drivers/acpi/utilities/utcopy.c

   1 /******************************************************************************
   2  *
   3  * Module Name: utcopy - Internal to external object translation utilities
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2005, R. Byron Moore
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #include <acpi/acpi.h>
  45 #include <acpi/amlcode.h>
  46
  47 #define _COMPONENT          ACPI_UTILITIES
  48 ACPI_MODULE_NAME("utcopy")
  49
  50 /* Local prototypes */
  51 static acpi_status
  52 acpi_ut_copy_isimple_to_esimple(union acpi_operand_object *internal_object,
  53                                 union acpi_object *external_object,
  54                                 u8 * data_space, acpi_size * buffer_space_used);
  55
  56 static acpi_status
  57 acpi_ut_copy_ielement_to_ielement(u8 object_type,
  58                                   union acpi_operand_object *source_object,
  59                                   union acpi_generic_state *state,
  60                                   void *context);
  61
  62 static acpi_status
  63 acpi_ut_copy_ipackage_to_epackage(union acpi_operand_object *internal_object,
  64                                   u8 * buffer, acpi_size * space_used);
  65
  66 static acpi_status
  67 acpi_ut_copy_esimple_to_isimple(union acpi_object *user_obj,
  68                                 union acpi_operand_object **return_obj);
  69
  70 static acpi_status
  71 acpi_ut_copy_simple_object(union acpi_operand_object *source_desc,
  72                            union acpi_operand_object *dest_desc);
  73
  74 static acpi_status
  75 acpi_ut_copy_ielement_to_eelement(u8 object_type,
  76                                   union acpi_operand_object *source_object,
  77                                   union acpi_generic_state *state,
  78                                   void *context);
  79
  80 static acpi_status
  81 acpi_ut_copy_ipackage_to_ipackage(union acpi_operand_object *source_obj,
  82                                   union acpi_operand_object *dest_obj,
  83                                   struct acpi_walk_state *walk_state);
  84
  85 /*******************************************************************************
  86  *
  87  * FUNCTION:    acpi_ut_copy_isimple_to_esimple
  88  *
  89  * PARAMETERS:  internal_object     - Source object to be copied
  90  *              external_object     - Where to return the copied object
  91  *              data_space          - Where object data is returned (such as
  92  *                                    buffer and string data)
  93  *              buffer_space_used   - Length of data_space that was used
  94  *
  95  * RETURN:      Status
  96  *
  97  * DESCRIPTION: This function is called to copy a simple internal object to
  98  *              an external object.
  99  *
 100  *              The data_space buffer is assumed to have sufficient space for
 101  *              the object.
 102  *
 103  ******************************************************************************/
 104
 105 static acpi_status
 106 acpi_ut_copy_isimple_to_esimple(union acpi_operand_object *internal_object,
 107                                 union acpi_object *external_object,
 108                                 u8 * data_space, acpi_size * buffer_space_used)
 109 {
 110         acpi_status status = AE_OK;
 111
 112         ACPI_FUNCTION_TRACE("ut_copy_isimple_to_esimple");
 113
 114         *buffer_space_used = 0;
 115
 116         /*
 117          * Check for NULL object case (could be an uninitialized
 118          * package element)
 119          */
 120         if (!internal_object) {
 121                 return_ACPI_STATUS(AE_OK);
 122         }
 123
 124         /* Always clear the external object */
 125
 126         ACPI_MEMSET(external_object, 0, sizeof(union acpi_object));
 127
 128         /*
 129          * In general, the external object will be the same type as
 130          * the internal object
 131          */
 132         external_object->type = ACPI_GET_OBJECT_TYPE(internal_object);
 133
 134         /* However, only a limited number of external types are supported */
 135
 136         switch (ACPI_GET_OBJECT_TYPE(internal_object)) {
 137         case ACPI_TYPE_STRING:
 138
 139                 external_object->string.pointer = (char *)data_space;
 140                 external_object->string.length = internal_object->string.length;
 141                 *buffer_space_used = ACPI_ROUND_UP_TO_NATIVE_WORD((acpi_size)
 142                                                                   internal_object->
 143                                                                   string.
