Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
[pandora-kernel.git] / drivers / dma / pl330.c
1 /*
2  * Copyright (c) 2012 Samsung Electronics Co., Ltd.
3  *              http://www.samsung.com
4  *
5  * Copyright (C) 2010 Samsung Electronics Co. Ltd.
6  *      Jaswinder Singh <jassi.brar@samsung.com>
7  *
8  * This program is free software; you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License as published by
10  * the Free Software Foundation; either version 2 of the License, or
11  * (at your option) any later version.
12  */
13
14 #include <linux/kernel.h>
15 #include <linux/io.h>
16 #include <linux/init.h>
17 #include <linux/slab.h>
18 #include <linux/module.h>
19 #include <linux/string.h>
20 #include <linux/delay.h>
21 #include <linux/interrupt.h>
22 #include <linux/dma-mapping.h>
23 #include <linux/dmaengine.h>
24 #include <linux/amba/bus.h>
25 #include <linux/amba/pl330.h>
26 #include <linux/pm_runtime.h>
27 #include <linux/scatterlist.h>
28 #include <linux/of.h>
29
30 #include "dmaengine.h"
31 #define PL330_MAX_CHAN          8
32 #define PL330_MAX_IRQS          32
33 #define PL330_MAX_PERI          32
34
35 enum pl330_srccachectrl {
36         SCCTRL0,        /* Noncacheable and nonbufferable */
37         SCCTRL1,        /* Bufferable only */
38         SCCTRL2,        /* Cacheable, but do not allocate */
39         SCCTRL3,        /* Cacheable and bufferable, but do not allocate */
40         SINVALID1,
41         SINVALID2,
42         SCCTRL6,        /* Cacheable write-through, allocate on reads only */
43         SCCTRL7,        /* Cacheable write-back, allocate on reads only */
44 };
45
46 enum pl330_dstcachectrl {
47         DCCTRL0,        /* Noncacheable and nonbufferable */
48         DCCTRL1,        /* Bufferable only */
49         DCCTRL2,        /* Cacheable, but do not allocate */
50         DCCTRL3,        /* Cacheable and bufferable, but do not allocate */
51         DINVALID1,      /* AWCACHE = 0x1000 */
52         DINVALID2,
53         DCCTRL6,        /* Cacheable write-through, allocate on writes only */
54         DCCTRL7,        /* Cacheable write-back, allocate on writes only */
55 };
56
57 enum pl330_byteswap {
58         SWAP_NO,
59         SWAP_2,
60         SWAP_4,
61         SWAP_8,
62         SWAP_16,
63 };
64
65 enum pl330_reqtype {
66         MEMTOMEM,
67         MEMTODEV,
68         DEVTOMEM,
69         DEVTODEV,
70 };
71
72 /* Register and Bit field Definitions */
73 #define DS                      0x0
74 #define DS_ST_STOP              0x0
75 #define DS_ST_EXEC              0x1
76 #define DS_ST_CMISS             0x2
77 #define DS_ST_UPDTPC            0x3
78 #define DS_ST_WFE               0x4
79 #define DS_ST_ATBRR             0x5
80 #define DS_ST_QBUSY             0x6
81 #define DS_ST_WFP               0x7
82 #define DS_ST_KILL              0x8
83 #define DS_ST_CMPLT             0x9
84 #define DS_ST_FLTCMP            0xe
85 #define DS_ST_FAULT             0xf
86
87 #define DPC                     0x4
88 #define INTEN                   0x20
89 #define ES                      0x24
90 #define INTSTATUS               0x28
91 #define INTCLR                  0x2c
92 #define FSM                     0x30
93 #define FSC                     0x34
94 #define FTM                     0x38
95
96 #define _FTC                    0x40
97 #define FTC(n)                  (_FTC + (n)*0x4)
98
99 #define _CS                     0x100
100 #define CS(n)                   (_CS + (n)*0x8)
101 #define CS_CNS                  (1 << 21)
102
103 #define _CPC                    0x104
104 #define CPC(n)                  (_CPC + (n)*0x8)
105
106 #define _SA                     0x400
107 #define SA(n)                   (_SA + (n)*0x20)
108
109 #define _DA                     0x404
110 #define DA(n)                   (_DA + (n)*0x20)
111
112 #define _CC                     0x408
113 #define CC(n)                   (_CC + (n)*0x20)
114
115 #define CC_SRCINC               (1 << 0)
116 #define CC_DSTINC               (1 << 14)
117 #define CC_SRCPRI               (1 << 8)
118 #define CC_DSTPRI               (1 << 22)
119 #define CC_SRCNS                (1 << 9)
120 #define CC_DSTNS                (1 << 23)
121 #define CC_SRCIA                (1 << 10)
122 #define CC_DSTIA                (1 << 24)
123 #define CC_SRCBRSTLEN_SHFT      4
124 #define CC_DSTBRSTLEN_SHFT      18
125 #define CC_SRCBRSTSIZE_SHFT     1
126 #define CC_DSTBRSTSIZE_SHFT     15
127 #define CC_SRCCCTRL_SHFT        11
128 #define CC_SRCCCTRL_MASK        0x7
129 #define CC_DSTCCTRL_SHFT        25
130 #define CC_DRCCCTRL_MASK        0x7
131 #define CC_SWAP_SHFT            28
132
133 #define _LC0                    0x40c
134 #define LC0(n)                  (_LC0 + (n)*0x20)
135
136 #define _LC1                    0x410
137 #define LC1(n)                  (_LC1 + (n)*0x20)
138
139 #define DBGSTATUS               0xd00
140 #define DBG_BUSY                (1 << 0)
141
142 #define DBGCMD                  0xd04
143 #define DBGINST0                0xd08
144 #define DBGINST1                0xd0c
145
146 #define CR0                     0xe00
147 #define CR1                     0xe04
148 #define CR2                     0xe08
149 #define CR3                     0xe0c
150 #define CR4                     0xe10
151 #define CRD                     0xe14
152
153 #define PERIPH_ID               0xfe0
154 #define PERIPH_REV_SHIFT        20
155 #define PERIPH_REV_MASK         0xf
156 #define PERIPH_REV_R0P0         0
157 #define PERIPH_REV_R1P0         1
158 #define PERIPH_REV_R1P1         2
159 #define PCELL_ID                0xff0
160
161 #define CR0_PERIPH_REQ_SET      (1 << 0)
162 #define CR0_BOOT_EN_SET         (1 << 1)
163 #define CR0_BOOT_MAN_NS         (1 << 2)
164 #define CR0_NUM_CHANS_SHIFT     4
165 #define CR0_NUM_CHANS_MASK      0x7
166 #define CR0_NUM_PERIPH_SHIFT    12
167 #define CR0_NUM_PERIPH_MASK     0x1f
168 #define CR0_NUM_EVENTS_SHIFT    17
169 #define CR0_NUM_EVENTS_MASK     0x1f
170
171 #define CR1_ICACHE_LEN_SHIFT    0
172 #define CR1_ICACHE_LEN_MASK     0x7
173 #define CR1_NUM_ICACHELINES_SHIFT       4
174 #define CR1_NUM_ICACHELINES_MASK        0xf
175
176 #define CRD_DATA_WIDTH_SHIFT    0
177 #define CRD_DATA_WIDTH_MASK     0x7
178 #define CRD_WR_CAP_SHIFT        4
179 #define CRD_WR_CAP_MASK         0x7
180 #define CRD_WR_Q_DEP_SHIFT      8
181 #define CRD_WR_Q_DEP_MASK       0xf
182 #define CRD_RD_CAP_SHIFT        12
183 #define CRD_RD_CAP_MASK         0x7
184 #define CRD_RD_Q_DEP_SHIFT      16
185 #define CRD_RD_Q_DEP_MASK       0xf
186 #define CRD_DATA_BUFF_SHIFT     20
187 #define CRD_DATA_BUFF_MASK      0x3ff
188
189 #define PART                    0x330
190 #define DESIGNER                0x41
191 #define REVISION                0x0
192 #define INTEG_CFG               0x0
193 #define PERIPH_ID_VAL           ((PART << 0) | (DESIGNER << 12))
194
195 #define PCELL_ID_VAL            0xb105f00d
196
197 #define PL330_STATE_STOPPED             (1 << 0)
198 #define PL330_STATE_EXECUTING           (1 << 1)
199 #define PL330_STATE_WFE                 (1 << 2)
200 #define PL330_STATE_FAULTING            (1 << 3)
201 #define PL330_STATE_COMPLETING          (1 << 4)
202 #define PL330_STATE_WFP                 (1 << 5)
203 #define PL330_STATE_KILLING             (1 << 6)
204 #define PL330_STATE_FAULT_COMPLETING    (1 << 7)
205 #define PL330_STATE_CACHEMISS           (1 << 8)
206 #define PL330_STATE_UPDTPC              (1 << 9)
207 #define PL330_STATE_ATBARRIER           (1 << 10)
208 #define PL330_STATE_QUEUEBUSY           (1 << 11)
209 #define PL330_STATE_INVALID             (1 << 15)
210
211 #define PL330_STABLE_STATES (PL330_STATE_STOPPED | PL330_STATE_EXECUTING \
212                                 | PL330_STATE_WFE | PL330_STATE_FAULTING)
213
214 #define CMD_DMAADDH             0x54
215 #define CMD_DMAEND              0x00
216 #define CMD_DMAFLUSHP           0x35
217 #define CMD_DMAGO               0xa0
218 #define CMD_DMALD               0x04
219 #define CMD_DMALDP              0x25
220 #define CMD_DMALP               0x20
221 #define CMD_DMALPEND            0x28
222 #define CMD_DMAKILL             0x01
223 #define CMD_DMAMOV              0xbc
224 #define CMD_DMANOP              0x18
225 #define CMD_DMARMB              0x12
226 #define CMD_DMASEV              0x34
227 #define CMD_DMAST               0x08
228 #define CMD_DMASTP              0x29
229 #define CMD_DMASTZ              0x0c
230 #define CMD_DMAWFE              0x36
231 #define CMD_DMAWFP              0x30
232 #define CMD_DMAWMB              0x13
233
234 #define SZ_DMAADDH              3
235 #define SZ_DMAEND               1
236 #define SZ_DMAFLUSHP            2
237 #define SZ_DMALD                1
238 #define SZ_DMALDP               2
239 #define SZ_DMALP                2
240 #define SZ_DMALPEND             2
241 #define SZ_DMAKILL              1
242 #define SZ_DMAMOV               6
243 #define SZ_DMANOP               1
244 #define SZ_DMARMB               1
245 #define SZ_DMASEV               2
246 #define SZ_DMAST                1
247 #define SZ_DMASTP               2
248 #define SZ_DMASTZ               1
249 #define SZ_DMAWFE               2
250 #define SZ_DMAWFP               2
251 #define SZ_DMAWMB               1
252 #define SZ_DMAGO                6
253
254 #define BRST_LEN(ccr)           ((((ccr) >> CC_SRCBRSTLEN_SHFT) & 0xf) + 1)
255 #define BRST_SIZE(ccr)          (1 << (((ccr) >> CC_SRCBRSTSIZE_SHFT) & 0x7))
256
257 #define BYTE_TO_BURST(b, ccr)   ((b) / BRST_SIZE(ccr) / BRST_LEN(ccr))
258 #define BURST_TO_BYTE(c, ccr)   ((c) * BRST_SIZE(ccr) * BRST_LEN(ccr))
259
260 /*
261  * With 256 bytes, we can do more than 2.5MB and 5MB xfers per req
262  * at 1byte/burst for P<->M and M<->M respectively.
263  * For typical scenario, at 1word/burst, 10MB and 20MB xfers per req
264  * should be enough for P<->M and M<->M respectively.
265  */
266 #define MCODE_BUFF_PER_REQ      256
267
268 /* If the _pl330_req is available to the client */
269 #define IS_FREE(req)    (*((u8 *)((req)->mc_cpu)) == CMD_DMAEND)
270
271 /* Use this _only_ to wait on transient states */
272 #define UNTIL(t, s)     while (!(_state(t) & (s))) cpu_relax();
273
274 #ifdef PL330_DEBUG_MCGEN
275 static unsigned cmd_line;
276 #define PL330_DBGCMD_DUMP(off, x...)    do { \
277                                                 printk("%x:", cmd_line); \
278                                                 printk(x); \
279                                                 cmd_line += off; \
280                                         } while (0)
281 #define PL330_DBGMC_START(addr)         (cmd_line = addr)
282 #else
283 #define PL330_DBGCMD_DUMP(off, x...)    do {} while (0)
284 #define PL330_DBGMC_START(addr)         do {} while (0)
285 #endif
286
287 /* The number of default descriptors */
288
289 #define NR_DEFAULT_DESC 16
290
291 /* Populated by the PL330 core driver for DMA API driver's info */
292 struct pl330_config {
293         u32     periph_id;
294         u32     pcell_id;
295 #define DMAC_MODE_NS    (1 << 0)
296         unsigned int    mode;
297         unsigned int    data_bus_width:10; /* In number of bits */
298         unsigned int    data_buf_dep:10;
299         unsigned int    num_chan:4;
300         unsigned int    num_peri:6;
301         u32             peri_ns;
302         unsigned int    num_events:6;
303         u32             irq_ns;
304 };
305
306 /* Handle to the DMAC provided to the PL330 core */
307 struct pl330_info {
308         /* Owning device */
309         struct device *dev;
310         /* Size of MicroCode buffers for each channel. */
311         unsigned mcbufsz;
312         /* ioremap'ed address of PL330 registers. */
313         void __iomem    *base;
314         /* Client can freely use it. */
315         void    *client_data;
316         /* PL330 core data, Client must not touch it. */
317         void    *pl330_data;
318         /* Populated by the PL330 core driver during pl330_add */
319         struct pl330_config     pcfg;
320         /*
321          * If the DMAC has some reset mechanism, then the
322          * client may want to provide pointer to the method.
