drivers/gpu/drm/drm_crtc_helper.c

   1 /*
   2  * Copyright (c) 2006-2008 Intel Corporation
   3  * Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
   4  *
   5  * DRM core CRTC related functions
   6  *
   7  * Permission to use, copy, modify, distribute, and sell this software and its
   8  * documentation for any purpose is hereby granted without fee, provided that
   9  * the above copyright notice appear in all copies and that both that copyright
  10  * notice and this permission notice appear in supporting documentation, and
  11  * that the name of the copyright holders not be used in advertising or
  12  * publicity pertaining to distribution of the software without specific,
  13  * written prior permission.  The copyright holders make no representations
  14  * about the suitability of this software for any purpose.  It is provided "as
  15  * is" without express or implied warranty.
  16  *
  17  * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
  18  * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
  19  * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
  20  * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
  21  * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
  22  * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
  23  * OF THIS SOFTWARE.
  24  *
  25  * Authors:
  26  *      Keith Packard
  27  *      Eric Anholt <eric@anholt.net>
  28  *      Dave Airlie <airlied@linux.ie>
  29  *      Jesse Barnes <jesse.barnes@intel.com>
  30  */
  31
  32 #include "drmP.h"
  33 #include "drm_crtc.h"
  34 #include "drm_crtc_helper.h"
  35 #include "drm_fb_helper.h"
  36
  37 static bool drm_kms_helper_poll = true;
  38 module_param_named(poll, drm_kms_helper_poll, bool, 0600);
  39
  40 static void drm_mode_validate_flag(struct drm_connector *connector,
  41                                    int flags)
  42 {
  43         struct drm_display_mode *mode, *t;
  44
  45         if (flags == (DRM_MODE_FLAG_DBLSCAN | DRM_MODE_FLAG_INTERLACE))
  46                 return;
  47
  48         list_for_each_entry_safe(mode, t, &connector->modes, head) {
  49                 if ((mode->flags & DRM_MODE_FLAG_INTERLACE) &&
  50                                 !(flags & DRM_MODE_FLAG_INTERLACE))
  51                         mode->status = MODE_NO_INTERLACE;
  52                 if ((mode->flags & DRM_MODE_FLAG_DBLSCAN) &&
  53                                 !(flags & DRM_MODE_FLAG_DBLSCAN))
  54                         mode->status = MODE_NO_DBLESCAN;
  55         }
  56
  57         return;
  58 }
  59
  60 /**
  61  * drm_helper_probe_single_connector_modes - get complete set of display modes
  62  * @dev: DRM device
  63  * @maxX: max width for modes
  64  * @maxY: max height for modes
  65  *
  66  * LOCKING:
  67  * Caller must hold mode config lock.
  68  *
  69  * Based on @dev's mode_config layout, scan all the connectors and try to detect
  70  * modes on them.  Modes will first be added to the connector's probed_modes
  71  * list, then culled (based on validity and the @maxX, @maxY parameters) and
  72  * put into the normal modes list.
  73  *
  74  * Intended to be used either at bootup time or when major configuration
  75  * changes have occurred.
  76  *
  77  * FIXME: take into account monitor limits
  78  *
  79  * RETURNS:
  80  * Number of modes found on @connector.
  81  */
  82 int drm_helper_probe_single_connector_modes(struct drm_connector *connector,
  83                                             uint32_t maxX, uint32_t maxY)
  84 {
  85         struct drm_device *dev = connector->dev;
  86         struct drm_display_mode *mode, *t;
  87         struct drm_connector_helper_funcs *connector_funcs =
  88                 connector->helper_private;
  89         int count = 0;
  90         int mode_flags = 0;
  91
  92         DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", connector->base.id,
  93                         drm_get_connector_name(connector));
  94         /* set all modes to the unverified state */
  95         list_for_each_entry_safe(mode, t, &connector->modes, head)
  96                 mode->status = MODE_UNVERIFIED;
  97
  98         if (connector->force) {
  99                 if (connector->force == DRM_FORCE_ON)
 100                         connector->status = connector_status_connected;
 101                 else
 102                         connector->status = connector_status_disconnected;
 103                 if (connector->funcs->force)
 104                         connector->funcs->force(connector);
 105         } else {
 106                 connector->status = connector->funcs->detect(connector, true);
