre-ILK only.
1144  */
1145 static void intel_enable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
1146 {
1147         int reg;
1148         u32 val;
1149
1150         /* No really, not for ILK+ */
1151         BUG_ON(dev_priv->info->gen >= 5);
1152
1153         /* PLL is protected by panel, make sure we can write it */
1154         if (IS_MOBILE(dev_priv->dev) && !IS_I830(dev_priv->dev))
1155                 assert_panel_unlocked(dev_priv, pipe);
1156
1157         reg = DPLL(pipe);
1158         val = I915_READ(reg);
1159         val |= DPLL_VCO_ENABLE;
1160
1161         /* We do this three times for luck */
1162         I915_WRITE(reg, val);
1163         POSTING_READ(reg);
1164         udelay(150); /* wait for warmup */
1165         I915_WRITE(reg, val);
1166         POSTING_READ(reg);
1167         udelay(150); /* wait for warmup */
1168         I915_WRITE(reg, val);
1169         POSTING_READ(reg);
1170         udelay(150); /* wait for warmup */
1171 }
1172
1173 /**
1174  * intel_disable_pll - disable a PLL
1175  * @dev_priv: i915 private structure
1176  * @pipe: pipe PLL to disable
1177  *
1178  * Disable the PLL for @pipe, making sure the pipe is off first.
1179  *
1180  * Note!  This is for pre-ILK only.
1181  */
1182 static void intel_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
1183 {
1184         int reg;
1185         u32 val;
1186
1187         /* Don't disable pipe A or pipe A PLLs if needed */
1188         if (pipe == PIPE_A && (dev_priv->quirks & QUIRK_PIPEA_FORCE))
1189                 return;
1190
1191         /* Make sure the pipe isn't still relying on us */
1192         assert_pipe_disabled(dev_priv, pipe);
1193
1194         reg = DPLL(pipe);
1195         val = I915_READ(reg);
1196         val &= ~DPLL_VCO_ENABLE;
1197         I915_WRITE(reg, val);
1198         POSTING_READ(reg);
1199 }
1200
1201 /**
1202  * intel_enable_pch_pll - enable PCH PLL
1203  * @dev_priv: i915 private structure
1204  * @pipe: pipe PLL to enable
1205  *
1206  * The PCH PLL needs to be enabled before the PCH transcoder, since it
1207  * drives the transcoder clock.
1208  */
1209 static void intel_enable_pch_pll(struct drm_i915_private *dev_priv,
1210                                  enum pipe pipe)
1211 {
1212         int reg;
1213         u32 val;
1214
1215         if (pipe > 1)
1216                 return;
1217
1218         /* PCH only available on ILK+ */
1219         BUG_ON(dev_priv->info->gen < 5);
1220
1221         /* PCH refclock must be enabled first */
1222         assert_pch_refclk_enabled(dev_priv);
1223
1224         reg = PCH_DPLL(pipe);
1225         val = I915_READ(reg);
1226         val |= DPLL_VCO_ENABLE;
1227         I915_WRITE(reg, val);
1228         POSTING_READ(reg);
1229         udelay(200);
1230 }
1231
1232 static void intel_disable_pch_pll(struct drm_i915_private *dev_priv,
1233                                   enum pipe pipe)
1234 {
1235         int reg;
1236         u32 val, pll_mask = TRANSC_DPLL_ENABLE | TRANSC_DPLLB_SEL,
1237                 pll_sel = TRANSC_DPLL_ENABLE;
1238
1239         if (pipe > 1)
1240                 return;
1241
1242         /* PCH only available on ILK+ */
1243         BUG_ON(dev_priv->info->gen < 5);
1244
1245         /* Make sure transcoder isn't still depending on us */
1246         assert_transcoder_disabled(dev_priv, pipe);
1247
1248         if (pipe == 0)
1249                 pll_sel |= TRANSC_DPLLA_SEL;
1250         else if (pipe == 1)
1251                 pll_sel |= TRANSC_DPLLB_SEL;
1252
1253
1254         if ((I915_READ(PCH_DPLL_SEL) & pll_mask) == pll_sel)
1255                 return;
1256
1257         reg = PCH_DPLL(pipe);
1258         val = I915_READ(reg);
1259         val &= ~DPLL_VCO_ENABLE;
1260         I915_WRITE(reg, val);
1261         POSTING_READ(reg);
1262         udelay(200);
1263 }
1264
1265 static void intel_enable_transcoder(struct drm_i915_private *dev_priv,
1266                                     enum pipe pipe)
1267 {
1268         int reg;
1269         u32 val;
1270
1271         /* PCH only available on ILK+ */
1272         BUG_ON(dev_priv->info->gen < 5);
1273
1274         /* Make sure PCH DPLL is enabled */
1275         assert_pch_pll_enabled(dev_priv, pipe);
1276
1277         /* FDI must be feeding us bits for PCH ports */
1278         assert_fdi_tx_enabled(dev_priv, pipe);
1279         assert_fdi_rx_enabled(dev_priv, pipe);
1280
1281         reg = TRANSCONF(pipe);
1282         val = I915_READ(reg);
1283
1284         if (HAS_PCH_IBX(dev_priv->dev)) {
1285                 /*
1286                  * make the BPC in transcoder be consistent with
1287                  * that in pipeconf reg.
1288                  */
1289                 val &= ~PIPE_BPC_MASK;
1290                 val |= I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK;
1291         }
1292         I915_WRITE(reg, val | TRANS_ENABLE);
1293         if (wait_for(I915_READ(reg) & TRANS_STATE_ENABLE, 100))
1294                 DRM_ERROR("failed to enable transcoder %d\n", pipe);
1295 }
1296
1297 static void intel_disable_transcoder(struct drm_i915_private *dev_priv,
1298                                      enum pipe pipe)
1299 {
1300         int reg;
1301         u32 val;
1302
1303         /* FDI relies on the transcoder */
1304         assert_fdi_tx_disabled(dev_priv, pipe);
1305         assert_fdi_rx_disabled(dev_priv, pipe);
1306
1307         /* Ports must be off as well */
1308         assert_pch_ports_disabled(dev_priv, pipe);
1309
1310         reg = TRANSCONF(pipe);
1311         val = I915_READ(reg);
1312         val &= ~TRANS_ENABLE;
1313         I915_WRITE(reg, val);
1314         /* wait for PCH transcoder off, transcoder state */
1315         if (wait_for((I915_READ(reg) & TRANS_STATE_ENABLE) == 0, 50))
1316                 DRM_ERROR("failed to disable transcoder %d\n", pipe);
1317 }
1318
1319 /**
1320  * intel_enable_pipe - enable a pipe, asserting requirements
1321  * @dev_priv: i915 private structure
1322  * @pipe: pipe to enable
1323  * @pch_port: on ILK+, is this pipe driving a PCH port or not
1324  *
1325  * Enable @pipe, making sure that various hardware specific requirements
1326  * are met, if applicable, e.g. PLL enabled, LVDS pairs enabled, etc.
1327  *
1328  * @pipe should be %PIPE_A or %PIPE_B.
1329  *
1330  * Will wait until the pipe is actually running (i.e. first vblank) before
1331  * returning.
1332  */
1333 static void intel_enable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe,
1334                               bool pch_port)
1335 {
1336         int reg;
1337         u32 val;
1338
1339         /*
1340          * A pipe without a PLL won't actually be able to drive bits from
1341          * a plane.  On ILK+ the pipe PLLs are integrated, so we don't
1342          * need the check.
1343          */
1344         if (!HAS_PCH_SPLIT(dev_priv->dev))
1345                 assert_pll_enabled(dev_priv, pipe);
1346         else {
1347                 if (pch_port) {
1348                         /* if driving the PCH, we need FDI enabled */
1349                         assert_fdi_rx_pll_enabled(dev_priv, pipe);
1350                         assert_fdi_tx_pll_enabled(dev_priv, pipe);
1351                 }
1352                 /* FIXME: assert CPU port conditions for SNB+ */
1353         }
1354
1355         reg = PIPECONF(pipe);
1356         val = I915_READ(reg);
1357         if (val & PIPECONF_ENABLE)
1358                 return;
1359
1360         I915_WRITE(reg, val | PIPECONF_ENABLE);
1361         intel_wait_for_vblank(dev_priv->dev, pipe);
1362 }
1363
1364 /**
1365  * intel_disable_pipe - disable a pipe, asserting requirements
1366  * @dev_priv: i915 private structure
1367  * @pipe: pipe to disable
1368  *
1369  * Disable @pipe, making sure that various hardware specific requirements
1370  * are met, if applicable, e.g. plane disabled, panel fitter off, etc.
1371  *
1372  * @pipe should be %PIPE_A or %PIPE_B.
1373  *
1374  * Will wait until the pipe has shut down before returning.
1375  */
1376 static void intel_disable_pipe(struct drm_i915_private *dev_priv,
1377                                enum pipe pipe)
1378 {
1379         int reg;
1380         u32 val;
1381
1382         /*
1383          * Make sure planes won't keep trying to pump pixels to us,
1384          * or we might hang the display.
1385          */
1386         assert_planes_disabled(dev_priv, pipe);
1387
1388         /* Don't disable pipe A or pipe A PLLs if needed */
1389         if (pipe == PIPE_A && (dev_priv->quirks & QUIRK_PIPEA_FORCE))
1390                 return;
1391
1392         reg = PIPECONF(pipe);
1393         val = I915_READ(reg);
1394         if ((val & PIPECONF_ENABLE) == 0)
1395                 return;
1396
1397         I915_WRITE(reg, val & ~PIPECONF_ENABLE);
1398         intel_wait_for_pipe_off(dev_priv->dev, pipe);
1399 }
1400
1401 /*
1402  * Plane regs are double buffered, going from enabled->disabled needs a
1403  * trigger in order to latch.  The display address reg provides this.
1404  */
1405 static void intel_flush_display_plane(struct drm_i915_private *dev_priv,
1406                                       enum plane plane)
1407 {
1408         I915_WRITE(DSPADDR(plane), I915_READ(DSPADDR(plane)));
1409         I915_WRITE(DSPSURF(plane), I915_READ(DSPSURF(plane)));
1410 }
1411
1412 /**
1413  * intel_enable_plane - enable a display plane on a given pipe
1414  * @dev_priv: i915 private structure
1415  * @plane: plane to enable
1416  * @pipe: pipe being fed
1417  *
1418  * Enable @plane on @pipe, making sure that @pipe is running first.
1419  */
1420 static void intel_enable_plane(struct drm_i915_private *dev_priv,
1421                                enum plane plane, enum pipe pipe)
1422 {
1423         int reg;
1424         u32 val;
1425
1426         /* If the pipe isn't enabled, we can't pump pixels and may hang */
1427         assert_pipe_enabled(dev_priv, pipe);
1428
1429         reg = DSPCNTR(plane);
1430         val = I915_READ(reg);
1431         if (val & DISPLAY_PLANE_ENABLE)
1432                 return;
1433
1434         I915_WRITE(reg, val | DISPLAY_PLANE_ENABLE);
1435         intel_flush_display_plane(dev_priv, plane);
1436         intel_wait_for_vblank(dev_priv->dev, pipe);
1437 }
1438
1439 /**
1440  * intel_disable_plane - disable a display plane
1441  * @dev_priv: i915 private structure
1442  * @plane: plane to disable
1443  * @pipe: pipe consuming the data
1444  *
1445  * Disable @plane; should be an independent operation.
1446  */
1447 static void intel_disable_plane(struct drm_i915_private *dev_priv,
1448                                 enum plane plane, enum pipe pipe)
1449 {
1450         int reg;
1451         u32 val;
1452
1453         reg = DSPCNTR(plane);
1454         val = I915_READ(reg);
1455         if ((val & DISPLAY_PLANE_ENABLE) == 0)
1456                 return;
1457
1458         I915_WRITE(reg, val & ~DISPLAY_PLANE_ENABLE);
1459         intel_flush_display_plane(dev_priv, plane);
1460         intel_wait_for_vblank(dev_priv->dev, pipe);
1461 }
1462
1463 static void disable_pch_dp(struct drm_i915_private *dev_priv,
1464                            enum pipe pipe, int reg, u32 port_sel)
1465 {
1466         u32 val = I915_READ(reg);
1467         if (dp_pipe_enabled(dev_priv, pipe, port_sel, val)) {
1468                 DRM_DEBUG_KMS("Disabling pch dp %x on pipe %d\n", reg, pipe);
1469                 I915_WRITE(reg, val & ~DP_PORT_EN);
1470         }
1471 }
1472
1473 static void disable_pch_hdmi(struct drm_i915_private *dev_priv,
1474                              enum pipe pipe, int reg)
1475 {
1476         u32 val = I915_READ(reg);
1477         if (hdmi_pipe_enabled(dev_priv, val, pipe)) {
1478                 DRM_DEBUG_KMS("Disabling pch HDMI %x on pipe %d\n",
1479                               reg, pipe);
1480                 I915_WRITE(reg, val & ~PORT_ENABLE);
1481         }
1482 }
1483
1484 /* Disable any ports connected to this transcoder */
1485 static void intel_disable_pch_ports(struct drm_i915_private *dev_priv,
1486                                     enum pipe pipe)
1487 {
1488         u32 reg, val;
1489
1490         val = I915_READ(PCH_PP_CONTROL);
1491         I915_WRITE(PCH_PP_CONTROL, val | PANEL_UNLOCK_REGS);
1492
1493         disable_pch_dp(dev_priv, pipe, PCH_DP_B, TRANS_DP_PORT_SEL_B);
1494         disable_pch_dp(dev_priv, pipe, PCH_DP_C, TRANS_DP_PORT_SEL_C);
1495         disable_pch_dp(dev_priv, pipe, PCH_DP_D, TRANS_DP_PORT_SEL_D);
1496
1497         reg = PCH_ADPA;
1498         val = I915_READ(reg);
1499         if (adpa_pipe_enabled(dev_priv, val, pipe))
1500                 I915_WRITE(reg, val & ~ADPA_DAC_ENABLE);
1501
1502         reg = PCH_LVDS;
1503         val = I915_READ(reg);
1504         if (lvds_pipe_enabled(dev_priv, val, pipe)) {
1505                 DRM_DEBUG_KMS("disable lvds on pipe %d val 0x%08x\n", pipe, val);
1506                 I915_WRITE(reg, val & ~LVDS_PORT_EN);
1507                 POSTING_READ(reg);
1508                 udelay(100);
1509         }
1510
1511         disable_pch_hdmi(dev_priv, pipe, HDMIB);
1512         disable_pch_hdmi(dev_priv, pipe, HDMIC);
1513         disable_pch_hdmi(dev_priv, pipe, HDMID);
1514 }
1515
1516 static void i8xx_disable_fbc(struct drm_device *dev)
1517 {
1518         struct drm_i915_private *dev_priv = dev->dev_private;
1519         u32 fbc_ctl;
1520
1521         /* Disable compression */
1522         fbc_ctl = I915_READ(FBC_CONTROL);
1523         if ((fbc_ctl & FBC_CTL_EN) == 0)
1524                 return;
1525
1526         fbc_ctl &= ~FBC_CTL_EN;
1527         I915_WRITE(FBC_CONTROL, fbc_ctl);
1528
1529         /* Wait for compressing bit to clear */
1530         if (wait_for((I915_READ(FBC_STATUS) & FBC_STAT_COMPRESSING) == 0, 10)) {
1531                 DRM_DEBUG_KMS("FBC idle timed out\n");
1532                 return;
1533         }
1534
1535         DRM_DEBUG_KMS("disabled FBC\n");
1536 }
1537
1538 static void i8xx_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
1539 {
1540         struct drm_device *dev = crtc->dev;
1541         struct drm_i915_private *dev_priv = dev->dev_private;
1542         struct drm_framebuffer *fb = crtc->fb;
1543         struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
1544         struct drm_i915_gem_object *obj = intel_fb->obj;
1545         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
1546         int cfb_pitch;
1547         int plane, i;
1548         u32 fbc_ctl, fbc_ctl2;
1549
1550         cfb_pitch = dev_priv->cfb_size / FBC_LL_SIZE;
1551         if (fb->pitches[0] < cfb_pitch)
1552                 cfb_pitch = fb->pitches[0];
1553
1554         /* FBC_CTL wants 64B units */
1555         cfb_pitch = (cfb_pitch / 64) - 1;
1556         plane = intel_crtc->plane == 0 ? FBC_CTL_PLANEA : FBC_CTL_PLANEB;
1557
1558         /* Clear old tags */
1559         for (i = 0; i < (FBC_LL_SIZE / 32) + 1; i++)
1560                 I915_WRITE(FBC_TAG + (i * 4), 0);
1561
1562         /* Set it up... */
1563         fbc_ctl2 = FBC_CTL_FENCE_DBL | FBC_CTL_IDLE_IMM | FBC_CTL_CPU_FENCE;
1564         fbc_ctl2 |= plane;
1565         I915_WRITE(FBC_CONTROL2, fbc_ctl2);
1566         I915_WRITE(FBC_FENCE_OFF, crtc->y);
1567
1568         /* enable it... */
1569         fbc_ctl = FBC_CTL_EN | FBC_CTL_PERIODIC;
1570         if (IS_I945GM(dev))
1571                 fbc_ctl |= FBC_CTL_C3_IDLE; /* 945 needs special SR handling */
1572         fbc_ctl |= (cfb_pitch & 0xff) << FBC_CTL_STRIDE_SHIFT;
1573         fbc_ctl |= (interval & 0x2fff) << FBC_CTL_INTERVAL_SHIFT;
1574         fbc_ctl |= obj->fence_reg;
1575         I915_WRITE(FBC_CONTROL, fbc_ctl);
1576
1577         DRM_DEBUG_KMS("enabled FBC, pitch %d, yoff %d, plane %d, ",
1578                       cfb_pitch, crtc->y, intel_crtc->plane);
1579 }
1580
1581 static bool i8xx_fbc_enabled(struct drm_device *dev)
1582 {
1583         struct drm_i915_private *dev_priv = dev->dev_private;
1584
1585         return I915_READ(FBC_CONTROL) & FBC_CTL_EN;
1586 }
1587
1588 static void g4x_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
1589 {
1590         struct drm_device *dev = crtc->dev;
1591         struct drm_i915_private *dev_priv = dev->dev_private;
1592         struct drm_framebuffer *fb = crtc->fb;
1593         struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
1594         struct drm_i915_gem_object *obj = intel_fb->obj;
1595         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
1596         int plane = intel_crtc->plane == 0 ? DPFC_CTL_PLANEA : DPFC_CTL_PLANEB;
1597         unsigned long stall_watermark = 200;
1598         u32 dpfc_ctl;
1599
1600         dpfc_ctl = plane | DPFC_SR_EN | DPFC_CTL_LIMIT_1X;
1601         dpfc_ctl |= DPFC_CTL_FENCE_EN | obj->fence_reg;
1602         I915_WRITE(DPFC_CHICKEN, DPFC_HT_MODIFY);
1603
1604         I915_WRITE(DPFC_RECOMP_CTL, DPFC_RECOMP_STALL_EN |
1605                    (stall_watermark << DPFC_RECOMP_STALL_WM_SHIFT) |
1606                    (interval << DPFC_RECOMP_TIMER_COUNT_SHIFT));
1607         I915_WRITE(DPFC_FENCE_YOFF, crtc->y);
1608
1609         /* enable it... */
1610         I915_WRITE(DPFC_CONTROL, I915_READ(DPFC_CONTROL) | DPFC_CTL_EN);
1611
1612         DRM_DEBUG_KMS("enabled fbc on plane %d\n", intel_crtc->plane);
1613 }
1614
1615 static void g4x_disable_fbc(struct drm_device *dev)
1616 {
1617         struct drm_i915_private *dev_priv = dev->dev_private;
1618         u32 dpfc_ctl;
1619
1620         /* Disable compression */
1621         dpfc_ctl = I915_READ(DPFC_CONTROL);
1622         if (dpfc_ctl & DPFC_CTL_EN) {
1623                 dpfc_ctl &= ~DPFC_CTL_EN;
1624                 I915_WRITE(DPFC_CONTROL, dpfc_ctl);
1625
1626                 DRM_DEBUG_KMS("disabled FBC\n");
1627         }
1628 }
1629
1630 static bool g4x_fbc_enabled(struct drm_device *dev)
1631 {
1632         struct drm_i915_private *dev_priv = dev->dev_private;
1633
1634         return I915_READ(DPFC_CONTROL) & DPFC_CTL_EN;
1635 }
1636
1637 static void sandybridge_blit_fbc_update(struct drm_device *dev)
1638 {
1639         struct drm_i915_private *dev_priv = dev->dev_private;
1640         u32 blt_ecoskpd;
1641
1642         /* Make sure blitter notifies FBC of writes */
1643         gen6_gt_force_wake_get(dev_priv);
1644         blt_ecoskpd = I915_READ(GEN6_BLITTER_ECOSKPD);
1645         blt_ecoskpd |= GEN6_BLITTER_FBC_NOTIFY <<
1646                 GEN6_BLITTER_LOCK_SHIFT;
1647         I915_WRITE(GEN6_BLITTER_ECOSKPD, blt_ecoskpd);
1648         blt_ecoskpd |= GEN6_BLITTER_FBC_NOTIFY;
1649         I915_WRITE(GEN6_BLITTER_ECOSKPD, blt_ecoskpd);
1650         blt_ecoskpd &= ~(GEN6_BLITTER_FBC_NOTIFY <<
1651                          GEN6_BLITTER_LOCK_SHIFT);
1652         I915_WRITE(GEN6_BLITTER_ECOSKPD, blt_ecoskpd);
1653         POSTING_READ(GEN6_BLITTER_ECOSKPD);
1654         gen6_gt_force_wake_put(dev_priv);
1655 }
1656
1657 static void ironlake_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
1658 {
1659         struct drm_device *dev = crtc->dev;
1660         struct drm_i915_private *dev_priv = dev->dev_private;
1661         struct drm_framebuffer *fb = crtc->fb;
1662         struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
1663         struct drm_i915_gem_object *obj = intel_fb->obj;
1664         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
1665         int plane = intel_crtc->plane == 0 ? DPFC_CTL_PLANEA : DPFC_CTL_PLANEB;
1666         unsigned long stall_watermark = 200;
1667         u32 dpfc_ctl;
1668
1669         dpfc_ctl = I915_READ(ILK_DPFC_CONTROL);
1670         dpfc_ctl &= DPFC_RESERVED;
1671         dpfc_ctl |= (plane | DPFC_CTL_LIMIT_1X);
1672         /* Set persistent mode for front-buffer rendering, ala X. */
1673         dpfc_ctl |= DPFC_CTL_PERSISTENT_MODE;
1674         dpfc_ctl |= (DPFC_CTL_FENCE_EN | obj->fence_reg);
1675         I915_WRITE(ILK_DPFC_CHICKEN, DPFC_HT_MODIFY);
1676
1677         I915_WRITE(ILK_DPFC_RECOMP_CTL, DPFC_RECOMP_STALL_EN |
1678                    (stall_watermark << DPFC_RECOMP_STALL_WM_SHIFT) |
1679                    (interval << DPFC_RECOMP_TIMER_COUNT_SHIFT));
1680         I915_WRITE(ILK_DPFC_FENCE_YOFF, crtc->y);
1681         I915_WRITE(ILK_FBC_RT_BASE, obj->gtt_offset | ILK_FBC_RT_VALID);
1682         /* enable it... */
1683         I915_WRITE(ILK_DPFC_CONTROL, dpfc_ctl | DPFC_CTL_EN);
1684
1685         if (IS_GEN6(dev)) {
1686                 I915_WRITE(SNB_DPFC_CTL_SA,
1687                            SNB_CPU_FENCE_ENABLE | obj->fence_reg);
1688                 I915_WRITE(DPFC_CPU_FENCE_OFFSET, crtc->y);
1689                 sandybridge_blit_fbc_update(dev);
1690         }
1691
1692         DRM_DEBUG_KMS("enabled fbc on plane %d\n", intel_crtc->plane);
1693 }
1694
1695 static void ironlake_disable_fbc(struct drm_device *dev)
1696 {
1697         struct drm_i915_private *dev_priv = dev->dev_private;
1698         u32 dpfc_ctl;
1699
1700         /* Disable compression */
1701         dpfc_ctl = I915_READ(ILK_DPFC_CONTROL);
1702         if (dpfc_ctl & DPFC_CTL_EN) {
1703                 dpfc_ctl &= ~DPFC_CTL_EN;
1704                 I915_WRITE(ILK_DPFC_CONTROL, dpfc_ctl);
1705
1706                 DRM_DEBUG_KMS("disabled FBC\n");
1707         }
1708 }
1709
1710 static bool ironlake_fbc_enabled(struct drm_device *dev)
1711 {
1712         struct drm_i915_private *dev_priv = dev->dev_private;
1713
1714         return I915_READ(ILK_DPFC_CONTROL) & DPFC_CTL_EN;
1715 }
1716
1717 bool intel_fbc_enabled(struct drm_device *dev)
1718 {
1719         struct drm_i915_private *dev_priv = dev->dev_private;
1720
1721         if (!dev_priv->display.fbc_enabled)
1722                 return false;
1723
1724         return dev_priv->display.fbc_enabled(dev);
1725 }
1726
1727 static void intel_fbc_work_fn(struct work_struct *__work)
1728 {
1729         struct intel_fbc_work *work =
1730                 container_of(to_delayed_work(__work),
1731                              struct intel_fbc_work, work);
1732         struct drm_device *dev = work->crtc->dev;
1733         struct drm_i915_private *dev_priv = dev->dev_private;
1734
1735         mutex_lock(&dev->struct_mutex);
1736         if (work == dev_priv->fbc_work) {
1737                 /* Double check that we haven't switched fb without cancelling
1738                  * the prior work.
1739                  */
1740                 if (work->crtc->fb == work->fb) {
1741                         dev_priv->display.enable_fbc(work->crtc,
1742                                                      work->interval);
1743
1744                         dev_priv->cfb_plane = to_intel_crtc(work->crtc)->plane;
1745                         dev_priv->cfb_fb = work->crtc->fb->base.id;
1746                         dev_priv->cfb_y = work->crtc->y;
1747                 }
1748
1749                 dev_priv->fbc_work = NULL;
1750         }
1751         mutex_unlock(&dev->struct_mutex);
1752
1753         kfree(work);
1754 }
1755
1756 static void intel_cancel_fbc_work(struct drm_i915_private *dev_priv)
1757 {
1758         if (dev_priv->fbc_work == NULL)
1759                 return;
1760
1761         DRM_DEBUG_KMS("cancelling pending FBC enable\n");
1762
1763         /* Synchronisation is provided by struct_mutex and checking of
1764          * dev_priv->fbc_work, so we can perform the cancellation
1765          * entirely asynchronously.
1766          */
1767         if (cancel_delayed_work(&dev_priv->fbc_work->work))
1768                 /* tasklet was killed before being run, clean up */
1769                 kfree(dev_priv->fbc_work);
1770
1771         /* Mark the work as no longer wanted so that if it does
1772          * wake-up (because the work was already running and waiting
1773          * for our mutex), it will discover that is no longer
1774          * necessary to run.
1775          */
1776         dev_priv->fbc_work = NULL;
1777 }
1778
1779 static void intel_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
1780 {
1781         struct intel_fbc_work *work;
1782         struct drm_device *dev = crtc->dev;
1783         struct drm_i915_private *dev_priv = dev->dev_private;
1784
1785         if (!dev_priv->display.enable_fbc)
1786                 return;
1787
1788         intel_cancel_fbc_work(dev_priv);
1789
1790         work = kzalloc(sizeof *work, GFP_KERNEL);
1791         if (work == NULL) {
1792                 dev_priv->display.enable_fbc(crtc, interval);
1793                 return;
1794         }
1795
1796         work->crtc = crtc;
1797         work->fb = crtc->fb;
1798         work->interval = interval;
1799         INIT_DELAYED_WORK(&work->work, intel_fbc_work_fn);
1800
1801         dev_priv->fbc_work = work;
1802
1803         DRM_DEBUG_KMS("scheduling delayed FBC enable\n");
1804
1805         /* Delay the actual enabling to let pageflipping cease and the
1806          * display to settle before starting the compression. Note that
1807          * this delay also serves a second purpose: it allows for a
1808          * vblank to pass after disabling the FBC before we attempt
1809          * to modify the control registers.
1810          *
1811          * A more complicated solution would involve tracking vblanks
1812          * following the termination of the page-flipping sequence
1813          * and indeed performing the enable as a co-routine and not
1814          * waiting synchronously upon the vblank.
1815          */
1816         schedule_delayed_work(&work->work, msecs_to_jiffies(50));
1817 }
1818
1819 void intel_disable_fbc(struct drm_device *dev)
1820 {
1821         struct drm_i915_private *dev_priv = dev->dev_private;
1822
1823         intel_cancel_fbc_work(dev_priv);
1824
1825         if (!dev_priv->display.disable_fbc)
1826                 return;
1827
1828         dev_priv->display.disable_fbc(dev);
1829         dev_priv->cfb_plane = -1;
1830 }
1831
1832 /**
1833  * intel_update_fbc - enable/disable FBC as needed
1834  * @dev: the drm_device
1835  *
1836  * Set up the framebuffer compression hardware at mode set time.  We
1837  * enable it if possible:
1838  *   - plane A only (on pre-965)
1839  *   - no pixel mulitply/line duplication
1840  *   - no alpha buffer discard
1841  *   - no dual wide
1842  *   - framebuffer <= 2048 in width, 1536 in height
1843  *
1844  * We can't assume that any compression will take place (worst case),
1845  * so the compressed buffer has to be the same size as the uncompressed
1846  * one.  It also must reside (along with the line length buffer) in
1847  * stolen memory.
1848  *
1849  * We need to enable/disable FBC on a global basis.
1850  */
1851 static void intel_update_fbc(struct drm_device *dev)
1852 {
1853         struct drm_i915_private *dev_priv = dev->dev_private;
1854         struct drm_crtc *crtc = NULL, *tmp_crtc;
1855         struct intel_crtc *intel_crtc;
1856         struct drm_framebuffer *fb;
1857         struct intel_framebuffer *intel_fb;
1858         struct drm_i915_gem_object *obj;
1859         int enable_fbc;
1860
1861         DRM_DEBUG_KMS("\n");
1862
1863         if (!i915_powersave)
1864                 return;
1865
1866         if (!I915_HAS_FBC(dev))
1867                 return;
1868
1869         /*
1870          * If FBC is already on, we just have to verify that we can
1871          * keep it that way...
1872          * Need to disable if:
1873          *   - more than one pipe is active
1874          *   - changing FBC params (stride, fence, mode)
1875          *   - new fb is too large to fit in compressed buffer
1876          *   - going to an unsupported config (interlace, pixel multiply, etc.)
1877          */
1878         list_for_each_entry(tmp_crtc, &dev->mode_config.crtc_list, head) {
1879                 if (tmp_crtc->enabled && tmp_crtc->fb) {
1880                         if (crtc) {
1881                                 DRM_DEBUG_KMS("more than one pipe active, disabling compression\n");
1882                                 dev_priv->no_fbc_reason = FBC_MULTIPLE_PIPES;
1883                                 goto out_disable;
1884                         }
1885                         crtc = tmp_crtc;
1886                 }
1887         }
1888
1889         if (!crtc || crtc->fb == NULL) {
1890                 DRM_DEBUG_KMS("no output, disabling\n");
1891                 dev_priv->no_fbc_reason = FBC_NO_OUTPUT;
1892                 goto out_disable;
1893         }
1894
1895         intel_crtc = to_intel_crtc(crtc);
1896         fb = crtc->fb;
1897         intel_fb = to_intel_framebuffer(fb);
1898         obj = intel_fb->obj;
1899
1900         enable_fbc = i915_enable_fbc;
1901         if (enable_fbc < 0) {
1902                 DRM_DEBUG_KMS("fbc set to per-chip default\n");
1903                 enable_fbc = 1;
1904                 if (INTEL_INFO(dev)->gen <= 6)
1905                         enable_fbc = 0;
1906         }
1907         if (!enable_fbc) {
1908                 DRM_DEBUG_KMS("fbc disabled per module param\n");
1909                 dev_priv->no_fbc_reason = FBC_MODULE_PARAM;
1910                 goto out_disable;
1911         }
1912         if (intel_fb->obj->base.size > dev_priv->cfb_size) {
1913                 DRM_DEBUG_KMS("framebuffer too large, disabling "
1914                               "compression\n");
1915                 dev_priv->no_fbc_reason = FBC_STOLEN_TOO_SMALL;
1916                 goto out_disable;
1917         }
1918         if ((crtc->mode.flags & DRM_MODE_FLAG_INTERLACE) ||
1919             (crtc->mode.flags & DRM_MODE_FLAG_DBLSCAN)) {
1920                 DRM_DEBUG_KMS("mode incompatible with compression, "
1921                               "disabling\n");
1922                 dev_priv->no_fbc_reason = FBC_UNSUPPORTED_MODE;
1923                 goto out_disable;
1924         }
1925         if ((crtc->mode.hdisplay > 2048) ||
1926             (crtc->mode.vdisplay > 1536)) {
1927                 DRM_DEBUG_KMS("mode too large for compression, disabling\n");
1928                 dev_priv->no_fbc_reason = FBC_MODE_TOO_LARGE;
1929                 goto out_disable;
1930         }
1931         if ((IS_I915GM(dev) || IS_I945GM(dev)) && intel_crtc->plane != 0) {
1932                 DRM_DEBUG_KMS("plane not 0, disabling compression\n");
1933                 dev_priv->no_fbc_reason = FBC_BAD_PLANE;
1934                 goto out_disable;
1935         }
1936
1937         /* The use of a CPU fence is mandatory in order to detect writes
1938          * by the CPU to the scanout and trigger updates to the FBC.
1939          */
1940         if (obj->tiling_mode != I915_TILING_X ||
1941             obj->fence_reg == I915_FENCE_REG_NONE) {
1942                 DRM_DEBUG_KMS("framebuffer not tiled or fenced, disabling compression\n");
1943                 dev_priv->no_fbc_reason = FBC_NOT_TILED;
1944                 goto out_disable;
1945         }
1946
1947         /* If the kernel debugger is active, always disable compression */
1948         if (in_dbg_master())
1949                 goto out_disable;
1950
1951         /* If the scanout has not changed, don't modify the FBC settings.
1952          * Note that we make the fundamental assumption that the fb->obj
1953          * cannot be unpinned (and have its GTT offset and fence revoked)
1954          * without first being decoupled from the scanout and FBC disabled.
1955          */
1956         if (dev_priv->cfb_plane == intel_crtc->plane &&
1957             dev_priv->cfb_fb == fb->base.id &&
1958             dev_priv->cfb_y == crtc->y)
1959                 return;
1960
1961         if (intel_fbc_enabled(dev)) {
1962                 /* We update FBC along two paths, after changing fb/crtc
1963                  * configuration (modeswitching) and after page-flipping
1964                  * finishes. For the latter, we know that not only did
1965                  * we disable the FBC at the start of the page-flip
1966                  * sequence, but also more than one vblank has passed.
1967                  *
1968                  * For the former case of modeswitching, it is possible
1969                  * to switch between two FBC valid configurations
1970                  * instantaneously so we do need to disable the FBC
1971                  * before we can modify its control registers. We also
1972                  * have to wait for the next vblank for that to take
1973                  * effect. However, since we delay enabling FBC we can
1974                  * assume that a vblank has passed since disabling and
1975                  * that we can safely alter the registers in the deferred
1976                  * callback.
1977                  *
1978                  * In the scenario that we go from a valid to invalid
1979                  * and then back to valid FBC configuration we have
1980                  * no strict enforcement that a vblank occurred since
1981                  * disabling the FBC. However, along all current pipe
1982                  * disabling paths we do need to wait for a vblank at
1983                  * some point. And we wait before enabling FBC anyway.
1984                  */
1985                 DRM_DEBUG_KMS("disabling active FBC for update\n");
1986                 intel_disable_fbc(dev);
1987         }
1988
1989         intel_enable_fbc(crtc, 500);
1990         return;
1991
1992 out_disable:
1993         /* Multiple disables should be harmless */
1994         if (intel_fbc_enabled(dev)) {
1995                 DRM_DEBUG_KMS("unsupported config, disabling FBC\n");
1996                 intel_disable_fbc(dev);
1997         }
1998 }
1999
2000 int
2001 intel_pin_and_fence_fb_obj(struct drm_device *dev,
2002                            struct drm_i915_gem_object *obj,
2003                            struct intel_ring_buffer *pipelined)
2004 {
2005         struct drm_i915_private *dev_priv = dev->dev_private;
2006         u32 alignment;
2007         int ret;
2008
2009         switch (obj->tiling_mode) {
2010         case I915_TILING_NONE:
2011                 if (IS_BROADWATER(dev) || IS_CRESTLINE(dev))
2012                         alignment = 128 * 1024;
2013                 else if (INTEL_INFO(dev)->gen >= 4)
2014                         alignment = 4 * 1024;
2015                 else
2016                         alignment = 64 * 1024;
2017                 break;
2018         case I915_TILING_X:
2019                 /* pin() will align the object as required by fence */
2020                 alignment = 0;
2021                 break;
2022         case I915_TILING_Y:
2023                 /* FIXME: Is this true? */
2024                 DRM_ERROR("Y tiled not allowed for scan out buffers\n");
2025                 return -EINVAL;
2026         default:
2027                 BUG();
2028         }
2029
2030         dev_priv->mm.interruptible = false;
2031         ret = i915_gem_object_pin_to_display_plane(obj, alignment, pipelined);
2032         if (ret)
2033                 goto err_interruptible;
2034
2035         /* Install a fence for tiled scan-out. Pre-i965 always needs a
2036          * fence, whereas 965+ only requires a fence if using
2037          * framebuffer compression.  For simplicity, we always install
2038          * a fence as the cost is not that onerous.
