[POWERPC] 85xx: Add quirk to ignore bogus FPGA on CDS
[pandora-kernel.git] / arch / powerpc / platforms / 85xx / mpc85xx_cds.c
1 /*
2  * MPC85xx setup and early boot code plus other random bits.
3  *
4  * Maintained by Kumar Gala (see MAINTAINERS for contact information)
5  *
6  * Copyright 2005 Freescale Semiconductor Inc.
7  *
8  * This program is free software; you can redistribute  it and/or modify it
9  * under  the terms of  the GNU General  Public License as published by the
10  * Free Software Foundation;  either version 2 of the  License, or (at your
11  * option) any later version.
12  */
13
14 #include <linux/stddef.h>
15 #include <linux/kernel.h>
16 #include <linux/init.h>
17 #include <linux/errno.h>
18 #include <linux/reboot.h>
19 #include <linux/pci.h>
20 #include <linux/kdev_t.h>
21 #include <linux/major.h>
22 #include <linux/console.h>
23 #include <linux/delay.h>
24 #include <linux/seq_file.h>
25 #include <linux/initrd.h>
26 #include <linux/module.h>
27 #include <linux/fsl_devices.h>
28
29 #include <asm/system.h>
30 #include <asm/pgtable.h>
31 #include <asm/page.h>
32 #include <asm/atomic.h>
33 #include <asm/time.h>
34 #include <asm/io.h>
35 #include <asm/machdep.h>
36 #include <asm/ipic.h>
37 #include <asm/bootinfo.h>
38 #include <asm/pci-bridge.h>
39 #include <asm/mpc85xx.h>
40 #include <asm/irq.h>
41 #include <mm/mmu_decl.h>
42 #include <asm/prom.h>
43 #include <asm/udbg.h>
44 #include <asm/mpic.h>
45 #include <asm/i8259.h>
46
47 #include <sysdev/fsl_soc.h>
48 #include <sysdev/fsl_pci.h>
49 #include "mpc85xx.h"
50
51 static int cds_pci_slot = 2;
52 static volatile u8 *cadmus;
53
54 #ifdef CONFIG_PCI
55
56 #define ARCADIA_HOST_BRIDGE_IDSEL       17
57 #define ARCADIA_2ND_BRIDGE_IDSEL        3
58
59 static int mpc85xx_exclude_device(struct pci_controller *hose,
60                                   u_char bus, u_char devfn)
61 {
62         /* We explicitly do not go past the Tundra 320 Bridge */
63         if ((bus == 1) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL))
64                 return PCIBIOS_DEVICE_NOT_FOUND;
65         if ((bus == 0) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL))
66                 return PCIBIOS_DEVICE_NOT_FOUND;
67         else
68                 return PCIBIOS_SUCCESSFUL;
69 }
70
71 static void __init mpc85xx_cds_pci_irq_fixup(struct pci_dev *dev)
72 {
73         u_char c;
74         if (dev->vendor == PCI_VENDOR_ID_VIA) {
75                 switch (dev->device) {
76                 case PCI_DEVICE_ID_VIA_82C586_1:
77                         /*
78                          * U-Boot does not set the enable bits
79                          * for the IDE device. Force them on here.
80                          */
81                         pci_read_config_byte(dev, 0x40, &c);
82                         c |= 0x03; /* IDE: Chip Enable Bits */
83                         pci_write_config_byte(dev, 0x40, c);
84
85                         /*
86                          * Since only primary interface works, force the
87                          * IDE function to standard primary IDE interrupt
88                          * w/ 8259 offset
89                          */
90                         dev->irq = 14;
91                         pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
92                         break;
93                 /*
94                  * Force legacy USB interrupt routing
95                  */
96                 case PCI_DEVICE_ID_VIA_82C586_2:
97                 /* There are two USB controllers.
