drm: drivers/char/drm/: make some functions static
[pandora-kernel.git] / drivers / char / drm / via_dmablit.c
1 /* via_dmablit.c -- PCI DMA BitBlt support for the VIA Unichrome/Pro
2  * 
3  * Copyright (C) 2005 Thomas Hellstrom, All Rights Reserved.
4  *
5  * Permission is hereby granted, free of charge, to any person obtaining a
6  * copy of this software and associated documentation files (the "Software"),
7  * to deal in the Software without restriction, including without limitation
8  * the rights to use, copy, modify, merge, publish, distribute, sub license,
9  * and/or sell copies of the Software, and to permit persons to whom the
10  * Software is furnished to do so, subject to the following conditions:
11  *
12  * The above copyright notice and this permission notice (including the
13  * next paragraph) shall be included in all copies or substantial portions
14  * of the Software.
15  *
16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18  * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
19  * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, 
20  * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR 
21  * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE 
22  * USE OR OTHER DEALINGS IN THE SOFTWARE.
23  *
24  * Authors: 
25  *    Thomas Hellstrom.
26  *    Partially based on code obtained from Digeo Inc.
27  */
28
29
30 /*
31  * Unmaps the DMA mappings. 
32  * FIXME: Is this a NoOp on x86? Also 
33  * FIXME: What happens if this one is called and a pending blit has previously done 
34  * the same DMA mappings? 
35  */
36
37 #include "drmP.h"
38 #include "via_drm.h"
39 #include "via_drv.h"
40 #include "via_dmablit.h"
41
42 #include <linux/pagemap.h>
43
44 #define VIA_PGDN(x)             (((unsigned long)(x)) & PAGE_MASK)
45 #define VIA_PGOFF(x)            (((unsigned long)(x)) & ~PAGE_MASK)
46 #define VIA_PFN(x)              ((unsigned long)(x) >> PAGE_SHIFT)
47
48 typedef struct _drm_via_descriptor {
49         uint32_t mem_addr;
50         uint32_t dev_addr;
51         uint32_t size;
52         uint32_t next;
53 } drm_via_descriptor_t;
54
55
56 /*
57  * Unmap a DMA mapping.
58  */
59
60
61
62 static void
63 via_unmap_blit_from_device(struct pci_dev *pdev, drm_via_sg_info_t *vsg)
64 {
65         int num_desc = vsg->num_desc;
66         unsigned cur_descriptor_page = num_desc / vsg->descriptors_per_page;
67         unsigned descriptor_this_page = num_desc % vsg->descriptors_per_page;
68         drm_via_descriptor_t *desc_ptr = vsg->desc_pages[cur_descriptor_page] + 
69                 descriptor_this_page;
70         dma_addr_t next = vsg->chain_start;
71
72         while(num_desc--) {
73                 if (descriptor_this_page-- == 0) {
74                         cur_descriptor_page--;
75                         descriptor_this_page = vsg->descriptors_per_page - 1;
76                         desc_ptr = vsg->desc_pages[cur_descriptor_page] + 
77                                 descriptor_this_page;
78                 }
79                 dma_unmap_single(&pdev->dev, next, sizeof(*desc_ptr), DMA_TO_DEVICE);
80                 dma_unmap_page(&pdev->dev, desc_ptr->mem_addr, desc_ptr->size, vsg->direction);
81                 next = (dma_addr_t) desc_ptr->next;
82                 desc_ptr--;
83         }
84 }
85
86 /*
87  * If mode = 0, count how many descriptors are needed.
88  * If mode = 1, Map the DMA pages for the device, put together and map also the descriptors.
89  * Descriptors are run in reverse order by the hardware because we are not allowed to update the
90  * 'next' field without syncing calls when the descriptor is already mapped.