 107                 drm_kms_helper_poll_enable(dev);
 108         }
 109
 110         if (connector->status == connector_status_disconnected) {
 111                 DRM_DEBUG_KMS("[CONNECTOR:%d:%s] disconnected\n",
 112                         connector->base.id, drm_get_connector_name(connector));
 113                 drm_mode_connector_update_edid_property(connector, NULL);
 114                 goto prune;
 115         }
 116
 117         count = (*connector_funcs->get_modes)(connector);
 118         if (count == 0 && connector->status == connector_status_connected)
 119                 count = drm_add_modes_noedid(connector, 1024, 768);
 120         if (count == 0)
 121                 goto prune;
 122
 123         drm_mode_connector_list_update(connector);
 124
 125         if (maxX && maxY)
 126                 drm_mode_validate_size(dev, &connector->modes, maxX,
 127                                        maxY, 0);
 128
 129         if (connector->interlace_allowed)
 130                 mode_flags |= DRM_MODE_FLAG_INTERLACE;
 131         if (connector->doublescan_allowed)
 132                 mode_flags |= DRM_MODE_FLAG_DBLSCAN;
 133         drm_mode_validate_flag(connector, mode_flags);
 134
 135         list_for_each_entry_safe(mode, t, &connector->modes, head) {
 136                 if (mode->status == MODE_OK)
 137                         mode->status = connector_funcs->mode_valid(connector,
 138                                                                    mode);
 139         }
 140
 141 prune:
 142         drm_mode_prune_invalid(dev, &connector->modes, true);
 143
 144         if (list_empty(&connector->modes))
 145                 return 0;
 146
 147         drm_mode_sort(&connector->modes);
 148
 149         DRM_DEBUG_KMS("[CONNECTOR:%d:%s] probed modes :\n", connector->base.id,
 150                         drm_get_connector_name(connector));
 151         list_for_each_entry_safe(mode, t, &connector->modes, head) {
 152                 mode->vrefresh = drm_mode_vrefresh(mode);
 153
 154                 drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V);
 155                 drm_mode_debug_printmodeline(mode);
 156         }
 157
 158         return count;
 159 }
 160 EXPORT_SYMBOL(drm_helper_probe_single_connector_modes);
 161
 162 /**
 163  * drm_helper_encoder_in_use - check if a given encoder is in use
 164  * @encoder: encoder to check
 165  *
 166  * LOCKING:
 167  * Caller must hold mode config lock.
 168  *
 169  * Walk @encoders's DRM device's mode_config and see if it's in use.
 170  *
 171  * RETURNS:
 172  * True if @encoder is part of the mode_config, false otherwise.
 173  */
 174 bool drm_helper_encoder_in_use(struct drm_encoder *encoder)
 175 {
 176         struct drm_connector *connector;
 177         struct drm_device *dev = encoder->dev;
 178         list_for_each_entry(connector, &dev->mode_config.connector_list, head)
 179                 if (connector->encoder == encoder)
 180                         return true;
 181         return false;
 182 }
 183 EXPORT_SYMBOL(drm_helper_encoder_in_use);
 184
 185 /**
 186  * drm_helper_crtc_in_use - check if a given CRTC is in a mode_config
 187  * @crtc: CRTC to check
 188  *
 189  * LOCKING:
 190  * Caller must hold mode config lock.
 191  *
 192  * Walk @crtc's DRM device's mode_config and see if it's in use.
 193  *
 194  * RETURNS:
 195  * True if @crtc is part of the mode_config, false otherwise.
 196  */
 197 bool drm_helper_crtc_in_use(struct drm_crtc *crtc)
 198 {
 199         struct drm_encoder *encoder;
 200         struct drm_device *dev = crtc->dev;
 201         /* FIXME: Locking around list access? */
 202         list_for_each_entry(encoder, &dev->mode_config.encoder_list, head)
 203                 if (encoder->crtc == crtc && drm_helper_encoder_in_use(encoder))
 204                         return true;
 205         return false;
 206 }
 207 EXPORT_SYMBOL(drm_helper_crtc_in_use);
 208
 209 static void
 210 drm_encoder_disable(struct drm_encoder *encoder)
 211 {
 212         struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
 213
 214         if (encoder_funcs->disable)
 215                 (*encoder_funcs->disable)(encoder);
 216         else
 217                 (*encoder_funcs->dpms)(encoder, DRM_MODE_DPMS_OFF);
 218 }
 219
 220 /**
 221  * drm_helper_disable_unused_functions - disable unused objects
 222  * @dev: DRM device
 223  *
 224  * LOCKING:
 225  * Caller must hold mode config lock.
 226  *
 227  * If an connector or CRTC isn't part of @dev's mode_config, it can be disabled
 228  * by calling its dpms function, which should power it off.
