arch/mips/kernel/cpu-probe.c

   1 /*
   2  * Processor capabilities determination functions.
   3  *
   4  * Copyright (C) xxxx  the Anonymous
   5  * Copyright (C) 1994 - 2006 Ralf Baechle
   6  * Copyright (C) 2003, 2004  Maciej W. Rozycki
   7  * Copyright (C) 2001, 2004  MIPS Inc.
   8  *
   9  * This program is free software; you can redistribute it and/or
  10  * modify it under the terms of the GNU General Public License
  11  * as published by the Free Software Foundation; either version
  12  * 2 of the License, or (at your option) any later version.
  13  */
  14 #include <linux/init.h>
  15 #include <linux/kernel.h>
  16 #include <linux/ptrace.h>
  17 #include <linux/smp.h>
  18 #include <linux/stddef.h>
  19
  20 #include <asm/bugs.h>
  21 #include <asm/cpu.h>
  22 #include <asm/fpu.h>
  23 #include <asm/mipsregs.h>
  24 #include <asm/system.h>
  25 #include <asm/watch.h>
  26 #include <asm/spram.h>
  27 /*
  28  * Not all of the MIPS CPUs have the "wait" instruction available. Moreover,
  29  * the implementation of the "wait" feature differs between CPU families. This
  30  * points to the function that implements CPU specific wait.
  31  * The wait instruction stops the pipeline and reduces the power consumption of
  32  * the CPU very much.
  33  */
  34 void (*cpu_wait)(void);
  35
  36 static void r3081_wait(void)
  37 {
  38         unsigned long cfg = read_c0_conf();
  39         write_c0_conf(cfg | R30XX_CONF_HALT);
  40 }
  41
  42 static void r39xx_wait(void)
  43 {
  44         local_irq_disable();
  45         if (!need_resched())
  46                 write_c0_conf(read_c0_conf() | TX39_CONF_HALT);
  47         local_irq_enable();
  48 }
  49
  50 extern void r4k_wait(void);
  51
  52 /*
  53  * This variant is preferable as it allows testing need_resched and going to
  54  * sleep depending on the outcome atomically.  Unfortunately the "It is
  55  * implementation-dependent whether the pipeline restarts when a non-enabled
  56  * interrupt is requested" restriction in the MIPS32/MIPS64 architecture makes
  57  * using this version a gamble.
  58  */
  59 void r4k_wait_irqoff(void)
  60 {
  61         local_irq_disable();
  62         if (!need_resched())
  63                 __asm__("       .set    push            \n"
  64                         "       .set    mips3           \n"
  65                         "       wait                    \n"
  66                         "       .set    pop             \n");
  67         local_irq_enable();
  68         __asm__("       .globl __pastwait       \n"
  69                 "__pastwait:                    \n");
  70         return;
  71 }
  72
  73 /*
  74  * The RM7000 variant has to handle erratum 38.  The workaround is to not
  75  * have any pending stores when the WAIT instruction is executed.
  76  */
  77 static void rm7k_wait_irqoff(void)
  78 {
  79         local_irq_disable();
  80         if (!need_resched())
  81                 __asm__(
  82                 "       .set    push                                    \n"
  83                 "       .set    mips3                                   \n"
  84                 "       .set    noat                                    \n"
  85                 "       mfc0    $1, $12                                 \n"
  86                 "       sync                                            \n"
  87                 "       mtc0    $1, $12         # stalls until W stage  \n"
  88                 "       wait                                            \n"
  89                 "       mtc0    $1, $12         # stalls until W stage  \n"
  90                 "       .set    pop                                     \n");
  91         local_irq_enable();
  92 }
  93
  94 /*
  95  * The Au1xxx wait is available only if using 32khz counter or
  96  * external timer source, but specifically not CP0 Counter.
  97  * alchemy/common/time.c may override cpu_wait!
