arch/arm/mach-s3c64xx/dma.c

   1 /* linux/arch/arm/plat-s3c64xx/dma.c
   2  *
   3  * Copyright 2009 Openmoko, Inc.
   4  * Copyright 2009 Simtec Electronics
   5  *      Ben Dooks <ben@simtec.co.uk>
   6  *      http://armlinux.simtec.co.uk/
   7  *
   8  * S3C64XX DMA core
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License version 2 as
  12  * published by the Free Software Foundation.
  13 */
  14
  15 #include <linux/kernel.h>
  16 #include <linux/module.h>
  17 #include <linux/interrupt.h>
  18 #include <linux/dmapool.h>
  19 #include <linux/sysdev.h>
  20 #include <linux/errno.h>
  21 #include <linux/slab.h>
  22 #include <linux/delay.h>
  23 #include <linux/clk.h>
  24 #include <linux/err.h>
  25 #include <linux/io.h>
  26
  27 #include <mach/dma.h>
  28 #include <mach/map.h>
  29 #include <mach/irqs.h>
  30
  31 #include <mach/regs-sys.h>
  32
  33 #include <asm/hardware/pl080.h>
  34
  35 /* dma channel state information */
  36
  37 struct s3c64xx_dmac {
  38         struct sys_device        sysdev;
  39         struct clk              *clk;
  40         void __iomem            *regs;
  41         struct s3c2410_dma_chan *channels;
  42         enum dma_ch              chanbase;
  43 };
  44
  45 /* pool to provide LLI buffers */
  46 static struct dma_pool *dma_pool;
  47
  48 /* Debug configuration and code */
  49
  50 static unsigned char debug_show_buffs = 0;
  51
  52 static void dbg_showchan(struct s3c2410_dma_chan *chan)
  53 {
  54         pr_debug("DMA%d: %08x->%08x L %08x C %08x,%08x S %08x\n",
  55                  chan->number,
  56                  readl(chan->regs + PL080_CH_SRC_ADDR),
  57                  readl(chan->regs + PL080_CH_DST_ADDR),
  58                  readl(chan->regs + PL080_CH_LLI),
  59                  readl(chan->regs + PL080_CH_CONTROL),
  60                  readl(chan->regs + PL080S_CH_CONTROL2),
  61                  readl(chan->regs + PL080S_CH_CONFIG));
  62 }
  63
  64 static void show_lli(struct pl080s_lli *lli)
  65 {
  66         pr_debug("LLI[%p] %08x->%08x, NL %08x C %08x,%08x\n",
  67                  lli, lli->src_addr, lli->dst_addr, lli->next_lli,
  68                  lli->control0, lli->control1);
  69 }
  70
  71 static void dbg_showbuffs(struct s3c2410_dma_chan *chan)
  72 {
  73         struct s3c64xx_dma_buff *ptr;
  74         struct s3c64xx_dma_buff *end;
  75
  76         pr_debug("DMA%d: buffs next %p, curr %p, end %p\n",
  77                  chan->number, chan->next, chan->curr, chan->end);
  78
  79         ptr = chan->next;
  80         end = chan->end;
  81
  82         if (debug_show_buffs) {
  83                 for (; ptr != NULL; ptr = ptr->next) {
  84                         pr_debug("DMA%d: %08x ",
  85                                  chan->number, ptr->lli_dma);
  86                         show_lli(ptr->lli);
  87                 }
  88         }
  89 }
  90
  91 /* End of Debug */
  92
  93 static struct s3c2410_dma_chan *s3c64xx_dma_map_channel(unsigned int channel)
  94 {
  95         struct s3c2410_dma_chan *chan;
  96         unsigned int start, offs;
  97
  98         start = 0;
  99
 100         if (channel >= DMACH_PCM1_TX)
 101                 start = 8;
 102
 103         for (offs = 0; offs < 8; offs++) {
 104                 chan = &s3c2410_chans[start + offs];
 105                 if (!chan->in_use)
 106                         goto found;
 107         }
 108
 109         return NULL;
 110
 111 found:
 112         s3c_dma_chan_map[channel] = chan;
 113         return chan;
 114 }
 115
 116 int s3c2410_dma_config(unsigned int channel, int xferunit)
 117 {
 118         struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 119
 120         if (chan == NULL)
 121                 return -EINVAL;
 122
 123         switch (xferunit) {
 124         case 1:
 125                 chan->hw_width = 0;
 126                 break;
 127         case 2:
 128                 chan->hw_width = 1;
 129                 break;
 130         case 4:
 131                 chan->hw_width = 2;
 132                 break;
 133         default:
 134                 printk(KERN_ERR "%s: illegal width %d\n", __func__, xferunit);
 135                 return -EINVAL;
 136         }
 137
 138         return 0;
 139 }
 140 EXPORT_SYMBOL(s3c2410_dma_config);
