arch/powerpc/boot/dts/mpc8568mds.dts

   1 /*
   2  * MPC8568E MDS Device Tree Source
   3  *
   4  * Copyright 2007 Freescale Semiconductor Inc.
   5  *
   6  * This program is free software; you can redistribute  it and/or modify it
   7  * under  the terms of  the GNU General  Public License as published by the
   8  * Free Software Foundation;  either version 2 of the  License, or (at your
   9  * option) any later version.
  10  */
  11
  12
  13 /*
  14 /memreserve/    00000000 1000000;
  15 */
  16
  17 / {
  18         model = "MPC8568EMDS";
  19         compatible = "MPC8568EMDS", "MPC85xxMDS";
  20         #address-cells = <1>;
  21         #size-cells = <1>;
  22
  23         cpus {
  24                 #address-cells = <1>;
  25                 #size-cells = <0>;
  26
  27                 PowerPC,8568@0 {
  28                         device_type = "cpu";
  29                         reg = <0>;
  30                         d-cache-line-size = <20>;       // 32 bytes
  31                         i-cache-line-size = <20>;       // 32 bytes
  32                         d-cache-size = <8000>;          // L1, 32K
  33                         i-cache-size = <8000>;          // L1, 32K
  34                         timebase-frequency = <0>;
  35                         bus-frequency = <0>;
  36                         clock-frequency = <0>;
  37                         32-bit;
  38                 };
  39         };
  40
  41         memory {
  42                 device_type = "memory";
  43                 reg = <00000000 10000000>;
  44         };
  45
  46         bcsr@f8000000 {
  47                 device_type = "board-control";
  48                 reg = <f8000000 8000>;
  49         };
  50
  51         soc8568@e0000000 {
  52                 #address-cells = <1>;
  53                 #size-cells = <1>;
  54                 #interrupt-cells = <2>;
  55                 device_type = "soc";
  56                 ranges = <0 e0000000 00100000>;
  57                 reg = <e0000000 00100000>;
  58                 bus-frequency = <0>;
  59
  60                 memory-controller@2000 {
  61                         compatible = "fsl,8568-memory-controller";
  62                         reg = <2000 1000>;
  63                         interrupt-parent = <&mpic>;
  64                         interrupts = <12 2>;
  65                 };
  66
  67                 l2-cache-controller@20000 {
  68                         compatible = "fsl,8568-l2-cache-controller";
  69                         reg = <20000 1000>;
  70                         cache-line-size = <20>; // 32 bytes
  71                         cache-size = <80000>;   // L2, 512K
  72                         interrupt-parent = <&mpic>;
  73                         interrupts = <10 2>;
  74                 };
  75
  76                 i2c@3000 {
  77                         device_type = "i2c";
  78                         compatible = "fsl-i2c";
  79                         reg = <3000 100>;
  80                         interrupts = <2b 2>;
  81                         interrupt-parent = <&mpic>;
  82                         dfsrr;
  83                 };
  84
  85                 i2c@3100 {
  86                         device_type = "i2c";
  87                         compatible = "fsl-i2c";
  88                         reg = <3100 100>;
  89                         interrupts = <2b 2>;
  90                         interrupt-parent = <&mpic>;
  91                         dfsrr;
  92                 };
  93
  94                 mdio@24520 {
  95                         #address-cells = <1>;
  96                         #size-cells = <0>;
  97                         device_type = "mdio";
  98                         compatible = "gianfar";
  99                         reg = <24520 20>;
 100                         phy0: ethernet-phy@0 {
 101                                 interrupt-parent = <&mpic>;
 102                                 interrupts = <1 1>;
 103                                 reg = <0>;
 104                                 device_type = "ethernet-phy";
 105                         };
 106                         phy1: ethernet-phy@1 {
 107                                 interrupt-parent = <&mpic>;
 108                                 interrupts = <2 1>;
 109                                 reg = <1>;
 110                                 device_type = "ethernet-phy";
 111                         };
 112                         phy2: ethernet-phy@2 {
 113                                 interrupt-parent = <&mpic>;
 114                                 interrupts = <1 1>;
 115                                 reg = <2>;
 116                                 device_type = "ethernet-phy";
 117                         };
 118                         phy3: ethernet-phy@3 {
 119                                 interrupt-parent = <&mpic>;
 120                                 interrupts = <2 1>;
 121                                 reg = <3>;
 122                                 device_type = "ethernet-phy";
 123                         };
 124                 };
 125
 126                 ethernet@24000 {
 127                         #address-cells = <1>;
 128                         #size-cells = <0>;
 129                         device_type = "network";
 130                         model = "eTSEC";
 131                         compatible = "gianfar";
 132                         reg = <24000 1000>;
 133                         /*
 134                          * mac-address is deprecated and will be removed
 135                          * in 2.6.25.  Only recent versions of
 136                          * U-Boot support local-mac-address, however.
