1 // SPDX-License-Identifier: GPL-2.0+
6 * Heiko Schocher, DENX Software Engineering, hs@denx.de.
9 * Board functions for TI AM335X based boards
11 * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
18 #include <asm/arch/cpu.h>
19 #include <asm/arch/hardware.h>
20 #include <asm/arch/omap.h>
21 #include <asm/arch/ddr_defs.h>
22 #include <asm/arch/clock.h>
23 #include <asm/arch/gpio.h>
24 #include <asm/arch/mmc_host_def.h>
25 #include <asm/arch/sys_proto.h>
26 #include <asm/arch/mem.h>
33 #include <power/tps65217.h>
34 #include <env_internal.h>
39 DECLARE_GLOBAL_DATA_PTR;
41 static struct shc_eeprom __attribute__((section(".data"))) header;
42 static int shc_eeprom_valid;
45 * Read header information from EEPROM into global structure.
47 static int read_eeprom(void)
49 /* Check if baseboard eeprom is available */
50 if (i2c_probe(CONFIG_SYS_I2C_EEPROM_ADDR)) {
51 puts("Could not probe the EEPROM; something fundamentally wrong on the I2C bus.\n");
55 /* read the eeprom using i2c */
56 if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, (uchar *)&header,
58 puts("Could not read the EEPROM; something fundamentally wrong on the I2C bus.\n");
62 if (header.magic != HDR_MAGIC) {
63 printf("Incorrect magic number (0x%x) in EEPROM\n",
73 static void shc_request_gpio(void)
75 gpio_request(LED_PWR_BL_GPIO, "LED PWR BL");
76 gpio_request(LED_PWR_RD_GPIO, "LED PWR RD");
77 gpio_request(RESET_GPIO, "reset");
78 gpio_request(WIFI_REGEN_GPIO, "WIFI REGEN");
79 gpio_request(WIFI_RST_GPIO, "WIFI rst");
80 gpio_request(ZIGBEE_RST_GPIO, "ZigBee rst");
81 gpio_request(BIDCOS_RST_GPIO, "BIDCOS rst");
82 gpio_request(ENOC_RST_GPIO, "ENOC rst");
83 #if defined CONFIG_B_SAMPLE
84 gpio_request(LED_PWR_GN_GPIO, "LED PWR GN");
85 gpio_request(LED_CONN_BL_GPIO, "LED CONN BL");
86 gpio_request(LED_CONN_RD_GPIO, "LED CONN RD");
87 gpio_request(LED_CONN_GN_GPIO, "LED CONN GN");
89 gpio_request(LED_LAN_BL_GPIO, "LED LAN BL");
90 gpio_request(LED_LAN_RD_GPIO, "LED LAN RD");
91 gpio_request(LED_CLOUD_BL_GPIO, "LED CLOUD BL");
92 gpio_request(LED_CLOUD_RD_GPIO, "LED CLOUD RD");
93 gpio_request(LED_PWM_GPIO, "LED PWM");
94 gpio_request(Z_WAVE_RST_GPIO, "Z WAVE rst");
96 gpio_request(BACK_BUTTON_GPIO, "Back button");
97 gpio_request(FRONT_BUTTON_GPIO, "Front button");
101 * Function which forces all installed modules into running state for ICT
102 * testing. Called by SPL.
