arch/powerpc/platforms/powernv/pci-ioda.c

   1 /*
   2  * Support PCI/PCIe on PowerNV platforms
   3  *
   4  * Copyright 2011 Benjamin Herrenschmidt, IBM Corp.
   5  *
   6  * This program is free software; you can redistribute it and/or
   7  * modify it under the terms of the GNU General Public License
   8  * as published by the Free Software Foundation; either version
   9  * 2 of the License, or (at your option) any later version.
  10  */
  11
  12 #undef DEBUG
  13
  14 #include <linux/kernel.h>
  15 #include <linux/pci.h>
  16 #include <linux/debugfs.h>
  17 #include <linux/delay.h>
  18 #include <linux/string.h>
  19 #include <linux/init.h>
  20 #include <linux/bootmem.h>
  21 #include <linux/irq.h>
  22 #include <linux/io.h>
  23 #include <linux/msi.h>
  24 #include <linux/memblock.h>
  25
  26 #include <asm/sections.h>
  27 #include <asm/io.h>
  28 #include <asm/prom.h>
  29 #include <asm/pci-bridge.h>
  30 #include <asm/machdep.h>
  31 #include <asm/msi_bitmap.h>
  32 #include <asm/ppc-pci.h>
  33 #include <asm/opal.h>
  34 #include <asm/iommu.h>
  35 #include <asm/tce.h>
  36 #include <asm/xics.h>
  37 #include <asm/debug.h>
  38
  39 #include "powernv.h"
  40 #include "pci.h"
  41
  42 #define define_pe_printk_level(func, kern_level)                \
  43 static int func(const struct pnv_ioda_pe *pe, const char *fmt, ...)     \
  44 {                                                               \
  45         struct va_format vaf;                                   \
  46         va_list args;                                           \
  47         char pfix[32];                                          \
  48         int r;                                                  \
  49                                                                 \
  50         va_start(args, fmt);                                    \
  51                                                                 \
  52         vaf.fmt = fmt;                                          \
  53         vaf.va = &args;                                         \
  54                                                                 \
  55         if (pe->pdev)                                           \
  56                 strlcpy(pfix, dev_name(&pe->pdev->dev),         \
  57                         sizeof(pfix));                          \
  58         else                                                    \
  59                 sprintf(pfix, "%04x:%02x     ",                 \
  60                         pci_domain_nr(pe->pbus),                \
  61                         pe->pbus->number);                      \
  62         r = printk(kern_level "pci %s: [PE# %.3d] %pV",         \
  63                    pfix, pe->pe_number, &vaf);                  \
  64                                                                 \
  65         va_end(args);                                           \
  66                                                                 \
  67         return r;                                               \
  68 }                                                               \
  69
  70 define_pe_printk_level(pe_err, KERN_ERR);
  71 define_pe_printk_level(pe_warn, KERN_WARNING);
  72 define_pe_printk_level(pe_info, KERN_INFO);
  73
  74 /*
  75  * stdcix is only supposed to be used in hypervisor real mode as per
  76  * the architecture spec
  77  */
  78 static inline void __raw_rm_writeq(u64 val, volatile void __iomem *paddr)
  79 {
  80         __asm__ __volatile__("stdcix %0,0,%1"
  81                 : : "r" (val), "r" (paddr) : "memory");
  82 }
  83
  84 static int pnv_ioda_alloc_pe(struct pnv_phb *phb)
  85 {
  86         unsigned long pe;
  87
  88         do {
  89                 pe = find_next_zero_bit(phb->ioda.pe_alloc,
  90                                         phb->ioda.total_pe, 0);
  91                 if (pe >= phb->ioda.total_pe)
  92                         return IODA_INVALID_PE;
  93         } while(test_and_set_bit(pe, phb->ioda.pe_alloc));
  94
  95         phb->ioda.pe_array[pe].phb = phb;
  96         phb->ioda.pe_array[pe].pe_number = pe;
  97         return pe;
  98 }
  99
 100 static void pnv_ioda_free_pe(struct pnv_phb *phb, int pe)
 101 {
 102         WARN_ON(phb->ioda.pe_array[pe].pdev);
 103
 104         memset(&phb->ioda.pe_array[pe], 0, sizeof(struct pnv_ioda_pe));
 105         clear_bit(pe, phb->ioda.pe_alloc);
 106 }
 107
 108 /* Currently those 2 are only used when MSIs are enabled, this will change
 109  * but in the meantime, we need to protect them to avoid warnings
 110  */
 111 #ifdef CONFIG_PCI_MSI
 112 static struct pnv_ioda_pe *pnv_ioda_get_pe(struct pci_dev *dev)
 113 {
 114         struct pci_controller *hose = pci_bus_to_host(dev->bus);
 115         struct pnv_phb *phb = hose->private_data;
 116         struct pci_dn *pdn = pci_get_pdn(dev);
 117
 118         if (!pdn)
 119                 return NULL;
 120         if (pdn->pe_number == IODA_INVALID_PE)
 121                 return NULL;
 122         return &phb->ioda.pe_array[pdn->pe_number];
 123 }
 124 #endif /* CONFIG_PCI_MSI */
 125
 126 static int pnv_ioda_configure_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe)
 127 {
 128         struct pci_dev *parent;
 129         uint8_t bcomp, dcomp, fcomp;
 130         long rc, rid_end, rid;
 131
 132         /* Bus validation ? */
 133         if (pe->pbus) {
 134                 int count;
 135
 136                 dcomp = OPAL_IGNORE_RID_DEVICE_NUMBER;
 137                 fcomp = OPAL_IGNORE_RID_FUNCTION_NUMBER;
 138                 parent = pe->pbus->self;
 139                 if (pe->flags & PNV_IODA_PE_BUS_ALL)
 140                         count = pe->pbus->busn_res.end - pe->pbus->busn_res.start + 1;
 141                 else
 142                         count = 1;
 143
 144                 switch(count) {
 145                 case  1: bcomp = OpalPciBusAll;         break;
 146                 case  2: bcomp = OpalPciBus7Bits;       break;
 147                 case  4: bcomp = OpalPciBus6Bits;       break;
 148                 case  8: bcomp = OpalPciBus5Bits;       break;
 149                 case 16: bcomp = OpalPciBus4Bits;       break;
 150                 case 32: bcomp = OpalPciBus3Bits;       break;
 151                 default:
 152                         pr_err("%s: Number of subordinate busses %d"
 153                                " unsupported\n",
 154                                pci_name(pe->pbus->self), count);
 155                         /* Do an exact match only */
 156                         bcomp = OpalPciBusAll;
 157                 }
 158                 rid_end = pe->rid + (count << 8);
 159         } else {
 160                 parent = pe->pdev->bus->self;
 161                 bcomp = OpalPciBusAll;
 162                 dcomp = OPAL_COMPARE_RID_DEVICE_NUMBER;
 163                 fcomp = OPAL_COMPARE_RID_FUNCTION_NUMBER;
 164                 rid_end = pe->rid + 1;
 165         }
 166
 167         /*
 168          * Associate PE in PELT. We need add the PE into the
 169          * corresponding PELT-V as well. Otherwise, the error
 170          * originated from the PE might contribute to other
 171          * PEs.