  98  */
  99 static void au1k_wait(void)
 100 {
 101         __asm__("       .set    mips3                   \n"
 102                 "       cache   0x14, 0(%0)             \n"
 103                 "       cache   0x14, 32(%0)            \n"
 104                 "       sync                            \n"
 105                 "       nop                             \n"
 106                 "       wait                            \n"
 107                 "       nop                             \n"
 108                 "       nop                             \n"
 109                 "       nop                             \n"
 110                 "       nop                             \n"
 111                 "       .set    mips0                   \n"
 112                 : : "r" (au1k_wait));
 113 }
 114
 115 static int __initdata nowait;
 116
 117 static int __init wait_disable(char *s)
 118 {
 119         nowait = 1;
 120
 121         return 1;
 122 }
 123
 124 __setup("nowait", wait_disable);
 125
 126 void __init check_wait(void)
 127 {
 128         struct cpuinfo_mips *c = &current_cpu_data;
 129
 130         if (nowait) {
 131                 printk("Wait instruction disabled.\n");
 132                 return;
 133         }
 134
 135         switch (c->cputype) {
 136         case CPU_R3081:
 137         case CPU_R3081E:
 138                 cpu_wait = r3081_wait;
 139                 break;
 140         case CPU_TX3927:
 141                 cpu_wait = r39xx_wait;
 142                 break;
 143         case CPU_R4200:
 144 /*      case CPU_R4300: */
 145         case CPU_R4600:
 146         case CPU_R4640:
 147         case CPU_R4650:
 148         case CPU_R4700:
 149         case CPU_R5000:
 150         case CPU_R5500:
 151         case CPU_NEVADA:
 152         case CPU_4KC:
 153         case CPU_4KEC:
 154         case CPU_4KSC:
 155         case CPU_5KC:
 156         case CPU_25KF:
 157         case CPU_PR4450:
 158         case CPU_BCM3302:
 159         case CPU_BCM6338:
 160         case CPU_BCM6348:
 161         case CPU_BCM6358:
 162         case CPU_CAVIUM_OCTEON:
 163                 cpu_wait = r4k_wait;
 164                 break;
 165
 166         case CPU_RM7000:
 167                 cpu_wait = rm7k_wait_irqoff;
 168                 break;
 169
 170         case CPU_24K:
 171         case CPU_34K:
 172         case CPU_1004K:
 173                 cpu_wait = r4k_wait;
 174                 if (read_c0_config7() & MIPS_CONF7_WII)
 175                         cpu_wait = r4k_wait_irqoff;
 176                 break;
 177
 178         case CPU_74K:
 179                 cpu_wait = r4k_wait;
 180                 if ((c->processor_id & 0xff) >= PRID_REV_ENCODE_332(2, 1, 0))
 181                         cpu_wait = r4k_wait_irqoff;
 182                 break;
 183
 184         case CPU_TX49XX:
 185                 cpu_wait = r4k_wait_irqoff;
 186                 break;
 187         case CPU_ALCHEMY:
 188                 cpu_wait = au1k_wait;
 189                 break;
 190         case CPU_20KC:
 191                 /*
 192                  * WAIT on Rev1.0 has E1, E2, E3 and E16.
 193                  * WAIT on Rev2.0 and Rev3.0 has E16.
 194                  * Rev3.1 WAIT is nop, why bother
 195                  */
 196                 if ((c->processor_id & 0xff) <= 0x64)
 197                         break;
 198
 199                 /*
 200                  * Another rev is incremeting c0_count at a reduced clock
 201                  * rate while in WAIT mode.  So we basically have the choice
 202                  * between using the cp0 timer as clocksource or avoiding
 203                  * the WAIT instruction.  Until more details are known,
 204                  * disable the use of WAIT for 20Kc entirely.
 205                    cpu_wait = r4k_wait;
 206                  */
 207                 break;
 208         case CPU_RM9000:
 209                 if ((c->processor_id & 0x00ff) >= 0x40)
 210                         cpu_wait = r4k_wait;
 211                 break;
 212         default:
 213                 break;
 214         }
 215 }
 216
 217 static inline void check_errata(void)
 218 {
 219         struct cpuinfo_mips *c = &current_cpu_data;
 220
 221         switch (c->cputype) {
 222         case CPU_34K:
 223                 /*
 224                  * Erratum "RPS May Cause Incorrect Instruction Execution"
 225                  * This code only handles VPE0, any SMP/SMTC/RTOS code
 226                  * making use of VPE1 will be responsable for that VPE.
 227                  */
 228                 if ((c->processor_id & PRID_REV_MASK) <= PRID_REV_34K_V1_0_2)
 229                         write_c0_config7(read_c0_config7() | MIPS_CONF7_RPS);
 230                 break;
 231         default:
 232                 break;
 233         }
 234 }
 235
 236 void __init check_bugs32(void)
 237 {
 238         check_errata();
 239 }
 240
 241 /*
 242  * Probe whether cpu has config register by trying to play with
 243  * alternate cache bit and see whether it matters.
 244  * It's used by cpu_probe to distinguish between R3000A and R3081.
 245  */
 246 static inline int cpu_has_confreg(void)
 247 {
 248 #ifdef CONFIG_CPU_R3000
 249         extern unsigned long r3k_cache_size(unsigned long);
 250         unsigned long size1, size2;
 251         unsigned long cfg = read_c0_conf();
 252
 253         size1 = r3k_cache_size(ST0_ISC);
 254         write_c0_conf(cfg ^ R30XX_CONF_AC);
 255         size2 = r3k_cache_size(ST0_ISC);
 256         write_c0_conf(cfg);
 257         return size1 != size2;
 258 #else
 259         return 0;
 260 #endif
 261 }
 262
 263 /*
 264  * Get the FPU Implementation/Revision.
 265  */
 266 static inline unsigned long cpu_get_fpu_id(void)
 267 {
 268         unsigned long tmp, fpu_id;
 269
 270         tmp = read_c0_status();
 271         __enable_fpu();
 272         fpu_id = read_32bit_cp1_register(CP1_REVISION);
 273         write_c0_status(tmp);
 274         return fpu_id;
 275 }
 276
 277 /*
 278  * Check the CPU has an FPU the official way.