323          */
324         void (*dmac_reset)(struct pl330_info *pi);
325 };
326
327 /**
328  * Request Configuration.
329  * The PL330 core does not modify this and uses the last
330  * working configuration if the request doesn't provide any.
331  *
332  * The Client may want to provide this info only for the
333  * first request and a request with new settings.
334  */
335 struct pl330_reqcfg {
336         /* Address Incrementing */
337         unsigned dst_inc:1;
338         unsigned src_inc:1;
339
340         /*
341          * For now, the SRC & DST protection levels
342          * and burst size/length are assumed same.
343          */
344         bool nonsecure;
345         bool privileged;
346         bool insnaccess;
347         unsigned brst_len:5;
348         unsigned brst_size:3; /* in power of 2 */
349
350         enum pl330_dstcachectrl dcctl;
351         enum pl330_srccachectrl scctl;
352         enum pl330_byteswap swap;
353         struct pl330_config *pcfg;
354 };
355
356 /*
357  * One cycle of DMAC operation.
358  * There may be more than one xfer in a request.
359  */
360 struct pl330_xfer {
361         u32 src_addr;
362         u32 dst_addr;
363         /* Size to xfer */
364         u32 bytes;
365         /*
366          * Pointer to next xfer in the list.
367          * The last xfer in the req must point to NULL.
368          */
369         struct pl330_xfer *next;
370 };
371
372 /* The xfer callbacks are made with one of these arguments. */
373 enum pl330_op_err {
374         /* The all xfers in the request were success. */
375         PL330_ERR_NONE,
376         /* If req aborted due to global error. */
377         PL330_ERR_ABORT,
378         /* If req failed due to problem with Channel. */
379         PL330_ERR_FAIL,
380 };
381
382 /* A request defining Scatter-Gather List ending with NULL xfer. */
383 struct pl330_req {
384         enum pl330_reqtype rqtype;
385         /* Index of peripheral for the xfer. */
386         unsigned peri:5;
387         /* Unique token for this xfer, set by the client. */
388         void *token;
389         /* Callback to be called after xfer. */
390         void (*xfer_cb)(void *token, enum pl330_op_err err);
391         /* If NULL, req will be done at last set parameters. */
392         struct pl330_reqcfg *cfg;
393         /* Pointer to first xfer in the request. */
394         struct pl330_xfer *x;
395         /* Hook to attach to DMAC's list of reqs with due callback */
396         struct list_head rqd;
397 };
398
399 /*
400  * To know the status of the channel and DMAC, the client
401  * provides a pointer to this structure. The PL330 core
402  * fills it with current information.
403  */
404 struct pl330_chanstatus {
405         /*
406          * If the DMAC engine halted due to some error,
407          * the client should remove-add DMAC.
408          */
409         bool dmac_halted;
410         /*
411          * If channel is halted due to some error,
412          * the client should ABORT/FLUSH and START the channel.
413          */
414         bool faulting;
415         /* Location of last load */
416         u32 src_addr;
417         /* Location of last store */
418         u32 dst_addr;
419         /*
420          * Pointer to the currently active req, NULL if channel is
421          * inactive, even though the requests may be present.
422          */
423         struct pl330_req *top_req;
424         /* Pointer to req waiting second in the queue if any. */
425         struct pl330_req *wait_req;
426 };
427
428 enum pl330_chan_op {
429         /* Start the channel */
430         PL330_OP_START,
431         /* Abort the active xfer */
432         PL330_OP_ABORT,
433         /* Stop xfer and flush queue */
434         PL330_OP_FLUSH,
435 };
436
437 struct _xfer_spec {
438         u32 ccr;
439         struct pl330_req *r;
440         struct pl330_xfer *x;
441 };
442
443 enum dmamov_dst {
444         SAR = 0,
445         CCR,
446         DAR,
447 };
448
449 enum pl330_dst {
450         SRC = 0,
451         DST,
452 };
453
454 enum pl330_cond {
455         SINGLE,
456         BURST,
457         ALWAYS,
458 };
459
460 struct _pl330_req {
461         u32 mc_bus;
462         void *mc_cpu;
463         /* Number of bytes taken to setup MC for the req */
464         u32 mc_len;
465         struct pl330_req *r;
466 };
467
468 /* ToBeDone for tasklet */
469 struct _pl330_tbd {
470         bool reset_dmac;
471         bool reset_mngr;
472         u8 reset_chan;
473 };
474
475 /* A DMAC Thread */
476 struct pl330_thread {
477         u8 id;
478         int ev;
479         /* If the channel is not yet acquired by any client */
480         bool free;
481         /* Parent DMAC */
482         struct pl330_dmac *dmac;
483         /* Only two at a time */
484         struct _pl330_req req[2];
485         /* Index of the last enqueued request */
486         unsigned lstenq;
487         /* Index of the last submitted request or -1 if the DMA is stopped */
488         int req_running;
489 };
490
491 enum pl330_dmac_state {
492         UNINIT,
493         INIT,
494         DYING,
495 };
496
497 /* A DMAC */
498 struct pl330_dmac {
499         spinlock_t              lock;
500         /* Holds list of reqs with due callbacks */
501         struct list_head        req_done;
502         /* Pointer to platform specific stuff */
503         struct pl330_info       *pinfo;
504         /* Maximum possible events/irqs */
505         int                     events[32];
506         /* BUS address of MicroCode buffer */
507         u32                     mcode_bus;
508         /* CPU address of MicroCode buffer */
509         void                    *mcode_cpu;
510         /* List of all Channel threads */
511         struct pl330_thread     *channels;
512         /* Pointer to the MANAGER thread */
513         struct pl330_thread     *manager;
514         /* To handle bad news in interrupt */
515         struct tasklet_struct   tasks;
516         struct _pl330_tbd       dmac_tbd;
517         /* State of DMAC operation */
518         enum pl330_dmac_state   state;
519 };
520
521 enum desc_status {
522         /* In the DMAC pool */
523         FREE,
524         /*
525          * Allocted to some channel during prep_xxx
526          * Also may be sitting on the work_list.
527          */
528         PREP,
529         /*
530          * Sitting on the work_list and already submitted
531          * to the PL330 core. Not more than two descriptors
532          * of a channel can be BUSY at any time.
533          */
534         BUSY,
535         /*
536          * Sitting on the channel work_list but xfer done
537          * by PL330 core
538          */
539         DONE,
540 };
541
542 struct dma_pl330_chan {
543         /* Schedule desc completion */
544         struct tasklet_struct task;
545
546         /* DMA-Engine Channel */
547         struct dma_chan chan;
548
549         /* List of to be xfered descriptors */
550         struct list_head work_list;
551
552         /* Pointer to the DMAC that manages this channel,
553          * NULL if the channel is available to be acquired.
554          * As the parent, this DMAC also provides descriptors
555          * to the channel.
556          */
557         struct dma_pl330_dmac *dmac;
558
559         /* To protect channel manipulation */
560         spinlock_t lock;
561
562         /* Token of a hardware channel thread of PL330 DMAC
563          * NULL if the channel is available to be acquired.
564          */
565         void *pl330_chid;
566
567         /* For D-to-M and M-to-D channels */
568         int burst_sz; /* the peripheral fifo width */
569         int burst_len; /* the number of burst */
570         dma_addr_t fifo_addr;
571
572         /* for cyclic capability */
573         bool cyclic;
574 };
575
576 struct dma_pl330_dmac {
577         struct pl330_info pif;
578
579         /* DMA-Engine Device */
580         struct dma_device ddma;
581
582         /* Pool of descriptors available for the DMAC's channels */
583         struct list_head desc_pool;
584         /* To protect desc_pool manipulation */
585         spinlock_t pool_lock;
586
587         /* Peripheral channels connected to this DMAC */
588         struct dma_pl330_chan *peripherals; /* keep at end */
589
590         struct clk *clk;
591 };
592
593 struct dma_pl330_desc {
594         /* To attach to a queue as child */
595         struct list_head node;
596
597         /* Descriptor for the DMA Engine API */
598         struct dma_async_tx_descriptor txd;
599
600         /* Xfer for PL330 core */
601         struct pl330_xfer px;
602
603         struct pl330_reqcfg rqcfg;
604         struct pl330_req req;
605
606         enum desc_status status;
607
608         /* The channel which currently holds this desc */
609         struct dma_pl330_chan *pchan;
610 };
611
612 static inline void _callback(struct pl330_req *r, enum pl330_op_err err)
613 {
614         if (r && r->xfer_cb)
615                 r->xfer_cb(r->token, err);
616 }
617
618 static inline bool _queue_empty(struct pl330_thread *thrd)
619 {
620         return (IS_FREE(&thrd->req[0]) && IS_FREE(&thrd->req[1]))
621                 ? true : false;
622 }
623
624 static inline bool _queue_full(struct pl330_thread *thrd)
625 {
626         return (IS_FREE(&thrd->req[0]) || IS_FREE(&thrd->req[1]))
627                 ? false : true;
628 }
629
630 static inline bool is_manager(struct pl330_thread *thrd)
631 {
632         struct pl330_dmac *pl330 = thrd->dmac;
633
634         /* MANAGER is indexed at the end */
635         if (thrd->id == pl330->pinfo->pcfg.num_chan)
636                 return true;
637         else
638                 return false;
639 }
640
641 /* If manager of the thread is in Non-Secure mode */
642 static inline bool _manager_ns(struct pl330_thread *thrd)
643 {
644         struct pl330_dmac *pl330 = thrd->dmac;
645
646         return (pl330->pinfo->pcfg.mode & DMAC_MODE_NS) ? true : false;
647 }
648
649 static inline u32 get_id(struct pl330_info *pi, u32 off)
650 {
651         void __iomem *regs = pi->base;
652         u32 id = 0;
653
654         id |= (readb(regs + off + 0x0) << 0);
655         id |= (readb(regs + off + 0x4) << 8);
656         id |= (readb(regs + off + 0x8) << 16);
657         id |= (readb(regs + off + 0xc) << 24);
658
659         return id;
660 }
661
662 static inline u32 get_revision(u32 periph_id)
663 {
664         return (periph_id >> PERIPH_REV_SHIFT) & PERIPH_REV_MASK;
665 }
666
667 static inline u32 _emit_ADDH(unsigned dry_run, u8 buf[],
668                 enum pl330_dst da, u16 val)
669 {
670         if (dry_run)
671                 return SZ_DMAADDH;
672
673         buf[0] = CMD_DMAADDH;
674         buf[0] |= (da << 1);
675         *((u16 *)&buf[1]) = val;
676
677         PL330_DBGCMD_DUMP(SZ_DMAADDH, "\tDMAADDH %s %u\n",
678                 da == 1 ? "DA" : "SA", val);
679
680         return SZ_DMAADDH;
681 }
682
683 static inline u32 _emit_END(unsigned dry_run, u8 buf[])
684 {
685         if (dry_run)
686                 return SZ_DMAEND;
687
688         buf[0] = CMD_DMAEND;
689
690         PL330_DBGCMD_DUMP(SZ_DMAEND, "\tDMAEND\n");
691
692         return SZ_DMAEND;
693 }
694
695 static inline u32 _emit_FLUSHP(unsigned dry_run, u8 buf[], u8 peri)
696 {
697         if (dry_run)
698                 return SZ_DMAFLUSHP;
699
700         buf[0] = CMD_DMAFLUSHP;
701
702         peri &= 0x1f;
703         peri <<= 3;
704         buf[1] = peri;
705
706         PL330_DBGCMD_DUMP(SZ_DMAFLUSHP, "\tDMAFLUSHP %u\n", peri >> 3);
707
708         return SZ_DMAFLUSHP;
709 }
710
711 static inline u32 _emit_LD(unsigned dry_run, u8 buf[],  enum pl330_cond cond)
712 {
713         if (dry_run)
714                 return SZ_DMALD;
715
716         buf[0] = CMD_DMALD;
717
718         if (cond == SINGLE)
719                 buf[0] |= (0 << 1) | (1 << 0);
720         else if (cond == BURST)
721                 buf[0] |= (1 << 1) | (1 << 0);
722
723         PL330_DBGCMD_DUMP(SZ_DMALD, "\tDMALD%c\n",
724                 cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
725
726         return SZ_DMALD;
727 }
728
729 static inline u32 _emit_LDP(unsigned dry_run, u8 buf[],
730                 enum pl330_cond cond, u8 peri)
731 {
732         if (dry_run)