91  */
92
93 static void
94 via_map_blit_for_device(struct pci_dev *pdev,
95                    const drm_via_dmablit_t *xfer,
96                    drm_via_sg_info_t *vsg, 
97                    int mode)
98 {
99         unsigned cur_descriptor_page = 0;
100         unsigned num_descriptors_this_page = 0;
101         unsigned char *mem_addr = xfer->mem_addr;
102         unsigned char *cur_mem;
103         unsigned char *first_addr = (unsigned char *)VIA_PGDN(mem_addr);
104         uint32_t fb_addr = xfer->fb_addr;
105         uint32_t cur_fb;
106         unsigned long line_len;
107         unsigned remaining_len;
108         int num_desc = 0;
109         int cur_line;
110         dma_addr_t next = 0 | VIA_DMA_DPR_EC;
111         drm_via_descriptor_t *desc_ptr = NULL;
112
113         if (mode == 1) 
114                 desc_ptr = vsg->desc_pages[cur_descriptor_page];
115
116         for (cur_line = 0; cur_line < xfer->num_lines; ++cur_line) {
117
118                 line_len = xfer->line_length;
119                 cur_fb = fb_addr;
120                 cur_mem = mem_addr;
121                 
122                 while (line_len > 0) {
123
124                         remaining_len = min(PAGE_SIZE-VIA_PGOFF(cur_mem), line_len);
125                         line_len -= remaining_len;
126
127                         if (mode == 1) {
128                                 desc_ptr->mem_addr = 
129                                         dma_map_page(&pdev->dev, 
130                                                      vsg->pages[VIA_PFN(cur_mem) - 
131                                                                 VIA_PFN(first_addr)],
132                                                      VIA_PGOFF(cur_mem), remaining_len, 
133                                                      vsg->direction);
134                                 desc_ptr->dev_addr = cur_fb;
135                                 
136                                 desc_ptr->size = remaining_len;
137                                 desc_ptr->next = (uint32_t) next;
138                                 next = dma_map_single(&pdev->dev, desc_ptr, sizeof(*desc_ptr), 
139                                                       DMA_TO_DEVICE);
140                                 desc_ptr++;
141                                 if (++num_descriptors_this_page >= vsg->descriptors_per_page) {
142                                         num_descriptors_this_page = 0;
143                                         desc_ptr = vsg->desc_pages[++cur_descriptor_page];
144                                 }
145                         }
146                         
147                         num_desc++;
148                         cur_mem += remaining_len;
149                         cur_fb += remaining_len;
150                 }
151                 
152                 mem_addr += xfer->mem_stride;
153                 fb_addr += xfer->fb_stride;
154         }
155
156         if (mode == 1) {
157                 vsg->chain_start = next;
158                 vsg->state = dr_via_device_mapped;
159         }
160         vsg->num_desc = num_desc;
161 }
162
163 /*
164  * Function that frees up all resources for a blit. It is usable even if the 
165  * blit info has only be partially built as long as the status enum is consistent
166  * with the actual status of the used resources.
167  */
168
169
170 static void
171 via_free_sg_info(struct pci_dev *pdev, drm_via_sg_info_t *vsg) 
172 {
173         struct page *page;
174         int i;
175
176         switch(vsg->state) {
177         case dr_via_device_mapped:
178                 via_unmap_blit_from_device(pdev, vsg);
179         case dr_via_desc_pages_alloc:
180                 for (i=0; i<vsg->num_desc_pages; ++i) {
181                         if (vsg->desc_pages[i] != NULL)
182                           free_page((unsigned long)vsg->desc_pages[i]);
183                 }
184                 kfree(vsg->desc_pages);
185         case dr_via_pages_locked:
186                 for (i=0; i<vsg->num_pages; ++i) {
187                         if ( NULL != (page = vsg->pages[i])) {
188                                 if (! PageReserved(page) && (DMA_FROM_DEVICE == vsg->direction)) 
189                                         SetPageDirty(page);
190                                 page_cache_release(page);
191                         }
192                 }
193         case dr_via_pages_alloc:
194                 vfree(vsg->pages);
195         default:
196                 vsg->state = dr_via_sg_init;
197         }
198         if (vsg->bounce_buffer) {
199                 vfree(vsg->bounce_buffer);
200                 vsg->bounce_buffer = NULL;
201         }
202         vsg->free_on_sequence = 0;
203 }               
204
205 /*
206  * Fire a blit engine.
207  */
208
209 static void
210 via_fire_dmablit(drm_device_t *dev, drm_via_sg_info_t *vsg, int engine)
211 {
212         drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
213
214         VIA_WRITE(VIA_PCI_DMA_MAR0 + engine*0x10, 0);
215         VIA_WRITE(VIA_PCI_DMA_DAR0 + engine*0x10, 0);
216         VIA_WRITE(VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_DD | VIA_DMA_CSR_TD | 
217                   VIA_DMA_CSR_DE);
218         VIA_WRITE(VIA_PCI_DMA_MR0  + engine*0x04, VIA_DMA_MR_CM | VIA_DMA_MR_TDIE);
219         VIA_WRITE(VIA_PCI_DMA_BCR0 + engine*0x10, 0);
220         VIA_WRITE(VIA_PCI_DMA_DPR0 + engine*0x10, vsg->chain_start);
221         VIA_WRITE(VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_DE | VIA_DMA_CSR_TS);
222 }
223
224 /*
225  * Obtain a page pointer array and lock all pages into system memory. A segmentation violation will
226  * occur here if the calling user does not have access to the submitted address.