 279  */
 280 static inline int __cpu_has_fpu(void)
 281 {
 282         return ((cpu_get_fpu_id() & 0xff00) != FPIR_IMP_NONE);
 283 }
 284
 285 #define R4K_OPTS (MIPS_CPU_TLB | MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE \
 286                 | MIPS_CPU_COUNTER)
 287
 288 static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 289 {
 290         switch (c->processor_id & 0xff00) {
 291         case PRID_IMP_R2000:
 292                 c->cputype = CPU_R2000;
 293                 __cpu_name[cpu] = "R2000";
 294                 c->isa_level = MIPS_CPU_ISA_I;
 295                 c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE |
 296                              MIPS_CPU_NOFPUEX;
 297                 if (__cpu_has_fpu())
 298                         c->options |= MIPS_CPU_FPU;
 299                 c->tlbsize = 64;
 300                 break;
 301         case PRID_IMP_R3000:
 302                 if ((c->processor_id & 0xff) == PRID_REV_R3000A) {
 303                         if (cpu_has_confreg()) {
 304                                 c->cputype = CPU_R3081E;
 305                                 __cpu_name[cpu] = "R3081";
 306                         } else {
 307                                 c->cputype = CPU_R3000A;
 308                                 __cpu_name[cpu] = "R3000A";
 309                         }
 310                         break;
 311                 } else {
 312                         c->cputype = CPU_R3000;
 313                         __cpu_name[cpu] = "R3000";
 314                 }
 315                 c->isa_level = MIPS_CPU_ISA_I;
 316                 c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE |
 317                              MIPS_CPU_NOFPUEX;
 318                 if (__cpu_has_fpu())
 319                         c->options |= MIPS_CPU_FPU;
 320                 c->tlbsize = 64;
 321                 break;
 322         case PRID_IMP_R4000:
 323                 if (read_c0_config() & CONF_SC) {
 324                         if ((c->processor_id & 0xff) >= PRID_REV_R4400) {
 325                                 c->cputype = CPU_R4400PC;
 326                                 __cpu_name[cpu] = "R4400PC";
 327                         } else {
 328                                 c->cputype = CPU_R4000PC;
 329                                 __cpu_name[cpu] = "R4000PC";
 330                         }
 331                 } else {
 332                         if ((c->processor_id & 0xff) >= PRID_REV_R4400) {
 333                                 c->cputype = CPU_R4400SC;
 334                                 __cpu_name[cpu] = "R4400SC";
 335                         } else {
 336                                 c->cputype = CPU_R4000SC;
 337                                 __cpu_name[cpu] = "R4000SC";
 338                         }
 339                 }
 340
 341                 c->isa_level = MIPS_CPU_ISA_III;
 342                 c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
 343                              MIPS_CPU_WATCH | MIPS_CPU_VCE |
 344                              MIPS_CPU_LLSC;
 345                 c->tlbsize = 48;
 346                 break;
 347         case PRID_IMP_VR41XX:
 348                 switch (c->processor_id & 0xf0) {
 349                 case PRID_REV_VR4111:
 350                         c->cputype = CPU_VR4111;
 351                         __cpu_name[cpu] = "NEC VR4111";
 352                         break;
 353                 case PRID_REV_VR4121:
 354                         c->cputype = CPU_VR4121;
 355                         __cpu_name[cpu] = "NEC VR4121";
 356                         break;
 357                 case PRID_REV_VR4122:
 358                         if ((c->processor_id & 0xf) < 0x3) {
 359                                 c->cputype = CPU_VR4122;
 360                                 __cpu_name[cpu] = "NEC VR4122";
 361                         } else {
 362                                 c->cputype = CPU_VR4181A;
 363                                 __cpu_name[cpu] = "NEC VR4181A";
 364                         }
 365                         break;
 366                 case PRID_REV_VR4130:
 367                         if ((c->processor_id & 0xf) < 0x4) {
 368                                 c->cputype = CPU_VR4131;
 369                                 __cpu_name[cpu] = "NEC VR4131";
 370                         } else {
 371                                 c->cputype = CPU_VR4133;
 372                                 __cpu_name[cpu] = "NEC VR4133";
 373                         }
 374                         break;
 375                 default:
 376                         printk(KERN_INFO "Unexpected CPU of NEC VR4100 series\n");
 377                         c->cputype = CPU_VR41XX;
 378                         __cpu_name[cpu] = "NEC Vr41xx";
 379                         break;
 380                 }
 381                 c->isa_level = MIPS_CPU_ISA_III;
 382                 c->options = R4K_OPTS;
 383                 c->tlbsize = 32;
 384                 break;
 385         case PRID_IMP_R4300:
 386                 c->cputype = CPU_R4300;
 387                 __cpu_name[cpu] = "R4300";
 388                 c->isa_level = MIPS_CPU_ISA_III;
 389                 c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
 390                              MIPS_CPU_LLSC;
 391                 c->tlbsize = 32;
 392                 break;
 393         case PRID_IMP_R4600:
 394                 c->cputype = CPU_R4600;
 395                 __cpu_name[cpu] = "R4600";
 396                 c->isa_level = MIPS_CPU_ISA_III;
 397                 c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
 398                              MIPS_CPU_LLSC;
 399                 c->tlbsize = 48;
 400                 break;
 401         #if 0
 402         case PRID_IMP_R4650:
 403                 /*
 404                  * This processor doesn't have an MMU, so it's not
 405                  * "real easy" to run Linux on it. It is left purely
 406                  * for documentation.  Commented out because it shares
 407                  * it's c0_prid id number with the TX3900.