 172          */
 173         rc = opal_pci_set_pe(phb->opal_id, pe->pe_number, pe->rid,
 174                              bcomp, dcomp, fcomp, OPAL_MAP_PE);
 175         if (rc) {
 176                 pe_err(pe, "OPAL error %ld trying to setup PELT table\n", rc);
 177                 return -ENXIO;
 178         }
 179
 180         rc = opal_pci_set_peltv(phb->opal_id, pe->pe_number,
 181                                 pe->pe_number, OPAL_ADD_PE_TO_DOMAIN);
 182         if (rc)
 183                 pe_warn(pe, "OPAL error %d adding self to PELTV\n", rc);
 184         opal_pci_eeh_freeze_clear(phb->opal_id, pe->pe_number,
 185                                   OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
 186
 187         /* Add to all parents PELT-V */
 188         while (parent) {
 189                 struct pci_dn *pdn = pci_get_pdn(parent);
 190                 if (pdn && pdn->pe_number != IODA_INVALID_PE) {
 191                         rc = opal_pci_set_peltv(phb->opal_id, pdn->pe_number,
 192                                                 pe->pe_number, OPAL_ADD_PE_TO_DOMAIN);
 193                         /* XXX What to do in case of error ? */
 194                 }
 195                 parent = parent->bus->self;
 196         }
 197         /* Setup reverse map */
 198         for (rid = pe->rid; rid < rid_end; rid++)
 199                 phb->ioda.pe_rmap[rid] = pe->pe_number;
 200
 201         /* Setup one MVTs on IODA1 */
 202         if (phb->type == PNV_PHB_IODA1) {
 203                 pe->mve_number = pe->pe_number;
 204                 rc = opal_pci_set_mve(phb->opal_id, pe->mve_number,
 205                                       pe->pe_number);
 206                 if (rc) {
 207                         pe_err(pe, "OPAL error %ld setting up MVE %d\n",
 208                                rc, pe->mve_number);
 209                         pe->mve_number = -1;
 210                 } else {
 211                         rc = opal_pci_set_mve_enable(phb->opal_id,
 212                                                      pe->mve_number, OPAL_ENABLE_MVE);
 213                         if (rc) {
 214                                 pe_err(pe, "OPAL error %ld enabling MVE %d\n",
 215                                        rc, pe->mve_number);
 216                                 pe->mve_number = -1;
 217                         }
 218                 }
 219         } else if (phb->type == PNV_PHB_IODA2)
 220                 pe->mve_number = 0;
 221
 222         return 0;
 223 }
 224
 225 static void pnv_ioda_link_pe_by_weight(struct pnv_phb *phb,
 226                                        struct pnv_ioda_pe *pe)
 227 {
 228         struct pnv_ioda_pe *lpe;
 229
 230         list_for_each_entry(lpe, &phb->ioda.pe_dma_list, dma_link) {
 231                 if (lpe->dma_weight < pe->dma_weight) {
 232                         list_add_tail(&pe->dma_link, &lpe->dma_link);
 233                         return;
 234                 }
 235         }
 236         list_add_tail(&pe->dma_link, &phb->ioda.pe_dma_list);
 237 }
 238
 239 static unsigned int pnv_ioda_dma_weight(struct pci_dev *dev)
 240 {
 241         /* This is quite simplistic. The "base" weight of a device
 242          * is 10. 0 means no DMA is to be accounted for it.
 243          */
 244
 245         /* If it's a bridge, no DMA */
 246         if (dev->hdr_type != PCI_HEADER_TYPE_NORMAL)
 247                 return 0;
 248
 249         /* Reduce the weight of slow USB controllers */
 250         if (dev->class == PCI_CLASS_SERIAL_USB_UHCI ||
 251             dev->class == PCI_CLASS_SERIAL_USB_OHCI ||
 252             dev->class == PCI_CLASS_SERIAL_USB_EHCI)
 253                 return 3;
 254
 255         /* Increase the weight of RAID (includes Obsidian) */
 256         if ((dev->class >> 8) == PCI_CLASS_STORAGE_RAID)
 257                 return 15;
 258
 259         /* Default */
 260         return 10;
 261 }
 262
 263 #if 0
 264 static struct pnv_ioda_pe *pnv_ioda_setup_dev_PE(struct pci_dev *dev)
 265 {
 266         struct pci_controller *hose = pci_bus_to_host(dev->bus);
 267         struct pnv_phb *phb = hose->private_data;
 268         struct pci_dn *pdn = pci_get_pdn(dev);
 269         struct pnv_ioda_pe *pe;
 270         int pe_num;
 271
 272         if (!pdn) {
 273                 pr_err("%s: Device tree node not associated properly\n",
 274                            pci_name(dev));
 275                 return NULL;
 276         }
 277         if (pdn->pe_number != IODA_INVALID_PE)
 278                 return NULL;
 279
 280         /* PE#0 has been pre-set */
 281         if (dev->bus->number == 0)
 282                 pe_num = 0;
 283         else
 284                 pe_num = pnv_ioda_alloc_pe(phb);
 285         if (pe_num == IODA_INVALID_PE) {
 286                 pr_warning("%s: Not enough PE# available, disabling device\n",
 287                            pci_name(dev));
 288                 return NULL;
 289         }
 290
 291         /* NOTE: We get only one ref to the pci_dev for the pdn, not for the
 292          * pointer in the PE data structure, both should be destroyed at the
 293          * same time. However, this needs to be looked at more closely again
 294          * once we actually start removing things (Hotplug, SR-IOV, ...)
 295          *
 296          * At some point we want to remove the PDN completely anyways
 297          */
 298         pe = &phb->ioda.pe_array[pe_num];
 299         pci_dev_get(dev);
 300         pdn->pcidev = dev;
 301         pdn->pe_number = pe_num;
 302         pe->pdev = dev;
 303         pe->pbus = NULL;
 304         pe->tce32_seg = -1;
 305         pe->mve_number = -1;
 306         pe->rid = dev->bus->number << 8 | pdn->devfn;
 307
 308         pe_info(pe, "Associated device to PE\n");
 309
 310         if (pnv_ioda_configure_pe(phb, pe)) {
 311                 /* XXX What do we do here ? */
 312                 if (pe_num)
 313                         pnv_ioda_free_pe(phb, pe_num);
 314                 pdn->pe_number = IODA_INVALID_PE;
 315                 pe->pdev = NULL;
 316                 pci_dev_put(dev);
 317                 return NULL;
 318         }
 319
 320         /* Assign a DMA weight to the device */
 321         pe->dma_weight = pnv_ioda_dma_weight(dev);
 322         if (pe->dma_weight != 0) {
 323                 phb->ioda.dma_weight += pe->dma_weight;
 324                 phb->ioda.dma_pe_count++;
 325         }
 326
 327         /* Link the PE */
 328         pnv_ioda_link_pe_by_weight(phb, pe);
 329
 330         return pe;
 331 }
 332 #endif /* Useful for SRIOV case */
 333
 334 static void pnv_ioda_setup_same_PE(struct pci_bus *bus, struct pnv_ioda_pe *pe)
 335 {
 336         struct pci_dev *dev;
 337
 338         list_for_each_entry(dev, &bus->devices, bus_list) {
 339                 struct pci_dn *pdn = pci_get_pdn(dev);
 340
 341                 if (pdn == NULL) {
 342                         pr_warn("%s: No device node associated with device !\n",
 343                                 pci_name(dev));
 344                         continue;
 345                 }
 346                 pdn->pcidev = dev;
 347                 pdn->pe_number = pe->pe_number;
 348                 pe->dma_weight += pnv_ioda_dma_weight(dev);
 349                 if ((pe->flags & PNV_IODA_PE_BUS_ALL) && dev->subordinate)
 350                         pnv_ioda_setup_same_PE(dev->subordinate, pe);
 351         }
 352 }
 353
 354 /*
 355  * There're 2 types of PCI bus sensitive PEs: One that is compromised of
 356  * single PCI bus. Another one that contains the primary PCI bus and its
 357  * subordinate PCI devices and buses. The second type of PE is normally
 358  * orgiriated by PCIe-to-PCI bridge or PLX switch downstream ports.