227  */
228
229 static int
230 via_lock_all_dma_pages(drm_via_sg_info_t *vsg,  drm_via_dmablit_t *xfer)
231 {
232         int ret;
233         unsigned long first_pfn = VIA_PFN(xfer->mem_addr);
234         vsg->num_pages = VIA_PFN(xfer->mem_addr + (xfer->num_lines * xfer->mem_stride -1)) - 
235                 first_pfn + 1;
236         
237         if (NULL == (vsg->pages = vmalloc(sizeof(struct page *) * vsg->num_pages)))
238                 return DRM_ERR(ENOMEM);
239         memset(vsg->pages, 0, sizeof(struct page *) * vsg->num_pages);
240         down_read(&current->mm->mmap_sem);
241         ret = get_user_pages(current, current->mm, (unsigned long) xfer->mem_addr,
242                              vsg->num_pages, vsg->direction, 0, vsg->pages, NULL);
243
244         up_read(&current->mm->mmap_sem);
245         if (ret != vsg->num_pages) {
246                 if (ret < 0) 
247                         return ret;
248                 vsg->state = dr_via_pages_locked;
249                 return DRM_ERR(EINVAL);
250         }
251         vsg->state = dr_via_pages_locked;
252         DRM_DEBUG("DMA pages locked\n");
253         return 0;
254 }
255
256 /*
257  * Allocate DMA capable memory for the blit descriptor chain, and an array that keeps track of the
258  * pages we allocate. We don't want to use kmalloc for the descriptor chain because it may be
259  * quite large for some blits, and pages don't need to be contingous.
260  */
261
262 static int 
263 via_alloc_desc_pages(drm_via_sg_info_t *vsg)
264 {
265         int i;
266         
267         vsg->descriptors_per_page = PAGE_SIZE / sizeof( drm_via_descriptor_t);
268         vsg->num_desc_pages = (vsg->num_desc + vsg->descriptors_per_page - 1) / 
269                 vsg->descriptors_per_page;
270
271         if (NULL ==  (vsg->desc_pages = kmalloc(sizeof(void *) * vsg->num_desc_pages, GFP_KERNEL))) 
272                 return DRM_ERR(ENOMEM);
273         
274         memset(vsg->desc_pages, 0, sizeof(void *) * vsg->num_desc_pages);
275         vsg->state = dr_via_desc_pages_alloc;
276         for (i=0; i<vsg->num_desc_pages; ++i) {
277                 if (NULL == (vsg->desc_pages[i] = 
278                              (drm_via_descriptor_t *) __get_free_page(GFP_KERNEL)))
279                         return DRM_ERR(ENOMEM);
280         }
281         DRM_DEBUG("Allocated %d pages for %d descriptors.\n", vsg->num_desc_pages,
282                   vsg->num_desc);
283         return 0;
284 }
285                         
286 static void
287 via_abort_dmablit(drm_device_t *dev, int engine)
288 {
289         drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
290
291         VIA_WRITE(VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_TA);
292 }
293
294 static void
295 via_dmablit_engine_off(drm_device_t *dev, int engine)
296 {
297         drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
298
299         VIA_WRITE(VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_TD | VIA_DMA_CSR_DD); 
300 }
301
302
303
304 /*
305  * The dmablit part of the IRQ handler. Trying to do only reasonably fast things here.
306  * The rest, like unmapping and freeing memory for done blits is done in a separate workqueue
307  * task. Basically the task of the interrupt handler is to submit a new blit to the engine, while
308  * the workqueue task takes care of processing associated with the old blit.