104 static void __maybe_unused force_modules_running(void)
106 /* Wi-Fi power regulator enable - high = enabled */
107 gpio_direction_output(WIFI_REGEN_GPIO, 1);
109 * Wait for Wi-Fi power regulator to reach a stable voltage
110 * (soft-start time, max. 350 µs)
114 /* Wi-Fi module reset - high = running */
115 gpio_direction_output(WIFI_RST_GPIO, 1);
117 /* ZigBee reset - high = running */
118 gpio_direction_output(ZIGBEE_RST_GPIO, 1);
120 /* BidCos reset - high = running */
121 gpio_direction_output(BIDCOS_RST_GPIO, 1);
123 #if !defined(CONFIG_B_SAMPLE)
124 /* Z-Wave reset - high = running */
125 gpio_direction_output(Z_WAVE_RST_GPIO, 1);
128 /* EnOcean reset - low = running */
129 gpio_direction_output(ENOC_RST_GPIO, 0);
133 * Function which forces all installed modules into reset - to be released by
134 * the OS, called by SPL
136 static void __maybe_unused force_modules_reset(void)
138 /* Wi-Fi module reset - low = reset */
139 gpio_direction_output(WIFI_RST_GPIO, 0);
141 /* Wi-Fi power regulator enable - low = disabled */
142 gpio_direction_output(WIFI_REGEN_GPIO, 0);
144 /* ZigBee reset - low = reset */
145 gpio_direction_output(ZIGBEE_RST_GPIO, 0);
147 /* BidCos reset - low = reset */
148 /*gpio_direction_output(BIDCOS_RST_GPIO, 0);*/
150 #if !defined(CONFIG_B_SAMPLE)
151 /* Z-Wave reset - low = reset */
152 gpio_direction_output(Z_WAVE_RST_GPIO, 0);
155 /* EnOcean reset - high = reset*/
156 gpio_direction_output(ENOC_RST_GPIO, 1);
160 * Function to set the LEDs in the state "Bootloader booting"
162 static void __maybe_unused leds_set_booting(void)
164 #if defined(CONFIG_B_SAMPLE)
166 /* Turn all red LEDs on */
167 gpio_direction_output(LED_PWR_RD_GPIO, 1);
168 gpio_direction_output(LED_CONN_RD_GPIO, 1);
170 #else /* All other SHCs starting with B2-Sample */
171 /* Set the PWM GPIO */
172 gpio_direction_output(LED_PWM_GPIO, 1);
173 /* Turn all red LEDs on */
174 gpio_direction_output(LED_PWR_RD_GPIO, 1);
175 gpio_direction_output(LED_LAN_RD_GPIO, 1);
176 gpio_direction_output(LED_CLOUD_RD_GPIO, 1);
182 * Function to set the LEDs in the state "Bootloader error"
184 static void leds_set_failure(int state)
186 #if defined(CONFIG_B_SAMPLE)
187 /* Turn all blue and green LEDs off */
188 gpio_set_value(LED_PWR_BL_GPIO, 0);
189 gpio_set_value(LED_PWR_GN_GPIO, 0);
190 gpio_set_value(LED_CONN_BL_GPIO, 0);
191 gpio_set_value(LED_CONN_GN_GPIO, 0);
193 /* Turn all red LEDs to 'state' */
194 gpio_set_value(LED_PWR_RD_GPIO, state);
195 gpio_set_value(LED_CONN_RD_GPIO, state);
197 #else /* All other SHCs starting with B2-Sample */
198 /* Set the PWM GPIO */
199 gpio_direction_output(LED_PWM_GPIO, 1);
201 /* Turn all blue LEDs off */
202 gpio_set_value(LED_PWR_BL_GPIO, 0);
203 gpio_set_value(LED_LAN_BL_GPIO, 0);
204 gpio_set_value(LED_CLOUD_BL_GPIO, 0);
206 /* Turn all red LEDs to 'state' */
207 gpio_set_value(LED_PWR_RD_GPIO, state);
208 gpio_set_value(LED_LAN_RD_GPIO, state);
209 gpio_set_value(LED_CLOUD_RD_GPIO, state);
214 * Function to set the LEDs in the state "Bootloader finished"
216 static void leds_set_finish(void)
218 #if defined(CONFIG_B_SAMPLE)
219 /* Turn all LEDs off */
220 gpio_set_value(LED_PWR_BL_GPIO, 0);
221 gpio_set_value(LED_PWR_RD_GPIO, 0);
222 gpio_set_value(LED_PWR_GN_GPIO, 0);
223 gpio_set_value(LED_CONN_BL_GPIO, 0);
224 gpio_set_value(LED_CONN_RD_GPIO, 0);
225 gpio_set_value(LED_CONN_GN_GPIO, 0);
226 #else /* All other SHCs starting with B2-Sample */