2039          */
2040         if (obj->tiling_mode != I915_TILING_NONE) {
2041                 ret = i915_gem_object_get_fence(obj, pipelined);
2042                 if (ret)
2043                         goto err_unpin;
2044
2045                 i915_gem_object_pin_fence(obj);
2046         }
2047
2048         dev_priv->mm.interruptible = true;
2049         return 0;
2050
2051 err_unpin:
2052         i915_gem_object_unpin(obj);
2053 err_interruptible:
2054         dev_priv->mm.interruptible = true;
2055         return ret;
2056 }
2057
2058 void intel_unpin_fb_obj(struct drm_i915_gem_object *obj)
2059 {
2060         i915_gem_object_unpin_fence(obj);
2061         i915_gem_object_unpin(obj);
2062 }
2063
2064 static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
2065                              int x, int y)
2066 {
2067         struct drm_device *dev = crtc->dev;
2068         struct drm_i915_private *dev_priv = dev->dev_private;
2069         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2070         struct intel_framebuffer *intel_fb;
2071         struct drm_i915_gem_object *obj;
2072         int plane = intel_crtc->plane;
2073         unsigned long Start, Offset;
2074         u32 dspcntr;
2075         u32 reg;
2076
2077         switch (plane) {
2078         case 0:
2079         case 1:
2080                 break;
2081         default:
2082                 DRM_ERROR("Can't update plane %d in SAREA\n", plane);
2083                 return -EINVAL;
2084         }
2085
2086         intel_fb = to_intel_framebuffer(fb);
2087         obj = intel_fb->obj;
2088
2089         reg = DSPCNTR(plane);
2090         dspcntr = I915_READ(reg);
2091         /* Mask out pixel format bits in case we change it */
2092         dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
2093         switch (fb->bits_per_pixel) {
2094         case 8:
2095                 dspcntr |= DISPPLANE_8BPP;
2096                 break;
2097         case 16:
2098                 if (fb->depth == 15)
2099                         dspcntr |= DISPPLANE_15_16BPP;
2100                 else
2101                         dspcntr |= DISPPLANE_16BPP;
2102                 break;
2103         case 24:
2104         case 32:
2105                 dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
2106                 break;
2107         default:
2108                 DRM_ERROR("Unknown color depth %d\n", fb->bits_per_pixel);
2109                 return -EINVAL;
2110         }
2111         if (INTEL_INFO(dev)->gen >= 4) {
2112                 if (obj->tiling_mode != I915_TILING_NONE)
2113                         dspcntr |= DISPPLANE_TILED;
2114                 else
2115                         dspcntr &= ~DISPPLANE_TILED;
2116         }
2117
2118         I915_WRITE(reg, dspcntr);
2119
2120         Start = obj->gtt_offset;
2121         Offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
2122
2123         DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
2124                       Start, Offset, x, y, fb->pitches[0]);
2125         I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
2126         if (INTEL_INFO(dev)->gen >= 4) {
2127                 I915_WRITE(DSPSURF(plane), Start);
2128                 I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
2129                 I915_WRITE(DSPADDR(plane), Offset);
2130         } else
2131                 I915_WRITE(DSPADDR(plane), Start + Offset);
2132         POSTING_READ(reg);
2133
2134         return 0;
2135 }
2136
2137 static int ironlake_update_plane(struct drm_crtc *crtc,
2138                                  struct drm_framebuffer *fb, int x, int y)
2139 {
2140         struct drm_device *dev = crtc->dev;
2141         struct drm_i915_private *dev_priv = dev->dev_private;
2142         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2143         struct intel_framebuffer *intel_fb;
2144         struct drm_i915_gem_object *obj;
2145         int plane = intel_crtc->plane;
2146         unsigned long Start, Offset;
2147         u32 dspcntr;
2148         u32 reg;
2149
2150         switch (plane) {
2151         case 0:
2152         case 1:
2153         case 2:
2154                 break;
2155         default:
2156                 DRM_ERROR("Can't update plane %d in SAREA\n", plane);
2157                 return -EINVAL;
2158         }
2159
2160         intel_fb = to_intel_framebuffer(fb);
2161         obj = intel_fb->obj;
2162
2163         reg = DSPCNTR(plane);
2164         dspcntr = I915_READ(reg);
2165         /* Mask out pixel format bits in case we change it */
2166         dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
2167         switch (fb->bits_per_pixel) {
2168         case 8:
2169                 dspcntr |= DISPPLANE_8BPP;
2170                 break;
2171         case 16:
2172                 if (fb->depth != 16)
2173                         return -EINVAL;
2174
2175                 dspcntr |= DISPPLANE_16BPP;
2176                 break;
2177         case 24:
2178         case 32:
2179                 if (fb->depth == 24)
2180                         dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
2181                 else if (fb->depth == 30)
2182                         dspcntr |= DISPPLANE_32BPP_30BIT_NO_ALPHA;
2183                 else
2184                         return -EINVAL;
2185                 break;
2186         default:
2187                 DRM_ERROR("Unknown color depth %d\n", fb->bits_per_pixel);
2188                 return -EINVAL;
2189         }
2190
2191         if (obj->tiling_mode != I915_TILING_NONE)
2192                 dspcntr |= DISPPLANE_TILED;
2193         else
2194                 dspcntr &= ~DISPPLANE_TILED;
2195
2196         /* must disable */
2197         dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
2198
2199         I915_WRITE(reg, dspcntr);
2200
2201         Start = obj->gtt_offset;
2202         Offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
2203
2204         DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
2205                       Start, Offset, x, y, fb->pitches[0]);
2206         I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
2207         I915_WRITE(DSPSURF(plane), Start);
2208         I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
2209         I915_WRITE(DSPADDR(plane), Offset);
2210         POSTING_READ(reg);
2211
2212         return 0;
2213 }
2214
2215 /* Assume fb object is pinned & idle & fenced and just update base pointers */
2216 static int
2217 intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb,
2218                            int x, int y, enum mode_set_atomic state)
2219 {
2220         struct drm_device *dev = crtc->dev;
2221         struct drm_i915_private *dev_priv = dev->dev_private;
2222         int ret;
2223
2224         ret = dev_priv->display.update_plane(crtc, fb, x, y);
2225         if (ret)
2226                 return ret;
2227
2228         intel_update_fbc(dev);
2229         intel_increase_pllclock(crtc);
2230
2231         return 0;
2232 }
2233
2234 static int
2235 intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
2236                     struct drm_framebuffer *old_fb)
2237 {
2238         struct drm_device *dev = crtc->dev;
2239         struct drm_i915_master_private *master_priv;
2240         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2241         int ret;
2242
2243         /* no fb bound */
2244         if (!crtc->fb) {
2245                 DRM_ERROR("No FB bound\n");
2246                 return 0;
2247         }
2248
2249         switch (intel_crtc->plane) {
2250         case 0:
2251         case 1:
2252                 break;
2253         case 2:
2254                 if (IS_IVYBRIDGE(dev))
2255                         break;
2256                 /* fall through otherwise */
2257         default:
2258                 DRM_ERROR("no plane for crtc\n");
2259                 return -EINVAL;
2260         }
2261
2262         mutex_lock(&dev->struct_mutex);
2263         ret = intel_pin_and_fence_fb_obj(dev,
2264                                          to_intel_framebuffer(crtc->fb)->obj,
2265                                          NULL);
2266         if (ret != 0) {
2267                 mutex_unlock(&dev->struct_mutex);
2268                 DRM_ERROR("pin & fence failed\n");
2269                 return ret;
2270         }
2271
2272         if (old_fb) {
2273                 struct drm_i915_private *dev_priv = dev->dev_private;
2274                 struct drm_i915_gem_object *obj = to_intel_framebuffer(old_fb)->obj;
2275
2276                 wait_event(dev_priv->pending_flip_queue,
2277                            atomic_read(&dev_priv->mm.wedged) ||
2278                            atomic_read(&obj->pending_flip) == 0);
2279
2280                 /* Big Hammer, we also need to ensure that any pending
2281                  * MI_WAIT_FOR_EVENT inside a user batch buffer on the
2282                  * current scanout is retired before unpinning the old
2283                  * framebuffer.
2284                  *
2285                  * This should only fail upon a hung GPU, in which case we
2286                  * can safely continue.
2287                  */
2288                 ret = i915_gem_object_finish_gpu(obj);
2289                 (void) ret;
2290         }
2291
2292         ret = intel_pipe_set_base_atomic(crtc, crtc->fb, x, y,
2293                                          LEAVE_ATOMIC_MODE_SET);
2294         if (ret) {
2295                 intel_unpin_fb_obj(to_intel_framebuffer(crtc->fb)->obj);
2296                 mutex_unlock(&dev->struct_mutex);
2297                 DRM_ERROR("failed to update base address\n");
2298                 return ret;
2299         }
2300
2301         if (old_fb) {
2302                 intel_wait_for_vblank(dev, intel_crtc->pipe);
2303                 intel_unpin_fb_obj(to_intel_framebuffer(old_fb)->obj);
2304         }
2305
2306         mutex_unlock(&dev->struct_mutex);
2307
2308         if (!dev->primary->master)
2309                 return 0;
2310
2311         master_priv = dev->primary->master->driver_priv;
2312         if (!master_priv->sarea_priv)
2313                 return 0;
2314
2315         if (intel_crtc->pipe) {
2316                 master_priv->sarea_priv->pipeB_x = x;
2317                 master_priv->sarea_priv->pipeB_y = y;
2318         } else {
2319                 master_priv->sarea_priv->pipeA_x = x;
2320                 master_priv->sarea_priv->pipeA_y = y;
2321         }
2322
2323         return 0;
2324 }
2325
2326 static void ironlake_set_pll_edp(struct drm_crtc *crtc, int clock)
2327 {
2328         struct drm_device *dev = crtc->dev;
2329         struct drm_i915_private *dev_priv = dev->dev_private;
2330         u32 dpa_ctl;
2331
2332         DRM_DEBUG_KMS("eDP PLL enable for clock %d\n", clock);
2333         dpa_ctl = I915_READ(DP_A);
2334         dpa_ctl &= ~DP_PLL_FREQ_MASK;
2335
2336         if (clock < 200000) {
2337                 u32 temp;
2338                 dpa_ctl |= DP_PLL_FREQ_160MHZ;
2339                 /* workaround for 160Mhz:
2340                    1) program 0x4600c bits 15:0 = 0x8124
2341                    2) program 0x46010 bit 0 = 1
2342                    3) program 0x46034 bit 24 = 1
2343                    4) program 0x64000 bit 14 = 1
2344                    */
2345                 temp = I915_READ(0x4600c);
2346                 temp &= 0xffff0000;
2347                 I915_WRITE(0x4600c, temp | 0x8124);
2348
2349                 temp = I915_READ(0x46010);
2350                 I915_WRITE(0x46010, temp | 1);
2351
2352                 temp = I915_READ(0x46034);
2353                 I915_WRITE(0x46034, temp | (1 << 24));
2354         } else {
2355                 dpa_ctl |= DP_PLL_FREQ_270MHZ;
2356         }
2357         I915_WRITE(DP_A, dpa_ctl);
2358
2359         POSTING_READ(DP_A);
2360         udelay(500);
2361 }
2362
2363 static void intel_fdi_normal_train(struct drm_crtc *crtc)
2364 {
2365         struct drm_device *dev = crtc->dev;
2366         struct drm_i915_private *dev_priv = dev->dev_private;
2367         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2368         int pipe = intel_crtc->pipe;
2369         u32 reg, temp;
2370
2371         /* enable normal train */
2372         reg = FDI_TX_CTL(pipe);
2373         temp = I915_READ(reg);
2374         if (IS_IVYBRIDGE(dev)) {
2375                 temp &= ~FDI_LINK_TRAIN_NONE_IVB;
2376                 temp |= FDI_LINK_TRAIN_NONE_IVB | FDI_TX_ENHANCE_FRAME_ENABLE;
2377         } else {
2378                 temp &= ~FDI_LINK_TRAIN_NONE;
2379                 temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE;
2380         }
2381         I915_WRITE(reg, temp);
2382
2383         reg = FDI_RX_CTL(pipe);
2384         temp = I915_READ(reg);
2385         if (HAS_PCH_CPT(dev)) {
2386                 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2387                 temp |= FDI_LINK_TRAIN_NORMAL_CPT;
2388         } else {
2389                 temp &= ~FDI_LINK_TRAIN_NONE;
2390                 temp |= FDI_LINK_TRAIN_NONE;
2391         }
2392         I915_WRITE(reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE);
2393
2394         /* wait one idle pattern time */
2395         POSTING_READ(reg);
2396         udelay(1000);
2397
2398         /* IVB wants error correction enabled */
2399         if (IS_IVYBRIDGE(dev))
2400                 I915_WRITE(reg, I915_READ(reg) | FDI_FS_ERRC_ENABLE |
2401                            FDI_FE_ERRC_ENABLE);
2402 }
2403
2404 static void cpt_phase_pointer_enable(struct drm_device *dev, int pipe)
2405 {
2406         struct drm_i915_private *dev_priv = dev->dev_private;
2407         u32 flags = I915_READ(SOUTH_CHICKEN1);
2408
2409         flags |= FDI_PHASE_SYNC_OVR(pipe);
2410         I915_WRITE(SOUTH_CHICKEN1, flags); /* once to unlock... */
2411         flags |= FDI_PHASE_SYNC_EN(pipe);
2412         I915_WRITE(SOUTH_CHICKEN1, flags); /* then again to enable */
2413         POSTING_READ(SOUTH_CHICKEN1);
2414 }
2415
2416 /* The FDI link training functions for ILK/Ibexpeak. */
2417 static void ironlake_fdi_link_train(struct drm_crtc *crtc)
2418 {
2419         struct drm_device *dev = crtc->dev;
2420         struct drm_i915_private *dev_priv = dev->dev_private;
2421         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2422         int pipe = intel_crtc->pipe;
2423         int plane = intel_crtc->plane;
2424         u32 reg, temp, tries;
2425
2426         /* FDI needs bits from pipe & plane first */
2427         assert_pipe_enabled(dev_priv, pipe);
2428         assert_plane_enabled(dev_priv, plane);
2429
2430         /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
2431            for train result */
2432         reg = FDI_RX_IMR(pipe);
2433         temp = I915_READ(reg);
2434         temp &= ~FDI_RX_SYMBOL_LOCK;
2435         temp &= ~FDI_RX_BIT_LOCK;
2436         I915_WRITE(reg, temp);
2437         I915_READ(reg);
2438         udelay(150);
2439
2440         /* enable CPU FDI TX and PCH FDI RX */
2441         reg = FDI_TX_CTL(pipe);
2442         temp = I915_READ(reg);
2443         temp &= ~(7 << 19);
2444         temp |= (intel_crtc->fdi_lanes - 1) << 19;
2445         temp &= ~FDI_LINK_TRAIN_NONE;
2446         temp |= FDI_LINK_TRAIN_PATTERN_1;
2447         I915_WRITE(reg, temp | FDI_TX_ENABLE);
2448
2449         reg = FDI_RX_CTL(pipe);
2450         temp = I915_READ(reg);
2451         temp &= ~FDI_LINK_TRAIN_NONE;
2452         temp |= FDI_LINK_TRAIN_PATTERN_1;
2453         I915_WRITE(reg, temp | FDI_RX_ENABLE);
2454
2455         POSTING_READ(reg);
2456         udelay(150);
2457
2458         /* Ironlake workaround, enable clock pointer after FDI enable*/
2459         if (HAS_PCH_IBX(dev)) {
2460                 I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
2461                 I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR |
2462                            FDI_RX_PHASE_SYNC_POINTER_EN);
2463         }
2464
2465         reg = FDI_RX_IIR(pipe);
2466         for (tries = 0; tries < 5; tries++) {
2467                 temp = I915_READ(reg);
2468                 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2469
2470                 if ((temp & FDI_RX_BIT_LOCK)) {
2471                         DRM_DEBUG_KMS("FDI train 1 done.\n");
2472                         I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
2473                         break;
2474                 }
2475         }
2476         if (tries == 5)
2477                 DRM_ERROR("FDI train 1 fail!\n");
2478
2479         /* Train 2 */
2480         reg = FDI_TX_CTL(pipe);
2481         temp = I915_READ(reg);
2482         temp &= ~FDI_LINK_TRAIN_NONE;
2483         temp |= FDI_LINK_TRAIN_PATTERN_2;
2484         I915_WRITE(reg, temp);
2485
2486         reg = FDI_RX_CTL(pipe);
2487         temp = I915_READ(reg);
2488         temp &= ~FDI_LINK_TRAIN_NONE;
2489         temp |= FDI_LINK_TRAIN_PATTERN_2;
2490         I915_WRITE(reg, temp);
2491
2492         POSTING_READ(reg);
2493         udelay(150);
2494
2495         reg = FDI_RX_IIR(pipe);
2496         for (tries = 0; tries < 5; tries++) {
2497                 temp = I915_READ(reg);
2498                 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2499
2500                 if (temp & FDI_RX_SYMBOL_LOCK) {
2501                         I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
2502                         DRM_DEBUG_KMS("FDI train 2 done.\n");
2503                         break;
2504                 }
2505         }
2506         if (tries == 5)
2507                 DRM_ERROR("FDI train 2 fail!\n");
2508
2509         DRM_DEBUG_KMS("FDI train done\n");
2510
2511 }
2512
2513 static const int snb_b_fdi_train_param[] = {
2514         FDI_LINK_TRAIN_400MV_0DB_SNB_B,
2515         FDI_LINK_TRAIN_400MV_6DB_SNB_B,
2516         FDI_LINK_TRAIN_600MV_3_5DB_SNB_B,
2517         FDI_LINK_TRAIN_800MV_0DB_SNB_B,
2518 };
2519
2520 /* The FDI link training functions for SNB/Cougarpoint. */
2521 static void gen6_fdi_link_train(struct drm_crtc *crtc)
2522 {
2523         struct drm_device *dev = crtc->dev;
2524         struct drm_i915_private *dev_priv = dev->dev_private;
2525         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2526         int pipe = intel_crtc->pipe;
2527         u32 reg, temp, i;
2528
2529         /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
2530            for train result */
2531         reg = FDI_RX_IMR(pipe);
2532         temp = I915_READ(reg);
2533         temp &= ~FDI_RX_SYMBOL_LOCK;
2534         temp &= ~FDI_RX_BIT_LOCK;
2535         I915_WRITE(reg, temp);
2536
2537         POSTING_READ(reg);
2538         udelay(150);
2539
2540         /* enable CPU FDI TX and PCH FDI RX */
2541         reg = FDI_TX_CTL(pipe);
2542         temp = I915_READ(reg);
2543         temp &= ~(7 << 19);
2544         temp |= (intel_crtc->fdi_lanes - 1) << 19;
2545         temp &= ~FDI_LINK_TRAIN_NONE;
2546         temp |= FDI_LINK_TRAIN_PATTERN_1;
2547         temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2548         /* SNB-B */
2549         temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
2550         I915_WRITE(reg, temp | FDI_TX_ENABLE);
2551
2552         reg = FDI_RX_CTL(pipe);
2553         temp = I915_READ(reg);
2554         if (HAS_PCH_CPT(dev)) {
2555                 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2556                 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
2557         } else {
2558                 temp &= ~FDI_LINK_TRAIN_NONE;
2559                 temp |= FDI_LINK_TRAIN_PATTERN_1;
2560         }
2561         I915_WRITE(reg, temp | FDI_RX_ENABLE);
2562
2563         POSTING_READ(reg);
2564         udelay(150);
2565
2566         if (HAS_PCH_CPT(dev))
2567                 cpt_phase_pointer_enable(dev, pipe);
2568
2569         for (i = 0; i < 4; i++) {
2570                 reg = FDI_TX_CTL(pipe);
2571                 temp = I915_READ(reg);
2572                 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2573                 temp |= snb_b_fdi_train_param[i];
2574                 I915_WRITE(reg, temp);
2575
2576                 POSTING_READ(reg);
2577                 udelay(500);
2578
2579                 reg = FDI_RX_IIR(pipe);
2580                 temp = I915_READ(reg);
2581                 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2582
2583                 if (temp & FDI_RX_BIT_LOCK) {
2584                         I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
2585                         DRM_DEBUG_KMS("FDI train 1 done.\n");
2586                         break;
2587                 }
2588         }
2589         if (i == 4)
2590                 DRM_ERROR("FDI train 1 fail!\n");
2591
2592         /* Train 2 */
2593         reg = FDI_TX_CTL(pipe);
2594         temp = I915_READ(reg);
2595         temp &= ~FDI_LINK_TRAIN_NONE;
2596         temp |= FDI_LINK_TRAIN_PATTERN_2;
2597         if (IS_GEN6(dev)) {
2598                 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2599                 /* SNB-B */
2600                 temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
2601         }
2602         I915_WRITE(reg, temp);
2603
2604         reg = FDI_RX_CTL(pipe);
2605         temp = I915_READ(reg);
2606         if (HAS_PCH_CPT(dev)) {
2607                 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2608                 temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
2609         } else {
2610                 temp &= ~FDI_LINK_TRAIN_NONE;
2611                 temp |= FDI_LINK_TRAIN_PATTERN_2;
2612         }
2613         I915_WRITE(reg, temp);
2614
2615         POSTING_READ(reg);
2616         udelay(150);
2617
2618         for (i = 0; i < 4; i++) {
2619                 reg = FDI_TX_CTL(pipe);
2620                 temp = I915_READ(reg);
2621                 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2622                 temp |= snb_b_fdi_train_param[i];
2623                 I915_WRITE(reg, temp);
2624
2625                 POSTING_READ(reg);
2626                 udelay(500);
2627
2628                 reg = FDI_RX_IIR(pipe);
2629                 temp = I915_READ(reg);
2630                 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2631
2632                 if (temp & FDI_RX_SYMBOL_LOCK) {
2633                         I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
2634                         DRM_DEBUG_KMS("FDI train 2 done.\n");
2635                         break;
2636                 }
2637         }
2638         if (i == 4)
2639                 DRM_ERROR("FDI train 2 fail!\n");
2640
2641         DRM_DEBUG_KMS("FDI train done.\n");
2642 }
2643
2644 /* Manual link training for Ivy Bridge A0 parts */
2645 static void ivb_manual_fdi_link_train(struct drm_crtc *crtc)
2646 {
2647         struct drm_device *dev = crtc->dev;
2648         struct drm_i915_private *dev_priv = dev->dev_private;
2649         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2650         int pipe = intel_crtc->pipe;
2651         u32 reg, temp, i;
2652
2653         /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
2654            for train result */
2655         reg = FDI_RX_IMR(pipe);
2656         temp = I915_READ(reg);
2657         temp &= ~FDI_RX_SYMBOL_LOCK;
2658         temp &= ~FDI_RX_BIT_LOCK;
2659         I915_WRITE(reg, temp);
2660
2661         POSTING_READ(reg);
2662         udelay(150);
2663
2664         /* enable CPU FDI TX and PCH FDI RX */
2665         reg = FDI_TX_CTL(pipe);
2666         temp = I915_READ(reg);
2667         temp &= ~(7 << 19);
2668         temp |= (intel_crtc->fdi_lanes - 1) << 19;
2669         temp &= ~(FDI_LINK_TRAIN_AUTO | FDI_LINK_TRAIN_NONE_IVB);
2670         temp |= FDI_LINK_TRAIN_PATTERN_1_IVB;
2671         temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2672         temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
2673         temp |= FDI_COMPOSITE_SYNC;
2674         I915_WRITE(reg, temp | FDI_TX_ENABLE);
2675
2676         reg = FDI_RX_CTL(pipe);
2677         temp = I915_READ(reg);
2678         temp &= ~FDI_LINK_TRAIN_AUTO;
2679         temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2680         temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
2681         temp |= FDI_COMPOSITE_SYNC;
2682         I915_WRITE(reg, temp | FDI_RX_ENABLE);
2683
2684         POSTING_READ(reg);
2685         udelay(150);
2686
2687         if (HAS_PCH_CPT(dev))
2688                 cpt_phase_pointer_enable(dev, pipe);
2689
2690         for (i = 0; i < 4; i++) {
2691                 reg = FDI_TX_CTL(pipe);
2692                 temp = I915_READ(reg);
2693                 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2694                 temp |= snb_b_fdi_train_param[i];
2695                 I915_WRITE(reg, temp);
2696
2697                 POSTING_READ(reg);
2698                 udelay(500);
2699
2700                 reg = FDI_RX_IIR(pipe);
2701                 temp = I915_READ(reg);
2702                 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2703
2704                 if (temp & FDI_RX_BIT_LOCK ||
2705                     (I915_READ(reg) & FDI_RX_BIT_LOCK)) {
2706                         I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
2707                         DRM_DEBUG_KMS("FDI train 1 done.\n");
2708                         break;
2709                 }
2710         }
2711         if (i == 4)
2712                 DRM_ERROR("FDI train 1 fail!\n");
2713
2714         /* Train 2 */
2715         reg = FDI_TX_CTL(pipe);
2716         temp = I915_READ(reg);
2717         temp &= ~FDI_LINK_TRAIN_NONE_IVB;
2718         temp |= FDI_LINK_TRAIN_PATTERN_2_IVB;
2719         temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2720         temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
2721         I915_WRITE(reg, temp);
2722
2723         reg = FDI_RX_CTL(pipe);
2724         temp = I915_READ(reg);
2725         temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2726         temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
2727         I915_WRITE(reg, temp);
2728
2729         POSTING_READ(reg);
2730         udelay(150);
2731
2732         for (i = 0; i < 4; i++) {
2733                 reg = FDI_TX_CTL(pipe);
2734                 temp = I915_READ(reg);
2735                 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2736                 temp |= snb_b_fdi_train_param[i];
2737                 I915_WRITE(reg, temp);
2738
2739                 POSTING_READ(reg);
2740                 udelay(500);
2741
2742                 reg = FDI_RX_IIR(pipe);
2743                 temp = I915_READ(reg);
2744                 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2745
2746                 if (temp & FDI_RX_SYMBOL_LOCK) {
2747                         I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
2748                         DRM_DEBUG_KMS("FDI train 2 done.\n");
2749                         break;
2750                 }
2751         }
2752         if (i == 4)
2753                 DRM_ERROR("FDI train 2 fail!\n");
2754
2755         DRM_DEBUG_KMS("FDI train done.\n");
2756 }
2757
2758 static void ironlake_fdi_pll_enable(struct drm_crtc *crtc)
2759 {
2760         struct drm_device *dev = crtc->dev;
2761         struct drm_i915_private *dev_priv = dev->dev_private;
2762         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2763         int pipe = intel_crtc->pipe;
2764         u32 reg, temp;
2765
2766         /* Write the TU size bits so error detection works */
2767         I915_WRITE(FDI_RX_TUSIZE1(pipe),
2768                    I915_READ(PIPE_DATA_M1(pipe)) & TU_SIZE_MASK);
2769
2770         /* enable PCH FDI RX PLL, wait warmup plus DMI latency */
2771         reg = FDI_RX_CTL(pipe);
2772         temp = I915_READ(reg);
2773         temp &= ~((0x7 << 19) | (0x7 << 16));
2774         temp |= (intel_crtc->fdi_lanes - 1) << 19;
2775         temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11;
2776         I915_WRITE(reg, temp | FDI_RX_PLL_ENABLE);
2777
2778         POSTING_READ(reg);
2779         udelay(200);
2780
2781         /* Switch from Rawclk to PCDclk */
2782         temp = I915_READ(reg);
2783         I915_WRITE(reg, temp | FDI_PCDCLK);
2784
2785         POSTING_READ(reg);
2786         udelay(200);
2787
2788         /* Enable CPU FDI TX PLL, always on for Ironlake */
2789         reg = FDI_TX_CTL(pipe);
2790         temp = I915_READ(reg);
2791         if ((temp & FDI_TX_PLL_ENABLE) == 0) {
2792                 I915_WRITE(reg, temp | FDI_TX_PLL_ENABLE);
2793
2794                 POSTING_READ(reg);
2795                 udelay(100);
2796         }
2797 }
2798
2799 static void cpt_phase_pointer_disable(struct drm_device *dev, int pipe)
2800 {
2801         struct drm_i915_private *dev_priv = dev->dev_private;
2802         u32 flags = I915_READ(SOUTH_CHICKEN1);
2803
2804         flags &= ~(FDI_PHASE_SYNC_EN(pipe));
2805         I915_WRITE(SOUTH_CHICKEN1, flags); /* once to disable... */
2806         flags &= ~(FDI_PHASE_SYNC_OVR(pipe));
2807         I915_WRITE(SOUTH_CHICKEN1, flags); /* then again to lock */
2808         POSTING_READ(SOUTH_CHICKEN1);
2809 }
2810 static void ironlake_fdi_disable(struct drm_crtc *crtc)
2811 {
2812         struct drm_device *dev = crtc->dev;
2813         struct drm_i915_private *dev_priv = dev->dev_private;
2814         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2815         int pipe = intel_crtc->pipe;
2816         u32 reg, temp;
2817
2818         /* disable CPU FDI tx and PCH FDI rx */
2819         reg = FDI_TX_CTL(pipe);
2820         temp = I915_READ(reg);
2821         I915_WRITE(reg, temp & ~FDI_TX_ENABLE);
2822         POSTING_READ(reg);
2823
2824         reg = FDI_RX_CTL(pipe);
2825         temp = I915_READ(reg);
2826         temp &= ~(0x7 << 16);
2827         temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11;
2828         I915_WRITE(reg, temp & ~FDI_RX_ENABLE);
2829
2830         POSTING_READ(reg);
2831         udelay(100);
2832
2833         /* Ironlake workaround, disable clock pointer after downing FDI */
2834         if (HAS_PCH_IBX(dev)) {
2835                 I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
2836                 I915_WRITE(FDI_RX_CHICKEN(pipe),
2837                            I915_READ(FDI_RX_CHICKEN(pipe) &
2838                                      ~FDI_RX_PHASE_SYNC_POINTER_EN));
2839         } else if (HAS_PCH_CPT(dev)) {
2840                 cpt_phase_pointer_disable(dev, pipe);
2841         }
2842
2843         /* still set train pattern 1 */
2844         reg = FDI_TX_CTL(pipe);
2845         temp = I915_READ(reg);
2846         temp &= ~FDI_LINK_TRAIN_NONE;
2847         temp |= FDI_LINK_TRAIN_PATTERN_1;
2848         I915_WRITE(reg, temp);
2849
2850         reg = FDI_RX_CTL(pipe);
2851         temp = I915_READ(reg);
2852         if (HAS_PCH_CPT(dev)) {
2853                 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2854                 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
2855         } else {
2856                 temp &= ~FDI_LINK_TRAIN_NONE;
2857                 temp |= FDI_LINK_TRAIN_PATTERN_1;
2858         }
2859         /* BPC in FDI rx is consistent with that in PIPECONF */
2860         temp &= ~(0x07 << 16);
2861         temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11;
2862         I915_WRITE(reg, temp);
2863
2864         POSTING_READ(reg);
2865         udelay(100);
2866 }
2867
2868 /*
2869  * When we disable a pipe, we need to clear any pending scanline wait events
2870  * to avoid hanging the ring, which we assume we are waiting on.
2871  */
2872 static void intel_clear_scanline_wait(struct drm_device *dev)
2873 {
2874         struct drm_i915_private *dev_priv = dev->dev_private;
2875         struct intel_ring_buffer *ring;
2876         u32 tmp;
2877
2878         if (IS_GEN2(dev))
2879                 /* Can't break the hang on i8xx */
2880                 return;
2881
2882         ring = LP_RING(dev_priv);
2883         tmp = I915_READ_CTL(ring);
2884         if (tmp & RING_WAIT)
2885                 I915_WRITE_CTL(ring, tmp);
2886 }
2887
2888 static void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc)
2889 {
2890         struct drm_i915_gem_object *obj;
2891         struct drm_i915_private *dev_priv;
2892
2893         if (crtc->fb == NULL)
2894                 return;
2895
2896         obj = to_intel_framebuffer(crtc->fb)->obj;
2897         dev_priv = crtc->dev->dev_private;
2898         wait_event(dev_priv->pending_flip_queue,
2899                    atomic_read(&obj->pending_flip) == 0);
2900 }
2901
2902 static bool intel_crtc_driving_pch(struct drm_crtc *crtc)
2903 {
2904         struct drm_device *dev = crtc->dev;
2905         struct drm_mode_config *mode_config = &dev->mode_config;
2906         struct intel_encoder *encoder;
2907
2908         /*
2909          * If there's a non-PCH eDP on this crtc, it must be DP_A, and that
2910          * must be driven by its own crtc; no sharing is possible.
2911          */
2912         list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
2913                 if (encoder->base.crtc != crtc)
2914                         continue;
2915
2916                 switch (encoder->type) {
2917                 case INTEL_OUTPUT_EDP:
2918                         if (!intel_encoder_is_pch_edp(&encoder->base))
2919                                 return false;
2920                         continue;
2921                 }
2922         }
2923
2924         return true;
2925 }
2926
2927 /*
2928  * Enable PCH resources required for PCH ports:
2929  *   - PCH PLLs
2930  *   - FDI training & RX/TX
2931  *   - update transcoder timings
2932  *   - DP transcoding bits
2933  *   - transcoder
2934  */
2935 static void ironlake_pch_enable(struct drm_crtc *crtc)
2936 {
2937         struct drm_device *dev = crtc->dev;
2938         struct drm_i915_private *dev_priv = dev->dev_private;
2939         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2940         int pipe = intel_crtc->pipe;
2941         u32 reg, temp, transc_sel;
2942
2943         /* For PCH output, training FDI link */
2944         dev_priv->display.fdi_link_train(crtc);
2945
2946         intel_enable_pch_pll(dev_priv, pipe);
2947
2948         if (HAS_PCH_CPT(dev)) {
2949                 transc_sel = intel_crtc->use_pll_a ? TRANSC_DPLLA_SEL :
2950                         TRANSC_DPLLB_SEL;
2951
2952                 /* Be sure PCH DPLL SEL is set */
2953                 temp = I915_READ(PCH_DPLL_SEL);
2954                 if (pipe == 0) {
2955                         temp &= ~(TRANSA_DPLLB_SEL);
2956                         temp |= (TRANSA_DPLL_ENABLE | TRANSA_DPLLA_SEL);
2957                 } else if (pipe == 1) {
2958                         temp &= ~(TRANSB_DPLLB_SEL);
2959                         temp |= (TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL);
2960                 } else if (pipe == 2) {
2961                         temp &= ~(TRANSC_DPLLB_SEL);
2962                         temp |= (TRANSC_DPLL_ENABLE | transc_sel);
2963                 }
2964                 I915_WRITE(PCH_DPLL_SEL, temp);
2965         }
2966
2967         /* set transcoder timing, panel must allow it */
2968         assert_panel_unlocked(dev_priv, pipe);
2969         I915_WRITE(TRANS_HTOTAL(pipe), I915_READ(HTOTAL(pipe)));
2970         I915_WRITE(TRANS_HBLANK(pipe), I915_READ(HBLANK(pipe)));
2971         I915_WRITE(TRANS_HSYNC(pipe),  I915_READ(HSYNC(pipe)));
2972
2973         I915_WRITE(TRANS_VTOTAL(pipe), I915_READ(VTOTAL(pipe)));
2974         I915_WRITE(TRANS_VBLANK(pipe), I915_READ(VBLANK(pipe)));
2975         I915_WRITE(TRANS_VSYNC(pipe),  I915_READ(VSYNC(pipe)));
2976
2977         intel_fdi_normal_train(crtc);
2978
2979         /* For PCH DP, enable TRANS_DP_CTL */
2980         if (HAS_PCH_CPT(dev) &&
2981             (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
2982              intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) {
2983                 u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) >> 5;
2984                 reg = TRANS_DP_CTL(pipe);
2985                 temp = I915_READ(reg);
2986                 temp &= ~(TRANS_DP_PORT_SEL_MASK |
2987                           TRANS_DP_SYNC_MASK |
2988                           TRANS_DP_BPC_MASK);
2989                 temp |= (TRANS_DP_OUTPUT_ENABLE |
2990                          TRANS_DP_ENH_FRAMING);
2991                 temp |= bpc << 9; /* same format but at 11:9 */
2992
2993                 if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC)
2994                         temp |= TRANS_DP_HSYNC_ACTIVE_HIGH;
2995                 if (crtc->mode.flags & DRM_MODE_FLAG_PVSYNC)
2996                         temp |= TRANS_DP_VSYNC_ACTIVE_HIGH;
2997
2998                 switch (intel_trans_dp_port_sel(crtc)) {
2999                 case PCH_DP_B:
3000                         temp |= TRANS_DP_PORT_SEL_B;
3001                         break;
3002                 case PCH_DP_C:
3003                         temp |= TRANS_DP_PORT_SEL_C;
3004                         break;
3005                 case PCH_DP_D:
3006                         temp |= TRANS_DP_PORT_SEL_D;
3007                         break;
3008                 default:
3009                         DRM_DEBUG_KMS("Wrong PCH DP port return. Guess port B\n");
3010                         temp |= TRANS_DP_PORT_SEL_B;
3011                         break;
3012                 }
3013
3014                 I915_WRITE(reg, temp);
3015         }
3016
3017         intel_enable_transcoder(dev_priv, pipe);
3018 }
3019
3020 void intel_cpt_verify_modeset(struct drm_device *dev, int pipe)
3021 {
3022         struct drm_i915_private *dev_priv = dev->dev_private;
3023         int dslreg = PIPEDSL(pipe), tc2reg = TRANS_CHICKEN2(pipe);
3024         u32 temp;
3025
3026         temp = I915_READ(dslreg);
3027         udelay(500);
3028         if (wait_for(I915_READ(dslreg) != temp, 5)) {
3029                 /* Without this, mode sets may fail silently on FDI */
3030                 I915_WRITE(tc2reg, TRANS_AUTOTRAIN_GEN_STALL_DIS);
3031                 udelay(250);
3032                 I915_WRITE(tc2reg, 0);
3033                 if (wait_for(I915_READ(dslreg) != temp, 5))
3034                         DRM_ERROR("mode set failed: pipe %d stuck\n", pipe);
3035         }
3036 }
3037
3038 static void ironlake_crtc_enable(struct drm_crtc *crtc)
3039 {
3040         struct drm_device *dev = crtc->dev;
3041         struct drm_i915_private *dev_priv = dev->dev_private;
3042         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3043         int pipe = intel_crtc->pipe;
3044         int plane = intel_crtc->plane;
3045         u32 temp;
3046         bool is_pch_port;
3047
3048         if (intel_crtc->active)
3049                 return;
3050
3051         intel_crtc->active = true;
3052         intel_update_watermarks(dev);
3053
3054         if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
3055                 temp = I915_READ(PCH_LVDS);
3056                 if ((temp & LVDS_PORT_EN) == 0)
3057                         I915_WRITE(PCH_LVDS, temp | LVDS_PORT_EN);
3058         }
3059
3060         is_pch_port = intel_crtc_driving_pch(crtc);
3061
3062         if (is_pch_port)
3063                 ironlake_fdi_pll_enable(crtc);
3064         else
3065                 ironlake_fdi_disable(crtc);
3066
3067         /* Enable panel fitting for LVDS */
3068         if (dev_priv->pch_pf_size &&
3069             (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) || HAS_eDP)) {
3070                 /* Force use of hard-coded filter coefficients
3071                  * as some pre-programmed values are broken,
3072                  * e.g. x201.
3073                  */
3074                 I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3);
3075                 I915_WRITE(PF_WIN_POS(pipe), dev_priv->pch_pf_pos);
3076                 I915_WRITE(PF_WIN_SZ(pipe), dev_priv->pch_pf_size);
3077         }
3078
3079         /*
3080          * On ILK+ LUT must be loaded before the pipe is running but with
3081          * clocks enabled
3082          */
3083         intel_crtc_load_lut(crtc);
3084
3085         intel_enable_pipe(dev_priv, pipe, is_pch_port);
3086         intel_enable_plane(dev_priv, plane, pipe);
3087
3088         if (is_pch_port)
3089                 ironlake_pch_enable(crtc);
3090
3091         mutex_lock(&dev->struct_mutex);
3092         intel_update_fbc(dev);
3093         mutex_unlock(&dev->struct_mutex);
3094
3095         intel_crtc_update_cursor(crtc, true);
3096 }
3097
3098 static void ironlake_crtc_disable(struct drm_crtc *crtc)
3099 {
3100         struct drm_device *dev = crtc->dev;
3101         struct drm_i915_private *dev_priv = dev->dev_private;
3102         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3103         int pipe = intel_crtc->pipe;
3104         int plane = intel_crtc->plane;
3105         u32 reg, temp;
3106
3107         if (!intel_crtc->active)
3108                 return;
3109
3110         intel_crtc_wait_for_pending_flips(crtc);
3111         drm_vblank_off(dev, pipe);
3112         intel_crtc_update_cursor(crtc, false);
3113
3114         intel_disable_plane(dev_priv, plane, pipe);
3115
3116         if (dev_priv->cfb_plane == plane)
3117                 intel_disable_fbc(dev);
3118
3119         intel_disable_pipe(dev_priv, pipe);
3120
3121         /* Disable PF */
3122         I915_WRITE(PF_CTL(pipe), 0);
3123         I915_WRITE(PF_WIN_SZ(pipe), 0);
3124
3125         ironlake_fdi_disable(crtc);
3126
3127         /* This is a horrible layering violation; we should be doing this in
3128          * the connector/encoder ->prepare instead, but we don't always have
3129          * enough information there about the config to know whether it will
3130          * actually be necessary or just cause undesired flicker.
3131          */
3132         intel_disable_pch_ports(dev_priv, pipe);
3133
3134         intel_disable_transcoder(dev_priv, pipe);
3135
3136         if (HAS_PCH_CPT(dev)) {
3137                 /* disable TRANS_DP_CTL */
3138                 reg = TRANS_DP_CTL(pipe);
3139                 temp = I915_READ(reg);
3140                 temp &= ~(TRANS_DP_OUTPUT_ENABLE | TRANS_DP_PORT_SEL_MASK);
3141                 temp |= TRANS_DP_PORT_SEL_NONE;
3142                 I915_WRITE(reg, temp);
3143
3144                 /* disable DPLL_SEL */
3145                 temp = I915_READ(PCH_DPLL_SEL);
3146                 switch (pipe) {
3147                 case 0:
3148                         temp &= ~(TRANSA_DPLL_ENABLE | TRANSA_DPLLB_SEL);
3149                         break;
3150                 case 1:
3151                         temp &= ~(TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL);
3152                         break;
3153                 case 2:
3154                         /* C shares PLL A or B */
3155                         temp &= ~(TRANSC_DPLL_ENABLE | TRANSC_DPLLB_SEL);
3156                         break;
3157                 default:
3158                         BUG(); /* wtf */
3159                 }
3160                 I915_WRITE(PCH_DPLL_SEL, temp);
3161         }
3162
3163         /* disable PCH DPLL */
3164         if (!intel_crtc->no_pll)
3165                 intel_disable_pch_pll(dev_priv, pipe);
3166
3167         /* Switch from PCDclk to Rawclk */
3168         reg = FDI_RX_CTL(pipe);
3169         temp = I915_READ(reg);
3170         I915_WRITE(reg, temp & ~FDI_PCDCLK);
3171
3172         /* Disable CPU FDI TX PLL */
3173         reg = FDI_TX_CTL(pipe);
3174         temp = I915_READ(reg);
3175         I915_WRITE(reg, temp & ~FDI_TX_PLL_ENABLE);
3176
3177         POSTING_READ(reg);
3178         udelay(100);
3179
3180         reg = FDI_RX_CTL(pipe);
3181         temp = I915_READ(reg);
3182         I915_WRITE(reg, temp & ~FDI_RX_PLL_ENABLE);
3183
3184         /* Wait for the clocks to turn off. */
3185         POSTING_READ(reg);
3186         udelay(100);
3187
3188         intel_crtc->active = false;
3189         intel_update_watermarks(dev);
3190
3191         mutex_lock(&dev->struct_mutex);
3192         intel_update_fbc(dev);
3193         intel_clear_scanline_wait(dev);
3194         mutex_unlock(&dev->struct_mutex);
3195 }
3196
3197 static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
3198 {
3199         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3200         int pipe = intel_crtc->pipe;
3201         int plane = intel_crtc->plane;
3202
3203         /* XXX: When our outputs are all unaware of DPMS modes other than off
3204          * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
3205          */
3206         switch (mode) {
3207         case DRM_MODE_DPMS_ON:
3208         case DRM_MODE_DPMS_STANDBY:
3209         case DRM_MODE_DPMS_SUSPEND:
3210                 DRM_DEBUG_KMS("crtc %d/%d dpms on\n", pipe, plane);
3211                 ironlake_crtc_enable(crtc);
3212                 break;
3213
3214         case DRM_MODE_DPMS_OFF:
3215                 DRM_DEBUG_KMS("crtc %d/%d dpms off\n", pipe, plane);
3216                 ironlake_crtc_disable(crtc);
3217                 break;
3218         }
3219 }
3220
3221 static void intel_crtc_dpms_overlay(struct intel_crtc *intel_crtc, bool enable)
3222 {
3223         if (!enable && intel_crtc->overlay) {
3224                 struct drm_device *dev = intel_crtc->base.dev;
3225                 struct drm_i915_private *dev_priv = dev->dev_private;
3226
3227                 mutex_lock(&dev->struct_mutex);
3228                 dev_priv->mm.interruptible = false;
3229                 (void) intel_overlay_switch_off(intel_crtc->overlay);
3230                 dev_priv->mm.interruptible = true;
3231                 mutex_unlock(&dev->struct_mutex);
3232         }
3233
3234         /* Let userspace switch the overlay on again. In most cases userspace
3235          * has to recompute where to put it anyway.