 137                          */
 138                         mac-address = [ 00 00 00 00 00 00 ];
 139                         local-mac-address = [ 00 00 00 00 00 00 ];
 140                         interrupts = <1d 2 1e 2 22 2>;
 141                         interrupt-parent = <&mpic>;
 142                         phy-handle = <&phy2>;
 143                 };
 144
 145                 ethernet@25000 {
 146                         #address-cells = <1>;
 147                         #size-cells = <0>;
 148                         device_type = "network";
 149                         model = "eTSEC";
 150                         compatible = "gianfar";
 151                         reg = <25000 1000>;
 152                         /*
 153                          * mac-address is deprecated and will be removed
 154                          * in 2.6.25.  Only recent versions of
 155                          * U-Boot support local-mac-address, however.
 156                          */
 157                         mac-address = [ 00 00 00 00 00 00 ];
 158                         local-mac-address = [ 00 00 00 00 00 00 ];
 159                         interrupts = <23 2 24 2 28 2>;
 160                         interrupt-parent = <&mpic>;
 161                         phy-handle = <&phy3>;
 162                 };
 163
 164                 serial@4500 {
 165                         device_type = "serial";
 166                         compatible = "ns16550";
 167                         reg = <4500 100>;
 168                         clock-frequency = <0>;
 169                         interrupts = <2a 2>;
 170                         interrupt-parent = <&mpic>;
 171                 };
 172
 173                 global-utilities@e0000 {        //global utilities block
 174                         compatible = "fsl,mpc8548-guts";
 175                         reg = <e0000 1000>;
 176                         fsl,has-rstcr;
 177                 };
 178
 179                 pci@8000 {
 180                         interrupt-map-mask = <f800 0 0 7>;
 181                         interrupt-map = <
 182                                 /* IDSEL 0x12 AD18 */
 183                                 9000 0 0 1 &mpic 5 1
 184                                 9000 0 0 2 &mpic 6 1
 185                                 9000 0 0 3 &mpic 7 1
 186                                 9000 0 0 4 &mpic 4 1
 187
 188                                 /* IDSEL 0x13 AD19 */
 189                                 9800 0 0 1 &mpic 6 1
 190                                 9800 0 0 2 &mpic 7 1
 191                                 9800 0 0 3 &mpic 4 1
 192                                 9800 0 0 4 &mpic 5 1>;
 193
 194                         interrupt-parent = <&mpic>;
 195                         interrupts = <18 2>;
 196                         bus-range = <0 ff>;
 197                         ranges = <02000000 0 80000000 80000000 0 20000000
 198                                   01000000 0 00000000 e2000000 0 00800000>;
 199                         clock-frequency = <3f940aa>;
 200                         #interrupt-cells = <1>;
 201                         #size-cells = <2>;
 202                         #address-cells = <3>;
 203                         reg = <8000 1000>;
 204                         compatible = "fsl,mpc8540-pci";
 205                         device_type = "pci";
 206                 };
 207
 208                 /* PCI Express */
 209                 pcie@a000 {
 210                         interrupt-map-mask = <f800 0 0 7>;
 211                         interrupt-map = <
 212
 213                                 /* IDSEL 0x0 (PEX) */
 214                                 00000 0 0 1 &mpic 0 1
 215                                 00000 0 0 2 &mpic 1 1
 216                                 00000 0 0 3 &mpic 2 1
 217                                 00000 0 0 4 &mpic 3 1>;
 218
 219                         interrupt-parent = <&mpic>;
 220                         interrupts = <1a 2>;
 221                         bus-range = <0 ff>;
 222                         ranges = <02000000 0 a0000000 a0000000 0 20000000
 223                                   01000000 0 00000000 e3000000 0 08000000>;
 224                         clock-frequency = <1fca055>;
 225                         #interrupt-cells = <1>;
 226                         #size-cells = <2>;
 227                         #address-cells = <3>;
 228                         reg = <a000 1000>;
 229                         compatible = "fsl,mpc8548-pcie";
 230                         device_type = "pci";
 231                 };
 232
 233                 serial@4600 {
 234                         device_type = "serial";
 235                         compatible = "ns16550";
 236                         reg = <4600 100>;
 237                         clock-frequency = <0>;
 238                         interrupts = <2a 2>;
 239                         interrupt-parent = <&mpic>;
 240                 };
 241
 242                 crypto@30000 {
 243                         device_type = "crypto";
 244                         model = "SEC2";
 245                         compatible = "talitos";
 246                         reg = <30000 f000>;
 247                         interrupts = <2d 2>;
 248                         interrupt-parent = <&mpic>;
 249                         num-channels = <4>;
 250                         channel-fifo-len = <18>;