 359  */
 360 static void pnv_ioda_setup_bus_PE(struct pci_bus *bus, int all)
 361 {
 362         struct pci_controller *hose = pci_bus_to_host(bus);
 363         struct pnv_phb *phb = hose->private_data;
 364         struct pnv_ioda_pe *pe;
 365         int pe_num;
 366
 367         pe_num = pnv_ioda_alloc_pe(phb);
 368         if (pe_num == IODA_INVALID_PE) {
 369                 pr_warning("%s: Not enough PE# available for PCI bus %04x:%02x\n",
 370                         __func__, pci_domain_nr(bus), bus->number);
 371                 return;
 372         }
 373
 374         pe = &phb->ioda.pe_array[pe_num];
 375         pe->flags = (all ? PNV_IODA_PE_BUS_ALL : PNV_IODA_PE_BUS);
 376         pe->pbus = bus;
 377         pe->pdev = NULL;
 378         pe->tce32_seg = -1;
 379         pe->mve_number = -1;
 380         pe->rid = bus->busn_res.start << 8;
 381         pe->dma_weight = 0;
 382
 383         if (all)
 384                 pe_info(pe, "Secondary bus %d..%d associated with PE#%d\n",
 385                         bus->busn_res.start, bus->busn_res.end, pe_num);
 386         else
 387                 pe_info(pe, "Secondary bus %d associated with PE#%d\n",
 388                         bus->busn_res.start, pe_num);
 389
 390         if (pnv_ioda_configure_pe(phb, pe)) {
 391                 /* XXX What do we do here ? */
 392                 if (pe_num)
 393                         pnv_ioda_free_pe(phb, pe_num);
 394                 pe->pbus = NULL;
 395                 return;
 396         }
 397
 398         /* Associate it with all child devices */
 399         pnv_ioda_setup_same_PE(bus, pe);
 400
 401         /* Put PE to the list */
 402         list_add_tail(&pe->list, &phb->ioda.pe_list);
 403
 404         /* Account for one DMA PE if at least one DMA capable device exist
 405          * below the bridge
 406          */
 407         if (pe->dma_weight != 0) {
 408                 phb->ioda.dma_weight += pe->dma_weight;
 409                 phb->ioda.dma_pe_count++;
 410         }
 411
 412         /* Link the PE */
 413         pnv_ioda_link_pe_by_weight(phb, pe);
 414 }
 415
 416 static void pnv_ioda_setup_PEs(struct pci_bus *bus)
 417 {
 418         struct pci_dev *dev;
 419
 420         pnv_ioda_setup_bus_PE(bus, 0);
 421
 422         list_for_each_entry(dev, &bus->devices, bus_list) {
 423                 if (dev->subordinate) {
 424                         if (pci_pcie_type(dev) == PCI_EXP_TYPE_PCI_BRIDGE)
 425                                 pnv_ioda_setup_bus_PE(dev->subordinate, 1);
 426                         else
 427                                 pnv_ioda_setup_PEs(dev->subordinate);
 428                 }
 429         }
 430 }
 431
 432 /*
 433  * Configure PEs so that the downstream PCI buses and devices
 434  * could have their associated PE#. Unfortunately, we didn't
 435  * figure out the way to identify the PLX bridge yet. So we
 436  * simply put the PCI bus and the subordinate behind the root
 437  * port to PE# here. The game rule here is expected to be changed
 438  * as soon as we can detected PLX bridge correctly.
 439  */
 440 static void pnv_pci_ioda_setup_PEs(void)
 441 {
 442         struct pci_controller *hose, *tmp;
 443
 444         list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
 445                 pnv_ioda_setup_PEs(hose->bus);
 446         }
 447 }
 448
 449 static void pnv_pci_ioda_dma_dev_setup(struct pnv_phb *phb, struct pci_dev *pdev)
 450 {
 451         struct pci_dn *pdn = pci_get_pdn(pdev);
 452         struct pnv_ioda_pe *pe;
 453
 454         /*
 455          * The function can be called while the PE#
 456          * hasn't been assigned. Do nothing for the
 457          * case.
 458          */
 459         if (!pdn || pdn->pe_number == IODA_INVALID_PE)
 460                 return;
 461
 462         pe = &phb->ioda.pe_array[pdn->pe_number];
 463         WARN_ON(get_dma_ops(&pdev->dev) != &dma_iommu_ops);
 464         set_iommu_table_base(&pdev->dev, &pe->tce32_table);
 465 }
 466
 467 static int pnv_pci_ioda_dma_set_mask(struct pnv_phb *phb,
 468                                      struct pci_dev *pdev, u64 dma_mask)
 469 {
 470         struct pci_dn *pdn = pci_get_pdn(pdev);
 471         struct pnv_ioda_pe *pe;
 472         uint64_t top;
 473         bool bypass = false;
 474
 475         if (WARN_ON(!pdn || pdn->pe_number == IODA_INVALID_PE))
 476                 return -ENODEV;;
 477
 478         pe = &phb->ioda.pe_array[pdn->pe_number];
 479         if (pe->tce_bypass_enabled) {
 480                 top = pe->tce_bypass_base + memblock_end_of_DRAM() - 1;
 481                 bypass = (dma_mask >= top);
 482         }
 483
 484         if (bypass) {
 485                 dev_info(&pdev->dev, "Using 64-bit DMA iommu bypass\n");
 486                 set_dma_ops(&pdev->dev, &dma_direct_ops);
 487                 set_dma_offset(&pdev->dev, pe->tce_bypass_base);
 488         } else {
 489                 dev_info(&pdev->dev, "Using 32-bit DMA via iommu\n");
 490                 set_dma_ops(&pdev->dev, &dma_iommu_ops);
 491                 set_iommu_table_base(&pdev->dev, &pe->tce32_table);
 492         }
 493         return 0;
 494 }
 495
 496 static void pnv_ioda_setup_bus_dma(struct pnv_ioda_pe *pe, struct pci_bus *bus)
 497 {
 498         struct pci_dev *dev;
 499
 500         list_for_each_entry(dev, &bus->devices, bus_list) {
 501                 set_iommu_table_base_and_group(&dev->dev, &pe->tce32_table);
 502                 if (dev->subordinate)
 503                         pnv_ioda_setup_bus_dma(pe, dev->subordinate);
 504         }
 505 }
 506
 507 static void pnv_pci_ioda1_tce_invalidate(struct pnv_ioda_pe *pe,
 508                                          struct iommu_table *tbl,
 509                                          __be64 *startp, __be64 *endp, bool rm)
 510 {
 511         __be64 __iomem *invalidate = rm ?
 512                 (__be64 __iomem *)pe->tce_inval_reg_phys :
 513                 (__be64 __iomem *)tbl->it_index;
 514         unsigned long start, end, inc;
 515
 516         start = __pa(startp);
 517         end = __pa(endp);
 518
 519         /* BML uses this case for p6/p7/galaxy2: Shift addr and put in node */
 520         if (tbl->it_busno) {
 521                 start <<= 12;
 522                 end <<= 12;
 523                 inc = 128 << 12;
 524                 start |= tbl->it_busno;
 525                 end |= tbl->it_busno;
 526         } else if (tbl->it_type & TCE_PCI_SWINV_PAIR) {
 527                 /* p7ioc-style invalidation, 2 TCEs per write */
 528                 start |= (1ull << 63);
 529                 end |= (1ull << 63);
 530                 inc = 16;
 531         } else {
 532                 /* Default (older HW) */
 533                 inc = 128;
 534         }
 535
 536         end |= inc - 1; /* round up end to be different than start */
 537
 538         mb(); /* Ensure above stores are visible */
 539         while (start <= end) {
 540                 if (rm)
 541                         __raw_rm_writeq(cpu_to_be64(start), invalidate);
 542                 else
 543                         __raw_writeq(cpu_to_be64(start), invalidate);
 544                 start += inc;
 545         }
 546
 547         /*
 548          * The iommu layer will do another mb() for us on build()
 549          * and we don't care on free()
 550          */
 551 }
 552
 553 static void pnv_pci_ioda2_tce_invalidate(struct pnv_ioda_pe *pe,
 554                                          struct iommu_table *tbl,
 555                                          __be64 *startp, __be64 *endp, bool rm)
 556 {
 557         unsigned long start, end, inc;
 558         __be64 __iomem *invalidate = rm ?
