arch/powerpc/boot/dts/mpc8379_rdb.dts

   1 /*
   2  * MPC8379E RDB Device Tree Source
   3  *
   4  * Copyright 2007, 2008 Freescale Semiconductor Inc.
   5  *
   6  * This program is free software; you can redistribute  it and/or modify it
   7  * under  the terms of  the GNU General  Public License as published by the
   8  * Free Software Foundation;  either version 2 of the  License, or (at your
   9  * option) any later version.
  10  */
  11
  12 /dts-v1/;
  13
  14 / {
  15         compatible = "fsl,mpc8379rdb";
  16         #address-cells = <1>;
  17         #size-cells = <1>;
  18
  19         aliases {
  20                 ethernet0 = &enet0;
  21                 ethernet1 = &enet1;
  22                 serial0 = &serial0;
  23                 serial1 = &serial1;
  24                 pci0 = &pci0;
  25         };
  26
  27         cpus {
  28                 #address-cells = <1>;
  29                 #size-cells = <0>;
  30
  31                 PowerPC,8379@0 {
  32                         device_type = "cpu";
  33                         reg = <0x0>;
  34                         d-cache-line-size = <32>;
  35                         i-cache-line-size = <32>;
  36                         d-cache-size = <32768>;
  37                         i-cache-size = <32768>;
  38                         timebase-frequency = <0>;
  39                         bus-frequency = <0>;
  40                         clock-frequency = <0>;
  41                 };
  42         };
  43
  44         memory {
  45                 device_type = "memory";
  46                 reg = <0x00000000 0x10000000>;  // 256MB at 0
  47         };
  48
  49         localbus@e0005000 {
  50                 #address-cells = <2>;
  51                 #size-cells = <1>;
  52                 compatible = "fsl,mpc8379-elbc", "fsl,elbc", "simple-bus";
  53                 reg = <0xe0005000 0x1000>;
  54                 interrupts = <77 0x8>;
  55                 interrupt-parent = <&ipic>;
  56
  57                 // CS0 and CS1 are swapped when
  58                 // booting from nand, but the
  59                 // addresses are the same.
  60                 ranges = <0x0 0x0 0xfe000000 0x00800000
  61                           0x1 0x0 0xe0600000 0x00008000
  62                           0x2 0x0 0xf0000000 0x00020000
  63                           0x3 0x0 0xfa000000 0x00008000>;
  64
  65                 flash@0,0 {
  66                         #address-cells = <1>;
  67                         #size-cells = <1>;
  68                         compatible = "cfi-flash";
  69                         reg = <0x0 0x0 0x800000>;
  70                         bank-width = <2>;
  71                         device-width = <1>;
  72                 };
  73
  74                 nand@1,0 {
  75                         #address-cells = <1>;
  76                         #size-cells = <1>;
  77                         compatible = "fsl,mpc8379-fcm-nand",
  78                                      "fsl,elbc-fcm-nand";
  79                         reg = <0x1 0x0 0x8000>;
  80
  81                         u-boot@0 {
  82                                 reg = <0x0 0x100000>;
  83                                 read-only;
  84                         };
  85
  86                         kernel@100000 {
  87                                 reg = <0x100000 0x300000>;
  88                         };
  89                         fs@400000 {
  90                                 reg = <0x400000 0x1c00000>;
  91                         };
  92                 };
  93         };
  94
  95         immr@e0000000 {
  96                 #address-cells = <1>;
  97                 #size-cells = <1>;
  98                 device_type = "soc";
  99                 compatible = "simple-bus";
 100                 ranges = <0x0 0xe0000000 0x00100000>;
 101                 reg = <0xe0000000 0x00000200>;
 102                 bus-frequency = <0>;
 103
 104                 wdt@200 {
 105                         device_type = "watchdog";
 106                         compatible = "mpc83xx_wdt";
 107                         reg = <0x200 0x100>;
 108                 };
 109
 110                 gpio1: gpio-controller@c00 {
 111                         #gpio-cells = <2>;
 112                         compatible = "fsl,mpc8379-gpio", "fsl,mpc8349-gpio";
 113                         reg = <0xc00 0x100>;
 114                         interrupts = <74 0x8>;
 115                         interrupt-parent = <&ipic>;
 116                         gpio-controller;
 117                 };
 118
 119                 gpio2: gpio-controller@d00 {
 120                         #gpio-cells = <2>;
 121                         compatible = "fsl,mpc8379-gpio", "fsl,mpc8349-gpio";
 122                         reg = <0xd00 0x100>;
 123                         interrupts = <75 0x8>;
 124                         interrupt-parent = <&ipic>;
 125                         gpio-controller;
 126                 };
 127
 128                 i2c@3000 {
 129                         #address-cells = <1>;
 130                         #size-cells = <0>;
 131                         cell-index = <0>;
 132                         compatible = "fsl-i2c";
 133                         reg = <0x3000 0x100>;
 134                         interrupts = <14 0x8>;
 135                         interrupt-parent = <&ipic>;
 136                         dfsrr;
 137
 138                         dtt@48 {
 139                                 compatible = "national,lm75";
 140                                 reg = <0x48>;
 141                         };
 142
 143                         at24@50 {
 144                                 compatible = "at24,24c256";
 145                                 reg = <0x50>;
 146                         };
 147
 148                         rtc@68 {
 149                                 compatible = "dallas,ds1339";
 150                                 reg = <0x68>;
 151                         };
 152
