2 * Copyright (C) 2008-2009 ST-Ericsson
4 * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2, as
8 * published by the Free Software Foundation.
11 #include <linux/kernel.h>
12 #include <linux/init.h>
13 #include <linux/interrupt.h>
14 #include <linux/platform_device.h>
16 #include <linux/i2c.h>
17 #include <linux/gpio.h>
18 #include <linux/amba/bus.h>
19 #include <linux/amba/pl022.h>
20 #include <linux/spi/spi.h>
21 #include <linux/mfd/ab8500.h>
22 #include <linux/mfd/tc3589x.h>
24 #include <asm/mach-types.h>
25 #include <asm/mach/arch.h>
27 #include <plat/pincfg.h>
30 #include <mach/hardware.h>
31 #include <mach/setup.h>
32 #include <mach/devices.h>
33 #include <mach/irqs.h>
35 #include "devices-db8500.h"
36 #include "pins-db8500.h"
37 #include "board-mop500.h"
39 static pin_cfg_t mop500_pins[] = {
78 GPIO218_GPIO | PIN_INPUT_PULLUP,
81 static struct ab8500_platform_data ab8500_platdata = {
82 .irq_base = MOP500_AB8500_IRQ_BASE,
85 static struct resource ab8500_resources[] = {
87 .start = IRQ_DB8500_AB8500,
88 .end = IRQ_DB8500_AB8500,
89 .flags = IORESOURCE_IRQ
93 struct platform_device ab8500_device = {
97 .platform_data = &ab8500_platdata,
100 .resource = ab8500_resources,
103 static struct pl022_ssp_controller ssp0_platform_data = {
105 /* pl022 not yet supports dma */
107 /* on this platform, gpio 31,142,144,214 &
108 * 224 are connected as chip selects
117 static void mop500_tc35892_init(struct tc3589x *tc3589x, unsigned int base)
119 mop500_sdi_tc35892_init();
122 static struct tc3589x_gpio_platform_data mop500_tc35892_gpio_data = {
123 .gpio_base = MOP500_EGPIO(0),
124 .setup = mop500_tc35892_init,
127 static struct tc3589x_platform_data mop500_tc35892_data = {
128 .block = TC3589x_BLOCK_GPIO,
129 .gpio = &mop500_tc35892_gpio_data,
130 .irq_base = MOP500_EGPIO_IRQ_BASE,
133 static struct i2c_board_info mop500_i2c0_devices[] = {
135 I2C_BOARD_INFO("tc3589x", 0x42),
136 .irq = NOMADIK_GPIO_TO_IRQ(217),
137 .platform_data = &mop500_tc35892_data,
141 #define U8500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, _sm) \
142 static struct nmk_i2c_controller u8500_i2c##id##_data = { \
144 * slave data setup time, which is \
145 * 250 ns,100ns,10ns which is 14,6,2 \
146 * respectively for a 48 Mhz \
150 /* Tx FIFO threshold */ \
152 /* Rx FIFO threshold */ \
154 /* std. mode operation */ \
160 * The board uses 4 i2c controllers, initialize all of
161 * them with slave data setup time of 250 ns,
162 * Tx & Rx FIFO threshold values as 1 and standard
165 U8500_I2C_CONTROLLER(0, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
166 U8500_I2C_CONTROLLER(1, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
167 U8500_I2C_CONTROLLER(2, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
168 U8500_I2C_CONTROLLER(3, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
170 static void __init mop500_i2c_init(void)
172 db8500_add_i2c0(&u8500_i2c0_data);
173 db8500_add_i2c1(&u8500_i2c1_data);
174 db8500_add_i2c2(&u8500_i2c2_data);
175 db8500_add_i2c3(&u8500_i2c3_data);
178 /* add any platform devices here - TODO */
179 static struct platform_device *platform_devs[] __initdata = {
182 static void __init mop500_spi_init(void)
184 db8500_add_ssp0(&ssp0_platform_data);
187 static void __init mop500_uart_init(void)
194 static void __init u8500_init_machine(void)
196 u8500_init_devices();
198 nmk_config_pins(mop500_pins, ARRAY_SIZE(mop500_pins));
200 platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
207 mop500_keypad_init();
209 platform_device_register(&ab8500_device);
211 i2c_register_board_info(0, mop500_i2c0_devices,
212 ARRAY_SIZE(mop500_i2c0_devices));
215 MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
216 /* Maintainer: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> */
217 .boot_params = 0x100,
218 .map_io = u8500_map_io,
219 .init_irq = ux500_init_irq,
220 /* we re-use nomadik timer here */
221 .timer = &ux500_timer,
222 .init_machine = u8500_init_machine,