 559                 (__be64 __iomem *)pe->tce_inval_reg_phys :
 560                 (__be64 __iomem *)tbl->it_index;
 561
 562         /* We'll invalidate DMA address in PE scope */
 563         start = 0x2ul << 60;
 564         start |= (pe->pe_number & 0xFF);
 565         end = start;
 566
 567         /* Figure out the start, end and step */
 568         inc = tbl->it_offset + (((u64)startp - tbl->it_base) / sizeof(u64));
 569         start |= (inc << 12);
 570         inc = tbl->it_offset + (((u64)endp - tbl->it_base) / sizeof(u64));
 571         end |= (inc << 12);
 572         inc = (0x1ul << 12);
 573         mb();
 574
 575         while (start <= end) {
 576                 if (rm)
 577                         __raw_rm_writeq(cpu_to_be64(start), invalidate);
 578                 else
 579                         __raw_writeq(cpu_to_be64(start), invalidate);
 580                 start += inc;
 581         }
 582 }
 583
 584 void pnv_pci_ioda_tce_invalidate(struct iommu_table *tbl,
 585                                  __be64 *startp, __be64 *endp, bool rm)
 586 {
 587         struct pnv_ioda_pe *pe = container_of(tbl, struct pnv_ioda_pe,
 588                                               tce32_table);
 589         struct pnv_phb *phb = pe->phb;
 590
 591         if (phb->type == PNV_PHB_IODA1)
 592                 pnv_pci_ioda1_tce_invalidate(pe, tbl, startp, endp, rm);
 593         else
 594                 pnv_pci_ioda2_tce_invalidate(pe, tbl, startp, endp, rm);
 595 }
 596
 597 static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
 598                                       struct pnv_ioda_pe *pe, unsigned int base,
 599                                       unsigned int segs)
 600 {
 601
 602         struct page *tce_mem = NULL;
 603         const __be64 *swinvp;
 604         struct iommu_table *tbl;
 605         unsigned int i;
 606         int64_t rc;
 607         void *addr;
 608
 609         /* 256M DMA window, 4K TCE pages, 8 bytes TCE */
 610 #define TCE32_TABLE_SIZE        ((0x10000000 / 0x1000) * 8)
 611
 612         /* XXX FIXME: Handle 64-bit only DMA devices */
 613         /* XXX FIXME: Provide 64-bit DMA facilities & non-4K TCE tables etc.. */
 614         /* XXX FIXME: Allocate multi-level tables on PHB3 */
 615
 616         /* We shouldn't already have a 32-bit DMA associated */
 617         if (WARN_ON(pe->tce32_seg >= 0))
 618                 return;
 619
 620         /* Grab a 32-bit TCE table */
 621         pe->tce32_seg = base;
 622         pe_info(pe, " Setting up 32-bit TCE table at %08x..%08x\n",
 623                 (base << 28), ((base + segs) << 28) - 1);
 624
 625         /* XXX Currently, we allocate one big contiguous table for the
 626          * TCEs. We only really need one chunk per 256M of TCE space
 627          * (ie per segment) but that's an optimization for later, it
 628          * requires some added smarts with our get/put_tce implementation
 629          */
 630         tce_mem = alloc_pages_node(phb->hose->node, GFP_KERNEL,
 631                                    get_order(TCE32_TABLE_SIZE * segs));
 632         if (!tce_mem) {
 633                 pe_err(pe, " Failed to allocate a 32-bit TCE memory\n");
 634                 goto fail;
 635         }
 636         addr = page_address(tce_mem);
 637         memset(addr, 0, TCE32_TABLE_SIZE * segs);
 638
 639         /* Configure HW */
 640         for (i = 0; i < segs; i++) {
 641                 rc = opal_pci_map_pe_dma_window(phb->opal_id,
 642                                               pe->pe_number,
 643                                               base + i, 1,
 644                                               __pa(addr) + TCE32_TABLE_SIZE * i,
 645                                               TCE32_TABLE_SIZE, 0x1000);
 646                 if (rc) {
 647                         pe_err(pe, " Failed to configure 32-bit TCE table,"
 648                                " err %ld\n", rc);
 649                         goto fail;
 650                 }
 651         }
 652
 653         /* Setup linux iommu table */
 654         tbl = &pe->tce32_table;
 655         pnv_pci_setup_iommu_table(tbl, addr, TCE32_TABLE_SIZE * segs,
 656                                   base << 28);
 657
 658         /* OPAL variant of P7IOC SW invalidated TCEs */
 659         swinvp = of_get_property(phb->hose->dn, "ibm,opal-tce-kill", NULL);
 660         if (swinvp) {
 661                 /* We need a couple more fields -- an address and a data
 662                  * to or.  Since the bus is only printed out on table free
 663                  * errors, and on the first pass the data will be a relative
 664                  * bus number, print that out instead.