 141
 142 static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan,
 143                                  struct pl080s_lli *lli,
 144                                  dma_addr_t data, int size)
 145 {
 146         dma_addr_t src, dst;
 147         u32 control0, control1;
 148
 149         switch (chan->source) {
 150         case S3C2410_DMASRC_HW:
 151                 src = chan->dev_addr;
 152                 dst = data;
 153                 control0 = PL080_CONTROL_SRC_AHB2;
 154                 control0 |= PL080_CONTROL_DST_INCR;
 155                 break;
 156
 157         case S3C2410_DMASRC_MEM:
 158                 src = data;
 159                 dst = chan->dev_addr;
 160                 control0 = PL080_CONTROL_DST_AHB2;
 161                 control0 |= PL080_CONTROL_SRC_INCR;
 162                 break;
 163         default:
 164                 BUG();
 165         }
 166
 167         /* note, we do not currently setup any of the burst controls */
 168
 169         control1 = size >> chan->hw_width;      /* size in no of xfers */
 170         control0 |= PL080_CONTROL_PROT_SYS;     /* always in priv. mode */
 171         control0 |= PL080_CONTROL_TC_IRQ_EN;    /* always fire IRQ */
 172         control0 |= (u32)chan->hw_width << PL080_CONTROL_DWIDTH_SHIFT;
 173         control0 |= (u32)chan->hw_width << PL080_CONTROL_SWIDTH_SHIFT;
 174
 175         lli->src_addr = src;
 176         lli->dst_addr = dst;
 177         lli->next_lli = 0;
 178         lli->control0 = control0;
 179         lli->control1 = control1;
 180 }
 181
 182 static void s3c64xx_lli_to_regs(struct s3c2410_dma_chan *chan,
 183                                 struct pl080s_lli *lli)
 184 {
 185         void __iomem *regs = chan->regs;
 186
 187         pr_debug("%s: LLI %p => regs\n", __func__, lli);
 188         show_lli(lli);
 189
 190         writel(lli->src_addr, regs + PL080_CH_SRC_ADDR);
 191         writel(lli->dst_addr, regs + PL080_CH_DST_ADDR);
 192         writel(lli->next_lli, regs + PL080_CH_LLI);
 193         writel(lli->control0, regs + PL080_CH_CONTROL);
 194         writel(lli->control1, regs + PL080S_CH_CONTROL2);
 195 }
 196
 197 static int s3c64xx_dma_start(struct s3c2410_dma_chan *chan)
 198 {
 199         struct s3c64xx_dmac *dmac = chan->dmac;
 200         u32 config;
 201         u32 bit = chan->bit;
 202
 203         dbg_showchan(chan);
 204
 205         pr_debug("%s: clearing interrupts\n", __func__);
 206
 207         /* clear interrupts */
 208         writel(bit, dmac->regs + PL080_TC_CLEAR);
 209         writel(bit, dmac->regs + PL080_ERR_CLEAR);
 210
 211         pr_debug("%s: starting channel\n", __func__);
 212
 213         config = readl(chan->regs + PL080S_CH_CONFIG);
 214         config |= PL080_CONFIG_ENABLE;
 215
 216         pr_debug("%s: writing config %08x\n", __func__, config);
 217         writel(config, chan->regs + PL080S_CH_CONFIG);
 218
 219         return 0;
 220 }
 221
 222 static int s3c64xx_dma_stop(struct s3c2410_dma_chan *chan)
 223 {
 224         u32 config;
 225         int timeout;
 226
 227         pr_debug("%s: stopping channel\n", __func__);
 228
 229         dbg_showchan(chan);
 230
 231         config = readl(chan->regs + PL080S_CH_CONFIG);
 232         config |= PL080_CONFIG_HALT;
 233         writel(config, chan->regs + PL080S_CH_CONFIG);
 234
 235         timeout = 1000;
 236         do {
 237                 config = readl(chan->regs + PL080S_CH_CONFIG);
 238                 pr_debug("%s: %d - config %08x\n", __func__, timeout, config);
 239                 if (config & PL080_CONFIG_ACTIVE)
 240                         udelay(10);
 241                 else
 242                         break;
 243                 } while (--timeout > 0);
 244
 245         if (config & PL080_CONFIG_ACTIVE) {
 246                 printk(KERN_ERR "%s: channel still active\n", __func__);
 247                 return -EFAULT;
 248         }
 249
 250         config = readl(chan->regs + PL080S_CH_CONFIG);
 251         config &= ~PL080_CONFIG_ENABLE;
 252         writel(config, chan->regs + PL080S_CH_CONFIG);
 253
 254         return 0;
 255 }
 256
 257 static inline void s3c64xx_dma_bufffdone(struct s3c2410_dma_chan *chan,
 258                                          struct s3c64xx_dma_buff *buf,
