1 menu "Command line interface"
4 bool "Support U-Boot commands"
7 Enable U-Boot's command-line functions. This provides a means
8 to enter commands into U-Boot for a wide variety of purposes. It
9 also allows scripts (containing commands) to be executed.
10 Various commands and command categorys can be indivdually enabled.
11 Depending on the number of commands enabled, this can add
12 substantially to the size of U-Boot.
18 This option enables the "hush" shell (from Busybox) as command line
19 interpreter, thus enabling powerful command line syntax like
20 if...then...else...fi conditionals or `&&' and '||'
21 constructs ("shell scripts").
23 If disabled, you get the old, much simpler behaviour with a somewhat
24 smaller memory footprint.
26 config CMDLINE_EDITING
27 bool "Enable command line editing"
31 Enable editing and History functions for interactive command line
35 bool "Enable auto complete using TAB"
39 Enable auto completion of commands using TAB.
42 bool "Enable long help messages"
46 Defined when you want long help messages included
47 Do not set this option when short of memory.
53 This string is displayed in the command line to the left of the
56 menu "Autoboot options"
62 This enables the autoboot. See doc/README.autoboot for detail.
65 bool "Stop autobooting via specific input key / string"
68 This option enables stopping (aborting) of the automatic
69 boot feature only by issuing a specific input key or
70 string. If not enabled, any input key will abort the
71 U-Boot automatic booting process and bring the device
72 to the U-Boot prompt for user input.
74 config AUTOBOOT_PROMPT
75 string "Autoboot stop prompt"
76 depends on AUTOBOOT_KEYED
77 default "Autoboot in %d seconds\\n"
79 This string is displayed before the boot delay selected by
80 CONFIG_BOOTDELAY starts. If it is not defined there is no
81 output indicating that autoboot is in progress.
83 Note that this define is used as the (only) argument to a
84 printf() call, so it may contain '%' format specifications,
85 provided that it also includes, sepearated by commas exactly
86 like in a printf statement, the required arguments. It is
87 the responsibility of the user to select only such arguments
88 that are valid in the given context.
90 config AUTOBOOT_ENCRYPTION
91 bool "Enable encryption in autoboot stopping"
92 depends on AUTOBOOT_KEYED
95 config AUTOBOOT_DELAY_STR
96 string "Delay autobooting via specific input key / string"
97 depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION
99 This option delays the automatic boot feature by issuing
100 a specific input key or string. If CONFIG_AUTOBOOT_DELAY_STR
101 or the environment variable "bootdelaykey" is specified
102 and this string is received from console input before
103 autoboot starts booting, U-Boot gives a command prompt. The
104 U-Boot prompt will time out if CONFIG_BOOT_RETRY_TIME is
105 used, otherwise it never times out.
107 config AUTOBOOT_STOP_STR
108 string "Stop autobooting via specific input key / string"
109 depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION
111 This option enables stopping (aborting) of the automatic
112 boot feature only by issuing a specific input key or
113 string. If CONFIG_AUTOBOOT_STOP_STR or the environment
114 variable "bootstopkey" is specified and this string is
115 received from console input before autoboot starts booting,
116 U-Boot gives a command prompt. The U-Boot prompt never
117 times out, even if CONFIG_BOOT_RETRY_TIME is used.
119 config AUTOBOOT_KEYED_CTRLC
120 bool "Enable Ctrl-C autoboot interruption"
121 depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION
124 This option allows for the boot sequence to be interrupted
125 by ctrl-c, in addition to the "bootdelaykey" and "bootstopkey".
126 Setting this variable provides an escape sequence from the
127 limited "password" strings.
129 config AUTOBOOT_STOP_STR_SHA256
130 string "Stop autobooting via SHA256 encrypted password"
131 depends on AUTOBOOT_KEYED && AUTOBOOT_ENCRYPTION
133 This option adds the feature to only stop the autobooting,
134 and therefore boot into the U-Boot prompt, when the input
135 string / password matches a values that is encypted via
136 a SHA256 hash and saved in the environment.
158 Print ".config" contents.
160 If this option is enabled, the ".config" file contents are embedded
161 in the U-Boot image and can be printed on the console by the "config"
162 command. This provides information of which options are enabled on
169 Print console devices and information.
174 Print information about available CPUs. This normally shows the
175 number of CPUs, type (e.g. manufacturer, architecture, product or
176 internal name) and clock frequency. Other information may be
177 available depending on the CPU driver.
183 Print GPL license text
199 Run the command stored in the environment "bootcmd", i.e.
200 "bootd" does the same thing as "run bootcmd".
206 Boot an application image from the memory.
211 Boot the Linux zImage
218 Boot an AArch64 Linux Kernel image from memory.
222 depends on EFI_LOADER
225 Boot an EFI image from memory.
227 config CMD_BOOTEFI_HELLO_COMPILE
228 bool "Compile a standard EFI hello world binary for testing"
229 depends on CMD_BOOTEFI && (ARM || X86 || RISCV)
232 This compiles a standard EFI hello world application with U-Boot so
233 that it can be used with the test/py testing framework. This is useful
234 for testing that EFI is working at a basic level, and for bringing
235 up EFI support on a new architecture.
237 No additional space will be required in the resulting U-Boot binary
238 when this option is enabled.
240 config CMD_BOOTEFI_HELLO
241 bool "Allow booting a standard EFI hello world for testing"
242 depends on CMD_BOOTEFI_HELLO_COMPILE
244 This adds a standard EFI hello world application to U-Boot so that
245 it can be used with the 'bootefi hello' command. This is useful
246 for testing that EFI is working at a basic level, and for bringing
247 up EFI support on a new architecture.