309  */
310                 
311 void
312 via_dmablit_handler(drm_device_t *dev, int engine, int from_irq)
313 {
314         drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
315         drm_via_blitq_t *blitq = dev_priv->blit_queues + engine;
316         int cur;
317         int done_transfer;
318         unsigned long irqsave=0;
319         uint32_t status = 0;
320
321         DRM_DEBUG("DMA blit handler called. engine = %d, from_irq = %d, blitq = 0x%lx\n",
322                   engine, from_irq, (unsigned long) blitq);
323
324         if (from_irq) {
325                 spin_lock(&blitq->blit_lock);
326         } else {
327                 spin_lock_irqsave(&blitq->blit_lock, irqsave);
328         }
329
330         done_transfer = blitq->is_active && 
331           (( status = VIA_READ(VIA_PCI_DMA_CSR0 + engine*0x04)) & VIA_DMA_CSR_TD);
332         done_transfer = done_transfer || ( blitq->aborting && !(status & VIA_DMA_CSR_DE)); 
333
334         cur = blitq->cur;
335         if (done_transfer) {
336
337                 blitq->blits[cur]->aborted = blitq->aborting;
338                 blitq->done_blit_handle++;
339                 DRM_WAKEUP(blitq->blit_queue + cur);            
340
341                 cur++;
342                 if (cur >= VIA_NUM_BLIT_SLOTS) 
343                         cur = 0;
344                 blitq->cur = cur;
345
346                 /*
347                  * Clear transfer done flag.
348                  */
349
350                 VIA_WRITE(VIA_PCI_DMA_CSR0 + engine*0x04,  VIA_DMA_CSR_TD);
351
352                 blitq->is_active = 0;
353                 blitq->aborting = 0;
354                 schedule_work(&blitq->wq);      
355
356         } else if (blitq->is_active && time_after_eq(jiffies, blitq->end)) {
357
358                 /*
359                  * Abort transfer after one second.
360                  */
361
362                 via_abort_dmablit(dev, engine);
363                 blitq->aborting = 1;
364                 blitq->end = jiffies + DRM_HZ;
365         }
366                         
367         if (!blitq->is_active) {
368                 if (blitq->num_outstanding) {
369                         via_fire_dmablit(dev, blitq->blits[cur], engine);
370                         blitq->is_active = 1;
371                         blitq->cur = cur;
372                         blitq->num_outstanding--;
373                         blitq->end = jiffies + DRM_HZ;
374                         if (!timer_pending(&blitq->poll_timer)) {
375                                 blitq->poll_timer.expires = jiffies+1;
376                                 add_timer(&blitq->poll_timer);
377                         }
378                 } else {
379                         if (timer_pending(&blitq->poll_timer)) {
380                                 del_timer(&blitq->poll_timer);
381                         }
382                         via_dmablit_engine_off(dev, engine);
383                 }
384         }               
385
386         if (from_irq) {
387                 spin_unlock(&blitq->blit_lock);
388         } else {
389                 spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
390         }
391
392
393
394
395 /*
396  * Check whether this blit is still active, performing necessary locking.
397  */
398
399 static int
400 via_dmablit_active(drm_via_blitq_t *blitq, int engine, uint32_t handle, wait_queue_head_t **queue)
401 {
402         unsigned long irqsave;
403         uint32_t slot;
404         int active;
405
406         spin_lock_irqsave(&blitq->blit_lock, irqsave);
407
408         /*
409          * Allow for handle wraparounds.
410          */
411
412         active = ((blitq->done_blit_handle - handle) > (1 << 23)) &&
413                 ((blitq->cur_blit_handle - handle) <= (1 << 23));
414
415         if (queue && active) {
416                 slot = handle - blitq->done_blit_handle + blitq->cur -1;
417                 if (slot >= VIA_NUM_BLIT_SLOTS) {
418                         slot -= VIA_NUM_BLIT_SLOTS;
419                 }
420                 *queue = blitq->blit_queue + slot;
421         }
422
423         spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
424
425         return active;
426 }
427         
428 /*
429  * Sync. Wait for at least three seconds for the blit to be performed.
430  */
431
432 static int
433 via_dmablit_sync(drm_device_t *dev, uint32_t handle, int engine) 
434 {
435
436         drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
437         drm_via_blitq_t *blitq = dev_priv->blit_queues + engine;
438         wait_queue_head_t *queue;
439         int ret = 0;
440
441         if (via_dmablit_active(blitq, engine, handle, &queue)) {
442                 DRM_WAIT_ON(ret, *queue, 3 * DRM_HZ, 
443                             !via_dmablit_active(blitq, engine, handle, NULL));
444         }
445         DRM_DEBUG("DMA blit sync handle 0x%x engine %d returned %d\n",
446                   handle, engine, ret);
447         
448         return ret;
449 }
450
451
452 /*
453  * A timer that regularly polls the blit engine in cases where we don't have interrupts:
454  * a) Broken hardware (typically those that don't have any video capture facility).