227 /* Turn all LEDs off */
228 gpio_set_value(LED_PWR_BL_GPIO, 0);
229 gpio_set_value(LED_PWR_RD_GPIO, 0);
230 gpio_set_value(LED_LAN_BL_GPIO, 0);
231 gpio_set_value(LED_LAN_RD_GPIO, 0);
232 gpio_set_value(LED_CLOUD_BL_GPIO, 0);
233 gpio_set_value(LED_CLOUD_RD_GPIO, 0);
235 /* Turn off the PWM GPIO and mux it to EHRPWM */
236 gpio_set_value(LED_PWM_GPIO, 0);
237 enable_shc_board_pwm_pin_mux();
241 static void check_button_status(void)
244 gpio_direction_input(FRONT_BUTTON_GPIO);
245 value = gpio_get_value(FRONT_BUTTON_GPIO);
248 printf("front button activated !\n");
249 env_set("harakiri", "1");
253 #if defined(CONFIG_SPL_BUILD)
254 #ifdef CONFIG_SPL_OS_BOOT
255 int spl_start_uboot(void)
261 static void shc_board_early_init(void)
264 # ifdef CONFIG_SHC_ICT
265 /* Force all modules into enabled state for ICT testing */
266 force_modules_running();
268 /* Force all modules to enter Reset state until released by the OS */
269 force_modules_reset();
274 static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
276 #define MPU_SPREADING_PERMILLE 18 /* Spread 1.8 percent */
277 #define OSC (V_OSCK/1000000)
278 /* Bosch: Predivider must be fixed to 4, so N = 4-1 */
279 #define MPUPLL_N (4-1)
280 /* Bosch: Fref = 24 MHz / (N+1) = 24 MHz / 4 = 6 MHz */
281 #define MPUPLL_FREF (OSC / (MPUPLL_N + 1))
283 const struct dpll_params dpll_ddr_shc = {
284 400, OSC-1, 1, -1, -1, -1, -1};
286 const struct dpll_params *get_dpll_ddr_params(void)
288 return &dpll_ddr_shc;
292 * As we enabled downspread SSC with 1.8%, the values needed to be corrected
293 * such that the 20% overshoot will not lead to too high frequencies.
294 * In all cases, this is achieved by subtracting one from M (6 MHz less).
295 * Example: 600 MHz CPU
296 * Step size: 24 MHz OSC, N = 4 (fix) --> Fref = 6 MHz
297 * 600 MHz - 6 MHz (1x Fref) = 594 MHz
298 * SSC: 594 MHz * 1.8% = 10.7 MHz SSC
299 * Overshoot: 10.7 MHz * 20 % = 2.2 MHz
300 * --> Fmax = 594 MHz + 2.2 MHz = 596.2 MHz, lower than 600 MHz --> OK!
302 const struct dpll_params dpll_mpu_shc_opp100 = {
303 99, MPUPLL_N, 1, -1, -1, -1, -1};
305 void am33xx_spl_board_init(void)
313 * Set CORE Frequency to OPP100
314 * Hint: DCDC3 (CORE) defaults to 1.100V (for OPP100)
316 do_setup_dpll(&dpll_core_regs, &dpll_core_opp100);
318 sil_rev = readl(&cdev->deviceid) >> 28;
320 puts("We do not support Silicon Revisions below 2.0!\n");
324 dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev);
325 if (i2c_probe(TPS65217_CHIP_PM))
329 * Retrieve the CPU max frequency by reading the efuse
330 * SHC-Default: 600 MHz
332 switch (dpll_mpu_opp100.m) {
334 mpu_vdd = TPS65217_DCDC_VOLT_SEL_1325MV;
337 mpu_vdd = TPS65217_DCDC_VOLT_SEL_1275MV;
340 mpu_vdd = TPS65217_DCDC_VOLT_SEL_1200MV;
343 mpu_vdd = TPS65217_DCDC_VOLT_SEL_1100MV;
346 mpu_vdd = TPS65217_DCDC_VOLT_SEL_950MV;
349 puts("Cannot determine the frequency, failing!\n");
353 if (tps65217_voltage_update(TPS65217_DEFDCDC2, mpu_vdd)) {
354 puts("tps65217_voltage_update failure\n");
358 /* Set MPU Frequency to what we detected */
359 printf("MPU reference clock runs at %d MHz\n", MPUPLL_FREF);
360 printf("Setting MPU clock to %d MHz\n", MPUPLL_FREF *
361 dpll_mpu_shc_opp100.m);
362 do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_shc_opp100);
364 /* Enable Spread Spectrum for this freq to be clean on EMI side */
365 set_mpu_spreadspectrum(MPU_SPREADING_PERMILLE);
368 * Using the default voltages for the PMIC (TPS65217D)
369 * LS1 = 1.8V (VDD_1V8)
