drivers/bluetooth/btuart_cs.c

   1 /*
   2  *
   3  *  Driver for Bluetooth PCMCIA cards with HCI UART interface
   4  *
   5  *  Copyright (C) 2001-2002  Marcel Holtmann <marcel@holtmann.org>
   6  *
   7  *
   8  *  This program is free software; you can redistribute it and/or modify
   9  *  it under the terms of the GNU General Public License version 2 as
  10  *  published by the Free Software Foundation;
  11  *
  12  *  Software distributed under the License is distributed on an "AS
  13  *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
  14  *  implied. See the License for the specific language governing
  15  *  rights and limitations under the License.
  16  *
  17  *  The initial developer of the original code is David A. Hinds
  18  *  <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
  19  *  are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
  20  *
  21  */
  22
  23 #include <linux/module.h>
  24
  25 #include <linux/kernel.h>
  26 #include <linux/init.h>
  27 #include <linux/slab.h>
  28 #include <linux/types.h>
  29 #include <linux/delay.h>
  30 #include <linux/errno.h>
  31 #include <linux/ptrace.h>
  32 #include <linux/ioport.h>
  33 #include <linux/spinlock.h>
  34 #include <linux/moduleparam.h>
  35
  36 #include <linux/skbuff.h>
  37 #include <linux/string.h>
  38 #include <linux/serial.h>
  39 #include <linux/serial_reg.h>
  40 #include <linux/bitops.h>
  41 #include <asm/system.h>
  42 #include <asm/io.h>
  43
  44 #include <pcmcia/cs.h>
  45 #include <pcmcia/cistpl.h>
  46 #include <pcmcia/ciscode.h>
  47 #include <pcmcia/ds.h>
  48 #include <pcmcia/cisreg.h>
  49
  50 #include <net/bluetooth/bluetooth.h>
  51 #include <net/bluetooth/hci_core.h>
  52
  53
  54
  55 /* ======================== Module parameters ======================== */
  56
  57
  58 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
  59 MODULE_DESCRIPTION("Bluetooth driver for Bluetooth PCMCIA cards with HCI UART interface");
  60 MODULE_LICENSE("GPL");
  61
  62
  63
  64 /* ======================== Local structures ======================== */
  65
  66
  67 typedef struct btuart_info_t {
  68         struct pcmcia_device *p_dev;
  69
  70         struct hci_dev *hdev;
  71
  72         spinlock_t lock;        /* For serializing operations */
  73
  74         struct sk_buff_head txq;
  75         unsigned long tx_state;
  76
  77         unsigned long rx_state;
  78         unsigned long rx_count;
  79         struct sk_buff *rx_skb;
  80 } btuart_info_t;
  81
  82
  83 static int btuart_config(struct pcmcia_device *link);
  84 static void btuart_release(struct pcmcia_device *link);
  85
  86 static void btuart_detach(struct pcmcia_device *p_dev);
  87
  88
  89 /* Maximum baud rate */
  90 #define SPEED_MAX  115200
  91
  92 /* Default baud rate: 57600, 115200, 230400 or 460800 */
  93 #define DEFAULT_BAUD_RATE  115200
  94
  95
  96 /* Transmit states  */
  97 #define XMIT_SENDING    1
  98 #define XMIT_WAKEUP     2
  99 #define XMIT_WAITING    8
 100
 101 /* Receiver states */
 102 #define RECV_WAIT_PACKET_TYPE   0
 103 #define RECV_WAIT_EVENT_HEADER  1
 104 #define RECV_WAIT_ACL_HEADER    2
 105 #define RECV_WAIT_SCO_HEADER    3
 106 #define RECV_WAIT_DATA          4
 107
 108
 109
 110 /* ======================== Interrupt handling ======================== */
 111
 112
 113 static int btuart_write(unsigned int iobase, int fifo_size, __u8 *buf, int len)
 114 {
 115         int actual = 0;
 116
 117         /* Tx FIFO should be empty */
 118         if (!(inb(iobase + UART_LSR) & UART_LSR_THRE))
 119                 return 0;
 120
 121         /* Fill FIFO with current frame */
 122         while ((fifo_size-- > 0) && (actual < len)) {
 123                 /* Transmit next byte */
 124                 outb(buf[actual], iobase + UART_TX);
 125                 actual++;
 126         }
 127
 128         return actual;
 129 }
 130
 131
 132 static void btuart_write_wakeup(btuart_info_t *info)
 133 {
 134         if (!info) {
 135                 BT_ERR("Unknown device");
 136                 return;
 137         }
 138
 139         if (test_and_set_bit(XMIT_SENDING, &(info->tx_state))) {
 140                 set_bit(XMIT_WAKEUP, &(info->tx_state));
 141                 return;
 142         }
 143
 144         do {