 408                  */
 409                 c->cputype = CPU_R4650;
 410                 __cpu_name[cpu] = "R4650";
 411                 c->isa_level = MIPS_CPU_ISA_III;
 412                 c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_LLSC;
 413                 c->tlbsize = 48;
 414                 break;
 415         #endif
 416         case PRID_IMP_TX39:
 417                 c->isa_level = MIPS_CPU_ISA_I;
 418                 c->options = MIPS_CPU_TLB | MIPS_CPU_TX39_CACHE;
 419
 420                 if ((c->processor_id & 0xf0) == (PRID_REV_TX3927 & 0xf0)) {
 421                         c->cputype = CPU_TX3927;
 422                         __cpu_name[cpu] = "TX3927";
 423                         c->tlbsize = 64;
 424                 } else {
 425                         switch (c->processor_id & 0xff) {
 426                         case PRID_REV_TX3912:
 427                                 c->cputype = CPU_TX3912;
 428                                 __cpu_name[cpu] = "TX3912";
 429                                 c->tlbsize = 32;
 430                                 break;
 431                         case PRID_REV_TX3922:
 432                                 c->cputype = CPU_TX3922;
 433                                 __cpu_name[cpu] = "TX3922";
 434                                 c->tlbsize = 64;
 435                                 break;
 436                         }
 437                 }
 438                 break;
 439         case PRID_IMP_R4700:
 440                 c->cputype = CPU_R4700;
 441                 __cpu_name[cpu] = "R4700";
 442                 c->isa_level = MIPS_CPU_ISA_III;
 443                 c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
 444                              MIPS_CPU_LLSC;
 445                 c->tlbsize = 48;
 446                 break;
 447         case PRID_IMP_TX49:
 448                 c->cputype = CPU_TX49XX;
 449                 __cpu_name[cpu] = "R49XX";
 450                 c->isa_level = MIPS_CPU_ISA_III;
 451                 c->options = R4K_OPTS | MIPS_CPU_LLSC;
 452                 if (!(c->processor_id & 0x08))
 453                         c->options |= MIPS_CPU_FPU | MIPS_CPU_32FPR;
 454                 c->tlbsize = 48;
 455                 break;
 456         case PRID_IMP_R5000:
 457                 c->cputype = CPU_R5000;
 458                 __cpu_name[cpu] = "R5000";
 459                 c->isa_level = MIPS_CPU_ISA_IV;
 460                 c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
 461                              MIPS_CPU_LLSC;
 462                 c->tlbsize = 48;
 463                 break;
 464         case PRID_IMP_R5432:
 465                 c->cputype = CPU_R5432;
 466                 __cpu_name[cpu] = "R5432";
 467                 c->isa_level = MIPS_CPU_ISA_IV;
 468                 c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
 469                              MIPS_CPU_WATCH | MIPS_CPU_LLSC;
 470                 c->tlbsize = 48;
 471                 break;
 472         case PRID_IMP_R5500:
 473                 c->cputype = CPU_R5500;
 474                 __cpu_name[cpu] = "R5500";
 475                 c->isa_level = MIPS_CPU_ISA_IV;
 476                 c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
 477                              MIPS_CPU_WATCH | MIPS_CPU_LLSC;
 478                 c->tlbsize = 48;
 479                 break;
 480         case PRID_IMP_NEVADA:
 481                 c->cputype = CPU_NEVADA;
 482                 __cpu_name[cpu] = "Nevada";
 483                 c->isa_level = MIPS_CPU_ISA_IV;
 484                 c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
 485                              MIPS_CPU_DIVEC | MIPS_CPU_LLSC;
 486                 c->tlbsize = 48;
 487                 break;
 488         case PRID_IMP_R6000:
 489                 c->cputype = CPU_R6000;
 490                 __cpu_name[cpu] = "R6000";
 491                 c->isa_level = MIPS_CPU_ISA_II;
 492                 c->options = MIPS_CPU_TLB | MIPS_CPU_FPU |
 493                              MIPS_CPU_LLSC;
 494                 c->tlbsize = 32;
 495                 break;
 496         case PRID_IMP_R6000A:
 497                 c->cputype = CPU_R6000A;
 498                 __cpu_name[cpu] = "R6000A";
 499                 c->isa_level = MIPS_CPU_ISA_II;
 500                 c->options = MIPS_CPU_TLB | MIPS_CPU_FPU |
 501                              MIPS_CPU_LLSC;
 502                 c->tlbsize = 32;
 503                 break;
 504         case PRID_IMP_RM7000:
 505                 c->cputype = CPU_RM7000;
 506                 __cpu_name[cpu] = "RM7000";
 507                 c->isa_level = MIPS_CPU_ISA_IV;
 508                 c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
 509                              MIPS_CPU_LLSC;
 510                 /*
 511                  * Undocumented RM7000:  Bit 29 in the info register of
 512                  * the RM7000 v2.0 indicates if the TLB has 48 or 64
 513                  * entries.