 229  */
 230 void drm_helper_disable_unused_functions(struct drm_device *dev)
 231 {
 232         struct drm_encoder *encoder;
 233         struct drm_connector *connector;
 234         struct drm_crtc *crtc;
 235
 236         list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
 237                 if (!connector->encoder)
 238                         continue;
 239                 if (connector->status == connector_status_disconnected)
 240                         connector->encoder = NULL;
 241         }
 242
 243         list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
 244                 if (!drm_helper_encoder_in_use(encoder)) {
 245                         drm_encoder_disable(encoder);
 246                         /* disconnector encoder from any connector */
 247                         encoder->crtc = NULL;
 248                 }
 249         }
 250
 251         list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
 252                 struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
 253                 crtc->enabled = drm_helper_crtc_in_use(crtc);
 254                 if (!crtc->enabled) {
 255                         if (crtc_funcs->disable)
 256                                 (*crtc_funcs->disable)(crtc);
 257                         else
 258                                 (*crtc_funcs->dpms)(crtc, DRM_MODE_DPMS_OFF);
 259                         crtc->fb = NULL;
 260                 }
 261         }
 262 }
 263 EXPORT_SYMBOL(drm_helper_disable_unused_functions);
 264
 265 /**
 266  * drm_encoder_crtc_ok - can a given crtc drive a given encoder?
 267  * @encoder: encoder to test
 268  * @crtc: crtc to test
 269  *
 270  * Return false if @encoder can't be driven by @crtc, true otherwise.
 271  */
 272 static bool drm_encoder_crtc_ok(struct drm_encoder *encoder,
 273                                 struct drm_crtc *crtc)
 274 {
 275         struct drm_device *dev;
 276         struct drm_crtc *tmp;
 277         int crtc_mask = 1;
 278
 279         WARN(!crtc, "checking null crtc?\n");
 280
 281         dev = crtc->dev;
 282
 283         list_for_each_entry(tmp, &dev->mode_config.crtc_list, head) {
 284                 if (tmp == crtc)
 285                         break;
 286                 crtc_mask <<= 1;
 287         }
 288
 289         if (encoder->possible_crtcs & crtc_mask)
 290                 return true;
 291         return false;
 292 }
 293
 294 /*
 295  * Check the CRTC we're going to map each output to vs. its current
 296  * CRTC.  If they don't match, we have to disable the output and the CRTC
 297  * since the driver will have to re-route things.
 298  */
 299 static void
 300 drm_crtc_prepare_encoders(struct drm_device *dev)
 301 {
 302         struct drm_encoder_helper_funcs *encoder_funcs;
 303         struct drm_encoder *encoder;
 304
 305         list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
 306                 encoder_funcs = encoder->helper_private;
 307                 /* Disable unused encoders */
 308                 if (encoder->crtc == NULL)
 309                         drm_encoder_disable(encoder);
 310                 /* Disable encoders whose CRTC is about to change */
 311                 if (encoder_funcs->get_crtc &&
 312                     encoder->crtc != (*encoder_funcs->get_crtc)(encoder))
 313                         drm_encoder_disable(encoder);
 314         }
 315 }
 316
 317 /**
 318  * drm_crtc_set_mode - set a mode
 319  * @crtc: CRTC to program
 320  * @mode: mode to use
 321  * @x: width of mode
 322  * @y: height of mode
 323  *
 324  * LOCKING:
 325  * Caller must hold mode config lock.
 326  *
 327  * Try to set @mode on @crtc.  Give @crtc and its associated connectors a chance
 328  * to fixup or reject the mode prior to trying to set it.
 329  *
 330  * RETURNS:
 331  * True if the mode was set successfully, or false otherwise.
 332  */
 333 bool drm_crtc_helper_set_mode(struct drm_crtc *crtc,
 334                               struct drm_display_mode *mode,
 335                               int x, int y,
 336                               struct drm_framebuffer *old_fb)
 337 {
 338         struct drm_device *dev = crtc->dev;
 339         struct drm_display_mode *adjusted_mode, saved_mode, saved_hwmode;
 340         struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
 341         struct drm_encoder_helper_funcs *encoder_funcs;
 342         int saved_x, saved_y;
 343         struct drm_encoder *encoder;
 344         bool ret = true;
 345
 346         adjusted_mode = drm_mode_duplicate(dev, mode);
 347
 348         crtc->enabled = drm_helper_crtc_in_use(crtc);
 349
 350         if (!crtc->enabled)
 351                 return true;
 352
 353         saved_hwmode = crtc->hwmode;
 354         saved_mode = crtc->mode;
 355         saved_x = crtc->x;
 356         saved_y = crtc->y;
 357
 358         /* Update crtc values up front so the driver can rely on them for mode
 359          * setting.
