arch/blackfin/mach-bf548/boards/cm_bf548.c

   1 /*
   2  * Copyright 2004-2009 Analog Devices Inc.
   3  *           2008-2009 Bluetechnix
   4  *                2005 National ICT Australia (NICTA)
   5  *                      Aidan Williams <aidan@nicta.com.au>
   6  *
   7  * Licensed under the GPL-2 or later.
   8  */
   9
  10 #include <linux/device.h>
  11 #include <linux/platform_device.h>
  12 #include <linux/mtd/mtd.h>
  13 #include <linux/mtd/partitions.h>
  14 #include <linux/mtd/physmap.h>
  15 #include <linux/spi/spi.h>
  16 #include <linux/spi/flash.h>
  17 #include <linux/irq.h>
  18 #include <linux/interrupt.h>
  19 #include <linux/usb/musb.h>
  20 #include <asm/bfin5xx_spi.h>
  21 #include <asm/dma.h>
  22 #include <asm/gpio.h>
  23 #include <asm/nand.h>
  24 #include <asm/portmux.h>
  25 #include <asm/bfin_sdh.h>
  26 #include <mach/bf54x_keys.h>
  27 #include <asm/dpmc.h>
  28 #include <linux/input.h>
  29 #include <linux/spi/ad7877.h>
  30
  31 /*
  32  * Name the Board for the /proc/cpuinfo
  33  */
  34 const char bfin_board_name[] = "Bluetechnix CM-BF548";
  35
  36 /*
  37  *  Driver needs to know address, irq and flag pin.
  38  */
  39
  40 #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
  41
  42 #include <mach/bf54x-lq043.h>
  43
  44 static struct bfin_bf54xfb_mach_info bf54x_lq043_data = {
  45         .width =        480,
  46         .height =       272,
  47         .xres =         {480, 480, 480},
  48         .yres =         {272, 272, 272},
  49         .bpp =          {24, 24, 24},
  50         .disp =         GPIO_PE3,
  51 };
  52
  53 static struct resource bf54x_lq043_resources[] = {
  54         {
  55                 .start = IRQ_EPPI0_ERR,
  56                 .end = IRQ_EPPI0_ERR,
  57                 .flags = IORESOURCE_IRQ,
  58         },
  59 };
  60
  61 static struct platform_device bf54x_lq043_device = {
  62         .name           = "bf54x-lq043",
  63         .id             = -1,
  64         .num_resources  = ARRAY_SIZE(bf54x_lq043_resources),
  65         .resource       = bf54x_lq043_resources,
  66         .dev            = {
  67                 .platform_data = &bf54x_lq043_data,
  68         },
  69 };
  70 #endif
  71
  72 #if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
  73 static unsigned int bf548_keymap[] = {
  74         KEYVAL(0, 0, KEY_ENTER),
  75         KEYVAL(0, 1, KEY_HELP),
  76         KEYVAL(0, 2, KEY_0),
  77         KEYVAL(0, 3, KEY_BACKSPACE),
  78         KEYVAL(1, 0, KEY_TAB),
  79         KEYVAL(1, 1, KEY_9),
  80         KEYVAL(1, 2, KEY_8),
  81         KEYVAL(1, 3, KEY_7),
  82         KEYVAL(2, 0, KEY_DOWN),
  83         KEYVAL(2, 1, KEY_6),
  84         KEYVAL(2, 2, KEY_5),
  85         KEYVAL(2, 3, KEY_4),
  86         KEYVAL(3, 0, KEY_UP),
  87         KEYVAL(3, 1, KEY_3),
  88         KEYVAL(3, 2, KEY_2),
  89         KEYVAL(3, 3, KEY_1),
  90 };
  91
  92 static struct bfin_kpad_platform_data bf54x_kpad_data = {
  93         .rows                   = 4,
  94         .cols                   = 4,
  95         .keymap                 = bf548_keymap,
  96         .keymapsize             = ARRAY_SIZE(bf548_keymap),
  97         .repeat                 = 0,
  98         .debounce_time          = 5000, /* ns (5ms) */
  99         .coldrive_time          = 1000, /* ns (1ms) */
 100         .keyup_test_interval    = 50, /* ms (50ms) */
 101 };
 102
 103 static struct resource bf54x_kpad_resources[] = {
 104         {
 105                 .start = IRQ_KEY,
 106                 .end = IRQ_KEY,
 107                 .flags = IORESOURCE_IRQ,
 108         },
 109 };
 110
 111 static struct platform_device bf54x_kpad_device = {
 112         .name           = "bf54x-keys",
 113         .id             = -1,
 114         .num_resources  = ARRAY_SIZE(bf54x_kpad_resources),
 115         .resource       = bf54x_kpad_resources,
 116         .dev            = {
 117                 .platform_data = &bf54x_kpad_data,