 514                  *
 515                  * 29      1 =>    64 entry JTLB
 516                  *         0 =>    48 entry JTLB
 517                  */
 518                 c->tlbsize = (read_c0_info() & (1 << 29)) ? 64 : 48;
 519                 break;
 520         case PRID_IMP_RM9000:
 521                 c->cputype = CPU_RM9000;
 522                 __cpu_name[cpu] = "RM9000";
 523                 c->isa_level = MIPS_CPU_ISA_IV;
 524                 c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
 525                              MIPS_CPU_LLSC;
 526                 /*
 527                  * Bit 29 in the info register of the RM9000
 528                  * indicates if the TLB has 48 or 64 entries.
 529                  *
 530                  * 29      1 =>    64 entry JTLB
 531                  *         0 =>    48 entry JTLB
 532                  */
 533                 c->tlbsize = (read_c0_info() & (1 << 29)) ? 64 : 48;
 534                 break;
 535         case PRID_IMP_R8000:
 536                 c->cputype = CPU_R8000;
 537                 __cpu_name[cpu] = "RM8000";
 538                 c->isa_level = MIPS_CPU_ISA_IV;
 539                 c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX |
 540                              MIPS_CPU_FPU | MIPS_CPU_32FPR |
 541                              MIPS_CPU_LLSC;
 542                 c->tlbsize = 384;      /* has weird TLB: 3-way x 128 */
 543                 break;
 544         case PRID_IMP_R10000:
 545                 c->cputype = CPU_R10000;
 546                 __cpu_name[cpu] = "R10000";
 547                 c->isa_level = MIPS_CPU_ISA_IV;
 548                 c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
 549                              MIPS_CPU_FPU | MIPS_CPU_32FPR |
 550                              MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
 551                              MIPS_CPU_LLSC;
 552                 c->tlbsize = 64;
 553                 break;
 554         case PRID_IMP_R12000:
 555                 c->cputype = CPU_R12000;
 556                 __cpu_name[cpu] = "R12000";
 557                 c->isa_level = MIPS_CPU_ISA_IV;
 558                 c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
 559                              MIPS_CPU_FPU | MIPS_CPU_32FPR |
 560                              MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
 561                              MIPS_CPU_LLSC;
 562                 c->tlbsize = 64;
 563                 break;
 564         case PRID_IMP_R14000:
 565                 c->cputype = CPU_R14000;
 566                 __cpu_name[cpu] = "R14000";
 567                 c->isa_level = MIPS_CPU_ISA_IV;
 568                 c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
 569                              MIPS_CPU_FPU | MIPS_CPU_32FPR |
 570                              MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
 571                              MIPS_CPU_LLSC;
 572                 c->tlbsize = 64;
 573                 break;
 574         case PRID_IMP_LOONGSON2:
 575                 c->cputype = CPU_LOONGSON2;
 576                 __cpu_name[cpu] = "ICT Loongson-2";
 577                 c->isa_level = MIPS_CPU_ISA_III;
 578                 c->options = R4K_OPTS |
 579                              MIPS_CPU_FPU | MIPS_CPU_LLSC |
 580                              MIPS_CPU_32FPR;
 581                 c->tlbsize = 64;
 582                 break;
 583         }
 584 }
 585
 586 static char unknown_isa[] __cpuinitdata = KERN_ERR \
 587         "Unsupported ISA type, c0.config0: %d.";
 588
 589 static inline unsigned int decode_config0(struct cpuinfo_mips *c)
 590 {
 591         unsigned int config0;
 592         int isa;
 593
 594         config0 = read_c0_config();
 595
 596         if (((config0 & MIPS_CONF_MT) >> 7) == 1)
 597                 c->options |= MIPS_CPU_TLB;
 598         isa = (config0 & MIPS_CONF_AT) >> 13;
 599         switch (isa) {
 600         case 0:
 601                 switch ((config0 & MIPS_CONF_AR) >> 10) {
 602                 case 0:
 603                         c->isa_level = MIPS_CPU_ISA_M32R1;
 604                         break;
 605                 case 1:
 606                         c->isa_level = MIPS_CPU_ISA_M32R2;
 607                         break;
 608                 default:
 609                         goto unknown;
 610                 }
 611                 break;
 612         case 2:
 613                 switch ((config0 & MIPS_CONF_AR) >> 10) {
 614                 case 0:
 615                         c->isa_level = MIPS_CPU_ISA_M64R1;
 616                         break;
 617                 case 1:
 618                         c->isa_level = MIPS_CPU_ISA_M64R2;
 619                         break;
 620                 default:
 621                         goto unknown;
 622                 }
 623                 break;
 624         default:
 625                 goto unknown;
 626         }
 627
 628         return config0 & MIPS_CONF_M;
 629
 630 unknown:
 631         panic(unknown_isa, config0);
 632 }
 633
 634 static inline unsigned int decode_config1(struct cpuinfo_mips *c)
 635 {
 636         unsigned int config1;
 637
 638         config1 = read_c0_config1();
 639
 640         if (config1 & MIPS_CONF1_MD)
 641                 c->ases |= MIPS_ASE_MDMX;
 642         if (config1 & MIPS_CONF1_WR)
 643                 c->options |= MIPS_CPU_WATCH;
 644         if (config1 & MIPS_CONF1_CA)
 645                 c->ases |= MIPS_ASE_MIPS16;
 646         if (config1 & MIPS_CONF1_EP)
 647                 c->options |= MIPS_CPU_EJTAG;
 648         if (config1 & MIPS_CONF1_FP) {
 649                 c->options |= MIPS_CPU_FPU;
 650                 c->options |= MIPS_CPU_32FPR;
 651         }
 652         if (cpu_has_tlb)
 653                 c->tlbsize = ((config1 & MIPS_CONF1_TLBS) >> 25) + 1;
 654
 655         return config1 & MIPS_CONF_M;
 656 }
 657
 658 static inline unsigned int decode_config2(struct cpuinfo_mips *c)
 659 {
 660         unsigned int config2;
 661
 662         config2 = read_c0_config2();
 663
 664         if (config2 & MIPS_CONF2_SL)
 665                 c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT;
 666
 667         return config2 & MIPS_CONF_M;
 668 }
 669
 670 static inline unsigned int decode_config3(struct cpuinfo_mips *c)
 671 {
 672         unsigned int config3;
 673
 674         config3 = read_c0_config3();
 675
 676         if (config3 & MIPS_CONF3_SM)
 677                 c->ases |= MIPS_ASE_SMARTMIPS;
 678         if (config3 & MIPS_CONF3_DSP)
 679                 c->ases |= MIPS_ASE_DSP;
 680         if (config3 & MIPS_CONF3_VINT)
 681                 c->options |= MIPS_CPU_VINT;
 682         if (config3 & MIPS_CONF3_VEIC)
 683                 c->options |= MIPS_CPU_VEIC;
 684         if (config3 & MIPS_CONF3_MT)
 685                 c->ases |= MIPS_ASE_MIPSMT;
 686         if (config3 & MIPS_CONF3_ULRI)
 687                 c->options |= MIPS_CPU_ULRI;
 688
 689         return config3 & MIPS_CONF_M;
 690 }
 691
 692 static void __cpuinit decode_configs(struct cpuinfo_mips *c)
 693 {
 694         int ok;
 695
 696         /* MIPS32 or MIPS64 compliant CPU.  */
 697         c->options = MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE | MIPS_CPU_COUNTER |
 698                      MIPS_CPU_DIVEC | MIPS_CPU_LLSC | MIPS_CPU_MCHECK;
 699
 700         c->scache.flags = MIPS_CACHE_NOT_PRESENT;
 701
 702         ok = decode_config0(c);                 /* Read Config registers.  */
 703         BUG_ON(!ok);                            /* Arch spec violation!  */
 704         if (ok)
 705                 ok = decode_config1(c);
 706         if (ok)
 707                 ok = decode_config2(c);
 708         if (ok)
 709                 ok = decode_config3(c);
 710
 711         mips_probe_watch_registers(c);
 712 }
 713
 714 static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu)
 715 {
 716         decode_configs(c);
 717         switch (c->processor_id & 0xff00) {
 718         case PRID_IMP_4KC:
 719                 c->cputype = CPU_4KC;
 720                 __cpu_name[cpu] = "MIPS 4Kc";
 721                 break;
 722         case PRID_IMP_4KEC:
 723                 c->cputype = CPU_4KEC;
 724                 __cpu_name[cpu] = "MIPS 4KEc";
 725                 break;
 726         case PRID_IMP_4KECR2:
 727                 c->cputype = CPU_4KEC;
 728                 __cpu_name[cpu] = "MIPS 4KEc";
 729                 break;
 730         case PRID_IMP_4KSC:
 731         case PRID_IMP_4KSD:
 732                 c->cputype = CPU_4KSC;
 733                 __cpu_name[cpu] = "MIPS 4KSc";
 734                 break;
 735         case PRID_IMP_5KC:
 736                 c->cputype = CPU_5KC;
 737                 __cpu_name[cpu] = "MIPS 5Kc";
 738                 break;
 739         case PRID_IMP_20KC:
 740                 c->cputype = CPU_20KC;