249 source lib/efi_selftest/Kconfig
255 Add an ANSI terminal boot menu command.
260 Android DTB/DTBO image manipulation commands. Read dtb/dtbo files from
261 image into RAM, dump image structure information, etc. Those dtb/dtbo
262 files should be merged in one dtb further, which needs to be passed to
263 the kernel, as part of a boot process.
266 bool "bootelf, bootvx"
269 Boot an ELF/vxWorks image from the memory.
272 bool "Flattened Device Tree utility commands"
276 Do FDT related setup before booting into the Operating System.
282 Start an application at a given address.
288 Run the command in the given environment variable.
294 Print header information for application image.
299 List all images found in flash
305 Extract a part of a multi-image.
308 bool "spl export - Export boot information for Falcon boot"
311 Falcon mode allows booting directly from SPL into an Operating
312 System such as Linux, thus skipping U-Boot proper. See
313 doc/README.falcon for full information about how to use this
316 config CMD_SPL_NAND_OFS
317 hex "Offset of OS command line args for Falcon-mode NAND boot"
321 This provides the offset of the command line arguments for Linux
322 when booting from NAND in Falcon mode. See doc/README.falcon
323 for full information about how to use this option (and also see
324 board/gateworks/gw_ventana/README for an example).
326 config CMD_SPL_WRITE_SIZE
327 hex "Size of argument area"
331 This provides the size of the command-line argument area in NAND
332 flash used by Falcon-mode boot. See the documentation until CMD_SPL
336 bool "fitImage update command"
338 Implements the 'fitupd' command, which allows to automatically
339 store software updates present on a TFTP server in NOR Flash
341 config CMD_THOR_DOWNLOAD
342 bool "thor - TIZEN 'thor' download"
344 Implements the 'thor' download protocol. This is a way of
345 downloading a software update over USB from an attached host.
346 There is no documentation about this within the U-Boot source code
347 but you should be able to find something on the interwebs.
350 bool "zboot - x86 boot command"
352 With x86 machines it is common to boot a bzImage file which
353 contains both a kernel and a setup.bin file. The latter includes
354 configuration information from the dark ages which x86 boards still
355 need to pick things out of.
357 Consider using FIT in preference to this since it supports directly
358 booting both 32- and 64-bit kernels, as well as secure boot.
359 Documentation is available in doc/uImage.FIT/x86-fit-boot.txt
363 menu "Environment commands"
366 bool "ask for env variable"
368 Ask for environment variable
386 Edit environment variable.
391 Allow for searching environment variables
397 Save all environment variables into the compiled-in persistent
400 config CMD_ENV_EXISTS
404 Check if a variable is defined in the environment for use in
407 config CMD_ENV_CALLBACK
408 bool "env callbacks - print callbacks and their associated variables"
410 Some environment variable have callbacks defined by
411 U_BOOT_ENV_CALLBACK. These are called when the variable changes.
412 For example changing "baudrate" adjust the serial baud rate. This
413 command lists the currently defined callbacks.
416 bool "env flags -print variables that have non-default flags"
418 Some environment variables have special flags that control their
419 behaviour. For example, serial# can only be written once and cannot
420 be deleted. This command shows the variables that have special
425 menu "Memory commands"
430 Compute binary operations (xor, or, and) of byte arrays of arbitrary
431 size from memory and store the result in memory or the environment.
444 Add -v option to verify data against a crc32 checksum.
447 bool "eeprom - EEPROM subsystem"
449 (deprecated, needs conversion to driver model)
450 Provides commands to read and write EEPROM (Electrically Erasable
451 Programmable Read Only Memory) chips that are connected over an
454 config CMD_EEPROM_LAYOUT
455 bool "Enable layout-aware eeprom commands"
456 depends on CMD_EEPROM
458 (deprecated, needs conversion to driver model)
459 When enabled, additional eeprom sub-commands become available.
461 eeprom print - prints the contents of the eeprom in a human-readable
462 way (eeprom layout fields, and data formatted to be fit for human
465 eeprom update - allows user to update eeprom fields by specifying
466 the field name, and providing the new data in a human readable format
467 (same format as displayed by the eeprom print command).
469 Both commands can either auto detect the layout, or be told which
473 __weak int parse_layout_version(char *str)
474 - override to provide your own layout name parsing
475 __weak void __eeprom_layout_assign(struct eeprom_layout *layout,
477 - override to setup the layout metadata based on the version
478 __weak int eeprom_layout_detect(unsigned char *data)
479 - override to provide your own algorithm for detecting layout
482 - contains various printing and updating functions for common
483 types of eeprom fields. Can be used for defining
486 config EEPROM_LAYOUT_HELP_STRING
487 string "Tells user what layout names are supported"
488 depends on CMD_EEPROM_LAYOUT
489 default "<not defined>"
491 Help printed with the LAYOUT VERSIONS part of the 'eeprom'
497 Infinite write loop on address range
504 Compute MD5 checksum.
509 depends on CMD_MD5SUM
511 Add -v option to verify data against an MD5 checksum.
516 Display memory information.
519 bool "md, mm, nm, mw, cp, cmp, base, loop"
524 mm - memory modify (auto-incrementing address)
525 nm - memory modify (constant address)
526 mw - memory write (fill)
529 base - print or set address offset
530 loop - initialize loop on address range
535 Simple RAM read/write test.
539 config SYS_ALT_MEMTEST
540 bool "Alternative test"
542 Use a more complete alternative memory test.
549 mdc - memory display cyclic
550 mwc - memory write cyclic
556 Compute SHA1 checksum.
558 config SHA1SUM_VERIFY
560 depends on CMD_SHA1SUM
562 Add -v option to verify data against a SHA1 checksum.
565 bool "strings - display strings in memory"
567 This works similarly to the Unix 'strings' command except that it
568 works with a memory range. String of printable characters found
569 within the range are displayed. The minimum number of characters
570 for a sequence to be considered a string can be provided.