 259                                          enum s3c2410_dma_buffresult result)
 260 {
 261         if (chan->callback_fn != NULL)
 262                 (chan->callback_fn)(chan, buf->pw, 0, result);
 263 }
 264
 265 static void s3c64xx_dma_freebuff(struct s3c64xx_dma_buff *buff)
 266 {
 267         dma_pool_free(dma_pool, buff->lli, buff->lli_dma);
 268         kfree(buff);
 269 }
 270
 271 static int s3c64xx_dma_flush(struct s3c2410_dma_chan *chan)
 272 {
 273         struct s3c64xx_dma_buff *buff, *next;
 274         u32 config;
 275
 276         dbg_showchan(chan);
 277
 278         pr_debug("%s: flushing channel\n", __func__);
 279
 280         config = readl(chan->regs + PL080S_CH_CONFIG);
 281         config &= ~PL080_CONFIG_ENABLE;
 282         writel(config, chan->regs + PL080S_CH_CONFIG);
 283
 284         /* dump all the buffers associated with this channel */
 285
 286         for (buff = chan->curr; buff != NULL; buff = next) {
 287                 next = buff->next;
 288                 pr_debug("%s: buff %p (next %p)\n", __func__, buff, buff->next);
 289
 290                 s3c64xx_dma_bufffdone(chan, buff, S3C2410_RES_ABORT);
 291                 s3c64xx_dma_freebuff(buff);
 292         }
 293
 294         chan->curr = chan->next = chan->end = NULL;
 295
 296         return 0;
 297 }
 298
 299 int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op)
 300 {
 301         struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 302
 303         WARN_ON(!chan);
 304         if (!chan)
 305                 return -EINVAL;
 306
 307         switch (op) {
 308         case S3C2410_DMAOP_START:
 309                 return s3c64xx_dma_start(chan);
 310
 311         case S3C2410_DMAOP_STOP:
 312                 return s3c64xx_dma_stop(chan);
 313
 314         case S3C2410_DMAOP_FLUSH:
 315                 return s3c64xx_dma_flush(chan);
 316
 317         /* belive PAUSE/RESUME are no-ops */
 318         case S3C2410_DMAOP_PAUSE:
 319         case S3C2410_DMAOP_RESUME:
 320         case S3C2410_DMAOP_STARTED:
 321         case S3C2410_DMAOP_TIMEOUT:
 322                 return 0;
 323         }
 324
 325         return -ENOENT;
 326 }
 327 EXPORT_SYMBOL(s3c2410_dma_ctrl);
 328
 329 /* s3c2410_dma_enque
 330  *
 331  */
 332
 333 int s3c2410_dma_enqueue(unsigned int channel, void *id,
 334                         dma_addr_t data, int size)
 335 {
 336         struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 337         struct s3c64xx_dma_buff *next;
 338         struct s3c64xx_dma_buff *buff;
 339         struct pl080s_lli *lli;
 340         unsigned long flags;
 341         int ret;
 342
 343         WARN_ON(!chan);
 344         if (!chan)
 345                 return -EINVAL;
 346
 347         buff = kzalloc(sizeof(struct s3c64xx_dma_buff), GFP_ATOMIC);
 348         if (!buff) {
 349                 printk(KERN_ERR "%s: no memory for buffer\n", __func__);
 350                 return -ENOMEM;
 351         }
 352
 353         lli = dma_pool_alloc(dma_pool, GFP_ATOMIC, &buff->lli_dma);
 354         if (!lli) {
 355                 printk(KERN_ERR "%s: no memory for lli\n", __func__);
 356                 ret = -ENOMEM;
 357                 goto err_buff;
 358         }
 359
 360         pr_debug("%s: buff %p, dp %08x lli (%p, %08x) %d\n",
 361                  __func__, buff, data, lli, (u32)buff->lli_dma, size);
 362
 363         buff->lli = lli;
 364         buff->pw = id;
 365
 366         s3c64xx_dma_fill_lli(chan, lli, data, size);
 367
 368         local_irq_save(flags);
 369
 370         if ((next = chan->next) != NULL) {
 371                 struct s3c64xx_dma_buff *end = chan->end;
 372                 struct pl080s_lli *endlli = end->lli;
 373
 374                 pr_debug("enquing onto channel\n");
 375
 376                 end->next = buff;
 377                 endlli->next_lli = buff->lli_dma;
 378
 379                 if (chan->flags & S3C2410_DMAF_CIRCULAR) {
 380                         struct s3c64xx_dma_buff *curr = chan->curr;
 381                         lli->next_lli = curr->lli_dma;
 382                 }
 383
 384                 if (next == chan->curr) {
 385                         writel(buff->lli_dma, chan->regs + PL080_CH_LLI);
 386                         chan->next = buff;
 387                 }
