drivers/cpufreq/exynos-cpufreq.c

   1 /*
   2  * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
   3  *              http://www.samsung.com
   4  *
   5  * EXYNOS - CPU frequency scaling support for EXYNOS series
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License version 2 as
   9  * published by the Free Software Foundation.
  10 */
  11
  12 #include <linux/kernel.h>
  13 #include <linux/err.h>
  14 #include <linux/clk.h>
  15 #include <linux/io.h>
  16 #include <linux/slab.h>
  17 #include <linux/regulator/consumer.h>
  18 #include <linux/cpufreq.h>
  19 #include <linux/suspend.h>
  20
  21 #include <mach/cpufreq.h>
  22
  23 #include <plat/cpu.h>
  24
  25 static struct exynos_dvfs_info *exynos_info;
  26
  27 static struct regulator *arm_regulator;
  28 static struct cpufreq_freqs freqs;
  29
  30 static unsigned int locking_frequency;
  31 static bool frequency_locked;
  32 static DEFINE_MUTEX(cpufreq_lock);
  33
  34 int exynos_verify_speed(struct cpufreq_policy *policy)
  35 {
  36         return cpufreq_frequency_table_verify(policy,
  37                                               exynos_info->freq_table);
  38 }
  39
  40 unsigned int exynos_getspeed(unsigned int cpu)
  41 {
  42         return clk_get_rate(exynos_info->cpu_clk) / 1000;
  43 }
  44
  45 static int exynos_target(struct cpufreq_policy *policy,
  46                           unsigned int target_freq,
  47                           unsigned int relation)
  48 {
  49         unsigned int index, old_index;
  50         unsigned int arm_volt, safe_arm_volt = 0;
  51         int ret = 0;
  52         struct cpufreq_frequency_table *freq_table = exynos_info->freq_table;
  53         unsigned int *volt_table = exynos_info->volt_table;
  54         unsigned int mpll_freq_khz = exynos_info->mpll_freq_khz;
  55
  56         mutex_lock(&cpufreq_lock);
  57
  58         freqs.old = policy->cur;
  59
  60         if (frequency_locked && target_freq != locking_frequency) {
  61                 ret = -EAGAIN;
  62                 goto out;
  63         }
  64
  65         /*
  66          * The policy max have been changed so that we cannot get proper
  67          * old_index with cpufreq_frequency_table_target(). Thus, ignore
  68          * policy and get the index from the raw freqeuncy table.
  69          */
  70         for (old_index = 0;
  71                 freq_table[old_index].frequency != CPUFREQ_TABLE_END;
  72                 old_index++)
  73                 if (freq_table[old_index].frequency == freqs.old)
  74                         break;
  75
  76         if (freq_table[old_index].frequency == CPUFREQ_TABLE_END) {
  77                 ret = -EINVAL;
  78                 goto out;
  79         }
  80
  81         if (cpufreq_frequency_table_target(policy, freq_table,
  82                                            target_freq, relation, &index)) {
  83                 ret = -EINVAL;
  84                 goto out;
  85         }
  86
  87         freqs.new = freq_table[index].frequency;
  88         freqs.cpu = policy->cpu;
  89
  90         /*
  91          * ARM clock source will be changed APLL to MPLL temporary
  92          * To support this level, need to control regulator for
  93          * required voltage level
  94          */
  95         if (exynos_info->need_apll_change != NULL) {
  96                 if (exynos_info->need_apll_change(old_index, index) &&
  97                    (freq_table[index].frequency < mpll_freq_khz) &&
  98                    (freq_table[old_index].frequency < mpll_freq_khz))
  99                         safe_arm_volt = volt_table[exynos_info->pll_safe_idx];
 100         }
 101         arm_volt = volt_table[index];
 102
 103         cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 104
 105         /* When the new frequency is higher than current frequency */
 106         if ((freqs.new > freqs.old) && !safe_arm_volt) {
 107                 /* Firstly, voltage up to increase frequency */
 108                 regulator_set_voltage(arm_regulator, arm_volt,
 109                                 arm_volt);
 110         }
 111
 112         if (safe_arm_volt)
 113                 regulator_set_voltage(arm_regulator, safe_arm_volt,
 114                                       safe_arm_volt);
 115         if (freqs.new != freqs.old)
 116                 exynos_info->set_freq(old_index, index);
 117
 118         cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 119
 120         /* When the new frequency is lower than current frequency */
 121         if ((freqs.new < freqs.old) ||
 122            ((freqs.new > freqs.old) && safe_arm_volt)) {
 123                 /* down the voltage after frequency change */
 124                 regulator_set_voltage(arm_regulator, arm_volt,
 125                                 arm_volt);
 126         }
 127
 128 out:
 129         mutex_unlock(&cpufreq_lock);
 130
 131         return ret;
 132 }
 133
 134 #ifdef CONFIG_PM
 135 static int exynos_cpufreq_suspend(struct cpufreq_policy *policy)
 136 {
 137         return 0;
 138 }
 139
 140 static int exynos_cpufreq_resume(struct cpufreq_policy *policy)
 141 {
 142         return 0;
 143 }
 144 #endif
 145
 146 /**
 147  * exynos_cpufreq_pm_notifier - block CPUFREQ's activities in suspend-resume
 148  *                      context
 149  * @notifier
 150  * @pm_event
 151  * @v
 152  *
 153  * While frequency_locked == true, target() ignores every frequency but
 154  * locking_frequency. The locking_frequency value is the initial frequency,
 155  * which is set by the bootloader. In order to eliminate possible
 156  * inconsistency in clock values, we save and restore frequencies during
 157  * suspend and resume and block CPUFREQ activities. Note that the standard
 158  * suspend/resume cannot be used as they are too deep (syscore_ops) for
 159  * regulator actions.