574 menu "Compression commands"
578 default y if CMD_BOOTI
581 Support decompressing an LZMA (Lempel-Ziv-Markov chain algorithm)
586 default y if CMD_BOOTI
588 Uncompress a zip-compressed memory region.
593 Compress a memory region with zlib deflate method.
597 menu "Device access commands"
600 #depends on FLASH_CFI_DRIVER
603 ARM Ltd reference designs flash partition access
606 bool "adc - Access Analog to Digital Converters info and data"
610 Shows ADC device info and permit printing one-shot analog converted
611 data from a named Analog to Digital Converter.
614 bool "bind/unbind - Bind or unbind a device to/from a driver"
617 Bind or unbind a device to/from a driver from the command line.
618 This is useful in situations where a device may be handled by several
619 drivers. For example, this can be used to bind a UDC to the usb ether
620 gadget driver from the command line.
623 bool "clk - Show clock frequencies"
626 Shows clock frequences by calling a sock_clk_dump() hook function.
627 This is depreated in favour of using the CLK uclass and accessing
628 clock values from associated drivers. However currently no command
632 bool "demo - Demonstration commands for driver model"
635 Provides a 'demo' command which can be used to play around with
636 driver model. To use this properly you will need to enable one or
637 both of the demo devices (DM_DEMO_SHAPE and DM_DEMO_SIMPLE).
638 Otherwise you will always get an empty list of devices. The demo
639 devices are defined in the sandbox device tree, so the easiest
640 option is to use sandbox and pass the -d point to sandbox's
647 Enables the command "dfu" which is used to have U-Boot create a DFU
648 class device via USB. This command requires that the "dfu_alt_info"
649 environment variable be set and define the alt settings to expose to
653 bool "dm - Access to driver model information"
656 Provides access to driver model data structures and information,
657 such as a list of devices, list of uclasses and the state of each
658 device (e.g. activated). This is not required for operation, but
659 can be useful to see the state of driver model for debugging or
663 bool "fastboot - Android fastboot support"
666 This enables the command "fastboot" which enables the Android
667 fastboot mode for the platform. Fastboot is a protocol for
668 downloading images, flashing and device control used on
669 Android devices. Fastboot requires either the network stack
670 enabled or support for acting as a USB device.
672 See doc/README.android-fastboot for more information.
675 bool "fdcboot - Boot from floppy device"
677 The 'fdtboot' command allows booting an image from a floppy disk.
680 bool "flinfo, erase, protect"
684 flinfo - print FLASH memory information
686 protect - enable or disable FLASH write protection
695 config CMD_FPGA_LOADBP
696 bool "fpga loadbp - load partial bitstream (Xilinx only)"
699 Supports loading an FPGA device from a bitstream buffer containing
702 config CMD_FPGA_LOADFS
703 bool "fpga loadfs - load bitstream from FAT filesystem (Xilinx only)"
706 Supports loading an FPGA device from a FAT filesystem.
708 config CMD_FPGA_LOADMK
709 bool "fpga loadmk - load bitstream from image"
712 Supports loading an FPGA device from a image generated by mkimage.
714 config CMD_FPGA_LOADP
715 bool "fpga loadp - load partial bitstream"
718 Supports loading an FPGA device from a bitstream buffer containing
721 config CMD_FPGA_LOAD_SECURE
722 bool "fpga loads - loads secure bitstreams (Xilinx only)"
725 Enables the fpga loads command which is used to load secure
726 (authenticated or encrypted or both) bitstreams on to FPGA.
729 bool "fpgad - dump FPGA registers"
731 (legacy, needs conversion to driver model)
732 Provides a way to dump FPGA registers by calling the board-specific
733 fpga_get_reg() function. This functions similarly to the 'md'
737 bool "fuse - support for the fuse subssystem"
739 (deprecated - needs conversion to driver model)
740 This allows reading, sensing, programming or overriding fuses
741 which control the behaviour of the device. The command uses the
750 bool "GPT (GUID Partition Table) command"
752 select HAVE_BLOCK_DEVICE
753 select PARTITION_UUIDS
756 Enable the 'gpt' command to ready and write GPT style partition
760 bool "GPT Random UUID generation"
763 Enable the generation of partitions with random UUIDs if none
766 config CMD_GPT_RENAME
767 bool "GPT partition renaming commands"
770 Enables the 'gpt' command to interchange names on two GPT
771 partitions via the 'gpt swap' command or to rename single
772 partitions via the 'rename' command.
775 bool "ide - Support for IDE drivers"
778 Provides an 'ide' command which allows accessing the IDE drive,
779 reseting the IDE interface, printing the partition table and
780 geting device info. It also enables the 'diskboot' command which
781 permits booting from an IDE drive.