 251                         exec-units-mask = <000000fe>;
 252                         descriptor-types-mask = <012b0ebf>;
 253                 };
 254
 255                 mpic: pic@40000 {
 256                         clock-frequency = <0>;
 257                         interrupt-controller;
 258                         #address-cells = <0>;
 259                         #interrupt-cells = <2>;
 260                         reg = <40000 40000>;
 261                         built-in;
 262                         compatible = "chrp,open-pic";
 263                         device_type = "open-pic";
 264                         big-endian;
 265                 };
 266                 par_io@e0100 {
 267                         reg = <e0100 100>;
 268                         device_type = "par_io";
 269                         num-ports = <7>;
 270
 271                         pio1: ucc_pin@01 {
 272                                 pio-map = <
 273                         /* port  pin  dir  open_drain  assignment  has_irq */
 274                                         4  0a  1  0  2  0       /* TxD0 */
 275                                         4  09  1  0  2  0       /* TxD1 */
 276                                         4  08  1  0  2  0       /* TxD2 */
 277                                         4  07  1  0  2  0       /* TxD3 */
 278                                         4  17  1  0  2  0       /* TxD4 */
 279                                         4  16  1  0  2  0       /* TxD5 */
 280                                         4  15  1  0  2  0       /* TxD6 */
 281                                         4  14  1  0  2  0       /* TxD7 */
 282                                         4  0f  2  0  2  0       /* RxD0 */
 283                                         4  0e  2  0  2  0       /* RxD1 */
 284                                         4  0d  2  0  2  0       /* RxD2 */
 285                                         4  0c  2  0  2  0       /* RxD3 */
 286                                         4  1d  2  0  2  0       /* RxD4 */
 287                                         4  1c  2  0  2  0       /* RxD5 */
 288                                         4  1b  2  0  2  0       /* RxD6 */
 289                                         4  1a  2  0  2  0       /* RxD7 */
 290                                         4  0b  1  0  2  0       /* TX_EN */
 291                                         4  18  1  0  2  0       /* TX_ER */
 292                                         4  0f  2  0  2  0       /* RX_DV */
 293                                         4  1e  2  0  2  0       /* RX_ER */
 294                                         4  11  2  0  2  0       /* RX_CLK */
 295                                         4  13  1  0  2  0       /* GTX_CLK */
 296                                         1  1f  2  0  3  0>;     /* GTX125 */
 297                         };
 298                         pio2: ucc_pin@02 {
 299                                 pio-map = <
 300                         /* port  pin  dir  open_drain  assignment  has_irq */
 301                                         5  0a 1  0  2  0   /* TxD0 */
 302                                         5  09 1  0  2  0   /* TxD1 */
 303                                         5  08 1  0  2  0   /* TxD2 */
 304                                         5  07 1  0  2  0   /* TxD3 */
 305                                         5  17 1  0  2  0   /* TxD4 */
 306                                         5  16 1  0  2  0   /* TxD5 */
 307                                         5  15 1  0  2  0   /* TxD6 */
 308                                         5  14 1  0  2  0   /* TxD7 */
 309                                         5  0f 2  0  2  0   /* RxD0 */
 310                                         5  0e 2  0  2  0   /* RxD1 */
 311                                         5  0d 2  0  2  0   /* RxD2 */
 312                                         5  0c 2  0  2  0   /* RxD3 */
 313                                         5  1d 2  0  2  0   /* RxD4 */
 314                                         5  1c 2  0  2  0   /* RxD5 */
 315                                         5  1b 2  0  2  0   /* RxD6 */
 316                                         5  1a 2  0  2  0   /* RxD7 */
 317                                         5  0b 1  0  2  0   /* TX_EN */
 318                                         5  18 1  0  2  0   /* TX_ER */
 319                                         5  10 2  0  2  0   /* RX_DV */
 320                                         5  1e 2  0  2  0   /* RX_ER */
 321                                         5  11 2  0  2  0   /* RX_CLK */
 322                                         5  13 1  0  2  0   /* GTX_CLK */
 323                                         1  1f 2  0  3  0   /* GTX125 */
 324                                         4  06 3  0  2  0   /* MDIO */
 325                                         4  05 1  0  2  0>; /* MDC */
 326                         };
 327                 };
 328         };
 329
 330         qe@e0080000 {
 331                 #address-cells = <1>;
 332                 #size-cells = <1>;
 333                 device_type = "qe";
 334                 model = "QE";
 335                 ranges = <0 e0080000 00040000>;
 336                 reg = <e0080000 480>;
 337                 brg-frequency = <0>;
 338                 bus-frequency = <179A7B00>;
 339
 340                 muram@10000 {