 118         },
 119 };
 120 #endif
 121
 122 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
 123 static struct platform_device rtc_device = {
 124         .name = "rtc-bfin",
 125         .id   = -1,
 126 };
 127 #endif
 128
 129 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 130 static struct resource bfin_uart_resources[] = {
 131 #ifdef CONFIG_SERIAL_BFIN_UART0
 132         {
 133                 .start = 0xFFC00400,
 134                 .end = 0xFFC004FF,
 135                 .flags = IORESOURCE_MEM,
 136         },
 137 #endif
 138 #ifdef CONFIG_SERIAL_BFIN_UART1
 139         {
 140                 .start = 0xFFC02000,
 141                 .end = 0xFFC020FF,
 142                 .flags = IORESOURCE_MEM,
 143         },
 144 #endif
 145 #ifdef CONFIG_SERIAL_BFIN_UART2
 146         {
 147                 .start = 0xFFC02100,
 148                 .end = 0xFFC021FF,
 149                 .flags = IORESOURCE_MEM,
 150         },
 151 #endif
 152 #ifdef CONFIG_SERIAL_BFIN_UART3
 153         {
 154                 .start = 0xFFC03100,
 155                 .end = 0xFFC031FF,
 156                 .flags = IORESOURCE_MEM,
 157         },
 158 #endif
 159 };
 160
 161 static struct platform_device bfin_uart_device = {
 162         .name = "bfin-uart",
 163         .id = 1,
 164         .num_resources = ARRAY_SIZE(bfin_uart_resources),
 165         .resource = bfin_uart_resources,
 166 };
 167 #endif
 168
 169 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 170 #ifdef CONFIG_BFIN_SIR0
 171 static struct resource bfin_sir0_resources[] = {
 172         {
 173                 .start = 0xFFC00400,
 174                 .end = 0xFFC004FF,
 175                 .flags = IORESOURCE_MEM,
 176         },
 177         {
 178                 .start = IRQ_UART0_RX,
 179                 .end = IRQ_UART0_RX+1,
 180                 .flags = IORESOURCE_IRQ,
 181         },
 182         {
 183                 .start = CH_UART0_RX,
 184                 .end = CH_UART0_RX+1,
 185                 .flags = IORESOURCE_DMA,
 186         },
 187 };
 188 static struct platform_device bfin_sir0_device = {
 189         .name = "bfin_sir",
 190         .id = 0,
 191         .num_resources = ARRAY_SIZE(bfin_sir0_resources),
 192         .resource = bfin_sir0_resources,
 193 };
 194 #endif
 195 #ifdef CONFIG_BFIN_SIR1
 196 static struct resource bfin_sir1_resources[] = {
 197         {
 198                 .start = 0xFFC02000,
 199                 .end = 0xFFC020FF,
 200                 .flags = IORESOURCE_MEM,
 201         },
 202         {
 203                 .start = IRQ_UART1_RX,
 204                 .end = IRQ_UART1_RX+1,
 205                 .flags = IORESOURCE_IRQ,
 206         },
 207         {
 208                 .start = CH_UART1_RX,
 209                 .end = CH_UART1_RX+1,
 210                 .flags = IORESOURCE_DMA,
 211         },
 212 };
 213 static struct platform_device bfin_sir1_device = {
 214         .name = "bfin_sir",
 215         .id = 1,
 216         .num_resources = ARRAY_SIZE(bfin_sir1_resources),
 217         .resource = bfin_sir1_resources,
 218 };
 219 #endif
 220 #ifdef CONFIG_BFIN_SIR2
 221 static struct resource bfin_sir2_resources[] = {
 222         {
 223                 .start = 0xFFC02100,
 224                 .end = 0xFFC021FF,
 225                 .flags = IORESOURCE_MEM,
 226         },
 227         {
 228                 .start = IRQ_UART2_RX,
 229                 .end = IRQ_UART2_RX+1,
 230                 .flags = IORESOURCE_IRQ,
 231         },
 232         {
 233                 .start = CH_UART2_RX,
 234                 .end = CH_UART2_RX+1,
 235                 .flags = IORESOURCE_DMA,
 236         },
 237 };
 238 static struct platform_device bfin_sir2_device = {
 239         .name = "bfin_sir",
 240         .id = 2,
 241         .num_resources = ARRAY_SIZE(bfin_sir2_resources),
 242         .resource = bfin_sir2_resources,
 243 };