 145                 register unsigned int iobase = info->p_dev->resource[0]->start;
 146                 register struct sk_buff *skb;
 147                 register int len;
 148
 149                 clear_bit(XMIT_WAKEUP, &(info->tx_state));
 150
 151                 if (!pcmcia_dev_present(info->p_dev))
 152                         return;
 153
 154                 if (!(skb = skb_dequeue(&(info->txq))))
 155                         break;
 156
 157                 /* Send frame */
 158                 len = btuart_write(iobase, 16, skb->data, skb->len);
 159                 set_bit(XMIT_WAKEUP, &(info->tx_state));
 160
 161                 if (len == skb->len) {
 162                         kfree_skb(skb);
 163                 } else {
 164                         skb_pull(skb, len);
 165                         skb_queue_head(&(info->txq), skb);
 166                 }
 167
 168                 info->hdev->stat.byte_tx += len;
 169
 170         } while (test_bit(XMIT_WAKEUP, &(info->tx_state)));
 171
 172         clear_bit(XMIT_SENDING, &(info->tx_state));
 173 }
 174
 175
 176 static void btuart_receive(btuart_info_t *info)
 177 {
 178         unsigned int iobase;
 179         int boguscount = 0;
 180
 181         if (!info) {
 182                 BT_ERR("Unknown device");
 183                 return;
 184         }
 185
 186         iobase = info->p_dev->resource[0]->start;
 187
 188         do {
 189                 info->hdev->stat.byte_rx++;
 190
 191                 /* Allocate packet */
 192                 if (info->rx_skb == NULL) {
 193                         info->rx_state = RECV_WAIT_PACKET_TYPE;
 194                         info->rx_count = 0;
 195                         if (!(info->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC))) {
 196                                 BT_ERR("Can't allocate mem for new packet");
 197                                 return;
 198                         }
 199                 }
 200
 201                 if (info->rx_state == RECV_WAIT_PACKET_TYPE) {
 202
 203                         info->rx_skb->dev = (void *) info->hdev;
 204                         bt_cb(info->rx_skb)->pkt_type = inb(iobase + UART_RX);
 205
 206                         switch (bt_cb(info->rx_skb)->pkt_type) {
 207
 208                         case HCI_EVENT_PKT:
 209                                 info->rx_state = RECV_WAIT_EVENT_HEADER;
 210                                 info->rx_count = HCI_EVENT_HDR_SIZE;
 211                                 break;
 212
 213                         case HCI_ACLDATA_PKT:
 214                                 info->rx_state = RECV_WAIT_ACL_HEADER;
 215                                 info->rx_count = HCI_ACL_HDR_SIZE;
 216                                 break;
 217
 218                         case HCI_SCODATA_PKT:
 219                                 info->rx_state = RECV_WAIT_SCO_HEADER;
 220                                 info->rx_count = HCI_SCO_HDR_SIZE;
 221                                 break;
 222
 223                         default:
 224                                 /* Unknown packet */
 225                                 BT_ERR("Unknown HCI packet with type 0x%02x received", bt_cb(info->rx_skb)->pkt_type);
 226                                 info->hdev->stat.err_rx++;
 227                                 clear_bit(HCI_RUNNING, &(info->hdev->flags));
 228
 229                                 kfree_skb(info->rx_skb);
 230                                 info->rx_skb = NULL;
 231                                 break;
 232
 233                         }
 234
 235                 } else {
 236
 237                         *skb_put(info->rx_skb, 1) = inb(iobase + UART_RX);
 238                         info->rx_count--;
 239
 240                         if (info->rx_count == 0) {
 241
 242                                 int dlen;
 243                                 struct hci_event_hdr *eh;
 244                                 struct hci_acl_hdr *ah;
 245                                 struct hci_sco_hdr *sh;
 246
 247
 248                                 switch (info->rx_state) {
 249
 250                                 case RECV_WAIT_EVENT_HEADER:
 251                                         eh = hci_event_hdr(info->rx_skb);
 252                                         info->rx_state = RECV_WAIT_DATA;
