x86, microcode: microcode_core.c simple_strtoul cleanup
[pandora-kernel.git] / arch / x86 / kernel / microcode_core.c
1 /*
2  *      Intel CPU Microcode Update Driver for Linux
3  *
4  *      Copyright (C) 2000-2006 Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
5  *                    2006      Shaohua Li <shaohua.li@intel.com>
6  *
7  *      This driver allows to upgrade microcode on Intel processors
8  *      belonging to IA-32 family - PentiumPro, Pentium II,
9  *      Pentium III, Xeon, Pentium 4, etc.
10  *
11  *      Reference: Section 8.11 of Volume 3a, IA-32 Intel? Architecture
12  *      Software Developer's Manual
13  *      Order Number 253668 or free download from:
14  *
15  *      http://developer.intel.com/Assets/PDF/manual/253668.pdf 
16  *
17  *      For more information, go to http://www.urbanmyth.org/microcode
18  *
19  *      This program is free software; you can redistribute it and/or
20  *      modify it under the terms of the GNU General Public License
21  *      as published by the Free Software Foundation; either version
22  *      2 of the License, or (at your option) any later version.
23  *
24  *      1.0     16 Feb 2000, Tigran Aivazian <tigran@sco.com>
25  *              Initial release.
26  *      1.01    18 Feb 2000, Tigran Aivazian <tigran@sco.com>
27  *              Added read() support + cleanups.
28  *      1.02    21 Feb 2000, Tigran Aivazian <tigran@sco.com>
29  *              Added 'device trimming' support. open(O_WRONLY) zeroes
30  *              and frees the saved copy of applied microcode.
31  *      1.03    29 Feb 2000, Tigran Aivazian <tigran@sco.com>
32  *              Made to use devfs (/dev/cpu/microcode) + cleanups.
33  *      1.04    06 Jun 2000, Simon Trimmer <simon@veritas.com>
34  *              Added misc device support (now uses both devfs and misc).
35  *              Added MICROCODE_IOCFREE ioctl to clear memory.
36  *      1.05    09 Jun 2000, Simon Trimmer <simon@veritas.com>
37  *              Messages for error cases (non Intel & no suitable microcode).
38  *      1.06    03 Aug 2000, Tigran Aivazian <tigran@veritas.com>
39  *              Removed ->release(). Removed exclusive open and status bitmap.
40  *              Added microcode_rwsem to serialize read()/write()/ioctl().
41  *              Removed global kernel lock usage.
42  *      1.07    07 Sep 2000, Tigran Aivazian <tigran@veritas.com>
43  *              Write 0 to 0x8B msr and then cpuid before reading revision,
44  *              so that it works even if there were no update done by the
45  *              BIOS. Otherwise, reading from 0x8B gives junk (which happened
46  *              to be 0 on my machine which is why it worked even when I
47  *              disabled update by the BIOS)
48  *              Thanks to Eric W. Biederman <ebiederman@lnxi.com> for the fix.
49  *      1.08    11 Dec 2000, Richard Schaal <richard.schaal@intel.com> and
50  *                           Tigran Aivazian <tigran@veritas.com>
51  *              Intel Pentium 4 processor support and bugfixes.
52  *      1.09    30 Oct 2001, Tigran Aivazian <tigran@veritas.com>
53  *              Bugfix for HT (Hyper-Threading) enabled processors
54  *              whereby processor resources are shared by all logical processors
55  *              in a single CPU package.
56  *      1.10    28 Feb 2002 Asit K Mallick <asit.k.mallick@intel.com> and
57  *              Tigran Aivazian <tigran@veritas.com>,
58  *              Serialize updates as required on HT processors due to
59  *              speculative nature of implementation.
60  *      1.11    22 Mar 2002 Tigran Aivazian <tigran@veritas.com>
61  *              Fix the panic when writing zero-length microcode chunk.
62  *      1.12    29 Sep 2003 Nitin Kamble <nitin.a.kamble@intel.com>,
63  *              Jun Nakajima <jun.nakajima@intel.com>
64  *              Support for the microcode updates in the new format.