784 bool "io - Support for performing I/O accesses"
786 Provides an 'iod' command to display I/O space and an 'iow' command
787 to write values to the I/O space. This can be useful for manually
788 checking the state of devices during boot when debugging device
792 bool "iotrace - Support for tracing I/O activity"
794 Provides an 'iotrace' command which supports recording I/O reads and
795 writes in a trace buffer in memory . It also maintains a checksum
796 of the trace records (even if space is exhausted) so that the
797 sequence of I/O accesses can be verified.
799 When debugging drivers it is useful to see what I/O accesses were
800 done and in what order.
802 Even if the individual accesses are of little interest it can be
803 useful to verify that the access pattern is consistent each time
804 an operation is performed. In this case a checksum can be used to
805 characterise the operation of a driver. The checksum can be compared
806 across different runs of the operation to verify that the driver is
809 In particular, when performing major refactoring of the driver, where
810 the access pattern should not change, the checksum provides assurance
811 that the refactoring work has not broken the driver.
813 This works by sneaking into the io.h heder for an architecture and
814 redirecting I/O accesses through iotrace's tracing mechanism.
816 For now no commands are provided to examine the trace buffer. The
817 format is fairly simple, so 'md' is a reasonable substitute.
819 Note: The checksum feature is only useful for I/O regions where the
820 contents do not change outside of software control. Where this is not
821 suitable you can fall back to manually comparing the addresses. It
822 might be useful to enhance tracing to only checksum the accesses and
823 not the data read/written.
833 bool "w1 - Support for Dallas 1-Wire protocol"
835 Dallas 1-wire protocol support
841 Load a binary file over serial line.
847 Load an S-Record file over serial line
852 MMC memory mapped support.
855 bool "Enable support for RPMB in the mmc command"
858 Enable the commands for reading, writing and programming the
859 key for the Replay Protection Memory Block partition in eMMC.
861 config CMD_MMC_SWRITE
863 depends on CMD_MMC && MMC_WRITE
866 Enable support for the "mmc swrite" command to write Android sparse
871 select MTD_PARTITIONS
873 MTD commands support.
877 default y if NAND_SUNXI
882 config CMD_NAND_TRIMFFS
883 bool "nand write.trimffs"
884 default y if ARCH_SUNXI
886 Allows one to skip empty pages when flashing something on a NAND.
888 config CMD_NAND_LOCK_UNLOCK
889 bool "nand lock/unlock"
891 NAND locking support.
893 config CMD_NAND_TORTURE
896 NAND torture support.
905 NVM Express device support
908 bool "mmc_spi - Set up MMC SPI device"
910 Provides a way to set up an MMC (Multimedia Card) SPI (Serial
911 Peripheral Interface) device. The device provides a means of
912 accessing an MMC device via SPI using a single data line, limited
913 to 20MHz. It is useful since it reduces the amount of protocol code
917 bool "onenand - access to onenand device"
919 OneNAND is a brand of NAND ('Not AND' gate) flash which provides
920 various useful features. This command allows reading, writing,
921 and erasing blocks. It allso provides a way to show and change
922 bad blocks, and test the device.
927 Enable the 'osd' command which allows to query information from and
928 write text data to a on-screen display (OSD) device; a virtual device
929 associated with a display capable of displaying a text overlay on the
930 display it's associated with..
934 select HAVE_BLOCK_DEVICE
935 select PARTITION_UUIDS
937 Read and display information about the partition table on
941 bool "pci - Access PCI devices"
943 Provide access to PCI (Peripheral Interconnect Bus), a type of bus
944 used on some devices to allow the CPU to communicate with its
945 peripherals. Sub-commands allow bus enumeration, displaying and
946 changing configuration space and a few other features.
949 bool "pinit - Set up PCMCIA device"
951 Provides a means to initialise a PCMCIA (Personal Computer Memory
952 Card International Association) device. This is an old standard from
953 about 1990. These devices are typically removable memory or network
954 cards using a standard 68-pin connector.
959 Poweroff/Shutdown the system
962 bool "read - Read binary data from a partition"
964 Provides low-level access to the data in a partition.
966 config CMD_REMOTEPROC
968 depends on REMOTEPROC
970 Support for Remote Processor control
973 bool "sata - Access SATA subsystem"
976 SATA (Serial Advanced Technology Attachment) is a serial bus
977 standard for connecting to hard drives and other storage devices.
978 This command provides information about attached devices and allows
979 reading, writing and other operations.
981 SATA replaces PATA (originally just ATA), which stands for Parallel AT
982 Attachment, where AT refers to an IBM AT (Advanced Technology)
983 computer released in 1984.
986 bool "saves - Save a file over serial in S-Record format"
988 Provides a way to save a binary file using the Motorola S-Record
989 format over the serial line.
992 bool "scsi - Access to SCSI devices"
995 This provides a 'scsi' command which provides access to SCSI (Small
996 Computer System Interface) devices. The command provides a way to
997 scan the bus, reset the bus, read and write data and get information
1001 bool "sdram - Print SDRAM configuration information"
1003 Provides information about attached SDRAM. This assumed that the
1004 SDRAM has an EEPROM with information that can be read using the
1005 I2C bus. This is only available on some boards.
1013 bool "sf test - Allow testing of SPI flash"
1015 Provides a way to test that SPI flash is working correctly. The
1016 test is destructive, in that an area of SPI flash must be provided
1017 for the test to use. Performance information is also provided,
1018 measuring the performance of reading, writing and erasing in
1019 Mbps (Million Bits Per Second). This value should approximately
1020 equal the SPI bus speed for a single-bit-wide SPI bus, assuming
1021 everything is working properly.