3236          */
3237 }
3238
3239 static void i9xx_crtc_enable(struct drm_crtc *crtc)
3240 {
3241         struct drm_device *dev = crtc->dev;
3242         struct drm_i915_private *dev_priv = dev->dev_private;
3243         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3244         int pipe = intel_crtc->pipe;
3245         int plane = intel_crtc->plane;
3246
3247         if (intel_crtc->active)
3248                 return;
3249
3250         intel_crtc->active = true;
3251         intel_update_watermarks(dev);
3252
3253         intel_enable_pll(dev_priv, pipe);
3254         intel_enable_pipe(dev_priv, pipe, false);
3255         intel_enable_plane(dev_priv, plane, pipe);
3256
3257         intel_crtc_load_lut(crtc);
3258         intel_update_fbc(dev);
3259
3260         /* Give the overlay scaler a chance to enable if it's on this pipe */
3261         intel_crtc_dpms_overlay(intel_crtc, true);
3262         intel_crtc_update_cursor(crtc, true);
3263 }
3264
3265 static void i9xx_crtc_disable(struct drm_crtc *crtc)
3266 {
3267         struct drm_device *dev = crtc->dev;
3268         struct drm_i915_private *dev_priv = dev->dev_private;
3269         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3270         int pipe = intel_crtc->pipe;
3271         int plane = intel_crtc->plane;
3272
3273         if (!intel_crtc->active)
3274                 return;
3275
3276         /* Give the overlay scaler a chance to disable if it's on this pipe */
3277         intel_crtc_wait_for_pending_flips(crtc);
3278         drm_vblank_off(dev, pipe);
3279         intel_crtc_dpms_overlay(intel_crtc, false);
3280         intel_crtc_update_cursor(crtc, false);
3281
3282         if (dev_priv->cfb_plane == plane)
3283                 intel_disable_fbc(dev);
3284
3285         intel_disable_plane(dev_priv, plane, pipe);
3286         intel_disable_pipe(dev_priv, pipe);
3287         intel_disable_pll(dev_priv, pipe);
3288
3289         intel_crtc->active = false;
3290         intel_update_fbc(dev);
3291         intel_update_watermarks(dev);
3292         intel_clear_scanline_wait(dev);
3293 }
3294
3295 static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode)
3296 {
3297         /* XXX: When our outputs are all unaware of DPMS modes other than off
3298          * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
3299          */
3300         switch (mode) {
3301         case DRM_MODE_DPMS_ON:
3302         case DRM_MODE_DPMS_STANDBY:
3303         case DRM_MODE_DPMS_SUSPEND:
3304                 i9xx_crtc_enable(crtc);
3305                 break;
3306         case DRM_MODE_DPMS_OFF:
3307                 i9xx_crtc_disable(crtc);
3308                 break;
3309         }
3310 }
3311
3312 /**
3313  * Sets the power management mode of the pipe and plane.
3314  */
3315 static void intel_crtc_dpms(struct drm_crtc *crtc, int mode)
3316 {
3317         struct drm_device *dev = crtc->dev;
3318         struct drm_i915_private *dev_priv = dev->dev_private;
3319         struct drm_i915_master_private *master_priv;
3320         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3321         int pipe = intel_crtc->pipe;
3322         bool enabled;
3323
3324         if (intel_crtc->dpms_mode == mode)
3325                 return;
3326
3327         intel_crtc->dpms_mode = mode;
3328
3329         dev_priv->display.dpms(crtc, mode);
3330
3331         if (!dev->primary->master)
3332                 return;
3333
3334         master_priv = dev->primary->master->driver_priv;
3335         if (!master_priv->sarea_priv)
3336                 return;
3337
3338         enabled = crtc->enabled && mode != DRM_MODE_DPMS_OFF;
3339
3340         switch (pipe) {
3341         case 0:
3342                 master_priv->sarea_priv->pipeA_w = enabled ? crtc->mode.hdisplay : 0;
3343                 master_priv->sarea_priv->pipeA_h = enabled ? crtc->mode.vdisplay : 0;
3344                 break;
3345         case 1:
3346                 master_priv->sarea_priv->pipeB_w = enabled ? crtc->mode.hdisplay : 0;
3347                 master_priv->sarea_priv->pipeB_h = enabled ? crtc->mode.vdisplay : 0;
3348                 break;
3349         default:
3350                 DRM_ERROR("Can't update pipe %c in SAREA\n", pipe_name(pipe));
3351                 break;
3352         }
3353 }
3354
3355 static void intel_crtc_disable(struct drm_crtc *crtc)
3356 {
3357         struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
3358         struct drm_device *dev = crtc->dev;
3359
3360         crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
3361         assert_plane_disabled(dev->dev_private, to_intel_crtc(crtc)->plane);
3362         assert_pipe_disabled(dev->dev_private, to_intel_crtc(crtc)->pipe);
3363
3364         if (crtc->fb) {
3365                 mutex_lock(&dev->struct_mutex);
3366                 intel_unpin_fb_obj(to_intel_framebuffer(crtc->fb)->obj);
3367                 mutex_unlock(&dev->struct_mutex);
3368         }
3369 }
3370
3371 /* Prepare for a mode set.
3372  *
3373  * Note we could be a lot smarter here.  We need to figure out which outputs
3374  * will be enabled, which disabled (in short, how the config will changes)
3375  * and perform the minimum necessary steps to accomplish that, e.g. updating
3376  * watermarks, FBC configuration, making sure PLLs are programmed correctly,
3377  * panel fitting is in the proper state, etc.
3378  */
3379 static void i9xx_crtc_prepare(struct drm_crtc *crtc)
3380 {
3381         i9xx_crtc_disable(crtc);
3382 }
3383
3384 static void i9xx_crtc_commit(struct drm_crtc *crtc)
3385 {
3386         i9xx_crtc_enable(crtc);
3387 }
3388
3389 static void ironlake_crtc_prepare(struct drm_crtc *crtc)
3390 {
3391         ironlake_crtc_disable(crtc);
3392 }
3393
3394 static void ironlake_crtc_commit(struct drm_crtc *crtc)
3395 {
3396         ironlake_crtc_enable(crtc);
3397 }
3398
3399 void intel_encoder_prepare(struct drm_encoder *encoder)
3400 {
3401         struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
3402         /* lvds has its own version of prepare see intel_lvds_prepare */
3403         encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF);
3404 }
3405
3406 void intel_encoder_commit(struct drm_encoder *encoder)
3407 {
3408         struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
3409         struct drm_device *dev = encoder->dev;
3410         struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
3411         struct intel_crtc *intel_crtc = to_intel_crtc(intel_encoder->base.crtc);
3412
3413         /* lvds has its own version of commit see intel_lvds_commit */
3414         encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);
3415
3416         if (HAS_PCH_CPT(dev))
3417                 intel_cpt_verify_modeset(dev, intel_crtc->pipe);
3418 }
3419
3420 void intel_encoder_destroy(struct drm_encoder *encoder)
3421 {
3422         struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
3423
3424         drm_encoder_cleanup(encoder);
3425         kfree(intel_encoder);
3426 }
3427
3428 static bool intel_crtc_mode_fixup(struct drm_crtc *crtc,
3429                                   struct drm_display_mode *mode,
3430                                   struct drm_display_mode *adjusted_mode)
3431 {
3432         struct drm_device *dev = crtc->dev;
3433
3434         if (HAS_PCH_SPLIT(dev)) {
3435                 /* FDI link clock is fixed at 2.7G */
3436                 if (mode->clock * 3 > IRONLAKE_FDI_FREQ * 4)
3437                         return false;
3438         }
3439
3440         /* XXX some encoders set the crtcinfo, others don't.
3441          * Obviously we need some form of conflict resolution here...
3442          */
3443         if (adjusted_mode->crtc_htotal == 0)
3444                 drm_mode_set_crtcinfo(adjusted_mode, 0);
3445
3446         return true;
3447 }
3448
3449 static int i945_get_display_clock_speed(struct drm_device *dev)
3450 {
3451         return 400000;
3452 }
3453
3454 static int i915_get_display_clock_speed(struct drm_device *dev)
3455 {
3456         return 333000;
3457 }
3458
3459 static int i9xx_misc_get_display_clock_speed(struct drm_device *dev)
3460 {
3461         return 200000;
3462 }
3463
3464 static int i915gm_get_display_clock_speed(struct drm_device *dev)
3465 {
3466         u16 gcfgc = 0;
3467
3468         pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
3469
3470         if (gcfgc & GC_LOW_FREQUENCY_ENABLE)
3471                 return 133000;
3472         else {
3473                 switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
3474                 case GC_DISPLAY_CLOCK_333_MHZ:
3475                         return 333000;
3476                 default:
3477                 case GC_DISPLAY_CLOCK_190_200_MHZ:
3478                         return 190000;
3479                 }
3480         }
3481 }
3482
3483 static int i865_get_display_clock_speed(struct drm_device *dev)
3484 {
3485         return 266000;
3486 }
3487
3488 static int i855_get_display_clock_speed(struct drm_device *dev)
3489 {
3490         u16 hpllcc = 0;
3491         /* Assume that the hardware is in the high speed state.  This
3492          * should be the default.
3493          */
3494         switch (hpllcc & GC_CLOCK_CONTROL_MASK) {
3495         case GC_CLOCK_133_200:
3496         case GC_CLOCK_100_200:
3497                 return 200000;
3498         case GC_CLOCK_166_250:
3499                 return 250000;
3500         case GC_CLOCK_100_133:
3501                 return 133000;
3502         }
3503
3504         /* Shouldn't happen */
3505         return 0;
3506 }
3507
3508 static int i830_get_display_clock_speed(struct drm_device *dev)
3509 {
3510         return 133000;
3511 }
3512
3513 struct fdi_m_n {
3514         u32        tu;
3515         u32        gmch_m;
3516         u32        gmch_n;
3517         u32        link_m;
3518         u32        link_n;
3519 };
3520
3521 static void
3522 fdi_reduce_ratio(u32 *num, u32 *den)
3523 {
3524         while (*num > 0xffffff || *den > 0xffffff) {
3525                 *num >>= 1;
3526                 *den >>= 1;
3527         }
3528 }
3529
3530 static void
3531 ironlake_compute_m_n(int bits_per_pixel, int nlanes, int pixel_clock,
3532                      int link_clock, struct fdi_m_n *m_n)
3533 {
3534         m_n->tu = 64; /* default size */
3535
3536         /* BUG_ON(pixel_clock > INT_MAX / 36); */
3537         m_n->gmch_m = bits_per_pixel * pixel_clock;
3538         m_n->gmch_n = link_clock * nlanes * 8;
3539         fdi_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
3540
3541         m_n->link_m = pixel_clock;
3542         m_n->link_n = link_clock;
3543         fdi_reduce_ratio(&m_n->link_m, &m_n->link_n);
3544 }
3545
3546
3547 struct intel_watermark_params {
3548         unsigned long fifo_size;
3549         unsigned long max_wm;
3550         unsigned long default_wm;
3551         unsigned long guard_size;
3552         unsigned long cacheline_size;
3553 };
3554
3555 /* Pineview has different values for various configs */
3556 static const struct intel_watermark_params pineview_display_wm = {
3557         PINEVIEW_DISPLAY_FIFO,
3558         PINEVIEW_MAX_WM,
3559         PINEVIEW_DFT_WM,
3560         PINEVIEW_GUARD_WM,
3561         PINEVIEW_FIFO_LINE_SIZE
3562 };
3563 static const struct intel_watermark_params pineview_display_hplloff_wm = {
3564         PINEVIEW_DISPLAY_FIFO,
3565         PINEVIEW_MAX_WM,
3566         PINEVIEW_DFT_HPLLOFF_WM,
3567         PINEVIEW_GUARD_WM,
3568         PINEVIEW_FIFO_LINE_SIZE
3569 };
3570 static const struct intel_watermark_params pineview_cursor_wm = {
3571         PINEVIEW_CURSOR_FIFO,
3572         PINEVIEW_CURSOR_MAX_WM,
3573         PINEVIEW_CURSOR_DFT_WM,
3574         PINEVIEW_CURSOR_GUARD_WM,
3575         PINEVIEW_FIFO_LINE_SIZE,
3576 };
3577 static const struct intel_watermark_params pineview_cursor_hplloff_wm = {
3578         PINEVIEW_CURSOR_FIFO,
3579         PINEVIEW_CURSOR_MAX_WM,
3580         PINEVIEW_CURSOR_DFT_WM,
3581         PINEVIEW_CURSOR_GUARD_WM,
3582         PINEVIEW_FIFO_LINE_SIZE
3583 };
3584 static const struct intel_watermark_params g4x_wm_info = {
3585         G4X_FIFO_SIZE,
3586         G4X_MAX_WM,
3587         G4X_MAX_WM,
3588         2,
3589         G4X_FIFO_LINE_SIZE,
3590 };
3591 static const struct intel_watermark_params g4x_cursor_wm_info = {
3592         I965_CURSOR_FIFO,
3593         I965_CURSOR_MAX_WM,
3594         I965_CURSOR_DFT_WM,
3595         2,
3596         G4X_FIFO_LINE_SIZE,
3597 };
3598 static const struct intel_watermark_params i965_cursor_wm_info = {
3599         I965_CURSOR_FIFO,
3600         I965_CURSOR_MAX_WM,
3601         I965_CURSOR_DFT_WM,
3602         2,
3603         I915_FIFO_LINE_SIZE,
3604 };
3605 static const struct intel_watermark_params i945_wm_info = {
3606         I945_FIFO_SIZE,
3607         I915_MAX_WM,
3608         1,
3609         2,
3610         I915_FIFO_LINE_SIZE
3611 };
3612 static const struct intel_watermark_params i915_wm_info = {
3613         I915_FIFO_SIZE,
3614         I915_MAX_WM,
3615         1,
3616         2,
3617         I915_FIFO_LINE_SIZE
3618 };
3619 static const struct intel_watermark_params i855_wm_info = {
3620         I855GM_FIFO_SIZE,
3621         I915_MAX_WM,
3622         1,
3623         2,
3624         I830_FIFO_LINE_SIZE
3625 };
3626 static const struct intel_watermark_params i830_wm_info = {
3627         I830_FIFO_SIZE,
3628         I915_MAX_WM,
3629         1,
3630         2,
3631         I830_FIFO_LINE_SIZE
3632 };
3633
3634 static const struct intel_watermark_params ironlake_display_wm_info = {
3635         ILK_DISPLAY_FIFO,
3636         ILK_DISPLAY_MAXWM,
3637         ILK_DISPLAY_DFTWM,
3638         2,
3639         ILK_FIFO_LINE_SIZE
3640 };
3641 static const struct intel_watermark_params ironlake_cursor_wm_info = {
3642         ILK_CURSOR_FIFO,
3643         ILK_CURSOR_MAXWM,
3644         ILK_CURSOR_DFTWM,
3645         2,
3646         ILK_FIFO_LINE_SIZE
3647 };
3648 static const struct intel_watermark_params ironlake_display_srwm_info = {
3649         ILK_DISPLAY_SR_FIFO,
3650         ILK_DISPLAY_MAX_SRWM,
3651         ILK_DISPLAY_DFT_SRWM,
3652         2,
3653         ILK_FIFO_LINE_SIZE
3654 };
3655 static const struct intel_watermark_params ironlake_cursor_srwm_info = {
3656         ILK_CURSOR_SR_FIFO,
3657         ILK_CURSOR_MAX_SRWM,
3658         ILK_CURSOR_DFT_SRWM,
3659         2,
3660         ILK_FIFO_LINE_SIZE
3661 };
3662
3663 static const struct intel_watermark_params sandybridge_display_wm_info = {
3664         SNB_DISPLAY_FIFO,
3665         SNB_DISPLAY_MAXWM,
3666         SNB_DISPLAY_DFTWM,
3667         2,
3668         SNB_FIFO_LINE_SIZE
3669 };
3670 static const struct intel_watermark_params sandybridge_cursor_wm_info = {
3671         SNB_CURSOR_FIFO,
3672         SNB_CURSOR_MAXWM,
3673         SNB_CURSOR_DFTWM,
3674         2,
3675         SNB_FIFO_LINE_SIZE
3676 };
3677 static const struct intel_watermark_params sandybridge_display_srwm_info = {
3678         SNB_DISPLAY_SR_FIFO,
3679         SNB_DISPLAY_MAX_SRWM,
3680         SNB_DISPLAY_DFT_SRWM,
3681         2,
3682         SNB_FIFO_LINE_SIZE
3683 };
3684 static const struct intel_watermark_params sandybridge_cursor_srwm_info = {
3685         SNB_CURSOR_SR_FIFO,
3686         SNB_CURSOR_MAX_SRWM,
3687         SNB_CURSOR_DFT_SRWM,
3688         2,
3689         SNB_FIFO_LINE_SIZE
3690 };
3691
3692
3693 /**
3694  * intel_calculate_wm - calculate watermark level
3695  * @clock_in_khz: pixel clock
3696  * @wm: chip FIFO params
3697  * @pixel_size: display pixel size
3698  * @latency_ns: memory latency for the platform
3699  *
3700  * Calculate the watermark level (the level at which the display plane will
3701  * start fetching from memory again).  Each chip has a different display
3702  * FIFO size and allocation, so the caller needs to figure that out and pass
3703  * in the correct intel_watermark_params structure.
3704  *
3705  * As the pixel clock runs, the FIFO will be drained at a rate that depends
3706  * on the pixel size.  When it reaches the watermark level, it'll start
3707  * fetching FIFO line sized based chunks from memory until the FIFO fills
3708  * past the watermark point.  If the FIFO drains completely, a FIFO underrun
3709  * will occur, and a display engine hang could result.
3710  */
3711 static unsigned long intel_calculate_wm(unsigned long clock_in_khz,
3712                                         const struct intel_watermark_params *wm,
3713                                         int fifo_size,
3714                                         int pixel_size,
3715                                         unsigned long latency_ns)
3716 {
3717         long entries_required, wm_size;
3718
3719         /*
3720          * Note: we need to make sure we don't overflow for various clock &
3721          * latency values.
3722          * clocks go from a few thousand to several hundred thousand.
3723          * latency is usually a few thousand
3724          */
3725         entries_required = ((clock_in_khz / 1000) * pixel_size * latency_ns) /
3726                 1000;
3727         entries_required = DIV_ROUND_UP(entries_required, wm->cacheline_size);
3728
3729         DRM_DEBUG_KMS("FIFO entries required for mode: %ld\n", entries_required);
3730
3731         wm_size = fifo_size - (entries_required + wm->guard_size);
3732
3733         DRM_DEBUG_KMS("FIFO watermark level: %ld\n", wm_size);
3734
3735         /* Don't promote wm_size to unsigned... */
3736         if (wm_size > (long)wm->max_wm)
3737                 wm_size = wm->max_wm;
3738         if (wm_size <= 0)
3739                 wm_size = wm->default_wm;
3740         return wm_size;
3741 }
3742
3743 struct cxsr_latency {
3744         int is_desktop;
3745         int is_ddr3;
3746         unsigned long fsb_freq;
3747         unsigned long mem_freq;
3748         unsigned long display_sr;
3749         unsigned long display_hpll_disable;
3750         unsigned long cursor_sr;
3751         unsigned long cursor_hpll_disable;
3752 };
3753
3754 static const struct cxsr_latency cxsr_latency_table[] = {
3755         {1, 0, 800, 400, 3382, 33382, 3983, 33983},    /* DDR2-400 SC */
3756         {1, 0, 800, 667, 3354, 33354, 3807, 33807},    /* DDR2-667 SC */
3757         {1, 0, 800, 800, 3347, 33347, 3763, 33763},    /* DDR2-800 SC */
3758         {1, 1, 800, 667, 6420, 36420, 6873, 36873},    /* DDR3-667 SC */
3759         {1, 1, 800, 800, 5902, 35902, 6318, 36318},    /* DDR3-800 SC */
3760
3761         {1, 0, 667, 400, 3400, 33400, 4021, 34021},    /* DDR2-400 SC */
3762         {1, 0, 667, 667, 3372, 33372, 3845, 33845},    /* DDR2-667 SC */
3763         {1, 0, 667, 800, 3386, 33386, 3822, 33822},    /* DDR2-800 SC */
3764         {1, 1, 667, 667, 6438, 36438, 6911, 36911},    /* DDR3-667 SC */
3765         {1, 1, 667, 800, 5941, 35941, 6377, 36377},    /* DDR3-800 SC */
3766
3767         {1, 0, 400, 400, 3472, 33472, 4173, 34173},    /* DDR2-400 SC */
3768         {1, 0, 400, 667, 3443, 33443, 3996, 33996},    /* DDR2-667 SC */
3769         {1, 0, 400, 800, 3430, 33430, 3946, 33946},    /* DDR2-800 SC */
3770         {1, 1, 400, 667, 6509, 36509, 7062, 37062},    /* DDR3-667 SC */
3771         {1, 1, 400, 800, 5985, 35985, 6501, 36501},    /* DDR3-800 SC */
3772
3773         {0, 0, 800, 400, 3438, 33438, 4065, 34065},    /* DDR2-400 SC */
3774         {0, 0, 800, 667, 3410, 33410, 3889, 33889},    /* DDR2-667 SC */
3775         {0, 0, 800, 800, 3403, 33403, 3845, 33845},    /* DDR2-800 SC */
3776         {0, 1, 800, 667, 6476, 36476, 6955, 36955},    /* DDR3-667 SC */
3777         {0, 1, 800, 800, 5958, 35958, 6400, 36400},    /* DDR3-800 SC */
3778
3779         {0, 0, 667, 400, 3456, 33456, 4103, 34106},    /* DDR2-400 SC */
3780         {0, 0, 667, 667, 3428, 33428, 3927, 33927},    /* DDR2-667 SC */
3781         {0, 0, 667, 800, 3443, 33443, 3905, 33905},    /* DDR2-800 SC */
3782         {0, 1, 667, 667, 6494, 36494, 6993, 36993},    /* DDR3-667 SC */
3783         {0, 1, 667, 800, 5998, 35998, 6460, 36460},    /* DDR3-800 SC */
3784
3785         {0, 0, 400, 400, 3528, 33528, 4255, 34255},    /* DDR2-400 SC */
3786         {0, 0, 400, 667, 3500, 33500, 4079, 34079},    /* DDR2-667 SC */
3787         {0, 0, 400, 800, 3487, 33487, 4029, 34029},    /* DDR2-800 SC */
3788         {0, 1, 400, 667, 6566, 36566, 7145, 37145},    /* DDR3-667 SC */
3789         {0, 1, 400, 800, 6042, 36042, 6584, 36584},    /* DDR3-800 SC */
3790 };
3791
3792 static const struct cxsr_latency *intel_get_cxsr_latency(int is_desktop,
3793                                                          int is_ddr3,
3794                                                          int fsb,
3795                                                          int mem)
3796 {
3797         const struct cxsr_latency *latency;
3798         int i;
3799
3800         if (fsb == 0 || mem == 0)
3801                 return NULL;
3802
3803         for (i = 0; i < ARRAY_SIZE(cxsr_latency_table); i++) {
3804                 latency = &cxsr_latency_table[i];
3805                 if (is_desktop == latency->is_desktop &&
3806                     is_ddr3 == latency->is_ddr3 &&
3807                     fsb == latency->fsb_freq && mem == latency->mem_freq)
3808                         return latency;
3809         }
3810
3811         DRM_DEBUG_KMS("Unknown FSB/MEM found, disable CxSR\n");
3812
3813         return NULL;
3814 }
3815
3816 static void pineview_disable_cxsr(struct drm_device *dev)
3817 {
3818         struct drm_i915_private *dev_priv = dev->dev_private;
3819
3820         /* deactivate cxsr */
3821         I915_WRITE(DSPFW3, I915_READ(DSPFW3) & ~PINEVIEW_SELF_REFRESH_EN);
3822 }
3823
3824 /*
3825  * Latency for FIFO fetches is dependent on several factors:
3826  *   - memory configuration (speed, channels)
3827  *   - chipset
3828  *   - current MCH state
3829  * It can be fairly high in some situations, so here we assume a fairly
3830  * pessimal value.  It's a tradeoff between extra memory fetches (if we
3831  * set this value too high, the FIFO will fetch frequently to stay full)
3832  * and power consumption (set it too low to save power and we might see
3833  * FIFO underruns and display "flicker").
3834  *
3835  * A value of 5us seems to be a good balance; safe for very low end
3836  * platforms but not overly aggressive on lower latency configs.
3837  */
3838 static const int latency_ns = 5000;
3839
3840 static int i9xx_get_fifo_size(struct drm_device *dev, int plane)
3841 {
3842         struct drm_i915_private *dev_priv = dev->dev_private;
3843         uint32_t dsparb = I915_READ(DSPARB);
3844         int size;
3845
3846         size = dsparb & 0x7f;
3847         if (plane)
3848                 size = ((dsparb >> DSPARB_CSTART_SHIFT) & 0x7f) - size;
3849
3850         DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb,
3851                       plane ? "B" : "A", size);
3852
3853         return size;
3854 }
3855
3856 static int i85x_get_fifo_size(struct drm_device *dev, int plane)
3857 {
3858         struct drm_i915_private *dev_priv = dev->dev_private;
3859         uint32_t dsparb = I915_READ(DSPARB);
3860         int size;
3861
3862         size = dsparb & 0x1ff;
3863         if (plane)
3864                 size = ((dsparb >> DSPARB_BEND_SHIFT) & 0x1ff) - size;
3865         size >>= 1; /* Convert to cachelines */
3866
3867         DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb,
3868                       plane ? "B" : "A", size);
3869
3870         return size;
3871 }
3872
3873 static int i845_get_fifo_size(struct drm_device *dev, int plane)
3874 {
3875         struct drm_i915_private *dev_priv = dev->dev_private;
3876         uint32_t dsparb = I915_READ(DSPARB);
3877         int size;
3878
3879         size = dsparb & 0x7f;
3880         size >>= 2; /* Convert to cachelines */
3881
3882         DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb,
3883                       plane ? "B" : "A",
3884                       size);
3885
3886         return size;
3887 }
3888
3889 static int i830_get_fifo_size(struct drm_device *dev, int plane)
3890 {
3891         struct drm_i915_private *dev_priv = dev->dev_private;
3892         uint32_t dsparb = I915_READ(DSPARB);
3893         int size;
3894
3895         size = dsparb & 0x7f;
3896         size >>= 1; /* Convert to cachelines */
3897
3898         DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb,
3899                       plane ? "B" : "A", size);
3900
3901         return size;
3902 }
3903
3904 static struct drm_crtc *single_enabled_crtc(struct drm_device *dev)
3905 {
3906         struct drm_crtc *crtc, *enabled = NULL;
3907
3908         list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
3909                 if (crtc->enabled && crtc->fb) {
3910                         if (enabled)
3911                                 return NULL;
3912                         enabled = crtc;
3913                 }
3914         }
3915
3916         return enabled;
3917 }
3918
3919 static void pineview_update_wm(struct drm_device *dev)
3920 {
3921         struct drm_i915_private *dev_priv = dev->dev_private;
3922         struct drm_crtc *crtc;
3923         const struct cxsr_latency *latency;
3924         u32 reg;
3925         unsigned long wm;
3926
3927         latency = intel_get_cxsr_latency(IS_PINEVIEW_G(dev), dev_priv->is_ddr3,
3928                                          dev_priv->fsb_freq, dev_priv->mem_freq);
3929         if (!latency) {
3930                 DRM_DEBUG_KMS("Unknown FSB/MEM found, disable CxSR\n");
3931                 pineview_disable_cxsr(dev);
3932                 return;
3933         }
3934
3935         crtc = single_enabled_crtc(dev);
3936         if (crtc) {
3937                 int clock = crtc->mode.clock;
3938                 int pixel_size = crtc->fb->bits_per_pixel / 8;
3939
3940                 /* Display SR */
3941                 wm = intel_calculate_wm(clock, &pineview_display_wm,
3942                                         pineview_display_wm.fifo_size,
3943                                         pixel_size, latency->display_sr);
3944                 reg = I915_READ(DSPFW1);
3945                 reg &= ~DSPFW_SR_MASK;
3946                 reg |= wm << DSPFW_SR_SHIFT;
3947                 I915_WRITE(DSPFW1, reg);
3948                 DRM_DEBUG_KMS("DSPFW1 register is %x\n", reg);
3949
3950                 /* cursor SR */
3951                 wm = intel_calculate_wm(clock, &pineview_cursor_wm,
3952                                         pineview_display_wm.fifo_size,
3953                                         pixel_size, latency->cursor_sr);
3954                 reg = I915_READ(DSPFW3);
3955                 reg &= ~DSPFW_CURSOR_SR_MASK;
3956                 reg |= (wm & 0x3f) << DSPFW_CURSOR_SR_SHIFT;
3957                 I915_WRITE(DSPFW3, reg);
3958
3959                 /* Display HPLL off SR */
3960                 wm = intel_calculate_wm(clock, &pineview_display_hplloff_wm,
3961                                         pineview_display_hplloff_wm.fifo_size,
3962                                         pixel_size, latency->display_hpll_disable);
3963                 reg = I915_READ(DSPFW3);
3964                 reg &= ~DSPFW_HPLL_SR_MASK;
3965                 reg |= wm & DSPFW_HPLL_SR_MASK;
3966                 I915_WRITE(DSPFW3, reg);
3967
3968                 /* cursor HPLL off SR */
3969                 wm = intel_calculate_wm(clock, &pineview_cursor_hplloff_wm,
3970                                         pineview_display_hplloff_wm.fifo_size,
3971                                         pixel_size, latency->cursor_hpll_disable);
3972                 reg = I915_READ(DSPFW3);
3973                 reg &= ~DSPFW_HPLL_CURSOR_MASK;
3974                 reg |= (wm & 0x3f) << DSPFW_HPLL_CURSOR_SHIFT;
3975                 I915_WRITE(DSPFW3, reg);
3976                 DRM_DEBUG_KMS("DSPFW3 register is %x\n", reg);
3977
3978                 /* activate cxsr */
3979                 I915_WRITE(DSPFW3,
3980                            I915_READ(DSPFW3) | PINEVIEW_SELF_REFRESH_EN);
3981                 DRM_DEBUG_KMS("Self-refresh is enabled\n");
3982         } else {
3983                 pineview_disable_cxsr(dev);
3984                 DRM_DEBUG_KMS("Self-refresh is disabled\n");
3985         }
3986 }
3987
3988 static bool g4x_compute_wm0(struct drm_device *dev,
3989                             int plane,
3990                             const struct intel_watermark_params *display,
3991                             int display_latency_ns,
3992                             const struct intel_watermark_params *cursor,
3993                             int cursor_latency_ns,
3994                             int *plane_wm,
3995                             int *cursor_wm)
3996 {
3997         struct drm_crtc *crtc;
3998         int htotal, hdisplay, clock, pixel_size;
3999         int line_time_us, line_count;
4000         int entries, tlb_miss;
4001
4002         crtc = intel_get_crtc_for_plane(dev, plane);
4003         if (crtc->fb == NULL || !crtc->enabled) {
4004                 *cursor_wm = cursor->guard_size;
4005                 *plane_wm = display->guard_size;
4006                 return false;
4007         }
4008
4009         htotal = crtc->mode.htotal;
4010         hdisplay = crtc->mode.hdisplay;
4011         clock = crtc->mode.clock;
4012         pixel_size = crtc->fb->bits_per_pixel / 8;
4013
4014         /* Use the small buffer method to calculate plane watermark */
4015         entries = ((clock * pixel_size / 1000) * display_latency_ns) / 1000;
4016         tlb_miss = display->fifo_size*display->cacheline_size - hdisplay * 8;
4017         if (tlb_miss > 0)
4018                 entries += tlb_miss;
4019         entries = DIV_ROUND_UP(entries, display->cacheline_size);
4020         *plane_wm = entries + display->guard_size;
4021         if (*plane_wm > (int)display->max_wm)
4022                 *plane_wm = display->max_wm;
4023
4024         /* Use the large buffer method to calculate cursor watermark */
4025         line_time_us = ((htotal * 1000) / clock);
4026         line_count = (cursor_latency_ns / line_time_us + 1000) / 1000;
4027         entries = line_count * 64 * pixel_size;
4028         tlb_miss = cursor->fifo_size*cursor->cacheline_size - hdisplay * 8;
4029         if (tlb_miss > 0)
4030                 entries += tlb_miss;
4031         entries = DIV_ROUND_UP(entries, cursor->cacheline_size);
4032         *cursor_wm = entries + cursor->guard_size;
4033         if (*cursor_wm > (int)cursor->max_wm)
4034                 *cursor_wm = (int)cursor->max_wm;
4035
4036         return true;
4037 }
4038
4039 /*
4040  * Check the wm result.
4041  *
4042  * If any calculated watermark values is larger than the maximum value that
4043  * can be programmed into the associated watermark register, that watermark
4044  * must be disabled.
4045  */
4046 static bool g4x_check_srwm(struct drm_device *dev,
4047                            int display_wm, int cursor_wm,
4048                            const struct intel_watermark_params *display,
4049                            const struct intel_watermark_params *cursor)
4050 {
4051         DRM_DEBUG_KMS("SR watermark: display plane %d, cursor %d\n",
4052                       display_wm, cursor_wm);
4053
4054         if (display_wm > display->max_wm) {
4055                 DRM_DEBUG_KMS("display watermark is too large(%d/%ld), disabling\n",
4056                               display_wm, display->max_wm);
4057                 return false;
4058         }
4059
4060         if (cursor_wm > cursor->max_wm) {
4061                 DRM_DEBUG_KMS("cursor watermark is too large(%d/%ld), disabling\n",
4062                               cursor_wm, cursor->max_wm);
4063                 return false;
4064         }
4065
4066         if (!(display_wm || cursor_wm)) {
4067                 DRM_DEBUG_KMS("SR latency is 0, disabling\n");
4068                 return false;
4069         }
4070
4071         return true;
4072 }
4073
4074 static bool g4x_compute_srwm(struct drm_device *dev,
4075                              int plane,
4076                              int latency_ns,
4077                              const struct intel_watermark_params *display,
4078                              const struct intel_watermark_params *cursor,
4079                              int *display_wm, int *cursor_wm)
4080 {
4081         struct drm_crtc *crtc;
4082         int hdisplay, htotal, pixel_size, clock;
4083         unsigned long line_time_us;
4084         int line_count, line_size;
4085         int small, large;
4086         int entries;
4087
4088         if (!latency_ns) {
4089                 *display_wm = *cursor_wm = 0;
4090                 return false;
4091         }
4092
4093         crtc = intel_get_crtc_for_plane(dev, plane);
4094         hdisplay = crtc->mode.hdisplay;
4095         htotal = crtc->mode.htotal;
4096         clock = crtc->mode.clock;
4097         pixel_size = crtc->fb->bits_per_pixel / 8;
4098
4099         line_time_us = (htotal * 1000) / clock;
4100         line_count = (latency_ns / line_time_us + 1000) / 1000;
4101         line_size = hdisplay * pixel_size;
4102
4103         /* Use the minimum of the small and large buffer method for primary */
4104         small = ((clock * pixel_size / 1000) * latency_ns) / 1000;
4105         large = line_count * line_size;
4106
4107         entries = DIV_ROUND_UP(min(small, large), display->cacheline_size);
4108         *display_wm = entries + display->guard_size;
4109
4110         /* calculate the self-refresh watermark for display cursor */
4111         entries = line_count * pixel_size * 64;
4112         entries = DIV_ROUND_UP(entries, cursor->cacheline_size);
4113         *cursor_wm = entries + cursor->guard_size;
4114
4115         return g4x_check_srwm(dev,
4116                               *display_wm, *cursor_wm,
4117                               display, cursor);
4118 }
4119
4120 #define single_plane_enabled(mask) is_power_of_2(mask)
4121
4122 static void g4x_update_wm(struct drm_device *dev)
4123 {
4124         static const int sr_latency_ns = 12000;
4125         struct drm_i915_private *dev_priv = dev->dev_private;
4126         int planea_wm, planeb_wm, cursora_wm, cursorb_wm;
4127         int plane_sr, cursor_sr;
4128         unsigned int enabled = 0;
4129
4130         if (g4x_compute_wm0(dev, 0,
4131                             &g4x_wm_info, latency_ns,
4132                             &g4x_cursor_wm_info, latency_ns,
4133                             &planea_wm, &cursora_wm))
4134                 enabled |= 1;
4135
4136         if (g4x_compute_wm0(dev, 1,
4137                             &g4x_wm_info, latency_ns,
4138                             &g4x_cursor_wm_info, latency_ns,
4139                             &planeb_wm, &cursorb_wm))
4140                 enabled |= 2;
4141
4142         plane_sr = cursor_sr = 0;
4143         if (single_plane_enabled(enabled) &&
4144             g4x_compute_srwm(dev, ffs(enabled) - 1,
4145                              sr_latency_ns,
4146                              &g4x_wm_info,
4147                              &g4x_cursor_wm_info,
4148                              &plane_sr, &cursor_sr))
4149                 I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN);
4150         else
4151                 I915_WRITE(FW_BLC_SELF,
4152                            I915_READ(FW_BLC_SELF) & ~FW_BLC_SELF_EN);
4153
4154         DRM_DEBUG_KMS("Setting FIFO watermarks - A: plane=%d, cursor=%d, B: plane=%d, cursor=%d, SR: plane=%d, cursor=%d\n",
4155                       planea_wm, cursora_wm,
4156                       planeb_wm, cursorb_wm,
4157                       plane_sr, cursor_sr);
4158
4159         I915_WRITE(DSPFW1,
4160                    (plane_sr << DSPFW_SR_SHIFT) |
4161                    (cursorb_wm << DSPFW_CURSORB_SHIFT) |
4162                    (planeb_wm << DSPFW_PLANEB_SHIFT) |
4163                    planea_wm);
4164         I915_WRITE(DSPFW2,
4165                    (I915_READ(DSPFW2) & DSPFW_CURSORA_MASK) |
4166                    (cursora_wm << DSPFW_CURSORA_SHIFT));
4167         /* HPLL off in SR has some issues on G4x... disable it */
4168         I915_WRITE(DSPFW3,
4169                    (I915_READ(DSPFW3) & ~DSPFW_HPLL_SR_EN) |
4170                    (cursor_sr << DSPFW_CURSOR_SR_SHIFT));
4171 }
4172
4173 static void i965_update_wm(struct drm_device *dev)
4174 {
4175         struct drm_i915_private *dev_priv = dev->dev_private;
4176         struct drm_crtc *crtc;
4177         int srwm = 1;
4178         int cursor_sr = 16;
4179
4180         /* Calc sr entries for one plane configs */
4181         crtc = single_enabled_crtc(dev);
4182         if (crtc) {
4183                 /* self-refresh has much higher latency */
4184                 static const int sr_latency_ns = 12000;
4185                 int clock = crtc->mode.clock;
4186                 int htotal = crtc->mode.htotal;
4187                 int hdisplay = crtc->mode.hdisplay;
4188                 int pixel_size = crtc->fb->bits_per_pixel / 8;
4189                 unsigned long line_time_us;
4190                 int entries;
4191
4192                 line_time_us = ((htotal * 1000) / clock);
4193
4194                 /* Use ns/us then divide to preserve precision */
4195                 entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) *
4196                         pixel_size * hdisplay;
4197                 entries = DIV_ROUND_UP(entries, I915_FIFO_LINE_SIZE);
4198                 srwm = I965_FIFO_SIZE - entries;
4199                 if (srwm < 0)
4200                         srwm = 1;
4201                 srwm &= 0x1ff;
4202                 DRM_DEBUG_KMS("self-refresh entries: %d, wm: %d\n",
4203                               entries, srwm);
4204
4205                 entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) *
4206                         pixel_size * 64;
4207                 entries = DIV_ROUND_UP(entries,
4208                                           i965_cursor_wm_info.cacheline_size);
4209                 cursor_sr = i965_cursor_wm_info.fifo_size -
4210                         (entries + i965_cursor_wm_info.guard_size);
4211
4212                 if (cursor_sr > i965_cursor_wm_info.max_wm)
4213                         cursor_sr = i965_cursor_wm_info.max_wm;
4214
4215                 DRM_DEBUG_KMS("self-refresh watermark: display plane %d "
4216                               "cursor %d\n", srwm, cursor_sr);
4217
4218                 if (IS_CRESTLINE(dev))
4219                         I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN);
4220         } else {
4221                 /* Turn off self refresh if both pipes are enabled */
4222                 if (IS_CRESTLINE(dev))
4223                         I915_WRITE(FW_BLC_SELF, I915_READ(FW_BLC_SELF)
4224                                    & ~FW_BLC_SELF_EN);
4225         }
4226
4227         DRM_DEBUG_KMS("Setting FIFO watermarks - A: 8, B: 8, C: 8, SR %d\n",
4228                       srwm);
4229
4230         /* 965 has limitations... */
4231         I915_WRITE(DSPFW1, (srwm << DSPFW_SR_SHIFT) |
4232                    (8 << 16) | (8 << 8) | (8 << 0));
4233         I915_WRITE(DSPFW2, (8 << 8) | (8 << 0));
4234         /* update cursor SR watermark */
4235         I915_WRITE(DSPFW3, (cursor_sr << DSPFW_CURSOR_SR_SHIFT));
4236 }
4237
4238 static void i9xx_update_wm(struct drm_device *dev)
4239 {
4240         struct drm_i915_private *dev_priv = dev->dev_private;
4241         const struct intel_watermark_params *wm_info;
4242         uint32_t fwater_lo;
4243         uint32_t fwater_hi;
4244         int cwm, srwm = 1;
4245         int fifo_size;
4246         int planea_wm, planeb_wm;
4247         struct drm_crtc *crtc, *enabled = NULL;
4248
4249         if (IS_I945GM(dev))
4250                 wm_info = &i945_wm_info;
4251         else if (!IS_GEN2(dev))
4252                 wm_info = &i915_wm_info;
4253         else
4254                 wm_info = &i855_wm_info;
4255
4256         fifo_size = dev_priv->display.get_fifo_size(dev, 0);
4257         crtc = intel_get_crtc_for_plane(dev, 0);
4258         if (crtc->enabled && crtc->fb) {
4259                 planea_wm = intel_calculate_wm(crtc->mode.clock,
4260                                                wm_info, fifo_size,
4261                                                crtc->fb->bits_per_pixel / 8,
4262                                                latency_ns);
4263                 enabled = crtc;
4264         } else
4265                 planea_wm = fifo_size - wm_info->guard_size;
4266
4267         fifo_size = dev_priv->display.get_fifo_size(dev, 1);
4268         crtc = intel_get_crtc_for_plane(dev, 1);
4269         if (crtc->enabled && crtc->fb) {
4270                 planeb_wm = intel_calculate_wm(crtc->mode.clock,
4271                                                wm_info, fifo_size,
4272                                                crtc->fb->bits_per_pixel / 8,
4273                                                latency_ns);
4274                 if (enabled == NULL)
4275                         enabled = crtc;
4276                 else
4277                         enabled = NULL;
4278         } else
4279                 planeb_wm = fifo_size - wm_info->guard_size;
4280
4281         DRM_DEBUG_KMS("FIFO watermarks - A: %d, B: %d\n", planea_wm, planeb_wm);
4282
4283         /*
4284          * Overlay gets an aggressive default since video jitter is bad.