 244 #endif
 245 #ifdef CONFIG_BFIN_SIR3
 246 static struct resource bfin_sir3_resources[] = {
 247         {
 248                 .start = 0xFFC03100,
 249                 .end = 0xFFC031FF,
 250                 .flags = IORESOURCE_MEM,
 251         },
 252         {
 253                 .start = IRQ_UART3_RX,
 254                 .end = IRQ_UART3_RX+1,
 255                 .flags = IORESOURCE_IRQ,
 256         },
 257         {
 258                 .start = CH_UART3_RX,
 259                 .end = CH_UART3_RX+1,
 260                 .flags = IORESOURCE_DMA,
 261         },
 262 };
 263 static struct platform_device bfin_sir3_device = {
 264         .name = "bfin_sir",
 265         .id = 3,
 266         .num_resources = ARRAY_SIZE(bfin_sir3_resources),
 267         .resource = bfin_sir3_resources,
 268 };
 269 #endif
 270 #endif
 271
 272 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
 273 #include <linux/smsc911x.h>
 274
 275 static struct resource smsc911x_resources[] = {
 276         {
 277                 .name = "smsc911x-memory",
 278                 .start = 0x24000000,
 279                 .end = 0x24000000 + 0xFF,
 280                 .flags = IORESOURCE_MEM,
 281         },
 282         {
 283                 .start = IRQ_PE6,
 284                 .end = IRQ_PE6,
 285                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
 286         },
 287 };
 288
 289 static struct smsc911x_platform_config smsc911x_config = {
 290         .flags = SMSC911X_USE_16BIT,
 291         .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
 292         .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
 293         .phy_interface = PHY_INTERFACE_MODE_MII,
 294 };
 295
 296 static struct platform_device smsc911x_device = {
 297         .name = "smsc911x",
 298         .id = 0,
 299         .num_resources = ARRAY_SIZE(smsc911x_resources),
 300         .resource = smsc911x_resources,
 301         .dev = {
 302                 .platform_data = &smsc911x_config,
 303         },
 304 };
 305 #endif
 306
 307 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
 308 static struct resource musb_resources[] = {
 309         [0] = {
 310                 .start  = 0xFFC03C00,
 311                 .end    = 0xFFC040FF,
 312                 .flags  = IORESOURCE_MEM,
 313         },
 314         [1] = { /* general IRQ */
 315                 .start  = IRQ_USB_INT0,
 316                 .end    = IRQ_USB_INT0,
 317                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 318         },
 319         [2] = { /* DMA IRQ */
 320                 .start  = IRQ_USB_DMA,
 321                 .end    = IRQ_USB_DMA,
 322                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 323         },
 324 };
 325
 326 static struct musb_hdrc_config musb_config = {
 327         .multipoint     = 0,
 328         .dyn_fifo       = 0,
 329         .soft_con       = 1,
 330         .dma            = 1,
 331         .num_eps        = 8,
 332         .dma_channels   = 8,
 333         .gpio_vrsel     = GPIO_PH6,
 334 };
 335
 336 static struct musb_hdrc_platform_data musb_plat = {
 337 #if defined(CONFIG_USB_MUSB_OTG)
 338         .mode           = MUSB_OTG,
 339 #elif defined(CONFIG_USB_MUSB_HDRC_HCD)
 340         .mode           = MUSB_HOST,
 341 #elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
 342         .mode           = MUSB_PERIPHERAL,
 343 #endif
 344         .config         = &musb_config,
 345 };
 346
 347 static u64 musb_dmamask = ~(u32)0;
 348
 349 static struct platform_device musb_device = {
 350         .name           = "musb_hdrc",
 351         .id             = 0,
 352         .dev = {
 353                 .dma_mask               = &musb_dmamask,
 354                 .coherent_dma_mask      = 0xffffffff,
 355                 .platform_data          = &musb_plat,
 356         },
 357         .num_resources  = ARRAY_SIZE(musb_resources),