 144                                                                   length + 1);
 145
 146                 ACPI_MEMCPY((void *)data_space,
 147                             (void *)internal_object->string.pointer,
 148                             (acpi_size) internal_object->string.length + 1);
 149                 break;
 150
 151         case ACPI_TYPE_BUFFER:
 152
 153                 external_object->buffer.pointer = data_space;
 154                 external_object->buffer.length = internal_object->buffer.length;
 155                 *buffer_space_used =
 156                     ACPI_ROUND_UP_TO_NATIVE_WORD(internal_object->string.
 157                                                  length);
 158
 159                 ACPI_MEMCPY((void *)data_space,
 160                             (void *)internal_object->buffer.pointer,
 161                             internal_object->buffer.length);
 162                 break;
 163
 164         case ACPI_TYPE_INTEGER:
 165
 166                 external_object->integer.value = internal_object->integer.value;
 167                 break;
 168
 169         case ACPI_TYPE_LOCAL_REFERENCE:
 170
 171                 /*
 172                  * This is an object reference.  Attempt to dereference it.
 173                  */
 174                 switch (internal_object->reference.opcode) {
 175                 case AML_INT_NAMEPATH_OP:
 176
 177                         /* For namepath, return the object handle ("reference") */
 178
 179                 default:
 180                         /*
 181                          * Use the object type of "Any" to indicate a reference
 182                          * to object containing a handle to an ACPI named object.
 183                          */
 184                         external_object->type = ACPI_TYPE_ANY;
 185                         external_object->reference.handle =
 186                             internal_object->reference.node;
 187                         break;
 188                 }
 189                 break;
 190
 191         case ACPI_TYPE_PROCESSOR:
 192
 193                 external_object->processor.proc_id =
 194                     internal_object->processor.proc_id;
 195                 external_object->processor.pblk_address =
 196                     internal_object->processor.address;
 197                 external_object->processor.pblk_length =
 198                     internal_object->processor.length;
 199                 break;
 200
 201         case ACPI_TYPE_POWER:
 202
 203                 external_object->power_resource.system_level =
 204                     internal_object->power_resource.system_level;
 205
 206                 external_object->power_resource.resource_order =
 207                     internal_object->power_resource.resource_order;
 208                 break;
 209
 210         default:
 211                 /*
 212                  * There is no corresponding external object type
 213                  */
 214                 return_ACPI_STATUS(AE_SUPPORT);
 215         }
 216
 217         return_ACPI_STATUS(status);
 218 }
 219
 220 /*******************************************************************************
 221  *
 222  * FUNCTION:    acpi_ut_copy_ielement_to_eelement
 223  *
 224  * PARAMETERS:  acpi_pkg_callback
 225  *
 226  * RETURN:      Status
 227  *
 228  * DESCRIPTION: Copy one package element to another package element
 229  *
 230  ******************************************************************************/
 231
 232 static acpi_status
 233 acpi_ut_copy_ielement_to_eelement(u8 object_type,
 234                                   union acpi_operand_object *source_object,
 235                                   union acpi_generic_state *state,
 236                                   void *context)
 237 {
 238         acpi_status status = AE_OK;
 239         struct acpi_pkg_info *info = (struct acpi_pkg_info *)context;
 240         acpi_size object_space;
 241         u32 this_index;
 242         union acpi_object *target_object;
 243
 244         ACPI_FUNCTION_ENTRY();
 245
 246         this_index = state->pkg.index;
 247         target_object = (union acpi_object *)
 248             &((union acpi_object *)(state->pkg.dest_object))->package.