65  *      1.13    10 Oct 2003 Tigran Aivazian <tigran@veritas.com>
66  *              Removed ->read() method and obsoleted MICROCODE_IOCFREE ioctl
67  *              because we no longer hold a copy of applied microcode
68  *              in kernel memory.
69  *      1.14    25 Jun 2004 Tigran Aivazian <tigran@veritas.com>
70  *              Fix sigmatch() macro to handle old CPUs with pf == 0.
71  *              Thanks to Stuart Swales for pointing out this bug.
72  */
73
74 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
75
76 #include <linux/platform_device.h>
77 #include <linux/miscdevice.h>
78 #include <linux/capability.h>
79 #include <linux/kernel.h>
80 #include <linux/module.h>
81 #include <linux/mutex.h>
82 #include <linux/cpu.h>
83 #include <linux/fs.h>
84 #include <linux/mm.h>
85 #include <linux/syscore_ops.h>
86
87 #include <asm/microcode.h>
88 #include <asm/processor.h>
89
90 MODULE_DESCRIPTION("Microcode Update Driver");
91 MODULE_AUTHOR("Tigran Aivazian <tigran@aivazian.fsnet.co.uk>");
92 MODULE_LICENSE("GPL");
93
94 #define MICROCODE_VERSION       "2.00"
95
96 static struct microcode_ops     *microcode_ops;
97
98 /*
99  * Synchronization.
100  *
101  * All non cpu-hotplug-callback call sites use:
102  *
103  * - microcode_mutex to synchronize with each other;
104  * - get/put_online_cpus() to synchronize with
105  *   the cpu-hotplug-callback call sites.
106  *
107  * We guarantee that only a single cpu is being
108  * updated at any particular moment of time.
109  */
110 static DEFINE_MUTEX(microcode_mutex);
111
112 struct ucode_cpu_info           ucode_cpu_info[NR_CPUS];
113 EXPORT_SYMBOL_GPL(ucode_cpu_info);
114
115 /*
116  * Operations that are run on a target cpu:
117  */
118
119 struct cpu_info_ctx {
120         struct cpu_signature    *cpu_sig;
121         int                     err;
122 };
123
124 static void collect_cpu_info_local(void *arg)
125 {
126         struct cpu_info_ctx *ctx = arg;
127
128         ctx->err = microcode_ops->collect_cpu_info(smp_processor_id(),
129                                                    ctx->cpu_sig);
130 }
131
132 static int collect_cpu_info_on_target(int cpu, struct cpu_signature *cpu_sig)
133 {
134         struct cpu_info_ctx ctx = { .cpu_sig = cpu_sig, .err = 0 };
135         int ret;
136
137         ret = smp_call_function_single(cpu, collect_cpu_info_local, &ctx, 1);
138         if (!ret)
139                 ret = ctx.err;
140
141         return ret;
142 }
143
144 static int collect_cpu_info(int cpu)
145 {
146         struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
147         int ret;
148
149         memset(uci, 0, sizeof(*uci));
150
151         ret = collect_cpu_info_on_target(cpu, &uci->cpu_sig);
152         if (!ret)
153                 uci->valid = 1;
154
155         return ret;
156 }
157
158 struct apply_microcode_ctx {
159         int err;
160 };
161
162 static void apply_microcode_local(void *arg)
163 {
164         struct apply_microcode_ctx *ctx = arg;
165
166         ctx->err = microcode_ops->apply_microcode(smp_processor_id());
167 }
168
169 static int apply_microcode_on_target(int cpu)
170 {
171         struct apply_microcode_ctx ctx = { .err = 0 };
172         int ret;
173
174         ret = smp_call_function_single(cpu, apply_microcode_local, &ctx, 1);
175         if (!ret)
176                 ret = ctx.err;
177
178         return ret;
179 }
180
181 #ifdef CONFIG_MICROCODE_OLD_INTERFACE
182 static int do_microcode_update(const void __user *buf, size_t size)
183 {
184         int error = 0;
185         int cpu;
186
187         for_each_online_cpu(cpu) {
188                 struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
189                 enum ucode_state ustate;
190
191                 if (!uci->valid)
192                         continue;