 253                                         info->rx_count = eh->plen;
 254                                         break;
 255
 256                                 case RECV_WAIT_ACL_HEADER:
 257                                         ah = hci_acl_hdr(info->rx_skb);
 258                                         dlen = __le16_to_cpu(ah->dlen);
 259                                         info->rx_state = RECV_WAIT_DATA;
 260                                         info->rx_count = dlen;
 261                                         break;
 262
 263                                 case RECV_WAIT_SCO_HEADER:
 264                                         sh = hci_sco_hdr(info->rx_skb);
 265                                         info->rx_state = RECV_WAIT_DATA;
 266                                         info->rx_count = sh->dlen;
 267                                         break;
 268
 269                                 case RECV_WAIT_DATA:
 270                                         hci_recv_frame(info->rx_skb);
 271                                         info->rx_skb = NULL;
 272                                         break;
 273
 274                                 }
 275
 276                         }
 277
 278                 }
 279
 280                 /* Make sure we don't stay here too long */
 281                 if (boguscount++ > 16)
 282                         break;
 283
 284         } while (inb(iobase + UART_LSR) & UART_LSR_DR);
 285 }
 286
 287
 288 static irqreturn_t btuart_interrupt(int irq, void *dev_inst)
 289 {
 290         btuart_info_t *info = dev_inst;
 291         unsigned int iobase;
 292         int boguscount = 0;
 293         int iir, lsr;
 294         irqreturn_t r = IRQ_NONE;
 295
 296         if (!info || !info->hdev)
 297                 /* our irq handler is shared */
 298                 return IRQ_NONE;
 299
 300         iobase = info->p_dev->resource[0]->start;
 301
 302         spin_lock(&(info->lock));
 303
 304         iir = inb(iobase + UART_IIR) & UART_IIR_ID;
 305         while (iir) {
 306                 r = IRQ_HANDLED;
 307
 308                 /* Clear interrupt */
 309                 lsr = inb(iobase + UART_LSR);
 310
 311                 switch (iir) {
 312                 case UART_IIR_RLSI:
 313                         BT_ERR("RLSI");
 314                         break;
 315                 case UART_IIR_RDI:
 316                         /* Receive interrupt */
 317                         btuart_receive(info);
 318                         break;
 319                 case UART_IIR_THRI:
 320                         if (lsr & UART_LSR_THRE) {
 321                                 /* Transmitter ready for data */
 322                                 btuart_write_wakeup(info);
 323                         }
 324                         break;
 325                 default:
 326                         BT_ERR("Unhandled IIR=%#x", iir);
 327                         break;
 328                 }
 329
 330                 /* Make sure we don't stay here too long */
 331                 if (boguscount++ > 100)
 332                         break;
 333
 334                 iir = inb(iobase + UART_IIR) & UART_IIR_ID;
 335
 336         }
 337
 338         spin_unlock(&(info->lock));
 339
 340         return r;
 341 }
 342
 343
 344 static void btuart_change_speed(btuart_info_t *info, unsigned int speed)
 345 {
 346         unsigned long flags;
 347         unsigned int iobase;
 348         int fcr;                /* FIFO control reg */
 349         int lcr;                /* Line control reg */
 350         int divisor;
 351
 352         if (!info) {
 353                 BT_ERR("Unknown device");
 354                 return;
 355         }
 356
 357         iobase = info->p_dev->resource[0]->start;
 358
 359         spin_lock_irqsave(&(info->lock), flags);
 360
 361         /* Turn off interrupts */
 362         outb(0, iobase + UART_IER);
 363
 364         divisor = SPEED_MAX / speed;
 365
 366         fcr = UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT;
 367
 368         /*
 369          * Use trigger level 1 to avoid 3 ms. timeout delay at 9600 bps, and
 370          * almost 1,7 ms at 19200 bps. At speeds above that we can just forget
 371          * about this timeout since it will always be fast enough.