 665                  */
 666                 tbl->it_busno = 0;
 667                 pe->tce_inval_reg_phys = be64_to_cpup(swinvp);
 668                 tbl->it_index = (unsigned long)ioremap(pe->tce_inval_reg_phys,
 669                                 8);
 670                 tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE |
 671                                TCE_PCI_SWINV_PAIR;
 672         }
 673         iommu_init_table(tbl, phb->hose->node);
 674         iommu_register_group(tbl, pci_domain_nr(pe->pbus), pe->pe_number);
 675
 676         if (pe->pdev)
 677                 set_iommu_table_base_and_group(&pe->pdev->dev, tbl);
 678         else
 679                 pnv_ioda_setup_bus_dma(pe, pe->pbus);
 680
 681         return;
 682  fail:
 683         /* XXX Failure: Try to fallback to 64-bit only ? */
 684         if (pe->tce32_seg >= 0)
 685                 pe->tce32_seg = -1;
 686         if (tce_mem)
 687                 __free_pages(tce_mem, get_order(TCE32_TABLE_SIZE * segs));
 688 }
 689
 690 static void pnv_pci_ioda2_set_bypass(struct iommu_table *tbl, bool enable)
 691 {
 692         struct pnv_ioda_pe *pe = container_of(tbl, struct pnv_ioda_pe,
 693                                               tce32_table);
 694         uint16_t window_id = (pe->pe_number << 1 ) + 1;
 695         int64_t rc;
 696
 697         pe_info(pe, "%sabling 64-bit DMA bypass\n", enable ? "En" : "Dis");
 698         if (enable) {
 699                 phys_addr_t top = memblock_end_of_DRAM();
 700
 701                 top = roundup_pow_of_two(top);
 702                 rc = opal_pci_map_pe_dma_window_real(pe->phb->opal_id,
 703                                                      pe->pe_number,
 704                                                      window_id,
 705                                                      pe->tce_bypass_base,
 706                                                      top);
 707         } else {
 708                 rc = opal_pci_map_pe_dma_window_real(pe->phb->opal_id,
 709                                                      pe->pe_number,
 710                                                      window_id,
 711                                                      pe->tce_bypass_base,
 712                                                      0);
 713
 714                 /*
 715                  * We might want to reset the DMA ops of all devices on
 716                  * this PE. However in theory, that shouldn't be necessary
 717                  * as this is used for VFIO/KVM pass-through and the device
 718                  * hasn't yet been returned to its kernel driver
 719                  */
 720         }
 721         if (rc)
 722                 pe_err(pe, "OPAL error %lld configuring bypass window\n", rc);
 723         else
 724                 pe->tce_bypass_enabled = enable;
 725 }
 726
 727 static void pnv_pci_ioda2_setup_bypass_pe(struct pnv_phb *phb,
 728                                           struct pnv_ioda_pe *pe)
 729 {
 730         /* TVE #1 is selected by PCI address bit 59 */
 731         pe->tce_bypass_base = 1ull << 59;
 732
 733         /* Install set_bypass callback for VFIO */
 734         pe->tce32_table.set_bypass = pnv_pci_ioda2_set_bypass;
 735
 736         /* Enable bypass by default */
 737         pnv_pci_ioda2_set_bypass(&pe->tce32_table, true);
 738 }
 739
 740 static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
 741                                        struct pnv_ioda_pe *pe)
 742 {
 743         struct page *tce_mem = NULL;
 744         void *addr;
 745         const __be64 *swinvp;
 746         struct iommu_table *tbl;
 747         unsigned int tce_table_size, end;
 748         int64_t rc;
 749
 750         /* We shouldn't already have a 32-bit DMA associated */
 751         if (WARN_ON(pe->tce32_seg >= 0))
 752                 return;
 753
 754         /* The PE will reserve all possible 32-bits space */
 755         pe->tce32_seg = 0;
 756         end = (1 << ilog2(phb->ioda.m32_pci_base));
 757         tce_table_size = (end / 0x1000) * 8;
 758         pe_info(pe, "Setting up 32-bit TCE table at 0..%08x\n",
 759                 end);
 760
 761         /* Allocate TCE table */
 762         tce_mem = alloc_pages_node(phb->hose->node, GFP_KERNEL,
 763                                    get_order(tce_table_size));
 764         if (!tce_mem) {
 765                 pe_err(pe, "Failed to allocate a 32-bit TCE memory\n");
 766                 goto fail;
 767         }
 768         addr = page_address(tce_mem);
 769         memset(addr, 0, tce_table_size);
 770
 771         /*
 772          * Map TCE table through TVT. The TVE index is the PE number
 773          * shifted by 1 bit for 32-bits DMA space.
 774          */
 775         rc = opal_pci_map_pe_dma_window(phb->opal_id, pe->pe_number,
 776                                         pe->pe_number << 1, 1, __pa(addr),
 777                                         tce_table_size, 0x1000);
 778         if (rc) {
 779                 pe_err(pe, "Failed to configure 32-bit TCE table,"
 780                        " err %ld\n", rc);
 781                 goto fail;
 782         }
 783
 784         /* Setup linux iommu table */
 785         tbl = &pe->tce32_table;
 786         pnv_pci_setup_iommu_table(tbl, addr, tce_table_size, 0);
 787
 788         /* OPAL variant of PHB3 invalidated TCEs */
 789         swinvp = of_get_property(phb->hose->dn, "ibm,opal-tce-kill", NULL);
 790         if (swinvp) {
 791                 /* We need a couple more fields -- an address and a data
 792                  * to or.  Since the bus is only printed out on table free
 793                  * errors, and on the first pass the data will be a relative
 794                  * bus number, print that out instead.
 795                  */
 796                 tbl->it_busno = 0;
 797                 pe->tce_inval_reg_phys = be64_to_cpup(swinvp);
 798                 tbl->it_index = (unsigned long)ioremap(pe->tce_inval_reg_phys,
 799                                 8);
 800                 tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE;
 801         }
 802         iommu_init_table(tbl, phb->hose->node);
 803         iommu_register_group(tbl, pci_domain_nr(pe->pbus), pe->pe_number);
 804
 805         if (pe->pdev)
 806                 set_iommu_table_base_and_group(&pe->pdev->dev, tbl);
 807         else
 808                 pnv_ioda_setup_bus_dma(pe, pe->pbus);
 809
 810         /* Also create a bypass window */
 811         pnv_pci_ioda2_setup_bypass_pe(phb, pe);
 812         return;
 813 fail:
 814         if (pe->tce32_seg >= 0)
 815                 pe->tce32_seg = -1;
 816         if (tce_mem)
 817                 __free_pages(tce_mem, get_order(tce_table_size));
 818 }
 819
 820 static void pnv_ioda_setup_dma(struct pnv_phb *phb)
 821 {
 822         struct pci_controller *hose = phb->hose;
 823         unsigned int residual, remaining, segs, tw, base;
 824         struct pnv_ioda_pe *pe;
 825
 826         /* If we have more PE# than segments available, hand out one
 827          * per PE until we run out and let the rest fail. If not,
 828          * then we assign at least one segment per PE, plus more based
 829          * on the amount of devices under that PE
 830          */
 831         if (phb->ioda.dma_pe_count > phb->ioda.tce32_count)
 832                 residual = 0;
 833         else
 834                 residual = phb->ioda.tce32_count -
 835                         phb->ioda.dma_pe_count;
 836
 837         pr_info("PCI: Domain %04x has %ld available 32-bit DMA segments\n",
 838                 hose->global_number, phb->ioda.tce32_count);
 839         pr_info("PCI: %d PE# for a total weight of %d\n",
 840                 phb->ioda.dma_pe_count, phb->ioda.dma_weight);
 841
 842         /* Walk our PE list and configure their DMA segments, hand them
 843          * out one base segment plus any residual segments based on
 844          * weight
 845          */
 846         remaining = phb->ioda.tce32_count;
 847         tw = phb->ioda.dma_weight;
 848         base = 0;
 849         list_for_each_entry(pe, &phb->ioda.pe_dma_list, dma_link) {
 850                 if (!pe->dma_weight)
 851                         continue;
 852                 if (!remaining) {
 853                         pe_warn(pe, "No DMA32 resources available\n");
 854                         continue;
 855                 }
 856                 segs = 1;
 857                 if (residual) {
 858                         segs += ((pe->dma_weight * residual)  + (tw / 2)) / tw;
 859                         if (segs > remaining)
 860                                 segs = remaining;
 861                 }
 862
 863                 /*
 864                  * For IODA2 compliant PHB3, we needn't care about the weight.
 865                  * The all available 32-bits DMA space will be assigned to
 866                  * the specific PE.