 358         .resource       = musb_resources,
 359 };
 360 #endif
 361
 362 #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
 363 static struct resource bfin_atapi_resources[] = {
 364         {
 365                 .start = 0xFFC03800,
 366                 .end = 0xFFC0386F,
 367                 .flags = IORESOURCE_MEM,
 368         },
 369         {
 370                 .start = IRQ_ATAPI_ERR,
 371                 .end = IRQ_ATAPI_ERR,
 372                 .flags = IORESOURCE_IRQ,
 373         },
 374 };
 375
 376 static struct platform_device bfin_atapi_device = {
 377         .name = "pata-bf54x",
 378         .id = -1,
 379         .num_resources = ARRAY_SIZE(bfin_atapi_resources),
 380         .resource = bfin_atapi_resources,
 381 };
 382 #endif
 383
 384 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
 385 static struct mtd_partition partition_info[] = {
 386         {
 387                 .name = "linux kernel(nand)",
 388                 .offset = 0,
 389                 .size = 4 * 1024 * 1024,
 390         },
 391         {
 392                 .name = "file system(nand)",
 393                 .offset = 4 * 1024 * 1024,
 394                 .size = (256 - 4) * 1024 * 1024,
 395         },
 396 };
 397
 398 static struct bf5xx_nand_platform bf5xx_nand_platform = {
 399         .page_size = NFC_PG_SIZE_256,
 400         .data_width = NFC_NWIDTH_8,
 401         .partitions = partition_info,
 402         .nr_partitions = ARRAY_SIZE(partition_info),
 403         .rd_dly = 3,
 404         .wr_dly = 3,
 405 };
 406
 407 static struct resource bf5xx_nand_resources[] = {
 408         {
 409                 .start = 0xFFC03B00,
 410                 .end = 0xFFC03B4F,
 411                 .flags = IORESOURCE_MEM,
 412         },
 413         {
 414                 .start = CH_NFC,
 415                 .end = CH_NFC,
 416                 .flags = IORESOURCE_IRQ,
 417         },
 418 };
 419
 420 static struct platform_device bf5xx_nand_device = {
 421         .name = "bf5xx-nand",
 422         .id = 0,
 423         .num_resources = ARRAY_SIZE(bf5xx_nand_resources),
 424         .resource = bf5xx_nand_resources,
 425         .dev = {
 426                 .platform_data = &bf5xx_nand_platform,
 427         },
 428 };
 429 #endif
 430
 431 #if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
 432 static struct bfin_sd_host bfin_sdh_data = {
 433         .dma_chan = CH_SDH,
 434         .irq_int0 = IRQ_SDH_MASK0,
 435         .pin_req = {P_SD_D0, P_SD_D1, P_SD_D2, P_SD_D3, P_SD_CLK, P_SD_CMD, 0},
 436 };
 437
 438 static struct platform_device bf54x_sdh_device = {
 439         .name = "bfin-sdh",
 440         .id = 0,
 441         .dev = {
 442                 .platform_data = &bfin_sdh_data,
 443         },
 444 };
 445 #endif
 446
 447 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 448 static struct mtd_partition para_partitions[] = {
 449         {
 450                 .name       = "bootloader(nor)",
 451                 .size       = 0x40000,
 452                 .offset     = 0,
 453         }, {
 454                 .name       = "linux kernel(nor)",
 455                 .size       = 0x100000,
 456                 .offset     = MTDPART_OFS_APPEND,
 457         }, {
 458                 .name       = "file system(nor)",
 459                 .size       = MTDPART_SIZ_FULL,
 460                 .offset     = MTDPART_OFS_APPEND,
 461         }
 462 };
 463
 464 static struct physmap_flash_data para_flash_data = {
 465         .width      = 2,
 466         .parts      = para_partitions,
 467         .nr_parts   = ARRAY_SIZE(para_partitions),
 468 };
 469
 470 static struct resource para_flash_resource = {
 471         .start = 0x20000000,
 472         .end   = 0x207fffff,
 473         .flags = IORESOURCE_MEM,
 474 };
 475
 476 static struct platform_device para_flash_device = {
 477         .name          = "physmap-flash",
 478         .id            = 0,
 479         .dev = {