733                 return SZ_DMALDP;
734
735         buf[0] = CMD_DMALDP;
736
737         if (cond == BURST)
738                 buf[0] |= (1 << 1);
739
740         peri &= 0x1f;
741         peri <<= 3;
742         buf[1] = peri;
743
744         PL330_DBGCMD_DUMP(SZ_DMALDP, "\tDMALDP%c %u\n",
745                 cond == SINGLE ? 'S' : 'B', peri >> 3);
746
747         return SZ_DMALDP;
748 }
749
750 static inline u32 _emit_LP(unsigned dry_run, u8 buf[],
751                 unsigned loop, u8 cnt)
752 {
753         if (dry_run)
754                 return SZ_DMALP;
755
756         buf[0] = CMD_DMALP;
757
758         if (loop)
759                 buf[0] |= (1 << 1);
760
761         cnt--; /* DMAC increments by 1 internally */
762         buf[1] = cnt;
763
764         PL330_DBGCMD_DUMP(SZ_DMALP, "\tDMALP_%c %u\n", loop ? '1' : '0', cnt);
765
766         return SZ_DMALP;
767 }
768
769 struct _arg_LPEND {
770         enum pl330_cond cond;
771         bool forever;
772         unsigned loop;
773         u8 bjump;
774 };
775
776 static inline u32 _emit_LPEND(unsigned dry_run, u8 buf[],
777                 const struct _arg_LPEND *arg)
778 {
779         enum pl330_cond cond = arg->cond;
780         bool forever = arg->forever;
781         unsigned loop = arg->loop;
782         u8 bjump = arg->bjump;
783
784         if (dry_run)
785                 return SZ_DMALPEND;
786
787         buf[0] = CMD_DMALPEND;
788
789         if (loop)
790                 buf[0] |= (1 << 2);
791
792         if (!forever)
793                 buf[0] |= (1 << 4);
794
795         if (cond == SINGLE)
796                 buf[0] |= (0 << 1) | (1 << 0);
797         else if (cond == BURST)
798                 buf[0] |= (1 << 1) | (1 << 0);
799
800         buf[1] = bjump;
801
802         PL330_DBGCMD_DUMP(SZ_DMALPEND, "\tDMALP%s%c_%c bjmpto_%x\n",
803                         forever ? "FE" : "END",
804                         cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'),
805                         loop ? '1' : '0',
806                         bjump);
807
808         return SZ_DMALPEND;
809 }
810
811 static inline u32 _emit_KILL(unsigned dry_run, u8 buf[])
812 {
813         if (dry_run)
814                 return SZ_DMAKILL;
815
816         buf[0] = CMD_DMAKILL;
817
818         return SZ_DMAKILL;
819 }
820
821 static inline u32 _emit_MOV(unsigned dry_run, u8 buf[],
822                 enum dmamov_dst dst, u32 val)
823 {
824         if (dry_run)
825                 return SZ_DMAMOV;
826
827         buf[0] = CMD_DMAMOV;
828         buf[1] = dst;
829         *((u32 *)&buf[2]) = val;
830
831         PL330_DBGCMD_DUMP(SZ_DMAMOV, "\tDMAMOV %s 0x%x\n",
832                 dst == SAR ? "SAR" : (dst == DAR ? "DAR" : "CCR"), val);
833
834         return SZ_DMAMOV;
835 }
836
837 static inline u32 _emit_NOP(unsigned dry_run, u8 buf[])
838 {
839         if (dry_run)
840                 return SZ_DMANOP;
841
842         buf[0] = CMD_DMANOP;
843
844         PL330_DBGCMD_DUMP(SZ_DMANOP, "\tDMANOP\n");
845
846         return SZ_DMANOP;
847 }
848
849 static inline u32 _emit_RMB(unsigned dry_run, u8 buf[])
850 {
851         if (dry_run)
852                 return SZ_DMARMB;
853
854         buf[0] = CMD_DMARMB;
855
856         PL330_DBGCMD_DUMP(SZ_DMARMB, "\tDMARMB\n");
857
858         return SZ_DMARMB;
859 }
860
861 static inline u32 _emit_SEV(unsigned dry_run, u8 buf[], u8 ev)
862 {
863         if (dry_run)
864                 return SZ_DMASEV;
865
866         buf[0] = CMD_DMASEV;
867
868         ev &= 0x1f;
869         ev <<= 3;
870         buf[1] = ev;
871
872         PL330_DBGCMD_DUMP(SZ_DMASEV, "\tDMASEV %u\n", ev >> 3);
873
874         return SZ_DMASEV;
875 }
876
877 static inline u32 _emit_ST(unsigned dry_run, u8 buf[], enum pl330_cond cond)
878 {
879         if (dry_run)
880                 return SZ_DMAST;
881
882         buf[0] = CMD_DMAST;
883
884         if (cond == SINGLE)
885                 buf[0] |= (0 << 1) | (1 << 0);
886         else if (cond == BURST)
887                 buf[0] |= (1 << 1) | (1 << 0);
888
889         PL330_DBGCMD_DUMP(SZ_DMAST, "\tDMAST%c\n",
890                 cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
891
892         return SZ_DMAST;
893 }
894
895 static inline u32 _emit_STP(unsigned dry_run, u8 buf[],
896                 enum pl330_cond cond, u8 peri)
897 {
898         if (dry_run)
899                 return SZ_DMASTP;
900
901         buf[0] = CMD_DMASTP;
902
903         if (cond == BURST)
904                 buf[0] |= (1 << 1);
905
906         peri &= 0x1f;
907         peri <<= 3;
908         buf[1] = peri;
909
910         PL330_DBGCMD_DUMP(SZ_DMASTP, "\tDMASTP%c %u\n",
911                 cond == SINGLE ? 'S' : 'B', peri >> 3);
912
913         return SZ_DMASTP;
914 }
915
916 static inline u32 _emit_STZ(unsigned dry_run, u8 buf[])
917 {
918         if (dry_run)
919                 return SZ_DMASTZ;
920
921         buf[0] = CMD_DMASTZ;
922
923         PL330_DBGCMD_DUMP(SZ_DMASTZ, "\tDMASTZ\n");
924
925         return SZ_DMASTZ;
926 }
927
928 static inline u32 _emit_WFE(unsigned dry_run, u8 buf[], u8 ev,
929                 unsigned invalidate)
930 {
931         if (dry_run)
932                 return SZ_DMAWFE;
933
934         buf[0] = CMD_DMAWFE;
935
936         ev &= 0x1f;
937         ev <<= 3;
938         buf[1] = ev;
939
940         if (invalidate)
941                 buf[1] |= (1 << 1);
942
943         PL330_DBGCMD_DUMP(SZ_DMAWFE, "\tDMAWFE %u%s\n",
944                 ev >> 3, invalidate ? ", I" : "");
945
946         return SZ_DMAWFE;
947 }
948
949 static inline u32 _emit_WFP(unsigned dry_run, u8 buf[],
950                 enum pl330_cond cond, u8 peri)
951 {
952         if (dry_run)
953                 return SZ_DMAWFP;
954
955         buf[0] = CMD_DMAWFP;
956
957         if (cond == SINGLE)
958                 buf[0] |= (0 << 1) | (0 << 0);
959         else if (cond == BURST)
960                 buf[0] |= (1 << 1) | (0 << 0);
961         else
962                 buf[0] |= (0 << 1) | (1 << 0);
963
964         peri &= 0x1f;
965         peri <<= 3;
966         buf[1] = peri;
967
968         PL330_DBGCMD_DUMP(SZ_DMAWFP, "\tDMAWFP%c %u\n",
969                 cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'P'), peri >> 3);
970
971         return SZ_DMAWFP;
972 }
973
974 static inline u32 _emit_WMB(unsigned dry_run, u8 buf[])
975 {
976         if (dry_run)
977                 return SZ_DMAWMB;
978
979         buf[0] = CMD_DMAWMB;
980
981         PL330_DBGCMD_DUMP(SZ_DMAWMB, "\tDMAWMB\n");
982
983         return SZ_DMAWMB;
984 }
985
986 struct _arg_GO {
987         u8 chan;
988         u32 addr;
989         unsigned ns;
990 };
991
992 static inline u32 _emit_GO(unsigned dry_run, u8 buf[],
993                 const struct _arg_GO *arg)
994 {
995         u8 chan = arg->chan;
996         u32 addr = arg->addr;
997         unsigned ns = arg->ns;
998
999         if (dry_run)
1000                 return SZ_DMAGO;
1001
1002         buf[0] = CMD_DMAGO;
1003         buf[0] |= (ns << 1);
1004
1005         buf[1] = chan & 0x7;
1006
1007         *((u32 *)&buf[2]) = addr;
1008
1009         return SZ_DMAGO;
1010 }
1011
1012 #define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
1013
1014 /* Returns Time-Out */
1015 static bool _until_dmac_idle(struct pl330_thread *thrd)
1016 {
1017         void __iomem *regs = thrd->dmac->pinfo->base;
1018         unsigned long loops = msecs_to_loops(5);
1019
1020         do {
1021                 /* Until Manager is Idle */
1022                 if (!(readl(regs + DBGSTATUS) & DBG_BUSY))
1023                         break;
1024
1025                 cpu_relax();
1026         } while (--loops);
1027
1028         if (!loops)
1029                 return true;
1030
1031         return false;
1032 }
1033
1034 static inline void _execute_DBGINSN(struct pl330_thread *thrd,
1035                 u8 insn[], bool as_manager)
1036 {
1037         void __iomem *regs = thrd->dmac->pinfo->base;
1038         u32 val;
1039
1040         val = (insn[0] << 16) | (insn[1] << 24);
1041         if (!as_manager) {
1042                 val |= (1 << 0);
1043                 val |= (thrd->id << 8); /* Channel Number */
1044         }
1045         writel(val, regs + DBGINST0);
1046
1047         val = *((u32 *)&insn[2]);
1048         writel(val, regs + DBGINST1);
1049
1050         /* If timed out due to halted state-machine */
1051         if (_until_dmac_idle(thrd)) {
1052                 dev_err(thrd->dmac->pinfo->dev, "DMAC halted!\n");
1053                 return;
1054         }
1055
1056         /* Get going */
1057         writel(0, regs + DBGCMD);
1058 }
1059
1060 /*
1061  * Mark a _pl330_req as free.
1062  * We do it by writing DMAEND as the first instruction
1063  * because no valid request is going to have DMAEND as
1064  * its first instruction to execute.
1065  */
1066 static void mark_free(struct pl330_thread *thrd, int idx)
1067 {
1068         struct _pl330_req *req = &thrd->req[idx];
1069
1070         _emit_END(0, req->mc_cpu);
1071         req->mc_len = 0;
1072
1073         thrd->req_running = -1;
1074 }
1075
1076 static inline u32 _state(struct pl330_thread *thrd)
1077 {
1078         void __iomem *regs = thrd->dmac->pinfo->base;
1079         u32 val;
1080
1081         if (is_manager(thrd))
1082                 val = readl(regs + DS) & 0xf;
1083         else
1084                 val = readl(regs + CS(thrd->id)) & 0xf;
1085
1086         switch (val) {
1087         case DS_ST_STOP:
1088                 return PL330_STATE_STOPPED;
1089         case DS_ST_EXEC:
1090                 return PL330_STATE_EXECUTING;
1091         case DS_ST_CMISS:
1092                 return PL330_STATE_CACHEMISS;
1093         case DS_ST_UPDTPC:
1094                 return PL330_STATE_UPDTPC;
1095         case DS_ST_WFE:
1096                 return PL330_STATE_WFE;
1097         case DS_ST_FAULT:
1098                 return PL330_STATE_FAULTING;
1099         case DS_ST_ATBRR:
1100                 if (is_manager(thrd))
1101                         return PL330_STATE_INVALID;
1102                 else
1103                         return PL330_STATE_ATBARRIER;
1104         case DS_ST_QBUSY:
1105                 if (is_manager(thrd))
1106                         return PL330_STATE_INVALID;
1107                 else
1108                         return PL330_STATE_QUEUEBUSY;
1109         case DS_ST_WFP:
1110                 if (is_manager(thrd))
1111                         return PL330_STATE_INVALID;
1112                 else
1113                         return PL330_STATE_WFP;
1114         case DS_ST_KILL:
1115                 if (is_manager(thrd))
1116                         return PL330_STATE_INVALID;
1117                 else
1118                         return PL330_STATE_KILLING;
1119         case DS_ST_CMPLT:
1120                 if (is_manager(thrd))
1121                         return PL330_STATE_INVALID;
1122                 else
1123                         return PL330_STATE_COMPLETING;
1124         case DS_ST_FLTCMP:
1125                 if (is_manager(thrd))
1126                         return PL330_STATE_INVALID;
1127                 else
1128                         return PL330_STATE_FAULT_COMPLETING;
1129         default:
1130                 return PL330_STATE_INVALID;
1131         }
1132 }
1133
1134 static void _stop(struct pl330_thread *thrd)
1135 {
1136         void __iomem *regs = thrd->dmac->pinfo->base;
1137         u8 insn[6] = {0, 0, 0, 0, 0, 0};
1138
1139         if (_state(thrd) == PL330_STATE_FAULT_COMPLETING)
1140                 UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
1141
1142         /* Return if nothing needs to be done */
1143         if (_state(thrd) == PL330_STATE_COMPLETING
1144                   || _state(thrd) == PL330_STATE_KILLING
1145                   || _state(thrd) == PL330_STATE_STOPPED)
1146                 return;
1147
1148         _emit_KILL(0, insn);
1149
1150         /* Stop generating interrupts for SEV */
1151         writel(readl(regs + INTEN) & ~(1 << thrd->ev), regs + INTEN);
1152
1153         _execute_DBGINSN(thrd, insn, is_manager(thrd));
1154 }
1155
1156 /* Start doing req 'idx' of thread 'thrd' */
1157 static bool _trigger(struct pl330_thread *thrd)
1158 {
1159         void __iomem *regs = thrd->dmac->pinfo->base;