 341                         device_type = "muram";
 342                         ranges = <0 00010000 0000c000>;
 343
 344                         data-only@0{
 345                                 reg = <0 c000>;
 346                         };
 347                 };
 348
 349                 spi@4c0 {
 350                         device_type = "spi";
 351                         compatible = "fsl_spi";
 352                         reg = <4c0 40>;
 353                         interrupts = <2>;
 354                         interrupt-parent = <&qeic>;
 355                         mode = "cpu";
 356                 };
 357
 358                 spi@500 {
 359                         device_type = "spi";
 360                         compatible = "fsl_spi";
 361                         reg = <500 40>;
 362                         interrupts = <1>;
 363                         interrupt-parent = <&qeic>;
 364                         mode = "cpu";
 365                 };
 366
 367                 ucc@2000 {
 368                         device_type = "network";
 369                         compatible = "ucc_geth";
 370                         model = "UCC";
 371                         device-id = <1>;
 372                         reg = <2000 200>;
 373                         interrupts = <20>;
 374                         interrupt-parent = <&qeic>;
 375                         /*
 376                          * mac-address is deprecated and will be removed
 377                          * in 2.6.25.  Only recent versions of
 378                          * U-Boot support local-mac-address, however.
 379                          */
 380                         mac-address = [ 00 00 00 00 00 00 ];
 381                         local-mac-address = [ 00 00 00 00 00 00 ];
 382                         rx-clock = <0>;
 383                         tx-clock = <19>;
 384                         phy-handle = <&qe_phy0>;
 385                         phy-connection-type = "gmii";
 386                         pio-handle = <&pio1>;
 387                 };
 388
 389                 ucc@3000 {
 390                         device_type = "network";
 391                         compatible = "ucc_geth";
 392                         model = "UCC";
 393                         device-id = <2>;
 394                         reg = <3000 200>;
 395                         interrupts = <21>;
 396                         interrupt-parent = <&qeic>;
 397                         /*
 398                          * mac-address is deprecated and will be removed
 399                          * in 2.6.25.  Only recent versions of
 400                          * U-Boot support local-mac-address, however.
 401                          */
 402                         mac-address = [ 00 00 00 00 00 00 ];
 403                         local-mac-address = [ 00 00 00 00 00 00 ];
 404                         rx-clock = <0>;
 405                         tx-clock = <14>;
 406                         phy-handle = <&qe_phy1>;
 407                         phy-connection-type = "gmii";
 408                         pio-handle = <&pio2>;
 409                 };
 410
 411                 mdio@2120 {
 412                         #address-cells = <1>;
 413                         #size-cells = <0>;
 414                         reg = <2120 18>;
 415                         device_type = "mdio";
 416                         compatible = "ucc_geth_phy";
 417
 418                         /* These are the same PHYs as on
 419                          * gianfar's MDIO bus */
 420                         qe_phy0: ethernet-phy@00 {
 421                                 interrupt-parent = <&mpic>;
 422                                 interrupts = <1 1>;
 423                                 reg = <0>;
 424                                 device_type = "ethernet-phy";
 425                         };
 426                         qe_phy1: ethernet-phy@01 {
 427                                 interrupt-parent = <&mpic>;
 428                                 interrupts = <2 1>;
 429                                 reg = <1>;
 430                                 device_type = "ethernet-phy";
 431                         };
 432                         qe_phy2: ethernet-phy@02 {
 433                                 interrupt-parent = <&mpic>;
 434                                 interrupts = <1 1>;
 435                                 reg = <2>;
 436                                 device_type = "ethernet-phy";
 437                         };
 438                         qe_phy3: ethernet-phy@03 {
 439                                 interrupt-parent = <&mpic>;
 440                                 interrupts = <2 1>;
 441                                 reg = <3>;
 442                                 device_type = "ethernet-phy";
 443                         };
 444                 };
 445
 446                 qeic: qeic@80 {
 447                         interrupt-controller;
 448                         device_type = "qeic";
 449                         #address-cells = <0>;
 450                         #interrupt-cells = <1>;
 451                         reg = <80 80>;
 452                         built-in;
 453                         big-endian;
 454                         interrupts = <2e 2 2e 2>; //high:30 low:30
 455                         interrupt-parent = <&mpic>;
 456                 };
 457
 458         };
 459 };