1 source "arch/powerpc/platforms/Kconfig.cputype"
20 config ARCH_PHYS_ADDR_T_64BIT
21 def_bool PPC64 || PHYS_64BIT
23 config ARCH_DMA_ADDR_T_64BIT
24 def_bool ARCH_PHYS_ADDR_T_64BIT
30 config GENERIC_CMOS_UPDATE
33 config GENERIC_TIME_VSYSCALL
36 config GENERIC_CLOCKEVENTS
39 config HAVE_SETUP_PER_CPU_AREA
42 config NEED_PER_CPU_EMBED_FIRST_CHUNK
46 int "Number of virtual interrupt numbers"
50 This defines the number of virtual interrupt numbers the kernel
51 can manage. Virtual interrupt numbers are what you see in
52 /proc/interrupts. If you configure your system to have too few,
53 drivers will fail to load or worse - handle with care.
55 config STACKTRACE_SUPPORT
59 config HAVE_LATENCYTOP_SUPPORT
62 config TRACE_IRQFLAGS_SUPPORT
66 config LOCKDEP_SUPPORT
70 config RWSEM_GENERIC_SPINLOCK
73 config RWSEM_XCHGADD_ALGORITHM
77 config GENERIC_LOCKBREAK
80 depends on SMP && PREEMPT
82 config ARCH_HAS_ILOG2_U32
86 config ARCH_HAS_ILOG2_U64
90 config ARCH_HAS_CPU_IDLE_WAIT
94 config GENERIC_HWEIGHT
101 Generic GPIO API support
103 config ARCH_NO_VIRT_TO_BUS
110 select OF_EARLY_FLATTREE
111 select HAVE_FTRACE_MCOUNT_RECORD
112 select HAVE_DYNAMIC_FTRACE
113 select HAVE_FUNCTION_TRACER
114 select HAVE_FUNCTION_GRAPH_TRACER
115 select ARCH_WANT_OPTIONAL_GPIOLIB
117 select HAVE_IOREMAP_PROT
118 select HAVE_EFFICIENT_UNALIGNED_ACCESS
120 select HAVE_ARCH_KGDB
121 select HAVE_KRETPROBES
122 select HAVE_ARCH_TRACEHOOK
124 select HAVE_MEMBLOCK_NODE_MAP
125 select HAVE_DMA_ATTRS
126 select HAVE_DMA_API_DEBUG
127 select USE_GENERIC_SMP_HELPERS if SMP
129 select HAVE_SYSCALL_WRAPPERS if PPC64
130 select GENERIC_ATOMIC64 if PPC32
132 select HAVE_PERF_EVENTS
133 select HAVE_REGS_AND_STACK_ACCESS_API
134 select HAVE_HW_BREAKPOINT if PERF_EVENTS && PPC_BOOK3S_64
135 select HAVE_GENERIC_HARDIRQS
136 select HAVE_SPARSE_IRQ
138 select GENERIC_IRQ_SHOW
139 select GENERIC_IRQ_SHOW_LEVEL
140 select IRQ_FORCED_THREADING
141 select HAVE_RCU_TABLE_FREE if SMP
142 select HAVE_SYSCALL_TRACEPOINTS
143 select HAVE_BPF_JIT if (PPC64 && NET)