1160         struct _pl330_req *req;
1161         struct pl330_req *r;
1162         struct _arg_GO go;
1163         unsigned ns;
1164         u8 insn[6] = {0, 0, 0, 0, 0, 0};
1165         int idx;
1166
1167         /* Return if already ACTIVE */
1168         if (_state(thrd) != PL330_STATE_STOPPED)
1169                 return true;
1170
1171         idx = 1 - thrd->lstenq;
1172         if (!IS_FREE(&thrd->req[idx]))
1173                 req = &thrd->req[idx];
1174         else {
1175                 idx = thrd->lstenq;
1176                 if (!IS_FREE(&thrd->req[idx]))
1177                         req = &thrd->req[idx];
1178                 else
1179                         req = NULL;
1180         }
1181
1182         /* Return if no request */
1183         if (!req || !req->r)
1184                 return true;
1185
1186         r = req->r;
1187
1188         if (r->cfg)
1189                 ns = r->cfg->nonsecure ? 1 : 0;
1190         else if (readl(regs + CS(thrd->id)) & CS_CNS)
1191                 ns = 1;
1192         else
1193                 ns = 0;
1194
1195         /* See 'Abort Sources' point-4 at Page 2-25 */
1196         if (_manager_ns(thrd) && !ns)
1197                 dev_info(thrd->dmac->pinfo->dev, "%s:%d Recipe for ABORT!\n",
1198                         __func__, __LINE__);
1199
1200         go.chan = thrd->id;
1201         go.addr = req->mc_bus;
1202         go.ns = ns;
1203         _emit_GO(0, insn, &go);
1204
1205         /* Set to generate interrupts for SEV */
1206         writel(readl(regs + INTEN) | (1 << thrd->ev), regs + INTEN);
1207
1208         /* Only manager can execute GO */
1209         _execute_DBGINSN(thrd, insn, true);
1210
1211         thrd->req_running = idx;
1212
1213         return true;
1214 }
1215
1216 static bool _start(struct pl330_thread *thrd)
1217 {
1218         switch (_state(thrd)) {
1219         case PL330_STATE_FAULT_COMPLETING:
1220                 UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
1221
1222                 if (_state(thrd) == PL330_STATE_KILLING)
1223                         UNTIL(thrd, PL330_STATE_STOPPED)
1224
1225         case PL330_STATE_FAULTING:
1226                 _stop(thrd);
1227
1228         case PL330_STATE_KILLING:
1229         case PL330_STATE_COMPLETING:
1230                 UNTIL(thrd, PL330_STATE_STOPPED)
1231
1232         case PL330_STATE_STOPPED:
1233                 return _trigger(thrd);
1234
1235         case PL330_STATE_WFP:
1236         case PL330_STATE_QUEUEBUSY:
1237         case PL330_STATE_ATBARRIER:
1238         case PL330_STATE_UPDTPC:
1239         case PL330_STATE_CACHEMISS:
1240         case PL330_STATE_EXECUTING:
1241                 return true;
1242
1243         case PL330_STATE_WFE: /* For RESUME, nothing yet */
1244         default:
1245                 return false;
1246         }
1247 }
1248
1249 static inline int _ldst_memtomem(unsigned dry_run, u8 buf[],
1250                 const struct _xfer_spec *pxs, int cyc)
1251 {
1252         int off = 0;
1253         struct pl330_config *pcfg = pxs->r->cfg->pcfg;
1254
1255         /* check lock-up free version */
1256         if (get_revision(pcfg->periph_id) >= PERIPH_REV_R1P0) {
1257                 while (cyc--) {
1258                         off += _emit_LD(dry_run, &buf[off], ALWAYS);
1259                         off += _emit_ST(dry_run, &buf[off], ALWAYS);
1260                 }
1261         } else {
1262                 while (cyc--) {
1263                         off += _emit_LD(dry_run, &buf[off], ALWAYS);
1264                         off += _emit_RMB(dry_run, &buf[off]);
1265                         off += _emit_ST(dry_run, &buf[off], ALWAYS);
1266                         off += _emit_WMB(dry_run, &buf[off]);
1267                 }
1268         }
1269
1270         return off;
1271 }
1272
1273 static inline int _ldst_devtomem(unsigned dry_run, u8 buf[],
1274                 const struct _xfer_spec *pxs, int cyc)
1275 {
1276         int off = 0;
1277
1278         while (cyc--) {
1279                 off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri);
1280                 off += _emit_LDP(dry_run, &buf[off], SINGLE, pxs->r->peri);
1281                 off += _emit_ST(dry_run, &buf[off], ALWAYS);
1282                 off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri);
1283         }
1284
1285         return off;
1286 }
1287
1288 static inline int _ldst_memtodev(unsigned dry_run, u8 buf[],
1289                 const struct _xfer_spec *pxs, int cyc)
1290 {
1291         int off = 0;
1292
1293         while (cyc--) {
1294                 off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri);
1295                 off += _emit_LD(dry_run, &buf[off], ALWAYS);
1296                 off += _emit_STP(dry_run, &buf[off], SINGLE, pxs->r->peri);
1297                 off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri);
1298         }
1299
1300         return off;
1301 }
1302
1303 static int _bursts(unsigned dry_run, u8 buf[],
1304                 const struct _xfer_spec *pxs, int cyc)
1305 {
1306         int off = 0;
1307
1308         switch (pxs->r->rqtype) {
1309         case MEMTODEV:
1310                 off += _ldst_memtodev(dry_run, &buf[off], pxs, cyc);
1311                 break;
1312         case DEVTOMEM:
1313                 off += _ldst_devtomem(dry_run, &buf[off], pxs, cyc);
1314                 break;
1315         case MEMTOMEM:
1316                 off += _ldst_memtomem(dry_run, &buf[off], pxs, cyc);
1317                 break;
1318         default:
1319                 off += 0x40000000; /* Scare off the Client */
1320                 break;
1321         }
1322
1323         return off;
1324 }
1325
1326 /* Returns bytes consumed and updates bursts */
1327 static inline int _loop(unsigned dry_run, u8 buf[],
1328                 unsigned long *bursts, const struct _xfer_spec *pxs)
1329 {
1330         int cyc, cycmax, szlp, szlpend, szbrst, off;
1331         unsigned lcnt0, lcnt1, ljmp0, ljmp1;
1332         struct _arg_LPEND lpend;
1333
1334         /* Max iterations possible in DMALP is 256 */
1335         if (*bursts >= 256*256) {
1336                 lcnt1 = 256;
1337                 lcnt0 = 256;
1338                 cyc = *bursts / lcnt1 / lcnt0;
1339         } else if (*bursts > 256) {
1340                 lcnt1 = 256;
1341                 lcnt0 = *bursts / lcnt1;
1342                 cyc = 1;
1343         } else {
1344                 lcnt1 = *bursts;
1345                 lcnt0 = 0;
1346                 cyc = 1;
1347         }
1348
1349         szlp = _emit_LP(1, buf, 0, 0);
1350         szbrst = _bursts(1, buf, pxs, 1);
1351
1352         lpend.cond = ALWAYS;
1353         lpend.forever = false;
1354         lpend.loop = 0;
1355         lpend.bjump = 0;
1356         szlpend = _emit_LPEND(1, buf, &lpend);
1357
1358         if (lcnt0) {
1359                 szlp *= 2;
1360                 szlpend *= 2;
1361         }
1362
1363         /*
1364          * Max bursts that we can unroll due to limit on the
1365          * size of backward jump that can be encoded in DMALPEND
1366          * which is 8-bits and hence 255
1367          */
1368         cycmax = (255 - (szlp + szlpend)) / szbrst;
1369
1370         cyc = (cycmax < cyc) ? cycmax : cyc;
1371
1372         off = 0;
1373
1374         if (lcnt0) {
1375                 off += _emit_LP(dry_run, &buf[off], 0, lcnt0);
1376                 ljmp0 = off;
1377         }
1378
1379         off += _emit_LP(dry_run, &buf[off], 1, lcnt1);
1380         ljmp1 = off;
1381
1382         off += _bursts(dry_run, &buf[off], pxs, cyc);
1383
1384         lpend.cond = ALWAYS;
1385         lpend.forever = false;
1386         lpend.loop = 1;
1387         lpend.bjump = off - ljmp1;
1388         off += _emit_LPEND(dry_run, &buf[off], &lpend);
1389
1390         if (lcnt0) {
1391                 lpend.cond = ALWAYS;
1392                 lpend.forever = false;
1393                 lpend.loop = 0;
1394                 lpend.bjump = off - ljmp0;
1395                 off += _emit_LPEND(dry_run, &buf[off], &lpend);
1396         }
1397
1398         *bursts = lcnt1 * cyc;
1399         if (lcnt0)
1400                 *bursts *= lcnt0;
1401
1402         return off;
1403 }
1404
1405 static inline int _setup_loops(unsigned dry_run, u8 buf[],
1406                 const struct _xfer_spec *pxs)
1407 {
1408         struct pl330_xfer *x = pxs->x;
1409         u32 ccr = pxs->ccr;
1410         unsigned long c, bursts = BYTE_TO_BURST(x->bytes, ccr);
1411         int off = 0;
1412
1413         while (bursts) {
1414                 c = bursts;
1415                 off += _loop(dry_run, &buf[off], &c, pxs);
1416                 bursts -= c;
1417         }
1418
1419         return off;
1420 }
1421
1422 static inline int _setup_xfer(unsigned dry_run, u8 buf[],
1423                 const struct _xfer_spec *pxs)
1424 {
1425         struct pl330_xfer *x = pxs->x;
1426         int off = 0;
1427
1428         /* DMAMOV SAR, x->src_addr */
1429         off += _emit_MOV(dry_run, &buf[off], SAR, x->src_addr);
1430         /* DMAMOV DAR, x->dst_addr */
1431         off += _emit_MOV(dry_run, &buf[off], DAR, x->dst_addr);
1432
1433         /* Setup Loop(s) */
1434         off += _setup_loops(dry_run, &buf[off], pxs);
1435
1436         return off;
1437 }
1438
1439 /*
1440  * A req is a sequence of one or more xfer units.
1441  * Returns the number of bytes taken to setup the MC for the req.
1442  */
1443 static int _setup_req(unsigned dry_run, struct pl330_thread *thrd,
1444                 unsigned index, struct _xfer_spec *pxs)
1445 {
1446         struct _pl330_req *req = &thrd->req[index];
1447         struct pl330_xfer *x;
1448         u8 *buf = req->mc_cpu;
1449         int off = 0;
1450
1451         PL330_DBGMC_START(req->mc_bus);
1452
1453         /* DMAMOV CCR, ccr */
1454         off += _emit_MOV(dry_run, &buf[off], CCR, pxs->ccr);
1455
1456         x = pxs->r->x;
1457         do {
1458                 /* Error if xfer length is not aligned at burst size */
1459                 if (x->bytes % (BRST_SIZE(pxs->ccr) * BRST_LEN(pxs->ccr)))
1460                         return -EINVAL;
1461
1462                 pxs->x = x;
1463                 off += _setup_xfer(dry_run, &buf[off], pxs);
1464
1465                 x = x->next;
1466         } while (x);
1467
1468         /* DMASEV peripheral/event */
1469         off += _emit_SEV(dry_run, &buf[off], thrd->ev);
1470         /* DMAEND */
1471         off += _emit_END(dry_run, &buf[off]);
1472
1473         return off;
1474 }
1475
1476 static inline u32 _prepare_ccr(const struct pl330_reqcfg *rqc)
1477 {
1478         u32 ccr = 0;
1479
1480         if (rqc->src_inc)
1481                 ccr |= CC_SRCINC;
1482
1483         if (rqc->dst_inc)
1484                 ccr |= CC_DSTINC;
1485
1486         /* We set same protection levels for Src and DST for now */
1487         if (rqc->privileged)
1488                 ccr |= CC_SRCPRI | CC_DSTPRI;
1489         if (rqc->nonsecure)
1490                 ccr |= CC_SRCNS | CC_DSTNS;
1491         if (rqc->insnaccess)
1492                 ccr |= CC_SRCIA | CC_DSTIA;
1493
1494         ccr |= (((rqc->brst_len - 1) & 0xf) << CC_SRCBRSTLEN_SHFT);
1495         ccr |= (((rqc->brst_len - 1) & 0xf) << CC_DSTBRSTLEN_SHFT);
1496
1497         ccr |= (rqc->brst_size << CC_SRCBRSTSIZE_SHFT);
1498         ccr |= (rqc->brst_size << CC_DSTBRSTSIZE_SHFT);
1499
1500         ccr |= (rqc->scctl << CC_SRCCCTRL_SHFT);
1501         ccr |= (rqc->dcctl << CC_DSTCCTRL_SHFT);
1502
1503         ccr |= (rqc->swap << CC_SWAP_SHFT);
1504
1505         return ccr;
1506 }
1507
1508 static inline bool _is_valid(u32 ccr)
1509 {
1510         enum pl330_dstcachectrl dcctl;
1511         enum pl330_srccachectrl scctl;
1512
1513         dcctl = (ccr >> CC_DSTCCTRL_SHFT) & CC_DRCCCTRL_MASK;
1514         scctl = (ccr >> CC_SRCCCTRL_SHFT) & CC_SRCCCTRL_MASK;
1515
1516         if (dcctl == DINVALID1 || dcctl == DINVALID2
1517                         || scctl == SINVALID1 || scctl == SINVALID2)
1518                 return false;
1519         else
1520                 return true;
1521 }
1522
1523 /*
1524  * Submit a list of xfers after which the client wants notification.
1525  * Client is not notified after each xfer unit, just once after all
1526  * xfer units are done or some error occurs.