4285          */
4286         cwm = 2;
4287
4288         /* Play safe and disable self-refresh before adjusting watermarks. */
4289         if (IS_I945G(dev) || IS_I945GM(dev))
4290                 I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN_MASK | 0);
4291         else if (IS_I915GM(dev))
4292                 I915_WRITE(INSTPM, I915_READ(INSTPM) & ~INSTPM_SELF_EN);
4293
4294         /* Calc sr entries for one plane configs */
4295         if (HAS_FW_BLC(dev) && enabled) {
4296                 /* self-refresh has much higher latency */
4297                 static const int sr_latency_ns = 6000;
4298                 int clock = enabled->mode.clock;
4299                 int htotal = enabled->mode.htotal;
4300                 int hdisplay = enabled->mode.hdisplay;
4301                 int pixel_size = enabled->fb->bits_per_pixel / 8;
4302                 unsigned long line_time_us;
4303                 int entries;
4304
4305                 line_time_us = (htotal * 1000) / clock;
4306
4307                 /* Use ns/us then divide to preserve precision */
4308                 entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) *
4309                         pixel_size * hdisplay;
4310                 entries = DIV_ROUND_UP(entries, wm_info->cacheline_size);
4311                 DRM_DEBUG_KMS("self-refresh entries: %d\n", entries);
4312                 srwm = wm_info->fifo_size - entries;
4313                 if (srwm < 0)
4314                         srwm = 1;
4315
4316                 if (IS_I945G(dev) || IS_I945GM(dev))
4317                         I915_WRITE(FW_BLC_SELF,
4318                                    FW_BLC_SELF_FIFO_MASK | (srwm & 0xff));
4319                 else if (IS_I915GM(dev))
4320                         I915_WRITE(FW_BLC_SELF, srwm & 0x3f);
4321         }
4322
4323         DRM_DEBUG_KMS("Setting FIFO watermarks - A: %d, B: %d, C: %d, SR %d\n",
4324                       planea_wm, planeb_wm, cwm, srwm);
4325
4326         fwater_lo = ((planeb_wm & 0x3f) << 16) | (planea_wm & 0x3f);
4327         fwater_hi = (cwm & 0x1f);
4328
4329         /* Set request length to 8 cachelines per fetch */
4330         fwater_lo = fwater_lo | (1 << 24) | (1 << 8);
4331         fwater_hi = fwater_hi | (1 << 8);
4332
4333         I915_WRITE(FW_BLC, fwater_lo);
4334         I915_WRITE(FW_BLC2, fwater_hi);
4335
4336         if (HAS_FW_BLC(dev)) {
4337                 if (enabled) {
4338                         if (IS_I945G(dev) || IS_I945GM(dev))
4339                                 I915_WRITE(FW_BLC_SELF,
4340                                            FW_BLC_SELF_EN_MASK | FW_BLC_SELF_EN);
4341                         else if (IS_I915GM(dev))
4342                                 I915_WRITE(INSTPM, I915_READ(INSTPM) | INSTPM_SELF_EN);
4343                         DRM_DEBUG_KMS("memory self refresh enabled\n");
4344                 } else
4345                         DRM_DEBUG_KMS("memory self refresh disabled\n");
4346         }
4347 }
4348
4349 static void i830_update_wm(struct drm_device *dev)
4350 {
4351         struct drm_i915_private *dev_priv = dev->dev_private;
4352         struct drm_crtc *crtc;
4353         uint32_t fwater_lo;
4354         int planea_wm;
4355
4356         crtc = single_enabled_crtc(dev);
4357         if (crtc == NULL)
4358                 return;
4359
4360         planea_wm = intel_calculate_wm(crtc->mode.clock, &i830_wm_info,
4361                                        dev_priv->display.get_fifo_size(dev, 0),
4362                                        crtc->fb->bits_per_pixel / 8,
4363                                        latency_ns);
4364         fwater_lo = I915_READ(FW_BLC) & ~0xfff;
4365         fwater_lo |= (3<<8) | planea_wm;
4366
4367         DRM_DEBUG_KMS("Setting FIFO watermarks - A: %d\n", planea_wm);
4368
4369         I915_WRITE(FW_BLC, fwater_lo);
4370 }
4371
4372 #define ILK_LP0_PLANE_LATENCY           700
4373 #define ILK_LP0_CURSOR_LATENCY          1300
4374
4375 /*
4376  * Check the wm result.
4377  *
4378  * If any calculated watermark values is larger than the maximum value that
4379  * can be programmed into the associated watermark register, that watermark
4380  * must be disabled.
4381  */
4382 static bool ironlake_check_srwm(struct drm_device *dev, int level,
4383                                 int fbc_wm, int display_wm, int cursor_wm,
4384                                 const struct intel_watermark_params *display,
4385                                 const struct intel_watermark_params *cursor)
4386 {
4387         struct drm_i915_private *dev_priv = dev->dev_private;
4388
4389         DRM_DEBUG_KMS("watermark %d: display plane %d, fbc lines %d,"
4390                       " cursor %d\n", level, display_wm, fbc_wm, cursor_wm);
4391
4392         if (fbc_wm > SNB_FBC_MAX_SRWM) {
4393                 DRM_DEBUG_KMS("fbc watermark(%d) is too large(%d), disabling wm%d+\n",
4394                               fbc_wm, SNB_FBC_MAX_SRWM, level);
4395
4396                 /* fbc has it's own way to disable FBC WM */
4397                 I915_WRITE(DISP_ARB_CTL,
4398                            I915_READ(DISP_ARB_CTL) | DISP_FBC_WM_DIS);
4399                 return false;
4400         }
4401
4402         if (display_wm > display->max_wm) {
4403                 DRM_DEBUG_KMS("display watermark(%d) is too large(%d), disabling wm%d+\n",
4404                               display_wm, SNB_DISPLAY_MAX_SRWM, level);
4405                 return false;
4406         }
4407
4408         if (cursor_wm > cursor->max_wm) {
4409                 DRM_DEBUG_KMS("cursor watermark(%d) is too large(%d), disabling wm%d+\n",
4410                               cursor_wm, SNB_CURSOR_MAX_SRWM, level);
4411                 return false;
4412         }
4413
4414         if (!(fbc_wm || display_wm || cursor_wm)) {
4415                 DRM_DEBUG_KMS("latency %d is 0, disabling wm%d+\n", level, level);
4416                 return false;
4417         }
4418
4419         return true;
4420 }
4421
4422 /*
4423  * Compute watermark values of WM[1-3],
4424  */
4425 static bool ironlake_compute_srwm(struct drm_device *dev, int level, int plane,
4426                                   int latency_ns,
4427                                   const struct intel_watermark_params *display,
4428                                   const struct intel_watermark_params *cursor,
4429                                   int *fbc_wm, int *display_wm, int *cursor_wm)
4430 {
4431         struct drm_crtc *crtc;
4432         unsigned long line_time_us;
4433         int hdisplay, htotal, pixel_size, clock;
4434         int line_count, line_size;
4435         int small, large;
4436         int entries;
4437
4438         if (!latency_ns) {
4439                 *fbc_wm = *display_wm = *cursor_wm = 0;
4440                 return false;
4441         }
4442
4443         crtc = intel_get_crtc_for_plane(dev, plane);
4444         hdisplay = crtc->mode.hdisplay;
4445         htotal = crtc->mode.htotal;
4446         clock = crtc->mode.clock;
4447         pixel_size = crtc->fb->bits_per_pixel / 8;
4448
4449         line_time_us = (htotal * 1000) / clock;
4450         line_count = (latency_ns / line_time_us + 1000) / 1000;
4451         line_size = hdisplay * pixel_size;
4452
4453         /* Use the minimum of the small and large buffer method for primary */
4454         small = ((clock * pixel_size / 1000) * latency_ns) / 1000;
4455         large = line_count * line_size;
4456
4457         entries = DIV_ROUND_UP(min(small, large), display->cacheline_size);
4458         *display_wm = entries + display->guard_size;
4459
4460         /*
4461          * Spec says:
4462          * FBC WM = ((Final Primary WM * 64) / number of bytes per line) + 2
4463          */
4464         *fbc_wm = DIV_ROUND_UP(*display_wm * 64, line_size) + 2;
4465
4466         /* calculate the self-refresh watermark for display cursor */
4467         entries = line_count * pixel_size * 64;
4468         entries = DIV_ROUND_UP(entries, cursor->cacheline_size);
4469         *cursor_wm = entries + cursor->guard_size;
4470
4471         return ironlake_check_srwm(dev, level,
4472                                    *fbc_wm, *display_wm, *cursor_wm,
4473                                    display, cursor);
4474 }
4475
4476 static void ironlake_update_wm(struct drm_device *dev)
4477 {
4478         struct drm_i915_private *dev_priv = dev->dev_private;
4479         int fbc_wm, plane_wm, cursor_wm;
4480         unsigned int enabled;
4481
4482         enabled = 0;
4483         if (g4x_compute_wm0(dev, 0,
4484                             &ironlake_display_wm_info,
4485                             ILK_LP0_PLANE_LATENCY,
4486                             &ironlake_cursor_wm_info,
4487                             ILK_LP0_CURSOR_LATENCY,
4488                             &plane_wm, &cursor_wm)) {
4489                 I915_WRITE(WM0_PIPEA_ILK,
4490                            (plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm);
4491                 DRM_DEBUG_KMS("FIFO watermarks For pipe A -"
4492                               " plane %d, " "cursor: %d\n",
4493                               plane_wm, cursor_wm);
4494                 enabled |= 1;
4495         }
4496
4497         if (g4x_compute_wm0(dev, 1,
4498                             &ironlake_display_wm_info,
4499                             ILK_LP0_PLANE_LATENCY,
4500                             &ironlake_cursor_wm_info,
4501                             ILK_LP0_CURSOR_LATENCY,
4502                             &plane_wm, &cursor_wm)) {
4503                 I915_WRITE(WM0_PIPEB_ILK,
4504                            (plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm);
4505                 DRM_DEBUG_KMS("FIFO watermarks For pipe B -"
4506                               " plane %d, cursor: %d\n",
4507                               plane_wm, cursor_wm);
4508                 enabled |= 2;
4509         }
4510
4511         /*
4512          * Calculate and update the self-refresh watermark only when one
4513          * display plane is used.
4514          */
4515         I915_WRITE(WM3_LP_ILK, 0);
4516         I915_WRITE(WM2_LP_ILK, 0);
4517         I915_WRITE(WM1_LP_ILK, 0);
4518
4519         if (!single_plane_enabled(enabled))
4520                 return;
4521         enabled = ffs(enabled) - 1;
4522
4523         /* WM1 */
4524         if (!ironlake_compute_srwm(dev, 1, enabled,
4525                                    ILK_READ_WM1_LATENCY() * 500,
4526                                    &ironlake_display_srwm_info,
4527                                    &ironlake_cursor_srwm_info,
4528                                    &fbc_wm, &plane_wm, &cursor_wm))
4529                 return;
4530
4531         I915_WRITE(WM1_LP_ILK,
4532                    WM1_LP_SR_EN |
4533                    (ILK_READ_WM1_LATENCY() << WM1_LP_LATENCY_SHIFT) |
4534                    (fbc_wm << WM1_LP_FBC_SHIFT) |
4535                    (plane_wm << WM1_LP_SR_SHIFT) |
4536                    cursor_wm);
4537
4538         /* WM2 */
4539         if (!ironlake_compute_srwm(dev, 2, enabled,
4540                                    ILK_READ_WM2_LATENCY() * 500,
4541                                    &ironlake_display_srwm_info,
4542                                    &ironlake_cursor_srwm_info,
4543                                    &fbc_wm, &plane_wm, &cursor_wm))
4544                 return;
4545
4546         I915_WRITE(WM2_LP_ILK,
4547                    WM2_LP_EN |
4548                    (ILK_READ_WM2_LATENCY() << WM1_LP_LATENCY_SHIFT) |
4549                    (fbc_wm << WM1_LP_FBC_SHIFT) |
4550                    (plane_wm << WM1_LP_SR_SHIFT) |
4551                    cursor_wm);
4552
4553         /*
4554          * WM3 is unsupported on ILK, probably because we don't have latency
4555          * data for that power state
4556          */
4557 }
4558
4559 void sandybridge_update_wm(struct drm_device *dev)
4560 {
4561         struct drm_i915_private *dev_priv = dev->dev_private;
4562         int latency = SNB_READ_WM0_LATENCY() * 100;     /* In unit 0.1us */
4563         u32 val;
4564         int fbc_wm, plane_wm, cursor_wm;
4565         unsigned int enabled;
4566
4567         enabled = 0;
4568         if (g4x_compute_wm0(dev, 0,
4569                             &sandybridge_display_wm_info, latency,
4570                             &sandybridge_cursor_wm_info, latency,
4571                             &plane_wm, &cursor_wm)) {
4572                 val = I915_READ(WM0_PIPEA_ILK);
4573                 val &= ~(WM0_PIPE_PLANE_MASK | WM0_PIPE_CURSOR_MASK);
4574                 I915_WRITE(WM0_PIPEA_ILK, val |
4575                            ((plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm));
4576                 DRM_DEBUG_KMS("FIFO watermarks For pipe A -"
4577                               " plane %d, " "cursor: %d\n",
4578                               plane_wm, cursor_wm);
4579                 enabled |= 1;
4580         }
4581
4582         if (g4x_compute_wm0(dev, 1,
4583                             &sandybridge_display_wm_info, latency,
4584                             &sandybridge_cursor_wm_info, latency,
4585                             &plane_wm, &cursor_wm)) {
4586                 val = I915_READ(WM0_PIPEB_ILK);
4587                 val &= ~(WM0_PIPE_PLANE_MASK | WM0_PIPE_CURSOR_MASK);
4588                 I915_WRITE(WM0_PIPEB_ILK, val |
4589                            ((plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm));
4590                 DRM_DEBUG_KMS("FIFO watermarks For pipe B -"
4591                               " plane %d, cursor: %d\n",
4592                               plane_wm, cursor_wm);
4593                 enabled |= 2;
4594         }
4595
4596         /* IVB has 3 pipes */
4597         if (IS_IVYBRIDGE(dev) &&
4598             g4x_compute_wm0(dev, 2,
4599                             &sandybridge_display_wm_info, latency,
4600                             &sandybridge_cursor_wm_info, latency,
4601                             &plane_wm, &cursor_wm)) {
4602                 val = I915_READ(WM0_PIPEC_IVB);
4603                 val &= ~(WM0_PIPE_PLANE_MASK | WM0_PIPE_CURSOR_MASK);
4604                 I915_WRITE(WM0_PIPEC_IVB, val |
4605                            ((plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm));
4606                 DRM_DEBUG_KMS("FIFO watermarks For pipe C -"
4607                               " plane %d, cursor: %d\n",
4608                               plane_wm, cursor_wm);
4609                 enabled |= 3;
4610         }
4611
4612         /*
4613          * Calculate and update the self-refresh watermark only when one
4614          * display plane is used.
4615          *
4616          * SNB support 3 levels of watermark.
4617          *
4618          * WM1/WM2/WM2 watermarks have to be enabled in the ascending order,
4619          * and disabled in the descending order
4620          *
4621          */
4622         I915_WRITE(WM3_LP_ILK, 0);
4623         I915_WRITE(WM2_LP_ILK, 0);
4624         I915_WRITE(WM1_LP_ILK, 0);
4625
4626         if (!single_plane_enabled(enabled) ||
4627             dev_priv->sprite_scaling_enabled)
4628                 return;
4629         enabled = ffs(enabled) - 1;
4630
4631         /* WM1 */
4632         if (!ironlake_compute_srwm(dev, 1, enabled,
4633                                    SNB_READ_WM1_LATENCY() * 500,
4634                                    &sandybridge_display_srwm_info,
4635                                    &sandybridge_cursor_srwm_info,
4636                                    &fbc_wm, &plane_wm, &cursor_wm))
4637                 return;
4638
4639         I915_WRITE(WM1_LP_ILK,
4640                    WM1_LP_SR_EN |
4641                    (SNB_READ_WM1_LATENCY() << WM1_LP_LATENCY_SHIFT) |
4642                    (fbc_wm << WM1_LP_FBC_SHIFT) |
4643                    (plane_wm << WM1_LP_SR_SHIFT) |
4644                    cursor_wm);
4645
4646         /* WM2 */
4647         if (!ironlake_compute_srwm(dev, 2, enabled,
4648                                    SNB_READ_WM2_LATENCY() * 500,
4649                                    &sandybridge_display_srwm_info,
4650                                    &sandybridge_cursor_srwm_info,
4651                                    &fbc_wm, &plane_wm, &cursor_wm))
4652                 return;
4653
4654         I915_WRITE(WM2_LP_ILK,
4655                    WM2_LP_EN |
4656                    (SNB_READ_WM2_LATENCY() << WM1_LP_LATENCY_SHIFT) |
4657                    (fbc_wm << WM1_LP_FBC_SHIFT) |
4658                    (plane_wm << WM1_LP_SR_SHIFT) |
4659                    cursor_wm);
4660
4661         /* WM3 */
4662         if (!ironlake_compute_srwm(dev, 3, enabled,
4663                                    SNB_READ_WM3_LATENCY() * 500,
4664                                    &sandybridge_display_srwm_info,
4665                                    &sandybridge_cursor_srwm_info,
4666                                    &fbc_wm, &plane_wm, &cursor_wm))
4667                 return;
4668
4669         I915_WRITE(WM3_LP_ILK,
4670                    WM3_LP_EN |
4671                    (SNB_READ_WM3_LATENCY() << WM1_LP_LATENCY_SHIFT) |
4672                    (fbc_wm << WM1_LP_FBC_SHIFT) |
4673                    (plane_wm << WM1_LP_SR_SHIFT) |
4674                    cursor_wm);
4675 }
4676
4677 static bool
4678 sandybridge_compute_sprite_wm(struct drm_device *dev, int plane,
4679                               uint32_t sprite_width, int pixel_size,
4680                               const struct intel_watermark_params *display,
4681                               int display_latency_ns, int *sprite_wm)
4682 {
4683         struct drm_crtc *crtc;
4684         int clock;
4685         int entries, tlb_miss;
4686
4687         crtc = intel_get_crtc_for_plane(dev, plane);
4688         if (crtc->fb == NULL || !crtc->enabled) {
4689                 *sprite_wm = display->guard_size;
4690                 return false;
4691         }
4692
4693         clock = crtc->mode.clock;
4694
4695         /* Use the small buffer method to calculate the sprite watermark */
4696         entries = ((clock * pixel_size / 1000) * display_latency_ns) / 1000;
4697         tlb_miss = display->fifo_size*display->cacheline_size -
4698                 sprite_width * 8;
4699         if (tlb_miss > 0)
4700                 entries += tlb_miss;
4701         entries = DIV_ROUND_UP(entries, display->cacheline_size);
4702         *sprite_wm = entries + display->guard_size;
4703         if (*sprite_wm > (int)display->max_wm)
4704                 *sprite_wm = display->max_wm;
4705
4706         return true;
4707 }
4708
4709 static bool
4710 sandybridge_compute_sprite_srwm(struct drm_device *dev, int plane,
4711                                 uint32_t sprite_width, int pixel_size,
4712                                 const struct intel_watermark_params *display,
4713                                 int latency_ns, int *sprite_wm)
4714 {
4715         struct drm_crtc *crtc;
4716         unsigned long line_time_us;
4717         int clock;
4718         int line_count, line_size;
4719         int small, large;
4720         int entries;
4721
4722         if (!latency_ns) {
4723                 *sprite_wm = 0;
4724                 return false;
4725         }
4726
4727         crtc = intel_get_crtc_for_plane(dev, plane);
4728         clock = crtc->mode.clock;
4729
4730         line_time_us = (sprite_width * 1000) / clock;
4731         line_count = (latency_ns / line_time_us + 1000) / 1000;
4732         line_size = sprite_width * pixel_size;
4733
4734         /* Use the minimum of the small and large buffer method for primary */
4735         small = ((clock * pixel_size / 1000) * latency_ns) / 1000;
4736         large = line_count * line_size;
4737
4738         entries = DIV_ROUND_UP(min(small, large), display->cacheline_size);
4739         *sprite_wm = entries + display->guard_size;
4740
4741         return *sprite_wm > 0x3ff ? false : true;
4742 }
4743
4744 static void sandybridge_update_sprite_wm(struct drm_device *dev, int pipe,
4745                                          uint32_t sprite_width, int pixel_size)
4746 {
4747         struct drm_i915_private *dev_priv = dev->dev_private;
4748         int latency = SNB_READ_WM0_LATENCY() * 100;     /* In unit 0.1us */
4749         u32 val;
4750         int sprite_wm, reg;
4751         int ret;
4752
4753         switch (pipe) {
4754         case 0:
4755                 reg = WM0_PIPEA_ILK;
4756                 break;
4757         case 1:
4758                 reg = WM0_PIPEB_ILK;
4759                 break;
4760         case 2:
4761                 reg = WM0_PIPEC_IVB;
4762                 break;
4763         default:
4764                 return; /* bad pipe */
4765         }
4766
4767         ret = sandybridge_compute_sprite_wm(dev, pipe, sprite_width, pixel_size,
4768                                             &sandybridge_display_wm_info,
4769                                             latency, &sprite_wm);
4770         if (!ret) {
4771                 DRM_DEBUG_KMS("failed to compute sprite wm for pipe %d\n",
4772                               pipe);
4773                 return;
4774         }
4775
4776         val = I915_READ(reg);
4777         val &= ~WM0_PIPE_SPRITE_MASK;
4778         I915_WRITE(reg, val | (sprite_wm << WM0_PIPE_SPRITE_SHIFT));
4779         DRM_DEBUG_KMS("sprite watermarks For pipe %d - %d\n", pipe, sprite_wm);
4780
4781
4782         ret = sandybridge_compute_sprite_srwm(dev, pipe, sprite_width,
4783                                               pixel_size,
4784                                               &sandybridge_display_srwm_info,
4785                                               SNB_READ_WM1_LATENCY() * 500,
4786                                               &sprite_wm);
4787         if (!ret) {
4788                 DRM_DEBUG_KMS("failed to compute sprite lp1 wm on pipe %d\n",
4789                               pipe);
4790                 return;
4791         }
4792         I915_WRITE(WM1S_LP_ILK, sprite_wm);
4793
4794         /* Only IVB has two more LP watermarks for sprite */
4795         if (!IS_IVYBRIDGE(dev))
4796                 return;
4797
4798         ret = sandybridge_compute_sprite_srwm(dev, pipe, sprite_width,
4799                                               pixel_size,
4800                                               &sandybridge_display_srwm_info,
4801                                               SNB_READ_WM2_LATENCY() * 500,
4802                                               &sprite_wm);
4803         if (!ret) {
4804                 DRM_DEBUG_KMS("failed to compute sprite lp2 wm on pipe %d\n",
4805                               pipe);
4806                 return;
4807         }
4808         I915_WRITE(WM2S_LP_IVB, sprite_wm);
4809
4810         ret = sandybridge_compute_sprite_srwm(dev, pipe, sprite_width,
4811                                               pixel_size,
4812                                               &sandybridge_display_srwm_info,
4813                                               SNB_READ_WM3_LATENCY() * 500,
4814                                               &sprite_wm);
4815         if (!ret) {
4816                 DRM_DEBUG_KMS("failed to compute sprite lp3 wm on pipe %d\n",
4817                               pipe);
4818                 return;
4819         }
4820         I915_WRITE(WM3S_LP_IVB, sprite_wm);
4821 }
4822
4823 /**
4824  * intel_update_watermarks - update FIFO watermark values based on current modes
4825  *
4826  * Calculate watermark values for the various WM regs based on current mode
4827  * and plane configuration.
4828  *
4829  * There are several cases to deal with here:
4830  *   - normal (i.e. non-self-refresh)
4831  *   - self-refresh (SR) mode
4832  *   - lines are large relative to FIFO size (buffer can hold up to 2)
4833  *   - lines are small relative to FIFO size (buffer can hold more than 2
4834  *     lines), so need to account for TLB latency
4835  *
4836  *   The normal calculation is:
4837  *     watermark = dotclock * bytes per pixel * latency
4838  *   where latency is platform & configuration dependent (we assume pessimal
4839  *   values here).
4840  *
4841  *   The SR calculation is:
4842  *     watermark = (trunc(latency/line time)+1) * surface width *
4843  *       bytes per pixel
4844  *   where
4845  *     line time = htotal / dotclock
4846  *     surface width = hdisplay for normal plane and 64 for cursor
4847  *   and latency is assumed to be high, as above.
4848  *
4849  * The final value programmed to the register should always be rounded up,
4850  * and include an extra 2 entries to account for clock crossings.
4851  *
4852  * We don't use the sprite, so we can ignore that.  And on Crestline we have
4853  * to set the non-SR watermarks to 8.
4854  */
4855 static void intel_update_watermarks(struct drm_device *dev)
4856 {
4857         struct drm_i915_private *dev_priv = dev->dev_private;
4858
4859         if (dev_priv->display.update_wm)
4860                 dev_priv->display.update_wm(dev);
4861 }
4862
4863 void intel_update_sprite_watermarks(struct drm_device *dev, int pipe,
4864                                     uint32_t sprite_width, int pixel_size)
4865 {
4866         struct drm_i915_private *dev_priv = dev->dev_private;
4867
4868         if (dev_priv->display.update_sprite_wm)
4869                 dev_priv->display.update_sprite_wm(dev, pipe, sprite_width,
4870                                                    pixel_size);
4871 }
4872
4873 static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
4874 {
4875         if (i915_panel_use_ssc >= 0)
4876                 return i915_panel_use_ssc != 0;
4877         return dev_priv->lvds_use_ssc
4878                 && !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE);
4879 }
4880
4881 /**
4882  * intel_choose_pipe_bpp_dither - figure out what color depth the pipe should send
4883  * @crtc: CRTC structure
4884  * @mode: requested mode
4885  *
4886  * A pipe may be connected to one or more outputs.  Based on the depth of the
4887  * attached framebuffer, choose a good color depth to use on the pipe.
4888  *
4889  * If possible, match the pipe depth to the fb depth.  In some cases, this
4890  * isn't ideal, because the connected output supports a lesser or restricted
4891  * set of depths.  Resolve that here:
4892  *    LVDS typically supports only 6bpc, so clamp down in that case
4893  *    HDMI supports only 8bpc or 12bpc, so clamp to 8bpc with dither for 10bpc
4894  *    Displays may support a restricted set as well, check EDID and clamp as
4895  *      appropriate.
4896  *    DP may want to dither down to 6bpc to fit larger modes
4897  *
4898  * RETURNS:
4899  * Dithering requirement (i.e. false if display bpc and pipe bpc match,
4900  * true if they don't match).
4901  */
4902 static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc,
4903                                          unsigned int *pipe_bpp,
4904                                          struct drm_display_mode *mode)
4905 {
4906         struct drm_device *dev = crtc->dev;
4907         struct drm_i915_private *dev_priv = dev->dev_private;
4908         struct drm_encoder *encoder;
4909         struct drm_connector *connector;
4910         unsigned int display_bpc = UINT_MAX, bpc;
4911
4912         /* Walk the encoders & connectors on this crtc, get min bpc */
4913         list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
4914                 struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
4915
4916                 if (encoder->crtc != crtc)
4917                         continue;
4918
4919                 if (intel_encoder->type == INTEL_OUTPUT_LVDS) {
4920                         unsigned int lvds_bpc;
4921
4922                         if ((I915_READ(PCH_LVDS) & LVDS_A3_POWER_MASK) ==
4923                             LVDS_A3_POWER_UP)
4924                                 lvds_bpc = 8;
4925                         else
4926                                 lvds_bpc = 6;
4927
4928                         if (lvds_bpc < display_bpc) {
4929                                 DRM_DEBUG_KMS("clamping display bpc (was %d) to LVDS (%d)\n", display_bpc, lvds_bpc);
4930                                 display_bpc = lvds_bpc;
4931                         }
4932                         continue;
4933                 }
4934
4935                 if (intel_encoder->type == INTEL_OUTPUT_EDP) {
4936                         /* Use VBT settings if we have an eDP panel */
4937                         unsigned int edp_bpc = dev_priv->edp.bpp / 3;
4938
4939                         if (edp_bpc < display_bpc) {
4940                                 DRM_DEBUG_KMS("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc);
4941                                 display_bpc = edp_bpc;
4942                         }
4943                         continue;
4944                 }
4945
4946                 /* Not one of the known troublemakers, check the EDID */
4947                 list_for_each_entry(connector, &dev->mode_config.connector_list,
4948                                     head) {
4949                         if (connector->encoder != encoder)
4950                                 continue;
4951
4952                         /* Don't use an invalid EDID bpc value */
4953                         if (connector->display_info.bpc &&
4954                             connector->display_info.bpc < display_bpc) {
4955                                 DRM_DEBUG_KMS("clamping display bpc (was %d) to EDID reported max of %d\n", display_bpc, connector->display_info.bpc);
4956                                 display_bpc = connector->display_info.bpc;
4957                         }
4958                 }
4959
4960                 /*
4961                  * HDMI is either 12 or 8, so if the display lets 10bpc sneak
4962                  * through, clamp it down.  (Note: >12bpc will be caught below.)
4963                  */
4964                 if (intel_encoder->type == INTEL_OUTPUT_HDMI) {
4965                         if (display_bpc > 8 && display_bpc < 12) {
4966                                 DRM_DEBUG_KMS("forcing bpc to 12 for HDMI\n");
4967                                 display_bpc = 12;
4968                         } else {
4969                                 DRM_DEBUG_KMS("forcing bpc to 8 for HDMI\n");
4970                                 display_bpc = 8;
4971                         }
4972                 }
4973         }
4974
4975         if (mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) {
4976                 DRM_DEBUG_KMS("Dithering DP to 6bpc\n");
4977                 display_bpc = 6;
4978         }
4979
4980         /*
4981          * We could just drive the pipe at the highest bpc all the time and
4982          * enable dithering as needed, but that costs bandwidth.  So choose
4983          * the minimum value that expresses the full color range of the fb but
4984          * also stays within the max display bpc discovered above.
4985          */
4986
4987         switch (crtc->fb->depth) {
4988         case 8:
4989                 bpc = 8; /* since we go through a colormap */
4990                 break;
4991         case 15:
4992         case 16:
4993                 bpc = 6; /* min is 18bpp */
4994                 break;
4995         case 24:
4996                 bpc = 8;
4997                 break;
4998         case 30:
4999                 bpc = 10;
5000                 break;
5001         case 48:
5002                 bpc = 12;
5003                 break;
5004         default:
5005                 DRM_DEBUG("unsupported depth, assuming 24 bits\n");
5006                 bpc = min((unsigned int)8, display_bpc);
5007                 break;
5008         }
5009
5010         display_bpc = min(display_bpc, bpc);
5011
5012         DRM_DEBUG_KMS("setting pipe bpc to %d (max display bpc %d)\n",
5013                       bpc, display_bpc);
5014
5015         *pipe_bpp = display_bpc * 3;
5016
5017         return display_bpc != bpc;
5018 }
5019
5020 static int i9xx_get_refclk(struct drm_crtc *crtc, int num_connectors)
5021 {
5022         struct drm_device *dev = crtc->dev;
5023         struct drm_i915_private *dev_priv = dev->dev_private;
5024         int refclk;
5025
5026         if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
5027             intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
5028                 refclk = dev_priv->lvds_ssc_freq * 1000;
5029                 DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n",
5030                               refclk / 1000);
5031         } else if (!IS_GEN2(dev)) {
5032                 refclk = 96000;
5033         } else {
5034                 refclk = 48000;
5035         }
5036
5037         return refclk;
5038 }
5039
5040 static void i9xx_adjust_sdvo_tv_clock(struct drm_display_mode *adjusted_mode,
5041                                       intel_clock_t *clock)
5042 {
5043         /* SDVO TV has fixed PLL values depend on its clock range,
5044            this mirrors vbios setting. */
5045         if (adjusted_mode->clock >= 100000
5046             && adjusted_mode->clock < 140500) {
5047                 clock->p1 = 2;
5048                 clock->p2 = 10;
5049                 clock->n = 3;
5050                 clock->m1 = 16;
5051                 clock->m2 = 8;
5052         } else if (adjusted_mode->clock >= 140500
5053                    && adjusted_mode->clock <= 200000) {
5054                 clock->p1 = 1;
5055                 clock->p2 = 10;
5056                 clock->n = 6;
5057                 clock->m1 = 12;
5058                 clock->m2 = 8;
5059         }
5060 }
5061
5062 static void i9xx_update_pll_dividers(struct drm_crtc *crtc,
5063                                      intel_clock_t *clock,
5064                                      intel_clock_t *reduced_clock)
5065 {
5066         struct drm_device *dev = crtc->dev;
5067         struct drm_i915_private *dev_priv = dev->dev_private;
5068         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5069         int pipe = intel_crtc->pipe;
5070         u32 fp, fp2 = 0;
5071
5072         if (IS_PINEVIEW(dev)) {
5073                 fp = (1 << clock->n) << 16 | clock->m1 << 8 | clock->m2;
5074                 if (reduced_clock)
5075                         fp2 = (1 << reduced_clock->n) << 16 |
5076                                 reduced_clock->m1 << 8 | reduced_clock->m2;
5077         } else {
5078                 fp = clock->n << 16 | clock->m1 << 8 | clock->m2;
5079                 if (reduced_clock)
5080                         fp2 = reduced_clock->n << 16 | reduced_clock->m1 << 8 |
5081                                 reduced_clock->m2;
5082         }
5083
5084         I915_WRITE(FP0(pipe), fp);
5085
5086         intel_crtc->lowfreq_avail = false;
5087         if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
5088             reduced_clock && i915_powersave) {
5089                 I915_WRITE(FP1(pipe), fp2);
5090                 intel_crtc->lowfreq_avail = true;
5091         } else {
5092                 I915_WRITE(FP1(pipe), fp);
5093         }
5094 }
5095
5096 static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
5097                               struct drm_display_mode *mode,
5098                               struct drm_display_mode *adjusted_mode,
5099                               int x, int y,
5100                               struct drm_framebuffer *old_fb)
5101 {
5102         struct drm_device *dev = crtc->dev;
5103         struct drm_i915_private *dev_priv = dev->dev_private;
5104         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5105         int pipe = intel_crtc->pipe;
5106         int plane = intel_crtc->plane;
5107         int refclk, num_connectors = 0;
5108         intel_clock_t clock, reduced_clock;
5109         u32 dpll, dspcntr, pipeconf;
5110         bool ok, has_reduced_clock = false, is_sdvo = false, is_dvo = false;
5111         bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false;
5112         struct drm_mode_config *mode_config = &dev->mode_config;
5113         struct intel_encoder *encoder;
5114         const intel_limit_t *limit;
5115         int ret;
5116         u32 temp;
5117         u32 lvds_sync = 0;
5118
5119         list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
5120                 if (encoder->base.crtc != crtc)
5121                         continue;
5122
5123                 switch (encoder->type) {
5124                 case INTEL_OUTPUT_LVDS:
5125                         is_lvds = true;
5126                         break;
5127                 case INTEL_OUTPUT_SDVO:
5128                 case INTEL_OUTPUT_HDMI:
5129                         is_sdvo = true;
5130                         if (encoder->needs_tv_clock)
5131                                 is_tv = true;
5132                         break;
5133                 case INTEL_OUTPUT_DVO:
5134                         is_dvo = true;
5135                         break;
5136                 case INTEL_OUTPUT_TVOUT:
5137                         is_tv = true;
5138                         break;
5139                 case INTEL_OUTPUT_ANALOG:
5140                         is_crt = true;
5141                         break;
5142                 case INTEL_OUTPUT_DISPLAYPORT:
5143                         is_dp = true;
5144                         break;
5145                 }
5146
5147                 num_connectors++;
5148         }
5149
5150         refclk = i9xx_get_refclk(crtc, num_connectors);
5151
5152         /*
5153          * Returns a set of divisors for the desired target clock with the given
5154          * refclk, or FALSE.  The returned values represent the clock equation:
5155          * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
5156          */
5157         limit = intel_limit(crtc, refclk);
5158         ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, NULL,
5159                              &clock);
5160         if (!ok) {
5161                 DRM_ERROR("Couldn't find PLL settings for mode!\n");
5162                 return -EINVAL;
5163         }
5164
5165         /* Ensure that the cursor is valid for the new mode before changing... */
5166         intel_crtc_update_cursor(crtc, true);
5167
5168         if (is_lvds && dev_priv->lvds_downclock_avail) {
5169                 /*
5170                  * Ensure we match the reduced clock's P to the target clock.
5171                  * If the clocks don't match, we can't switch the display clock
5172                  * by using the FP0/FP1. In such case we will disable the LVDS
5173                  * downclock feature.
5174                 */
5175                 has_reduced_clock = limit->find_pll(limit, crtc,
5176                                                     dev_priv->lvds_downclock,
5177                                                     refclk,
5178                                                     &clock,
5179                                                     &reduced_clock);
5180         }
5181
5182         if (is_sdvo && is_tv)
5183                 i9xx_adjust_sdvo_tv_clock(adjusted_mode, &clock);
5184
5185         i9xx_update_pll_dividers(crtc, &clock, has_reduced_clock ?
5186                                  &reduced_clock : NULL);
5187
5188         dpll = DPLL_VGA_MODE_DIS;
5189
5190         if (!IS_GEN2(dev)) {
5191                 if (is_lvds)
5192                         dpll |= DPLLB_MODE_LVDS;
5193                 else
5194                         dpll |= DPLLB_MODE_DAC_SERIAL;
5195                 if (is_sdvo) {
5196                         int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
5197                         if (pixel_multiplier > 1) {
5198                                 if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
5199                                         dpll |= (pixel_multiplier - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
5200                         }
5201                         dpll |= DPLL_DVO_HIGH_SPEED;
5202                 }
5203                 if (is_dp)
5204                         dpll |= DPLL_DVO_HIGH_SPEED;
5205
5206                 /* compute bitmask from p1 value */
5207                 if (IS_PINEVIEW(dev))
5208                         dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW;
5209                 else {
5210                         dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
5211                         if (IS_G4X(dev) && has_reduced_clock)
5212                                 dpll |= (1 << (reduced_clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
5213                 }
5214                 switch (clock.p2) {
5215                 case 5:
5216                         dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
5217                         break;
5218                 case 7:
5219                         dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
5220                         break;
5221                 case 10:
5222                         dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
5223                         break;
5224                 case 14:
5225                         dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
5226                         break;
5227                 }
5228                 if (INTEL_INFO(dev)->gen >= 4)
5229                         dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
5230         } else {
5231                 if (is_lvds) {
5232                         dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
5233                 } else {
5234                         if (clock.p1 == 2)
5235                                 dpll |= PLL_P1_DIVIDE_BY_TWO;
5236                         else
5237                                 dpll |= (clock.p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT;
5238                         if (clock.p2 == 4)
5239                                 dpll |= PLL_P2_DIVIDE_BY_4;
5240                 }
5241         }
5242
5243         if (is_sdvo && is_tv)
5244                 dpll |= PLL_REF_INPUT_TVCLKINBC;
5245         else if (is_tv)
5246                 /* XXX: just matching BIOS for now */
5247                 /*      dpll |= PLL_REF_INPUT_TVCLKINBC; */
5248                 dpll |= 3;
5249         else if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2)
5250                 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
5251         else
5252                 dpll |= PLL_REF_INPUT_DREFCLK;
5253
5254         /* setup pipeconf */
5255         pipeconf = I915_READ(PIPECONF(pipe));
5256
5257         /* Set up the display plane register */
5258         dspcntr = DISPPLANE_GAMMA_ENABLE;
5259
5260         if (pipe == 0)
5261                 dspcntr &= ~DISPPLANE_SEL_PIPE_MASK;
5262         else
5263                 dspcntr |= DISPPLANE_SEL_PIPE_B;
5264
5265         if (pipe == 0 && INTEL_INFO(dev)->gen < 4) {
5266                 /* Enable pixel doubling when the dot clock is > 90% of the (display)
5267                  * core speed.
5268                  *
5269                  * XXX: No double-wide on 915GM pipe B. Is that the only reason for the
5270                  * pipe == 0 check?
