2 # SATA/PATA driver configuration
5 config HAVE_PATA_PLATFORM
8 This is an internal configuration node for any machine that
9 uses pata-platform driver to enable the relevant driver in the
10 configuration structure without having to submit endless patches
11 to update the PATA_PLATFORM entry.
14 tristate "Serial ATA and Parallel ATA drivers"
17 depends on !(M32R || M68K) || BROKEN
20 If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or
21 any other ATA device under Linux, say Y and make sure that you know
22 the name of your ATA host adapter (the card inside your computer
23 that "speaks" the ATA protocol, also called ATA controller),
24 because you will be asked for it.
26 NOTE: ATA enables basic SCSI support; *however*,
27 'SCSI disk support', 'SCSI tape support', or
28 'SCSI CDROM support' may also be needed,
29 depending on your hardware configuration.
33 config ATA_NONSTANDARD
37 config ATA_VERBOSE_ERROR
38 bool "Verbose ATA error reporting"
41 This option adds parsing of ATA command descriptions and error bits
42 in libata kernel output, making it easier to interpret.
43 This option will enlarge the kernel by approx. 6KB. Disable it only
44 if kernel size is more important than ease of debugging.
49 bool "ATA ACPI Support"
50 depends on ACPI && PCI
53 This option adds support for ATA-related ACPI objects.
54 These ACPI objects add the ability to retrieve taskfiles
55 from the ACPI BIOS and write them to the disk controller.
56 These objects may be related to performance, security,
57 power management, or other areas.
58 You can disable this at kernel boot time by using the
59 option libata.noacpi=1
62 bool "SATA Port Multiplier support"
65 This option adds support for SATA Port Multipliers
66 (the SATA version of an ethernet hub, or SAS expander).
68 comment "Controllers with non-SFF native interface"
71 tristate "AHCI SATA support"
74 This option enables support for AHCI Serial ATA.
78 config SATA_AHCI_PLATFORM
79 tristate "Platform AHCI SATA support"
81 This option enables support for Platform AHCI Serial ATA
87 tristate "Freescale 3.0Gbps SATA support"
90 This option enables support for Freescale 3.0Gbps SATA controller.
91 It can be found on MPC837x and MPC8315.
96 tristate "Initio 162x SATA support"
99 This option enables support for Initio 162x Serial ATA.
101 config SATA_ACARD_AHCI
102 tristate "ACard AHCI variant (ATP 8620)"
105 This option enables support for Acard.
110 tristate "Silicon Image 3124/3132 SATA support"
113 This option enables support for Silicon Image 3124/3132 Serial ATA.
118 bool "ATA SFF support"
121 This option adds support for ATA controllers with SFF
122 compliant or similar programming interface.
124 SFF is the legacy IDE interface that has been around since
125 the dawn of time. Almost all PATA controllers have an
126 SFF interface. Many SATA controllers have an SFF interface
127 when configured into a legacy compatibility mode.
129 For users with exclusively modern controllers like AHCI,
130 Silicon Image 3124, or Marvell 6440, you may choose to
131 disable this unneeded SFF support.
137 comment "SFF controllers with custom DMA interface"
140 tristate "Pacific Digital ADMA support"
143 This option enables support for Pacific Digital ADMA controllers
147 config PATA_OCTEON_CF
148 tristate "OCTEON Boot Bus Compact Flash support"
149 depends on CPU_CAVIUM_OCTEON
151 This option enables a polled compact flash driver for use with
152 compact flash cards attached to the OCTEON boot bus.
157 tristate "Pacific Digital SATA QStor support"
160 This option enables support for Pacific Digital Serial ATA QStor.
165 tristate "Promise SATA SX4 support (Experimental)"
166 depends on PCI && EXPERIMENTAL
168 This option enables support for Promise Serial ATA SX4.
173 bool "ATA BMDMA support"
176 This option adds support for SFF ATA controllers with BMDMA
177 capability. BMDMA stands for bus-master DMA and is the
178 de facto DMA interface for SFF controllers.