1026 SPI utility command.
1029 bool "tsi148 - Command to access tsi148 device"
1031 This provides various sub-commands to initialise and configure the
1032 Turndra tsi148 device. See the command help for full details.
1035 bool "universe - Command to set up the Turndra Universe controller"
1037 This allows setting up the VMEbus provided by this controller.
1038 See the command help for full details.
1042 select HAVE_BLOCK_DEVICE
1048 select USB_FUNCTION_SDP
1050 Enables the command "sdp" which is used to have U-Boot emulating the
1051 Serial Download Protocol (SDP) via USB.
1055 depends on USB_FUNCTION_ROCKUSB
1057 Rockusb protocol is widely used by Rockchip SoC based devices. It can
1058 read/write info, image to/from devices. This enable rockusb command
1059 support to communication with rockusb device. for more detail about
1060 this command, please read doc/README.rockusb.
1062 config CMD_USB_MASS_STORAGE
1063 bool "UMS usb mass storage"
1064 select USB_FUNCTION_MASS_STORAGE
1066 USB mass storage support
1072 Enable the command "axi" for accessing AXI (Advanced eXtensible
1073 Interface) busses, a on-chip interconnect specification for managing
1074 functional blocks in SoC designs, which is also often used in designs
1075 involving FPGAs (e.g. communication with IP cores in Xilinx FPGAs).
1079 menu "Shell scripting commands"
1085 Echo args to console
1091 Return true/false on integer compare.
1097 Run script from memory
1103 Evaluate boolean and math expressions and store the result in an env
1105 Also supports loading the value at a memory location into a variable.
1106 If CONFIG_REGEX is enabled, setexpr also supports a gsub function.
1113 bool "Network commands"
1123 bootp - boot image via network using BOOTP/TFTP protocol
1127 depends on CMD_BOOTP
1129 Boot image via network using DHCP/TFTP protocol
1131 config BOOTP_BOOTPATH
1132 bool "Request & store 'rootpath' from BOOTP/DHCP server"
1134 depends on CMD_BOOTP
1136 Even though the config is called BOOTP_BOOTPATH, it stores the
1137 path in the variable 'rootpath'.
1140 bool "Request & store 'dnsip' from BOOTP/DHCP server"
1142 depends on CMD_BOOTP
1144 The primary DNS server is stored as 'dnsip'. If two servers are
1145 returned, you must set BOOTP_DNS2 to store that second server IP
1149 bool "Store 'dnsip2' from BOOTP/DHCP server"
1150 depends on BOOTP_DNS
1152 If a DHCP client requests the DNS server IP from a DHCP server,
1153 it is possible that more than one DNS serverip is offered to the
1154 client. If CONFIG_BOOTP_DNS2 is enabled, the secondary DNS
1155 server IP will be stored in the additional environment
1156 variable "dnsip2". The first DNS serverip is always
1157 stored in the variable "dnsip", when BOOTP_DNS is defined.
1159 config BOOTP_GATEWAY
1160 bool "Request & store 'gatewayip' from BOOTP/DHCP server"
1162 depends on CMD_BOOTP
1164 config BOOTP_HOSTNAME
1165 bool "Request & store 'hostname' from BOOTP/DHCP server"
1167 depends on CMD_BOOTP
1169 The name may or may not be qualified with the local domain name.
1171 config BOOTP_PREFER_SERVERIP
1172 bool "serverip variable takes precedent over DHCP server IP."
1173 depends on CMD_BOOTP
1175 By default a BOOTP/DHCP reply will overwrite the 'serverip' variable.
1177 With this option enabled, the 'serverip' variable in the environment
1178 takes precedence over DHCP server IP and will only be set by the DHCP
1179 server if not already set in the environment.
1181 config BOOTP_SUBNETMASK
1182 bool "Request & store 'netmask' from BOOTP/DHCP server"
1184 depends on CMD_BOOTP
1186 config BOOTP_NTPSERVER
1187 bool "Request & store 'ntpserverip' from BOOTP/DHCP server"
1188 depends on CMD_BOOTP
1191 bool "Send PXE client arch to BOOTP/DHCP server"
1193 depends on CMD_BOOTP && CMD_PXE
1195 Supported for ARM, ARM64, and x86 for now.
1197 config BOOTP_PXE_CLIENTARCH
1199 depends on BOOTP_PXE
1200 default 0x16 if ARM64
1204 config BOOTP_VCI_STRING
1206 depends on CMD_BOOTP
1207 default "U-Boot.armv7" if CPU_V7A || CPU_V7M || CPU_V7R
1208 default "U-Boot.armv8" if ARM64
1209 default "U-Boot.arm" if ARM
1216 tftpboot - boot image via network using TFTP protocol
1220 depends on CMD_TFTPBOOT
1222 TFTP put command, for uploading files to a server
1226 depends on CMD_TFTPBOOT
1228 Act as a TFTP server and boot the first received file
1230 config NET_TFTP_VARS
1231 bool "Control TFTP timeout and count through environment"
1232 depends on CMD_TFTPBOOT
1235 If set, allows controlling the TFTP timeout through the
1236 environment variable tftptimeout, and the TFTP maximum
1237 timeout count through the variable tftptimeoutcountmax.
1238 If unset, timeout and maximum are hard-defined as 1 second
1239 and 10 timouts per TFTP transfer.