144 select HAVE_ARCH_JUMP_LABEL
145 select ARCH_HAVE_NMI_SAFE_CMPXCHG
154 select COMPAT_BINFMT_ELF
156 config SYSVIPC_COMPAT
158 depends on COMPAT && SYSVIPC
161 # All PPC32s use generic nvram driver through ppc_md
166 config SCHED_OMIT_FRAME_POINTER
170 config ARCH_MAY_HAVE_PC_FDC
172 default !PPC_PSERIES || PCI
177 config PPC_UDBG_16550
181 config GENERIC_TBSYNC
183 default y if PPC32 && SMP
195 config SYS_SUPPORTS_APM_EMULATION
196 default y if PMAC_APM_EMU
202 Used to allow a board to specify it wants an ePAPR compliant wrapper.
205 config DEFAULT_UIMAGE
208 Used to allow a board to specify it wants a uImage built by default
214 config ARCH_HIBERNATION_POSSIBLE
218 config ARCH_SUSPEND_POSSIBLE
220 depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx || \
221 (PPC_85xx && !SMP) || PPC_86xx || PPC_PSERIES || 44x || 40x
223 config PPC_DCR_NATIVE
233 depends on PPC_DCR_NATIVE || PPC_DCR_MMIO
236 config PPC_OF_PLATFORM_PCI
239 depends on PPC64 # not supported on 32 bits yet
242 config ARCH_SUPPORTS_DEBUG_PAGEALLOC
245 config PPC_ADV_DEBUG_REGS
247 depends on 40x || BOOKE
250 config PPC_ADV_DEBUG_IACS
252 depends on PPC_ADV_DEBUG_REGS
256 config PPC_ADV_DEBUG_DACS
258 depends on PPC_ADV_DEBUG_REGS
261 config PPC_ADV_DEBUG_DVCS
263 depends on PPC_ADV_DEBUG_REGS
267 config PPC_ADV_DEBUG_DAC_RANGE
269 depends on PPC_ADV_DEBUG_REGS && 44x
272 source "init/Kconfig"
274 source "kernel/Kconfig.freezer"
276 source "arch/powerpc/sysdev/Kconfig"
277 source "arch/powerpc/platforms/Kconfig"
279 menu "Kernel options"
282 bool "High memory support"
285 source kernel/time/Kconfig
286 source kernel/Kconfig.hz
287 source kernel/Kconfig.preempt
288 source "fs/Kconfig.binfmt"
290 config HUGETLB_PAGE_SIZE_VARIABLE
292 depends on HUGETLB_PAGE
295 config MATH_EMULATION
296 bool "Math emulation"
297 depends on 4xx || 8xx || E200 || PPC_MPC832x || E500
299 Some PowerPC chips designed for embedded applications do not have
300 a floating-point unit and therefore do not implement the
301 floating-point instructions in the PowerPC instruction set. If you
302 say Y here, the kernel will include code to emulate a floating-point
303 unit, which will allow programs that use floating-point
306 config 8XX_MINIMAL_FPEMU
307 bool "Minimal math emulation for 8xx"
308 depends on 8xx && !MATH_EMULATION
310 Older arch/ppc kernels still emulated a few floating point
311 instructions such as load and store, even when full math
312 emulation is disabled. Say "Y" here if you want to preserve
315 It is recommended that you build a soft-float userspace instead.
321 bool "SWIOTLB support"
325 Support for IO bounce buffering for systems without an IOMMU.
326 This allows us to DMA to the full physical address space on
327 platforms where the size of a physical address is larger
328 than the bus address. Not all platforms support this.
331 bool "Support for enabling/disabling CPUs"
332 depends on SMP && HOTPLUG && EXPERIMENTAL && (PPC_PSERIES || PPC_PMAC || PPC_POWERNV)
334 Say Y here to be able to disable and re-enable individual
335 CPUs at runtime on SMP machines.
337 Say N if you are unsure.
339 config ARCH_CPU_PROBE_RELEASE
341 depends on HOTPLUG_CPU
343 config ARCH_ENABLE_MEMORY_HOTPLUG
346 config ARCH_HAS_WALK_MEMORY
349 config ARCH_ENABLE_MEMORY_HOTREMOVE
353 bool "kexec system call (EXPERIMENTAL)"
354 depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP && !PPC_47x)) && EXPERIMENTAL
356 kexec is a system call that implements the ability to shutdown your
357 current kernel, and to start another kernel. It is like a reboot
358 but it is independent of the system firmware. And like a reboot
359 you can start any kernel with it, not just Linux.
361 The name comes from the similarity to the exec system call.
363 It is an ongoing process to be certain the hardware in a machine
364 is properly shutdown, so do not be surprised if this code does not
365 initially work for you. It may help to enable device hotplugging
366 support. As of this writing the exact hardware interface is
367 strongly in flux, so no good recommendation can be made.
370 bool "Build a kdump crash kernel"
371 depends on PPC64 || 6xx || FSL_BOOKE || (44x && !SMP && !PPC_47x)
372 select RELOCATABLE if PPC64 || 44x
373 select DYNAMIC_MEMSTART if FSL_BOOKE
375 Build a kernel suitable for use as a kdump capture kernel.
376 The same kernel binary can be used as production kernel and dump
380 bool "Hypervisor-assisted dump (EXPERIMENTAL)"
381 depends on PPC_PSERIES && EXPERIMENTAL
383 Hypervisor-assisted dump is meant to be a kdump replacement
384 offering robustness and speed not possible without system
385 hypervisor assistance.
