2 * MPC8349E MDS Device Tree Source
4 * Copyright 2005, 2006 Freescale Semiconductor Inc.
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the
8 * Free Software Foundation; either version 2 of the License, or (at your
9 * option) any later version.
15 model = "MPC8349EMDS";
16 compatible = "MPC8349EMDS", "MPC834xMDS", "MPC83xxMDS";
36 d-cache-line-size = <32>;
37 i-cache-line-size = <32>;
38 d-cache-size = <32768>;
39 i-cache-size = <32768>;
40 timebase-frequency = <0>; // from bootloader
41 bus-frequency = <0>; // from bootloader
42 clock-frequency = <0>; // from bootloader
47 device_type = "memory";
48 reg = <0x00000000 0x10000000>; // 256MB at 0
52 device_type = "board-control";
53 reg = <0xe2400000 0x8000>;
60 ranges = <0x0 0xe0000000 0x00100000>;
61 reg = <0xe0000000 0x00000200>;
65 device_type = "watchdog";
66 compatible = "mpc83xx_wdt";
74 compatible = "fsl-i2c";
76 interrupts = <14 0x8>;
77 interrupt-parent = <&ipic>;
81 compatible = "dallas,ds1374";
90 compatible = "fsl-i2c";
92 interrupts = <15 0x8>;
93 interrupt-parent = <&ipic>;
99 compatible = "fsl,spi";
100 reg = <0x7000 0x1000>;
101 interrupts = <16 0x8>;
102 interrupt-parent = <&ipic>;
107 #address-cells = <1>;
109 compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
111 ranges = <0 0x8100 0x1a8>;
112 interrupt-parent = <&ipic>;
116 compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
118 interrupt-parent = <&ipic>;
122 compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
124 interrupt-parent = <&ipic>;
128 compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
130 interrupt-parent = <&ipic>;
134 compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
136 interrupt-parent = <&ipic>;
141 /* phy type (ULPI or SERIAL) are only types supported for MPH */
144 compatible = "fsl-usb2-mph";
145 reg = <0x22000 0x1000>;
146 #address-cells = <1>;
148 interrupt-parent = <&ipic>;
149 interrupts = <39 0x8>;
153 /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
155 compatible = "fsl-usb2-dr";
156 reg = <0x23000 0x1000>;
157 #address-cells = <1>;
159 interrupt-parent = <&ipic>;
160 interrupts = <38 0x8>;
166 #address-cells = <1>;
168 compatible = "fsl,gianfar-mdio";
169 reg = <0x24520 0x20>;
171 phy0: ethernet-phy@0 {
172 interrupt-parent = <&ipic>;
173 interrupts = <17 0x8>;
175 device_type = "ethernet-phy";
177 phy1: ethernet-phy@1 {
178 interrupt-parent = <&ipic>;
179 interrupts = <18 0x8>;
181 device_type = "ethernet-phy";
185 enet0: ethernet@24000 {
187 device_type = "network";
189 compatible = "gianfar";
190 reg = <0x24000 0x1000>;
191 local-mac-address = [ 00 00 00 00 00 00 ];
192 interrupts = <32 0x8 33 0x8 34 0x8>;
193 interrupt-parent = <&ipic>;
194 phy-handle = <&phy0>;
195 linux,network-index = <0>;
198 enet1: ethernet@25000 {
200 device_type = "network";
202 compatible = "gianfar";
203 reg = <0x25000 0x1000>;
204 local-mac-address = [ 00 00 00 00 00 00 ];
205 interrupts = <35 0x8 36 0x8 37 0x8>;
206 interrupt-parent = <&ipic>;
207 phy-handle = <&phy1>;
208 linux,network-index = <1>;
211 serial0: serial@4500 {
213 device_type = "serial";
214 compatible = "ns16550";
215 reg = <0x4500 0x100>;
216 clock-frequency = <0>;
217 interrupts = <9 0x8>;
218 interrupt-parent = <&ipic>;
221 serial1: serial@4600 {
223 device_type = "serial";
224 compatible = "ns16550";
225 reg = <0x4600 0x100>;
226 clock-frequency = <0>;
227 interrupts = <10 0x8>;
228 interrupt-parent = <&ipic>;
231 /* May need to remove if on a part without crypto engine */
233 device_type = "crypto";