1244 Boot image via network using RARP/TFTP protocol
1250 Boot image via network using NFS protocol.
1255 Enable MII utility commands.
1260 Send ICMP ECHO_REQUEST to network host
1265 Perform CDP network configuration
1270 Synchronize RTC via network
1275 Lookup the IP of a hostname
1277 config CMD_LINK_LOCAL
1281 Acquire a network IP address using the link-local protocol
1288 Allow control of L2 Ethernet switch commands. These are supported
1289 by the vsc9953 Ethernet driver at present. Sub-commands allow
1290 operations such as enabling / disabling a port and
1291 viewing/maintaining the filtering database (FDB)
1297 Boot image via network using PXE protocol
1302 Wait for wake-on-lan Magic Packet
1306 menu "Misc commands"
1309 bool "Enable 'bmp' command"
1310 depends on LCD || DM_VIDEO || VIDEO
1312 This provides a way to obtain information about a BMP-format iamge
1313 and to display it. BMP (which presumably stands for BitMaP) is a
1314 file format defined by Microsoft which supports images of various
1315 depths, formats and compression methods. Headers on the file
1316 determine the formats used. This command can be used by first loading
1317 the image into RAM, then using this command to look at it or display
1320 config CMD_BOOTCOUNT
1322 depends on BOOTCOUNT_LIMIT
1324 Enable the bootcount command, which allows interrogation and
1325 reset of the bootcounter.
1328 bool "Enable board-specific commands"
1330 (deprecated: instead, please define a Kconfig option for each command)
1332 Some boards have board-specific commands which are only enabled
1333 during developemnt and need to be turned off for production. This
1334 option provides a way to control this. The commands that are enabled
1335 vary depending on the board.
1337 config CMD_BKOPS_ENABLE
1338 bool "mmc bkops enable"
1342 Enable command for setting manual background operations handshake
1343 on a eMMC device. The feature is optionally available on eMMC devices
1344 conforming to standard >= 4.41.
1346 config CMD_BLOCK_CACHE
1347 bool "blkcache - control and stats for block cache"
1348 depends on BLOCK_CACHE
1349 default y if BLOCK_CACHE
1351 Enable the blkcache command, which can be used to control the
1352 operation of the cache functions.
1353 This is most useful when fine-tuning the operation of the cache
1354 during development, but also allows the cache to be disabled when
1355 it might hurt performance (e.g. when using the ums command).
1358 bool "icache or dcache"
1360 Enable the "icache" and "dcache" commands
1362 config CMD_CONITRACE
1363 bool "conitrace - trace console input codes"
1365 Enable the 'conitrace' command which displays the codes received
1366 from the console input as hexadecimal numbers.
1369 bool "Enable the 'display' command, for character displays"
1371 (this needs porting to driver model)
1372 This enables the 'display' command which allows a string to be
1373 displayed on a simple board-specific display. Implement
1374 display_putc() to use it.
1380 Enable the 'led' command which allows for control of LEDs supported
1381 by the board. The LEDs can be listed with 'led list' and controlled
1382 with led on/off/togle/blink. Any LED drivers can be controlled with
1383 this command, e.g. led_gpio.
1389 Enable the 'date' command for getting/setting the time/date in RTC
1395 Run commands and summarize execution time.
1398 bool "gettime - read elapsed time"
1400 Enable the 'gettime' command which reads the elapsed time since
1401 U-Boot started running. This shows the time in seconds and
1402 milliseconds. See also the 'bootstage' command which provides more
1403 flexibility for boot timing.
1405 # TODO: rename to CMD_SLEEP
1410 Delay execution for some time
1413 bool "support for multiprocessor"
1415 This provides an option to brinup
1416 different processors in multiprocessor
1422 Access the system timer.
1428 This provides basic access to the U-Boot's sound support. The main
1429 feature is to play a beep.
1431 sound init - set up sound system
1432 sound play - play a sound
1438 This provides access to the QEMU firmware interface. The main
1439 feature is to allow easy loading of files passed to qemu-system
1440 via -kernel / -initrd
1442 source "cmd/mvebu/Kconfig"
1445 bool "terminal - provides a way to attach a serial terminal"
1447 Provides a 'cu'-like serial terminal command. This can be used to
1448 access other serial ports from the system console. The terminal
1449 is very simple with no special processing of characters. As with
1450 cu, you can press ~. (tilde followed by period) to exit.
1453 bool "uuid, guid - generation of unique IDs"
1456 This enables two commands:
1458 uuid - generate random Universally Unique Identifier
1459 guid - generate Globally Unique Identifier based on random UUID
1461 The two commands are very similar except for the endianness of the
1466 source "cmd/ti/Kconfig"
1468 config CMD_BOOTSTAGE
1469 bool "Enable the 'bootstage' command"
1470 depends on BOOTSTAGE
1472 Add a 'bootstage' command which supports printing a report
1473 and un/stashing of bootstage data.
1475 menu "Power commands"
1477 bool "Enable Driver Model PMIC command"
1480 This is the pmic command, based on a driver model pmic's API.
1481 Command features are unchanged:
1482 - list - list pmic devices
1483 - pmic dev <id> - show or [set] operating pmic device (NEW)
1484 - pmic dump - dump registers
1485 - pmic read address - read byte of register at address
1486 - pmic write address - write byte to register at address
1487 The only one change for this command is 'dev' subcommand.
1489 config CMD_REGULATOR
1490 bool "Enable Driver Model REGULATOR command"
1491 depends on DM_REGULATOR
1493 This command is based on driver model regulator's API.
1494 User interface features:
1495 - list - list regulator devices
1496 - regulator dev <id> - show or [set] operating regulator device
1497 - regulator info - print constraints info
1498 - regulator status - print operating status
1499 - regulator value <val] <-f> - print/[set] voltage value [uV]
1500 - regulator current <val> - print/[set] current value [uA]
1501 - regulator mode <id> - print/[set] operating mode id
1502 - regulator enable - enable the regulator output
1503 - regulator disable - disable the regulator output
1505 The '-f' (force) option can be used for set the value which exceeds
1506 the limits, which are found in device-tree and are kept in regulator's
1507 uclass platdata structure.
