2 * Copyright © 2006-2007 Intel Corporation
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
11 * The above copyright notice and this permission notice (including the next
12 * paragraph) shall be included in all copies or substantial portions of the
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
21 * DEALINGS IN THE SOFTWARE.
24 * Eric Anholt <eric@anholt.net>
27 #include <linux/i2c.h>
28 #include <linux/slab.h>
32 #include "drm_crtc_helper.h"
34 #include "intel_drv.h"
38 /* Here's the desired hotplug mode */
39 #define ADPA_HOTPLUG_BITS (ADPA_CRT_HOTPLUG_PERIOD_128 | \
40 ADPA_CRT_HOTPLUG_WARMUP_10MS | \
41 ADPA_CRT_HOTPLUG_SAMPLE_4S | \
42 ADPA_CRT_HOTPLUG_VOLTAGE_50 | \
43 ADPA_CRT_HOTPLUG_VOLREF_325MV | \
44 ADPA_CRT_HOTPLUG_ENABLE)
47 struct intel_encoder base;
48 bool force_hotplug_required;
51 static struct intel_crt *intel_attached_crt(struct drm_connector *connector)
53 return container_of(intel_attached_encoder(connector),
54 struct intel_crt, base);
57 static void intel_crt_dpms(struct drm_encoder *encoder, int mode)
59 struct drm_device *dev = encoder->dev;
60 struct drm_i915_private *dev_priv = dev->dev_private;
63 if (HAS_PCH_SPLIT(dev))
68 temp = I915_READ(reg);
69 temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE);
70 temp &= ~ADPA_DAC_ENABLE;
73 case DRM_MODE_DPMS_ON:
74 temp |= ADPA_DAC_ENABLE;
76 case DRM_MODE_DPMS_STANDBY:
77 temp |= ADPA_DAC_ENABLE | ADPA_HSYNC_CNTL_DISABLE;
79 case DRM_MODE_DPMS_SUSPEND:
80 temp |= ADPA_DAC_ENABLE | ADPA_VSYNC_CNTL_DISABLE;
82 case DRM_MODE_DPMS_OFF:
83 temp |= ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE;
87 I915_WRITE(reg, temp);
90 static int intel_crt_mode_valid(struct drm_connector *connector,
91 struct drm_display_mode *mode)
93 struct drm_device *dev = connector->dev;
96 if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
97 return MODE_NO_DBLESCAN;
99 if (mode->clock < 25000)
100 return MODE_CLOCK_LOW;
106 if (mode->clock > max_clock)
107 return MODE_CLOCK_HIGH;
112 static bool intel_crt_mode_fixup(struct drm_encoder *encoder,
113 struct drm_display_mode *mode,
114 struct drm_display_mode *adjusted_mode)
119 static void intel_crt_mode_set(struct drm_encoder *encoder,
120 struct drm_display_mode *mode,
121 struct drm_display_mode *adjusted_mode)
124 struct drm_device *dev = encoder->dev;
125 struct drm_crtc *crtc = encoder->crtc;
126 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
127 struct drm_i915_private *dev_priv = dev->dev_private;
132 dpll_md_reg = DPLL_MD(intel_crtc->pipe);
134 if (HAS_PCH_SPLIT(dev))
140 * Disable separate mode multiplier used when cloning SDVO to CRT
141 * XXX this needs to be adjusted when we really are cloning
143 if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev)) {
144 dpll_md = I915_READ(dpll_md_reg);
145 I915_WRITE(dpll_md_reg,
146 dpll_md & ~DPLL_MD_UDI_MULTIPLIER_MASK);
149 adpa = ADPA_HOTPLUG_BITS;
150 if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
151 adpa |= ADPA_HSYNC_ACTIVE_HIGH;
152 if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
153 adpa |= ADPA_VSYNC_ACTIVE_HIGH;
155 if (intel_crtc->pipe == 0) {
156 if (HAS_PCH_CPT(dev))
157 adpa |= PORT_TRANS_A_SEL_CPT;
159 adpa |= ADPA_PIPE_A_SELECT;
161 if (HAS_PCH_CPT(dev))