 480                 .platform_data = &para_flash_data,
 481         },
 482         .num_resources = 1,
 483         .resource      = &para_flash_resource,
 484 };
 485 #endif
 486
 487 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 488 /* all SPI peripherals info goes here */
 489 #if defined(CONFIG_MTD_M25P80) \
 490         || defined(CONFIG_MTD_M25P80_MODULE)
 491 /* SPI flash chip (m25p16) */
 492 static struct mtd_partition bfin_spi_flash_partitions[] = {
 493         {
 494                 .name = "bootloader(spi)",
 495                 .size = 0x00040000,
 496                 .offset = 0,
 497                 .mask_flags = MTD_CAP_ROM
 498         }, {
 499                 .name = "linux kernel(spi)",
 500                 .size = 0x1c0000,
 501                 .offset = 0x40000
 502         }
 503 };
 504
 505 static struct flash_platform_data bfin_spi_flash_data = {
 506         .name = "m25p80",
 507         .parts = bfin_spi_flash_partitions,
 508         .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
 509         .type = "m25p16",
 510 };
 511
 512 static struct bfin5xx_spi_chip spi_flash_chip_info = {
 513         .enable_dma = 0,         /* use dma transfer with this chip*/
 514         .bits_per_word = 8,
 515 };
 516 #endif
 517
 518 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 519 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
 520         .enable_dma = 0,
 521         .bits_per_word = 16,
 522 };
 523
 524 static const struct ad7877_platform_data bfin_ad7877_ts_info = {
 525         .model                  = 7877,
 526         .vref_delay_usecs       = 50,   /* internal, no capacitor */
 527         .x_plate_ohms           = 419,
 528         .y_plate_ohms           = 486,
 529         .pressure_max           = 1000,
 530         .pressure_min           = 0,
 531         .stopacq_polarity       = 1,
 532         .first_conversion_delay = 3,
 533         .acquisition_time       = 1,
 534         .averaging              = 1,
 535         .pen_down_acc_interval  = 1,
 536 };
 537 #endif
 538
 539 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 540 static struct bfin5xx_spi_chip spidev_chip_info = {
 541         .enable_dma = 0,
 542         .bits_per_word = 8,
 543 };
 544 #endif
 545
 546 static struct spi_board_info bf54x_spi_board_info[] __initdata = {
 547 #if defined(CONFIG_MTD_M25P80) \
 548         || defined(CONFIG_MTD_M25P80_MODULE)
 549         {
 550                 /* the modalias must be the same as spi device driver name */
 551                 .modalias = "m25p80", /* Name of spi_driver for this device */
 552                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 553                 .bus_num = 0, /* Framework bus number */
 554                 .chip_select = 1, /* SPI_SSEL1*/
 555                 .platform_data = &bfin_spi_flash_data,
 556                 .controller_data = &spi_flash_chip_info,
 557                 .mode = SPI_MODE_3,
 558         },
 559 #endif
 560 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 561 {
 562         .modalias               = "ad7877",
 563         .platform_data          = &bfin_ad7877_ts_info,
 564         .irq                    = IRQ_PJ11,
 565         .max_speed_hz           = 12500000,     /* max spi clock (SCK) speed in HZ */
 566         .bus_num                = 0,
 567         .chip_select            = 2,
 568         .controller_data = &spi_ad7877_chip_info,
 569 },
 570 #endif
 571 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 572         {
 573                 .modalias = "spidev",
 574                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 575                 .bus_num = 0,
 576                 .chip_select = 1,
 577                 .controller_data = &spidev_chip_info,
 578         },
 579 #endif
 580 };
 581
 582 /* SPI (0) */
 583 static struct resource bfin_spi0_resource[] = {
 584         [0] = {
 585                 .start = SPI0_REGBASE,