 372          */
 373
 374         if (speed < 38400)
 375                 fcr |= UART_FCR_TRIGGER_1;
 376         else
 377                 fcr |= UART_FCR_TRIGGER_14;
 378
 379         /* Bluetooth cards use 8N1 */
 380         lcr = UART_LCR_WLEN8;
 381
 382         outb(UART_LCR_DLAB | lcr, iobase + UART_LCR);   /* Set DLAB */
 383         outb(divisor & 0xff, iobase + UART_DLL);        /* Set speed */
 384         outb(divisor >> 8, iobase + UART_DLM);
 385         outb(lcr, iobase + UART_LCR);   /* Set 8N1  */
 386         outb(fcr, iobase + UART_FCR);   /* Enable FIFO's */
 387
 388         /* Turn on interrupts */
 389         outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER);
 390
 391         spin_unlock_irqrestore(&(info->lock), flags);
 392 }
 393
 394
 395
 396 /* ======================== HCI interface ======================== */
 397
 398
 399 static int btuart_hci_flush(struct hci_dev *hdev)
 400 {
 401         btuart_info_t *info = (btuart_info_t *)(hdev->driver_data);
 402
 403         /* Drop TX queue */
 404         skb_queue_purge(&(info->txq));
 405
 406         return 0;
 407 }
 408
 409
 410 static int btuart_hci_open(struct hci_dev *hdev)
 411 {
 412         set_bit(HCI_RUNNING, &(hdev->flags));
 413
 414         return 0;
 415 }
 416
 417
 418 static int btuart_hci_close(struct hci_dev *hdev)
 419 {
 420         if (!test_and_clear_bit(HCI_RUNNING, &(hdev->flags)))
 421                 return 0;
 422
 423         btuart_hci_flush(hdev);
 424
 425         return 0;
 426 }
 427
 428
 429 static int btuart_hci_send_frame(struct sk_buff *skb)
 430 {
 431         btuart_info_t *info;
 432         struct hci_dev *hdev = (struct hci_dev *)(skb->dev);
 433
 434         if (!hdev) {
 435                 BT_ERR("Frame for unknown HCI device (hdev=NULL)");
 436                 return -ENODEV;
 437         }
 438
 439         info = (btuart_info_t *)(hdev->driver_data);
 440
 441         switch (bt_cb(skb)->pkt_type) {
 442         case HCI_COMMAND_PKT:
 443                 hdev->stat.cmd_tx++;
 444                 break;
 445         case HCI_ACLDATA_PKT:
 446                 hdev->stat.acl_tx++;
 447                 break;
 448         case HCI_SCODATA_PKT:
 449                 hdev->stat.sco_tx++;
 450                 break;
 451         };
 452
 453         /* Prepend skb with frame type */
 454         memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1);
 455         skb_queue_tail(&(info->txq), skb);
 456
 457         btuart_write_wakeup(info);
 458
 459         return 0;
 460 }
 461
 462
 463 static void btuart_hci_destruct(struct hci_dev *hdev)
 464 {
 465 }
 466
 467
 468 static int btuart_hci_ioctl(struct hci_dev *hdev, unsigned int cmd, unsigned long arg)
 469 {
 470         return -ENOIOCTLCMD;
 471 }
 472
 473
 474
 475 /* ======================== Card services HCI interaction ======================== */
 476
 477
 478 static int btuart_open(btuart_info_t *info)
 479 {
 480         unsigned long flags;
 481         unsigned int iobase = info->p_dev->resource[0]->start;
 482         struct hci_dev *hdev;
 483
 484         spin_lock_init(&(info->lock));
 485
 486         skb_queue_head_init(&(info->txq));
 487
 488         info->rx_state = RECV_WAIT_PACKET_TYPE;
 489         info->rx_count = 0;
 490         info->rx_skb = NULL;
 491
 492         /* Initialize HCI device */
 493         hdev = hci_alloc_dev();
 494         if (!hdev) {
 495                 BT_ERR("Can't allocate HCI device");
 496                 return -ENOMEM;
 497         }
 498
 499         info->hdev = hdev;
 500
 501         hdev->bus = HCI_PCCARD;
 502         hdev->driver_data = info;
