2 * Copyright 2004-2009 Analog Devices Inc.
3 * 2005 National ICT Australia (NICTA)
4 * Aidan Williams <aidan@nicta.com.au>
6 * Licensed under the GPL-2
9 #include <linux/device.h>
10 #include <linux/platform_device.h>
11 #include <linux/mtd/mtd.h>
12 #include <linux/mtd/physmap.h>
13 #include <linux/mtd/partitions.h>
14 #include <linux/spi/spi.h>
15 #include <linux/spi/flash.h>
16 #include <linux/irq.h>
17 #include <linux/interrupt.h>
18 #include <asm/bfin5xx_spi.h>
22 #include <asm/portmux.h>
24 #include <linux/input.h>
27 * Name the Board for the /proc/cpuinfo
29 const char bfin_board_name[] = "ADI BF538-EZKIT";
32 * Driver needs to know address, irq and flag pin.
36 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
37 static struct platform_device rtc_device = {
43 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
44 #ifdef CONFIG_SERIAL_BFIN_UART0
45 static struct resource bfin_uart0_resources[] = {
49 .flags = IORESOURCE_MEM,
52 .start = IRQ_UART0_RX,
53 .end = IRQ_UART0_RX+1,
54 .flags = IORESOURCE_IRQ,
57 .start = IRQ_UART0_ERROR,
58 .end = IRQ_UART0_ERROR,
59 .flags = IORESOURCE_IRQ,
64 .flags = IORESOURCE_DMA,
69 .flags = IORESOURCE_DMA,
71 #ifdef CONFIG_BFIN_UART0_CTSRTS
75 .flags = IORESOURCE_IO,
80 .flags = IORESOURCE_IO,
85 static unsigned short bfin_uart0_peripherals[] = {
86 P_UART0_TX, P_UART0_RX, 0
89 static struct platform_device bfin_uart0_device = {
92 .num_resources = ARRAY_SIZE(bfin_uart0_resources),
93 .resource = bfin_uart0_resources,
95 .platform_data = &bfin_uart0_peripherals, /* Passed to driver */
99 #ifdef CONFIG_SERIAL_BFIN_UART1
100 static struct resource bfin_uart1_resources[] = {
104 .flags = IORESOURCE_MEM,
107 .start = IRQ_UART1_RX,
108 .end = IRQ_UART1_RX+1,
109 .flags = IORESOURCE_IRQ,
112 .start = IRQ_UART1_ERROR,
113 .end = IRQ_UART1_ERROR,
114 .flags = IORESOURCE_IRQ,
117 .start = CH_UART1_TX,
119 .flags = IORESOURCE_DMA,
122 .start = CH_UART1_RX,
124 .flags = IORESOURCE_DMA,
128 static unsigned short bfin_uart1_peripherals[] = {
129 P_UART1_TX, P_UART1_RX, 0
132 static struct platform_device bfin_uart1_device = {
135 .num_resources = ARRAY_SIZE(bfin_uart1_resources),
136 .resource = bfin_uart1_resources,
138 .platform_data = &bfin_uart1_peripherals, /* Passed to driver */
142 #ifdef CONFIG_SERIAL_BFIN_UART2
143 static struct resource bfin_uart2_resources[] = {
147 .flags = IORESOURCE_MEM,
150 .start = IRQ_UART2_RX,
151 .end = IRQ_UART2_RX+1,
152 .flags = IORESOURCE_IRQ,
155 .start = IRQ_UART2_ERROR,
156 .end = IRQ_UART2_ERROR,
157 .flags = IORESOURCE_IRQ,
160 .start = CH_UART2_TX,
162 .flags = IORESOURCE_DMA,
165 .start = CH_UART2_RX,
167 .flags = IORESOURCE_DMA,
171 static unsigned short bfin_uart2_peripherals[] = {
172 P_UART2_TX, P_UART2_RX, 0
175 static struct platform_device bfin_uart2_device = {
178 .num_resources = ARRAY_SIZE(bfin_uart2_resources),
179 .resource = bfin_uart2_resources,
181 .platform_data = &bfin_uart2_peripherals, /* Passed to driver */
187 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
188 #ifdef CONFIG_BFIN_SIR0
189 static struct resource bfin_sir0_resources[] = {
193 .flags = IORESOURCE_MEM,
196 .start = IRQ_UART0_RX,
197 .end = IRQ_UART0_RX+1,
198 .flags = IORESOURCE_IRQ,
201 .start = CH_UART0_RX,
202 .end = CH_UART0_RX+1,
203 .flags = IORESOURCE_DMA,
206 static struct platform_device bfin_sir0_device = {
209 .num_resources = ARRAY_SIZE(bfin_sir0_resources),
210 .resource = bfin_sir0_resources,
213 #ifdef CONFIG_BFIN_SIR1
214 static struct resource bfin_sir1_resources[] = {
218 .flags = IORESOURCE_MEM,
221 .start = IRQ_UART1_RX,
222 .end = IRQ_UART1_RX+1,
223 .flags = IORESOURCE_IRQ,
226 .start = CH_UART1_RX,
227 .end = CH_UART1_RX+1,
228 .flags = IORESOURCE_DMA,
231 static struct platform_device bfin_sir1_device = {
234 .num_resources = ARRAY_SIZE(bfin_sir1_resources),
235 .resource = bfin_sir1_resources,