390 bool "Distribute interrupts on all CPUs by default"
391 depends on SMP && !MV64360
393 This option gives the kernel permission to distribute IRQs across
394 multiple CPUs. Saying N here will route all IRQs to the first
395 CPU. Generally saying Y is safe, although some problems have been
396 reported with SMP Power Macintoshes with this option enabled.
401 default y if SMP && PPC_PSERIES
407 depends on NEED_MULTIPLE_NODES
409 config MAX_ACTIVE_REGIONS
411 default "256" if PPC64
414 config ARCH_SELECT_MEMORY_MODEL
418 config ARCH_FLATMEM_ENABLE
420 depends on (PPC64 && !NUMA) || PPC32
422 config ARCH_SPARSEMEM_ENABLE
425 select SPARSEMEM_VMEMMAP_ENABLE
427 config ARCH_SPARSEMEM_DEFAULT
429 depends on (SMP && PPC_PSERIES) || PPC_PS3
431 config SYS_SUPPORTS_HUGETLBFS
436 config ARCH_MEMORY_PROBE
438 depends on MEMORY_HOTPLUG
440 # Some NUMA nodes have memory ranges that span
441 # other nodes. Even though a pfn is valid and
442 # between a node's start and end pfns, it may not
443 # reside on that node. See memmap_init_zone()
445 config NODES_SPAN_OTHER_NODES
447 depends on NEED_MULTIPLE_NODES
449 config PPC_HAS_HASH_64K
455 bool "Using standard binutils settings"
459 Turning this option off allows you to select 256KB PAGE_SIZE on 44x.
460 Note, that kernel will be able to run only those applications,
461 which had been compiled using binutils later than 2.17.50.0.3 with
462 '-zmax-page-size' set to 256K (the default is 64K). Or, if using
463 the older binutils, you can patch them with a trivial patch, which
464 changes the ELF_MAXPAGESIZE definition from 0x10000 to 0x40000.
470 Select the kernel logical page size. Increasing the page size
471 will reduce software overhead at each page boundary, allow
472 hardware prefetch mechanisms to be more effective, and allow
473 larger dma transfers increasing IO efficiency and reducing
474 overhead. However the utilization of memory will increase.
475 For example, each cached file will using a multiple of the
476 page size to hold its contents and the difference between the
477 end of file and the end of page is wasted.
479 Some dedicated systems, such as software raid serving with
480 accelerated calculations, have shown significant increases.
482 If you configure a 64 bit kernel for 64k pages but the
483 processor does not support them, then the kernel will simulate
484 them with 4k pages, loading them on demand, but with the
485 reduced software overhead and larger internal fragmentation.
486 For the 32 bit kernel, a large page option will not be offered
487 unless it is supported by the configured processor.
489 If unsure, choose 4K_PAGES.
495 bool "16k page size" if 44x
498 bool "64k page size" if 44x || PPC_STD_MMU_64 || PPC_BOOK3E_64
499 select PPC_HAS_HASH_64K if PPC_STD_MMU_64
501 config PPC_256K_PAGES
502 bool "256k page size" if 44x
503 depends on !STDBINUTILS
505 Make the page size 256k.
507 As the ELF standard only requires alignment to support page
508 sizes up to 64k, you will need to compile all of your user
509 space applications with a non-standard binutils settings
510 (see the STDBINUTILS description for details).
512 Say N unless you know what you are doing.
516 config FORCE_MAX_ZONEORDER
517 int "Maximum zone order"
518 range 9 64 if PPC64 && PPC_64K_PAGES
519 default "9" if PPC64 && PPC_64K_PAGES
520 range 13 64 if PPC64 && !PPC_64K_PAGES
521 default "13" if PPC64 && !PPC_64K_PAGES
522 range 9 64 if PPC32 && PPC_16K_PAGES
523 default "9" if PPC32 && PPC_16K_PAGES
524 range 7 64 if PPC32 && PPC_64K_PAGES
525 default "7" if PPC32 && PPC_64K_PAGES
526 range 5 64 if PPC32 && PPC_256K_PAGES
527 default "5" if PPC32 && PPC_256K_PAGES
531 The kernel memory allocator divides physically contiguous memory
532 blocks into "zones", where each zone is a power of two number of
533 pages. This option selects the largest power of two that the kernel
534 keeps in the memory allocator. If you need to allocate very large
535 blocks of physically contiguous memory, then you may need to
538 This config option is actually maximum order plus one. For example,
539 a value of 11 means that the largest free memory block is 2^10 pages.
