2 * Copyright (c) 2008-2009 Atheros Communications Inc.
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License as published by
6 * the Free Software Foundation; either version 2 of the License, or
7 * (at your option) any later version.
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software
16 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
21 #include <linux/module.h>
22 #include <linux/kernel.h>
23 #include <linux/init.h>
24 #include <linux/slab.h>
25 #include <linux/types.h>
26 #include <linux/errno.h>
27 #include <linux/device.h>
28 #include <linux/firmware.h>
29 #include <linux/usb.h>
30 #include <net/bluetooth/bluetooth.h>
34 #define ATH3K_DNLOAD 0x01
35 #define ATH3K_GETSTATE 0x05
36 #define ATH3K_SET_NORMAL_MODE 0x07
37 #define ATH3K_GETVERSION 0x09
38 #define USB_REG_SWITCH_VID_PID 0x0a
40 #define ATH3K_MODE_MASK 0x3F
41 #define ATH3K_NORMAL_MODE 0x0E
43 #define ATH3K_PATCH_UPDATE 0x80
44 #define ATH3K_SYSCFG_UPDATE 0x40
46 #define ATH3K_XTAL_FREQ_26M 0x00
47 #define ATH3K_XTAL_FREQ_40M 0x01
48 #define ATH3K_XTAL_FREQ_19P2 0x02
49 #define ATH3K_NAME_LEN 0xFF
51 struct ath3k_version {
52 unsigned int rom_version;
53 unsigned int build_version;
54 unsigned int ram_version;
55 unsigned char ref_clock;
56 unsigned char reserved[0x07];
59 static struct usb_device_id ath3k_table[] = {
61 { USB_DEVICE(0x0CF3, 0x3000) },
63 /* Atheros AR3011 with sflash firmware*/
64 { USB_DEVICE(0x0CF3, 0x3002) },
65 { USB_DEVICE(0x13d3, 0x3304) },
66 { USB_DEVICE(0x0930, 0x0215) },
67 { USB_DEVICE(0x0489, 0xE03D) },
69 /* Atheros AR9285 Malbec with sflash firmware */
70 { USB_DEVICE(0x03F0, 0x311D) },
72 /* Atheros AR3012 with sflash firmware*/
73 { USB_DEVICE(0x0CF3, 0x3004) },
74 { USB_DEVICE(0x0CF3, 0x311D) },
75 { USB_DEVICE(0x13d3, 0x3375) },
76 { USB_DEVICE(0x04CA, 0x3005) },
77 { USB_DEVICE(0x13d3, 0x3362) },
78 { USB_DEVICE(0x0CF3, 0xE004) },
80 /* Atheros AR5BBU12 with sflash firmware */
81 { USB_DEVICE(0x0489, 0xE02C) },
83 /* Atheros AR5BBU22 with sflash firmware */
84 { USB_DEVICE(0x0489, 0xE03C) },
86 { } /* Terminating entry */
89 MODULE_DEVICE_TABLE(usb, ath3k_table);
91 #define BTUSB_ATH3012 0x80
92 /* This table is to load patch and sysconfig files
94 static struct usb_device_id ath3k_blist_tbl[] = {
96 /* Atheros AR3012 with sflash firmware*/
97 { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
98 { USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 },
99 { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
100 { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
101 { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
102 { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
104 /* Atheros AR5BBU22 with sflash firmware */
105 { USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
107 { } /* Terminating entry */
110 #define USB_REQ_DFU_DNLOAD 1
111 #define BULK_SIZE 4096
112 #define FW_HDR_SIZE 20
114 static int ath3k_load_firmware(struct usb_device *udev,
115 const struct firmware *firmware)
118 int err, pipe, len, size, sent = 0;
119 int count = firmware->size;
121 BT_DBG("udev %p", udev);
123 pipe = usb_sndctrlpipe(udev, 0);
125 send_buf = kmalloc(BULK_SIZE, GFP_KERNEL);
127 BT_ERR("Can't allocate memory chunk for firmware");
131 memcpy(send_buf, firmware->data, 20);