455  * b) Blit abort. The hardware doesn't send an interrupt when a blit is aborted.
456  * The timer and hardware IRQ's can and do work in parallel. If the hardware has
457  * irqs, it will shorten the latency somewhat.
458  */
459
460
461
462 static void
463 via_dmablit_timer(unsigned long data)
464 {
465         drm_via_blitq_t *blitq = (drm_via_blitq_t *) data;
466         drm_device_t *dev = blitq->dev;
467         int engine = (int)
468                 (blitq - ((drm_via_private_t *)dev->dev_private)->blit_queues);
469                 
470         DRM_DEBUG("Polling timer called for engine %d, jiffies %lu\n", engine, 
471                   (unsigned long) jiffies);
472
473         via_dmablit_handler(dev, engine, 0);
474         
475         if (!timer_pending(&blitq->poll_timer)) {
476                 blitq->poll_timer.expires = jiffies+1;
477                 add_timer(&blitq->poll_timer);
478         }
479         via_dmablit_handler(dev, engine, 0);
480
481 }
482
483
484
485
486 /*
487  * Workqueue task that frees data and mappings associated with a blit.
488  * Also wakes up waiting processes. Each of these tasks handles one
489  * blit engine only and may not be called on each interrupt.
490  */
491
492
493 static void 
494 via_dmablit_workqueue(void *data)
495 {
496         drm_via_blitq_t *blitq = (drm_via_blitq_t *) data;
497         drm_device_t *dev = blitq->dev;
498         unsigned long irqsave;
499         drm_via_sg_info_t *cur_sg;
500         int cur_released;
501         
502         
503         DRM_DEBUG("Workqueue task called for blit engine %ld\n",(unsigned long) 
504                   (blitq - ((drm_via_private_t *)dev->dev_private)->blit_queues));
505
506         spin_lock_irqsave(&blitq->blit_lock, irqsave);
507         
508         while(blitq->serviced != blitq->cur) {
509
510                 cur_released = blitq->serviced++;
511
512                 DRM_DEBUG("Releasing blit slot %d\n", cur_released);
513
514                 if (blitq->serviced >= VIA_NUM_BLIT_SLOTS) 
515                         blitq->serviced = 0;
516                 
517                 cur_sg = blitq->blits[cur_released];
518                 blitq->num_free++;
519                                 
520                 spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
521                 
522                 DRM_WAKEUP(&blitq->busy_queue);
523                 
524                 via_free_sg_info(dev->pdev, cur_sg);
525                 kfree(cur_sg);
526                 
527                 spin_lock_irqsave(&blitq->blit_lock, irqsave);
528         }
529
530         spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
531 }
532         
533
534 /*
535  * Init all blit engines. Currently we use two, but some hardware have 4.
536  */
537
538
539 void
540 via_init_dmablit(drm_device_t *dev)
541 {
542         int i,j;
543         drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
544         drm_via_blitq_t *blitq;
545
546         pci_set_master(dev->pdev);      
547         
548         for (i=0; i< VIA_NUM_BLIT_ENGINES; ++i) {
549                 blitq = dev_priv->blit_queues + i;
550                 blitq->dev = dev;
551                 blitq->cur_blit_handle = 0;
552                 blitq->done_blit_handle = 0;
553                 blitq->head = 0;
554                 blitq->cur = 0;
555                 blitq->serviced = 0;
556                 blitq->num_free = VIA_NUM_BLIT_SLOTS;
557                 blitq->num_outstanding = 0;
558                 blitq->is_active = 0;
559                 blitq->aborting = 0;
560                 blitq->blit_lock = SPIN_LOCK_UNLOCKED;
561                 for (j=0; j<VIA_NUM_BLIT_SLOTS; ++j) {
562                         DRM_INIT_WAITQUEUE(blitq->blit_queue + j);
563                 }
564                 DRM_INIT_WAITQUEUE(&blitq->busy_queue);
565                 INIT_WORK(&blitq->wq, via_dmablit_workqueue, blitq);
566                 init_timer(&blitq->poll_timer);
567                 blitq->poll_timer.function = &via_dmablit_timer;
568                 blitq->poll_timer.data = (unsigned long) blitq;
569         }       
570 }
571
572 /*
573  * Build all info and do all mappings required for a blit.