 867                  */
 868                 if (phb->type == PNV_PHB_IODA1) {
 869                         pe_info(pe, "DMA weight %d, assigned %d DMA32 segments\n",
 870                                 pe->dma_weight, segs);
 871                         pnv_pci_ioda_setup_dma_pe(phb, pe, base, segs);
 872                 } else {
 873                         pe_info(pe, "Assign DMA32 space\n");
 874                         segs = 0;
 875                         pnv_pci_ioda2_setup_dma_pe(phb, pe);
 876                 }
 877
 878                 remaining -= segs;
 879                 base += segs;
 880         }
 881 }
 882
 883 #ifdef CONFIG_PCI_MSI
 884 static void pnv_ioda2_msi_eoi(struct irq_data *d)
 885 {
 886         unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
 887         struct irq_chip *chip = irq_data_get_irq_chip(d);
 888         struct pnv_phb *phb = container_of(chip, struct pnv_phb,
 889                                            ioda.irq_chip);
 890         int64_t rc;
 891
 892         rc = opal_pci_msi_eoi(phb->opal_id, hw_irq);
 893         WARN_ON_ONCE(rc);
 894
 895         icp_native_eoi(d);
 896 }
 897
 898 static int pnv_pci_ioda_msi_setup(struct pnv_phb *phb, struct pci_dev *dev,
 899                                   unsigned int hwirq, unsigned int virq,
 900                                   unsigned int is_64, struct msi_msg *msg)
 901 {
 902         struct pnv_ioda_pe *pe = pnv_ioda_get_pe(dev);
 903         struct pci_dn *pdn = pci_get_pdn(dev);
 904         struct irq_data *idata;
 905         struct irq_chip *ichip;
 906         unsigned int xive_num = hwirq - phb->msi_base;
 907         __be32 data;
 908         int rc;
 909
 910         /* No PE assigned ? bail out ... no MSI for you ! */
 911         if (pe == NULL)
 912                 return -ENXIO;
 913
 914         /* Check if we have an MVE */
 915         if (pe->mve_number < 0)
 916                 return -ENXIO;
 917
 918         /* Force 32-bit MSI on some broken devices */
 919         if (pdn && pdn->force_32bit_msi)
 920                 is_64 = 0;
 921
 922         /* Assign XIVE to PE */
 923         rc = opal_pci_set_xive_pe(phb->opal_id, pe->pe_number, xive_num);
 924         if (rc) {
 925                 pr_warn("%s: OPAL error %d setting XIVE %d PE\n",
 926                         pci_name(dev), rc, xive_num);
 927                 return -EIO;
 928         }
 929
 930         if (is_64) {
 931                 __be64 addr64;
 932
 933                 rc = opal_get_msi_64(phb->opal_id, pe->mve_number, xive_num, 1,
 934                                      &addr64, &data);
 935                 if (rc) {
 936                         pr_warn("%s: OPAL error %d getting 64-bit MSI data\n",
 937                                 pci_name(dev), rc);
 938                         return -EIO;
 939                 }
 940                 msg->address_hi = be64_to_cpu(addr64) >> 32;
 941                 msg->address_lo = be64_to_cpu(addr64) & 0xfffffffful;
 942         } else {
 943                 __be32 addr32;
 944
 945                 rc = opal_get_msi_32(phb->opal_id, pe->mve_number, xive_num, 1,
 946                                      &addr32, &data);
 947                 if (rc) {
 948                         pr_warn("%s: OPAL error %d getting 32-bit MSI data\n",
 949                                 pci_name(dev), rc);
 950                         return -EIO;
 951                 }
 952                 msg->address_hi = 0;
 953                 msg->address_lo = be32_to_cpu(addr32);
 954         }
 955         msg->data = be32_to_cpu(data);
 956
 957         /*
 958          * Change the IRQ chip for the MSI interrupts on PHB3.
 959          * The corresponding IRQ chip should be populated for
 960          * the first time.
 961          */
 962         if (phb->type == PNV_PHB_IODA2) {
 963                 if (!phb->ioda.irq_chip_init) {
 964                         idata = irq_get_irq_data(virq);
 965                         ichip = irq_data_get_irq_chip(idata);
 966                         phb->ioda.irq_chip_init = 1;
 967                         phb->ioda.irq_chip = *ichip;
 968                         phb->ioda.irq_chip.irq_eoi = pnv_ioda2_msi_eoi;
 969                 }
 970
 971                 irq_set_chip(virq, &phb->ioda.irq_chip);
 972         }
 973
 974         pr_devel("%s: %s-bit MSI on hwirq %x (xive #%d),"
 975                  " address=%x_%08x data=%x PE# %d\n",
 976                  pci_name(dev), is_64 ? "64" : "32", hwirq, xive_num,
 977                  msg->address_hi, msg->address_lo, data, pe->pe_number);
 978
 979         return 0;
 980 }
 981
 982 static void pnv_pci_init_ioda_msis(struct pnv_phb *phb)
 983 {
 984         unsigned int count;
 985         const __be32 *prop = of_get_property(phb->hose->dn,
 986                                              "ibm,opal-msi-ranges", NULL);
 987         if (!prop) {
 988                 /* BML Fallback */
 989                 prop = of_get_property(phb->hose->dn, "msi-ranges", NULL);
 990         }
 991         if (!prop)
 992                 return;
 993
 994         phb->msi_base = be32_to_cpup(prop);
 995         count = be32_to_cpup(prop + 1);
 996         if (msi_bitmap_alloc(&phb->msi_bmp, count, phb->hose->dn)) {
 997                 pr_err("PCI %d: Failed to allocate MSI bitmap !\n",
 998                        phb->hose->global_number);
 999                 return;
1000         }
1001
1002         phb->msi_setup = pnv_pci_ioda_msi_setup;
1003         phb->msi32_support = 1;
1004         pr_info("  Allocated bitmap for %d MSIs (base IRQ 0x%x)\n",
1005                 count, phb->msi_base);
1006 }
1007 #else
1008 static void pnv_pci_init_ioda_msis(struct pnv_phb *phb) { }
1009 #endif /* CONFIG_PCI_MSI */
1010
1011 /*
1012  * This function is supposed to be called on basis of PE from top
1013  * to bottom style. So the the I/O or MMIO segment assigned to
1014  * parent PE could be overrided by its child PEs if necessary.
1015  */
1016 static void pnv_ioda_setup_pe_seg(struct pci_controller *hose,
1017                                   struct pnv_ioda_pe *pe)
1018 {
1019         struct pnv_phb *phb = hose->private_data;
1020         struct pci_bus_region region;
1021         struct resource *res;
1022         int i, index;
1023         int rc;
1024
1025         /*
1026          * NOTE: We only care PCI bus based PE for now. For PCI
1027          * device based PE, for example SRIOV sensitive VF should
1028          * be figured out later.