5271                  */
5272                 if (mode->clock >
5273                     dev_priv->display.get_display_clock_speed(dev) * 9 / 10)
5274                         pipeconf |= PIPECONF_DOUBLE_WIDE;
5275                 else
5276                         pipeconf &= ~PIPECONF_DOUBLE_WIDE;
5277         }
5278
5279         /* default to 8bpc */
5280         pipeconf &= ~(PIPECONF_BPP_MASK | PIPECONF_DITHER_EN);
5281         if (is_dp) {
5282                 if (mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) {
5283                         pipeconf |= PIPECONF_BPP_6 |
5284                                     PIPECONF_DITHER_EN |
5285                                     PIPECONF_DITHER_TYPE_SP;
5286                 }
5287         }
5288
5289         dpll |= DPLL_VCO_ENABLE;
5290
5291         DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
5292         drm_mode_debug_printmodeline(mode);
5293
5294         I915_WRITE(DPLL(pipe), dpll & ~DPLL_VCO_ENABLE);
5295
5296         POSTING_READ(DPLL(pipe));
5297         udelay(150);
5298
5299         /* The LVDS pin pair needs to be on before the DPLLs are enabled.
5300          * This is an exception to the general rule that mode_set doesn't turn
5301          * things on.
5302          */
5303         if (is_lvds) {
5304                 temp = I915_READ(LVDS);
5305                 temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
5306                 if (pipe == 1) {
5307                         temp |= LVDS_PIPEB_SELECT;
5308                 } else {
5309                         temp &= ~LVDS_PIPEB_SELECT;
5310                 }
5311                 /* set the corresponsding LVDS_BORDER bit */
5312                 temp |= dev_priv->lvds_border_bits;
5313                 /* Set the B0-B3 data pairs corresponding to whether we're going to
5314                  * set the DPLLs for dual-channel mode or not.
5315                  */
5316                 if (clock.p2 == 7)
5317                         temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
5318                 else
5319                         temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
5320
5321                 /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
5322                  * appropriately here, but we need to look more thoroughly into how
5323                  * panels behave in the two modes.
5324                  */
5325                 /* set the dithering flag on LVDS as needed */
5326                 if (INTEL_INFO(dev)->gen >= 4) {
5327                         if (dev_priv->lvds_dither)
5328                                 temp |= LVDS_ENABLE_DITHER;
5329                         else
5330                                 temp &= ~LVDS_ENABLE_DITHER;
5331                 }
5332                 if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
5333                         lvds_sync |= LVDS_HSYNC_POLARITY;
5334                 if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
5335                         lvds_sync |= LVDS_VSYNC_POLARITY;
5336                 if ((temp & (LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY))
5337                     != lvds_sync) {
5338                         char flags[2] = "-+";
5339                         DRM_INFO("Changing LVDS panel from "
5340                                  "(%chsync, %cvsync) to (%chsync, %cvsync)\n",
5341                                  flags[!(temp & LVDS_HSYNC_POLARITY)],
5342                                  flags[!(temp & LVDS_VSYNC_POLARITY)],
5343                                  flags[!(lvds_sync & LVDS_HSYNC_POLARITY)],
5344                                  flags[!(lvds_sync & LVDS_VSYNC_POLARITY)]);
5345                         temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
5346                         temp |= lvds_sync;
5347                 }
5348                 I915_WRITE(LVDS, temp);
5349         }
5350
5351         if (is_dp) {
5352                 intel_dp_set_m_n(crtc, mode, adjusted_mode);
5353         }
5354
5355         I915_WRITE(DPLL(pipe), dpll);
5356
5357         /* Wait for the clocks to stabilize. */
5358         POSTING_READ(DPLL(pipe));
5359         udelay(150);
5360
5361         if (INTEL_INFO(dev)->gen >= 4) {
5362                 temp = 0;
5363                 if (is_sdvo) {
5364                         temp = intel_mode_get_pixel_multiplier(adjusted_mode);
5365                         if (temp > 1)
5366                                 temp = (temp - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
5367                         else
5368                                 temp = 0;
5369                 }
5370                 I915_WRITE(DPLL_MD(pipe), temp);
5371         } else {
5372                 /* The pixel multiplier can only be updated once the
5373                  * DPLL is enabled and the clocks are stable.
5374                  *
5375                  * So write it again.
5376                  */
5377                 I915_WRITE(DPLL(pipe), dpll);
5378         }
5379
5380         if (HAS_PIPE_CXSR(dev)) {
5381                 if (intel_crtc->lowfreq_avail) {
5382                         DRM_DEBUG_KMS("enabling CxSR downclocking\n");
5383                         pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
5384                 } else {
5385                         DRM_DEBUG_KMS("disabling CxSR downclocking\n");
5386                         pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK;
5387                 }
5388         }
5389
5390         pipeconf &= ~PIPECONF_INTERLACE_MASK;
5391         if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
5392                 pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
5393                 /* the chip adds 2 halflines automatically */
5394                 adjusted_mode->crtc_vdisplay -= 1;
5395                 adjusted_mode->crtc_vtotal -= 1;
5396                 adjusted_mode->crtc_vblank_start -= 1;
5397                 adjusted_mode->crtc_vblank_end -= 1;
5398                 adjusted_mode->crtc_vsync_end -= 1;
5399                 adjusted_mode->crtc_vsync_start -= 1;
5400         } else
5401                 pipeconf |= PIPECONF_PROGRESSIVE;
5402
5403         I915_WRITE(HTOTAL(pipe),
5404                    (adjusted_mode->crtc_hdisplay - 1) |
5405                    ((adjusted_mode->crtc_htotal - 1) << 16));
5406         I915_WRITE(HBLANK(pipe),
5407                    (adjusted_mode->crtc_hblank_start - 1) |
5408                    ((adjusted_mode->crtc_hblank_end - 1) << 16));
5409         I915_WRITE(HSYNC(pipe),
5410                    (adjusted_mode->crtc_hsync_start - 1) |
5411                    ((adjusted_mode->crtc_hsync_end - 1) << 16));
5412
5413         I915_WRITE(VTOTAL(pipe),
5414                    (adjusted_mode->crtc_vdisplay - 1) |
5415                    ((adjusted_mode->crtc_vtotal - 1) << 16));
5416         I915_WRITE(VBLANK(pipe),
5417                    (adjusted_mode->crtc_vblank_start - 1) |
5418                    ((adjusted_mode->crtc_vblank_end - 1) << 16));
5419         I915_WRITE(VSYNC(pipe),
5420                    (adjusted_mode->crtc_vsync_start - 1) |
5421                    ((adjusted_mode->crtc_vsync_end - 1) << 16));
5422
5423         /* pipesrc and dspsize control the size that is scaled from,
5424          * which should always be the user's requested size.
5425          */
5426         I915_WRITE(DSPSIZE(plane),
5427                    ((mode->vdisplay - 1) << 16) |
5428                    (mode->hdisplay - 1));
5429         I915_WRITE(DSPPOS(plane), 0);
5430         I915_WRITE(PIPESRC(pipe),
5431                    ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
5432
5433         I915_WRITE(PIPECONF(pipe), pipeconf);
5434         POSTING_READ(PIPECONF(pipe));
5435         intel_enable_pipe(dev_priv, pipe, false);
5436
5437         intel_wait_for_vblank(dev, pipe);
5438
5439         I915_WRITE(DSPCNTR(plane), dspcntr);
5440         POSTING_READ(DSPCNTR(plane));
5441         intel_enable_plane(dev_priv, plane, pipe);
5442
5443         ret = intel_pipe_set_base(crtc, x, y, old_fb);
5444
5445         intel_update_watermarks(dev);
5446
5447         return ret;
5448 }
5449
5450 /*
5451  * Initialize reference clocks when the driver loads
5452  */
5453 void ironlake_init_pch_refclk(struct drm_device *dev)
5454 {
5455         struct drm_i915_private *dev_priv = dev->dev_private;
5456         struct drm_mode_config *mode_config = &dev->mode_config;
5457         struct intel_encoder *encoder;
5458         u32 temp;
5459         bool has_lvds = false;
5460         bool has_cpu_edp = false;
5461         bool has_pch_edp = false;
5462         bool has_panel = false;
5463         bool has_ck505 = false;
5464         bool can_ssc = false;
5465
5466         /* We need to take the global config into account */
5467         list_for_each_entry(encoder, &mode_config->encoder_list,
5468                             base.head) {
5469                 switch (encoder->type) {
5470                 case INTEL_OUTPUT_LVDS:
5471                         has_panel = true;
5472                         has_lvds = true;
5473                         break;
5474                 case INTEL_OUTPUT_EDP:
5475                         has_panel = true;
5476                         if (intel_encoder_is_pch_edp(&encoder->base))
5477                                 has_pch_edp = true;
5478                         else
5479                                 has_cpu_edp = true;
5480                         break;
5481                 }
5482         }
5483
5484         if (HAS_PCH_IBX(dev)) {
5485                 has_ck505 = dev_priv->display_clock_mode;
5486                 can_ssc = has_ck505;
5487         } else {
5488                 has_ck505 = false;
5489                 can_ssc = true;
5490         }
5491
5492         DRM_DEBUG_KMS("has_panel %d has_lvds %d has_pch_edp %d has_cpu_edp %d has_ck505 %d\n",
5493                       has_panel, has_lvds, has_pch_edp, has_cpu_edp,
5494                       has_ck505);
5495
5496         /* Ironlake: try to setup display ref clock before DPLL
5497          * enabling. This is only under driver's control after
5498          * PCH B stepping, previous chipset stepping should be
5499          * ignoring this setting.
5500          */
5501         temp = I915_READ(PCH_DREF_CONTROL);
5502         /* Always enable nonspread source */
5503         temp &= ~DREF_NONSPREAD_SOURCE_MASK;
5504
5505         if (has_ck505)
5506                 temp |= DREF_NONSPREAD_CK505_ENABLE;
5507         else
5508                 temp |= DREF_NONSPREAD_SOURCE_ENABLE;
5509
5510         if (has_panel) {
5511                 temp &= ~DREF_SSC_SOURCE_MASK;
5512                 temp |= DREF_SSC_SOURCE_ENABLE;
5513
5514                 /* SSC must be turned on before enabling the CPU output  */
5515                 if (intel_panel_use_ssc(dev_priv) && can_ssc) {
5516                         DRM_DEBUG_KMS("Using SSC on panel\n");
5517                         temp |= DREF_SSC1_ENABLE;
5518                 }
5519
5520                 /* Get SSC going before enabling the outputs */
5521                 I915_WRITE(PCH_DREF_CONTROL, temp);
5522                 POSTING_READ(PCH_DREF_CONTROL);
5523                 udelay(200);
5524
5525                 temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
5526
5527                 /* Enable CPU source on CPU attached eDP */
5528                 if (has_cpu_edp) {
5529                         if (intel_panel_use_ssc(dev_priv) && can_ssc) {
5530                                 DRM_DEBUG_KMS("Using SSC on eDP\n");
5531                                 temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
5532                         }
5533                         else
5534                                 temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
5535                 } else
5536                         temp |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
5537
5538                 I915_WRITE(PCH_DREF_CONTROL, temp);
5539                 POSTING_READ(PCH_DREF_CONTROL);
5540                 udelay(200);
5541         } else {
5542                 DRM_DEBUG_KMS("Disabling SSC entirely\n");
5543
5544                 temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
5545
5546                 /* Turn off CPU output */
5547                 temp |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
5548
5549                 I915_WRITE(PCH_DREF_CONTROL, temp);
5550                 POSTING_READ(PCH_DREF_CONTROL);
5551                 udelay(200);
5552
5553                 /* Turn off the SSC source */
5554                 temp &= ~DREF_SSC_SOURCE_MASK;
5555                 temp |= DREF_SSC_SOURCE_DISABLE;
5556
5557                 /* Turn off SSC1 */
5558                 temp &= ~ DREF_SSC1_ENABLE;
5559
5560                 I915_WRITE(PCH_DREF_CONTROL, temp);
5561                 POSTING_READ(PCH_DREF_CONTROL);
5562                 udelay(200);
5563         }
5564 }
5565
5566 static int ironlake_get_refclk(struct drm_crtc *crtc)
5567 {
5568         struct drm_device *dev = crtc->dev;
5569         struct drm_i915_private *dev_priv = dev->dev_private;
5570         struct intel_encoder *encoder;
5571         struct drm_mode_config *mode_config = &dev->mode_config;
5572         struct intel_encoder *edp_encoder = NULL;
5573         int num_connectors = 0;
5574         bool is_lvds = false;
5575
5576         list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
5577                 if (encoder->base.crtc != crtc)
5578                         continue;
5579
5580                 switch (encoder->type) {
5581                 case INTEL_OUTPUT_LVDS:
5582                         is_lvds = true;
5583                         break;
5584                 case INTEL_OUTPUT_EDP:
5585                         edp_encoder = encoder;
5586                         break;
5587                 }
5588                 num_connectors++;
5589         }
5590
5591         if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
5592                 DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n",
5593                               dev_priv->lvds_ssc_freq);
5594                 return dev_priv->lvds_ssc_freq * 1000;
5595         }
5596
5597         return 120000;
5598 }
5599
5600 static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
5601                                   struct drm_display_mode *mode,
5602                                   struct drm_display_mode *adjusted_mode,
5603                                   int x, int y,
5604                                   struct drm_framebuffer *old_fb)
5605 {
5606         struct drm_device *dev = crtc->dev;
5607         struct drm_i915_private *dev_priv = dev->dev_private;
5608         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5609         int pipe = intel_crtc->pipe;
5610         int plane = intel_crtc->plane;
5611         int refclk, num_connectors = 0;
5612         intel_clock_t clock, reduced_clock;
5613         u32 dpll, fp = 0, fp2 = 0, dspcntr, pipeconf;
5614         bool ok, has_reduced_clock = false, is_sdvo = false;
5615         bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false;
5616         struct intel_encoder *has_edp_encoder = NULL;
5617         struct drm_mode_config *mode_config = &dev->mode_config;
5618         struct intel_encoder *encoder;
5619         const intel_limit_t *limit;
5620         int ret;
5621         struct fdi_m_n m_n = {0};
5622         u32 temp;
5623         u32 lvds_sync = 0;
5624         int target_clock, pixel_multiplier, lane, link_bw, factor;
5625         unsigned int pipe_bpp;
5626         bool dither;
5627
5628         list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
5629                 if (encoder->base.crtc != crtc)
5630                         continue;
5631
5632                 switch (encoder->type) {
5633                 case INTEL_OUTPUT_LVDS:
5634                         is_lvds = true;
5635                         break;
5636                 case INTEL_OUTPUT_SDVO:
5637                 case INTEL_OUTPUT_HDMI:
5638                         is_sdvo = true;
5639                         if (encoder->needs_tv_clock)
5640                                 is_tv = true;
5641                         break;
5642                 case INTEL_OUTPUT_TVOUT:
5643                         is_tv = true;
5644                         break;
5645                 case INTEL_OUTPUT_ANALOG:
5646                         is_crt = true;
5647                         break;
5648                 case INTEL_OUTPUT_DISPLAYPORT:
5649                         is_dp = true;
5650                         break;
5651                 case INTEL_OUTPUT_EDP:
5652                         has_edp_encoder = encoder;
5653                         break;
5654                 }
5655
5656                 num_connectors++;
5657         }
5658
5659         refclk = ironlake_get_refclk(crtc);
5660
5661         /*
5662          * Returns a set of divisors for the desired target clock with the given
5663          * refclk, or FALSE.  The returned values represent the clock equation:
5664          * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
5665          */
5666         limit = intel_limit(crtc, refclk);
5667         ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, NULL,
5668                              &clock);
5669         if (!ok) {
5670                 DRM_ERROR("Couldn't find PLL settings for mode!\n");
5671                 return -EINVAL;
5672         }
5673
5674         /* Ensure that the cursor is valid for the new mode before changing... */
5675         intel_crtc_update_cursor(crtc, true);
5676
5677         if (is_lvds && dev_priv->lvds_downclock_avail) {
5678                 /*
5679                  * Ensure we match the reduced clock's P to the target clock.
5680                  * If the clocks don't match, we can't switch the display clock
5681                  * by using the FP0/FP1. In such case we will disable the LVDS
5682                  * downclock feature.
5683                 */
5684                 has_reduced_clock = limit->find_pll(limit, crtc,
5685                                                     dev_priv->lvds_downclock,
5686                                                     refclk,
5687                                                     &clock,
5688                                                     &reduced_clock);
5689         }
5690         /* SDVO TV has fixed PLL values depend on its clock range,
5691            this mirrors vbios setting. */
5692         if (is_sdvo && is_tv) {
5693                 if (adjusted_mode->clock >= 100000
5694                     && adjusted_mode->clock < 140500) {
5695                         clock.p1 = 2;
5696                         clock.p2 = 10;
5697                         clock.n = 3;
5698                         clock.m1 = 16;
5699                         clock.m2 = 8;
5700                 } else if (adjusted_mode->clock >= 140500
5701                            && adjusted_mode->clock <= 200000) {
5702                         clock.p1 = 1;
5703                         clock.p2 = 10;
5704                         clock.n = 6;
5705                         clock.m1 = 12;
5706                         clock.m2 = 8;
5707                 }
5708         }
5709
5710         /* FDI link */
5711         pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
5712         lane = 0;
5713         /* CPU eDP doesn't require FDI link, so just set DP M/N
5714            according to current link config */
5715         if (has_edp_encoder &&
5716             !intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
5717                 target_clock = mode->clock;
5718                 intel_edp_link_config(has_edp_encoder,
5719                                       &lane, &link_bw);
5720         } else {
5721                 /* [e]DP over FDI requires target mode clock
5722                    instead of link clock */
5723                 if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base))
5724                         target_clock = mode->clock;
5725                 else
5726                         target_clock = adjusted_mode->clock;
5727
5728                 /* FDI is a binary signal running at ~2.7GHz, encoding
5729                  * each output octet as 10 bits. The actual frequency
5730                  * is stored as a divider into a 100MHz clock, and the
5731                  * mode pixel clock is stored in units of 1KHz.
5732                  * Hence the bw of each lane in terms of the mode signal
5733                  * is:
5734                  */
5735                 link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10;
5736         }
5737
5738         /* determine panel color depth */
5739         temp = I915_READ(PIPECONF(pipe));
5740         temp &= ~PIPE_BPC_MASK;
5741         dither = intel_choose_pipe_bpp_dither(crtc, &pipe_bpp, mode);
5742         switch (pipe_bpp) {
5743         case 18:
5744                 temp |= PIPE_6BPC;
5745                 break;
5746         case 24:
5747                 temp |= PIPE_8BPC;
5748                 break;
5749         case 30:
5750                 temp |= PIPE_10BPC;
5751                 break;
5752         case 36:
5753                 temp |= PIPE_12BPC;
5754                 break;
5755         default:
5756                 WARN(1, "intel_choose_pipe_bpp returned invalid value %d\n",
5757                         pipe_bpp);
5758                 temp |= PIPE_8BPC;
5759                 pipe_bpp = 24;
5760                 break;
5761         }
5762
5763         intel_crtc->bpp = pipe_bpp;
5764         I915_WRITE(PIPECONF(pipe), temp);
5765
5766         if (!lane) {
5767                 /*
5768                  * Account for spread spectrum to avoid
5769                  * oversubscribing the link. Max center spread
5770                  * is 2.5%; use 5% for safety's sake.
5771                  */
5772                 u32 bps = target_clock * intel_crtc->bpp * 21 / 20;
5773                 lane = bps / (link_bw * 8) + 1;
5774         }
5775
5776         intel_crtc->fdi_lanes = lane;
5777
5778         if (pixel_multiplier > 1)
5779                 link_bw *= pixel_multiplier;
5780         ironlake_compute_m_n(intel_crtc->bpp, lane, target_clock, link_bw,
5781                              &m_n);
5782
5783         fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
5784         if (has_reduced_clock)
5785                 fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 |
5786                         reduced_clock.m2;
5787
5788         /* Enable autotuning of the PLL clock (if permissible) */
5789         factor = 21;
5790         if (is_lvds) {
5791                 if ((intel_panel_use_ssc(dev_priv) &&
5792                      dev_priv->lvds_ssc_freq == 100) ||
5793                     (I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP)
5794                         factor = 25;
5795         } else if (is_sdvo && is_tv)
5796                 factor = 20;
5797
5798         if (clock.m < factor * clock.n)
5799                 fp |= FP_CB_TUNE;
5800
5801         dpll = 0;
5802
5803         if (is_lvds)
5804                 dpll |= DPLLB_MODE_LVDS;
5805         else
5806                 dpll |= DPLLB_MODE_DAC_SERIAL;
5807         if (is_sdvo) {
5808                 int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
5809                 if (pixel_multiplier > 1) {
5810                         dpll |= (pixel_multiplier - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
5811                 }
5812                 dpll |= DPLL_DVO_HIGH_SPEED;
5813         }
5814         if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base))
5815                 dpll |= DPLL_DVO_HIGH_SPEED;
5816
5817         /* compute bitmask from p1 value */
5818         dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
5819         /* also FPA1 */
5820         dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
5821
5822         switch (clock.p2) {
5823         case 5:
5824                 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
5825                 break;
5826         case 7:
5827                 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
5828                 break;
5829         case 10:
5830                 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
5831                 break;
5832         case 14:
5833                 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
5834                 break;
5835         }
5836
5837         if (is_sdvo && is_tv)
5838                 dpll |= PLL_REF_INPUT_TVCLKINBC;
5839         else if (is_tv)
5840                 /* XXX: just matching BIOS for now */
5841                 /*      dpll |= PLL_REF_INPUT_TVCLKINBC; */
5842                 dpll |= 3;
5843         else if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2)
5844                 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
5845         else
5846                 dpll |= PLL_REF_INPUT_DREFCLK;
5847
5848         /* setup pipeconf */
5849         pipeconf = I915_READ(PIPECONF(pipe));
5850
5851         /* Set up the display plane register */
5852         dspcntr = DISPPLANE_GAMMA_ENABLE;
5853
5854         DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe);
5855         drm_mode_debug_printmodeline(mode);
5856
5857         /* PCH eDP needs FDI, but CPU eDP does not */
5858         if (!intel_crtc->no_pll) {
5859                 if (!has_edp_encoder ||
5860                     intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
5861                         I915_WRITE(PCH_FP0(pipe), fp);
5862                         I915_WRITE(PCH_DPLL(pipe), dpll & ~DPLL_VCO_ENABLE);
5863
5864                         POSTING_READ(PCH_DPLL(pipe));
5865                         udelay(150);
5866                 }
5867         } else {
5868                 if (dpll == (I915_READ(PCH_DPLL(0)) & 0x7fffffff) &&
5869                     fp == I915_READ(PCH_FP0(0))) {
5870                         intel_crtc->use_pll_a = true;
5871                         DRM_DEBUG_KMS("using pipe a dpll\n");
5872                 } else if (dpll == (I915_READ(PCH_DPLL(1)) & 0x7fffffff) &&
5873                            fp == I915_READ(PCH_FP0(1))) {
5874                         intel_crtc->use_pll_a = false;
5875                         DRM_DEBUG_KMS("using pipe b dpll\n");
5876                 } else {
5877                         DRM_DEBUG_KMS("no matching PLL configuration for pipe 2\n");
5878                         return -EINVAL;
5879                 }
5880         }
5881
5882         /* The LVDS pin pair needs to be on before the DPLLs are enabled.
5883          * This is an exception to the general rule that mode_set doesn't turn
5884          * things on.
5885          */
5886         if (is_lvds) {
5887                 temp = I915_READ(PCH_LVDS);
5888                 temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
5889                 if (HAS_PCH_CPT(dev)) {
5890                         temp &= ~PORT_TRANS_SEL_MASK;
5891                         temp |= PORT_TRANS_SEL_CPT(pipe);
5892                 } else {
5893                         if (pipe == 1)
5894                                 temp |= LVDS_PIPEB_SELECT;
5895                         else
5896                                 temp &= ~LVDS_PIPEB_SELECT;
5897                 }
5898
5899                 /* set the corresponsding LVDS_BORDER bit */
5900                 temp |= dev_priv->lvds_border_bits;
5901                 /* Set the B0-B3 data pairs corresponding to whether we're going to
5902                  * set the DPLLs for dual-channel mode or not.
5903                  */
5904                 if (clock.p2 == 7)
5905                         temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
5906                 else
5907                         temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
5908
5909                 /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
5910                  * appropriately here, but we need to look more thoroughly into how
5911                  * panels behave in the two modes.
5912                  */
5913                 if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
5914                         lvds_sync |= LVDS_HSYNC_POLARITY;
5915                 if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
5916                         lvds_sync |= LVDS_VSYNC_POLARITY;
5917                 if ((temp & (LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY))
5918                     != lvds_sync) {
5919                         char flags[2] = "-+";
5920                         DRM_INFO("Changing LVDS panel from "
5921                                  "(%chsync, %cvsync) to (%chsync, %cvsync)\n",
5922                                  flags[!(temp & LVDS_HSYNC_POLARITY)],
5923                                  flags[!(temp & LVDS_VSYNC_POLARITY)],
5924                                  flags[!(lvds_sync & LVDS_HSYNC_POLARITY)],
5925                                  flags[!(lvds_sync & LVDS_VSYNC_POLARITY)]);
5926                         temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
5927                         temp |= lvds_sync;
5928                 }
5929                 I915_WRITE(PCH_LVDS, temp);
5930         }
5931
5932         pipeconf &= ~PIPECONF_DITHER_EN;
5933         pipeconf &= ~PIPECONF_DITHER_TYPE_MASK;
5934         if ((is_lvds && dev_priv->lvds_dither) || dither) {
5935                 pipeconf |= PIPECONF_DITHER_EN;
5936                 pipeconf |= PIPECONF_DITHER_TYPE_SP;
5937         }
5938         if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
5939                 intel_dp_set_m_n(crtc, mode, adjusted_mode);
5940         } else {
5941                 /* For non-DP output, clear any trans DP clock recovery setting.*/
5942                 I915_WRITE(TRANSDATA_M1(pipe), 0);
5943                 I915_WRITE(TRANSDATA_N1(pipe), 0);
5944                 I915_WRITE(TRANSDPLINK_M1(pipe), 0);
5945                 I915_WRITE(TRANSDPLINK_N1(pipe), 0);
5946         }
5947
5948         if (!intel_crtc->no_pll &&
5949             (!has_edp_encoder ||
5950              intel_encoder_is_pch_edp(&has_edp_encoder->base))) {
5951                 I915_WRITE(PCH_DPLL(pipe), dpll);
5952
5953                 /* Wait for the clocks to stabilize. */
5954                 POSTING_READ(PCH_DPLL(pipe));
5955                 udelay(150);
5956
5957                 /* The pixel multiplier can only be updated once the
5958                  * DPLL is enabled and the clocks are stable.
5959                  *
5960                  * So write it again.
5961                  */
5962                 I915_WRITE(PCH_DPLL(pipe), dpll);
5963         }
5964
5965         intel_crtc->lowfreq_avail = false;
5966         if (!intel_crtc->no_pll) {
5967                 if (is_lvds && has_reduced_clock && i915_powersave) {
5968                         I915_WRITE(PCH_FP1(pipe), fp2);
5969                         intel_crtc->lowfreq_avail = true;
5970                         if (HAS_PIPE_CXSR(dev)) {
5971                                 DRM_DEBUG_KMS("enabling CxSR downclocking\n");
5972                                 pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
5973                         }
5974                 } else {
5975                         I915_WRITE(PCH_FP1(pipe), fp);
5976                         if (HAS_PIPE_CXSR(dev)) {
5977                                 DRM_DEBUG_KMS("disabling CxSR downclocking\n");
5978                                 pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK;
5979                         }
5980                 }
5981         }
5982
5983         pipeconf &= ~PIPECONF_INTERLACE_MASK;
5984         if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
5985                 pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
5986                 /* the chip adds 2 halflines automatically */
5987                 adjusted_mode->crtc_vdisplay -= 1;
5988                 adjusted_mode->crtc_vtotal -= 1;
5989                 adjusted_mode->crtc_vblank_start -= 1;
5990                 adjusted_mode->crtc_vblank_end -= 1;
5991                 adjusted_mode->crtc_vsync_end -= 1;
5992                 adjusted_mode->crtc_vsync_start -= 1;
5993         } else
5994                 pipeconf |= PIPECONF_PROGRESSIVE;
5995
5996         I915_WRITE(HTOTAL(pipe),
5997                    (adjusted_mode->crtc_hdisplay - 1) |
5998                    ((adjusted_mode->crtc_htotal - 1) << 16));
5999         I915_WRITE(HBLANK(pipe),
6000                    (adjusted_mode->crtc_hblank_start - 1) |
6001                    ((adjusted_mode->crtc_hblank_end - 1) << 16));
6002         I915_WRITE(HSYNC(pipe),
6003                    (adjusted_mode->crtc_hsync_start - 1) |
6004                    ((adjusted_mode->crtc_hsync_end - 1) << 16));
6005
6006         I915_WRITE(VTOTAL(pipe),
6007                    (adjusted_mode->crtc_vdisplay - 1) |
6008                    ((adjusted_mode->crtc_vtotal - 1) << 16));
6009         I915_WRITE(VBLANK(pipe),
6010                    (adjusted_mode->crtc_vblank_start - 1) |
6011                    ((adjusted_mode->crtc_vblank_end - 1) << 16));
6012         I915_WRITE(VSYNC(pipe),
6013                    (adjusted_mode->crtc_vsync_start - 1) |
6014                    ((adjusted_mode->crtc_vsync_end - 1) << 16));
6015
6016         /* pipesrc controls the size that is scaled from, which should
6017          * always be the user's requested size.
6018          */
6019         I915_WRITE(PIPESRC(pipe),
6020                    ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
6021
6022         I915_WRITE(PIPE_DATA_M1(pipe), TU_SIZE(m_n.tu) | m_n.gmch_m);
6023         I915_WRITE(PIPE_DATA_N1(pipe), m_n.gmch_n);
6024         I915_WRITE(PIPE_LINK_M1(pipe), m_n.link_m);
6025         I915_WRITE(PIPE_LINK_N1(pipe), m_n.link_n);
6026
6027         if (has_edp_encoder &&
6028             !intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
6029                 ironlake_set_pll_edp(crtc, adjusted_mode->clock);
6030         }
6031
6032         I915_WRITE(PIPECONF(pipe), pipeconf);
6033         POSTING_READ(PIPECONF(pipe));
6034
6035         intel_wait_for_vblank(dev, pipe);
6036
6037         I915_WRITE(DSPCNTR(plane), dspcntr);
6038         POSTING_READ(DSPCNTR(plane));
6039
6040         ret = intel_pipe_set_base(crtc, x, y, old_fb);
6041
6042         intel_update_watermarks(dev);
6043
6044         return ret;
6045 }
6046
6047 static int intel_crtc_mode_set(struct drm_crtc *crtc,
6048                                struct drm_display_mode *mode,
6049                                struct drm_display_mode *adjusted_mode,
6050                                int x, int y,
6051                                struct drm_framebuffer *old_fb)
6052 {
6053         struct drm_device *dev = crtc->dev;
6054         struct drm_i915_private *dev_priv = dev->dev_private;
6055         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6056         int pipe = intel_crtc->pipe;
6057         int ret;
6058
6059         drm_vblank_pre_modeset(dev, pipe);
6060
6061         ret = dev_priv->display.crtc_mode_set(crtc, mode, adjusted_mode,
6062                                               x, y, old_fb);
6063         drm_vblank_post_modeset(dev, pipe);
6064
6065         if (ret)
6066                 intel_crtc->dpms_mode = DRM_MODE_DPMS_OFF;
6067         else
6068                 intel_crtc->dpms_mode = DRM_MODE_DPMS_ON;
6069
6070         return ret;
6071 }
6072
6073 static bool intel_eld_uptodate(struct drm_connector *connector,
6074                                int reg_eldv, uint32_t bits_eldv,
6075                                int reg_elda, uint32_t bits_elda,
6076                                int reg_edid)
6077 {
6078         struct drm_i915_private *dev_priv = connector->dev->dev_private;
6079         uint8_t *eld = connector->eld;
6080         uint32_t i;
6081
6082         i = I915_READ(reg_eldv);
6083         i &= bits_eldv;
6084
6085         if (!eld[0])
6086                 return !i;
6087
6088         if (!i)
6089                 return false;
6090
6091         i = I915_READ(reg_elda);
6092         i &= ~bits_elda;
6093         I915_WRITE(reg_elda, i);
6094
6095         for (i = 0; i < eld[2]; i++)
6096                 if (I915_READ(reg_edid) != *((uint32_t *)eld + i))
6097                         return false;
6098
6099         return true;
6100 }
6101
6102 static void g4x_write_eld(struct drm_connector *connector,
6103                           struct drm_crtc *crtc)
6104 {
6105         struct drm_i915_private *dev_priv = connector->dev->dev_private;
6106         uint8_t *eld = connector->eld;
6107         uint32_t eldv;
6108         uint32_t len;
6109         uint32_t i;
6110
6111         i = I915_READ(G4X_AUD_VID_DID);
6112
6113         if (i == INTEL_AUDIO_DEVBLC || i == INTEL_AUDIO_DEVCL)
6114                 eldv = G4X_ELDV_DEVCL_DEVBLC;
6115         else
6116                 eldv = G4X_ELDV_DEVCTG;
6117
6118         if (intel_eld_uptodate(connector,
6119                                G4X_AUD_CNTL_ST, eldv,
6120                                G4X_AUD_CNTL_ST, G4X_ELD_ADDR,
6121                                G4X_HDMIW_HDMIEDID))
6122                 return;
6123
6124         i = I915_READ(G4X_AUD_CNTL_ST);
6125         i &= ~(eldv | G4X_ELD_ADDR);
6126         len = (i >> 9) & 0x1f;          /* ELD buffer size */
6127         I915_WRITE(G4X_AUD_CNTL_ST, i);
6128
6129         if (!eld[0])
6130                 return;
6131
6132         len = min_t(uint8_t, eld[2], len);
6133         DRM_DEBUG_DRIVER("ELD size %d\n", len);
6134         for (i = 0; i < len; i++)
6135                 I915_WRITE(G4X_HDMIW_HDMIEDID, *((uint32_t *)eld + i));
6136
6137         i = I915_READ(G4X_AUD_CNTL_ST);
6138         i |= eldv;
6139         I915_WRITE(G4X_AUD_CNTL_ST, i);
6140 }
6141
6142 static void ironlake_write_eld(struct drm_connector *connector,
6143                                      struct drm_crtc *crtc)
6144 {
6145         struct drm_i915_private *dev_priv = connector->dev->dev_private;
6146         uint8_t *eld = connector->eld;
6147         uint32_t eldv;
6148         uint32_t i;
6149         int len;
6150         int hdmiw_hdmiedid;
6151         int aud_config;
6152         int aud_cntl_st;
6153         int aud_cntrl_st2;
6154
6155         if (HAS_PCH_IBX(connector->dev)) {
6156                 hdmiw_hdmiedid = IBX_HDMIW_HDMIEDID_A;
6157                 aud_config = IBX_AUD_CONFIG_A;
6158                 aud_cntl_st = IBX_AUD_CNTL_ST_A;
6159                 aud_cntrl_st2 = IBX_AUD_CNTL_ST2;
6160         } else {
6161                 hdmiw_hdmiedid = CPT_HDMIW_HDMIEDID_A;
6162                 aud_config = CPT_AUD_CONFIG_A;
6163                 aud_cntl_st = CPT_AUD_CNTL_ST_A;
6164                 aud_cntrl_st2 = CPT_AUD_CNTRL_ST2;
6165         }
6166
6167         i = to_intel_crtc(crtc)->pipe;
6168         hdmiw_hdmiedid += i * 0x100;
6169         aud_cntl_st += i * 0x100;
6170         aud_config += i * 0x100;
6171
6172         DRM_DEBUG_DRIVER("ELD on pipe %c\n", pipe_name(i));
6173
6174         i = I915_READ(aud_cntl_st);
6175         i = (i >> 29) & 0x3;            /* DIP_Port_Select, 0x1 = PortB */
6176         if (!i) {
6177                 DRM_DEBUG_DRIVER("Audio directed to unknown port\n");
6178                 /* operate blindly on all ports */
6179                 eldv = IBX_ELD_VALIDB;
6180                 eldv |= IBX_ELD_VALIDB << 4;
6181                 eldv |= IBX_ELD_VALIDB << 8;
6182         } else {
6183                 DRM_DEBUG_DRIVER("ELD on port %c\n", 'A' + i);
6184                 eldv = IBX_ELD_VALIDB << ((i - 1) * 4);
6185         }
6186
6187         if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
6188                 DRM_DEBUG_DRIVER("ELD: DisplayPort detected\n");
6189                 eld[5] |= (1 << 2);     /* Conn_Type, 0x1 = DisplayPort */
6190                 I915_WRITE(aud_config, AUD_CONFIG_N_VALUE_INDEX); /* 0x1 = DP */
6191         } else
6192                 I915_WRITE(aud_config, 0);
6193
6194         if (intel_eld_uptodate(connector,
6195                                aud_cntrl_st2, eldv,
6196                                aud_cntl_st, IBX_ELD_ADDRESS,
6197                                hdmiw_hdmiedid))
6198                 return;
6199
6200         i = I915_READ(aud_cntrl_st2);
6201         i &= ~eldv;
6202         I915_WRITE(aud_cntrl_st2, i);
6203
6204         if (!eld[0])
6205                 return;
6206
6207         i = I915_READ(aud_cntl_st);
6208         i &= ~IBX_ELD_ADDRESS;
6209         I915_WRITE(aud_cntl_st, i);
6210
6211         len = min_t(uint8_t, eld[2], 21);       /* 84 bytes of hw ELD buffer */
6212         DRM_DEBUG_DRIVER("ELD size %d\n", len);
6213         for (i = 0; i < len; i++)
6214                 I915_WRITE(hdmiw_hdmiedid, *((uint32_t *)eld + i));
6215
6216         i = I915_READ(aud_cntrl_st2);
6217         i |= eldv;
6218         I915_WRITE(aud_cntrl_st2, i);
6219 }
6220
6221 void intel_write_eld(struct drm_encoder *encoder,
6222                      struct drm_display_mode *mode)
6223 {
6224         struct drm_crtc *crtc = encoder->crtc;
6225         struct drm_connector *connector;
6226         struct drm_device *dev = encoder->dev;
6227         struct drm_i915_private *dev_priv = dev->dev_private;
6228
6229         connector = drm_select_eld(encoder, mode);
6230         if (!connector)
6231                 return;
6232
6233         DRM_DEBUG_DRIVER("ELD on [CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
6234                          connector->base.id,
6235                          drm_get_connector_name(connector),
6236                          connector->encoder->base.id,
6237                          drm_get_encoder_name(connector->encoder));
6238
6239         connector->eld[6] = drm_av_sync_delay(connector, mode) / 2;
6240
6241         if (dev_priv->display.write_eld)
6242                 dev_priv->display.write_eld(connector, crtc);
6243 }
6244
6245 /** Loads the palette/gamma unit for the CRTC with the prepared values */
6246 void intel_crtc_load_lut(struct drm_crtc *crtc)
6247 {
6248         struct drm_device *dev = crtc->dev;
6249         struct drm_i915_private *dev_priv = dev->dev_private;
6250         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6251         int palreg = PALETTE(intel_crtc->pipe);
6252         int i;
6253
6254         /* The clocks have to be on to load the palette. */
6255         if (!crtc->enabled)
6256                 return;
6257
6258         /* use legacy palette for Ironlake */
6259         if (HAS_PCH_SPLIT(dev))
6260                 palreg = LGC_PALETTE(intel_crtc->pipe);
6261
6262         for (i = 0; i < 256; i++) {
6263                 I915_WRITE(palreg + 4 * i,
6264                            (intel_crtc->lut_r[i] << 16) |
6265                            (intel_crtc->lut_g[i] << 8) |
6266                            intel_crtc->lut_b[i]);
6267         }
6268 }
6269
6270 static void i845_update_cursor(struct drm_crtc *crtc, u32 base)
6271 {
6272         struct drm_device *dev = crtc->dev;
6273         struct drm_i915_private *dev_priv = dev->dev_private;
6274         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6275         bool visible = base != 0;
6276         u32 cntl;
6277
6278         if (intel_crtc->cursor_visible == visible)
6279                 return;
6280
6281         cntl = I915_READ(_CURACNTR);
6282         if (visible) {
6283                 /* On these chipsets we can only modify the base whilst
6284                  * the cursor is disabled.