235 compatible = "talitos";
236 reg = <0x30000 0x10000>;
237 interrupts = <11 0x8>;
238 interrupt-parent = <&ipic>;
240 channel-fifo-len = <24>;
241 exec-units-mask = <0x0000007e>;
242 /* desc mask is for rev2.0,
243 * we need runtime fixup for >2.0 */
244 descriptor-types-mask = <0x01010ebf>;
248 * interrupts cell = <intr #, sense>
249 * sense values match linux IORESOURCE_IRQ_* defines:
250 * sense == 8: Level, low assertion
251 * sense == 2: Edge, high-to-low change
254 interrupt-controller;
255 #address-cells = <0>;
256 #interrupt-cells = <2>;
258 device_type = "ipic";
264 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
268 0x8800 0x0 0x0 0x1 &ipic 20 0x8
269 0x8800 0x0 0x0 0x2 &ipic 21 0x8
270 0x8800 0x0 0x0 0x3 &ipic 22 0x8
271 0x8800 0x0 0x0 0x4 &ipic 23 0x8
274 0x9000 0x0 0x0 0x1 &ipic 22 0x8
275 0x9000 0x0 0x0 0x2 &ipic 23 0x8
276 0x9000 0x0 0x0 0x3 &ipic 20 0x8
277 0x9000 0x0 0x0 0x4 &ipic 21 0x8
280 0x9800 0x0 0x0 0x1 &ipic 23 0x8
281 0x9800 0x0 0x0 0x2 &ipic 20 0x8
282 0x9800 0x0 0x0 0x3 &ipic 21 0x8
283 0x9800 0x0 0x0 0x4 &ipic 22 0x8
286 0xa800 0x0 0x0 0x1 &ipic 20 0x8
287 0xa800 0x0 0x0 0x2 &ipic 21 0x8
288 0xa800 0x0 0x0 0x3 &ipic 22 0x8
289 0xa800 0x0 0x0 0x4 &ipic 23 0x8
292 0xb000 0x0 0x0 0x1 &ipic 23 0x8
293 0xb000 0x0 0x0 0x2 &ipic 20 0x8
294 0xb000 0x0 0x0 0x3 &ipic 21 0x8
295 0xb000 0x0 0x0 0x4 &ipic 22 0x8
298 0xb800 0x0 0x0 0x1 &ipic 22 0x8
299 0xb800 0x0 0x0 0x2 &ipic 23 0x8
300 0xb800 0x0 0x0 0x3 &ipic 20 0x8
301 0xb800 0x0 0x0 0x4 &ipic 21 0x8
304 0xc000 0x0 0x0 0x1 &ipic 21 0x8
305 0xc000 0x0 0x0 0x2 &ipic 22 0x8
306 0xc000 0x0 0x0 0x3 &ipic 23 0x8
307 0xc000 0x0 0x0 0x4 &ipic 20 0x8>;
308 interrupt-parent = <&ipic>;
309 interrupts = <66 0x8>;
311 ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
312 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
313 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
314 clock-frequency = <66666666>;
315 #interrupt-cells = <1>;
317 #address-cells = <3>;
318 reg = <0xe0008500 0x100>;
319 compatible = "fsl,mpc8349-pci";
325 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
329 0x8800 0x0 0x0 0x1 &ipic 20 0x8
330 0x8800 0x0 0x0 0x2 &ipic 21 0x8
331 0x8800 0x0 0x0 0x3 &ipic 22 0x8
332 0x8800 0x0 0x0 0x4 &ipic 23 0x8
335 0x9000 0x0 0x0 0x1 &ipic 22 0x8
336 0x9000 0x0 0x0 0x2 &ipic 23 0x8
337 0x9000 0x0 0x0 0x3 &ipic 20 0x8
338 0x9000 0x0 0x0 0x4 &ipic 21 0x8
341 0x9800 0x0 0x0 0x1 &ipic 23 0x8
342 0x9800 0x0 0x0 0x2 &ipic 20 0x8
343 0x9800 0x0 0x0 0x3 &ipic 21 0x8
344 0x9800 0x0 0x0 0x4 &ipic 22 0x8
347 0xa800 0x0 0x0 0x1 &ipic 20 0x8
348 0xa800 0x0 0x0 0x2 &ipic 21 0x8
349 0xa800 0x0 0x0 0x3 &ipic 22 0x8
350 0xa800 0x0 0x0 0x4 &ipic 23 0x8
353 0xb000 0x0 0x0 0x1 &ipic 23 0x8
354 0xb000 0x0 0x0 0x2 &ipic 20 0x8
355 0xb000 0x0 0x0 0x3 &ipic 21 0x8
356 0xb000 0x0 0x0 0x4 &ipic 22 0x8
359 0xb800 0x0 0x0 0x1 &ipic 22 0x8
360 0xb800 0x0 0x0 0x2 &ipic 23 0x8
361 0xb800 0x0 0x0 0x3 &ipic 20 0x8
362 0xb800 0x0 0x0 0x4 &ipic 21 0x8
365 0xc000 0x0 0x0 0x1 &ipic 21 0x8
366 0xc000 0x0 0x0 0x2 &ipic 22 0x8
367 0xc000 0x0 0x0 0x3 &ipic 23 0x8
368 0xc000 0x0 0x0 0x4 &ipic 20 0x8>;
369 interrupt-parent = <&ipic>;
370 interrupts = <67 0x8>;
372 ranges = <0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000
373 0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
374 0x01000000 0x0 0x00000000 0xe2100000 0x0 0x00100000>;
375 clock-frequency = <66666666>;
376 #interrupt-cells = <1>;
378 #address-cells = <3>;
379 reg = <0xe0008600 0x100>;
380 compatible = "fsl,mpc8349-pci";