238 #ifdef CONFIG_BFIN_SIR2
239 static struct resource bfin_sir2_resources[] = {
243 .flags = IORESOURCE_MEM,
246 .start = IRQ_UART2_RX,
247 .end = IRQ_UART2_RX+1,
248 .flags = IORESOURCE_IRQ,
251 .start = CH_UART2_RX,
252 .end = CH_UART2_RX+1,
253 .flags = IORESOURCE_DMA,
256 static struct platform_device bfin_sir2_device = {
259 .num_resources = ARRAY_SIZE(bfin_sir2_resources),
260 .resource = bfin_sir2_resources,
265 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
266 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
267 static struct resource bfin_sport0_uart_resources[] = {
269 .start = SPORT0_TCR1,
270 .end = SPORT0_MRCS3+4,
271 .flags = IORESOURCE_MEM,
274 .start = IRQ_SPORT0_RX,
275 .end = IRQ_SPORT0_RX+1,
276 .flags = IORESOURCE_IRQ,
279 .start = IRQ_SPORT0_ERROR,
280 .end = IRQ_SPORT0_ERROR,
281 .flags = IORESOURCE_IRQ,
285 static unsigned short bfin_sport0_peripherals[] = {
286 P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
287 P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
290 static struct platform_device bfin_sport0_uart_device = {
291 .name = "bfin-sport-uart",
293 .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
294 .resource = bfin_sport0_uart_resources,
296 .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
300 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
301 static struct resource bfin_sport1_uart_resources[] = {
303 .start = SPORT1_TCR1,
304 .end = SPORT1_MRCS3+4,
305 .flags = IORESOURCE_MEM,
308 .start = IRQ_SPORT1_RX,
309 .end = IRQ_SPORT1_RX+1,
310 .flags = IORESOURCE_IRQ,
313 .start = IRQ_SPORT1_ERROR,
314 .end = IRQ_SPORT1_ERROR,
315 .flags = IORESOURCE_IRQ,
319 static unsigned short bfin_sport1_peripherals[] = {
320 P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
321 P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
324 static struct platform_device bfin_sport1_uart_device = {
325 .name = "bfin-sport-uart",
327 .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
328 .resource = bfin_sport1_uart_resources,
330 .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
334 #ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
335 static struct resource bfin_sport2_uart_resources[] = {
337 .start = SPORT2_TCR1,
338 .end = SPORT2_MRCS3+4,
339 .flags = IORESOURCE_MEM,
342 .start = IRQ_SPORT2_RX,
343 .end = IRQ_SPORT2_RX+1,
344 .flags = IORESOURCE_IRQ,
347 .start = IRQ_SPORT2_ERROR,
348 .end = IRQ_SPORT2_ERROR,
349 .flags = IORESOURCE_IRQ,
353 static unsigned short bfin_sport2_peripherals[] = {
354 P_SPORT2_TFS, P_SPORT2_DTPRI, P_SPORT2_TSCLK, P_SPORT2_RFS,
355 P_SPORT2_DRPRI, P_SPORT2_RSCLK, P_SPORT2_DRSEC, P_SPORT2_DTSEC, 0
358 static struct platform_device bfin_sport2_uart_device = {
359 .name = "bfin-sport-uart",
361 .num_resources = ARRAY_SIZE(bfin_sport2_uart_resources),
362 .resource = bfin_sport2_uart_resources,
364 .platform_data = &bfin_sport2_peripherals, /* Passed to driver */
368 #ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
369 static struct resource bfin_sport3_uart_resources[] = {
371 .start = SPORT3_TCR1,
372 .end = SPORT3_MRCS3+4,
373 .flags = IORESOURCE_MEM,
376 .start = IRQ_SPORT3_RX,
377 .end = IRQ_SPORT3_RX+1,
378 .flags = IORESOURCE_IRQ,
381 .start = IRQ_SPORT3_ERROR,
382 .end = IRQ_SPORT3_ERROR,
383 .flags = IORESOURCE_IRQ,
387 static unsigned short bfin_sport3_peripherals[] = {
388 P_SPORT3_TFS, P_SPORT3_DTPRI, P_SPORT3_TSCLK, P_SPORT3_RFS,
389 P_SPORT3_DRPRI, P_SPORT3_RSCLK, P_SPORT3_DRSEC, P_SPORT3_DTSEC, 0
392 static struct platform_device bfin_sport3_uart_device = {
393 .name = "bfin-sport-uart",
395 .num_resources = ARRAY_SIZE(bfin_sport3_uart_resources),
396 .resource = bfin_sport3_uart_resources,
398 .platform_data = &bfin_sport3_peripherals, /* Passed to driver */
404 #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