 249             elements[this_index];
 250
 251         switch (object_type) {
 252         case ACPI_COPY_TYPE_SIMPLE:
 253
 254                 /*
 255                  * This is a simple or null object
 256                  */
 257                 status = acpi_ut_copy_isimple_to_esimple(source_object,
 258                                                          target_object,
 259                                                          info->free_space,
 260                                                          &object_space);
 261                 if (ACPI_FAILURE(status)) {
 262                         return (status);
 263                 }
 264                 break;
 265
 266         case ACPI_COPY_TYPE_PACKAGE:
 267
 268                 /*
 269                  * Build the package object
 270                  */
 271                 target_object->type = ACPI_TYPE_PACKAGE;
 272                 target_object->package.count = source_object->package.count;
 273                 target_object->package.elements =
 274                     ACPI_CAST_PTR(union acpi_object, info->free_space);
 275
 276                 /*
 277                  * Pass the new package object back to the package walk routine
 278                  */
 279                 state->pkg.this_target_obj = target_object;
 280
 281                 /*
 282                  * Save space for the array of objects (Package elements)
 283                  * update the buffer length counter
 284                  */
 285                 object_space = ACPI_ROUND_UP_TO_NATIVE_WORD((acpi_size)
 286                                                             target_object->
 287                                                             package.count *
 288                                                             sizeof(union
 289                                                                    acpi_object));
 290                 break;
 291
 292         default:
 293                 return (AE_BAD_PARAMETER);
 294         }
 295
 296         info->free_space += object_space;
 297         info->length += object_space;
 298         return (status);
 299 }
 300
 301 /*******************************************************************************
 302  *
 303  * FUNCTION:    acpi_ut_copy_ipackage_to_epackage
 304  *
 305  * PARAMETERS:  internal_object     - Pointer to the object we are returning
 306  *              Buffer              - Where the object is returned
 307  *              space_used          - Where the object length is returned
 308  *
 309  * RETURN:      Status
 310  *
 311  * DESCRIPTION: This function is called to place a package object in a user
 312  *              buffer.  A package object by definition contains other objects.
 313  *
 314  *              The buffer is assumed to have sufficient space for the object.
 315  *              The caller must have verified the buffer length needed using the
 316  *              acpi_ut_get_object_size function before calling this function.
 317  *
 318  ******************************************************************************/
 319
 320 static acpi_status
 321 acpi_ut_copy_ipackage_to_epackage(union acpi_operand_object *internal_object,
 322                                   u8 * buffer, acpi_size * space_used)
 323 {
 324         union acpi_object *external_object;
 325         acpi_status status;
 326         struct acpi_pkg_info info;
 327
 328         ACPI_FUNCTION_TRACE("ut_copy_ipackage_to_epackage");
 329
 330         /*
 331          * First package at head of the buffer
 332          */
 333         external_object = ACPI_CAST_PTR(union acpi_object, buffer);
 334
 335         /*
 336          * Free space begins right after the first package
 337          */
 338         info.length = ACPI_ROUND_UP_TO_NATIVE_WORD(sizeof(union acpi_object));
 339         info.free_space =
 340             buffer + ACPI_ROUND_UP_TO_NATIVE_WORD(sizeof(union acpi_object));
 341         info.object_space = 0;
 342         info.num_packages = 1;
 343
 344         external_object->type = ACPI_GET_OBJECT_TYPE(internal_object);
 345         external_object->package.count = internal_object->package.count;
 346         external_object->package.elements = ACPI_CAST_PTR(union acpi_object,
 347                                                           info.free_space);
 348
 349         /*
 350          * Leave room for an array of ACPI_OBJECTS in the buffer
 351          * and move the free space past it
 352          */
 353         info.length += (acpi_size) external_object->package.count *
 354             ACPI_ROUND_UP_TO_NATIVE_WORD(sizeof(union acpi_object));
 355         info.free_space += external_object->package.count *
 356             ACPI_ROUND_UP_TO_NATIVE_WORD(sizeof(union acpi_object));
 357
 358         status = acpi_ut_walk_package_tree(internal_object, external_object,
 359                                            acpi_ut_copy_ielement_to_eelement,
 360                                            &info);
 361
 362         *space_used = info.length;
 363         return_ACPI_STATUS(status);
 364 }
 365
 366 /*******************************************************************************
 367  *
 368  * FUNCTION:    acpi_ut_copy_iobject_to_eobject
 369  *
 370  * PARAMETERS:  internal_object     - The internal object to be converted
 371  *              buffer_ptr          - Where the object is returned
 372  *
 373  * RETURN:      Status
 374  *
 375  * DESCRIPTION: This function is called to build an API object to be returned to
 376  *              the caller.