541 The page size is not necessarily 4KB. For example, on 64-bit
542 systems, 64KB pages can be enabled via CONFIG_PPC_64K_PAGES. Keep
543 this in mind when choosing a value for this option.
545 config PPC_SUBPAGE_PROT
546 bool "Support setting protections for 4k subpages"
547 depends on PPC_STD_MMU_64 && PPC_64K_PAGES
549 This option adds support for a system call to allow user programs
550 to set access permissions (read/write, readonly, or no access)
551 on the 4k subpages of each 64k page.
554 bool "SMT (Hyperthreading) scheduler support"
555 depends on PPC64 && SMP
557 SMT scheduler support improves the CPU scheduler's decision making
558 when dealing with POWER5 cpus at a cost of slightly increased
559 overhead in some places. If unsure say N here.
562 bool "Default bootloader kernel arguments"
565 string "Initial kernel command string"
566 depends on CMDLINE_BOOL
567 default "console=ttyS0,9600 console=tty0 root=/dev/sda2"
569 On some platforms, there is currently no way for the boot loader to
570 pass arguments to the kernel. For these platforms, you can supply
571 some command-line options at build time by entering them here. In
572 most cases you will need to specify the root device here.
575 string "Additional default image types"
577 List additional targets to be built by the bootwrapper here (separated
578 by spaces). This is useful for targets that depend of device tree
579 files in the .dts directory.
581 Targets in this list will be build as part of the default build
582 target, or when the user does a 'make zImage' or a
583 'make zImage.initrd'.
585 If unsure, leave blank
587 config ARCH_WANTS_FREEZER_CONTROL
591 source kernel/power/Kconfig
594 bool "Enable seccomp to safely compute untrusted bytecode"
598 This kernel feature is useful for number crunching applications
599 that may need to compute untrusted bytecode during their
600 execution. By using pipes or other transports made available to
601 the process as file descriptors supporting the read/write
602 syscalls, it's possible to isolate those applications in
603 their own address space using seccomp. Once seccomp is
604 enabled via /proc/<pid>/seccomp, it cannot be disabled
605 and the task is only allowed to execute a few safe syscalls
606 defined by each seccomp mode.
608 If unsure, say Y. Only embedded should say N here.
614 default !PPC_ISERIES || PCI
619 bool "Support for ISA-bus hardware"
620 depends on PPC_PREP || PPC_CHRP
623 Find out whether you have ISA slots on your motherboard. ISA is the
624 name of a bus system, i.e. the way the CPU talks to the other stuff
625 inside your box. If you have an Apple machine, say N here; if you
626 have an IBM RS/6000 or pSeries machine or a PReP machine, say Y. If
627 you have an embedded board, consult your board documentation.
633 config NEED_DMA_MAP_STATE
634 def_bool (PPC64 || NOT_COHERENT_CACHE)
636 config NEED_SG_DMA_LENGTH
639 config GENERIC_ISA_DMA
641 depends on ISA_DMA_API
644 config PPC_INDIRECT_PCI
647 default y if 40x || 44x
658 select HAVE_CAN_FLEXCAN if NET && CAN
659 select PPC_CLOCK if CAN_FLEXCAN
663 select PPC_INDIRECT_PCI
669 depends on SUSPEND && (PPC_85xx || PPC_86xx)
671 Freescale MPC85xx/MPC86xx power management controller support
672 (suspend/resume). For MPC83xx see platforms/83xx/suspend.c
677 depends on SUSPEND && (44x || 40x)
679 PPC4xx Clock Power Management (CPM) support (suspend/resume).
680 It also enables support for two different idle states (idle-wait
687 bool "Freescale Local Bus support"
690 Enables reporting of errors from the Freescale local bus
691 controller. Also contains some common code used by
692 drivers for specific local bus peripherals.