 360          */
 361         crtc->mode = *mode;
 362         crtc->x = x;
 363         crtc->y = y;
 364
 365         /* Pass our mode to the connectors and the CRTC to give them a chance to
 366          * adjust it according to limitations or connector properties, and also
 367          * a chance to reject the mode entirely.
 368          */
 369         list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
 370
 371                 if (encoder->crtc != crtc)
 372                         continue;
 373                 encoder_funcs = encoder->helper_private;
 374                 if (!(ret = encoder_funcs->mode_fixup(encoder, mode,
 375                                                       adjusted_mode))) {
 376                         goto done;
 377                 }
 378         }
 379
 380         if (!(ret = crtc_funcs->mode_fixup(crtc, mode, adjusted_mode))) {
 381                 goto done;
 382         }
 383         DRM_DEBUG_KMS("[CRTC:%d]\n", crtc->base.id);
 384
 385         /* Prepare the encoders and CRTCs before setting the mode. */
 386         list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
 387
 388                 if (encoder->crtc != crtc)
 389                         continue;
 390                 encoder_funcs = encoder->helper_private;
 391                 /* Disable the encoders as the first thing we do. */
 392                 encoder_funcs->prepare(encoder);
 393         }
 394
 395         drm_crtc_prepare_encoders(dev);
 396
 397         crtc_funcs->prepare(crtc);
 398
 399         /* Set up the DPLL and any encoders state that needs to adjust or depend
 400          * on the DPLL.
 401          */
 402         ret = !crtc_funcs->mode_set(crtc, mode, adjusted_mode, x, y, old_fb);
 403         if (!ret)
 404             goto done;
 405
 406         list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
 407
 408                 if (encoder->crtc != crtc)
 409                         continue;
 410
 411                 DRM_DEBUG_KMS("[ENCODER:%d:%s] set [MODE:%d:%s]\n",
 412                         encoder->base.id, drm_get_encoder_name(encoder),
 413                         mode->base.id, mode->name);
 414                 encoder_funcs = encoder->helper_private;
 415                 encoder_funcs->mode_set(encoder, mode, adjusted_mode);
 416         }
 417
 418         /* Now enable the clocks, plane, pipe, and connectors that we set up. */
 419         crtc_funcs->commit(crtc);
 420
 421         list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
 422
 423                 if (encoder->crtc != crtc)
 424                         continue;
 425
 426                 encoder_funcs = encoder->helper_private;
 427                 encoder_funcs->commit(encoder);
 428
 429         }
 430
 431         /* Store real post-adjustment hardware mode. */
 432         crtc->hwmode = *adjusted_mode;
 433
 434         /* Calculate and store various constants which
 435          * are later needed by vblank and swap-completion
 436          * timestamping. They are derived from true hwmode.
 437          */
 438         drm_calc_timestamping_constants(crtc);
 439
 440         /* XXX free adjustedmode */
 441         drm_mode_destroy(dev, adjusted_mode);
 442         /* FIXME: add subpixel order */
 443 done:
 444         if (!ret) {
 445                 crtc->hwmode = saved_hwmode;
 446                 crtc->mode = saved_mode;
 447                 crtc->x = saved_x;
 448                 crtc->y = saved_y;
 449         }
 450
 451         return ret;
 452 }
 453 EXPORT_SYMBOL(drm_crtc_helper_set_mode);
 454
 455
 456 /**
 457  * drm_crtc_helper_set_config - set a new config from userspace
 458  * @crtc: CRTC to setup
 459  * @crtc_info: user provided configuration
 460  * @new_mode: new mode to set
 461  * @connector_set: set of connectors for the new config
 462  * @fb: new framebuffer
 463  *
 464  * LOCKING:
 465  * Caller must hold mode config lock.
 466  *
 467  * Setup a new configuration, provided by the user in @crtc_info, and enable
 468  * it.