132 if ((err = usb_control_msg(udev, pipe,
134 USB_TYPE_VENDOR, 0, 0,
135 send_buf, 20, USB_CTRL_SET_TIMEOUT)) < 0) {
136 BT_ERR("Can't change to loading configuration err");
143 size = min_t(uint, count, BULK_SIZE);
144 pipe = usb_sndbulkpipe(udev, 0x02);
145 memcpy(send_buf, firmware->data + sent, size);
147 err = usb_bulk_msg(udev, pipe, send_buf, size,
150 if (err || (len != size)) {
151 BT_ERR("Error in firmware loading err = %d,"
152 "len = %d, size = %d", err, len, size);
165 static int ath3k_get_state(struct usb_device *udev, unsigned char *state)
169 pipe = usb_rcvctrlpipe(udev, 0);
170 return usb_control_msg(udev, pipe, ATH3K_GETSTATE,
171 USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
172 state, 0x01, USB_CTRL_SET_TIMEOUT);
175 static int ath3k_get_version(struct usb_device *udev,
176 struct ath3k_version *version)
180 pipe = usb_rcvctrlpipe(udev, 0);
181 return usb_control_msg(udev, pipe, ATH3K_GETVERSION,
182 USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, version,
183 sizeof(struct ath3k_version),
184 USB_CTRL_SET_TIMEOUT);
187 static int ath3k_load_fwfile(struct usb_device *udev,
188 const struct firmware *firmware)
191 int err, pipe, len, size, count, sent = 0;
194 count = firmware->size;
196 send_buf = kmalloc(BULK_SIZE, GFP_KERNEL);
198 BT_ERR("Can't allocate memory chunk for firmware");
202 size = min_t(uint, count, FW_HDR_SIZE);
203 memcpy(send_buf, firmware->data, size);
205 pipe = usb_sndctrlpipe(udev, 0);
206 ret = usb_control_msg(udev, pipe, ATH3K_DNLOAD,
207 USB_TYPE_VENDOR, 0, 0, send_buf,
208 size, USB_CTRL_SET_TIMEOUT);
210 BT_ERR("Can't change to loading configuration err");
219 size = min_t(uint, count, BULK_SIZE);
220 pipe = usb_sndbulkpipe(udev, 0x02);
222 memcpy(send_buf, firmware->data + sent, size);
224 err = usb_bulk_msg(udev, pipe, send_buf, size,
226 if (err || (len != size)) {
227 BT_ERR("Error in firmware loading err = %d,"
228 "len = %d, size = %d", err, len, size);
240 static int ath3k_switch_pid(struct usb_device *udev)
244 pipe = usb_sndctrlpipe(udev, 0);
245 return usb_control_msg(udev, pipe, USB_REG_SWITCH_VID_PID,
246 USB_TYPE_VENDOR, 0, 0,
247 NULL, 0, USB_CTRL_SET_TIMEOUT);
250 static int ath3k_set_normal_mode(struct usb_device *udev)
252 unsigned char fw_state;
255 ret = ath3k_get_state(udev, &fw_state);
257 BT_ERR("Can't get state to change to normal mode err");
261 if ((fw_state & ATH3K_MODE_MASK) == ATH3K_NORMAL_MODE) {
262 BT_DBG("firmware was already in normal mode");
266 pipe = usb_sndctrlpipe(udev, 0);
267 return usb_control_msg(udev, pipe, ATH3K_SET_NORMAL_MODE,
268 USB_TYPE_VENDOR, 0, 0,
269 NULL, 0, USB_CTRL_SET_TIMEOUT);
272 static int ath3k_load_patch(struct usb_device *udev)
274 unsigned char fw_state;
275 char filename[ATH3K_NAME_LEN] = {0};
276 const struct firmware *firmware;
277 struct ath3k_version fw_version, pt_version;
280 ret = ath3k_get_state(udev, &fw_state);
282 BT_ERR("Can't get state to change to load ram patch err");
286 if (fw_state & ATH3K_PATCH_UPDATE) {
287 BT_DBG("Patch was already downloaded");
291 ret = ath3k_get_version(udev, &fw_version);
293 BT_ERR("Can't get version to change to load ram patch err");
297 snprintf(filename, ATH3K_NAME_LEN, "ar3k/AthrBT_0x%08x.dfu",
298 fw_version.rom_version);