1527  */
1528 static int pl330_submit_req(void *ch_id, struct pl330_req *r)
1529 {
1530         struct pl330_thread *thrd = ch_id;
1531         struct pl330_dmac *pl330;
1532         struct pl330_info *pi;
1533         struct _xfer_spec xs;
1534         unsigned long flags;
1535         void __iomem *regs;
1536         unsigned idx;
1537         u32 ccr;
1538         int ret = 0;
1539
1540         /* No Req or Unacquired Channel or DMAC */
1541         if (!r || !thrd || thrd->free)
1542                 return -EINVAL;
1543
1544         pl330 = thrd->dmac;
1545         pi = pl330->pinfo;
1546         regs = pi->base;
1547
1548         if (pl330->state == DYING
1549                 || pl330->dmac_tbd.reset_chan & (1 << thrd->id)) {
1550                 dev_info(thrd->dmac->pinfo->dev, "%s:%d\n",
1551                         __func__, __LINE__);
1552                 return -EAGAIN;
1553         }
1554
1555         /* If request for non-existing peripheral */
1556         if (r->rqtype != MEMTOMEM && r->peri >= pi->pcfg.num_peri) {
1557                 dev_info(thrd->dmac->pinfo->dev,
1558                                 "%s:%d Invalid peripheral(%u)!\n",
1559                                 __func__, __LINE__, r->peri);
1560                 return -EINVAL;
1561         }
1562
1563         spin_lock_irqsave(&pl330->lock, flags);
1564
1565         if (_queue_full(thrd)) {
1566                 ret = -EAGAIN;
1567                 goto xfer_exit;
1568         }
1569
1570         /* Prefer Secure Channel */
1571         if (!_manager_ns(thrd))
1572                 r->cfg->nonsecure = 0;
1573         else
1574                 r->cfg->nonsecure = 1;
1575
1576         /* Use last settings, if not provided */
1577         if (r->cfg)
1578                 ccr = _prepare_ccr(r->cfg);
1579         else
1580                 ccr = readl(regs + CC(thrd->id));
1581
1582         /* If this req doesn't have valid xfer settings */
1583         if (!_is_valid(ccr)) {
1584                 ret = -EINVAL;
1585                 dev_info(thrd->dmac->pinfo->dev, "%s:%d Invalid CCR(%x)!\n",
1586                         __func__, __LINE__, ccr);
1587                 goto xfer_exit;
1588         }
1589
1590         idx = IS_FREE(&thrd->req[0]) ? 0 : 1;
1591
1592         xs.ccr = ccr;
1593         xs.r = r;
1594
1595         /* First dry run to check if req is acceptable */
1596         ret = _setup_req(1, thrd, idx, &xs);
1597         if (ret < 0)
1598                 goto xfer_exit;
1599
1600         if (ret > pi->mcbufsz / 2) {
1601                 dev_info(thrd->dmac->pinfo->dev,
1602                         "%s:%d Trying increasing mcbufsz\n",
1603                                 __func__, __LINE__);
1604                 ret = -ENOMEM;
1605                 goto xfer_exit;
1606         }
1607
1608         /* Hook the request */
1609         thrd->lstenq = idx;
1610         thrd->req[idx].mc_len = _setup_req(0, thrd, idx, &xs);
1611         thrd->req[idx].r = r;
1612
1613         ret = 0;
1614
1615 xfer_exit:
1616         spin_unlock_irqrestore(&pl330->lock, flags);
1617
1618         return ret;
1619 }
1620
1621 static void pl330_dotask(unsigned long data)
1622 {
1623         struct pl330_dmac *pl330 = (struct pl330_dmac *) data;
1624         struct pl330_info *pi = pl330->pinfo;
1625         unsigned long flags;
1626         int i;
1627
1628         spin_lock_irqsave(&pl330->lock, flags);
1629
1630         /* The DMAC itself gone nuts */
1631         if (pl330->dmac_tbd.reset_dmac) {
1632                 pl330->state = DYING;
1633                 /* Reset the manager too */
1634                 pl330->dmac_tbd.reset_mngr = true;
1635                 /* Clear the reset flag */
1636                 pl330->dmac_tbd.reset_dmac = false;
1637         }
1638
1639         if (pl330->dmac_tbd.reset_mngr) {
1640                 _stop(pl330->manager);
1641                 /* Reset all channels */
1642                 pl330->dmac_tbd.reset_chan = (1 << pi->pcfg.num_chan) - 1;
1643                 /* Clear the reset flag */
1644                 pl330->dmac_tbd.reset_mngr = false;
1645         }
1646
1647         for (i = 0; i < pi->pcfg.num_chan; i++) {
1648
1649                 if (pl330->dmac_tbd.reset_chan & (1 << i)) {
1650                         struct pl330_thread *thrd = &pl330->channels[i];
1651                         void __iomem *regs = pi->base;
1652                         enum pl330_op_err err;
1653
1654                         _stop(thrd);
1655
1656                         if (readl(regs + FSC) & (1 << thrd->id))
1657                                 err = PL330_ERR_FAIL;
1658                         else
1659                                 err = PL330_ERR_ABORT;
1660
1661                         spin_unlock_irqrestore(&pl330->lock, flags);
1662
1663                         _callback(thrd->req[1 - thrd->lstenq].r, err);
1664                         _callback(thrd->req[thrd->lstenq].r, err);
1665
1666                         spin_lock_irqsave(&pl330->lock, flags);
1667
1668                         thrd->req[0].r = NULL;
1669                         thrd->req[1].r = NULL;
1670                         mark_free(thrd, 0);
1671                         mark_free(thrd, 1);
1672
1673                         /* Clear the reset flag */
1674                         pl330->dmac_tbd.reset_chan &= ~(1 << i);
1675                 }
1676         }
1677
1678         spin_unlock_irqrestore(&pl330->lock, flags);
1679
1680         return;
1681 }
1682
1683 /* Returns 1 if state was updated, 0 otherwise */
1684 static int pl330_update(const struct pl330_info *pi)
1685 {
1686         struct pl330_req *rqdone, *tmp;
1687         struct pl330_dmac *pl330;
1688         unsigned long flags;
1689         void __iomem *regs;
1690         u32 val;
1691         int id, ev, ret = 0;
1692
1693         if (!pi || !pi->pl330_data)
1694                 return 0;
1695
1696         regs = pi->base;
1697         pl330 = pi->pl330_data;
1698
1699         spin_lock_irqsave(&pl330->lock, flags);
1700
1701         val = readl(regs + FSM) & 0x1;
1702         if (val)
1703                 pl330->dmac_tbd.reset_mngr = true;
1704         else
1705                 pl330->dmac_tbd.reset_mngr = false;
1706
1707         val = readl(regs + FSC) & ((1 << pi->pcfg.num_chan) - 1);
1708         pl330->dmac_tbd.reset_chan |= val;
1709         if (val) {
1710                 int i = 0;
1711                 while (i < pi->pcfg.num_chan) {
1712                         if (val & (1 << i)) {
1713                                 dev_info(pi->dev,
1714                                         "Reset Channel-%d\t CS-%x FTC-%x\n",
1715                                                 i, readl(regs + CS(i)),
1716                                                 readl(regs + FTC(i)));
1717                                 _stop(&pl330->channels[i]);
1718                         }
1719                         i++;
1720                 }
1721         }
1722
1723         /* Check which event happened i.e, thread notified */
1724         val = readl(regs + ES);
1725         if (pi->pcfg.num_events < 32
1726                         && val & ~((1 << pi->pcfg.num_events) - 1)) {
1727                 pl330->dmac_tbd.reset_dmac = true;
1728                 dev_err(pi->dev, "%s:%d Unexpected!\n", __func__, __LINE__);
1729                 ret = 1;
1730                 goto updt_exit;
1731         }
1732
1733         for (ev = 0; ev < pi->pcfg.num_events; ev++) {
1734                 if (val & (1 << ev)) { /* Event occurred */
1735                         struct pl330_thread *thrd;
1736                         u32 inten = readl(regs + INTEN);
1737                         int active;
1738
1739                         /* Clear the event */
1740                         if (inten & (1 << ev))
1741                                 writel(1 << ev, regs + INTCLR);
1742
1743                         ret = 1;
1744
1745                         id = pl330->events[ev];
1746
1747                         thrd = &pl330->channels[id];
1748
1749                         active = thrd->req_running;
1750                         if (active == -1) /* Aborted */
1751                                 continue;
1752
1753                         /* Detach the req */
1754                         rqdone = thrd->req[active].r;
1755                         thrd->req[active].r = NULL;
1756
1757                         mark_free(thrd, active);
1758
1759                         /* Get going again ASAP */
1760                         _start(thrd);
1761
1762                         /* For now, just make a list of callbacks to be done */
1763                         list_add_tail(&rqdone->rqd, &pl330->req_done);
1764                 }
1765         }
1766
1767         /* Now that we are in no hurry, do the callbacks */
1768         list_for_each_entry_safe(rqdone, tmp, &pl330->req_done, rqd) {
1769                 list_del(&rqdone->rqd);
1770
1771                 spin_unlock_irqrestore(&pl330->lock, flags);
1772                 _callback(rqdone, PL330_ERR_NONE);
1773                 spin_lock_irqsave(&pl330->lock, flags);
1774         }
1775
1776 updt_exit:
1777         spin_unlock_irqrestore(&pl330->lock, flags);
1778
1779         if (pl330->dmac_tbd.reset_dmac
1780                         || pl330->dmac_tbd.reset_mngr
1781                         || pl330->dmac_tbd.reset_chan) {
1782                 ret = 1;
1783                 tasklet_schedule(&pl330->tasks);
1784         }
1785
1786         return ret;
1787 }
1788
1789 static int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op)
1790 {
1791         struct pl330_thread *thrd = ch_id;
1792         struct pl330_dmac *pl330;
1793         unsigned long flags;
1794         int ret = 0, active;
1795
1796         if (!thrd || thrd->free || thrd->dmac->state == DYING)
1797                 return -EINVAL;
1798
1799         pl330 = thrd->dmac;
1800         active = thrd->req_running;
1801
1802         spin_lock_irqsave(&pl330->lock, flags);
1803
1804         switch (op) {
1805         case PL330_OP_FLUSH:
1806                 /* Make sure the channel is stopped */
1807                 _stop(thrd);
1808
1809                 thrd->req[0].r = NULL;
1810                 thrd->req[1].r = NULL;
1811                 mark_free(thrd, 0);
1812                 mark_free(thrd, 1);
1813                 break;
1814
1815         case PL330_OP_ABORT:
1816                 /* Make sure the channel is stopped */
1817                 _stop(thrd);
1818
1819                 /* ABORT is only for the active req */
1820                 if (active == -1)
1821                         break;
1822
1823                 thrd->req[active].r = NULL;
1824                 mark_free(thrd, active);
1825
1826                 /* Start the next */
1827         case PL330_OP_START:
1828                 if ((active == -1) && !_start(thrd))
1829                         ret = -EIO;
1830                 break;
1831
1832         default:
1833                 ret = -EINVAL;
1834         }
1835
1836         spin_unlock_irqrestore(&pl330->lock, flags);
1837         return ret;
1838 }
1839
1840 /* Reserve an event */
1841 static inline int _alloc_event(struct pl330_thread *thrd)
1842 {
1843         struct pl330_dmac *pl330 = thrd->dmac;
1844         struct pl330_info *pi = pl330->pinfo;
1845         int ev;
1846
1847         for (ev = 0; ev < pi->pcfg.num_events; ev++)
1848                 if (pl330->events[ev] == -1) {
1849                         pl330->events[ev] = thrd->id;
1850                         return ev;
1851                 }
1852
1853         return -1;
1854 }
1855
1856 static bool _chan_ns(const struct pl330_info *pi, int i)
1857 {
1858         return pi->pcfg.irq_ns & (1 << i);
1859 }
1860
1861 /* Upon success, returns IdentityToken for the
1862  * allocated channel, NULL otherwise.
1863  */
1864 static void *pl330_request_channel(const struct pl330_info *pi)
1865 {
1866         struct pl330_thread *thrd = NULL;
1867         struct pl330_dmac *pl330;
1868         unsigned long flags;
1869         int chans, i;
1870
1871         if (!pi || !pi->pl330_data)
1872                 return NULL;
1873
1874         pl330 = pi->pl330_data;
1875
1876         if (pl330->state == DYING)
1877                 return NULL;
1878
1879         chans = pi->pcfg.num_chan;
1880
1881         spin_lock_irqsave(&pl330->lock, flags);
1882
1883         for (i = 0; i < chans; i++) {
1884                 thrd = &pl330->channels[i];
1885                 if ((thrd->free) && (!_manager_ns(thrd) ||
1886                                         _chan_ns(pi, i))) {
1887                         thrd->ev = _alloc_event(thrd);
1888                         if (thrd->ev >= 0) {
1889                                 thrd->free = false;
1890                                 thrd->lstenq = 1;
1891                                 thrd->req[0].r = NULL;
1892                                 mark_free(thrd, 0);
1893                                 thrd->req[1].r = NULL;
1894                                 mark_free(thrd, 1);
1895                                 break;
1896                         }
1897                 }
1898                 thrd = NULL;
1899         }
1900
1901         spin_unlock_irqrestore(&pl330->lock, flags);
1902
1903         return thrd;
1904 }
1905
1906 /* Release an event */
1907 static inline void _free_event(struct pl330_thread *thrd, int ev)
1908 {
1909         struct pl330_dmac *pl330 = thrd->dmac;
1910         struct pl330_info *pi = pl330->pinfo;
1911
1912         /* If the event is valid and was held by the thread */
1913         if (ev >= 0 && ev < pi->pcfg.num_events
1914                         && pl330->events[ev] == thrd->id)
1915                 pl330->events[ev] = -1;
1916 }
1917
1918 static void pl330_release_channel(void *ch_id)
1919 {
1920         struct pl330_thread *thrd = ch_id;
1921         struct pl330_dmac *pl330;
1922         unsigned long flags;
1923
1924         if (!thrd || thrd->free)
1925                 return;
1926
1927         _stop(thrd);
1928
1929         _callback(thrd->req[1 - thrd->lstenq].r, PL330_ERR_ABORT);
1930         _callback(thrd->req[thrd->lstenq].r, PL330_ERR_ABORT);
1931
1932         pl330 = thrd->dmac;
1933
1934         spin_lock_irqsave(&pl330->lock, flags);
1935         _free_event(thrd, thrd->ev);
1936         thrd->free = true;
1937         spin_unlock_irqrestore(&pl330->lock, flags);
1938 }
1939
1940 /* Initialize the structure for PL330 configuration, that can be used
1941  * by the client driver the make best use of the DMAC
1942  */
1943 static void read_dmac_config(struct pl330_info *pi)
1944 {
1945         void __iomem *regs = pi->base;
1946         u32 val;
1947
1948         val = readl(regs + CRD) >> CRD_DATA_WIDTH_SHIFT;
1949         val &= CRD_DATA_WIDTH_MASK;
1950         pi->pcfg.data_bus_width = 8 * (1 << val);
1951
1952         val = readl(regs + CRD) >> CRD_DATA_BUFF_SHIFT;
1953         val &= CRD_DATA_BUFF_MASK;
1954         pi->pcfg.data_buf_dep = val + 1;
1955
1956         val = readl(regs + CR0) >> CR0_NUM_CHANS_SHIFT;
1957         val &= CR0_NUM_CHANS_MASK;
1958         val += 1;
1959         pi->pcfg.num_chan = val;
1960
1961         val = readl(regs + CR0);
1962         if (val & CR0_PERIPH_REQ_SET) {
1963                 val = (val >> CR0_NUM_PERIPH_SHIFT) & CR0_NUM_PERIPH_MASK;
1964                 val += 1;
1965                 pi->pcfg.num_peri = val;
1966                 pi->pcfg.peri_ns = readl(regs + CR4);
1967         } else {
1968                 pi->pcfg.num_peri = 0;
1969         }
1970
1971         val = readl(regs + CR0);
1972         if (val & CR0_BOOT_MAN_NS)
1973                 pi->pcfg.mode |= DMAC_MODE_NS;
1974         else
1975                 pi->pcfg.mode &= ~DMAC_MODE_NS;
1976
1977         val = readl(regs + CR0) >> CR0_NUM_EVENTS_SHIFT;
1978         val &= CR0_NUM_EVENTS_MASK;
1979         val += 1;
1980         pi->pcfg.num_events = val;
1981
1982         pi->pcfg.irq_ns = readl(regs + CR3);
1983
1984         pi->pcfg.periph_id = get_id(pi, PERIPH_ID);
1985         pi->pcfg.pcell_id = get_id(pi, PCELL_ID);
1986 }
1987
1988 static inline void _reset_thread(struct pl330_thread *thrd)
1989 {
1990         struct pl330_dmac *pl330 = thrd->dmac;
1991         struct pl330_info *pi = pl330->pinfo;
1992
1993         thrd->req[0].mc_cpu = pl330->mcode_cpu
1994                                 + (thrd->id * pi->mcbufsz);
1995         thrd->req[0].mc_bus = pl330->mcode_bus
1996                                 + (thrd->id * pi->mcbufsz);
1997         thrd->req[0].r = NULL;
1998         mark_free(thrd, 0);
1999
2000         thrd->req[1].mc_cpu = thrd->req[0].mc_cpu
2001                                 + pi->mcbufsz / 2;
2002         thrd->req[1].mc_bus = thrd->req[0].mc_bus
2003                                 + pi->mcbufsz / 2;
2004         thrd->req[1].r = NULL;
2005         mark_free(thrd, 1);
2006 }
2007
2008 static int dmac_alloc_threads(struct pl330_dmac *pl330)
2009 {
2010         struct pl330_info *pi = pl330->pinfo;
2011         int chans = pi->pcfg.num_chan;
2012         struct pl330_thread *thrd;
2013         int i;
2014
2015         /* Allocate 1 Manager and 'chans' Channel threads */
2016         pl330->channels = kzalloc((1 + chans) * sizeof(*thrd),
2017                                         GFP_KERNEL);
2018         if (!pl330->channels)
2019                 return -ENOMEM;
2020
2021         /* Init Channel threads */
2022         for (i = 0; i < chans; i++) {
2023                 thrd = &pl330->channels[i];
2024                 thrd->id = i;
2025                 thrd->dmac = pl330;
2026                 _reset_thread(thrd);
2027                 thrd->free = true;
2028         }
2029
2030         /* MANAGER is indexed at the end */
2031         thrd = &pl330->channels[chans];
2032         thrd->id = chans;
2033         thrd->dmac = pl330;
2034         thrd->free = false;
2035         pl330->manager = thrd;
2036
2037         return 0;
2038 }
2039
2040 static int dmac_alloc_resources(struct pl330_dmac *pl330)
2041 {
2042         struct pl330_info *pi = pl330->pinfo;
2043         int chans = pi->pcfg.num_chan;
2044         int ret;
2045
2046         /*
2047          * Alloc MicroCode buffer for 'chans' Channel threads.