 586                 .end   = SPI0_REGBASE + 0xFF,
 587                 .flags = IORESOURCE_MEM,
 588         },
 589         [1] = {
 590                 .start = CH_SPI0,
 591                 .end   = CH_SPI0,
 592                 .flags = IORESOURCE_DMA,
 593         },
 594         [2] = {
 595                 .start = IRQ_SPI0,
 596                 .end   = IRQ_SPI0,
 597                 .flags = IORESOURCE_IRQ,
 598         }
 599 };
 600
 601 /* SPI (1) */
 602 static struct resource bfin_spi1_resource[] = {
 603         [0] = {
 604                 .start = SPI1_REGBASE,
 605                 .end   = SPI1_REGBASE + 0xFF,
 606                 .flags = IORESOURCE_MEM,
 607         },
 608         [1] = {
 609                 .start = CH_SPI1,
 610                 .end   = CH_SPI1,
 611                 .flags = IORESOURCE_DMA,
 612         },
 613         [2] = {
 614                 .start = IRQ_SPI1,
 615                 .end   = IRQ_SPI1,
 616                 .flags = IORESOURCE_IRQ,
 617         }
 618 };
 619
 620 /* SPI controller data */
 621 static struct bfin5xx_spi_master bf54x_spi_master_info0 = {
 622         .num_chipselect = 3,
 623         .enable_dma = 1,  /* master has the ability to do dma transfer */
 624         .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 625 };
 626
 627 static struct platform_device bf54x_spi_master0 = {
 628         .name = "bfin-spi",
 629         .id = 0, /* Bus number */
 630         .num_resources = ARRAY_SIZE(bfin_spi0_resource),
 631         .resource = bfin_spi0_resource,
 632         .dev = {
 633                 .platform_data = &bf54x_spi_master_info0, /* Passed to driver */
 634                 },
 635 };
 636
 637 static struct bfin5xx_spi_master bf54x_spi_master_info1 = {
 638         .num_chipselect = 3,
 639         .enable_dma = 1,  /* master has the ability to do dma transfer */
 640         .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
 641 };
 642
 643 static struct platform_device bf54x_spi_master1 = {
 644         .name = "bfin-spi",
 645         .id = 1, /* Bus number */
 646         .num_resources = ARRAY_SIZE(bfin_spi1_resource),
 647         .resource = bfin_spi1_resource,
 648         .dev = {
 649                 .platform_data = &bf54x_spi_master_info1, /* Passed to driver */
 650                 },
 651 };
 652 #endif  /* spi master and devices */
 653
 654 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
 655 static struct resource bfin_twi0_resource[] = {
 656         [0] = {
 657                 .start = TWI0_REGBASE,
 658                 .end   = TWI0_REGBASE + 0xFF,
 659                 .flags = IORESOURCE_MEM,
 660         },
 661         [1] = {
 662                 .start = IRQ_TWI0,
 663                 .end   = IRQ_TWI0,
 664                 .flags = IORESOURCE_IRQ,
 665         },
 666 };
 667
 668 static struct platform_device i2c_bfin_twi0_device = {
 669         .name = "i2c-bfin-twi",
 670         .id = 0,
 671         .num_resources = ARRAY_SIZE(bfin_twi0_resource),
 672         .resource = bfin_twi0_resource,
 673 };
 674
 675 #if !defined(CONFIG_BF542)      /* The BF542 only has 1 TWI */
 676 static struct resource bfin_twi1_resource[] = {
 677         [0] = {
 678                 .start = TWI1_REGBASE,
 679                 .end   = TWI1_REGBASE + 0xFF,
 680                 .flags = IORESOURCE_MEM,
 681         },
 682         [1] = {
 683                 .start = IRQ_TWI1,
 684                 .end   = IRQ_TWI1,
 685                 .flags = IORESOURCE_IRQ,
 686         },
 687 };
 688
 689 static struct platform_device i2c_bfin_twi1_device = {
 690         .name = "i2c-bfin-twi",
 691         .id = 1,
 692         .num_resources = ARRAY_SIZE(bfin_twi1_resource),
 693         .resource = bfin_twi1_resource,
 694 };
 695 #endif
 696 #endif
 697
 698 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 699 #include <linux/gpio_keys.h>
 700