162 adpa |= PORT_TRANS_B_SEL_CPT;
164 adpa |= ADPA_PIPE_B_SELECT;
167 if (!HAS_PCH_SPLIT(dev))
168 I915_WRITE(BCLRPAT(intel_crtc->pipe), 0);
170 I915_WRITE(adpa_reg, adpa);
173 static bool intel_ironlake_crt_detect_hotplug(struct drm_connector *connector)
175 struct drm_device *dev = connector->dev;
176 struct intel_crt *crt = intel_attached_crt(connector);
177 struct drm_i915_private *dev_priv = dev->dev_private;
181 /* The first time through, trigger an explicit detection cycle */
182 if (crt->force_hotplug_required) {
183 bool turn_off_dac = HAS_PCH_SPLIT(dev);
186 crt->force_hotplug_required = 0;
188 save_adpa = adpa = I915_READ(PCH_ADPA);
189 DRM_DEBUG_KMS("trigger hotplug detect cycle: adpa=0x%x\n", adpa);
191 adpa |= ADPA_CRT_HOTPLUG_FORCE_TRIGGER;
193 adpa &= ~ADPA_DAC_ENABLE;
195 I915_WRITE(PCH_ADPA, adpa);
197 if (wait_for((I915_READ(PCH_ADPA) & ADPA_CRT_HOTPLUG_FORCE_TRIGGER) == 0,
199 DRM_DEBUG_KMS("timed out waiting for FORCE_TRIGGER");
202 I915_WRITE(PCH_ADPA, save_adpa);
203 POSTING_READ(PCH_ADPA);
207 /* Check the status to see if both blue and green are on now */
208 adpa = I915_READ(PCH_ADPA);
209 if ((adpa & ADPA_CRT_HOTPLUG_MONITOR_MASK) != 0)
213 DRM_DEBUG_KMS("ironlake hotplug adpa=0x%x, result %d\n", adpa, ret);
219 * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect CRT presence.
221 * Not for i915G/i915GM
223 * \return true if CRT is connected.
224 * \return false if CRT is disconnected.
226 static bool intel_crt_detect_hotplug(struct drm_connector *connector)
228 struct drm_device *dev = connector->dev;
229 struct drm_i915_private *dev_priv = dev->dev_private;
230 u32 hotplug_en, orig, stat;
234 if (HAS_PCH_SPLIT(dev))
235 return intel_ironlake_crt_detect_hotplug(connector);
238 * On 4 series desktop, CRT detect sequence need to be done twice
239 * to get a reliable result.
242 if (IS_G4X(dev) && !IS_GM45(dev))
246 hotplug_en = orig = I915_READ(PORT_HOTPLUG_EN);
247 hotplug_en |= CRT_HOTPLUG_FORCE_DETECT;
249 for (i = 0; i < tries ; i++) {
250 /* turn on the FORCE_DETECT */
251 I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
252 /* wait for FORCE_DETECT to go off */
253 if (wait_for((I915_READ(PORT_HOTPLUG_EN) &
254 CRT_HOTPLUG_FORCE_DETECT) == 0,
256 DRM_DEBUG_KMS("timed out waiting for FORCE_DETECT to go off");
259 stat = I915_READ(PORT_HOTPLUG_STAT);
260 if ((stat & CRT_HOTPLUG_MONITOR_MASK) != CRT_HOTPLUG_MONITOR_NONE)
263 /* clear the interrupt we just generated, if any */
264 I915_WRITE(PORT_HOTPLUG_STAT, CRT_HOTPLUG_INT_STATUS);
266 /* and put the bits back */
267 I915_WRITE(PORT_HOTPLUG_EN, orig);
272 static bool intel_crt_detect_ddc(struct drm_connector *connector)
274 struct intel_crt *crt = intel_attached_crt(connector);
275 struct drm_i915_private *dev_priv = crt->base.base.dev->dev_private;
277 /* CRT should always be at 0, but check anyway */
278 if (crt->base.type != INTEL_OUTPUT_ANALOG)
281 if (intel_ddc_probe(&crt->base, dev_priv->crt_ddc_pin)) {
283 bool is_digital = false;
285 edid = drm_get_edid(connector,
286 &dev_priv->gmbus[dev_priv->crt_ddc_pin].adapter);
288 * This may be a DVI-I connector with a shared DDC
289 * link between analog and digital outputs, so we
290 * have to check the EDID input spec of the attached device.