2048          * A channel's buffer offset is (Channel_Id * MCODE_BUFF_PERCHAN)
2049          */
2050         pl330->mcode_cpu = dma_alloc_coherent(pi->dev,
2051                                 chans * pi->mcbufsz,
2052                                 &pl330->mcode_bus, GFP_KERNEL);
2053         if (!pl330->mcode_cpu) {
2054                 dev_err(pi->dev, "%s:%d Can't allocate memory!\n",
2055                         __func__, __LINE__);
2056                 return -ENOMEM;
2057         }
2058
2059         ret = dmac_alloc_threads(pl330);
2060         if (ret) {
2061                 dev_err(pi->dev, "%s:%d Can't to create channels for DMAC!\n",
2062                         __func__, __LINE__);
2063                 dma_free_coherent(pi->dev,
2064                                 chans * pi->mcbufsz,
2065                                 pl330->mcode_cpu, pl330->mcode_bus);
2066                 return ret;
2067         }
2068
2069         return 0;
2070 }
2071
2072 static int pl330_add(struct pl330_info *pi)
2073 {
2074         struct pl330_dmac *pl330;
2075         void __iomem *regs;
2076         int i, ret;
2077
2078         if (!pi || !pi->dev)
2079                 return -EINVAL;
2080
2081         /* If already added */
2082         if (pi->pl330_data)
2083                 return -EINVAL;
2084
2085         /*
2086          * If the SoC can perform reset on the DMAC, then do it
2087          * before reading its configuration.
2088          */
2089         if (pi->dmac_reset)
2090                 pi->dmac_reset(pi);
2091
2092         regs = pi->base;
2093
2094         /* Check if we can handle this DMAC */
2095         if ((get_id(pi, PERIPH_ID) & 0xfffff) != PERIPH_ID_VAL
2096            || get_id(pi, PCELL_ID) != PCELL_ID_VAL) {
2097                 dev_err(pi->dev, "PERIPH_ID 0x%x, PCELL_ID 0x%x !\n",
2098                         get_id(pi, PERIPH_ID), get_id(pi, PCELL_ID));
2099                 return -EINVAL;
2100         }
2101
2102         /* Read the configuration of the DMAC */
2103         read_dmac_config(pi);
2104
2105         if (pi->pcfg.num_events == 0) {
2106                 dev_err(pi->dev, "%s:%d Can't work without events!\n",
2107                         __func__, __LINE__);
2108                 return -EINVAL;
2109         }
2110
2111         pl330 = kzalloc(sizeof(*pl330), GFP_KERNEL);
2112         if (!pl330) {
2113                 dev_err(pi->dev, "%s:%d Can't allocate memory!\n",
2114                         __func__, __LINE__);
2115                 return -ENOMEM;
2116         }
2117
2118         /* Assign the info structure and private data */
2119         pl330->pinfo = pi;
2120         pi->pl330_data = pl330;
2121
2122         spin_lock_init(&pl330->lock);
2123
2124         INIT_LIST_HEAD(&pl330->req_done);
2125
2126         /* Use default MC buffer size if not provided */
2127         if (!pi->mcbufsz)
2128                 pi->mcbufsz = MCODE_BUFF_PER_REQ * 2;
2129
2130         /* Mark all events as free */
2131         for (i = 0; i < pi->pcfg.num_events; i++)
2132                 pl330->events[i] = -1;
2133
2134         /* Allocate resources needed by the DMAC */
2135         ret = dmac_alloc_resources(pl330);
2136         if (ret) {
2137                 dev_err(pi->dev, "Unable to create channels for DMAC\n");
2138                 kfree(pl330);
2139                 return ret;
2140         }
2141
2142         tasklet_init(&pl330->tasks, pl330_dotask, (unsigned long) pl330);
2143
2144         pl330->state = INIT;
2145
2146         return 0;
2147 }
2148
2149 static int dmac_free_threads(struct pl330_dmac *pl330)
2150 {
2151         struct pl330_info *pi = pl330->pinfo;
2152         int chans = pi->pcfg.num_chan;
2153         struct pl330_thread *thrd;
2154         int i;
2155
2156         /* Release Channel threads */
2157         for (i = 0; i < chans; i++) {
2158                 thrd = &pl330->channels[i];
2159                 pl330_release_channel((void *)thrd);
2160         }
2161
2162         /* Free memory */
2163         kfree(pl330->channels);
2164
2165         return 0;
2166 }
2167
2168 static void dmac_free_resources(struct pl330_dmac *pl330)
2169 {
2170         struct pl330_info *pi = pl330->pinfo;
2171         int chans = pi->pcfg.num_chan;
2172
2173         dmac_free_threads(pl330);
2174
2175         dma_free_coherent(pi->dev, chans * pi->mcbufsz,
2176                                 pl330->mcode_cpu, pl330->mcode_bus);
2177 }
2178
2179 static void pl330_del(struct pl330_info *pi)
2180 {
2181         struct pl330_dmac *pl330;
2182
2183         if (!pi || !pi->pl330_data)
2184                 return;
2185
2186         pl330 = pi->pl330_data;
2187
2188         pl330->state = UNINIT;
2189
2190         tasklet_kill(&pl330->tasks);
2191
2192         /* Free DMAC resources */
2193         dmac_free_resources(pl330);
2194
2195         kfree(pl330);
2196         pi->pl330_data = NULL;
2197 }
2198
2199 /* forward declaration */
2200 static struct amba_driver pl330_driver;
2201
2202 static inline struct dma_pl330_chan *
2203 to_pchan(struct dma_chan *ch)
2204 {
2205         if (!ch)
2206                 return NULL;
2207
2208         return container_of(ch, struct dma_pl330_chan, chan);
2209 }
2210
2211 static inline struct dma_pl330_desc *
2212 to_desc(struct dma_async_tx_descriptor *tx)
2213 {
2214         return container_of(tx, struct dma_pl330_desc, txd);
2215 }
2216
2217 static inline void free_desc_list(struct list_head *list)
2218 {
2219         struct dma_pl330_dmac *pdmac;
2220         struct dma_pl330_desc *desc;
2221         struct dma_pl330_chan *pch = NULL;
2222         unsigned long flags;
2223
2224         /* Finish off the work list */
2225         list_for_each_entry(desc, list, node) {
2226                 dma_async_tx_callback callback;
2227                 void *param;
2228
2229                 /* All desc in a list belong to same channel */
2230                 pch = desc->pchan;
2231                 callback = desc->txd.callback;
2232                 param = desc->txd.callback_param;
2233
2234                 if (callback)
2235                         callback(param);
2236
2237                 desc->pchan = NULL;
2238         }
2239
2240         /* pch will be unset if list was empty */
2241         if (!pch)
2242                 return;
2243
2244         pdmac = pch->dmac;
2245
2246         spin_lock_irqsave(&pdmac->pool_lock, flags);
2247         list_splice_tail_init(list, &pdmac->desc_pool);
2248         spin_unlock_irqrestore(&pdmac->pool_lock, flags);
2249 }
2250
2251 static inline void handle_cyclic_desc_list(struct list_head *list)
2252 {
2253         struct dma_pl330_desc *desc;
2254         struct dma_pl330_chan *pch = NULL;
2255         unsigned long flags;
2256
2257         list_for_each_entry(desc, list, node) {
2258                 dma_async_tx_callback callback;
2259
2260                 /* Change status to reload it */
2261                 desc->status = PREP;
2262                 pch = desc->pchan;
2263                 callback = desc->txd.callback;
2264                 if (callback)
2265                         callback(desc->txd.callback_param);
2266         }
2267
2268         /* pch will be unset if list was empty */
2269         if (!pch)
2270                 return;
2271
2272         spin_lock_irqsave(&pch->lock, flags);
2273         list_splice_tail_init(list, &pch->work_list);
2274         spin_unlock_irqrestore(&pch->lock, flags);
2275 }
2276
2277 static inline void fill_queue(struct dma_pl330_chan *pch)
2278 {
2279         struct dma_pl330_desc *desc;
2280         int ret;
2281
2282         list_for_each_entry(desc, &pch->work_list, node) {
2283
2284                 /* If already submitted */
2285                 if (desc->status == BUSY)
2286                         break;
2287
2288                 ret = pl330_submit_req(pch->pl330_chid,
2289                                                 &desc->req);
2290                 if (!ret) {
2291                         desc->status = BUSY;
2292                         break;
2293                 } else if (ret == -EAGAIN) {
2294                         /* QFull or DMAC Dying */
2295                         break;
2296                 } else {
2297                         /* Unacceptable request */
2298                         desc->status = DONE;
2299                         dev_err(pch->dmac->pif.dev, "%s:%d Bad Desc(%d)\n",
2300                                         __func__, __LINE__, desc->txd.cookie);
2301                         tasklet_schedule(&pch->task);
2302                 }
2303         }
2304 }
2305
2306 static void pl330_tasklet(unsigned long data)
2307 {
2308         struct dma_pl330_chan *pch = (struct dma_pl330_chan *)data;
2309         struct dma_pl330_desc *desc, *_dt;
2310         unsigned long flags;
2311         LIST_HEAD(list);
2312
2313         spin_lock_irqsave(&pch->lock, flags);
2314
2315         /* Pick up ripe tomatoes */
2316         list_for_each_entry_safe(desc, _dt, &pch->work_list, node)
2317                 if (desc->status == DONE) {
2318                         if (!pch->cyclic)
2319                                 dma_cookie_complete(&desc->txd);
2320                         list_move_tail(&desc->node, &list);
2321                 }
2322
2323         /* Try to submit a req imm. next to the last completed cookie */
2324         fill_queue(pch);
2325
2326         /* Make sure the PL330 Channel thread is active */
2327         pl330_chan_ctrl(pch->pl330_chid, PL330_OP_START);
2328
2329         spin_unlock_irqrestore(&pch->lock, flags);
2330
2331         if (pch->cyclic)
2332                 handle_cyclic_desc_list(&list);
2333         else
2334                 free_desc_list(&list);
2335 }
2336
2337 static void dma_pl330_rqcb(void *token, enum pl330_op_err err)
2338 {
2339         struct dma_pl330_desc *desc = token;
2340         struct dma_pl330_chan *pch = desc->pchan;
2341         unsigned long flags;
2342
2343         /* If desc aborted */
2344         if (!pch)
2345                 return;
2346
2347         spin_lock_irqsave(&pch->lock, flags);
2348
2349         desc->status = DONE;
2350
2351         spin_unlock_irqrestore(&pch->lock, flags);
2352
2353         tasklet_schedule(&pch->task);
2354 }
2355
2356 bool pl330_filter(struct dma_chan *chan, void *param)
2357 {
2358         u8 *peri_id;
2359
2360         if (chan->device->dev->driver != &pl330_driver.drv)
2361                 return false;