98                  * Identify them by functon number
99                  */
100                         if (PCI_FUNC(dev->devfn))
101                                 dev->irq = 11;
102                         else
103                                 dev->irq = 10;
104                         pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
105                 default:
106                         break;
107                 }
108         }
109 }
110
111 static void __devinit skip_fake_bridge(struct pci_dev *dev)
112 {
113         /* Make it an error to skip the fake bridge
114          * in pci_setup_device() in probe.c */
115         dev->hdr_type = 0x7f;
116 }
117 DECLARE_PCI_FIXUP_EARLY(0x1957, 0x3fff, skip_fake_bridge);
118 DECLARE_PCI_FIXUP_EARLY(0x3fff, 0x1957, skip_fake_bridge);
119 DECLARE_PCI_FIXUP_EARLY(0xff3f, 0x5719, skip_fake_bridge);
120
121 #ifdef CONFIG_PPC_I8259
122 #warning The i8259 PIC support is currently broken
123 static void mpc85xx_8259_cascade(unsigned int irq, struct irq_desc *desc)
124 {
125         unsigned int cascade_irq = i8259_irq();
126
127         if (cascade_irq != NO_IRQ)
128                 generic_handle_irq(cascade_irq);
129
130         desc->chip->eoi(irq);
131 }
132 #endif /* PPC_I8259 */
133 #endif /* CONFIG_PCI */
134
135 static void __init mpc85xx_cds_pic_init(void)
136 {
137         struct mpic *mpic;
138         struct resource r;
139         struct device_node *np = NULL;
140 #ifdef CONFIG_PPC_I8259
141         struct device_node *cascade_node = NULL;
142         int cascade_irq;
143 #endif
144
145         np = of_find_node_by_type(np, "open-pic");
146
147         if (np == NULL) {
148                 printk(KERN_ERR "Could not find open-pic node\n");
149                 return;
150         }
151
152         if (of_address_to_resource(np, 0, &r)) {
153                 printk(KERN_ERR "Failed to map mpic register space\n");
154                 of_node_put(np);
155                 return;
156         }
157
158         mpic = mpic_alloc(np, r.start,
159                         MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
160                         0, 256, " OpenPIC  ");
161         BUG_ON(mpic == NULL);
162
163         /* Return the mpic node */
164         of_node_put(np);
165
166         mpic_init(mpic);
167
168 #ifdef CONFIG_PPC_I8259
169         /* Initialize the i8259 controller */
170         for_each_node_by_type(np, "interrupt-controller")
171                 if (of_device_is_compatible(np, "chrp,iic")) {
172                         cascade_node = np;
173                         break;
174                 }
175
176         if (cascade_node == NULL) {
177                 printk(KERN_DEBUG "Could not find i8259 PIC\n");
178                 return;
179         }
180
181         cascade_irq = irq_of_parse_and_map(cascade_node, 0);
182         if (cascade_irq == NO_IRQ) {
183                 printk(KERN_ERR "Failed to map cascade interrupt\n");
184                 return;
185         }
186
187         i8259_init(cascade_node, 0);
188         of_node_put(cascade_node);
189
190         set_irq_chained_handler(cascade_irq, mpc85xx_8259_cascade);
191 #endif /* CONFIG_PPC_I8259 */
192 }
193
194 /*
195  * Setup the architecture
196  */
197 static void __init mpc85xx_cds_setup_arch(void)
198 {
199         struct device_node *cpu;
200 #ifdef CONFIG_PCI
201         struct device_node *np;
202 #endif
203
204         if (ppc_md.progress)
205                 ppc_md.progress("mpc85xx_cds_setup_arch()", 0);
206
207         cpu = of_find_node_by_type(NULL, "cpu");
208         if (cpu != 0) {
209                 const unsigned int *fp;
210
211                 fp = of_get_property(cpu, "clock-frequency", NULL);
212                 if (fp != 0)
213                         loops_per_jiffy = *fp / HZ;
214                 else
215                         loops_per_jiffy = 500000000 / HZ;
216                 of_node_put(cpu);
217         }
218
219         cadmus = ioremap(CADMUS_BASE, CADMUS_SIZE);
220         cds_pci_slot = ((cadmus[CM_CSR] >> 6) & 0x3) + 1;
221
222         if (ppc_md.progress) {
223                 char buf[40];
224                 snprintf(buf, 40, "CDS Version = 0x%x in slot %d\n",
225                                 cadmus[CM_VER], cds_pci_slot);
226                 ppc_md.progress(buf, 0);
227         }
228
229 #ifdef CONFIG_PCI
230         for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) {
231                 struct resource rsrc;
232                 of_address_to_resource(np, 0, &rsrc);
233                 if ((rsrc.start & 0xfffff) == 0x9000)
234                         fsl_add_bridge(np, 0);
235                 else
236                         fsl_add_bridge(np, 1);
237         }
238         ppc_md.pci_irq_fixup = mpc85xx_cds_pci_irq_fixup;
239         ppc_md.pci_exclude_device = mpc85xx_exclude_device;
240 #endif
241 }
242
243 static void mpc85xx_cds_show_cpuinfo(struct seq_file *m)
244 {
245         uint pvid, svid, phid1;
246         uint memsize = total_memory;
247
248         pvid = mfspr(SPRN_PVR);
249         svid = mfspr(SPRN_SVR);
250
251         seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n");
252         seq_printf(m, "Machine\t\t: MPC85xx CDS (0x%x)\n", cadmus[CM_VER]);
253         seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
254         seq_printf(m, "SVR\t\t: 0x%x\n", svid);
255
256         /* Display cpu Pll setting */
257         phid1 = mfspr(SPRN_HID1);
258         seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
259
260         /* Display the amount of memory */
261         seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
262 }
263
264
265 /*
266  * Called very early, device-tree isn't unflattened
267  */
268 static int __init mpc85xx_cds_probe(void)
269 {
270         unsigned long root = of_get_flat_dt_root();
271
272         return of_flat_dt_is_compatible(root, "MPC85xxCDS");
273 }
274
275 define_machine(mpc85xx_cds) {
276         .name           = "MPC85xx CDS",
277         .probe          = mpc85xx_cds_probe,
278         .setup_arch     = mpc85xx_cds_setup_arch,
279         .init_IRQ       = mpc85xx_cds_pic_init,
280         .show_cpuinfo   = mpc85xx_cds_show_cpuinfo,
281         .get_irq        = mpic_get_irq,
282         .restart        = mpc85xx_restart,
283         .calibrate_decr = generic_calibrate_decr,
284         .progress       = udbg_progress,
285         .pcibios_fixup_bus      = fsl_pcibios_fixup_bus,
286 };