1029          */
1030         BUG_ON(!(pe->flags & (PNV_IODA_PE_BUS | PNV_IODA_PE_BUS_ALL)));
1031
1032         pci_bus_for_each_resource(pe->pbus, res, i) {
1033                 if (!res || !res->flags ||
1034                     res->start > res->end)
1035                         continue;
1036
1037                 if (res->flags & IORESOURCE_IO) {
1038                         region.start = res->start - phb->ioda.io_pci_base;
1039                         region.end   = res->end - phb->ioda.io_pci_base;
1040                         index = region.start / phb->ioda.io_segsize;
1041
1042                         while (index < phb->ioda.total_pe &&
1043                                region.start <= region.end) {
1044                                 phb->ioda.io_segmap[index] = pe->pe_number;
1045                                 rc = opal_pci_map_pe_mmio_window(phb->opal_id,
1046                                         pe->pe_number, OPAL_IO_WINDOW_TYPE, 0, index);
1047                                 if (rc != OPAL_SUCCESS) {
1048                                         pr_err("%s: OPAL error %d when mapping IO "
1049                                                "segment #%d to PE#%d\n",
1050                                                __func__, rc, index, pe->pe_number);
1051                                         break;
1052                                 }
1053
1054                                 region.start += phb->ioda.io_segsize;
1055                                 index++;
1056                         }
1057                 } else if (res->flags & IORESOURCE_MEM) {
1058                         /* WARNING: Assumes M32 is mem region 0 in PHB. We need to
1059                          * harden that algorithm when we start supporting M64
1060                          */
1061                         region.start = res->start -
1062                                        hose->mem_offset[0] -
1063                                        phb->ioda.m32_pci_base;
1064                         region.end   = res->end -
1065                                        hose->mem_offset[0] -
1066                                        phb->ioda.m32_pci_base;
1067                         index = region.start / phb->ioda.m32_segsize;
1068
1069                         while (index < phb->ioda.total_pe &&
1070                                region.start <= region.end) {
1071                                 phb->ioda.m32_segmap[index] = pe->pe_number;
1072                                 rc = opal_pci_map_pe_mmio_window(phb->opal_id,
1073                                         pe->pe_number, OPAL_M32_WINDOW_TYPE, 0, index);
1074                                 if (rc != OPAL_SUCCESS) {
1075                                         pr_err("%s: OPAL error %d when mapping M32 "
1076                                                "segment#%d to PE#%d",
1077                                                __func__, rc, index, pe->pe_number);
1078                                         break;
1079                                 }
1080
1081                                 region.start += phb->ioda.m32_segsize;
1082                                 index++;
1083                         }
1084                 }
1085         }
1086 }
1087
1088 static void pnv_pci_ioda_setup_seg(void)
1089 {
1090         struct pci_controller *tmp, *hose;
1091         struct pnv_phb *phb;
1092         struct pnv_ioda_pe *pe;
1093
1094         list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
1095                 phb = hose->private_data;
1096                 list_for_each_entry(pe, &phb->ioda.pe_list, list) {
1097                         pnv_ioda_setup_pe_seg(hose, pe);
1098                 }
1099         }
1100 }
1101
1102 static void pnv_pci_ioda_setup_DMA(void)
1103 {
1104         struct pci_controller *hose, *tmp;
1105         struct pnv_phb *phb;
1106
1107         list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
1108                 pnv_ioda_setup_dma(hose->private_data);
1109
1110                 /* Mark the PHB initialization done */
1111                 phb = hose->private_data;
1112                 phb->initialized = 1;
1113         }
1114 }
1115
1116 static void pnv_pci_ioda_create_dbgfs(void)
1117 {
1118 #ifdef CONFIG_DEBUG_FS
1119         struct pci_controller *hose, *tmp;
1120         struct pnv_phb *phb;
1121         char name[16];
1122
1123         list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
1124                 phb = hose->private_data;
1125
1126                 sprintf(name, "PCI%04x", hose->global_number);
1127                 phb->dbgfs = debugfs_create_dir(name, powerpc_debugfs_root);
1128                 if (!phb->dbgfs)
1129                         pr_warning("%s: Error on creating debugfs on PHB#%x\n",
1130                                 __func__, hose->global_number);
1131         }
1132 #endif /* CONFIG_DEBUG_FS */
1133 }
1134
1135 static void pnv_pci_ioda_fixup(void)
1136 {
1137         pnv_pci_ioda_setup_PEs();
1138         pnv_pci_ioda_setup_seg();
1139         pnv_pci_ioda_setup_DMA();
1140
1141         pnv_pci_ioda_create_dbgfs();
1142
1143 #ifdef CONFIG_EEH
1144         eeh_probe_mode_set(EEH_PROBE_MODE_DEV);
1145         eeh_addr_cache_build();
1146         eeh_init();
1147 #endif
1148 }
1149
1150 /*
1151  * Returns the alignment for I/O or memory windows for P2P
1152  * bridges. That actually depends on how PEs are segmented.
1153  * For now, we return I/O or M32 segment size for PE sensitive
1154  * P2P bridges. Otherwise, the default values (4KiB for I/O,
1155  * 1MiB for memory) will be returned.
1156  *
1157  * The current PCI bus might be put into one PE, which was
1158  * create against the parent PCI bridge. For that case, we
1159  * needn't enlarge the alignment so that we can save some
1160  * resources.
1161  */
1162 static resource_size_t pnv_pci_window_alignment(struct pci_bus *bus,
1163                                                 unsigned long type)
1164 {
1165         struct pci_dev *bridge;
1166         struct pci_controller *hose = pci_bus_to_host(bus);
1167         struct pnv_phb *phb = hose->private_data;
1168         int num_pci_bridges = 0;
1169
1170         bridge = bus->self;
1171         while (bridge) {
1172                 if (pci_pcie_type(bridge) == PCI_EXP_TYPE_PCI_BRIDGE) {
1173                         num_pci_bridges++;
1174                         if (num_pci_bridges >= 2)
1175                                 return 1;
1176                 }
1177
1178                 bridge = bridge->bus->self;
1179         }
1180
1181         /* We need support prefetchable memory window later */
1182         if (type & IORESOURCE_MEM)
1183                 return phb->ioda.m32_segsize;
1184
1185         return phb->ioda.io_segsize;
1186 }
1187
1188 /* Prevent enabling devices for which we couldn't properly
1189  * assign a PE
1190  */
1191 static int pnv_pci_enable_device_hook(struct pci_dev *dev)
1192 {
1193         struct pci_controller *hose = pci_bus_to_host(dev->bus);
1194         struct pnv_phb *phb = hose->private_data;
1195         struct pci_dn *pdn;
1196
1197         /* The function is probably called while the PEs have
1198          * not be created yet. For example, resource reassignment
1199          * during PCI probe period. We just skip the check if
1200          * PEs isn't ready.
1201          */
1202         if (!phb->initialized)
1203                 return 0;
1204
1205         pdn = pci_get_pdn(dev);
1206         if (!pdn || pdn->pe_number == IODA_INVALID_PE)
1207                 return -EINVAL;
1208
1209         return 0;
1210 }
1211
1212 static u32 pnv_ioda_bdfn_to_pe(struct pnv_phb *phb, struct pci_bus *bus,
1213                                u32 devfn)
1214 {
1215         return phb->ioda.pe_rmap[(bus->number << 8) | devfn];
1216 }
1217
1218 static void pnv_pci_ioda_shutdown(struct pnv_phb *phb)
1219 {
1220         opal_pci_reset(phb->opal_id, OPAL_PCI_IODA_TABLE_RESET,
1221                        OPAL_ASSERT_RESET);
1222 }
1223
1224 void __init pnv_pci_init_ioda_phb(struct device_node *np,
1225                                   u64 hub_id, int ioda_type)
1226 {
1227         struct pci_controller *hose;
1228         struct pnv_phb *phb;
1229         unsigned long size, m32map_off, pemap_off, iomap_off = 0;