193
194                 ustate = microcode_ops->request_microcode_user(cpu, buf, size);
195                 if (ustate == UCODE_ERROR) {
196                         error = -1;
197                         break;
198                 } else if (ustate == UCODE_OK)
199                         apply_microcode_on_target(cpu);
200         }
201
202         return error;
203 }
204
205 static int microcode_open(struct inode *inode, struct file *file)
206 {
207         return capable(CAP_SYS_RAWIO) ? nonseekable_open(inode, file) : -EPERM;
208 }
209
210 static ssize_t microcode_write(struct file *file, const char __user *buf,
211                                size_t len, loff_t *ppos)
212 {
213         ssize_t ret = -EINVAL;
214
215         if ((len >> PAGE_SHIFT) > totalram_pages) {
216                 pr_err("too much data (max %ld pages)\n", totalram_pages);
217                 return ret;
218         }
219
220         get_online_cpus();
221         mutex_lock(&microcode_mutex);
222
223         if (do_microcode_update(buf, len) == 0)
224                 ret = (ssize_t)len;
225
226         mutex_unlock(&microcode_mutex);
227         put_online_cpus();
228
229         return ret;
230 }
231
232 static const struct file_operations microcode_fops = {
233         .owner                  = THIS_MODULE,
234         .write                  = microcode_write,
235         .open                   = microcode_open,
236         .llseek         = no_llseek,
237 };
238
239 static struct miscdevice microcode_dev = {
240         .minor                  = MICROCODE_MINOR,
241         .name                   = "microcode",
242         .nodename               = "cpu/microcode",
243         .fops                   = &microcode_fops,
244 };
245
246 static int __init microcode_dev_init(void)
247 {
248         int error;
249
250         error = misc_register(&microcode_dev);
251         if (error) {
252                 pr_err("can't misc_register on minor=%d\n", MICROCODE_MINOR);
253                 return error;
254         }
255
256         return 0;
257 }
258
259 static void __exit microcode_dev_exit(void)
260 {
261         misc_deregister(&microcode_dev);
262 }
263
264 MODULE_ALIAS_MISCDEV(MICROCODE_MINOR);
265 MODULE_ALIAS("devname:cpu/microcode");
266 #else
267 #define microcode_dev_init()    0
268 #define microcode_dev_exit()    do { } while (0)
269 #endif
270
271 /* fake device for request_firmware */
272 static struct platform_device   *microcode_pdev;
273
274 static int reload_for_cpu(int cpu)
275 {
276         struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
277         int err = 0;
278
279         mutex_lock(&microcode_mutex);
280         if (uci->valid) {
281                 enum ucode_state ustate;
282
283                 ustate = microcode_ops->request_microcode_fw(cpu, &microcode_pdev->dev);
284                 if (ustate == UCODE_OK)
285                         apply_microcode_on_target(cpu);
286                 else
287                         if (ustate == UCODE_ERROR)
288                                 err = -EINVAL;
289         }
290         mutex_unlock(&microcode_mutex);
291
292         return err;
293 }
294
295 static ssize_t reload_store(struct sys_device *dev,
296                             struct sysdev_attribute *attr,
297                             const char *buf, size_t size)
298 {
299         unsigned long val;
300         int cpu = dev->id;
301         ssize_t ret = 0;
302
303         ret = kstrtoul(buf, 0, &val);
304         if (ret)
305                 return ret;
306
307         if (val == 1) {
308                 get_online_cpus();
309                 if (cpu_online(cpu))
310                         ret = reload_for_cpu(cpu);
311                 put_online_cpus();
312         }
313
314         if (!ret)
