2 * pata_cmd640.c - CMD640 PCI PATA for new ATA layer
4 * Alan Cox <alan@redhat.com>
7 * linux/drivers/ide/pci/cmd640.c Version 1.02 Sep 01, 1996
9 * Copyright (C) 1995-1996 Linus Torvalds & authors (see driver)
11 * This drives only the PCI version of the controller. If you have a
12 * VLB one then we have enough docs to support it but you can write
16 #include <linux/kernel.h>
17 #include <linux/module.h>
18 #include <linux/pci.h>
19 #include <linux/init.h>
20 #include <linux/blkdev.h>
21 #include <linux/delay.h>
22 #include <scsi/scsi_host.h>
23 #include <linux/libata.h>
25 #define DRV_NAME "pata_cmd640"
26 #define DRV_VERSION "0.0.3"
30 u8 reg58[ATA_MAX_DEVICES];
45 * cmd640_set_piomode - set initial PIO mode data
48 * Called to do the PIO mode setup.
51 static void cmd640_set_piomode(struct ata_port *ap, struct ata_device *adev)
53 struct cmd640_reg *timing = ap->private_data;
54 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
56 const unsigned long T = 1000000 / 33;
57 const u8 setup_data[] = { 0x40, 0x40, 0x40, 0x80, 0x00 };
59 int arttim = ARTIM0 + 2 * adev->devno;
60 struct ata_device *pair = ata_dev_pair(adev);
62 if (ata_timing_compute(adev, adev->pio_mode, &t, T, 0) < 0) {
63 printk(KERN_ERR DRV_NAME ": mode computation failed.\n");
67 /* The second channel has shared timings and the setup timing is
68 messy to switch to merge it for worst case */
69 if (ap->port_no && pair) {
71 ata_timing_compute(pair, pair->pio_mode, &p, T, 1);
72 ata_timing_merge(&p, &t, &t, ATA_TIMING_SETUP);
75 /* Make the timings fit */
77 t.active += t.recover - 16;
83 /* Now convert the clocks into values we can actually stuff into
87 t.recover--; /* 640B only */
94 t.setup = setup_data[t.setup];
96 if (ap->port_no == 0) {
97 t.active &= 0x0F; /* 0 = 16 */
99 /* Load setup timing */
100 pci_read_config_byte(pdev, arttim, ®);
103 pci_write_config_byte(pdev, arttim, reg);
105 /* Load active/recovery */
106 pci_write_config_byte(pdev, arttim + 1, (t.active << 4) | t.recover);
108 /* Save the shared timings for channel, they will be loaded
109 by qc_issue_prot. Reloading the setup time is expensive
110 so we keep a merged one loaded */
111 pci_read_config_byte(pdev, ARTIM23, ®);
114 pci_write_config_byte(pdev, ARTIM23, reg);
115 timing->reg58[adev->devno] = (t.active << 4) | t.recover;
121 * cmd640_qc_issue_prot - command preparation hook
122 * @qc: Command to be issued
124 * Channel 1 has shared timings. We must reprogram the
125 * clock each drive 2/3 switch we do.
128 static unsigned int cmd640_qc_issue_prot(struct ata_queued_cmd *qc)
130 struct ata_port *ap = qc->ap;
131 struct ata_device *adev = qc->dev;
132 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
133 struct cmd640_reg *timing = ap->private_data;
135 if (ap->port_no != 0 && adev->devno != timing->last) {
136 pci_write_config_byte(pdev, DRWTIM23, timing->reg58[adev->devno]);
137 timing->last = adev->devno;
139 return ata_qc_issue_prot(qc);
143 * cmd640_port_start - port setup
144 * @ap: ATA port being set up
146 * The CMD640 needs to maintain private data structures so we
147 * allocate space here.