184 comment "SATA SFF controllers with BMDMA"
187 tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
190 This option enables support for ICH5/6/7/8 Serial ATA
191 and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
197 tristate "DesignWare Cores SATA support"
200 This option enables support for the on-chip SATA controller of the
201 AppliedMicro processor 460EX.
205 config SATA_DWC_DEBUG
206 bool "Debugging driver version"
209 This option enables debugging output in the driver.
211 config SATA_DWC_VDEBUG
212 bool "Verbose debug output"
213 depends on SATA_DWC_DEBUG
215 This option enables the taskfile dumping and NCQ debugging.
218 tristate "Marvell SATA support"
220 This option enables support for the Marvell Serial ATA family.
221 Currently supports 88SX[56]0[48][01] PCI(-X) chips,
222 as well as the newer [67]042 PCI-X/PCIe and SOC devices.
227 tristate "NVIDIA SATA support"
230 This option enables support for NVIDIA Serial ATA.
235 tristate "Promise SATA TX2/TX4 support"
238 This option enables support for Promise Serial ATA TX2/TX4.
243 tristate "Silicon Image SATA support"
246 This option enables support for Silicon Image Serial ATA.
251 tristate "SiS 964/965/966/180 SATA support"
255 This option enables support for SiS Serial ATA on
256 SiS 964/965/966/180 and Parallel ATA on SiS 180.
257 The PATA support for SiS 180 requires additionally to
258 enable the PATA_SIS driver in the config.
262 tristate "ServerWorks Frodo / Apple K2 SATA support"
265 This option enables support for Broadcom/Serverworks/Apple K2
271 tristate "ULi Electronics SATA support"
274 This option enables support for ULi Electronics SATA.
279 tristate "VIA SATA support"
282 This option enables support for VIA Serial ATA.
287 tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
290 This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
294 comment "PATA SFF controllers with BMDMA"
297 tristate "ALi PATA support"
300 This option enables support for the ALi ATA interfaces
301 found on the many ALi chipsets.
306 tristate "AMD/NVidia PATA support"
309 This option enables support for the AMD and NVidia PATA
310 interfaces found on the chipsets for Athlon/Athlon64.
315 tristate "ARTOP 6210/6260 PATA support"
318 This option enables support for ARTOP PATA controllers.
323 tristate "ATI PATA support"
326 This option enables support for the ATI ATA interfaces
327 found on the many ATI chipsets.
332 tristate "ARTOP/Acard ATP867X PATA support"
335 This option enables support for ARTOP/Acard ATP867X PATA
341 tristate "Blackfin 54x ATAPI support"
342 depends on BF542 || BF548 || BF549
344 This option enables support for the built-in ATAPI controller on
345 Blackfin 54x family chips.
350 tristate "CMD64x PATA support"
353 This option enables support for the CMD64x series chips
354 except for the CMD640.
359 tristate "CS5510/5520 PATA support"
362 This option enables support for the Cyrix 5510/5520
363 companion chip used with the MediaGX/Geode processor family.
368 tristate "CS5530 PATA support"
371 This option enables support for the Cyrix/NatSemi/AMD CS5530
372 companion chip used with the MediaGX/Geode processor family.
377 tristate "CS5535 PATA support (Experimental)"
378 depends on PCI && X86 && !X86_64 && EXPERIMENTAL
380 This option enables support for the NatSemi/AMD CS5535
381 companion chip used with the Geode processor family.
386 tristate "CS5536 PATA support"
389 This option enables support for the AMD CS5536
390 companion chip used with the Geode LX processor family.
395 tristate "Cypress CY82C693 PATA support (Very Experimental)"
396 depends on PCI && EXPERIMENTAL
398 This option enables support for the Cypress/Contaq CY82C693
399 chipset found in some Alpha systems
404 tristate "EFAR SLC90E66 support"
407 This option enables support for the EFAR SLC90E66
408 IDE controller found on some older machines.
413 tristate "HPT 366/368 PATA support"
416 This option enables support for the HPT 366 and 368
417 PATA controllers via the new ATA layer.
422 tristate "HPT 370/370A/371/372/374/302 PATA support"
425 This option enables support for the majority of the later HPT
426 PATA controllers via the new ATA layer.
431 tristate "HPT 371N/372N/302N PATA support"
434 This option enables support for the N variant HPT PATA
435 controllers via the new ATA layer.
440 tristate "HPT 343/363 PATA support"
443 This option enables support for the HPT 343/363
444 PATA controllers via the new ATA layer
448 config PATA_HPT3X3_DMA
449 bool "HPT 343/363 DMA support"
450 depends on PATA_HPT3X3
452 This option enables DMA support for the HPT343/363
453 controllers. Enable with care as there are still some
454 problems with DMA on this chipset.