315                 ret = size;
316
317         return ret;
318 }
319
320 static ssize_t version_show(struct sys_device *dev,
321                         struct sysdev_attribute *attr, char *buf)
322 {
323         struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
324
325         return sprintf(buf, "0x%x\n", uci->cpu_sig.rev);
326 }
327
328 static ssize_t pf_show(struct sys_device *dev,
329                         struct sysdev_attribute *attr, char *buf)
330 {
331         struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
332
333         return sprintf(buf, "0x%x\n", uci->cpu_sig.pf);
334 }
335
336 static SYSDEV_ATTR(reload, 0200, NULL, reload_store);
337 static SYSDEV_ATTR(version, 0400, version_show, NULL);
338 static SYSDEV_ATTR(processor_flags, 0400, pf_show, NULL);
339
340 static struct attribute *mc_default_attrs[] = {
341         &attr_reload.attr,
342         &attr_version.attr,
343         &attr_processor_flags.attr,
344         NULL
345 };
346
347 static struct attribute_group mc_attr_group = {
348         .attrs                  = mc_default_attrs,
349         .name                   = "microcode",
350 };
351
352 static void microcode_fini_cpu(int cpu)
353 {
354         struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
355
356         microcode_ops->microcode_fini_cpu(cpu);
357         uci->valid = 0;
358 }
359
360 static enum ucode_state microcode_resume_cpu(int cpu)
361 {
362         struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
363
364         if (!uci->mc)
365                 return UCODE_NFOUND;
366
367         pr_debug("CPU%d updated upon resume\n", cpu);
368         apply_microcode_on_target(cpu);
369
370         return UCODE_OK;
371 }
372
373 static enum ucode_state microcode_init_cpu(int cpu)
374 {
375         enum ucode_state ustate;
376
377         if (collect_cpu_info(cpu))
378                 return UCODE_ERROR;
379
380         /* --dimm. Trigger a delayed update? */
381         if (system_state != SYSTEM_RUNNING)
382                 return UCODE_NFOUND;
383
384         ustate = microcode_ops->request_microcode_fw(cpu, &microcode_pdev->dev);
385
386         if (ustate == UCODE_OK) {
387                 pr_debug("CPU%d updated upon init\n", cpu);
388                 apply_microcode_on_target(cpu);
389         }
390
391         return ustate;
392 }
393
394 static enum ucode_state microcode_update_cpu(int cpu)
395 {
396         struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
397         enum ucode_state ustate;
398
399         if (uci->valid)
400                 ustate = microcode_resume_cpu(cpu);
401         else
402                 ustate = microcode_init_cpu(cpu);
403
404         return ustate;
405 }
406
407 static int mc_sysdev_add(struct sys_device *sys_dev)
408 {
409         int err, cpu = sys_dev->id;
410
411         if (!cpu_online(cpu))
412                 return 0;
413
414         pr_debug("CPU%d added\n", cpu);
415
416         err = sysfs_create_group(&sys_dev->kobj, &mc_attr_group);
417         if (err)
418                 return err;
419
420         if (microcode_init_cpu(cpu) == UCODE_ERROR)
421                 return -EINVAL;
422
423         return err;
424 }
425
426 static int mc_sysdev_remove(struct sys_device *sys_dev)
427 {
428         int cpu = sys_dev->id;
429
430         if (!cpu_online(cpu))
431                 return 0;
432
433         pr_debug("CPU%d removed\n", cpu);
434         microcode_fini_cpu(cpu);
435         sysfs_remove_group(&sys_dev->kobj, &mc_attr_group);
436         return 0;
437 }
438
439 static struct sysdev_driver mc_sysdev_driver = {
440         .add                    = mc_sysdev_add,
441         .remove                 = mc_sysdev_remove,
442 };
443
444 /**
445  * mc_bp_resume - Update boot CPU microcode during resume.
