arch/arm/mach-spear3xx/spear300_evb.c

   1 /*
   2  * arch/arm/mach-spear3xx/spear300_evb.c
   3  *
   4  * SPEAr300 evaluation board source file
   5  *
   6  * Copyright (C) 2009 ST Microelectronics
   7  * Viresh Kumar<viresh.kumar@st.com>
   8  *
   9  * This file is licensed under the terms of the GNU General Public
  10  * License version 2. This program is licensed "as is" without any
  11  * warranty of any kind, whether express or implied.
  12  */
  13
  14 #include <asm/mach/arch.h>
  15 #include <asm/mach-types.h>
  16 #include <mach/generic.h>
  17 #include <mach/hardware.h>
  18
  19 /* padmux devices to enable */
  20 static struct pmx_dev *pmx_devs[] = {
  21         /* spear3xx specific devices */
  22         &spear3xx_pmx_i2c,
  23         &spear3xx_pmx_ssp_cs,
  24         &spear3xx_pmx_ssp,
  25         &spear3xx_pmx_mii,
  26         &spear3xx_pmx_uart0,
  27
  28         /* spear300 specific devices */
  29         &spear300_pmx_fsmc_2_chips,
  30         &spear300_pmx_clcd,
  31         &spear300_pmx_telecom_sdhci_4bit,
  32         &spear300_pmx_gpio1,
  33 };
  34
  35 static struct amba_device *amba_devs[] __initdata = {
  36         /* spear3xx specific devices */
  37         &spear3xx_gpio_device,
  38         &spear3xx_uart_device,
  39
  40         /* spear300 specific devices */
  41         &spear300_gpio1_device,
  42 };
  43
  44 static struct platform_device *plat_devs[] __initdata = {
  45         /* spear3xx specific devices */
  46
  47         /* spear300 specific devices */
  48 };
  49
  50 static void __init spear300_evb_init(void)
  51 {
  52         unsigned int i;
  53
  54         /* call spear300 machine init function */
  55         spear300_init(&spear300_photo_frame_mode, pmx_devs,
  56                         ARRAY_SIZE(pmx_devs));
  57
  58         /* Add Platform Devices */
  59         platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
  60
  61         /* Add Amba Devices */
  62         for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
  63                 amba_device_register(amba_devs[i], &iomem_resource);
  64 }
  65
  66 MACHINE_START(SPEAR300, "ST-SPEAR300-EVB")
  67         .atag_offset    =       0x100,
  68         .map_io         =       spear3xx_map_io,
  69         .init_irq       =       spear3xx_init_irq,
  70         .timer          =       &spear3xx_timer,
  71         .init_machine   =       spear300_evb_init,
  72 MACHINE_END