 701 static struct gpio_keys_button bfin_gpio_keys_table[] = {
 702         {BTN_0, GPIO_PH7, 1, "gpio-keys: BTN0"},
 703 };
 704
 705 static struct gpio_keys_platform_data bfin_gpio_keys_data = {
 706         .buttons        = bfin_gpio_keys_table,
 707         .nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
 708 };
 709
 710 static struct platform_device bfin_device_gpiokeys = {
 711         .name      = "gpio-keys",
 712         .dev = {
 713                 .platform_data = &bfin_gpio_keys_data,
 714         },
 715 };
 716 #endif
 717
 718 static const unsigned int cclk_vlev_datasheet[] =
 719 {
 720 /*
 721  * Internal VLEV BF54XSBBC1533
 722  ****temporarily using these values until data sheet is updated
 723  */
 724         VRPAIR(VLEV_085, 150000000),
 725         VRPAIR(VLEV_090, 250000000),
 726         VRPAIR(VLEV_110, 276000000),
 727         VRPAIR(VLEV_115, 301000000),
 728         VRPAIR(VLEV_120, 525000000),
 729         VRPAIR(VLEV_125, 550000000),
 730         VRPAIR(VLEV_130, 600000000),
 731 };
 732
 733 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
 734         .tuple_tab = cclk_vlev_datasheet,
 735         .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
 736         .vr_settling_time = 25 /* us */,
 737 };
 738
 739 static struct platform_device bfin_dpmc = {
 740         .name = "bfin dpmc",
 741         .dev = {
 742                 .platform_data = &bfin_dmpc_vreg_data,
 743         },
 744 };
 745
 746 static struct platform_device *cm_bf548_devices[] __initdata = {
 747
 748         &bfin_dpmc,
 749
 750 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
 751         &rtc_device,
 752 #endif
 753
 754 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 755         &bfin_uart_device,
 756 #endif
 757
 758 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 759 #ifdef CONFIG_BFIN_SIR0
 760         &bfin_sir0_device,
 761 #endif
 762 #ifdef CONFIG_BFIN_SIR1
 763         &bfin_sir1_device,
 764 #endif
 765 #ifdef CONFIG_BFIN_SIR2
 766         &bfin_sir2_device,
 767 #endif
 768 #ifdef CONFIG_BFIN_SIR3
 769         &bfin_sir3_device,
 770 #endif
 771 #endif
 772
 773 #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
 774         &bf54x_lq043_device,
 775 #endif
 776
 777 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
 778         &smsc911x_device,
 779 #endif
 780
 781 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
 782         &musb_device,
 783 #endif
 784
 785 #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
 786         &bfin_atapi_device,
 787 #endif
 788
 789 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
 790         &bf5xx_nand_device,
 791 #endif
 792
 793 #if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
 794         &bf54x_sdh_device,
 795 #endif
 796
 797 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 798         &bf54x_spi_master0,
 799         &bf54x_spi_master1,
 800 #endif
 801
 802 #if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
 803         &bf54x_kpad_device,
 804 #endif
 805
 806 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
 807         &i2c_bfin_twi0_device,
 808 #if !defined(CONFIG_BF542)
 809         &i2c_bfin_twi1_device,
 810 #endif
 811 #endif
 812
 813 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 814         &bfin_device_gpiokeys,
 815 #endif
 816
 817 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 818         &para_flash_device,
 819 #endif
 820 };
 821
 822 static int __init cm_bf548_init(void)
 823 {
 824         printk(KERN_INFO "%s(): registering device resources\n", __func__);
 825         platform_add_devices(cm_bf548_devices, ARRAY_SIZE(cm_bf548_devices));
 826
 827 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 828         spi_register_board_info(bf54x_spi_board_info,
 829                         ARRAY_SIZE(bf54x_spi_board_info));
 830 #endif
 831
 832         return 0;
 833 }
 834
 835 arch_initcall(cm_bf548_init);