446  */
447 static void mc_bp_resume(void)
448 {
449         int cpu = smp_processor_id();
450         struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
451
452         if (uci->valid && uci->mc)
453                 microcode_ops->apply_microcode(cpu);
454 }
455
456 static struct syscore_ops mc_syscore_ops = {
457         .resume                 = mc_bp_resume,
458 };
459
460 static __cpuinit int
461 mc_cpu_callback(struct notifier_block *nb, unsigned long action, void *hcpu)
462 {
463         unsigned int cpu = (unsigned long)hcpu;
464         struct sys_device *sys_dev;
465
466         sys_dev = get_cpu_sysdev(cpu);
467         switch (action) {
468         case CPU_ONLINE:
469         case CPU_ONLINE_FROZEN:
470                 microcode_update_cpu(cpu);
471         case CPU_DOWN_FAILED:
472         case CPU_DOWN_FAILED_FROZEN:
473                 pr_debug("CPU%d added\n", cpu);
474                 if (sysfs_create_group(&sys_dev->kobj, &mc_attr_group))
475                         pr_err("Failed to create group for CPU%d\n", cpu);
476                 break;
477         case CPU_DOWN_PREPARE:
478         case CPU_DOWN_PREPARE_FROZEN:
479                 /* Suspend is in progress, only remove the interface */
480                 sysfs_remove_group(&sys_dev->kobj, &mc_attr_group);
481                 pr_debug("CPU%d removed\n", cpu);
482                 break;
483
484         /*
485          * When a CPU goes offline, don't free up or invalidate the copy of
486          * the microcode in kernel memory, so that we can reuse it when the
487          * CPU comes back online without unnecessarily requesting the userspace
488          * for it again.
489          */
490         case CPU_UP_CANCELED_FROZEN:
491                 /* The CPU refused to come up during a system resume */
492                 microcode_fini_cpu(cpu);
493                 break;
494         }
495         return NOTIFY_OK;
496 }
497
498 static struct notifier_block __refdata mc_cpu_notifier = {
499         .notifier_call  = mc_cpu_callback,
500 };
501
502 static int __init microcode_init(void)
503 {
504         struct cpuinfo_x86 *c = &cpu_data(0);
505         int error;
506
507         if (c->x86_vendor == X86_VENDOR_INTEL)
508                 microcode_ops = init_intel_microcode();
509         else if (c->x86_vendor == X86_VENDOR_AMD)
510                 microcode_ops = init_amd_microcode();
511
512         if (!microcode_ops) {
513                 pr_err("no support for this CPU vendor\n");
514                 return -ENODEV;
515         }
516
517         microcode_pdev = platform_device_register_simple("microcode", -1,
518                                                          NULL, 0);
519         if (IS_ERR(microcode_pdev))
520                 return PTR_ERR(microcode_pdev);
521
522         get_online_cpus();
523         mutex_lock(&microcode_mutex);
524
525         error = sysdev_driver_register(&cpu_sysdev_class, &mc_sysdev_driver);
526
527         mutex_unlock(&microcode_mutex);
528         put_online_cpus();
529
530         if (error)
531                 goto out_pdev;
532
533         error = microcode_dev_init();
534         if (error)
535                 goto out_sysdev_driver;
536
537         register_syscore_ops(&mc_syscore_ops);
538         register_hotcpu_notifier(&mc_cpu_notifier);
539
540         pr_info("Microcode Update Driver: v" MICROCODE_VERSION
541                 " <tigran@aivazian.fsnet.co.uk>, Peter Oruba\n");
542
543         return 0;
544
545 out_sysdev_driver:
546         get_online_cpus();
547         mutex_lock(&microcode_mutex);
548
549         sysdev_driver_unregister(&cpu_sysdev_class, &mc_sysdev_driver);
550
551         mutex_unlock(&microcode_mutex);
552         put_online_cpus();
553
554 out_pdev:
555         platform_device_unregister(microcode_pdev);
556         return error;
557
558 }
559 module_init(microcode_init);
560
561 static void __exit microcode_exit(void)
562 {
563         microcode_dev_exit();
564
565         unregister_hotcpu_notifier(&mc_cpu_notifier);
566         unregister_syscore_ops(&mc_syscore_ops);
567
568         get_online_cpus();
569         mutex_lock(&microcode_mutex);
570
571         sysdev_driver_unregister(&cpu_sysdev_class, &mc_sysdev_driver);
572
573         mutex_unlock(&microcode_mutex);
574         put_online_cpus();
575
576         platform_device_unregister(microcode_pdev);
577
578         microcode_ops = NULL;
579
580         pr_info("Microcode Update Driver: v" MICROCODE_VERSION " removed.\n");
581 }
582 module_exit(microcode_exit);