 388
 389                 show_lli(endlli);
 390                 chan->end = buff;
 391         } else {
 392                 pr_debug("enquing onto empty channel\n");
 393
 394                 chan->curr = buff;
 395                 chan->next = buff;
 396                 chan->end = buff;
 397
 398                 s3c64xx_lli_to_regs(chan, lli);
 399         }
 400
 401         local_irq_restore(flags);
 402
 403         show_lli(lli);
 404
 405         dbg_showchan(chan);
 406         dbg_showbuffs(chan);
 407         return 0;
 408
 409 err_buff:
 410         kfree(buff);
 411         return ret;
 412 }
 413
 414 EXPORT_SYMBOL(s3c2410_dma_enqueue);
 415
 416
 417 int s3c2410_dma_devconfig(unsigned int channel,
 418                           enum s3c2410_dmasrc source,
 419                           unsigned long devaddr)
 420 {
 421         struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 422         u32 peripheral;
 423         u32 config = 0;
 424
 425         pr_debug("%s: channel %d, source %d, dev %08lx, chan %p\n",
 426                  __func__, channel, source, devaddr, chan);
 427
 428         WARN_ON(!chan);
 429         if (!chan)
 430                 return -EINVAL;
 431
 432         peripheral = (chan->peripheral & 0xf);
 433         chan->source = source;
 434         chan->dev_addr = devaddr;
 435
 436         pr_debug("%s: peripheral %d\n", __func__, peripheral);
 437
 438         switch (source) {
 439         case S3C2410_DMASRC_HW:
 440                 config = 2 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
 441                 config |= peripheral << PL080_CONFIG_SRC_SEL_SHIFT;
 442                 break;
 443         case S3C2410_DMASRC_MEM:
 444                 config = 1 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
 445                 config |= peripheral << PL080_CONFIG_DST_SEL_SHIFT;
 446                 break;
 447         default:
 448                 printk(KERN_ERR "%s: bad source\n", __func__);
 449                 return -EINVAL;
 450         }
 451
 452         /* allow TC and ERR interrupts */
 453         config |= PL080_CONFIG_TC_IRQ_MASK;
 454         config |= PL080_CONFIG_ERR_IRQ_MASK;
 455
 456         pr_debug("%s: config %08x\n", __func__, config);
 457
 458         writel(config, chan->regs + PL080S_CH_CONFIG);
 459
 460         return 0;
 461 }
 462 EXPORT_SYMBOL(s3c2410_dma_devconfig);
 463
 464
 465 int s3c2410_dma_getposition(unsigned int channel,
 466                             dma_addr_t *src, dma_addr_t *dst)
 467 {
 468         struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 469
 470         WARN_ON(!chan);
 471         if (!chan)
 472                 return -EINVAL;
 473
 474         if (src != NULL)
 475                 *src = readl(chan->regs + PL080_CH_SRC_ADDR);
 476
 477         if (dst != NULL)
 478                 *dst = readl(chan->regs + PL080_CH_DST_ADDR);
 479
 480         return 0;
 481 }
 482 EXPORT_SYMBOL(s3c2410_dma_getposition);
 483
 484 /* s3c2410_request_dma
 485  *
 486  * get control of an dma channel
 487 */
 488
 489 int s3c2410_dma_request(unsigned int channel,
 490                         struct s3c2410_dma_client *client,
 491                         void *dev)
 492 {
 493         struct s3c2410_dma_chan *chan;
 494         unsigned long flags;
 495
 496         pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n",
 497                  channel, client->name, dev);
 498
 499         local_irq_save(flags);
 500
 501         chan = s3c64xx_dma_map_channel(channel);
 502         if (chan == NULL) {
 503                 local_irq_restore(flags);
 504                 return -EBUSY;
 505         }
 506
 507         dbg_showchan(chan);
 508
 509         chan->client = client;
 510         chan->in_use = 1;
 511         chan->peripheral = channel;
 512
 513         local_irq_restore(flags);
 514
 515         /* need to setup */
 516
 517         pr_debug("%s: channel initialised, %p\n", __func__, chan);
 518
 519         return chan->number | DMACH_LOW_LEVEL;
 520 }
 521
 522 EXPORT_SYMBOL(s3c2410_dma_request);
 523
 524 /* s3c2410_dma_free
 525  *
 526  * release the given channel back to the system, will stop and flush
 527  * any outstanding transfers, and ensure the channel is ready for the
 528  * next claimant.