574  */
575                 
576
577 static int
578 via_build_sg_info(drm_device_t *dev, drm_via_sg_info_t *vsg, drm_via_dmablit_t *xfer)
579 {
580         int draw = xfer->to_fb;
581         int ret = 0;
582         
583         vsg->direction = (draw) ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
584         vsg->bounce_buffer = NULL;
585
586         vsg->state = dr_via_sg_init;
587
588         if (xfer->num_lines <= 0 || xfer->line_length <= 0) {
589                 DRM_ERROR("Zero size bitblt.\n");
590                 return DRM_ERR(EINVAL);
591         }
592
593         /*
594          * Below check is a driver limitation, not a hardware one. We
595          * don't want to lock unused pages, and don't want to incoporate the
596          * extra logic of avoiding them. Make sure there are no. 
597          * (Not a big limitation anyway.)
598          */
599
600         if (((xfer->mem_stride - xfer->line_length) >= PAGE_SIZE) ||
601             (xfer->mem_stride > 2048*4)) {
602                 DRM_ERROR("Too large system memory stride. Stride: %d, "
603                           "Length: %d\n", xfer->mem_stride, xfer->line_length);
604                 return DRM_ERR(EINVAL);
605         }
606
607         if (xfer->num_lines > 2048) {
608                 DRM_ERROR("Too many PCI DMA bitblt lines.\n");
609                 return DRM_ERR(EINVAL);
610         }               
611
612         /* 
613          * we allow a negative fb stride to allow flipping of images in
614          * transfer. 
615          */
616
617         if (xfer->mem_stride < xfer->line_length ||
618                 abs(xfer->fb_stride) < xfer->line_length) {
619                 DRM_ERROR("Invalid frame-buffer / memory stride.\n");
620                 return DRM_ERR(EINVAL);
621         }
622
623         /*
624          * A hardware bug seems to be worked around if system memory addresses start on
625          * 16 byte boundaries. This seems a bit restrictive however. VIA is contacted
626          * about this. Meanwhile, impose the following restrictions:
627          */
628
629 #ifdef VIA_BUGFREE
630         if ((((unsigned long)xfer->mem_addr & 3) != ((unsigned long)xfer->fb_addr & 3)) ||
631             ((xfer->mem_stride & 3) != (xfer->fb_stride & 3))) {
632                 DRM_ERROR("Invalid DRM bitblt alignment.\n");
633                 return DRM_ERR(EINVAL);
634         }
635 #else
636         if ((((unsigned long)xfer->mem_addr & 15) ||
637             ((unsigned long)xfer->fb_addr & 3)) || (xfer->mem_stride & 15) ||
638             (xfer->fb_stride & 3)) {
639                 DRM_ERROR("Invalid DRM bitblt alignment.\n");
640                 return DRM_ERR(EINVAL);
641         }       
642 #endif
643
644         if (0 != (ret = via_lock_all_dma_pages(vsg, xfer))) {
645                 DRM_ERROR("Could not lock DMA pages.\n");
646                 via_free_sg_info(dev->pdev, vsg);
647                 return ret;
648         }
649
650         via_map_blit_for_device(dev->pdev, xfer, vsg, 0);
651         if (0 != (ret = via_alloc_desc_pages(vsg))) {
652                 DRM_ERROR("Could not allocate DMA descriptor pages.\n");
653                 via_free_sg_info(dev->pdev, vsg);
654                 return ret;
655         }
656         via_map_blit_for_device(dev->pdev, xfer, vsg, 1);
657         
658         return 0;
659 }
660         
661
662 /*
663  * Reserve one free slot in the blit queue. Will wait for one second for one
664  * to become available. Otherwise -EBUSY is returned.
665  */
666
667 static int 
668 via_dmablit_grab_slot(drm_via_blitq_t *blitq, int engine)
669 {
670         int ret=0;
671         unsigned long irqsave;
672
673         DRM_DEBUG("Num free is %d\n", blitq->num_free);
674         spin_lock_irqsave(&blitq->blit_lock, irqsave);
675         while(blitq->num_free == 0) {
676                 spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
677
678                 DRM_WAIT_ON(ret, blitq->busy_queue, DRM_HZ, blitq->num_free > 0);
679                 if (ret) {
680                         return (DRM_ERR(EINTR) == ret) ? DRM_ERR(EAGAIN) : ret;
681                 }
682                 
683                 spin_lock_irqsave(&blitq->blit_lock, irqsave);
684         }
685         
686         blitq->num_free--;
687         spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
688
689         return 0;
690 }
691
692 /*
693  * Hand back a free slot if we changed our mind.