405 static unsigned short bfin_can_peripherals[] = {
406 P_CAN0_RX, P_CAN0_TX, 0
409 static struct resource bfin_can_resources[] = {
413 .flags = IORESOURCE_MEM,
418 .flags = IORESOURCE_IRQ,
423 .flags = IORESOURCE_IRQ,
426 .start = IRQ_CAN_ERROR,
427 .end = IRQ_CAN_ERROR,
428 .flags = IORESOURCE_IRQ,
432 static struct platform_device bfin_can_device = {
434 .num_resources = ARRAY_SIZE(bfin_can_resources),
435 .resource = bfin_can_resources,
437 .platform_data = &bfin_can_peripherals, /* Passed to driver */
443 * USB-LAN EzExtender board
444 * Driver needs to know address, irq and flag pin.
446 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
447 #include <linux/smc91x.h>
449 static struct smc91x_platdata smc91x_info = {
450 .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
451 .leda = RPC_LED_100_10,
452 .ledb = RPC_LED_TX_RX,
455 static struct resource smc91x_resources[] = {
457 .name = "smc91x-regs",
459 .end = 0x20310300 + 16,
460 .flags = IORESOURCE_MEM,
464 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
467 static struct platform_device smc91x_device = {
470 .num_resources = ARRAY_SIZE(smc91x_resources),
471 .resource = smc91x_resources,
473 .platform_data = &smc91x_info,
478 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
479 /* all SPI peripherals info goes here */
480 #if defined(CONFIG_MTD_M25P80) \
481 || defined(CONFIG_MTD_M25P80_MODULE)
482 /* SPI flash chip (m25p16) */
483 static struct mtd_partition bfin_spi_flash_partitions[] = {
485 .name = "bootloader(spi)",
488 .mask_flags = MTD_CAP_ROM
490 .name = "linux kernel(spi)",
496 static struct flash_platform_data bfin_spi_flash_data = {
498 .parts = bfin_spi_flash_partitions,
499 .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
503 static struct bfin5xx_spi_chip spi_flash_chip_info = {
504 .enable_dma = 0, /* use dma transfer with this chip*/
508 #if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
509 #include <linux/spi/ad7879.h>
510 static const struct ad7879_platform_data bfin_ad7879_ts_info = {
511 .model = 7879, /* Model = AD7879 */
512 .x_plate_ohms = 620, /* 620 Ohm from the touch datasheet */
513 .pressure_max = 10000,
515 .first_conversion_delay = 3, /* wait 512us before do a first conversion */
516 .acquisition_time = 1, /* 4us acquisition time per sample */
517 .median = 2, /* do 8 measurements */
518 .averaging = 1, /* take the average of 4 middle samples */
519 .pen_down_acc_interval = 255, /* 9.4 ms */
520 .gpio_export = 1, /* Export GPIO to gpiolib */
521 .gpio_base = -1, /* Dynamic allocation */
525 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
526 #include <asm/bfin-lq035q1.h>
528 static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
529 .mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
530 .ppi_mode = USE_RGB565_16_BIT_PPI,
531 .use_bl = 0, /* let something else control the LCD Blacklight */
535 static struct resource bfin_lq035q1_resources[] = {
537 .start = IRQ_PPI_ERROR,
538 .end = IRQ_PPI_ERROR,
539 .flags = IORESOURCE_IRQ,
543 static struct platform_device bfin_lq035q1_device = {
544 .name = "bfin-lq035q1",
546 .num_resources = ARRAY_SIZE(bfin_lq035q1_resources),
547 .resource = bfin_lq035q1_resources,
549 .platform_data = &bfin_lq035q1_data,
554 static struct spi_board_info bf538_spi_board_info[] __initdata = {
555 #if defined(CONFIG_MTD_M25P80) \
556 || defined(CONFIG_MTD_M25P80_MODULE)
558 /* the modalias must be the same as spi device driver name */
559 .modalias = "m25p80", /* Name of spi_driver for this device */
560 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
561 .bus_num = 0, /* Framework bus number */
562 .chip_select = 1, /* SPI_SSEL1*/
563 .platform_data = &bfin_spi_flash_data,
564 .controller_data = &spi_flash_chip_info,
568 #if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
570 .modalias = "ad7879",
571 .platform_data = &bfin_ad7879_ts_info,