293 is_digital = edid->input & DRM_EDID_INPUT_DIGITAL;
294 connector->display_info.raw_edid = NULL;
299 DRM_DEBUG_KMS("CRT detected via DDC:0x50 [EDID]\n");
307 static enum drm_connector_status
308 intel_crt_load_detect(struct intel_crt *crt)
310 struct drm_device *dev = crt->base.base.dev;
311 struct drm_i915_private *dev_priv = dev->dev_private;
312 uint32_t pipe = to_intel_crtc(crt->base.base.crtc)->pipe;
313 uint32_t save_bclrpat;
314 uint32_t save_vtotal;
315 uint32_t vtotal, vactive;
317 uint32_t vblank, vblank_start, vblank_end;
319 uint32_t bclrpat_reg;
323 uint32_t pipeconf_reg;
324 uint32_t pipe_dsl_reg;
326 enum drm_connector_status status;
328 DRM_DEBUG_KMS("starting load-detect on CRT\n");
330 bclrpat_reg = BCLRPAT(pipe);
331 vtotal_reg = VTOTAL(pipe);
332 vblank_reg = VBLANK(pipe);
333 vsync_reg = VSYNC(pipe);
334 pipeconf_reg = PIPECONF(pipe);
335 pipe_dsl_reg = PIPEDSL(pipe);
337 save_bclrpat = I915_READ(bclrpat_reg);
338 save_vtotal = I915_READ(vtotal_reg);
339 vblank = I915_READ(vblank_reg);
341 vtotal = ((save_vtotal >> 16) & 0xfff) + 1;
342 vactive = (save_vtotal & 0x7ff) + 1;
344 vblank_start = (vblank & 0xfff) + 1;
345 vblank_end = ((vblank >> 16) & 0xfff) + 1;
347 /* Set the border color to purple. */
348 I915_WRITE(bclrpat_reg, 0x500050);
351 uint32_t pipeconf = I915_READ(pipeconf_reg);
352 I915_WRITE(pipeconf_reg, pipeconf | PIPECONF_FORCE_BORDER);
353 POSTING_READ(pipeconf_reg);
354 /* Wait for next Vblank to substitue
355 * border color for Color info */
356 intel_wait_for_vblank(dev, pipe);
357 st00 = I915_READ8(VGA_MSR_WRITE);
358 status = ((st00 & (1 << 4)) != 0) ?
359 connector_status_connected :
360 connector_status_disconnected;
362 I915_WRITE(pipeconf_reg, pipeconf);
364 bool restore_vblank = false;
368 * If there isn't any border, add some.
369 * Yes, this will flicker
371 if (vblank_start <= vactive && vblank_end >= vtotal) {
372 uint32_t vsync = I915_READ(vsync_reg);
373 uint32_t vsync_start = (vsync & 0xffff) + 1;
375 vblank_start = vsync_start;
376 I915_WRITE(vblank_reg,
378 ((vblank_end - 1) << 16));
379 restore_vblank = true;
381 /* sample in the vertical border, selecting the larger one */
382 if (vblank_start - vactive >= vtotal - vblank_end)
383 vsample = (vblank_start + vactive) >> 1;
385 vsample = (vtotal + vblank_end) >> 1;
388 * Wait for the border to be displayed
390 while (I915_READ(pipe_dsl_reg) >= vactive)
392 while ((dsl = I915_READ(pipe_dsl_reg)) <= vsample)
395 * Watch ST00 for an entire scanline
401 /* Read the ST00 VGA status register */
402 st00 = I915_READ8(VGA_MSR_WRITE);
405 } while ((I915_READ(pipe_dsl_reg) == dsl));
407 /* restore vblank if necessary */
409 I915_WRITE(vblank_reg, vblank);
411 * If more than 3/4 of the scanline detected a monitor,
412 * then it is assumed to be present. This works even on i830,
413 * where there isn't any way to force the border color across
416 status = detect * 4 > count * 3 ?