 469  *
 470  * RETURNS:
 471  * Zero. (FIXME)
 472  */
 473 int drm_crtc_helper_set_config(struct drm_mode_set *set)
 474 {
 475         struct drm_device *dev;
 476         struct drm_crtc *save_crtcs, *new_crtc, *crtc;
 477         struct drm_encoder *save_encoders, *new_encoder, *encoder;
 478         struct drm_framebuffer *old_fb = NULL;
 479         bool mode_changed = false; /* if true do a full mode set */
 480         bool fb_changed = false; /* if true and !mode_changed just do a flip */
 481         struct drm_connector *save_connectors, *connector;
 482         int count = 0, ro, fail = 0;
 483         struct drm_crtc_helper_funcs *crtc_funcs;
 484         int ret = 0;
 485         int i;
 486
 487         DRM_DEBUG_KMS("\n");
 488
 489         if (!set)
 490                 return -EINVAL;
 491
 492         if (!set->crtc)
 493                 return -EINVAL;
 494
 495         if (!set->crtc->helper_private)
 496                 return -EINVAL;
 497
 498         crtc_funcs = set->crtc->helper_private;
 499
 500         if (!set->mode)
 501                 set->fb = NULL;
 502
 503         if (set->fb) {
 504                 DRM_DEBUG_KMS("[CRTC:%d] [FB:%d] #connectors=%d (x y) (%i %i)\n",
 505                                 set->crtc->base.id, set->fb->base.id,
 506                                 (int)set->num_connectors, set->x, set->y);
 507         } else {
 508                 DRM_DEBUG_KMS("[CRTC:%d] [NOFB]\n", set->crtc->base.id);
 509                 set->mode = NULL;
 510                 set->num_connectors = 0;
 511         }
 512
 513         dev = set->crtc->dev;
 514
 515         /* Allocate space for the backup of all (non-pointer) crtc, encoder and
 516          * connector data. */
 517         save_crtcs = kzalloc(dev->mode_config.num_crtc *
 518                              sizeof(struct drm_crtc), GFP_KERNEL);
 519         if (!save_crtcs)
 520                 return -ENOMEM;
 521
 522         save_encoders = kzalloc(dev->mode_config.num_encoder *
 523                                 sizeof(struct drm_encoder), GFP_KERNEL);
 524         if (!save_encoders) {
 525                 kfree(save_crtcs);
 526                 return -ENOMEM;
 527         }
 528
 529         save_connectors = kzalloc(dev->mode_config.num_connector *
 530                                 sizeof(struct drm_connector), GFP_KERNEL);
 531         if (!save_connectors) {
 532                 kfree(save_crtcs);
 533                 kfree(save_encoders);
 534                 return -ENOMEM;
 535         }
 536
 537         /* Copy data. Note that driver private data is not affected.
 538          * Should anything bad happen only the expected state is
 539          * restored, not the drivers personal bookkeeping.
 540          */
 541         count = 0;
 542         list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
 543                 save_crtcs[count++] = *crtc;
 544         }
 545
 546         count = 0;
 547         list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
 548                 save_encoders[count++] = *encoder;
 549         }
 550
 551         count = 0;
 552         list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
 553                 save_connectors[count++] = *connector;
 554         }
 555
 556         /* We should be able to check here if the fb has the same properties
 557          * and then just flip_or_move it */
 558         if (set->crtc->fb != set->fb) {
 559                 /* If we have no fb then treat it as a full mode set */
 560                 if (set->crtc->fb == NULL) {
 561                         DRM_DEBUG_KMS("crtc has no fb, full mode set\n");
 562                         mode_changed = true;
 563                 } else if (set->fb == NULL) {
 564                         mode_changed = true;
 565                 } else
 566                         fb_changed = true;
 567         }
 568
 569         if (set->x != set->crtc->x || set->y != set->crtc->y)
 570                 fb_changed = true;
 571
 572         if (set->mode && !drm_mode_equal(set->mode, &set->crtc->mode)) {
 573                 DRM_DEBUG_KMS("modes are different, full mode set\n");
 574                 drm_mode_debug_printmodeline(&set->crtc->mode);
 575                 drm_mode_debug_printmodeline(set->mode);
 576                 mode_changed = true;
 577         }
 578
 579         /* a) traverse passed in connector list and get encoders for them */
 580         count = 0;
 581         list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
 582                 struct drm_connector_helper_funcs *connector_funcs =
 583                         connector->helper_private;
 584                 new_encoder = connector->encoder;
 585                 for (ro = 0; ro < set->num_connectors; ro++) {
 586                         if (set->connectors[ro] == connector) {
 587                                 new_encoder = connector_funcs->best_encoder(connector);
 588                                 /* if we can't get an encoder for a connector
 589                                    we are setting now - then fail */
 590                                 if (new_encoder == NULL)
 591                                         /* don't break so fail path works correct */
 592                                         fail = 1;
 593                                 break;
 594                         }
 595                 }
 596
 597                 if (new_encoder != connector->encoder) {
 598                         DRM_DEBUG_KMS("encoder changed, full mode switch\n");
 599                         mode_changed = true;
 600                         /* If the encoder is reused for another connector, then
 601                          * the appropriate crtc will be set later.