457 tristate "Acorn ICS PATA support"
458 depends on ARM && ARCH_ACORN
460 On Acorn systems, say Y here if you wish to use the ICS PATA
461 interface card. This is not required for ICS partition support.
462 If you are unsure, say N to this.
465 tristate "IT8213 PATA support (Experimental)"
466 depends on PCI && EXPERIMENTAL
468 This option enables support for the ITE 821 PATA
469 controllers via the new ATA layer.
474 tristate "IT8211/2 PATA support"
477 This option enables support for the ITE 8211 and 8212
478 PATA controllers via the new ATA layer, including RAID
484 tristate "JMicron PATA support"
487 Enable support for the JMicron IDE controller, via the new
493 tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
496 Most IDE capable PowerMacs have IDE busses driven by a variant
497 of this controller which is part of the Apple chipset used on
498 most PowerMac models. Some models have multiple busses using
499 different chipsets, though generally, MacIO is one of them.
502 tristate "Marvell PATA support via legacy mode"
505 This option enables limited support for the Marvell 88SE61xx ATA
506 controllers. If you wish to use only the SATA ports then select
507 the AHCI driver alone. If you wish to the use the PATA port or
508 both SATA and PATA include this driver.
513 tristate "Freescale MPC52xx SoC internal IDE"
514 depends on PPC_MPC52xx && PPC_BESTCOMM
515 select PPC_BESTCOMM_ATA
517 This option enables support for integrated IDE controller
518 of the Freescale MPC52xx SoC.
523 tristate "NETCELL Revolution RAID support"
526 This option enables support for the Netcell Revolution RAID
532 tristate "Ninja32/Delkin Cardbus ATA support"
535 This option enables support for the Ninja32, Delkin and
536 possibly other brands of Cardbus ATA adapter
541 tristate "Nat Semi NS87415 PATA support"
544 This option enables support for the National Semiconductor
545 NS87415 PCI-IDE controller.
550 tristate "Intel PATA old PIIX support"
553 This option enables support for early PIIX PATA support.
558 tristate "OPTI FireStar PATA support (Very Experimental)"
559 depends on PCI && EXPERIMENTAL
561 This option enables DMA/PIO support for the later OPTi
562 controllers found on some old motherboards and in some
568 tristate "Promise PATA 2027x support"
571 This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
576 tristate "Older Promise PATA controller support"
579 This option enables support for the Promise 20246, 20262, 20263,
580 20265 and 20267 adapters.
585 tristate "RADISYS 82600 PATA support (Experimental)"
586 depends on PCI && EXPERIMENTAL
588 This option enables support for the RADISYS 82600
589 PATA controllers via the new ATA layer
594 tristate "RDC PATA support"
597 This option enables basic support for the later RDC PATA controllers
598 controllers via the new ATA layer. For the RDC 1010, you need to
599 enable the IT821X driver instead.
604 tristate "SC1200 PATA support"
607 This option enables support for the NatSemi/AMD SC1200 SoC
608 companion chip used with the Geode processor family.
613 tristate "Toshiba's Cell Reference Set IDE support"
614 depends on PCI && PPC_CELLEB
616 This option enables support for the built-in IDE controller on
617 Toshiba Cell Reference Board.
622 tristate "Intel SCH PATA support"
625 This option enables support for Intel SCH PATA on the Intel
626 SCH (US15W, US15L, UL11L) series host controllers.
630 config PATA_SERVERWORKS
631 tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
634 This option enables support for the Serverworks OSB4/CSB5/CSB6 and
635 HT1000 PATA controllers, via the new ATA layer.
640 tristate "CMD / Silicon Image 680 PATA support"
643 This option enables support for CMD / Silicon Image 680 PATA.
648 tristate "SiS PATA support"
651 This option enables support for SiS PATA controllers
656 tristate "Toshiba Piccolo support (Experimental)"
657 depends on PCI && EXPERIMENTAL
659 Support for the Toshiba Piccolo controllers. Currently only the
660 primary channel is supported by this driver.
665 tristate "Compaq Triflex PATA support"
668 Enable support for the Compaq 'Triflex' IDE controller as found
669 on many Compaq Pentium-Pro systems, via the new ATA layer.
674 tristate "VIA PATA support"
677 This option enables support for the VIA PATA interfaces
678 found on the many VIA chipsets.