700 depends on PPC_83xx || QUICC_ENGINE || CPM2
702 Freescale General-purpose Timers support
704 # Yes MCA RS/6000s exist but Linux-PPC does not currently support any
708 # Platforms that what PCI turned unconditionally just do select PCI
709 # in their config node. Platforms that want to choose at config
710 # time should select PPC_PCI_CHOICE
711 config PPC_PCI_CHOICE
715 bool "PCI support" if PPC_PCI_CHOICE
716 default y if !40x && !CPM2 && !8xx && !PPC_83xx \
717 && !PPC_85xx && !PPC_86xx && !GAMECUBE_COMMON
718 default PCI_PERMEDIA if !4xx && !CPM2 && !8xx
719 default PCI_QSPAN if !4xx && !CPM2 && 8xx
720 select ARCH_SUPPORTS_MSI
722 Find out whether your system includes a PCI bus. PCI is the name of
723 a bus system, i.e. the way the CPU talks to the other stuff inside
724 your box. If you say Y here, the kernel will include drivers and
725 infrastructure code to support PCI bus devices.
735 depends on !4xx && !CPM2 && 8xx
738 Say Y here if you have a system based on a Motorola 8xx-series
739 embedded processor with a QSPAN PCI interface, otherwise say N.
743 depends on PCI && 8260
744 select PPC_INDIRECT_PCI
748 bool "Enable workaround for MPC826x erratum PCI 9"
749 depends on PCI_8260 && !8272
752 source "drivers/pci/pcie/Kconfig"
754 source "drivers/pci/Kconfig"
756 source "drivers/pcmcia/Kconfig"
758 source "drivers/pci/hotplug/Kconfig"
765 bool "RapidIO support"
766 depends on HAS_RAPIDIO || PCI
768 If you say Y here, the kernel will include drivers and
769 infrastructure code to support RapidIO interconnect devices.
772 bool "Freescale Embedded SRIO Controller support"
773 depends on RAPIDIO && HAS_RAPIDIO
776 Include support for RapidIO controller on Freescale embedded
777 processors (MPC8548, MPC8641, etc).
779 source "drivers/rapidio/Kconfig"
783 config NONSTATIC_KERNEL
787 menu "Advanced setup"
790 config ADVANCED_OPTIONS
791 bool "Prompt for advanced kernel configuration options"
793 This option will enable prompting for a variety of advanced kernel
794 configuration options. These options can cause the kernel to not
795 work if they are set incorrectly, but can be used to optimize certain
796 aspects of kernel memory management.
798 Unless you know what you are doing, say N here.
800 comment "Default settings for advanced configuration options are used"
801 depends on !ADVANCED_OPTIONS
803 config LOWMEM_SIZE_BOOL
804 bool "Set maximum low memory"
805 depends on ADVANCED_OPTIONS
807 This option allows you to set the maximum amount of memory which
808 will be used as "low memory", that is, memory which the kernel can
809 access directly, without having to set up a kernel virtual mapping.
810 This can be useful in optimizing the layout of kernel virtual
813 Say N here unless you know what you are doing.
816 hex "Maximum low memory size (in bytes)" if LOWMEM_SIZE_BOOL
819 config LOWMEM_CAM_NUM_BOOL
820 bool "Set number of CAMs to use to map low memory"
821 depends on ADVANCED_OPTIONS && FSL_BOOKE
823 This option allows you to set the maximum number of CAM slots that
824 will be used to map low memory. There are a limited number of slots
825 available and even more limited number that will fit in the L1 MMU.
826 However, using more entries will allow mapping more low memory. This
827 can be useful in optimizing the layout of kernel virtual memory.
829 Say N here unless you know what you are doing.
831 config LOWMEM_CAM_NUM
833 int "Number of CAMs to use to map low memory" if LOWMEM_CAM_NUM_BOOL
836 config DYNAMIC_MEMSTART
837 bool "Enable page aligned dynamic load address for kernel (EXPERIMENTAL)"
838 depends on EXPERIMENTAL && ADVANCED_OPTIONS && FLATMEM && (FSL_BOOKE || 44x)
839 select NONSTATIC_KERNEL
841 This option enables the kernel to be loaded at any page aligned
842 physical address. The kernel creates a mapping from KERNELBASE to
843 the address where the kernel is loaded. The page size here implies
844 the TLB page size of the mapping for kernel on the particular platform.
845 Please refer to the init code for finding the TLB page size.
847 DYNAMIC_MEMSTART is an easy way of implementing pseudo-RELOCATABLE
848 kernel image, where the only restriction is the page aligned kernel
849 load address. When this option is enabled, the compile time physical
850 address CONFIG_PHYSICAL_START is ignored.
852 This option is overridden by CONFIG_RELOCATABLE
855 bool "Build a relocatable kernel (EXPERIMENTAL)"
856 depends on EXPERIMENTAL && ADVANCED_OPTIONS && FLATMEM && 44x
857 select NONSTATIC_KERNEL
859 This builds a kernel image that is capable of running at the
860 location the kernel is loaded at, without any alignment restrictions.