 377  *
 378  ******************************************************************************/
 379
 380 acpi_status
 381 acpi_ut_copy_iobject_to_eobject(union acpi_operand_object *internal_object,
 382                                 struct acpi_buffer *ret_buffer)
 383 {
 384         acpi_status status;
 385
 386         ACPI_FUNCTION_TRACE("ut_copy_iobject_to_eobject");
 387
 388         if (ACPI_GET_OBJECT_TYPE(internal_object) == ACPI_TYPE_PACKAGE) {
 389                 /*
 390                  * Package object:  Copy all subobjects (including
 391                  * nested packages)
 392                  */
 393                 status = acpi_ut_copy_ipackage_to_epackage(internal_object,
 394                                                            ret_buffer->pointer,
 395                                                            &ret_buffer->length);
 396         } else {
 397                 /*
 398                  * Build a simple object (no nested objects)
 399                  */
 400                 status = acpi_ut_copy_isimple_to_esimple(internal_object,
 401                                                          (union acpi_object *)
 402                                                          ret_buffer->pointer,
 403                                                          ((u8 *) ret_buffer->
 404                                                           pointer +
 405                                                           ACPI_ROUND_UP_TO_NATIVE_WORD
 406                                                           (sizeof
 407                                                            (union
 408                                                             acpi_object))),
 409                                                          &ret_buffer->length);
 410                 /*
 411                  * build simple does not include the object size in the length
 412                  * so we add it in here
 413                  */
 414                 ret_buffer->length += sizeof(union acpi_object);
 415         }
 416
 417         return_ACPI_STATUS(status);
 418 }
 419
 420 /*******************************************************************************
 421  *
 422  * FUNCTION:    acpi_ut_copy_esimple_to_isimple
 423  *
 424  * PARAMETERS:  external_object     - The external object to be converted
 425  *              ret_internal_object - Where the internal object is returned
 426  *
 427  * RETURN:      Status
 428  *
 429  * DESCRIPTION: This function copies an external object to an internal one.
 430  *              NOTE: Pointers can be copied, we don't need to copy data.
 431  *              (The pointers have to be valid in our address space no matter
 432  *              what we do with them!)
 433  *
 434  ******************************************************************************/
 435
 436 static acpi_status
 437 acpi_ut_copy_esimple_to_isimple(union acpi_object *external_object,
 438                                 union acpi_operand_object **ret_internal_object)
 439 {
 440         union acpi_operand_object *internal_object;
 441
 442         ACPI_FUNCTION_TRACE("ut_copy_esimple_to_isimple");
 443
 444         /*
 445          * Simple types supported are: String, Buffer, Integer
 446          */
 447         switch (external_object->type) {
 448         case ACPI_TYPE_STRING:
 449         case ACPI_TYPE_BUFFER:
 450         case ACPI_TYPE_INTEGER:
 451
 452                 internal_object = acpi_ut_create_internal_object((u8)
 453                                                                  external_object->
 454                                                                  type);
 455                 if (!internal_object) {
 456                         return_ACPI_STATUS(AE_NO_MEMORY);
 457                 }
 458                 break;
 459
 460         default:
 461                 /* All other types are not supported */
 462
 463                 return_ACPI_STATUS(AE_SUPPORT);
 464         }
 465
 466         /* Must COPY string and buffer contents */
 467
 468         switch (external_object->type) {
 469         case ACPI_TYPE_STRING:
 470
 471                 internal_object->string.pointer =
 472                     ACPI_MEM_CALLOCATE((acpi_size) external_object->string.
 473                                        length + 1);
 474                 if (!internal_object->string.pointer) {
 475                         goto error_exit;
 476                 }
 477
 478                 ACPI_MEMCPY(internal_object->string.pointer,
 479                             external_object->string.pointer,
 480                             external_object->string.length);
 481
 482                 internal_object->string.length = external_object->string.length;
 483                 break;
 484
 485         case ACPI_TYPE_BUFFER:
 486
 487                 internal_object->buffer.pointer =
 488                     ACPI_MEM_CALLOCATE(external_object->buffer.length);
 489                 if (!internal_object->buffer.pointer) {
 490                         goto error_exit;
 491                 }
 492
 493                 ACPI_MEMCPY(internal_object->buffer.pointer,
 494                             external_object->buffer.pointer,
 495                             external_object->buffer.length);
 496
 497                 internal_object->buffer.length = external_object->buffer.length;
 498                 break;
 499
 500         case ACPI_TYPE_INTEGER:
 501
 502                 internal_object->integer.value = external_object->integer.value;
 503                 break;
 504
 505         default:
 506                 /* Other types can't get here */
 507                 break;
 508         }
 509
 510         *ret_internal_object = internal_object;
 511         return_ACPI_STATUS(AE_OK);
 512
 513       error_exit:
 514         acpi_ut_remove_reference(internal_object);
 515         return_ACPI_STATUS(AE_NO_MEMORY);
 516 }
 517
 518 #ifdef ACPI_FUTURE_IMPLEMENTATION
 519 /* Code to convert packages that are parameters to control methods */
 520
 521 /*******************************************************************************
 522  *
 523  * FUNCTION:    acpi_ut_copy_epackage_to_ipackage
 524  *
 525  * PARAMETERS:  *internal_object   - Pointer to the object we are returning
 526  *              *Buffer            - Where the object is returned
 527  *              *space_used        - Where the length of the object is returned
 528  *
 529  * RETURN:      Status
 530  *
 531  * DESCRIPTION: This function is called to place a package object in a user
 532  *              buffer.  A package object by definition contains other objects.
 533  *
 534  *              The buffer is assumed to have sufficient space for the object.
 535  *              The caller must have verified the buffer length needed using the
 536  *              acpi_ut_get_object_size function before calling this function.
 537  *
 538  ******************************************************************************/
 539
 540 static acpi_status
 541 acpi_ut_copy_epackage_to_ipackage(union acpi_operand_object *internal_object,
 542                                   u8 * buffer, u32 * space_used)
 543 {
 544         u8 *free_space;
 545         union acpi_object *external_object;
 546         u32 length = 0;
 547         u32 this_index;
 548         u32 object_space = 0;
 549         union acpi_operand_object *this_internal_obj;
 550         union acpi_object *this_external_obj;
 551
 552         ACPI_FUNCTION_TRACE("ut_copy_epackage_to_ipackage");
 553
 554         /*
 555          * First package at head of the buffer
 556          */
 557         external_object = (union acpi_object *)buffer;
 558
 559         /*
 560          * Free space begins right after the first package
 561          */
 562         free_space = buffer + sizeof(union acpi_object);
 563
 564         external_object->type = ACPI_GET_OBJECT_TYPE(internal_object);
 565         external_object->package.count = internal_object->package.count;
 566         external_object->package.elements = (union acpi_object *)free_space;
 567
 568         /*
 569          * Build an array of ACPI_OBJECTS in the buffer
 570          * and move the free space past it
 571          */
 572         free_space +=
 573             external_object->package.count * sizeof(union acpi_object);
 574
 575         /* Call walk_package */
 576
 577 }
 578
 579 #endif                          /* Future implementation */
 580
 581 /*******************************************************************************
 582  *
 583  * FUNCTION:    acpi_ut_copy_eobject_to_iobject
 584  *
 585  * PARAMETERS:  *internal_object   - The external object to be converted
 586  *              *buffer_ptr     - Where the internal object is returned
 587  *
 588  * RETURN:      Status          - the status of the call
 589  *
 590  * DESCRIPTION: Converts an external object to an internal object.