 160  */
 161 static int exynos_cpufreq_pm_notifier(struct notifier_block *notifier,
 162                                        unsigned long pm_event, void *v)
 163 {
 164         struct cpufreq_policy *policy = cpufreq_cpu_get(0); /* boot CPU */
 165         static unsigned int saved_frequency;
 166         unsigned int temp;
 167
 168         mutex_lock(&cpufreq_lock);
 169         switch (pm_event) {
 170         case PM_SUSPEND_PREPARE:
 171                 if (frequency_locked)
 172                         goto out;
 173
 174                 frequency_locked = true;
 175
 176                 if (locking_frequency) {
 177                         saved_frequency = exynos_getspeed(0);
 178
 179                         mutex_unlock(&cpufreq_lock);
 180                         exynos_target(policy, locking_frequency,
 181                                       CPUFREQ_RELATION_H);
 182                         mutex_lock(&cpufreq_lock);
 183                 }
 184                 break;
 185
 186         case PM_POST_SUSPEND:
 187                 if (saved_frequency) {
 188                         /*
 189                          * While frequency_locked, only locking_frequency
 190                          * is valid for target(). In order to use
 191                          * saved_frequency while keeping frequency_locked,
 192                          * we temporarly overwrite locking_frequency.
 193                          */
 194                         temp = locking_frequency;
 195                         locking_frequency = saved_frequency;
 196
 197                         mutex_unlock(&cpufreq_lock);
 198                         exynos_target(policy, locking_frequency,
 199                                       CPUFREQ_RELATION_H);
 200                         mutex_lock(&cpufreq_lock);
 201
 202                         locking_frequency = temp;
 203                 }
 204                 frequency_locked = false;
 205                 break;
 206         }
 207 out:
 208         mutex_unlock(&cpufreq_lock);
 209
 210         return NOTIFY_OK;
 211 }
 212
 213 static struct notifier_block exynos_cpufreq_nb = {
 214         .notifier_call = exynos_cpufreq_pm_notifier,
 215 };
 216
 217 static int exynos_cpufreq_cpu_init(struct cpufreq_policy *policy)
 218 {
 219         policy->cur = policy->min = policy->max = exynos_getspeed(policy->cpu);
 220
 221         cpufreq_frequency_table_get_attr(exynos_info->freq_table, policy->cpu);
 222
 223         locking_frequency = exynos_getspeed(0);
 224
 225         /* set the transition latency value */
 226         policy->cpuinfo.transition_latency = 100000;
 227
 228         /*
 229          * EXYNOS4 multi-core processors has 2 cores
 230          * that the frequency cannot be set independently.
 231          * Each cpu is bound to the same speed.
 232          * So the affected cpu is all of the cpus.
 233          */
 234         if (num_online_cpus() == 1) {
 235                 cpumask_copy(policy->related_cpus, cpu_possible_mask);
 236                 cpumask_copy(policy->cpus, cpu_online_mask);
 237         } else {
 238                 cpumask_setall(policy->cpus);
 239         }
 240
 241         return cpufreq_frequency_table_cpuinfo(policy, exynos_info->freq_table);
 242 }
 243
 244 static struct cpufreq_driver exynos_driver = {
 245         .flags          = CPUFREQ_STICKY,
 246         .verify         = exynos_verify_speed,
 247         .target         = exynos_target,
 248         .get            = exynos_getspeed,
 249         .init           = exynos_cpufreq_cpu_init,
 250         .name           = "exynos_cpufreq",
 251 #ifdef CONFIG_PM
 252         .suspend        = exynos_cpufreq_suspend,
 253         .resume         = exynos_cpufreq_resume,
 254 #endif
 255 };
 256
 257 static int __init exynos_cpufreq_init(void)
 258 {
 259         int ret = -EINVAL;
 260
 261         exynos_info = kzalloc(sizeof(struct exynos_dvfs_info), GFP_KERNEL);
 262         if (!exynos_info)
 263                 return -ENOMEM;
 264
 265         if (soc_is_exynos4210())
 266                 ret = exynos4210_cpufreq_init(exynos_info);
 267         else if (soc_is_exynos4212() || soc_is_exynos4412())
 268                 ret = exynos4x12_cpufreq_init(exynos_info);
 269         else if (soc_is_exynos5250())
 270                 ret = exynos5250_cpufreq_init(exynos_info);
 271         else
 272                 pr_err("%s: CPU type not found\n", __func__);
 273
 274         if (ret)
 275                 goto err_vdd_arm;
 276
 277         if (exynos_info->set_freq == NULL) {
 278                 pr_err("%s: No set_freq function (ERR)\n", __func__);
 279                 goto err_vdd_arm;
 280         }
 281
 282         arm_regulator = regulator_get(NULL, "vdd_arm");
 283         if (IS_ERR(arm_regulator)) {
 284                 pr_err("%s: failed to get resource vdd_arm\n", __func__);
 285                 goto err_vdd_arm;
 286         }
 287
 288         register_pm_notifier(&exynos_cpufreq_nb);
 289
 290         if (cpufreq_register_driver(&exynos_driver)) {
 291                 pr_err("%s: failed to register cpufreq driver\n", __func__);
 292                 goto err_cpufreq;
 293         }
 294
 295         return 0;
 296 err_cpufreq:
 297         unregister_pm_notifier(&exynos_cpufreq_nb);
 298
 299         if (!IS_ERR(arm_regulator))
 300                 regulator_put(arm_regulator);
 301 err_vdd_arm:
 302         kfree(exynos_info);
 303         pr_debug("%s: failed initialization\n", __func__);
 304         return -EINVAL;
 305 }
 306 late_initcall(exynos_cpufreq_init);