 602                          */
 603                         if (connector->encoder)
 604                                 connector->encoder->crtc = NULL;
 605                         connector->encoder = new_encoder;
 606                 }
 607         }
 608
 609         if (fail) {
 610                 ret = -EINVAL;
 611                 goto fail;
 612         }
 613
 614         count = 0;
 615         list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
 616                 if (!connector->encoder)
 617                         continue;
 618
 619                 if (connector->encoder->crtc == set->crtc)
 620                         new_crtc = NULL;
 621                 else
 622                         new_crtc = connector->encoder->crtc;
 623
 624                 for (ro = 0; ro < set->num_connectors; ro++) {
 625                         if (set->connectors[ro] == connector)
 626                                 new_crtc = set->crtc;
 627                 }
 628
 629                 /* Make sure the new CRTC will work with the encoder */
 630                 if (new_crtc &&
 631                     !drm_encoder_crtc_ok(connector->encoder, new_crtc)) {
 632                         ret = -EINVAL;
 633                         goto fail;
 634                 }
 635                 if (new_crtc != connector->encoder->crtc) {
 636                         DRM_DEBUG_KMS("crtc changed, full mode switch\n");
 637                         mode_changed = true;
 638                         connector->encoder->crtc = new_crtc;
 639                 }
 640                 if (new_crtc) {
 641                         DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [CRTC:%d]\n",
 642                                 connector->base.id, drm_get_connector_name(connector),
 643                                 new_crtc->base.id);
 644                 } else {
 645                         DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [NOCRTC]\n",
 646                                 connector->base.id, drm_get_connector_name(connector));
 647                 }
 648         }
 649
 650         /* mode_set_base is not a required function */
 651         if (fb_changed && !crtc_funcs->mode_set_base)
 652                 mode_changed = true;
 653
 654         if (mode_changed) {
 655                 set->crtc->enabled = drm_helper_crtc_in_use(set->crtc);
 656                 if (set->crtc->enabled) {
 657                         DRM_DEBUG_KMS("attempting to set mode from"
 658                                         " userspace\n");
 659                         drm_mode_debug_printmodeline(set->mode);
 660                         old_fb = set->crtc->fb;
 661                         set->crtc->fb = set->fb;
 662                         if (!drm_crtc_helper_set_mode(set->crtc, set->mode,
 663                                                       set->x, set->y,
 664                                                       old_fb)) {
 665                                 DRM_ERROR("failed to set mode on [CRTC:%d]\n",
 666                                           set->crtc->base.id);
 667                                 set->crtc->fb = old_fb;
 668                                 ret = -EINVAL;
 669                                 goto fail;
 670                         }
 671                 }
 672                 drm_helper_disable_unused_functions(dev);
 673         } else if (fb_changed) {
 674                 set->crtc->x = set->x;
 675                 set->crtc->y = set->y;
 676
 677                 old_fb = set->crtc->fb;
 678                 if (set->crtc->fb != set->fb)
 679                         set->crtc->fb = set->fb;
 680                 ret = crtc_funcs->mode_set_base(set->crtc,
 681                                                 set->x, set->y, old_fb);
 682                 if (ret != 0) {
 683                         set->crtc->fb = old_fb;
 684                         goto fail;
 685                 }
 686         }
 687         DRM_DEBUG_KMS("Setting connector DPMS state to on\n");
 688         for (i = 0; i < set->num_connectors; i++) {
 689                 DRM_DEBUG_KMS("\t[CONNECTOR:%d:%s] set DPMS on\n", set->connectors[i]->base.id,
 690                               drm_get_connector_name(set->connectors[i]));
 691                 set->connectors[i]->dpms = DRM_MODE_DPMS_ON;
 692         }
 693
 694         kfree(save_connectors);
 695         kfree(save_encoders);
 696         kfree(save_crtcs);
 697         return 0;
 698
 699 fail:
 700         /* Restore all previous data. */
 701         count = 0;
 702         list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
 703                 *crtc = save_crtcs[count++];
 704         }
 705
 706         count = 0;
 707         list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
 708                 *encoder = save_encoders[count++];
 709         }
 710
 711         count = 0;
 712         list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
 713                 *connector = save_connectors[count++];
 714         }
 715
 716         kfree(save_connectors);
 717         kfree(save_encoders);