 529  *
 530  * Note, although a warning is currently printed if the freeing client
 531  * info is not the same as the registrant's client info, the free is still
 532  * allowed to go through.
 533 */
 534
 535 int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client)
 536 {
 537         struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 538         unsigned long flags;
 539
 540         if (chan == NULL)
 541                 return -EINVAL;
 542
 543         local_irq_save(flags);
 544
 545         if (chan->client != client) {
 546                 printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n",
 547                        channel, chan->client, client);
 548         }
 549
 550         /* sort out stopping and freeing the channel */
 551
 552
 553         chan->client = NULL;
 554         chan->in_use = 0;
 555
 556         if (!(channel & DMACH_LOW_LEVEL))
 557                 s3c_dma_chan_map[channel] = NULL;
 558
 559         local_irq_restore(flags);
 560
 561         return 0;
 562 }
 563
 564 EXPORT_SYMBOL(s3c2410_dma_free);
 565
 566 static irqreturn_t s3c64xx_dma_irq(int irq, void *pw)
 567 {
 568         struct s3c64xx_dmac *dmac = pw;
 569         struct s3c2410_dma_chan *chan;
 570         enum s3c2410_dma_buffresult res;
 571         u32 tcstat, errstat;
 572         u32 bit;
 573         int offs;
 574
 575         tcstat = readl(dmac->regs + PL080_TC_STATUS);
 576         errstat = readl(dmac->regs + PL080_ERR_STATUS);
 577
 578         for (offs = 0, bit = 1; offs < 8; offs++, bit <<= 1) {
 579                 struct s3c64xx_dma_buff *buff;
 580
 581                 if (!(errstat & bit) && !(tcstat & bit))
 582                         continue;
 583
 584                 chan = dmac->channels + offs;
 585                 res = S3C2410_RES_ERR;
 586
 587                 if (tcstat & bit) {
 588                         writel(bit, dmac->regs + PL080_TC_CLEAR);
 589                         res = S3C2410_RES_OK;
 590                 }
 591
 592                 if (errstat & bit)
 593                         writel(bit, dmac->regs + PL080_ERR_CLEAR);
 594
 595                 /* 'next' points to the buffer that is next to the
 596                  * currently active buffer.
 597                  * For CIRCULAR queues, 'next' will be same as 'curr'
 598                  * when 'end' is the active buffer.