300 ret = request_firmware(&firmware, filename, &udev->dev);
302 BT_ERR("Patch file not found %s", filename);
306 pt_version.rom_version = *(int *)(firmware->data + firmware->size - 8);
307 pt_version.build_version = *(int *)
308 (firmware->data + firmware->size - 4);
310 if ((pt_version.rom_version != fw_version.rom_version) ||
311 (pt_version.build_version <= fw_version.build_version)) {
312 BT_ERR("Patch file version did not match with firmware");
313 release_firmware(firmware);
317 ret = ath3k_load_fwfile(udev, firmware);
318 release_firmware(firmware);
323 static int ath3k_load_syscfg(struct usb_device *udev)
325 unsigned char fw_state;
326 char filename[ATH3K_NAME_LEN] = {0};
327 const struct firmware *firmware;
328 struct ath3k_version fw_version;
331 ret = ath3k_get_state(udev, &fw_state);
333 BT_ERR("Can't get state to change to load configration err");
337 ret = ath3k_get_version(udev, &fw_version);
339 BT_ERR("Can't get version to change to load ram patch err");
343 switch (fw_version.ref_clock) {
345 case ATH3K_XTAL_FREQ_26M:
348 case ATH3K_XTAL_FREQ_40M:
351 case ATH3K_XTAL_FREQ_19P2:
359 snprintf(filename, ATH3K_NAME_LEN, "ar3k/ramps_0x%08x_%d%s",
360 fw_version.rom_version, clk_value, ".dfu");
362 ret = request_firmware(&firmware, filename, &udev->dev);
364 BT_ERR("Configuration file not found %s", filename);
368 ret = ath3k_load_fwfile(udev, firmware);
369 release_firmware(firmware);
374 static int ath3k_probe(struct usb_interface *intf,
375 const struct usb_device_id *id)
377 const struct firmware *firmware;
378 struct usb_device *udev = interface_to_usbdev(intf);
381 BT_DBG("intf %p id %p", intf, id);
383 if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
386 /* match device ID in ath3k blacklist table */
387 if (!id->driver_info) {
388 const struct usb_device_id *match;
389 match = usb_match_id(intf, ath3k_blist_tbl);
394 /* load patch and sysconfig files for AR3012 */
395 if (id->driver_info & BTUSB_ATH3012) {
397 /* New firmware with patch and sysconfig files already loaded */
398 if (le16_to_cpu(udev->descriptor.bcdDevice) > 0x0001)
401 ret = ath3k_load_patch(udev);
403 BT_ERR("Loading patch file failed");
406 ret = ath3k_load_syscfg(udev);
408 BT_ERR("Loading sysconfig file failed");
411 ret = ath3k_set_normal_mode(udev);
413 BT_ERR("Set normal mode failed");
416 ath3k_switch_pid(udev);
420 if (request_firmware(&firmware, "ath3k-1.fw", &udev->dev) < 0) {
421 BT_ERR("Error loading firmware");
425 ret = ath3k_load_firmware(udev, firmware);
426 release_firmware(firmware);
431 static void ath3k_disconnect(struct usb_interface *intf)
433 BT_DBG("ath3k_disconnect intf %p", intf);
436 static struct usb_driver ath3k_driver = {
438 .probe = ath3k_probe,
439 .disconnect = ath3k_disconnect,
440 .id_table = ath3k_table,
443 static int __init ath3k_init(void)
445 BT_INFO("Atheros AR30xx firmware driver ver %s", VERSION);
446 return usb_register(&ath3k_driver);
449 static void __exit ath3k_exit(void)
451 usb_deregister(&ath3k_driver);
454 module_init(ath3k_init);
455 module_exit(ath3k_exit);
457 MODULE_AUTHOR("Atheros Communications");
458 MODULE_DESCRIPTION("Atheros AR30xx firmware driver");
459 MODULE_VERSION(VERSION);
460 MODULE_LICENSE("GPL");
461 MODULE_FIRMWARE("ath3k-1.fw");