 503         SET_HCIDEV_DEV(hdev, &info->p_dev->dev);
 504
 505         hdev->open     = btuart_hci_open;
 506         hdev->close    = btuart_hci_close;
 507         hdev->flush    = btuart_hci_flush;
 508         hdev->send     = btuart_hci_send_frame;
 509         hdev->destruct = btuart_hci_destruct;
 510         hdev->ioctl    = btuart_hci_ioctl;
 511
 512         hdev->owner = THIS_MODULE;
 513
 514         spin_lock_irqsave(&(info->lock), flags);
 515
 516         /* Reset UART */
 517         outb(0, iobase + UART_MCR);
 518
 519         /* Turn off interrupts */
 520         outb(0, iobase + UART_IER);
 521
 522         /* Initialize UART */
 523         outb(UART_LCR_WLEN8, iobase + UART_LCR);        /* Reset DLAB */
 524         outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase + UART_MCR);
 525
 526         /* Turn on interrupts */
 527         // outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER);
 528
 529         spin_unlock_irqrestore(&(info->lock), flags);
 530
 531         btuart_change_speed(info, DEFAULT_BAUD_RATE);
 532
 533         /* Timeout before it is safe to send the first HCI packet */
 534         msleep(1000);
 535
 536         /* Register HCI device */
 537         if (hci_register_dev(hdev) < 0) {
 538                 BT_ERR("Can't register HCI device");
 539                 info->hdev = NULL;
 540                 hci_free_dev(hdev);
 541                 return -ENODEV;
 542         }
 543
 544         return 0;
 545 }
 546
 547
 548 static int btuart_close(btuart_info_t *info)
 549 {
 550         unsigned long flags;
 551         unsigned int iobase = info->p_dev->resource[0]->start;
 552         struct hci_dev *hdev = info->hdev;
 553
 554         if (!hdev)
 555                 return -ENODEV;
 556
 557         btuart_hci_close(hdev);
 558
 559         spin_lock_irqsave(&(info->lock), flags);
 560
 561         /* Reset UART */
 562         outb(0, iobase + UART_MCR);
 563
 564         /* Turn off interrupts */
 565         outb(0, iobase + UART_IER);
 566
 567         spin_unlock_irqrestore(&(info->lock), flags);
 568
 569         if (hci_unregister_dev(hdev) < 0)
 570                 BT_ERR("Can't unregister HCI device %s", hdev->name);
 571
 572         hci_free_dev(hdev);
 573
 574         return 0;
 575 }
 576
 577 static int btuart_probe(struct pcmcia_device *link)
 578 {
 579         btuart_info_t *info;
 580
 581         /* Create new info device */
 582         info = kzalloc(sizeof(*info), GFP_KERNEL);
 583         if (!info)
 584                 return -ENOMEM;
 585
 586         info->p_dev = link;
 587         link->priv = info;
 588
 589         link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
 590         link->resource[0]->end = 8;
 591
 592         link->conf.Attributes = CONF_ENABLE_IRQ;
 593         link->conf.IntType = INT_MEMORY_AND_IO;
 594
 595         return btuart_config(link);
 596 }
 597
 598
 599 static void btuart_detach(struct pcmcia_device *link)
 600 {
 601         btuart_info_t *info = link->priv;
 602
 603         btuart_release(link);
 604         kfree(info);
 605 }
 606
 607 static int btuart_check_config(struct pcmcia_device *p_dev,
 608                                cistpl_cftable_entry_t *cf,
 609                                cistpl_cftable_entry_t *dflt,
 610                                unsigned int vcc,
 611                                void *priv_data)
 612 {
 613         int *try = priv_data;
 614
 615         p_dev->io_lines = (try == 0) ? 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
 616
 617         if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
 618                 p_dev->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