1230         const __be64 *prop64;
1231         const __be32 *prop32;
1232         int len;
1233         u64 phb_id;
1234         void *aux;
1235         long rc;
1236
1237         pr_info("Initializing IODA%d OPAL PHB %s\n", ioda_type, np->full_name);
1238
1239         prop64 = of_get_property(np, "ibm,opal-phbid", NULL);
1240         if (!prop64) {
1241                 pr_err("  Missing \"ibm,opal-phbid\" property !\n");
1242                 return;
1243         }
1244         phb_id = be64_to_cpup(prop64);
1245         pr_debug("  PHB-ID  : 0x%016llx\n", phb_id);
1246
1247         phb = alloc_bootmem(sizeof(struct pnv_phb));
1248         if (!phb) {
1249                 pr_err("  Out of memory !\n");
1250                 return;
1251         }
1252
1253         /* Allocate PCI controller */
1254         memset(phb, 0, sizeof(struct pnv_phb));
1255         phb->hose = hose = pcibios_alloc_controller(np);
1256         if (!phb->hose) {
1257                 pr_err("  Can't allocate PCI controller for %s\n",
1258                        np->full_name);
1259                 free_bootmem((unsigned long)phb, sizeof(struct pnv_phb));
1260                 return;
1261         }
1262
1263         spin_lock_init(&phb->lock);
1264         prop32 = of_get_property(np, "bus-range", &len);
1265         if (prop32 && len == 8) {
1266                 hose->first_busno = be32_to_cpu(prop32[0]);
1267                 hose->last_busno = be32_to_cpu(prop32[1]);
1268         } else {
1269                 pr_warn("  Broken <bus-range> on %s\n", np->full_name);
1270                 hose->first_busno = 0;
1271                 hose->last_busno = 0xff;
1272         }
1273         hose->private_data = phb;
1274         phb->hub_id = hub_id;
1275         phb->opal_id = phb_id;
1276         phb->type = ioda_type;
1277
1278         /* Detect specific models for error handling */
1279         if (of_device_is_compatible(np, "ibm,p7ioc-pciex"))
1280                 phb->model = PNV_PHB_MODEL_P7IOC;
1281         else if (of_device_is_compatible(np, "ibm,power8-pciex"))
1282                 phb->model = PNV_PHB_MODEL_PHB3;
1283         else
1284                 phb->model = PNV_PHB_MODEL_UNKNOWN;
1285
1286         /* Parse 32-bit and IO ranges (if any) */
1287         pci_process_bridge_OF_ranges(hose, np, !hose->global_number);
1288
1289         /* Get registers */
1290         phb->regs = of_iomap(np, 0);
1291         if (phb->regs == NULL)
1292                 pr_err("  Failed to map registers !\n");
1293
1294         /* Initialize more IODA stuff */
1295         phb->ioda.total_pe = 1;
1296         prop32 = of_get_property(np, "ibm,opal-num-pes", NULL);
1297         if (prop32)
1298                 phb->ioda.total_pe = be32_to_cpup(prop32);
1299         prop32 = of_get_property(np, "ibm,opal-reserved-pe", NULL);
1300         if (prop32)
1301                 phb->ioda.reserved_pe = be32_to_cpup(prop32);
1302         phb->ioda.m32_size = resource_size(&hose->mem_resources[0]);
1303         /* FW Has already off top 64k of M32 space (MSI space) */
1304         phb->ioda.m32_size += 0x10000;
1305
1306         phb->ioda.m32_segsize = phb->ioda.m32_size / phb->ioda.total_pe;
1307         phb->ioda.m32_pci_base = hose->mem_resources[0].start - hose->mem_offset[0];
1308         phb->ioda.io_size = hose->pci_io_size;
1309         phb->ioda.io_segsize = phb->ioda.io_size / phb->ioda.total_pe;
1310         phb->ioda.io_pci_base = 0; /* XXX calculate this ? */
1311
1312         /* Allocate aux data & arrays. We don't have IO ports on PHB3 */
1313         size = _ALIGN_UP(phb->ioda.total_pe / 8, sizeof(unsigned long));
1314         m32map_off = size;
1315         size += phb->ioda.total_pe * sizeof(phb->ioda.m32_segmap[0]);
1316         if (phb->type == PNV_PHB_IODA1) {
1317                 iomap_off = size;
1318                 size += phb->ioda.total_pe * sizeof(phb->ioda.io_segmap[0]);
1319         }
1320         pemap_off = size;
1321         size += phb->ioda.total_pe * sizeof(struct pnv_ioda_pe);
1322         aux = alloc_bootmem(size);
1323         memset(aux, 0, size);
1324         phb->ioda.pe_alloc = aux;
1325         phb->ioda.m32_segmap = aux + m32map_off;
1326         if (phb->type == PNV_PHB_IODA1)
1327                 phb->ioda.io_segmap = aux + iomap_off;
1328         phb->ioda.pe_array = aux + pemap_off;
1329         set_bit(phb->ioda.reserved_pe, phb->ioda.pe_alloc);
1330
1331         INIT_LIST_HEAD(&phb->ioda.pe_dma_list);
1332         INIT_LIST_HEAD(&phb->ioda.pe_list);
1333
1334         /* Calculate how many 32-bit TCE segments we have */
1335         phb->ioda.tce32_count = phb->ioda.m32_pci_base >> 28;
1336
1337         /* Clear unusable m64 */
1338         hose->mem_resources[1].flags = 0;
1339         hose->mem_resources[1].start = 0;
1340         hose->mem_resources[1].end = 0;
1341         hose->mem_resources[2].flags = 0;
1342         hose->mem_resources[2].start = 0;
1343         hose->mem_resources[2].end = 0;
1344
1345 #if 0 /* We should really do that ... */
1346         rc = opal_pci_set_phb_mem_window(opal->phb_id,
1347                                          window_type,
1348                                          window_num,
1349                                          starting_real_address,
1350                                          starting_pci_address,
1351                                          segment_size);
1352 #endif
1353
1354         pr_info("  %d (%d) PE's M32: 0x%x [segment=0x%x]"
1355                 " IO: 0x%x [segment=0x%x]\n",
1356                 phb->ioda.total_pe,
1357                 phb->ioda.reserved_pe,
1358                 phb->ioda.m32_size, phb->ioda.m32_segsize,
1359                 phb->ioda.io_size, phb->ioda.io_segsize);
1360
1361         phb->hose->ops = &pnv_pci_ops;
1362 #ifdef CONFIG_EEH
1363         phb->eeh_ops = &ioda_eeh_ops;
1364 #endif
1365
1366         /* Setup RID -> PE mapping function */
1367         phb->bdfn_to_pe = pnv_ioda_bdfn_to_pe;
1368
1369         /* Setup TCEs */
1370         phb->dma_dev_setup = pnv_pci_ioda_dma_dev_setup;
1371         phb->dma_set_mask = pnv_pci_ioda_dma_set_mask;
1372
1373         /* Setup shutdown function for kexec */
1374         phb->shutdown = pnv_pci_ioda_shutdown;
1375
1376         /* Setup MSI support */
1377         pnv_pci_init_ioda_msis(phb);
1378
1379         /*
1380          * We pass the PCI probe flag PCI_REASSIGN_ALL_RSRC here
1381          * to let the PCI core do resource assignment. It's supposed
1382          * that the PCI core will do correct I/O and MMIO alignment
1383          * for the P2P bridge bars so that each PCI bus (excluding
1384          * the child P2P bridges) can form individual PE.
1385          */
1386         ppc_md.pcibios_fixup = pnv_pci_ioda_fixup;
1387         ppc_md.pcibios_enable_device_hook = pnv_pci_enable_device_hook;
1388         ppc_md.pcibios_window_alignment = pnv_pci_window_alignment;
1389         pci_add_flags(PCI_REASSIGN_ALL_RSRC);
1390
1391         /* Reset IODA tables to a clean state */
1392         rc = opal_pci_reset(phb_id, OPAL_PCI_IODA_TABLE_RESET, OPAL_ASSERT_RESET);
1393         if (rc)
1394                 pr_warning("  OPAL Error %ld performing IODA table reset !\n", rc);
1395 }
1396
1397 void __init pnv_pci_init_ioda2_phb(struct device_node *np)
1398 {
1399         pnv_pci_init_ioda_phb(np, 0, PNV_PHB_IODA2);
1400 }
1401
1402 void __init pnv_pci_init_ioda_hub(struct device_node *np)
1403 {
1404         struct device_node *phbn;
1405         const __be64 *prop64;
1406         u64 hub_id;
1407
1408         pr_info("Probing IODA IO-Hub %s\n", np->full_name);
1409
1410         prop64 = of_get_property(np, "ibm,opal-hubid", NULL);
1411         if (!prop64) {
1412                 pr_err(" Missing \"ibm,opal-hubid\" property !\n");
1413                 return;
1414         }
1415         hub_id = be64_to_cpup(prop64);
1416         pr_devel(" HUB-ID : 0x%016llx\n", hub_id);
1417
1418         /* Count child PHBs */
1419         for_each_child_of_node(np, phbn) {
1420                 /* Look for IODA1 PHBs */
1421                 if (of_device_is_compatible(phbn, "ibm,ioda-phb"))
1422                         pnv_pci_init_ioda_phb(phbn, hub_id, PNV_PHB_IODA1);
1423         }
1424 }