573 .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */
576 .mode = SPI_CPHA | SPI_CPOL,
579 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
581 .modalias = "bfin-lq035q1-spi",
582 .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
585 .mode = SPI_CPHA | SPI_CPOL,
588 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
590 .modalias = "spidev",
591 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
599 static struct resource bfin_spi0_resource[] = {
601 .start = SPI0_REGBASE,
602 .end = SPI0_REGBASE + 0xFF,
603 .flags = IORESOURCE_MEM,
608 .flags = IORESOURCE_DMA,
613 .flags = IORESOURCE_IRQ,
618 static struct resource bfin_spi1_resource[] = {
620 .start = SPI1_REGBASE,
621 .end = SPI1_REGBASE + 0xFF,
622 .flags = IORESOURCE_MEM,
627 .flags = IORESOURCE_DMA,
632 .flags = IORESOURCE_IRQ,
637 static struct resource bfin_spi2_resource[] = {
639 .start = SPI2_REGBASE,
640 .end = SPI2_REGBASE + 0xFF,
641 .flags = IORESOURCE_MEM,
646 .flags = IORESOURCE_DMA,
651 .flags = IORESOURCE_IRQ,
655 /* SPI controller data */
656 static struct bfin5xx_spi_master bf538_spi_master_info0 = {
658 .enable_dma = 1, /* master has the ability to do dma transfer */
659 .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
662 static struct platform_device bf538_spi_master0 = {
664 .id = 0, /* Bus number */
665 .num_resources = ARRAY_SIZE(bfin_spi0_resource),
666 .resource = bfin_spi0_resource,
668 .platform_data = &bf538_spi_master_info0, /* Passed to driver */
672 static struct bfin5xx_spi_master bf538_spi_master_info1 = {
674 .enable_dma = 1, /* master has the ability to do dma transfer */
675 .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
678 static struct platform_device bf538_spi_master1 = {
680 .id = 1, /* Bus number */
681 .num_resources = ARRAY_SIZE(bfin_spi1_resource),
682 .resource = bfin_spi1_resource,
684 .platform_data = &bf538_spi_master_info1, /* Passed to driver */
688 static struct bfin5xx_spi_master bf538_spi_master_info2 = {
690 .enable_dma = 1, /* master has the ability to do dma transfer */
691 .pin_req = {P_SPI2_SCK, P_SPI2_MISO, P_SPI2_MOSI, 0},
694 static struct platform_device bf538_spi_master2 = {
696 .id = 2, /* Bus number */
697 .num_resources = ARRAY_SIZE(bfin_spi2_resource),
698 .resource = bfin_spi2_resource,
700 .platform_data = &bf538_spi_master_info2, /* Passed to driver */
704 #endif /* spi master and devices */
706 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
707 static struct resource bfin_twi0_resource[] = {
709 .start = TWI0_REGBASE,
710 .end = TWI0_REGBASE + 0xFF,
711 .flags = IORESOURCE_MEM,
716 .flags = IORESOURCE_IRQ,
720 static struct platform_device i2c_bfin_twi0_device = {
721 .name = "i2c-bfin-twi",
723 .num_resources = ARRAY_SIZE(bfin_twi0_resource),
724 .resource = bfin_twi0_resource,
727 #if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */
728 static struct resource bfin_twi1_resource[] = {
730 .start = TWI1_REGBASE,
731 .end = TWI1_REGBASE + 0xFF,
732 .flags = IORESOURCE_MEM,
737 .flags = IORESOURCE_IRQ,
741 static struct platform_device i2c_bfin_twi1_device = {
742 .name = "i2c-bfin-twi",
744 .num_resources = ARRAY_SIZE(bfin_twi1_resource),
745 .resource = bfin_twi1_resource,
750 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
751 #include <linux/gpio_keys.h>
753 static struct gpio_keys_button bfin_gpio_keys_table[] = {
754 {BTN_0, GPIO_PC7, 1, "gpio-keys: BTN0"},
757 static struct gpio_keys_platform_data bfin_gpio_keys_data = {
758 .buttons = bfin_gpio_keys_table,
759 .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table),
762 static struct platform_device bfin_device_gpiokeys = {
765 .platform_data = &bfin_gpio_keys_data,
770 static const unsigned int cclk_vlev_datasheet[] =
773 * Internal VLEV BF538SBBC1533
774 ****temporarily using these values until data sheet is updated