 599                  */
 600                 buff = chan->curr;
 601                 while (buff && buff != chan->next
 602                                 && buff->next != chan->next)
 603                         buff = buff->next;
 604
 605                 if (!buff)
 606                         BUG();
 607
 608                 if (buff == chan->next)
 609                         buff = chan->end;
 610
 611                 s3c64xx_dma_bufffdone(chan, buff, res);
 612
 613                 /* Free the node and update curr, if non-circular queue */
 614                 if (!(chan->flags & S3C2410_DMAF_CIRCULAR)) {
 615                         chan->curr = buff->next;
 616                         s3c64xx_dma_freebuff(buff);
 617                 }
 618
 619                 /* Update 'next' */
 620                 buff = chan->next;
 621                 if (chan->next == chan->end) {
 622                         chan->next = chan->curr;
 623                         if (!(chan->flags & S3C2410_DMAF_CIRCULAR))
 624                                 chan->end = NULL;
 625                 } else {
 626                         chan->next = buff->next;
 627                 }
 628         }
 629
 630         return IRQ_HANDLED;
 631 }
 632
 633 static struct sysdev_class dma_sysclass = {
 634         .name           = "s3c64xx-dma",
 635 };
 636
 637 static int s3c64xx_dma_init1(int chno, enum dma_ch chbase,
 638                              int irq, unsigned int base)
 639 {
 640         struct s3c2410_dma_chan *chptr = &s3c2410_chans[chno];
 641         struct s3c64xx_dmac *dmac;
 642         char clkname[16];
 643         void __iomem *regs;
 644         void __iomem *regptr;
 645         int err, ch;
 646
 647         dmac = kzalloc(sizeof(struct s3c64xx_dmac), GFP_KERNEL);
 648         if (!dmac) {
 649                 printk(KERN_ERR "%s: failed to alloc mem\n", __func__);
 650                 return -ENOMEM;
 651         }
 652
 653         dmac->sysdev.id = chno / 8;
 654         dmac->sysdev.cls = &dma_sysclass;
 655
 656         err = sysdev_register(&dmac->sysdev);
 657         if (err) {
 658                 printk(KERN_ERR "%s: failed to register sysdevice\n", __func__);
 659                 goto err_alloc;
 660         }
 661
 662         regs = ioremap(base, 0x200);
 663         if (!regs) {
 664                 printk(KERN_ERR "%s: failed to ioremap()\n", __func__);
 665                 err = -ENXIO;
 666                 goto err_dev;
 667         }
 668
 669         snprintf(clkname, sizeof(clkname), "dma%d", dmac->sysdev.id);
 670
 671         dmac->clk = clk_get(NULL, clkname);
 672         if (IS_ERR(dmac->clk)) {
 673                 printk(KERN_ERR "%s: failed to get clock %s\n", __func__, clkname);
 674                 err = PTR_ERR(dmac->clk);
 675                 goto err_map;
 676         }
 677
 678         clk_enable(dmac->clk);
 679
 680         dmac->regs = regs;
 681         dmac->chanbase = chbase;
 682         dmac->channels = chptr;
 683
 684         err = request_irq(irq, s3c64xx_dma_irq, 0, "DMA", dmac);
 685         if (err < 0) {
 686                 printk(KERN_ERR "%s: failed to get irq\n", __func__);
 687                 goto err_clk;
 688         }
 689
 690         regptr = regs + PL080_Cx_BASE(0);
 691
 692         for (ch = 0; ch < 8; ch++, chno++, chptr++) {
 693                 printk(KERN_INFO "%s: registering DMA %d (%p)\n",
 694                        __func__, chno, regptr);
 695
 696                 chptr->bit = 1 << ch;
 697                 chptr->number = chno;
 698                 chptr->dmac = dmac;
 699                 chptr->regs = regptr;
 700                 regptr += PL080_Cx_STRIDE;
 701         }
 702
 703         /* for the moment, permanently enable the controller */
 704         writel(PL080_CONFIG_ENABLE, regs + PL080_CONFIG);
 705
 706         printk(KERN_INFO "PL080: IRQ %d, at %p\n", irq, regs);
 707
 708         return 0;
 709
 710 err_clk:
 711         clk_disable(dmac->clk);
 712         clk_put(dmac->clk);
 713 err_map:
 714         iounmap(regs);
 715 err_dev:
 716         sysdev_unregister(&dmac->sysdev);
 717 err_alloc:
 718         kfree(dmac);
 719         return err;
 720 }
 721
 722 static int __init s3c64xx_dma_init(void)
 723 {
 724         int ret;
 725
 726         printk(KERN_INFO "%s: Registering DMA channels\n", __func__);
 727
 728         dma_pool = dma_pool_create("DMA-LLI", NULL, sizeof(struct pl080s_lli), 16, 0);
 729         if (!dma_pool) {
 730                 printk(KERN_ERR "%s: failed to create pool\n", __func__);
 731                 return -ENOMEM;
 732         }
 733
 734         ret = sysdev_class_register(&dma_sysclass);
 735         if (ret) {
 736                 printk(KERN_ERR "%s: failed to create sysclass\n", __func__);
 737                 return -ENOMEM;
 738         }
 739
 740         /* Set all DMA configuration to be DMA, not SDMA */
 741         writel(0xffffff, S3C_SYSREG(0x110));
 742
 743         /* Register standard DMA controlers */
 744         s3c64xx_dma_init1(0, DMACH_UART0, IRQ_DMA0, 0x75000000);
 745         s3c64xx_dma_init1(8, DMACH_PCM1_TX, IRQ_DMA1, 0x75100000);
 746
 747         return 0;
 748 }
 749
 750 arch_initcall(s3c64xx_dma_init);