 741                 __cpu_name[cpu] = "MIPS 20Kc";
 742                 break;
 743         case PRID_IMP_24K:
 744         case PRID_IMP_24KE:
 745                 c->cputype = CPU_24K;
 746                 __cpu_name[cpu] = "MIPS 24Kc";
 747                 break;
 748         case PRID_IMP_25KF:
 749                 c->cputype = CPU_25KF;
 750                 __cpu_name[cpu] = "MIPS 25Kc";
 751                 break;
 752         case PRID_IMP_34K:
 753                 c->cputype = CPU_34K;
 754                 __cpu_name[cpu] = "MIPS 34Kc";
 755                 break;
 756         case PRID_IMP_74K:
 757                 c->cputype = CPU_74K;
 758                 __cpu_name[cpu] = "MIPS 74Kc";
 759                 break;
 760         case PRID_IMP_1004K:
 761                 c->cputype = CPU_1004K;
 762                 __cpu_name[cpu] = "MIPS 1004Kc";
 763                 break;
 764         }
 765
 766         spram_config();
 767 }
 768
 769 static inline void cpu_probe_alchemy(struct cpuinfo_mips *c, unsigned int cpu)
 770 {
 771         decode_configs(c);
 772         switch (c->processor_id & 0xff00) {
 773         case PRID_IMP_AU1_REV1:
 774         case PRID_IMP_AU1_REV2:
 775                 c->cputype = CPU_ALCHEMY;
 776                 switch ((c->processor_id >> 24) & 0xff) {
 777                 case 0:
 778                         __cpu_name[cpu] = "Au1000";
 779                         break;
 780                 case 1:
 781                         __cpu_name[cpu] = "Au1500";
 782                         break;
 783                 case 2:
 784                         __cpu_name[cpu] = "Au1100";
 785                         break;
 786                 case 3:
 787                         __cpu_name[cpu] = "Au1550";
 788                         break;
 789                 case 4:
 790                         __cpu_name[cpu] = "Au1200";
 791                         if ((c->processor_id & 0xff) == 2)
 792                                 __cpu_name[cpu] = "Au1250";
 793                         break;
 794                 case 5:
 795                         __cpu_name[cpu] = "Au1210";
 796                         break;
 797                 default:
 798                         __cpu_name[cpu] = "Au1xxx";
 799                         break;
 800                 }
 801                 break;
 802         }
 803 }
 804
 805 static inline void cpu_probe_sibyte(struct cpuinfo_mips *c, unsigned int cpu)
 806 {
 807         decode_configs(c);
 808
 809         switch (c->processor_id & 0xff00) {
 810         case PRID_IMP_SB1:
 811                 c->cputype = CPU_SB1;
 812                 __cpu_name[cpu] = "SiByte SB1";
 813                 /* FPU in pass1 is known to have issues. */
 814                 if ((c->processor_id & 0xff) < 0x02)
 815                         c->options &= ~(MIPS_CPU_FPU | MIPS_CPU_32FPR);
 816                 break;
 817         case PRID_IMP_SB1A:
 818                 c->cputype = CPU_SB1A;
 819                 __cpu_name[cpu] = "SiByte SB1A";
 820                 break;
 821         }
 822 }
 823
 824 static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c, unsigned int cpu)
 825 {
 826         decode_configs(c);
 827         switch (c->processor_id & 0xff00) {
 828         case PRID_IMP_SR71000:
 829                 c->cputype = CPU_SR71000;
 830                 __cpu_name[cpu] = "Sandcraft SR71000";
 831                 c->scache.ways = 8;
 832                 c->tlbsize = 64;
 833                 break;
 834         }
 835 }
 836
 837 static inline void cpu_probe_nxp(struct cpuinfo_mips *c, unsigned int cpu)
 838 {
 839         decode_configs(c);
 840         switch (c->processor_id & 0xff00) {
 841         case PRID_IMP_PR4450:
 842                 c->cputype = CPU_PR4450;
 843                 __cpu_name[cpu] = "Philips PR4450";
 844                 c->isa_level = MIPS_CPU_ISA_M32R1;
 845                 break;
 846         }
 847 }
 848
 849 static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu)
 850 {
 851         decode_configs(c);
 852         switch (c->processor_id & 0xff00) {
 853         case PRID_IMP_BCM3302:
 854          /* same as PRID_IMP_BCM6338 */
 855                 c->cputype = CPU_BCM3302;
 856                 __cpu_name[cpu] = "Broadcom BCM3302";
 857                 break;
 858         case PRID_IMP_BCM4710:
 859                 c->cputype = CPU_BCM4710;
 860                 __cpu_name[cpu] = "Broadcom BCM4710";