6285                  */
6286                 I915_WRITE(_CURABASE, base);
6287
6288                 cntl &= ~(CURSOR_FORMAT_MASK);
6289                 /* XXX width must be 64, stride 256 => 0x00 << 28 */
6290                 cntl |= CURSOR_ENABLE |
6291                         CURSOR_GAMMA_ENABLE |
6292                         CURSOR_FORMAT_ARGB;
6293         } else
6294                 cntl &= ~(CURSOR_ENABLE | CURSOR_GAMMA_ENABLE);
6295         I915_WRITE(_CURACNTR, cntl);
6296
6297         intel_crtc->cursor_visible = visible;
6298 }
6299
6300 static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base)
6301 {
6302         struct drm_device *dev = crtc->dev;
6303         struct drm_i915_private *dev_priv = dev->dev_private;
6304         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6305         int pipe = intel_crtc->pipe;
6306         bool visible = base != 0;
6307
6308         if (intel_crtc->cursor_visible != visible) {
6309                 uint32_t cntl = I915_READ(CURCNTR(pipe));
6310                 if (base) {
6311                         cntl &= ~(CURSOR_MODE | MCURSOR_PIPE_SELECT);
6312                         cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
6313                         cntl |= pipe << 28; /* Connect to correct pipe */
6314                 } else {
6315                         cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
6316                         cntl |= CURSOR_MODE_DISABLE;
6317                 }
6318                 I915_WRITE(CURCNTR(pipe), cntl);
6319
6320                 intel_crtc->cursor_visible = visible;
6321         }
6322         /* and commit changes on next vblank */
6323         I915_WRITE(CURBASE(pipe), base);
6324 }
6325
6326 static void ivb_update_cursor(struct drm_crtc *crtc, u32 base)
6327 {
6328         struct drm_device *dev = crtc->dev;
6329         struct drm_i915_private *dev_priv = dev->dev_private;
6330         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6331         int pipe = intel_crtc->pipe;
6332         bool visible = base != 0;
6333
6334         if (intel_crtc->cursor_visible != visible) {
6335                 uint32_t cntl = I915_READ(CURCNTR_IVB(pipe));
6336                 if (base) {
6337                         cntl &= ~CURSOR_MODE;
6338                         cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
6339                 } else {
6340                         cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
6341                         cntl |= CURSOR_MODE_DISABLE;
6342                 }
6343                 I915_WRITE(CURCNTR_IVB(pipe), cntl);
6344
6345                 intel_crtc->cursor_visible = visible;
6346         }
6347         /* and commit changes on next vblank */
6348         I915_WRITE(CURBASE_IVB(pipe), base);
6349 }
6350
6351 /* If no-part of the cursor is visible on the framebuffer, then the GPU may hang... */
6352 static void intel_crtc_update_cursor(struct drm_crtc *crtc,
6353                                      bool on)
6354 {
6355         struct drm_device *dev = crtc->dev;
6356         struct drm_i915_private *dev_priv = dev->dev_private;
6357         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6358         int pipe = intel_crtc->pipe;
6359         int x = intel_crtc->cursor_x;
6360         int y = intel_crtc->cursor_y;
6361         u32 base, pos;
6362         bool visible;
6363
6364         pos = 0;
6365
6366         if (on && crtc->enabled && crtc->fb) {
6367                 base = intel_crtc->cursor_addr;
6368                 if (x > (int) crtc->fb->width)
6369                         base = 0;
6370
6371                 if (y > (int) crtc->fb->height)
6372                         base = 0;
6373         } else
6374                 base = 0;
6375
6376         if (x < 0) {
6377                 if (x + intel_crtc->cursor_width < 0)
6378                         base = 0;
6379
6380                 pos |= CURSOR_POS_SIGN << CURSOR_X_SHIFT;
6381                 x = -x;
6382         }
6383         pos |= x << CURSOR_X_SHIFT;
6384
6385         if (y < 0) {
6386                 if (y + intel_crtc->cursor_height < 0)
6387                         base = 0;
6388
6389                 pos |= CURSOR_POS_SIGN << CURSOR_Y_SHIFT;
6390                 y = -y;
6391         }
6392         pos |= y << CURSOR_Y_SHIFT;
6393
6394         visible = base != 0;
6395         if (!visible && !intel_crtc->cursor_visible)
6396                 return;
6397
6398         if (IS_IVYBRIDGE(dev)) {
6399                 I915_WRITE(CURPOS_IVB(pipe), pos);
6400                 ivb_update_cursor(crtc, base);
6401         } else {
6402                 I915_WRITE(CURPOS(pipe), pos);
6403                 if (IS_845G(dev) || IS_I865G(dev))
6404                         i845_update_cursor(crtc, base);
6405                 else
6406                         i9xx_update_cursor(crtc, base);
6407         }
6408
6409         if (visible)
6410                 intel_mark_busy(dev, to_intel_framebuffer(crtc->fb)->obj);
6411 }
6412
6413 static int intel_crtc_cursor_set(struct drm_crtc *crtc,
6414                                  struct drm_file *file,
6415                                  uint32_t handle,
6416                                  uint32_t width, uint32_t height)
6417 {
6418         struct drm_device *dev = crtc->dev;
6419         struct drm_i915_private *dev_priv = dev->dev_private;
6420         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6421         struct drm_i915_gem_object *obj;
6422         uint32_t addr;
6423         int ret;
6424
6425         DRM_DEBUG_KMS("\n");
6426
6427         /* if we want to turn off the cursor ignore width and height */
6428         if (!handle) {
6429                 DRM_DEBUG_KMS("cursor off\n");
6430                 addr = 0;
6431                 obj = NULL;
6432                 mutex_lock(&dev->struct_mutex);
6433                 goto finish;
6434         }
6435
6436         /* Currently we only support 64x64 cursors */
6437         if (width != 64 || height != 64) {
6438                 DRM_ERROR("we currently only support 64x64 cursors\n");
6439                 return -EINVAL;
6440         }
6441
6442         obj = to_intel_bo(drm_gem_object_lookup(dev, file, handle));
6443         if (&obj->base == NULL)
6444                 return -ENOENT;
6445
6446         if (obj->base.size < width * height * 4) {
6447                 DRM_ERROR("buffer is to small\n");
6448                 ret = -ENOMEM;
6449                 goto fail;
6450         }
6451
6452         /* we only need to pin inside GTT if cursor is non-phy */
6453         mutex_lock(&dev->struct_mutex);
6454         if (!dev_priv->info->cursor_needs_physical) {
6455                 if (obj->tiling_mode) {
6456                         DRM_ERROR("cursor cannot be tiled\n");
6457                         ret = -EINVAL;
6458                         goto fail_locked;
6459                 }
6460
6461                 ret = i915_gem_object_pin_to_display_plane(obj, 0, NULL);
6462                 if (ret) {
6463                         DRM_ERROR("failed to move cursor bo into the GTT\n");
6464                         goto fail_locked;
6465                 }
6466
6467                 ret = i915_gem_object_put_fence(obj);
6468                 if (ret) {
6469                         DRM_ERROR("failed to release fence for cursor");
6470                         goto fail_unpin;
6471                 }
6472
6473                 addr = obj->gtt_offset;
6474         } else {
6475                 int align = IS_I830(dev) ? 16 * 1024 : 256;
6476                 ret = i915_gem_attach_phys_object(dev, obj,
6477                                                   (intel_crtc->pipe == 0) ? I915_GEM_PHYS_CURSOR_0 : I915_GEM_PHYS_CURSOR_1,
6478                                                   align);
6479                 if (ret) {
6480                         DRM_ERROR("failed to attach phys object\n");
6481                         goto fail_locked;
6482                 }
6483                 addr = obj->phys_obj->handle->busaddr;
6484         }
6485
6486         if (IS_GEN2(dev))
6487                 I915_WRITE(CURSIZE, (height << 12) | width);
6488
6489  finish:
6490         if (intel_crtc->cursor_bo) {
6491                 if (dev_priv->info->cursor_needs_physical) {
6492                         if (intel_crtc->cursor_bo != obj)
6493                                 i915_gem_detach_phys_object(dev, intel_crtc->cursor_bo);
6494                 } else
6495                         i915_gem_object_unpin(intel_crtc->cursor_bo);
6496                 drm_gem_object_unreference(&intel_crtc->cursor_bo->base);
6497         }
6498
6499         mutex_unlock(&dev->struct_mutex);
6500
6501         intel_crtc->cursor_addr = addr;
6502         intel_crtc->cursor_bo = obj;
6503         intel_crtc->cursor_width = width;
6504         intel_crtc->cursor_height = height;
6505
6506         intel_crtc_update_cursor(crtc, true);
6507
6508         return 0;
6509 fail_unpin:
6510         i915_gem_object_unpin(obj);
6511 fail_locked:
6512         mutex_unlock(&dev->struct_mutex);
6513 fail:
6514         drm_gem_object_unreference_unlocked(&obj->base);
6515         return ret;
6516 }
6517
6518 static int intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
6519 {
6520         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6521
6522         intel_crtc->cursor_x = x;
6523         intel_crtc->cursor_y = y;
6524
6525         intel_crtc_update_cursor(crtc, true);
6526
6527         return 0;
6528 }
6529
6530 /** Sets the color ramps on behalf of RandR */
6531 void intel_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
6532                                  u16 blue, int regno)
6533 {
6534         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6535
6536         intel_crtc->lut_r[regno] = red >> 8;
6537         intel_crtc->lut_g[regno] = green >> 8;
6538         intel_crtc->lut_b[regno] = blue >> 8;
6539 }
6540
6541 void intel_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green,
6542                              u16 *blue, int regno)
6543 {
6544         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6545
6546         *red = intel_crtc->lut_r[regno] << 8;
6547         *green = intel_crtc->lut_g[regno] << 8;
6548         *blue = intel_crtc->lut_b[regno] << 8;
6549 }
6550
6551 static void intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
6552                                  u16 *blue, uint32_t start, uint32_t size)
6553 {
6554         int end = (start + size > 256) ? 256 : start + size, i;
6555         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6556
6557         for (i = start; i < end; i++) {
6558                 intel_crtc->lut_r[i] = red[i] >> 8;
6559                 intel_crtc->lut_g[i] = green[i] >> 8;
6560                 intel_crtc->lut_b[i] = blue[i] >> 8;
6561         }
6562
6563         intel_crtc_load_lut(crtc);
6564 }
6565
6566 /**
6567  * Get a pipe with a simple mode set on it for doing load-based monitor
6568  * detection.
6569  *
6570  * It will be up to the load-detect code to adjust the pipe as appropriate for
6571  * its requirements.  The pipe will be connected to no other encoders.
6572  *
6573  * Currently this code will only succeed if there is a pipe with no encoders
6574  * configured for it.  In the future, it could choose to temporarily disable
6575  * some outputs to free up a pipe for its use.
6576  *
6577  * \return crtc, or NULL if no pipes are available.
6578  */
6579
6580 /* VESA 640x480x72Hz mode to set on the pipe */
6581 static struct drm_display_mode load_detect_mode = {
6582         DRM_MODE("640x480", DRM_MODE_TYPE_DEFAULT, 31500, 640, 664,
6583                  704, 832, 0, 480, 489, 491, 520, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
6584 };
6585
6586 static struct drm_framebuffer *
6587 intel_framebuffer_create(struct drm_device *dev,
6588                          struct drm_mode_fb_cmd2 *mode_cmd,
6589                          struct drm_i915_gem_object *obj)
6590 {
6591         struct intel_framebuffer *intel_fb;
6592         int ret;
6593
6594         intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
6595         if (!intel_fb) {
6596                 drm_gem_object_unreference_unlocked(&obj->base);
6597                 return ERR_PTR(-ENOMEM);
6598         }
6599
6600         ret = intel_framebuffer_init(dev, intel_fb, mode_cmd, obj);
6601         if (ret) {
6602                 drm_gem_object_unreference_unlocked(&obj->base);
6603                 kfree(intel_fb);
6604                 return ERR_PTR(ret);
6605         }
6606
6607         return &intel_fb->base;
6608 }
6609
6610 static u32
6611 intel_framebuffer_pitch_for_width(int width, int bpp)
6612 {
6613         u32 pitch = DIV_ROUND_UP(width * bpp, 8);
6614         return ALIGN(pitch, 64);
6615 }
6616
6617 static u32
6618 intel_framebuffer_size_for_mode(struct drm_display_mode *mode, int bpp)
6619 {
6620         u32 pitch = intel_framebuffer_pitch_for_width(mode->hdisplay, bpp);
6621         return ALIGN(pitch * mode->vdisplay, PAGE_SIZE);
6622 }
6623
6624 static struct drm_framebuffer *
6625 intel_framebuffer_create_for_mode(struct drm_device *dev,
6626                                   struct drm_display_mode *mode,
6627                                   int depth, int bpp)
6628 {
6629         struct drm_i915_gem_object *obj;
6630         struct drm_mode_fb_cmd2 mode_cmd;
6631
6632         obj = i915_gem_alloc_object(dev,
6633                                     intel_framebuffer_size_for_mode(mode, bpp));
6634         if (obj == NULL)
6635                 return ERR_PTR(-ENOMEM);
6636
6637         mode_cmd.width = mode->hdisplay;
6638         mode_cmd.height = mode->vdisplay;
6639         mode_cmd.pitches[0] = intel_framebuffer_pitch_for_width(mode_cmd.width,
6640                                                                 bpp);
6641         mode_cmd.pixel_format = 0;
6642
6643         return intel_framebuffer_create(dev, &mode_cmd, obj);
6644 }
6645
6646 static struct drm_framebuffer *
6647 mode_fits_in_fbdev(struct drm_device *dev,
6648                    struct drm_display_mode *mode)
6649 {
6650         struct drm_i915_private *dev_priv = dev->dev_private;
6651         struct drm_i915_gem_object *obj;
6652         struct drm_framebuffer *fb;
6653
6654         if (dev_priv->fbdev == NULL)
6655                 return NULL;
6656
6657         obj = dev_priv->fbdev->ifb.obj;
6658         if (obj == NULL)
6659                 return NULL;
6660
6661         fb = &dev_priv->fbdev->ifb.base;
6662         if (fb->pitches[0] < intel_framebuffer_pitch_for_width(mode->hdisplay,
6663                                                                fb->bits_per_pixel))
6664                 return NULL;
6665
6666         if (obj->base.size < mode->vdisplay * fb->pitches[0])
6667                 return NULL;
6668
6669         return fb;
6670 }
6671
6672 bool intel_get_load_detect_pipe(struct intel_encoder *intel_encoder,
6673                                 struct drm_connector *connector,
6674                                 struct drm_display_mode *mode,
6675                                 struct intel_load_detect_pipe *old)
6676 {
6677         struct intel_crtc *intel_crtc;
6678         struct drm_crtc *possible_crtc;
6679         struct drm_encoder *encoder = &intel_encoder->base;
6680         struct drm_crtc *crtc = NULL;
6681         struct drm_device *dev = encoder->dev;
6682         struct drm_framebuffer *old_fb;
6683         int i = -1;
6684
6685         DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
6686                       connector->base.id, drm_get_connector_name(connector),
6687                       encoder->base.id, drm_get_encoder_name(encoder));
6688
6689         /*
6690          * Algorithm gets a little messy:
6691          *
6692          *   - if the connector already has an assigned crtc, use it (but make
6693          *     sure it's on first)
6694          *
6695          *   - try to find the first unused crtc that can drive this connector,
6696          *     and use that if we find one
6697          */
6698
6699         /* See if we already have a CRTC for this connector */
6700         if (encoder->crtc) {
6701                 crtc = encoder->crtc;
6702
6703                 intel_crtc = to_intel_crtc(crtc);
6704                 old->dpms_mode = intel_crtc->dpms_mode;
6705                 old->load_detect_temp = false;
6706
6707                 /* Make sure the crtc and connector are running */
6708                 if (intel_crtc->dpms_mode != DRM_MODE_DPMS_ON) {
6709                         struct drm_encoder_helper_funcs *encoder_funcs;
6710                         struct drm_crtc_helper_funcs *crtc_funcs;
6711
6712                         crtc_funcs = crtc->helper_private;
6713                         crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
6714
6715                         encoder_funcs = encoder->helper_private;
6716                         encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);
6717                 }
6718
6719                 return true;
6720         }
6721
6722         /* Find an unused one (if possible) */
6723         list_for_each_entry(possible_crtc, &dev->mode_config.crtc_list, head) {
6724                 i++;
6725                 if (!(encoder->possible_crtcs & (1 << i)))
6726                         continue;
6727                 if (!possible_crtc->enabled) {
6728                         crtc = possible_crtc;
6729                         break;
6730                 }
6731         }
6732
6733         /*
6734          * If we didn't find an unused CRTC, don't use any.
6735          */
6736         if (!crtc) {
6737                 DRM_DEBUG_KMS("no pipe available for load-detect\n");
6738                 return false;
6739         }
6740
6741         encoder->crtc = crtc;
6742         connector->encoder = encoder;
6743
6744         intel_crtc = to_intel_crtc(crtc);
6745         old->dpms_mode = intel_crtc->dpms_mode;
6746         old->load_detect_temp = true;
6747         old->release_fb = NULL;
6748
6749         if (!mode)
6750                 mode = &load_detect_mode;
6751
6752         old_fb = crtc->fb;
6753
6754         /* We need a framebuffer large enough to accommodate all accesses
6755          * that the plane may generate whilst we perform load detection.
6756          * We can not rely on the fbcon either being present (we get called
6757          * during its initialisation to detect all boot displays, or it may
6758          * not even exist) or that it is large enough to satisfy the
6759          * requested mode.
6760          */
6761         crtc->fb = mode_fits_in_fbdev(dev, mode);
6762         if (crtc->fb == NULL) {
6763                 DRM_DEBUG_KMS("creating tmp fb for load-detection\n");
6764                 crtc->fb = intel_framebuffer_create_for_mode(dev, mode, 24, 32);
6765                 old->release_fb = crtc->fb;
6766         } else
6767                 DRM_DEBUG_KMS("reusing fbdev for load-detection framebuffer\n");
6768         if (IS_ERR(crtc->fb)) {
6769                 DRM_DEBUG_KMS("failed to allocate framebuffer for load-detection\n");
6770                 crtc->fb = old_fb;
6771                 return false;
6772         }
6773
6774         if (!drm_crtc_helper_set_mode(crtc, mode, 0, 0, old_fb)) {
6775                 DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n");
6776                 if (old->release_fb)
6777                         old->release_fb->funcs->destroy(old->release_fb);
6778                 crtc->fb = old_fb;
6779                 return false;
6780         }
6781
6782         /* let the connector get through one full cycle before testing */
6783         intel_wait_for_vblank(dev, intel_crtc->pipe);
6784
6785         return true;
6786 }
6787
6788 void intel_release_load_detect_pipe(struct intel_encoder *intel_encoder,
6789                                     struct drm_connector *connector,
6790                                     struct intel_load_detect_pipe *old)
6791 {
6792         struct drm_encoder *encoder = &intel_encoder->base;
6793         struct drm_device *dev = encoder->dev;
6794         struct drm_crtc *crtc = encoder->crtc;
6795         struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
6796         struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
6797
6798         DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
6799                       connector->base.id, drm_get_connector_name(connector),
6800                       encoder->base.id, drm_get_encoder_name(encoder));
6801
6802         if (old->load_detect_temp) {
6803                 connector->encoder = NULL;
6804                 drm_helper_disable_unused_functions(dev);
6805
6806                 if (old->release_fb)
6807                         old->release_fb->funcs->destroy(old->release_fb);
6808
6809                 return;
6810         }
6811
6812         /* Switch crtc and encoder back off if necessary */
6813         if (old->dpms_mode != DRM_MODE_DPMS_ON) {
6814                 encoder_funcs->dpms(encoder, old->dpms_mode);
6815                 crtc_funcs->dpms(crtc, old->dpms_mode);
6816         }
6817 }
6818
6819 /* Returns the clock of the currently programmed mode of the given pipe. */
6820 static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc)
6821 {
6822         struct drm_i915_private *dev_priv = dev->dev_private;
6823         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6824         int pipe = intel_crtc->pipe;
6825         u32 dpll = I915_READ(DPLL(pipe));
6826         u32 fp;
6827         intel_clock_t clock;
6828
6829         if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
6830                 fp = I915_READ(FP0(pipe));
6831         else
6832                 fp = I915_READ(FP1(pipe));
6833
6834         clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT;
6835         if (IS_PINEVIEW(dev)) {
6836                 clock.n = ffs((fp & FP_N_PINEVIEW_DIV_MASK) >> FP_N_DIV_SHIFT) - 1;
6837                 clock.m2 = (fp & FP_M2_PINEVIEW_DIV_MASK) >> FP_M2_DIV_SHIFT;
6838         } else {
6839                 clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT;
6840                 clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT;
6841         }
6842
6843         if (!IS_GEN2(dev)) {
6844                 if (IS_PINEVIEW(dev))
6845                         clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW) >>
6846                                 DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW);
6847                 else
6848                         clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK) >>
6849                                DPLL_FPA01_P1_POST_DIV_SHIFT);
6850
6851                 switch (dpll & DPLL_MODE_MASK) {
6852                 case DPLLB_MODE_DAC_SERIAL:
6853                         clock.p2 = dpll & DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 ?
6854                                 5 : 10;
6855                         break;
6856                 case DPLLB_MODE_LVDS:
6857                         clock.p2 = dpll & DPLLB_LVDS_P2_CLOCK_DIV_7 ?
6858                                 7 : 14;
6859                         break;
6860                 default:
6861                         DRM_DEBUG_KMS("Unknown DPLL mode %08x in programmed "
6862                                   "mode\n", (int)(dpll & DPLL_MODE_MASK));
6863                         return 0;
6864                 }
6865
6866                 /* XXX: Handle the 100Mhz refclk */
6867                 intel_clock(dev, 96000, &clock);
6868         } else {
6869                 bool is_lvds = (pipe == 1) && (I915_READ(LVDS) & LVDS_PORT_EN);
6870
6871                 if (is_lvds) {
6872                         clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >>
6873                                        DPLL_FPA01_P1_POST_DIV_SHIFT);
6874                         clock.p2 = 14;
6875
6876                         if ((dpll & PLL_REF_INPUT_MASK) ==
6877                             PLLB_REF_INPUT_SPREADSPECTRUMIN) {
6878                                 /* XXX: might not be 66MHz */
6879                                 intel_clock(dev, 66000, &clock);
6880                         } else
6881                                 intel_clock(dev, 48000, &clock);
6882                 } else {
6883                         if (dpll & PLL_P1_DIVIDE_BY_TWO)
6884                                 clock.p1 = 2;
6885                         else {
6886                                 clock.p1 = ((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830) >>
6887                                             DPLL_FPA01_P1_POST_DIV_SHIFT) + 2;
6888                         }
6889                         if (dpll & PLL_P2_DIVIDE_BY_4)
6890                                 clock.p2 = 4;
6891                         else
6892                                 clock.p2 = 2;
6893
6894                         intel_clock(dev, 48000, &clock);
6895                 }
6896         }
6897
6898         /* XXX: It would be nice to validate the clocks, but we can't reuse
6899          * i830PllIsValid() because it relies on the xf86_config connector
6900          * configuration being accurate, which it isn't necessarily.
6901          */
6902
6903         return clock.dot;
6904 }
6905
6906 /** Returns the currently programmed mode of the given pipe. */
6907 struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
6908                                              struct drm_crtc *crtc)
6909 {
6910         struct drm_i915_private *dev_priv = dev->dev_private;
6911         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6912         int pipe = intel_crtc->pipe;
6913         struct drm_display_mode *mode;
6914         int htot = I915_READ(HTOTAL(pipe));
6915         int hsync = I915_READ(HSYNC(pipe));
6916         int vtot = I915_READ(VTOTAL(pipe));
6917         int vsync = I915_READ(VSYNC(pipe));
6918
6919         mode = kzalloc(sizeof(*mode), GFP_KERNEL);
6920         if (!mode)
6921                 return NULL;
6922
6923         mode->clock = intel_crtc_clock_get(dev, crtc);
6924         mode->hdisplay = (htot & 0xffff) + 1;
6925         mode->htotal = ((htot & 0xffff0000) >> 16) + 1;
6926         mode->hsync_start = (hsync & 0xffff) + 1;
6927         mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1;
6928         mode->vdisplay = (vtot & 0xffff) + 1;
6929         mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1;
6930         mode->vsync_start = (vsync & 0xffff) + 1;
6931         mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1;
6932
6933         drm_mode_set_name(mode);
6934         drm_mode_set_crtcinfo(mode, 0);
6935
6936         return mode;
6937 }
6938
6939 #define GPU_IDLE_TIMEOUT 500 /* ms */
6940
6941 /* When this timer fires, we've been idle for awhile */
6942 static void intel_gpu_idle_timer(unsigned long arg)
6943 {
6944         struct drm_device *dev = (struct drm_device *)arg;
6945         drm_i915_private_t *dev_priv = dev->dev_private;
6946
6947         if (!list_empty(&dev_priv->mm.active_list)) {
6948                 /* Still processing requests, so just re-arm the timer. */
6949                 mod_timer(&dev_priv->idle_timer, jiffies +
6950                           msecs_to_jiffies(GPU_IDLE_TIMEOUT));
6951                 return;
6952         }
6953
6954         dev_priv->busy = false;
6955         queue_work(dev_priv->wq, &dev_priv->idle_work);
6956 }
6957
6958 #define CRTC_IDLE_TIMEOUT 1000 /* ms */
6959
6960 static void intel_crtc_idle_timer(unsigned long arg)
6961 {
6962         struct intel_crtc *intel_crtc = (struct intel_crtc *)arg;
6963         struct drm_crtc *crtc = &intel_crtc->base;
6964         drm_i915_private_t *dev_priv = crtc->dev->dev_private;
6965         struct intel_framebuffer *intel_fb;
6966
6967         intel_fb = to_intel_framebuffer(crtc->fb);
6968         if (intel_fb && intel_fb->obj->active) {
6969                 /* The framebuffer is still being accessed by the GPU. */
6970                 mod_timer(&intel_crtc->idle_timer, jiffies +
6971                           msecs_to_jiffies(CRTC_IDLE_TIMEOUT));
6972                 return;
6973         }
6974
6975         intel_crtc->busy = false;
6976         queue_work(dev_priv->wq, &dev_priv->idle_work);
6977 }
6978
6979 static void intel_increase_pllclock(struct drm_crtc *crtc)
6980 {
6981         struct drm_device *dev = crtc->dev;
6982         drm_i915_private_t *dev_priv = dev->dev_private;
6983         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6984         int pipe = intel_crtc->pipe;
6985         int dpll_reg = DPLL(pipe);
6986         int dpll;
6987
6988         if (HAS_PCH_SPLIT(dev))
6989                 return;
6990
6991         if (!dev_priv->lvds_downclock_avail)
6992                 return;
6993
6994         dpll = I915_READ(dpll_reg);
6995         if (!HAS_PIPE_CXSR(dev) && (dpll & DISPLAY_RATE_SELECT_FPA1)) {
6996                 DRM_DEBUG_DRIVER("upclocking LVDS\n");
6997
6998                 /* Unlock panel regs */
6999                 I915_WRITE(PP_CONTROL,
7000                            I915_READ(PP_CONTROL) | PANEL_UNLOCK_REGS);
7001
7002                 dpll &= ~DISPLAY_RATE_SELECT_FPA1;
7003                 I915_WRITE(dpll_reg, dpll);
7004                 intel_wait_for_vblank(dev, pipe);
7005
7006                 dpll = I915_READ(dpll_reg);
7007                 if (dpll & DISPLAY_RATE_SELECT_FPA1)
7008                         DRM_DEBUG_DRIVER("failed to upclock LVDS!\n");
7009
7010                 /* ...and lock them again */
7011                 I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) & 0x3);
7012         }
7013
7014         /* Schedule downclock */
7015         mod_timer(&intel_crtc->idle_timer, jiffies +
7016                   msecs_to_jiffies(CRTC_IDLE_TIMEOUT));
7017 }
7018
7019 static void intel_decrease_pllclock(struct drm_crtc *crtc)
7020 {
7021         struct drm_device *dev = crtc->dev;
7022         drm_i915_private_t *dev_priv = dev->dev_private;
7023         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7024         int pipe = intel_crtc->pipe;
7025         int dpll_reg = DPLL(pipe);
7026         int dpll = I915_READ(dpll_reg);
7027
7028         if (HAS_PCH_SPLIT(dev))
7029                 return;
7030
7031         if (!dev_priv->lvds_downclock_avail)
7032                 return;
7033
7034         /*
7035          * Since this is called by a timer, we should never get here in
7036          * the manual case.
7037          */
7038         if (!HAS_PIPE_CXSR(dev) && intel_crtc->lowfreq_avail) {
7039                 DRM_DEBUG_DRIVER("downclocking LVDS\n");
7040
7041                 /* Unlock panel regs */
7042                 I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) |
7043                            PANEL_UNLOCK_REGS);
7044
7045                 dpll |= DISPLAY_RATE_SELECT_FPA1;
7046                 I915_WRITE(dpll_reg, dpll);
7047                 intel_wait_for_vblank(dev, pipe);
7048                 dpll = I915_READ(dpll_reg);
7049                 if (!(dpll & DISPLAY_RATE_SELECT_FPA1))
7050                         DRM_DEBUG_DRIVER("failed to downclock LVDS!\n");
7051
7052                 /* ...and lock them again */
7053                 I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) & 0x3);
7054         }
7055
7056 }
7057
7058 /**
7059  * intel_idle_update - adjust clocks for idleness
7060  * @work: work struct
7061  *
7062  * Either the GPU or display (or both) went idle.  Check the busy status
7063  * here and adjust the CRTC and GPU clocks as necessary.
7064  */
7065 static void intel_idle_update(struct work_struct *work)
7066 {
7067         drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
7068                                                     idle_work);
7069         struct drm_device *dev = dev_priv->dev;
7070         struct drm_crtc *crtc;
7071         struct intel_crtc *intel_crtc;
7072
7073         if (!i915_powersave)
7074                 return;
7075
7076         mutex_lock(&dev->struct_mutex);
7077
7078         i915_update_gfx_val(dev_priv);
7079
7080         list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
7081                 /* Skip inactive CRTCs */
7082                 if (!crtc->fb)
7083                         continue;
7084
7085                 intel_crtc = to_intel_crtc(crtc);
7086                 if (!intel_crtc->busy)
7087                         intel_decrease_pllclock(crtc);
7088         }
7089
7090
7091         mutex_unlock(&dev->struct_mutex);
7092 }
7093
7094 /**
7095  * intel_mark_busy - mark the GPU and possibly the display busy
7096  * @dev: drm device
7097  * @obj: object we're operating on
7098  *
7099  * Callers can use this function to indicate that the GPU is busy processing
7100  * commands.  If @obj matches one of the CRTC objects (i.e. it's a scanout
7101  * buffer), we'll also mark the display as busy, so we know to increase its
7102  * clock frequency.
7103  */
7104 void intel_mark_busy(struct drm_device *dev, struct drm_i915_gem_object *obj)
7105 {
7106         drm_i915_private_t *dev_priv = dev->dev_private;
7107         struct drm_crtc *crtc = NULL;
7108         struct intel_framebuffer *intel_fb;
7109         struct intel_crtc *intel_crtc;
7110
7111         if (!drm_core_check_feature(dev, DRIVER_MODESET))
7112                 return;
7113
7114         if (!dev_priv->busy)
7115                 dev_priv->busy = true;
7116         else
7117                 mod_timer(&dev_priv->idle_timer, jiffies +
7118                           msecs_to_jiffies(GPU_IDLE_TIMEOUT));
7119
7120         list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
7121                 if (!crtc->fb)
7122                         continue;
7123
7124                 intel_crtc = to_intel_crtc(crtc);
7125                 intel_fb = to_intel_framebuffer(crtc->fb);
7126                 if (intel_fb->obj == obj) {
7127                         if (!intel_crtc->busy) {
7128                                 /* Non-busy -> busy, upclock */
7129                                 intel_increase_pllclock(crtc);
7130                                 intel_crtc->busy = true;
7131                         } else {
7132                                 /* Busy -> busy, put off timer */
7133                                 mod_timer(&intel_crtc->idle_timer, jiffies +
7134                                           msecs_to_jiffies(CRTC_IDLE_TIMEOUT));
7135                         }
7136                 }
7137         }
7138 }
7139
7140 static void intel_crtc_destroy(struct drm_crtc *crtc)
7141 {
7142         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7143         struct drm_device *dev = crtc->dev;
7144         struct intel_unpin_work *work;
7145         unsigned long flags;
7146
7147         spin_lock_irqsave(&dev->event_lock, flags);
7148         work = intel_crtc->unpin_work;
7149         intel_crtc->unpin_work = NULL;
7150         spin_unlock_irqrestore(&dev->event_lock, flags);
7151
7152         if (work) {
7153                 cancel_work_sync(&work->work);
7154                 kfree(work);
7155         }
7156
7157         drm_crtc_cleanup(crtc);
7158
7159         kfree(intel_crtc);
7160 }
7161
7162 static void intel_unpin_work_fn(struct work_struct *__work)
7163 {
7164         struct intel_unpin_work *work =
7165                 container_of(__work, struct intel_unpin_work, work);
7166
7167         mutex_lock(&work->dev->struct_mutex);
7168         intel_unpin_fb_obj(work->old_fb_obj);
7169         drm_gem_object_unreference(&work->pending_flip_obj->base);
7170         drm_gem_object_unreference(&work->old_fb_obj->base);
7171
7172         intel_update_fbc(work->dev);
7173         mutex_unlock(&work->dev->struct_mutex);
7174         kfree(work);
7175 }
7176
7177 static void do_intel_finish_page_flip(struct drm_device *dev,
7178                                       struct drm_crtc *crtc)
7179 {
7180         drm_i915_private_t *dev_priv = dev->dev_private;
7181         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7182         struct intel_unpin_work *work;
7183         struct drm_i915_gem_object *obj;
7184         struct drm_pending_vblank_event *e;
7185         struct timeval tnow, tvbl;
7186         unsigned long flags;
7187
7188         /* Ignore early vblank irqs */
7189         if (intel_crtc == NULL)
7190                 return;
7191
7192         do_gettimeofday(&tnow);
7193
7194         spin_lock_irqsave(&dev->event_lock, flags);
7195         work = intel_crtc->unpin_work;
7196         if (work == NULL || !work->pending) {
7197                 spin_unlock_irqrestore(&dev->event_lock, flags);
7198                 return;
7199         }
7200
7201         intel_crtc->unpin_work = NULL;
7202
7203         if (work->event) {
7204                 e = work->event;
7205                 e->event.sequence = drm_vblank_count_and_time(dev, intel_crtc->pipe, &tvbl);
7206
7207                 /* Called before vblank count and timestamps have
7208                  * been updated for the vblank interval of flip
7209                  * completion? Need to increment vblank count and
7210                  * add one videorefresh duration to returned timestamp
7211                  * to account for this. We assume this happened if we
7212                  * get called over 0.9 frame durations after the last
7213                  * timestamped vblank.
7214                  *
7215                  * This calculation can not be used with vrefresh rates
7216                  * below 5Hz (10Hz to be on the safe side) without
7217                  * promoting to 64 integers.
7218                  */
7219                 if (10 * (timeval_to_ns(&tnow) - timeval_to_ns(&tvbl)) >
7220                     9 * crtc->framedur_ns) {
7221                         e->event.sequence++;
7222                         tvbl = ns_to_timeval(timeval_to_ns(&tvbl) +
7223                                              crtc->framedur_ns);
7224                 }
7225
7226                 e->event.tv_sec = tvbl.tv_sec;
7227                 e->event.tv_usec = tvbl.tv_usec;
7228
7229                 list_add_tail(&e->base.link,
7230                               &e->base.file_priv->event_list);
7231                 wake_up_interruptible(&e->base.file_priv->event_wait);
7232         }
7233
7234         drm_vblank_put(dev, intel_crtc->pipe);
7235
7236         spin_unlock_irqrestore(&dev->event_lock, flags);
7237
7238         obj = work->old_fb_obj;
7239
7240         atomic_clear_mask(1 << intel_crtc->plane,
7241                           &obj->pending_flip.counter);
7242         if (atomic_read(&obj->pending_flip) == 0)
7243                 wake_up(&dev_priv->pending_flip_queue);
7244
7245         schedule_work(&work->work);
7246
7247         trace_i915_flip_complete(intel_crtc->plane, work->pending_flip_obj);
7248 }
7249
7250 void intel_finish_page_flip(struct drm_device *dev, int pipe)
7251 {
7252         drm_i915_private_t *dev_priv = dev->dev_private;
7253         struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
7254
7255         do_intel_finish_page_flip(dev, crtc);
7256 }
7257
7258 void intel_finish_page_flip_plane(struct drm_device *dev, int plane)
7259 {
7260         drm_i915_private_t *dev_priv = dev->dev_private;
7261         struct drm_crtc *crtc = dev_priv->plane_to_crtc_mapping[plane];
7262
7263         do_intel_finish_page_flip(dev, crtc);
7264 }
7265
7266 void intel_prepare_page_flip(struct drm_device *dev, int plane)
7267 {
7268         drm_i915_private_t *dev_priv = dev->dev_private;
7269         struct intel_crtc *intel_crtc =
7270                 to_intel_crtc(dev_priv->plane_to_crtc_mapping[plane]);
7271         unsigned long flags;
7272
7273         spin_lock_irqsave(&dev->event_lock, flags);
7274         if (intel_crtc->unpin_work) {
7275                 if ((++intel_crtc->unpin_work->pending) > 1)
7276                         DRM_ERROR("Prepared flip multiple times\n");
7277         } else {
7278                 DRM_DEBUG_DRIVER("preparing flip with no unpin work?\n");
7279         }
7280         spin_unlock_irqrestore(&dev->event_lock, flags);
7281 }
7282
7283 static int intel_gen2_queue_flip(struct drm_device *dev,
7284                                  struct drm_crtc *crtc,
7285                                  struct drm_framebuffer *fb,
7286                                  struct drm_i915_gem_object *obj)
7287 {
7288         struct drm_i915_private *dev_priv = dev->dev_private;
7289         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7290         unsigned long offset;
7291         u32 flip_mask;
7292         int ret;
7293
7294         ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv));
7295         if (ret)
7296                 goto out;
7297
7298         /* Offset into the new buffer for cases of shared fbs between CRTCs */
7299         offset = crtc->y * fb->pitches[0] + crtc->x * fb->bits_per_pixel/8;
7300
7301         ret = BEGIN_LP_RING(6);
7302         if (ret)
7303                 goto out;
7304
7305         /* Can't queue multiple flips, so wait for the previous
7306          * one to finish before executing the next.
7307          */
7308         if (intel_crtc->plane)
7309                 flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
7310         else
7311                 flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
7312         OUT_RING(MI_WAIT_FOR_EVENT | flip_mask);
7313         OUT_RING(MI_NOOP);
7314         OUT_RING(MI_DISPLAY_FLIP |
7315                  MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
7316         OUT_RING(fb->pitches[0]);
7317         OUT_RING(obj->gtt_offset + offset);
7318         OUT_RING(0); /* aux display base address, unused */
7319         ADVANCE_LP_RING();
7320 out:
7321         return ret;
7322 }
7323
7324 static int intel_gen3_queue_flip(struct drm_device *dev,
7325                                  struct drm_crtc *crtc,
7326                                  struct drm_framebuffer *fb,
7327                                  struct drm_i915_gem_object *obj)
7328 {
7329         struct drm_i915_private *dev_priv = dev->dev_private;
7330         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7331         unsigned long offset;
7332         u32 flip_mask;
7333         int ret;
7334
7335         ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv));
7336         if (ret)
7337                 goto out;
7338
7339         /* Offset into the new buffer for cases of shared fbs between CRTCs */
7340         offset = crtc->y * fb->pitches[0] + crtc->x * fb->bits_per_pixel/8;
7341
7342         ret = BEGIN_LP_RING(6);
7343         if (ret)
7344                 goto out;
7345
7346         if (intel_crtc->plane)
7347                 flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
7348         else
7349                 flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
7350         OUT_RING(MI_WAIT_FOR_EVENT | flip_mask);
7351         OUT_RING(MI_NOOP);
7352         OUT_RING(MI_DISPLAY_FLIP_I915 |
7353                  MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
7354         OUT_RING(fb->pitches[0]);
7355         OUT_RING(obj->gtt_offset + offset);
7356         OUT_RING(MI_NOOP);
7357
7358         ADVANCE_LP_RING();
7359 out:
7360         return ret;
7361 }
7362
7363 static int intel_gen4_queue_flip(struct drm_device *dev,
7364                                  struct drm_crtc *crtc,
7365                                  struct drm_framebuffer *fb,
7366                                  struct drm_i915_gem_object *obj)
7367 {
7368         struct drm_i915_private *dev_priv = dev->dev_private;
7369         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7370         uint32_t pf, pipesrc;
7371         int ret;
7372
7373         ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv));
7374         if (ret)
7375                 goto out;
7376
7377         ret = BEGIN_LP_RING(4);
7378         if (ret)
7379                 goto out;
7380
7381         /* i965+ uses the linear or tiled offsets from the
7382          * Display Registers (which do not change across a page-flip)
7383          * so we need only reprogram the base address.
7384          */
7385         OUT_RING(MI_DISPLAY_FLIP |
7386                  MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
7387         OUT_RING(fb->pitches[0]);
7388         OUT_RING(obj->gtt_offset | obj->tiling_mode);
7389
7390         /* XXX Enabling the panel-fitter across page-flip is so far
7391          * untested on non-native modes, so ignore it for now.
7392          * pf = I915_READ(pipe == 0 ? PFA_CTL_1 : PFB_CTL_1) & PF_ENABLE;
7393          */
7394         pf = 0;
7395         pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
7396         OUT_RING(pf | pipesrc);
7397         ADVANCE_LP_RING();
7398 out:
7399         return ret;
7400 }
7401
7402 static int intel_gen6_queue_flip(struct drm_device *dev,
7403                                  struct drm_crtc *crtc,
7404                                  struct drm_framebuffer *fb,
7405                                  struct drm_i915_gem_object *obj)
7406 {
7407         struct drm_i915_private *dev_priv = dev->dev_private;
7408         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7409         uint32_t pf, pipesrc;
7410         int ret;
7411
7412         ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv));
7413         if (ret)
7414                 goto out;
7415
7416         ret = BEGIN_LP_RING(4);
7417         if (ret)
7418                 goto out;
7419
7420         OUT_RING(MI_DISPLAY_FLIP |
7421                  MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
7422         OUT_RING(fb->pitches[0] | obj->tiling_mode);
7423         OUT_RING(obj->gtt_offset);
7424
7425         pf = I915_READ(PF_CTL(intel_crtc->pipe)) & PF_ENABLE;
7426         pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
7427         OUT_RING(pf | pipesrc);
7428         ADVANCE_LP_RING();
7429 out:
7430         return ret;
7431 }
7432
7433 /*
7434  * On gen7 we currently use the blit ring because (in early silicon at least)
7435  * the render ring doesn't give us interrpts for page flip completion, which
7436  * means clients will hang after the first flip is queued.  Fortunately the
7437  * blit ring generates interrupts properly, so use it instead.