 153                         mcu_pio: mcu@a {
 154                                 #gpio-cells = <2>;
 155                                 compatible = "fsl,mc9s08qg8-mpc8379erdb",
 156                                              "fsl,mcu-mpc8349emitx";
 157                                 reg = <0x0a>;
 158                                 gpio-controller;
 159                         };
 160                 };
 161
 162                 i2c@3100 {
 163                         #address-cells = <1>;
 164                         #size-cells = <0>;
 165                         cell-index = <1>;
 166                         compatible = "fsl-i2c";
 167                         reg = <0x3100 0x100>;
 168                         interrupts = <15 0x8>;
 169                         interrupt-parent = <&ipic>;
 170                         dfsrr;
 171                 };
 172
 173                 spi@7000 {
 174                         cell-index = <0>;
 175                         compatible = "fsl,spi";
 176                         reg = <0x7000 0x1000>;
 177                         interrupts = <16 0x8>;
 178                         interrupt-parent = <&ipic>;
 179                         mode = "cpu";
 180                 };
 181
 182                 dma@82a8 {
 183                         #address-cells = <1>;
 184                         #size-cells = <1>;
 185                         compatible = "fsl,mpc8379-dma", "fsl,elo-dma";
 186                         reg = <0x82a8 4>;
 187                         ranges = <0 0x8100 0x1a8>;
 188                         interrupt-parent = <&ipic>;
 189                         interrupts = <71 8>;
 190                         cell-index = <0>;
 191                         dma-channel@0 {
 192                                 compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
 193                                 reg = <0 0x80>;
 194                                 cell-index = <0>;
 195                                 interrupt-parent = <&ipic>;
 196                                 interrupts = <71 8>;
 197                         };
 198                         dma-channel@80 {
 199                                 compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
 200                                 reg = <0x80 0x80>;
 201                                 cell-index = <1>;
 202                                 interrupt-parent = <&ipic>;
 203                                 interrupts = <71 8>;
 204                         };
 205                         dma-channel@100 {
 206                                 compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
 207                                 reg = <0x100 0x80>;
 208                                 cell-index = <2>;
 209                                 interrupt-parent = <&ipic>;
 210                                 interrupts = <71 8>;
 211                         };
 212                         dma-channel@180 {
 213                                 compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
 214                                 reg = <0x180 0x28>;
 215                                 cell-index = <3>;
 216                                 interrupt-parent = <&ipic>;
 217                                 interrupts = <71 8>;
 218                         };
 219                 };
 220
 221                 usb@23000 {
 222                         compatible = "fsl-usb2-dr";
 223                         reg = <0x23000 0x1000>;
 224                         #address-cells = <1>;
 225                         #size-cells = <0>;
 226                         interrupt-parent = <&ipic>;
 227                         interrupts = <38 0x8>;
 228                         phy_type = "ulpi";
 229                 };
 230
 231                 mdio@24520 {
 232                         #address-cells = <1>;
 233                         #size-cells = <0>;
 234                         compatible = "fsl,gianfar-mdio";
 235                         reg = <0x24520 0x20>;
 236                         phy2: ethernet-phy@2 {
 237                                 interrupt-parent = <&ipic>;
 238                                 interrupts = <17 0x8>;
 239                                 reg = <0x2>;
 240                                 device_type = "ethernet-phy";
 241                         };
 242                         tbi0: tbi-phy@11 {
 243                                 reg = <0x11>;
 244                                 device_type = "tbi-phy";
 245                         };
 246                 };
 247
 248                 mdio@25520 {
 249                         #address-cells = <1>;
 250                         #size-cells = <0>;
 251                         compatible = "fsl,gianfar-tbi";
 252                         reg = <0x25520 0x20>;
 253
 254                         tbi1: tbi-phy@11 {
 255                                 reg = <0x11>;
 256                                 device_type = "tbi-phy";
 257                         };
 258                 };
 259
 260                 enet0: ethernet@24000 {
 261                         cell-index = <0>;
 262                         device_type = "network";
 263                         model = "eTSEC";
 264                         compatible = "gianfar";
 265                         reg = <0x24000 0x1000>;
 266                         local-mac-address = [ 00 00 00 00 00 00 ];
 267                         interrupts = <32 0x8 33 0x8 34 0x8>;
 268                         phy-connection-type = "mii";
 269                         interrupt-parent = <&ipic>;
 270                         tbi-handle = <&tbi0>;
 271                         phy-handle = <&phy2>;
 272                 };
 273
 274                 enet1: ethernet@25000 {
 275                         cell-index = <1>;
 276                         device_type = "network";
 277                         model = "eTSEC";
 278                         compatible = "gianfar";
 279                         reg = <0x25000 0x1000>;