370 * LS2 = 3.3V (VDD_3V3A)
371 * LDO1 = 1.8V (VIO and VRTC)
372 * LDO2 = 3.3V (VDD_3V3AUX)
374 shc_board_early_init();
377 void set_uart_mux_conf(void)
379 enable_uart0_pin_mux();
382 void set_mux_conf_regs(void)
384 enable_shc_board_pin_mux();
387 const struct ctrl_ioregs ioregs_evmsk = {
388 .cm0ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
389 .cm1ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
390 .cm2ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
391 .dt0ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
392 .dt1ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
395 static const struct ddr_data ddr3_shc_data = {
396 .datardsratio0 = MT41K256M16HA125E_RD_DQS,
397 .datawdsratio0 = MT41K256M16HA125E_WR_DQS,
398 .datafwsratio0 = MT41K256M16HA125E_PHY_FIFO_WE,
399 .datawrsratio0 = MT41K256M16HA125E_PHY_WR_DATA,
402 static const struct cmd_control ddr3_shc_cmd_ctrl_data = {
403 .cmd0csratio = MT41K256M16HA125E_RATIO,
404 .cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
406 .cmd1csratio = MT41K256M16HA125E_RATIO,
407 .cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
409 .cmd2csratio = MT41K256M16HA125E_RATIO,
410 .cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
413 static struct emif_regs ddr3_shc_emif_reg_data = {
414 .sdram_config = MT41K256M16HA125E_EMIF_SDCFG,
415 .ref_ctrl = MT41K256M16HA125E_EMIF_SDREF,
416 .sdram_tim1 = MT41K256M16HA125E_EMIF_TIM1,
417 .sdram_tim2 = MT41K256M16HA125E_EMIF_TIM2,
418 .sdram_tim3 = MT41K256M16HA125E_EMIF_TIM3,
419 .zq_config = MT41K256M16HA125E_ZQ_CFG,
420 .emif_ddr_phy_ctlr_1 = MT41K256M16HA125E_EMIF_READ_LATENCY |
424 void sdram_init(void)
426 /* Configure the DDR3 RAM */
427 config_ddr(400, &ioregs_evmsk, &ddr3_shc_data,
428 &ddr3_shc_cmd_ctrl_data, &ddr3_shc_emif_reg_data, 0);
433 * Basic board specific setup. Pinmux has been handled already.
437 #if defined(CONFIG_HW_WATCHDOG)
440 i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
441 if (read_eeprom() < 0)
442 puts("EEPROM Content Invalid.\n");
444 gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
445 #if defined(CONFIG_NOR) || defined(CONFIG_NAND)
453 #ifdef CONFIG_BOARD_LATE_INIT
454 int board_late_init(void)
456 check_button_status();
457 #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
458 if (shc_eeprom_valid)
459 if (is_valid_ethaddr(header.mac_addr))
460 eth_env_set_enetaddr("ethaddr", header.mac_addr);
467 #if defined(CONFIG_USB_ETHER) && \
468 (!defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_USB_ETHER))
469 int board_eth_init(bd_t *bis)
471 return usb_eth_initialize(bis);
475 #ifdef CONFIG_SHOW_BOOT_PROGRESS
476 static void bosch_check_reset_pin(void)
478 if (readl(GPIO1_BASE + OMAP_GPIO_IRQSTATUS_SET_0) & RESET_MASK) {
479 printf("Resetting ...\n");
480 writel(RESET_MASK, GPIO1_BASE + OMAP_GPIO_IRQSTATUS_SET_0);
481 disable_interrupts();
487 static void hang_bosch(const char *cause, int code)
491 gpio_direction_input(RESET_GPIO);
493 /* Enable reset pin interrupt on falling edge */
494 writel(RESET_MASK, GPIO1_BASE + OMAP_GPIO_IRQSTATUS_SET_0);
495 writel(RESET_MASK, GPIO1_BASE + OMAP_GPIO_FALLINGDETECT);
500 for (lv = 0; lv < code; lv++) {
501 bosch_check_reset_pin();
503 __udelay(150 * 1000);
505 __udelay(150 * 1000);
507 #if defined(BLINK_CODE)
508 __udelay(300 * 1000);
513 void show_boot_progress(int val)
516 case BOOTSTAGE_ID_NEED_RESET:
517 hang_bosch("need reset", 4);
522 void arch_preboot_os(void)