776 VRPAIR(VLEV_100, 150000000),
777 VRPAIR(VLEV_100, 250000000),
778 VRPAIR(VLEV_110, 276000000),
779 VRPAIR(VLEV_115, 301000000),
780 VRPAIR(VLEV_120, 525000000),
781 VRPAIR(VLEV_125, 550000000),
782 VRPAIR(VLEV_130, 600000000),
785 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
786 .tuple_tab = cclk_vlev_datasheet,
787 .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
788 .vr_settling_time = 25 /* us */,
791 static struct platform_device bfin_dpmc = {
794 .platform_data = &bfin_dmpc_vreg_data,
798 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
799 static struct mtd_partition ezkit_partitions[] = {
801 .name = "bootloader(nor)",
805 .name = "linux kernel(nor)",
807 .offset = MTDPART_OFS_APPEND,
809 .name = "file system(nor)",
810 .size = MTDPART_SIZ_FULL,
811 .offset = MTDPART_OFS_APPEND,
815 static struct physmap_flash_data ezkit_flash_data = {
817 .parts = ezkit_partitions,
818 .nr_parts = ARRAY_SIZE(ezkit_partitions),
821 static struct resource ezkit_flash_resource = {
823 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
828 .flags = IORESOURCE_MEM,
831 static struct platform_device ezkit_flash_device = {
832 .name = "physmap-flash",
835 .platform_data = &ezkit_flash_data,
838 .resource = &ezkit_flash_resource,
842 static struct platform_device *cm_bf538_devices[] __initdata = {
846 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
850 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
851 #ifdef CONFIG_SERIAL_BFIN_UART0
854 #ifdef CONFIG_SERIAL_BFIN_UART1
857 #ifdef CONFIG_SERIAL_BFIN_UART2
862 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
868 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
869 &i2c_bfin_twi0_device,
870 &i2c_bfin_twi1_device,
873 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
874 #ifdef CONFIG_BFIN_SIR0
877 #ifdef CONFIG_BFIN_SIR1
880 #ifdef CONFIG_BFIN_SIR2
885 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
886 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
887 &bfin_sport0_uart_device,
889 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
890 &bfin_sport1_uart_device,
892 #ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
893 &bfin_sport2_uart_device,
895 #ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
896 &bfin_sport3_uart_device,
900 #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
904 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
908 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
909 &bfin_lq035q1_device,
912 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
913 &bfin_device_gpiokeys,
916 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
921 static int __init ezkit_init(void)
923 printk(KERN_INFO "%s(): registering device resources\n", __func__);
924 platform_add_devices(cm_bf538_devices, ARRAY_SIZE(cm_bf538_devices));
926 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
927 spi_register_board_info(bf538_spi_board_info,
928 ARRAY_SIZE(bf538_spi_board_info));
934 arch_initcall(ezkit_init);
936 static struct platform_device *ezkit_early_devices[] __initdata = {
937 #if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
938 #ifdef CONFIG_SERIAL_BFIN_UART0
941 #ifdef CONFIG_SERIAL_BFIN_UART1
944 #ifdef CONFIG_SERIAL_BFIN_UART2
949 #if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
950 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
951 &bfin_sport0_uart_device,
953 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
954 &bfin_sport1_uart_device,
956 #ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
957 &bfin_sport2_uart_device,
959 #ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
960 &bfin_sport3_uart_device,
965 void __init native_machine_early_platform_add_devices(void)
967 printk(KERN_INFO "register early platform devices\n");
968 early_platform_add_devices(ezkit_early_devices,
969 ARRAY_SIZE(ezkit_early_devices));