2362
2363 #ifdef CONFIG_OF
2364         if (chan->device->dev->of_node) {
2365                 const __be32 *prop_value;
2366                 phandle phandle;
2367                 struct device_node *node;
2368
2369                 prop_value = ((struct property *)param)->value;
2370                 phandle = be32_to_cpup(prop_value++);
2371                 node = of_find_node_by_phandle(phandle);
2372                 return ((chan->private == node) &&
2373                                 (chan->chan_id == be32_to_cpup(prop_value)));
2374         }
2375 #endif
2376
2377         peri_id = chan->private;
2378         return *peri_id == (unsigned)param;
2379 }
2380 EXPORT_SYMBOL(pl330_filter);
2381
2382 static int pl330_alloc_chan_resources(struct dma_chan *chan)
2383 {
2384         struct dma_pl330_chan *pch = to_pchan(chan);
2385         struct dma_pl330_dmac *pdmac = pch->dmac;
2386         unsigned long flags;
2387
2388         spin_lock_irqsave(&pch->lock, flags);
2389
2390         dma_cookie_init(chan);
2391         pch->cyclic = false;
2392
2393         pch->pl330_chid = pl330_request_channel(&pdmac->pif);
2394         if (!pch->pl330_chid) {
2395                 spin_unlock_irqrestore(&pch->lock, flags);
2396                 return 0;
2397         }
2398
2399         tasklet_init(&pch->task, pl330_tasklet, (unsigned long) pch);
2400
2401         spin_unlock_irqrestore(&pch->lock, flags);
2402
2403         return 1;
2404 }
2405
2406 static int pl330_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, unsigned long arg)
2407 {
2408         struct dma_pl330_chan *pch = to_pchan(chan);
2409         struct dma_pl330_desc *desc, *_dt;
2410         unsigned long flags;
2411         struct dma_pl330_dmac *pdmac = pch->dmac;
2412         struct dma_slave_config *slave_config;
2413         LIST_HEAD(list);
2414
2415         switch (cmd) {
2416         case DMA_TERMINATE_ALL:
2417                 spin_lock_irqsave(&pch->lock, flags);
2418
2419                 /* FLUSH the PL330 Channel thread */
2420                 pl330_chan_ctrl(pch->pl330_chid, PL330_OP_FLUSH);
2421
2422                 /* Mark all desc done */
2423                 list_for_each_entry_safe(desc, _dt, &pch->work_list , node) {
2424                         desc->status = DONE;
2425                         list_move_tail(&desc->node, &list);
2426                 }
2427
2428                 list_splice_tail_init(&list, &pdmac->desc_pool);
2429                 spin_unlock_irqrestore(&pch->lock, flags);
2430                 break;
2431         case DMA_SLAVE_CONFIG:
2432                 slave_config = (struct dma_slave_config *)arg;
2433
2434                 if (slave_config->direction == DMA_MEM_TO_DEV) {
2435                         if (slave_config->dst_addr)
2436                                 pch->fifo_addr = slave_config->dst_addr;
2437                         if (slave_config->dst_addr_width)
2438                                 pch->burst_sz = __ffs(slave_config->dst_addr_width);
2439                         if (slave_config->dst_maxburst)
2440                                 pch->burst_len = slave_config->dst_maxburst;
2441                 } else if (slave_config->direction == DMA_DEV_TO_MEM) {
2442                         if (slave_config->src_addr)
2443                                 pch->fifo_addr = slave_config->src_addr;
2444                         if (slave_config->src_addr_width)
2445                                 pch->burst_sz = __ffs(slave_config->src_addr_width);
2446                         if (slave_config->src_maxburst)
2447                                 pch->burst_len = slave_config->src_maxburst;
2448                 }
2449                 break;
2450         default:
2451                 dev_err(pch->dmac->pif.dev, "Not supported command.\n");
2452                 return -ENXIO;
2453         }
2454
2455         return 0;
2456 }
2457
2458 static void pl330_free_chan_resources(struct dma_chan *chan)
2459 {
2460         struct dma_pl330_chan *pch = to_pchan(chan);
2461         unsigned long flags;
2462
2463         spin_lock_irqsave(&pch->lock, flags);
2464
2465         tasklet_kill(&pch->task);
2466
2467         pl330_release_channel(pch->pl330_chid);
2468         pch->pl330_chid = NULL;
2469
2470         if (pch->cyclic)
2471                 list_splice_tail_init(&pch->work_list, &pch->dmac->desc_pool);
2472
2473         spin_unlock_irqrestore(&pch->lock, flags);
2474 }
2475
2476 static enum dma_status
2477 pl330_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
2478                  struct dma_tx_state *txstate)
2479 {
2480         return dma_cookie_status(chan, cookie, txstate);
2481 }
2482
2483 static void pl330_issue_pending(struct dma_chan *chan)
2484 {
2485         pl330_tasklet((unsigned long) to_pchan(chan));
2486 }
2487
2488 /*
2489  * We returned the last one of the circular list of descriptor(s)
2490  * from prep_xxx, so the argument to submit corresponds to the last
2491  * descriptor of the list.
2492  */
2493 static dma_cookie_t pl330_tx_submit(struct dma_async_tx_descriptor *tx)
2494 {
2495         struct dma_pl330_desc *desc, *last = to_desc(tx);
2496         struct dma_pl330_chan *pch = to_pchan(tx->chan);
2497         dma_cookie_t cookie;
2498         unsigned long flags;
2499
2500         spin_lock_irqsave(&pch->lock, flags);
2501
2502         /* Assign cookies to all nodes */
2503         while (!list_empty(&last->node)) {
2504                 desc = list_entry(last->node.next, struct dma_pl330_desc, node);
2505
2506                 dma_cookie_assign(&desc->txd);
2507
2508                 list_move_tail(&desc->node, &pch->work_list);
2509         }
2510
2511         cookie = dma_cookie_assign(&last->txd);
2512         list_add_tail(&last->node, &pch->work_list);
2513         spin_unlock_irqrestore(&pch->lock, flags);
2514
2515         return cookie;
2516 }
2517
2518 static inline void _init_desc(struct dma_pl330_desc *desc)
2519 {
2520         desc->pchan = NULL;
2521         desc->req.x = &desc->px;
2522         desc->req.token = desc;
2523         desc->rqcfg.swap = SWAP_NO;
2524         desc->rqcfg.privileged = 0;
2525         desc->rqcfg.insnaccess = 0;
2526         desc->rqcfg.scctl = SCCTRL0;
2527         desc->rqcfg.dcctl = DCCTRL0;
2528         desc->req.cfg = &desc->rqcfg;
2529         desc->req.xfer_cb = dma_pl330_rqcb;
2530         desc->txd.tx_submit = pl330_tx_submit;
2531
2532         INIT_LIST_HEAD(&desc->node);
2533 }
2534
2535 /* Returns the number of descriptors added to the DMAC pool */
2536 static int add_desc(struct dma_pl330_dmac *pdmac, gfp_t flg, int count)
2537 {
2538         struct dma_pl330_desc *desc;
2539         unsigned long flags;
2540         int i;
2541
2542         if (!pdmac)
2543                 return 0;
2544
2545         desc = kmalloc(count * sizeof(*desc), flg);
2546         if (!desc)
2547                 return 0;
2548
2549         spin_lock_irqsave(&pdmac->pool_lock, flags);
2550
2551         for (i = 0; i < count; i++) {
2552                 _init_desc(&desc[i]);
2553                 list_add_tail(&desc[i].node, &pdmac->desc_pool);
2554         }
2555
2556         spin_unlock_irqrestore(&pdmac->pool_lock, flags);
2557
2558         return count;
2559 }
2560
2561 static struct dma_pl330_desc *
2562 pluck_desc(struct dma_pl330_dmac *pdmac)
2563 {
2564         struct dma_pl330_desc *desc = NULL;
2565         unsigned long flags;
2566
2567         if (!pdmac)
2568                 return NULL;
2569
2570         spin_lock_irqsave(&pdmac->pool_lock, flags);
2571
2572         if (!list_empty(&pdmac->desc_pool)) {
2573                 desc = list_entry(pdmac->desc_pool.next,
2574                                 struct dma_pl330_desc, node);
2575
2576                 list_del_init(&desc->node);
2577
2578                 desc->status = PREP;
2579                 desc->txd.callback = NULL;
2580         }
2581
2582         spin_unlock_irqrestore(&pdmac->pool_lock, flags);
2583
2584         return desc;
2585 }
2586
2587 static struct dma_pl330_desc *pl330_get_desc(struct dma_pl330_chan *pch)
2588 {
2589         struct dma_pl330_dmac *pdmac = pch->dmac;
2590         u8 *peri_id = pch->chan.private;
2591         struct dma_pl330_desc *desc;
2592
2593         /* Pluck one desc from the pool of DMAC */
2594         desc = pluck_desc(pdmac);
2595
2596         /* If the DMAC pool is empty, alloc new */
2597         if (!desc) {
2598                 if (!add_desc(pdmac, GFP_ATOMIC, 1))
2599                         return NULL;
2600
2601                 /* Try again */
2602                 desc = pluck_desc(pdmac);
2603                 if (!desc) {
2604                         dev_err(pch->dmac->pif.dev,
2605                                 "%s:%d ALERT!\n", __func__, __LINE__);
2606                         return NULL;
2607                 }
2608         }
2609
2610         /* Initialize the descriptor */
2611         desc->pchan = pch;
2612         desc->txd.cookie = 0;
2613         async_tx_ack(&desc->txd);
2614
2615         desc->req.peri = peri_id ? pch->chan.chan_id : 0;
2616         desc->rqcfg.pcfg = &pch->dmac->pif.pcfg;
2617
2618         dma_async_tx_descriptor_init(&desc->txd, &pch->chan);
2619
2620         return desc;
2621 }
2622
2623 static inline void fill_px(struct pl330_xfer *px,
2624                 dma_addr_t dst, dma_addr_t src, size_t len)
2625 {
2626         px->next = NULL;
2627         px->bytes = len;
2628         px->dst_addr = dst;
2629         px->src_addr = src;
2630 }
2631
2632 static struct dma_pl330_desc *
2633 __pl330_prep_dma_memcpy(struct dma_pl330_chan *pch, dma_addr_t dst,
2634                 dma_addr_t src, size_t len)
2635 {
2636         struct dma_pl330_desc *desc = pl330_get_desc(pch);
2637
2638         if (!desc) {
2639                 dev_err(pch->dmac->pif.dev, "%s:%d Unable to fetch desc\n",
2640                         __func__, __LINE__);
2641                 return NULL;
2642         }
2643
2644         /*
2645          * Ideally we should lookout for reqs bigger than
2646          * those that can be programmed with 256 bytes of
2647          * MC buffer, but considering a req size is seldom
2648          * going to be word-unaligned and more than 200MB,
2649          * we take it easy.
2650          * Also, should the limit is reached we'd rather
2651          * have the platform increase MC buffer size than
2652          * complicating this API driver.