 591  *
 592  ******************************************************************************/
 593
 594 acpi_status
 595 acpi_ut_copy_eobject_to_iobject(union acpi_object *external_object,
 596                                 union acpi_operand_object **internal_object)
 597 {
 598         acpi_status status;
 599
 600         ACPI_FUNCTION_TRACE("ut_copy_eobject_to_iobject");
 601
 602         if (external_object->type == ACPI_TYPE_PACKAGE) {
 603                 /*
 604                  * Packages as external input to control methods are not supported,
 605                  */
 606                 ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
 607                                   "Packages as parameters not implemented!\n"));
 608
 609                 return_ACPI_STATUS(AE_NOT_IMPLEMENTED);
 610         }
 611
 612         else {
 613                 /*
 614                  * Build a simple object (no nested objects)
 615                  */
 616                 status =
 617                     acpi_ut_copy_esimple_to_isimple(external_object,
 618                                                     internal_object);
 619         }
 620
 621         return_ACPI_STATUS(status);
 622 }
 623
 624 /*******************************************************************************
 625  *
 626  * FUNCTION:    acpi_ut_copy_simple_object
 627  *
 628  * PARAMETERS:  source_desc         - The internal object to be copied
 629  *              dest_desc           - New target object
 630  *
 631  * RETURN:      Status
 632  *
 633  * DESCRIPTION: Simple copy of one internal object to another.  Reference count
 634  *              of the destination object is preserved.
 635  *
 636  ******************************************************************************/
 637
 638 static acpi_status
 639 acpi_ut_copy_simple_object(union acpi_operand_object *source_desc,
 640                            union acpi_operand_object *dest_desc)
 641 {
 642         u16 reference_count;
 643         union acpi_operand_object *next_object;
 644
 645         /* Save fields from destination that we don't want to overwrite */
 646
 647         reference_count = dest_desc->common.reference_count;
 648         next_object = dest_desc->common.next_object;
 649
 650         /* Copy the entire source object over the destination object */
 651
 652         ACPI_MEMCPY((char *)dest_desc, (char *)source_desc,
 653                     sizeof(union acpi_operand_object));
 654
 655         /* Restore the saved fields */
 656
 657         dest_desc->common.reference_count = reference_count;
 658         dest_desc->common.next_object = next_object;
 659
 660         /* New object is not static, regardless of source */
 661
 662         dest_desc->common.flags &= ~AOPOBJ_STATIC_POINTER;
 663
 664         /* Handle the objects with extra data */
 665
 666         switch (ACPI_GET_OBJECT_TYPE(dest_desc)) {
 667         case ACPI_TYPE_BUFFER:
 668                 /*
 669                  * Allocate and copy the actual buffer if and only if:
 670                  * 1) There is a valid buffer pointer
 671                  * 2) The buffer has a length > 0
 672                  */
 673                 if ((source_desc->buffer.pointer) &&
 674                     (source_desc->buffer.length)) {
 675                         dest_desc->buffer.pointer =
 676                             ACPI_MEM_ALLOCATE(source_desc->buffer.length);
 677                         if (!dest_desc->buffer.pointer) {
 678                                 return (AE_NO_MEMORY);
 679                         }
 680
 681                         /* Copy the actual buffer data */
 682
 683                         ACPI_MEMCPY(dest_desc->buffer.pointer,
 684                                     source_desc->buffer.pointer,
 685                                     source_desc->buffer.length);
 686                 }
 687                 break;
 688
 689         case ACPI_TYPE_STRING:
 690                 /*
 691                  * Allocate and copy the actual string if and only if:
 692                  * 1) There is a valid string pointer
 693                  * (Pointer to a NULL string is allowed)