1511 menu "Security commands"
1513 bool "Enable the 'aes' command"
1516 This provides a means to encrypt and decrypt data using the AES
1517 (Advanced Encryption Standard). This algorithm uses a symetric key
1518 and is widely used as a streaming cipher. Different key lengths are
1519 supported by the algorithm but this command only supports 128 bits
1523 bool "Enable the 'blob' command"
1525 This is used with the Freescale secure boot mechanism.
1527 Freescale's SEC block has built-in Blob Protocol which provides
1528 a method for protecting user-defined data across system power
1529 cycles. SEC block protects data in a data structure called a Blob,
1530 which provides both confidentiality and integrity protection.
1532 Encapsulating data as a blob
1533 Each time that the Blob Protocol is used to protect data, a
1534 different randomly generated key is used to encrypt the data.
1535 This random key is itself encrypted using a key which is derived
1536 from SoC's non-volatile secret key and a 16 bit Key identifier.
1537 The resulting encrypted key along with encrypted data is called a
1538 blob. The non-volatile secure key is available for use only during
1541 During decapsulation, the reverse process is performed to get back
1545 blob enc - encapsulating data as a cryptgraphic blob
1546 blob dec - decapsulating cryptgraphic blob to get the data
1550 blob enc src dst len km
1552 Encapsulate and create blob of data $len bytes long
1553 at address $src and store the result at address $dst.
1554 $km is the 16 byte key modifier is also required for
1555 generation/use as key for cryptographic operation. Key
1556 modifier should be 16 byte long.
1558 blob dec src dst len km
1560 Decapsulate the blob of data at address $src and
1561 store result of $len byte at addr $dst.
1562 $km is the 16 byte key modifier is also required for
1563 generation/use as key for cryptographic operation. Key
1564 modifier should be 16 byte long.
1567 bool "Support 'hash' command"
1570 This provides a way to hash data in memory using various supported
1571 algorithms (such as SHA1, MD5, CRC32). The computed digest can be
1572 saved to memory or to an environment variable. It is also possible
1573 to verify a hash against data in memory.
1576 bool "Support the 'hvc' command"
1577 depends on ARM_SMCCC
1579 Allows issuing Hypervisor Calls (HVCs). Mostly useful for
1580 development and testing.
1583 bool "Support the 'smc' command"
1584 depends on ARM_SMCCC
1586 Allows issuing Secure Monitor Calls (SMCs). Mostly useful for
1587 development and testing.
1593 Add -v option to verify data against a hash.
1603 bool "Enable the 'tpm' command"
1604 depends on TPM_V1 || TPM_V2
1605 select CMD_TPM_V1 if TPM_V1
1606 select CMD_TPM_V2 if TPM_V2
1608 This provides a means to talk to a TPM from the command line. A wide
1609 range of commands if provided - see 'tpm help' for details. The
1610 command requires a suitable TPM on your board and the correct driver
1616 bool "Enable the 'tpm test' command"
1619 This provides a a series of tests to confirm that the TPMv1.x is
1620 working correctly. The tests cover initialisation, non-volatile RAM,
1621 extend, global lock and checking that timing is within expectations.
1622 The tests pass correctly on Infineon TPMs but may need to be adjusted
1629 menu "Firmware commands"
1631 bool "Enable crosec command"
1635 Enable command-line access to the Chrome OS EC (Embedded
1636 Controller). This provides the 'crosec' command which has
1637 a number of sub-commands for performing EC tasks such as
1638 updating its flash, accessing a small saved context area
1639 and talking to the I2C bus behind the EC (if there is one).
1642 menu "Filesystem commands"
1644 bool "Enable the 'btrsubvol' command"
1647 This enables the 'btrsubvol' command to list subvolumes
1648 of a BTRFS filesystem. There are no special commands for
1649 listing BTRFS directories or loading BTRFS files - this
1650 can be done by the generic 'fs' commands (see CMD_FS_GENERIC)
1651 when BTRFS is enabled (see FS_BTRFS).
1654 bool "Enable the 'cbfs' command"
1657 Define this to enable support for reading from a Coreboot
1658 filesystem. This is a ROM-based filesystem used for accessing files
1659 on systems that use coreboot as the first boot-loader and then load
1660 U-Boot to actually boot the Operating System. Available commands are
1661 cbfsinit, cbfsinfo, cbfsls and cbfsload.
1664 bool "Enable the 'cramfs' command"
1665 depends on FS_CRAMFS
1667 This provides commands for dealing with CRAMFS (Compressed ROM
1668 filesystem). CRAMFS is useful when space is tight since files are
1669 compressed. Two commands are provided:
1671 cramfsls - lists files in a cramfs image
1672 cramfsload - loads a file from a cramfs image
1675 bool "ext2 command support"
1678 Enables EXT2 FS command
1681 bool "ext4 command support"
1684 Enables EXT4 FS command
1686 config CMD_EXT4_WRITE
1688 bool "ext4 write command support"
1691 Enables EXT4 FS write command
1694 bool "FAT command support"
1697 Support for the FAT fs
1699 config CMD_FS_GENERIC
1700 bool "filesystem commands"
1702 Enables filesystem commands (e.g. load, ls) that work for multiple
1706 bool "fsuuid command"
1708 Enables fsuuid command for filesystem UUID.
1711 bool "jffs2 command"
1714 Enables commands to support the JFFS2 (Journalling Flash File System
1715 version 2) filesystem. This enables fsload, ls and fsinfo which
1716 provide the ability to load files, list directories and obtain
1717 filesystem information.