 619         if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) &&
 620             (cf->io.win[0].base != 0)) {
 621                 p_dev->resource[0]->start = cf->io.win[0].base;
 622                 if (!pcmcia_request_io(p_dev))
 623                         return 0;
 624         }
 625         return -ENODEV;
 626 }
 627
 628 static int btuart_check_config_notpicky(struct pcmcia_device *p_dev,
 629                                         cistpl_cftable_entry_t *cf,
 630                                         cistpl_cftable_entry_t *dflt,
 631                                         unsigned int vcc,
 632                                         void *priv_data)
 633 {
 634         static unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
 635         int j;
 636
 637         if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
 638                 for (j = 0; j < 5; j++) {
 639                         p_dev->resource[0]->start = base[j];
 640                         p_dev->io_lines = base[j] ? 16 : 3;
 641                         if (!pcmcia_request_io(p_dev))
 642                                 return 0;
 643                 }
 644         }
 645         return -ENODEV;
 646 }
 647
 648 static int btuart_config(struct pcmcia_device *link)
 649 {
 650         btuart_info_t *info = link->priv;
 651         int i;
 652         int try;
 653
 654         /* First pass: look for a config entry that looks normal.
 655            Two tries: without IO aliases, then with aliases */
 656         for (try = 0; try < 2; try++)
 657                 if (!pcmcia_loop_config(link, btuart_check_config, &try))
 658                         goto found_port;
 659
 660         /* Second pass: try to find an entry that isn't picky about
 661            its base address, then try to grab any standard serial port
 662            address, and finally try to get any free port. */
 663         if (!pcmcia_loop_config(link, btuart_check_config_notpicky, NULL))
 664                 goto found_port;
 665
 666         BT_ERR("No usable port range found");
 667         goto failed;
 668
 669 found_port:
 670         i = pcmcia_request_irq(link, btuart_interrupt);
 671         if (i != 0)
 672                 goto failed;
 673
 674         i = pcmcia_request_configuration(link, &link->conf);
 675         if (i != 0)
 676                 goto failed;
 677
 678         if (btuart_open(info) != 0)
 679                 goto failed;
 680
 681         return 0;
 682
 683 failed:
 684         btuart_release(link);
 685         return -ENODEV;
 686 }
 687
 688
 689 static void btuart_release(struct pcmcia_device *link)
 690 {
 691         btuart_info_t *info = link->priv;
 692
 693         btuart_close(info);
 694
 695         pcmcia_disable_device(link);
 696 }
 697
 698 static struct pcmcia_device_id btuart_ids[] = {
 699         /* don't use this driver. Use serial_cs + hci_uart instead */
 700         PCMCIA_DEVICE_NULL
 701 };
 702 MODULE_DEVICE_TABLE(pcmcia, btuart_ids);
 703
 704 static struct pcmcia_driver btuart_driver = {
 705         .owner          = THIS_MODULE,
 706         .drv            = {
 707                 .name   = "btuart_cs",
 708         },
 709         .probe          = btuart_probe,
 710         .remove         = btuart_detach,
 711         .id_table       = btuart_ids,
 712 };
 713
 714 static int __init init_btuart_cs(void)
 715 {
 716         return pcmcia_register_driver(&btuart_driver);
 717 }
 718
 719
 720 static void __exit exit_btuart_cs(void)
 721 {
 722         pcmcia_unregister_driver(&btuart_driver);
 723 }
 724
 725 module_init(init_btuart_cs);
 726 module_exit(exit_btuart_cs);