 694                  */
 695                 if (source_desc->string.pointer) {
 696                         dest_desc->string.pointer =
 697                             ACPI_MEM_ALLOCATE((acpi_size) source_desc->string.
 698                                               length + 1);
 699                         if (!dest_desc->string.pointer) {
 700                                 return (AE_NO_MEMORY);
 701                         }
 702
 703                         /* Copy the actual string data */
 704
 705                         ACPI_MEMCPY(dest_desc->string.pointer,
 706                                     source_desc->string.pointer,
 707                                     (acpi_size) source_desc->string.length + 1);
 708                 }
 709                 break;
 710
 711         case ACPI_TYPE_LOCAL_REFERENCE:
 712                 /*
 713                  * We copied the reference object, so we now must add a reference
 714                  * to the object pointed to by the reference
 715                  */
 716                 acpi_ut_add_reference(source_desc->reference.object);
 717                 break;
 718
 719         default:
 720                 /* Nothing to do for other simple objects */
 721                 break;
 722         }
 723
 724         return (AE_OK);
 725 }
 726
 727 /*******************************************************************************
 728  *
 729  * FUNCTION:    acpi_ut_copy_ielement_to_ielement
 730  *
 731  * PARAMETERS:  acpi_pkg_callback
 732  *
 733  * RETURN:      Status
 734  *
 735  * DESCRIPTION: Copy one package element to another package element
 736  *
 737  ******************************************************************************/
 738
 739 static acpi_status
 740 acpi_ut_copy_ielement_to_ielement(u8 object_type,
 741                                   union acpi_operand_object *source_object,
 742                                   union acpi_generic_state *state,
 743                                   void *context)
 744 {
 745         acpi_status status = AE_OK;
 746         u32 this_index;
 747         union acpi_operand_object **this_target_ptr;
 748         union acpi_operand_object *target_object;
 749
 750         ACPI_FUNCTION_ENTRY();
 751
 752         this_index = state->pkg.index;
 753         this_target_ptr = (union acpi_operand_object **)
 754             &state->pkg.dest_object->package.elements[this_index];
 755
 756         switch (object_type) {
 757         case ACPI_COPY_TYPE_SIMPLE:
 758
 759                 /* A null source object indicates a (legal) null package element */
 760
 761                 if (source_object) {
 762                         /*
 763                          * This is a simple object, just copy it
 764                          */
 765                         target_object =
 766                             acpi_ut_create_internal_object(ACPI_GET_OBJECT_TYPE
 767                                                            (source_object));
 768                         if (!target_object) {
 769                                 return (AE_NO_MEMORY);
 770                         }
 771
 772                         status =
 773                             acpi_ut_copy_simple_object(source_object,
 774                                                        target_object);
 775                         if (ACPI_FAILURE(status)) {
 776                                 goto error_exit;
 777                         }
 778
 779                         *this_target_ptr = target_object;
 780                 } else {
 781                         /* Pass through a null element */
 782
 783                         *this_target_ptr = NULL;
 784                 }
 785                 break;
 786
 787         case ACPI_COPY_TYPE_PACKAGE:
 788
 789                 /*
 790                  * This object is a package - go down another nesting level
 791                  * Create and build the package object
 792                  */
 793                 target_object =
 794                     acpi_ut_create_internal_object(ACPI_TYPE_PACKAGE);
 795                 if (!target_object) {
 796                         return (AE_NO_MEMORY);
 797                 }
 798
 799                 target_object->package.count = source_object->package.count;
 800                 target_object->common.flags = source_object->common.flags;
 801
 802                 /*
 803                  * Create the object array
 804                  */
 805                 target_object->package.elements =
 806                     ACPI_MEM_CALLOCATE(((acpi_size) source_object->package.
 807                                         count + 1) * sizeof(void *));
 808                 if (!target_object->package.elements) {
 809                         status = AE_NO_MEMORY;
 810                         goto error_exit;
 811                 }
 812
 813                 /*
 814                  * Pass the new package object back to the package walk routine
 815                  */
 816                 state->pkg.this_target_obj = target_object;
 817
 818                 /*
 819                  * Store the object pointer in the parent package object
 820                  */
 821                 *this_target_ptr = target_object;
 822                 break;
 823
 824         default:
 825                 return (AE_BAD_PARAMETER);
 826         }
 827
 828         return (status);
 829
 830       error_exit:
 831         acpi_ut_remove_reference(target_object);
 832         return (status);
 833 }
 834
 835 /*******************************************************************************
 836  *
 837  * FUNCTION:    acpi_ut_copy_ipackage_to_ipackage
 838  *
 839  * PARAMETERS:  *source_obj     - Pointer to the source package object
 840  *              *dest_obj       - Where the internal object is returned
 841  *
 842  * RETURN:      Status          - the status of the call
 843  *
 844  * DESCRIPTION: This function is called to copy an internal package object
 845  *              into another internal package object.