861 This feature is a superset of DYNAMIC_MEMSTART and hence overrides it.
863 One use is for the kexec on panic case where the recovery kernel
864 must live at a different physical address than the primary
867 Note: If CONFIG_RELOCATABLE=y, then the kernel runs from the address
868 it has been loaded at and the compile time physical addresses
869 CONFIG_PHYSICAL_START is ignored. However CONFIG_PHYSICAL_START
870 setting can still be useful to bootwrappers that need to know the
871 load address of the kernel (eg. u-boot/mkimage).
873 config RELOCATABLE_PPC32
875 depends on PPC32 && RELOCATABLE
877 config PAGE_OFFSET_BOOL
878 bool "Set custom page offset address"
879 depends on ADVANCED_OPTIONS
881 This option allows you to set the kernel virtual address at which
882 the kernel will map low memory. This can be useful in optimizing
883 the virtual memory layout of the system.
885 Say N here unless you know what you are doing.
888 hex "Virtual address of memory base" if PAGE_OFFSET_BOOL
891 config KERNEL_START_BOOL
892 bool "Set custom kernel base address"
893 depends on ADVANCED_OPTIONS
895 This option allows you to set the kernel virtual address at which
896 the kernel will be loaded. Normally this should match PAGE_OFFSET
897 however there are times (like kdump) that one might not want them
900 Say N here unless you know what you are doing.
903 hex "Virtual address of kernel base" if KERNEL_START_BOOL
904 default PAGE_OFFSET if PAGE_OFFSET_BOOL
905 default "0xc2000000" if CRASH_DUMP && !NONSTATIC_KERNEL
908 config PHYSICAL_START_BOOL
909 bool "Set physical address where the kernel is loaded"
910 depends on ADVANCED_OPTIONS && FLATMEM && FSL_BOOKE
912 This gives the physical address where the kernel is loaded.
914 Say N here unless you know what you are doing.
916 config PHYSICAL_START
917 hex "Physical address where the kernel is loaded" if PHYSICAL_START_BOOL
918 default "0x02000000" if PPC_STD_MMU && CRASH_DUMP && !NONSTATIC_KERNEL
921 config PHYSICAL_ALIGN
923 default "0x04000000" if FSL_BOOKE
925 This value puts the alignment restrictions on physical address
926 where kernel is loaded and run from. Kernel is compiled for an
927 address which meets above alignment restriction.
929 config TASK_SIZE_BOOL
930 bool "Set custom user task size"
931 depends on ADVANCED_OPTIONS
933 This option allows you to set the amount of virtual address space
934 allocated to user tasks. This can be useful in optimizing the
935 virtual memory layout of the system.
937 Say N here unless you know what you are doing.
940 hex "Size of user task space" if TASK_SIZE_BOOL
941 default "0x80000000" if PPC_PREP || PPC_8xx
944 config CONSISTENT_SIZE_BOOL
945 bool "Set custom consistent memory pool size"
946 depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
948 This option allows you to set the size of the
949 consistent memory pool. This pool of virtual memory
950 is used to make consistent memory allocations.
952 config CONSISTENT_SIZE
953 hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL
954 default "0x00200000" if NOT_COHERENT_CACHE
957 bool "Pinned Kernel TLBs (860 ONLY)"
958 depends on ADVANCED_OPTIONS && 8xx
963 bool "Build a relocatable kernel"
964 select NONSTATIC_KERNEL
966 This builds a kernel image that is capable of running anywhere
967 in the RMA (real memory area) at any 16k-aligned base address.
968 The kernel is linked as a position-independent executable (PIE)
969 and contains dynamic relocations which are processed early
970 in the bootup process.
972 One use is for the kexec on panic case where the recovery kernel
973 must live at a different physical address than the primary
978 default "0xc000000000000000"
981 default "0xc000000000000000"
982 config PHYSICAL_START
989 source "drivers/Kconfig"
993 source "arch/powerpc/sysdev/qe_lib/Kconfig"
997 source "arch/powerpc/Kconfig.debug"
999 source "security/Kconfig"
1003 depends on COMPAT && KEYS
1006 source "crypto/Kconfig"
1013 config PPC_LIB_RHEAP
1016 source "arch/powerpc/kvm/Kconfig"