 718         kfree(save_crtcs);
 719         return ret;
 720 }
 721 EXPORT_SYMBOL(drm_crtc_helper_set_config);
 722
 723 static int drm_helper_choose_encoder_dpms(struct drm_encoder *encoder)
 724 {
 725         int dpms = DRM_MODE_DPMS_OFF;
 726         struct drm_connector *connector;
 727         struct drm_device *dev = encoder->dev;
 728
 729         list_for_each_entry(connector, &dev->mode_config.connector_list, head)
 730                 if (connector->encoder == encoder)
 731                         if (connector->dpms < dpms)
 732                                 dpms = connector->dpms;
 733         return dpms;
 734 }
 735
 736 static int drm_helper_choose_crtc_dpms(struct drm_crtc *crtc)
 737 {
 738         int dpms = DRM_MODE_DPMS_OFF;
 739         struct drm_connector *connector;
 740         struct drm_device *dev = crtc->dev;
 741
 742         list_for_each_entry(connector, &dev->mode_config.connector_list, head)
 743                 if (connector->encoder && connector->encoder->crtc == crtc)
 744                         if (connector->dpms < dpms)
 745                                 dpms = connector->dpms;
 746         return dpms;
 747 }
 748
 749 /**
 750  * drm_helper_connector_dpms
 751  * @connector affected connector
 752  * @mode DPMS mode
 753  *
 754  * Calls the low-level connector DPMS function, then
 755  * calls appropriate encoder and crtc DPMS functions as well
 756  */
 757 void drm_helper_connector_dpms(struct drm_connector *connector, int mode)
 758 {
 759         struct drm_encoder *encoder = connector->encoder;
 760         struct drm_crtc *crtc = encoder ? encoder->crtc : NULL;
 761         int old_dpms;
 762
 763         if (mode == connector->dpms)
 764                 return;
 765
 766         old_dpms = connector->dpms;
 767         connector->dpms = mode;
 768
 769         /* from off to on, do crtc then encoder */
 770         if (mode < old_dpms) {
 771                 if (crtc) {
 772                         struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
 773                         if (crtc_funcs->dpms)
 774                                 (*crtc_funcs->dpms) (crtc,
 775                                                      drm_helper_choose_crtc_dpms(crtc));
 776                 }
 777                 if (encoder) {
 778                         struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
 779                         if (encoder_funcs->dpms)
 780                                 (*encoder_funcs->dpms) (encoder,
 781                                                         drm_helper_choose_encoder_dpms(encoder));
 782                 }
 783         }
 784
 785         /* from on to off, do encoder then crtc */
 786         if (mode > old_dpms) {
 787                 if (encoder) {
 788                         struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
 789                         if (encoder_funcs->dpms)
 790                                 (*encoder_funcs->dpms) (encoder,
 791                                                         drm_helper_choose_encoder_dpms(encoder));
 792                 }
 793                 if (crtc) {
 794                         struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
 795                         if (crtc_funcs->dpms)
 796                                 (*crtc_funcs->dpms) (crtc,
 797                                                      drm_helper_choose_crtc_dpms(crtc));
 798                 }
 799         }
 800
 801         return;
 802 }
 803 EXPORT_SYMBOL(drm_helper_connector_dpms);
 804
 805 int drm_helper_mode_fill_fb_struct(struct drm_framebuffer *fb,
 806                                    struct drm_mode_fb_cmd *mode_cmd)
 807 {
 808         fb->width = mode_cmd->width;
 809         fb->height = mode_cmd->height;
 810         fb->pitch = mode_cmd->pitch;
 811         fb->bits_per_pixel = mode_cmd->bpp;
 812         fb->depth = mode_cmd->depth;
 813
 814         return 0;
 815 }
 816 EXPORT_SYMBOL(drm_helper_mode_fill_fb_struct);
 817
 818 int drm_helper_resume_force_mode(struct drm_device *dev)
 819 {
 820         struct drm_crtc *crtc;
 821         struct drm_encoder *encoder;
 822         struct drm_encoder_helper_funcs *encoder_funcs;
 823         struct drm_crtc_helper_funcs *crtc_funcs;
 824         int ret;
 825
 826         list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
 827
 828                 if (!crtc->enabled)
 829                         continue;
 830
 831                 ret = drm_crtc_helper_set_mode(crtc, &crtc->mode,
 832                                                crtc->x, crtc->y, crtc->fb);
 833
 834                 if (ret == false)
 835                         DRM_ERROR("failed to set mode on crtc %p\n", crtc);
 836
 837                 /* Turn off outputs that were already powered off */
 838                 if (drm_helper_choose_crtc_dpms(crtc)) {
 839                         list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
 840
 841                                 if(encoder->crtc != crtc)
 842                                         continue;
 843
 844                                 encoder_funcs = encoder->helper_private;