694  */
695
696 static void 
697 via_dmablit_release_slot(drm_via_blitq_t *blitq)
698 {
699         unsigned long irqsave;
700
701         spin_lock_irqsave(&blitq->blit_lock, irqsave);
702         blitq->num_free++;
703         spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
704         DRM_WAKEUP( &blitq->busy_queue );
705 }
706
707 /*
708  * Grab a free slot. Build blit info and queue a blit.
709  */
710
711
712 static int 
713 via_dmablit(drm_device_t *dev, drm_via_dmablit_t *xfer)  
714 {
715         drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
716         drm_via_sg_info_t *vsg;
717         drm_via_blitq_t *blitq;
718         int ret;
719         int engine;
720         unsigned long irqsave;
721
722         if (dev_priv == NULL) {
723                 DRM_ERROR("Called without initialization.\n");
724                 return DRM_ERR(EINVAL);
725         }
726
727         engine = (xfer->to_fb) ? 0 : 1;
728         blitq = dev_priv->blit_queues + engine;
729         if (0 != (ret = via_dmablit_grab_slot(blitq, engine))) {
730                 return ret;
731         }
732         if (NULL == (vsg = kmalloc(sizeof(*vsg), GFP_KERNEL))) {
733                 via_dmablit_release_slot(blitq);
734                 return DRM_ERR(ENOMEM);
735         }
736         if (0 != (ret = via_build_sg_info(dev, vsg, xfer))) {
737                 via_dmablit_release_slot(blitq);
738                 kfree(vsg);
739                 return ret;
740         }
741         spin_lock_irqsave(&blitq->blit_lock, irqsave);
742
743         blitq->blits[blitq->head++] = vsg;
744         if (blitq->head >= VIA_NUM_BLIT_SLOTS) 
745                 blitq->head = 0;
746         blitq->num_outstanding++;
747         xfer->sync.sync_handle = ++blitq->cur_blit_handle; 
748
749         spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
750         xfer->sync.engine = engine;
751
752         via_dmablit_handler(dev, engine, 0);
753
754         return 0;
755 }
756
757 /*
758  * Sync on a previously submitted blit. Note that the X server use signals extensively, and
759  * that there is a very big proability that this IOCTL will be interrupted by a signal. In that
760  * case it returns with -EAGAIN for the signal to be delivered. 
761  * The caller should then reissue the IOCTL. This is similar to what is being done for drmGetLock().
762  */
763
764 int
765 via_dma_blit_sync( DRM_IOCTL_ARGS )
766 {
767         drm_via_blitsync_t sync;
768         int err;
769         DRM_DEVICE;
770
771         DRM_COPY_FROM_USER_IOCTL(sync, (drm_via_blitsync_t *)data, sizeof(sync));
772         
773         if (sync.engine >= VIA_NUM_BLIT_ENGINES) 
774                 return DRM_ERR(EINVAL);
775
776         err = via_dmablit_sync(dev, sync.sync_handle, sync.engine);
777
778         if (DRM_ERR(EINTR) == err)
779                 err = DRM_ERR(EAGAIN);
780
781         return err;
782 }
783         
784
785 /*
786  * Queue a blit and hand back a handle to be used for sync. This IOCTL may be interrupted by a signal
787  * while waiting for a free slot in the blit queue. In that case it returns with -EAGAIN and should 
788  * be reissued. See the above IOCTL code.
789  */
790
791 int 
792 via_dma_blit( DRM_IOCTL_ARGS )
793 {
794         drm_via_dmablit_t xfer;
795         int err;
796         DRM_DEVICE;
797
798         DRM_COPY_FROM_USER_IOCTL(xfer, (drm_via_dmablit_t __user *)data, sizeof(xfer));
799
800         err = via_dmablit(dev, &xfer);
801
802         DRM_COPY_TO_USER_IOCTL((void __user *)data, xfer, sizeof(xfer));
803
804         return err;
805 }