 861                 break;
 862         case PRID_IMP_BCM6345:
 863                 c->cputype = CPU_BCM6345;
 864                 __cpu_name[cpu] = "Broadcom BCM6345";
 865                 break;
 866         case PRID_IMP_BCM6348:
 867                 c->cputype = CPU_BCM6348;
 868                 __cpu_name[cpu] = "Broadcom BCM6348";
 869                 break;
 870         case PRID_IMP_BCM4350:
 871                 switch (c->processor_id & 0xf0) {
 872                 case PRID_REV_BCM6358:
 873                         c->cputype = CPU_BCM6358;
 874                         __cpu_name[cpu] = "Broadcom BCM6358";
 875                         break;
 876                 default:
 877                         c->cputype = CPU_UNKNOWN;
 878                         break;
 879                 }
 880                 break;
 881         }
 882 }
 883
 884 static inline void cpu_probe_cavium(struct cpuinfo_mips *c, unsigned int cpu)
 885 {
 886         decode_configs(c);
 887         switch (c->processor_id & 0xff00) {
 888         case PRID_IMP_CAVIUM_CN38XX:
 889         case PRID_IMP_CAVIUM_CN31XX:
 890         case PRID_IMP_CAVIUM_CN30XX:
 891         case PRID_IMP_CAVIUM_CN58XX:
 892         case PRID_IMP_CAVIUM_CN56XX:
 893         case PRID_IMP_CAVIUM_CN50XX:
 894         case PRID_IMP_CAVIUM_CN52XX:
 895                 c->cputype = CPU_CAVIUM_OCTEON;
 896                 __cpu_name[cpu] = "Cavium Octeon";
 897                 break;
 898         default:
 899                 printk(KERN_INFO "Unknown Octeon chip!\n");
 900                 c->cputype = CPU_UNKNOWN;
 901                 break;
 902         }
 903 }
 904
 905 const char *__cpu_name[NR_CPUS];
 906
 907 __cpuinit void cpu_probe(void)
 908 {
 909         struct cpuinfo_mips *c = &current_cpu_data;
 910         unsigned int cpu = smp_processor_id();
 911
 912         c->processor_id = PRID_IMP_UNKNOWN;
 913         c->fpu_id       = FPIR_IMP_NONE;
 914         c->cputype      = CPU_UNKNOWN;
 915
 916         c->processor_id = read_c0_prid();
 917         switch (c->processor_id & 0xff0000) {
 918         case PRID_COMP_LEGACY:
 919                 cpu_probe_legacy(c, cpu);
 920                 break;
 921         case PRID_COMP_MIPS:
 922                 cpu_probe_mips(c, cpu);
 923                 break;
 924         case PRID_COMP_ALCHEMY:
 925                 cpu_probe_alchemy(c, cpu);
 926                 break;
 927         case PRID_COMP_SIBYTE:
 928                 cpu_probe_sibyte(c, cpu);
 929                 break;
 930         case PRID_COMP_BROADCOM:
 931                 cpu_probe_broadcom(c, cpu);
 932                 break;
 933         case PRID_COMP_SANDCRAFT:
 934                 cpu_probe_sandcraft(c, cpu);
 935                 break;
 936         case PRID_COMP_NXP:
 937                 cpu_probe_nxp(c, cpu);
 938                 break;
 939         case PRID_COMP_CAVIUM:
 940                 cpu_probe_cavium(c, cpu);
 941                 break;
 942         }
 943
 944         BUG_ON(!__cpu_name[cpu]);
 945         BUG_ON(c->cputype == CPU_UNKNOWN);
 946
 947         /*
 948          * Platform code can force the cpu type to optimize code
 949          * generation. In that case be sure the cpu type is correctly
 950          * manually setup otherwise it could trigger some nasty bugs.
 951          */
 952         BUG_ON(current_cpu_type() != c->cputype);
 953
 954         if (c->options & MIPS_CPU_FPU) {
 955                 c->fpu_id = cpu_get_fpu_id();
 956
 957                 if (c->isa_level == MIPS_CPU_ISA_M32R1 ||
 958                     c->isa_level == MIPS_CPU_ISA_M32R2 ||
 959                     c->isa_level == MIPS_CPU_ISA_M64R1 ||
 960                     c->isa_level == MIPS_CPU_ISA_M64R2) {
 961                         if (c->fpu_id & MIPS_FPIR_3D)
 962                                 c->ases |= MIPS_ASE_MIPS3D;
 963                 }
 964         }
 965
 966         if (cpu_has_mips_r2)
 967                 c->srsets = ((read_c0_srsctl() >> 26) & 0x0f) + 1;
 968         else
 969                 c->srsets = 1;
 970 }
 971
 972 __cpuinit void cpu_report(void)
 973 {
 974         struct cpuinfo_mips *c = &current_cpu_data;
 975
 976         printk(KERN_INFO "CPU revision is: %08x (%s)\n",
 977                c->processor_id, cpu_name_string());
 978         if (c->options & MIPS_CPU_FPU)
 979                 printk(KERN_INFO "FPU revision is: %08x\n", c->fpu_id);
 980 }