 280                         local-mac-address = [ 00 00 00 00 00 00 ];
 281                         interrupts = <35 0x8 36 0x8 37 0x8>;
 282                         phy-connection-type = "mii";
 283                         interrupt-parent = <&ipic>;
 284                         fixed-link = <1 1 1000 0 0>;
 285                         tbi-handle = <&tbi1>;
 286                 };
 287
 288                 serial0: serial@4500 {
 289                         cell-index = <0>;
 290                         device_type = "serial";
 291                         compatible = "ns16550";
 292                         reg = <0x4500 0x100>;
 293                         clock-frequency = <0>;
 294                         interrupts = <9 0x8>;
 295                         interrupt-parent = <&ipic>;
 296                 };
 297
 298                 serial1: serial@4600 {
 299                         cell-index = <1>;
 300                         device_type = "serial";
 301                         compatible = "ns16550";
 302                         reg = <0x4600 0x100>;
 303                         clock-frequency = <0>;
 304                         interrupts = <10 0x8>;
 305                         interrupt-parent = <&ipic>;
 306                 };
 307
 308                 crypto@30000 {
 309                         compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
 310                                      "fsl,sec2.1", "fsl,sec2.0";
 311                         reg = <0x30000 0x10000>;
 312                         interrupts = <11 0x8>;
 313                         interrupt-parent = <&ipic>;
 314                         fsl,num-channels = <4>;
 315                         fsl,channel-fifo-len = <24>;
 316                         fsl,exec-units-mask = <0x9fe>;
 317                         fsl,descriptor-types-mask = <0x3ab0ebf>;
 318                 };
 319
 320                 sdhci@2e000 {
 321                         compatible = "fsl,mpc8379-esdhc";
 322                         reg = <0x2e000 0x1000>;
 323                         interrupts = <42 0x8>;
 324                         interrupt-parent = <&ipic>;
 325                         /* Filled in by U-Boot */
 326                         clock-frequency = <0>;
 327                 };
 328
 329                 sata@18000 {
 330                         compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
 331                         reg = <0x18000 0x1000>;
 332                         interrupts = <44 0x8>;
 333                         interrupt-parent = <&ipic>;
 334                 };
 335
 336                 sata@19000 {
 337                         compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
 338                         reg = <0x19000 0x1000>;
 339                         interrupts = <45 0x8>;
 340                         interrupt-parent = <&ipic>;
 341                 };
 342
 343                 sata@1a000 {
 344                         compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
 345                         reg = <0x1a000 0x1000>;
 346                         interrupts = <46 0x8>;
 347                         interrupt-parent = <&ipic>;
 348                 };
 349
 350                 sata@1b000 {
 351                         compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
 352                         reg = <0x1b000 0x1000>;
 353                         interrupts = <47 0x8>;
 354                         interrupt-parent = <&ipic>;
 355                 };
 356
 357                 /* IPIC
 358                  * interrupts cell = <intr #, sense>
 359                  * sense values match linux IORESOURCE_IRQ_* defines:
 360                  * sense == 8: Level, low assertion
 361                  * sense == 2: Edge, high-to-low change
 362                  */
 363                 ipic: interrupt-controller@700 {
 364                         compatible = "fsl,ipic";
 365                         interrupt-controller;
 366                         #address-cells = <0>;
 367                         #interrupt-cells = <2>;
 368                         reg = <0x700 0x100>;
 369                 };
 370         };
 371
 372         pci0: pci@e0008500 {
 373                 interrupt-map-mask = <0xf800 0 0 7>;
 374                 interrupt-map = <
 375                                 /* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */
 376
 377                                 /* IDSEL AD14 IRQ6 inta */
 378                                  0x7000 0x0 0x0 0x1 &ipic 22 0x8
 379
 380                                 /* IDSEL AD15 IRQ5 inta, IRQ6 intb, IRQ7 intd */
 381                                  0x7800 0x0 0x0 0x1 &ipic 21 0x8
 382                                  0x7800 0x0 0x0 0x2 &ipic 22 0x8
 383                                  0x7800 0x0 0x0 0x4 &ipic 23 0x8
 384
 385                                 /* IDSEL AD28 IRQ7 inta, IRQ5 intb IRQ6 intc*/
 386                                  0xE000 0x0 0x0 0x1 &ipic 23 0x8
 387                                  0xE000 0x0 0x0 0x2 &ipic 21 0x8
 388                                  0xE000 0x0 0x0 0x3 &ipic 22 0x8>;
 389                 interrupt-parent = <&ipic>;
 390                 interrupts = <66 0x8>;
 391                 bus-range = <0x0 0x0>;
 392                 ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
 393                           0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
 394                           0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
 395                 clock-frequency = <66666666>;
 396                 #interrupt-cells = <1>;
 397                 #size-cells = <2>;
 398                 #address-cells = <3>;
 399                 reg = <0xe0008500 0x100         /* internal registers */
 400                        0xe0008300 0x8>;         /* config space access registers */
 401                 compatible = "fsl,mpc8349-pci";
 402                 device_type = "pci";
 403         };
 404 };