417 connector_status_connected :
418 connector_status_disconnected;
421 /* Restore previous settings */
422 I915_WRITE(bclrpat_reg, save_bclrpat);
427 static enum drm_connector_status
428 intel_crt_detect(struct drm_connector *connector, bool force)
430 struct drm_device *dev = connector->dev;
431 struct intel_crt *crt = intel_attached_crt(connector);
432 struct drm_crtc *crtc;
433 enum drm_connector_status status;
435 if (I915_HAS_HOTPLUG(dev)) {
436 if (intel_crt_detect_hotplug(connector)) {
437 DRM_DEBUG_KMS("CRT detected via hotplug\n");
438 return connector_status_connected;
440 DRM_DEBUG_KMS("CRT not detected via hotplug\n");
441 return connector_status_disconnected;
445 if (intel_crt_detect_ddc(connector))
446 return connector_status_connected;
449 return connector->status;
451 /* for pre-945g platforms use load detect */
452 crtc = crt->base.base.crtc;
453 if (crtc && crtc->enabled) {
454 status = intel_crt_load_detect(crt);
456 struct intel_load_detect_pipe tmp;
458 if (intel_get_load_detect_pipe(&crt->base, connector, NULL,
460 if (intel_crt_detect_ddc(connector))
461 status = connector_status_connected;
463 status = intel_crt_load_detect(crt);
464 intel_release_load_detect_pipe(&crt->base, connector,
467 status = connector_status_unknown;
473 static void intel_crt_destroy(struct drm_connector *connector)
475 drm_sysfs_connector_remove(connector);
476 drm_connector_cleanup(connector);
480 static int intel_crt_get_modes(struct drm_connector *connector)
482 struct drm_device *dev = connector->dev;
483 struct drm_i915_private *dev_priv = dev->dev_private;
486 ret = intel_ddc_get_modes(connector,
487 &dev_priv->gmbus[dev_priv->crt_ddc_pin].adapter);
488 if (ret || !IS_G4X(dev))
491 /* Try to probe digital port for output in DVI-I -> VGA mode. */
492 return intel_ddc_get_modes(connector,
493 &dev_priv->gmbus[GMBUS_PORT_DPB].adapter);
496 static int intel_crt_set_property(struct drm_connector *connector,
497 struct drm_property *property,
503 static void intel_crt_reset(struct drm_connector *connector)
505 struct drm_device *dev = connector->dev;
506 struct intel_crt *crt = intel_attached_crt(connector);
508 if (HAS_PCH_SPLIT(dev))
509 crt->force_hotplug_required = 1;
513 * Routines for controlling stuff on the analog port
516 static const struct drm_encoder_helper_funcs intel_crt_helper_funcs = {
517 .dpms = intel_crt_dpms,
518 .mode_fixup = intel_crt_mode_fixup,
519 .prepare = intel_encoder_prepare,
520 .commit = intel_encoder_commit,
521 .mode_set = intel_crt_mode_set,
524 static const struct drm_connector_funcs intel_crt_connector_funcs = {
525 .reset = intel_crt_reset,
526 .dpms = drm_helper_connector_dpms,
527 .detect = intel_crt_detect,
528 .fill_modes = drm_helper_probe_single_connector_modes,
529 .destroy = intel_crt_destroy,
530 .set_property = intel_crt_set_property,
533 static const struct drm_connector_helper_funcs intel_crt_connector_helper_funcs = {
534 .mode_valid = intel_crt_mode_valid,
535 .get_modes = intel_crt_get_modes,
536 .best_encoder = intel_best_encoder,
539 static const struct drm_encoder_funcs intel_crt_enc_funcs = {
540 .destroy = intel_encoder_destroy,
543 void intel_crt_init(struct drm_device *dev)
545 struct drm_connector *connector;
546 struct intel_crt *crt;
547 struct intel_connector *intel_connector;
548 struct drm_i915_private *dev_priv = dev->dev_private;
550 crt = kzalloc(sizeof(struct intel_crt), GFP_KERNEL);
554 intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL);
555 if (!intel_connector) {
560 connector = &intel_connector->base;
561 drm_connector_init(dev, &intel_connector->base,
562 &intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);
564 drm_encoder_init(dev, &crt->base.base, &intel_crt_enc_funcs,
565 DRM_MODE_ENCODER_DAC);
567 intel_connector_attach_encoder(intel_connector, &crt->base);
569 crt->base.type = INTEL_OUTPUT_ANALOG;
570 crt->base.clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT |
571 1 << INTEL_ANALOG_CLONE_BIT |
572 1 << INTEL_SDVO_LVDS_CLONE_BIT);
573 crt->base.crtc_mask = (1 << 0) | (1 << 1);
574 connector->interlace_allowed = 1;
575 connector->doublescan_allowed = 0;
577 drm_encoder_helper_add(&crt->base.base, &intel_crt_helper_funcs);
578 drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);
580 drm_sysfs_connector_add(connector);
582 if (I915_HAS_HOTPLUG(dev))
583 connector->polled = DRM_CONNECTOR_POLL_HPD;
585 connector->polled = DRM_CONNECTOR_POLL_CONNECT;
588 * Configure the automatic hotplug detection stuff
590 crt->force_hotplug_required = 0;
591 if (HAS_PCH_SPLIT(dev)) {
594 adpa = I915_READ(PCH_ADPA);
595 adpa &= ~ADPA_CRT_HOTPLUG_MASK;
596 adpa |= ADPA_HOTPLUG_BITS;
597 I915_WRITE(PCH_ADPA, adpa);
598 POSTING_READ(PCH_ADPA);
600 DRM_DEBUG_KMS("pch crt adpa set to 0x%x\n", adpa);
601 crt->force_hotplug_required = 1;
604 dev_priv->hotplug_supported_mask |= CRT_HOTPLUG_INT_STATUS;