2653          */
2654         fill_px(&desc->px, dst, src, len);
2655
2656         return desc;
2657 }
2658
2659 /* Call after fixing burst size */
2660 static inline int get_burst_len(struct dma_pl330_desc *desc, size_t len)
2661 {
2662         struct dma_pl330_chan *pch = desc->pchan;
2663         struct pl330_info *pi = &pch->dmac->pif;
2664         int burst_len;
2665
2666         burst_len = pi->pcfg.data_bus_width / 8;
2667         burst_len *= pi->pcfg.data_buf_dep;
2668         burst_len >>= desc->rqcfg.brst_size;
2669
2670         /* src/dst_burst_len can't be more than 16 */
2671         if (burst_len > 16)
2672                 burst_len = 16;
2673
2674         while (burst_len > 1) {
2675                 if (!(len % (burst_len << desc->rqcfg.brst_size)))
2676                         break;
2677                 burst_len--;
2678         }
2679
2680         return burst_len;
2681 }
2682
2683 static struct dma_async_tx_descriptor *pl330_prep_dma_cyclic(
2684                 struct dma_chan *chan, dma_addr_t dma_addr, size_t len,
2685                 size_t period_len, enum dma_transfer_direction direction,
2686                 void *context)
2687 {
2688         struct dma_pl330_desc *desc;
2689         struct dma_pl330_chan *pch = to_pchan(chan);
2690         dma_addr_t dst;
2691         dma_addr_t src;
2692
2693         desc = pl330_get_desc(pch);
2694         if (!desc) {
2695                 dev_err(pch->dmac->pif.dev, "%s:%d Unable to fetch desc\n",
2696                         __func__, __LINE__);
2697                 return NULL;
2698         }
2699
2700         switch (direction) {
2701         case DMA_MEM_TO_DEV:
2702                 desc->rqcfg.src_inc = 1;
2703                 desc->rqcfg.dst_inc = 0;
2704                 desc->req.rqtype = MEMTODEV;
2705                 src = dma_addr;
2706                 dst = pch->fifo_addr;
2707                 break;
2708         case DMA_DEV_TO_MEM:
2709                 desc->rqcfg.src_inc = 0;
2710                 desc->rqcfg.dst_inc = 1;
2711                 desc->req.rqtype = DEVTOMEM;
2712                 src = pch->fifo_addr;
2713                 dst = dma_addr;
2714                 break;
2715         default:
2716                 dev_err(pch->dmac->pif.dev, "%s:%d Invalid dma direction\n",
2717                 __func__, __LINE__);
2718                 return NULL;
2719         }
2720
2721         desc->rqcfg.brst_size = pch->burst_sz;
2722         desc->rqcfg.brst_len = 1;
2723
2724         pch->cyclic = true;
2725
2726         fill_px(&desc->px, dst, src, period_len);
2727
2728         return &desc->txd;
2729 }
2730
2731 static struct dma_async_tx_descriptor *
2732 pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst,
2733                 dma_addr_t src, size_t len, unsigned long flags)
2734 {
2735         struct dma_pl330_desc *desc;
2736         struct dma_pl330_chan *pch = to_pchan(chan);
2737         struct pl330_info *pi;
2738         int burst;
2739
2740         if (unlikely(!pch || !len))
2741                 return NULL;
2742
2743         pi = &pch->dmac->pif;
2744
2745         desc = __pl330_prep_dma_memcpy(pch, dst, src, len);
2746         if (!desc)
2747                 return NULL;
2748
2749         desc->rqcfg.src_inc = 1;
2750         desc->rqcfg.dst_inc = 1;
2751         desc->req.rqtype = MEMTOMEM;
2752
2753         /* Select max possible burst size */
2754         burst = pi->pcfg.data_bus_width / 8;
2755
2756         while (burst > 1) {
2757                 if (!(len % burst))
2758                         break;
2759                 burst /= 2;
2760         }
2761
2762         desc->rqcfg.brst_size = 0;
2763         while (burst != (1 << desc->rqcfg.brst_size))
2764                 desc->rqcfg.brst_size++;
2765
2766         desc->rqcfg.brst_len = get_burst_len(desc, len);
2767
2768         desc->txd.flags = flags;
2769
2770         return &desc->txd;
2771 }
2772
2773 static struct dma_async_tx_descriptor *
2774 pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
2775                 unsigned int sg_len, enum dma_transfer_direction direction,
2776                 unsigned long flg, void *context)
2777 {
2778         struct dma_pl330_desc *first, *desc = NULL;
2779         struct dma_pl330_chan *pch = to_pchan(chan);
2780         struct scatterlist *sg;
2781         unsigned long flags;
2782         int i;
2783         dma_addr_t addr;
2784
2785         if (unlikely(!pch || !sgl || !sg_len))
2786                 return NULL;
2787
2788         addr = pch->fifo_addr;
2789
2790         first = NULL;
2791
2792         for_each_sg(sgl, sg, sg_len, i) {
2793
2794                 desc = pl330_get_desc(pch);
2795                 if (!desc) {
2796                         struct dma_pl330_dmac *pdmac = pch->dmac;
2797
2798                         dev_err(pch->dmac->pif.dev,
2799                                 "%s:%d Unable to fetch desc\n",
2800                                 __func__, __LINE__);
2801                         if (!first)
2802                                 return NULL;
2803
2804                         spin_lock_irqsave(&pdmac->pool_lock, flags);
2805
2806                         while (!list_empty(&first->node)) {
2807                                 desc = list_entry(first->node.next,
2808                                                 struct dma_pl330_desc, node);
2809                                 list_move_tail(&desc->node, &pdmac->desc_pool);
2810                         }
2811
2812                         list_move_tail(&first->node, &pdmac->desc_pool);
2813
2814                         spin_unlock_irqrestore(&pdmac->pool_lock, flags);
2815
2816                         return NULL;
2817                 }
2818
2819                 if (!first)
2820                         first = desc;
2821                 else
2822                         list_add_tail(&desc->node, &first->node);
2823
2824                 if (direction == DMA_MEM_TO_DEV) {
2825                         desc->rqcfg.src_inc = 1;
2826                         desc->rqcfg.dst_inc = 0;
2827                         desc->req.rqtype = MEMTODEV;
2828                         fill_px(&desc->px,
2829                                 addr, sg_dma_address(sg), sg_dma_len(sg));
2830                 } else {
2831                         desc->rqcfg.src_inc = 0;
2832                         desc->rqcfg.dst_inc = 1;
2833                         desc->req.rqtype = DEVTOMEM;
2834                         fill_px(&desc->px,
2835                                 sg_dma_address(sg), addr, sg_dma_len(sg));
2836                 }
2837
2838                 desc->rqcfg.brst_size = pch->burst_sz;
2839                 desc->rqcfg.brst_len = 1;
2840         }
2841
2842         /* Return the last desc in the chain */
2843         desc->txd.flags = flg;
2844         return &desc->txd;
2845 }
2846
2847 static irqreturn_t pl330_irq_handler(int irq, void *data)
2848 {
2849         if (pl330_update(data))
2850                 return IRQ_HANDLED;
2851         else
2852                 return IRQ_NONE;
2853 }
2854
2855 static int __devinit
2856 pl330_probe(struct amba_device *adev, const struct amba_id *id)
2857 {
2858         struct dma_pl330_platdata *pdat;
2859         struct dma_pl330_dmac *pdmac;
2860         struct dma_pl330_chan *pch;
2861         struct pl330_info *pi;
2862         struct dma_device *pd;
2863         struct resource *res;
2864         int i, ret, irq;
2865         int num_chan;
2866
2867         pdat = adev->dev.platform_data;
2868
2869         /* Allocate a new DMAC and its Channels */
2870         pdmac = kzalloc(sizeof(*pdmac), GFP_KERNEL);
2871         if (!pdmac) {
2872                 dev_err(&adev->dev, "unable to allocate mem\n");
2873                 return -ENOMEM;
2874         }
2875
2876         pi = &pdmac->pif;
2877         pi->dev = &adev->dev;
2878         pi->pl330_data = NULL;
2879         pi->mcbufsz = pdat ? pdat->mcbuf_sz : 0;
2880
2881         res = &adev->res;
2882         request_mem_region(res->start, resource_size(res), "dma-pl330");
2883
2884         pi->base = ioremap(res->start, resource_size(res));
2885         if (!pi->base) {
2886                 ret = -ENXIO;
2887                 goto probe_err1;
2888         }
2889
2890         pdmac->clk = clk_get(&adev->dev, "dma");
2891         if (IS_ERR(pdmac->clk)) {
2892                 dev_err(&adev->dev, "Cannot get operation clock.\n");
2893                 ret = -EINVAL;
2894                 goto probe_err2;
2895         }
2896
2897         amba_set_drvdata(adev, pdmac);
2898
2899 #ifndef CONFIG_PM_RUNTIME
2900         /* enable dma clk */
2901         clk_enable(pdmac->clk);
2902 #endif
2903
2904         irq = adev->irq[0];
2905         ret = request_irq(irq, pl330_irq_handler, 0,
2906                         dev_name(&adev->dev), pi);
2907         if (ret)
2908                 goto probe_err3;
2909
2910         ret = pl330_add(pi);
2911         if (ret)
2912                 goto probe_err4;
2913
2914         INIT_LIST_HEAD(&pdmac->desc_pool);
2915         spin_lock_init(&pdmac->pool_lock);
2916
2917         /* Create a descriptor pool of default size */
2918         if (!add_desc(pdmac, GFP_KERNEL, NR_DEFAULT_DESC))
2919                 dev_warn(&adev->dev, "unable to allocate desc\n");
2920
2921         pd = &pdmac->ddma;
2922         INIT_LIST_HEAD(&pd->channels);
2923
2924         /* Initialize channel parameters */
2925         if (pdat)
2926                 num_chan = max_t(int, pdat->nr_valid_peri, pi->pcfg.num_chan);
2927         else
2928                 num_chan = max_t(int, pi->pcfg.num_peri, pi->pcfg.num_chan);
2929
2930         pdmac->peripherals = kzalloc(num_chan * sizeof(*pch), GFP_KERNEL);
2931
2932         for (i = 0; i < num_chan; i++) {
2933                 pch = &pdmac->peripherals[i];
2934                 if (!adev->dev.of_node)
2935                         pch->chan.private = pdat ? &pdat->peri_id[i] : NULL;
2936                 else
2937                         pch->chan.private = adev->dev.of_node;
2938
2939                 INIT_LIST_HEAD(&pch->work_list);
2940                 spin_lock_init(&pch->lock);
2941                 pch->pl330_chid = NULL;
2942                 pch->chan.device = pd;
2943                 pch->dmac = pdmac;
2944
2945                 /* Add the channel to the DMAC list */
2946                 list_add_tail(&pch->chan.device_node, &pd->channels);
2947         }
2948
2949         pd->dev = &adev->dev;
2950         if (pdat) {
2951                 pd->cap_mask = pdat->cap_mask;
2952         } else {
2953                 dma_cap_set(DMA_MEMCPY, pd->cap_mask);
2954                 if (pi->pcfg.num_peri) {
2955                         dma_cap_set(DMA_SLAVE, pd->cap_mask);
2956                         dma_cap_set(DMA_CYCLIC, pd->cap_mask);
2957                 }
2958         }
2959
2960         pd->device_alloc_chan_resources = pl330_alloc_chan_resources;
2961         pd->device_free_chan_resources = pl330_free_chan_resources;
2962         pd->device_prep_dma_memcpy = pl330_prep_dma_memcpy;
2963         pd->device_prep_dma_cyclic = pl330_prep_dma_cyclic;
2964         pd->device_tx_status = pl330_tx_status;
2965         pd->device_prep_slave_sg = pl330_prep_slave_sg;
2966         pd->device_control = pl330_control;
2967         pd->device_issue_pending = pl330_issue_pending;
2968
2969         ret = dma_async_device_register(pd);
2970         if (ret) {
2971                 dev_err(&adev->dev, "unable to register DMAC\n");
2972                 goto probe_err5;
2973         }
2974
2975         dev_info(&adev->dev,
2976                 "Loaded driver for PL330 DMAC-%d\n", adev->periphid);
2977         dev_info(&adev->dev,
2978                 "\tDBUFF-%ux%ubytes Num_Chans-%u Num_Peri-%u Num_Events-%u\n",
2979                 pi->pcfg.data_buf_dep,
2980                 pi->pcfg.data_bus_width / 8, pi->pcfg.num_chan,
2981                 pi->pcfg.num_peri, pi->pcfg.num_events);
2982
2983         return 0;
2984
2985 probe_err5:
2986         pl330_del(pi);
2987 probe_err4:
2988         free_irq(irq, pi);
2989 probe_err3:
2990 #ifndef CONFIG_PM_RUNTIME
2991         clk_disable(pdmac->clk);
2992 #endif
2993         clk_put(pdmac->clk);
2994 probe_err2:
2995         iounmap(pi->base);
2996 probe_err1:
2997         release_mem_region(res->start, resource_size(res));
2998         kfree(pdmac);
2999
3000         return ret;
3001 }
3002
3003 static int __devexit pl330_remove(struct amba_device *adev)
3004 {
3005         struct dma_pl330_dmac *pdmac = amba_get_drvdata(adev);
3006         struct dma_pl330_chan *pch, *_p;
3007         struct pl330_info *pi;
3008         struct resource *res;
3009         int irq;
3010
3011         if (!pdmac)
3012                 return 0;
3013
3014         amba_set_drvdata(adev, NULL);
3015
3016         /* Idle the DMAC */
3017         list_for_each_entry_safe(pch, _p, &pdmac->ddma.channels,
3018                         chan.device_node) {
3019
3020                 /* Remove the channel */
3021                 list_del(&pch->chan.device_node);
3022
3023                 /* Flush the channel */
3024                 pl330_control(&pch->chan, DMA_TERMINATE_ALL, 0);
3025                 pl330_free_chan_resources(&pch->chan);
3026         }
3027
3028         pi = &pdmac->pif;
3029
3030         pl330_del(pi);
3031
3032         irq = adev->irq[0];
3033         free_irq(irq, pi);
3034
3035         iounmap(pi->base);
3036
3037         res = &adev->res;
3038         release_mem_region(res->start, resource_size(res));
3039
3040 #ifndef CONFIG_PM_RUNTIME
3041         clk_disable(pdmac->clk);
3042 #endif
3043
3044         kfree(pdmac);
3045
3046         return 0;
3047 }
3048
3049 static struct amba_id pl330_ids[] = {
3050         {
3051                 .id     = 0x00041330,
3052                 .mask   = 0x000fffff,
3053         },
3054         { 0, 0 },
3055 };
3056
3057 MODULE_DEVICE_TABLE(amba, pl330_ids);
3058
3059 #ifdef CONFIG_PM_RUNTIME
3060 static int pl330_runtime_suspend(struct device *dev)
3061 {
3062         struct dma_pl330_dmac *pdmac = dev_get_drvdata(dev);
3063
3064         if (!pdmac) {
3065                 dev_err(dev, "failed to get dmac\n");
3066                 return -ENODEV;
3067         }
3068
3069         clk_disable(pdmac->clk);
3070
3071         return 0;
3072 }
3073
3074 static int pl330_runtime_resume(struct device *dev)
3075 {
3076         struct dma_pl330_dmac *pdmac = dev_get_drvdata(dev);
3077
3078         if (!pdmac) {
3079                 dev_err(dev, "failed to get dmac\n");
3080                 return -ENODEV;
3081         }
3082
3083         clk_enable(pdmac->clk);
3084
3085         return 0;
3086 }
3087 #else
3088 #define pl330_runtime_suspend   NULL
3089 #define pl330_runtime_resume    NULL
3090 #endif /* CONFIG_PM_RUNTIME */
3091
3092 static const struct dev_pm_ops pl330_pm_ops = {
3093         .runtime_suspend = pl330_runtime_suspend,
3094         .runtime_resume = pl330_runtime_resume,
3095 };
3096
3097 static struct amba_driver pl330_driver = {
3098         .drv = {
3099                 .owner = THIS_MODULE,
3100                 .name = "dma-pl330",
3101                 .pm = &pl330_pm_ops,
3102         },
3103         .id_table = pl330_ids,
3104         .probe = pl330_probe,
3105         .remove = pl330_remove,
3106 };
3107
3108 module_amba_driver(pl330_driver);
3109
3110 MODULE_AUTHOR("Jaswinder Singh <jassi.brar@samsung.com>");
3111 MODULE_DESCRIPTION("API Driver for PL330 DMAC");
3112 MODULE_LICENSE("GPL");