1720 bool "MTD partition support"
1721 select MTD_DEVICE if (CMD_NAND || NAND)
1723 MTD partitioning tool support.
1724 It is strongly encouraged to avoid using this command
1725 anymore along with 'sf', 'nand', 'onenand'. One can still
1726 declare the partitions in the mtdparts environment variable
1727 but better use the MTD stack and the 'mtd' command instead.
1729 config MTDIDS_DEFAULT
1730 string "Default MTD IDs"
1731 depends on CMD_MTD || CMD_MTDPARTS || CMD_NAND || CMD_FLASH
1733 Defines a default MTD IDs list for use with MTD partitions in the
1734 Linux MTD command line partitions format.
1736 config MTDPARTS_DEFAULT
1737 string "Default MTD partition scheme"
1738 depends on CMD_MTD || CMD_MTDPARTS || CMD_NAND || CMD_FLASH
1740 Defines a default MTD partitioning scheme in the Linux MTD command
1741 line partitions format
1743 config CMD_MTDPARTS_SPREAD
1744 bool "Padd partition size to take account of bad blocks"
1745 depends on CMD_MTDPARTS
1747 This enables the 'spread' sub-command of the mtdparts command.
1748 This command will modify the existing mtdparts variable by increasing
1749 the size of the partitions such that 1) each partition's net size is
1750 at least as large as the size specified in the mtdparts variable and
1751 2) each partition starts on a good block.
1754 bool "reiser - Access to reiserfs filesystems"
1756 This provides two commands which operate on a resierfs filesystem,
1757 commonly used some years ago:
1759 reiserls - list files
1760 reiserload - load a file
1763 bool "yaffs2 - Access of YAFFS2 filesystem"
1767 This provides commands for accessing a YAFFS2 filesystem. Yet
1768 Another Flash Filesystem 2 is a filesystem designed specifically
1769 for NAND flash. It incorporates bad-block management and ensures
1770 that device writes are sequential regardless of filesystem
1774 bool "zfs - Access of ZFS filesystem"
1776 This provides commands to accessing a ZFS filesystem, commonly used
1777 on Solaris systems. Two sub-commands are provided:
1779 zfsls - list files in a directory
1780 zfsload - load a file
1782 See doc/README.zfs for more details.
1786 menu "Debug commands"
1791 The bedbug (emBEDded deBUGger) command provides debugging features
1792 for some PowerPC processors. For details please see the
1793 docuemntation in doc/README.beddbug
1796 bool "diag - Board diagnostics"
1798 This command provides access to board diagnostic tests. These are
1799 called Power-on Self Tests (POST). The command allows listing of
1800 available tests and running either all the tests, or specific tests
1804 bool "irq - Show information about interrupts"
1805 depends on !ARM && !MIPS && !SH
1807 This enables two commands:
1809 interrupts - enable or disable interrupts
1810 irqinfo - print device-specific interrupt information
1813 bool "kgdb - Allow debugging of U-Boot with gdb"
1815 This enables a 'kgdb' command which allows gdb to connect to U-Boot
1816 over a serial link for debugging purposes. This allows
1817 single-stepping, inspecting variables, etc. This is supported only
1818 on PowerPC at present.
1821 bool "log - Generation, control and access to logging"
1824 This provides access to logging features. It allows the output of
1825 log data to be controlled to a limited extent (setting up the default
1826 maximum log level for emitting of records). It also provides access
1827 to a command used for testing the log system.
1830 bool "trace - Support tracing of function calls and timing"
1832 Enables a command to control using of function tracing within
1833 U-Boot. This allows recording of call traces including timing
1834 information. The command can write data to memory for exporting
1835 for analsys (e.g. using bootchart). See doc/README.trace for full
1839 bool "avb - Android Verified Boot 2.0 operations"
1840 depends on AVB_VERIFY
1843 Enables a "avb" command to perform verification of partitions using
1844 Android Verified Boot 2.0 functionality. It includes such subcommands:
1845 avb init - initialize avb2 subsystem
1846 avb read_rb - read rollback index
1847 avb write_rb - write rollback index
1848 avb is_unlocked - check device lock state
1849 avb get_uuid - read and print uuid of a partition
1850 avb read_part - read data from partition
1851 avb read_part_hex - read data from partition and output to stdout
1852 avb write_part - write data to partition
1853 avb verify - run full verification chain
1857 tristate "Enable UBI - Unsorted block images commands"
1862 UBI is a software layer above MTD layer which admits use of LVM-like
1863 logical volumes on top of MTD devices, hides some complexities of
1864 flash chips like wear and bad blocks and provides some other useful
1865 capabilities. Please, consult the MTD web site for more details
1866 (www.linux-mtd.infradead.org). Activate this option if you want
1867 to use U-Boot UBI commands.
1868 It is also strongly encouraged to also enable CONFIG_MTD to get full
1872 tristate "Enable UBIFS - Unsorted block images filesystem commands"
1874 default y if CMD_UBI
1878 UBIFS is a file system for flash devices which works on top of UBI.
git.openpandora.org / pandora-u-boot.git / blob