 845                                 if (encoder_funcs->dpms)
 846                                         (*encoder_funcs->dpms) (encoder,
 847                                                                 drm_helper_choose_encoder_dpms(encoder));
 848                         }
 849
 850                         crtc_funcs = crtc->helper_private;
 851                         if (crtc_funcs->dpms)
 852                                 (*crtc_funcs->dpms) (crtc,
 853                                                      drm_helper_choose_crtc_dpms(crtc));
 854                 }
 855         }
 856         /* disable the unused connectors while restoring the modesetting */
 857         drm_helper_disable_unused_functions(dev);
 858         return 0;
 859 }
 860 EXPORT_SYMBOL(drm_helper_resume_force_mode);
 861
 862 #define DRM_OUTPUT_POLL_PERIOD (10*HZ)
 863 static void output_poll_execute(struct work_struct *work)
 864 {
 865         struct delayed_work *delayed_work = to_delayed_work(work);
 866         struct drm_device *dev = container_of(delayed_work, struct drm_device, mode_config.output_poll_work);
 867         struct drm_connector *connector;
 868         enum drm_connector_status old_status;
 869         bool repoll = false, changed = false;
 870
 871         if (!drm_kms_helper_poll)
 872                 return;
 873
 874         mutex_lock(&dev->mode_config.mutex);
 875         list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
 876
 877                 /* if this is HPD or polled don't check it -
 878                    TV out for instance */
 879                 if (!connector->polled)
 880                         continue;
 881
 882                 else if (connector->polled & (DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT))
 883                         repoll = true;
 884
 885                 old_status = connector->status;
 886                 /* if we are connected and don't want to poll for disconnect
 887                    skip it */
 888                 if (old_status == connector_status_connected &&
 889                     !(connector->polled & DRM_CONNECTOR_POLL_DISCONNECT) &&
 890                     !(connector->polled & DRM_CONNECTOR_POLL_HPD))
 891                         continue;
 892
 893                 connector->status = connector->funcs->detect(connector, false);
 894                 DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %d to %d\n",
 895                               connector->base.id,
 896                               drm_get_connector_name(connector),
 897                               old_status, connector->status);
 898                 if (old_status != connector->status)
 899                         changed = true;
 900         }
 901
 902         mutex_unlock(&dev->mode_config.mutex);
 903
 904         if (changed) {
 905                 /* send a uevent + call fbdev */
 906                 drm_sysfs_hotplug_event(dev);
 907                 if (dev->mode_config.funcs->output_poll_changed)
 908                         dev->mode_config.funcs->output_poll_changed(dev);
 909         }
 910
 911         if (repoll)
 912                 queue_delayed_work(system_nrt_wq, delayed_work, DRM_OUTPUT_POLL_PERIOD);
 913 }
 914
 915 void drm_kms_helper_poll_disable(struct drm_device *dev)
 916 {
 917         if (!dev->mode_config.poll_enabled)
 918                 return;
 919         cancel_delayed_work_sync(&dev->mode_config.output_poll_work);
 920 }
 921 EXPORT_SYMBOL(drm_kms_helper_poll_disable);
 922
 923 void drm_kms_helper_poll_enable(struct drm_device *dev)
 924 {
 925         bool poll = false;
 926         struct drm_connector *connector;
 927
 928         if (!dev->mode_config.poll_enabled || !drm_kms_helper_poll)
 929                 return;
 930
 931         list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
 932                 if (connector->polled)
 933                         poll = true;
 934         }
 935
 936         if (poll)
 937                 queue_delayed_work(system_nrt_wq, &dev->mode_config.output_poll_work, DRM_OUTPUT_POLL_PERIOD);
 938 }
 939 EXPORT_SYMBOL(drm_kms_helper_poll_enable);
 940
 941 void drm_kms_helper_poll_init(struct drm_device *dev)
 942 {
 943         INIT_DELAYED_WORK(&dev->mode_config.output_poll_work, output_poll_execute);
 944         dev->mode_config.poll_enabled = true;
 945
 946         drm_kms_helper_poll_enable(dev);
 947 }
 948 EXPORT_SYMBOL(drm_kms_helper_poll_init);
 949
 950 void drm_kms_helper_poll_fini(struct drm_device *dev)
 951 {
 952         drm_kms_helper_poll_disable(dev);
 953 }
 954 EXPORT_SYMBOL(drm_kms_helper_poll_fini);
 955
 956 void drm_helper_hpd_irq_event(struct drm_device *dev)
 957 {
 958         if (!dev->mode_config.poll_enabled)
 959                 return;
 960
 961         /* kill timer and schedule immediate execution, this doesn't block */
 962         cancel_delayed_work(&dev->mode_config.output_poll_work);
 963         if (drm_kms_helper_poll)
 964                 queue_delayed_work(system_nrt_wq, &dev->mode_config.output_poll_work, 0);
 965 }
 966 EXPORT_SYMBOL(drm_helper_hpd_irq_event);