150 static int cmd640_port_start(struct ata_port *ap)
152 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
153 struct cmd640_reg *timing;
155 int ret = ata_port_start(ap);
159 timing = devm_kzalloc(&pdev->dev, sizeof(struct cmd640_reg), GFP_KERNEL);
162 timing->last = -1; /* Force a load */
163 ap->private_data = timing;
167 static struct scsi_host_template cmd640_sht = {
168 .module = THIS_MODULE,
170 .ioctl = ata_scsi_ioctl,
171 .queuecommand = ata_scsi_queuecmd,
172 .can_queue = ATA_DEF_QUEUE,
173 .this_id = ATA_SHT_THIS_ID,
174 .sg_tablesize = LIBATA_MAX_PRD,
175 .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
176 .emulated = ATA_SHT_EMULATED,
177 .use_clustering = ATA_SHT_USE_CLUSTERING,
178 .proc_name = DRV_NAME,
179 .dma_boundary = ATA_DMA_BOUNDARY,
180 .slave_configure = ata_scsi_slave_config,
181 .slave_destroy = ata_scsi_slave_destroy,
182 .bios_param = ata_std_bios_param,
183 .resume = ata_scsi_device_resume,
184 .suspend = ata_scsi_device_suspend,
187 static struct ata_port_operations cmd640_port_ops = {
188 .port_disable = ata_port_disable,
189 .set_piomode = cmd640_set_piomode,
190 .mode_filter = ata_pci_default_filter,
191 .tf_load = ata_tf_load,
192 .tf_read = ata_tf_read,
193 .check_status = ata_check_status,
194 .exec_command = ata_exec_command,
195 .dev_select = ata_std_dev_select,
197 .freeze = ata_bmdma_freeze,
198 .thaw = ata_bmdma_thaw,
199 .error_handler = ata_bmdma_error_handler,
200 .post_internal_cmd = ata_bmdma_post_internal_cmd,
201 .cable_detect = ata_cable_40wire,
203 .bmdma_setup = ata_bmdma_setup,
204 .bmdma_start = ata_bmdma_start,
205 .bmdma_stop = ata_bmdma_stop,
206 .bmdma_status = ata_bmdma_status,
208 .qc_prep = ata_qc_prep,
209 .qc_issue = cmd640_qc_issue_prot,
211 /* In theory this is not needed once we kill the prefetcher */
212 .data_xfer = ata_data_xfer_noirq,
214 .irq_handler = ata_interrupt,
215 .irq_clear = ata_bmdma_irq_clear,
216 .irq_on = ata_irq_on,
217 .irq_ack = ata_irq_ack,
219 .port_start = cmd640_port_start,
222 static int cmd640_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
227 static struct ata_port_info info = {
229 .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
231 .port_ops = &cmd640_port_ops
234 static struct ata_port_info *port_info[2] = { &info, &info };
236 /* CMD640 detected, commiserations */
237 pci_write_config_byte(pdev, 0x5C, 0x00);
238 /* Get version info */
239 pci_read_config_byte(pdev, CFR, &r);
240 /* PIO0 command cycles */
241 pci_write_config_byte(pdev, CMDTIM, 0);
242 /* 512 byte bursts (sector) */
243 pci_write_config_byte(pdev, BRST, 0x40);
245 * A reporter a long time ago
246 * Had problems with the data fifo
247 * So don't run the risk
248 * Of putting crap on the disk
249 * For its better just to go slow
252 pci_read_config_byte(pdev, CNTRL, &ctrl);
253 pci_write_config_byte(pdev, CNTRL, ctrl | 0xC0);
254 /* Ditto for channel 1 */
255 pci_read_config_byte(pdev, ARTIM23, &ctrl);
257 pci_write_config_byte(pdev, ARTIM23, ctrl);
259 return ata_pci_init_one(pdev, port_info, 2);
262 static int cmd640_reinit_one(struct pci_dev *pdev)
264 return ata_pci_device_resume(pdev);
267 static const struct pci_device_id cmd640[] = {
268 { PCI_VDEVICE(CMD, 0x640), 0 },
272 static struct pci_driver cmd640_pci_driver = {
275 .probe = cmd640_init_one,
276 .remove = ata_pci_remove_one,
277 .suspend = ata_pci_device_suspend,
278 .resume = cmd640_reinit_one,
281 static int __init cmd640_init(void)
283 return pci_register_driver(&cmd640_pci_driver);
286 static void __exit cmd640_exit(void)
288 pci_unregister_driver(&cmd640_pci_driver);
291 MODULE_AUTHOR("Alan Cox");
292 MODULE_DESCRIPTION("low-level driver for CMD640 PATA controllers");
293 MODULE_LICENSE("GPL");
294 MODULE_DEVICE_TABLE(pci, cmd640);
295 MODULE_VERSION(DRV_VERSION);
297 module_init(cmd640_init);
298 module_exit(cmd640_exit);