683 tristate "PXA DMA-capable PATA support"
686 This option enables support for harddrive attached to PXA CPU's bus.
688 NOTE: This driver utilizes PXA DMA controller, in case your hardware
689 is not capable of doing MWDMA, use pata_platform instead.
694 tristate "Winbond SL82C105 PATA support"
697 This option enables support for SL82C105 PATA devices found in the
698 Netwinder and some other systems
704 comment "PIO-only SFF controllers"
707 tristate "Atmel AVR32 PATA support (Experimental)"
708 depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL
710 This option enables support for the IDE devices on the
711 Atmel AT32AP platform.
716 tristate "PATA support for AT91SAM9260"
717 depends on ARM && ARCH_AT91
719 This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
723 config PATA_CMD640_PCI
724 tristate "CMD640 PCI PATA support (Experimental)"
725 depends on PCI && EXPERIMENTAL
727 This option enables support for the CMD640 PCI IDE
728 interface chip. Only the primary channel is currently
734 tristate "ISA Plug and Play PATA support"
737 This option enables support for ISA plug & play ATA
738 controllers such as those found on old soundcards.
742 config PATA_IXP4XX_CF
743 tristate "IXP4XX Compact Flash support"
744 depends on ARCH_IXP4XX
746 This option enables support for a Compact Flash connected on
747 the ixp4xx expansion bus. This driver had been written for
748 Loft/Avila boards in mind but can work with others.
753 tristate "Intel PATA MPIIX support"
756 This option enables support for MPIIX PATA support.
761 tristate "Nat Semi NS87410 PATA support"
764 This option enables support for the National Semiconductor
765 NS87410 PCI-IDE controller.
770 tristate "OPTI621/6215 PATA support (Very Experimental)"
771 depends on PCI && EXPERIMENTAL
773 This option enables full PIO support for the early Opti ATA
774 controllers found on some old motherboards.
779 tristate "Palm LifeDrive PATA support"
780 depends on MACH_PALMLD
782 This option enables support for Palm LifeDrive's internal ATA
783 port via the new ATA layer.
788 tristate "PCMCIA PATA support"
791 This option enables support for PCMCIA ATA interfaces, including
792 compact flash card adapters via the new ATA layer.
797 tristate "Generic platform device PATA support"
798 depends on EXPERT || PPC || HAVE_PATA_PLATFORM
800 This option enables support for generic directly connected ATA
801 devices commonly found on embedded systems.
805 config PATA_OF_PLATFORM
806 tristate "OpenFirmware platform device PATA support"
807 depends on PATA_PLATFORM && PPC_OF
809 This option enables support for generic directly connected ATA
810 devices commonly found on embedded systems with OpenFirmware
816 tristate "QDI VLB PATA support"
819 Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
822 tristate "RouterBoard 532 PATA CompactFlash support"
823 depends on MIKROTIK_RB532
825 This option enables support for the RouterBoard 532
826 PATA CompactFlash controller.
831 tristate "PC Tech RZ1000 PATA support"
834 This option enables basic support for the PC Tech RZ1000/1
835 PATA controllers via the new ATA layer
839 config PATA_SAMSUNG_CF
840 tristate "Samsung SoC PATA support"
841 depends on SAMSUNG_DEV_IDE
843 This option enables basic support for Samsung's S3C/S5P board
844 PATA controllers via the new ATA layer
848 config PATA_WINBOND_VLB
849 tristate "Winbond W83759A VLB PATA support (Experimental)"
850 depends on ISA && EXPERIMENTAL
853 Support for the Winbond W83759A controller on Vesa Local Bus
856 comment "Generic fallback / legacy drivers"
859 tristate "ACPI firmware driver for PATA"
860 depends on ATA_ACPI && ATA_BMDMA
862 This option enables an ACPI method driver which drives
863 motherboard PATA controller interfaces through the ACPI
864 firmware in the BIOS. This driver can sometimes handle
865 otherwise unsupported hardware.
868 tristate "Generic ATA support"
869 depends on PCI && ATA_BMDMA
871 This option enables support for generic BIOS configured
872 ATA controllers via the new ATA layer
877 tristate "Legacy ISA PATA support (Experimental)"
878 depends on (ISA || PCI) && EXPERIMENTAL
880 This option enables support for ISA/VLB/PCI bus legacy PATA
881 ports and allows them to be accessed via the new ATA layer.