7438  */
7439 static int intel_gen7_queue_flip(struct drm_device *dev,
7440                                  struct drm_crtc *crtc,
7441                                  struct drm_framebuffer *fb,
7442                                  struct drm_i915_gem_object *obj)
7443 {
7444         struct drm_i915_private *dev_priv = dev->dev_private;
7445         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7446         struct intel_ring_buffer *ring = &dev_priv->ring[BCS];
7447         int ret;
7448
7449         ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
7450         if (ret)
7451                 goto out;
7452
7453         ret = intel_ring_begin(ring, 4);
7454         if (ret)
7455                 goto out;
7456
7457         intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 | (intel_crtc->plane << 19));
7458         intel_ring_emit(ring, (fb->pitches[0] | obj->tiling_mode));
7459         intel_ring_emit(ring, (obj->gtt_offset));
7460         intel_ring_emit(ring, (MI_NOOP));
7461         intel_ring_advance(ring);
7462 out:
7463         return ret;
7464 }
7465
7466 static int intel_default_queue_flip(struct drm_device *dev,
7467                                     struct drm_crtc *crtc,
7468                                     struct drm_framebuffer *fb,
7469                                     struct drm_i915_gem_object *obj)
7470 {
7471         return -ENODEV;
7472 }
7473
7474 static int intel_crtc_page_flip(struct drm_crtc *crtc,
7475                                 struct drm_framebuffer *fb,
7476                                 struct drm_pending_vblank_event *event)
7477 {
7478         struct drm_device *dev = crtc->dev;
7479         struct drm_i915_private *dev_priv = dev->dev_private;
7480         struct intel_framebuffer *intel_fb;
7481         struct drm_i915_gem_object *obj;
7482         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7483         struct intel_unpin_work *work;
7484         unsigned long flags;
7485         int ret;
7486
7487         work = kzalloc(sizeof *work, GFP_KERNEL);
7488         if (work == NULL)
7489                 return -ENOMEM;
7490
7491         work->event = event;
7492         work->dev = crtc->dev;
7493         intel_fb = to_intel_framebuffer(crtc->fb);
7494         work->old_fb_obj = intel_fb->obj;
7495         INIT_WORK(&work->work, intel_unpin_work_fn);
7496
7497         ret = drm_vblank_get(dev, intel_crtc->pipe);
7498         if (ret)
7499                 goto free_work;
7500
7501         /* We borrow the event spin lock for protecting unpin_work */
7502         spin_lock_irqsave(&dev->event_lock, flags);
7503         if (intel_crtc->unpin_work) {
7504                 spin_unlock_irqrestore(&dev->event_lock, flags);
7505                 kfree(work);
7506                 drm_vblank_put(dev, intel_crtc->pipe);
7507
7508                 DRM_DEBUG_DRIVER("flip queue: crtc already busy\n");
7509                 return -EBUSY;
7510         }
7511         intel_crtc->unpin_work = work;
7512         spin_unlock_irqrestore(&dev->event_lock, flags);
7513
7514         intel_fb = to_intel_framebuffer(fb);
7515         obj = intel_fb->obj;
7516
7517         mutex_lock(&dev->struct_mutex);
7518
7519         /* Reference the objects for the scheduled work. */
7520         drm_gem_object_reference(&work->old_fb_obj->base);
7521         drm_gem_object_reference(&obj->base);
7522
7523         crtc->fb = fb;
7524
7525         work->pending_flip_obj = obj;
7526
7527         work->enable_stall_check = true;
7528
7529         /* Block clients from rendering to the new back buffer until
7530          * the flip occurs and the object is no longer visible.
7531          */
7532         atomic_add(1 << intel_crtc->plane, &work->old_fb_obj->pending_flip);
7533
7534         ret = dev_priv->display.queue_flip(dev, crtc, fb, obj);
7535         if (ret)
7536                 goto cleanup_pending;
7537
7538         intel_disable_fbc(dev);
7539         mutex_unlock(&dev->struct_mutex);
7540
7541         trace_i915_flip_request(intel_crtc->plane, obj);
7542
7543         return 0;
7544
7545 cleanup_pending:
7546         atomic_sub(1 << intel_crtc->plane, &work->old_fb_obj->pending_flip);
7547         drm_gem_object_unreference(&work->old_fb_obj->base);
7548         drm_gem_object_unreference(&obj->base);
7549         mutex_unlock(&dev->struct_mutex);
7550
7551         spin_lock_irqsave(&dev->event_lock, flags);
7552         intel_crtc->unpin_work = NULL;
7553         spin_unlock_irqrestore(&dev->event_lock, flags);
7554
7555         drm_vblank_put(dev, intel_crtc->pipe);
7556 free_work:
7557         kfree(work);
7558
7559         return ret;
7560 }
7561
7562 static void intel_sanitize_modesetting(struct drm_device *dev,
7563                                        int pipe, int plane)
7564 {
7565         struct drm_i915_private *dev_priv = dev->dev_private;
7566         u32 reg, val;
7567
7568         if (HAS_PCH_SPLIT(dev))
7569                 return;
7570
7571         /* Who knows what state these registers were left in by the BIOS or
7572          * grub?
7573          *
7574          * If we leave the registers in a conflicting state (e.g. with the
7575          * display plane reading from the other pipe than the one we intend
7576          * to use) then when we attempt to teardown the active mode, we will
7577          * not disable the pipes and planes in the correct order -- leaving
7578          * a plane reading from a disabled pipe and possibly leading to
7579          * undefined behaviour.
7580          */
7581
7582         reg = DSPCNTR(plane);
7583         val = I915_READ(reg);
7584
7585         if ((val & DISPLAY_PLANE_ENABLE) == 0)
7586                 return;
7587         if (!!(val & DISPPLANE_SEL_PIPE_MASK) == pipe)
7588                 return;
7589
7590         /* This display plane is active and attached to the other CPU pipe. */
7591         pipe = !pipe;
7592
7593         /* Disable the plane and wait for it to stop reading from the pipe. */
7594         intel_disable_plane(dev_priv, plane, pipe);
7595         intel_disable_pipe(dev_priv, pipe);
7596 }
7597
7598 static void intel_crtc_reset(struct drm_crtc *crtc)
7599 {
7600         struct drm_device *dev = crtc->dev;
7601         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7602
7603         /* Reset flags back to the 'unknown' status so that they
7604          * will be correctly set on the initial modeset.
7605          */
7606         intel_crtc->dpms_mode = -1;
7607
7608         /* We need to fix up any BIOS configuration that conflicts with
7609          * our expectations.
7610          */
7611         intel_sanitize_modesetting(dev, intel_crtc->pipe, intel_crtc->plane);
7612 }
7613
7614 static struct drm_crtc_helper_funcs intel_helper_funcs = {
7615         .dpms = intel_crtc_dpms,
7616         .mode_fixup = intel_crtc_mode_fixup,
7617         .mode_set = intel_crtc_mode_set,
7618         .mode_set_base = intel_pipe_set_base,
7619         .mode_set_base_atomic = intel_pipe_set_base_atomic,
7620         .load_lut = intel_crtc_load_lut,
7621         .disable = intel_crtc_disable,
7622 };
7623
7624 static const struct drm_crtc_funcs intel_crtc_funcs = {
7625         .reset = intel_crtc_reset,
7626         .cursor_set = intel_crtc_cursor_set,
7627         .cursor_move = intel_crtc_cursor_move,
7628         .gamma_set = intel_crtc_gamma_set,
7629         .set_config = drm_crtc_helper_set_config,
7630         .destroy = intel_crtc_destroy,
7631         .page_flip = intel_crtc_page_flip,
7632 };
7633
7634 static void intel_crtc_init(struct drm_device *dev, int pipe)
7635 {
7636         drm_i915_private_t *dev_priv = dev->dev_private;
7637         struct intel_crtc *intel_crtc;
7638         int i;
7639
7640         intel_crtc = kzalloc(sizeof(struct intel_crtc) + (INTELFB_CONN_LIMIT * sizeof(struct drm_connector *)), GFP_KERNEL);
7641         if (intel_crtc == NULL)
7642                 return;
7643
7644         drm_crtc_init(dev, &intel_crtc->base, &intel_crtc_funcs);
7645
7646         drm_mode_crtc_set_gamma_size(&intel_crtc->base, 256);
7647         for (i = 0; i < 256; i++) {
7648                 intel_crtc->lut_r[i] = i;
7649                 intel_crtc->lut_g[i] = i;
7650                 intel_crtc->lut_b[i] = i;
7651         }
7652
7653         /* Swap pipes & planes for FBC on pre-965 */
7654         intel_crtc->pipe = pipe;
7655         intel_crtc->plane = pipe;
7656         if (IS_MOBILE(dev) && IS_GEN3(dev)) {
7657                 DRM_DEBUG_KMS("swapping pipes & planes for FBC\n");
7658                 intel_crtc->plane = !pipe;
7659         }
7660
7661         BUG_ON(pipe >= ARRAY_SIZE(dev_priv->plane_to_crtc_mapping) ||
7662                dev_priv->plane_to_crtc_mapping[intel_crtc->plane] != NULL);
7663         dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base;
7664         dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base;
7665
7666         intel_crtc_reset(&intel_crtc->base);
7667         intel_crtc->active = true; /* force the pipe off on setup_init_config */
7668         intel_crtc->bpp = 24; /* default for pre-Ironlake */
7669
7670         if (HAS_PCH_SPLIT(dev)) {
7671                 if (pipe == 2 && IS_IVYBRIDGE(dev))
7672                         intel_crtc->no_pll = true;
7673                 intel_helper_funcs.prepare = ironlake_crtc_prepare;
7674                 intel_helper_funcs.commit = ironlake_crtc_commit;
7675         } else {
7676                 intel_helper_funcs.prepare = i9xx_crtc_prepare;
7677                 intel_helper_funcs.commit = i9xx_crtc_commit;
7678         }
7679
7680         drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs);
7681
7682         intel_crtc->busy = false;
7683
7684         setup_timer(&intel_crtc->idle_timer, intel_crtc_idle_timer,
7685                     (unsigned long)intel_crtc);
7686 }
7687
7688 int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
7689                                 struct drm_file *file)
7690 {
7691         drm_i915_private_t *dev_priv = dev->dev_private;
7692         struct drm_i915_get_pipe_from_crtc_id *pipe_from_crtc_id = data;
7693         struct drm_mode_object *drmmode_obj;
7694         struct intel_crtc *crtc;
7695
7696         if (!dev_priv) {
7697                 DRM_ERROR("called with no initialization\n");
7698                 return -EINVAL;
7699         }
7700
7701         drmmode_obj = drm_mode_object_find(dev, pipe_from_crtc_id->crtc_id,
7702                         DRM_MODE_OBJECT_CRTC);
7703
7704         if (!drmmode_obj) {
7705                 DRM_ERROR("no such CRTC id\n");
7706                 return -EINVAL;
7707         }
7708
7709         crtc = to_intel_crtc(obj_to_crtc(drmmode_obj));
7710         pipe_from_crtc_id->pipe = crtc->pipe;
7711
7712         return 0;
7713 }
7714
7715 static int intel_encoder_clones(struct drm_device *dev, int type_mask)
7716 {
7717         struct intel_encoder *encoder;
7718         int index_mask = 0;
7719         int entry = 0;
7720
7721         list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) {
7722                 if (type_mask & encoder->clone_mask)
7723                         index_mask |= (1 << entry);
7724                 entry++;
7725         }
7726
7727         return index_mask;
7728 }
7729
7730 static bool has_edp_a(struct drm_device *dev)
7731 {
7732         struct drm_i915_private *dev_priv = dev->dev_private;
7733
7734         if (!IS_MOBILE(dev))
7735                 return false;
7736
7737         if ((I915_READ(DP_A) & DP_DETECTED) == 0)
7738                 return false;
7739
7740         if (IS_GEN5(dev) &&
7741             (I915_READ(ILK_DISPLAY_CHICKEN_FUSES) & ILK_eDP_A_DISABLE))
7742                 return false;
7743
7744         return true;
7745 }
7746
7747 static void intel_setup_outputs(struct drm_device *dev)
7748 {
7749         struct drm_i915_private *dev_priv = dev->dev_private;
7750         struct intel_encoder *encoder;
7751         bool dpd_is_edp = false;
7752         bool has_lvds = false;
7753
7754         if (IS_MOBILE(dev) && !IS_I830(dev))
7755                 has_lvds = intel_lvds_init(dev);
7756         if (!has_lvds && !HAS_PCH_SPLIT(dev)) {
7757                 /* disable the panel fitter on everything but LVDS */
7758                 I915_WRITE(PFIT_CONTROL, 0);
7759         }
7760
7761         if (HAS_PCH_SPLIT(dev)) {
7762                 dpd_is_edp = intel_dpd_is_edp(dev);
7763
7764                 if (has_edp_a(dev))
7765                         intel_dp_init(dev, DP_A);
7766
7767                 if (dpd_is_edp && (I915_READ(PCH_DP_D) & DP_DETECTED))
7768                         intel_dp_init(dev, PCH_DP_D);
7769         }
7770
7771         intel_crt_init(dev);
7772
7773         if (HAS_PCH_SPLIT(dev)) {
7774                 int found;
7775
7776                 if (I915_READ(HDMIB) & PORT_DETECTED) {
7777                         /* PCH SDVOB multiplex with HDMIB */
7778                         found = intel_sdvo_init(dev, PCH_SDVOB);
7779                         if (!found)
7780                                 intel_hdmi_init(dev, HDMIB);
7781                         if (!found && (I915_READ(PCH_DP_B) & DP_DETECTED))
7782                                 intel_dp_init(dev, PCH_DP_B);
7783                 }
7784
7785                 if (I915_READ(HDMIC) & PORT_DETECTED)
7786                         intel_hdmi_init(dev, HDMIC);
7787
7788                 if (I915_READ(HDMID) & PORT_DETECTED)
7789                         intel_hdmi_init(dev, HDMID);
7790
7791                 if (I915_READ(PCH_DP_C) & DP_DETECTED)
7792                         intel_dp_init(dev, PCH_DP_C);
7793
7794                 if (!dpd_is_edp && (I915_READ(PCH_DP_D) & DP_DETECTED))
7795                         intel_dp_init(dev, PCH_DP_D);
7796
7797         } else if (SUPPORTS_DIGITAL_OUTPUTS(dev)) {
7798                 bool found = false;
7799
7800                 if (I915_READ(SDVOB) & SDVO_DETECTED) {
7801                         DRM_DEBUG_KMS("probing SDVOB\n");
7802                         found = intel_sdvo_init(dev, SDVOB);
7803                         if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) {
7804                                 DRM_DEBUG_KMS("probing HDMI on SDVOB\n");
7805                                 intel_hdmi_init(dev, SDVOB);
7806                         }
7807
7808                         if (!found && SUPPORTS_INTEGRATED_DP(dev)) {
7809                                 DRM_DEBUG_KMS("probing DP_B\n");
7810                                 intel_dp_init(dev, DP_B);
7811                         }
7812                 }
7813
7814                 /* Before G4X SDVOC doesn't have its own detect register */
7815
7816                 if (I915_READ(SDVOB) & SDVO_DETECTED) {
7817                         DRM_DEBUG_KMS("probing SDVOC\n");
7818                         found = intel_sdvo_init(dev, SDVOC);
7819                 }
7820
7821                 if (!found && (I915_READ(SDVOC) & SDVO_DETECTED)) {
7822
7823                         if (SUPPORTS_INTEGRATED_HDMI(dev)) {
7824                                 DRM_DEBUG_KMS("probing HDMI on SDVOC\n");
7825                                 intel_hdmi_init(dev, SDVOC);
7826                         }
7827                         if (SUPPORTS_INTEGRATED_DP(dev)) {
7828                                 DRM_DEBUG_KMS("probing DP_C\n");
7829                                 intel_dp_init(dev, DP_C);
7830                         }
7831                 }
7832
7833                 if (SUPPORTS_INTEGRATED_DP(dev) &&
7834                     (I915_READ(DP_D) & DP_DETECTED)) {
7835                         DRM_DEBUG_KMS("probing DP_D\n");
7836                         intel_dp_init(dev, DP_D);
7837                 }
7838         } else if (IS_GEN2(dev))
7839                 intel_dvo_init(dev);
7840
7841         if (SUPPORTS_TV(dev))
7842                 intel_tv_init(dev);
7843
7844         list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) {
7845                 encoder->base.possible_crtcs = encoder->crtc_mask;
7846                 encoder->base.possible_clones =
7847                         intel_encoder_clones(dev, encoder->clone_mask);
7848         }
7849
7850         /* disable all the possible outputs/crtcs before entering KMS mode */
7851         drm_helper_disable_unused_functions(dev);
7852
7853         if (HAS_PCH_SPLIT(dev))
7854                 ironlake_init_pch_refclk(dev);
7855 }
7856
7857 static void intel_user_framebuffer_destroy(struct drm_framebuffer *fb)
7858 {
7859         struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
7860
7861         drm_framebuffer_cleanup(fb);
7862         drm_gem_object_unreference_unlocked(&intel_fb->obj->base);
7863
7864         kfree(intel_fb);
7865 }
7866
7867 static int intel_user_framebuffer_create_handle(struct drm_framebuffer *fb,
7868                                                 struct drm_file *file,
7869                                                 unsigned int *handle)
7870 {
7871         struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
7872         struct drm_i915_gem_object *obj = intel_fb->obj;
7873
7874         return drm_gem_handle_create(file, &obj->base, handle);
7875 }
7876
7877 static const struct drm_framebuffer_funcs intel_fb_funcs = {
7878         .destroy = intel_user_framebuffer_destroy,
7879         .create_handle = intel_user_framebuffer_create_handle,
7880 };
7881
7882 int intel_framebuffer_init(struct drm_device *dev,
7883                            struct intel_framebuffer *intel_fb,
7884                            struct drm_mode_fb_cmd2 *mode_cmd,
7885                            struct drm_i915_gem_object *obj)
7886 {
7887         int ret;
7888
7889         if (obj->tiling_mode == I915_TILING_Y)
7890                 return -EINVAL;
7891
7892         if (mode_cmd->pitches[0] & 63)
7893                 return -EINVAL;
7894
7895         switch (mode_cmd->pixel_format) {
7896         case DRM_FORMAT_RGB332:
7897         case DRM_FORMAT_RGB565:
7898         case DRM_FORMAT_XRGB8888:
7899         case DRM_FORMAT_ARGB8888:
7900         case DRM_FORMAT_XRGB2101010:
7901         case DRM_FORMAT_ARGB2101010:
7902                 /* RGB formats are common across chipsets */
7903                 break;
7904         case DRM_FORMAT_YUYV:
7905         case DRM_FORMAT_UYVY:
7906         case DRM_FORMAT_YVYU:
7907         case DRM_FORMAT_VYUY:
7908                 break;
7909         default:
7910                 DRM_DEBUG_KMS("unsupported pixel format %u\n",
7911                                 mode_cmd->pixel_format);
7912                 return -EINVAL;
7913         }
7914
7915         ret = drm_framebuffer_init(dev, &intel_fb->base, &intel_fb_funcs);
7916         if (ret) {
7917                 DRM_ERROR("framebuffer init failed %d\n", ret);
7918                 return ret;
7919         }
7920
7921         drm_helper_mode_fill_fb_struct(&intel_fb->base, mode_cmd);
7922         intel_fb->obj = obj;
7923         return 0;
7924 }
7925
7926 static struct drm_framebuffer *
7927 intel_user_framebuffer_create(struct drm_device *dev,
7928                               struct drm_file *filp,
7929                               struct drm_mode_fb_cmd2 *mode_cmd)
7930 {
7931         struct drm_i915_gem_object *obj;
7932
7933         obj = to_intel_bo(drm_gem_object_lookup(dev, filp,
7934                                                 mode_cmd->handles[0]));
7935         if (&obj->base == NULL)
7936                 return ERR_PTR(-ENOENT);
7937
7938         return intel_framebuffer_create(dev, mode_cmd, obj);
7939 }
7940
7941 static const struct drm_mode_config_funcs intel_mode_funcs = {
7942         .fb_create = intel_user_framebuffer_create,
7943         .output_poll_changed = intel_fb_output_poll_changed,
7944 };
7945
7946 static struct drm_i915_gem_object *
7947 intel_alloc_context_page(struct drm_device *dev)
7948 {
7949         struct drm_i915_gem_object *ctx;
7950         int ret;
7951
7952         WARN_ON(!mutex_is_locked(&dev->struct_mutex));
7953
7954         ctx = i915_gem_alloc_object(dev, 4096);
7955         if (!ctx) {
7956                 DRM_DEBUG("failed to alloc power context, RC6 disabled\n");
7957                 return NULL;
7958         }
7959
7960         ret = i915_gem_object_pin(ctx, 4096, true);
7961         if (ret) {
7962                 DRM_ERROR("failed to pin power context: %d\n", ret);
7963                 goto err_unref;
7964         }
7965
7966         ret = i915_gem_object_set_to_gtt_domain(ctx, 1);
7967         if (ret) {
7968                 DRM_ERROR("failed to set-domain on power context: %d\n", ret);
7969                 goto err_unpin;
7970         }
7971
7972         return ctx;
7973
7974 err_unpin:
7975         i915_gem_object_unpin(ctx);
7976 err_unref:
7977         drm_gem_object_unreference(&ctx->base);
7978         mutex_unlock(&dev->struct_mutex);
7979         return NULL;
7980 }
7981
7982 bool ironlake_set_drps(struct drm_device *dev, u8 val)
7983 {
7984         struct drm_i915_private *dev_priv = dev->dev_private;
7985         u16 rgvswctl;
7986
7987         rgvswctl = I915_READ16(MEMSWCTL);
7988         if (rgvswctl & MEMCTL_CMD_STS) {
7989                 DRM_DEBUG("gpu busy, RCS change rejected\n");
7990                 return false; /* still busy with another command */
7991         }
7992
7993         rgvswctl = (MEMCTL_CMD_CHFREQ << MEMCTL_CMD_SHIFT) |
7994                 (val << MEMCTL_FREQ_SHIFT) | MEMCTL_SFCAVM;
7995         I915_WRITE16(MEMSWCTL, rgvswctl);
7996         POSTING_READ16(MEMSWCTL);
7997
7998         rgvswctl |= MEMCTL_CMD_STS;
7999         I915_WRITE16(MEMSWCTL, rgvswctl);
8000
8001         return true;
8002 }
8003
8004 void ironlake_enable_drps(struct drm_device *dev)
8005 {
8006         struct drm_i915_private *dev_priv = dev->dev_private;
8007         u32 rgvmodectl = I915_READ(MEMMODECTL);
8008         u8 fmax, fmin, fstart, vstart;
8009
8010         /* Enable temp reporting */
8011         I915_WRITE16(PMMISC, I915_READ(PMMISC) | MCPPCE_EN);
8012         I915_WRITE16(TSC1, I915_READ(TSC1) | TSE);
8013
8014         /* 100ms RC evaluation intervals */
8015         I915_WRITE(RCUPEI, 100000);
8016         I915_WRITE(RCDNEI, 100000);
8017
8018         /* Set max/min thresholds to 90ms and 80ms respectively */
8019         I915_WRITE(RCBMAXAVG, 90000);
8020         I915_WRITE(RCBMINAVG, 80000);
8021
8022         I915_WRITE(MEMIHYST, 1);
8023
8024         /* Set up min, max, and cur for interrupt handling */
8025         fmax = (rgvmodectl & MEMMODE_FMAX_MASK) >> MEMMODE_FMAX_SHIFT;
8026         fmin = (rgvmodectl & MEMMODE_FMIN_MASK);
8027         fstart = (rgvmodectl & MEMMODE_FSTART_MASK) >>
8028                 MEMMODE_FSTART_SHIFT;
8029
8030         vstart = (I915_READ(PXVFREQ_BASE + (fstart * 4)) & PXVFREQ_PX_MASK) >>
8031                 PXVFREQ_PX_SHIFT;
8032
8033         dev_priv->fmax = fmax; /* IPS callback will increase this */
8034         dev_priv->fstart = fstart;
8035
8036         dev_priv->max_delay = fstart;
8037         dev_priv->min_delay = fmin;
8038         dev_priv->cur_delay = fstart;
8039
8040         DRM_DEBUG_DRIVER("fmax: %d, fmin: %d, fstart: %d\n",
8041                          fmax, fmin, fstart);
8042
8043         I915_WRITE(MEMINTREN, MEMINT_CX_SUPR_EN | MEMINT_EVAL_CHG_EN);
8044
8045         /*
8046          * Interrupts will be enabled in ironlake_irq_postinstall
8047          */
8048
8049         I915_WRITE(VIDSTART, vstart);
8050         POSTING_READ(VIDSTART);
8051
8052         rgvmodectl |= MEMMODE_SWMODE_EN;
8053         I915_WRITE(MEMMODECTL, rgvmodectl);
8054
8055         if (wait_for((I915_READ(MEMSWCTL) & MEMCTL_CMD_STS) == 0, 10))
8056                 DRM_ERROR("stuck trying to change perf mode\n");
8057         msleep(1);
8058
8059         ironlake_set_drps(dev, fstart);
8060
8061         dev_priv->last_count1 = I915_READ(0x112e4) + I915_READ(0x112e8) +
8062                 I915_READ(0x112e0);
8063         dev_priv->last_time1 = jiffies_to_msecs(jiffies);
8064         dev_priv->last_count2 = I915_READ(0x112f4);
8065         getrawmonotonic(&dev_priv->last_time2);
8066 }
8067
8068 void ironlake_disable_drps(struct drm_device *dev)
8069 {
8070         struct drm_i915_private *dev_priv = dev->dev_private;
8071         u16 rgvswctl = I915_READ16(MEMSWCTL);
8072
8073         /* Ack interrupts, disable EFC interrupt */
8074         I915_WRITE(MEMINTREN, I915_READ(MEMINTREN) & ~MEMINT_EVAL_CHG_EN);
8075         I915_WRITE(MEMINTRSTS, MEMINT_EVAL_CHG);
8076         I915_WRITE(DEIER, I915_READ(DEIER) & ~DE_PCU_EVENT);
8077         I915_WRITE(DEIIR, DE_PCU_EVENT);
8078         I915_WRITE(DEIMR, I915_READ(DEIMR) | DE_PCU_EVENT);
8079
8080         /* Go back to the starting frequency */
8081         ironlake_set_drps(dev, dev_priv->fstart);
8082         msleep(1);
8083         rgvswctl |= MEMCTL_CMD_STS;
8084         I915_WRITE(MEMSWCTL, rgvswctl);
8085         msleep(1);
8086
8087 }
8088
8089 void gen6_set_rps(struct drm_device *dev, u8 val)
8090 {
8091         struct drm_i915_private *dev_priv = dev->dev_private;
8092         u32 swreq;
8093
8094         swreq = (val & 0x3ff) << 25;
8095         I915_WRITE(GEN6_RPNSWREQ, swreq);
8096 }
8097
8098 void gen6_disable_rps(struct drm_device *dev)
8099 {
8100         struct drm_i915_private *dev_priv = dev->dev_private;
8101
8102         I915_WRITE(GEN6_RPNSWREQ, 1 << 31);
8103         I915_WRITE(GEN6_PMINTRMSK, 0xffffffff);
8104         I915_WRITE(GEN6_PMIER, 0);
8105         /* Complete PM interrupt masking here doesn't race with the rps work
8106          * item again unmasking PM interrupts because that is using a different
8107          * register (PMIMR) to mask PM interrupts. The only risk is in leaving
8108          * stale bits in PMIIR and PMIMR which gen6_enable_rps will clean up. */
8109
8110         spin_lock_irq(&dev_priv->rps_lock);
8111         dev_priv->pm_iir = 0;
8112         spin_unlock_irq(&dev_priv->rps_lock);
8113
8114         I915_WRITE(GEN6_PMIIR, I915_READ(GEN6_PMIIR));
8115 }
8116
8117 static unsigned long intel_pxfreq(u32 vidfreq)
8118 {
8119         unsigned long freq;
8120         int div = (vidfreq & 0x3f0000) >> 16;
8121         int post = (vidfreq & 0x3000) >> 12;
8122         int pre = (vidfreq & 0x7);
8123
8124         if (!pre)
8125                 return 0;
8126
8127         freq = ((div * 133333) / ((1<<post) * pre));
8128
8129         return freq;
8130 }
8131
8132 void intel_init_emon(struct drm_device *dev)
8133 {
8134         struct drm_i915_private *dev_priv = dev->dev_private;
8135         u32 lcfuse;
8136         u8 pxw[16];
8137         int i;
8138
8139         /* Disable to program */
8140         I915_WRITE(ECR, 0);
8141         POSTING_READ(ECR);
8142
8143         /* Program energy weights for various events */
8144         I915_WRITE(SDEW, 0x15040d00);
8145         I915_WRITE(CSIEW0, 0x007f0000);
8146         I915_WRITE(CSIEW1, 0x1e220004);
8147         I915_WRITE(CSIEW2, 0x04000004);
8148
8149         for (i = 0; i < 5; i++)
8150                 I915_WRITE(PEW + (i * 4), 0);
8151         for (i = 0; i < 3; i++)
8152                 I915_WRITE(DEW + (i * 4), 0);
8153
8154         /* Program P-state weights to account for frequency power adjustment */
8155         for (i = 0; i < 16; i++) {
8156                 u32 pxvidfreq = I915_READ(PXVFREQ_BASE + (i * 4));
8157                 unsigned long freq = intel_pxfreq(pxvidfreq);
8158                 unsigned long vid = (pxvidfreq & PXVFREQ_PX_MASK) >>
8159                         PXVFREQ_PX_SHIFT;
8160                 unsigned long val;
8161
8162                 val = vid * vid;
8163                 val *= (freq / 1000);
8164                 val *= 255;
8165                 val /= (127*127*900);
8166                 if (val > 0xff)
8167                         DRM_ERROR("bad pxval: %ld\n", val);
8168                 pxw[i] = val;
8169         }
8170         /* Render standby states get 0 weight */
8171         pxw[14] = 0;
8172         pxw[15] = 0;
8173
8174         for (i = 0; i < 4; i++) {
8175                 u32 val = (pxw[i*4] << 24) | (pxw[(i*4)+1] << 16) |
8176                         (pxw[(i*4)+2] << 8) | (pxw[(i*4)+3]);
8177                 I915_WRITE(PXW + (i * 4), val);
8178         }
8179
8180         /* Adjust magic regs to magic values (more experimental results) */
8181         I915_WRITE(OGW0, 0);
8182         I915_WRITE(OGW1, 0);
8183         I915_WRITE(EG0, 0x00007f00);
8184         I915_WRITE(EG1, 0x0000000e);
8185         I915_WRITE(EG2, 0x000e0000);
8186         I915_WRITE(EG3, 0x68000300);
8187         I915_WRITE(EG4, 0x42000000);
8188         I915_WRITE(EG5, 0x00140031);
8189         I915_WRITE(EG6, 0);
8190         I915_WRITE(EG7, 0);
8191
8192         for (i = 0; i < 8; i++)
8193                 I915_WRITE(PXWL + (i * 4), 0);
8194
8195         /* Enable PMON + select events */
8196         I915_WRITE(ECR, 0x80000019);
8197
8198         lcfuse = I915_READ(LCFUSE02);
8199
8200         dev_priv->corr = (lcfuse & LCFUSE_HIV_MASK);
8201 }
8202
8203 static bool intel_enable_rc6(struct drm_device *dev)
8204 {
8205         /*
8206          * Respect the kernel parameter if it is set
8207          */
8208         if (i915_enable_rc6 >= 0)
8209                 return i915_enable_rc6;
8210
8211         /*
8212          * Disable RC6 on Ironlake
8213          */
8214         if (INTEL_INFO(dev)->gen == 5)
8215                 return 0;
8216
8217         /*
8218          * Disable rc6 on Sandybridge
8219          */
8220         if (INTEL_INFO(dev)->gen == 6) {
8221                 DRM_DEBUG_DRIVER("Sandybridge: RC6 disabled\n");
8222                 return 0;
8223         }
8224         DRM_DEBUG_DRIVER("RC6 enabled\n");
8225         return 1;
8226 }
8227
8228 void gen6_enable_rps(struct drm_i915_private *dev_priv)
8229 {
8230         u32 rp_state_cap = I915_READ(GEN6_RP_STATE_CAP);
8231         u32 gt_perf_status = I915_READ(GEN6_GT_PERF_STATUS);
8232         u32 pcu_mbox, rc6_mask = 0;
8233         int cur_freq, min_freq, max_freq;
8234         int i;
8235
8236         /* Here begins a magic sequence of register writes to enable
8237          * auto-downclocking.
8238          *
8239          * Perhaps there might be some value in exposing these to
8240          * userspace...
8241          */
8242         I915_WRITE(GEN6_RC_STATE, 0);
8243         mutex_lock(&dev_priv->dev->struct_mutex);
8244         gen6_gt_force_wake_get(dev_priv);
8245
8246         /* disable the counters and set deterministic thresholds */
8247         I915_WRITE(GEN6_RC_CONTROL, 0);
8248
8249         I915_WRITE(GEN6_RC1_WAKE_RATE_LIMIT, 1000 << 16);
8250         I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 40 << 16 | 30);
8251         I915_WRITE(GEN6_RC6pp_WAKE_RATE_LIMIT, 30);
8252         I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000);
8253         I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25);
8254
8255         for (i = 0; i < I915_NUM_RINGS; i++)
8256                 I915_WRITE(RING_MAX_IDLE(dev_priv->ring[i].mmio_base), 10);
8257
8258         I915_WRITE(GEN6_RC_SLEEP, 0);
8259         I915_WRITE(GEN6_RC1e_THRESHOLD, 1000);
8260         I915_WRITE(GEN6_RC6_THRESHOLD, 50000);
8261         I915_WRITE(GEN6_RC6p_THRESHOLD, 100000);
8262         I915_WRITE(GEN6_RC6pp_THRESHOLD, 64000); /* unused */
8263
8264         if (intel_enable_rc6(dev_priv->dev))
8265                 rc6_mask = GEN6_RC_CTL_RC6p_ENABLE |
8266                         GEN6_RC_CTL_RC6_ENABLE;
8267
8268         I915_WRITE(GEN6_RC_CONTROL,
8269                    rc6_mask |
8270                    GEN6_RC_CTL_EI_MODE(1) |
8271                    GEN6_RC_CTL_HW_ENABLE);
8272
8273         I915_WRITE(GEN6_RPNSWREQ,
8274                    GEN6_FREQUENCY(10) |
8275                    GEN6_OFFSET(0) |
8276                    GEN6_AGGRESSIVE_TURBO);
8277         I915_WRITE(GEN6_RC_VIDEO_FREQ,
8278                    GEN6_FREQUENCY(12));
8279
8280         I915_WRITE(GEN6_RP_DOWN_TIMEOUT, 1000000);
8281         I915_WRITE(GEN6_RP_INTERRUPT_LIMITS,
8282                    18 << 24 |
8283                    6 << 16);
8284         I915_WRITE(GEN6_RP_UP_THRESHOLD, 10000);
8285         I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 1000000);
8286         I915_WRITE(GEN6_RP_UP_EI, 100000);
8287         I915_WRITE(GEN6_RP_DOWN_EI, 5000000);
8288         I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 10);
8289         I915_WRITE(GEN6_RP_CONTROL,
8290                    GEN6_RP_MEDIA_TURBO |
8291                    GEN6_RP_MEDIA_HW_MODE |
8292                    GEN6_RP_MEDIA_IS_GFX |
8293                    GEN6_RP_ENABLE |
8294                    GEN6_RP_UP_BUSY_AVG |
8295                    GEN6_RP_DOWN_IDLE_CONT);
8296
8297         if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0,
8298                      500))
8299                 DRM_ERROR("timeout waiting for pcode mailbox to become idle\n");
8300
8301         I915_WRITE(GEN6_PCODE_DATA, 0);
8302         I915_WRITE(GEN6_PCODE_MAILBOX,
8303                    GEN6_PCODE_READY |
8304                    GEN6_PCODE_WRITE_MIN_FREQ_TABLE);
8305         if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0,
8306                      500))
8307                 DRM_ERROR("timeout waiting for pcode mailbox to finish\n");
8308
8309         min_freq = (rp_state_cap & 0xff0000) >> 16;
8310         max_freq = rp_state_cap & 0xff;
8311         cur_freq = (gt_perf_status & 0xff00) >> 8;
8312
8313         /* Check for overclock support */
8314         if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0,
8315                      500))
8316                 DRM_ERROR("timeout waiting for pcode mailbox to become idle\n");
8317         I915_WRITE(GEN6_PCODE_MAILBOX, GEN6_READ_OC_PARAMS);
8318         pcu_mbox = I915_READ(GEN6_PCODE_DATA);
8319         if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0,
8320                      500))
8321                 DRM_ERROR("timeout waiting for pcode mailbox to finish\n");
8322         if (pcu_mbox & (1<<31)) { /* OC supported */
8323                 max_freq = pcu_mbox & 0xff;
8324                 DRM_DEBUG_DRIVER("overclocking supported, adjusting frequency max to %dMHz\n", pcu_mbox * 50);
8325         }
8326
8327         /* In units of 100MHz */
8328         dev_priv->max_delay = max_freq;
8329         dev_priv->min_delay = min_freq;
8330         dev_priv->cur_delay = cur_freq;
8331
8332         /* requires MSI enabled */
8333         I915_WRITE(GEN6_PMIER,
8334                    GEN6_PM_MBOX_EVENT |
8335                    GEN6_PM_THERMAL_EVENT |
8336                    GEN6_PM_RP_DOWN_TIMEOUT |
8337                    GEN6_PM_RP_UP_THRESHOLD |
8338                    GEN6_PM_RP_DOWN_THRESHOLD |
8339                    GEN6_PM_RP_UP_EI_EXPIRED |
8340                    GEN6_PM_RP_DOWN_EI_EXPIRED);
8341         spin_lock_irq(&dev_priv->rps_lock);
8342         WARN_ON(dev_priv->pm_iir != 0);
8343         I915_WRITE(GEN6_PMIMR, 0);
8344         spin_unlock_irq(&dev_priv->rps_lock);
8345         /* enable all PM interrupts */
8346         I915_WRITE(GEN6_PMINTRMSK, 0);
8347
8348         gen6_gt_force_wake_put(dev_priv);
8349         mutex_unlock(&dev_priv->dev->struct_mutex);
8350 }
8351
8352 void gen6_update_ring_freq(struct drm_i915_private *dev_priv)
8353 {
8354         int min_freq = 15;
8355         int gpu_freq, ia_freq, max_ia_freq;
8356         int scaling_factor = 180;
8357
8358         max_ia_freq = cpufreq_quick_get_max(0);
8359         /*
8360          * Default to measured freq if none found, PCU will ensure we don't go
8361          * over
8362          */
8363         if (!max_ia_freq)
8364                 max_ia_freq = tsc_khz;
8365
8366         /* Convert from kHz to MHz */
8367         max_ia_freq /= 1000;
8368
8369         mutex_lock(&dev_priv->dev->struct_mutex);
8370
8371         /*
8372          * For each potential GPU frequency, load a ring frequency we'd like
8373          * to use for memory access.  We do this by specifying the IA frequency
8374          * the PCU should use as a reference to determine the ring frequency.
8375          */
8376         for (gpu_freq = dev_priv->max_delay; gpu_freq >= dev_priv->min_delay;
8377              gpu_freq--) {
8378                 int diff = dev_priv->max_delay - gpu_freq;
8379
8380                 /*
8381                  * For GPU frequencies less than 750MHz, just use the lowest
8382                  * ring freq.
8383                  */
8384                 if (gpu_freq < min_freq)
8385                         ia_freq = 800;
8386                 else
8387                         ia_freq = max_ia_freq - ((diff * scaling_factor) / 2);
8388                 ia_freq = DIV_ROUND_CLOSEST(ia_freq, 100);
8389
8390                 I915_WRITE(GEN6_PCODE_DATA,
8391                            (ia_freq << GEN6_PCODE_FREQ_IA_RATIO_SHIFT) |
8392                            gpu_freq);
8393                 I915_WRITE(GEN6_PCODE_MAILBOX, GEN6_PCODE_READY |
8394                            GEN6_PCODE_WRITE_MIN_FREQ_TABLE);
8395                 if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) &
8396                               GEN6_PCODE_READY) == 0, 10)) {
8397                         DRM_ERROR("pcode write of freq table timed out\n");
8398                         continue;
8399                 }
8400         }
8401
8402         mutex_unlock(&dev_priv->dev->struct_mutex);
8403 }
8404
8405 static void ironlake_init_clock_gating(struct drm_device *dev)
8406 {
8407         struct drm_i915_private *dev_priv = dev->dev_private;
8408         uint32_t dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE;
8409
8410         /* Required for FBC */
8411         dspclk_gate |= DPFCUNIT_CLOCK_GATE_DISABLE |
8412                 DPFCRUNIT_CLOCK_GATE_DISABLE |
8413                 DPFDUNIT_CLOCK_GATE_DISABLE;
8414         /* Required for CxSR */
8415         dspclk_gate |= DPARBUNIT_CLOCK_GATE_DISABLE;
8416
8417         I915_WRITE(PCH_3DCGDIS0,
8418                    MARIUNIT_CLOCK_GATE_DISABLE |
8419                    SVSMUNIT_CLOCK_GATE_DISABLE);
8420         I915_WRITE(PCH_3DCGDIS1,
8421                    VFMUNIT_CLOCK_GATE_DISABLE);
8422
8423         I915_WRITE(PCH_DSPCLK_GATE_D, dspclk_gate);
8424
8425         /*
8426          * According to the spec the following bits should be set in
8427          * order to enable memory self-refresh
8428          * The bit 22/21 of 0x42004
8429          * The bit 5 of 0x42020
8430          * The bit 15 of 0x45000
8431          */
8432         I915_WRITE(ILK_DISPLAY_CHICKEN2,
8433                    (I915_READ(ILK_DISPLAY_CHICKEN2) |
8434                     ILK_DPARB_GATE | ILK_VSDPFD_FULL));
8435         I915_WRITE(ILK_DSPCLK_GATE,
8436                    (I915_READ(ILK_DSPCLK_GATE) |
8437                     ILK_DPARB_CLK_GATE));
8438         I915_WRITE(DISP_ARB_CTL,
8439                    (I915_READ(DISP_ARB_CTL) |
8440                     DISP_FBC_WM_DIS));
8441         I915_WRITE(WM3_LP_ILK, 0);
8442         I915_WRITE(WM2_LP_ILK, 0);
8443         I915_WRITE(WM1_LP_ILK, 0);
8444
8445         /*
8446          * Based on the document from hardware guys the following bits
8447          * should be set unconditionally in order to enable FBC.