 846  *
 847  ******************************************************************************/
 848
 849 static acpi_status
 850 acpi_ut_copy_ipackage_to_ipackage(union acpi_operand_object *source_obj,
 851                                   union acpi_operand_object *dest_obj,
 852                                   struct acpi_walk_state *walk_state)
 853 {
 854         acpi_status status = AE_OK;
 855
 856         ACPI_FUNCTION_TRACE("ut_copy_ipackage_to_ipackage");
 857
 858         dest_obj->common.type = ACPI_GET_OBJECT_TYPE(source_obj);
 859         dest_obj->common.flags = source_obj->common.flags;
 860         dest_obj->package.count = source_obj->package.count;
 861
 862         /*
 863          * Create the object array and walk the source package tree
 864          */
 865         dest_obj->package.elements = ACPI_MEM_CALLOCATE(((acpi_size)
 866                                                          source_obj->package.
 867                                                          count +
 868                                                          1) * sizeof(void *));
 869         if (!dest_obj->package.elements) {
 870                 ACPI_REPORT_ERROR(("aml_build_copy_internal_package_object: Package allocation failure\n"));
 871                 return_ACPI_STATUS(AE_NO_MEMORY);
 872         }
 873
 874         /*
 875          * Copy the package element-by-element by walking the package "tree".
 876          * This handles nested packages of arbitrary depth.
 877          */
 878         status = acpi_ut_walk_package_tree(source_obj, dest_obj,
 879                                            acpi_ut_copy_ielement_to_ielement,
 880                                            walk_state);
 881         if (ACPI_FAILURE(status)) {
 882                 /* On failure, delete the destination package object */
 883
 884                 acpi_ut_remove_reference(dest_obj);
 885         }
 886
 887         return_ACPI_STATUS(status);
 888 }
 889
 890 /*******************************************************************************
 891  *
 892  * FUNCTION:    acpi_ut_copy_iobject_to_iobject
 893  *
 894  * PARAMETERS:  walk_state          - Current walk state
 895  *              source_desc         - The internal object to be copied
 896  *              dest_desc           - Where the copied object is returned
 897  *
 898  * RETURN:      Status
 899  *
 900  * DESCRIPTION: Copy an internal object to a new internal object
 901  *
 902  ******************************************************************************/
 903
 904 acpi_status
 905 acpi_ut_copy_iobject_to_iobject(union acpi_operand_object *source_desc,
 906                                 union acpi_operand_object **dest_desc,
 907                                 struct acpi_walk_state *walk_state)
 908 {
 909         acpi_status status = AE_OK;
 910
 911         ACPI_FUNCTION_TRACE("ut_copy_iobject_to_iobject");
 912
 913         /* Create the top level object */
 914
 915         *dest_desc =
 916             acpi_ut_create_internal_object(ACPI_GET_OBJECT_TYPE(source_desc));
 917         if (!*dest_desc) {
 918                 return_ACPI_STATUS(AE_NO_MEMORY);
 919         }
 920
 921         /* Copy the object and possible subobjects */
 922
 923         if (ACPI_GET_OBJECT_TYPE(source_desc) == ACPI_TYPE_PACKAGE) {
 924                 status =
 925                     acpi_ut_copy_ipackage_to_ipackage(source_desc, *dest_desc,
 926                                                       walk_state);
 927         } else {
 928                 status = acpi_ut_copy_simple_object(source_desc, *dest_desc);
 929         }
 930
 931         return_ACPI_STATUS(status);
 932 }