8448          * The bit 22 of 0x42000
8449          * The bit 22 of 0x42004
8450          * The bit 7,8,9 of 0x42020.
8451          */
8452         if (IS_IRONLAKE_M(dev)) {
8453                 I915_WRITE(ILK_DISPLAY_CHICKEN1,
8454                            I915_READ(ILK_DISPLAY_CHICKEN1) |
8455                            ILK_FBCQ_DIS);
8456                 I915_WRITE(ILK_DISPLAY_CHICKEN2,
8457                            I915_READ(ILK_DISPLAY_CHICKEN2) |
8458                            ILK_DPARB_GATE);
8459                 I915_WRITE(ILK_DSPCLK_GATE,
8460                            I915_READ(ILK_DSPCLK_GATE) |
8461                            ILK_DPFC_DIS1 |
8462                            ILK_DPFC_DIS2 |
8463                            ILK_CLK_FBC);
8464         }
8465
8466         I915_WRITE(ILK_DISPLAY_CHICKEN2,
8467                    I915_READ(ILK_DISPLAY_CHICKEN2) |
8468                    ILK_ELPIN_409_SELECT);
8469         I915_WRITE(_3D_CHICKEN2,
8470                    _3D_CHICKEN2_WM_READ_PIPELINED << 16 |
8471                    _3D_CHICKEN2_WM_READ_PIPELINED);
8472 }
8473
8474 static void gen6_init_clock_gating(struct drm_device *dev)
8475 {
8476         struct drm_i915_private *dev_priv = dev->dev_private;
8477         int pipe;
8478         uint32_t dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE;
8479
8480         I915_WRITE(PCH_DSPCLK_GATE_D, dspclk_gate);
8481
8482         I915_WRITE(ILK_DISPLAY_CHICKEN2,
8483                    I915_READ(ILK_DISPLAY_CHICKEN2) |
8484                    ILK_ELPIN_409_SELECT);
8485
8486         I915_WRITE(WM3_LP_ILK, 0);
8487         I915_WRITE(WM2_LP_ILK, 0);
8488         I915_WRITE(WM1_LP_ILK, 0);
8489
8490         /* According to the BSpec vol1g, bit 12 (RCPBUNIT) clock
8491          * gating disable must be set.  Failure to set it results in
8492          * flickering pixels due to Z write ordering failures after
8493          * some amount of runtime in the Mesa "fire" demo, and Unigine
8494          * Sanctuary and Tropics, and apparently anything else with
8495          * alpha test or pixel discard.
8496          *
8497          * According to the spec, bit 11 (RCCUNIT) must also be set,
8498          * but we didn't debug actual testcases to find it out.
8499          */
8500         I915_WRITE(GEN6_UCGCTL2,
8501                    GEN6_RCPBUNIT_CLOCK_GATE_DISABLE |
8502                    GEN6_RCCUNIT_CLOCK_GATE_DISABLE);
8503
8504         /*
8505          * According to the spec the following bits should be
8506          * set in order to enable memory self-refresh and fbc:
8507          * The bit21 and bit22 of 0x42000
8508          * The bit21 and bit22 of 0x42004
8509          * The bit5 and bit7 of 0x42020
8510          * The bit14 of 0x70180
8511          * The bit14 of 0x71180
8512          */
8513         I915_WRITE(ILK_DISPLAY_CHICKEN1,
8514                    I915_READ(ILK_DISPLAY_CHICKEN1) |
8515                    ILK_FBCQ_DIS | ILK_PABSTRETCH_DIS);
8516         I915_WRITE(ILK_DISPLAY_CHICKEN2,
8517                    I915_READ(ILK_DISPLAY_CHICKEN2) |
8518                    ILK_DPARB_GATE | ILK_VSDPFD_FULL);
8519         I915_WRITE(ILK_DSPCLK_GATE,
8520                    I915_READ(ILK_DSPCLK_GATE) |
8521                    ILK_DPARB_CLK_GATE  |
8522                    ILK_DPFD_CLK_GATE);
8523
8524         for_each_pipe(pipe) {
8525                 I915_WRITE(DSPCNTR(pipe),
8526                            I915_READ(DSPCNTR(pipe)) |
8527                            DISPPLANE_TRICKLE_FEED_DISABLE);
8528                 intel_flush_display_plane(dev_priv, pipe);
8529         }
8530 }
8531
8532 static void ivybridge_init_clock_gating(struct drm_device *dev)
8533 {
8534         struct drm_i915_private *dev_priv = dev->dev_private;
8535         int pipe;
8536         uint32_t dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE;
8537
8538         I915_WRITE(PCH_DSPCLK_GATE_D, dspclk_gate);
8539
8540         I915_WRITE(WM3_LP_ILK, 0);
8541         I915_WRITE(WM2_LP_ILK, 0);
8542         I915_WRITE(WM1_LP_ILK, 0);
8543
8544         I915_WRITE(ILK_DSPCLK_GATE, IVB_VRHUNIT_CLK_GATE);
8545
8546         I915_WRITE(IVB_CHICKEN3,
8547                    CHICKEN3_DGMG_REQ_OUT_FIX_DISABLE |
8548                    CHICKEN3_DGMG_DONE_FIX_DISABLE);
8549
8550         for_each_pipe(pipe) {
8551                 I915_WRITE(DSPCNTR(pipe),
8552                            I915_READ(DSPCNTR(pipe)) |
8553                            DISPPLANE_TRICKLE_FEED_DISABLE);
8554                 intel_flush_display_plane(dev_priv, pipe);
8555         }
8556 }
8557
8558 static void g4x_init_clock_gating(struct drm_device *dev)
8559 {
8560         struct drm_i915_private *dev_priv = dev->dev_private;
8561         uint32_t dspclk_gate;
8562
8563         I915_WRITE(RENCLK_GATE_D1, 0);
8564         I915_WRITE(RENCLK_GATE_D2, VF_UNIT_CLOCK_GATE_DISABLE |
8565                    GS_UNIT_CLOCK_GATE_DISABLE |
8566                    CL_UNIT_CLOCK_GATE_DISABLE);
8567         I915_WRITE(RAMCLK_GATE_D, 0);
8568         dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE |
8569                 OVRUNIT_CLOCK_GATE_DISABLE |
8570                 OVCUNIT_CLOCK_GATE_DISABLE;
8571         if (IS_GM45(dev))
8572                 dspclk_gate |= DSSUNIT_CLOCK_GATE_DISABLE;
8573         I915_WRITE(DSPCLK_GATE_D, dspclk_gate);
8574 }
8575
8576 static void crestline_init_clock_gating(struct drm_device *dev)
8577 {
8578         struct drm_i915_private *dev_priv = dev->dev_private;
8579
8580         I915_WRITE(RENCLK_GATE_D1, I965_RCC_CLOCK_GATE_DISABLE);
8581         I915_WRITE(RENCLK_GATE_D2, 0);
8582         I915_WRITE(DSPCLK_GATE_D, 0);
8583         I915_WRITE(RAMCLK_GATE_D, 0);
8584         I915_WRITE16(DEUC, 0);
8585 }
8586
8587 static void broadwater_init_clock_gating(struct drm_device *dev)
8588 {
8589         struct drm_i915_private *dev_priv = dev->dev_private;
8590
8591         I915_WRITE(RENCLK_GATE_D1, I965_RCZ_CLOCK_GATE_DISABLE |
8592                    I965_RCC_CLOCK_GATE_DISABLE |
8593                    I965_RCPB_CLOCK_GATE_DISABLE |
8594                    I965_ISC_CLOCK_GATE_DISABLE |
8595                    I965_FBC_CLOCK_GATE_DISABLE);
8596         I915_WRITE(RENCLK_GATE_D2, 0);
8597 }
8598
8599 static void gen3_init_clock_gating(struct drm_device *dev)
8600 {
8601         struct drm_i915_private *dev_priv = dev->dev_private;
8602         u32 dstate = I915_READ(D_STATE);
8603
8604         dstate |= DSTATE_PLL_D3_OFF | DSTATE_GFX_CLOCK_GATING |
8605                 DSTATE_DOT_CLOCK_GATING;
8606         I915_WRITE(D_STATE, dstate);
8607 }
8608
8609 static void i85x_init_clock_gating(struct drm_device *dev)
8610 {
8611         struct drm_i915_private *dev_priv = dev->dev_private;
8612
8613         I915_WRITE(RENCLK_GATE_D1, SV_CLOCK_GATE_DISABLE);
8614 }
8615
8616 static void i830_init_clock_gating(struct drm_device *dev)
8617 {
8618         struct drm_i915_private *dev_priv = dev->dev_private;
8619
8620         I915_WRITE(DSPCLK_GATE_D, OVRUNIT_CLOCK_GATE_DISABLE);
8621 }
8622
8623 static void ibx_init_clock_gating(struct drm_device *dev)
8624 {
8625         struct drm_i915_private *dev_priv = dev->dev_private;
8626
8627         /*
8628          * On Ibex Peak and Cougar Point, we need to disable clock
8629          * gating for the panel power sequencer or it will fail to
8630          * start up when no ports are active.
8631          */
8632         I915_WRITE(SOUTH_DSPCLK_GATE_D, PCH_DPLSUNIT_CLOCK_GATE_DISABLE);
8633 }
8634
8635 static void cpt_init_clock_gating(struct drm_device *dev)
8636 {
8637         struct drm_i915_private *dev_priv = dev->dev_private;
8638         int pipe;
8639
8640         /*
8641          * On Ibex Peak and Cougar Point, we need to disable clock
8642          * gating for the panel power sequencer or it will fail to
8643          * start up when no ports are active.
8644          */
8645         I915_WRITE(SOUTH_DSPCLK_GATE_D, PCH_DPLSUNIT_CLOCK_GATE_DISABLE);
8646         I915_WRITE(SOUTH_CHICKEN2, I915_READ(SOUTH_CHICKEN2) |
8647                    DPLS_EDP_PPS_FIX_DIS);
8648         /* Without this, mode sets may fail silently on FDI */
8649         for_each_pipe(pipe)
8650                 I915_WRITE(TRANS_CHICKEN2(pipe), TRANS_AUTOTRAIN_GEN_STALL_DIS);
8651 }
8652
8653 static void ironlake_teardown_rc6(struct drm_device *dev)
8654 {
8655         struct drm_i915_private *dev_priv = dev->dev_private;
8656
8657         if (dev_priv->renderctx) {
8658                 i915_gem_object_unpin(dev_priv->renderctx);
8659                 drm_gem_object_unreference(&dev_priv->renderctx->base);
8660                 dev_priv->renderctx = NULL;
8661         }
8662
8663         if (dev_priv->pwrctx) {
8664                 i915_gem_object_unpin(dev_priv->pwrctx);
8665                 drm_gem_object_unreference(&dev_priv->pwrctx->base);
8666                 dev_priv->pwrctx = NULL;
8667         }
8668 }
8669
8670 static void ironlake_disable_rc6(struct drm_device *dev)
8671 {
8672         struct drm_i915_private *dev_priv = dev->dev_private;
8673
8674         if (I915_READ(PWRCTXA)) {
8675                 /* Wake the GPU, prevent RC6, then restore RSTDBYCTL */
8676                 I915_WRITE(RSTDBYCTL, I915_READ(RSTDBYCTL) | RCX_SW_EXIT);
8677                 wait_for(((I915_READ(RSTDBYCTL) & RSX_STATUS_MASK) == RSX_STATUS_ON),
8678                          50);
8679
8680                 I915_WRITE(PWRCTXA, 0);
8681                 POSTING_READ(PWRCTXA);
8682
8683                 I915_WRITE(RSTDBYCTL, I915_READ(RSTDBYCTL) & ~RCX_SW_EXIT);
8684                 POSTING_READ(RSTDBYCTL);
8685         }
8686
8687         ironlake_teardown_rc6(dev);
8688 }
8689
8690 static int ironlake_setup_rc6(struct drm_device *dev)
8691 {
8692         struct drm_i915_private *dev_priv = dev->dev_private;
8693
8694         if (dev_priv->renderctx == NULL)
8695                 dev_priv->renderctx = intel_alloc_context_page(dev);
8696         if (!dev_priv->renderctx)
8697                 return -ENOMEM;
8698
8699         if (dev_priv->pwrctx == NULL)
8700                 dev_priv->pwrctx = intel_alloc_context_page(dev);
8701         if (!dev_priv->pwrctx) {
8702                 ironlake_teardown_rc6(dev);
8703                 return -ENOMEM;
8704         }
8705
8706         return 0;
8707 }
8708
8709 void ironlake_enable_rc6(struct drm_device *dev)
8710 {
8711         struct drm_i915_private *dev_priv = dev->dev_private;
8712         int ret;
8713
8714         /* rc6 disabled by default due to repeated reports of hanging during
8715          * boot and resume.
8716          */
8717         if (!intel_enable_rc6(dev))
8718                 return;
8719
8720         mutex_lock(&dev->struct_mutex);
8721         ret = ironlake_setup_rc6(dev);
8722         if (ret) {
8723                 mutex_unlock(&dev->struct_mutex);
8724                 return;
8725         }
8726
8727         /*
8728          * GPU can automatically power down the render unit if given a page
8729          * to save state.
8730          */
8731         ret = BEGIN_LP_RING(6);
8732         if (ret) {
8733                 ironlake_teardown_rc6(dev);
8734                 mutex_unlock(&dev->struct_mutex);
8735                 return;
8736         }
8737
8738         OUT_RING(MI_SUSPEND_FLUSH | MI_SUSPEND_FLUSH_EN);
8739         OUT_RING(MI_SET_CONTEXT);
8740         OUT_RING(dev_priv->renderctx->gtt_offset |
8741                  MI_MM_SPACE_GTT |
8742                  MI_SAVE_EXT_STATE_EN |
8743                  MI_RESTORE_EXT_STATE_EN |
8744                  MI_RESTORE_INHIBIT);
8745         OUT_RING(MI_SUSPEND_FLUSH);
8746         OUT_RING(MI_NOOP);
8747         OUT_RING(MI_FLUSH);
8748         ADVANCE_LP_RING();
8749
8750         /*
8751          * Wait for the command parser to advance past MI_SET_CONTEXT. The HW
8752          * does an implicit flush, combined with MI_FLUSH above, it should be
8753          * safe to assume that renderctx is valid
8754          */
8755         ret = intel_wait_ring_idle(LP_RING(dev_priv));
8756         if (ret) {
8757                 DRM_ERROR("failed to enable ironlake power power savings\n");
8758                 ironlake_teardown_rc6(dev);
8759                 mutex_unlock(&dev->struct_mutex);
8760                 return;
8761         }
8762
8763         I915_WRITE(PWRCTXA, dev_priv->pwrctx->gtt_offset | PWRCTX_EN);
8764         I915_WRITE(RSTDBYCTL, I915_READ(RSTDBYCTL) & ~RCX_SW_EXIT);
8765         mutex_unlock(&dev->struct_mutex);
8766 }
8767
8768 void intel_init_clock_gating(struct drm_device *dev)
8769 {
8770         struct drm_i915_private *dev_priv = dev->dev_private;
8771
8772         dev_priv->display.init_clock_gating(dev);
8773
8774         if (dev_priv->display.init_pch_clock_gating)
8775                 dev_priv->display.init_pch_clock_gating(dev);
8776 }
8777
8778 /* Set up chip specific display functions */
8779 static void intel_init_display(struct drm_device *dev)
8780 {
8781         struct drm_i915_private *dev_priv = dev->dev_private;
8782
8783         /* We always want a DPMS function */
8784         if (HAS_PCH_SPLIT(dev)) {
8785                 dev_priv->display.dpms = ironlake_crtc_dpms;
8786                 dev_priv->display.crtc_mode_set = ironlake_crtc_mode_set;
8787                 dev_priv->display.update_plane = ironlake_update_plane;
8788         } else {
8789                 dev_priv->display.dpms = i9xx_crtc_dpms;
8790                 dev_priv->display.crtc_mode_set = i9xx_crtc_mode_set;
8791                 dev_priv->display.update_plane = i9xx_update_plane;
8792         }
8793
8794         if (I915_HAS_FBC(dev)) {
8795                 if (HAS_PCH_SPLIT(dev)) {
8796                         dev_priv->display.fbc_enabled = ironlake_fbc_enabled;
8797                         dev_priv->display.enable_fbc = ironlake_enable_fbc;
8798                         dev_priv->display.disable_fbc = ironlake_disable_fbc;
8799                 } else if (IS_GM45(dev)) {
8800                         dev_priv->display.fbc_enabled = g4x_fbc_enabled;
8801                         dev_priv->display.enable_fbc = g4x_enable_fbc;
8802                         dev_priv->display.disable_fbc = g4x_disable_fbc;
8803                 } else if (IS_CRESTLINE(dev)) {
8804                         dev_priv->display.fbc_enabled = i8xx_fbc_enabled;
8805                         dev_priv->display.enable_fbc = i8xx_enable_fbc;
8806                         dev_priv->display.disable_fbc = i8xx_disable_fbc;
8807                 }
8808                 /* 855GM needs testing */
8809         }
8810
8811         /* Returns the core display clock speed */
8812         if (IS_I945G(dev) || (IS_G33(dev) && !IS_PINEVIEW_M(dev)))
8813                 dev_priv->display.get_display_clock_speed =
8814                         i945_get_display_clock_speed;
8815         else if (IS_I915G(dev))
8816                 dev_priv->display.get_display_clock_speed =
8817                         i915_get_display_clock_speed;
8818         else if (IS_I945GM(dev) || IS_845G(dev) || IS_PINEVIEW_M(dev))
8819                 dev_priv->display.get_display_clock_speed =
8820                         i9xx_misc_get_display_clock_speed;
8821         else if (IS_I915GM(dev))
8822                 dev_priv->display.get_display_clock_speed =
8823                         i915gm_get_display_clock_speed;
8824         else if (IS_I865G(dev))
8825                 dev_priv->display.get_display_clock_speed =
8826                         i865_get_display_clock_speed;
8827         else if (IS_I85X(dev))
8828                 dev_priv->display.get_display_clock_speed =
8829                         i855_get_display_clock_speed;
8830         else /* 852, 830 */
8831                 dev_priv->display.get_display_clock_speed =
8832                         i830_get_display_clock_speed;
8833
8834         /* For FIFO watermark updates */
8835         if (HAS_PCH_SPLIT(dev)) {
8836                 dev_priv->display.force_wake_get = __gen6_gt_force_wake_get;
8837                 dev_priv->display.force_wake_put = __gen6_gt_force_wake_put;
8838
8839                 /* IVB configs may use multi-threaded forcewake */
8840                 if (IS_IVYBRIDGE(dev)) {
8841                         u32     ecobus;
8842
8843                         /* A small trick here - if the bios hasn't configured MT forcewake,
8844                          * and if the device is in RC6, then force_wake_mt_get will not wake
8845                          * the device and the ECOBUS read will return zero. Which will be
8846                          * (correctly) interpreted by the test below as MT forcewake being
8847                          * disabled.
8848                          */
8849                         mutex_lock(&dev->struct_mutex);
8850                         __gen6_gt_force_wake_mt_get(dev_priv);
8851                         ecobus = I915_READ_NOTRACE(ECOBUS);
8852                         __gen6_gt_force_wake_mt_put(dev_priv);
8853                         mutex_unlock(&dev->struct_mutex);
8854
8855                         if (ecobus & FORCEWAKE_MT_ENABLE) {
8856                                 DRM_DEBUG_KMS("Using MT version of forcewake\n");
8857                                 dev_priv->display.force_wake_get =
8858                                         __gen6_gt_force_wake_mt_get;
8859                                 dev_priv->display.force_wake_put =
8860                                         __gen6_gt_force_wake_mt_put;
8861                         }
8862                 }
8863
8864                 if (HAS_PCH_IBX(dev))
8865                         dev_priv->display.init_pch_clock_gating = ibx_init_clock_gating;
8866                 else if (HAS_PCH_CPT(dev))
8867                         dev_priv->display.init_pch_clock_gating = cpt_init_clock_gating;
8868
8869                 if (IS_GEN5(dev)) {
8870                         if (I915_READ(MLTR_ILK) & ILK_SRLT_MASK)
8871                                 dev_priv->display.update_wm = ironlake_update_wm;
8872                         else {
8873                                 DRM_DEBUG_KMS("Failed to get proper latency. "
8874                                               "Disable CxSR\n");
8875                                 dev_priv->display.update_wm = NULL;
8876                         }
8877                         dev_priv->display.fdi_link_train = ironlake_fdi_link_train;
8878                         dev_priv->display.init_clock_gating = ironlake_init_clock_gating;
8879                         dev_priv->display.write_eld = ironlake_write_eld;
8880                 } else if (IS_GEN6(dev)) {
8881                         if (SNB_READ_WM0_LATENCY()) {
8882                                 dev_priv->display.update_wm = sandybridge_update_wm;
8883                                 dev_priv->display.update_sprite_wm = sandybridge_update_sprite_wm;
8884                         } else {
8885                                 DRM_DEBUG_KMS("Failed to read display plane latency. "
8886                                               "Disable CxSR\n");
8887                                 dev_priv->display.update_wm = NULL;
8888                         }
8889                         dev_priv->display.fdi_link_train = gen6_fdi_link_train;
8890                         dev_priv->display.init_clock_gating = gen6_init_clock_gating;
8891                         dev_priv->display.write_eld = ironlake_write_eld;
8892                 } else if (IS_IVYBRIDGE(dev)) {
8893                         /* FIXME: detect B0+ stepping and use auto training */
8894                         dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train;
8895                         if (SNB_READ_WM0_LATENCY()) {
8896                                 dev_priv->display.update_wm = sandybridge_update_wm;
8897                                 dev_priv->display.update_sprite_wm = sandybridge_update_sprite_wm;
8898                         } else {
8899                                 DRM_DEBUG_KMS("Failed to read display plane latency. "
8900                                               "Disable CxSR\n");
8901                                 dev_priv->display.update_wm = NULL;
8902                         }
8903                         dev_priv->display.init_clock_gating = ivybridge_init_clock_gating;
8904                         dev_priv->display.write_eld = ironlake_write_eld;
8905                 } else
8906                         dev_priv->display.update_wm = NULL;
8907         } else if (IS_PINEVIEW(dev)) {
8908                 if (!intel_get_cxsr_latency(IS_PINEVIEW_G(dev),
8909                                             dev_priv->is_ddr3,
8910                                             dev_priv->fsb_freq,
8911                                             dev_priv->mem_freq)) {
8912                         DRM_INFO("failed to find known CxSR latency "
8913                                  "(found ddr%s fsb freq %d, mem freq %d), "
8914                                  "disabling CxSR\n",
8915                                  (dev_priv->is_ddr3 == 1) ? "3" : "2",
8916                                  dev_priv->fsb_freq, dev_priv->mem_freq);
8917                         /* Disable CxSR and never update its watermark again */
8918                         pineview_disable_cxsr(dev);
8919                         dev_priv->display.update_wm = NULL;
8920                 } else
8921                         dev_priv->display.update_wm = pineview_update_wm;
8922                 dev_priv->display.init_clock_gating = gen3_init_clock_gating;
8923         } else if (IS_G4X(dev)) {
8924                 dev_priv->display.write_eld = g4x_write_eld;
8925                 dev_priv->display.update_wm = g4x_update_wm;
8926                 dev_priv->display.init_clock_gating = g4x_init_clock_gating;
8927         } else if (IS_GEN4(dev)) {
8928                 dev_priv->display.update_wm = i965_update_wm;
8929                 if (IS_CRESTLINE(dev))
8930                         dev_priv->display.init_clock_gating = crestline_init_clock_gating;
8931                 else if (IS_BROADWATER(dev))
8932                         dev_priv->display.init_clock_gating = broadwater_init_clock_gating;
8933         } else if (IS_GEN3(dev)) {
8934                 dev_priv->display.update_wm = i9xx_update_wm;
8935                 dev_priv->display.get_fifo_size = i9xx_get_fifo_size;
8936                 dev_priv->display.init_clock_gating = gen3_init_clock_gating;
8937         } else if (IS_I865G(dev)) {
8938                 dev_priv->display.update_wm = i830_update_wm;
8939                 dev_priv->display.init_clock_gating = i85x_init_clock_gating;
8940                 dev_priv->display.get_fifo_size = i830_get_fifo_size;
8941         } else if (IS_I85X(dev)) {
8942                 dev_priv->display.update_wm = i9xx_update_wm;
8943                 dev_priv->display.get_fifo_size = i85x_get_fifo_size;
8944                 dev_priv->display.init_clock_gating = i85x_init_clock_gating;
8945         } else {
8946                 dev_priv->display.update_wm = i830_update_wm;
8947                 dev_priv->display.init_clock_gating = i830_init_clock_gating;
8948                 if (IS_845G(dev))
8949                         dev_priv->display.get_fifo_size = i845_get_fifo_size;
8950                 else
8951                         dev_priv->display.get_fifo_size = i830_get_fifo_size;
8952         }
8953
8954         /* Default just returns -ENODEV to indicate unsupported */
8955         dev_priv->display.queue_flip = intel_default_queue_flip;
8956
8957         switch (INTEL_INFO(dev)->gen) {
8958         case 2:
8959                 dev_priv->display.queue_flip = intel_gen2_queue_flip;
8960                 break;
8961
8962         case 3:
8963                 dev_priv->display.queue_flip = intel_gen3_queue_flip;
8964                 break;
8965
8966         case 4:
8967         case 5:
8968                 dev_priv->display.queue_flip = intel_gen4_queue_flip;
8969                 break;
8970
8971         case 6:
8972                 dev_priv->display.queue_flip = intel_gen6_queue_flip;
8973                 break;
8974         case 7:
8975                 dev_priv->display.queue_flip = intel_gen7_queue_flip;
8976                 break;
8977         }
8978 }
8979
8980 /*
8981  * Some BIOSes insist on assuming the GPU's pipe A is enabled at suspend,
8982  * resume, or other times.  This quirk makes sure that's the case for
8983  * affected systems.
8984  */
8985 static void quirk_pipea_force(struct drm_device *dev)
8986 {
8987         struct drm_i915_private *dev_priv = dev->dev_private;
8988
8989         dev_priv->quirks |= QUIRK_PIPEA_FORCE;
8990         DRM_DEBUG_DRIVER("applying pipe a force quirk\n");
8991 }
8992
8993 /*
8994  * Some machines (Lenovo U160) do not work with SSC on LVDS for some reason
8995  */
8996 static void quirk_ssc_force_disable(struct drm_device *dev)
8997 {
8998         struct drm_i915_private *dev_priv = dev->dev_private;
8999         dev_priv->quirks |= QUIRK_LVDS_SSC_DISABLE;
9000 }
9001
9002 struct intel_quirk {
9003         int device;
9004         int subsystem_vendor;
9005         int subsystem_device;
9006         void (*hook)(struct drm_device *dev);
9007 };
9008
9009 struct intel_quirk intel_quirks[] = {
9010         /* HP Compaq 2730p needs pipe A force quirk (LP: #291555) */
9011         { 0x2a42, 0x103c, 0x30eb, quirk_pipea_force },
9012         /* HP Mini needs pipe A force quirk (LP: #322104) */
9013         { 0x27ae, 0x103c, 0x361a, quirk_pipea_force },
9014
9015         /* Thinkpad R31 needs pipe A force quirk */
9016         { 0x3577, 0x1014, 0x0505, quirk_pipea_force },
9017         /* Toshiba Protege R-205, S-209 needs pipe A force quirk */
9018         { 0x2592, 0x1179, 0x0001, quirk_pipea_force },
9019
9020         /* ThinkPad X30 needs pipe A force quirk (LP: #304614) */
9021         { 0x3577,  0x1014, 0x0513, quirk_pipea_force },
9022         /* ThinkPad X40 needs pipe A force quirk */
9023
9024         /* ThinkPad T60 needs pipe A force quirk (bug #16494) */
9025         { 0x2782, 0x17aa, 0x201a, quirk_pipea_force },
9026
9027         /* 855 & before need to leave pipe A & dpll A up */
9028         { 0x3582, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
9029         { 0x2562, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
9030
9031         /* Lenovo U160 cannot use SSC on LVDS */
9032         { 0x0046, 0x17aa, 0x3920, quirk_ssc_force_disable },
9033
9034         /* Sony Vaio Y cannot use SSC on LVDS */
9035         { 0x0046, 0x104d, 0x9076, quirk_ssc_force_disable },
9036 };
9037
9038 static void intel_init_quirks(struct drm_device *dev)
9039 {
9040         struct pci_dev *d = dev->pdev;
9041         int i;
9042
9043         for (i = 0; i < ARRAY_SIZE(intel_quirks); i++) {
9044                 struct intel_quirk *q = &intel_quirks[i];
9045
9046                 if (d->device == q->device &&
9047                     (d->subsystem_vendor == q->subsystem_vendor ||
9048                      q->subsystem_vendor == PCI_ANY_ID) &&
9049                     (d->subsystem_device == q->subsystem_device ||
9050                      q->subsystem_device == PCI_ANY_ID))
9051                         q->hook(dev);
9052         }
9053 }
9054
9055 /* Disable the VGA plane that we never use */
9056 static void i915_disable_vga(struct drm_device *dev)
9057 {
9058         struct drm_i915_private *dev_priv = dev->dev_private;
9059         u8 sr1;
9060         u32 vga_reg;
9061
9062         if (HAS_PCH_SPLIT(dev))
9063                 vga_reg = CPU_VGACNTRL;
9064         else
9065                 vga_reg = VGACNTRL;
9066
9067         vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO);
9068         outb(1, VGA_SR_INDEX);
9069         sr1 = inb(VGA_SR_DATA);
9070         outb(sr1 | 1<<5, VGA_SR_DATA);
9071         vga_put(dev->pdev, VGA_RSRC_LEGACY_IO);
9072         udelay(300);
9073
9074         I915_WRITE(vga_reg, VGA_DISP_DISABLE);
9075         POSTING_READ(vga_reg);
9076 }
9077
9078 void intel_modeset_init(struct drm_device *dev)
9079 {
9080         struct drm_i915_private *dev_priv = dev->dev_private;
9081         int i, ret;
9082
9083         drm_mode_config_init(dev);
9084
9085         dev->mode_config.min_width = 0;
9086         dev->mode_config.min_height = 0;
9087
9088         dev->mode_config.funcs = (void *)&intel_mode_funcs;
9089
9090         intel_init_quirks(dev);
9091
9092         intel_init_display(dev);
9093
9094         if (IS_GEN2(dev)) {
9095                 dev->mode_config.max_width = 2048;
9096                 dev->mode_config.max_height = 2048;
9097         } else if (IS_GEN3(dev)) {
9098                 dev->mode_config.max_width = 4096;
9099                 dev->mode_config.max_height = 4096;
9100         } else {
9101                 dev->mode_config.max_width = 8192;
9102                 dev->mode_config.max_height = 8192;
9103         }
9104         dev->mode_config.fb_base = dev->agp->base;
9105
9106         DRM_DEBUG_KMS("%d display pipe%s available.\n",
9107                       dev_priv->num_pipe, dev_priv->num_pipe > 1 ? "s" : "");
9108
9109         for (i = 0; i < dev_priv->num_pipe; i++) {
9110                 intel_crtc_init(dev, i);
9111                 ret = intel_plane_init(dev, i);
9112                 if (ret)
9113                         DRM_DEBUG_KMS("plane %d init failed: %d\n", i, ret);
9114         }
9115
9116         /* Just disable it once at startup */
9117         i915_disable_vga(dev);
9118         intel_setup_outputs(dev);
9119
9120         intel_init_clock_gating(dev);
9121
9122         if (IS_IRONLAKE_M(dev)) {
9123                 ironlake_enable_drps(dev);
9124                 intel_init_emon(dev);
9125         }
9126
9127         if (IS_GEN6(dev) || IS_GEN7(dev)) {
9128                 gen6_enable_rps(dev_priv);
9129                 gen6_update_ring_freq(dev_priv);
9130         }
9131
9132         INIT_WORK(&dev_priv->idle_work, intel_idle_update);
9133         setup_timer(&dev_priv->idle_timer, intel_gpu_idle_timer,
9134                     (unsigned long)dev);
9135 }
9136
9137 void intel_modeset_gem_init(struct drm_device *dev)
9138 {
9139         if (IS_IRONLAKE_M(dev))
9140                 ironlake_enable_rc6(dev);
9141
9142         intel_setup_overlay(dev);
9143 }
9144
9145 void intel_modeset_cleanup(struct drm_device *dev)
9146 {
9147         struct drm_i915_private *dev_priv = dev->dev_private;
9148         struct drm_crtc *crtc;
9149         struct intel_crtc *intel_crtc;
9150
9151         drm_kms_helper_poll_fini(dev);
9152         mutex_lock(&dev->struct_mutex);
9153
9154         intel_unregister_dsm_handler();
9155
9156
9157         list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
9158                 /* Skip inactive CRTCs */
9159                 if (!crtc->fb)
9160                         continue;
9161
9162                 intel_crtc = to_intel_crtc(crtc);
9163                 intel_increase_pllclock(crtc);
9164         }
9165
9166         intel_disable_fbc(dev);
9167
9168         if (IS_IRONLAKE_M(dev))
9169                 ironlake_disable_drps(dev);
9170         if (IS_GEN6(dev) || IS_GEN7(dev))
9171                 gen6_disable_rps(dev);
9172
9173         if (IS_IRONLAKE_M(dev))
9174                 ironlake_disable_rc6(dev);
9175
9176         mutex_unlock(&dev->struct_mutex);
9177
9178         /* Disable the irq before mode object teardown, for the irq might
9179          * enqueue unpin/hotplug work. */
9180         drm_irq_uninstall(dev);
9181         cancel_work_sync(&dev_priv->hotplug_work);
9182         cancel_work_sync(&dev_priv->rps_work);
9183
9184         /* flush any delayed tasks or pending work */
9185         flush_scheduled_work();
9186
9187         /* Shut off idle work before the crtcs get freed. */
9188         list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
9189                 intel_crtc = to_intel_crtc(crtc);
9190                 del_timer_sync(&intel_crtc->idle_timer);
9191         }
9192         del_timer_sync(&dev_priv->idle_timer);
9193         cancel_work_sync(&dev_priv->idle_work);
9194
9195         drm_mode_config_cleanup(dev);
9196 }
9197
9198 /*
9199  * Return which encoder is currently attached for connector.
9200  */
9201 struct drm_encoder *intel_best_encoder(struct drm_connector *connector)
9202 {
9203         return &intel_attached_encoder(connector)->base;
9204 }
9205
9206 void intel_connector_attach_encoder(struct intel_connector *connector,
9207                                     struct intel_encoder *encoder)
9208 {
9209         connector->encoder = encoder;
9210         drm_mode_connector_attach_encoder(&connector->base,
9211                                           &encoder->base);
9212 }
9213
9214 /*
9215  * set vga decode state - true == enable VGA decode
9216  */
9217 int intel_modeset_vga_set_state(struct drm_device *dev, bool state)
9218 {
9219         struct drm_i915_private *dev_priv = dev->dev_private;
9220         u16 gmch_ctrl;
9221
9222         pci_read_config_word(dev_priv->bridge_dev, INTEL_GMCH_CTRL, &gmch_ctrl);
9223         if (state)
9224                 gmch_ctrl &= ~INTEL_GMCH_VGA_DISABLE;
9225         else
9226                 gmch_ctrl |= INTEL_GMCH_VGA_DISABLE;
9227         pci_write_config_word(dev_priv->bridge_dev, INTEL_GMCH_CTRL, gmch_ctrl);
9228         return 0;
9229 }
9230
9231 #ifdef CONFIG_DEBUG_FS
9232 #include <linux/seq_file.h>
9233
9234 struct intel_display_error_state {
9235         struct intel_cursor_error_state {
9236                 u32 control;
9237                 u32 position;
9238                 u32 base;
9239                 u32 size;
9240         } cursor[2];
9241
9242         struct intel_pipe_error_state {
9243                 u32 conf;
9244                 u32 source;
9245
9246                 u32 htotal;
9247                 u32 hblank;
9248                 u32 hsync;
9249                 u32 vtotal;
9250                 u32 vblank;
9251                 u32 vsync;
9252         } pipe[2];
9253
9254         struct intel_plane_error_state {
9255                 u32 control;
9256                 u32 stride;
9257                 u32 size;
9258                 u32 pos;
9259                 u32 addr;
9260                 u32 surface;
9261                 u32 tile_offset;
9262         } plane[2];
9263 };
9264
9265 struct intel_display_error_state *
9266 intel_display_capture_error_state(struct drm_device *dev)
9267 {
9268         drm_i915_private_t *dev_priv = dev->dev_private;
9269         struct intel_display_error_state *error;
9270         int i;
9271
9272         error = kmalloc(sizeof(*error), GFP_ATOMIC);
9273         if (error == NULL)
9274                 return NULL;
9275
9276         for (i = 0; i < 2; i++) {
9277                 error->cursor[i].control = I915_READ(CURCNTR(i));
9278                 error->cursor[i].position = I915_READ(CURPOS(i));
9279                 error->cursor[i].base = I915_READ(CURBASE(i));
9280
9281                 error->plane[i].control = I915_READ(DSPCNTR(i));
9282                 error->plane[i].stride = I915_READ(DSPSTRIDE(i));
9283                 error->plane[i].size = I915_READ(DSPSIZE(i));
9284                 error->plane[i].pos = I915_READ(DSPPOS(i));
9285                 error->plane[i].addr = I915_READ(DSPADDR(i));
9286                 if (INTEL_INFO(dev)->gen >= 4) {
9287                         error->plane[i].surface = I915_READ(DSPSURF(i));
9288                         error->plane[i].tile_offset = I915_READ(DSPTILEOFF(i));
9289                 }
9290
9291                 error->pipe[i].conf = I915_READ(PIPECONF(i));
9292                 error->pipe[i].source = I915_READ(PIPESRC(i));
9293                 error->pipe[i].htotal = I915_READ(HTOTAL(i));
9294                 error->pipe[i].hblank = I915_READ(HBLANK(i));
9295                 error->pipe[i].hsync = I915_READ(HSYNC(i));
9296                 error->pipe[i].vtotal = I915_READ(VTOTAL(i));
9297                 error->pipe[i].vblank = I915_READ(VBLANK(i));
9298                 error->pipe[i].vsync = I915_READ(VSYNC(i));
9299         }
9300
9301         return error;
9302 }
9303
9304 void
9305 intel_display_print_error_state(struct seq_file *m,
9306                                 struct drm_device *dev,
9307                                 struct intel_display_error_state *error)
9308 {
9309         int i;
9310
9311         for (i = 0; i < 2; i++) {
9312                 seq_printf(m, "Pipe [%d]:\n", i);
9313                 seq_printf(m, "  CONF: %08x\n", error->pipe[i].conf);
9314                 seq_printf(m, "  SRC: %08x\n", error->pipe[i].source);
9315                 seq_printf(m, "  HTOTAL: %08x\n", error->pipe[i].htotal);
9316                 seq_printf(m, "  HBLANK: %08x\n", error->pipe[i].hblank);
9317                 seq_printf(m, "  HSYNC: %08x\n", error->pipe[i].hsync);
9318                 seq_printf(m, "  VTOTAL: %08x\n", error->pipe[i].vtotal);
9319                 seq_printf(m, "  VBLANK: %08x\n", error->pipe[i].vblank);
9320                 seq_printf(m, "  VSYNC: %08x\n", error->pipe[i].vsync);
9321
9322                 seq_printf(m, "Plane [%d]:\n", i);
9323                 seq_printf(m, "  CNTR: %08x\n", error->plane[i].control);
9324                 seq_printf(m, "  STRIDE: %08x\n", error->plane[i].stride);
9325                 seq_printf(m, "  SIZE: %08x\n", error->plane[i].size);
9326                 seq_printf(m, "  POS: %08x\n", error->plane[i].pos);
9327                 seq_printf(m, "  ADDR: %08x\n", error->plane[i].addr);
9328                 if (INTEL_INFO(dev)->gen >= 4) {
9329                         seq_printf(m, "  SURF: %08x\n", error->plane[i].surface);
9330                         seq_printf(m, "  TILEOFF: %08x\n", error->plane[i].tile_offset);
9331                 }
9332
9333                 seq_printf(m, "Cursor [%d]:\n", i);
9334                 seq_printf(m, "  CNTR: %08x\n", error->cursor[i].control);
9335                 seq_printf(m, "  POS: %08x\n", error->cursor[i].position);
9336                 seq_printf(m, "  BASE: %08x\n", error->cursor[i].base);
9337         }
9338 }
9339 #endif